ICS-SP30 - Manuals, Specs & Warranty
Contents
1. 16 Captioning Setup This submenu is used to control the default values for the Closed Captioning function on the tuner Setup Captioning Restore User Settings No On Captioning Off On When Muted Digital Captioning Mode cs 1 Off Analog Captioning Mode Image 16 Captioning Options Menu Restore User Setting This setting allows for the selection of allowing user settings for CC to be stored between power cycles or to always use a default setting on power on Select NO to override the previous user CC setting on power on using the default settings or select YES to allow the previous user setting to be used on the next power on Captioning This setting allows three options for Closed Captioning at the default power on status ON Closed Captioning will be set to ON at power on ON WHEN MUTED This setting will have the ICS SP30 display Closed Captioning content when the user Mutes volume OFF This setting has the Closed Captioning set to OFF as the default Digital Captioning Mode This setting allows the selection of the CC mode to be used for the Digital Channels Analog Captioning Mode This setting allows the selection of the CC mode to be used for the Analog Channels 17 V Chip Setup This submenu sets up default options for the V Chip settings setup V Chip Restore User Settings No V Chip Menu Item Yes Reset Access Code je Default Limits p Image 17 V Chip Options Menu Restore2. Channel 1 Type Digital Startup Channel Browse Digital Channels j Selection Method Direct Digital Channel 106 3 Label z Logo ESTI ka Usage Audio and Video Image 3 Edit Channel Submenu Channel Using remote enter the number of the channel to manage or to setup the Startup Channel select Startup Channel The Startup Channel is a feature to have a specific channel tuned as the default whenever the TV turns on The Startup Channel may also be an AV Input in the case where an external media device is used for the PPV system A Startup Channel does not need to be a channel that is in the channel ring Include in List This function allows a channel to be removed from the Channel Ring available channels without losing stored data Select Yes to include No to exclude Type Selection options include Analog Analog NTSC Channels from 1 127 Digital Digital Channels Select Digital to remap the digital QAM or 8VSB channel to an analog channel number A V Input Provide access to TV A V Inputs through remapping the input to an analog channel number Note A V Input remapping may not function with all PPV providers For details on using A V Inputs while in Lodging Mode consult the section on A V Input mapping Note Depending on the selection type the menu options will change for the Channel List menu Analog Type Selection The options for an analog channel include a customized Label for the cha
3. This setting is used for Lodging Mode to allow remapping of a Digital Channel or AV Input to exist in a controlled hospitality system Select YES to have the settings for the channel specified maintain the mapped information Note Analog tune commands are the only tune commands that can be re mapped If your PPV provider does not use analog tune commands they will need to implement them before this function will work Note Before this function is used the PPV provider must be consulted due to differences in command structures between PPV providers the necessity to include the re mapped channel in the ring and other proprietary concerns 10 Switch On Options Menu This menu provides options for setting up default settings for when the display first turns on These settings are particularly useful in a lodging environment to be sure the display starts on the Startup Channel and to pre define volume screen format and other settings setup Switch On Channel Startup Channel None Volume 25 Startup Channel Picture Format Widescreen Restore Power Standby On gt Off Hold Off Timer 5 Sec Off On Hold Off Timer 5 Sec Image 9 Switch On Options Menu Channel Allows for the configuration of a default channel None Allows PPV system to define startup channel Startup Channel Uses the information configured for Startup Channel on Edit Channel Submenu This may include an A V Input Restore Returns the TV to t
4. ICS SP30 User Guide Enseo Inc 401 International Parkway Suite 100 Richardson Texas 75081 www Enseo com Introduction The ICS SP30 is a professional tri band tuner providing 8VSB QAM and NTSC tuner function for internal connection to a line of Sony Professional LCD and Plasma displays The ICS SP30 includes support for Pro ldiom decoding on lodging systems supporting this encryption technology This document outlines the installation set up and operation of the ICS SP30 For questions or to check for updated information on this product please check www sony com support for more information Table of Contents Hardware Setup Shipped Components Setting up the ICS SP30 Connections Powering On Menus Configuration General Operations Remote Control Functionality Navigating Menus Set Up Menu Channel Options Switch On Options On Screen Display Options Control Options Captioning Options V Chip Options Service Options Exit User Menu Captioning Digital Captioning Mode Analog Captioning Mode Sleep Timer SAP Source Picture Format V Chip Options Exit Operation General Operation Lodging Mode Stand Alone Mode Troubleshooting FAQ Technical Specifications FCC Statement amp Acknowledgement Hardware Setup Supplied Accessories Images not to scale ICS SP30 Card HDMI Cable Card Adapter Notes Compatible Displays The ICS SP30 c
5. User Setting This setting allows for the selection of allowing user settings for V Chip to be stored between power cycles or to always use a default setting on power on Select NO to override the previous user V Chip setting on power on or select YES to allow the previous user setting to be used on the next power on V Chip Menu Item This setting controls whether the user has access to the V Chip selection and settings Selecting YES will allow the V Chip menu item to appear on the user menu Selecting NO will cause the V Chip settings to no be user accessible and they will not appear on the user menu Reset Access Code This is an open setting to allow for the reset of the code In set up mode this code can be overwritten without knowing the previous code This is useful incase the previous user forgot the code The code will be reset to the default code of 0000 18 Default Limits This section allow for various default values to be set for the tuner setup V Chip Enable V Chip Select TV Ratings Select Movie Ratings Change Access Code Image 18 V Chip Default Limit Submenu Enable V Chip This setting is a YES NO selection By setting YES the default V Chip settings will be active when the ICS SP30 starts up Selecting NO disables the V Chip settings Select TV Ratings This matrix allows for allowing or restricting various settings including the TV industry Parental Guide ratings and new specific ratings TV
6. Y All Children TV Y7 Directed to Older Children TV G General Audience TV PG Parental Guidance Suggested ests ao sil TV 14 Parents Strongly Cautioned TV MA Mutual Audience Only W 7 FV Fantasy Violence cartoons TV G V Violence aes S Sexual Situations Taa x a L Language D Suggestive Dialog lt TV MA Block All Unblock All Press O to select toggle Use the arrow keys to highlight a box in the matrix and then use the 0 Image 19 V Chip TV Ratings button on the remote is used to toggle between selections When finished move to the OK box and press 0 to save settings and exit 19 Select Movie Rating Limit Rating PG PG 13 R NC 17 x Not Rated Block All Ok Unblock All Press O to select toggle Image 20 V Chip Movie Ratings le V Chip No t TV Ratings gt Change V Chip Access Code Enter New Code w Re enter Code M Lor alot Press O to select Image 21 V Chip Reset Function Select Movie Ratings This menu allows for the authorization or exclusion of content based on the Movie Rating system G Children and Family PG Parental Guidance Suggested PG 13 Parental Guidance Special Guidance to children under 13 R Restricted No one under 17 without an adult NC 17 No children under 17 X Adult content Adults only Not Rated Some films are not rated and other content is beyond NC 17 and withdrawn before rating Use the arrow
7. ard is compatible with the following Sony Displays KLH W26 KLH W32 FWD 40LX1 FWD 32LX2 FWD 40LX2 FWD 50PX2 FWD 42PX2 DVI HDCP Displays Some Sony Displays require an HDMI to DVI adapter and audio adapter cable for audio not supplied and may require a longer HDMI cable than the 12 cable supplied PX2 models These include FWD 40LX1 FWD 42PX2 FWD 50PX2 FWD 50PX3 Setting Up the ICS SP30 Making Connections The ICS SP30 is designed to function with Sony Professional LCD and Plasma displays which may differ in input types and connection configuration For questions on connections and specifications on specific Sony displays consult www sony com support Installing Card Step 1 Remove power cord from the display to ensure power is off Remove any populated cards in slot 1 and or slot 2 if any There may be a cover over slot 2 Remove the middle rail guide by removing screw between two card slots Step 2 If inserting the ICS SP30 into a KLH display skip to step 3 ita For other displays attach card extender to left side of the ICS SP30 and tighten The finished card should look like image at right Step 3 Carefully insert the ICS SP30 card into the card slot Do not allow components to come into contact with edges of the card slot Note S Video input should be on the top edge of the card as it is inserted DO NOT FORCE CARD When card is completely inserted it should fit into the two internal connectors an
8. ate press the Right arrow button on the remote from this menu line NOTE By selecting this item the tuner will immediately begin the firmware update process and reboot when complete 21 Note During a firmware update the Display MUST NOT be unplugged or turned off Doing so while firmware is being downloaded and upgraded on the device could damage the unit and make it unusable lf the firmware update was initiated by mistake it will time out after 3 to 5 minutes Start Settings Update To manually initiate a Clone Setting update press the Right arrow button on the remote from this menu line NOTE By selecting this item the tuner will immediately begin the process of downloading and storing settings stored on the Enseo Galileo System Server Restore Factory Settings This function allows the tuner to be reset to the factory settings Changes channel lineup programming and other setup customizations will be lost and the tuner will return to factory settings Read TV Settings This function initiates a Read command in the ICS SP30 to read the settings values in the TV This is used to collect Clone data for a System Clone through the Enseo Galileo System Server Show Status This menu item will activate a status window showing important information about the display tuner firmware versions and other diagnostic data 22 USER MENU User menus are accessed using either the lodging remote provided in the hotel room or the
9. available in the channel ring prior to ee nee identifying them for use with the orbit i KDFI 27 function 8 WFAA 8 5 KXAS5 e a ataka sga gtd 9 KDAF 33 Text labels in this section are available if Press 0 to toggle the label information is entered in the edit channel Page 8 Image 15 Select Channels PPV Terminal Options This submenu provides options for specific hospitality configuration requirements including Terminal Controls Volume Default is YES for the lodging terminal device to control the volume In some specific installations this may need to be set to NO for the ICS SP30 to control the volume adjustment independent of the lodging system Terminal Controls Sleep Default is YES for the lodging terminal device to control the command settings for the Sleep Mode In some specific installations this may need to be set to NO for the ICS SP30 to directly manage the Sleep Mode independent of the lodging system Terminal Controls CC Default is YES for the lodging terminal device to control the settings for Closed Captioning In some specific installations this may need to be set to NO for the ICS SP30 to control directly manage the Closed Captioning functions independent of the lodging system Auxiliary Control Options This submenu provides setting for Baud Rate of communications over the service port Baud rate of the serial communications port can be adjusted with fixed values from 1200 to 115200
10. d then the thumb screws can be tightened pp A AUD AUDIO cTRLS VIDEO m ne OUT IM AUDIO IN OUT N O O 9 le 16 Step 4 Attach the HDMI cable to HDMI Out on the ICS SP30 Note there is a required external HDMI cable from the ICS SP30 to the digital input of the display This is based upon strict requirements for HD tuners in hospitality Step 5 Attach COAX cable to RF input Step 6 Attach RJ12 data cable from PPV Provider box to the PPV CNTL input Step 7 Plug power into the Sony Display and using the PPV Provider remote press Power button The unit is now configured for hospitality mode with the PPV Provider Menus Configuration Stand Alone vs Lodging Mode The ICS SP30 is designed to operate in a Pay Per View environment connected to a lodging system that uses protocols and commands to control the display and tuner The ICS SP30 may also be able to operate in a Stand Alone mode to provide basic TV tuning for the Sony Display When the ICS SP30 is connected to a compatible lodging system the ICS SP30 will automatically recognize the lodging system and respond to the PPV commander In Lodging Mode the control buttons and IR commands from the Sony remote will not control the display and tuner Supported Remote Controls The ICS SP30 is designed to function with the remote control that shipped with the Sony display Because of differences in the display remotes in which not all remotes have th
11. e same available buttons some remotes may have limited functionality with the display remote In such case a standard Sony TV remote or universal remote such as Sony RM EZ2 using Sony IR commands can control the ICS SP30 in Stand Alone Mode Navigating Menus The menus in the operation of the ICS SP30 have been designed to use the Left Right Up Down buttons for most functions To return to a previous menu pressing the Left button Stand Alone Set Up Menu The ICS SP30 set up process includes a sequence of numbers pressed on the Sony remote to access the set up menus With the display and ICS SP30 powered on press the following in sequence note when pressing buttons press the buttons to be sure the system receives the code Setup Menu code Up Right Left Mute If a button is pressed in error press the Down arrow to clear the code entries In the lodging environment a different remote or function may be enabled to provide additional security Setup Bea Channel Options Switch On Options On Screen Display Options Control Options Captioning Options V Chip Options Service Options na a e a a a E Exit Image 1 Setup Menu Navigating Menus Most menus and submenus are navigated using the UP DOWN RIGHT LEFT arrows on the remote control To enter a menu press the RIGHT button To enter an item in a sub menu the ENTER button can be pressed or the LEFT arrow button can be pressed to exit a entry field a
12. ed HDTV and NTSC TV tuner with features that support lodging systems and stand alone operation Lodging Mode The tuner will automatically function in a lodging mode when attached to a compatible PPV system The tuner will communicate with lodging system identify the system and the necessary communication protocols and immediately send commands to the display necessary to function with the attached PPV system Stand Alone To control the tuner in stand alone mode the tuner must not be connected to PPV system If the display is connected to a PPV system first disconnect the RJ12 communication cable between the tuner and the PPV control box RJ12 is connected to CONTROL PPV In Stand Alone mode the tuner will respond to the Sony remote and other compatible PPV system remotes To access the User Menu in stand alone mode press the MENU button on the remote Note on LX2 remote The supplied remote controller for the Sony FWD 32LX2F and FWD 40LX2F does not have a Channel Up or Channel Down buttons To change channels on the tuner you must use the UP Arrow or Down Arrow on this remote or use any Sony TV remote such as the Sony RM EZ2 or universal remote supporting the Sony TV IR commands Controlling the Sony Display The tuner and displays are designed to use the same remote control shipped with the display while minimize conflicting commands that could cause the display and tuner to both react When the tuner is connected to the displa
13. es the Pro ldiom decryption technology for support of HD PPV systems from LodgeNet and OnCommand using Pro Idiom Q What is the warranty on the ICS SP30 A The ICS SP30 has a limited warranty from Sony against material defects for a period of 12 months from purchase date For more information on the warranty refer to www sony com support 26 Product Specification ICS SP30 Specifications 9 53 x D 3 48 x H 1 18 a Total Power Consumption 3 Watts Typical Internal power o r Digital SC JQAM 8VSBO S Tuner Digital AM 8 VSB With HDCP Outputs Digital Audio S PDIF S y gt D O Ko i Cp O gt S D O Q gt 2 D O 0 Product Safety isk Assessment based on IEC60950 Card uses internal power Standard CC Class B Ta a JJI TI English po Coordinate Font Color amp Position Control Display Internal Internal Ports PPV RJ12 Connector MTI command protocol FCC Statement amp License Acknowledgement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Manufactured under license from Dolby Laboratories Dolby and the double D symbol are registered trademarks of Dolby Laboratories DIGITAL 27
14. he last channel tuned prior to turning off by user Volume Set the numeric value from 0 to 99 that you would like to be used as the default volume level for the display Picture Format Select between different formats for the screen and content presented Options include Native This setting will show the aspect ratio of the source material 4 3 NSTC images will be shown with side bars Widescreen This setting will fill the screen with the image by stretching the image if necessary to create a 16 9 image Power Select the behavior for the ICS SP30 when AC power is lost and restored Settings include 11 Standby Return to a standby mode if power is lost or on first plug in Force On Turn on TV and Tuner if power is lost or on first plug in Note Force On mode may cause TV to turn on in lodging environment following power outage ON gt OFF Hold Off Timer This setting allows for a selectable period of time where the ICS SP30 will ignore additional IR button presses during a power off process This feature is used when guests may have situations where extra IR presses are causing undesirable interaction OFF gt ON This setting allows for a selectable period of time where the ICS SP30 will ignore additional IR button presses during a power on process 12 On Screen Display Options The On Screen Display Options settings provide for customization and set up of OSD options setup On Screen Display Show Volume Ind
15. icator Yes Use 3 Digit Entry Yes Show Channel Guide Yes fA Show Number Channel Banner Contents how Label A S A S Welcome Message Options how Logo Press 0 to toggle Image 10 On Screen Display Options Menu Show Volume Indicator This menu item is a Yes No selection for whether a visual representation on the volume adjustment should be shown on the screen when the user uses the volume up or down on the remote Use 3 Digit Entry This menu item is a Yes No selection for support of 3 digit numbers for channels over 99 and digital channels that may use a sub digit Show Channel Guide This menu item is a Yes No selection for whether a channel guide is active for the user to see the available channels on the display Channel Guide content is generated by the analog channel numbers and text labels for each channel Channel Banner Contents This menu item allows the selection of the content available on the display banner Selections include Show number The channel number Show Label The text label for a channel Show Logo The select graphic if any Use the 0 button when selecting or deselecting an option on this sub menu 13 Welcome Message Options This menu item provides for a way to have a welcome message shown on the display Show Message Yes No Line 1 First line of text Line 2 Second line of text Note If show message is yes And there is nothing in line one Or two the welcome message Will disp
16. keys to highlight a box in the matrix and then use the 0 button on the remote is used to toggle between selections When finished move to the OK box and press 0 to save settings and exit Change Access Code The V Chip Access Code can be set through the set up process using this function 20 Service Menu The HD tuner is an advanced media device with the ability of communicating through an RF network to maintain updated firmware and control The features outlined below are advanced functions designed for an integrated RF system This menu area is used to set up parameters for servicing the tuner or performing service functions setup Service Update Channel 0 Channel O Allow Update Searching Start Firmware Update Start Settings Update Restore Factory Settings Read TV Settings Show Status Image 22 Service Options Menu Update Channel This feature is used for setting a channel to perform firmware updates Using the numeric keys on the remote enter the channel that has been identified by your system administrator for firmware updates Allow Update Searching This YES NO selection either allows or prohibits the display from searching for an update channel for firmware updates Having this selected as YES will allow updates when the Update Channel needs to be changed for some reason and eliminates the need for setting up the update channel at installation Start Firmware Update To manually initiate a firmware upd
17. lay Acquiring Channel Setup Welcome Message Show Message Line 1 Line 2 Image 11 Welcome Message Submenu Control Options This setup section provides system level settings for the tuner card Setup Control ESP Source Menu Item Picture Format Menu Item Minimum Volume Maximum Volume Setup Key Sequence Orbit Options PPV Terminal Options Auxiliary Control Options Image 12 Control Options Menu ESP Energy Savings Protection This menu item allow for a setting of a default time off to protect against a TV being left on when a guest leaves a room without turning off the TV The mode can be set On or Off and the hours of inactivity until it turns itself off can be 1 to 9 hours Source Menu Item This menu item is a Yes No selection and allows control over whether a user through the user menu has access to input selection 14 Picture Format Menu Item This menu item is a Yes No selection and allows control over whether a user through the user menu has access to change the Image Format widescreen or native Minimum Volume Set the available minimum volume from 0 to 99 Maximum Volume Sets the available maximum volume from 0 to 99 Setup Key Sequence Provides a method for changing the key button sequence used to access set up features If these are changed make sure to write down the keys Failing to record these would require re cloning an entire system to restore the set up ke
18. nd store the setting Some sub menus require specific characters and onscreen instructions will be provided in such cases Channel Options The ICS SP30 supports analog and digital channels from cable or over the air sources Note Air To receive over the air channels an antenna and additional equipment may be required Cable Digital cable channels may not be accessible if conditional access or subscriptions are required Setup Channel Tuning Mode Cable Air Edit Channel List p Cable Clear Channel List p Auto Channel Install p Digital Channel Search Image 2 Channel Options Menu Tuning Mode Option is either Air Over The Air or Cable This setting can be changed using RIGHT arrow button to enter the setting and using UP or DOWN select either Air or Cable To save the setting press the LEFT arrow button Edit Channel List A submenu with functions to add delete and manage information regarding channels Clear Channel List Used to delete the stored channel list programming Auto Channel Install Used to scan and install channels Digital Channel Search Used to search for digital channels available Note these channels will not be automatically entered into the channel lineup Digital channels require entry management on the Edit Channel List menu Edit Channel List Submenu This submenu allows for manual add delete and management functions of channels setup Channel List Channel Startup Channel
19. nnel Addition of a thumbnail logo for the channel and selection of audio video options for the channel Digital Type Selection Browse Digital Channels Available for scanning through digital channels after they have been scanned using the Digital Channel Search function from the Channel Options Menu Note To browse the digital channels a standard Sony TV remote with CH CH buttons is required The remotes provided with the FWD and KLH model displays do not include CH CH buttons and cannot browse the scanned digital channels Selection Method Allows choice of Virtual or Direct Selection Digital Channel Setup Channel List Channel 1 Include in List No Type Analog Label Logo a Usage Audio and Video Analog Digital A V Input Image 5 Analog Channel Settings Setup Channel il Channel List Include in List No Type Digital Browse Digital Channels be Selection Method Direct DICIR Label Logo P Usage Audio and Video Allow Online Remapping No Analog Digital A V Input Image 6 Digital Channel Options This section provides for the entry of the Channel Primary digits and Sub Program digits for the known digital channel Label Entry using UP DOWN arrow buttons to enter a text label for the channel Note PPV systems may not use the label setting in the ICS SP30 and instead use own label method Confirm with your PPV provider if label informa
20. remote supplied with the display These menus are available to users to enjoy the features of the tuner and display Only a few control functions are available through the user menus Options Captioning Off Digital Captioning Mode cS 1 On When Muted Analog Captioning Mode CC 1l Of Sleep Timer Off SAP No Source Picture Format V Chip Options Exit Image 23 User Menu Captioning This feature allows the selection of OFF ON and On When Muted Using the arrow buttons highlight the desired setting and then press the Left Arrow button to save and exit the field Digital Captioning Mode This allows the user to select the format of the CC signal for digital channels Analog Captioning Mode This allows the user to select the format of the CC signal for analog channels Sleep Timer The sleep timer function allows the user to set the TV to turn off automatically after a selected number of minutes Options Captioning Off Off Digital Captioning Mode CS 1 15 Min Analog Captioning Mode ccl 30 Min Sleep Timer Off 45 Min SAP No 60 Min Source Tuner 90 Min Picture Format Widescreen 120 Min V Chip Options 180 Min Exit 240 Min Image 24 Sleep Timer Copyright 2007 Enseo Inc 23 Secondary Audio Programming SAP This menu item allows the user the option of turning on SAP audio if available Source If made user accessible from the Setup Menu the user will have the ability to select available inp
21. tion will be used Logo Usage Audio and Video Selectable menu of graphical logos for Setup Channel List adding a visual thumbnail for many Channel Startup Channel popular TV channels Type rie Ea Browse Digital Channels b LBX E S N Note PPV systems may not use the l us overvii EEY logo setting in the ICS SP30 and instead sp con NEIDE Direct e cT use own logo method Confirm with Digital Channel 106 3 Ore your PPV provider if label information Label Startup Ry FOX will be used Logo Emn E Re E H gag S D Page 1 8 7 w Q D Press 0 to select Image 7 Logo Options Usage Selection of Audio and Video default Audio only for music channels inputs or video only for video only usage Setup Channel List Allow Online Remapping T 1 Note Not all PPV systems allow Online remapping Please consult Enseo at 972 234 2513 to ensure your system is supported Browse Digital Channels gt Selection Method Virtual Include in List No Type Digital Digital Channel Label Logo gt Usage Audio and Video Allow Online Remapping No Image 8 Online Remapping Selection NOTE Lodging System Requirements for Channel Re mapping 1 The Lodging System MUST NOT explicitly delete the channel 2 The Lodging System MUST NOT add installation data for the channel 3 The Lodging System MUST use an Analog Channel Tune command to access the re mapped channel
22. uts on the display for use of attached media devices If this feature is not enabled on the Setup menu this item will not be visible on the User Menu Note The available inputs will be based on the model of display and video expansion boards installed if any Options ts Captioning Digital Captioning Mode Cs il Analog Captioning Mode cc 1 Sleep Timer Off Tuner SAP No AV Source Tuner Side Picture Format Widescreen 5 Video V Chip Options CVI 1 Exit b VGA Picture Format If made user accessible from the Setup Menu the user will have the ability to adjust the aspect ratio of content presented on the display If this feature is not enabled on the Setup menu this item will not be visible on the User Menu Note On Plasma monitors user access to Picture Format will be limited to prevent the potential for image retention Options Captioning Off Digital Captioning Mode C 1 Analog Captioning Mode cc Sleep Timer Off SAP No Source Tuner Native Picture Format Widescreen Widescreen Chip Options b 4 3 Expanded Exit Image 25 Picture Format V Chip Options If made user accessible from the Setup Menu the user will have the ability to set and control V Chip settings to restrict content from being shown on the tuner If this feature is not enabled on the Setup menu this item will not be visible on the User Menu Copyright 2007 Enseo Inc 24 OPERATION The HD tuner is an advanc
23. y sequence A key press sequence of up to eight buttons can be defined These keys are more than numeric keys and adds to the security for a system Setup Setup Key Sequence Key Press 1 Channel Channel Right Arrow Channel Left Arrow Mute Unused Unused Key Press 7 Unused Key Press 8 Unused Image 13 Setup Key Sequence Submenu Orbit Options This submenu provides options available on Sony Plasma monitors to allow selection of orbit by channel Orbit is a feature in the Sony Plasma monitors to reduce the potential for image retention from certain static images Sub menu Options Include Size This is the size of the orbit how large of an area to shift the display image Options include Small Medium and Large 15 Setup Orbit Cycle Time This is the duration of Size Sei GA time to complete a full shift of the image Cycle Time 10 seconds Medium through orbit includes shifts UP Select Channels a Large RIGHT DOWN AND LEFT to complete an orbit The selection options for Cycle Time are 10 seconds 30 seconds 60 seconds and 5 minutes Note The shorter the selected cycle time the more noticeable the orbit function will be to the user viewer Select Channels This selection area allows selection de selection of specific channels to implement orbit on Orbit Small Cycle Time 10 seconds Select Channels b Peres 3 Disc Channels must be setup and made 4 KDFW 4
24. y the Sony display will not show the Sony Menu All commands to control the display will be controlled by the tuner If you need to access the Sony display menu press in sequence the following remote buttons DISPLAY RIGHT LEFT MUTE The Sony display will now respond to the Sony remote for menu functions To exit this mode perform the above key sequence again 25 TROUBLESHOOTING The Display and or Tuner Do Not Respond to Remote Possible Remedies Check that the display has power attached Check that the Communication Cable is correctly attached to the PPV control box My Display Does Not Respond to The Remote or Button on the Display Possible Remedies It is possible that the Communication Cable became disconnected during operation and the display must be reset Review the Section Controlling the Sony Display on Page 18 for further details FAQ Q Which hospitality systems is the ICS SP30 Compatible With A The ICS SP30 is designed to be compatible with most major PPV Hospitality Systems including LodgeNet Tested and Certified Compatible OnCommand Tested and Certified Compatible SeaChange Tested and Compatible More Most lodging system operate on a similar standard of protocol commands for operation Ifa PPV provider is not listed above it may be possible for the ICS SP30 to work with this provider Q Does the tuner support LG Pro ldiom decryption technology A Yes The tuner includ
Download Pdf Manuals
Related Search