Wings Engine Stage Manual
Contents
1. Calculator opens the Windows calculator BlueScreenView opens the analytical tool for system crashes CPU Z opens a hardware analysis tool Crystal Disk Mark opens a hard disk analysis tool which is also suitable for SSDs DPC Latency Checker opens an analytical tool for driver latency determina tion Video Card Stability Test opens the graphics card test program Prime95 opens the CPU and RAM test program Process Explorer opens the process monitor for monitoring system processes 33 Settings Administrator Settings On the desktop click on in the bottom left corner and at the top of the dialog on Administrator This will open a service dialog which is only accessible to support staff 34 Using a uEye camera If you want to use a uEye camera for Vioso calibration proceed as follows 1 Connect your uEye camera to the network and the Wings Engine 2 Click followed by clicking on Settings and open the uEye Cam era Manager 3 At the top of the field the camera is displayed with an exclamation mark This indicates that its address is in a different address range General information Tamera informatioun Create support file ETH network servi Additional functions Automatic ETH configuration Clase 35 Wings Engine Play Install 4 Click Automatic ETH configuration and the IP address is adjusted to the address range used In the completion message click OK2. shows a test image which can be configured in accordance with your requirements See also Displaying test images Settings offers shortcuts for all the most important dialogs and the Wings op tions for master and slave mode and for Task manager Restart and Shutdown See Settings Shortcuts and Settings Wings Vioso Eject USB Devices for safely removing external drives After clicking the but ton a list of external drives is displayed that can be removed by clicking Eject USB Devices Eject All E Generic volume y Generic USB SD Reader USB Device Eject F Generic volume uds XLR8_PLO amp OAB USB Device Eject 11 Wings Engine Play Install e Network Cards specifies the Media Engine s IP address and the subnet mask if there is a network connection Click to change the IP address and the subnet mask Edit Network Settings oO Network Card Local Area Connection Intel R 82579V Giga Use DHCP Current IP Address 10 20 15 23 10 20 15 53 Subnet Mask 255 0 0 255 0 0 0 x Cancel 12 Displaying test images The Wings Engine features a test image generator which allows various test images at suitable resolution to be displayed at all outputs without requiring Wings Vioso This is how the test image generator can be used i OM Alignment 1 Onthe left desktop side click be displayed following which a test image will 2 n order to
3. opens the Windows dialog for the sound properties Network Settings opens the Windows dialog for the existing network cards Date Time Settings opens the Windows dialog for setting date and time Language Settings opens the Windows dialog for regional and language op tions uEye Cockpit opens a window that allows the video image of the uEye camera to be enlarged to adjust sharpness and aperture uEye Camera Manager opens the configuration dialog for uEye cameras Touchside opens the tool for touch panel calibration only Wings Engine Stage Network sharing of the media drive Select Share Drive D to share the media drive on the network User name for sharing and password are Wings A special feature of Wings Engine Stage is the illuminated front grid which can be configured at Front Light Configuration Demo Modes 1 and 2 allow a color change which can be disabled again by click ing Default RGB Test tests the front LEDs and changes over between white red green and blue Intensity enables you to adjust brightness or switch off illumination altogether which may be quite useful for stages and darker environments Info If the Wings Engine Stage is used as a slave the slave status is indicated in different colors 27 Wings Engine Play Install e Green network connection established idling condition everything OK e Blue slave is playing a multidisplay presentation and is in Play or Pa
4. 36 10 AM Default configuration for rental L gt My Wings Configuration 4 10 2014 8 03 42 AM IP Changed Show 1 Autostart 40 Wings Engine Backup Manager Freezing a snapshot disallowing modifications Snapshots can be frozen by clicking the Freeze checkbox This means that any modifi cations in the frozen snapshot are made undone at a restart During a Wings Engine restart the Backup Manager is started first to resume the frozen condition and only then is the system frozen again To quit this condition you need to abort the restart in the Backup Manager and then defreeze the snapshot by unchecking the box Freeze For permanent installation this Freeze function may be quite useful to ensure that the system always starts with the same settings Min wings engine Backup Manager Automatic restart with frozen snapshot in 13 seconds T V Restart now Admin password required cause I don t want to wait Wings Engine Backup Manager 1 2 5 0 from 4 3 2014 10 40 53 AM Locking a snapshot By selecting the Lock button mE you can lock a snapshot After entering a password this snapshot can no longer be selected or deleted The snapshot can only be unlocked again by clicking the Lock button and entering the password A locked snapshot can be recognized by the red button Attention The snapshot can also be unlocked by entering the administrator password which is AVStumpfl as delivered It is therefore a
5. M Color EDID Management Save Load Loaded EDID file C AVStumpfl EDID Display B Display B 1920x1080 60Hz edid Display Settings Resolution 19 1080 7 Refresh Rate ir Color M EDID Management Save Load Unload Reset Loaded EDID file C AWStumpfl EDID Display C Display C 1920x1080 60Hz edid Display Settings Resolution 1920 x 108C r Refresh Rate 60 Color 32 r EDID Management Save Load Unload Reset Loaded EDID file C AWStumpfl EDID Display D Display D 1920x1080 60Hz edid Apply Changes NL Restart D shutdown 2 The following functions are available here x Display identification Click on Front to show all the connected displays and click on A toD on the corresponding display Once a green checkmark appears along with the name of the display the device has been detected The green checkmark appears also when an EDID file has been loaded but no display is connected A loaded EDID is always a guarantee for a stable display assignment 19 Wings Engine Play Install Resolution for setting the required resolution Available resolutions de pend on the loaded EDID Refresh Rate for setting the required refresh rate Available refresh rates depend on the loaded EDID Color for setting the required color depth Available color depths de pend on the loaded EDID EDID Management for saving and loading EDIDs Extended Display Identification Data which are essential for sec
6. Sn ea E DYNAMICS D DYNAMICS B ornan cs A detailed description of the CueMix FX software is available in a PDF file in the Wings Vioso help system under Sound interface of Wings Engine Stage e Audio output under Global Options Sound cards WDM or Sound cards ASIO depending on the preferred driver the ASIO driver does not offer asynchronous sound e Sampling rate and quantization can be adjusted in the Wings Vioso Project Op tions Output Attention For faultless operation the audio output configuration must def initely be identical both in the Wings Vioso Project Options and under Settings Volume Settings In the dialog Sound displayed highlight the output in use and click Properties 17 Wings Engine Play Install ale Advanced On tab Advanced under Default Format enter the same values as in the Wings Vioso Project Options Output e g 16 bits 44100 Hz 18 Display Settings Wings Engine Stage features a clearly structured dialog that contains all the important functions for managing the connected displays DISPLAY D Show Black on Displays Show GUI Display Settings Resolution 1920 x 1200 Refresh Rate 60 ir Color 32 M Display Settings Resolution 1920 x 108C Refresh Rate 60 Md Color 32 v EDID Management Save Load Unload Reset Loaded EDID file C AWStumpfl EDID Display A Display A 1920x1080 60Hz edid Display Settings Resolution 1920 x 108C y Refresh Rate 6
7. be connected to port MONITOR OUT Start the Wings Engine Click and open the EDID Manager 21 Wings Engine Play Install Seene EDID Manager BITTER UTEM Mellin ceri cons Wl show Black on Displays Show GUI x Display Settings Resolution 1920 x 1200 Refresh Rate 60 ir Color 32 M Display Settings Resolution 1920 x 1080 7 20 9 Refresh Rate 66 Hd Color 32 d A EDID Management Save Load Unload Unload Reset DISPLAY A Loaded EDID file C AWStumpfl EDID Display A Display A 1920x1080 60Hz edid Display Settings Resolution 1920 x 108C Refresh Rate 60 I Color B DISPLAY B Loaded EDID file C AWStumpfl EDID Display B Display B 1920x1080 60Hz edid EDID Management Save Load Display Settings Resolution 19 108 m Refresh Rate z Color i F C EDID Management Save Load Unload Reset DISPLAY C Loaded EDID file C AWStumpfl EDID Display C Display C 1920x1080 60Hz edid Display Settings Resolution 1920 x 108 1080 M Refresh Rate 5C Color 32 M EDID Management Save Load Unload Unload Reset DISPLAY D Loaded EDID file Sateen carla tates D Display D 1920x1080 60Hz edid Apply Changes 2 Click Load for the desired display and select the suitable EDID file by double clicking it The following options are available e f you want to use a Standard EDID select a Display X 1920 60Hz edid for a Full HD monitor for example The modes for lower resolutions are contained in thi
8. be selected Press Enter and immediately af ter that F8 following which the Advanced Boot Options will be displayed 3 Start by clicking Option Last Known Good Configuration advanced and press Enter If this does not lead to the required success you can also try out other op tions If the problem cannot be solved turn to our support 45 Documentation Status Last reviewed 16 06 2014 Software versions Wings Vioso 5 5 Wings Touch 1 1 8 Wings Avio Manager 1 1 8 Wings Avio Service 1 1 8 Wings Engine GUI 1 2 6 Wings Engine Light Controller 1 2 0 Wings Engine Backup Manager 1 2 6 46 AV Stumpfl contacts Should there be any questions which cannot be answered in the help section please tell us about this If you encounter any problems using Wings Vioso please use the Support Function If you have any questions or would like to make any suggestions you can reach us on the phone from Monday to Thursday from 8 00 to 12 00 and from 13 00 to 16 30 and on Fridays from 8 00 to 12 00 UTC 1 Outside these hours we can offer fee based emergency support Our emergency hotline is available every day between 8 am and 10 pm UTC 1 at 43 7249 42811 900 However we would like to point out that we charge EUR 30 00 net for every 15 minutes Please bear in mind that we may not be able to answer your call immediately In order to ensure that we can return your call as soon as possible and offer best possible support we are aski
9. display unit 4 This is the opportunity to check and if applicable modify the EDID If the source is to supply only one particular resolution you should remove all other resolu tions from the EDID Click B Save to save the modified EDID You can get back to it again any time later on 5 Now click Burke EDID to DELTA dvi to load the EDID of the video input card If the card features two inputs you need to enter the corresponding input in the following dialog 6 Now disconnect your display unit from the video input card and connect your video source If this is a computer all the resolutions contained in the EDID should now be selectable provided the computer is able to handle them all Otherwise the intersection of resolutions is used 37 Wings Engine Backup Manager In Wings Engine Backup Manager various system conditions so called snapshots can be saved This means that you can make your system settings and then create a back up version You can create various snapshots with different settings and quickly change over between the snapshots It is also possible to freeze a system condition to ensure that any modifications are undone at the next system start and the settings correspond to the frozen condition Starting the Backup Manager During the booting process and after displaying the bios info for three seconds the list for selecting the Backup Manager appears windows Boot Manager Choose an operati
10. ner or press the Esc key 15 Wings Engine Play Install Sound interface The built in sound interface consists of a Motu MicroBook Il with balanced outputs and DSP for effect editing such as parametric EQx compressor FFT and phase analy sis as well as an oscilloscope The CueMix FX software certainly also features a mixer which enables live microphone or LINE 1 2 feeds for example The audio signal is available at sturdy Neutrik connectors Only the guitar signal is not supplied The names specified below the sockets correspond to those used in the driver dialog and the software CueMix FX 16 balanced audio outputs MAIN 1 2 in the form of XLR m sockets digital S P DIF audio output MAIN 1 2 as Cinch socket unbalanced audio output LINE 1 2 as stereo jack headphone output PHONES 1 2 as stereo jack microphone input MIC 1 as XLR f socket Note before you connect dynamic microphones make sure phantom power is off 5 Inthe Settings click Audio Settings 6 Right click tab Channel and click the Phantom the blue LED must be off see arrow balanced audio inputs LINE 1 2 as stereo jacks sleeve ground ring minus tip plus Sound interface of Wings Engine Stage OUTPUTS iad Main 2 tine 2 _ Phones Cmm CANNEL EG lf DYRANGES rens Ste GEN PAD AND PHANTOM SOURCE SOURCE Mix 2 v Mix 3 v PAD gt STEREO MODE NORMAL D M S D SWAP L R WIDTH 099999999
11. proceed If you want to use more than just one type of device and want to save several EDIDS you repeat these steps for dis plays B to D 3 No connect your monitors or projectors whose EDIDs need to be saved to ports A to D With identical devices you just need to connect one device and save one EDID Now the green checkmarks appear and the denominations of the con nected devices 4 To save the EDID of the device click on Save In the file dialog enter a name for the EDID and click Save 5 Repeatthis process for other types of devices if you are using different devices After saving the EDID you can load them to the graphics card See Loading EDID EJ Please note that you can sync the display outputs in Wings Vioso in order to prevent tearing Information on how to proceed can be found in the Wings Vioso help files in chapter Multidisplay Shows Adjusting the graphics output synchronization 23 Touch screen calibration Touchside The front display of Wings Engine Stage has been provided with a touch screen This touch screen can be calibrated using the program Touchside Proceed as follows Click E d and Settings and open the program Touchside Click on tab Tools Touchside USB Controller Edge Compensation Compensation _ Hardware Hardware About General etting Tools Display Linearization Curve Do 4 points alignment to match display Clear linearization parameter and do 4 points alignment
12. 3 0 interfaces 3 Air intake with illumination changes upon system start and indicates the status es of Wings Vioso 4 Touch display 1280 x 800 for system operation the image signal is also applied to the monitor output allowing a larger monitor with up to 1920 x 1200 pixels to be connected 5 Switch for activating and deactivating the system Reset the system by pressing the button for 5 seconds Wings Engine Play Install 10 11 DISPLAY A OUT oe DISPLAY B OUT Im oe DISPLAY C OUT a i eue DISPLAY D OUT Gan m AUDIO OUTA JT t INPI OUT IR Cp TER OUR2LR EE Emu UNE NY UNE NR mami DE pal 20 19 18 17 16 15 14 13 Display outputs A to D as DVI D Wings Engine Stage DUAL only has two outputs A and B Balanced audio outputs MAIN 1 2 in the form of XLR m sockets Digital S P DIF audio output MAIN 1 2 as Cinch socket Unbalanced audio output LINE 1 2 as stereo jack Headphone output PHONES 1 2 as stereo jack Microphone input MIC 1 as XLR f socket Attention before you connect dy namic microphones make sure phantom power is software disabled See Sound interface of Wings Engine Stage Live video inputs DVI IN 1 and 2 both analog and digital signals can be applied Balanced audio inputs LINE 1 2 as stereo jacks sleeve ground ring minus tip plus Live video inputs 3G SDI 1 and 2 Serial interface RS232 Framelock O and 1 as identical sockets for the synchronization of several Wings
13. AN M more WINGS engine VVINGS ENGINE 0 y H HHHH H H HEA H HAHN HH WH WH WINGS ENGINE STAGE User Guide Wings Engine Stage English Version Table of Contents Introduction eig idee 1 Operating conditions and technical data scsccscssceccsccsceccsccsceccscesceccecesceees 3 Technical Data of Wings Engine Stage ccecccccsssseccecesesecceceeesceeeseeeceeeseeeeeeeeseees 4 Front and Rear Views and Ports ccesccscsccsccsccccsccsccccsccsccccnccsccececcscescecees 5 Wings Engine Quick Start u 8 Wings Engine Desktop 225 n 0 e ERIS en 10 Displaying test Images ooo ren trece nee Nauen 13 Sound interface nn TN 16 Display Settings css Cere Ebr een Seo ERR eet MI ek vba ies essen 19 Loading and saving EDID for outputs eee eene ee ee enne eene rere 21 Touch screen calibration Touchside ecce eere 24 STO IEG UES sepsis Nessie 26 NV INES SETEINBS nee ernennen 29 Settings Useful Programs csscsccsccscsecsccsccscecceccscecceccececceccecesceccecsceees 32 Settings Administrator sesesesesesesesesesesessseseseseseseseseosesosseseseseoseseeeseeseee 34 Usine a uEy ecamerd caves iasicciciastuatccnssdeekentanwaavacsnevecadmacsncmevaeeinaeese RIS d NOUO UE 35 Defining EDID for live video INPUTS ccccsccsceccsccsceccsccsceccsccsceccncenceeoncs 37 Wings Engine Backup Manager ccsccscsccsccsccccec
14. Clear and Calibrate Do 25 points linearization for better touchscreen Linearization linearity Do draw test to verify the touch accuracy Draw Test OK Cancel 24 Touch screen calibration Click Linearization following which a program is started which displays 25 calibration points one after the other Calibrate the touch screen by precisely pressing the calibra tion points 25 Shortcuts Settings On the left desktop side click Immem Jto open a dialog that allows access to virtually all relevant Wings Engine configuration dialogs Shortcuts BAW itera IB Wate ciceicels Show Black on Displays Show GUI x e wv NVidi trol 3 i i idia Contro Display Settings Audio Settings Volume Settings Center LIT Network Settings Date Time Settings Language Settings Show Logfiles E E uP or Team Viewer L ETE Startup uEye Camera eye Sn Manager Li Front Light FT Demo Modi Mode1 Mode2 orF EDID Editor Intensity ES E3 E E 100 a n Taskmgr 5 Restart 5 Shutdown e NVidia Control Center opens the Nvidia configuration dialog for setting reso lution synchronization as well as saving and reading of EDID for Wings Engine Stage 26 Settings Shortcuts Display Settings Display Settings opens the dialog for graphics output con figuration and the EDID properties MOTU CueMix Fx opens the sound card dialog Volume Settings
15. Engine Stage units to be used as In and Out Note No LAN connections must be plugged into these RJ45 sockets as this may cause damage 12 13 14 15 16 17 18 19 20 21 Front and Rear Views of Wings Engine Stage Genlock input for synchronization with an overriding time clock Socket II for mains connection of 100 to 264 Volt AC and 47 to 63 Hz Two step power switch for power supply via powerCON socket I or IEC socket II switch is illuminated when on powerCON output for mains supply of other devices mind the total power con sumption of max 16 A max of 3 Wings Engines powerCON input I for mains supply with optionally available powerCON cable eSATA interface for connection of external hard disks Note only for connection with the devices off hot plugging not guaranteed We cannot be held respon sible for any damage FireWire 400 interface USB 2 0 interfaces LAN connection DVI D connector for control monitor the signal of the front touch display is ap plied Max resolution 1920 x 1200 pixels and 60 Hz Wings Engine Quick Start The Wings Engine is pre installed and pre configured and allows very quick starting TL Using the power cable or the optionally available powerCON cable hook up the Wings Engine power supply 7 or 5 with the mains supply Connect keyboard and mouse to the USB ports 4 at the front or back Connect the control monitors or displays for the s
16. Wings Engines features a clearly structured and functional desktop that comprises buttons for the most important functions Wins WINGS engine cau iis Network Cards IP 192 168 222 25 g 1 SUB 255 255 255 0 Pd 1233PM MAMA 1 8 2013 Use the three large icons Wings Touch Wings Vioso and Wings Avio to start the Wings AV Suite applications with the same names If windows are open and cover up the large icons you can start the applications via the small icons in the bottom right corner of the task bar or use the following shortcuts e Wings Touch 72 Windows key T e Wings Vioso Windows key W e Wings Avio Manager Windows key M e Avio Service menu Windows key S e Wings Engine Settings Windows key Ctrl Audio Settings gt Windows key A Graphics settings Windows key G NVidia Manager Windows key N 10 Wings Engine Desktop Desktop Windows key D Center mouse on desktop Windows key O File Explorer Windows key E Mozilla Firefox Windows key F Pocket calculator Windows key C Info Mousing over the Help symbol on the desktop displays a list of shortcuts The other buttons have the following functions opens the Wings Engine manual as PDF Mousing over this symbol displays a list of shortcuts Avio Service opens the Avio Service menu See Wings Avio Service in the Wings Vioso help topics Explorer opens Windows Explorer Alignment
17. and close the uEye Camera Manager The camera is now ready for use Before you start the Vioso calibration you should adjust sharpness and portion using the uEye Cockpit as the large size window allows easier and more accurate settings 1 2 6 Click shortcut uEye Cockpit and button Live video in the dialog box popping up At the top left corner click Open camera for the camera image to be displayed With a new camera or new software you may have some firmware update load ed onto the camera If the image does not show the required resolution and size click Camera prop erties and select tab Size At Profile choose the required resolution Bear in mind that a higher resolution causes a lower frame rate and makes the calibration take longer Click tab AWB and select Off to disable automatic white balance Close the pro perties dialog by clicking Close Now you can adjust sharpness and portion You can now continue with a Vioso calibration See Camera based calibration in the Wings Vioso help system 36 Defining EDID for live video inputs Any desired EDID can be saved for DVI inputs This ensures that the source supplies the defined resolution provided it is able to do so 1 Connect the display or projector whose EDID you want to read out to the video input card Setti 2 Click 4 senes followed by clicking on Shortcuts and open the EDID Edi tor 3 Click E EDID to read the EDID information of the
18. apshot Create New Snapshot Snapshot Name Snapshot Description Parent Snapshot M Use as default X Don t create 39 Wings Engine Play Install Selecting a snapshot By selecting the Use buttons you can choose the snapshot to be used At the system start a Boot Manager showing the selected entry and the Backup Manager are dis played Should you have selected a snapshot with child snapshots you are asked whether you want to create a copy of the selected snapshot or whether you want to delete all child snapshots Parent Snapshot Selected You selected a snapshot with child snapshots but child snapshots would become incompatible once you start the selected snapshot You have three options to proceed Delete all child a Create a copy of the ii snapshots of the gt selected snapshot xX Cancel selection selected snapshot a without child snaphots Changing the snapshot name or description By right clicking the snapshot description or name you can change the description or name System Image AV Stumpfl Wings Engine Stage Factory Image Creation Date 4 7 2014 4 01 46 PM Change Date 4 10 2014 8 36 10 AM Description 1 0 1 gt 1x Manage System Images Create New Snapshot Snapshot Name Date Description Use Freeze Lock Delete First Child 4 7 2014 4 01 46 PM L gt AV Stumpfl Wings Engine Stage Factory Image 4 7 2014 4 01 54 PM Ha 728 Senshot Desertor py B Lb Rental Image 4 10 2014 8
19. ave Settings Reload Settings A LES urs 5 Restart e Master Slave Settings defines whether Wings Vioso starts in Master or Slave mode for Multidisplay shows Check box Run at Startup to start Wings automat ically in the specified mode after starting up At Startup Delay you can enter the 29 Wings Engine Play Install 30 delay time for starting Wings after starting up the system A delay may be useful if the Wings Engine is to establish connections and internal services beforehand Field Master amp Slave allows separate settings for master and slave mode Moreover by clicking and selecting the checkboxes under Default you can enter the parameters that are to apply for a normal startup by clicking the desktop icons The entries made at Autostart are applied if Wings is started automatical ly at the system start At Master you can make the following entries At Startup Options you can choose whether a project and which one is to be opened automatically e No Action opens only the Wings Vioso program window e Show startup options opens the dialog box for selecting projects tem plates and Project Wizards e Open last project opens the project edited last e Open following project opens the specified project Wait for slave connections is an important function for automatic multidis play presentations At Timeout you can specify the maximum period the master is to wait for the slaves Data transfer to
20. csccececcsccececcsccsceccsccscecees 38 Starting the Backup Manager asien 38 CrestinganeW Sia SOC sc ood ORE N ENEG 39 Selecting a Snapshot an Eee 40 Changing the snapshot name or description cccccesecccesececeeeceeseeeceteneceteneeetees 40 Freezing a snapshot disallowing modifications ccccceeeeecceceeseceeeceeeeeeeeeeeesss 41 Table of Contents LOCKING a Snapshot ensure 41 Deleting ASIN ADS NOU re ee 42 Backup Manager Administration mice ito pre He 42 TeamViewer Support MOGOHIG uo an a hl 44 Trouble SDOOHTIg een eve eirsa d sv Sum edes is U Pee M eU adde 45 Documentation Status unse 46 AV Stumpf contacts na nenn energie 47 iii Introduction Wings Engines by AV Stumpfl constitute high performance high reliability hardware for multidisplay shows They incorporate our experience and that of our users They are based on Windows 7 Embedded and have been provided with selected compo nents that ensure optimal configuration All Wings Engines are distinguished by the following features Operating system and show data on SSD guarantee highest performance and re liability High performance graphics card with two or four display outputs DUAL or QUAD additional output for control monitor A special desktop allows fast access to the most important functions See Wings Engine Desktop Generation of test images on all outputs facilitates alignment of video projectors or displays See Displaying t
21. d prevents thermal shock and condensation Ambient temperature An ambient temperature range of 21 C 69 8 F to 23 C 73 4 F is optimal for server reliability At 22 C 71 6 F it is easy to maintain a safe relative humidity level Operat ing in this temperature range provides a buffer if the environmental support systems fail Relative Humidity Ambient relative humidity levels between 45 and 50 are the most suitable for data processing operations in order to e Prevent corrosion e Provide an operating time buffer in the event of environmental control system failure e Help avoid failures caused by the intermittent interference from static discharg es that occur when relative humidity is too low Airflow Considerations e Ensure unobstructed airflow through the chassis e Ensure that air enters at the front of the server housing and exits at the back e Ensure that ventilation openings such as cabinet doors for both the inlet and exhaust of the server provide minimum open area of 460 cm 71 3 in each e Take care to prevent recirculation of exhaust air within a rack or cabinet e Manage cables to minimize interfering with the server exhaust vent Wings Engine Play Install Technical Data of Wings Engine Stage Physical Specifications Description Metric Width 485 mm Depth 673 mm Height 221 mm Weight approximate 33 kg Environmental Specifications Description Temperature Operating seal
22. dvisable to change the administra tor password as described in the manual in item Backup Manager Administration 41 Wings Engine Play Install Deleting a snapshot Use Delete to delete snapshots that are no longer needed If there are any snapshots that refer to the snapshot to be deleted the child snapshots will be deleted as well Delete Snapshot Attention All child snapshots will b deleted as well Backup Manager Administration Click Manage System Images to open the administration view Click Import New System Image to import new system images delivered by AV Stumpfl Also the GUID of the Backup Manager and the operating system can be changed here Attention Changing the GUID may prevent the system from starting correctly Min wings engine Backup Manager GUID of Operating System v GUID of Backup Manager MEREEEEEEEEESEEIEEENEEEESE V System Image AV Stumpfl Wings Engine Stage Factory Image V1 0 1 Snapshot Name Date Description Use Freeze Lock Delete First Child 4 7 2014 4 01 46 PM Ly AV Stumpfl Wings Engine Stage Factory Image 4 7 2014 4 01 54 PM V1 0 1 DO m Free Disk Space on C fft 83 86 GB free 35 38 GB of totally 119 24 GB used E Teamviewer 21 Network Settings n J E Restart o Shutdown Wings Engine Backup Manager 12 5 0 from 4 3 2014 10 40 53 AM 42 Wings Engine Backup Manager Import New System Image System Image Name Image Description Paren
23. e Play Install Settings Useful Programs When you click E in the bottom left Desktop corner followed by clicking on Useful Programs in the top of the dialog that pops up you can use the buttons to start a number of useful programs SOUS Ep E Ere TIERE Useful Programs ln Eirce show Black on Displays Show GUI x Ultra VNC a gt y S QO Aes LUA Development Team Viewer Viewer Server Notepad Tools L autostart ae Autostart pale I VLC Player Calculator BluescreenView CPU Z Crystal Disk Mark ale DPC Latency Video Card Stability Checker Test rn et Prime 95 Process Explorer R Taskmgr 5 Restart Shutdown e LUA Development Tools opens the LUA Development Tools in order to write Avio scripts 32 Settings Useful Programs TeamViewer opens the dialog for remote support and maintenance Clicking and checking the box next to Run at Startup starts TeamViewer along with the system and allows access at any time via the Internet Ultra VNC starts Ultra VNC to allow remote support on the LAN When Ultra VNC is active you can remote control the Wings Engine in the Avio Manager Notepad opens the text editor Notepad Firefox opens the web browser Mozilla Firefox 7 Zip opens the archiving program 7Zip VLC Player opens the VLC media player Media Info opens the Media Info tool This tool can also be opened by right clicking a media file in Windows Explorer
24. est pictures The support module TeamViewer allows remote access for remote maintenance and troubleshooting The configuration is protected i e you are able to make changes but the de fined configuration can be restored at any time using the Backup Manager Cer tainly you can also save and load your own configurations for particular applica tions Configurations can also be frozen i e you can make changes but the de fined configurations is restored again after a restart See also Wings Engine Ba ckup Manager There are three different models with two or four display outputs each Wings Engine Play the base model for shows and installations Wings Engine Install as above but with live video input Wings Engine Stage the top model for highest demands with regard to per formance and sturdyness Wings Engine Play Install Note Please note that the dual models cannot be extended by means of external dongles Detailed information on the features of the various models can be found in a table in the Wings AV Suite Help pages Operating conditions and technical data In order to guarantee proper operation make sure that the following operating condi tions prevail for the Wings Engine Important note When you receive your server place it in the environment where you will install it Leave the server in its shipping crate at its final destination for 12 hours and do not connect it to the power supply This resting perio
25. evel to 1000m 5 C 41 F to 30 C 86 F above 1000m decrease maximum allowable temp by 1 C 300m 33 8 F 984ft 10 to 80 RH 27 C 80 6 F maximum wet bulb noncondensing 3000m 0 08 G z axis 0 06 G x y axis 5 500Hz swept sine Relative Humidity Altitude Vibration Power Source Requirements Description AC input voltage range Maximum operating input current at 115VAC Maximum operating input current at 240VAC Maximum standby power Idle AC input power Maximum AC input power Peak AC input power Caloric Value Description Idle Operating Max US 19 inch 26 5 inch 8 7 inch 73 Ibs Nonoperating 20 C 4 F to 60 C 140 F 90 RH 35 C 95 F maximum wet bulb noncondensing 12000m 0 3 G z axis 0 15 G x y axis 5 500Hz swept sine Specification 100 264 VAC 47 63 Hz 10A 5A 6 W without Accessories connected 180 W 700 VA 1020 VA Specification 172 8 kcal 725 kJ 604 8 kcal 2540 kJ Every warranty claim becomes inapplicable with non compliance of the operating and maintenance instructions from AV Stumpfl or if the purchaser or third parties perform technical modifications or other interventions without prior approval of the supplier Front and Rear Views and ports ECHO HER Sadesase Reseseseseses stumpfl wings enginef Men wings ERIT fT wll fa gu a U 5 eg LI f f a S 1 USB 2 0 interface 2 USB
26. how to DISPLAY A to D OUT 2 and optionally an additional control monitor to MONITOR OUT 1 Connect your audio system to port MAIN 1 2 or LINE 1 2 3 Using switch 6 switch the power supply unit to Il when you are using the standard cable and to I when you are using a powerCON cable DISPLAY A OUT DISPLAY B OUT omne 3 DISPLAY C OU DISPLAY D OUT om B EH em MONITOR OUT oo 6 Wings Engine Stage Quick Start ed stumpfl wings engine wingss agine E v1 fly fA Z U b ees LU LIU u l 4 8 Start the Wings Engine via pushbutton 8 Following this the desktop will be displayed With Wings Vioso being the central presentation tool click the icons to start the corresponding applications After starting up Wings you can create a multidis play project and design a show See Creating a multidisplay show via one com puter in the help topics Info If Wings Visos is to start up automatically after starting the Wings En Settings gine click followed by clicking Wings Vioso and place a checkmark next to Start Wings on System Startup There are various options for loading and starting certain shows See Global Options Program start in the help topics Basic alignment of the video projectors is possible via the Wings Engine test im GX Alignment age generator by clicking on the desktop See also Displaying test images Wings Engine Desktop
27. ltered by Windows e g due to faulty sound card detection Trigger Scheduler for enabling and disabling the Trigger Scheduler available with Pro Licenses and up not supported by additional licenses e Disable disables the Trigger Scheduler e Enable always enables evaluation of conditions and executes the triggers that fulfil these conditions See also Trigger functions See also Trigger functions in the help topics e Restore last exit state restores the setting that was active when the pro gram was exited last e Under Slave you can select the following options e After choosing Slave in the dialog above you can enter the Master IP ad dress at Master IP Address e f you enable Backup master IP address you can specify a second master as backup Should the first master fail the slaves will automatically link up with the back up master e Show Log Files shows the content of the Wings log file Info The settings below under Master or Slave correspond to the Wings Op tions See Global Options Program start and NetworkProgram start and Netzwork in the Wings help topics Saving and loading the settings The settings can be written directly to the INI file by clicking Save Settings so that they are taken over by Wings Click Reload Settings to read the settings made in the Wings Options This is usually done automatically when the dialog is opened making any manual loading usually unnecessary 31 Wings Engin
28. ng system to start or press TAB to select a tool Use the arrow keys to highlight your choice then press ENTER ings Engine Backup Manager gt AV Stumpfl Wings Engine Stage Factory Image To specify an advanced option for this choice press F8 Tools windows Memory Diagnostic ENTER Choose TAB Menu ESC Cancel Select the Wings Engine Backup Manager and press Enter following which the Backup Manager is opened 38 Wings Engine Backup Manager Win wings engine Backup Manager System Image AV Stumpfl Wings Engine Stage Factory Image Creation Date 4 7 2014 4 01 46 PM Change Date 4 9 2014 10 24 36 AM Description 1 0 1 xx Manage System Images Create New Snapshot Snapshot Name Date Description Use Freeze Lock Delete First Child 4 7 2014 4 01 46 PM L gt AV Stumpfl Wings Engine Stage Factory Image 4 7 2014 4 01 54PM 1 0 1 m Free Disk Space on C 83 86 GB free 35 38 GB of totally 119 24 GB used ei Teamviewer 4 Network Settings _ e aS gt Restart 0 Shutdown Wings Engine Backup Manager 12 5 0 from 4 9 2014 10 40 53 AM The system initially comes with two snapshots A First Child which cannot be edited and corresponds to the factory setting Derived from the First Child is the AV Stumpfl Engine Factory Image which is the first editable snapshot Creating a new snapshot Use Create New Snapshot to create a new snapshot The new snapshot must refer to an existing sn
29. ng you to leave a message with your e Company name e Name e Telephone number e Dongle or customer number on the answering machine and we will call you within one hour AV Stumpfl GmbH Mitterweg 46 A 4702 Wallern Tel 43 7249 42811 Fax 43 7249 428114 E mail support AVstumpfl com Internet http www AVstumpfl com 4 Wings Engine Play Install Camera based calibration for multidisplay projection was developed by our partner VIOSO VIOSO GmbH Ronsdorferstr 77a D 40233 Dusseldorf Tel 49 211 544 75 33 0 Fax 49 211 544 75 33 33 E Mail info vioso com Internet www vioso com For some functions we work as a licensee for the following companies For the Timestretching Functions we use DIRAC Time Stretch Pitch Shift technology licensed from The DSP Dimension http www dspdimension com Developed and c 2005 Stephan M Bernsee For decoding and encoding MPEG and H 264 videos and for Video DVD functionality we use codecs and software by C MAIN CONCEPT MainConcept Copyright 2003 2009 MainConcept AG 48
30. s EDID Please note that this EDID file may contain presets that are not supported by your device e Any previously saved EDID of a device can usually be found in folder C AVStumpfl EDID My EDIDs 3 Disconnect the display unless you have already done so and click Yes proceed Wait until the message appears that the EDID has been loaded and that you can connect the display You do not need to connect the displays until the EDIDs for all displays have been loaded 4 Proceed likewise for all the remaining displays and load the desired EDIDs Following this reconnect the monitors and projectors 22 Loading and saving EDID for outputs Now you can connect and disconnect displays or projectors without the system react ing to it and without giving reasons for changing the display assignment Attention WM the system now no longer reacts to disconnected displays dialogs may appear on monitors that are no longer connected which however have previously been closed on this monitor In such a case you need to reconnect the missing monitors or projectors Saving EDIDs 1 To start with do not connect any displays Only one control monitor may be Settings connected to port MONITOR OUT Start the Wings Engine Click and open the EDID Manager 2 If displays Ato D have a green checkmark EDIDs have been loaded that need to be removed to start with For Display A click Unload and confirm disconnection of the display by clicking Yes
31. set up the test image in accordance with your requirements click button Pattern Settings at the top following which another dialog pops up Pattern Settings Draw Lines Lines Pixel Vertical 105 Erro Honzontal 105 Euro Draw Center Circle Draw Full Ellipse Draw Crosses Pivel Top 200 are Left 200 Barre lll Draw Background 3 This dialog allows configuration of the test image as follows e Choice between black or white grid lines e Draw Lines produces a grid with the specified grid division The grid di vision can optionally be entered in lines number of lines or in pixels dis tance between the lines in pixels 13 Wings Engine Play Install e Draw Center Circle produces a center circle e Draw Full Ellipse produces an ellipse which touches the edges of the image e Draw Crosses produces diagonal lines in the overlap areas specified be low Entries can optionally be made in or in pixels e Draw Background produces grayscale or color stripes in the back ground Below you will find a few examples Grid with ellipse and circle as well as diagonals in the overlap areas on the left and right 14 Sound interface of Wings Engine Stage Wings engine Grayscale with simplest grid 1920 X 1080 stumpfis Primary and secondary colors as well as white and black stripes 4 To terminate the test image generator click the small cross at the top right cor
32. t VHD File Pf P First Child VHDFilee el Ex i Don t import J The administration view is password protected As delivered the password is AVStumpfl The password can be changed after clicking the toothed wheel Password Request ir x Please type in the Backup Manager password Change Backup Manager Password Old password New password Confirm new password E Cancel 43 Wings Engine Play Install TeamViewer Support Module Click TeamViewer to start the TeamViewer Support Module It allows access to the Backup Manager by AV Stumpfl after providing the TeamViewer ID to the support person This function can only be used with a working internet connection Network Settings Click Network Settings to define the network settings for the Backup Manager These network settings refer to the Backup Manager and may differ from your system set tings Edit Network Settings Network Card Local Area Connection Intel R 82379 V Giga Use DHCP Current IF Address 30 4 o 18 104 0 18 subnet VETE I T 0 255 0 0 0 Gateway IIT1T7 10 4 0 1 Cancel The 44 Trouble shooting If Wings Engine does not start up try starting it in secure mode 1 Start the Wings Engine and hit the F8 key whenever the display on the control monitor changes 2 If the next step is a Boot Device query both SSDs must be displayed and the smaller XLR_EX060BB 57241 MB
33. the slaves is to start as soon as the connection to the slaves has been established but at the latest after the timeout has expired This period should allow the slaves to safely establish a connection with the master Transfer Project to Slaves transfers the project to the slaves after the timeout period specified above has expired If a slave within the network is not active the project is still transferred to all other slaves This function can only be se lected if Wait for Slave Connections has been enabled Transfer media files to slaves as above but only the corresponding media files required by a slave are transferred i e only the data minimum is trans ferred If a slave within the network is not active all other slaves are still sup plied with data This function can only be selected if Wait for Slave Connections has been enabled Autoplay Timeline Remote Index automatically starts the presentation in the timeline with the specified remote index at the position marker with remote in dex 1 If the specified timeline and the position marker with the remote index 1 are not available this action cannot be performed Settings Useful Programs Enable Device Ports ensures that the device ports are enabled for a project to be auto started after the Wings Platinum start up See also Enable Device Ports in the Wings Vioso help system Adjust Sound Card Assignment makes sure that the current allocation of sound card outputs is not a
34. ure and faultless opera tion An EDID should always be loaded to guarantee a stable display as signment In the delivery state a standard EDID is loaded offering a varie ty of different modes which usually works in most cases Further infor mation is available at Saving and loading EDID for outputs 3 After you have made the required modifications you click Apply Changes While the changes are applied the displays will be flickering and it may take a few sec onds until the required changes have been made Ed Further functions such as rotation of displays can be found in the NVidia Control Center See also Settings Shortcuts 20 Loading and saving EDID for outputs To ensure that the display allocation remains the same when motors and projectors are connected and disconnected you should save the EDID of the display device and load it to the graphics card As an alternative you can also load the supplied standard EDIDs Wings Engine Stage offers the following functions for this e Loading EDID e Saving EDID e Please note that the image on the monitor will start flickering and disappear briefly upon executing functions Load Unload or Reset In this case you just need to wait until the normal image has reappeared e By clicking Reset you can load the suitable standard EDID for your monitor or projector Usually this works quite well Loading EDIDs 1 To start with do not connect any displays Only one control monitor may
35. use mode e Yellow slave is active e g file transfer e Red Error Network connection not ok The checkboxes in the title bar have the following functions e Show Black On Displays turns the desktop background black e Show GUI shows the Wings Engine user interface After unchecking this box you can reactivate the interface via the little monitor icon m at the top right desktop corner 28 Wings Settings At the left desktop side click E d and in the dialog popping up click on Wings Settings at the top Here you can define the options for the Wings program start They differ for master and slave mode i e by choosing the correct start mode the appropriate configuration is loaded automatically Shortcuts Wings Vioso Administrator Show Black on Displays Show GUI x Master Slave Settings N r w this applies either when Autostart is activated or when user dicks on the Wings Vioso symbol art as aste g y Start Wings on System Startup Startup Delay 50 sec Master amp Slave Master Slave Default Autostart Default Autostart Ignore Last Autosave Status Enable All Warnings Master Startup Options Te Wait for Slave Connections Timeout min Transfer Project to Slaves Transfer Media Files to Slaves Autoplay Timeline Remote Index 1 from Position Marker 1 Enable Device Ports Adjust Sound Card Assignment Trigger Scheduler Slave Master IP Address Backup Master IP Address S
Download Pdf Manuals
Related Search