Avaya ABT-34-ABT-35.ai
Contents
1. Avaya ABT 34 ABT 35 Bluetooth Headset Systems Pairing D Speak volume fine adjust buttons listen volume adjust button Call control button amp PAIRING HEADSET AND BASE talk on line indicator light The ABT 34 ABT 35 Bluetooth Headset Systems are supplied with the headset and base unit factory paired to each other However if you have purchased a base unit separately or if you wish fo use a replacement headset with your existing base unit the units must be paired as follows 1 On the base press and hold both speak volume fine adjust buttons until the blue talk on line indicator light and red power indicator light on the front of unit start to flash 2 On the headset press and hold the listen volume adjust button and call control button until the status indicator flashes red and blue 3 Pairing is complete when the talk on line indicator on base illuminates solidly and the status indicator light on headset flashes blue Status Important Make sure your headset is not indicator connected to any other Bluetooth device light when attempting to pair Listen volume adjust button Call PAIRING HEADSET AND MOBILE PHONE Before using your headset for the first time with your Bluetooth mobile phone or cnn device you must pair it with indicator that device To pair follow control button light these steps 1 Turn on mobile phone Place headset in pairing mode by simul2. taneously pressing and holding listen volume adjust button marked volume up and call control button for 2 seconds When status indicator light flashes red then blue release the buttons 2 Use your phone s menu to search for Bluetooth audio devices and select ABT 35H when it appears on the display Note In some circumstances the pairing process can take up to two minutes to complete 3 When the phone display asks for a passkey enter 0000 Status indicator flashes blue once the haa is successfully paired If pairing fails try again starting with Step 1
Download Pdf Manuals
Related Search