SETTING UP the Sun StorEdgeTM 5310 NAS
Contents
1. module Port 2 connects to the next EU F right module Port 1 B4 B6 and so on X10 Units should be rack mounted from the bottom up starting with any EU F s then the RAID EU then the NAS For product documentation for the Sun StorEdge 5310 please go to Refer to the POWERUP instructions on the other side of this poster http www sun com products n solutions hardware docs Network_Storage_Solutions storage_appliances index html2. A cards R Connecting a Single EU F Expansion Enclosure The EU F expansion enclosure connects to the RAID EU controller tray through a pair of Active Copper cables Connect the RAID EU s left module expansion port to Port 1 on the left module of the EU F 3 Connect the RAID EU s right module expansion port to Port 2 on the right module of the EU F 4 If you are connecting multiple EU Fs please refer to callout B The RAID EU Tray Number is set to 0 Each EU F must be set to a different number Use the Tray Number thumb wheels to set the EU Fs to 1 for the first 2 for the second and so on From HBA Port 2 From HBA Port 1 RAID EU B J e v M e 7 o 0t0 0f0 OS o oto CTO Ao te Tt tts EU F E E E a p ower connector 1 powers module A TT P knn laaan EN ee a Power connector 2 powers module B EERE Eee _ Seer EU F nl Sl fae td a EU F Expansion Ports Connecting Multiple EU F Expansion Enclosures Each EU F Expansion Enclosure is connected through a pair of Active Copper cables Connect the RAID EU s left module right expansion port to Port 1 on the left module of the top EU F B1 Connect the RAID EU s right module right expansion port to Port 2 on the right module of the bottom EU F B2 Conflict KE sg a onan i et ar Each EU F connects to the EU F below it the left module Port 2 connects to the next EU F left module Port 1 B3 B5 and so on The right
3. S RY SUN microsystems SETTING UP the Sun StorEdge 5310 NAS CONTENTS Power Sun StorEdge 5310 NAS Front view Front ears Front Bezel Warning The X5030A slide rail kit is required to safely mount this unit The kit is sold separately Set up poster Detailed installation instructions are included with the kit Using a kit other than the X5030A could create a safety hazard or damage the system or cabinet The front ears hold the bezel Do not use them for rack mounting amp Rear view BBEBBBEEEE pte Serial UPS Control A7_ R45 NIC 1 RJ45 NIC 2 S Re SUN FRONT PANEL Hard Drive Status LED System Status LED Power LED System ID LED NIC 1 LED NIC 2 LED System ID Power Button L Button Reset Button NMI Not Used LEDs and Pushbuttons LCD Panel Controls Power connector 1 powers module A Power connector 2 powers module B POWERUP Follow storage installation instructions on the other side of this poster before powering up the system NOTE Always power on the units in the following order 1 If present expansion enclosure s first 2 RAID EU controller tray next 3 Sun StorEdge 5310 NAS last 1 Power on the EU F expansion enclosure s if present power switches and allow the hard drives to spin up for a minute If you do not have any EU F expansion enclosure s skip to the next step 2 Power on the RAID EU controller tray powe
4. es de fabrique ou des marques d pos es de Sun Microsystems Inc aux Etats Unis et dans d autres pays Toutes les marques SPARC sont utilis es sous licence et sont des marques de fabrique ou des marques d pos es de SPARC International Inc aux Etats Unis et dans d autres pays 819 1168 11 Revision A y g g q a q P y pay q a q q p pay Date 12 2004 Attaching the Sun StorEdge 5310 NAS 5300 RAID EU and 5300 EU F Before you can use the Sun StorEdge 5310 NAS you must attach it to the RAID EU and the EU Fs if present Connecting the 5310 NAS to a 5300 RAID EU Controller Tray The 5310 NAS and one 5300 RAID EU connect through a pair of Optical Fiber cables Connect the HBA port 2 on the server to the left Caution Connect all cables before powering up the systems module Host 1 port on the RAID EU 1 Connect the HBA port on the server to right module Host 1 port on the RAID EU 2 e When you power off the RAID EU or EU F wait ten seconds before you power it Bacon _ lf you have two HBA cards refer to callout A Connect the first HBA port 2 A1 to the left module Host 1 port on the RAID EU Connect e Always power up the systems in the order described on the front of this poster under POWERUP the second HBA port 2 A2 to the right module Host 1 port on the RAID EU If you are connecting two 5300 RAID EUs please refer to the Sun StorEdge 5310 NAS Hardware Installation Configuration and User Guide Wiring for two HB
5. r switches 3 Turn on the Sun StorEdge 5310 NAS by pressing its power switch If the IP address is automatically configured using DHCP skip Network Setup without DHCP and go to System Configuration NETWORK SETUP without DHCP If your network does not support DHCP follow these steps to manually configure the IP address using the LCD Panel Controls 1 After the system has booted up press the Select button once then select Set Static IP 2 Enter or accept the values listed below then using the Select button move the cursor to the far right to save them IP Address Subnet mask Broadcast Address Gateway Address if necessary SYSTEM CONFIGURATION Using a separate system with a Java enabled browser connected to the network 1 Make sure the network link LED is green 2 Enter the IP address of the Sun StorEdge 5310 NAS NOTE You must use a Java enabled browser If not already installed the Configuration Wizard prompts you to allow your browser to install the Java plug in from the Internet Click Yes After installing the Java plug in it takes about 45 seconds for the Login page to load Check browser settings to confirm that no proxy server is enabled or that it is bypassed for local network addresses 3 Click Apply to log in no passwords are required at this point The system displays the End User agreement 4 Click Accept Agreement to continue The system prompts you to start the Configuration Wiza
6. rd 5 Click Next to start the Configuration Wizard 6 Follow the steps in the Configuration Wizard to complete the system setup Copyright 2004 Sun Microsystems Inc All rights reserved Use is subject to license terms Third party software including font technology is copyrighted and licensed from Sun suppliers Portions may be derived from Berkeley BSD systems licensed from U of CA Sun Sun Microsystems the Sun logo Sun StorEdge Java and Solaris are trademarks or registered trademarks of Sun Microsystems Inc in the U S and in other countries All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International Inc in the U S and in other countries U S Government Rights Commercial use Government users are subject to the Sun Microsystems Inc standard license agreement and applicable provisions of the FAR and its supplements microsystems Copyright 2004 Sun Microsystems Inc Tous droits r serv s Distribu par des licences qui en restreignent l utilisation Le logiciel d tenu par des tiers et qui comprend la technologie relative aux polices de caract res est prot g par un copyright et licenci par des fournisseurs de Sun Des parties de ce produit pourront tre d riv es des syst mes Berkeley BSD licenci s par l Universit de Californie Sun P i ce p j i T F i ARN buai Capre Sun Microsystems le logo Sun Sun StorEdge Java et Solaris sont des marqu
Download Pdf Manuals
Related Search