Home
GE 29878GE1 Digital Answering Machine
Contents
1. Fecha de compra________Nombre de la tienda_ GARANT A LIMITADA Lo que cubre su garant a e Cualquier defecto en material o mano de obra Por cu nto tiempo despu s de la compra e Un a o a partir de la fecha de compra El periodo de garant a para unidades arrendadas se inicia con la primera renta o 45 d as de la fecha del embarque a la firma de arrendamiento lo que ocurra primero Lo que haremos e Proporcionarle una unidad nueva o a nuestra opci n una reacondicionada e La unidad de intercambio quedar bajo garant a por el resto del periodo de garant a del producto original C mo hacer un reclamo de garant a e Empaque bien la unidad incluyendo todos los cables etc que originalmente ven an con el producto Se recomienda usar el cart n y materiales de empaque originales e Prueba de compra como factura o recibo de compra que ofrezca evidencia de que el producto est dentro del periodo de garant a debe ser presentado para obtener servicio bajo garant a Tambi n escriba claramente su nombre direcci n y la descripci n del defecto Mande v a UPS o un servicio de paqueter a equivalente a Thomson multimedia Inc 11721 B Alameda Ave Socorro Texas 79927 e Pague cualquier cargo que le facture el Centro de Intercambio por servicio que no est cubierto por garant a e Asegure su paquete contra p rdida o da os Thomson multimedia Inc no acepta responsabilidad en caso de da os o p rdida du
2. PARA REPRODUCIR MENSAJES Cuando el indicador de mensajes parpadea continuamente usted ha recibido mensajes nuevos e Para reproducir mensajes oprima y suelte el bot n PLAY MEMO e Para detener la reproducci n oprima y suelte el bot n STOP SET e Para volver a empezar el mensaje actual oprima y suelte el bot n PREVIOUS e Para regresar al principio de un mensaje anterior oprima y suelte el bot n PREVIOUS dos veces en un segundo e Para saltar al principio del siguiente mensaje oprima y suelte el bot n NEXT e Para borrar un mensaje mientras se reproduce oprima y suelte el bot n ERASE El contestador anuncia Message Erased Mensaje Borrado para confirmar que el mensaje ha sido borrado PARA BORRAR TODOS LOS MENSAJES Cuando el contestador no est reproduciendo o grabando mensajes oprima y sostenga el bot n ERASE hasta que usted escuche la indicaci n Message Erased Mensaje Borrado Si usted no tiene ning n mensaje el aparato anunciar Zero Message Cero Mensaje NOTA Los mensajes nuevos deben ser escuchados de principio a fin incluyendo la grabaci n de la hora fecha antes de que puedan ser borrados PARA DEJAR UN RECADO Oprima y sostenga el bot n MEMO Grabe su recado despu s del anuncio y se escuchar un tono Suelte el bot n MEMO cuando usted haya terminado de hablar El aparato trata el recado como si fuera mensaje
3. ATLINKS USA Inc Manager Consumer Relations P O Box 1976 Indianapolis IN 46206 Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift This information will be valuable if service should be required during the warranty period Purchase date Name of store LIMITED WARRANTY What your warranty covers e Any defect in materials or workmanship For how long after your purchase e One year from date of purchase The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm whichever comes first What we will do e Provide you with a new or at our option a refurbished unit e The exchange unit is under warranty for the remainder of the original product s warranty period How to make a warranty claim e Properly pack your unit Include any cables etc which were originally provided with the product We recommend using the original carton and packing materials e Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service Also print your name and address and a description of the defect Send via standard UPS or its equivalent to Thomson multimedia Inc 11721 B Alameda Ave Socorro Texas 79927 e Pay any charges billed to you by the Exchange Center for service
4. PARA REVISAR LAS PROGRAMACIONES Esta funci n le permite revisar la hora actual n mero de timbres para contestar y c digo de seguridad e Oprima y suelte el bot n STOP SET para empezar a revisar El aparato anuncia las programaciones actuales PARA AJUSTAR EL VOLUMEN Utilice los botones de volumen VOLUME y los botones y para aumentar o disminuir el volumen El aparato emite un tono cuando no est anunciando una programaci n o reproduciendo un mensaje INDICADORES DE MENSAJES El indicador de mensajes MESSAGES le hace saber el estado actual de su aparato ESTADO EXPLICACION SOLUTION El indicador de mensajes parpadea Los mensajes nuevos han sido continuamente recibidos oprima PLAY MEMO para escuchar sus mensajes La memoria est llena Borre algunos mensajes El Indicador de Mensajes parpadea r pidamente El Indicador de Mensajes est iluminado y no parpadea No se requiere ninguna acci n el aparato est listo para recibir mensajes El Indicador de Mensajes est apagado Oprima el bot n ON OFF ERASE para activar NOTA 1 Un mensaje viejo es aquel que ha sido escuchado completamente incluyendo la marca de la hora d a Un mensaje nuevo es aquel que NO HA sido escuchado completo 2 Cuando el contestador est desactivado contesta una llamada despu s del d cimo 10 timbre pero no reproduce el saludo El contestador no toma mensajes cuando est desactivado
5. NOTAS No se puede usar este equipo con un tel fono de previo pago prove do por la compa a telef nica Las l neas compartidas son sujetas a las tarifas del estado y por eso es posible que Ud no pueda usar su propio equipo telef nico si Ud estuviera compartiendo la misma l nea telef nica con otros abonados Se debe notificar la compa a telef nica cuando se desconecte permanentemente su tel fono de la l nea 2 Derechos de la Compa a Telef nica Si su equipo causase alg n problema en su l nea que pudiera da ar la red telef nica la compa a telef nica siempre que sea posible le avisar de la posible interrupci n temporal de su servicio En caso que la compa a no pudiera avisarle de antemano y hubiera necesidad de tomar tal acci n la compa a telef nica podr interrumpir su servicio inmediatemente En caso de tal interrupci n telef nica temporal la compa a debe 1 darle aviso al momento de tal interrupci n temporal de servico 2 concederle a Ud la oportunidad de corregir la situaci n 3 informarle a Ud de sus derechos de presentar una questa a la Comisi n de acuerdo con los procedimientos dictados en la Subparte E de la Parte 68 de las Regulaciones y Reglas de la FCC La compa a telef nica puede hacer los cambios en sus instalaciones de comunicaci n en equipos en sus funcionamientos o procedimientos que digne necesarios para el manejo de sus negocios y que no sean incompatibles con la
6. or long distance charge SETTING THE SECURITY CODE This setting allows you to change the factory default security code used to access your answerer from a remote location The default code is 123 1 The unit announces Security code the current security code To set security code press next press set to continue 2 To change the first security code number press and release the NEXT or PREVIOUS buttons until the desired setting is announced The unit announces all three numbers but only the first number will change 3 To store the first number press and release the STOP SET button A short tone will be heard 4 To change the second and third numbers repeat steps 2 and 3 After the third number is stored the unit announces all the stored settings REVIEWING THE SETTINGS This function allows you to review the current time rings to answer and security code e Press and release the STOP SET button to start the review The unit announces the current settings ADJUSTING THE VOLUME Use the VOLUME and buttons to increase or decrease the volume The unit beeps when it is not announcing a setting or playing a message MESSAGES INDICATOR The MESSAGES indicator lets you know the status of your unit STATUS EXPLANATION SOLUTION Message Indicator flashes continuously New messages have been received press PLAY MEMO to hear your messages Message Indicator flashes rapidly Memory is full Erase some m
7. y la luz del indicador de mensajes MESSAGES parpadear NOTA El tiempo m ximo digital para grabar el recado MEMO y el mensaje es de 60 segundos PARA FILTRAR LLAMADAS FUNCI N DE AUTO DESCONECTAR Usted puede filtrar llamadas entrantes escuchando mientras la persona que llama deja su mensajes Si usted quiere hablar con esa persona levante cualquier extensi n del tel fono NOTA Antes de contestar la llamada deje que el saludo se reproduzca por lo menos durante 2 segundos ACCESO REMOTO Usted puede tener acceso a su contestador desde cualquier tel fono con modalidad para marcar por tono en otra localizaci n simplemente inscribiendo su c digo de seguridad de 3 d gitos el c digo programado de f brica es 123 pero usted puede cambiarlo Tenga en cuenta que las funciones del control remoto no funcionan con tel fonos rotatorios o tel fonos de botones o de pulso Usted puede recortar la tarjeta tama o cartera con las funciones del control remoto para que usted pueda tener los comandos de teclas touch tone a la mano cuando usted est recogiendo sus mensajes desde otra localizaci n con el control remoto C mo tener acceso a su contestador 1 Llame a su n mero telef nico 2 Despu s de que usted escucha el bip que sigue al saludo inscriba su c digo de seguridad de 3 d gitos Para saltarse el saludo usted puede inscribir su c digo de seguridad de 3 d gitos en cualquier m
8. 000 00345 4 when ordering copie Q FCC NUMBER IS LOCATED ONTHE CABINET BOTTOM REN NUMBER IS LOCATED ONTHE CABINET BOTTOM CAUTION THE LIGHTNING FLASH CAUTION TO REDUCE THE RISK OF THE EXCLAMATION SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE SEE MARKING ON BOTTOM BACK OF PRODUCT ATLINKS USA Inc 10330 North Meridian Street Model 29878 Indianapolis IN 46290 15638680 Rev 1 E S 2001 ATLINKS USA Inc 01 12 Trademark s Registered Printed in China Marca s Registrada s INTRODUCTION Your Digital Answerer is designed to give you flexibility in use and high quality performance To get the most from your new answerer we suggest that you take a few minutes right now to read through this instruction manual CAUTION When using telephone equipment there are basic safety instructions that should always be followed Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference BEFORE YOU BEGIN Parts CHECKLIST Make sure your package includes the following items AC power supply MODULAR JACK REQUIREMENTS You need an RJ11 type modular phone jack which is O the most common type of phone jack and might look like the one pictured here If you don t have a al modular jack call your local phone company to find E out how to get one installed INSTAL
9. 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna that is the antenna for radio or television that is receiving the interference e Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna e Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected If these measures do not eliminate the interference please consult your dealer or an experienced radio television technician for additional suggestions Also the Federal Communications Commission has prepared a helpful booklet HowTo Identify and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington D C 20402 Please specify stock number 004
10. N DE PROBLEMAS No CONTESTA O CONTESTA EN EL D cimO 10 TIMBRE e Aseg rese de que el contestador est activado e La memoria est llena borre algunos mensajes e Verifique que haya corriente AC y verifique las conexiones de los cables telef nicos Los MENSAJES ENTRANTES EST N INCOMPLETOS e Se levant una de las extensiones e La persona que llam dej un mensaje m s largo que los 60 segundos permitidos e La memoria est llena e Usted oprimi accidentalmente el bot n STOP SET cuando estaba reproduciendo sus mensajes No RESPONDE A LOS COMANDOS DEL CONTROL REMOTO e Usted debe utilizar un tel fono de tono touch tone e Usted debe inscribir el c digo de seguridad correcto e El aparato colg Si usted no oprime ning n bot n durante un per odo de tiempo el aparato cuelga autom ticamente EL CONTESTADOR NO FUNCIONA e Desconecte el cable de corriente del enchufe el ctrico y vuelva a conectarlo para re programar el contestador Si eso no funciona desconecte el cable de corriente de la parte posterior del aparato y vuelva a conectarlo Esto constituye la re programaci n completa No PuEDE ESCUCHAR EL MENSAJE e Ajuste el control del volumen EL APARATO ANUNCIA Low BATTERY BAJA BATER A e Instale una bater a nueva de 9 voltios No PUEDE VOLVER A COMENZAR EL MENSAJE e Usted debe reproducir los mensajes por lo menos durante 5 segundos antes de oprimir el bot n PREVIOUS E
11. de seguridad AHORRADOR DE CARGOS El Ahorrador de Cargos le puede ahorrar el costo de una llamada cuando usted tiene acceso a sus mensajes desde otro tel fono e Si usted tiene mensajes nuevos el aparato contesta despu s del segundo timbre e Si usted no tiene mensajes nuevos el aparato contesta despu s del quinto timbre Usted puede colgar despu s del tercer timbre y ahorrarse pagar el costo de la llamada o el cargo de larga distancia PARA PROGRAMAR EL C DIGO DE SEGURIDAD Esta programaci n le permite cambiar el c digo de seguridad programado de f brica que se usa para tener acceso a su contestador desde una localizaci n remota El c digo de seguridad programado es 123 1 El aparato anuncia Security code el c digo de seguridad actual To set security code press next press set to continue Para programar el c digo de seguridad oprima a continuaci n oprima set para continuar 2 Para cambiar el primer n mero del c digo de seguridad oprima y suelte el bot n NEXT o PREVIOUS hasta que la programaci n deseada se anuncie El aparato anunciar los tres n meros pero nicamente el primero cambiar 3 Para almacenar el primer n mero oprima y suelte el bot n STOP SET Un tono corto se escuchar 4 Para cambiar el segundo y tercer n mero repita los pasos 2 y 3 Despu s de que el tercer n mero es almacenado el aparato anunciar todas las programaciones almacenadas
12. las sugerencias siguientes e Cambie la posici n o la ubicaci n de la antena quiere decir la antena de la radio o de la televisi n que est recibiendo la interferencia e Cambie la posici n o cambie la ubicaci n y aumente la distancia entre el equipo de telecomunicaciones y la antena receptora de la radio o de la televisi n que est recibiendo la interferencia e Conecte el equipo de telecomunicaciones a una toma en un circuito diferente del circuito al cual la antena receptora est conectada Si estas medidas no eliminan la interferencia favor de consultar a su distribuidor o a un t cnico de radio televisi n experto por otras sugerencias Tambi n la Comisi n Federal de Comunicaciones FCC ha preparado un folleto muy til HowTo Identify and Resolve Radio TV Interference Problems Como Identificar y Resolver Problemas de Interferencia de Radio Televisi n Este folleto se puede obtener del U S Goverment Printing Office Washington D C 20402 Favor de especificar el n mero 004 000 00345 4 cuando haga su pedido El n mero de la FCC est ubicado en el fondo de la base El numero REN esta ubicado en el fondo de la base ATTENTION RIESGO DE SACUDIDA EL CTRICA NO ABRA CUIDADO PARA REDUCIR EL SIGNO DE EXCLAMACI N DENTRO ARTE ADVERTENCIA PARA PREVENIR Anno AUD DE DE REPUESTO DENTRO EL RIESGO DE UNFUEGO O DE UNA ome CONSUTEA ALGUNA TicwUetDo SACUDIDA ELECTRICA NO EXPONGA Fropucro SERVIC
13. to next message during message playback Erase message during message playback Turn on answerer Turn off answerer Leave a memo press 6 again when finished Record greeting press 6 again when finished Stop playback during message playback To set security code Play greeting Erase message 29878 Contestador Digital Gu a del Usuario Creamos cosas buenas para la vida INFORMACION DEL REGISTRO A LA FCC Su equipo telef nico de la ha sido registrado con la Comisi n Federal de Comunicaciones FCC y est en acuerdo con las Partes 15 y 68 de las Regulaciones y Reglas de la FCC 1 Notificaci n a la Compa a Telef nica Local Al fondo de este equipo Ud hallar un r tulo indicando entre otra informaci n el n mero de la Registraci n con la FCC y el N mero del Equivalente Timbre REN para este equipo Ud deber a petici n proveer esta informaci n a su compa a telef nica El REN es til para determinar el n mero total de artefactos que Ud puede conectar a su l nea telef nica todav a asegurando que todos estos artefactos sonar n cuando se llame su n mero telef nico En la mayor a de las reas pero no en todas el total de los n meros REN de todos los artefactos conectados a una l nea no debe exceder 5 Para estar seguro del n mero total de artefactos que Ud pueda conectar a su l nea determinado por el REN Ud deber ponerse en contacto con su compa a telef nica local
14. CLUSIVE REMEDY OFTHE CONSUMER THOMSON MULTIMEDIA INC SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OFTHIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ONTHIS PRODUCT THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BYTHE LAWS OFTHE STATE OF INDIANA EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITEDTOTHE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE How state law relates to this warranty e Some states do not allow the exclusion no limitation of incidental or consequential damage or limitation on how long an implied warranty lasts so the above limitations or exclusions may not apply to you e This warranty gives you specific legal rights and you may have other rights which vary from state to state If you purchased your product outside the USA e This warranty does not apply Contact your dealer for warranty information a1ay apos xunoas JBIP E INO M oooO dn Buey PUBLULUOD 9U0 YoNO 19 Uy dasq y Jaye Jo Burjees6 Bulinp apos un s 11B1p 194437 Cut out this remote access card so that you can take it with you to help you use the remote features 19 9MSUB ay JO Jaquinu auoyd jeq 1919MSUY e uBIG 8L862 FOLD Press Play messages Repeat current message 7 press two times to play previous message Skip
15. Digital Answerer User s Guide We bring good things to life FCC REGISTRATION INFORMATION Your telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and 68 FCC Rules and Regulations 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating among other information the FCC Registration number and Ringer Equivalence Number REN for the equipment You must upon request provide this information to your telephone company The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called In most but not all areas the sum of the RENs of all devices connected to one line should not exceed 5 To be certain of the number of devices you may connect to your line as determined by the REN you should contact your local telephone company Notes e This equipment may not be used on coin service provided by the telephone company e Party lines are subject to state tariffs and therefore you may not be able to use your own telephone equipment if you are on a party line Check with your local telephone company e Notice must be given to the telephone company upon permanent disconnection of your telephone from your line 2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telepho
16. IO DE REPARACIONES iMpomTANTeS oe ESTE APARATO A LA LLUVIA OA LA VEA ADVERTENCIA EN LA PARTE POSTERIOR BASE DEL PRODUCTO HUMEDAD ATLINKS USA Inc 10330 North Meridian Street Hed EN Indianapolis IN 46290 2001 ATLINKS USA Inc 01 12 Trademark s Registered Impreso en China Marca s Registrada s INTRODUCCION Su Contestador Digital esta disehado para darle flexibilidad de uso y la mas alta calidad de funcionamiento Para aprovechar al maximo su nuevo contestador le sugerimos que se tome unos minutos ahora mismo para leer este manual de instrucciones CUIDADO Cuando utilice equipo telef nico hay instrucciones b sicas de seguridad que siempre deben A seguirse Refi rase a la guia de INSTRUCCIONES DE SEGURIDAD IMPORTANTES provista con este producto y guardela para referencia futura ANTES DE COMENZAR LISTA DE PARTES Asegurese de que su paquete incluye los siguientes articulos Cable de corriente AC Contestador REQUISITOS DE CONEXION Para conectar el tel fono se necesita un enchufe modular telefonico RJ11 que es el tipo de enchufe mas com n y se parece al ilustrado Si usted no tiene este tipo de enchufe llame a su compa a telef nica local para preguntar c mo conseguirlo Oe m 90 INSTALACI N DE LA BATER A En caso de un corte de corriente una bater a alcalina de 9 voltios no incluida le permite al contestador retener mensajes almacenados en la memoria Para instalar
17. IRCUNSTANCIA LA COBERTURA DE ESTA GARANT A LA REPARACION O REEMPLAZO DE UN PRODUCTO COMO SE ESPECIFICA BAJO ESTA GARANT A ES EL REMEDIO EXCLUSIVO DEL CONSUMIDOR THOMSON MULTIMEDIA INC NO SE HACE RESPONSIBLE POR DANOS INCIDENTALES DANOS DERIVADOS COMO CONSECUENCIA DEL USO DE ESTE PRODUCTO O COMO RESULTADO DEL INCUMPLIMIENTO DE CUALQUIER GARANT A IMPLICITA O EXPRESA DE ESTE PRODUCTO LA INVALIDEZ DE LAS GARANT AS O LAS GARANT AS LIMITADAS EST N REGLAMENTADAS POR LAS LEYES DEL ESTADO DE INDIANA EXCEPTO POR EL ALCANCE ESTABLECIDO POR LAS LEYES APLICABLES CUALQUIER GARANT A IMPL CITA DE MERCADO O DE SALUD PARA CUALQUIER PROPOSITO EN ESTE PRODUCTO ES LIMITADA AL PERIODO DE GARANT A ESPECIFICADO ANTERIORMENTE C mo se Relaciona la Ley Estatal a esta Garant a e Algunos estados no permiten la exclusi n ni limitaci n de da o incidental o derivado de alguna consecuencia o la limitaci n con respecto al per odo de tiempo que debe aplicarse para garant as impl citas por lo tanto las limitaciones y exclusiones mencionadas anteriormente pueden no ser aplicables para usted e Esta garant a le da a usted derechos legales espec ficos y podr tener otros derechos que var an de estado a estado Si compr su producto fuera de los Estados Unidos e Esta garant a no se aplica Vea a su distribuidor para informaci n sobre la garant a SOHBIP ap pepiinbas ap obBipos ns Inbe equiosy Egea anbjan Recorte est
18. L INDICADOR DE MENSAJES PARPADEA R PIDAMENTE e La memoria est llena Borre algunos mensajes La BATER A EST BUENA PERO SE PERDIERON MENSAJES e Estaba el cable de corriente desconectado de la parte posterior del aparato EL SALUDO CONTIN A REPRODUCI NDOSE INCLUSO DESPU S DE QUE SE LEVANTA UNA EXTENSI N e Esto es la operaci n normal El desconectado autom tico se retrasa durante 2 segundos despu s de que el aparato contesta una llamada Si usted est cerca del aparato oprima el bot n STOP SET para detener el saludo C MO OBTENER SERVICIOS DE MANTENIMIENTO La FCC requiere que este producto sea sometido a servicios de mantenimiento solamente por el fabricante o por sus agentes de servicio autorizados De acuerdo con os requerimientos de la FCC los cambios o las modificaciones que no hayan sido expresamente aprobadas por ATLINKS USA podr an anular la autoridad que tiene el usuario de operar este producto Para recibir instrucciones sobre c mo obtener servicios de mantenimiento por favor consulte la garant a incluida en esta Gu a o llame a nformaci n para el Usuario 1 800 448 0329 O env e sus preguntas a ATLINKS USA Inc Gerente Servicio al Consumidor P O Box 1976 ndianapolis IN 46206 Adjunte su recibo al folleto para futura referencia o anote la fecha en la que se compro o recibi este producto como regalo Esta informaci n ser valiosa si se llegase a requerir durante el per odo de garant a
19. LING THE BATTERY In the event of a power loss a 9 volt alkaline battery not included enables the answerer to retain messages stored in memory To install the battery 1 Remove the battery compartment door on the bottom of the unit by loosening the screw with a Phillips screwdriver Lift the door 2 Connect a fresh 9 volt alkaline battery not included The large and small contacts on the battery clip and the battery will interlock Once connected place the battery inside the battery compartment 3 Replace the battery compartment door and tighten the screw NOTE If the battery is low or not installed the unit announces Low Battery at the end of your messages Battery clip Battery compartment door Battery INSTALLATION Jnplug phone cord from wall before installing or charging batteries e Never install telephone wiring during a lightning storm Never touch uninsulated telephone wires or terminals nless the telephone line has been disconnected at the etwork interface se caution when installing or modifying telephone lines 2 Connect the telephone line cord from your telephone into the jack on the back of the answerer marked PHONE You don t have to connect your telephone in order for the answerer to record incoming messages 3 Connect the small end of the power supply into the POWER 9V AC jack on the back of the answerer Plug the other end into an AC power outlet The unit
20. PROGRAMAR LA HORA D a Esta programaci n le permite programar la informaci n de Hora Fecha que acompa a a cada Mensaje Rango de Programaciones Programaciones de F brica Hora Hora 12 a m Domingo Horas 12a m 11 p m Timbres para 4 Minutos 0 59 Contestar D a Domingo Lunes C digo de 123 Timbres para 2 4 Ahorrador de Seguridad Contestador Cargos C digode 0 9 0 9 0 9 Seguridad D a 1 Oprima y sostenga el bot n STOP SET durante dos segundos despu s su ltelo El aparato anuncia Time Hora la programaci n actual de la hora To set day press next press set to continue Para programar el d a oprima el bot n para siguiente next oprima el bot n de programaci n set para continuar 2 Para cambiar el d a oprima y suelte el bot n NEXT siguiente o PREVIOUS previo hasta que la programaci n deseada se anuncie 3 Para almacenar el d a oprima y suelte el bot n STOP SET El aparato confirma la programaci n e inscribe el men de la Hora Hora 1 El aparato anuncia la programaci n actual de la hora To set hour press next press set to continue Para programar la hora oprima el bot n para siguiente next oprima el bot n de programaci n set para continuar 2 Para cambiar la hora oprima y suelte el bot n NEXT siguiente o PREVIOUS previo hasta que la programaci n deseada se anuncie 3 Para almacenar las horas
21. a tarjeta con 9U0 a y9n0 SP opuewos UN eq iiosu las funciones del control remoto para que usted pueda llevarla consigo 0U0 ap sendsap o opnyes a ajueImp soyBip ap pepunBas ap oBipos ns equosu JOpe sajuoo Jap o9 uQJa a oJauunu a anbueja TWWLIDIQ YOOVLSILNOD 81862 DOBLAR Para Oprima Reproducir los mensajes Reproducir el mensaje actual oprima dos veces para reproducir el anterior Saltar al siguiente mensaje durante la reproducci n Borrar el mensaje durante la reproducci n Activar Contestador Desactivar Contestador Dejar un Recado oprima nuevamente 6 al terminar Grabar un recado oprima nuevamente 6 al terminar Detener la reproducci n durante la reproducci n Programar el c digo de seguridad 7 Reproducir saludo Borrar el mensaje
22. ding the time day stamp before they can be erased LEAVING A MEMO Press and hold the MEMO button Record your message after the announcement and the beep are heard Release the MEMO button when you re finished talking The unit treats the memo as a message and the MESSAGES indicator will flash NOTE The maximum digital recording time for MEMO and message is 60 seconds SCREENING CALLS AUTO DISCONNECT FEATURE You can screen incoming calls by listening as the caller leaves a message If you want to talk to that caller pick up any extension phone NOTE Before answering the call let the greeting play for at least 2 seconds REMOTE ACCESS You can access your answerer from any touch tone phone by entering your 3 digit security code the default security code is 123 but you can change it Be aware that remote functions do not work with rotary or push button pulse dialing phones You can cut out the wallet size remote card so you will have the touch tone commands when you re picking up messages from another location To access your answerer 1 Call your telephone number 2 After you hear the beep that follows the greeting enter your 3 digit security code To bypass the greeting you can enter your 3 digit security code any time while the greeting is playing 3 The unit plays the remote menu after the correct security code has been entered Menu selections can be made while the menu is playing NOTE The un
23. e e You must enter the correct security code e Did the unit hang up If you take no action for a period of time it automatically hangs up ANSWERER DOESN T WORK e Unplug power cord from the electrical outlet and plug it back in to reset the answerer If that doesn t work unplug the power cord from the back of the unit and plug it back in This is a complete reset CAN T HEAR MESSAGES e Adjust the volume control UNIT ANNOUNCES LOW BATTERY e Install a new 9 volt alkaline battery CAN T RESTART THE MESSAGE e You must play messages for at least 5 seconds before pressing the PREVIOUS button MESSAGES INDICATOR FLASHES RAPIDLY e Memory is full Erase some messages BATTERY GOOD BUT MESSAGES WERE LOST e Was the AC power supply unplugged from the back of unit GREETING CONTINUES TO PLAY EVEN AFTER AN EXTENSION PHONE IS PICKED UP e This is normal operation Auto disconnect is delayed for 2 seconds after the unit answers a call If you are near the unit press the STOP SET button to stop the greeting SERVICE FCC requires this product be serviced only by the manufacturer or its authorized service agents In accordance with FCC requirements changes or modifications not expressly approved by ATLINKS USA could void the user s authority to operate this product For instructions on how to obtain service refer to the warranty included in this guide or call customer service at 1 800 448 0329 Or refer inquiries to
24. essages Message Indicator is lit and not flashing No action required unit is ready to receive calls Press ON OFF ERASE button to turn on Message Indicator is off NOTE 1 An old message is one that has been listened to completely including the time day stamp A new message is one that HAS NOT been listened to completely 2 When the answer is off it answers calls after 10 rings but doesn t play the greeting The answer doesn t take messages when it is off PLAYING MESSAGES When the message indicator flashes continuously you have received new messages e To playback messages press and release the PLAY MEMO button e To stop playback press and release the STOP SET button e To restart the current message press and release the PREVIOUS button e To go back to the beginning of a previous message press and release the PREVIOUS button twice within one second e To skip to the beginning of the next message press and release the NEXT button e To erase a message while it is playing press and release the ERASE button The answerer announces Message Erased to confirm the message has been erased ERASING ALL MESSAGES When the answerer isn t playing or recording messages press and hold the ERASE button until you hear the Messages Erased announcement If you do not have any messages the unit will announce Zero Message NOTE New messages must be heard from beginning to end inclu
25. it answers on the 10th ring if the unit is turned off or the memory is full To access the answerer enter the 3 digit security code after the beeps If memory is full playback your messages and erase some of them to restore memory If the answerer is off press 2 to turn it on NOTE After the unit plays the remote menu it will wait 10 seconds for a command If a command is not entered the unit disconnects GENERAL PRODUCT CARE To keep your answerer working and looking good follow these guidelines e Avoid putting it near heating appliances and devices that generate electrical noise for example motors or fluorescent lamps DO NOT expose to direct sunlight or moisture e Avoid dropping answerer and or other rough treatment e Clean with a soft cloth e Never use a strong cleaning agent or abrasive powder because this will damage the finish e Retain the original packaging in case you need to ship it at a later date TROUBLESHOOTING TIPS DOESN T ANSWER OR ANSWERS ON 10TH RING e Make sure answerer is turned on e Memory is full erase some messages e Check AC power and phone line connections INCOMING MESSAGES ARE INCOMPLETE e Was an extension phone picked up e The caller left a message that is longer than 60 seconds e Memory is full e You accidentally pressed the STOP SET button when you were playing back your messages WON T RESPOND TO REMOTE COMMANDS e You must use touch tone phon
26. la bater a 1 Quite la puerta del compartimento de la bater a en la parte de abajo del aparato aflojando el tornillo con un destornillador Phillips Levante la puerta 2 Conecte una bater a alcalina nueva de 9 voltios no incluida Ambos contactos grandes y peque os del compartimento se conectar n con los de la bater a Una vez conectada coloque la bater a dentro del compartimento de la bater a 3 Vuelva a colocar la puerta del compartimento y apriete el tornillo NOTA Si la bater a est baja o no est instalada el aparato anuncia Low Battery Baja Bater a al final de sus mensajes Gancho de la bater a Puerta del compartimento de Bater a la Bater a INSTALACI N CUIDADO Desconecte el cable de l nea telef nico de la pared antes de instalar o re cargar las bater as Nunca instale el cableado del tel fono durante una tormenta de rel mpagos Nunca toque alambres telef nicos o terminales que no est n aislados a menos de que la l nea telef nica haya sido desconectada en la interfaz de la red Sea cuidadoso cuando instale o modifique l neas telef nicas 1 Conecte el cable de l nea telef nica en un contacto modular de pared 2 Conecte el cable de l nea telef nico desde su tel fono al enchufe en la parte posterior del contestador marcado PHONE Usted no tiene que conectar su tel fono para que el contestador grabe anuncios entrantes 3 Conecte el ex
27. ne network the telephone company shall where practicable notify you that temporary discontinuance of service may be required Where prior notice is not practicable and the circumstances warrant such action the telephone company may temporarily discontinue service immediately In case of such temporary discontinuance the telephone company must 1 promptly notify you of such temporary discontinuance 2 afford you the opportunity to correct the situation and 3 inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68 FCC Rules and Regulations The telephone company may make changes in its communications facilities equipment operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations If these changes are expected to affect the use or performance of your telephone equipment the telephone company must give you adequate notice in writing to allow you to maintain uninterrupted service INTERFERENCE INFORMATION This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
28. not covered by the warranty e Insure your shipment for loss or damage Thomson multimedia Inc accepts no liability in case of damage or loss en route to Thomson multimedia Inc e Anew or refurbished unit will be shipped to you freight prepaid What your warranty does not cover e Customer instruction Your Owner s Manual provides information regarding operating instructions and user controls Any additional information should be obtained from your dealer Installation and setup service adjustments Batteries Damage from misuse or neglect Products which have been modified or incorporated into other products Products purchased or serviced outside the USA Acts of nature such as but not limited to lightning damage Product Registration e Please complete and mail the Product Registration Card packed with your unit It will make it easier to contact you should it ever be necessary The return of the card is not required for warranty coverage Limitation of Warranty e THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED NO VERBAL OR WRITTEN INFORMATION GIVEN BYTHOMSON MULTIMEDIA INC IT S AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY REPAIR OR REPLACEMENT AS PROVIDED UNDERTHIS WARRANTY IS THE EX
29. omento mientras el saludo se est reproduciendo 3 El aparato reproduce el men de control remoto despu s de que el c digo de seguridad correcto se ha inscrito Las selecciones del men pueden hacerse mientras se reproduce el men NOTA El aparato contesta al d cimo 10 timbre cuando est desactivado o la memoria est llena Para tener acceso al contestador inscriba los 3 d gitos de su c digo de seguridad despu s del tono Si la memoria est llena reproduzca los mensajes y borre algunos de ellos para recuperar memoria Si el contestador est desactivado oprima el 2 para activarlo NOTA Despu s de que el aparato reproduce el men de funciones remotas se espera 10 segundos para recibir un comando Si no recibe ning n comando el aparato se desconecta CUIDADO GENERAL DEL PRODUCTO Para mantener su contestador funcionando bien y con buena apariencia observe las siguientes pautas e Evite poner el tel fono cerca de calentadores calefactores de ambiente y dispositivos que generen interferencia el ctrica ejemplo motores o l mparas fluorescentes e No lo exponga a la luz solar directa o a la humedad e No deje caer la extensi n m vil y no maltrate el tel fono e Limpie el tel fono con un trapo suave e Nunca use un agente de limpieza fuerte ni un polvo abrasivo ya que esto da ar el acabado e Retenga el empaque original en caso de que necesite embarcar el auricular en el futuro SOLUCI
30. oprima y suelte el bot n STOP SET El aparato confirma la programaci n e inscribe el men de los Minutos MINUTOS 1 El aparato anuncia la programaci n actual de la minutos To set minutes press next press set to continue Para programar los minutos oprima el bot n para siguiente next oprima el bot n de programaci n set para continuar 2 Para cambiar los minutos oprima y suelte el bot n NEXT siguiente o PREVIOUS previo hasta que la programaci n deseada se anuncie 3 Para almacenar los minutos oprima y suelte el bot n STOP SET El aparato confirma la programaci n e inscribe el men de Timbres para Contestar PARA PROGRAMAR TIMBRES PARA CONTESTAR Esta programaci n le permite seleccionar el n mero de timbres antes de que el aparato conteste una llamada 1 El aparato anuncia Rings to Answer el n mero actual de timbres para contestar To set rings press next press set to continue Para programar el n mero de timbres oprima el bot n para siguiente next oprima el bot n de programaci n set para continuar 2 Para cambiar el n mero de timbres para contestar oprima y suelte el bot n NEXT siguiente o PREVIOUS previo hasta que la programaci n deseada se anuncie 3 Para almacenar la programaci n de Timbres para Contestar oprima y suelte el bot n STOP SET El aparato confirma la programaci n e inscribe el men de c digo
31. plays a long beep and announces please wait After the pause the unit beeps again and is ready for setup or to answer calls with the default greeting and settings CAUTION Only use the ATLINKS USA Inc 5 2515 power supply that was packed with this unit Using other power supplies may damage the unit IMPORTANT INSTRUCTIONS FOR MOVING THE ANSWERER To move the answerer to a different location in the house follow these instructions 1 Disconnect the phone line or any phones you may have connected to the unit 2 Install a battery if you have not already done so This will ensure that your messages are not lost See Installing the Battery 3 Go to the electrical outlet and unplug the power supply 4 Move the unit and phone line to the desired location 5 Plug in the power supply into an electrical outlet 6 Connect all necessary phone lines SETUP ON OFF PLAY MEMO ERASE button button STOP SET button VOLUME GREETING buttons button MIC PREVIOUS NEXT butto ee MESSAGE Putton indicator RECORDING THE GREETING Before using your new answerer you should record a greeting the announcement callers hear when your answering system answers a call If you don t record a greeting callers hear a default greeting which says Record message after tone When recording the greeting you should be about 6 inches from the unit Eliminate as much background noise as possible 1 Prepare you
32. r greeting Sample Greeting Hi this is use your name here can t answer the phone right now so please leave your name number and a brief message after the tone and l Il get back to you Thanks 2 Hold down the GREETING button After the tone you have 30 seconds to record your greeting 3 Release the GREETING button when you finish The greeting will playback automatically NOTE Your recording time should not be less than 2 seconds Otherwise the unit will return to the default greeting CHANGING THE SETTINGS This function allows you to change the Time Day Rings to Answer and Security Code settings SETTING THE TIME Day This setting allows you to set the current day and time for the Time Day stamp attached to each message Default Settings Time Time 12 a m Sunday Hour 12 a m 11 p m Minute 0 59 Day Sunday Monday Rings to Answer 4 Security Code 123 Rings 2 4 toll saver to Answer Security 0 9 0 9 0 9 Code Day 1 Press and hold the STOP SET button for two seconds then release The unit announces Time the current time setting To set day press next press set to continue 2 To change the day press and release the NEXT or PREVIOUS button until the desired setting is announced 3 To store the day press and release the STOP SET button The unit confirms the setting and enters the Hour menu Hour 1 The unit announces the current hour setting To set hour p
33. rante el trayecto aThomson multimedia Inc e Un aparato nuevo o uno remozado se le enviar con los cargos pagados Lo que no cubre la garant a e Instrucciones al cliente Su manual de propietario le proporciona la informaci n con respecto a las instrucciones de operaci n y los controles del usuario Cualquier informaci n adicional debe obtenerse con su agente de ventas Ajustes de instalaci n y de preparaci n del servicio Bater as Da o por mal uso o negligencia Productos que han sido modificados o incorporados a otros productos Productos comprados o que han recibido servicio fuera de los Estados Unidos Desastres naturales por ejemplo y sin limitarse a ellos da os por rel mpagos Registro del Producto e Por favor llene y env e por correo la Tarjeta de Registro del Producto que se embarc con su producto Har m s f cil que hagamos contacto con usted si fuera necesario No se requiere la devoluci n de la tarjeta para tener la cobertura de la garant a Limitaciones sobre la Garant a LA GARANT A ESPECIFICADA ANTERIORMENTE ES LA UNICA GARANT A APLICABLE A ESTE PRODUCTO CUALQUIER OTRA GARANT A EXPRESA O IMPLICITA INCLUYENDO TODAS LAS GARANT AS IMPLICITAS DE MERCADO O DE SALUD PARA CUALQUIER PROPOSITO SON CONSIDERADAS NO VALIDAS NINGUNA INFORMACI N VERBAL O ESCRITA OTORGADA PORTHOMSON S MULTIMEDIA INC SUS AGENTES O EMPLEADOS SER CONSIDERADA PARA CREAR UNA GARANT A NI PARA AUMENTAR BAJO NINGUNA C
34. ress next press set to continue 2 To change the hour press and release the NEXT or PREVIOUS button until the desired setting is announced 3 To store the hours press and release the STOP SET button The unit confirms the setting and enters the Minute menu MINUTES 1 The unit announces the current minutes setting To set minutes press next press set to continue 2 To change the minutes press and release the NEXT or PREVIOUS button until the desired setting is announced 3 To store the minutes press and release the STOP SET button The unit confirms the setting and enters the Rings to Answer menu SETTING THE RINGS TO ANSWER This setting allows you to select the number of rings before the unit answers a call 1 The unit announces Rings to Answer the current rings to answer setting To set rings press next press set to continue 2 To change the rings to answer press and release the NEXT or PREVIOUS button until the desired setting is announced 3 To store the Rings to Answer setting press and release the STOP SET button The unit confirms the setting and enters security code menu TOLL SAVER Toll Saver can save you the cost of making a call when you access your messages from another phone e If you have new messages the unit answers after the 2nd ring e f you have no new messages the unit answers after the 5th ring You can hang up after the 3rd ring and save the pay telephone
35. s Reglas y Regulaciones de a FCC Si estos cambios pudieran alterar el uso o el funcionamiento de su equipo telef nico la compa a telef nica deber darle aviso adecuado en escrito para que Ud goce de un servico ininterrumpido INFORMACI N DE INTERFERENCIAS Este artefacto cumple con la Parte 15 de las Reglas de la FCC Su funcionamiento es sujeto a las dos condiciones siguientes Este artefacto no puede causar interferencia da osa y 2 Este artefacto debe aceptar cualquier interferencia recibida incluyendo interferencia que puede causar un funcionamiento no deseado Este equipo ha sido probado y cumple con los l mites para un artefacto digital de la Clase B de conformidad con la Parte 15 de las Reglas de la FCC Estos l mites han sido dise ados para proporcionar una protecci n razonable contra una interferencia da osa que pueda existir en una instalaci n dom stica Este equipo genera usa y puede radiar la energ a de frecuencia de una radio y si no fuera instalado y usado de acuerdo con las instrucciones puede causar interferencia da osa a las transmisiones radiales Sin embargo no hay garant a que la interferencia no ocurrir en una instalaci n en particular Si este equipo causa en efecto una interferencia da osa a la recepci n de la radio o de la televisi n lo cual puede ser determinado apagando y prendiendo el equipo le animamos a Ud de tratar de corregir la interferencia por medio de una o m s de
36. tremo corto del cable de corriente dentro del enchufe marcado POWER 9V AC en la parte posterior del contestador Conecte el otro extremo en un enchufe de corriente AC El aparato emite un tono largo y le indica que espere please wait Despu s de la pausa el aparato emite otro tono indicando que est listo para programarse o para contestar llamadas con el saludo y la programaci n de f brica CUIDADO Utilice nicamente el cable de corriente ATLINKS USA 5 2515 que viene con este aparato El uso de otros adaptadores puede resultar en da o al aparato INSTRUCCIONES IMPORTANTES PARA MOVER EL CONTESTADOR Para mover el contestador a una localizaci n diferente dentro de la casa siga las siguientes instrucciones 1 Desconecte la l nea telef nica o los tel fonos que pudiera tener conectados al aparato 2 Instale la bater a si es que todav a no lo ha hecho Con esto se asegura que sus mensajes no se pierdan Vea la secci n Instalaci n de la Bater a 3 Vaya al contacto el ctrico y desconecte el cable de corriente 4 Mueva el aparato y la l nea telef nica a la localizaci n deseada 5 Conecte el cable de corriente en un enchufe el ctrico 6 Conecte las l neas telef nicas necesarias PROGRAMACI N Bot n para borrar y activar ON OFF ERASE Bot n para reproducir PLAY MEMO Bot n para programar STOP SET Botones para volumen Bot n para el sal
37. udo VOLUME GREETING Boton para previo Bot n para Micr fono PREVIOUS siguiente MIC Indicador de NEXT mensajes MESSAGE PARA GRABAR EL SALUDO Antes de usar su nuevo contestador usted debe de grabar un saludo el anuncio que la persona que llama escucha cuando su sistema de contestador contesta una llamada Si usted no graba un saludo las personas que llaman escuchar n el saludo por omisi n pre programado de f brica que dice Grabe su mensaje despu s del tono Cuando grabe el saludo usted debe estar aproximadamente a 6 pulgadas del aparato Elimine tanto ruido de fondo como le sea posible 1 Prepare su saludo Ejemplo de un saludo Hola habla use su nombre aqu No puedo contestar el tel fono en este momento pero por favor deje su nombre n mero de tel fono y un mensaje breve despu s del tono y yo le llamar m s tarde Gracias 2 Sostenga oprimido el bot n de saludo GREETING Despu s del tono usted tiene 30 segundos para grabar su saludo 3 Suelte el bot n de saludo GREETING una vez que haya terminado El mensaje se reproducir autom ticamente NOTA Su tiempo de grabado no debe ser menos de 2 segundos De otra manera el aparato regresar al saludo de f brica PARA CAMBIAR LAS PROGRAMACIONES Esta funci n le permite cambiar la Hora D a Timbres para Contestar y las programaciones de C digos de Seguridad PARA
Download Pdf Manuals
Related Search
Related Contents
Cuddeback Attack capitolato spe d`appalto capitolato speciale d`appalto to speciale Bedienungsanleitung Polycom RealPresence Group Series の規定に関する情報の説明です Swann SWVID-SPORTW Tetro dossier - Lycéens et apprentis au cinéma Copyright © All rights reserved.
Failed to retrieve file