Sonic Alert - Teltex, Inc.
Contents
1. Sonic Alert The Skull Alarm Clock with Bone Crusher and MP3 Input Model SBS550BC OPERATION INSTRUCTIONS IMPORTANT Please read these instructions carefully before use and retain for future reference See operating instructions on back Use only the supplied adaptor to connect the unit Warning To prevent fire or shock hazard do not expose this appliance to rain or moisture Before connecting to mains make sure that the requirements specified on the apparatus corresponds to the available power supply 1 e AC120V 60Hz or AC230V 50Hz The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloth curtains etc No naked flame sources such as lighted candles should be placed on the apparatus It shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Do not place the product in closed bookcases or racks without proper ventilation The mains plug is used as disconnect device The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use To completely disconnect the power input the mains plug of apparatus shall be disconnected from the mains Only use attachments accessories specified by the manufacturer GENERAL DATA Power Consumption Adaptor AC9V 900MA UL listed transformer Underwriters Laboratories for USA CE Approved transformer for E2. attery to aviod leakage OPERATION Setting the correct time 1 Press and hold the Time Button 13 at the same time press the Hour Button 11 to advance the clock display rapidly until the hour is correct press the Minute Button 12 to advance the clock display rapidly until the hour is correct 2 A lighted dot 2 in the upper left of the clock display indicated the time is PM For AM time indication the dot 2 does not light up Setting the alarm time 1 Simply follow the instructions mentioned under Setting the correct time except that you will have to press the Alarm Set Button 10 instead of the TIME Button 2 Make sure the alarm time is correctly set for AM or PM the lighted dot 2 indicated PM Be sure to release the HOUR and MIN set buttons before releasing the ALARM button Waking to Alarm 1 After setting the alarm time set Function Switch 3 to choose VIB BUZZ or VIB BUZZ 2 Set to VIB for bed shaker BUZZ for sound or VIB BUZZ for both buzzer and vibrator 3 Set desired Volume 7 for buzzer sound 4 When the alarm sounds the Flashing light display 7 will flash continously until the alarm is stoped This will work under all three wake up modes 5 When the alarm sounds the Skull eyes LED 6 will flash continously until the alarm is stoped This will work under all three wake up modes Shutting Off Alarm The alarm can be shut off temporarily for the day or shut off permanently 1 Wh
3. e instruction manual for future reference oo pE Features show on diagram above 1 Alarm Indicator 8 Flashing Light Display 15 Bone Crusher Output 2 PM Indicator 9 Tone Control Knob 16 AUX Line in Jack 3 Alarm Function Switch 10 Alarm Set 17 AC Adaptor 4 Dimmer Switch 11 Hour Button 18 Battery Compartment 5 Skull Snooze button 12 Minute Button 19 Hour Format amp Power 6 Skull LED Light 13 Time Set Button Cycle 7 Volume Knob 14 Alarm Off Button INSTALLATION AC 9V Power Input Attach the AC power supply input to the side of clock at AC9V IN 17 next to the VIBRATOR input 15 smaller input of the two Important do not confuse AC input with vibrator input The eyes of the skull will light up continuously when it is connected to the power source Bone Crusher Vibrator Figure B 1 Attach the bed shaker jack to the back of the clock at VIBRATOR input 15 2 Place Bone Crusher under mattress best or pillow Battery Backup To use the battery backup you can install a 9 volt alkaline battery in the back of the clock located under the battery cover 18 Note the LED display will not light up during power failure but the clock will still be running and keeping proper time until the power is restored NOTE For the best results it is recommended that the battery be changed every 6 8 months If the clock is not used for a while it is recommended to remove the b
4. e supplied line in cable to the back of the unit labelled AUX in 16 the other end plug into the earphone headphone socket of the music player 2 Set the volume knob 9 on the clock unit to a desired volume level 3 Play your music player and set the volume to a suitable level on your player NOTE a The clock unit will automatically switch to the AUX mode once the line in cable is plugged into the unit b The Tone Knob does not function in the AUX mode Made in China Sonic Alert 1050 East Maple Rd Troy MI 48083 www sonicAlert com 1 800 566 3210 V TTY
5. en the alarm goes off simply press the AL off button 3 once the alarm will shut itself off for the day and come back on the next day at the same time if the alarm setting has remained unchanged 2 To shut off the alarm permanently slide Function Switch 3 to OFF positon Snooze Operation When the alarm sounds press the Skull SNOOZE button 5 the alarm will be turned off for 9 minutes for extra sleep The alarm will come back again after 9 minutes You may repeat many times up to 119 minutes Volume To adjust the volume rotate the Volume Knob 7 located on the upper right hand side until you have reach your desired level Tone Adjust the tone by rotating the Tone Knob 9 located on the right hand side just below the Volume Knob 7 until you have reach your desired level Tone will only work for alarm sound it will not adjust for MP3 operation Dimmer The brightness of the LED clock display can be adjusted using the Dimmer Switch 4 Two intensity Hi Low can be set Hour Format and Power Cycle 19 this setting determines to correct speed that your clock will operate at Please select the appropriate settings for use For USA please select 12 60Hz for Europe please select 24 50Hz for UK please select 12 50Hz Please note the incorrect selection of power cycle will result in incorrect time To Play Music using a Player MP3 through AUX IN MP3 player not included To play music from CD MP3 player Radio etc 1 Plug th
6. urope Made in China Sonic Alert 1050 East Maple Rd Troy MI 48083 www sonicAlert com 1 800 566 3210 V TTY CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE THE COVER The Lightening flash and OR BACK FROM THE The exclamation mark arrowhead within the PRODUCT NO USER within the triangle is a triangle is a warning sign SERVICEABLE PARTS warning sign alerting you alerting you of dangerous INSIDE REFER of important instructions voltage inside the product SERVICING TO YOUR accompanying the product SONIC ALERT WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Attention should be drawn to the environmental aspects of battery disposal This indicating separate collection for electrical and electroinc equipment SONIC ALERT S 1 YEAR LIMITED WARRANTY The Skull alarm clock Model SBS550BC is warranted Against manufacturing defects in materials and workmanship For 1 year from the date of purchase Within this period Sonic Alert will repair or replace at our option the SBSSSOBC without Charge for parts and labor Simply send the SBS550BC postpaid And a copy of your sales slip as proof of purchase to Sonic Alert Inc 1050 E Maple Road Troy MI 48083 USA Sonic Alert Made in China Sonic Alert 1050 East Maple Rd Troy MI 48083 www SonicAlert com 1 800 566 3210 V TTY INSTRUCTIONS The Skull ALARM CLOCK WITH Bone Crusher MODEL SBS550BC Please retain th
Download Pdf Manuals
Related Search