IP Office Interface Type : IP Configuration in Avaya IP Office
Contents
1. on interface pc by going to start menu run option and giving the below commands regsvr32 c windows syswow64 msrdo20 dl1l regsvr32 c windows syswow64 mswinsck ocx regsvr32 c windows syswow64 msflxgrd ocx Interface Implementation procedure for CDR Call billing LInk On the IDS Interface PC on our network rig up the following 1 Create a folder called IDSTEL in C with a subfolder in it called ALERT 2 create a file called appam dat using edit in idstel folder I e Open a file by name appam dat from command prompt and save it into c idstel verify th 3 Ensure at this file exists that Fortune Next6iclient Fortune Next 6i dll 4 ask the Avaya pabx engineer to give us flushout of only Outgoing call on IP lin to us 5 copy th folder 6 Start the Avaya IP Office IP to Commun Give the arli k He shoul e Avaya IP Office IP is installed on this PC Register all ls on this PC S ld disable the sending of incoming and internal calls Based CDR Interface Program into c idstel Based CDR Interface Program You will come ication parameter screen SAME press IP port number which was when you were capturing the calls and then press Next it will ask for the IP address Give the SAME r given in hyperterminal when you were capturing th nter key arlier given in hyperterminal nter key IP address which was e calls and2. then Choose the Live path drive which is the drive in which you have installed Fortune6iclien t on this interface pc For example if fortune6iclient folder is existing on D drive on the interface PC then choose D and click on OK Th e Interface program will internally connect to the live pms db The Parameters for call billing link will be written into c idstel pmsphn sys Note IP address you earlier using 7 Make some ou program screen idstel folder Implement the Posting program section 8 ensure that your telephone parameters ar tgoing calls Call If you are not aware of the above values for IP port number and can ask your pabx engineer who had captured the calls hyperterminal s will get displayed on the Interface and will get collected into a file called guiphn dat under see Telpost implementation rigged up properly prior to Posting Implementation Author Jairam Shenoy M
3. PABX Brand Avaya Model IP Office Interface Type IP Configuration in Avaya IP Office SMDR protocol on IP for Call Billing configuration Note This Avaya IP Office CDR SMDR Link protocol is propreitary to Avaya IP Office and is a NON HTNG protocol valid for interfacing Avaya IP Office with PMS at the property Features supported on the CDR Interface with Avaya IP Office Call Billing How to Implement the Avaya IP Office IP Based CDR Link Interface with Fortune Range of products The CDR IP based interface links should be connected from the pabx to the hub switch from where the network cable will come to our IDS Interface PE Pre requisites Case 1 If the IDS Interface PC has 32 bit operating system then goto c windows system32 folder and delete off existing msrdo20 dll mswinsck ocx and msflxgrd ocx copy the attached msrdo20 dll mswinsck ocx and msflxgrd ocx into c windows system32 and register these files on interface pc by going to start menu run option and giving the below commands regsvr32 c windows system32 msrdo20 dl11 regsvr32 c windows system32 mswinsck ocx regsvr32 c windows system32 msflxgrd ocx Case 2 If the IDS Interface PC has 64 bit operating system then goto c windows syswow64 folder and delete off existing msrdo20 dll mswinsck ocx and msflxgrd ocx copy the attached msrdo20 dll mswinsck ocx and msflxgrd ocx into c windows syswow64 and register these files
Download Pdf Manuals
Related Search