Hytera DMR Conventional Series - HAM
Contents
1. Beacon network Tx Mode Allows user to set the Slave repeater s beacon Tx mode to network The beacon transmission duration and interval will be obtained from the master of the IP multi site system and be the same with the master If set the master repeater s beacon Tx mode to network the Beacon Tx Mode will be adjusted to Local The CPS path to configure this feature is via Conventional gt DMR Services gt Basic gt Beacon Tx Mode 2 2 2 New Features Repeater API Allows third party developers to develop PC applications base on the repeater API The differences between repeater and mobile API is as below For more information please contact your nearest sales to get more information on the Application Third Party Partnership Programme 1 Base on IP based connection allowing PC to place in different geographical location 2 Dual slot operation allowing developers to operate in both slot for network control 3 Monitoring capability allowing developers to perform voice recording on the whole network 4 Real time voice communication allowing real time voice conversion from radio network to IP network Respond amp Achieve Multiple key encryption Allows repeater to decode voice base on encryption key list With a repeater network where subscriber is using multiple encryption key in its grouping this feature shall allow better voice penetration The CPS path to configure this feature is via Conventi2. 3 DMR Services gt Basic gt Radio Disable Priority Interrupt Bluetooth Allows user to user Bluetooth for communication in covert radio Among the supported accessories are Bluetooth PTT and Bluetooth headset The CPS path to configure this feature is via 1 General Setting gt Menu gt Accessories gt BT 2 General Setting gt Buttons gt BT Respond amp Achieve Rental Allows a radio to be rented out to some parties There are 2 ways of calculating the total time to be rented which is either via GPS absolute timing in a GPS radio or from the total used time in a non GPS radio The CPS path to configure this feature is via Common gt Rent When the renting times up an audio and visual alert will be displayed to disable further radio usage Over the air radio config Allows over the air command sending to configure some radio s parameters which include add delete contact s list member add group call to contact s list modify transmit receive frequency modify color mode modify radio ID modify radio alias and add members to received talkgroup list For more information please contact your nearest sales to get more information from the application note The CPS path to configure this feature is via DMR Services gt Basic gt Over The Air Decode Please note the commands sending is only supported from the third party PC application Work order management Allows third party to st
3. management has been improved in this release version too The CPS path to configure option board enable disable is via Channel gt Digital Channel gt Option Board Option Board pass through mode Allows third party partners to send option board s firmware via PC USB to the option board installed in radio For more information please contact your nearest sales to get more information on the Application Third Party Partnership Programme Priority scan alert On Off Allows radio user to turn On Off the priority scan alert The CPS path to configure this feature is via General Setting gt UI Indication gt Tone Alerts gt Scan Priority Channel Tone Respond amp Achieve 5 tone features enhancement Allows user to configure 5 tone features enhancement of emergency call stun unstun silent interrogate and ACK1 Ringing The CPS path to configure this feature is via 5 Tone Services gt Decode Definition gt Decode Definition Analog emergency enhancement with 5 tone telegram Allows user to send a 5 tone telegram when an analog emergency is triggered The telegram shall allow the receiving radio to be able to know the emergency initiator s call ID The CPS path to configure this feature is via Emergency gt Analog Emergency gt Emergency ID Type Emergency Telegram Battery life enhancement Allows user to enjoy longer battery life with the optimization in this latest firmware release Table below list
4. ARC 40 bits encryption key AES 128 bits 256 bits encryption key The CPS path to configure this feature is via DMR Services gt Encrypt gt Encrypt key length Channel gt Digital Channel gt Encrypt For more information please contact your nearest sales to get more information as DMRA enhanced encryption is a chargeable feature with license control Encryption Option Board API Allows third party partner to develop digital encryption option board base on the latest encryption API addition The API scope only covers for digital encryption The CPS path to configure this feature is via Channel gt Digital Channel gt Option Board For more information please contact your nearest sales to get more information on the Application Third Party Partnership Programme Respond amp Achieve Encryption key length control Due to the various import export regulation control in different country the latest release of the firmware has been enhanced with encryption key length control before manufactured This encryption key length control has been pre set before radios are shipped from factory and not modifiable right after radio shipped The control is model number specific which is the third bit in the features range as highlighted as red below PD780 00000000 MBO0000 U1 0 F The definition of the bit is as below 1 When the bit is set to 0 the maximum length of the encryption key is 256 bits 2 When the bit is set to 1 the m
5. Notes for this Release sse nnne 18 3 A SUDSCRIDEM EE EE 18 3 1 1 SoftWare eer enter estne e tenete resiste restes estes sereni ens 18 311 2 Fe 66 ESTE REP 19 3 2 PILuJ 19 3 2 1 EA 19 3 2 2 HatdWare cnini retine tit eir eas 19 baec AE E ESEA AEE O AEE EAEE 20 331 teats 20 2 lt 4 550 cL E E 20 4 186 66 21 41 165465 21 4 2 Resolved Critical Issues from Previous 21 1 Product Versions Hytera Respond amp Achieve Subscriber A5 00 15 001 S5 00 15 001 Repeater A5 00 10 005 i 55 00 10 005 CPS V5 00 09 006 RDAG V5 00 06 000 Tuner V5 00 04 001 Respond amp Achieve 2 What s New in Release 2 1 What s New in Subscriber Release R5 0 2 1 1 New Enhancements All Call talkback in private mode Allows user to make a Private Call to a receive All Call The CPS path to configure this feature is via DMR Services gt Ba
6. amp Achieve 4 1 Issues Overview This sections details critical issues in R4 5 that has been fixed in R5 0 software release Critical issues are issues that once arise might incur serious impact to the user 4 2 Resolved Critical Issues from Previous Release No Product Description 13043 Subscriber When the scan initiated channel s transmit contact name has been set to none and scan talkback is disabled radio will transmit with wrong transmit contact name if PTT is pressed 10883 Subscriber During roaming if emergency is exited followed by roaming exit the emergency system will be faulty Instead of using the master site associated emergency system now the radio has used the emergency system for the roam initiated channel Please note that Return to selected channel is disabled in CPS for this case 11012 Subscriber If Triggered Location Reporting Request has been received before radio entering emergency followed by Emergency Location Report Stop Request during emergency state radio will stop sending location report after emergency has exited as the Emergency Location Report Stop Request command has reset the whole radio location report activity 11054 Subscriber In direct mode If one slot is occupied Telemetry cannot work under pseudo trunk 14318 Subscriber If the external speaker has been connected via the back mobile port followed by smart accessory f
7. art some integration with the beta version of work order management This is only meant for early integration for third party and it has not reached a final version This is to be further optimized and finalized in R5 5 release Persian Menu Allows user to be able to select Persian in its menu display User need to ensure Persian language pack is loaded into the radio for this to take effective For more information please contact your nearest sales to get more information on the various region language pack T9 Text Input Allows user to configure up to 6 new T9 text input of traditional Chinese German France Spanish Russia and Persian language User can customize the text input as according to the language pack in it s region For more information please contact your nearest sales to get more information on the various region language pack Respond amp Achieve 2 2 What s New in Repeater Release R5 0 2 2 1 New Enhancements Multi Tone decode in mixed mode Allows repeater to scan multiple CTC CDC even when operate in mixed mode The CPS path to configure this feature is via Conventional gt Channel gt Mixed Channel gt Multi CDC CTC Talkback enhancement in repeater access management Allows user to talkback to any call it is active with without restricted to the multisite access management list This shall enhance user experience to allow anyone to talkback in IP Multi site network for the received call
8. aximum length of the encryption key is 40 bits 3 When the bit is set to 2 the encryption is totally disabled Please note that this setting has to be non zero value in order for chargeable feature of Basic and Enhanced Encryption license control to be applied Loudness and quality optimizer LQO Allows user to enhance the listening experience by automatic frequency response adjustment in noisy quiet environment LQO is Hytera s patent which automatically optimize the audio high frequency response and volume level in noisy environment This enhances user experience as user do not need to change the volume level frequently when in noisy and non noisy environment The CPS path to configure this feature is via Common gt UI Setting gt LQO User can also On Off this feature via the Radio Setting menu Audio feedback suppressors Allows user to enhance the listening experience when talk in near distance This feature automatically adjusts the received signal s audio amplitude to improve the echo feedback when both party are talking near to each other This is only supported in digital mode The CPS path to configure this feature is via Common Microphone VOX Audio Feedback Suppressors Speaker Equalizer Allows user to enhance the listening experience in covert radio model by improving the audio response in low and high frequency audio range This is a covert radio model specific feature for covert s speaker performance o
9. d when keypad locked is On The CPS path to configure this feature is via Common gt UI Setting gt Select Button Lock gt Volume Knob Respond amp Achieve ATEX radio speaker s amplitude control Allows user to limit the amplitude s of the speaker data for security measure in an explosive environment The CPS path to configure this feature is via Common gt UI Setting gt Output Audio Limiter Man down trigger enhancement Allows user to trigger the man down from the 3 options of Tilt Only No Movement Only Tilt Or No Movement The tilt angle are configurable with 30 45 and 60 degree the degree is measured from the horizontal land axis to the radio axis The CPS path to configure this feature is via Common gt Accessories gt Man Down gt Trig Tilt Gradient gt Man Down Trigger Method Refinement to the internal external mic VOX gain level Allows user to configure the internal external mic VOX gain level from an old level of 1 5 to new latest level of 1 9 The CPS path to configure this feature is via Common gt Microphone VOX gt VOX gt internal external mic VOX gain level Option Board enhancement Icon of is used to indicate an option board is installed and initialized successfully with radio In earlier firmware release the icon only shown for encryption option board and now is it spread for all option board Besides the icon enhancement the option board and radio interaction
10. ed the battery life improvement that is carried out on a PD780 radio with battery capacity of 2000mAh with the measurement method of transmit receive idle 5 5 90 duration Analog High Analog Low Digital High Digital Low Power Power Power Power Chr Chr Chr Chr 0 29 hr 0 45 hr 0 47 hr 0 61 hr 0 32 hr 0 51 hr 0 52 hr 0 69 hr Respond amp Achieve 2 1 2 New Features Remote Monitor feature license control Remote Monitor has been upgraded to a chargeable feature that need a feature license to operate By default it is given for free Only restricted region that does not allow remote monitor to be used it need to reapply to disabled it The CPS path to enable this feature is via Common gt Feature Control gt Remote Monitor For more information please contact your nearest sales support to get more information Analog mode only feature license control A new chargeable feature of pure Analog mode has been added to this latest release The CPS path to enable this feature is via Common gt Feature Control gt Conventional Analog Mode For more information please contact your nearest sales support to get more information DMRA enhanced encryption Allows user to enable the DMRA enhanced encryption which is an encryption logic defined by DMR association thus ensuring compatibity in encryption voice communication between different DMR manufacturers This feature is supported with
11. h to enable the menu display is via General Setting gt Menu gt Programming Preset channel programmable button Allows user to move to a preset channel from a programmable button press The CPS path to configure this feature is via 1 General Setting gt Buttons gt Preset Channel 1 4 2 General Setting gt Setting gt Preset Channel to set the Zone Channel One Touch on keypad Allows user to trigger one touch call on keypad 0 9 and This is only supported when radio is in home screen it is automatically disabled when radio in menu or dialing screen The CPS path to configure this feature is via 1 General Setting gt Buttons gt Default Numeric Key Selection gt One Touch Call 2 General Setting gt One Touch Call gt Numeric keypad Channel change voice notification customization Allows user to customize its own channel change voice notification There is some guideline as listed below 1 Only audio clips with wav file format is supported and the total file size shall not exceed 512KB 2 APC tools is needed for the conversion of the wav file to the radio s loadable image Please refer to the Voice Conversion Tool User Guide for more details The CPS path to configure this feature is via General Setting gt UI Indication gt Channel Notify For more information please contact your nearest sales to get more Respond amp Achieve information on the audio conversion from the u
12. ich support Glonass GPS is available soon for sales gt This is a new radio model with the Russia s Glonass GPS module Please note that this is only hardware specific changes as all the rest of GPS application in radio remain the same as the Sirf GPS module 5 The U5 MD780 is available soon for sales For more information please contact your nearest sales support to get more information 3 2 Repeater 3 2 1 Software N A 3 2 2 Hardware V U1 portable repeater RD960 is available soon for sales For more information please contact your nearest sales Respond amp Achieve 3 3 Tools 3 3 1 Software Please note The CPS and tuner support 64 bit OS are released in this version 3 4 Accessories 1 The Bluetooth accessories support covert radio is available soon for sales 2 The Bluetooth earpiece EAN19 only support covert radio is available soon for sales Wired earpiece model name of EAN19 Allows a covert radio user to to have an optional accessory of wired earpiece This wired earpiece have 3 programmable buttons that can have the associated features configure from the radio CPS For more information please contact your nearest sales to get more information on the accessory The CPS path to configure this feature is via General Setting gt Buttons gt Accessory P1 P3 Short Long For more information please contact your nearest sales support to get more information 4 Issues Respond
13. munication interoperable is needed 2 Anew enhance logic has been enhanced to the Hytera enhanced encryption for 128 and 256 bits key length for better security control This cause incompatibility for R5 0 and R4 5 release for enhanced encryption of above key length As such it is recommended for users to upgrade the old radios to latest R5 0 if voice communication interoperable is needed 3 With the new features of DMRA enhanced encryption in R5 0 this ensure voice data compatibility with other manufacturer who are also compliance to this standard as defined by DMR association 4 Anew PC USB driver has been released together with R5 0 Some of the USB user guideline as below 1 Forusers who has been using Digital USB version V2 0 it is recommended for them to remain untouch to the old USB drivers for all radio programming 2 For third party PC partners who has been using Digital USB version V3 0 it is recommended for them to remain untouch for a 32 bits PC OS platform and upgrade to latest Digital USB version V5 0 for a 64 bits PC OS platform 3 For users who are new and using 64 bits PC OS platform it is recommended to install directly with the latest Digital USB version V5 0 Respond amp Achieve 3 1 2 Hardware PD700 Business is available soon for sales The covert radio model with display X1p is available soon for sales Support the digital encryption option board and release the common option board The radio wh
14. nsmit contact name beacon signal configuration etc This shall allow the network administrator s a better control of the whole network Please contact your nearest sales support to get a copy of Hytera s IP Multi site Connect Application note RDAC user guide or RDAC help file for more details 2 3 2 New Features Contact list sorting via CPS Allows user to enable disable the contact list sorting When enabled contact list will be alphanumeric sorted When disabled the contact list will be sorted according to the order it is entered in CPS sequentially The CPS path to configure this feature is via Option gt Preferences gt DMR Contact List Sort Bluetooth pairing via CPS Allows user to perform Bluetooth accessory pairing with radio via CPS Encryption KeyLoader Allows user to perform encryption key management with higher security This tool need to be used together with a USB hardware dongle which is also one of the important authentication For more information please contact your nearest sales to get more information on this new security tool and respective user guide Respond amp Achieve 3 Important Notes for this Release 3 1 Subscriber 3 1 1 Software 1 Anew SELP vocoder has been enhanced in this latest release The latest SELP version has an enhanced audio quality However it is incompatible with R4 5 release As such it is recommended for users to upgrade the old radios to latest R5 0 if voice com
15. onal gt Channel gt Digital Channel gt 5101 multi key Decrypt Slot2 multi key Decrypt Front panel programmable buttons support Allows user to configure some features to the repeater s front programmable buttons Among the supported features are Supported feature list Supported feature list Tx enable disable Slot1 encrypt on off Minor alarm on off Slot2 encrypt on off Adjust power level Slot1 audio output on off Adjust squelch level Slot audio output on off Multi CTC CDC on off Pre emphasis on off Reset Repeater base station mode Monitor on off Repeater knockdown Keypad lock unlock Analog speaker on off Scramble on off Major alarm on off Buffer management Please refer to subscriber section for more information on this feature Both repeater and mobile adheres to the same design logic DMRA encryption Please refer to subscriber section for more information on this feature Respond amp Achieve 2 3 What s New in Tools Release R5 0 2 3 1 New Enhancements RDAC enhancement with diagnostic and control RDAC has been enhanced with few capabilities as below 1 Enhance RDAC layout topology for better clarity of a network grouping This shall allow the network administrator s a better control of network management 2 Enhance RDAC with battery management for RD960 backpack repeater 3 Enhance with more configuration via network which include contact list tra
16. physical IP network card can not communications with external it will cause the repeater can not send out data 11309 Repeater When the local access management ID beyond 65536 The Radio which radio ID is in the range of allowed radios can not access the repeater As SW releases of Repeater R4 6 is only released to limited users only so it is mentioned here as the same scope has been automatically integrated to R5 0 too This applied for TD 11968 and 12603
17. ptimization The CPS path to configure this feature is via Common gt UI setting gt SPK Equalizer Always Treble Boost Allows user to enhance the listening experience by enhancing the audio high frequency response Compared to LQO it is not automatic and once enabled the logic will be Respond amp Achieve activated in all receiving audio The CPS path to configure this feature is via Common gt UI Setting gt Microphone VOX gt Always Treble Boost Buffer Management Allows third party developers to continually send few control messages to mobile radio for execution as the mobile has been enhanced with the message queue management This shall enhance the PC processing efficiency as PC application no longer need wait till a control message is processed before the subsequent control can be sent There is priority associated with each message to mobile For more information please contact your nearest sales to get more information on the Application Third Party Partnership Programme and the Application Development Kit for full documentations on the enhancement above New version of SELP vocoder Anew SELP vocoder has been enhanced in this latest release The latest SELP version has an enhanced audio quality However it is incompatible with R4 5 release As such it is recommended for users to upgrade the old radios to latest R5 0 if voice communication interoperable is needed Priority scan Allows radio to con
18. rom the front panel port the smart accessory detection will become invalid and need to recover by reattachment of the smart accessory 11909 Repeater If CWID mixed mode timer is enabled CWID transmission will be terminated abruptly when the voice repeating ends The remaining CWID samples will only be transmitted in next CWID transmission 11921 Repeater When flat audio is enabled the audio from the repeater back port will not be streamed out 1112424 Repeater The CWID transmit interval will become inaccurate when it is set bigger than 600 s 1112425 Repeater In a busy IP network due to data lost instead of repeating with silent samples sometimes it is repeating with old audio samples 11708 Repeater When repeater IP Multi site Connect is set to slot 1 only slot 2 can Respond amp Achieve also broadcast the activity from the IP line that is received from other repeaters over the network 11908 Repeater The beacon transmission which is supposed to be operated in local repeater has been streamed out via IP network to others repeaters causing un necessary beacon transmission at other repeaters too 11918 Repeater When master is dropped from the IP line and reconnected back all the slaves re registration when the master first comes back online will sometimes cause the master to reset if the slaves amount is huge 11968 Repeater The
19. ry Allows user to trigger GPS message sending via telemetry whenever there is a voltage changes in a predefined IO The CPS path to configure this is via General Setting gt Telemetry gt Telemetry VIO gt Send Status w GPS Message RRS and GPS sending in radio disable state Allows radio to continue sending the RRS and GPS message when radio is disabled In earlier firmware release the RRS and GPS sending will be suspended when radio is disabled Pre defined GPS RRS revert channel when in pseudo trunk mode Allows user to configure a dedicated transmit channel for GPS RRS sending when radio operates in pseudo trunk mode This feature shall be configured base on the real topology at customer side when dispatcher is deployed The CPS path to configure this feature is via Channel gt Digital Channel gt Tx gt GPS Revert Channel RRS Revert Channel RRS revert Allows user to perform RRS on a pre defined revert channel In earlier firmware release the RRS sending can only be supported in current channel The CPS path to configure this feature is via Channel gt Digital Channel gt Tx gt RRS Revert Channel Individual tone volume control Allows user to configure the tone volume in tone level for many of the radio s tones The CPS path to configure this feature is via General Setting gt UI Indication Inclusion of volume knob when keypad is locked Allows user to include the volume knob to be locke
20. s document may be copied modified translated or distributed in any manner without the express written permission of us If you have any suggestions or would like to learn more details please visit our website at http www hytera com Hytera Respond amp Achieve Revision History mm emm Tem er sees mene pem mee s een memes en eere nemo W Hytera Respond amp Achieve Contents 1 Product Verslofis ae dea aaa EEE fno E AGE ENEA E REEE 4 2 Whats New iri Release teet x a a R 5 2 1 What s New in Subscriber Release R5 0 eeeeeeeeeeeeeeee eene nnne nennen nnne nnn 5 2 1 1 New Enhancements Io 5 2 1 2 New Fealures rrt oerte eee ore e PREDA 9 2 2 What s New Repeater Release 5 02 15 2 2 1 New 2080000 6 15 2 2 2 tere reete e tee 15 2 3 What s New in Tools Release 5 0 4 0000 000 0 17 2 3 1 New 2 44400080000 6 17 2 32 17 Important
21. ser guide Covert mode Allows the radio to totally turn off all visual and audio indication once this feature is activated Accessory audio and USB communication with radio remains active during this mode The CPS path to configure this feature is via 1 Common gt UI Setting gt Covert Mode 2 General Setting gt Buttons gt Covert mode For a displayed radio this feature can also be triggered from the radio menu The menu can be turned On via General Setting gt Menu gt Covert Mode All Call Priority Interrupt Allows a all call initiator to preempt an existing call to make way for the all call The call preemption can be made to any active voice call This feature shall only be supported in a pseudo trunk channel The CPS path to configure this feature is via 1 Channel gt Digital Channel gt Slot Operation gt Pseudo Trunk 2 Channel gt Digital Channel gt Priority Interrupt Encode Decode 3 DMR Services gt Basic gt All Call Priority Interrupt Radio disable priority interrupt Allows a radio disable initiator to preempt an existing call to make way for the all call The call preemption can be made to any active voice call This feature shall only be supported in a pseudo trunk channel The CPS path to configure this feature is via 1 Channel gt Digital Channel gt Slot Operation gt Pseudo Trunk 2 Channel gt Digital Channel gt Priority Interrupt Encode Decode
22. sic gt All Call Talkback in Private Mode When this is enabled user can initiate the private call talkback via the missed call list in the menu Call alert from contact list Allows user to associate call alert to a member in the contact list When this configuration is set a PTT in contact list for this member list will initiate a call alert instead of a voice call The CPS path to configure this feature is via DMR Services gt Contacts gt Call Type gt Alert call Caller ID display This is a digital specific feature where the caller identification either in ID or alias are automatically display during the call hang time of the receiving radio This is only supported in radio model with display GPS revert during a call Allows user to configure GPS revert during a call session include call receiving and call hang time When this is not enabled GPS revert only takes effective when the radio is idle The CPS path to configure this feature is via DMR Services gt Basic gt In Call GPS Revert GPS trigger enhancement Allows user to trigger GPS sending not only via fixed interval interval is notify via radio dispatcher but also from distance time and also programmable button toggle This is supported both in third party API and also via CPS The CPS path to configure this feature is via General Setting gt Accessories gt GPS Trigger Respond amp Achieve GPS text message sending via telemet
23. tinue scan of the priority channels during call receiving The interval of the priority scan during a call is configurable in CPS The CPS path to configure this feature is via Scan gt Scan List 1 gt Priority Channel 1 Priority Channel 2 Priority Sweep Time Roaming follow full channel profile of master site Allows the radio to fully follow the full channel parameters when a home site is selected during roaming When this feature is disabled instead of the full channel parameters only 7 parameters in the full channel are selected which is listed below Transmit frequency Receive frequency Color code Slot Talkaround setting GPS Revert Channel Emergency system Include emergency revert channel gt The CPS path to configure this feature is via Roam gt Roam List 1 gt Follow All Master Site Config Respond amp Achieve Vox microphone s data select Allows user to preset the microphone data source for VOX processing The CPS path to configure this feature is via Common gt Microphone VOX gt VOX MIC Selection Slot indication via GPIO Allows user to preset an active level in GPIO to have slot 1 2 indication This is a mobile only feature The CPS path to configure this feature is via General Setting gt Accessories gt Slot 1 2 indication Front panel radio programming Allows user to modify the radio s frequency slot and color code from the radio menu The CPS pat
24. y n 5 Hytera Hytera DMR Conventional Series Release Notes DMR Conventional Software Release Version 5 00 Release Notes Document Version 5 00 01 Software Release Date 28 Nov 2012 Date 2012 11 28 Respond amp Achieve Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Co Ltd the Company in PRC and or other countries or areas The Company retains the ownership of its trademarks and product names All other trademarks and or product names that may be used in this document are properties of their respective owners The product described in this document may include the Company s computer programs stored in memory or other media Laws in PRC and or other countries or areas protect the exclusive rights of the Company with respect to its computer programs The purchase of this product shall not be deemed to grant either directly or by implication any rights to the purchaser regarding the Company s computer programs Any of the Company s computer programs may not be copied modified distributed decompiled or reverse engineered in any manner without the prior written consent of the Company Disclaimer The Company endeavors to achieve the accuracy and completeness of this document but no warranty of accuracy or reliability is given All the specifications and designs are subject to change without notice due to continuous technology development No part of thi
Download Pdf Manuals
Related Search