Citizen Eco-Drive BL5182
Contents
1. aus saver 20r srove Return to Table of Contents 4 Return to Table of Contents lt 4 gt 5 Pressing button B allows correction of the month Press B and align the second hand at the position corresponding to the month Decembar Interpretation of Month Position of November January Second Hand October February January 1 00 September Maick February 2 00 position December 12 00 position 6 Return the crown to the normal position after setting the date The watch will resume keeping time once the second hand catches up to the current seconds lt When the Calendar has been Set to a Non Existent Date gt When the crown is returned to the normal position from the date correction mode the watch switches to the lst day of the following month Example February 29 30 or 31 in an ordinary year P March 1 February 30 or 31 in a leap year gt March 1 11 USING THE CHRONOGRAPH The chronograph is able to measure time up to a maximum of 59 minutes 59 95 seconds in 1 20th second units after which it resets to 0 seconds Explanation of Hands During Chronograph Measurement Second hand When the crown is turned and the mode hand is chronograph seconds set to the chronograph CHR mode the second Hand and function hand are rapidly advanced to Function hand chronograph minutes or the 0 position and the chronograph minutes or watch enters the chronograph mode chronograph 1 20th seconds2. Setting Instructions for Movement Caliber E810 Contents click on a topic PPP P Pe mn WN PO m uo Oo ONAN HD UO FF WD EB FEATURES SPECIFICATIONS EFORE USING NAMES OF COMPONENTS FUNCTIONS UNIQUE TO SOLAR POWERED WATCHES GENERAL REFERENCE FOR CHARGING TIMES NOTES REGARDING HANDLING OF THIS WATCH SWITCHING THE MODE DISPLAY FUNCTION HAND O POSITION CHECK AND CORRECTION SETTING THE TIME AND DATE USING THE CHRONOGRAPH SETTING LOCAL TIME USING THE ALARM ALL RESET AFTER A FULL RECHARGE OR MALFUNCTION CARE OF YOUR TIMEPIECE 1 FEATURES Return to Table of Contents lt gt This watch is a solar powered watch that contains a solar cell in its face that drives the watch by converting light energy into electrical energy It is equipped with numerous functions including a full auto calendar that changes the date automatically 2100 including hour clock second day leap years units up to 59 minutes 2 SPECIFICATIONS month and year change automatical y through February 28 a daily alarm function that can be set based on a 24 and a chronograph function that allows measurement of time in 1120 59 95 seconds Movement Caliber Number E810 Accuracy Within 15 seconds per month when worn at normal temperatures of 5 C to 35 C 41 F to 95 F Operating temperature range Watch operating temperat
3. Second hand Switches to the chronograph second hand The second hand advances rapidly and makes one revolution only when starting at 0 seconds after which it moves in 1 second increments to measure chronograph seconds Function Hand Switches to either chronograph minutes or chronograph 1 20th seconds The function hand moves in one minute increments to measure chronograph minutes When button B is pressed when the chronograph is stopped the function hand switches to 1 20th seconds display during time button B is pressed Note 24 hour hand Hour hand minute hand date wheel e Continue to display the current time when the watch has been switched from the time calendar mode e Continues to display local time when the watch has been switched from the local time mode e Continues to display the alarm set time when the watch has been switched from the alarm mode Return to Table of Contents 4 Return to Table of Contents lt gt Chronograph Measurement 1 Turn the crown to set the mode hand to the chronograph CHR mode 2 Press button A to start and stop the chronograph A confirmation tone is heard whenever button A is pressed 3 Continuously pressing button A when the chronograph is stopped causes the chronograph second hand and chronograph minute hand to be reset to the 0 position A Press continuously 12 SETTING LOCAL TIME The local time function allows the time in a differe
4. since the date is corrected by 30 days in the clockwise direction it takes about 2 3 minutes for the date to be corrected Pay attention to AM and PM when correcting time difference Note When returning the time difference to original setting return the hour hand in the direction opposite that when the time difference was corrected Return to Table of Contents 4 Return to Table of Contents 4 gt 13 USING THE ALARM The alarm function uses a 24 hour clock Once the alarm has been set the alarm sounds for 15 seconds when the set time is reached once a day The time at which the alarm sounds applies to the time TME mode and cannot be set based on the local time L TM Setting the Alarm Time 1 Turn the crown and set the mode hand to the alarm ALM mode e Second hand Moves rapidly to the ON or OFF position e 24 hour hand hour hand and minute hand Move the previously set alarm time e Function hand Stops at the 0 position 2 Pull out the crown to Position 2 alarm setting position e The alarm setting is turned ON i automatically 3 Click turn the crown to set the alarm time 1 Clicking once to the right causes the hour and minute hands to move clockwise 2 Clicking once to the left causes the hour and minute hands to move counter clockwise e Turning the crown rapidly continuously clicking two or more times causes the hands to advance rapidly When stopping the hands cli
5. moves to the year display position number of years elapsed since the most recent leap year after which both stop No of years since most recent 1 Date correction position Normal position Month Note If the crown is pulled out to Position 1 when the date is changing the second hand advances rapidly after the date changes 3 Click turn the crown to the left to set the date e Clicking the crown once to the left causes the function hand to make four revolutions and the date to be corrected by one day e Turning the crown rapidly continuously clicking two or more times causes the hand to advance continuously When stopping the hand click the crown once to the right or left When the hand is not stopped manually it stops automatically after being advanced 31 days 4 Pressing button A allows correction of the year number of years elapsed Since the most recent leap year Press button A and align the function hand at the position corresponding to the year number of years elapsed since the most recent leap year Interpretation of Year Position of Function Hand L ap VOarsnc6 cas heeiteasne eee Sh eee ees 0 minutes position 1 year after most recent leap year 6 minutes position 2 years after most recent leap year 12 minutes position 3 years after most recent leap year 18 minutes position Leap year Quick Reference Table for No of Years Since Most Ist year 2nd year ded year
6. reference Recharging time refers to the amount of time the watch is continuously exposed to light Charge Rates from Indoor Light Source Indoors Office Fluorescent at 6 Distance 500 lux Incandescent at 20 Distance 3000 lux One Day One Second Full One Day One Second Full Use Step Charge Use Step Charge 2 5 Hours 48 Hours 338 Hours 11 Minutes 7 Hours 43 Hours Charge Rates from Outdoor Light Source Outdoors Cloudy Outdoors Bright Sun 10 000 lux 100 000 lux One Day One Second Full One Day One Second Full Use Step Charge Use Step Charge 5 Minutes 2 5 Hours 12 Hours 1 5 Minutes 1 Hours 4 Hours Full recharging time Time required for recharging the watch from the stopped state to fully charged Charging time for 1 day of operation Time required for recharging the watch to run for 1 day at 1 second interval movement 7 NOTES REGARDING HANDLING OF THIS WATCH lt Try to keep the watch charged at all times gt Please note that if you wear long sleeves the watch can easily become insufficiently charged as a result of it being concealed and unable to be exposed to light When you take the watch off try to place it in as bright a location as possible to ensure that it always keeps the correct time A CAUTION Charging Precautions e Avoid recharging at high temperatures over about 60 C 140 F since this may result in damage to the watch during recharging Examples Charging th
7. the life and maintain the good appearance of the metal watch bracelet the following recommendations are given m Be aware that since the watch and bracelet is worn next to the skin it collects dust and perspiration and becomes soiled if not cleaned regularly This is particularly true of the inner parts of the links or mesh of the bracelet m Soil and rust when present in a bracelet are dissolved by perspiration and can cause Staining of cuffs and irritation of the skin in some instances m Heavy perspiration should be wiped off the watch and bracelet with a soft dry cloth The bracelet should be cleaned occasionally by using an old toothbrush and warm soapy water after which the soap is thoroughly rinsed with clear water and the bracelet dried completely The foregoing manner of Cleaning should not be done if the watch is not water resistant but should instead be done by your jeweler CARE FOR STRAPS LEATHER m Heavy perspiration if not removed from a leather strap can wash out the natural oils and cause the leather to become dry and deteriorate Any moisture should be blotted with a soft dry cloth or paper towel and the strap allowed to dry naturally E Salt residue and soil can be removed from the leather by Cleaning with a dampened soft cloth and mild soap or saddle soap m Occasionally the inside surface of the strap should be cleaned by using a soft cloth dampened with alcohol m The strap should always be worn a little l
8. the watch is recharged by exposing to light after it has stopped the second hand moves to the SET position to inform the wearer that the time is incorrect Although the 24 hour hand hour hand and minute hand will begin to move after the second hand moves to the SET position since the time is incorrect reset the time and date after sufficiently charging the watch Notes e Crown and button operations will not function except for time and calendar setting operations e When the crown is pulled out to position 2 time correction position in the time or date setting mode the time setting warning feature is Q canceled The second hand will remain stopped at the SET position unless the crown is pulled out to position 2 and the time is set e In the case the watch has stopped due to E gt insufficient charging a minimum of 30 minutes are required until the watch changes to the time setting warning display even if sufficiently exposed to light lt Overcharging Prevention Feature gt The overcharging prevention feature is activated when the secondary battery is full charged so that it is not charged further lt Power Save Feature gt When power is no longer generated as a result of light not shining on the solar cell when the watch is in the time calendar mode or local time mode the second hand moves to the 0 seconds position and stops to save power by reducing current consumption The 24 hour hand hour hand and
9. able for SCUBA diving Water resistance of our timepieces is measured in BAR or Barometric Pressure Each BAR of pressure is equal to 14 5 pounds per square inch of pressure Water resistance is measured when the watch is at a static or motionless state As the watch is moved in water such as from the motion of swimming pressure is added from velocity While you may be swimming in a pool at surface level the watch may be experiencing forces equal to that of 100 feet of water pressure 3 BAR Diving into a pool can cause forces on the watch to exceed those pressures As such you should always allow a margin of safety when exposing your watch to moisture Never push the limit of the degree of water resistance of your timepiece A primary factor to keep in mind about water resistance is that periodic maintenance is needed to maintain original factory specifications for water resistance When a watch is new it meets specifications for water resistance as indicated on the case back However as the watch ages the gaskets that seal the watch become dry and brittle diminishing its water resistant quality Exposure to environments such as chlorinated pools salt water or soaps from showering can accelerate drying of the gaskets We recommend that the gaskets be changed at least every 18 to 24 months to maintain the water resistant quality of your timepiece If the watch is frequently exposed to chlorinated pools soaps salt water etc w
10. ck the crown once to the right or left When the hands are not stopped manually they stop automatically after being corrected by 12 hours Alarm setting position e Set the alarm while making sure not to mistake AM and PM by referring to the 24 hour hand 4 Return the crown to the normal position after setting the alarm time Switching alarm ON and OFF The alarm is switched ON and OFF each time button A is pressed when the crown is pulled out to Position 1 or Position 2 in the alarm mode Alarm Tone Monitor When button A is pressed with the crown in the normal position in the alarm mode the alarm tone sounds for as long as button A is pressed Stopping the Alarm Tone Press either button A or B to stop the alarm tone while it is sounding Return to Table of Contents 4 Return to Table of Contents lt gt 14 ALL RESET This watch may not function properly as a result of being subjected to the effects of static electricity or strong impact and so forth When this happens set the hands of the watch to their respective base positions according to the following procedure after performing the all reset procedure Q Position Correction When performing the all reset procedure first make sure that the watch is fully charged and the second hand is moving in one second increments If the all reset procedure is performed when the watch is insufficiently charged it may not function p
11. e recommend that the gaskets be changed on a yearly basis From time to time you may notice condensation that appears then goes away after a short period of time This is a normal occurrence and happens primarily from sudden temperature changes When there are sudden temperature changes such as entering a cool building from the hot out of doors or jumping into pool on a hot day the watch may fog Conversely if you go to the cold outdoors from a warm building fogging may occur As long as the fogging clears in a short period of time there is no need for concern Be sure the crown is completely pushed in prior to any contact with moisture If your model is equipped with a screw down crown be sure it is properly seated against the case Do not operate the crown or any push button when the watch is wet as this may allow the entrance of moisture If at anytime you notice moisture in your timepiece that does not clear in a short period of time you should send your timepiece as soon as possible to the nearest Authorized Service Center for inspection You can determine the level of water resistance of our watches from the markings on your case back Additionally models that are water resistant to 100 or 200 meters have an indication on the dial as well The case backs and dials are normally marked as follows The case back has no indication of water resistance This indicates the watch is a non water resis
12. e watch in close proximity to an incandescent lamp halogen lamp or other light source that can easily reach high temperatures charging the watch in a location that reaches high temperatures such as on a car dashboard e When charging the watch with an incandescent lamp always make sure the watch is at least 50cm 20in away from the lamp so that it does not reach excessively high temperatures during charging Return to Table of Contents 4 Return to Table of Contents 4 gt 8 SWITCHING THE MODE DISPLAY FUNCTION This watch is equipped with four modes consisting of time calendar chronograph local time and alarm Since the mode changes when the crown is turned the current mode can be confirmed with the mode hand Modes Display Function ALM gt TME Alarm Mode Time Calendar Mode CHR L TM gt Chronograph 0 Position 9 HAND O POSITION CHECK AND CORRECTION Before using this watch check that the functions of the watch operate properly by performing the following procedure O Position This refers to the base position of each hand that enables the watch to function properly O Position Check 1 Turn the crown to switch the watch to the chronograph CHR mode 2 Pull the crown out to Position 1 to check the O position function hand and date wheel correction mode Confirm that the 24 hour hand hour hand minute hand second hand and function hand rapidly advance to the 0 position and
13. minute hand continue to keep the correct time even though the second hand is stopped Furthermore the calendar is corrected in coordination with the 24 hour hand hour hand and minute hand During normal hand movement when power generation is resumed after the second hand stops at the 0 seconds position the second hand is rapidly advanced to the correct seconds and begins one second interval movement However when the insufficient charging warning feature has been activated the second hand moves to the CHARGE position and stops and when the time setting warning feature has been activated it moves to the SET position and stops When the watch has stopped the second hand moves to the STOP position and remains stopped Note During the time the rechargeable battery is fully charged and the overcharging prevention feature is operating the power save feature does not operat ven when power generation is interrupted as a result of not exposing the solar cell to light Similarly the power save feature will also not operate when the secondary battery has temporarily become fully charged as a result of exposure to intense light Return to Table of Contents 4 gt Return to Table of Contents lt gt 6 GENERAL REFERENCE FOR CHARGING TIMES The time required for recharging varies according to the model of the watch color of the dial etc The following times are shown below to serve only as a
14. ng Warning Feature gt Regardless of the display of the watch at the time when the watch becomes insufficiently charged the watch changes to the time display and the second hand moves to the CHARGE position to inform the wearer that it is insufficiently charged After the second hand moves to the CHARGE position the watch changes to the time display in the order of the 24 hour hand hour hand minute hand and date wheel function hand Although the watch continues to keep time accurately at this time the watch stops after about 5 days have elapsed roughly 2 days in the case the hands have been moved to switch the time when the insufficient charging warning feature is activated When this happens charge the watch by exposing to light so that it returns to one second interval movement However since the time is incorrect when the watch is exposed to light and changes to the insufficient charging warning display after it has stopped due to insufficient charging set the time after sufficiently charging the watch Return toe Table of Contents 4 Return to Table of Contents 4 gt Notes e Chronograph measurement stops and the chronograph is reset even when measurement is in progress e The set time time difference is retained for the local time e The alarm will not sound even if it is set Crown mode switching and button operations will not function lt Time Setting Warning Feature gt When
15. nt time zone to be set separately from the current time Local time is set by performing a time difference correction in 1 hour units based on the current time time of the time mode TME The minute and second hands move in coordination with the current time Time Difference Correction Procedure 1 Turn the crown to set the mode hand to the local time L TM mode 2 Pull out the crown to Position 2 local time setting position 3 Click the crown to the right or left to correct the time differenc e When the crown is clicked to the right the hour hand moves by I hour in the clockwise direction e When the crown is clicked to the left the hour hand moves by 1 hour in the counter clockwise direction Local time setting position Note The hour hand is not advanced rapidly even if the crown is continuously clicked two or more times Perform correction accurately I hour at a time Furthermore the range of time difference correction is 23 hours based on the current time 4 Always make sure to return the crown to the normal position after correcting the time difference Note If the hour hand passes 12 00 AM midnight during correction the date is advanced by I day following completion of hand movement If the time difference is corrected in the counter clockwise direction and the hour hand passes back over 12 00 AM although the date is corrected following completion of hand movement
16. oosely one finger space between wrist and strap to allow air to circulate thus Causing any moisture to evaporate RUBBER m Rubber straps should be washed frequently with mild soap and warm water using a soft brush m Thorough cleaning using the same method should especially be done after use in salt water E Solvents oils perspiration tanning lotion and salt can cause rubber to deteriorate if not removed mM NL s a YR A Marking Marking RA oP Water resistant on the Dial on the peg 2 1 gi characteristics Caseback Face washing Swimming Skin diving Scuba diving splashes diving diving with sweat without air tanks raindrops etc air tanks Non water resistant NONE NONE NO NO NO NO watch and must be kept away from water An ordinary water resistant NONE WATER OK NO NO NO watch and can withstand RESIST splashes sweat rain drops and etc for daily life use WR100M WATER For frequent use with WR10bar RESIST OK OK OK NO water It is not specially WR150M designed for scuba diving For skin and scuba diving WR200M WATER OK OK OK OK Usable up to the respective RESIST indicated depths See instruction book for further information Return to Table of Contents lt Return to Table of Contents lt 4 Water Resistance The water resistant quality of our timepieces is offered in varying degrees depending on the model This ranges from non water resistant models to those suit
17. rection Mode hand Note If the crown is pulled out to Position 2 when the date is changing the date wheel and function hand stop at the time and are then advanced by the remaining amount after the second hand is rapidly advanced to the 0 seconds position Return to Table of Contents 4 Return to Table of Contents lt gt 3 Click turn the crown to set the time 1 Clicking the crown once to the right causes the 24 hour hand hour hand and minute hand to move in the clockwise direction 2 Clicking the crown once to the left causes the 24 hour hand hour hand and minute hand to move in the counter clockwise direction e Turning the crown rapidly continuously clicking two or more times causes the hands to advance rapidly When stopping the hands click the crown once to the right or left When the hands are not stopped manually they stop automatically after being corrected by 12 hours 4 Return the crown to the normal position in synchronization with a telephone time signal or other time service Setting the Date The calendar function of this watch is a full auto calendar that changes the year month and date automatically including leap years e Turn the crown to switch the watch to the time calendar TME mode e When the crown is pulled out to Position 1 date correction position the second hand rapidly advances to the month display position D stored in memory while the function hand
18. rged everyday 4 NAMES OF COMPONENTS Return to Table of Contents 4 Return to Table of Contents lt gt 5 FUNCTIONS UNIQUE TO SOLAR POWERED WATCHES When the watch becomes insufficiently charged the following warning features will be activated to inform the wearer that the watch is insufficiently charged Normal Time Display Power Save Feature stops when light does net shine ont it the time is set after solar cell sufficiently charging Es y oa pig 4 When f A th TT generation i M Aipa when light shines on the solar cell t charged her i Time Setting Insufficient Charging Stopped Warning Feature Warning Feature The second hand rapidly advances The second hand rapidly advances The second hand rapidly advances to the SET position and stops to the CHARGE position and stops to the STOP position and stops if the watch continues to remain insufficiently charged without setting again becomes after the times bering g warning ly charged without setting the lime feature is activated Hote The watch will nol return to the normal lime display unless the time is set ater sutliciend charging The watch hands been to move when exposed to light Note A minimum of 30 minutes are required for the watch to switch to the time setting warming feature display even after the watch is sufficiently exposed to light once the watch has stopped due to insufticient charging lt Insufficient Chargi
19. roperly or remain stopped following the all reset procedure 1 Turn the crown to set the mode hand to the chronograph CHR mode 2 Pull out the crown to Position 2 0 position correction mode Each of the hands and date wheel moves to their respective 0 positions stored in memory and then stop 3 Press buttons A and B simultaneously and then release e Following a confirmation tone each of the hands perform a demonstration movement in the order of the function hand 24 hour hand hour hand minute hand and second hand to indicate that the all reset procedure is finished Note Following the all reset procedure make sure to properly reset each mode after performing O position correction for each hand before using the watch The watch will remain stopped and not run unless O position correction is performed Return to Table of Contents 4 gt Return to Table of Contents PRECAUTIONS ABOUT CARE AND HANDLING OF WATCHES TEMPERATURE CARE Avoid temperature extremes Exposing your watch to high temperatures such as placing it on the dashboard of a vehicle or use in a hot tub may cause the watch to malfunction shorten battery life or damage certain components Leaving the watch in extreme cold temperatures may cause irregular timekeeping until the watch returns to normal operating temperature SHOCK RESISTANT The watch may be worn while playing golf or other activities but avoid severe shock
20. rrection of 24 Hour Hand Hour Hand Minute Hand and Second Hand bee Ais Pull the crown out to Position 2 in the chronograph CHR mode to correct each hand Pressing button A causes the second hand to be corrected by one second at a time each time it is pressed Continuously pressing button A causes the second hand to advance rapidly Clicking the crown allows correction of the 24 hour hand hour hand and minute hand 1 Clicking the crown once to the right causes the hour and minute hands to move clockwise 2 Clicking the crown once to the left causes the hour and minute hands to move counter clockwise e Turning the crown rapidly clocking continuously two or more times causes the hands to advance rapidly When stopping the hands click the crown once to the right or left When the hands are not stopped manually they stop automatically after being corrected by 12 hours 10 SETTING THE TIME AND DATE Setting the Time 1 Turn the crown and align the mode hand at the time calendar TME mode Minute hand Hour hand 1 Date 2 When the crown is pulled out to Position 2 time correction setting position the second hand rapidly advances l positon to the 0 seconds position and stops o Tne seng Note When the second hand does not stop Second Sa hour hand hand does not stop at the 0 seconds position reset Normal positi eh iti Second hand Orme Posmon irae position in the O Position Cor
21. s such as dropping it on a hard surface MAGNETIC RESISTANT No problem should occur from using the watch around ordinary household electric appliances such as TV sets or stereos Keep away from magnets CHEMICAL GAS RESISTANT Do not expose the watch to chemicals or gases for long periods WATCH CLEANING Stains waterspots and accumulated dirt on the case crystal or band should be removed with a soft cloth to prevent damage and premature wear HANDLING OF WATER RESISTANT WATCHES Although water resistant watches are warranted steps should be taken to avoid damage that may result from accidents or mishandling m Do not operate the crown or push button in the water or while the watch is wet Tighten screw lock crown completely m Should the watch become immersed in water dry it off right away If the watch comes in contact with salt water be sure to rinse it thoroughly in warm fresh water to remove any trace of salt E f a watch is wet from cleaning or by accident never store it in a closed container It should be dried immediately or taken to a watchmaker or jeweler if moisture is inside the case to prevent damage from rust m Vital components necessary to resist the entrance of moisture deteriorate with time and use Gaskets crowns and other materials should be replaced every year or two to ensure lt gt CITIZEN that water resistant quality remains at factory specifications CARE FOR METAL BRACELETS To extend
22. s watch has stopped running because of insufficient charge of this rechargeable battery recharge this battery by exposing the solar cell to strong light such as the sunlight A rechargeable battery is used in this watch to store electrical energy This rechargeable battery is a clean energy battery that does not contain mercury or other toxic substances Once fully charged the watch will continue to run for about 9 months without additional charging when the power save feature is operating This rechargeable battery is not a user replaceable item e Power Save Feature When power generation stops as a result of light not shining on the solar cell during the time display or local time display the second hand stops at the 12 00 position and only the hour and minute hands move to save power When light once again begins to shine on the solar cell the second hand advances rapidly to the current seconds and returns to moving at one second intervals If light several tens of luxes does not shine on the solar cell for continuous 15 seconds this period depends on the design however and the second hand comes to the 12 00 position the watch enters the power save mode lt How to Use This Solar Powered Watch Properly gt To use this watch comfortably make sure to recharge it before it stops running completely Since there is no risk of overcharging Overcharging Prevention Feature it is recommended that the watch be recha
23. tant model and is not designed for contact with moisture at all Caution should be exercised to avoid any contact with moisture such as when washing your hands or from a rainstorm Water Resist This watch is designed to withstand water from accidental splashing such as from washing your hands or rain Any submersion into water may result in the entrance of moisture Water Resist 10BAR or W R 10BAR Dial marked WR100 This watch is designed to withstand water pressure up to 333 feet This includes water exposure from accidental splashing and rain but also from showering swimming in a pool and snorkeling Be sure to rinse the watch with fresh water after exposure to a chlorinated pool salt water soaps etc After rinsing with fresh water be sure to dry the exterior with a soft cloth Water Resist 20BAR or W R 20BAR Dial marked WR200 This watch is designed to withstand water pressure up to 666 feet This includes all exposure to water up to and including recreational SCUBA diving Be sure to rinse the watch with fresh water after exposure to a chlorinated pool salt water soaps etc After rinsing with fresh water be sure to dry the exterior with a soft cloth Special Note about Jacuzzis and Hot Tubs The various components used in the manufacture and assembly of your watch expand at various rates This results in a loss of the sealing capabilities of gaske
24. the date wheel displays 1 0 Positions of each Hand Base Positions 24 hour hand 24 00 Hour hand minute hand 00 00 Second hand 00 seconds Function hand 0 position 12 00 position Date wheel 1st Perform the 0 Position Correction when the hands and date wheel are not at the positions indicated above 0 Position Correction O Position Correction O Position Correction of Function Hand and Date Wheel 1 Pull the crown out to Position 1 in the chronograph CHR mode to correct the function hand and date wheel 2 Click turn the crown to the left to align the date wheel 1 Clicking the crown once causes the function hand to make four revolutions and the date to be corrected by one day 2 Turning the crown rapidly clicking continuously two or more times causes the function hand to advance continuously When stopping the functions hand click the crown once to the right or left When the function hand is not stopped manually it stops automatically after advancing 31 days The 12 00 position immediately after the date changes to the Ist in the 0 position of the function hand After correcting the date wheel to the 31st by turning the crown press button A to finely correct the function hand so that the function hand is aligned at the 0 position after the date wheel changes to the Ist Return to Table of Contents 4 gt Return to Table of Contents lt gt O Position Co
25. ts which may allow moisture to enter In addition heat from these sources can cause deformation of certain materials leading to mechanical failures For these reasons you should remove your watch before entering a hot tub or Jacuzzi Return to Table of Contents lt 4
26. ure range 5 C 35 C 41 F to 95 F Power save featur 10 C to 35 C operating temperature range 14 F to 95 F Time correction operating temperature range 5 C to 60 C 23 F to 140 F Time 24 Hours Hours Minutes and Seconds Display Calendar Date display by a date wheel with continuous function advance function Month display by second hand Year display by function hand from most recent leap year years elapsed Additional Functions e Power Save Featur e Insufficient recharging warning device e Time setting warning feature e Overcharging prevention feature e Chronograph 60 minute measurement 1 20 second units e Local time time difference correction 1 hour e Alarm 24hr clock ON OFF alarm monitor alarm Continuous running times Fully charged to stopped Approximately 9 months while operation of power save feature 2 second interval movement to stopped Roughly 5 days roughly 2 days in the case the hands have been moved to switch the time when the insufficient charging warning feature is activated Battery Eco Drive rechargeable Manganese Titanium battery Not user replaceabl Return to Table of Contents 4 Return to Table of Contents lt gt 3 BEFORE USING This watch is a solar powered watch Before using this watch expose its solar cell to light sufficiently to charge its rechargeable battery If thi
Download Pdf Manuals
Related Search