Bluetooth Enabled Hands-Free Kit / Headset
Contents
1. press ACCESS button The phone is now searching for devices When the search is complete Devices disc is displayed as title If the device you are looking for is not on the list repeat the procedure by pressing the OPTIONS and REPEAT buttons Then press SELECT to add the device The phone will initiate connection with the headset 6 Pls enter BT pin for OK Enter 0000 as the BT pin then press OK Handsfree trusted will be displayed afterwards indicating that the pairing is completed 7 Continue pressing the On Off End Key to exit the Menu The headset is paired and ready to use An icon will be displayed during the standby mode indicating that the headset is linked with the phone 18 c ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard from the phone 1 Press the multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call To transfer the call to the headset press the multi function button once MAKING A CALL with the headset on Normal dialing 1 Enter the contact number and send To transfer audio on the headset press the multi function button once 2 Press the multi function button again to hang up and terminate the call Note If the call is terminated using the cellular phone no tone will be heard on the headset indicating that the call has been terminated V2. 7 Press Back then Exit to exit the Menu The headset is paired and ready to use An icon will be displayed during the standby mode indicating that the headset is linked with the phone Note Once paired the headset and the phone have simultaneous connection with each other keypad tones can be heard on the headset every time the keypad is pressed AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth headset 1 Press Menu Scroll to Bluetooth SELECT Scroll to View paired devices SELECT 2 Select the headset and press OPTIONS Scroll to Request conn authorisation SELECT No SELECT 3 Continue pressing Back button to exit the Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Bluetooth View paired devices Select 8910 10 4 Options ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the headset as well as on the phone 1 Press the multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio is still transferred to the headset MAKING A CALL with the headset on Normal dialing T Enter the contact number and send As you dial audio and the keypad tones can be heard on the headset simultaneously
3. SELECT Press Q button Paired devices will be displayed as title Press OPTIONS New paired device SELECT Searching for devices will be displayed Select the headset and press SELECT Waiting for and Passcode for will be displayed simultaneously 6 Enter 0000 as the passcode then press OK Waiting for and Pairing with complete will be displayed simultaneously 7 Continue pressing Exit key to exit the Menu The headset is paired and ready to use An icon will be displayed during the standby mode indicating that the headset is linked with the phone Note Once paired press the multi function button once to establish simultaneous connection between the headset and the phone keypad tones can be heard on the headset every time the keypad is pressed If ever the paired device was deleted and turned off once it is turned on there is no need to undergo the same pairing procedure Passcode for will be displayed Enter the passcode then press OK Accept connection request from press YES to reconnect AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth headset 1 Press the Menu 2 5 button Scroll to Connect OPTIONS Choose Open press SELECT Bluetooth OPTIONS Open SELECT Press button Paired devices will be
4. as the passkey If the pairing is successful the alternating red blue lights will stop Press YES to confirm the name of the device If the pairing is unsuccessful the steps above may be repeated 8 Continue pressing NO to exit the menu key The unit is now ready to link calls from the phone directly to the headset An icon will appear during the standby mode indicating that the headset is linked with the phone ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the headset 1 Just press the multi function button down once to answer the call Pressing the button again will hang up and terminate the call 2 If you wish to answer a call on the cellular phone just press YES and the call is automatically transferred to the phone Pressing the multi function button transfers the call on the headset To terminate the call press the multi function button again MAKING A CALL with the headset on Normal dialing 1 Enter the contact number and press YES Audio can be heard on the headset at the same time a question will be displayed Retrieve call in phone ignoring or pressing No transfers the call to the headset Pressing Yes transfers the call to the cell phone 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step f and g for the procedure when activating and recording for voice dialing 1 Press the multi function button once to activate
5. 6 1 2 Note Record your voice command in a quiet place so that only your voice will be recorded on the phone USING WITH SONY ERICSSON T39m ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press the Menu Key Scroll to Extras and press YES Select Operation mode YES On YES 2 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Extras Bluetooth Operation mode __T39m 5 6 4 PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the headset 2 Detach the headset from the holster base 3 Turn off the headset 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink Press the multi function button once headset mode This indicates that the unit is now ready for pairing 5 Press the Menu Key Scroll to Extras YES Select Bluetooth YES Select Paired devices YES Add device YES Choose Phone initiates YES Choose Headset YES The phone will then search the device to be added After the device is found press YES QUICK ACCESS for steps 5 and 6 Press Menu then follow the sequence of numbers below Paired Add Phone Extras Bluetooth devices device initiates Headset T39m 5
6. Bluetooth devices is displayed as sub title Tap Add The phone is now searching for pairable devices 6 Tap the device you want to pair with Bonding in progress will be displayed on screen The phone will then ask for the pass key 7 Tap E on the lower left corner of the screen Enter 0000 as the passkey and tap Done Tap Done under the sub title Secure Connection If the pairing is successful the alternating red blue lights will stop 8 Tap 88 to exit and return to the Applications mode If the pairing is unsuccessful the steps above may be repeated The unit is now ready to link calls from the phone directly to the headset An icon will appear during the standby mode indicating that the headset is linked with the phone ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the headset 1 Just press the multi function button down once to answer the call Pressing the button again will hang up and terminate the call 2 If you wish to answer a call on the cellular phone just press YES and the call is automatically transferred to the phone Pressing the multi function button transfers the call on the headset To terminate the call press the multi function button again 9 d MAKING A CALL with the headset on Normal dialing T Enter the contact number and press OK Sound is automatically transferred to the headset 2 Press the multi function button to hang up and te
7. Select Contacts YES Add voice YES 2 Find a contact name and follow the instructions in the display An icon will appear next to a contact name which has a voice command 3 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Settings Voicecontrol Voicecommands Contacts T39m_ 4 9 2 4 Note Noisy environment may affect voice recognition Record your voice in a quiet environment USING WITH SONY ERICSSON P800 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 On the Applications window flip open mode scroll and tap Contol Panel using the stylus Go to Connections Tap Bluetooth Go to Settings On the Operation mode tap On 2 Tap E to exit and return to the Applications window PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the headset 2 Detach the headset from the holster base 3 Turn off the headset 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink Press the multi function button once headset mode This indicates that the unit is now ready for pairing 5 On the Applications window flip open mode scroll and tap Control Panel Go to Connections Tap Bluetooth
8. charge it immediately by putting it back to the main unit 3 Turn the headset OFF by pressing the multi function button for more than 4 seconds or more depending on the phone A high low tone will then be heard and the indicator light becomes red then turns off after a few seconds 4 Wait at least 4 seconds before turning the headset ON again REMARK When the cell phone is not detected for more than 5 minutes if used as a stand alone headset or docked and no power from the Cigarette lighter plug it will turn off automatically to conserve battery life C OPERATIONS Before use the headset must be paired with the phone Pairing is done only once After being paired the phone and the headset will be automatically connected anytime when the phone is used Please see Headset Operations for Popular Cell Phones section on page 4 for instructions D NSTALLI NG THE MI CROPHONE Put two 2 AAA Alkaline batteries in the wireless microphone The negative polarity of the batteries must be in the spring side Note Microphone battery life is more than 500 calls if 3 calls day battery life more than 5 months 2 itis highly recommended that you attach your microphone to the sun visor Please make sure that it does not hide the microphone otherwise your voice will be attenuated 3 Turn ON the microphone by using the power switch Microphone Indicator low battery normal MICROPHONE l va Dee ANTENNA WIRE
9. check and activate the voice dialing feature Tap the box aligned to Play caller name so that the name will be played back to you 4 Tap Done on the on screen button when finished 5 On the Preferences mode tap Done again 6 Tap 88 to exit and return to the Applications mode RECORDING FOR VOICE DIALING The voice dialing feature is only applicable to contacts saved to phone memory 1 Onthe Applications window flip open mode tap Contacts 2 Tap the contact_where you want to add a voice dialing feature Tap Edit Scroll to Edit Contact Tap on the on screen buttons 3 Tap Record Speak after tone will be displayed on the screen 4 Record your voice To check if your recording is of good quality tap Play If not tap Record again Press Done when finished 5 Tap G5 to make another record and repeat the steps above To return to the Applications window tap 88 button Note Noisy environment may affect voice recognition Record your voice in a quiet environment USING WITH SONY ERICSSON T610 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Go the Menu Key by pressing the joystick Scroll to Connectivity SELECT Select Bluetooth SELECT Turn On SELECT 2 Continue pressing gt to exit PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the car kit 2 Detach the headse
10. displayed as title 2 Select the headset and press OPTIONS Scroll to Set as authorised SELECT Connections will take place without confirmation Continue press YES 3 Continue pressing Exit key to exit the Menu An icon will then appear on the upper right corner ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the headset as well as on the phone 1 Press the multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio is still transferred to the headset MAKING A CALL with the headset on Normal dialing 1 Enter the contact number and send As you dial audio and the keypad tones can be heard on the headset simultaneously but not on the phone 2 Press the multi function button to hang up and terminate the call Note If the call is terminated using the cellular phone a tone will be heard on the headset indicating that the call has been terminated Voice dialing Refer to step g for the procedure when recording for voice dialing P Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the headset prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps ab
11. nsssssssssnssrserisrrerrsrrrrrerrsrrnreerren 14 f g h Rejecting a Call Setting the Volume Recording for Voice Dialing Nokia 8910i FarmpopoTp Nokia 365 sa 7oaoop Activating the Bluetooth Pairing to the Cellular Phone Auto Accept Mode Answering Receiving a Call Making a Call with the headset on Rejecting a Call Setting the Volume Recording for Voice Dialing 0 Activating the Bluetooth Pairing to the Cellular Phone Auto Accept Mode Answering Receiving a Call Making a Call with the headset on Rejecting a Call Setting the Volume Recording for Voice Dialing Siemens S55 e gt eaocp Activating the Bluetooth Pairing to the Cellular Phone Answering Receiving a Call Making a Call with the headset on Rejecting a Call Setting the Volume Recording for Voice Dialing Suggested Pairing Modes Cell Phone Models Pairing Mode Headset Handsfree Ericsson T68 Ericsson T68i R6 and below Ericsson T68i R7 K Ericsson T39m Ericsson P800 KK IAA Ericsson T610 Nokia 6310 6310i Nokia 8910 Nokia 8910i Nokia 3650 Siemens S55 NINNIN NIN 14 14 15 15 15 15 16 16 16 16 16 16 17 17 17 17 18 18 18 18 18 19 19 19 19 19 a USING WITH SONY ERICSSON T68 T68i ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Blu
12. the voice dialing 2 A beep will then be heard on the headset prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call h Redialing For T68i R6 and R7 press the multi function button twice Call is automatically transferred on the headset REJECTING A CALL For T68i R6 and R7 press the multi function button twice to reject the incoming call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls only 1 Press it clockwise to increase the volume 2 Decreases the volume by pressing it counter clockwise Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling sound echo or background noise during calls on some cell phones Note Volume keys of the cellular phone can also be used to set the volume ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing Before voice dialing you must first turn on the name dialing function and record your voice To turn voice dialing on and record number types Using T68 Sony Ericsson 1 Go to the Menu Key by pressing the joystick Scroll to Sett
13. 4 for saving and activating voice tags The steps are 1 Press the line pick up button 4 once on the main unit or the multi function button 8 to activate the voice dialing 2 A beep will then be heard prompting the user to say the name of the person to call 3 Say the name The name will be played back to you 4 The phone will then place the call automatically In case the phone does not recognize the name spoken the steps above may be repeated 5 Press the button again to terminate the call If the desired number to be dialed has no voice tag normal dialing can also be done using the keypad on the phone Please refer to the Headset Operations for Popular Cell Phones section on page 4 for additional information Important Remark On some versions of Nokia s software the headset car kit will not connect automatically to the cell phone You will need to press the multi function button once to connect it to the cell phone HEADSET OPERATIONS FOR POPULAR CELL PHONES Note 1 If your phone is not included on the following list of this manual kindly refer to the manual of your phone Note 2 Softwares and menus could be modified by the cell phone s manufacturers without prior notice If the manual does not match with your cell phone operations kindly refer to the manual of your cell phone Sony Ericsson T68 T68i a Activating the Bluetooth 6 b Pairing to the Cellular Phone 6 c Answering Receiving a Call 6 d Making
14. 6 2 Yes 1 2 6 Enter 0000 as the passkey If the pairing is successful the alternating red blue lights will stop Press YES to confirm the name of the device If the pairing is unsuccessful the steps above may be repeated 7 Continue pressing NO to exit the menu key The unit is now ready to link calls from the phone directly to the headset ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the headset 1 Just press the multi function button down once to answer the call Pressing the button again will hang up and terminate the call 2 If you wish to answer a call on the cellular phone just press YES and the call is automatically transferred to the phone Pressing the multi function button transfers the call on the headset 3 To terminate the call press the multi function button again MAKING A CALL with the headset on Normal dialing 1 Enter the contact number and press YES Audio can be heard on the headset at the same time a question will be displayed Retrieve call in phone ignoring or pressing No transfers the call to the headset Pressing Yes transfers the call to the cell phone 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step f and g for the procedure when activating and recording for voice dialing a Press the multi function button once to activate the voice dialing 2 A beep will then be hea
15. IRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the headset 2 Detach the headset from the holster base 3 Turn off the headset 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink This indicates that the headset is now ready for pairing 5 Press Menu Scroll to Connectivity SELECT Bluetooth SELECT and scroll to Search for audio accessories SELECT The phone is now searching for Bluetooth devices SELECT the headset The phone will initiate connection with the headset QUICK ACCESS for step 5 Press Menu followed by the sequence of numbers below Connectivity Bluetooth Search for audio accessories 8910i 10 1 2 6 Enter 0000 as the passcode then press OK The phone is now connected with the headset 7 Continue pressing the Back button to exit the Menu The headset is paired and ready to use An icon will be displayed during the standby mode indicating that the headset is linked with the phone Note Once paired the headset and the phone have simultaneous connection with each other keypad tones can be heard on the headset every time the keypad is pressed AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a
16. ME There are two volume controls on the unit One is on the main unit which is the speaker volume 10 and controls only the main speaker 6 The other is on the headset which is the multi function button 8 and sets both the earphone 11 and the main speaker 6 2 The headset volume control is digital and is combined with the multi function button 8 Pressing it clockwise increases the volume Counter clockwise decreases it Continuous pressing of the digital volume control can also rapidly set the volume Please refer to the Headset Operations for Popular Cell Phones section on page 4 for additional information During a communication pick up the earphone and adjust it s volume 8 Replace the earphone on the base and adjust the speaker volume 10 If the volume is too high it can cause feedback whistling sound echo or background noise during calls on some cell phones G ANSWERING RECEIVING A CALL When the phone is receiving a call the phone ring tone will be heard on the hands free kit or on the headset Just press button 4 on the main unit or button 8 on the headset once to answer the call Pressing the button again will hang up and terminates the call Please refer to the Headset Operations for Popular Cell Phones section on page 4 for additional information H MAKING A CALL Calling through the hands free kit can be done using voice tags refer to the Headset Operations for Popular Cell Phones section on page
17. OPERATING MANUAL Bluetooth Enabled Hands Free Kit Headset Version 3 0 OVERVIEW This unit uses Bluetooth technology that allows wireless communications on devices such as cellular phones This is designed to be a totally wireless hands free car kit or a stand alone wireless headset This provides the user to operate a cellular phone inside the car while driving and can also be used anywhere by detaching the earpiece and becomes a stand alone Bluetooth headset The unit will work on all Bluetooth cellular phones provided that they respect the Bluetooth protocol A ILLUSTRATIONS Magnet Charging Pins Charge Power Indicator Line Pick up Button Cigarette Lighter Plug Main Speaker Ear Hook Multi function Button Talk Power Volume Microphone Indicator lights 10 Speaker Volume 11 Earphone OONDORWNM B TURNING ON OFF THE UNIT There are two ways to turn ON OFF the unit depending on how it is being used When used as a hands free car kit plugging it in the cigarette lighter plug 5 activates the unit When used as headset follow the steps below a Press the multi function button for 2 seconds A low high tone will then be heard and a blue light will show 2 Release the button and the indicator light will blink The headset is now ready and is waiting for a call standby mode Note If the indicator becomes red it means that the battery on the headset is low Re
18. Power au ON OFF gt SUN VISOR ANTENNA z CLIP Clip REMARKS If microphone is not ON during the communication the sound on the speaker will be attenuated g In standby mode the microphone will still have a small consumption less the 1 8 microwatts On some versions the indicator light will only turn ON for 2 seconds after the microphone is switched ON If the light is red this indicates low battery The microphone is activated by the Hands Free Kit base and can remain in ON position even if not used but in order to extend your battery life it is recommended to switch OFF your microphone when not using for a long time E FUNCTION CONTROLS Adjust the Function Controls as recommended 1 Tone Control H for High Tone L for Low Tone 2 ASP Control ON Echo and Feedback Canceller OFF Echo Reducer only 3 Adjustable Microphone Gain MIC Control H for high gain L for low gain L is necessary in noisy background Control Switches The Microphone gain must be adjusted to match with your cell phone model If the gain is too high it can cause feedback whistling sound echo or background noise during calls on some cell phones Recommended Function Controls Note Setting Working on all models On high background environment MIC L If you experience audio level ASP z ON fluctuation turn ASP OFF TOE H F SETTING THE VOLU
19. a Call with the headset on 6 e Rejecting a Call 7 f Setting the Volume 7 g Activating the Voice Dialing 7 h Recording for Voice Dialing 7 Sony Ericsson T39m a Activating the Bluetooth 8 b Pairing to the Cellular Phone 8 c Answering Receiving a Call 8 d Making a Call with the headset on 8 e Setting the Volume 8 f Activating the Voice Dialing 9 g Recording for Voice Dialing 9 Sony Ericsson P800 a Activating the Bluetooth 9 b Pairing to the Cellular Phone 9 c Answering Receiving a Call 9 d Making a Call with the headset on 10 e Setting the Volume 10 f Activating the Voice Dialing 10 g Recording for Voice Dialing 10 Sony Ericsson T610 a Activating the Bluetooth 10 b Pairing to the Cellular Phone 10 c Answering Receiving a Call 11 d Making a Call with the headset on 11 e Rejecting a Call 11 f Setting the Volume 11 g Activating the Voice Dialing 11 h Recording for Voice Dialing 11 Nokia 6310 6310i a Activating the Bluetooth 12 b Pairing to the Cellular Phone 12 c Auto Accept Mode 12 d Answering Receiving a Call 12 e Making a Call with the headset on 12 f Rejecting a Call 13 g Setting the Volume 13 h Recording for Voice Dialing 13 Nokia 8910 a Activating the Bluetooth hase eeeee cece cess sees eeeee eee eeee een enone 13 b Pairing to the Cellular Phone os eee cece eeeeeeeeeeeeeeeeeeeaeeeeetaeeeeenaees 13 Cc Auto Accept Mode 14 d Answering Receiving a Call A a 14 e Making a Call with the headset On
20. a quiet place so that only your voice will be recorded on the phone USING WITH NOKIA 8910 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press Menu Scroll to Bluetooth SELECT Press SELECT again 2 Choose On SELECT An icon will appear on the upper left corner 3 Press Back then Exit to exit the Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Bluetooth Select On Select 8910 10 1 1 1 PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the headset 2 Detach the headset from the holster base 3 Turn off the headset 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink This indicates that the headset is now ready for pairing 13 5 Press Menu Scroll to Bluetooth SELECT and Search for audio accessories SELECT The phone is now scanning for Bluetooth devices SELECT the headset The phone will initiate connection with the headset QUICK ACCESS for step 5 Press Menu followed by the sequence of numbers below Bluetooth Search for audio accessories 8910 10 2 6 Enter 0000 as the passcode then press OK The volume level will be displayed The phone is now connected with the headset
21. but not on the phone 2 Press the multi function button to hang up and terminate the call Note If the call is terminated using the cellular phone a tone will be heard on the headset indicating that the call has been terminated Voice dialing Refer to step g for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the headset prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing Press quickly the multi function button twice to redial the last number REJECTING A CALL Press the multi function button twice to reject the incoming call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls or every time a key is pressed on your cell phone 1 Press it clockwise to increase the volume 2 Decrease the volume by pressing it counter clockwise 14 As you press the button the volume level is simultaneously displayed on the cellular phone Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling so
22. call via the Bluetooth headset 1 Press Menu Scroll to Connectivity SELECT Bluetooth SELECT Scroll to View paired devices SELECT 2 Select the headset and press OPTIONS Scroll to Request conn authorisation SELECT No SELECT 3 Continue pressing Back button to exit the Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Connectivity Bluetooth View paired devices Select 8910i 10 1 4 Options ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the headset as well as on the phone 1 Press the multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio is still transferred to the headset MAKING A CALL with the headset on Normal dialing 1 Enter the contact number and send As you dial audio and the keypad tones can be heard on the headset simultaneously but not on the phone 2 Press the multi function button to hang up and terminate the call Note If the call is terminated using the cellular phone a tone will be heard on the headset indicating that the call has been terminated Voice dialing Refer to step g for the procedure when recording for voice dialing fl Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the headset prompting the user to say the name of the person t
23. cord your contact names and numbers in the Address book phone memory 1 From standby mode open the Address book by pressing the arrow down key d If Phone book is the one displayed press f Sf5 key to switch to Address book 2 Select a contact name OPTIONS 3 Scroll to Voice dialing SELECT New SELECT Recording for contact name YES Follow the instructions Your voice is automatically saved on the phone after being played back to you 4 In case you wish to change your recorded voice press Options button Voice tags SELECT Change SELECT Instructions appear 5 Press On Off End key to exit Note Noisy environment may affect voice recognition Record your voice in a quiet place Hereby Euro Communication Equipements sas declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC This equipment can be used in all European countries An individual license is required in Romania
24. cord your voice To turn voice dialing on and record number types 1 Go to the Menu Key by pressing the joystick Scroll to Settings SELECT Voice control SELECT Voice dialing SELECT 2 Choose On SELECT 3 Continue pressing to exit RECORDING FOR VOICE DIALING 1 Go to the Menu Key by pressing the joystick Scroll to Settings and press SELECT Choose Voice control SELECT then go to Voice dialing SELECT Edit name SELECT New voice ADD 2 Find a contact then press SELECT 3 Follow the instructions that is displayed Voice is automatically saved on the phone An icon will appear next to a contact name which has a voice command 4 Continue pressing to exit Note Noisy environment may affect voice recognition Record your voice in a quiet environment USING WITH NOKIA 6310 6310i ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press the Menu button Scroll to Bluetooth SELECT Press SELECT again 2 Choose On SELECT An icon will appear on the upper left corner 3 Press Back then Exit to exit the Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Bluetooth Select On Select 6310 10 1 1 1 6310i 11 1 1 1 PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the headset 2 Detach the headset from the holster base 3 Turn off the head
25. e clearly Voice tag saved is displayed indicating that the voice tag has been saved 4 In case you wish to change your recorded voice press Names Voice tags SELECT Scroll to the name whom you want to change the voice tag then press Options Change SELECT Follow the instructions 5 Continue pressing Back button to exit Note Noisy environment could affect voice recognition Record voice in a quiet environment USING WITH NOKIA 3650 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 16 1 Press the Menu amp button Scroll to Connect OPTIONS A list of options will be displayed Choose OPEN then press SELECT Choose Bluetooth OPTIONS Choose OPEN and press SELECT 2 Bluetooth will be displayed Press OPTIONS Change SELECT Choose On then press OK 3 Continue pressing Exit key to exit the Menu PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the headset 2 Detach the headset from the holster base 3 Turn off the headset 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink This indicates that the headset is now ready for pairing 5 Press the Menu 8 button Scroll to Connect OPTIONS Choose Open press SELECT Bluetooth OPTIONS Open
26. e may be repeated 4 Press the button again to terminate the call Redialing Press quickly the multi function button twice to redial the last number REJECTING A CALL Press the multi function button twice to reject the incoming call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls or every time a key is pressed on your cell phone 1 Press it clockwise to increase the volume 2 Decrease the volume by pressing it counter clockwise As you press the button the volume level is simultaneously displayed on the cellular phone Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling sound echo or background noise during calls Note It is also possible to use the volume keys of the cellular phone to set the volume RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 Press the Names button Search SELECT Press List button 2 Find a contact name Press Details button 3 Press Options button Add voice tag SELECT Instructions appear Your voice is automatically saved on the phone after being played back to you 4 In case you wish to change your recorded voice press Options button Voice tags SELECT Change SELECT Instructions appear 5 Continue pressing Back button to exit Note Record your voice command in
27. etooth devices 1 Go the Menu Key by pressing the joystick Scroll to Connect YES Select Bluetooth YES Select Options YES Operation mode YES On YES 2 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Connect Bluetooth Options Operation mode T68 8 3 2 T68i 8 4 or 3 for T68i R7 4 1 PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the headset 2 Detach the headset from the holster base 3 Turn off the headset 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink This indicates that the unit is now ready for pairing For T68 and T68i older versions R6 and below press the multi function button again headset mode Go the Menu Key by pressing the joystick Scroll to Connect YES Select Bluetooth YES Select Paired devices YES Add device YES Choose Phone initiates YES Choose Headset Handsfree YES The phone will then search the device to be added After the device is found press YES QUICK ACCESS for steps 5 and 6 Press Menu then follow the sequence of numbers below on Paired Add Phone Headset Connect Blutooth devices device initiates Handsfree T68 8 3 2 Yes 1 2 T68i 8 4 or3 for T68i R7 2 Yes 1 2 7 Enter 0000
28. headset on Normal dialing 1 Enter the contact number and press CALL button Audio is automatically transferred to the car kit 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step e and f for the procedure when activating and recording for voice dialing iz Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the car kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the multi function button again to terminate the call REJECTING A CALL Press the multi function button twice to reject the incoming call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls only lie Press it clockwise to increase the volume 2 Decreases the volume by pressing it counter clockwise Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling sound echo or background noise during calls on some cell phones ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing Before voice dialing you must first turn on the name dialing function and re
29. ings YES Voice control YES 2 Voice settings YES Voice dialing YES Select On YES 3 Continue pressing NO to exit Using T68i Sony Ericsson 1 Go to the Menu Key by pressing the joystick Scroll to Settings YES Voice control YES Voice dialing YES 2 Select On YES 3 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below p Voice Voice Voice Settings control settings dialing On T68 5 8 1 1 1 T68i 5 6 1 1 RECORDING FOR VOICE DIALING Using T68 Sony Ericsson 1 Go to the Menu Key by pressing the joystick Scroll to Settings and press YES Choose Voice control YES Voice Commands YES Select a contact YES Add voice YES 2 Follow the instructions in the display An icon will appear next to a contact name which has a voice command 3 Continue pressing NO to exit Using T68i Sony Ericsson 1 Go to the Menu Key by pressing the joystick Scroll to Settings and press YES Choose Voice control YES then go to Voice dialing YES Edit name YES Add voice YES 2 Select a contact YES 3 Follow the instructions in the display An icon will appear next to a contact name which has a voice command 4 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Settings Voice control Voice commands Contacts T68 5 8 2 4 Settings Voice control Voice dialing Edit names T68i 5
30. o call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing Press quickly the multi function button twice to redial the last number REJECTING A CALL Press the multi function button twice to reject the incoming call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls or every time a key is pressed on your cell phone 1 Press it clockwise to increase the volume 2 Decrease the volume by pressing it counter clockwise As you press the button the volume level is simultaneously displayed on the cellular phone Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling sound echo or background noise during calls Note It is also possible to use the volume keys of the cellular phone to set the volume by pressing the multifunction button first RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 From standby mode press arrow up or down 2 Find a contact name to which you want to add a voice tag Press Details button The phone number will be displayed 3 Press Options button Add voice tag SELECT Press Start and say the nam
31. oice dialing Refer to step f for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the headset prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing Pressing quickly the multi function button twice triggers the cell phone to redial the last number Call is automatically transferred on the headset REJECTING THE CALL Press the multi function button twice to reject the incoming call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls only 1 Press it clockwise to increase the volume 2 Decrease the volume by pressing it counter clockwise Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling sound echo or background noise during calls Note It is also possible to use the volume keys of the cellular phone to set the volume As you press it the volume level is simultaneously displayed on the cellular phone RECORDING FOR VOICE DIALING Use your phone when recording for voice dialing Re
32. onn authorisation SELECT No SELECT 3 Continue pressing Back button to exit the Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Bluetooth View paired devices Select 6310 10 4 Options 6310i_ 11 4 Options ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the headset as well as on the phone 1 Press the multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio is still transferred to the headset MAKING A CALL with the headset on Normal dialing E Enter the contact number and send As you dial audio and the keypad tones can be heard on the headset simultaneously but not on the phone 12 2 Press the multi function button to hang up and terminate the call Note If the call is terminated using the cellular phone a tone will be heard on the headset indicating that the call has been terminated Voice dialing Refer to step g for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the headset prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps abov
33. ove may be repeated 17 4 Press the button again to terminate the call Redialing Press quickly the multi function button twice to redial the last number REJECTING A CALL Press the multi function button twice to reject the incoming call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls or every time a key is pressed on your cell phone 1 Press it clockwise to increase the volume 2 Decrease the volume by pressing it counter clockwise As you press the button the volume level is simultaneously displayed on the cellular phone Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling sound echo or background noise during calls Note It is also possible to use the volume keys of the cellular phone to set the volume RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 Press the Menu button Select Contacts OPTIONS Open SELECT 2 Find a contact name Press button The contact number is the one being displayed 3 Press Options button Scroll to Add Voice tag SELECT Instructions appear Your voice is automatically saved on the phone after being played back to you 4 In case you wish to change your recorded voice press Options button Voice tag SELECT Change SELECT Instructions appear 5 Contin
34. rd on the headset prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls only T Press it clockwise to increase the volume 2 Decreases the volume by pressing it counter clockwise 8 Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling sound echo or background noise during calls on some cell phones ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing Before voice dialing you must first turn on the name dialing function and record your voice To turn voice dialing on and record number types 1 Press the Menu Key Scroll to Settings YES Voice control YES 2 Voice settings YES Voice dialing YES Select On YES 3 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Settings Voice control Voice settings Voice dialing On T39m 4 9 1 1 1 RECORDING FOR VOICE DIALING 1 Press the Menu Key Scroll to Settings YES Voice control YES Voice Commands YES
35. rminate the call Voice dialing Refer to step f and g for the procedure when activating and recording for voice dialing 1 Press the multi function button once to activate the voice dialing Sound is automatically transferred to the headset 2 A beep will then be heard on the headset prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call SETTING THE VOLUME The headset has a digital volume control and is combined with the multi function button Setting the volume can be done during calls only 1 Press it clockwise to increase the volume 2 Decreases the volume by pressing it counter clockwise Continuous pressing of the digital volume control can rapidly set the volume If the volume is too high it can cause feedback whistling sound echo or background noise during calls on some cell phones ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing Before voice dialing you must first turn on the name dialing function and record your voice To turn voice dialing on 1 On the Applications window flip open mode tap Phone 2 Tap Edit then tap Preferences A list of features will appear 3 Tap Voice Control then tap the box aligned to Voice dialing to
36. set 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink This indicates that the headset is now ready for pairing 5 Press the Menu button Scroll to Bluetooth SELECT Scroll to Search for audio accessories SELECT The phone is now scanning for Bluetooth devices SELECT the headset The phone will initiate connection with the headset QUICK ACCESS for step 5 Press Menu followed by the sequence of numbers below Bluetooth Search for audio accessories 6310 10 2 6310i 11 2 6 Enter 0000 as the passcode then press OK The phone is now connected with the headset 7 Press Back then Exit to exit the Menu The headset is paired and ready to use An icon will be displayed during the standby mode indicating that the headset is linked with the phone Note Once paired the headset and the phone have simultaneous connection with each other keypad tones can be heard on the headset every time the keypad is pressed AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth headset 1 Press the Menu button Scroll to Bluetooth SELECT Scroll to View paired devices SELECT 2 Select the headset and press OPTIONS Scroll to Request c
37. t from the holster base 3 Turn off the headset 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink This indicates that the unit is now ready for pairing 10 5 Go the Menu Key by pressing the joystick Scroll to Connectivity SELECT Select Bluetooth SELECT 6 Scroll to My devices SELECT New device ADD The phone is now searching for pairable devices to be added Select the device you want to pair with your cell phone Press SELECT 7 Enter 0000 as the passkey then press OK If the pairing is successful the alternating red blue lights will stop 8 Continue pressing G5 to exit the menu key The unit is now ready to link calls from the phone directly to the car kit An icon will appear during the standby mode indicating that the car kit is linked with the phone ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the car kit 1 Just press the multi function button down once to answer the call Pressing the button again will hang up and terminate the call 2 If you wish to answer a call on the cellular phone just press YES and the call is automatically transferred to the phone Pressing the multi function button transfers the call on the car kit 3 To terminate the call press the multi function button again MAKING A CALL with the
38. ue pressing Exit key to exit the Menu Note Record your voice command in a quiet place so that only your voice will be recorded on the phone USING WITH SIEMENS S55 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press the Menu button Scroll to Setup SELECT Choose Connectivity SELECT 2 Scroll to Bluetooth Change The phone is now connecting with the Bluetooth device An icon will appear on the upper left corner when connected OPTIONS button may also be pressed Choose Activate BT then SELECT 3 Continue pressing the On Off End Key to exit the Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Doing this sequence once will either activate or deactivate the Bluetooth depending on your current setting Setup Connectivity Bluetooth 9 6 4 PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the headset 2 Detach the headset from the holster base 3 Turn off the headset 4 From the OFF state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the red and blue indicator will alternately blink This indicates that the headset is now ready for pairing 5 Press the Menu button Scroll to Setup SELECT Choose Connectivity SELECT Scroll to Bluetooth OPTIONS Scroll to Search for
39. und echo or background noise during calls Note It is also possible to use the volume keys of the cellular phone to set the volume by pressing the multifunction button first RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 From standby mode press arrow up or down 2 Find a contact name to which you want to add a voice tag Press Details button The phone number will be displayed 3 Press Options button Add voice tag SELECT Press Start and say the name clearly Voice tag saved is displayed indicating that the voice tag has been saved 4 In case you wish to change your recorded voice press Names Voice tags SELECT Scroll to the name whom you want to change the voice tag then press Options Change SELECT Follow the instructions 5 Continue pressing Back button to exit Note Noisy environment could affect voice recognition Record voice in a quiet environment USING WITH NOKIA 8910i ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices Ts Press Menu Scroll to Connectivity SELECT Bluetooth SELECT 2 Choose On SELECT An icon will appear on the display on the standby mode 3 Continue pressing Back button to exit the Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Connectivity Bluetooth Select On Select 89101 10 1 1 1 1 PA
Download Pdf Manuals
Related Search