Operating Instructions
Contents
1. connected to your TV or VCR set the NOISE FILTER switch to ON to INPUT B jacks Transmitter 1 ome H js rose AE Left channel white Right channel red Connecting cord supplied to stereo mini jack TV etc Notes e If you connect the transmitter to LINE OUT or REC OUT jacks of an audio reproducer such as an MD player or CD player do not set the NOISE FILTER switch to ON Otherwise volume will be limited e The NOISE FILTER switch is active only in the case of the connection shown in diagram on page 7 and In diagram the switch has no effect e When the transmitter is placed on or near a TV it may pick up a noise In such case place the transmitter away from the TV 2 Connect the supplied AC power adaptor to the transmitter to an AC outlet Transmitter gt AC power adaptor supplied ce to DC IN 9 V jack Notes e Do not connect to the INPUT A jack and INPUT B jack at the same time If you connect two audio visual components to both jacks at the same time both of the audio signals may result in mixed output e Use only the supplied AC power adaptor Do not use any other AC power adaptor re Polarity of the plug e If the connected equipment has the AVLS Automatic Volume Limiter System function be sure to turn the function off when using the transmitte2. and then tilt them back as illustrated above Right housing Left housing When the indicator does not light in green Check if the right and left headphones are rested on the transmitter correctly The indicator will not light up if the headphones contact point does not meet the transmitter s contact pin Remove the headphones and replace them on the transmitter again so that the indicator lights in green To recharge the headphone battery after use Place the headphones on the transmitter after use Since the built in timer recognizes when charging is complete there is no need to remove the headphones from the transmitter after charging Notes e The transmitter automatically turns off while charging the batteries e This system is designed to charge only the supplied rechargeable batteries type BP HP550 for safety Note that other types of rechargeable batteries cannot be charged with this system e If dry batteries are installed they cannot be charged e Do not attempt to use the supplied BP HP550 rechargeable batteries for other components They are for use with this system only e Charge in an environmental temperature of between 0 C and 40 C between 32 F and 104 F continue to next page 5 Charging and usage hours Approx Approx usage charging hours time 1 hour 50 minutes 16 hours 10 bourse 1 at 1 kHz 1 mW 1 mW output when the VIBRATION switch is set to OFF 2 ho
3. driver unit and insert the edge of the pad into the groove as illustrated di est Make sure that the entire edge of the ear pad is securely inserted into the groove 11 amp Additional information ER Precautions e When the transmitter is not to be used for a long period of time disconnect the AC power adaptor from the AC outlet holding the plug and remove the batteries to avoid damage caused by battery leakage and subsequent corrosion e Do not leave the wireless stereo headphones system in a location subject to direct sunlight heat or moisture It is recommended to use the headphones at a temperature of between 5 C and 35 C between 41 F and 95 F Do not drop hit or otherwise subject the transmitter or headphones to strong shocks of any kind This could damage the product Notes on headphones Preventing hearing damage Avoid using headphones at high volume Hearing experts advise against continuous loud and extended play If you experience a ringing in your ears reduce the volume or discontinue use Caring for others Keep the volume at a moderate level This will allow you to hear outside sounds and to be considerate to the people around you If you have any questions or problems concerning the system that are not covered in this manual please consult the nearest Sony dealer Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work 12 eee Tr
4. the sound becomes distorted or noisy Note The rechargeable nickel metal hydride batteries should be replaced with new ones when they last only half the expected time after a proper recharging The rechargeable batteries type BP HP550 are not commercially available You can order the batteries from the store where you purchased this system or at your nearest Sony dealer Setting up the transmitter 1 connect the transmitter to audio video equipment Select one of the hookups below depending on the jack type To connect to a headphones jack Transmitter p1 cawet Ri Ms wennen _ ON OFF Left channel white to INPUT B jacks Right channel red sa Connecting cord supplied D y Unimatch plug J adaptor supplied to headphones jack stereo mini jack to headphones jack stereo phone jack WALKMAN TV VCR etc WALKMAN is a registered trademark of Sony Corporation to represent Headphone Stereo products To connect to LINE OUT or REC OUT jacks Transmitter 1 me K rosenen Kl to INPUT A jack Connecting cord supplied Left channel white Right channel red UU Stereo system VCR etc to LINE OUT or REC OUT jacks continue to next page 7 To connect to TV etc If noise occurs when the transmitter is
5. F880R 1 e Unimatch plug adaptor 1 stereo mini jack gt stereo phone plug wei e Connecting cord 1 phono plugs gt stereo mini plug 1 m 3 3 ft Charging the supplied rechargeable batteries The supplied rechargeable nickel metal hydride batteries are not charged from the first time you use them Be sure to charge them before use To charge the headphones place them on the transmitter 1 Press the button of the left housing to open the battery compartment lid The battery compartment lid comes off Button 2 Insert the supplied rechargeable nickel metal hydride batteries into the battery compartment matching the terminals on the batteries to the marks in the compartment Do not use rechargeable batteries other than the supplied ones 3 Close the battery compartment lid O Q tw 4 connect the supplied AC power adaptor to the transmitter Transmitter to an AC outlet AC power adaptor supplied to DC IN 9V jack 5 Rest the headphones on the transmitter so that the headphones contact point meets the transmitter s contact pin while making sure that the charging indicator lights in green Charging is completed in about 16 hours and the charging indicator goes off When placing the headphones on the transmitter be sure to hold them level with both hands and that the right and left housings are placed straight down on the transmitter
6. S Headphone technology is incorporated under license from SRS Labs Inc Notes on receiving performance This system utilizes very high frequency signals in the 800 MHz band so the receiving performance may deteriorate due to the surroundings The following examples illustrate conditions that may reduce the reception range or cause interference e Inside a building with walls containing steel beams e An area with many steel file cabinets etc e An area with many electrical appliances capable of generating electromagnetic fields e The transmitter is placed on a metal instrument An area facing a roadway Noise or interfering signals exist in the surroundings due to radio transceivers in trucks etc e Noise or interfering signals exist in the surroundings owing to wireless communication systems installed along roadways Table of contents Getting started WNPACking esst 4 Charging the supplied rechargeable Batteries dsena eian e 4 Setting up the transmitter ccceeee 7 Operating the system Listening to a programme cscceeeeeeeee 9 The effective areas of the transmitter 11 Replacing the ear pads ccccccceeees 11 Additional information PreCaUtiON En 12 Troubleshooting ccccecceseesecestesteseeseeneenes 12 SpecificatOns ns sinna iR 14 amp Getting started Unpacking Check that you have the following items before using the headphones e The headphones MDR R
7. S O N Y 3 263 524 32 1 Wireless Stereo Headphone System Operating Instructions MDR RF amp 80RK 2005 Sony Corporation WARNING To prevent fire or shock hazard do not expose the unit to rain or moisture To prevent fire or shock hazard do not place objects filled with liquids such as vases on the apparatus To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only Do not install the appliance in a confined space such as a bookcase or built in cabinet di Hereby Sony Corp declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC For details please access the following URL http www compliance sony de Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or ees on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural reso
8. aptor PC 234S stereo mini jack lt gt stereo phone plug e If you have lost the supplied connecting cord RK G129 1 5 m 4 9 ft stereo mini plug gt phono plug x 2 Design and specifications are subject to change without notice LE H rmed intygar Sony Corp att detta h gtalarsystem star i verensst mmelse med de v sentliga egenskapskrav och vriga relevanta best mmelser som framg r av direktiv 1999 5 EG Mer information finns p webbadressen http www compliance sony de Undertegnede Sony Corp erkl rer herved at f lgende udstyr overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF Yderligere oplysninger findes pa http www compliance sony de Sony Corp vakuuttaa t ten ett t m laite on direktiivin 1999 5 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen Lis tietoja on seuraavassa Web sivustossa http www compliance sony de Herved erkl rer Sony Corp at dette utstyret er i overensstemmelse med vesentlige krav og andre relevante bestemmelser som fremg r av direktiv 1999 5 EC G til denne URL en for mer informasjon http www compliance sony de ME THN NAPOYZA H Sony Corp AHAQNEI OTI H ZYZKEYH ZYMMOPOONETAI NPO TIZ OYZIOAEIZ ATIAITHSEIS KAI TZ AOINE ZXETIKEZ AIATACEIS THE OAHTIA 1999 5 EK Pia Teploodtepec AEMITOHEPELEG TAPAKAGAOUHE va emuoke eite Thy napak tw nAeKtpovikr SteUBuvon URL http www complia
9. eiving performance becomes better 3 Select the radio frequency with the CHANNEL selector switch continue to next page 9 Sending RF signals from the transmitter The transmitter starts sending RF signals automatically when it detects an audio signal from the equipment connected If it does not detect an audio signal for more than about four minutes the transmitter will stop sending RF signals and the power indicator will turn off When the transmitter receives an audio signal again it starts sending the RF signals and the power indicator will light in red again If the audio signal is very weak the transmitter does not send RF signals If the transmitter is connected to a headphone jack make sure the volume of the equipment connected is set to 5 6 or higher You may not hear the beginning of the sound from the headphones until the transmitter starts sending the RF signals after detecting an audio signal The headphones automatically turn off when they are taken off Auto power on off function Do not pull up the self adjusting band when not in use as this will consume the battery power Notes e If hiss is heard move closer to the transmitter e You may hear some noise when you disconnect the AC power adaptor from the transmitter before taking off the headphones 10 Using the vibration function Set the VIBRATION switch to ON and adjust the level of vibration using the vibration volume Yo
10. is e outras provis es da directiva 1999 5 CE Para saber mais pormenores aceda ao seguinte URL http www compliance sony de http Awww sony net Printed in Malaysia
11. nce sony de Par la pr sente Sony Corp d clare que cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Pour de plus amples informations veuillez vous reporter a URL suivante http www compliance sony de 32 6352432 Hiermit erkl rt die Sony Corporation dass sich dieses Ger t in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999 5 EG befindet Erl uterungen dazu finden Sie unter folgendem URL http www compliance sony de Por medio de la presente Sony Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE Para obtener m s informaci n visite la direcci n URL siguiente http www compliance sony de WIDE Hierbij verklaart Sony Corp dat dit toestel in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG Ga naar de volgende URL voor meer informatie http www compliance sony de Italiano Con la presente Sony Corp dichiara che questo apparecchio conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE Per ulteriori informazioni accedere al seguente indirizzo URL http www compliance sony de A Sony Corp declara que este equipamento est conforme com os requisitos essencia
12. oubleshooting Problem Solution Nosound Turn on the transmitter first and then Muffled put on the headphones sound Check the connection of the audio video equipment or the AC power adaptor Check that the audio video equipment connected to the transmitter is turned on If the transmitter is connected to the headphones jack raise the volume of the audio video equipment connected to the transmitter Change the radio frequency with the CHANNEL selector on the transmitter then press the TUNE button again The mute function is activated Use the headphones near the transmitter The headphones power indicator light dims flashes or goes off e Charge the rechargeable batteries if the headphones batteries are weak or replace dry batteries with new ones If the power indicator is still off after charging the batteries take the headphones to a Sony dealer If you connect the transmitter to the LINE OUT or REC OUT jacks of an audio reproducer make sure that the NOISE FILTER switch is set to OFF Make sure that the NOISE FILTER switch is set to either ON or OFF If the switch gets stuck between ON and OFF the sound will be cut off Problem Solution Problem Solution Distortion If the transmitter is connected to the The batteries Check if the charging indicator light is headphones jack lower the volume of cannot be green If not put the head
13. phones batteries are weak or replace dry batteries with new ones If the power indicator is still off after charging the batteries take the headphones to a Sony dealer If you connect the transmitter to the LINE OUT or REC OUT jacks of an audio reproducer make sure that the NOISE FILTER switch is set to OFF 13 Specifications General Carrier frequency 863 5 864 5 MHz Ch1 Ch2 Ch3 FM stereo Channel Modulation Frequency response 18 22 000 Hz Transmitter TMR RF850R Power source DC 9 V supplied AC power adaptor Audio input phono jacks stereo mini jack Dimensions Approx 133 x 124 x 136 mm 51 4x5x53 sin w h d Mass Approx 195 g 7 oz Headphones MDR RF880R Power source Supplied rechargeable nickel metal hydride batteries BP HP550 or commercially available size AAA dry batteries Mass Approx 285 g 11 oz incl batteries 14 Supplied accessories AC power adaptor 1 Connecting cord approx 1m stereo mini plug x 1 gt phono plug x 2 1 Rechargeable nickel metal hydride batteries BP HP550 550 mAh 2 Unimatch plug adaptor stereo mini jack lt gt stereo phone plug 1 Operating instructions 1 Optional accessories e If sound is not output through the right channel when the supplied connecting cord is connected to the earphone jack Plug adaptor PC 236MS stereo mini jack monaural mini plug e If you have lost the supplied plug adaptor Plug ad
14. phones on the audio video equipment charged the transmitter correctly so that the connected to the transmitter charging indicator light is green Change the radio frequency with the Dry batteries are installed CHANNEL selector on the transmitter e Install the supplied rechargeable The headphones power indicator nickel metal hydride batteries light dims flashes or goes off Rechargeable batteries other than the e Charge the rechargeable batteries if supplied are installed the headphones batteries are weak e Install the supplied rechargeable or replace dry batteries with new nickel metal hydride batteries ones If the power indicator is still off after charging the batteries take the headphones to a Sony dealer If you connect the transmitter to the LINE OUT or REC OUT jacks of an audio reproducer make sure that the NOISE FILTER switch is set to OFF Loud If the vibration switch is ON you may background hear vibration noise This is not a noise malfunction Move closer to the transmitter As you move away from the transmitter more noise is likely to be heard If the transmitter is connected to the headphones jack raise the volume of the audio video equipment connected to the transmitter Change the radio frequency with the CHANNEL selector on the transmitter then press the TUNE button again The headphones power indicator light dims flashes or goes off e Charge the rechargeable batteries if the head
15. r Otherwise you will have to turn up the volume of the headphones and that may cause noise e When you connect the connecting cord directly to an earphone jack monaural mini jack the audio signal may not be output through the right channel In such a case use the separately sold PC 236MS plug adaptor stereo mini jack monaural mini plug between the connecting cord and the earphone jack 4 Put on the headphones The power indicator on the upper part of the right housing glows red Be sure gt Operating the system Se ee et Listen i ng toa to put the right housing R on your right ear and the left housing L on prog ramme your left ear Wear the headphones vertically on your head so that auto Before listening power on function is properly activated To prevent your ears from being damaged first lower the volume 1 Turn on the audio video equipment connected to the transmitter If the transmitter is connected to the headphone jack set the volume control of the audio source equipment as high as possible but not so high that the audio signal becomes distorted 5 turn up the volume to a moderate level with the VOL control 2 Remove the headphones from the transmitter Press the TUNE button briefly for The transmitter s power indicator will automatic tuning of the headphones light in red If you do not receive a clear audio signal press it again VOL control Follow steps 3 and 5 above until the rec
16. u can enjoy powerful bass sound when you listen to movies or games through the headphones Using SRS surround function Set the C switch to ON to reproduce a wide surround sound field through the headphones The effective areas of the transmitter The optimum distance is up to approximately 100 m 328 1 ft without the system picking up some interference However the distance may vary according to the surroundings and environment If the system picks up some noise while using it within the above mentioned distance reduce the distance between the transmitter unit and the headphones or select another channel Notes e When you use the headphones inside the effective areas of the transmitter the transmitter can be placed in any direction from the listener e Even within the signal reception area there are some spots dead spot where the RF signal can not be received This characteristics is inherent to RF signals and does not indicate malfunction By slightly moving the transmitter location of the dead spot can be changed Replacing the ear pads The ear pads are replaceable If the ear pads become dirty or worn out replace them as illustrated below The ear pad is not commercially available You can order replacements from the store where you purchased this system or at your nearest Sony dealer 1 Remove the old ear pad by pulling it out of the groove on the housing da 2 Place the new ear pad on the
17. urces For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product Welcome Thank you for purchasing the Sony MDR RF880RK Wireless Stereo Headphone System Before operating the unit please read this manual thoroughly and retain it for future reference Some features are e Wireless system that allows you to listen to a programme free from the restriction of a cord High fidelity sound reproduction e A compact transmitter with an AC power adaptor supplied enables simple charging of the headphone batteries Just by placing the headphones on the transmitter headphone batteries can be charged e Auto power on off function to automatically turn on the headphones when they are worn and turns them off when they are taken off e Self adjusting headband mechanism eliminating the need for headband adjustment Single VOL control adjusts both the right and left volume of the headphones Either rechargeable nickel metal hydride batteries supplied or commercially available size AAA dry batteries can be used to power the headphones Vibration function to vibrate the built in vibration motor by detecting low frequency approx 100 Hz and lower of audio signals SRS headphone surround function reproduces realistic surround sound through the headphones RSC is a trademark of SRS Labs Inc SR
18. urs required to fully charge empty batteries 3 Time stated above may vary depending on the temperature or conditions of use Using the headphones with dry batteries sold separately Commercially available size AAA dry batteries can also be used to power the headphones Install the batteries in the same manner as described in steps 1 through 3 of Charging the supplied rechargeable batteries When dry batteries are installed the battery charge function is not activated Battery life Battery Approx hours Sony alkaline battery 17 hours LRO3 AM 4 N tat 1 kHz 1 mW 1 mW output when the VIBRATION switch is set to OFF 2 Time stated above may vary depending on the temperature or conditions of use Notes on Batteries Do not charge a dry battery e Do not carry a dry battery together with coins or other metallic objects It can generate heat if the positive and negative terminals of the battery accidentally come into contact with metallic objects e If you are not going to use the unit for a long time remove the battery to avoid damage from battery leakage or corrosion Checking the remaining battery power Pull up the self adjusting band and check the power indicator located on the upper part of the right housing The batteries are still serviceable when the indicator lights in red Charge the rechargeable batteries or install new dry batteries if the power indicator light dims flashes or
Download Pdf Manuals
Related Search