Crafty vaporizer instructions manual
Contents
1. The LED display of Battery temperature is either too high or too low Allow the hot Vaporizer to cool down or the cold Vaporizer to warm up Battery is completely discharged Please connect the charger The power adapter or the USB cable is not suitable CRAFTY flashes alternately Please use an original Storz amp Bickel power adapter and red green USB cable or car adapter The LED display of The Vaporizer is faulty In this case disconnect from the CRAFTY flashes alternately red orange mains without delay and get in touch immediately with our Service Center If the preceding tips do not yield the desired results or for any other defects or problems not mentioned here please unplug the power adapter and contact our Ser vice Center immediately Do not open the Vaporizer or the power adapter Without special tools and specialized knowledge any attempt to open either of these devices will cause damage to them Such an attempt will invalidate the warranty claim Do not try to remedy the defect your self Contact our Service Center di rectly Disposal If the Vaporizer or the power adapter is irreparably damaged please do not simply throw them away As they are made of high quality completely recy clable component parts they should be brought to a material recycling center in your town or sent to our Ser vice Center for disposal 7 COMMISSIONING AND OPERATION Do not leave the de2. ly ignite Sets of new Cooling Units may be ordered from www storz bickel com 10 3 Removal of the lower Filling Chamber Screen Remove the lower Filling Chamber Screen out of the Filling Chamber by using a pair of tweezers or a pair of pointed pliers Insert a new Screen while taking care that the edges of the Screen lock in place into the groove provided 11 CRAFTY APP General The CRAFTY App is not necessary for operating the CRAFTY Vaporizer does however allow individual set tings to be made and allows the read out of additional information when the CRAFTY Vaporizer is in operation As the CRAFTY Vaporizer has too little space for a display the Vaporizer can be connected to an iPhone or Android smartphone via Bluetooth and the smartphone s display used Minimum requirement for this is iOS6 for the iPhone or Android 4 3 The CRAFTY App can be downloaded from the App Store or Google Play Store 11 1 Default settings Basic temperature 180 C 356 F Booster temperature additional so corresponding to LED indicator brightness CRAFTY 100 Charge indicator lamp CRAFTY ON 15 C 59 F 195 C 383 F Vibration CRAFTY ON Vibration smartphone OFF Smartphone alarm tone OFF 11 2 Connecting the CRAFTY Va porizer with a smartphone Switch on the smartphone and down load the CRAFTY App Ensure that the Bluetooth function is switched on and this is not blocked by another Bluetooth dev
3. the charge indicator lamp flashes and shows the current level of charging TEE Charge indicator lamp 29 11 5 Further individual settings uil CARRIER a A www storz bickel com LED brightness Crafty Charge indicator lamp Crafty CSM Vibration Crafty Crafty serial mer CY 247988 Vibration smartphone Smartphone alarm tone LE ure B Settings LED brightness CRAFTY The brightness of the LED indica tor on the CRAFTY Vaporizer can be dimmed using the slider control Charge indicator lamp CRAFTY Here the blue lights of the LED indi cator can be switched on and off dur ing the charging operation When the power adapter is plugged in to start the 11 CRAFTY APP charging the LED indication lights up for a moment on red green blue and the Vaporizer vibrates briefly This serves as a functional check and indi cates that the charging operation has started Vibration CRAFTY The vibration motor of the CRAFTY Vaporizer can be switched on and off here Reset to default settings The default settings see Section 11 1 Default settings can be restored here The following settings values are re stored to the default settings Set temperature Booster temperature LED brightness Charge indicator lamp Vibration CRAFTY Vibration smartphone Smartphone alarm tone Connect to other CRAFTY If another CRAFTY Vaporizer is to be controlled by the sam
4. Filling Chamber cap from above by using the Filling Chamber Tool supplied Pressing out the upper Screen Reassemble in reverse order When assembling make sure that Seal Rings are properly seated The Mouthpiece Seal Ring especially must sit completely in the cap and be no longer visible The upper Screen must be inserted carefully into the groove provided Disregarding this may allow plant particles to enter the Cooling Unit so blocking this or be inhaled 10 DISASSEMBLING CLEANING AND ASSEMBLING 10 2 Cleaning the CRAFTY Cooling Unit The Cooling Unit can be disassem bled for cleaning purposes and then assembled again see Section 10 1 Disassembling and reassembling the CRAFTY Cooling Unit The Cleaning Brush cotton swabs and paper or cotton towels may be used for cleaning As solvent we recommend alcohol ethanol or warm water with wash up liquid Manual cleaning of the disassembled Cooling Unit Do not immerse any plastic components for longer than an hour in alcohol or ethanol Extended contact with alcohol or etha nol can lead to discoloration or embrit tlement of plastic parts Before assembling allow all compo nent parts to dry properly After cleaning check all component parts for surface damage tears sof tening or hardening impurities distor tion and discoloration and set dam aged component parts aside Warning Alcohol ethanol A is flammable and may easi
5. Service Center Incorrectly performed repairs without the use of original spare parts can prove dangerous to the user Danger to life when opening the power adapter as live components and connections are exposed gt The Vaporizer must never be repaired or transported when the power adapter is plugged in The Vaporizer and power adapter must never be operated when the power adapter USB cable is faulty Do not put any objects into the openings of the device Do not leave the Vaporizer unat tended while it is being operated After use switch off the heater The ventilation slots and the hot air outlet of the Vaporizer may not be closed obstructed or blocked while the device is being used nor while it is cooling down A Caution Hot surfaces gt gt gt The Filling Chamber is made of metal do not touch it when it is hot Before cleaning disconnect the power adapter from the socket The Vaporizer and the power adapter should be cleaned only with a dry cloth or a damp cloth if absolutely necessary Never immerse the Va porizer or the power adapter in water or any other liquid nor clean it with direct jets of water or steam The Vaporizer and the power adapter must not be used in damp or wet conditions Do not expose the Vaporizer or the power adapter to rain Do not use in the bathroom or above water o 2 SAFETY RECOMMENDATIONS Never touch the Vaporizer or power The manu
6. Setting temperature with the CRAFTY App 28 11 5 Further individual Settings 29 11 6 Menu items for device and information 30 12 Technical specifications cece eens eee eeeeeeteennenaees 13 CE Declaration of conformity a 14 Warranty Liability Repair service eee 32 1 PRODUCT OVERVIEW CRAFTY VAPORIZER Scope of delivery A oft _ Instructions Power Adapter with USB Cable CRAFTY Vaporizer 1 Set of Spare Seal Rings Herb Mill ee Cleaning Brush Filling Aid 3 pcs Spare Screens Liquid Pad optional accessory car adapter Please check whether all components have been included If not please inform the Storz amp Bickel Service Center In the case of technical problems questions about the device repairs warranty claims and disposal of the device customers in the US and Canada should contact the following address Storz amp Bickel America Inc 1078 60th Street Suite A Oakland CA 94608 Phone 510 451 1553 Fax 510 451 2053 email service america storz bickel com All other customers should contact this address Storz amp Bickel GmbH amp Co KG Rote Strasse 1 78532 Tuttlingen Germany Phone 49 7461 969707 0 Fax 49 7461 969707 7 email service storz bickel com 1 PRODUCT OVERVIEW CRAFTY VAPORIZER CRAFTY Vaporizer functional elements Filli
7. can only be replaced by Storz amp Bickel when the CRAFTY Va porizer is sent in to them Any attempt by the customer to re place the battery by him herself is potentially dangerous and leads to loss of any claims under the warranty and exempts Storz amp Bickel from any liability Mains operation The CRAFTY Vaporizer cannot be be operated with the power adapter or car adapter if the battery is completely discharged The battery must be first at least partially charged Proceed as described in 7 1 Charging the battery and then connect up the Vaporizer Automatic switching off The automatic switching off is used to save battery capacity so that the Vaporizer can be used as long as pos sible without charging The device switches off automatically one minute after the last press of a but ton or the last application The switch ing off of the Vaporizer is indicated by a short vibration and by displaying the charged state A short press of the ON OFF switch during operation can reset the automatic switching off to one minute 7 COMMISSIONING AND OPERATION 7 2 Heating up The CRAFTY Vaporizer provides two temperature levels that are set in the factory The basic temperature at 180 C 356 F and the booster tem perature at 195 C 383 F Both the basic and booster temperatures can be altered using a smartphone and the CRAFTY App see Section 11 4 Set ting temperature with the CRAFTY
8. changes Manufacturer Storz amp Bickel GmbH amp Co KG Rote Str 1 78532 Tuttlingen Germany 13 CE DECLARATION OF CONFORMITY The devices comply with the following EC Directives DIN EN 60 335 DIN EN 60 950 Electromagnetic Compatibility 2004 108 EG 14 WARRANTY LIABILITY REPAIR SERVICE Manufacturer s representations and warranties These representations and warranties are applicable to all end customers the Customers and each individu ally a Customer purchasing prod ucts the Products sold by Storz amp Bickel GmbH amp Co KG or Storz amp Bickel America Inc the Company Warranty and limitations Company warrants solely to the origi nal purchaser of the Products that for the warranty period as defined below the Products will be free from defects in materials and workmanship under normal use and will conform to Company s published specifications of the Products Notwithstanding the foregoing Company retains its right to deviate from its published specifica tions due to the latest innovations and improvements in function and design of the Products The foregoing war ranty is subject to the proper storage transportation and use of the Prod ucts and does not include defects due to normal wear and tear or deteriora tion including but not limited to de fects in batteries Screens and similar parts subject to wear and tear Upon delivery Custome
9. 4 F and 410 F see Section 4 Overview of plants all CARRIER a OV www storz bickel com Minus temperature button Charge indicator lamp Actual temperature Plus temperature button Set temperature Booster temperature Booster temperature display Functional elements Menu item Temperature When you press the plus button the set value is increased and when you press the minus button the set value is decreased When you briefly tap on the plus or minus button the set values are increased or decreased respectively in 1 degree increments If you keep the plus or minus button 28 pressed the set values start running continuously in the corresponding di rection The current actual temperature can be read from the upper line of the display The booster temperature is always added to the basic temperature But the total cannot exceed 210 C 410 F Fahrenheit Celsius If you simultaneously tap on the plus button and the minus button the dis play changes from degree Celsius to degree Fahrenheit and vice versa Charge indicator lamp The charge indicator lamp shows a battery symbol with six fields indicat ing the charging status If the battery is almost discharged the battery frame to flash if fully charged the frame and all six fields are visible The number of status fields visible depends on the extent of the battery charge During the charging of the CRAFTY Vaporizer
10. App Switch on the device heating up the Vaporizer with full Filling Chamber and Cooling Unit mounted is recom mended To do this press the orange ON OFF switch for at least one sec ond The Vaporizer responds with a short vibration The vibration does not take place if there is a fault The LED display indicates the heating operation up to the basic tempera ture by a steady red light Heating up the heat exchanger can take up to two minutes depending on the tem perature setting and battery charge level Once the basic temperature is reached this is signaled by a short double vibration and a steady green light If the basic temperature can no longer provide adequate evaporation the booster temperature can be activated by means of a double click on the orange colored ON OFF switch The LED displays the heating up opera tion for the booster temperature by a red flashing signal Once the booster temperature is reached this is sig naled by a short double vibration and a green flashing signal 7 3 Temperature setting The levels for the basic and booster temperatures can be altered with the aid of a smartphone and the CRAFTY App See Section 11 CRAFTY App 7 4 Reset to default settings It is possible to reset settings see Section 11 1 Default settings which were changed using the CRAFTY App The reset is made by pressing the ON OFF button for ten seconds while the CRAFTY Vaporizer is switched
11. Filling Chamber Fill the Filling Aid to the lower rim see drawing to the right The lower rim of the Filling Aid must be above the top level of the plant material Overfilling leads to clogging of the Screens and can make inhaling more difficult Filling the Filling Chamber with the Filling Aid The lower rim of the Filling Aid must be above the top level of the plant material Then re insert the plug into the central opening and screw on the upper cap of the Filling Aid Unscrew the Filling Aid with a 90 rotation and screw on the lower cap again Then re mount the Cooling Unit by rotating it clockwise through 90 9 APPLICATION Mount the Cooling Unit on the Vaporiz er and heat up This ensures that both the Filling Chamber and the material to be vaporized are preheated and the vaporizing can begin as soon as the heating process is completed Caution Hot surface After using the CRAFTY Va porizer do not touch any com ponents of the Filling Chamber until they have cooled down again Once the Vaporizer has reached the set temperature steady green light for the basic temperature and flash ing green for the booster temperature each also accompanied by a short double vibration and the Mouthpiece is folded out then the inhaling process may begin Using the CRAFTY Vaporizer Take the Mouthpiece between the lips and inhale slowly and evenly for sev eral seconds Please note the foll
12. RANTY LIABILITY REPAIR SERVICE All requests and notices from U S and Canadian Customers under this warranty shall be directed to Storz amp Bickel America Inc 1078 60th Street Suite A Oakland CA 94608 Phone 510 451 1553 Fax 510 451 2053 email service america storz bickel com All requests and notices from all other Customers under this warranty shall be directed to Storz amp Bickel GmbH amp Co KG Rote Strasse 1 78532 Tuttlingen Germany Phone 49 7461 969707 0 Fax 49 7461 969707 7 email service storz bickel com The warranty set forth in section Warranty and limitations is made in lieu of all other warranties whether express or implied rights or condi tions and Customer acknowledges that except for such limited warranty the Products are provided as is Company specifically disclaims with out limitation all other warranties ex press or implied of any kind including without limitation the implied warran ties of merchantability and fitness fora particular purpose non infringement and those warranties arising from a course of performance a course of dealing or trade usage Liability Handling of these Products is to be as stated in the Instructions for Use The user accepts full liability for improper handling and usage of these Products The intended application only refers to the plants named by us Repair of these Products is only to be done by us or one of ou
13. STORZ amp BICKEL GMBH amp CO KG sn il si n x N i in li lt INSTRUCTIONS FOR USE Read carefully before using the device and save these instructions INSTRUCTIONS FOR USE ENGLISH Table of contents page 1 Product overview Scope of delivery 4 2 Safety recommendations Explanation of symbols 6 3 Intended use 4 Overview of plants 5 Factors influencing vaporization 12 6 The CRAFTY Vaporizer i 12 7 Commissioning and operation iii 15 71 Charging the battery i 15 Pigi Heating UP s isao a eaea i niaaa 17 7 3 Temperature setting 17 7 4 Reset to default settings 0 0 0 0 cece eeeeeen eens 17 8 Filling the Filling Chamber cence eeeeeeeeceeeeeeeeneeeee 18 8 1 Filling Aid 8 2 Filling the Filling 9 Application 10 Disassembling cleaning and assembling 22 10 1 Disassembling and reassembling the CRAFTY Cooling Unit iii 23 10 2 Cleaning the CRAFTY Cooling Unit 25 10 3 Removal of the lower Filling Chamber Screen ws 25 ill CRAFTY ADP Lilia 26 11 14 Default settings 26 11 2 Connecting the CRAFTY Vaporizer with a smartphone 26 11 3 The menu items of the CRAFTY App 27 11 4
14. bove are intended to apply to the maximum extent permitted by ap plicable law Customer may also have other rights that vary by state country or other jurisdiction The information contained in these Instructions for Use are based on our experience and is current and com plete to the best of our knowledge and ability at the time of printing Storz amp Bickel GmbH amp Co KG does not ac cept responsibility for errors omis sions or incorrect interpretations of the contents or any information herein Users are advised that all applications and uses of the Products described must conform to applicable local laws ordinances and codes and users of the Products are advised that they are solely responsible for determining and assuring the suitability of any Product for the intended application Repair service After the warranty period has expired or if there are any defects which are not covered under warranty our ser vice department will repair the defect after providing the Customer with an estimate and receiving the payment Copyright No part of this document may be repro duced in any form by printing photo copying or other means or processed duplicated or circulated electronically without the prior written approval of Storz amp Bickel GmbH amp Co KG www storz bickel com STORZ amp BICKEL GMBH amp CO KG Rote Strasse 1 78532 Tuttlingen Germany Tel 49 74 61 96 97 07 0 Fax 49 74 61 96 97 07 7
15. e smartphone the previous connection can be dis connected so that the serial number of the other CRAFTY Vaporizer can be entered Vibration smartphone Here in addition to the vibration of the CRAFTY Vaporizer the vibration of the smartphone can also be switched on and off here Smartphone alarm tone Any alarm tone of the smartphone can also be switched on and off here in parallel with the vibration of the CRAFTY Vaporizer 11 6 Menu items for device and in formation Device Here you find device related informa tion such as operating hours soft ware versions etc Information Here you find further information such as lists of plants and prices but also di rect links to the Storz amp Bickel website or to the online shop 12 TECHNICAL SPECIFICATIONS Power adapter Power consumption 10 W Supply voltage 100 240 V 50 60 Hz Output voltage 5V DC CRAFTY Vaporizer Supply voltage 5V DC The voltage details are located on the respective type labels of the CRAFTY Vaporizer and power adapter Power required by CRAFTY Vaporizer 10 W max Operating temperature 5 C 40 C 41 F 104 F Vaporization temperature adjustable between approx 40 C 210 C 104 F 410 F Dimensions 11 0 x 5 7 x 3 3 cm 4 3 x 2 2 x 1 3 inch Weight approx 135 g 0 3 Ibs Please unplug the power adapter from the mains socket to completely disconnect from the mains power supply Subject to technical
16. eMail info storz bickel com STORZ amp BICKEL AMERICA INC 1078 60th St Suite A Oakland CA 94608 phone 510 451 1553 fax 510 451 2053 email america storz bickel com CE by STORZ amp BICKEL GmbH amp Co KG CAL 30 202 12 2014 sec_EN Subject to alterations All rights reserved
17. ed Cleaning Brush The upper Screen especially can become clogged with plant material and so make inhaling difficult In this case remove the Screen as in Sec tion 10 Disassembling cleaning and assembling and clean or insert a new Screen Then re mount the Cooling Unit by ro tating it clockwise through 90 8 1 Filling Aid The Filling Aid supplied with the unit makes filling the Filling Chamber an easy and clean operation and serves as a magazine for transporting and storing plant material already ground in the Herb Mill BQ ween eter g Upper KEES A Cap Plug Bowl Lower Cap To fill the Filling Aid remove the up per cap and fill the bowl incl plug with ground plant material Replace the up per cap and close it Filled Filling Aid upper cap removed 8 FILLING THE FILLING CHAMBER 8 2 Filling the Filling Chamber using the Filling Aid Remove the Cooling Unit from the Va porizer and remove any residues that may be in the Filling Chamber The Filling Chamber Tool can be a help in doing this Remove the lower cap of the Filling Aid by turning counterclockwise Place the Filling Aid on the Vaporizer and attach by turning it clockwise Remove the upper cap from the Filling Aid Pull the plug and use it to fill a portion of plant material through the central opening into the Filling Chamber Make sure that the Filling Chamber is not overfilled see Section 8 Filling the
18. facturer is not re adapter with wet or damp parts of the sponsible for any damage body or personal injury caused gt Never operate the Vaporizer or by inappropriate incorrect or irre power adapter when it is wet or sponsible use damp If the Vaporizer or the power adapter gets wet it must be checked by our Service Center for damage to electrical components Do not use in an atmosphere with risk of explosion or ignition Never allow the Vaporizer or the power adapter to be used by children or unqualified persons Only use original Storz amp Bickel ac cessories and spare parts 3 INTENDED USE The CRAFTY Vaporizer releases fra grances or aromas from the herbs and other plant materials listed below These aromatic substances are re leasedthrough vaporizationby heated air and may be directly inhaled The device may only be used with the recommended vaporizing media The use of other substances can present a health risk The CRAFTY Vaporizer is not intend ed for medical therapeutic purposes 4 OVERVIEW OF PLANTS Below is an overview of the plants that are suitable for vaporization in the CRAFTY Vaporizer The aromas and fragrances from the plant materials listed below may be vaporized Plant name Botanical name Eucalyptus Hops Chamomile Lavender Lemon balm Sage Thyme Eucalyptus globulus Humulus lupulus Matriarca chamomilla Melissa officinalis Salvia officinalis Thymus vulga
19. first time The charging time for the battery de pends on how old it is and how high the charge is on starting it takes about two hours if the battery is com pletely discharged Connect the USB cable to the charg ing socket of the Vaporizer and to the power adapter Then plug the power adapter into a suitable power socket Note When the power adapter is plugged into the mains the LED dis play lights up in green red blue for a moment and the Vaporizer vibrates briefly This serves as a functional check and indicates that the charging operation has started The LED lights up and starts to flash i e the battery is being charged As soon as the battery is fully charged the charge indicator lamp stops flash ing and shows a steady blue light Once the charging operation is com plete first disconnect the power adapter from the mains socket and then unplug from the Vaporizer 7 COMMISSIONING AND OPERATION The battery can also be charged via the optional car adapter Connect the car adapter to the power socket of the Va porizer using the USB cable and then plug the car adapter into the socket in the car for the cigarette lighter or any other suitable 12 V socket Charge and complete the operation in the same way as with the power adapter see Section 7 1 Charging the bat tery Connecting the Vaporizer using the power adapter or car adapter Batteries are specially as sembled consumable items that
20. from the box Immediately after unpacking check whether the Vaporizer the accessories the power adapter and the device plug are all in cluded in the delivery and work prop erly If you notice any defects inform the seller or the delivery agent imme diately The packing material plastic bags boxes etc must be kept out of the reach of chil dren as it is a potential source of dan ger Please dispose of the packing mate rial in a proper and environmentally friendly manner We recommend keeping the original packaging in case it is required later transport Storz amp Bickel Service Center etc 6 THE CRAFTY VAPORIZER Power connection Before connecting up the Vaporizer make sure that the information given on the power adapter type label cor responds to the local power supply voltage All parts of the electrical system must comply with currently applicable offi cial regulations Place the heated Vaporizer only ona hard stable surface and not on any soft or heat sensitive material Take care that the power adapter USB cable cannot be damaged through kinking crushing or pulling Improper installation may lead to personal injury or ma terial damages for which the manufacturer cannot be held respon sible Application and operation This Vaporizer was developed for vaporizing the plant mate rials listed in the plant over view Any other use is inappropriate and potentially dangerous T
21. grances released can be influenced by the fol lowing factors 1 Quality The amount of aroma or fragrance contained in the respec tive plant material that can be va porized 2 Quantity The amount of vaporiza tion material in the Filling Cham ber 3 Surface The finer the plant is ground the greater the surface and the more aromas and fra grances can be released during the vaporization cycle 4 Temperature The higher the tem peratures the more aromas and fragrances will be released at once Please note Increasing the tempera ture should be the last resort because plant material tastes more roasted when using higher temperature Since the plant ingredients are re leased in a gentle manner the vapori zation cycle may be repeated with the same contents in the Filling Chamber Depending on the four factors de scribed above the Filling Chamber contents may be reused multiple times until the aromas and fragrances are released completely If no more vapor is produced at the highest temperature then the vapori zation material is completely exhaust ed and must be replaced with new material However for the best aroma results it is advisable to replace the vaporization material before this point 6 THE CRAFTY VAPORIZER Unpacking The box contains all components as well as the Instructions for Use Keep the Instructions for Use for future ref erence Remove the Vaporizer and the ac cessories
22. he user should always follow the instructions listed here for use and maintenance If you have any concerns or if there are any problems immediately switch off the Vaporizer and pull the power adapter cord if used from the sock et Do not try to remedy the defect yourself Contact our Service Center directly After using the Vaporizer and power adapter allow them to cool down be fore placing them in storage Storage Store the Vaporizer and the power adapter in a dry place protected against the effects of weather and out of the reach of children or unqualified persons In case of problems If the power adapter has been in use unplug it at the socket and ensure that no one can connect the Vaporizer to the mains supply again without this being noticed Before any maintenance work is done the Vaporizer has to be switched off and the power adapter unplugged from the power supply Put the Vaporizer in the original pack aging or pack it properly in other pack ing material and send it to our Service Center 6 THE CRAFTY VAPORIZER Possible faults Troubleshooting Problem Possible cause remedy CRAFTY cannot be Please ensure that the CRAFTY s battery is charged switched on If the Vaporizer still does not work then the device is faulty In this case get in touch immediately with our Service Center The LED display of CRAFTY flashes alternately red blue The LED display of CRAFTY flashes blue
23. ice Then switch on the CRAFTY Vaporizer and after that the CRAFTY App You will now be requested to enter the serial number of your CRAFTY Vaporizer Enter the 6 digit number of the type label on the underside of the device It is sufficient to enter the serial num ber once Calling the CRAFTY App au tomatically connects the two devices If another CRAFTY Vaporizer is to be controlled by the same smartphone the previous connection is to be dis connected by use of the Connect to other CRAFTY button and the serial number of the other CRAFTY Vapor izer entered ull CARRIER Connecting Ch Enter the serial number found he bottom of your fty type label sv CE Making the connection 27 11 3 The menu items of the CRAFTY App Temperature Settings Device Information Temperature Here you can read off the set and ac tual temperatures and carry out the temperature settings You will also find here the charge indicator lamp of the CRAFTY Vaporizer Settings You can also make further individual settings here Device Here you find the device related infor mation such as operating hours soft ware versions etc Information Here you find further information such as lists of plants and prices but also di rect links to the Storz amp Bickel website or to the online shop 11 4 Setting temperature with the CRAFTY App The temperature can be set between 40 C and 210 C 10
24. n battery that must be discharged before disposal EU conformity symbol C The manufacturer confirms with this symbol the compliance of the product with the applicable European directives and standards o 2 SAFETY RECOMMENDATIONS Nationally Recognized Testing Laboratory additional requirements of UL 499 and CAN CSA C22 2 No 64 have been tested on the basis of EN 60335 1 Safety tested and production monitored by TUEV SUED Germany Caution Hot surfaces Do not touch metal parts Keep away from sunlight Protect against moisture and humidity DC direct current The following symbols relate to the power adapter O A A LISTED RoHS FE Safety Category II device UL Recognized Component Mark This symbol indicates that the corresponding devices are listed by UL UL Underwriters Laboratories This symbol indicates that the corresponding devices are listed by UL Restriction on the use of certain hazardous substances in electrical and electronic equipment Efficiency Level 5 Efficiency of power adapter Symbol for FCC declaration of conformity electromagnetic interference approval in the USA FX 7 2 SAFETY RECOMMENDATIONS Equipment with this symbol may only be used in the house dry surroundings that applies in China Safety recommendations The packaging material plastic bags boxes etc must be kept out of the reach of children as itis a potential source
25. ng Chamber Cooling Unit Filling Chamber Tool ZO Charging Socket behind the Filling Chamber Tool ON OFF Switch LED Display Type Label on the underside 2 SAFETY RECOMMENDATIONS Read the following safety important to ensure safety during recommendations thor installation use and maintenance oughly and carefully before of the Vaporizer and power adapter using the device Please keep this brochure in a safe These Instructions for Use are a place for future reference significant part of the Vaporizer You may download the current In and power adapter and must be structions for Use for the CRAFTY provided to the user on www storz bickel com The instructions given in these In structions for Use must be strictly observed as they are extremely Explanation of symbols Please follow these instructions carefully Safety recommendations In order to avoid injuries to persons and damage to the equipment it is mandatory to observe instructions marked with this symbol Note Tip This symbol always gives you technical information or useful tips regarding the Vaporizer Symbol for the manufacturer the manufacturer s name and address are next to the symbol The device was introduced after 13 August 2005 It may not be disposed of in normal household waste The X on the trash can indicates the necessity of disposing of this device separately The device contains a built in rechargeable lithium io
26. of danger People who require assistance must be supervised constantly during ap plictaion Such persons often under estimate the hazards involved e g strangulation with the USB cable of the power adapter so resulting in injury The device contains small parts which can block the respiratory tract and lead to choking Therefore make sure that you always keep the Vaporizer and accessories out of the reach of babies and infants When charging the battery only use the power adapter supplied with the Vaporizer or the car adapter avail able as an accessory from Storz amp Bickel The use of products from other sources can damage the bat tery The lightning flash with arrowhead symbol within an equilateral triangle alerts the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electrical shock The China Compulsory Certificate CCC is a certification system If you have any concerns ask a specialist to check whether the electrical system is in accordance with the local safety regulations If there are any problems during operation immediately pull out the power adapter from the socket The USB cable of the power adapter must be unwound over its entire length avoid rolling up and laying the coils over each other It must not be exposed to any impacts and must be kept out of the reach of children Also it mus
27. on If the ON OFF button has been pressed for ten seconds the signaling of the reset is made by the following running lights sequence red green blue red green blue red green blue The CRAFTY Vaporizer also vibrates while the lights sequence is running 8 FILLING THE FILLING CHAMBER Turn the Cooling Unit with a 90 rota tion counterclockwise in order to re move it from the Vaporizer Removal of Cooling Unit with Mouthpiece Always fill the Filling Chamber com pletely up to the plastic rim with ground plant material Do not compress the plant material too much so that the airflow is not unnecessarily impeded Remove any excess plant material left around the filling aperture so that it is clean and allows the Cooling Unit to be fitted If the Filling Chamber is only partially filled then the vapori zation material may shift around the hot air then bypasses the vaporization material so that no va porization can occur Filling Chamber properly filled If the Filling Chamber is not to be filled completely it is recommended to place the included Liquid Pad over the herbs and then mount the Cooling Unit on the Vaporizer Filling Chamber partially filled with Liquid Pad placed on top 8 FILLING THE FILLING CHAMBER Take care that the Screens are not obstructed with plant material To guarantee opti mal results we recommend cleaning the Screens after each vaporization cycle with the enclos
28. owing about vapor generation the more intense the va pors the greater the impairment of the flavor A very high intensity or den sity of the vapor can lead to irritation of the respiratory passages from the concentration of the aromas and fragrances In this case the temperature should be lowered so that the intensity of the vapors is reduced see Section 11 4 Setting temperature with the CRAFTY App Inhale only half the amount of air you can normally manage Hold your breath for a few sec onds and exhale slowly It is advisable to deliberately concentrate on your breathing process After vaporization turn off the CRAFTY Vaporizer To do this press the orange ON OFF switch for at least one second The Vaporizer acknowl edges the switching off with a short vibration Allow the Vaporizer to cool down be fore it is packed away 10 DISASSEMBLING CLEANING AND ASSEMBLING When the vapors are cooled it is in evitable that a small fraction is con densed on the internal surfaces of the Cooling Unit The component parts of the Cooling Unit including the Mouthpiece must be thoroughly cleaned on a regular basis to guarantee proper operation and pure flavor For hygienic reasons it is also neces sary to clean these components when the Vaporizer is to be used by a differ ent person The condensate can be sticky The Cooling Unit can be dismantled more easily when it first warmed up Produc
29. r authorized cus tomer services Only original Storz amp Bickel parts are to be used Failure to comply with any of the points mentioned in these Instructions for Use release Storz amp Bickel GmbH amp Co KG from any and all liability 14 WARRANTY LIABILITY REPAIR SERVICE Limitation of liability In no event shall Company be liable for any indirect incidental punitive special or consequential damages including but not limited to damages for loss of profits revenue goodwill or use incurred by Customer or any third party whether in an action in contract tort strict liability or imposed by stat ute or otherwise even if advised of the possibility of such damages Company s liability for damages aris ing out of or in connection with this agreement shall in no event exceed the purchase price of the Products It is agreed and acknowledged that the provisions of this agreement allocate the risks between Company and Cus tomer that Company s pricing reflects this allocation of risk and but for this allocation and limitation of liability Company would not have entered into this agreement In jurisdictions that limit the scope of or preclude limitations or exclusion of remedies or damages or of liability such as liability for gross negligence or willful misconduct or do not allow implied warranties to be excluded the limitation or exclusion of warran ties remedies damages or liability set forth a
30. r shall imme diately inspect the Products for con formity and visible defects Customer shall give Company immediate written notice of any non conformities or vis ible defects regarding the Products and contact Company in writing con cerning return or repair as the case may be Warranty Customer shall notify Company in writing of any defects of the Products Company s sole obligation under the foregoing warranty is at Company s option to repair or correct any such covered defect or to replace or ex change the Product provided Cus tomer has returned the Products with a copy of the original invoice to the Company or one of its authorized re pair shops at his own cost Any re paired corrected replaced or ex changed Products shall be subject to the warranty set forth in section Warranty and limitations follow ing their repair correction replace ment or exchange If Company has received notification from Customer and no defects of the Product could be discovered Customer shall bear the costs that Company incurred as a result of the notice The warranty period for the CRAFTY Vaporizer begins on the date when the Product is physically delivered to the Customer s site and is valid for twenty four 24 months thereafter Company does not authorize any per son or party to assume or create for it any other obligation or liability in con nection with the Products except as set forth herein 14 WAR
31. ris WARNING Please consult your doctor or pharmacist if you have any medical concerns It is possible that some plants may cause allergic reac tions for the user If this occurs it is urgently recommended to refrain from further use of such plants Only use the plant parts which are found in this list and which have been verified according to the regulations of the European or any other pharma copoeia with regard to genuineness purity and pathogenic germs You can purchase such plants or plant parts in pharmacies Lavandula angustifolia Any other use is inappropriate and po tentially dangerous Information and up to date news about plants suitable for vaporization will be published on www storz bick el com Portion of the Temperature plant used setting the leaves the cones the blossoms the blossoms the leaves the leaves the herb 130 C 266 F 154 C 309 F 190 C 374 F 130 C 142 C 288 F 190 190 374 374 374 F 266 F C 374 F C 374 F It is important to observe the following instructions in order to set the CRAFTY Vaporizer with the plant material in the best possible way for your personal re quirements This statement has not been evalu ated by the FDA The CRAFTY Vapor izer is not a medical device and is not intended to diagnose treat cure or prevent any disease 5 FACTORS INFLUENCING VAPORIZATION The amount of aromas and fra
32. t not be kept near liquids or sources of heat and must not be damaged Do not wind the USB cable of the power adapter tightly nor pull it over sharp edges and never crush or kink it If the mains USB cable is damaged please contact our Service Center to have it replaced Never try to repair a power adapter USB cable yourself The use of multiple sockets and or extension cables is not recommend ed However if this is absolutely 2 SAFETY RECOMMENDATIONS necessary only products with a quality certificate such as UL IMQ VDE S etc may be used pro vided the specified power exceeds the power required A Ampere by the devices that are connected After use the Vaporizer must be placed on a stable flat surface To be used only at a sufficient distance away from heat sources ovens stoves fireplaces and in locations where the ambient temperature can not drop below 5 C 41 F Store the Vaporizer and power adapter in a dry place protected against the ef fects of weather and out of the reach of children or unqualified persons It cannot be used in damp locations such as bathrooms etc Do not operate the Vaporizer close to flammable objects such as cur tains tablecloths or paper Keep the Vaporizer and power adapter away from pets e g hamsters mice and other animals which could damage the insulation of the power adapter USB cable The Vaporizer and power adapter may only be repaired by our
33. t overview of the CRAFTY Cooling Unit The Cooling Unit consists of Cap bit Mouthpiece Mouthpiece Seal Ring Cooling Unit Cap small Cooling Unit Base Upper Screen coarse Base Seal Ring _6 large 10 DISASSEMBLING CLEANING AND ASSEMBLING 10 1 Disassembling and reassem bling the CRAFTY Cooling Unit Turn the Cooling Unit with a 90 rota tion counterclockwise in order to re move it from the Vaporizer Pull out the Mouthpiece from the Cool ing Unit Cap rotate slightly back and forth while doing this and pull off the Mouthpiece Seal Ring Pulling the Mouthpiece from the Cooling Unit Cap Open the Cap Lock by pulling it rear wards Opening the Cap Lock Remove the Cap Lock from the cap by pulling up at one side If the Cooling Unit must be im mersed into alcohol ethanol the Cap Lock only has to be removed from the Cooling Unit Ex tended contact with alcohol can lead to whitening of the Cap Lock Label or disintegration of the glue Removal of the Cap Lock Separate the Cooling Unit Cap from the Cooling Unit Base by pulling off the cap upwards 10 DISASSEMBLING CLEANING AND ASSEMBLING Pull the Cooling Unit Cap from the Cooling Unit Base Remove the large and small Base Seal Rings Lever out the large Seal Ring from the recess in the notch using the Filling Chamber Tool Removal of the large Base Seal Ring Push the upper Screen downwards out of the
34. vice unat tended during operation Place the CRAFTY Vaporizer only on a hard heat resistant flat sta ble surface never on soft surfaces or flammable material Check whether the power supply voltage corresponds to the voltage rating listed on the pow er adapter The power adapter and USB cable must be in perfect condi tion Connect the power adapter only to a properly installed socket 7 4 Charging the battery The battery charge status is signaled by the blue light on the LED display Explanations on the battery display during the charging operation Steady blue light the battery is fully charged Blue slow flashing light the battery is between 61 and 96 charged Blue rapidly flashing light the bat tery is between 31 and 60 charged Blue flashing the battery is up to 30 charged Explanations of the battery display following switch off Steady blue light the battery is between 64 and 100 charged Blue slow flashing the battery is between 32 and 64 charged Blue rapidly flashing the battery is between 1 and 32 charged Blue flashing battery is completely discharged Check the housings of the Va porizer and the power adapt er for signs of damage each time before using or charging The Vaporizer may not be charged and neither Vaporizer nor power adapter used if these are damaged The battery charge of the new product has a level of up to 80 Fully charge before using for the
Download Pdf Manuals
Related Search