Safety and Instruction Manual for ST04 Cordless Grass
Contents
1. Gtech A Safety and Instruction Manual for ST04 Cordless Grass Trimmer 1 Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk ST04 Cordless Grass Trimmer Contents Page 3 Page 6 Page Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 15 Page 16 Page 1 Page 1 Page 18 Page 19 Safety Information Part Location Battery Charging and Recharging Assembly Fitting and Replacing the Blade Telescopic Tube Adjustment Assist Handle Adjustment Cutting Head Adjustment Using Your Trimmer Cutting and Edging Care and Maintenance Troubleshooting Environment and Product Recycling Technical Specification Warranty Information Declaration of Conformity Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk 2 Important Safety Information IMPORTANT O FOR YOUR OWN SAFETY AND BYSTANDERS READ THE INSTRUCTIONS BEFORE OPERATING THE MACHINE PLEASE KEEP THE INSTRUCTIONS SAFE FOR FUTURE REFERENCE WARNING When using the machine the safety instructions must be followed WARNING THIS PRODUCT CAN CAUSE SERIOUS INJURIES Read all instructions Failure to follow all instructions listed below may result in electric shock fire and or serious injury The term power tool in all of the warnings listed below refers to your mains operated corded power tool or battery operated cordless power tool WARNING When usin2. eStore idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool Power tools are dangerous in the hands of untrained users email support greytechnology co uk 4 www greytechnology co uk Maintain power tools Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the power tools operation If damaged have the power tool repaired before use Many accidents are caused by poorly maintained power tools eCheck that the cutting blades are cleanand without damage If the blade becomes worn a replacement should be fitted before use eUse the power tool accessories etc In accordance with these instructions and inthe manner intended for the particular type of power tool taking into account the working conditions and the work to be performed Use of the power tool for operations different from those intended could result in a hazardous situation Only use the machine in daylight or good artificial light Before using the machine and after any impact check for signs of wear or damage and repair as necessary eAlways ensure that ventilation openings are kept clear of debris Keep the product and all accessories away from hot surfaces eStore the tool in a secure dry place out of reach of children and animals eNever modify the trimmer in any way as this may increase the risk
3. carrying out maintenance on the power tool Never operate the power tool with damaged guards or without the guards in place The operator or user is responsible for accidents or hazards occuring to other people at their property Never fit metal cutting elements This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Take care against any device fitted for trimming the filament line length After extending anew cutter line always return the machine to its normal operating position before switching on Power tool use and care Do not force the power tool Use the correct power tool for your application The correct power tool will do the job better and safer at the rate for which it was designed Do not use the power tool if the switch does not turn it on and off Any power tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source and or the battery pack from the power tool before making any adjustments changing accessories or storing power tools Such preventive safety measure reduce the risk of starting the power tool accidentally
4. of personal injury Battery use and care This product contains Ni Cd batteries Do not incinerate batteries or expose to high temperatures as they may explode e Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire eWhen the battery pack is not in use keep away from other metal objects such as paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals may cause burns or fire eIn an emergency situation contact professional help immediately eUnder abusive conditions liquid may be ejected from the battery avoid contact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from a battery may cause irritation or burns Service eHave your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained Do not attempt to repair any damaged parts on this product unless you are qualified to do so eNever use replacement parts or accessories not provided or recommended by the manufacturer Do not attempt to use the charger with any other product nor attempt to charge this product with another charger Using a charger from a different product may cause a risk of fire eLeaks from ba
5. pack Plug the charger into a suitable electrical socket and switch on From flat the battery requires 15 hours to fully charge There is NO indicator to show when the battery is charged Charge for 15 hours to ensure a full charged battery Note the battery will not be damaged if charged for longer than 15 hours but should not be charged for longer than 24 hours 7 Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk Once the battery is fully charged switch off the charger at the mains socket remove the charging jack form the battery pack and unplug the charger from the mains socket WARNING DO NOT PULL THE CHARGER BY THE CORD Push the battery connector onto the battery pack until it securely locates into place WARNING ONLY USE THE CHARGER PROVIDED WITH THE PRODUCT USING ANY OTHER CHARGER MAY DAMAGE THE PRODUCT AND THE BATTERY Only use replacement batteries as supplied by the manufacturer Spare and replacement batteries can be purchased from Grey Technology Tel 0870 7944001 or online at www greytechnology co uk Gtech helpline 0870 7944001 email support greytechnology co uk 8 www greytechnology co uk Assembly Locate the guard onto the head of the trimmer ensuring that the two location hooks engage into the slots on the trimmer head Push the guard forward until the hooks are fully engaged in the slots Fit the guard fixing screw to secure the guard to the trimmer he
6. recommended and will reduce the risk of personal injury Do not operate when barefoot or wearing open sandals Always wear substantial footwear and long trousers eDress appropriately Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts eAvoid accidental starting Ensure the switch is in the off position before plugging in Carrying power tools with your fingers on the switches or plugging in power tools that have the switch on invites accidents Remove any adjusting key or wrench before starting the power tool A key or wrench left in a rotating part of the power tool may result in personal injury eDo not overreach Keep proper footing and balance at all times This enables better control of the power tool in unexpected situations Take care in slippery conditions and on slopes and uneven ground Do not run with the power tool When operating the power tool ensure that both hands are correctly positioned on both handles Do not operate this product if incomplete or with unauthorized modifications Keep hands and feet away from the cutting element at all times and especially when switching on Warning the cutting element will continue to move after the motor is switched off eEnsure that the motor has fully stopped before cleaning clearing a blockage Gtech helpline 0870 7944001 checking or
7. ad fix screw here 9 Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk Fitting and replacing the blade The trimmer has a removable plastic blade that can be replaced with a new blade quickly and easily WARNING do not attempt to remove the blade while the unit is running Wait until the blade has stopped before attempting to remove the blade Never fit metal blades Only fit blades recommended by the manufacturer To fit the blade Place the blade over blade retaining pin then pull the blade outwards to lock into pose blade retaining pin To remove the blade Push the blade toward the centre of the trimmer and lift off the blade retaining pin Warning only fit blades recommended by the manufacturer Replacement blades can be purchased from Grey Technology Ltd Tel 0870 7944001 or online at www greytechnology co uk Gtech helpline 0870 7944001 email support greytechnology co uk 10 www greytechnology co uk Telescopic tube adjustment The telescopic tube length on the trimmer can be varied to suit different user heights WARNING do not attempt to adjust the telescopic tube whilst the blade is rotating Adjusting the handle length Grip the trimmer firmly and release the latch on the lower handle Extend the telescopic tube to the desired length Press the latch down firmly to lock the telescopic tube in position 11 Gtech helpline 0870 7944001 email
8. d electrician to check the socket Contact customer service centre or dealer 5 Charger should feel warm when charging correctly If the product needs to be repaired or replaced only use parts which are approved by the manufacturer Should you experience any problems please do not return the product to the shop For any help and assistance please contact the customer support helpline tel 0870 7944001 email support greytechnology co uk Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk 16 Environmental and Product Recycling The R symbol indicates that this product is covered by legislation for waste electrical and electronic products EN2002 96 EC When the product has reached the end of its life please do not dispose of it with general household waste Consider the environment and take it to a recognised recycling facility Call your local council civic amenity site or recycling centre for information on the disposal and recycling of electrical products i ne cl Alternatively visit www recycle more co uk for advice oN on recycling and to find your nearest recycling facilities 8 A amp arr Battery Disposal The product contains a NiCd battery which should not be disposed of with general household waste At the end of the products or battery s life the battery pack should be disposed of properly at a recycling facility For safety we do not recommend to dis asse
9. g any electrical appliance basic safety precautions should always be observed including the following to reduce the risk of fire electrical shock or injury Work area Keep work area clean and well lit Cluttered and dark areas invite accidents Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust and fumes eKeep children and bystanders away while operating a power tool Distractions can cause you to lose control Not to be used as a toy Not to be used near children Never allow children to use the power tool When not in use store the power tool out of the reach of children eAlways be sure of your footing on ladders or slopes do not over reach or use on excessively steep slopes Electrical safety ePower tool plugs must match the outlet Never modify the plug in any way Do not use any adaptor plugs with earthed grounded power tools Unmodified plugs and matching outlets will reduce the risk of electric shock eAvoid body contact with earthed or grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is earthed or grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord for carrying pulling or unplugging the powe
10. mble and remove the battery from the battery pack and this should only be carried out by a professional or technically competent person It is recommended to dispose of the complete battery pack at a recognised recycling facility ST04 Technical specification WARNING ONLY USE THE CHARGER PROVIDED WITH THE PRODUCT USING ANY OTHER CHARGER MAY DAMAGE THE PRODUCT AND THE BATTERY 17 Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk Warranty Information Grey Technology has provided the ST04 Cordless Grass Trimmer with a 12 month guarantee In Guarantee Please retain your receipt as proof of purchase In the rare and unfortunate event of your Gtech product being faulty please accept our apologies and we will aim to remedy the problem as fast as possible once brought to our attention However please be aware that due to company policy Grey Technology can only repair or replace all or part of the product if proof of purchase is provided and the claim is made within 12 months of the purchase date If your product is within the 12 months warranty period you should either return this product with its receipt to the retailers where the product was purchased or if a simple part or advice is required ring the Gtech customer services line where we will be more than happy to assist Please note Gtech can not refund any monies if the product was brought from a third party We would like to remind our c
11. oisture 15 Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk Troubleshooting PROBLEM Trimmer fails to operate Cutting blade will not cut Cutting time low Trimmer vibrates when running Trimmer stops when cutting Battery not charging POSSIBLE REASON 1 Battery flat 2 Cord not connected to battery pack 3 Faulty switch Blade worn Blade damaged Trimmer not fast enough 1 Battery not fully charged 2 Blade damaged 3 Guard has build up of debris 4 Overloaded motor 5 Battery damaged or not holding charge 1 Blade worn damaged or missing 2 Balance weight damaged or missing 1 Overloaded motor 2 Battery flat 1 Charger not well connected to battery pack 2 Charger not fully pushed into mains socket 3 Mains socket not switched on 4 Defective mains socket cable or charger 5 Charger faulty POSSIBLE SOLUTION 1 Recharge battery 2 Check connection of cord 3 Switch in handle will click if operating properly Replace blade Replace blade Charge battery Recharge battery Replace blade Clean guard Use lighter cutting action Replace battery Fit new blade Call helpline 1 Wait for cut out to reset use lighter cutting action 2 Charge battery 1 Check charger plug is well connected to battery pack 2 Push the charger fully into mains socket 3 Switch on mains socket 4 Consult a qualifie
12. r tool Keep cord away from heat oil sharp edges or moving parts Damaged or entangled cords increase the risk of electric shock eWhen operating a power tool outdoors use an extension cord suitable for outdoor use Use of a cord suitable for outdoor use reduces the risk of electric shock elf the cord becomes damaged during use disconnect the cord from the power supply immediately DO NOT touch the cable before disconnecting Before use check the power supply and charger cables for signs of damage or ageing eWhen charging or operating the power tool it is recommended that the appliance should be supplied via a residual current device RCD with a tripping current of not more than 30mA Do not handle the charger or the power tool with wet hands Personal Safety eStay alert watch what you are doing and use common sense when operating a power tool Do not use any power tool while you are tired or under the influence of drugs alcohol or medication A moment 3 Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk of inattention while operating power tools may result in serious personal injury eAlways be aware of your surroundings and stay alert for possible hazards that you may not be aware of due to concentration on the power tool eUse safety equipment Always wear eye protection Safety eguipment such as non skid shoes safety glasses sturdy gloves and hearing protection are
13. rimmer Trimming Rotate Edging 13 Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk Using your trimmer Fully charge the battery as described in the section Battery Charging and Recharging Push the battery connector onto the battery pack until it securely locates into place The battery pack can be carried in a pocket or the clip fitted onto a waistband or belt Starting and Stopping The handle is designed with a safety button to prevent accidental starting To start the trimmer Press and hold the safety button located on either side of the handle then press the trigger Continue holding the trigger and release the safety button The trimmer will be on for as long as the trigger is pressed Safety button Trigger To stop the trimmer Release the trigger to stop the trimmer WARNING the blade continues to rotate for a few seconds after the trimmer is switched off Do not touch the rotating blade and keep hands and feet clear until the blade stops rotating WARNING always wear eye protection when using the trimmer Gtech helpline 0870 7944001 email support greytechnology co uk 14 www greytechnology co uk Cutting and edging Caution before use remove any stones loose debris and other objects from the cutting area Always take care when other people are around you The trimmer may throw out stones and debris at high speed WARNING always wear eye protec
14. support greytechnology co uk www greytechnology co uk Assist handle adjustment The angle and reach of the assist handle can be adjusted to your preference WARNING do not attempt to adjust the assist handle whilst the blade is rotating Adjusting the assist handle Loosen the knob on the side of the handle Slide the handle along the tube and adjust the angle of the handle to a position which is most comfortable Tighten the knob to fix the assist handle in the new position Loosen Knob Gtech helpline 0870 7944001 email support greytechnology co uk 12 www greytechnology co uk Cutting head adjustment The cutting head can be adjusted to different angles for ease of cutting in different conditions WARNING do not attempt to adjust the cutting head while the blades are rotating Grip the head of the trimmer press and hold the button marked PUSH Rotate the head to the desired angle Release the button to lock the head in position Ensure the button and head are securely locked in position before starting the trimmer The cutting head can be rotated to a vertical position for edge trimming around lawns WARNING do not attempt to rotate the cutting head while the blades are rotating Grip the head of the trimmer and twist half a turn around the handle Caution Ensure the power button is not engaged during adjustment Ensure the button and head are securely locked in position before starting the t
15. ter WR5 1RL declare that the product ST04 Cordless Grass Trimmer complies with the essential health and safety requirements of the following directives 2004 108 EC EMC Directive 98 37 EC Machinery Directive 2006 95 EC Low Voltage Directive 2000 14 EC Noise emission in the environment by equipment for use outdoors Measured Sound Power Level 86 dB A Declared Guaranteed Sound Power Level 87 dB A Technical documentation holder Grey Technology Ltd Standards and technical specifications referred to EN60335 1 EN60335 2 91 EN ISO 10518 EN786 EN55014 1 EN55014 2 EN61000 3 2 EN61000 3 3 Grey Technology Ltd Units 1 amp 2 Cupola Court Spetchley Worcester WR5 1RL tel 0870 7944001 email support greytechnology co uk www greytechnology co uk 19 Copyright Grey Technology Ltd 2008 11 08
16. tion when using the trimmer Hold the trimmer away from the body using both hands Stand in a secure and stable position When cutting move slowly and steadily along the line of cut moving the trimmer from side to side Take care not to overload the trimmer Attempting to force the trimmer to cut may damage the motor To prevent overloading cut long or difficult foliage in stages with several light cuts NOTE the trimmer is fitted with a self resetting protective cut out This will stop the trimmer if the motor becomes overloaded If this occurs wait a few seconds for the cut out to reset and then use lighter cuts Take care not to grind the rotating parts against the ground as this will wear parts and cause damage to the trimmer Take care when trimming around objects such as stone or concrete as these can damage the trimmer blade and parts that attach the blade Care and maintenance To ensure long and reliable service carry out the following maintenance regularly Check for obvious defects such as loose dislodged worn or damaged parts Check that covers and guards are correctly fitted and undamaged Before use visually check the condition of the cutting blade If worn replace with a fresh blade Clean inside the guard after use Remove any dirt or debris using a suitable wooden or plastic tool Do not use water solvents or polishes to clean the trimmer Wipe clean with a dry cloth Store in a dry place Do not expose to m
17. ttery cells can occur under extreme conditions If the liquid gets on the skin wash immediately with soap and water If the liquid gets into the eyes flush them immediately with clean water for a minimum of 10 minutes and seek medical attention Intended use This product is intended for DOMESTIC USE ONLY 5 Gtech helpline 0870 7944001 email support greytechnology co uk www greytechnology co uk Warning Label Descriptions Read instruction General hazard Beware of thrown manual before safety alert or flying objects to use bystanders Do not use in Wear eye protection Measured sound OX rain or leave when using this outdoors whilst product power level 86dB A raining Guaranteed sound m power level 87dB A Note Measured noise values determined according to 2000 14 EC 1 60m height 1 0m distance away Part Location Main unit Power switch Safety button Assist handle Telescopic tube latch Head angle lock Trimmer guard fixing screw Trimmer guard Cutting blade x20 10 Battery Connector 11 Battery Pack 12 Charger 13 Charger plug O Se pE sk Gtech helpline 0870 7944001 email support greytechnology co uk 6 www greytechnology co uk Battery Charging amp Recharging The battery has to be removed from the product to charge it To disconnect the battery pack grip the battery connector and slide it off the battery pack Connect the charging jack into the socket on the battery
18. ustomers that the Gtech guarantee does not cover any unauthorised repairs and will be annulled 1 if the product has been damaged due to incorrect use or maintenance 2 if any part is modified or replaced or if it is used in any way that is not recommended by Gtech 3 if itis used with any parts not produced or not recommended by Gtech 4 if itis used for purposes other than those specified by Gtech Please note the battery is a consumable item and is not covered by the 12 month guarantee If after reading the manual and following the instructions you are sure that the product is defective please call the Gtech customer service helpline on 0870 7944001 A customer service advisor will be on hand to deal with any problems you have with our product To assist them please be ready with the product a detailed description of the problem and your proof of purchase Out of Guarantee If your Gtech product is over 12 month old and you need any parts or advice then please contact our customer services department Parts will be sent out usually within 3 weeks of request WARNING only use the charger supplied with the product Using another charger may damage the product and the battery and will invalidate your guarantee Gtech helpline 0870 7944001 email support greytechnology co uk 18 www greytechnology co uk EC Declaration of Conformity We manufacturer importer Grey Technology Ltd Units 1 amp 2 Cupola Court Spetchley Worces
Download Pdf Manuals
Related Search