JVC KS-FX280 Cassette Player
Contents
1. Static noise while listening to the radio NO CP or NO DISC appears on the display RESET 8 appears on the display RESET 1 RESET 7 appears on the display The unit does not work at all The CD changer does not work at all Remedies Causes You have tried to insert a cassette in the wrong way This is not a malfunction Insert the cassette with the exposed tape facing right The tape head is dirty Clean it with a head cleaning tape Check the cords and Connections are not good connections The volume control is turned Adjust it to the optimum level to the minimum level connections Signals are too weak Store stations manually The antenna is not connected Connect the antenna firmly firmly No CD is in the magazine Insert CDs into the magazine CDs are inserted incorrectly Insert them correctly Connect this unit and the CD changer correctly and press the reset button of the CD changer This unit is not connected to a CD changer correctly Press the reset button of the CD changer Press 0 I ATT and SEL at the same time for more than 2 seconds to reset the unit The clock setting and preset stations stored in memory are erased See page 2 The built in microcomputer may function incorrectly due to noise etc AUDIO AMPLIFIER SECTION Maximum Power Output Front 45 W per channel Rear 45W per channel Continuous Power Outp2. 5 A Ej E pel 20 SCM indicator 7 TAPE gt button 21 Volume or audio level indicator S aad wy eI A Duane 22 MO Monaural indicator e Also functions as SSM buttons when S1 Stereo indicator pressed together 23 LOUD indicator 9 button 24 RND Random indicator 10 DISP Display button 2 Band indicators 11 Remote sensor FM1 FM2 FM3 12 MO Monaural button AM o 13 RPT Repeat button 26 CD CH CD Changer indicator 14 RND Random button 27 TAPE indicator 15 Number buttons 28 OY 16 MODE button 29 RPT Repeat indicator 17 SCM Sound control memory button Using the remote controller 1 Functions the same as the 0 I ATT button on the main unit 2 Functions as the BAND button while listening to the radio Each time you press the button the band changes Functions as the DISC button while listening to the CD changer Each time you press the button the disc number increases and the selected disc starts playing Functions as the PROG button while listening to a tape Each time you press the button the tape direction changes alternately Co DD e Functions as the PRESET button while listening to the radio Each time you press the button the preset station number increases and the selected station is tuned in Functions as the DISC button
3. AM and TAPE 2 Select LEVEL if not shown on the display 18 AF Detaching the control panel How to attach the control panel insert the left side of the control car anel holder When detaching or attaching the control panel be P careful not to damage the connectors on the back of the control panel and on the panel holder How to detach the control panel Before detaching the control panel be sure to turn off the power Unlock the control panel 2 Press the right side of the control panel to fix it to the panel holder 2 Lift and pull the control panel out of the unit Note on cleaning the connectors If you frequently detach the control panel the connectors will deteriorate To minimize this possibility periodically wipe the connectors with a cotton swab or cloth moistened with alcohol being careful not to damage the connectors 3 Put the detached control panel into the provided case Connectors E 9 g Z T 19 ENGLISH 20 CD CHANGER OPERATIONS O 1 ATT i RPT 12 RND Read this section only when you used with a JVC CD automatic changer separately purchased We recommend that you use one of the CH X series with your unit If you have another CD automatic changer consult your JVC car audio dealer for connections For example if your CD automatic changer is one of the KD MK series you need a cord KS U15K for connect
4. embalado en el estuche duro 2 Retire la placa de guarnici n J Retire la manga despu s de desenganchar los retenes de la cubierta D Ponga la unidad vertical Nota Al poner la unidad vertical tenga cuidado de no da ar el fusible provisto en la parte posterior 2 Inserte las dos asas entre la unidad y la cubierta tal como en la ilustraci n y desenganche los retenes de la cubierta 3 Retire la cubierta Nota Despu s de instalar la unidad aseg rese de guardar las asas para uso futuro 4 Instale la cubierta en el tablero de instrumentos Despu s de que la manga est correctamente instalada en el tablero de instrumentos doble las leng etas correspondientes para sostener la cubierta firmemente en su lugar tal como se muestra 5 Fixe el perno de montaje ou la parte trasera del cuerpo de la unidad y coloque el coj n de goma sobre el extremo del perno 6 Realice las conexiones el ctricas requeridas en base a las explicaciones que figuran en la parte de atr s de estas instrucciones Deslice la unidad dentro de la cubierta hasta que quede trabada 8 Coloque la placa de guarnicion Y Coloque el panel de control Sleeve Cubierta Handle Manija Poign e Cubierta Manchon Fusible Lock plate Slot FUsible Placa de bloqueo Ranura Plaque de verrouillage Fente TROUBLESHOOTING The fuse blows Are the red and black leads connected correctly Power cannot be turn
5. o l Z TT Design and specifications subject to change without notice If a kit is necessary for your car consult your telephone directory for the nearest car audio speciality shop 2 http TP jvc mo bile com Visit us on line for Technical Support amp Customer Satisfaction Survey US RESIDENTS ONLY Having TROUBLE with operation Please reset your unit Refer to page of How to Reset Still having trouble USA ONLY Call 1 800 252 5722 http www jvc com We can help you VICTOR COMPANY OF JAPAN LIMITED J EN SP FR 1101KKSFLEJEIN ff KS FX280 Installation Connection Manual Manual de instalaci n conexi n Manuel d installation raccordement GET0061 002A J ENGLISH e This unit is designed to operate on 12 V DC NEGATIVE ground electrical systems INSTALLATION IN DASH MOUNTING e The following illustration shows a typical installation However you should make adjustments corresponding to your specific car If you have any questions or require information regarding installation kits consult your JVC car audio dealer or a company supplying kits 1 Before mounting Press LA Control Panel Release to detach the control panel if already attached When shipped from the factory the control panel is packed in the hard case 2 Remove the trim plate 3 Remove the sleeve after disengaging the sleeve locks 1 Stand the unit Note When you stand the unit
6. repeat while still in the functions mode so that the RPT indicator lights up on the display Then each time you press RPT the repeat play mode Qe changes as follows 7 RPT1 RPT2 gt Canceled i Repeatt Repeat2 MODE ES 1 RPT RO Mode Plays repeatedly Indicator RPT1 The current track or specified track RPT2 Flashes All tracks of the current disc or specified disc 21 ER EXTERNAL COMPONENT OPERATIONS V CD CHANGER CONTROL N Ti RPT 12 RND I o g Z T You can connect the external component to the CD to use When shipped from the factory CD changer jack on the rear using the Line Input changer is selected as the external component Adaptor KS U57 not supplied LINE IN To use the external component other than CD changer Preparations CHANGER To use the CD changer For connecting the Line Input Adaptor KS U57 and the external component refer to the Installation Change the source to FM AM or TAPE Connection Manual separate volume Before operating the external component using the 8 following procedure select the external input correctly See Selecting the external component to use on page 22 ma Select the external component TA If LINE IN does not appear 2 Press and hold SEL for more than 2 seconds BA on the display see page 22 CLOCK H CLOCK M C and select the externa
7. be careful not to damage the fuse on the rear 2 Insert the 2 handles between the unit and the sleeve as illustrated to disengage the sleeve locks 3 Remove the sleeve Note Be sure to keep the handles for future use after installing the unit 4 Install the sleeve in the dashboard After the sleeve is correctly installed in the dashboard bend the appropriate tabs to hold the sleeve firmly in place as illustrated 5 Fixthe mounting bolt to the rear of the unit s body and place the rubber cushion over the end of the bolt 6 Dothe required electrical connections explained on the back of this instructions Slide the unit into the sleeve until it is locked 8 Attach the trim plate 9 Attach the control panel j ESPA OL e Esta unidad est dise ada para funcionar con 12 V de CC con sistemas el ctricos de masa NEGATIVA INSTALACION MONTAJE EN EL TABLERO DE INSTRUMENTOS e La siguiente ilustraci n muestra una instalaci n t pica Sin embargo usted deber efectuar los ajustes correspondientes a su autom vil Si tiene alguna pregunta o necesita informaci n acerca de las herramientas para instalaci n consulte con su concesionario de JVC de equipos de audio para autom viles o a una compa a que suministra tales herramientas 1 Antes de instalar Pulse LA soltar panel de control para separar el panel de control si ya est unido Cuando se env a de la f brica el panel de control est
8. located and played back Press e lt WV briefly while playing a CD to go back to s the beginning of the current track Each time you press the button consecutively the beginning of the current tracks is located and played back To go to a particular disc directly 8 MO 9 10 1 RPT 12 RND Gp em Press the number button corresponding to the disc number to start its playback To select a disc number from 1 6 Press 1 7 6 12 briefly To select a disc number from 7 12 Press and hold 1 7 6 12 for more than 1 second Ex When disc number 3 is selected Disc number Mit itt Y CD CH N L Track number D CS Mode Selecting CD playback modes To playback tracks at random Random Play MODE 1 Press MODE while playing a CD This unit enters the functions mode 2 Press RND random while still in the functions mode so that the RND indicator lights up on the display Then each time you press RND the random play mode changes as follows X 9 g Z T 12 RND K RND1 RND2 gt Canceled Random1 Random2 RND Plays at random Indicator RND1 Lights All tracks of the current disc then the tracks of the next disc and so on RND2 Flashes All tracks of all discs inserted in the magazine To playback tracks repeatedly Repeat Play Press MODE while playing a CD This unit enters the functions mode Press RPT
9. Componente exter or Appareil ext rieur
10. Ecrou d arr t B Screw option Tornillo opci n Vis en option Mounting bolt Perno de montaje Boulon de montage Cubierta Manchon Removing the unit Extracci n de la unidad Before removing the unit release the rear section 1 Remove the control panel 2 Remove the trim plate J Insertthe 2 handles into the slots as shown Then while gently J Inserte las 2 manijas entre las ranuras como se muestra Luego separe gentilmente las manijas y extraiga la unidad Aseg rese de conservar las manijas despu s de instalarlo pulling the handles away from each other slide out the unit Be sure to keep the handles after installing it Parts list for installation and connection The following parts are provided with this unit After checking them please set them correctly Hard case Control Panel Sleeve Estuche duro Panel de control Cubierta Etui de transport Panneau de Manchon command Power cord Trim plate Cord n de alimentaci n Cordon d alimentation Placa de guarnici n Plaque d assemblage Handles Mounting bolt M5 x 20 mm Manijas Poign es Washer 95 Arandela 95 Rondelle 25 KE O 3 N N Y SY Lock nut M5 Tuerca de seguridad M5 Ecrou d arr t M5 cp e Antes de extraer la unidad libere la secci n trasera 1 Extraiga el panel de control 2 Retire la placa de guarnici n Lista de piezas para instalaci n y conexi n Con esta unidad se suministra
11. JVC MM CASSETTE RECEIVER RECEPTOR REPRODUCTOR DE CASSETTE RADIOCASSETTE KS FX280 X 9 g Z ui FRANCAIS ESPANOL For installation and connections refer to the separate manual Para la instalaci n y las conexiones refi rase al manual separado Pour l installation et les raccordements se r f rer au manuel s par INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D INSTRUCTIONS For customer Use Enter below the Model No and Serial No which are located on the top or bottom of the cabinet Retain this information for future reference Model No Serial No GET0061 001A J ENGLISH How to reset your unit Press and hold both the SEL Select and 1 ATT Standby On Attenuator buttons at the same time for several seconds This will reset the built in microcomputer M 1 ATT Standby On Attenuator SEL Select Note Your preset adjustments such as preset channels or sound adjustments will also be erased How to use the number buttons If you press MODE the unit goes into functions mode and the number buttons work as different function buttons MODE BS MO 9 10 i RPT 12 RND Time countdown indicator To use these buttons as number buttons again after pressing MODE wait for 5 seconds without pressing any number button until the functions mode is cleared Pressing
12. MODE again also clears the functions mode Thank you for purchasing a JVC product Please read all instructions carefully before operation to ensure your complete understanding and to obtain the best possible performance from the unit CONTENTS How to reset your unit 2 How to use the number buttons 2 LOCATION OF THE BUTTONS 4 Control DaHel u uisus ho e 4 Using the remote controller 5 Preparing the remote controller 6 BASIC OPERATIONS 1 Turning on the power 7 RADIO BASIC OPERATIONS 8 Listening to the radio oscars 8 Storing stations in memory 8 Tuning into a preset station 10 TAPE OPERATIONS 11 Listening to a cassette 11 Finding the beginning of a tune 12 Other convenient tape functions 12 SOUND ADJUSTMENTS 14 Turning on off the loudness function 14 Adjusting the sound 14 Using the sound control memory SCM 15 Canceling advanced SCM 15 Storing your own sound adjustments 16 BEFORE USE For safety Do not raise the volume level too much as this will block outside sounds making driving dangerous e Stop the car before performing any complic
13. ated operations OTHER MAIN FUNCTIONS Setting the clock Selecting the level display Detaching the control panel CD CHANGER OPERATIONS PUN ID osas Selecting CD playback modes EXTERNAL COMPONENT OPERATIONS 22 Selecting the external component to use 22 MAINTENANCE 23 TROUBLESHOOTING 24 SPECIFICATIONS 29 Temperature inside the car If you have parked the car for a long time in hot or cold weather wait until the temperature in the car becomes normal before operating the unit X 9 O Z T E LOCATION OF THE BUTTONS Control panel T o O Z T 21 22123 24 ETD A NN M1 ML WW MORND dfe M MN 9 see CD CH OM MW 25 2627 Display window p Q 7 8 MO 9 10 MODE n 3 TESSAN alo o E D e EV 1 Foy 9 foit 43 j is 16 1718 19 1 O I ATT Standby On Attenuator button 18 CD CH CD Changer button 2 LOUD Loudness button 19 LAJ Control panel release button 3 SEL Select button 4 Cassette compartment Display window
14. ately MODE 1 RPT Notes In the following cases the Multi Music Scan and Repeat function mechanisms may not operate correctly These are NOT malfunctions use the mechanisms to suitably accommodate the materials and situations e Tapes with tunes having long pianissimo passages very quiet parts or non recorded portions during tunes e Tapes with tunes recorded at low recording levels e Tapes with short non recorded sections e Tapes with high level noise or humming between tunes X 9 O Z T 13 Turning on off the loudness function The human ear is less sensitive to low and high frequencies at low volumes The loudness function can boost these frequencies to produce a well balanced sound at low volume level Each time you press LOUD the loudness function turns on off alternatively I o O Z T Coury LOUD rT L amem O ap lt a CHEN GEERC rt A Adjusting the sound You can adjust the treble bass sounds and the speaker balance Select the item you want to adjust 14 SOUND ADJUSTMENTS Indication To do Range BAS Adjust the bass 06 min Bass 06 max TRE Adjust the treble 06 min Treble 06 max FAD Adjust the front RO6 Rear only Fader and rear speaker balance FO6 Front only BAL Adjust the left LO6 Left only Balance and right speaker balance RO6 Right only VOL Adjust the volu
15. attery holder in the direction indicated by the arrow using a ball point pen or a similar tool 2 Remove the battery holder back side 1 2 Place the battery Slide the battery into the holder with the side facing upwards so that the battery is fixed in the holder Lithium coin battery product number CR2025 Return the battery holder Insert again the battery holder pushing it until you hear a clicking sound back side WARNING Store the batteries in a place which children cannot reach If a child accidentally swallows the battery immediately consult a doctor Do not recharge short disassemble or heat the batteries or dispose of in a fire Doing any of these things may cause the batteries to give off heat crack or start a fire Do not leave the batteries with other metallic materials Doing this may cause the batteries to give off heat crack or start a fire When throwing away or saving the batteries wrap in tape and insulate otherwise it may cause the batteries to give off heat crack or start a fire Do not poke the batteries with tweezers or similar tools Doing this may cause the batteries to give off heat crack or start a fire BASIC OPERATIONS 4 ENGLISH Turning on the power 3 Adjust the volume Turn on the power QO I ATT D a Note on One Touch Operation di i To decrease the volume When you select a source in step 2 bel
16. au de commande Dashboard Tablero de instrumentos Tableau de bord Rubber cushion Coj n de goma laf Amortisseur en caoutchouc mm AS Mounting bolt Perno de montaje Boulon de montage 6 See the back page for electrical connections Con respecto a las conexiones el ctricas consulte la p gina de atr s Voir le dos de cette page pour les connexions lectriques EN CAS DE DIFFICULTES e Le fusible saute Les fils rouge et noir sont ils racord s correctement e L appareil ne peut pas tre mise sous tension Le fil jaune est elle raccord e e Pas de son des haut parleurs Le fil de sortie de haut parleur est il court circuit Le son est d form Le fil de sortie de haut parleur est il la masse Les bornes des haut parleurs gauche et droit sont elles mises ensemble la masse L appareil devient chaud Le fil de sortie de haut parleur est il la masse Les bornes des haut parleurs gauche et droit sont elles mises ensemble la masse e When using the optional stay e Cuando emplea un soporte opcional e Lors de l utilisation du hauban en option Fire wall Tabique a prueba de incendios Cloison Stay option Washer Soporte opci n Ne miarigela O Hauban en option Dashboard Rondelle Tablero de instrumentos Lock nut Tableau de bord Tuerca de seguridad
17. avoz izquierdo frontal Haut parleur gauche avant Antes de la conexi n Verifique atentamente el conexionado del veh culo para no cometer errores al conectar esta unidad Una conexi n incorrecta podr a producir dafios graves en la unidad 1 Conecte los conductores de color del cable de alimentaci n a la bater a del autom vil altavoces y antena autom tica si la hubiere en la secuencia siguiente D Negro a tierra 2 Amarillo a la bater a del autom vil 12V constantes 3 Rojo a un terminal de accesorio 4 Azul con rayas blancas a la antena autom tica 200mA m x 5 Otros a los altavoces 2 Conecte el cable de antena 3 Por ltimo conecte a la unidad el cableado preformado s rie CH X JVC CD changer or another external component Cambiador de CD JVC u otro componente exterior Changeur CD JVC ou autre appareil Jaune Hed Rojo Blue with white stripe Azul con rayas blancas Bleu avec bande blanche White with black stripe White Gray with black stripe Gray Green with black stripe Green Purple with black stripe Purple Blanco con rayas negras Blanco Gris con rayas negras Gris Verde con rayas negras Verde P rpura con rayas negras Purpura Blanc avec bande noire Blanc Gris avec bande noire Gris Vert avec bande noire Vert Violet avec bande noire Violet Left speaker front Right speaker front Left speaker rear Right speaker
18. car battery otherwise the unit will be seriously damaged Connect the black lead ground yellow lead to car battery constant 12V and red lead to an accessory terminal correctly BEFORE connecting the speaker leads of the power cord to the speakers check the speaker wiring in your car If the speaker wiring in your car is as illustrated in Fig 1 and Fig 2 below DO NOT connect the unit using that original speaker wiring If you do the unit will be seriously damaged Redo the speaker wiring so that you can connect the unit to the speakers as illustrated in Fig 3 If the speaker wiring in your car is as illustrated in Fig 3 you can connect the unit using the original speaker wiring in your car f you are not sure of the speaker wiring of your car consult your car dealer PRECAUCIONES sobre las conexiones de la fuente de alimentaci n y de los altavoces e NO conecte los conductores de altavoz del cable de alimentaci n a la bater a de autom vil pues podr an producirse graves da os en la unidad e Conecte correctamente el conductor negro a tierra el conductor amarillo a la bater a del autom vil 12V constantes y el conductor rojo a un terminal de accesorio e ANTES de conectar a los altavoces los conductores de altavoz del cable de alimentaci n verifique el conexionado de altavoz de su autom vil Si el conexionado de altavoz de su autom vil es como se indica en las Figs 1 y 2 de aba
19. cesorio del bloque de fusibles Vers borne accessoire du porte fusible a gt L Altavoz izquierdo trasero Haut parleur gauche arri re RACCORDEMENTS ELECTRIQUES Pour viter tout court circuit nous vous recommandons de d brancher la borne n gative de la batterie et d effectuer tous les raccordements lectriques avant d installer l appareil Si l on n est pas s r de pouvoir installer correctement cet appareil le faire installer par un technicien qualifi Remarque Cet appareil est concu pour fonctionner sur des sources de courant continu de 12 V masse NEGATIVE Si votre v hicule n offre pas ce type d alimentation il vous faut un convertisseur de tension que vous pouvez acheter chez un revendeur d autoradios JVC e Hemplacer le fusible par un de la valeur pr cis e Si le fusible saute souvent consulter votre revendeur d autoradios JVC Si le bruit est un probl me Cet appareil incorpore un filtre de bruit dans le circuit d alimentation Cependant avec certains v hicules quelques claquements ou autres bruits non d sir s risquent de se produire Si cela arrive raccorder la borne de masse arriere de l appareil au ch ssis de la voiture voir le sch ma de raccordement ci dessous en utilisant des cordons les plus gros et les plus courts possibles telle qu une barre de cuivre ou une tresse Si le bruit persiste consulter votre revendeur d autoradios JVC La puissance admissible des haut parleurs doit tr
20. des vis plus longues sont utilis es elles peuvent endommager l appareil Retrait de l appareil e Avant de retirer l appareil lib rer la section arri re 1 Retirer le panneau de commande 2 Retirer la plaque d assemblage J Introduire les deux poign es dans les fentes comme montr Puis tout en tirant doucement les poign es cart es faire glisser l appareil pour le sortir S assurer de conserver les poign es apres l installation de l appareil Handle Manija Poign e Liste des pi ces pour l installation et raccordement Les pi ces suivantes sont fournies avec cet appareil Apres v rification veuillez les placer correctement Remote controller Mando a distancia T l commande Rubber cushion Coj n de goma Amortisseur en caoutchouc Battery Pila CR2025 O FRANCAIS ELECTRICAL CONNECTIONS To prevent short circuits we recommend that you disconnect the battery s negative terminal and make all electrical connections before installing the unit If you are not sure how to install this unit correctly have it installed by a qualified technician Note This unit is designed to operate on 12 V DC NEGATIVE ground electrical systems If your vehicle does not have this system a voltage inverter is required which can be purchased at JVC car audio dealers Replace the fuse with one of the specified rating If the fuse blows frequently consult your JVC car audio dealer e f noise is a
21. dio para autom viles e Si el ruido fuese un problema Esta unidad tiene un filtro de ruido en el circuito de alimentaci n oin embargo en algunos veh culos pueden producirse chasquidos u otros ruidos indeseados En tal caso conecte el terminal de tierra posterior Ver diagrama de conexi n abajo del receptor al chasis del autom vil utilizando cordones m s gruesos y cortos tales como alambre de cobre trenzado o de grueso calibre Si el ruido persiste consulte a su concesionario de JVC de equipos de audio para autom vil e La entrada m xima de los altavoces traseros debe ser mayor de 45 W y la de los delanteros de 45 W con una impedancia de 4 a 8 O Aseg rese de conectar esta unidad a tierra en el chasis del autom vil e El sumidero t rmico estar muy caliente despu s del uso Aseg rese de no tocarlo al desmontar esta unidad ZX Typical Connections Conexiones t picas Raccordements typiques Before connecting Check the wiring in the vehicle carefully not to fail in connecting this unit Incorrect connection may cause a serious damage to this unit 1 Connectthe colored leads of the power cord to the car battery speakers and automatic antenna if any in the following sequence D Black ground 2 Yellow to car battery constant 12V 3 Red to an accessory terminal 4 Blue with white stripe to automatic antenna 200mA max 5 Others to speakers 2 Connect the antenna cord 3 Finally connect th
22. e sup rieure 45 W l arri re et 45 W l avant avec une imp dance de 4 80 S assurer de raccorder la mise la masse de cet appareil au ch ssis de la voiture Le radiateur devient tr s chaud apr s usage Faire attention de ne pas le toucher en retirant cet appareil Avant de commencer la connexion v rifiez attentivement le c blage du v hicule pour ne pas connecter incorrectement cet appareil Une connexion incorrecte peut endommager s rieusement l appareil 1 Connectez les fils de couleur du cordon d alimentation la batterie de la voiture aux enceintes et l antenne automatique s il y en a une dans l ordre suivant CD Noir a la masse 2 Jaune a la batterie de la voiture 12V constant 8 Rouge la prise accessoire 4 Bleu bandes blanches l antenne automatique 200mA max 5 Autres aux enceintes 2 Connectez le cordon d antenne 3 Finalement connectez le faisceau de fils l appareil tambi n podr usar un Ignition switch Interruptor de encendido Interrupteur d allumage ITI Fuse block bloque de fusibles porte fusible To automatic antenna if any A la antena autom tica si la hubiere Vers borne d antenne automatique s il y en a une Altavoz derecho trasero Haut parleur droit arri re PRECAUTIONS on power supply and speaker connections e DO NOT connect the speaker leads of the power cord to the
23. e wiring harness to the unit Before connecting the CD changer make sure that the unit is turned off Antes de conectar el cambiador de CD asegurese de que la unidad est apagada Avant de connecter le chaneur CD s assurer que l unit est teinte JVC CD changer jack teft Jack del cambiador de CD de JVC v ase diagrama EJ i Prise de changeur CD JVC Izquierdo Gauche HON Ro 1 Line out F X see diagram Salida de linea Y EDO Sortie de ligne ext rieur voir le diagramme EJ D ous m Sot ete Antenna terminal iere Fusible de 15A o O Terminal de la antena Droit Fusible 15A mE EIE sis Borne de l antenne 1 To metallic body or chassis of the car 2 3 P A un cuerpo met lico o chasis del autom vil Vers corps m tallique ou ch ssis du v hicule To antenna a A la antena 7 A l antenne BW Yellow To a live terminal in the fuse block connecting to the car battery i Amarillo bypassing the ignition swich 1 Before checking the operation of this unit prior to installation this lead must be connected otherwise power cannot be turned on 1 Antes de comprobar el funcionamiento de esta unidad previa a de la instalaci n es necesario conectar este cable de lo contrario no se podr conectar la alimentaci n 1 Pour v rifier le fonctionnement de cet appareil avant installation ce fil doit tre raccord sinon l appareil ne peut pas tre mis sous tension Alt
24. ed on s the yellow lead connected e No sound from the speakers s the speaker output lead short circuited e Sound is distorted s the speaker output lead grounded Are the terminals of Land R speakers grounded in common Unit becomes hot s the speaker output lead grounded Are the terminals of L and R speakers grounded in common Manchon Trim plate Placa de guarnici n Plaque d assemblage LOCALIZACI N DE AVERIAS e El fusible se quema Est n los conductores rojo y negro correctamente conectados e No es posible conectar la alimentaci n Est el cable amarillo conectado No sale sonido de los altavoces Est el cable de salida del altavoz cortocircuitado e El sonido presenta distorsi n Est el cable de salida del altavoz conectado a masa Est n los terminales de los altavoces L y R conectados a una masa com n e La unidad se calienta Est el cable de salida del altavoz conectado a masa Est n los terminales de los altavoces L y R conectados a una masa com n x 0 x x 1101KKSFLEJEIN EN SP FR FRANCAIS e Cet appareil est concu pour fonctionner sur des sources de courant continu de 12 V a masse NEGATIVE INSTALLATION MONTAGE DANS LE TABLEAU DE BORD e l illustration suivante est un exemple d installation typique Cependant vous devez faire les ajustements correspondant votre voiture par
25. for more than 2 CLOCK H CLOCK M SCM LINK LEVEL B SKIP or EXT IN appears on You can adjust the sound modes BEAT SOFT POP see page 15 to your preference and store your own adjustment in memory There is a time limit in doing the following procedure If the setting is cancelled before you finish start from step 1 again 16 l 7 Call up the sound mode you want to adjust See page 15 for details SCM Select BAS bass or TRE treble ES Adjust the bass or treble level See page 14 for details Repeat steps 2 and 3 to adjust the other items To turn ON OFF the loudness function See page 14 for details e Press and hold SCM until the sound mode you have selected in step 1 flashes on the display Your adjustment made for the selected sound mode is stored in memory SCM Repeat the same procedure to store other sound modes To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 15 OTHER MAIN FUNCTIONS wr setting the clock To check the current clock time changing the display mode Press and hold the button for more CN Press DISP repeatedly Each than 2 seconds ES time you press the button the CLOCK H CLOCK M display mode changes as follows ER SCM LINK LEVEL B SKIP or EXT IN appears on the display During tuner operatio
26. ing it to this unit Before operating your CD automatic changer e Refer also to the Instructions supplied with your CD changer f no discs are in the magazine of the CD changer or the discs are inserted upside down NO CD or NO DISC will appear on the display If this happens remove the magazine and set the discs correctly e If RESET 1 RESET 8 appears on the display something is wrong with the connection between this unit and the CD changer If this happens check the connection connect the connecting cord s firmly if necessary then press the reset button of the CD changer Playing CDs Select the CD automatic changer Playback starts from the first track of the first disc All tracks of all discs are played back Disc number W coca S Elapsed playing time The clock time is shown if you have pressed DISP to see the clock time See page 17 Note on One Touch Operation When you press CD cH the power automatically comes on You do not have to press WYIVATT to turn on the power To fast forward or reverse the track Press and hold P A 4 while playing a CD to fast x forward the track Press and hold mea WV while playing a CD to reverse the track To go to the next track or the previous track Press P A briefly while playing a CD to go ahead to the beginning of the next track Each time you press the button consecutively the beginning of the next track is
27. ions in each band FM1 FM2 FM3 and AM manually Ex Storing an FM station of 88 3 MHz into the preset number 1 of the FM1 band Select the FM1 band Mi FMS AWM 2 Tune into a station of 88 3 MHz See page 8 to tune into a station 3 Press and hold the button for more than 2 seconds Preset number P1 starts flashing for a while 4 Repeat the above procedure to store other station into other preset numbers Notes e A previously preset station is erased when a new station is stored in the same preset number Preset stations are erased when the power supply to the memory circuit is interrupted for example during battery replacement If this occurs preset the stations again T o ma Z T ZZ gt eura Tuning into a preset station You can easily tune into a preset station Hemember that you must store stations first If you have not stored them yet see pages 8 and 9 I 9 O Z T Select the band FM1 FM2 FM3 or AM you want DA co gt FM2 gt FM3 gt AM 7 2 Select the number 1 6 for the preset station you want 8 MO 9 10 12 RND m D D D D D 1 RPT 10 When an FM stereo broadcast is hard to receive Press MODE to enter the functions mode while listening to an FM stereo broadcast 2 Press MO monaural while still in the functions mode so that the MO indicator lights up on the display Each time you press the b
28. jo NO conecte la unidad utilizando ese conexionado de altavoz original Si lo hace se producir n da os graves en la unidad Vuelva a efectuar el conexionado de altavoz de manera que pueda conectar la unidad a los altavoces de la manera indicada en la Fig 3 Si el conexionado de altavoz de su autom vil es como se indica en la Fig 3 podr conectar la unidad utilizando el conexionado de altavoz original de su autom vil Si tiene dudas sobre el conexionado de altavoz de su autom vil consulte con su concesionario Fig 2 Connecting the leads Conexi n de los conductores Raccordement des fils Solder the core wires to connect them securely Suelde los alambres de alma para conectarlos con firmeza Souder les mes desfils pour les raccorder entre eux de facon s re Twist the core wires when connecting Hetuerza los alambres de alma para conectarlos Torsader les mes des fils en les raccordant tape PRECAUTIONS sur l alimentation et la connexion des enceintes e NE CONNECTEZ PAS les fils d enceintes du cordon d alimentation la batterie sinon l appareil serait s rieusement endommag Connectez correctement le fil noir a la masse le fil jaune a la batterie de la voiture 12V constant et le fil rouge la prise accessoire e AVANT de connecter les fils d enceintes du cordon d alimentation aux enceintes v rifiez le c blage des enceintes de votre voiture Si le c blage des e
29. l input ER SCM LINK LEVEL EXT IN No B SKIP or EXT IN n the display Note on One Touch Operation a iA abd When you press CD CH the power automatically comes 3 Select EXT IN if not shown on the display on You do not have to press I VAT T to turn on the power 2 Turn on the connected device and start playing the source 3 Adjust the volume L To turn up the TA P volume o 4 Select the desired mode LINE IN or CHANGER s To turn down the E volume Selecting the external component to use You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS U57 not supplied To use the external component as the playback source through this receiver you need to select Mote which device CD changer or external component For connecting the Line Input Adaptor KS U57 and DO the external component refer to the Installation connection Manual separate volume MAINTENANCE 9 This unit requires very little attention but you will be able to extend the life of the unit if you follow the instructions below CAUTIONS Do not play the tapes with peeling labels otherwise they can damage the unit e Tighten tapes to remove slack since loose tape To clean the heads ac 9 l Z T may become entangled with the mechanism Do not leave a cassette in the cassette compartment after use as the ta
30. me 00 min Volume 50 max Note f you are using a two speaker system set the fader level to OO 2 Adjust the level Note Normally the and buttons work as the volume control So you do not have to select VOL to adjust the volume level To increase the volume Using the Sound Control Memory SCM You can select and store a preset sound adjustment suitable to each playback source Advanced SCM Selecting and storing the sound modes Once you select a sound mode it is stored in memory and will be recalled every time you select the same source A sound mode can be stored for each of the following sources FM1 FM2 FM3 AM Tape CD Changer and external components e f you do not want to store the sound mode separately for each playback source but want to use the same sound mode for all the Sources see Canceling Advanced SCM on page 15 Select the sound mode you want Each time you press the button the sound mode changes as follows SCM When SCM LINK is set to LINK ON the selected sound mode can be stored in memory for the current source and the effect applies only to the current source When SCM LINK is set to LINK OFF the selected sound mode effect applies to any source E Preset values Indication SCWOFF Fatso 00 00 On BEAT Rock or disco music 02 00 On SOFT os Of POP 201 of O Recalli
31. n X 9 g Z T Displayed only when one of the following sources is selected FM AM and TAPE Frequency lt gt Clock 2 Set the hour During tape operation Select CLOCK H if not shown on the display Play mode TAPE lt gt Clock pr LOCK Hee r lt lt During CD changer operation RO Elapsed playing time gt Disc number gt Clock t e During external Component operation LINE IN gt Clock 3 Set the minute 1 Select CLOCK M e If the unit is not in use when you press DISP the power turns on the clock time is shown for B LOCK M a 5 seconds then the power turns off N 17 ur Selecting the level display 3 Select the desired mode AUDIO 1 AUDIO 2 or OFF You can select the level display according to your preference When shipped from the factory AUDIO 2 is selected AUDIO1 Level meter illuminates AUDIO2 Alternates level meter and illumination display OFF Erases the audio level indicator I o O Z T Press and hold SEL for more than 2 seconds CLOCK FP CLOCK M SCM LINK LEVEL B SKIP or EXT IN appears on the display q Displayed only when one of the following sources is selected FM
32. n las siguientes piezas Despu s de inspeccionarlas col quelas correctamente Perno de montaje M5 x 20 mm Boulon de montage M5 x 20 mm e When installing the unit without using the sleeve e Instalaci n de la unidad sin utilizar la cubierta Lors de l installation de l appareil sans utiliser de manchon In a Toyota for example first remove the car radio and install the unit in its place En un Toyota por ejemplo primero extraiga la radio del autom vil y luego instale la unidad en su lugar Par exemple dans une Toyota retirer d abord l autoradio et installer l appareil la place Flat type screws M5 x 6 mm Tornillos tipo plano M5 x 6 mm Vis t te plate M5 x 6 mm Not included with this unit No suministrado con esta unidad Non fourni avec cet appareil Bracket M nsula Support Pocket Compartimiento Bracket Flat type screws M5 x 6 mm Poche M nsula Tornillos tipo plano M5 x 6 mm Support VIS t te plate M5 x 6 mm Note When installing the unit on the mounting bracket make sure to use the 6 mm long screws If longer screws are used they could damage the unit Nota Cuando instala la unidad en la m nsula de montaje aseg rese de utilizar los tornillos de 6 mm de longitud Si se utilizan tornillos m s largos stos pueden da ar la unidad Remarque Lors de l installation de l appareil sur le support de montage s assurer d utiliser des vis d une longueur de 6 mm Si
33. nceintes de votre voiture est r alis comme montr sur la Fig 1 ou Fig 2 ci dessous NE CONNECTEZ PAS l appareil en utilisant ce c blage original d enceintes Si vous le faites l appareil sera s rieusement endommag Recommencez le c blage des enceintes de facon que vous puissiez connecter l appareil aux enceintes comme montr sur la Fig 3 Si le c blage des enceintes de votre voiture est comme montr sur la Fig 3 vous pouvez connecter l appareil en utilisant ce c blage original d enceintes pour votre voiture Si vous n tes pas s rs du c blage d enceintes de votre voiture consulter le concessionnaire de votre voiture CAUTION PRECAUCION PRECAUTION To prevent short circuit cover the terminals of the UNUSED leads with insulating Para evitar cortocircuitos cubra los cables NO UTILIZADOS con cinta aislante Pour viter les court circuits couvrir les bornes des fils qui ne sont PAS utilis s avec de la bande isolante E Connections Adding Other Equipment Conexiones para a adir otros equipos Raccordement pour ajouter d autres appareils You can connect an amplifier and other equipment to upgrade your car stereo system e Connect the remote lead blue with white stripe to the remote lead of the other equipment so that it can be controlled through this unit For amplifier only Connect this unit s line out terminals to the amplifier s line in terminals Disconnect the speakers from thi
34. nd the tape When the tape reaches its end playback of the same side starts A UY IN NY To stop fast forward and rewind at any position on the tape press TAPE lt P Tape play starts from that position on the tape ENGLISH 11 I o O Z T iz Finding the beginning of a tune Other convenient tape functions Multi Music Scan allows you to automatically start playback from the beginning of a specified tune You can specify up to 9 tunes ahead or before the current tune During playback To locate a tune ahead of the current tune on the tape SSM Vie aa hy P s To locate a tune before the current tune on the tape Specify how many tunes ahead or before the current tune the tune you want is located Iu lut YE O tot Each time you set the tune the number changes up to 9 When the beginning of the specified tune is located playback starts automatically Notes While locating a specified tune If the tape is rewound to its beginning playback starts from the beginning of that side If the tape is fast forwarded to the end it is reversed and played from the beginning of the other side e In the following cases the Multi Music Scan function may not operate correctly Tapes with tunes having long pianissimo passages very quiet parts or non recorded portions during tunes Tapes with short non recorded sections Tapes with high level noise o
35. ng the sound modes When SCM LINK is set to LINK ON select the source Each time you change the playback source the SCM indicator flashes on the display X 9 O Z TT Liem The sound mode stored in memory for the selected source is recalled Notes You can adjust each sound mode to your preference and store it in memory If you want to adjust and store your original sound mode see Storing your own sound adjustments on page l6 To adjust the bass and treble reinforcement levels or to turn onloff the loundness function temporarily see page 14 Your adjustments will be canceled if another source is selected Canceling Advanced SCM You can cancel the Advanced SCM Sound Control Memory and unlink the sound modes and the playback sources When shipped from the factory a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources LINK ON Advanced SCM different SCM for different sources LINK OFF Conventional SCM one SCM for all sources 15 O seconds the display c I o O Z T Displayed only when one of the following sources is selected FM AM and TAPE 2 Select SCM LINK if not shown on the display B pi D lt lt 3 Select the desired mode LINK ON or LINK OFF Storing your own sound adjustments Press and hold SEL
36. nte comme montr ci dessus Amplifier Amplificador Amplificateur Rear speakers J Altavoces posteriores Haut parleur arri re J JVC amplifier Amplificador de JVC Amplificateur JVC rL p R P n Remote lead Y connector not supplied with this unit Cable remoto Blue with white stripe Azul con rayas blancas Bleu avec bande blanche Conector en Y no suministrado con esta unidad Fil d alimentation distance Connecteur Y non fourni avec cet appareil To automatic antenna if any A la antena autom tica si la hubiere Vers l antenne automatique s il y en a une Signal cord not supplied with this unit Cable de se al no suministrado con esta unidad Cordon de signal non fourni avec cet appareil LINE OUT CPF T REAR R 7 Front speakers Altavoces delanteros Haut parleur avant KS FX280 External component Componente exterior Appareil ext rieur Line Input Adaptor KS U57 not supplied with this unit Adaptador de entrada de l nea KS U57 no suministrado con esta unidad Adaptateur d entr e de ligne KS U57 non fourni avec cet appareil cmd ILE F i LINE OUT L REAR R amp KS FX280 CD changer jack Toma del cambiador de CD Signal cord not supplied with this unit Prise du changeur CD Cable de se al no suministrado con esta unidad Cordon de signal non fourni avec cet appareil External component
37. ow the Volume level appears power automatically comes on You do not have to press this button to turn on the power 2 Select the source Volume level indicator See page 18 4 Adjust the sound as you want see pages 14 16 O N To drop the volume in a moment To operate the tuner Press 5 ATT briefly while listening to any see pages 8 10 source ATT starts flashing on the display and the To operate the tape volume level will drop in a moment see pages 11 13 To resume the previous volume level press the To operate the CD changer button briefly again see pages 20 21 To operate the external component see page 22 To turn off the power Press and hold 5 j ATT until SEE YOU appears on the display Note When you use this unit for the first time set the built in clock correctly see page 17 I o O Z T El 9 RADIO BASIC OPERATIONS Listening to the radio Select the band FM1 FM2 FM3 or AM You can select any one of FM1 FM2 and FM3 to listen to an FM station EI FM1 FM2 FM3 AM FM1 lill oo e i i Ot J EE AA Selected band appears 2 Start searching a station When a station is received searching stops To search stations of 4 higher frequencies I l SSM Ue N xA S A vs To search stations of lower frequencies To stop searching before a station is received press the same button you have pressed for
38. pe may become slack The function below is also provided to ensure the longer life of this unit Ignition key off Release Ignition key on play e When you turn off the ignition key with a Clean the heads after every 10 hours of use cassette in the compartment the unit using a wet type head cleaning tape available automatically releases the tape from its head at an audio store When you turn on the ignition key with a When the head becomes dirty you may realize cassette in the compartment playback the following symptoms automatically starts Sound quality is reduced Sound level decreases Sound drops out Do not play dirty or dusty tapes Do not touch the highly polished head with any metallic or magnetic tools To keep the tape clean Always store the tapes to their storage cases after use Do not store tapes in the following places Subject to direct sunlight With high humidity At extremely hot temperatures 23 I o O Z T 24 TROUBLESHOOTING What appears to be trouble is not always serious Check the following points before calling a service center Symptoms A cassette tape cannot be inserted Cassette tapes become hot Tape sound is at very low level and sound quality is degraded Sound is sometimes interrupted Sound cannot be heard from the speakers SSM Strong station Sequential Memory automatic preset does not work
39. problem This unit incorporates a noise filter in the power circuit However with some vehicles clicking or other unwanted noise may occur If this happens connect the unit s rear ground terminal See connection diagram below to the car s chassis using shorter and thicker cords such as copper braiding or gauge wire If noise still persists consult your JVC car audio dealer e Maximum input of the speakers should be more than 45 W at the rear and 45 W at the front with an impedance of 4 to 8 Q Be sure to ground this unit to the car s chassis The heat sink becomes very hot after use Be careful not to touch it when removing this unit Heat sink Sumidero t rmico Dissipateur de chaleur CONEXIONES ELECTRICAS Para evitar cortocircuitos recomendamos que desconecte el terminal negativo de la bater a y que efect e todas las conexiones el ctricas antes de instalar la unidad Si usted no est seguro de c mo instalar correctamente la unidad h gala instalar por un t cnico cualificado Nota Esta unidad est dise ada para funcionar con 12 V de CC con sistemas el ctricos de masa NEGATIVA Si su veh culo no posee este sistema ser necesario un inversor de tensi n que puede ser adquirido en los concesionarios de JVC de equipos de audio para autom viles e Reemplace el fusible por uno con la corriente especificada SI el fusible se quemase frecuentemente consulte con su concesionario de JVC de equipos de au
40. r humming between tunes Prohibiting tape ejection You can prohibit the tape ejection and can lock a tape in the cassette compartment Press and hold TAPE gt and 4 for more than 2 seconds NO EJECT flashes on the display for about 5 seconds and the tape is locked To cancel the prohibition and unlock the tape press and hold TAPE and 4 for more than 2 seconds again EJECT OK flashes again for about 5 seconds and this time the tape is unlock Skipping the blank portions on the tape You can skip blank portions between the tunes Blank Skip When this function is on the unit skips blank portions of 15 seconds or more fast forwards to the next tune then starts playing it Press and hold SEL select for more than 2 seconds 2 Select B SKIP blank skip with rl A Or ilda v 3 Select the desired mode with or The Blank Skip mode alternates between on and off ON gt OFF Note When the tape reaches its end while fast forwarding the tape direction will be changed automatically Playing the current tune repeatedly You can play the current tune repetedly Repeat Play 1 Press MODE to enter the functions mode while playing a tape This unit enters the functions mode 2 Press RPT repeat while still in the functions mode so that the RPT indicator lights up on the display Then each time you press the button repeat play mode turns on and off alern
41. rear Altavoz derecho frontal Haut parleur droit avant When connecting a CD changer we recommend to use one of the CH X series CD changers e f your CD changer is one of the KD MK series you need an optional cord KS U15K You can also use an external component such as a portable MD player by connecting the Line Input Adaptor KS U57 not supplied see diagram EJ Cuando conecte un cambiador de CD se recomienda utilizar uno de la serie CH X e Si su cambiador de CD es de la serie KD MK necesitar un cable opcional KS U 15K Conectando el adaptador de entrada de l nea KS U57 no suministrado componente exterior tal como un reproductor de MD V ase el diagrama Lors de la connexion d un changeur CD nous vous recommandons d utiliser un des changeurs CD de la e Si votre changeur appartient la s rie KD MK vous avez besoin d un cordon optionnel KS U15K Vous pouves aussi utiliser un appareil ext rieur tel qu un lecteur de MD en connectant l adaptateur d entr e de ligne KS U57 non fourni voir le diagramme Not included with this unit No suministrado con esta unidad Non fourni avec cet appareil dy A A un terminal activo del bloque de fusibles conectado a la bater a del autom vil desviando el interruptor de encendido A une borne sous tension du porte fusible connect e a la batterie de la voiture en d rivant l interrupteur d allumage To an accessory terminal in the fuse block A un terminal ac
42. s unit connect them to the amplifier Leave the speaker leads of this unit unused Cover the terminals of the these unused leads with insulating tape as illustrated above Usted podr conectar un amplificador y ostros equipos para mejorar el sistema est reo de su autom vil e Conecte el cable remoto azul con rayas blancas al cable remoto del otro equipo para que pueda ser controlado a trav s de esta unidad e S lo para el amplificador Conecte los terminales de salida de l nea de esta unidad con los terminales de entrada de l nea del amplificador Desconecte los altavoces de esta unidad y con ctelos al amplificador Los cables de los altavoces de esta unidad quedan sin usar Cubra los terminales de estos cables sin usar con cinta aislante tal comose indica en la figura de arriba Vous pouvez connecter un amplificateur ou autre appareil pour am liorer votre syst me autoradio e Connecter le fil d alimentation distance bleu avec des bandes blanches au fil d alimentation distance de l autre appareil de facon qu il puisse tre control par cet appareil e Pour l amplificateur seulement Raccorder les bornes de sortie ligne de cet appareil aux bornes d entr e ligne de l amplificateur D connectez les enceintes de cet appareil et connectez les l amplificateur Laissez les fils d enceintes de cet appareil inutilis s Recouvrir les extr mit s de ces fils inutilis s avec de la bande isola
43. searching CD 2 CONTROL pem To tune in a particular frequenc manually 1 Press FM AM to select the band 2 Press and hold amp 1 A or lt lt YW until M starts flashing on the display Now you can manually change the frequency while M is flashing 3 Press BPI A or a YW repeatedly until the frequency you want is reached f you hold down the button the frequency keeps changing until you release the button Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory Automatic preset of FM stations SSM Strong station Sequential Memory e Manual preset of both FM and AM stations FM station automatic preset SSM You can preset 6 local FM stations in each FM band FM1 FM2 and FM3 Select the FM band FM1 FM2 or FM3 you want to store FM stations into ES cx FM gt FM2 FM3 gt AN 2 Press and hold the both buttons for more than 2 seconds SSM appears then disappears when automatic preset is over Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected FM1 FM2 or FM3 These stations are presetin the number buttons No 1 lowest frequency to No 6 highest frequency When automatic preset is over the station stored in number button 1 will be automatically tuned in Manual preset You can preset up to 6 stat
44. ticuli re Si vous avez des questions ou avez besoin d information sur des kits d installation consulter votre revendeur d autoradios JVC ou une compagnie d approvisionnement 1 Avant le montage Appuyez sur L4J d blocage du panneau de commande pour ventuellement d tacher le panneau de commande Lorsque ce panneau de commande sort d usine il est rang dans un tui de transport 2 Retirer la plaque d assemblage 3 Lib rer les verrous du manchon et retirer le manchon D Poser l appareil la verticale Remarque Lorsque vous mettez l appareil la verticale faire attention de ne pas endommager le fusible situ sur le fond 2 Ins rer les 2 poign es entre l appareil et le manchon comme indiqu pour d sengag les verrous de manchon 3 Retirer le manchon Remarque S assurer de garder les poign es pour une utilisation ult rieur apr s l installation de l appareil 4 Installer le manchon dans le tableau de bord Apr s installation correcte du manchon dans le tableau de bord plier les bonnes pattes pour maintenir fermement le manchon en place comme montr 5 Monter le boulon de montage sur l arri re du corps de l appareil puis passer l amortisseur en caoutchouc sur l extr mit du boulon D R alisez les connexions lectriques expliqu es au dos de cette page Faire glisser l appareil dans le manchon jusqu ce qu il soit verrouill 8 Fixer la plaque d assemblage Remonter le panne
45. ut RMS Front 17 W per channel into 4 Q 40 Hz to 20 000 Hz at no more than 0 8 total harmonic distortion 17 W per channel into 4 Q 40 Hz to 20 000 Hz at no more than 0 8 total harmonic distortion Load Impedance 4 Q 4 Q to 8 Q allowance Tone Control Range Bass 10 dB at 100 Hz Treble 10 dB at 10 kHz Frequency Response 40 Hz to 20 000 Hz Signal to Noise Ratio 70 dB Line Out Level Impedance 2 0 V 20 kQ load 250nWb m TUNER SECTION Frequency Range FM 87 5 MHz to 107 9 MHz AM 530 kHz to 1 710 kHz Hear FM Tuner Usable Sensitivity 11 3 dBf 1 0 pV 75 Q 50 dB Quieting Sensitivity 16 3 dBf 1 8 uV 75 Q Alternate Channel Selectivity 400 kHz 65 dB Frequency Response 40 Hz to 15 000 Hz Stereo Separation 35 dB Capture Ratio 1 5 dB AM Tuner Sensitivity 20 pV Selectivity 35 dB SPECIFICATIONS CASSETTE DECK SECTION Wow amp Flutter 0 11 WRMS Fast Wind Time 100 sec C 60 Frequency Response 30 Hz to 16 000 Hz Normal tape Signal to Noise Ratio Normal tape 56 dB Stereo Separation 40 dB GENERAL Power Requirement Operating Voltage DC 14 4 V 11 V to 16 V allowance Grounding System Negative ground Allowable Working Temperature 0 C to 40 C 32 F to 104 F Dimensions W x H x D Installation Size 182 mm x 52 mm x 150 mm 7 3 16 x 2 1 16 x 5 15 16 Panel Size 188 mm x 58 mm x 14 mm 7 7 16 x 2 5 16 x 5 8 Mass 1 3 kg 2 9 lbs excluding accessories T
46. utton the MO indicator lights up and goes off alternately MODE 8 MO When the MO indicator is lit on the display the sound you hear becomes monaural but the reception will be improved the ST indicator goes off Listening to a cassette ER You can play back type 1 normal tapes Insert a cassette The unit turns on and tape play starts automatically When one side of the tape reaches its end during play the other side of the tape automatically starts playing Auto Reverse Note on One Touch Operation When a cassette is already in the cassette compartment pressing TAPE lt 4 turns on the unit and starts tape play automatically 2 Select the tape direction Each time you press the button the tape direction changes alternatively forward THRE and reverse THRE 161 Ct 4 To stop play and eject the cassette Press 4 Tape play stops and the cassette automatically ejects from the cassette compartment If you change the source to AM FM or CD CH the tape play also stops without ejecting the cassette this time You can also eject the tape with the unit turned off TAPE OPERATIONS D CHANGER CONTROL Ti RPT 12 RND e Press gt gt A for more than 1 second to fast forward the tape When the tape reaches its end the tape is reversed and playback starts from the beginning of the other side Press te VW for more than 1 second to rewi
47. while listening to the CD changer Each time you press the button the disc number decreases and the selected disc starts playing Functions the same as the and buttons on the main unit NOTE These buttons cannot be used for the clock CLOCK H CLOCK M SCM LINK LEVEL b SKIP and EXT IN adjustments see pages 17 18 and 22 Selects the sound mode Each time you press SCM Sound Control Memory the mode changes Selects the source Each time you press FUNC function the source changes e Searches stations while listening to the radio Fast forwards or reverses the track if pressed and held while listening to a CD Skips to the beginning of the next tracks or goes back to the beginning of the current or previous tracks if pressed briefly while listening to a CD Functions as the fast forward or rewind buttons or Multi Music Scan buttons while listening to a tape I o O Z T edi Preparing the remote controller Before using the remote controller Aim the remote controller directly at the remote sensor on the main unit Make sure there is no obstacle in between T o O Z T Remote sensor Do not expose the remote sensor to strong light direct sunlight or artificial lighting Installing the battery When the controllable range or effectiveness of the remote controller decreases replace the battery 1 Remove the battery holder 1 Push out the b
Download Pdf Manuals
Related Search