User Manual - intellisat
Contents
1. gt Enter value with 1 0 Press OK to confirm Tone Burst or DiSEqC Use V A to assign the LNB to the input for the Tone Burst A B or DiSEqC switch A D Press OK to confirm e Repeat the setting for all satellites SAT System 2 etc e To return to the previous menu press the Z button e To finish your setting press MENU 18 5 7 Reception of signals from encoded satellite channels This digital recorder has a common interface Cl slot It allows you to connect a Cl module for various encryption systems and broadcasting stations Encoded channels can only be viewed with a Cl module suitable for the encoding system and the corre sponding smart card The smart card has all the functions for authorization decoding and subscription Note Follow the operating instructions of the corresponding manufacturer for the Cl module e Insert the smart card into the Cl module in such a way that the chip on the smart card faces the thicker side top of the Cl module 1 e Rotate Cl module with inserted smart card 180 around the longitudinal axis bottom facing upwards see illustration op posite e Insert the Cl module with the bottom facing upwards into the common interface slot CI MODULE 2 e Use V A in the main menu to select Cl Module and press a OK to confirm ee A menu generated by the Cl module appears on the Ann screen For information on how to use the Cl modu2. Satellite antennas l Satellites Information on reception 40 SAT mouse inset picture 33 Scart cable seen Screen format L Sleep timer ie L 14 Smartcard IS ee Software update Large SCrEEN nn 33 Station search Lead fie eaa 31 Siere sounda a 7 Limiting the volume 37 Summertime Lists of favourites 20 Svetem setin pi en LNB power supply 17 y ea Local time 1 M Main menu Mains adapter Main menu Menu information 13 Timer eating ys Menu language 14 x Movi X 21 Time shift Bu De A eit Time shift recording es Multi channel amplifier 2 ander data Multi channel sound 22 PES anne 9 y dat 38 Operating software 38 Be ee Optical connection 7 y p Pause an nenne nee Picture quality PIN an seit Playback eessen Polarisation Power consumption Y Preset AV channel 23 Y en 15 R Z Radio station 27 Topping anne 24 Range of accessories 5 Remote control 8 Remote control level 9 Removing the menu block 37 E e A ee 15 1 1 1 2 1 3 1 4 General information Package contents e PRS 1080 Cl with 80 Gbyte hard disk e SAT mouse infrared receiver e Remote control incl 2 batte
3. Locked channels are marked with a key Sin RTE ORN e Confirm the channel lock with MENU O Protect List Back oD L 2 0 Z Lu 6 5 7 1 7 2 7 3 Undoing the channel lock e Select the locked channel in the channel list with TV R and Va e Press the blue button Input Password appears e Enter the password with 1 0 Confirm the undo channel lock action with MENU Basic functions Adjusting the volume Notes You cannot adjust the volume in menu mode The changes in volume refer to the level of the audio sig nals at the TV output socket of the recorder Use gt to set the volume A volume scale is displayed on the screen Muting e Muting press the button X on the remote control e To end muting press the button f Selecting channels numerical preset channel selection e Enter single digit or multi digit preset channel numbers by pressing 1 0 on the remote control e Switch preset channels up and down one by one press V A as often as required e To scroll quickly through preset channels press W amp and hold as long as is necessary Note After each change of channel a short screen text is dis played with the following information Preset channel number Name of the channel Time Title and start time of the current programme and the fol lowing programme Information on the audio signal of the current channel Used
4. e Press the red record button repeatedly to set the length of the recording in steps of 30 minutes from 00 30 06 00 hours Ending the recording e To stop the recording press the red button for approx 3 seconds 16 00 6 9 Record stopped a Time shift recording You are watching a programme you are interrupted and wish to continue to watch the programme from the time of interruption e Press the Pause button Ill The picture on the screen is frozen freeze frame 16 00 6 3 16 00 cD Il Pause Ca gt Beccary 00 00 02 Tagesschau Tagesschau e To start playing the time shift recording at this point press Pause Ill or Playback gt Note Press the button for fast forward P gt Once the end of the time shift recording is reached the programme is played e To end the delayed recording press the red button for ap prox 3 seconds Recording with the timer You can find more information on programming recordings with the timer in the chapter Timer functions page 29 11 2 Playback You have the following playback options Time shift see chapter Time shift recording Playback of saved programmes while another programme is being recorded Archives Interference free freeze frame Fast forward and reverse in 5 stages with picture Playback from the Archives You can play stored programmes from the Archives even while you are rec
5. Stop Displays channel information stereo lects menu items Switches to remote control level SAT 2 Fast forward opens the text editor in the Ar Displays and hides Archives o e Inserting batteries in the remote control e Open the battery compartment and remove the lid e Insert the batteries Mignon e g UM 3 or AA 2 x 1 5 V Observe the polarity marked in the battery compartment base e Close the battery compartment Notes If the digital recorder no longer reacts properly to remote control commands or if the message Low Battery ap pears we recommend that the batteries are changed Always remove used batteries The manufacturer accepts no liability for damage result ing from leaking batteries The first time you use the digital recorder after changing batteries the message Low Battery appears Ignore this message Environmental note Do not throw away used batteries with your normal household waste Instead take them to a battery collection box in a shop or a public collection point Selecting remote control level SAT 1 or SAT 2 If you wish to use an RCR 100 remote control to operate two PRS 1080 CI digital recorders you must select a different re mote control level for one of the two digital recorders TV Setup Connect the device and switch it on RGB see chapters 4 and 5 pages 10 19 nme e Press MENU to open the main menu Ws u Telete
6. Use V A to select Teletext and press OK to confirm Use V A e g for Germany to select West and press OK to confirm To return to the previous menu press the Z button To finish your setting press MENU Cinch audio output level TV Setup wm Re Auto wss on Teletext West Rel Cinch Audio Adjustable a o Select Back This menu is for determining whether the cinch socket output level is to be controlled via remote control or fixed Use V A in the main menu to select System Setup and press OK to confirm Select TV Setup with V A and press OK Use V A to select Cinch Audio and press OK to confirm Use V A to select Fixed or Adjustable and press OK to confirm e To return to the previous menu press the Z button e To finish your setting press MENU 16 5 6 Adjusting the digital recorder to the satellite antenna This digital recorder was factory set so that it is ready for operation with most satellite an tennas and LNB configurations Changes in this menu have a direct effect on the reception characteristics of the digital recorder and should therefore only be made by an expert System Setup u ns e Select System Setup in the main menu with V A and Ar TE press OK to confirm 2 Langues Time e Select LNB Settings in the System Setup menu with V A and press OK to confirm un The LNB Settings menu appears Gss
7. Recorder volume is set too low Set higher volume Display Satellite antenna not installed Install satellite antenna correctly No reception correctly Satellite cable damaged Replace satellite cable Incorrect settings in the LNB Set the menu correctly system menu Remote control The batteries are inserted incor Insert batteries correctly does not work rectly Make sure the polarity is cor rect The batteries are flat Insert new batteries The remote control is not di Point the remote control at the rected at the infrared sensor of infrared sensor the SAT mouse Incorrect SAT level selected The time is not displayed Deviation from local time Correct the deviation offset correctly Interference of picture The interference may be caused Move any DECT wireless tel from stations with a by DECT wireless telephones ephones away from the range frequency of approx near the recorder of the recorder 12480 MHz Digital recorder makes Fan is starting up The fan quietens down as noises on being soon as the required speed is switched on attained The device asks you to Channel or menu are locked Input your password PIN or if input your PIN necessary contact your dealer Subject to modifications Technical data subject to change ADE 43 nderungen vorbehalten Technische Angaben ohne Gew hr Alterations reserved Technical data E amp O E by GSS GmbH 13012006
8. password 37 12 3 Restoring the factory settings ucnsecnseessseseensneenneennnee nennen nenne nenne 38 12 4 Updating SWAER dn einher ran 38 12 5 Deleting channe l lists svc aus ne ans nee ee anne 39 L ee re 40 E 13 1 Displaying information on reception of channels s src eeren 40 13 2 Querying device information sessies es eieiei a EE E eik 40 Z 18 3 Technical data een en are lan rannte Al 13 4 Warantysnaee endeten Al 13 5 Troubleshooting entire ernten 42 Index A Application of data 29 Archives daissan 8 Backward eee Batteries Batteries low Beginning of the recording 30 Blocking channels Blocking the menu C Change channel name 18 Channel lists Cinch output level Climod le u 4 0 Cinch sockets 00000 22 00 Common interface Condition on delivery 38 ENBS nn ians 15 D Degree of longitude 14 Deleting channel lists 39 Device information DVB receivers n ee E Electronic programme guidene 28 Encoded channels 19 End of the recording 30 Entering letters 23 Environmental note 6 EPG ine 28 EUro AV seine 15 Euro AV cable 11 F F connector osi itaas Fast forward Fast rewind E G S GNT AA ee 14 Satellite antenna
9. Fr Friday Sa Saturday Su Sunday Mo Fr Monday to Friday Mo Sa Monday to Saturday Mo Su Monday to Sunday e Press lt P to move the cursor on Prog use V A to activate the desired channel list TV radio list of favourites Move the cursor on with and use W A or 0 9 to select the preset channel The channel name is displayed in the menu e Use to move the cursor on Start Stop and use W A or 0 9 to set the beginning of the recording or the end of the recording e Make your entries and press OK to confirm Example TV 0012 17 15 18 00 ain ODDS ae 0 00 Timer 2 The device records from channel no 0012 from the TV chan nel list every Monday from 17 15 18 00 e To delete entries of an active timer white background press the red button e To return to previous menu press the Z button e To finish your setting press MENU The digital recorder records the specified programme at the set time 130 10 4 Setting lead time follow up time options Options 00 Min Follow up time 10 Min o Select eo Back 10 5 Ending the active timer 10 6 Deleting a timer position This menu enables the individual shifting of the actual switch on and switch off times in both directions lead time and follow up time regardless of the preset switch on and switch off times To activate the function Options in the Timer menu press the blue button
10. To return to previous menu press the Z button To finish your setting press MENU 12 4 Updating software The software for the digital recorder is provided by the Astra 19 2 East satellite The digital recorder is designed so that you can update its operating software and certain channel information directly using this satellite Main Menu e Select Software Update in the main menu with V A and 1 press OK to confirm amp Ales The digital recorder starts the search for new operating software and then checks whether the software used in the digital recorder needs to be updated Gss This process may take several minutes Please wait until the search is finished The information received on the available files and versions is displayed Software Update in the Software Update menu New Version e g Modell PRS 1080 CI 10 or up to date New Version up to date O o Select 8 A Back e Ifa New Version is displayed e g 10 press OK to start the software update Display shows Search 15 min A thin yellow bar displays the progress of scan and download A wide yellow bar displays the status of the updates Note You can cancel the download at any time with OK or Z An interruption during the downloading process for exam ple by pulling out the mains plug can damage the operat ing software of the digital recorder 2 930 After updating t
11. Use W to select Lead time or Follow up time and use 4 P to set the forward or backward time O 60 minutes To return to previous menu press the Z button e To finish your setting press MENU Once the timer starts a recording the selection of channels is locked To prematurely stop the timer recording press the red but ton for approx 3 seconds e Use V A to select the timer position to be deleted Press the red button a B L 2 0 Z LJ 11 Recording playback functions The technology used for this digital recorder enables the simultaneous recording of a SAT programme and playing of a recorded programme This procedure is used for the time shift Time shift means that you can record a programme and start to play it from the begin ning e g delayed in time by 30 minutes while it is still being recorded Another option for using the time shift is e g the following situation You are watching a film and the telephone rings You now switch on time shift and when you come back you can continue to watch the film from where you were inter rupted 11 1 Recording The saved programmes are stored in the Archives Recording a live programme You wish to record a programme that is just live on TV e Press the red record button 16 00 e9 16 00 e Record Tagesschau Setting the recording time e Press the red record button again 16 00 co Duration 01 30
12. o Select 8 20 Back a c L ae 0 Z LJ e Use to place the cursor under e Press OK to confirm the number to be changed gt Enter value with 1 0 e To return to the previous menu press the Z button e To finish your setting press MENU Receiving signals from two or more satellites e Select LNB System in the LNB Settings menu with W A and press OK to confirm e Use V A to select Tone Burst for 2 satellites or DiSEqC 1 0 for up to 4 satellites and press OK to confirm e Select SAT System 1 with W and press OK to confirm e Use V A to select the item to be changed and press OK to LNB Settings SAT System 1 amp 950 Select Back SAT System 1 Nm an Low High Band OscillatorLow 09750 MHz Oscillator High 10600 MHz Tone Burst A o Select 9g go Back confirm Name Change satellite name LNB Type Oscillator Low Oscillator High Use lt P to place the cursor under the letter to be changed Use V A to set letters Press OK to confirm Use V A to select the LNB that is used Press OK to confirm Set the oscillator frequency Low band Use lt P to place the cursor under the number to be changed gt Enter value with 1 0 Press OK to confirm Set the oscillator frequency High band Use lt P to place the cursor under the number to be changed
13. symbols OO Digital multi channel sound GD Stereo sound OO Dual sound O Mono sound 1 2 For example 2 languages are transmitted language 1 is selected eng The selected language is e g English 22 7 4 Preset AV channel As soon as the set connected to the socket RECORDER is activated and provides a switching voltage the Digital Re corder switches to AV operation e To select a preset AV channel manually press the O button The device switches to the external signal at the RECORDER input e To switch back to TV mode press the O button again 7 5 Selecting channels from the TV radio channel lists You can choose between the channel lists TV TV channels RA radio channels and 4 lists of favourites Lists of favourites without channels are not displayed e Select the desired channel list with TV R e Use V A and lt 4 P to select a channel and press OK to open 7 6 Selecting channels from the list e Open the channel list with OK e Use V A and lt 4 P to select a channel and press OK to open 7 7 Alphanumerical program selection entering letters You can select channels by entering their channel names For this purpose the numbers 2 9 on the remote control are assigned to groups of letters e Open the channel list with OK e Press 0 to activate the input of letters Press 2 9 to enter the first letter of the channel name e g 9 for the letter Z 3 for the letter D etc
14. 5 6 Adjusting the digital recorder to the satellite antenna ee 17 5 7 Reception of signals from encoded satellite channels 19 6 Editing channel Uist sesssssesssecssossivssserasaswansssacessssavsnrviassseintssniuansatvenesianeseusessasonatarnenes 20 6 1 Creating lists of favorites 225 0220 ccens cece near 20 6 2 Deleting channel sesers eserse ronen Nenn ren een ea 21 6 3 Moving channe Sassin isisao tea AEE aE 21 6 4 lockingehannelssisicss ispiser EARE 21 6 5 Undoing the channel lock ssiri isine irene s enanar ei ENE nennen 22 7 Basicfunctions s ssasseessssessnsesssssossessssssosusssossscsacssosssssassscssossosscssacsessaossassacssossoseo 22 7 1 Adjusting the volume uu essen ent 22 EIER E EEE EEEE AA E TO E E 22 7 3 Selecting channels numerical preset channel selection 22 ZA Preset AV channel 200 2 23 7 5 Selecting channels from the TV radio channel lists 0 00 23 7 6 Selecting channels from the list ucsnsesnseesneesseennnnesneennnnn nenne nennen 23 7 7 Alphanumerical program selection entering letters 23 7 8 Selecting locked channels u 24 7 9 Lapping tunction sisccscietsciassssseceassssetesecccseides Ea E AERA ees 24 710 Selecting the audio channel ws iasdetensiasdedsnsan ded seca dedeacnta toda iaia a 24 7A Teletexticcers tvateors nenne E he 25 8 Updating the channel list sscsc
15. A list of all the channels beginning with the letters W X Y or Z appears on the screen With each additional letter entered the list of channels displayed is reduced Select the desired channel with W A and lt P and press OK to open it L 2 0 Z LJ 3 98 0 7 8 Selecting locked channels 7 9 Zapping function 7 10 Selecting the audio channel If you select a locked channel you will only see the chan nel name with a key symbol By entering the password you can activate locked channels until the next time the device is switched off see also page 22 chapter Undoing the chan nel lock Use V A or 1 0 to select a preset channel Input Password appears If Input Password is not displayed press OK to call the text message Enter the password with 1 0 All locked channels are activated until you switch the dig ital recorder off again This function allows you to save the channel you are cur rently watching and switch to and between this channel and other channels zapping To save a channel in the zapping memory press 1 O or V A to select the channel and save it with Z The channel name appears on the screen e g TV 8 Press 1 0 or V A to select a different channel Press Z to switch to the saved channel and back to the chan nel last seen Press i to finish your setting For channels broadcasting in several languages you can se lect a diff
16. GSS Grundig SAT Systems Digital Satellite Recorder PRS 1080 CI English Ce Bedienungsanleitung Operating Instructions GSS Phone 49 0 911 703 8877 Grundig SAT Systems GmbH Fax 49 0 911 703 9210 Beuthener Strasse 43 E mail info gss tv 90471 Nuremberg Germany Internet http www gss tv Contents Diener 4 1 General information siscessissecsssesteasisrasscacasivecesiissssncoudsiasdevesesssdetsdvaseasnastelidccstitsiestsiies 5 Vel Packageconteritsy cccsccc2s seccesedszadestadsadcectlsaiecesasgeausdededaed sgassdeeesbbucheguuieseieeds 5 1 2 Accessories for satellite receivers uuennenesnesnesseeeseen nennen nennen 5 1 3 Digital satellite reception sezctceticasnvenstecesusesdecstheadupodsevendedsseesasberedemecuseaueeeens 5 1 4 Special features of your digital recorder ccccceseeeeeeseeceeeeeteeeneeeneeesneeeneees 5 LS The common imtertac sysivccasscticddivensascaetedensedavenacaoeste tava beatesadd EREEREER 6 2 Setup and safety cessiasassivsssesssassicscseiasssiviannseressnsinawsesasarissesersianninsevanesascapsisiaavateass 6 3 Your devicerat G Glance sscsssscssssssssvsacsssnsceusscriscsvssansvssssusesssccsssadivasentavsacevenssesnestindsnese 7 3 1 Thesdigital recorden usa diese A EE 7 3 2 The SAT mouse ernennen aneinander u 8 3 3 The remote control sagen eisernen 8 A Connecting the device uuen nennen 10 4 1 Connecting the satellite antenna uucsenseenneen
17. Options Select Date Prog 22 07 TV 0001 Mon TV 0012 Mo Fr 40008 Mo Sa RA 0001 Mo Su TV 0006 24107 TV 0001 Pro Sieben QO Delete Start Stop 22 00 23 00 17 15 18 00 18 45 19 00 06 00 08 00 20 00 20 15 22 00 23 00 Exit Back Press the EPG button twice Select the programme with W A lt 4 P Press the green button The displayed programme is entered in the timer with all relevant data such as date start and finish times chan nel name information etc The TIMER menu is displayed see also chapter Timer functions page 29 To close the electronic programme guide press MENU 28 10 Timer functions Your digital recorder has a sleep timer for switching off your device at a defined time Furthermore your digital recorder has 30 timer positions that you can set manually or automatically by applying the data selected in the EPG 10 1 Entering the switch off time for the sleep timer Main Menu e Select Sleep Timer in the Main Menu with W A and 4 Channel List press OK to confirm 2i Systemisetup Confirm Time with OK 3 Channel Search 4 Timer e Select the switch off time in 30 minute steps sleep timer OFF Sleep Timer 30 240 minutes with W amp and press OK to confirm z e To finish your setting press MENU The digital recorder switches to standby mode after the set time Exit Back o Sel
18. T e Select the recording to be renamed with V A and lt P gt and press the yellow button to highlight it e In the menu that appears delete letters from the name or delete the name of the recording use 4 P to place the cur sor to the right of the letter to be deleted and press the red button or press it repeatly e Use 1 O to enter the new name of the recording Press the corresponding button as many times as the number of the position of the letter to be entered in the group of letters e g for the letter s press button 7 four times The cursor control button gt is for using either capitals or small letters e Press OK to confirm your entries e To finish your setting press MENU 0 9B ENGLISH 11 5 Deleting a recording Archives Pi Tagesschau MEPS 3 Planet C 4 Abenteu 5 Richter 6 Alpenwetter 8 Der Gladiatoren 0 00 25 Info Delete Exit Start g Sort Back 12 Special functions 12 1 Hotel mode 12 1 1 Locking the menu System Setup 1 LNB Settings I 6 Password Setting ee 7 Clear Channel List GSS 8 Factory Settings j Hotel Mode Meng Locked Loudness o o Select 8 so Back Use V A to select the recording to be deleted Press the red button Select any more recordings to be deleted with W A Recordings to be deleted are displayed in red Press the red button Use to select
19. Yes in the security query that appears and press OK to confirm The highlighted recordings are deleted To finish your setting press MENU The Hotel Mode menu is for locking all access to the menus and limiting the volume to a maximum level The default password is O 0 0 0 Use W in the main menu to select System Setup and press OK to confirm Use V A to activate Hotel Mode and press OK to confirm Enter the 4 digit password In the Hotel Mode menu confirm Menu with OK or select Menu with V A and press OK to confirm e Use V A to activate Locked and press OK to confirm e To save and finish your setting press MENU a 30 12 1 2 Limiting the volume Hotel Mode s Menu Exit Back D 8 a Select s 12 1 3 Removing the menu lock Use V A in the main menu to select System Setup and press OK to confirm Use V A to activate Hotel Mode and press OK to confirm Enter the 4 digit password Use V A in the Hotel Mode menu to select Loudness and press OK to confirm Use V A to set the desired volume Normal 4 and press OK to confirm To save and finish your setting press MENU e Press the Menu button for approx 5 seconds e Enter the 4 digit password In the main menu that appears use V A to select System Setup and press OK to confirm Use V A to activate Hotel Mode and press OK to conf
20. anguage Default is Language German LNB settings Single LNB Switching the recorder on and off e Switch the television to AV e Press on stand by to switch on the digital recorder op eration indicator lights up red or to switch it to stand by operation indicator goes oul If a recording timer has been set the operation indicator flashes Note The only way to disconnect the digital recorder from the mains supply is to unplug the mains adapter General menu information This device has a comprehensive easy to use menu system The menus are displayed on the television screen The digital recorder responds to many functions that you can select on the remote control with informative menus and Sema icons on the screen It enables you to select many different Gss settings and it contains information on using your digital o Q Select recorder The buttons on the remote control for using the menu are explained in the menus The main menu contains the most important controls for your digital recorder The menu system controls the dialogue be tween you and the digital recorder Press the MENU button on the remote control and press V A to select the desired menu item It is displayed on a light background Press OK to confirm your selection Use V A in the cor responding sub menu that is now displayed to select the desired menu item It is displayed on a light back
21. ation on the manufacturer of the product on the product designation on the software version on the Internet address of the manufacturer Information e Use V A in the main menu to select System Setup and Manufacturer css press OK to confirm Model PRS 1080 CI u i n E 10 Use V A to select Information and press OK to Internet http www gss tv activate e To exit the menu press MENU o o Select 8 se Back 40 13 3 Technical data This product complies with the following EU directives 73 23 EEC and 89 336 EEC It complies with the standard required for CE labelling EN 55013 1990 incl A12 1994 A13 1996 A14 1999 C EN 55020 1994 incl All 1996 A12 A13 A14 1999 EN 60065 1998 EN 61000 3 2 1995 incl A14 2000 EN 61000 3 3 1995 TV channels radio stations 3000 TV 1500 radio Number of satellite levels Max 16 Reception range 950 2150 MHz Input symbol rate 1 45 megasymbols per second SAT IF input 1 F connector LNB power supply 13 V 18 V max 300 mA LNB switching signal O 22 kHz 0 5 Vp Tone burst DiSEqC DiSEqC 1 0 control OSD Display and programming functions in 5 languages German English Czech Turkish Spanish Search Automatic manual Last station memory Switches on with the last station selected Teletext Teletext decoder installed supports the teletext of the television set Hard disk 80 GB Software do
22. ect 10 2 Automatically setting the timer Data is adapted from the EPG for the automatic setting of the timer chapter Electronic programme guide page 28 This data can be changed manually chapter Manually set ting the timer 10 3 Manually setting the timer The manual timer setting enables you to let your digital recorder record ona particular date on particular weekdays every day from Monday to Friday every day from Monday to Saturday every day from Monday to Sunday from a TV or radio channel that can be freely selected from the channel lists at a particular time Main Menu e Select Timer in the Main Menu with V A and press OK 1 to confirm 2 System Setup 3 Channel Search 4 Timer 5 Sleep Timer 6 Software Update 7 Cl Module e Select timer position Timer 1 30 with V A and press OK to confirm The current date is displayed o Select o Back 29 L ae 0 Z Ld TIMER e Use V A or 0 9 to set the day of recording Move the Date Prog Start Stop TREE GRICE FAG ao cursor on month and use W A or 0 9 to set the month Timer 2 Mon TV 0012 17 15 18 00 Instead of the date you can set Timer 3 Mo Fr Ar 0008 18 45 19 00 Timer 4 Mo Su RA0001 06 00 08 00 Mo ms Monday Timer5 Mo Sa TV0006 20 00 20 15 Tu _ Tuesday Timer 6 KOAR We Wednesday Th Thursday Daily End _ R en
23. erent language the audio type and digital sound AC 3 if provided Digital sound is only available at the optical SPDIF output Press i The channel information is displayed Press i repeatedly to select the desired audio type OO Digital multi channel sound AC 3 GD Stereo sound OO Dual sound O Mono sound 1 2 For example 2 languages or audio channels are transmitted language 1 is selected Press OK to save your setting Ae Note If a stereo transmission is faulty the left stereo channel might transmit a different language than the right one e Use A B to change stereo channels 7 11 Teletext Teletext is a service offered by some broadcasters that is provided along with the video and audio signals These signals are converted by the digital recorder and can be displayed on the TV screen as teletext e Select the TV channel for which you wish to view teletext with 1 Oor V A e To open teletext press TXT Text page 100 appears on the screen e Enter the three digit number of a text page with 1 O or use V A to scroll between text pages e To close teletext press TXT L 2 0 Z LJ 0 DB a 8 Updating the channel list Preset channel lists This digital recorder was programmed at the factory with most digital TV and RADIO channels on the Astra 19 2 East EutelSat Hotbird 13 East and Turksat 1C satellites You can open the corresponding lists in the Channel List by pressin
24. esschau The message shows the current time the selected audio type the function Playback gt with the title of the recording and how long it is the function Record with the title of the programme o Vio 11 4 Editing the Archives You can only edit the Archives if recording and playback are not active A current recording is displayed with refer ence to the programme at the top of the inset picture with Record Moving recordings Archives e Open the Archives with LIST i Tagesschau 07074 e Select the recording to be moved with W and press the 2 Frontal aaa green button to highlight it oa e Any other recordings are selected with W A Richter 6 Aipenwetter e Press the green button to confirm the selected recordings s KampiideniG raae tore ae e Use V A to select the line recording in front of which the en S Dest a highlighted recordings are to be inserted e To move recordings press the green button e Inthe security query that appears press 4 P to select Yes and press OK to confirm The highlighted recordings are moved e To finish your setting press MENU Renaming recordings You can rename recordings or change their titles e g if a name is used twice For this purpose the numbers 1 O on the remote control are assigned to groups of letters and special characters e Open the Archives with LIS
25. f you do use it outdoors please ensure that it is protected from moisture such as rain or splashing water e Make sure that the digital recorder is ventilated adequately e Do not use the device close to heating units or in direct sunlight e Place the device on a flat solid surface for use e If placed in a cabinet make sure there is a minimum space of approx 10 cm around it e Thunderstorms are a danger to all electrical devices Even if the device is switched off it can be damaged by a stroke of lightning to the mains or the antenna cable There fore always disconnect the device from the mains and from the antenna unit during a thunderstorm e Never open the device under any circumstances No liability is accepted for any dam age caused by incorrect handling Environmental note If you do not intend to use the digital recorder for some time for example at night we recommend that you switch it with to stand by Power consumption is reduced to approx 0 5 Watts 3 Your device at a glance 3 1 The digital recorder Cl MODULE Common interface slot INPUT SAT Antenna socket for the satellite antenna 12 24 V DC Socket for the supplied mains adapter RECORDER Euro AV socket input and output for the video or DVD recorder TV Euro AV output socket for the television DIGITAL AUDIO OUT Optical connection for digitally encoded audio signals to the dig ital multi channel amplifier SPDIF AUDIO OUT RL Left right s
26. g 4 P Because there are new satellite channels every now and then or because satellite data is changed it is advisable to occasionally start an automatic search on the digital recorder and update the channel lists Automatic channel search Main Menu 1 Channel List KIBZAUERT 3 Channel Search 4 Timer e 5 Sleep Timer Software Update 7 Cl Module GSS Select 950 ee Back Channel Search 2 Method ERSTE r Satellite Astra Option Free Start ogo Select Back e Channel Search Astra V high 80 Pro Sieben 250 Radio S25 118 28 MHz 22000 444 TERRA Nova TV 25 993 ASTRAHD 10 SR1 RA J 1 Bayern 1 9 NDR Info Cancel 2 Exit Select 95 Back During the automatic channel search the selected satellite is scanned for new channels Select Channel Search in the Main Menu with W A and press OK to confirm Select Method with W A and press OK to confirm In the menu use V A to select Satellite and press OK to confirm Use V A to select Satellite and press OK to confirm Use V A to select the desired satellite and press OK to confirm Select Option with W A and press OK to confirm Use V A to set Free or All encoded channels are also searched for and press OK to confirm Select Start with W and press OK to start the search The window on the left shows the current transponder settings and the number of TV channe
27. ground Back Press OK to confirm your selection Normally another menu then appears There you can press V A to select the de sired menu item You can also select the numbered menu items directly using the numerical buttons 1 0 oe L 0 Z Ld The lt gt buttons are control buttons On closing the menu function your settings are automati cally saved You return to the previous menu via Z To close the menu function press MENU Note In menu mode you cannot press to switch the digital recorder to standby 5 3 Setting the menu language Pn e Press MENU to open the main menu e Select System Setup with W A and press OK to confirm mea l e Select Language Time with V A and press OK to con firm e Open Language with OK e Use V A to select the desired language and press OK to confirm e To return to the previous menu press the Z button To finish your setting press MENU o Select 8 I Back 5 4 Setting the local time To ensure that the electronic programme guide always shows the current programmes at the right time you must enter the difference between your local time and GMT Greenwich Mean Time degree of longitude 0 All times given by the electronic programme guide are then adapted to your local time Ananas Tine Press MENU to open the main menu Language Gur 2 he e Select System Setup with W A and press OK t
28. gt e Select LNB System in the LNB Settings menu with V A aiid Back and press OK to confirm LNB Settings The following is displayed in the sub menu g g play LNB System oe off For switching off the LNB power supply ngs oa eel Tone Burst Single A single satellite is used for reception DiSEqC 1 0 a g u g P Tone Burst Signals from two satellites can be re ceived DiSEqC 1 0 Signals can be received from up to 4 satellites Exit Back D o Select Receiving signals from a single satellite e Select LNB System in the LNB Settings menu with W A and press OK to confirm e Use V A to select Single and press OK to confirm e Select SAT System 1 with V A and press OK to confirm e Use V A to select the menu item to be changed and press OK to confirm SAT System 1 Name Change the satellite name Astra e Use lt 4 P to place the cursor under LNB Type Low High Band ihe leiterta be chanacd Oscillator Low _ 09750 MHz ee jes 40600 MHz e Use V A to set letters e Press OK to confirm LNB Type e Use V A to select the LNB that is used e Press OK to confirm Oscillator Low Set the LNB oscillator frequency Low band e Use lt P to place the cursor un der the number to be changed gt Enter value with 1 0 e Press OK to confirm Oscillator High e Set the LNB oscillator frequency High band
29. he software the recorder switches to preset channel 1 Note In exceptional cases the software can be updated using a PC via SOFTWARE MOUSE RS232 interface You can find the required software and the corresponding instructions on the Internet under http www gss tv 12 5 Deleting channel lists You can completely delete channels from the channel lists and lists of favourites System Setup e Use V A in the main menu to select System Setup and 1 LNB System press OK to confirm are e Use V A to activate Clear Channel List and press OK to confirm Use 4 P to select Yes and press OK to confirm GSS e To finish the procedure press MENU 8 Factory settings O 2 Select 2 Back 39 L 2 0 Z LJ 13 Information 13 1 Displaying information on reception of channels Channel List TV e Use V A in the main menu to select Channel List and press OK to confirm e Use V A to select a channel and press OK to confirm we e Display and hide reception information with i ek Note IE The displayed signal level not only depends on the set tings of your receiver unit but also on the channel that is currently active Remember this when aligning your antenna using the sig nal level display e To exit the menu press MENU Delete 7 9 Sort Exit List 1 Back Protect 13 2 Querying device information The Information menu contains inform
30. irm Enter the 4 digit password Confirm Menu in the Hotel Mode menu with OK or select Menu with W and press OK to confirm e Use V A to activate Normal and press OK to confirm e To save and finish your setting press MENU 12 2 Changing the password System Setup 2 TV Set EU E Input Password g 4 Hotel W vee Informim 6 Password Setting sore Clear Channel List ei 8 Factory Settings 2 Q Select Back The default password is 0 0 0 0 We recommend that you replace it with your own personal password Use V A in the main menu to select System Setup and press OK to confirm Use W to activate Password Setting and press OK to confirm Enter the current password with O 9 and then enter the new password e Enter the new password again to confirm it e To save and finish your setting press MENU 137 L 2 0 Z LJ 12 3 Restoring the factory settings Note With this function you can delete all your own settings in cluding the lists of favourites and reset the digital recorder to its original state Use W in the main menu to select System Setup and System Setup press OK to confirm A e Use V A to activate Factory Settings and press OK to confirm 3 I o Use 4 P to select Yes and press OK to confirm GSS All your settings are deleted 8 Factory Settings o Select 8 ee
31. le see 5 Sleep Timer its operating instructions We Toreturn to the previous menu press the Z button e To finish your setting press MENU 950 Select Back Note If Camera is displayed in a channel window this means that sub programmes are available z 1 General informati e To open sub programmes press OK 2 3 Film 2 11 00 e Select the desired channel with W A amp and lt P and fr 4 Film 3 es press OK to open CCEE GEE E 3 rim 1000 5 rim e 100 1 19 6 Editing channel lists This menu is for changing the order of the preset TV and RA Radio channels as desired deleting channels you do not need and locking channels You can select your favourite channels and save them in four separate lists of favourites Main Menu e Pi Channeltist Alm I 5 Sleep Timer 6 Software Update Exit amp Select 950 chee Back 6 1 Creating lists of favourites peate Exit O Protect List 1 Back AEn 3 4 Select Channel List in the Main Menu with V A and press OK to confirm The TV Channel list appears To change channel lists press the TV R button repeatedly Channel List TV gt Channel List RA gt Channel List 1 gt Channel List 2 gt Channel List 3 gt Channel List 4 gt Channel List TV Select Channel List TV with TV R Select the channel to be entered into the list of favou
32. ls black and radio channels blue found The window on the right shows the channels last found and the channel number New TV or radio channels are added to the end of the channel list To cancel the search press OK reaction time approx 3 seconds To return to the previous menu press the Z button To finish your setting press MENU 26 Manual Channel search Main Menu If the channel search does not automatically find a particu 1 Channel List lar channel you can set it using the manual search To do AEBEZARST II th f th h looki 3 Channel Search so enter all the parameters of tne channel you are looking 4 Timer for You can find the latest transponder data on the teletext 5 Sleep Timer pages of various broadcasters in a new satellite TV maga 6 Software Update u ama GSS zine or on the Internet e Select Channel Search in the Main Menu with V A and oco Select press OK to confirm Back Channel Search e Select Method with Y A and press OK to confirm Method ETE e Inthe menu use V A to select Transponder and press OK Satelite Astra o confi Option Free CONT Start Select 950 Es Back Channel Search e Use V A to select the item to be set and press OK to con Method __ irn TC firm ee ae e Use V A to set the parameters and press OK each time to Po Horizontal confirm Symbokste o 27500 If required use to place the cursor unde
33. neenneennee nenne nnee nennen 11 4 2 Connecting the televisiOnice cavers vacsasntecacvetevsetiyssa oen EEEE AREE 11 4 3 Connecting the AV recorder player ssiisseseieeserieeesrieersrrreresrrerrsrrreersrreen 11 4 4 Connecting the SAT mouse eeneneenseeseenseesnennee nee nenne nee nme 11 4 5 Connecting the hifi system innser nniaan aae aa i aesae 12 4 6 Connecting the digital multi channel amplifier SPDIF 0 12 4 7 Connecting the mains adapter ueneeneennneennennennneennne nennen 12 5 Preparations eeseesessenessenessenennensnnensnnensnnsnenssnsnnsnsnsensnnensnsensnnenssnenssnessssenssnsnssnssssnennsen 13 5 1 Switching the recorder on and off 2uceesseenneenneenneennnennee essen 13 52 General menwinform ti n zuistaze unsinnig 13 3 93 Setting the menu language cessere oorner tiosta iteko Keka Eea Sr cot 14 5 4 Setting the local time secvicsseisnsrsescteneaendassstedneeeesyade nerd ennei intenet 14 5 5 Adjusting the digital recorder to the television set 15 Setting the video signal for the Euro AV output ceeenennseneenneeenneennnnn ne 15 Setting the screen format for the television ccccceecseeereeeseeeseeeeseesseeeneeess 15 Automatic picture format identification c cccceecseeeseeereeenseesseeeneeesaeentensaes 16 Setting the teletext style ucneseneeseeenneenneenneenne nee nnne nennen nnnse nee 16 Cinch audio Output leveling ane erahnen 16
34. o confirm e Select Language Time with V A and press OK to con firm Select Time Offset with V A and press OK to confirm Use V A to change the time difference in one hour steps Note For Germany GMT 1 hour Summer time winter time conversion is carried out auto matically e Confirm the setting press OK e To return to the previous menu press the Z button e To finish your setting press MENU amp o Select 8 3 1A 5 5 Adjusting the digital recorder to the television set Setting the video signal for the Euro AV output You can choose between the settings CVBS normal pic ture quality factory setting RGB high picture quality and YUV e g for a connected beamer or LCD TV set TV Setup GEB e Select System Setup in the main menu with V A and press OK to confirm or e Select TV Setup with V A and press OK to confirm West e Select TV with V A and then press OK to confirm ee e Use V A to select RGB CVBS or YUV and press OK to confirm Note For the setting RGB and YUV the TV set has to be pre pared appropriately To return to the previous menu press the Z button e To finish your setting press MENU o Select 950 Sc Back Setting the screen format for the television If you have a standard 4 3 format television select the 4 3 setting If you have a 16 9 format screen select the Auto se
35. ogrammes for the next few hours You can call up detailed information on each TV programme at the touch of a button This digital recorder has a comprehensive easy to use menu system It is displayed on the television screen and the functions of the remote control buttons are explained In addition to the receiver unit the digital recorder also has a hard disk with a capacity of 80 Gbyte The technology used enables the simultaneous recording of a SAT programme and play back of a recorded programme This procedure is used for the time shift time delayed television ENGLISH 1 5 The common interface Common interface Cl is the interface for DVB receivers digital recorders set top boxes etc for decoding encoded channels The smart card required for decoding is available at the broadcasting station This device has a common interface Cl slot for this smart card and the corresponding Cl module Set up and safety e This digital recorder set is designed to receive and display video and audio signals Any other use is expressly prohibited e When setting up the device make sure the mains socket is easily accessible e f the digital recorder is subject to a sudden change in temperature for example when brought in from the cold to a warm room let it stand for at least two hours before you connect it to the mains supply e Do not expose the digital recorder to any moisture The digital recorder is designed for use in dry rooms I
36. on the television 4 3 Connecting the AV recorder player x3 e Plug the commercial Euro AV cable into the RECORDER G FZ socket on the digital recorder and into the Euro AV socket on the AV recorder player e g video or DVD recorder P Note To view a video or DVD recording switch on the digital recorder and press the 0 button to select AV mode 4 4 Connecting the SAT mouse e Insert the plug of the SAT mouse into the SOFTWARE MOUSE 4 socket e ENGLISH 4 5 Connecting the hifi system e Plug a commercial cinch cable into the AUDIO OUT RL right left 5 sockets on the digital recorder and the cor responding input sockets on the hifi system 4 6 Connecting the digital multi channel amplifier SPDIF e Remove the socket cover e Plug a commercial optical cable SPDIF into the DIGITAL AUDIO OUT socket on the digital recorder and the cor responding socket on the digital multi channel amplifier 4 7 Connecting the mains adapter sty e Plug the jack plug of the supplied mains adapter into the 12 24 V DC socket on the digital recorder e Plug the mains adapter into the socket 12 5 1 Preparations Note Your digital recorder was set at the factory so that it is ready for operation once you have connected it and to receive Astra channels If required you only need to cor rect the local time difference adjust the LNB settings for receiving more satellites and select the menu l
37. ording e To open the Archives press LIST Any programmes that you have not yet seen are identi fied in the inset picture by New e Use 4 P and V A to select the desired recording To call up information on the content of this recording press the EPG button e Press OK to confirm The recording is displayed as inset picture in the preview window e To switch to large screen press Playback P The Archives menu disappears from the screen 2 9 0 L a 0 Z LJ Freeze frame playback e Play recording e Press the Pause button Ill Resuming playback e Press Pause button Ill again or press Playback gt Fast forward rewind e Press the forward or rewind button You can select Forward PP or Rewind lt 4 functions in 5 stages by repeatedly pressing the corresponding but ton e To end the function press the Stop I Pause Ill or Playback button gt Ending playback e To stop playing press the Stop button MI When this recording is played again it is continued at this point e To end playback press the Stop button Hl again When this recording is played again it is continued at the beginning 11 3 Information on current operation e To briefly display information on the current activities of the digital recorder Press the i button Example Recording a programme Simultaneous playback of another recording 16 00 69 gt Wunderbare Welt 00 30 02 Tag
38. r the number Osten Fiss to be set Start Satellite Satellite selection 020 Select Frequency Enter the five digit channel frequency z Ss with 1 0 Pol For setting the polarization of the channel Horizontal or Vertical Symbol rate Enter five digit channel symbol rate with 1 0 Option Set Free or All encoded channels are also searched for e Select Start with V A and press OK to start the search The new TV or radio channel is automatically added to the end of the channel list e To return to the previous menu press the Z button e To finish your setting press MENU T7 ENGLISH 9 Electronic programme guide EPG The electronic programme guide provides information on the current programme such as the title and a short descrip tion You can also list the following programmes and call up the corresponding descriptions 9 1 Displaying programme information To display information on the current programme Press the EPG button Press EPG again The first table with the following programmes is dis played Use lt P to open other tables e Use V A to select a programme e Press OK to call up information on the selected pro gramme To return to the table with today s programmes press the Z button 9 2 Entering programmes in the recording timer TIMER Timer 1 Timer 2 Timer 3 Timer 4 Timer 5 Timer 6
39. ries 2 x 1 5 V Mignon e g UM 3 or AA e Euro AV cable scart cable e Mains adapter e Operating instructions Accessories for satellite receivers You can find out more about the extensive GSS range of accessories for satellite receiv ing devices at your specialist dealer or at the website of Grundig SAT Systems GmbH http www gss tv Digital satellite reception To use this device you need a satellite receiving device that must be prepared for receiv ing digital signals Unlike analogue satellite broadcasting digital TV or radio channels are not all assigned their own frequencies instead several TV and or radio channels are transmitted by a single transponder using the same frequency To help you with the choice and settings for satellite stations a selection of TV and radio stations have already been programmed for this device You can use the channel search to find new satellite channels that are not yet in the channel list of your device You can also compile your favourite channels and store them in four separate channel lists Special features of your digital recorder This digital recorder can receive and record free satellite channels as well as certain encoded digital satellite channels via common interface To ensure that your digital recorder always uses the latest software we recommend that you update the operating software see page 38 The electronic programme guide provides an overview of all the stations pr
40. rites with V A or V A and lt 4 P press the yellow button to open the List of favourites menu Select the desired list of favourites with and press OK to highlight in white the selection To enter a channel in the list of favourites press the yellow button The selected channel is stored in the list of favourites white The next channel is automatically selected in the TV chan nel list If you wish to enter the automatically selected channel in the list of favourites press the yellow button otherwise use V A and lt P to select the channel to be moved and proceed as described above Notes You can enter the selected channels in several lists of favourites at the same time e Use to place the cursor in succession under the icons to be activated from the lists of favourites and press OK each time to confirm To deactivate an active list of favourites use P to place the cursor under the icon for this list and press OK to con firm 20 6 2 Deleting channels Note If a channel is deleted from a TV or radio channel RA list it is also deleted from the list of favourites If a channel is deleted from one of the lists of favourites the channels still remain in the TV radio channel list Channel List dp e Select a channel list with TV R e Select the channel to be deleted with V A and press the red button to highlight it The channel entry is highlighted in red zs If yo
41. ssssssssscssessesssssssecscscseseceesacsesscsesscseseceeseceesecees 26 9 Electronic programme guide EPG cscsssscsssssscsscscsecscseceesecsesscsesscseseceeeecseeecees 28 9 1 Displaying programme information esensenseeseesensenensee nennen nennen 28 9 2 Entering programmes in the recording timer cecceeseeceseeeeeeeeeeseeeseeeeeess 28 10 Timer fUNCHONS ssssscssssvessiscssssassscnsesavessonrausssvenesesvansuanscosnecssssevenssssosvacvereaeavaosroeeasvenes 29 10 1 Entering the switch off time for the sleep timer nennen 29 10 2 Automatically setting the timer c ccscceeecceeeceneecseeeneeesneeenteetneeenteesneeeees 29 10 3 Manually setting the timer u ucnssenseeneeesneesnnnesnen sense sense nennen 29 10 4 Setting lead time follow up time options ne 31 10 5 Ending the active fimer nn needs ee ro 31 10 6 Deleting a timer position 2uussesseenseenssenesnenneen nennen nee nennen 31 11 Recording playback functions sssisicsssasscvsasecosssorvsscesasisnsutisicenesstusssoiansssarensiasnarernsees 32 Mal R cordingirniisen enanta a a E E RE 32 11 2 Playback ru en ee E AE EAEE REAR E 33 11 3 Information on current operation ueneneeeensseeneee nennen nennen nenne 34 11 4 Editingrthe Archives anna 35 11 3 Deletinigh ete Gord in sie isicss enian sennesanesheccasaeqpecdasaenndsenenepiced ARE ane 36 12 Special functions nennen 36 12 1 Hotel mode ne een 36 12 2 Changing the
42. tereo output sockets cinch for the hifi system SOFTWARE MOUSE Socket for SAT mouse or for a PC cable ENGLISH 3 2 The SAT mouse The SAT mouse receives the infrared signals for the remote con trol and forwards the commands via cable to the recorder Position the SAT mouse visibly so that it can receive the com e mands by the remote control Note The red operation indicator goes out in standby mode The operation indicator flashes if a recording timer has been set and the recorder is in standby mode and during recording 3 3 The remote control Switches to standby and from standby to the channel last selected Select channels AV mode Switches between digital recorder mode and the audio and video signals from the device connect ed to the RECORDER socket Switches the sound to mute and back on again Switches between radio mode and the channel lists and lists of favourites Opens the main menu ends settings Channel Zapping function In menu mode returns to the previous menu Switches between audio channels A B and gt Timer Changes the volume controls the cursor in the menus Cm OC Switches channels up and down one by one se Ca m 9 Opens the channel list confirms entries Opens teletext Opens the electronic programme guide Time shift recording Pause Freeze frame Record deletes entries in the menus Fast rewind moves entries in the menus chives RCR 100 Playback opens sub menus
43. tting e Select System Setup in the main menu with V A and press OK to confirm e Select TV Setup with W A and press OK to confirm Teletext e Select Picture Format with V A and then press OK to IR Level confirm e Use V A to select the desired screen format and press OK to confirm e To return to the previous menu press the Z button e To finish your setting press MENU L 2 0 Z Ld 15 Automatic picture format identification TV Setup Picture Format WER Teletext IR Level SAT 1 Cinch Audio Fixed Exit 950 Select Back If problems with the automatic picture format switchover e g 4 3 16 9 Letterbox arise with the connected device you can switch off Wide Screen Signaling WSS in this menu Use W in the main menu to select System Setup and press OK to confirm Select TV Setup with V A and press OK to confirm Use V A to select WSS and press OK to confirm Use V A to switch WSS on off To return to the previous menu press the Z button e To finish your setting press MENU Setting the teletext style Picture Format Auto Teletext IR Level Cinch Audio Exit O Select 950 cae Back This menu is for setting the parameters required to display West European or Slavic characters Use V A in the main menu to select System Setup and press OK to confirm Select TV Setup with V A and press OK to confirm
44. u wish select any other channel with W A e To delete channels press the red button again 8 e Use 4 P to select Yes in the security query that appears TVIRA E it y Om Osk De and press OK to confirm the Delete channel action Protect Back Fr Das Erste 6 3 Moving channels Channel List TV amp e Select the desired channel list with TV R 1 Das erste o o e Select the channel to be moved with W and press the green button to highlight it Are you sure e Any other channels are selected with W A EEE e Press the green button to confirm the selected channels e Use V A to select the channel in front of which the selected loess channel is to be inserted TVIRA Delete z Info Dest a Protect ae e To move channels press the green button e Use 4 P to select Yes in the security query that appears and press OK to confirm The highlighted channels are moved To return to the previous menu press the Z button e To finish your setting press MENU 6 4 Locking channels This menu is for locking channels with a password that is valid for all protected chan nels Channel List TV e To open the desired channel list press TV R 1 Das Erste e Select the channel to be locked with V A and press the blue button to confirm Input Password appears e Enter the password with 1 0 The default password is 0 0 0 0 8 ProSieben
45. wnload Via satellite Astra 19 2 East Mains adapter 12 24 V DC Power consumption Operation approx 12 W without LNB and common in terface stand by approx 0 5 W Ambient temperature 5 C 40 C Dimensions W x H x D 219 x 53 5 x 119 mm 13 4 Warranty Our devices are developed manufactured and tested according to the latest technologi cal standards If a malfunction should nevertheless occur please consult your specialist dealer or con tact the point of sale where you purchased the device Therefore always keep your sales receipt Warranty claims cannot be made directly to GSS Grundig SAT Systems GmbH L 2 0 Z Lu Al 13 5 Troubleshooting Please observe the following information first in the event of an error If you are unable to rectify the fault using the information given here please contact your local dealer or service specialist Never under any circumstances attempt to repair the digital recorder yourself That would invalidate any warranty claims No function Mains adapter connected incor Connect the mains adapter no operation rectly correctly indication Device switched off Switch on the device with remote control No picture The Euro AV cable is not Connect Euro AV cable connected correctly correctly Incorrect settings in the Set the menu TV setup menu No sound The sound is off muted End muting The Euro AV cable is not Connect Euro AV cable connected correctly correctly
46. xt we e Use V A in the main menu to select System Setup and press OK to confirm Cinch Audio e Use V A to activate TV Setup and press OK to confirm e Select IR Level with V A and press OK to confirm e Use V A to select remote control level SAT 1 or SAT 2 and press OK to confirm If you wish to use the digital recorder with remote control level SAT 2 press and hold the button SAT and at the same time press the desired function button on the remote control I 0 Z LJ Switching the remote control to SAT 2 level You can switch the remote control permanently to the SAT 2 remote control level e Press the button SAT and hold e At the same time press the buttons 4 5 6 To return to SAT 1 remote control level e Press the button SAT and hold e At the same time press the buttons 1 2 3 e To finish your setting press MENU Connecting the device Overview MAT MLLL UUU TIUN A UH HHH J HUU UE UNYI ML Toa uva mm ZI RI A R 5 W 2O u VCR DVD etc 10 4 1 Connecting the satellite antenna e Connect the antenna cable to the INPUT SAT 1 socket on the digital recorder screw connector F connector 4 2 Connecting the television e Plug the Euro AV cable into the TV 2 socket on the digital recorder and into the corresponding Euro AV socket
Download Pdf Manuals
Related Search