(Flat Design) - Instructions
Contents
1. Panel Set Avalon CHECK CONDITION OF SHIPMENT Upon receipt of this kit check the condition of the packaging Damage to the package should be noted on the carrier s freight receipt Any damage claims as a result of shipping must be handled through the shipper Travis Industries will provide assistance in resolving shipping claims or replacing items not included in the package Please report any missing items immediately COMPATIBILITY e Avalon Pendleton e Avalon Rainier e Avalon Olympic ITEMS NEEDED FOR ASSEMBLY e 5 16 and 3 8 Nutdriver e Small amp Large Standard Screwdriver e Drill with 11 64 Bit PACKING LIST e Top Panel e Two Side Panels e Trim amp hardware e 4 10 24 Type F Thread Cutting Screws e 7 Spring Clips PANEL SIZING and PART NUMBERS Model Size Size Installed including trim Black Trim Pendleton 745 790 8 39 7 8 wide by 28 high 99300300 Pendleton 745 790 10 43 7 8 wide by 30 high 99300301 Pendleton 745 790 12 47 7 8 wide by 32 high 99300302 Rainier 945 990 8 41 3 4 wide by 28 7 8 high 99300306 Rainier 945 990 10 45 3 4 wide by 30 7 8 high 99300307 Rainier 945 990 12 49 3 4 wide by 32 7 8 high 99300308 Olympic 1190 8 45 1 4 wide by 28 7 8 high 99300312 Olympic 1190 10 49 1 4 wide by 30 7 8 high 99300313 Olympic 1190 12 53 1 4 wide by 32 7 8 high 99300314 INSTALLATION INSTRUCTIONS 1 With the insert 12 from the fire2. place install the side surround panels see the directions below Avalon Pendleton 45 and Rainier 45 Remove the brass trim along the top of the stove Attach the side panels with the included screws hint i pre thread the holes prior Ss Button Plugs 010 to installing the panels pry out with a screwdriver gt E 5 16 Nutdriver Travis Industries Page 1 of 2 Printed 11 4 05 Panel Set Avalon 2 Adjust the position of the side panels so they are 1 flush with the bottom of the insert 2 both the same distance back from the front of the insert 3 perpendicular to the floor use the top panel if necessary to judge alignment Tighten the screws that hold the side panels in place 3 Place the insert into the fireplace and connect the flue if using a positive or direct connection Install the top panel and trim following the directions below n Ic St Micro 1 16 gt wW 5 16 Nutdriver LD Standard A Q Screwdriver Spring s Clips fos p Top Top Trim UUAN CCC Install the top panel so the tabs insert into the joggle clips on the top panel Travis Industries Page 2 of 2 Trim ee Bracket se Trim Installation Co Right Side X Trim E Insert one leg of each L bracket into the top and side trim piece Align the trim to form a precise corner then tighten the two set screws with a small standard screwd
3. river Slide the trim over the panels Place the spring clips behind the panels at the locations shown This keeps the trim tight against the panel xo Optional Knock Out An optional knock out is provided on both sides if the power cord is routed behind the surround panel Printed 11 4 05
Download Pdf Manuals
Related Search