Daewoo DVG-9200N DVD Player
Contents
1. Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential Unpublished works 1992 1997 Dolby Laboratories Inc All rights reserved DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc 4 DVG 9100N 9200N 04 5 18 3 57 PM x o z 15 BASIC OPERATIONS Note The Step2 can be cancelled if you do not connect it to the amplifier PLAY DISCS Push POWER button on the TV and audio system Push TV VIDEO button on the TV select VIDEO mode TV Select S Video mode if using an S VIDEO connection TVIVIDEO Select the correct audio input on the amplifier e Each amplifier is different from another please ER refer to the manual for the amplifier e g Ac meum connect the audio output of the DVD player to m DVD LD the DVD audio input of an amplifier Push STAND BY ON button on the front panel or button on the remote control to turn the unit on Push OPEN CLOSE button to open the disc tray and insert the disc with its label upward Push OPEN CLOSE button again to close the disc tray The unit begins to read the disc The TV screen shows the DVD menu and title menu When playing a DVD DVD menus and titles are displayed on TV screen n the case of CD the disc plays in order of its track2. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance OR MOISTURE WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT IMPORTANT FOR LASER PRODUCTS e LASER This Digital Video Disc Player employs a Laser System To ensure proper use of this product please read this owner s manual carefully and retain for future reference Should the unit require maintenance contact an authorized service location see service procedure Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure To prevent direct exposure to the laser beam do not try to open the enclosure Visible laser radiation when open and interlocks defeated DO NOT STARE INTO THE BEAM us e CLASS 1 DANGER Visible laser radiation when open and interlock failed oa VUE LASER PRODUCT defeated Avoid direct exposure to beam CAUTION Do not open the top cover There are no user serviceable parts inside the Unit leave all servicing to qualified service personnel CAUTION Any changes or modification in construction of this device which are not expressly approved by the party respons
3. OWNER S MANUAL DVG 9100N DVG 9200N DVD PLAYER 2e D oco di VIDEO DVG 9100N 9200N 04 5 18 3 56 PM sle zl1 o TABLE OF CONTENTS IMPORTANT SAFETY PRECAUTIONS 2 FEATURES retentis 5 ABOUT DISC rre 6 BEFORE OPERATION 8 PREPARATIONS BEFORE OPERATION 10 Front Panel seen 10 Rear Panel tr 11 nonet 12 Names and Layout of Remote Controls 13 CONNECTIONS 14 BASIC OPERATIONS 15 Play DISCS c t te tte tes 15 System Setting sss 16 V Mode 0 eeeeeeteseeteseeeeeeeeteseeteeeteneeeeneeteneeees 16 015 16 Fast aee 17 Slow Play 17 Step ea ue cies 17 Select Audio 18 Select Channels sess 18 Selecting 3D 18 PLAYING A DESIRED SCENE 19 To skip scenes in a 19 Directly moving to a desired title DVD 19 Playing a disc containing files 20 Repeat Play 4 2 monies 20 Repeating a defined period from A to B DVD 21 Select a Subtitle Language 21 Searching sss 22 PLA
4. UNIQUE FUNCTIONS Multi angle and multi language bring unique trick functions Parent lock makes it easy to control the content of discs SCREEN Ordinary screen and wide screen 16 9 are available COMPATIBILITY The unit can play DVD video discs and is compatible with CD CD G CD R CD RW PIC CD MP3 discs also can do DVD R DVD RW DVD RW of video format ZOOM It can enlarge pictures MULTI FUNCTIONS Fast forward fast reverse forward and reverse slow frame play repeat play and program play TIME SEARCH It can search a specific part on a disc especially good for watching fiction movies RESUME PLAY It can memorize the position where the disc is stopped and resume playback VIDEO OUTPUT Standard video S video component progressive interlace video output mode AUDIO OUTPUT Analog audio output coaxial and optical digital audio output can be connected with the appropriate amplifier to enjoy high quality sound effects DVG 9100N 9200N 04 5 18 3 56 PM 6 ABOUT DISC PRINCIPLES FOR WRITING This manual mainly introduces how to use buttons on the remote control You may operate the unit if the buttons on the unit have the same or similar names as or to those on the remote control PLAYABLE DISCS DVD and Audio CD Disc type Playable Restriction DVD video Possible Region number 1 or Region number All CD Possible PCM or DTS digital o
5. You may program the track on a disc and play them in the programmed order For MP3 play refer to 28 page Push PROGRAM button the screen shows PROGRAM TRACK 01 10 Push direction button input the sequence number you want to program playing After the programming is finished push direction button to select START Push PLAY button to start playing 4 EXIT gt I NEXT DVG 9100N 9200N 04 5 18 3 57 PM 4125 PLAY DISCS IN VARIOUS WAYS O DIGEST PLAY DVD SELECT DIGEST TYPE Push INTRO button when the unit is TITLE DIGEST ur CHAPTER DIGEST playing disc the screen shows TITLE INTERVAL CHAPTER INTERVAL Push direction button to select the INTRO digest type And push PLAY button L Note TITLE DIGEST The player will play 5 seconds each title After moving the cursor in the position push NUMBER button to select the title and push PLAY button Then the player will begin to play from the title you selected Or put the cursor in the position of desired picture and push PLAY button CHAPTER DIGEST The player will display the beginning picture of each chapter in current selected title TITLE INTERVAL Scan the story in the disc from 00 00 00 on the unit will play the disc every other 10 minutes CHAPTER INTERVAL Scan the story in the current title from 00 00 00 on the unit
6. SCREEN SAVER OFF 28 DVG 9100N 9200N 04 5 18 3 57 PM 914129 o FUNCTION SETTING BASIC NAVIGATION To navigation through the setting on the screen use the direction buttons to scroll through the list of settings and use PLAY button to select the high lighted function SETUP MENU Press the SETUP button to enter the On Screen Display and to exit at any time In each of the menus selecting MAIN PAGE SETUP menu will immediately return you to the initial screen PREFERENCES PAGE ENGLISH mee FRENCH SPANISH SUBTITLE ENGLISH FRENCH SPANISH CHINESE JAPANESE KOREAN RUSSIAN THAI DISC MENU ENGLISH FRENCH SPANISH CHINESE JAPANESE KOREAN RUSSIAN THAI PARENTAL KID SAFE T NO PARENTAL PASSWORD CHANGE DEFAULTS RESET 29 DVG 9100N 9200N 04 5 18 3 58 PM x o z 30 o FUNCTION SETTING GENERAL SETUP E TVTYPE You may select according to the colour system of the TV to be connected e Select PAL for a PAL TV e Select AUTO for a multi system TV e Select NTSC for a NTSC TV B TV DISPLAY 1 NoRMAUPS This is selected when the unit is connected with a normal TV Wide screen images are shown on the screen but with some parts cut automatically 2 NORMAL LB This is selected when the unit is connected with a normal TV Wide screen images are shown on screen with black belts on the top and bottom 3 16 9 WIDE This is selected when the unit is connect
7. chapter or track number 5 DVD CD indicator Indicates the hour DVD CD indicator Indicates the minutes DVD CD indicator Indicates the seconds Recognized DISC TYPE indicator 9 Recognized DISC TYPE indicator CD DISC LOAD PLAY indicator This indicator is lit up after recognizing the disc e 0 PLAY PAUSE indicator REPEAT MODE indicator CD In case you want to repeat and play a chapter or track ALL CO In case you want to repeat and play a title or disc 3 MP3 indicator Indicates the track number when MP3 disc is played NUMBER CHARACTER indicator Chapter track number and time are displayed in loading DVD CD disc while track number and time are displayed in loading MP3 Tray is opened LOSE Tray is closed Ad Disc is loaded O d SC There is no disc in tray E rr ar Disc has some error amp DVD AUDIO STREAM indicator Indicates the audio type of the disc under play is DOLBY DIGITAL DVD AUDIO STREAM indicator dts 2 r r4 c3 DVG 9100N 9200N 04 5 18 3 57 PM slo z 13 PREPARATIONS BEFORE OPERATION NAMES AND LAYOUT OF REMOTE CONTROLS After setting the mode by using SETUP menu for example AUDIO select in PREFERENCE SETUP the setting is kept though you switch the unit off and turn it on MUTE BUTTON z of POWER BUTTON OPEN CLOSE BUTTON SETUP ANGLE 3D SETUP BUTTON 72 sq ec 3D SURROUND BUTTON ANGLE BUTTO
8. number Stop playback Press Press amp to remove the disc 15 DVG 9100N 9200N 04 5 18 3 57 PM 4116 o BASIC OPERATIONS 16 SYSTEM SETTING According to the system of the TV to be connected set the system of the unit to make it match the TV Push SYSTEM button on the remote control then choose TV TYPE SYSTEM Every time the user presses the SYSTEM button the video output system changes as belows M PAL AUTO NTSC V MODE WHEN SELECTING INTRLACE OR PROGRESSIVE OR S VIDEO n case of connecting the component press the V MODE on the remote control to select INTRLACE OR PROGRESSIVE When you connect the Composite picture is not displayed press the V MODE on the remote control to select Composite video V MODE DISPLAY Each time you press the DISPLAY button when playing a disc the TV screen shows the information as DISPLAY lvo TITLE ELAPSED TITLE REMAIN CHAPTER ELAPSED CHAPTER REMAIN DISPLAY OFF SINGLE ELAPSED SINGLE REMAIN TOTAL ELAPSED TOTAL REMAIN DISPLAY OFF CHAPTER ELAPSED CHAPTER REMAIN DISPLAY OFF 4 Vote Push PLAY to play normally when playing fast Note The marked FAST PLAY speed on owner s manual and real fast play speed can be different depending on which disc you play Note Push PLAY to play normally Vote Push PLAY to play normally F
9. AST PLAY DVG 9100N 9200N 04 5 18 3 57 PM sle z 17 BASIC OPERATIONS When playing disc you may play it forward fast or reverse it fast to find what you need D C FFX2 Push gt to play forward fast Each OFX time you push the button the speed of picture changes like the right sides FF 8 FF X16 E FF X32 DVD only PLAY 9 FR X2 Push lt to reverse the disc fast Each time you push the button the 9 FR X4 speed of picture changes like the 9 FR X8 right sides SO FR X16 GD FR X32 DVD only 6 PLAY SLOW PLAY Enjoy slow motions by the following steps Push SLOW button to play slowly PAUSE STEP Push PAUSE IT Pushing STEP gt on the remote control to make the playback pause again moves the picture forward frame by frame 17 DVG 9100N 9200N 04 5 18 3 57 PM x o z 18 o BASIC OPERATIONS uA X SELECT AUDIO LANGUAGE You can choose the language according to your choice when playing mulit language DVD Press AUDIO button select different languages AUDIO Note 1 Different disc has different languages 2 You can push AUDIO button to choose the language you want when you play multi language DVD discs Attention Please select the AUDIO language in SETUP menu to keep the setting SELECT CHANNELS CD MP3 You may select the right channel or left channel or stereo from a multi chan
10. C CAN NOT BE PLAYED There is no disc in the unit Insert the disc on the disc tray properly with the label side up Clean the disc Moisture has condensed in the unit Remove the disc and leave the unit on for about one hour SCREAMING Keep the phone far away from the speaker Turn down the volume down the volume of phone and echo REMOTE CONTROL DOES NOT WORK Remove barriers between the remote control and the unit Replace the batteries with new ones Point the remote control at the remote control sensor of the unit ATTENTION KEEPING THE STATUS OF STOP MORE THAN 5 MINUTES ENTERS SCREEN SAVE MODE WHEN THE SCREEN SAVE MODE IS KEPT MORE THAN AN HOUR THE SET ENTERS STAND BY MODE 4 DVG 9100N 9200N 04 5 18 3 58 PM x o z 35 TECHNICAL SPECIFICATIONS Laser wavelength 650nm Video PAL AUTO NTSC Frequency response 20Hz 20KHz 1dB Signal noise ratio gt 90dB Channel separation gt 85dB 1KHz Dynamic range gt 80dB 1KHz output level 2 0 0 0 2Vrms Analog Output Load impedance 10KQ Audio Digital output level 0 5 0 1Vp p Load impedance 750 output level 1 0 0 1Vp p Composite Load impedance 750 imbalance negative polarity Output Vid output level brightness 1 0 0 1Vp p 2805 S video chromaticity Clor 0 286 2096 Load impedance 75Q Component Y 1Vp p Pb Pr 0 7Vp p Load im
11. EAT button you can select SINGLE REPEAT ONE FOLDER REPEAT FOLDER SHUFFLE and RANDOM Single mode the player will stop after finished playing the current item Repeat one mode repeat the current item Repeat folder mode repeat the items in the current directory Shuffle mode play items by random Folder mode the player will stop after finished playing the whole directory E PLAY PIC CD BY ZOOM OR ROTATING OPERATING PIC CD The screen will show ZOOM 10096 when you push ZOOM button under playing status the current picture can be zoomed by push or 44 button and the screen will also show the zoom ratio of the picture ZOOM 100 ZOOM 125 ZOOM 150 ZOOM 200 ZOOM 75 ZOOM 50 The picture will restore to the normal status if you push PLAY button under the ZOOM status 27 DVG 9100N 9200N 04 5 18 3 57 PM x o zx 28 o FUNCTION SETTING MENU SETTING According to the recorded information and external equipment set the following functions for DVD to obtain the best playing status Push SETUP button to set the main menu DOLBY DIGITAL SETUP TV PAL DUALMONO STEREO AUTO L MONO NTSC R MONO TV DISPLAY NORMALPS MIX MONO NORMAL LB er DYNAMIC RANGE FULL ANGLE MARK ON 212 OFF 3 4 OSD LANG ENGLISH Mio FRENCH aon SPANISH i ES PORTUGUESE _ 0 DIGITAL OUT SPDIF OFF SPDIF RAW SPDIF PCM CAPTIONS OFF
12. ENE SEARCHING SEARCHING DVD WITH A TITLE CHAPTER NUMBER OR A TIME You may directly enter a title or chapter number to search fast on a disc The unit plays from the DVD point P MENU 1 If you want to search with a chapter or a TITLE D title number press SEARCH button DVD ees AUDIO 2 ENGLISH It shows the current disc mode TITLE CHAPTER SUBTITLE OFF Y AUDIO SUBTITLE ANGLE REPEAT TIME Disp Bitrate76 lll TITLE ELAPSED 0 07 29 Select the TITLE or CHAPTER and enter the new chapter or title number to be searched using the PLAY NUMBER and 4 gt A Y buttons 2 In completing entering please press SEARCH button PLAY starts from the selected position SEARCHING CD AND SOMETHING DISC WITH A TIME OR TRACK TIME 1 You may directly enter a disc or track time to search fast on a disc The unit plays from the point e If you want to search with a track number Something disc press SEARCH button SEARCH MENU TRACK 0101 It shows the current disc mode TRACK DISC V DISCTIME 0 50 25 TIME TRACK TIME REPEAT TIME Disp TRACK TIME 0 50 25 REPEAT OFF v Select the TRACK and enter the new track Bitrate76 TOTAL ELAPSED 0 07 29 number to be searched using the PLAY NUMBER and 4 gt A V buttons In completing entering please press SEARCH button PLAY starts from the selected position f you want to search with a disc time press SEARCH b
13. N NUMBER BUTTON RETURN m RETURN BUTTON TITLE PBC BUTTON DISPANS TITLE PBC MENU DISPLAY BUTTON amp MENU BUTTON UP DOWNILEFT RIGHT DIRECTION zi BUTTON BS re 2n A PLAYIENTER BUTTON MARK BUTTON 1 SEARCP MARK PROGRAM ZOOM PROGRAM BUTTON i RN nn STEP BUTTON ime STOP BUTTON ONE CHAPTER TRACK B ONE CHAPTER TRACK BACKWARD BUTTON EN P 3T FORWARD BUTTON VOLUME BUTTON lt FAST FORWARD FASTBACKWARD DN SEARCH BUTTON SEARCH BUTTON AUDIO BUTTON Htm A e Oc MEME SUBTITLE BUTTON SLOW BUTTON REPEAT BUTTON j E INTRO BUTTON b H A B REPEAT BUTTON I Oe RAISE TONE LOWER TONE I CHANNEL MODE SYSTEM CHANNEL BUTTON i lt SYSTEM BUTTON ATONIC TONE E DVD V MODE BUTTON VIDEO 13 DVG 9100N 9200N 04 5 18 3 57 PM sle z 14 CONNECTIONS 14 Turn off all equipment before operation The unit has many kinds of output modes like A V output S VIDEO output and digital signal output COAXIAL OPTICAL You may select as you need CONNECTED TO A TV AND AN ORDINARY AMPLIFIER AMPLIFIER R SURROUND L Dvo IN MONITOR Our COAXIALIN OPTICAL Connects either A A A B B B 0C C or C WOOFER OUT VIDEO
14. SETUP B DUAL MONO This is the output mode of the L and R signals of the set audio output If it is set to MONO the function only works when the DVD being played is 2 0 channel STEREO Choose this option the audio output should be dummy stereo signal L MONO R MONO MIX MONO DYNAMIC RANGE FULL Set Off to view a program in the dynamic range as recorded in disc If you hear loud sound softer and soft sound louder set Full 3 4 1 2 1 4 OFF PREFERENCE SETUP E AUDIO e Selecting an audio language Set it as the preferred audio language In case the audio language is set and recorded in the DISC it is automatically played in the set language in every playing For example English is set and recorded as audio language in the DISC it is played in English E SUBTITLE Selecting Subtitle language Please set it as the preferred language In case the subtitle language is set and recorded in the DISC it is automatically played in the set language in every playing For example English is set and recorded as subtitle language in the DISC it is played in English 4 DVG 9100N 9200N 04 5 18 3 58 PM 3 2133 Note The password is set by yourself Note The password is 3308 when the unit is turned on initially or you forget the password FUNCTION SETTING E DISC MENU Selecting Disc Menu language Please set it as the preferred DISC MENU
15. T button the screen shows orderly DVD Note Push REPEAT to C CHAPTER C2 TITLE C2 ALL REPEAT OFF cancel the repeat function 4 CD something disc TRACK C2 ALL REPEAT OFF SINGLE REPEAT ONE FOLDER REP FOLDER SHUFFLE RANDOM 20 4 DVG 9100N 9200N 04 5 18 3 57 PM 21 Note 1 For some discs subtitles cannot be removed 2 Subtitle function is only available for some discs with subtitle recorders PLAYING A DESIRED SCENE REPEATING A DEFINED PERIOD FROM A TO B You may press A B to enjoy some parts repeatedly when playing a disc 1 Press A B to set a starting point A 2 Press A B twice to an end point B Afterwards the unit plays from A to B 3 Press A B three times to remove A B repeat A B CoA C2 A B REPEAT OFF SELECT A SUBTITLE LANGUAGE When play a multi subtitle DVD you may select one subtitle to show it on the screen Keep pressing SUBTITLE button till the user s preferred language appears If a DVD disc includes subtitle information every time the user presses SUBTITLE button ENGLISH FRENCH SueTiTes SPANISH and others appear one by one SUBTITLE 01 03 ENGLISH Remove the subtitle Press SUBTITLE until the screen shows SUBTITLE OFF 21 DVG 9100N 9200N 04 5 18 3 57 PM x o z 22 o PLAYING A DESIRED SC
16. Y DISCS IN VARIOUS WAYS 23 Select ANGIOs honte emet 23 ZOOM Play iiri ei 23 Malik aee 23 Program Play 24 Program Play 24 Digest Play 25 Digest Play something disc 25 Digest Play 25 Play or PIC CD lt 26 FUNCTION SETTING 28 Menu Setting 28 General SetU saans 30 Dolby Digital 32 Preference Setup 32 OTHERS rennen 34 Troubleshooting sss 34 Technical Specifications 35 1 DVG 9100N 9200N 04 5 18 3 56 PM xje z 2 o IMPORTANT SAFETY PRECAUTIONS CAUTION J RISK OF ELECTRIC SHOCK AN DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock
17. ay this disc This player will play DVD discs made for ALL regions Therefore this player will play DVD discs marked with labels containing the region number 1 or ALL Region 1 Region ALL DVG 9100N 9200N 04 5 18 3 56 PM 1418 BEFORE OPERATION SECURITY Before operation check if the voltage of the unit is in line with the local voltage Hold the plug to disconnect it from the mains outlet Do not pull the power cord When the plug of the unit is connected to the mains outlet the unit will be still connected to AC even if the power is turned off Disconnect the plug as soon as liquid or objects enter the unit The unit can not be used until being checked by experts Do not open the cabinet as laser rays employed by the unit may damage eyes Any servicing should be done by qualified service personnel PLACEMENT Put the unit where ventilation is good enough to prevent overheating Never put the unit in direct sunlight or near heat sources Put the unit horizontally never put any heavy object on the unit To protect the pickup do not put the unit where there is dust If there is dust on the pickup use a cleaning disc to clean it Paying particular attention to the operating instructions of the cleaning disc CONDENSATION Moisture will appear on the pickup lens in the following cases e The unit is suddenly moved from a cold place to a warm place e The unit is put in a room wit
18. connect the antenna or cable system 4 DVG 9100N 9200N 04 5 18 3 56 PM xje z 4 14 15 16 17 18 19 20 IMPORTANT SAFETY PRECAUTIONS This will prevent damage to the unit due to lightning and power line surges DISC TRAY Keep your fingers well clear of the disc as it is closing It may cause serious personal injury OVERLOADING Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock OBJECT AND LIQUID ENTRY Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short out parts that could result a fire or electric shock Never spill liquid of any kind on the unit BURDEN Do not place a heavy object on or step on the product The object may fall causing serious personal injury and serious damage to the product DISC Do not use a cracked deformed or repaired disc These discs are easily broken and may cause serious personal injury and product malfunction SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is damaged B If liquid has been spilled or obje
19. cts have fallen into the unit C If the unit has been exposed to rain or water D If the unit does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation E If the product has been dropped or the cabinet has been damaged 21 22 23 24 F When the unit exhibits a distinct change in performance this indicates a need for service REPLACEMENT PARTS When replacement parts are required have the service technician verify that the replacements he uses have the same safety characteristics as the original parts Use of replacements specified by the unit manufacturer can prevent fire electric shock or other hazards SAFETY CHECK Upon completion of any service or repairs to this unit ask the service technician to perform safety checks recommended by the manufacturer to determine that the unit is in safe operating condition WALL OR CEILING MOUNTING The product should be mounted to a wall or ceiling only as recommended by the manufacturer HEAT The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat FCC NOTICE This equipment has been tested and found to comply with the
20. ed outside of our factory nor to cases where the serial number thereof has been removed defaced or changed This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to assume for us any other liability in connection with the sale of our electronic products Over the counter exchange of initially defective units A unit is described as initially defective when the dealer opens the unit and finds that it is inoperative or a customer opening a new unit finds that it is initially defective This unit may be returned to the factory by the dealer for exchange Under no circumstances will a customer be permitted to return an initially defective unit directly to the factory Model Parts Labor DVG 9100N DVG 9200N 1 Year 3 months This instrument is listed by Underwriter s Laboratories Inc It is designed and manufactured to meet rigid U L safety standards against X radiation fire casualty and electrical hazards Daewoo Electronics e Ul US America Inc LISTED 120 Chubb Ave Lyndhurst NJ 07071 USA For more information about this or other Daewoo products call 1 800 DAEWOOS 4
21. ed with a wide screen TV B ANGLE MARK This only works when there is an angle mark on the disc Select ON the screen shows the mark when playing a DVD Select OFF the mark is not shown 30 4 DVG 9100N 9200N 04 5 18 3 58 PM sjo z 31 Note OSD means On Screen Display FUNCTION SETTING OSD LANGUAGE When select a language the screen show this language For example if you select ENGLISH the OSD is in English AUDIO OUTPUT SPDIF OFF No signal is output from the coaxial optical port SPDIF RAW Select this when the DVD player is connected with a power amplifier through optical or coaxial port Please refer to the page 14 when a Dolby Digital DVD DTS DVD or MPEG DVD is played select this the coaxial or optical port will output in the corresponding digital format source code The power amplifier to be connected must have Dolby Digital DTS and MPEG DVD is played the optical or coaxial port will output in PCM 2 channel format SPDIF PCM Select this when the DVD player is connected with a TV or a power amplifier through audio cord CAPTIONS The hidden subtitle is shown or turn off E SCREEN SAVER Start the screen saver the screen saver image appears when the unit stops or the image is motionless for a few seconds This saver can keep the screen from being damaged 31 DVG 9100N 9200N 04 5 18 3 58 PM x o z 32 o 32 FUNCTION SETTING DOLBY DIGITAL
22. f the titles on the disc is displayed If using some disc the menu screen will appear only when the disc has PBC function and PBC ON is activated n the case of PBC play press RETURN to return to the sub menu press it again to return to the home menu Push the PLAY button after pressing the 4 A V or number button to select the desired title The selected title now starts playing 19 DVG 9100N 9200N 04 5 18 3 57 PM x o zx 20 o PLAYING A DESIRED SCENE PLAYING A DISC CONTAINING MP3 FILES When a MP3 disc is loaded MP3 menu screen is displayed automatically depending on MP3 disc s folder structure Use the direction button to select the folder you want to play by pressing PLAY button This button allows you to see the file lists under the folder Use the direction button and select a MP3 title using the PLAY button then play will start automatically When you know the title number enter the MP3 title number using the numeric buttons on the remote control and then press PLAY button Press PPI on the remote control to choose next title next files in play mode Press I amp for previous title previous files in play mode When you know the title number enter MP3 title number using the numeric buttons on the remote control and then press PLAY button REPEAT PLAY When play a DVD disc this function can be used to repeatedly play a title chapter or disc REPEAT Push REPEA
23. h a heater or in cold air from an air conditioner Using the unit in a humid place In these cases the unit can not work Unload the disc and leave the unit on for about one hour to evaporate the moisture CLEANING Use a soft cloth with a little neutral detergent to wipe the cabinet panel and controls Never use abrasive paper polishing powder solvent like alcohol or gasoline HANDLING DISC To keep the disc clean do not touch the playsides of the disc Do not attach paper or tape to the disc Keep the disc away from direct sunlight or heat sources Store the disc in a disc case after playback CLEANING DISC Before playback wipe the disc outward from the centre with clean cloth Do not use any type of solvent such as thinner benzine commercially available cleaners or antistatic spray 4 DVG 9100N 9200N 04 5 21 5 56 PM sle zl9 BEFORE OPERATION CHECK ACCESSORIES Check if you have all the accessories after the carton is opened Remote control AAA batteries Video Audio cord Owner s manual E H Qno a 00900 00 95 anon s USE REMOTE CONTROL 1 Open the battery compartment 2 Insert two AAA batteries make sure to match and of the batteries to the marks in the battery compartment 3 Close the battery compartment 4 Point the remote control at the remote sensor 1 Batteries can last for about 6 mont
24. hs generally Change the batteries of that does not Work 2 If the remote control is not used for a long time remove the batteries to prevent battery leakage DVG 9100N 9200N 04 5 18 3 57 PM x o z 10 o 10 PREPARATIONS BEFORE OPERATION FRONT PANEL DVG 9100N h 00000 DVG 9200N oo quy qe j efi de DAZNOO E C ar er 000000 D STANDBY ON button To switch the unit On or Off when connected to AC power outlet 3 OPEN CLOSE button To open or close the disc tray 3 PLAY button To play the loaded disc Press this button to go to the preferred item when the menu is displayed on the TV screen PAUSE button Used to view one frame at a time during play Press PLAY button for normal play 8 STOP PREV button To skip back from the current chapter for DVD or track for CD NEXT button To skip forward to the next chapter for DVD or track for CD If playing a Video CD with PBC this button works as the NEXT button to move to the next play list REMOTE SENSOR Receives a light signal from the remote controller DISPLAY Displays operation status DVG 9100N 9200N 04 5 18 3 57 PM xlel z 11 PREPARATIONS BEFORE OPERATION Cu REAR PANEL a OUT 1 R OPTICAL AUDIO COA SVIDEO OUT COMPONENT VIDEO D AUDIO OUT L R TRACK Two phono sockets for analogue 2 Cha
25. ible for compliance could void the user s authority to operate the equipment ATTENTION KEEPING THE STATUS OF STOP MORE THAN 5 MINUTES ENTERS SCREEN SAVE MODE WHEN THE SCREEN SAVE MODE IS KEPT MORE THAN AN HOUR THE SET ENTERS STAND BY MODE MACROVISION This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited 4 DVG 9100N 9200N 04 5 18 3 56 PM sle zl3 This set has been designed and manufactured to assure personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated in this unit will protect you if you observe the following procedures for installation use and servicing This unit is fully transistorized and does not contain any parts that can be repaired by the user 1 8A READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS All operating and use instructions should be followed CLEANING U
26. ilation is provided or the manufacturer s instructions have been adhered to POWER SOURCES This unit should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consult your video dealer or local power company For units intended to operate from battery power or other sources refer to the operating instructions GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug still fails to fit contact your electrician to replace your obsolete outlet To prevent electric shock do not use this polarized plug with an extension cord receptacle or other outlet unless the blades can be fully inserted without blade exposure If you need an extension cord use a polarized cord POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs and the point where they exit from the unit LIGHTNING For added protection for this unit during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and dis
27. language In case the DISC MENU language is set and recorded in the DISC it is automatically played in the set language in every playing For example English is set and recorded as a DISC MENU language in the DISC it is played in English PARENTAL The content of a disc with lock function is evaluated by grades You can select an age grade as your need Example Select 1 KID SAFE the scenes of violence inadvisable to children are not played For adults the screen suggests you enter the code after pushing PLAY button you can watch if the code is right PASSWORD Select PASSWORD in PREFERENCE SETUP menu to setup password input a password Enter a password according to the screen DEFAULT RESET Each function setting returns to the factory initial status if you select this 33 DVG 9100N 9200N 04 5 18 3 58 PM slo z 34 OTHERS 34 TROUBLESHOOTING If you experience the following problems while using the unit this troubleshooting guide can help you NO SOUND Check if the unit is connected securely Make sure you operate the TV or amplifier correctly NO IMAGE IMAGE ROLLS AND NO COLOR Check if the unit is connected securely Make sure you operate the TV correctly Make sure you set the color system correctly BAD SOUND QUALITY Make sure the audio output mode is set correctly Make sure the audio connection between the unit and amplifier is right DIS
28. limits for a Class B digital device pursuant to part 15 of the FCC Rule These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorientate or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experience radio TV technical for help 4 DVG 9100N 9200N 04 5 18 3 56 PM sl e zl5 FEATURES 9 6 6 6 6 OUTSTANDING SOUND QUALITY Dolby Digital PAE system developed by Dolby Laboratories and DTS developed by DTS Inc features high quality surround sound which can be played in DVD or CD disc at home to reproduce high quality sound effects HIGH DEFINITION The unit adopts MPEG2 coding format and brings the high horizontal resolution
29. nel Push CHANNEL button the screen show alternately and select the desired audio channel CHANNEL LEFT RIGHT MIX MONO MONO MONO TR Note You can use channel function when you play the disc you can choose mono audio output left or right channel stereo or mix mono SELECTING 3D AUDIO This function outputs 3D effects on the stereo audio analog output where 3D effects are broken down into 7 surround modes 1 Press 3D button 3D CONCERT Every time the user presses 3D button CONCERT LIVING ROOM HALL BATHROOM CAVE ARENA and CHURCH 3D appear one by one 2 Select the desired 3D sound mode 18 DVG 9100N 9200N 04 5 18 3 57 PM x o z 19 o PLAYING A DESIRED SCENE Note You can select the desired title directly by using number button TO SKIP SCENES IN A DISC Push gt gt I to move to the next chapter or track The current chapter or track moves to the next chapter or track Push 144 to move to previous chapter or track The current chapter or track moves to the previous chapter or track or first scene of current chapter or track DIRECTLY MOVING TO A DESIRED TITLE DVD Some movie discs may contain multiple titles If the disc has a movie title menu recorded on it the TITLE PBC button can be used to select the movie title Details of operation may differ depending on the disc used Push the TITLE PBC or MENU button A list o
30. nnel audio in order to a TV or stereo amplifier 2 VIDEO OUT Connects composite video signal to input AV or PHONO sockets of TV or monitor to achieve high fidelity colour reproduction COMPONENT Y Pb Pr Connects to TV or monitor equipped with Component input In order to achieve a sharper and Cleaner picture than when connected via VIDEO OUT composite video POWER SUPPLY SOCKET WIRE Creates POWER between wall outlet and the unit 5 DIGITAL AUDIO OPTICAL OUT Connects digital audio under play mode into an AV amplifier or a receiver equipped with digital audio decoder for you to enjoy the theatre quality sound in your home S VIDEO OUTPUT Connects to TV or monitor equipped with S VIDEO input In order to achieve a sharper and Cleaner picture than when connected via VIDEO OUT composite video DIGITAL AUDIO COAXIAL OUT Connects digital audio under play mode into an AV amplifier or a receiver equipped with digital audio decoder for you to enjoy the theatre quality sound in your home 11 DVG 9100N 9200N 04 5 18 3 57 PM 914112 12 PREPARATIONS BEFORE OPERATION H Cu C Cur Ct H v J d NE La me Ll 1 D Recognized DISC TYPE indicator DVD 2 Recognized DISC TYPE indicator HDCD 3 PBC indicator This indicator is lit up in selecting PBC ON while this indicator disappears in selecting PBC OFF DVD CD indicator Indicates the
31. nplug this unit from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning ATTACHMENTS Do not use attachments unless recommended by the unit s manufacturer as they may cause hazards WATER AND MOISTURE Do not use this unit near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool ACCESSORIES Do not place this unit on an unstable cart stand tripod bracket or table The unit may fall causing serious injury to a child or adult as well as serious damage to the unit Use this unit only with a cart stand tripod bracket or table recommended by the manufacturer A unit and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the video product and cart combination to overturn VENTILATION Slots and openings in the case are provided for 10 11 12 13 IMPORTANT SAFETY PRECAUTIONS PORTABLE CART WARNING symbol provided by RETAC ventilation to ensure reliable operation of the unit and to protect it from overheating These openings must not be blocked or covered These openings must not be blocked by placing the unit on a bed sofa rug or other similar surface This unit should never be placed near or over a radiator or heat radiator This unit should not be placed in a built in installation such as a bookcase or rack unless proper vent
32. pedance 75Q Power 120V 50Hz 60Hz 12W Body W x H x D 430 x 38 x 260 mm Dimensions Packing 510 x 88 x 310 mm Weight Gross Net 3 5Kg 2 6Kg Notes Design and specifications in this owner s manual are subjected to change without prior notice to improve quality and function 35 4 DVG 9100N 9200N 04 5 24 6 30 PM WARRANTY DEAM Daewoo Electronics America warrants each new electronic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furnish a new part at the Company s option in exchange for any part of any unit of its manufacture which under normal installation use and service disclosed such defect provided the unit is delivered by the owner to us or to our authorized distributor from whom purchased or authorized service station intact for our examination with all transportation charges prepaid to our factory To establish and receive warranty service at our factory or authorized service facilities proof of purchase dated sales invoice is required Written authorization must be obtained before any merchandise is returned to the factory This warranty does not extend to any of our electronic products which have been subjected to misuse neglect accident incorrect wiring not our own improper installation unauthorized modification or used in violation of instructions furnished by us nor units which have been repaired or alter
33. tton when you need book mark function then choose the item you want to resume playing then push PLAY button to continue playing from the saving point 02 05 08 23 4 DVG 9100N 9200N 04 5 18 3 57 PM sle z 24 o PLAY DISCS IN VARIOUS WAYS Vote e First one is title second one is chapter e f the disc has only one title TT will not be displayed 24 PROGRAM PLAY DVD You may program the title and chapter on a disc and play them in the programmed order Push PROGRAM button the screen shows PROGRAM Input the sequence number you want to program playing PROGRAM TT 05 CH CH 06 TT CH 02 TT CH 07 TT CH 03 TT CH 08 TT CH 04 TT CH 09 TT CH 05 TT CH 10 TT CH EXIT OPI NEXT PROGRAM TT 12 CH TT 03 CH 01 06 TT CH TT 08 CH 02 07 TT CH After the programming is finished move cursor to START by direction button and push PLAY button to start playing CH 08 TT CH TT CH 09 TT CH TAH 10 TT CH EXIT START NEXT Push STOP button two times to remove program play If you want to remove any program no put the cursor in the position of the program number push RETURN button PROGRAM PLAY CD
34. ut CD G Possible Audio Graphic playback CD R Possible CD MP3 CD RW Possible CD MP3 DVD R Possible DVD video DVD RAM impossible DVD RW Possible DVD video DVD RW Possible DVD video Picture CD JPEG Possible Total disc capacity over 4M Each file under 1M CD MP3 Possible Windows format only STRUCTURE OF DVD STRUCTURE OF CD DISC DISC TITLE TN TRACK CHAPTER gt q gt a gt lt lt lt gt PsP TITLE The images or music of a DVD are divided into some units among which title is the biggest one When playing a DVD the movie is the title When playing a CD the combined tracks make up the title CHAPTER It is smaller than title among the units of a DVD A title is made up of several chapters and each chapter has a number for search But some discs may not have numbered chapters 4 DVG 9100N 9200N 04 5 18 3 56 PM sle z 7 o ABOUT DISC TRACK In a CD each track has a number to enable search functions SCENE The menu pictures motion and motionless pictures of a CD can be divided into some parts these parts are scenes Each scene has a number for search REGION MANAGEMENT INFORMATION This unit is designed and manufactured to respond to the Region Management information that is recorded on a DVD disc The region number of this player is 1 If the region number described on the DVD discs does not correspond to the Region number of this player the player will not pl
35. utton Select the DISC TIME and enter the new time to be searched using the PLAY NUMBER and 4 gt A V buttons 2 If you want to search with a track time of CD press SEARCH button Select the TRACK TIME and enter the new time to be searched using the NUMBER buttons 22 4 DVG 9100N 9200N 04 5 18 3 57 PM 23 o PLAY DISCS IN VARIOUS WAYS SELECT ANGLE Note Some discs have images with different screen angles you may select among Multi Angle them For example when you watch a running train you may select to watch it function is limited the front the left window the right window without stopping it to a DVD disc supporting multi Keep pressing ANGLE button till the angle information preferred angle appears P 1 4 29 2 4 select ANGLE2 ANGLE 3 4 select ANGLE3 224 4 4 select ANGLE4 ZOOM PLAY This function can be used to enjoy a motion or motionless picture Push ZOOM button when playing the Om screen shows orderly 4A By ZOOM PLAY M x4 MN omm XB Push UP DOWN LEFT RIGHT 4 gt A E button to move the enlarged picture 4 1 BOOK MARK Note 1 Push MARK button the screen will HUI eraseia show the following frame book mark ur 2 Moving direction button to select the saving position on the screen button Push PLAY button to save the time tag 3 Push MARK bu
36. will play the disc every other 10 minutes E DIGEST PLAY something disc non SELECT DIGEST TYPE TRACK DIGEST Push INTRO button when the unit is DISC INTERVAL playing disc the screen shows TRACK INTERVAL Push direction button to select the INTRO digest type And push PLAY button Note e TRACK DIGEST The player will play 5 seconds each track Push NUMBER button to select the track then push PLAY button the player will begin to play from the track you selected DISC INTERVAL Scan the story in the disc from 00 00 00 on the unit will play the disc every other 10 minutes E DIGEST PLAY CD Push INTRO button when the unit is 7 010 playing disc the screen shows INTRO The player will play 5 seconds each track 25 4 DVG 9100N 9200N 04 5 18 3 57 PM x o zx 26 PLAY DISCS IN VARIOUS WAYS PLAY MP3 OR PIC CD DISC E USE NUMBER BUTTONS TO SELECT TRACKS OR PIC CD 1 The screen will display as right after the disc is loaded 2 Eachtime you press PROGRAM button FOLDER and FILE LIST appear one by one At this time you can select the item in the list 3 You can select the file you want using direction buttons 4 Press PLAY button after selecting the file you want The file will be played back 26 DVG 9100N 9200N 04 5 18 3 57 PM slo z 27 PLAY DISCS IN VARIOUS WAYS E SELECT PLAYING MODE MP3 OR PIC CD Push REP
Download Pdf Manuals
Related Search