Omni WA-36 - Pro Audio Centre
Contents
1. Flash frequency 00 99 00 low 99 high 2 DMX Addressing mode To access the DMX address mode press the MODE button to show DMX512 MODE on the LCD display Now press the SETUP button to set the desired DMX address from 001 512 using the UP and DOWN buttons Follow the DMX channel assignment and function table below In this mode the CT Colour Temperature displays the actual colour temperature set by the DMX controller 3 Slave mode Link the units together using a 3 pin XLR DMX cable then press the MODE button on the slave unit s to show SLAVE MODE on the LCD display The Slave units will now follow in sequence with the Master unit 4 Dimming mode In this mode you can set the desired light output of any of the two colours white or amber to create a dynamic static colour First press the MODE button to show DIMMING MODE on the LCD display Press the SETUP button to set the desired light output for the white LEDs using the UP and DOWN buttons Now press the SETUP button for a second time to set the desired light output for the amber LEDs using the UP and DOWN buttons Finally press the SETUP button for a third time to select the desired flash frequency using the UP and DOWN buttons White LED Output 00 99 00 low 99 full Amber LED Output 00 99 00 low 99 full Flash frequency 00 99 00 low 99 high Note Always p2. www prolight co uk Omni WA 36 Order code LEDJ151 Black Order code LEDJ152 White USER MANUAL LEDJ Omni WA 36 Safety WARNING FOR YOUR OWN SAFETY PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START UP CAUTION Keep this equipment away from rain moisture and liquids SAFETY INSTRUCTIONS Every person involved with the installation operation amp maintenance of this equipment should Be competent Follow the instructions of this manual CAUTION TAKE CARE USING THIS EQUIPMENT HIGH VOLTAGE RISK OF ELECTRIC SHOCK Before your initial start up please make sure that there is no damage caused during transportation Should there be any consult your dealer and do not use the equipment To maintain the equipment in good working condition and to ensure safe operation it is necessary for the user to follow the safety instructions and warning notes written in this manual Please note that damages caused by user modifications to this equipment are not subject to warranty LEDJ Omni WA 36 Safety IMPORTANT The manufacturer will not accept liability for any resulting damages caused by the non observance of this manual or any unauthorised modification to the equipment e Never let the power cable come into contact with other cables Handle the power cable and all mains voltage connections with particular caution e Never remove warning or informative labels from the equipment e
3. Do not open the equipment and do not modify the equipment e Do not connect this equipment to a dimmer pack e Do not switch the equipment on and off in short intervals as this will reduce the system s life e Do not expose to flammable sources or gases e Always disconnect the power from the mains when equipment is not in use or before Only handle the power cable by the plug Never pull out the plug by pulling the power cable e Make sure that the available voltage is between 220v 240v e Make sure that the power cable is never crimped or damaged Check the equipment and the power cable periodically e If the equipment is dropped or damaged disconnect the mains power supply immediately Have a qualified engineer inspect the equipment before operating again e If your product fails to function correctly discontinue use immediately Pack the unit securely preferably in the original packing material and return it to your Prolight dealer for service e Only use fuses of same type and rating e Repairs servicing and power connection must only be carried out by a qualified technician THIS UNIT CONTAINS NO USER SERVICEABLE PARTS e WARRANTY One year from date of purchase OPERATING DETERMINATIONS If this equipment is operated in any other way than those described in this manual the product may suffer damage and the warranty becomes void Incorrect operation may lead to danger e g short circuit burns electric shocks lamp fa
4. ilure etc Do not endanger your own safety and the safety of others Incorrect installation or use can cause serious damage to people and property LEDJ Omni WA 36 Technical specifications You should find inside the LEDJ carton the following items 1 Omni WA 36 2 Instruction manual 3 Power cable Technical Specifications DMX channels 5 400Hz flicker free 3W LEDs Power supply AC 240 50Hz 36 x Mega Bright 3W LEDs W 24 A 12 4 push button LCD display Power Consumption 118W Beam angle 30 degrees Dimensions 183 x 306 x 330mm Weight 6 1Kgs Operating modes 1 Auto run 2 Manual 3 DMX 4 Slave 5 Dimming O Overview ZZ IR EB SS A AA SS Ze IX SFS SS CZ IH Z S 2 www prolight co uk Power in Power out DMX In DMX Out O 1 DMX input 2 DMX output 3 LCD display 4 Power input 5 Power output 6 Mode selection button 7 Set up button 4 5 2 8 Function up button 9 Function down button LEDJ Omni WA 36 Operation Operations 1 Auto run mode To set the unit in the Auto run mode press the MODE button to show AUTO RUN MODE on the LCD display Now press the SETUP button and use the UP and DOWN buttons to select your desired speed setting Press the SETUP button for a second time to select the desired flash frequency using the UP and DOWN buttons Speed setting 00 99 00 slow 99 fast
5. ress the SETUP button a final time to confirm the setting 5 Channel DMX chart O a 0 255 Preset colour temperatures 1 16 levels 1 Be Beck LEDJ Omni WA 36 Notes Notes Gd CREATE THE RIGHT EFFECT www prolight co uk
Download Pdf Manuals
Related Search