Speaker Attachment Bracket
Contents
1. Danger Do not stumble over the cords You may trip or may cause the products to topple over and cause injury ZNATTENTION If the following precautions are not observed injury or property damage may occur Do not install any equipment other than the specified product The WS 32SE1B WS 40SE1B WS 46SE1B speaker attachment bracket is designed for use with the specified equipment only If you install equipment other than that specified it may fall or break and cause injury Do not modify the products Do not place anything hot directly on the products The heat may cause discoloration or deformation of the products Be sure to secure the TV Sound Bar System and TV Secure the TV Sound Bar System and TV firmly when installing them together Then secure the TV Sound Bar System installed TV firmly on the stand If the TV Sound Bar System and TV are not installed securely they may fall or topple over and cause injury Do not apply weight to the products or subject them to any kind of impact When installing the TV Sound Bar System to a TV stand do not apply weight to the TV Sound Bar System or TV with your hand Do not hit the TV Sound Bar System or TV with hard objects such as a screwdriver etc continued 968 Sound Bar System installed TV If you move the products forcefully damage or injury may result Be sure to follow the proper procedures and advice given below2. Be sure that two or more persons carry the TV Sound Bar System installed TV and only after unplugging and removing the connected equipment Be careful not to allow your hands or feet to be pinched under the bottom of the TV Sound Bar System installed TV Do not drag the TV Sound Bar System installed TV The base part may come off and damage the floor When carrying the TV Sound Bar System installed TV do not hold it by the TV Sound Bar System Doing so may cause damage or injury When moving the TV SO Prohibited Notes on installation When assembling spread a cloth on the floor to avoid damaging the floor nstall the products on a solid and flat floor Be sure that two or more persons install the products Doing it alone may result in an accident or injury Be sure to keep children away during the process Be sure to install the products securely following the instructions Tighten the screws securely If the TV Sound Bar System is not installed securely it may fall and cause damage or injury Becareful not to pinch your fingers or hands when assembling the products Notes on cleaning Clean with a soft cloth slightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as thinner benzine or alcohol If you have any questions or problems concerning this product please consult your nearest Sony dealer 468 Table of Contents Un
3. Toll free 0 eee eee eee eee es 0120 333 020 0466 31 2511 From Mobile phone PHS and some IP phone From Mobile phone PHS and some IP phone Contact to this Sony service for consulting to purchase the Operating Instructions Remote etc Sony service for repairing Toll fra amp ioo hse ancdainneca eet 0120 222 330 0466 31 2531 http www sony co jp support After connecting to the number shown left press 306 and SHa during the first announcement is hearing Then it is connected to the Sony customer service Fax for both service 0120 333 389 Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan 4 269373E1 1 Sony Corporation Printed in Malaysia
4. on the products as they may fall on you and cause serious injury Pay attention to the location Q Do not expose the products to rain Prohibited or moisture or spill liquid of any kind on them It may cause a fire or electric shock Never place the products in hot humid or excessively dusty places or in a place where they are subject to mechanical vibrations Doing so may cause a fire or electric shock Keep flammable objects or open flames e g candles away from the products Do not install the products over or under an air conditioner If the products are exposed to wind from the air conditioner for an extended period of time or get wet by water leakage from the air conditioner this may cause a fire an electric shock or malfunctions Do notallow the cords to be pinched Q If the AC power cord mains lead or connecting cords are pinched between the products and the wall floor or other object or bent or twisted by force the internal conductors may become exposed and cause a short circuit or an electrical break This may cause a fire or an electric shock Do not step on the AC power cord mains lead or connecting cords when you carry the products The cord may be damaged and this may result in a fire or electric shock Danger Prohibited Do not cover the ventilation holes of the products f you cover the ventilation holes with a cloth etc heat may build up inside and cause a fire
5. Gay O N Y 4 269 373 E1 1 speaker Attachment Bracket Operating Instructions WS 32SE1B WS 40SE1B WS 46SE1B Thank you for purchasing this unit This manual explains important safety instructions to prevent accidents and operating instructions for this unit Read this manual carefully and use this unit safely Once you have read this manual make sure you keep it for future reference 2011 Sony Corporation About This Manual The instructions in this manual are for model WS 32SE1B WS 40SE1B WS 46SE1B The illustrations used in this manual are of the WS 32SE1B model and they may be different from your model Any differences in operation are marked in the manual as WS 32SE1B model only Warning about installing the TV Sound Bar System to the TV stand This WS 32SE1B WS 40SE1B WS 46SE1B speaker attachment bracket is used for SA 32SE1 SA 40SE1 SA 46SE1 TV Sound Bar System and the particular TV models only Use with other products or for other purposes than those specified may cause damage or injury To Customers Sufficient expertise is required for installing this product Be sure to pay special attention to safety during the installation Sony is not liable for any damages or injury caused by mishandling or improper installation or installing anything other than the specified product Your statutory rights if any are not affected On Safety Products by Sony are designed with safety in mind If the products a
6. The screws at the TV stand 658 2 Remove the screws from the original neck then detach the original neck from the TV stand F 1 d4 Original neck Stand base ME amp amp Screws for the stand e The 32 inch and 40 inch model 2 screws The 46 inch model 3 screws 3 Install the extension neck for TV stand to the TV stand using the screws removed in step 2 i to The screws removed in step 2 continued dn Buimas 198 4 Remove the screw on the rear cover of the TV Sound Bar System then remove the rear cover TV Sound Bar System Rear cover D Mount the attachment bracket to the TV Sound Bar System with the screw for attachment bracket PSW M5 x 12 mm Q Check the engraving on the rear of the attachment bracket and use a suitable bracket for the TV For details refer to the supplied Compatible list 968 6 Remove the screws from the rear of the TV Be sure to place the TV on a soft thick cloth with the TV screen facing down to prevent damaging the surface of the LCD The screws at the rear of the TV dn Bumes T Mount the TV Sound Bar System to the TV with the screw for attachment bracket Silver Q Be sure to fasten the screws to the screw holes pointed with mark Notes After installation the screw for attachment bracket Silver will protrude from the screw hole This is not a malfunction When carrying the T
7. V Sound Bar System installed TV do not hold it by the TV Sound Bar System Doing so may cause damage or injury continued 968 O Attach the TV to the TV stand Match the screw protrusion to the notch on the TV stand Note When attaching the TV to the TV stand make sure to hold the TV instead of the TV Sound Bar System 9 Secure the TV to the TV stand with the screw for TV stand head PSW M5 x 20 mm 1 O After you have made all connections you can use the cable clamp Q to neatly secure the cables Note As a protective measure secure the TV For details see Preventing the TV from toppling over 10 Preventing the TV from toppling over As a protective measure secure the TV If you fail to do so the TV may topple over resulting in serious injury Warning To avoid injury place the TV Sound Bar System installed TV less than 25 cm from the wall and firmly secure the TV to the wall Notes Be careful not to pinch your fingers when setting up the TV or rack Install the TV after allowing for a space of less than 25 cm from the wall The wall will prevent the TV from falling even if the TV leans backward towards the wall dn Bumes H When installing the TV on a rack 1 Place the TV on the center of the rack 2 Fit the support belt to the TV stand then firmly fasten with the screw for support belt PSW M4 x 10 mm Q using a screw driver 3 Fasten the support bel
8. packing es 5 Setting Up esses 6 Installing the TV Sound Bar System on the TV stand oo eect erence 6 Preventing the TV from toppling over 11 Adjusting the angle of the TV 13 Specifications 14 Unpacking Operating Instructions this manual Cable clamp 2 Compatible list 1 Attachment bracket 32 A For WS 32SE1B 1 Support belt 1 40 46 A For WS 40SE1B WS 46SE1B 1 Screw for support belt PSW MA x 10 mm 1 Wood screw for support belt M3 8 x 20 mm 1 40 46 B For WS 40SE1B WS 46SE1B Qe 1 Anchor bolt 2 Screw for attachment bracket PSW M5 x 12 mm Q 2 Screw for attachment bracket Silver 9 2 Screw for TV stand head PSW M5 x 20 mm Q 3 568 Buryoedun Setting Up You can use this speaker attachment bracket to install the TV Sound Bar System on the TV stand Notes This speaker attachment bracket is designed for use with the stand supplied with TV only This speaker attachment bracket cannot be used with the SU FL71M SU FL71L floor stand If you want to hang the SA 32SE1 SA 40SE1 SA 46SE1 TV Sound Bar System hang it directly on the wall Installing the TV Sound Bar System on the TV stand 1 Remove the screws from the TV stand then detach the TV from the TV stand
9. re used incorrectly however it may result in a serious injury through fire electric shock the product toppling over or the product dropping Be sure to observe the precautions for safety to prevent such accidents 268 NWARNING If the following precautions are not observed serious injury or death through fire or electric shock the product toppling over or falling can result Do not drop the products or install them where there is a possibility of them falling down Be sure to subcontract installing moving or Prohibited dismounting the products to licensed contractors and keep small children away during the procedure Unauthorized installation may result in serious injury or property damage Having an unauthorized dealer carry or dismount the TV Sound Bar System or the TV Sound Bar System installed TV may lead to the products falling and result in serious injury or property damage Make sure that two or more persons carry or dismount the product s Do not remove screws etc after mounting the TV Sound Bar System or the TV Sound Bar System installed TV Do not handle the products with excessive force 9 Prohibited during cleaning or maintenance Do not place any object on the products Do not put anything on the products If you do so the system may fall and cause injury or property damage Prohibited Do not lean or hang on the products Do not lean or hang
10. t to the rack with the wood screw for support belt M3 8 x 20 mm Q continued 1168 Securing the TV to a wall Prepare a strong string or chain not supplied and a fastener not supplied for fastening to the wall Secure the fastener to a reinforced wall Even if you have secured the TV to the rack be sure to secure it to a wall by following this procedure 1 Remove the screws from the rear of the TV The screws at the rear of the TV 1268 3 Secure the fastener to the reinforced wall and then thread the string or chain through the holes of the anchor bolt and the fastener Q Firmly tie both ends of the string or chain together Less than 25 cm Less than 25 cm aM suoneoyioeds dp Buas 7 F TV installed on the floor TV installed on a rack Adjusting the angle of the TV 1365 Specifications Attachment bracket 32 A Dimensions w h d approx 250 mm x 216 mm x 35 mm Mass approx 1 1 kg Attachment bracket 40 46 A Dimensions w h d approx 334 mm x 227 mm x 35 mm Mass approx 1 3 kg Attachment bracket 40 46 B Dimensions w h d approx 332 mm x 232 mm x 35 mm Mass approx 1 3 kg Extension neck for TV stand Dimensions approx 43 mm x 216 8 mm Mass approx 0 66 kg Design and specifications are subject to change without notice 14 See the following website for a FAQ and solutions Sony service for operation the products
Download Pdf Manuals
Related Search