Home

JVC DR-DX7S DVD RECORDER , HARD DISC DRIVE RECORDER and MINI DV RECORDER COMBO UNIT

1. M SAT CONTROL SET ey 23 The following procedure is required if you receive satellite channels through a satellite receiver Approximately 20 seconds before the SHOWVIEW timer programming gt pg 48 or Manual Timer programming gt pg 50 starts the unit sets its input mode to L 2 and automatically switches the satellite receiver s channels using the provided Satellite Controller Installing Satellite Controller Place the Satellite Controller so that the path between its transmitter and the satellite receiver s remote sensor is unobstructed 2 Fix securely using the adhesive strip attached on the back of the Satellite Controller 3 Be sure to connect the unit s L 2 IN DECODER connector to the satellite receiver s 21 pin SCART connector NOTE When connecting your satellite receiver refer to its instruction manual 4 Connect the Satellite Controller to the SAT CONTROL connector on the rear panel Setting Satellite Receiver s Brand And Channel After installation set the satellite receiver s brand and channel correctly otherwise the Satellite Controller cannot work correctly e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD 1 Turn on the satellite receiver s power 2 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit 3 Press SET UP to access the Main Menu screen 4 Press
2. ATTENTION e It may take a few seconds to start playback This is not a malfunction e Forward reverse high speed search and other operations cannot be performed while playback is stopped 1 Press DV HDD DVD SELECT on the unit repeatedly or HDD on the remote so that the HDD lamp lights up on the unit 2 Press to start playback e The Library Database Navigation also enables you to search and select the desired programmes gt pg 54 Press IM to pause playback e To resume normal playback press P 4 Press stop playback NOTE When the Library Database Navigation screen appears choose a thumbnail image of the desired title on the TV screen then press ENTER c pg 54 e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD so that the HDD lamp lights up on the unit CABLE SAT Hoo HDD gt 4 4 510 510 om High Speed Search During playback press for forward high speed search or 44 4 for reverse high speed search e Each press of the button increases the search speed for each direction e To resume normal playback press Still Picture Frame By Frame Playback 1 Press to pause during playback 2 Press SLOW 44 or SLOW gt gt to activate frame by fram
3. Filename DX7S_10Navigation fm DX7S 00 book Page 59 Tuesday September 14 2004 6 11 PM Playback With MP3 WMA JPEG Navigation DVD DVD MEN Audio RAM us SVCD CD This unit can play back discs that MP3 WMA sound files and JPEG image files taken with digital still cameras or other devices are recorded The MP3 WMA JPEG Navigation enables you to search and select the desired files recorded on CD R RW or CD ROM discs very easily e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD to select the DVD deck 1 Selected group number total number of groups on the disc 2 Selected file number total number of files in the group that contains the selected file Elapsed time MP3 only Name of the selected file Group name oe 14 September 2004 18 11 eee Selected file NOTE If there are more than 100 files the rest of the files are not displayed In this case press ON SCREEN to display them on the TV screen Masterpage Right Locating The Desired Group And Tracks NAVIGATION ON HDD DVD DECK c 59 Load a disc 2 Press NAVIGATION Press AV lt D to select ORIGINAL then press ENTER 4 Press AV to select the desired group then press ENTER am list of files in the selected ITS SHOWTIME 1 62 group appears WE WORLDTSWAP
4. 2 If the player has S VIDEO output connector connect the player s AUDIO OUT and S VIDEO OUT connectors to your unit s AUDIO and S VIDEO input connectors on the front panel 2 Load a Mini DV cassette with the erase protection switch set to REC 3 Press DV HDD DVD SELECT on the unit repeatedly or DV on the remote so that the DV lamp lights up on the unit 4 Press PR to select F 1 5 Press lt lt gt gt and to determine the edit in point the beginning of the segment to be replaced e Be sure to engage the Still mode at the edit in point Press INSERT to engage the insert editing mode e Your unit enters the Insert Pause mode e The TV screen changes from the still picture to the input source you are going to record 7 Load the source cassette and play back the segment that is to be inserted When you reach the start of the section of the source tape that you wish to insert press to start the tape in your unit Insert editing begins at this point 8 Press I to stop recording on the DV deck to end insert editing NOTES e Once the Insert Editing starts you cannot use the other deck e All necessary cables can be obtained from your dealer e Insert Editing cannot be performed on a Mini DV cassette that has had its erase protection switch set to SAVE e When Insert Editing is performed on a tape that has been recorded on another video recorder the inserted portion may appear d
5. Received A2 Stereo A2 Bilingual ES Regular Monaural exem NICAM Stereo NICAMCD NICAM Bilingual CH TIE NICAM Monaural NICAM NOTES e SUPERIMPOSE must be set to AUTO Otherwise the on screen displays will not appear gt pg 77 e If the quality of stereo sound being received is poor the broadcast might be received in monaural with better quality Selection Of The Audio Channel To Be Recorded On A Disc When a programme is recorded on a DVD RAM or DVD RW disc in VR mode all audio channels of the receiving programme are recorded on the disc When you record a programme on a DVD R or DVD RW disc in video mode select the desired audio channel NICAM or MONO to be recorded on the disc gt pg 76 NOTE Before playing back a programme recorded in stereo or a bilingual programme refer to Audio Channel Selection gt pg 29 e Tuesday 14 September 2004 B Lan Filename DX7S 07HDD Operation fm DX7S 00 book Page 40 Tuesday September 14 2004 6 11 PM Basic Playback S 40 en BASIC OPERATIONS ON HDD DECK Playback Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD DV HDD DVD SELECT CABLE SAT Hoo HDD
6. DX7S 00 book Page 14 Tuesday September 14 2004 6 11 PM 14 INDEX On Screen Display DVD deck When SUPERIMPOSE is set to AUTO and ON SCREEN on the remote control is pressed various operational indicators appear on the TV screen To clear the operational indicators press ON SCREEN twice When playing back a recorded title Playback title number Playback chapter number Disc remaining time Current status playback Audio mode Current received recording channel position number On playback background Bar meter Name of title or play list currently being played back Current playback point Recorded mode Live Memory mode recording When recording D an 12 11 35 FR360 1 Recording point Current status recording Current time Recording channel number When pressing REC MODE Appears for eight seconds Disc type Current recording speed Remaining disc time for each recording speed Recording speed feo f When pressing 6 during recording 1 WR 2 30 Recording time for Instant Timer Recording ITR mode Tuesday 14 September 2004 me Filename DX7S 05Name fm DX7S 00 book Page 15 Tuesday September 14 2004 6 11 PM On Scre
7. 1 2 G 0 9 6 7 9 Glelolc PR coco me GIO c W c EJ C m 1630 EA REC MODE OOOO 1 Press DV HDD DVD SELECT on the unit repeatedly or HDD on the remote so that the HDD lamp lights up on the unit 2 Press PR or the number keys to select the channel you wish to record 3 Press REC MODE repeatedly to select the recording mode then press ENTER e Each time you press REC MODE the recording mode changes as follows XP SP LP EP gt FR60 FR360 gt FR420 FR480 gt Back to the beginning The value is selectable from 1 to 6 hours in 5 minutes interval by pressing lt gt repeatedly after selecting FR60 FR360 To change the value in 30 minutes interval press and hold lt gt e For details on the recording mode see the right column 4 Press on the unit to start recording Or while holding 6 press gt on the remote control e The HDD recording lamp lights up on the unit 5 Press twice to stop recording e Pressing W once displays the confirmation message to stop recording Press lil again to terminate recording NOTES e Continuous recording for over 48 hours is not possible e It is not possible to record on both DVD and HDD simultaneously lan Pause recording on HDD deck It is not possible to pause recording Pressing I initiates Live Memory Playback However it is still possible to pa
8. DV equipment The following on screen display for DV dubbing appears when ON SCREEN is pressed while the channel has been set to DV Leo Eire wert 1 2 1 Remote control switch To switch between the devices operable by the remote control unit The unit is operable when the remote icon 7 displayed faces to the left while the DV device is operable when the remote icon is facing to the right 2 Auto capture button Select to start or pause the dubbing If ENTER is pressed when the DV device is in the pause condition preroll editing where it is possible to dub with a start time that is highly accurate will be activated When the DV device cannot be operated from the unit such as in camera mode proceed with normal recording pg 35 38 Preroll editing refers to the playback after the DV tape is slightly rewind For DV devices that do not support the 1 speed the rewinding time may be longer 3 Sound monitor switch For selecting the desired sound format for recording It is not selectable during dubbing 1 Connect a camcorder or DV equipment to the DV IN connector on the unit s front panel 2 Press DV HDD DVD SELECT on the unit repeatedly or HDD on the remote so that the HDD lamp lights up on the unit 3 Press PR to set the channel to DV 4 Press ON SCREEN e The on screen display for DV dubbing appears
9. e mese RR mi tile Mini DV DVD amp HDD VIDEO RECORDER DR DX7S FIRST qe See FD AUTO SET UP 2 on PAGE 8 DVD det DO eos 5 SHOWVIEW DELUXE INSTRUCTIONS Te a mal 2 en SAFETY FIRST an Filename DX7S_02Safety fm ails DX7S 00 book Page 2 Tuesday September 14 2004 6 11 PM Masterpage LeftO 1 IMPORTANT A Safety Precautions Please read the various precautions on page 2 and 3 before installing or operating the unit The rating plate and the safety caution are on the rear of the unit It should be noted that it may be unlawful to re record pre WARNING DANGEROUS VOLTAGE INSIDE recorded tapes DVDs or discs without the consent of the WARNING TO PREVENT FIRE OR SHOCK HAZARD owner of copyright in the sound or video recording broadcast or cable programme and in any literary dramatic MOSTRE PE THIS UNIT TO RAIN OR musical or artistic work embodied therein CAUTION A UNIT IS A CLASS 1 LASER PRODUCT HOWEVER THIS CAUTION UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE W When you are not using the unit for a long period of time it is HAZARDOUS RADIATION EXPOSURE IF DIRECTED BE recommended that you disconnect the power cord from the mains outlet THE UNIT CORREGTLY AS W Dangerous voltage inside Refer internal servicing to a qualified service personnel To prevent electric shock or fire WHEN THIS UNIT IS PLUGGED INTO THE WAL
10. wwvication gt 0 07 01 43 5 Press AV to select the desired item then press ENTER The unit starts playback from the TS HOWE et S selected item CL e The unit stops when all items in the selected group are played RIS DA back NOTES e If you press SELECT P instead of ENTER in step 4 the unit starts playback from the first file of the group e JPEG files are played back as a slide show at the set intervals gt pg 33 e If a file name includes any 2 byte character the unit may not show the file name correctly e The order of the groups and items shown in steps 4 and 5 may differ from the order shown on your PC gt 0 07 01 3 Ei e Don Filename DX7S 11Editing fm DX7S 00 book Page 60 Tuesday September 14 2004 6 11 PM 60 en EDITING Dubbing e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT HDD olo Dv DVD O OOOE MARK DUBBING IO ENTER YG WO CJ e C3 ll loo600 o ON SCREEN NOTES e It is not possible to dub simultaneously when timer programming is set Select either dubbing or timer programming e The order of the index which are d
11. SP LP EP gt FR60 FR360 gt FR420 FR480 gt Back to the beginning The value is selectable from 1 to 6 hours in 5 minutes interval by pressing lt gt repeatedly after selecting FR60 FR360 To change the value in 30 minutes interval press and hold lt gt e For details on the recording mode see the right column 5 Press on the unit to start recording Or while holding 6 press gt on the remote control e The DVD recording lamp lights up on the unit 6 Press and on the remote control simultaneously to pause recording e To resume recording press and simultaneously 14 September 2004 18 11 BASIC OPERATIONS ON DVD DECK c 35 Masterpage Right 7 Press twice to stop recording e It takes about 10 seconds to end the writing session when you stop recording NOTES e It is recommended to format a DVD RAM disc before use if you use the disc on this unit for the first time e When using a brand new DVD RW disc format the disc either in VR mode or in Video mode gt pg 82 e Recordings made on DVD R RW disc must be finalised to play back on other DVD players Perform Finalise A Disc DVD Deck Only r pg 83 e You can record up to 99 programmes and 999 play lists on each disc e Some programmes can only be recorded one time e When recording is started an index of the first part of recording is automatically recorded gt pg 53 To record satel
12. 5 Press lt D to select 66 then press ENTER to display the remote icon facing to the right for the DV equipment Press REC MODE repeatedly to set the recording mode 7 Locate the point from where you want to start dubbing then stop or pause playback by pressing the following buttons on the remote control gt gt gt lt lt E 11 e To play back in slow speed 1 10 of the normal speed press to pause playback then press 44 or DP e To play back frame by frame press to pause playback then press repeatedly Each press of advances a frame e To change the playback direction press 44 or gt 8 Press lt I gt to select then press ENTER repeatedly until the desired sound track appears on the TV screen AUDIO 1 Select this to record the original stereo sound played back on the connected DV equipment AUDIO 2 Select this to record the dubbed stereo sound played back on the connected DV equipment MIX Select this to record the sound of both AUDIO 1 and AUDIO 2 e Note that this selection is not available when the source programme is recorded in 16BIT 48 kHz mode 9 Press lt 1 to select Ei then press ENTER The dubbing starts e Playback on the external DV equipment and recording on the unit should start simultaneously To pause dubbing press lt gt to select mj then press ENTER Both the unit and the external DV equipment pause dubbing Pres
13. 5 of Manual Channel Set pg 79 2 Press AV lt I gt to select the channel you want to delete 3 Press X to delete a channel The channel next to the cancelled one moves up one line e Repeat steps 2 3 as necessary 4 Press SET UP to close the Confirmation screen Change Station Channel Position 1 Perform steps 1 4 of Manual Channel Set gt pg 79 2 Press lt I gt to select MOVE then press ENTER Press AV lt D to select the channel you want to move then press ENTER 4 Press AV lt I gt to select the new channel position then press ENTER Example If you moved the station in position 4 to position 2 the stations originally in positions 2 and 3 each move down one space SG INITIAL SET UP gt MANUAL CH SET B INITIAL SET UP gt MANUAL CH SET PR CH 10 CH ID BUM NECNEETE NM NONI NNI LS NEN Le pos uM PR CH 10 CH NM ts 1000 av E EON el mil Ea a MOVE EDIT RETURN MOVE EDIT RETURN e Repeat steps 3 4 as necessary 5 Press SET UP to close the Confirmation screen When Receiving Scrambled Broadcast HDD amp DVD Deck Only Set L 2 SELECT to DECODER pg 67 2 Perform steps 1 5 of Manual Channel Set pg 79 Press AV lt D to select the channel position
14. BASIC OPERATIONS ON DVD DECK Basic Playback DVD DVD Audio RAM VIDEO cD e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD DV HDD DVD 4 SELECT Qeeo se CABLE SAT Hos ATTENTION e It takes approximately 30 seconds to read a disc depending on the type and condition of the disc since this unit is multi disc compatible DVD RAM DVD RW DVD R It may even take several minutes when a disc is dirty scratched or warped e It may take a few seconds to start playback This is not a malfunction e Forward reverse high speed search and other operations cannot be performed while playback is stopped eret 14 September 2004 18 11 Masterpage RightO EN 25 To play back an MP3 JPEG disc see Playback With MP3 WMA JPEG Navigation gt pg 59 Load a disc e For details refer to Placing A Disc gt pg 8 e Pressing also closes the disc tray e Playback begins automatically if an auto playback DVD disc is loaded 2 Press DV HDD DVD SELECT on the unit repeatedly or DVD on the remote so that the DVD lamp lights up on the unit Press gt to start playback e If you load a DVD disc whose region code does not match the unit REGION CO
15. DVD DVD Audio Tz E32 Edd Ed E2 Ea c3 You can obtain optimal picture quality by selecting whether the content on the disc is processed by field video source or by frame film source 1 Set the unit to the progressive scan mode gt pg 84 2 Press ON SCREEN twice to access the on screen bar Press lt gt to select E3 then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO 4 Press AV to select the desired option then press ENTER AUTO This mode automatically detects film and video content for progressive playback When film content is found flag detection is used to invoke playback of film data in full screen When video content is found pictures from multiple fields are used to detect sections with movement and then this movement undergoes advanced image processing for output of sharp detailed progressive images without any reduction in image quality where movement occurs Normally operation in this mode is recommended FILM Suitable for playing back a progressive scanned film source disc VIDEO Suitable for playing back a video source disc The outlines on the played back pictures will be soft To clear the on screen bar Press ON SCREEN NOTE When the progressive mode is set be sure to set L 1 OUTPUT to COMPONENT F pg 67 Progressive scan is output only from COMPONENT VIDEO OUT connectors Programme Playback
16. VPS PDCO 1 Load a recordable disc if recording to DVD 2 Press PROGRAMME to access the programme top screen Press AV lt gt to select SHOWVIEW then press ENTER e When PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME appears on the TV screen you need to cancel some of the reserved programmes gt pg 51 4 Press the number keys to enter the SHOWVIEW number of a programme you wish to record OR Press AV lt gt to select the desired number key on the screen then press ENTER Repeat to enter all required numbers e If you have made a mistake press AV lt gt to select DELETE or DELETE ALL then press ENTER and input the correct number before you press ENTER again 5 Press AV to select RECORD TO then press ENTER Press AV to select the desired recording deck then press ENTER 6 Press AV lt gt to select CONFIRM then press ENTER e If the number you entered is invalid SHOWVIEW NO ERROR CONFIRM SHOWVIEW NO THEN RETRY appears on the TV screen Input a valid SHOwVIEW number e If GUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAMME THEN RETRY appears on the TV screen set Guide Programme Numbers manually gt pg 78 3 PROGRAMME gt SHOWVIEW 1 2 SHOWVIEW NO SELECT WITH 42 gt THEN PRESS ENTER PRESS PROGRAMME TOEXIT DELETE O RECORD TO o SuowViEW CONFIRM EXT 8 Press AV to select the desired recording opt
17. e It is impossible to record or edit DVD R RW discs recorded on other devices even if they have not been finalised e It is impossible to overwrite recorded areas of DVD R discs e Available recording capacity does not increase even if a recorded programme is deleted from a DVD R disc After finalising After a DVD R RW disc Video mode has been finalised it is possible to play back the recorded programmes video and or audio on a standard DVD video player as a DVD VIDEO disc e Edited titles are displayed as the DVD menu in video mode e t is impossible to record edit or delete the data either in video mode or in VR mode e Either in video mode or in VR mode although the disc can be played back on DVD players from other manufacturers sometimes it may not be possible to play back depending on the disc and recording conditions e It is impossible to record on CD R RW or DVD R discs used for authoring e It is impossible to record onto DVD R RW Video mode discs broadcasts that allow you to copy once The copy once programmes can only be recorded onto DVD RW discs formatted in VR mode NOTE The following may result if you play back a DVD R disc recorded on another unit e The disc does not play e A mosaic pattern block noise appears on the screen e Video or audio may be dropped out e The unit stops during playback 2 CONTENTS MENU 81 Sister Princess ED2 14 11 0 55 PR12 lt HDD MN26 82 GALAXY ANGEL
18. e When using a monaural camcorder connect its AUDIO OUT connector to the AUDIO L input connector on your unit 2 If the camcorder has an S VIDEO output connector connect the camcorders AUDIO OUT and S VIDEO OUT connectors to the unit s AUDIO and S VIDEO input connectors on the front panel 3 If the camcorder has a DV IN OUT connector connect the camcorder s DV IN OUT connector to the unit s DV IN OUT connector 2 Press DV HDD DVD SELECT on the unit repeatedly to select the recording deck Press to select F 1 or DV e Set F 1 INPUT to VIDEO for the VIDEO input connector or S VIDEO for the S VIDEO input connector depending on the connector being used gt pg 68 4 Press REC MODE repeatedly to set the recording mode 5 Start playback on the camcorder slightly before the actual point from where you wish to start dubbing 6 Press on the unit to start recording Or while holding 6 press gt on the remote control The dubbing starts 7 Press on the unit then stop playback on the camcorder NOTES e All necessary cables can be obtained from your dealer e Refer to the camcorder s instruction manual for operating procedure e The quality of dubbed picture becomes poorer than that of the original e When you are editing through the DV IN OUT connector the unit will stop if the player begins playing a blank portion of tape or the signal is interrupted e When
19. then press ENTER 4 Press AV lt gt to select TITLE then press ENTER 5 Press A V gt to select indexes small pictures of desired original recordings and or play lists then press MARK After selecting all indexes you want to dub press ENTER e You can select up to 8 original recordings and or play lists 6 Press lt I gt to select EXECUTE or AUTO PWR OFF then press ENTER to start dubbing EXECUTE Select this to continue the dubbing operations AUTO PWR OFF Select this to continue the dubbing operations and turn off the unit after dubbing While the dubbing screen is displayed you can also select this mode by pressing DUBBING CANCEL Select this to cancel dubbing operation 7 Press lt D to select EXECUTE then press ENTER for confirmation The dubbing screen appears for 5 seconds NOTES e It is not possible to dub play lists on DVD discs e t is not possible to dub pre recorded DVD VIDEO discs e It is not possible to dub Video CDs SVCDs or Audio CDs Tuesday 14 September 2004 me e an Filename DX7S 11Editing fm Is DX7S 00 book Page 62 Tuesday September 14 2004 6 11 PM 62 en EDITING Dubbing From DVD To DV It is possible to perform dubbing from the DVD deck to the DV deck 1 Load the disc you want to dub onto the DVD deck and a Mini DV cassette with the erase protection switch set to REC to the DV deck 2 Press DUBBING to access the Dubbing Menu scre
20. 4 Connect the L 1 IN OUT connector on the rear panel of the unit and the TV s 21 pin SCART connector with a supplied 21 pin SCART cable e The L 1 IN OUT connector accepts and delivers either composite signal regular video signal Y C signal or RGB signal e Set your TV to the VIDEO or AV Y C or RGB mode according to the type of your TV s SCART connector W S Video Connection To connect to TV s S VIDEO input and AUDIO input connectors 1 Perform 4 3 in Basic Connection 2 Connect the unit s S VIDEO OUT connector to the TV s S VIDEO input connector 3 Connect the unit s AUDIO OUT connectors to the TV s AUDIO input connectors e With S VIDEO connection you cannot use the Preset Download function gt pg 19 e If your TV is not stereo capable use the units AUDIO OUT connectors to connect to an audio amplifier for Hi Fi stereo sound reproduction Component Video Connection To connect to TV s component video input connectors 1 Perform 4 3 in Basic Connection 2 Connect the unit s COMPONENT VIDEO OUT Y Ps Pn connectors to the TV s component video input connectors 3 Connect the unit s AUDIO OUT connectors to the TV s AUDIO input connectors e You can obtain high quality component video pictures e If your TV is not stereo capable use the units AUDIO OUT connectors to connect to an audio amplifier for Hi Fi stereo sound reproduction using the
21. Om E3 To clear the bar Press ON SCREEN To cancel the simulated surround effect Press ENTER to clear 3D ON from the screen NOTES e Simulated Surround Effect works correctly only when playing back a title recorded in multichannels e Simulated Surround Effect does not affect the DVD VIDEO bitstream signal from the DIGITAL AUDIO OUT connectors e When Simulated Surround Effect is activated the settings of ANALOG AUDIO OUT and D RANGE CONTROL are disabled gt pg 75 Adjusting The Picture Quality DVD DVD Audio RAM VIDEO 0 You can obtain optimal picture quality by selecting an appropriate picture mode 1 Press ON SCREEN twice to access the on screen bar 2 Press lt D to select then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 DVD CINEMA AUTO me 4ec5 9 Press AV to select the desired option then press ENTER NORMAL Normally select this option CINEMA Suitable for a movie disc etc SHARP Clearer sharper edged picture when viewing images with lots of flat same coloured surfaces such as cartoons SOFT Select this option when too much noise appears To clear the on screen bar Press ON SCREEN efe V Filename DX7S 06DVD Operation fm DX7S 00 book Page 33 Tuesday September 14 2004 6 11 PM Setting The Progressive Mode
22. 60 Top Menu Button TOP MENU gt pg 26 D AV lt P Buttons gt pg 21 Menu Button MENU gt pg 26 B Reverse Skip Button i gt pg 26 42 43 Previous Button PREVIOUS gt 29 D Reverse Search Button lt 4 lt 4 HDD amp DVD deck gt pg 26 42 Rewind Button 4 DV deck gt pg 44 Reverse Slow Button SLOW gt pg 27 Record Button 6 gt pg 35 38 D Jump Button JUMP pg 43 Recording Mode Button REC MODE gt pg 35 38 Remain Button REMAIN gt pg 28 36 D Display Button DISPLAY gt pg 28 36 S S INDEX EN 13 D VPS PDC Recording Button VPS PDC9 pg 49 Audio Button AUDIO pg 29 Subtitle Button SUBTITLE gt pg 28 TV CABLE SAT DVD switch gt pg 21 DVD STANDBY ON Button DVD 0 1 TV CBL SAT STANDBY ON Button TV CBL SAT 1 pg 71 DVD Button r pg 25 This button will not function during navigation mode or set up mode TV Volume Buttons 21 gt pg 71 Programme Buttons PR 4 gt pg 35 71 Memo Button MEMO gt pg 54 57 Mark Button MARK gt pg 27 Programming Button PROGRAMME gt pg 48 50 51 6 Edit Button EDIT pg 54 Navigation Button NAVIGATION gt pg 53 Enter Button ENTER r pg 21 Return Button RETURN gt pg 29 31 48 Forward Skip Button gt gt gt pg 26 42 43 Next Button NEXT pg 29
23. COMPLETED appears on the TV screen Press ENTER to end e The tape will automatically be rewound NOTES e When there are blanks on the tape of more than 2 seconds the HDD deck will enter into pause mode Dubbing will resume once recorded portion is detected e Dubbing copyright guarded tape is not possible e When dubbing is in progress only is functional e Tuesday 14 September 2004 me P gt Filename DX7S 11Editing fm DX7S 00 book Page 63 Tuesday September 14 2004 6 11 PM Dubbing From DV To DVD Dubbing An Entire Cassette It is possible to perform automatic dubbing of all the recorded programmes of a cassette from the DV deck to the DVD deck using the ENTIRE dubbing 1 Load the Mini DV cassette you want to dub Make sure its erase protection switch is set to SAVE e Set DV AUDIO to the appropriate mode gt pg 76 2 Press DUBBING to access the Dubbing Menu screen Press AV lt gt to select DV DVD then press ENTER 4 Press lt I gt to select ENTIRE then press ENTER 5 Press AV to select SELECT REC MODE then press ENTER Press AV to select the desired option DV XP SP LP EP or FR then press ENTER 6 Press AV to SELECT SND MODE then press ENTER Press AV to select the desired option SOUND1 or SOUND2 then press ENTER 7 Press V to select CONFIRM then press ENTER The confirmation screen appears 8 Press lt 1 gt
24. Forward Search Button gt HDD amp DVD deck gt pg 26 42 Fast Forward Button gt DV deck gt pg 44 Forward Slow Button SLOW gt pg 27 Play Button gt pg 25 40 Select Button SELECT gt pg 59 Pause Button gt pg 25 40 Stop Button lil r pg 25 40 Clear Button CLEAR gt pg 33 Skip Search Button x gt pg 27 42 0 Set Up Button SET UP gt pg 21 One Touch Replay Button G gt pg 42 D On Screen Button ON SCREEN gt pg 14 30 B Automatic Satellite Programme Recording Button SATO pg 52 D Progressive Scan Button PROGRESSIVE SCAN c pg 45 84 B Angle Button ANGLE DVD deck only gt pg 28 Live Check Button LIVE CHECK pg 42 How To Use Before use insert two R6 size batteries into the remote control with the polarity and matched correctly as indicated on the battery compartment or on the lid The remote control can operate most of your unit s functions as well as basic functions of TV sets and satellite receivers and other brands gt pg 71 e Point the remote control toward the receiving window e The maximum operating distance of the remote control is about 8 m NOTE If the remote control doesn t work properly remove its batteries wait a short time replace the batteries and then try again Tuesday 14 September 2004 B 4 ZB 2 55 ilename DX7S_O5Name fm
25. OR when you add a channel after Auto Set Up Preset Download or Auto Channel Set has taken place Set the Guide Programme number for that station manually e When you wish to timer record a satellite programme with the SHOWVIEW system Set the Guide Programme numbers for all satellite broadcasts received on your satellite receiver e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD Programme Number Set 1 Press SET UP to access the Main Menu screen 2 Press lt gt to select INITIAL SET UP then press V Press lt I gt to select TUNER SET then press V 4 Press AV lt D to select GUIDE s PROG SET then press aS ENTER EE Nma ser up TUNERSET CLOCK SET AUTO CH SET MANUAL CH SET CONTROL SET GUIDE PROG SET i 2 Tum 5 Press AV to select GUIDE PROG then press ENTER 6 Press AV to select the Guide Programme number for the desired station as shown in the TV listings Then press ENTER 7 Press AV to select TV PROG then press ENTER Press AV to select the number of the unit s channel position on which the Guide Programme number s broadcast is received by the unit or the satellite receiver Then press ENTER e Pressing AUX changes TV PROG to SAT e To timer record a satellite programme with the SHowVIEW System you need to install the provided Sa
26. Opening the disc tray Press amp to open the disc tray e Pressing the button again closes the disc tray e Use the button to open and close the disc tray e Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure e Do not place unplayable discs or any object other than a disc on the disc tray e Do not press down strongly on the disc tray or place any heavy objects on it Discs without cartridges Disc tray Place the disc on the disc tray with the label side facing up Since disc size changes depending on the disc to be played back be sure to correctly align the disc with the grooves for its size If the disc is not in its groove it may be scratched or otherwise damaged To insert an 8 cm disc place it according to the inner groove DVD RAM discs contained in cartridges Double sided discs Remove the disc from the cartridge Align the disc with the grooves on the disc tray as shown in the illustration and insert with the side you wish to play back or record facing down If you insert the disc with Side A facing down programmes are recorded on the side A Single sided discs Remove the disc from the cartridge Align the disc with the grooves on the disc tray as shown in the illustration and insert with the label side facing up e 9Tuesday 14 September 2004 18 11 SD Filename DX7S_0
27. Weekly Recording MON SUN MON SAT MON FRI Daily Recording Tuesday s programme Monday s programme senes 14 September 2004 18 11 Now available from some TV stations PDC Programme Delivery Control and VPS Video Programme System are services designed to assure safe accurate timer recording With this System special code signals are transmitted together with the audio video signals These code signals control your video unit and have precedence over the advertised times you may have preset into the timer This means that your unit will start and stop recording when the preset TV programmes actually start and end even if the broadcast time of a preset TV programme is changed NOTES e Make sure to press VPS PDCO after completing timer programming procedure to activate the VPS PDC recording function The VPS PDC recording indicator lights up on the front display panel when VPS PDC recording function is activated However it will blink rapidly when VPS PDC O is pressed under the following conditions e Clock is not set e Timer programming has not been set e Disc is not loaded e HDD is full e When you use Manual Timer Programming set the start time VPS or PDC time exactly as advertised in the TV listing A different time than advertised will result in no recording e VPS PDC recording is also possible when a satellite receiver or a cable system is connected to L 2 IN DECODER connec
28. a m Play List It is a collection of the scenes A play list can be freely edited and played back without ever changing any original recording data Using the random access of a disc which allows video data to be instantly read no matter where it is on the disc a play list includes information such as the timer counter for the playback start point and end point indexes for checking the contents of recorded data category information and more Playback according to a play list you have created allows you to enjoy various combinations of video images from a single title Sm Filename DX7S_10Navigation fm DX7S 00 book Page 57 Tuesday September 14 2004 6 11 PM is Create Play List Masterpage Right NAVIGATION ON HDD DVD DECK Ey 57 Add scenes 1 Press EDIT The Editing screen appears 2 DVD deck only Press AV lt gt to select MODIFY under ORIGINAL PLAY LIST then press ENTER Press AV lt D to select CREATE then press ENTER 4 Press AV lt I gt to select a title that includes scenes to be included in a play list then press ENTER 5 The playback pictures appear in the window on the screen The elapsed playing time starts counting with the arrow on IN OUT 6 Find the point where you want the created play list to begin then press ENTER with the arrow on IN OUT The edit in time is fixed and the elapsed playing time starts countin
29. set to S VIDEO You can obtain a high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal NOTES e f L 1 OUTPUT is set to SCART S VIDEO SCART or COMPONENT it is not possible to set L 1 INPUT to S VIDEO e If L 2 SELECT is set to DECODER it is not possible to set L 1 INPUT to S VIDEO e f L 2 SELECT is set to DECODER it is only possible to set L 1 OUTPUT to SCART VIDEO e Component video signals are not output from the L 1 IN OUT connector e When Progressive scan mode is engaged it is not possible to select the setting of L 1 OUTPUT gt pg 67 L 2 Select Setting Set L 2 SELECT to the appropriate mode depending on the type of appliance connected to the unit s L 2 IN DECODER connector 1 Perform steps 1 and 2 of L 1 Output And L 1 Input Setting on the left column 2 Press AV to select L 2 SELECT then press ENTER Press AV to select the appropriate setting then press ENTER 4 Press SET UP to complete the setting The boldface settings below indicate the settings at your purchase FUNCTION ser ue TITIUS REC PLAY SET UP DISPLAY SET VIDEO IN OUT u SEES EU a W SELECT WITH 42 9 ISET UP TO EXT L 2 SELECT VIDEO S VIDEO SAT VIDEO SAT
30. the remote so that the DV lamp lights up on the unit CABLE SAT TV DVD HDD C O DV 077 DVD PR gt 4 4 gt gt i AUDIO PROGRESSIVE SCAN ATTENTION In the search still slow motion or frame by frame playback mode a slight mosaic effect appears on screen Still Picture Frame By Frame Playback Press I to pause during playback 2 Press M to activate frame by frame playback e resume normal playback press P Slow Motion 1 Press I to pause during playback 2 Press and hold M for 2 seconds then release Press Il and release again to return to still picture e The speed changes for each direction by pressing 44 and gt repeatedly e To resume normal playback press High Speed Search During playback press gt for forward high speed search or 4 4 for reverse high speed search e Each press of the button increases the search speed for each direction e To resume normal playback press Quick Rewind A Little During playback or Live Memory Playback press 7 The unit rewinds the picture a little about 7 seconds and resumes playback e If the button is pressed repeatedly the unit rewinds the pictures continuously and resumes playback Masterpage Right BASIC OPERATIONS ON DV DECK c 45 Next Function Memory e The Next Function Memory tells the un
31. to select EXECUTE then press ENTER for confirmation e Once dubbing starts it will continue dubbing until the end of the tape is reached e To cancel the dubbing press lil then lt gt to select CANCEL and press ENTER to confirm e If the tape is not rewind the unit will start dubbing after automatically rewinding the tape to the beginning 9 Upon completing dubbing the tape stops and DUBBING COMPLETED appears on the TV screen Press ENTER to end e The tape will automatically be rewound NOTES e The programme information at the DV deck will not be dubbed e When there are blanks on the tape of more than 2 seconds the DVD deck will enter into pause mode Dubbing will resume once recorded portion is detected e Dubbing copyright guarded tape is not possible e When dubbing is in progress only is functional gm EDITING 63 About Disc Remaining Display When dubbing from HDD to DVD the unit displays the time information for dubbing by bar meter By comparing the disc remaining time and the necessary time for dubbing of the selected items it is possible to check if the dubbing can be performed completely or not When performing the High Speed Dubbing Capacity of a disc gt gt 5 _____ Remaining capacity 21 Dark green Length of already recorded item Light green Length of selected item Yellow Le
32. 00 2 Press DV HDD DVD SELECT on the unit repeatedly or DV on the remote so that the DV lamp lights up on the unit 3 Find the programme start point If the tape is advanced past the start point press 44 To go forward press BP 4 Press to start playback 5 Press to stop playback e To eject the cassette press DV Clean the video heads using a dry cleaning cassette M DV12CL when e No picture during playback e Block noise appears during playback e USE CLEANING CASSETTE appears on the screen NOTE The heads get dirty in the following cases ein an environment prone to extreme temperature or humidity a dusty environment e flaw dirt or mould on video tapes e continuous usage for a long time Usable cassettes Only cassettes marked TW can be used with the DV deck When you record a tape on the DV deck with the recording speed set to LP it is recommended to play back that tape back on this DV deck Digital video recorder from other manufacturers may not be able to play back the tape properly Ei e 14 September 2004 18 11 Filename DX7S_O8DV Operation fm DX7S 00 book Page 45 Tuesday September 14 2004 6 11 PM Playback Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DV HDD DVD SELECT on the unit repeatedly or DV on
33. 7 Press AV to select CONFIRM then press ENTER The confirmation screen appears 8 Press lt gt to select EXECUTE or AUTO PWR OFF then press ENTER The dubbing screen appears for 5 seconds To display the dubbing screen again press ON SCREEN EXECUTE Select this to continue the dubbing operations AUTO PWR OFF Select this to continue the dubbing operations and turn off the unit after dubbing While the dubbing screen is displayed you can also select this mode by pressing DUBBING CANCEL Select this to cancel dubbing operation NOTES In Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list However the lower transfer rate cannot be dubbed in the higher transfer rate e The recordable time of the disc is displayed on the bar meter For details refer to About Disc Remaining Display gt pg 63 e During dubbing it is not possible to play back on HDD or DVD or to set timer programming Dubbing From HDD To DV It is possible to perform dubbing from the HDD deck to the DV deck 1 Load a Mini DV cassette with the erase protection switch set to REC 2 Press DUBBING to access the Dubbing Menu screen Press AV lt D to select HDD DV then press ENTER 4 Press AV P to select indexes small pictures of desired original recordings an
34. 7 Vp p 75 O Corresponding to Dolby Digital and DTS Digital Surround Bit stream Selectable in digital audio output setting menu VIDEO AUDIO DVD Deck Recording time Maximum 8 hours with 4 7 GB disc XP Approx 1 hour SP Approx 2 hours LP Approx 4 hours EP Approx 6 hours FR Approx 1 hour 8 hours Audio recording system Dolby Digital 2 ch Linear PCM XP mode only Video recording compression system MPEG2 CBR VBR Masterpage RightO SPECIFICATIONS 89 VIDEO AUDIO HDD Deck Video recording compression system MPEG2 VBR Audio recording system Dolby Digital 2 ch Linear PCM XP mode only Recording time Maximum 473 hours with 250 GB HDD XP Approx 57 hours SP Approx 113 hours LP Approx 225 hours EP Approx 338 hours FR Approx 57 473 hours VIDEO AUDIO DV Deck Signal system PAL colour signal 625 lines 50 fields Recording system Digital Component Recording Format DV format SD mode Cassette Mini DV Cassette Maximum recording time SP 80 min with M DV80ME cassette LP 120 min with M DV80ME cassette Audio recording system PCM 48 kHz 16 bit 2 ch 32 kHz 12 bit 4 ch Specifications shown are for SP mode unless otherwise specified TUNER TIMER Tuning system Frequency synthesised tuner Channel coverage VHF 47 MHz 89 MHz 104 MHz 300 MHz 302 MHz 470 MHz UHF 470 MHz 862 MHz Memory ba
35. Clock function gt pg 81 does not work e Power Save does not work when the unit is in the Timer mode the unit s power is turned off after timer recording or Instant Timer Recording the Automatic Satellite Programme Recording mode is engaged gt pg 52 L 2 SELECT is set to DECODER SAT VIDEO or SAT S VIDEO gt pg 67 e It takes some time for the unit to complete initialisation after you turn on the unit power with WAKE UP blinking on the front display panel ON SCREEN LANGUAGE This unit offers you the choice to view on screen messages in 10 different languages Though Auto Set Up selects the language automatically gt pg 20 you can change the language setting manually as required For details refer to On screen Language Set pg 21 e Ei e 14 September 2004 18 11 Filename DX7S_12Subsidiary fm DX7S 00 book Page 78 Tuesday September 14 2004 6 11 PM 78 EN SUBSIDIARY SETTINGS System Setup IMPORTANT Normally Auto Set Up gt pg 18 Preset Download gt pg 19 or Auto Channel Set lt pg 78 sets the Guide Programme numbers automatically You need to set the Guide Programme numbers manually only in the following cases e When timer programming with the SHOWVIEW system the channel position where the station you wish to record is received on your unit is not selected
36. DTS Connecting Using A 2 SUBSIDIARY SETTINGS 75 Mode Set tee DE t E E 75 SHOWVIEW System 00 00 00 78 TUnefi Set ioi eee OE RES d 78 81 Format A Disc DVD Deck Only 82 Finalise A Disc DVD Deck Only 83 Scan Mode M 84 Tray Lock DVD Deck 84 TROUBLESHOOTING 85 SPECIFICATIONS 89 APPENDIX 90 LIST OF TERMS 94 September 14 2004 6 11 k e V Filename DX7S 04Disclnfo fm DX7S 00 book Page 5 Tuesday September 14 2004 6 11 PM About Discs Recordable Playable Discs You can use discs with the following logos for recording and playback RAM RW RAMA 7 DVD RAM DVD RW 12 cm 4 7 GB 9 4 GB 8 cm 1 4 GB 2 8 GB Ver 2 0 2x speed Ver 2 1 1x 2x speed 12 cm 4 7 GB 9 4 GB Ver 1 1 1x 2x speed Video mode VR mode A R4 7 DVD R 12 cm 4 7 GB 8 cm 1 4 GB Ver 2 0 1x 4x speed Video mode e The above table is based on the information as of February 2004 e Recording and playback may not be performed depending on the characteristics and condition of the disc used leading to unsatisfactory results Using discs manufactured by JVC is recommended since they have been tested to be compatible with this unit DVD
37. DVD DVD Audio RAM VIDEO cD You can programme up to 30 tracks Video CD SVCD or Audio CD to play back in the desired order While stopped 1 Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select then press ENTER The programme table appears under on screen bar TRACK 99 EACH 0 00 CINEMA WP coss Om prom mo 3 3 Press the number keys to USE 0 9 KEYS TO SELECT TRACK enter the track numbers in the ULP Xe Ape viii are s poi desired order By Es E ESTE Examples 11 12 42 274 10 17 18 1970 1 To select track 5 press the 5 a 22 026 EO oa number key 5 and ENTER Fax zl E E PER RH 2 To select track 15 press the number key 1 and 5 Program Total Time 0 00 14 September 2004 18 11 3 To select track 25 press the number key 2 and 5 If you have specified a wrong selection Press CANCEL X The last selection is erased Or press CLEAR W The whole selection is erased Masterpage Right BASIC OPERATIONS ON DVD DECK ey 33 4 Press gt Playback starts in the programmed order e When all of the programmed tracks have been played back Programme Playback stops but the programmed information remains e To add tracks to the end of the programme perform steps 1 through 3 e During Programme Playback pressing gt l skips to the next selection of the progra
38. IN DECODER gt pg 23 66 73 74 Antenna Output Connector ANTENNA OUT gt pg 17 Tuesday 14 September 2004 me e Filename DX7S 05Name fm DX7S 00 book Page 12 Tuesday September 14 2004 6 11 PM 12 en INDEX Front Display Panel Video Indicator G gt gt pg 36 39 46 Lights when VIDEO mode is selected by pressing TV VIDEO Lights off when TV mode is selected Disc Type Indicator When a disc is loaded the type of the disc is indicated Disc Status Indicator When a disc is running the disc marks rotate During High Speed Search Rotate faster than normal playback Rotate slower than normal playback Inner red ring lights in the same way as normal playback During Instant Timer Recording ITR inner red ring slowly blinks Disc marks blink when either recording or playing back Disc marks all light Disc marks all blink During Slow Motion While recording While paused While stopped While resume stopped While the disc tray opened Disc marks all light out No disc on the disc tray Disc marks all light out VR Mode Indicator VR c pg 82 Lights when a DVD RW disc is formatted in VR mode VPS PDC Indicator gt pg 49 Appears when checking if the station being received transmits a VPS PDC signal Linear PCM Indicator LPCM Lights when MODE REC AUDIO is set to LINEAR PCM gt pg 76 for recording with H
39. MS Montserrat SA Saudi Arabia UY Uruguay MT Malta SB Solomon Islands UZ Uzbekistan MU Mauritius SC Seychelles VA Vatican City State Holy See MV Maldives SD Sudan VC Saint Vincent and the Grenadines MW Malawi SE Sweden VE Venezuela MX Mexico SG Singapore VG Virgin Islands British MY Malaysia SH Saint Helena VI Virgin Islands U S MZ Mozambique SI Slovenia VN Viet Nam NA Namibia SJ Svalbard and Jan Mayen VU Vanuatu NC New Caledonia SK Slovakia WF Wallis and Futuna Islands NE Niger SL Sierra Leone WS Samoa NF Norfolk Island SM San Marino YE Yemen NG Nigeria SN Senegal YT Mayotte NI Nicaragua SO Somalia YU Yugoslavia NL Netherlands SR Suriname ZA South Africa NO Norway ST Sao Tome and Principe ZM Zambia NP Nepal SV El Salvador ZR Zaire NR Nauru SY Syrian Arab Republic ZW Zimbabwe e 92Tuesday 14 September 2004 18 11 Kil an Filename DX7S 12Subsidiary fm ails DX7S 00 book Page 93 Tuesday September 14 2004 6 11 PM Masterpage Right 3Column APPENDIX cu 93 TV Station And ID List The ID abbreviation is what is shown on screen in lieu of the station name The ID abbreviation is listed in the Confirmation screen and is displayed on the TV screen when the unit is tuned to a different station ID STATION NAME ID STATION NAME ID STATION NAME 1000 TV1000 JIM JIM TV SHOW SHOW 3SAT 3SAT JSTV JSTV SIC SOCIEDADE OLIV OLIVE KA2 KA2 SKY SKY CHANNEL AB3 AB3 KAB1 K
40. Manual Timer Programming gt pg 50 To skip the weekly daily programmes to the next week day It is easy to temporarily cancel weekly daily programmes of week day Press AV lt gt to select PROGRAMME SKIP then press ENTER 2 Press lt gt to select SKIP then press ENTER To save the titles of weekly daily programmes HDD Deck Only Use this function to avoid overwriting titles of weekly daily programmes of a previous week day 1 Press AV lt gt to select TITLE SAVE then press ENTER 2 Press lt I gt to select SAVE then press ENTER NOTE This function is available only when the remaining capacity of the hard disc is sufficient Masterpage Right TIMER RECORDING ON HDD DVD DECK c 51 When Programmes Overlap Each Other If PROGRAMME OVERLAPPED appears you have other programmes overlapping the programme you have just made Confirm with the arrow on MODIFY then press ENTER Programme Overlap list appears Example Five programmes overlap each other 1 Confirm the overlapping E PROGRAMME gt CALENDAR PR OVERLAP 010803 WED 2230 2400 BBCI 100 GARDENING EDUCATION F360 5 PROGRAMMES OVERLAPPED a DELETE OR MODIFY PROGRAMMES SELECT WITH lt gt dese programmes Overlapping M programmes appear on the IE Rr TV screen 0 o n NOTE If you do not mind this overlap press PROGRAMME to finish the timer programme setting The
41. Record From The Previous Part Of The Channel Currently Watching Live Memory Recording You can start recording from the previous part of the channel you are currently watching temporarily recorded on the background gt pg 41 Temporary recording for Live Memory Press lt lt or 4 9 to locate the point to start recording from e Each press of lt 44 increases the reverse search speed 2 Press on the unit to start Live Memory Recording Or while holding 6 press on the remote control Press to stop Live Memory Recording e The on air screen resumes NOTES e You cannot use Live Memory Recording for channels other than the channel you are currently watching e Recording speed is automatically set to SP mode when Live Memory Recording is started e Temporarily recorded data prior to the beginning of Live Memory Recording is erased when Live Memory Recording started To Move Back The Playback Position Slightly While Recording One Touch Replay Function You can move back the playback position while continuing to record or timer record Press e Each press skips back for approximately 7 seconds and resumes playback e Pressing while paused skips back for approximately 7 seconds and resumes pause To Resume Playback Of A TV Broadcast From The Paused Point You can resume playback of a TV broadcast you were recording or watching from the point you have paused 1 Press II to pause a TV broadc
42. This prevents the temperature from rising inside the unit Do not remove it e Install the unit so as not to block the area around the fan e The cooling fan on the rear of the unit may be activated even if the unit is turned off in the following cases In the Automatic Satellite Programme Recording standby mode gt pg 52 slightly before the starting time of VPS PDC recording gt pg 49 f you connect the decoder or satellite receiver to L 2 IN DECODER and if L 2 SELECT is set to DECODER or SAT VIDEO or SAT S VIDEO gt pg 67 when JUST CLOCK is set to gt pg 81 Set JUST CLOCK to OFF if you mind the noise of the fan Digital Audio Output Connectors DIGITAL AUDIO OUT OPTICAL COAXIAL HDD amp DVD deck only pg 68 74 S S video Output Connector S VIDEO OUT gt pg 17 Q Audio Output Connectors AUDIO OUT LEFT RIGHT t pg 68 74 Component Video Output Connectors COMPONENT VIDEO OUT Y Ps PrR HDD amp DVD deck only gt pg 17 e This component video output enables you to watch the images on the DV deck in Progressive scan mode refer to DV Progressive Scan gt pg 45 Q Antenna Input Connector ANTENNA IN gt pg 17 Satellite Control Connector SAT CONTROL HDD amp DVD deck only gt pg 66 D L 1 Input Output Connector L 1 IN OUT gt pg 17 66 73 74 L 2 Input Decoder Connector L 2
43. blank portion of the tape Tuesday 14 September 2004 me e Filename DX7S 11Editing fm e DX7S 00 book Page 70 Tuesday September 14 2004 6 11 PM 70 en EDITING Insert Editing DV Deck Only e Slide the TV CABLE SAT DVD switch to DVD Insert Editing replaces the pictures with new ones while the audio soundtrack remains unchanged For Insert Editing use your unit as the recording deck ATTENTION Insert Editing is not possible with a Mini DV cassette recorded in LP mode T connections 1 If the player has no S VIDEO output connector connect the player s AUDIO VIDEO OUT connectors to your unit s VIDEO AUDIO MONO L R input connectors the front panel If the player has no S VIDEO output connector Your unit Recorder To VIDEO AUDIO input NSERT Audio video cable not supplied AUDIO VIDEO OUT Another recorder Player If the player has an S VIDEO output connector Your unit Recorder To AUDIO input input _ To S VIDEO S video cable Audio cable not supplied not supplied S VIDEO AUDIO OUT E v Another recorder Player lan
44. broadcasting scrambled programmes then press ENTER The Confirmation screen appears 4 Press AV to select DECODER then press ENTER 5 Press AV to set DECODER to then press ENTER 6 Press RETURN to return to the Manual Channel Set screen e Repeat steps 3 5 as necessary 7 Press SET UP to close the Confirmation screen INFORMATION If you live in Eastern Europe SYSTEM setting appears instead of DECODER setting on the Manual Channel Set Screen When you can see the picture but can hear no audio select appropriate TV system D K or B G Normally TV programmes are broadcast as follows For Eastern Europe D K For Western Europe B G 1 Select a country in Eastern Europe in step 5 of Auto Channel Set r pg 78 2 Press AV to select TV SYSTEM in step 7 of Manual Channel Set gt pg 79 3 Press AV to select appropriate TV System D K or B G 14 September 2004 18 11 Set station names that are registered in your unit 1 Perform steps 1 5 of Manual Channel Set pg 79 2 Press AV lt D to select the channel you want to modify then press ENTER The Confirmation screen appears Press AV to select ID then press ENTER 4 Move the arrow to the left ID selection column Registered station names ID pg 93 appear as you press AV 5 Press ENTER to select the desired ID then press ENTER again to se
45. by simply selecting your country the Auto Set Up function sets the tuner channels clock and Guide Programme numbers automatically If you live in Belgium BELGIUM or Switzerland SUISSE you also need to select your language y If you live in Hungary MAGYARORSZAG Czech Republic CESKA REPUBLIKA Poland POLSKA or other countries in Eastern Europe OTHER EASTERN set the clock manually CABLE SAT TV DVD DVD ENTER Before starting make sure of the following e The TV aerial cable should be connected to the unit e The unit s mains power cord should be connected to a mains outlet e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD 1 Press 0 on the unit or DVD 1 on the remote control to turn on the unit The Country Set display appears on the TV screen 2 Press AV lt I gt to select your country s name then press ENTER The Language Set display appears on the TV screen NOTES e If you have selected BELGIUM or SUISSE go to step 3 If you have selected MAGYARORSZ G CESK REPUBLIKA POLSKA or OTHER EASTERN press ENTER The Clock Set screen appears Set the clock manually gt pg 81 then go to step 4 e f you have selected any other country name go to step 4 ef INITIAL S
46. changed correctly Press lt to select NO then press ENTER Then perform the procedure again from step 7 BRAND NAME CODE JVC 73 AMSTRAD 60 61 62 63 92 ASTON 97 CANAL SATELLITE 81 CANAL 81 D BOX 85 ECHOSTAR VIA DIGITAL 82 FINLUX 68 FORCE 89 GALAXIS 88 GRUNDIG 64 65 102 HIRSCHMANN 64 78 99 HUMAX 88 ITT NOKIA 68 JERROLD 75 KATHREIN 70 71 96 LUXOR 68 MASCOM 93 MASPRO 70 NOKIA 87 94 PACE 65 67 74 86 92 97 PANASONIC 74 92 PHILIPS 66 84 101 RADIX 78 RFT 69 SABA 97 SAGEM 83 90 SALORA 68 SAMSUNG 83 SIEMENS 64 SKYMASTER 69 98 TECHNISAT 66 100 THOMSON 97 TPS 83 TRIAX 91 WISI 64 NOTES e The Satellite Controller may not work with all types of satellite receiver e For some satellite receivers you need to set its channel input mode to 2 digit e If your satellite receiver has more than two channel modes be sure to set to All Channel Mode For details refer to the instruction manual of the satellite receiver e When selecting the satellite receivers channel gt step 10 signals from the remote control may interfere with signals transmitted from the Satellite Controller In this case move the remote control as close to the unit s infrared beam receiving window as possible lan TS e Tuesday 14 September 2004 me JP Filename DX7S_O6DVD Operation fm DX7S 00 book Page 25 Tuesday September 14 2004 6 11 PM
47. component video connection you can view the images in the progressive mode For switching to the progressive mode refer to Scan Mode Set gt pg 84 e You can also watch the images on the DV deck in Progressive scan mode via the component video output refer to DV Progressive Scan pg 45 NOTE Select an appropriate option of L 1 OUTPUT as follows gt pg 67 When your TV s SCART Set L 1 OUTPUT to connector accepts Composite signals SCART VIDEO Y C signal separated luminance brightness and SCART S VIDEO chrominance colour signals RGB signal SCART Component video signal COMPONENT 4 Plug the end of the mains power cord into a mains outlet e LOADING blinks on the front display panel when the AC plug of the mains power cord is connected into a mains outlet and it takes approximately 50 seconds for the unit to be turned on This is not a malfunction Tuesday 14 September 2004 me e D n Filename DX7S 05Name fm DX7S 00 book Page 18 Tuesday September 14 2004 6 11 PM 18 en INITIAL SETTINGS Auto Set Up Auto Channel Set Auto Clock Set Auto Guide Programme Number Set After the button on the unit or DVD on the remote control is pressed for the first time to turn on the unit
48. connecting a satellite receiver or a decoder to the L 2 IN DECODER connector leave L 2 SELECT set to VIDEO e When L 2 SELECT is set to SAT VIDEO and SAT S VIDEO SAT appears on the TV screen or front display panel instead of L 2 e If L 1 OUTPUT is set to SCART S VIDEO it is not possible to set L 2 SELECT to DECODER or SAT VIDEO e If L 1 OUTPUT is set to SCART it is not possible to set L 2 SELECT to DECODER or SAT S VIDEO e If L 1 OUTPUT is set to COMPONENT and L 2 SELECT to SAT VIDEO SAT S VIDEO or DECODER be sure to connect the L 1 IN OUT connector with a TV F 1 Input Setting Set F 1 INPUT to the appropriate mode depending on the connector VIDEO or S VIDEO being used on the front panel 1 Perform steps 1 and 2 of L 1 Output And L 1 Input Setting t pg 67 2 Press AV to select F 1 INPUT then press ENTER 3 Press AV to select the PAPE FUNCTION SET UP appropriate setting then press REGPLAY SETUP DISPLAY SET VIDEO NOUT ENTER 4 Press SET UP to complete the setting The boldface settings below indicate the settings at your purchase L 4 INPUT vf cs L 1 OUTPUT SCART VIDEO L 2 SELECT VIDEO ETE SCIAS Mass ENTER 9 PRESS SET UP TO DXN F 1 INPUT VIDEO S VIDEO VIDEO When connecti
49. connecting the unit to a device equipped with a DV input connector be sure to use the optional DV cable VC VDV204U e To edit through the DV IN OUT connector using the HDD or DVD deck refer to DV Dubbing HDD amp DVD Deck Only gt pg 64 Tuesday 14 September 2004 me e qm Filename DX7S_11Editing fm 1 DX7S 00 book Page 66 Tuesday September 14 2004 6 11 PM 66 EN EDITING Edit To Or From Another Recorder You can use your unit as the source player or as the recording deck NOTE When using another recorder as the recording deck refer to its instruction manual 1 When using your unit as the source player TV receiver Player Your unit om mE o sso ole 9 95 21 SCART cable supplied 21 pin SCART cable not supplied Another recorder Recorder When using your unit the recording deck TV receiver Recorder Your unit oM EX rese 95195 1 21 pin SCART cable supplied Another recorder Player 21 pin SCART cable not supplied es e Slide the TV CABLE SAT DVD switch to DVD 1 Connect another recorder s 21 pin SCART connector to the unit s 21 pin SCART connector as illustrated 1 When using your u
50. e All necessary power switches have not been turned on Confirm that all units power switches are turned on e The setting of the input channel position is inappropriate Select the input channel position F 1 L 1 or L 2 that corresponds to the input terminal connected to the external equipment lt pg 66 The on screen display superimposed on the programme played back received on this unit is recorded when you dub the programme to external recording equipment Set SUPERIMPOSE to OFF gt pg 77 The unit does not operate e There are cases when the operation is prohibited on the disc e Lightning or static electricity may cause malfunction of the unit Press 0 1 to turn the power off then press the button again to turn the power on The remote control of a JVC TV will not operate the unit e The setting of the remote control code is inappropriate To operate the unit using a JVC TV remote control set the remote control code of the unit to 1 Default gt pg 71 om 85Tuesday 14 September 2004 18 11 e TROUBLESHOOTING Ey 85 Masterpage RightO Playback DVD Deck The DVD deck cannot be operated e The DVD deck is not selected Press DV HDD DVD SELECT on the unit repeatedly or DVD on the remote so that the DVD lamp lights up on the unit Images do not appear on the TV screen e The TV receiver s chan
51. has come In such a case the timer programmed recording starts if the end time of the timer programmed recording is set after the end of Instant Timer Recording after the Instant Timer Recording finishes Time Code During recording a time code is recorded on the tape This time code is used to confirm the position on the tape when playing back or editing a tape 1 Press DISPLAY until the time code on the tape appears on the front display panel e By pressing the DISPLAY button you can change the display to show the time code channel position clock time Channel position is not displayed during playback NOTES The presence of a blank unrecorded portion in the middle of a tape can result in misoperation A blank portion of a tape is a section where nothing is recorded on the tape If you start recording in a blank portion of a tape the time codes will start from 0 00 00 again If identical time codes are recorded in two different places on a tape Random Assemble Editing and other similar functions might not operate properly In the following cases you should play back the tape and confirm where a scene ends and then begin recording from there e When starting recording in the middle of a tape on which a recording has already been made e When you finish recording on a tape then played back that recording in order to check it and now wish to continue recording e When you lost power or the batteries died
52. lt 1 to select INITIAL SET UP then press V 5 Press lt D to select TUNER SET then press V 6 Press AV lt D to select SAT CONTROL SET then press ENTER ga 7 Press AV to select BRAND ES then press ENTER ep Se oye 8 Press AV to select the brand code from the list on page 24 then press ENTER e If the unit is in playback or recording mode you cannot set the brand code 9 Press AV to select PROGRAMME then press ENTER Press v to select one of the channel positions on the satellite receiver then press ENTER e You can select the channel position between 1 to 999 Press Av to select TEST then press ENTER The unit enters the Test mode DVD VIDEO SET UP HOI TUNER AUTO CH SET MANUAL CH SET 4 zi kJ GN d s INITIAL SET UP gt SAT CONTROL SET Dm m PROGRAMME TEST Ls pa Om SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT 7 sevect Tuesday 14 September 2004 me ilename DX7S_O5Name fm 5 DX7S 00 book Page 24 Tuesday September 14 2004 6 11 PM 24 en SAT CONTROL SET 12 Check the result of the test If the satellite receiver s channel number has been changed to the same one as you set in step 10 Press lt gt to select YES then press ENTER to finish the Sat Control Set mode If the satellite receiver s channel number has not been
53. press ENTER To change the country code Press AV to select COUNTRY CODE then press ENTER 5 Press AV to select your country code then press ENTER e See Country Area Code List for Parental Lock 7 pg 91 6 Press the number keys to enter the same password as in step 6 of To Set Parental Lock For The First Time then press ENTER 7 Press SET UP to complete the setting NOTE If you forget your password enter 8888 in step 6 To Temporarily Release Parental Lock When you set the Parental Lock level strictly some discs may not be played back at all When you insert such a disc and try to play it back the confirmation screen appears on the TV screen asking you whether you want Parental Lock to be temporarily released or not Load a disc e If the disc is rated higher than the selected level the confirmation screen appears 2 Press lt D to select YES then press ENTER e If you select NO you cannot play back that disc 3 Press the number keys to enter the same password as in step 6 of To Set Parental Lock For The First Time then press ENTER e When you enter the correct password the Parental Lock is released and the unit starts playback e If you enter a wrong password ENTRY ERROR appears on the TV screen Enter the correct password e If you have successively entered wrong password three times ENTRY ERROR CAN NOT CHANGE PASSWORD appears on the TV screen In s
54. programme with the lower programme number will be recorded and the other one will not be recorded correctly If no changes are made for approximately 1 minute the unit will return to the normal screen 2 Press AV to select the desired programme to be cancelled or changed then press ENTER 3 Perform Cancel And Change Programmes refer to left column NOTE When any overlaps remain after deletion and modification of programmes Programme Overlap list remains showing the conflicting programmes In such a case repeat the procedure above until the conflict is solved ml 7 Filename DX7S 09Timer Recording fm DX7S 00 book Page 52 Tuesday September 14 2004 6 11 PM 52 en TIMER RECORDING ON HDD DVD DECK Automatic Satellite Programme Recording HDD Deck Only This function allows you to automatically record a satellite programme which is timer programmed on your external satellite receiver Connect a satellite receiver to the unit s L 2 IN DECODER connector and programme the timer on the satellite receiver The unit starts or stops recording by the signals input from the satellite receiver After recording the unit s power shuts off automatically ATTENTION e Be sure not to turn on the satellite receiver before the programme is executed otherwise the unit will start recording when the satellite receiver s power is turned on e If you have connected another appliance other than a
55. recording mode depending on the combination of the total time of the programme to be recorded and either the remaining disc space or the specified recording time from 60 minutes to 480 minutes W To record the entire programme within the actual remaining disc space DVD deck only Select FR JUST in a recording mode selection procedure e Note that this function is available only for timer programming recording gt pg 48 50 and dubbing from HDD to DVD gt pg 60 W To record the entire programme by specifying the desired recording time Select FR60 FR360 FR420 or FR480 in a recording mode selection procedure gt pg 35 38 48 50 W To record a 25 min long daily programme five times just on the same DVD disc for example Perform SHOWVIEW Timer Programming pg 48 procedure Be sure to set the recording mode to FR125 and set Weekly Daily Rec Function to MON FRI in step 8 to fit the total recording time to the whole disc space A 1st B 2nd C D 4th E E 5th When the same programme is recorded in SP mode instead of in FR125 the 5th programme cannot be recorded A 1st B 2nd C 3rd D 4th E Blank 20 min Blank NOTES e You can programme this unit to timer record regardless of the disc remaining time When the disc remaining time is not enough the unit performs Relief Recording gt pg 50 To avoid this ma
56. repeatedly VIDEO MODE To be chosen when you want to erase all the data on the disc once played back to record new data or play back the disc on other DVD players Press lt D to select then press ENTER NOTES e It is impossible to format Version 1 0 DVD RW discs in Video mode e It is impossible to format DVD R discs e All the titles on a disc will be deleted once the disc is formatted even if they are protected titles gt pg 55 Ei 14 September 2004 18 11 Filename DX7S 12Subsidiary fm DX7S 00 book Page 83 Tuesday September 14 2004 6 11 PM Finalise A Disc DVD Deck Only DVD DVD Audio L5 Finalising DVD R RW discs recorded on this unit makes it possible for the discs to be played back on other DVD players DVD RW discs are finalised in the mode that the discs were formatted enabling playback on compatible DVD players Title names input in the Library Database Navigation are registered as title names in the DVD menu gt pg 54 e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Load a DVD R RW disc to finalise CABLE SAT Teo ENTER SET UP Before finalising e It is possible to record on a blank space e It is possible to enter title names gt pg 54 e
57. repeatedly or HDD on the remote so that the HDD lamp lights up on the unit o Filename DX7S 12Subsidiary fm 4 DX7S 00 book Page 86 Tuesday September 14 2004 6 11 PM Masterpage Left 86 En TROUBLESHOOTING Playback DV Deck Recording HDD Deck The DV deck cannot be operated broadcasts cannot recorded e The DV deck is not selected e L 1 L 2 or F 1 has been selected as the input mode Press DV HDD DVD SELECT on the unit repeatedly or DV on Set to the desired channel the remote so that the DV lamp lights up on the unit Camcorder recording is not possible The tape will not rewind or fast forward e The camcorder has not been properly connected e The tape is already fully rewound or fast forwarded Confirm that the camcorder is properly connected Check the cassette e The input mode is not correct Set the input mode to F 1 lt pg 65 The playback picture does not appear while the tape is running Recording DV Deck e The TV is not set to the AV mode Set the TV to the AV mode During recording the tape does not run The DV recording Noise appears during visual search TE e The unit is in the Record Pause mode e This is normal Press gt to resume recording lamp lights up on the unit Recording cannot be done The playback picture is blurred or interrupted while TV broadcasts are cl
58. sound bit rate of the connected DV equipment Connected DV equipment information Maker name and model name etc may not appear depending on the connected equipment Time counter for the connected DV equipment 14 Sound monitor mode C m e 0 05 f T 15 Remote control switch Auto capture button 17 Sound monitor switch 179 59 59 18 Elapsed recording time When SCREEN on the remote control is pressed various operational indicators appear on the TV screen To clear the operational indicators press ON SCREEN again m 0 Ten e or 1 spl 91 00 1eBIT oI 12 04 S DV os 0 00 00 0 Q Operation Mode Indicators Tape Speed SP LP Sound Mode Display gt pg 76 Time Code Display gt pg 47 Audio Mode Display gt pg 45 Type of Broadcast gt pg 47 DV Indicator Current Day Month Year Clock Display Channel Position Number and Station Name Auxiliary Input Indicator L 1 L 2 F 1 or SAT When L 2 SELECT is set to SAT t pg 67 SAT appears instead of L 2 D Cassette Loaded Mark Tuesday 14 September 2004 me D on Filename DX7S 05Name fm DX7S 00 book Page 17 Tuesday September 14 2004 6 11 PM Basic Connections b TV aerial cable Mains outlet To ANTENNA I
59. that appears on the TV screen will be recorded gt pg 76 Press M to pause recording e You can select channel during the Record Pause mode e To resume recording press P 7 Press to stop recording e The DV recording lamp lights off on the unit 14 September 2004 18 11 Masterpage Left Recording Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DV HDD DVD SELECT on the unit repeatedly or DV on the remote so that the DV lamp lights up on the unit DV HDD DVD SELECT TV DVD CABLE SAT TV AV VIDEO Dv PR DISPLAY AUDIO Watch Another Programme While Recording On The Unit While recording is going on you can watch another programme on the TV by using the TV s tuner NOTE It is required that the remote control is set to be able to operate the TV in advance gt pg 71 1 During recording press TV AV VIDEO to select TV mode e Video mode is disengaged and the VIDEO indicator on the front display panel lights off VIDEO indicator lights off e The programme received on the TV s tuner is displayed on the TV screen 2 Slide the TV CABLE SAT DVD switch to TV Press PR repeatedly to select the desire
60. the programme is recorded to the DVD deck until the remaining capacity of the DVD disc lasts e If JUST is selected for the recording mode the current recording mode for the DVD deck is applied J d 14 September 2004 18 11 Filename DX7S 09 Recording fm DX7S 00 book Page 51 Tuesday September 14 2004 6 11 PM CABLE SAT PROGRAMME To check the whole list of programmes 1 Press PROGRAMME to access the programme top screen 2 Press AV lt gt to select PROGRAMME LIST then press ENTER e The details of a selected programme appear on the top of the Screen e The daily programme of a title is listed as one programme To check the list of programmes by date 1 Press PROGRAMME to access the programme top screen 2 Press AV lt gt to select CALENDAR LIST then press ENTER Press AV to select the desired date then press ENTER Cancel And Change Programmes Repeat steps in Check Programmes to select a programme before proceeding To cancel the programme 1 Press AV lt P to select CANCEL then press ENTER To modify the programme settings 1 Press AV lt gt to select MODIFY then press ENTER 2 Change the settings of the desired recording options as required e Refer to steps 4 12 in
61. trademarks of Dolby Laboratories e DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc e Cassettes marked Mini DV can be used with the DV deck of this unit The DV deck can play back and record only PAL signals e SHOWVIEW is a registered trademark of Gemstar Development Corporation The SHOWVIEW system is manufactured under license from Gemstar Development Corporation e This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing users only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited e 2Tuesday 14 September 2004 18 11 e e m 3Tuesday 14 September 2004 18 11 Filename DX7S_02Safety fm DX7S 00 book Page3 Tuesday September 14 2004 6 11 PM For Italy It is declared that this product brand JVC conforms to the Ministry Decree 548 of 28 9 95 published in the Official Gazette of the Italian Republic n 301 of 28 Dec 95 The STANDBY ON button does not completely shut off mains power from the unit but switches operating current on and off shows electrical power standby and 1 show
62. video connection Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator 2 lights up on the front display panel Timer programming recording does not start e Date and time is not correct gt Set date and time correctly gt pg 81 Whistling or howling is heard from the TV during camcorder SHOWVIEW Timer Programming cannot be made recording D dti h 3m e The camcorders microphone is too close to the TV Dale aed not correct Position the camcorder so its microphone is away from the TV Set date and time correctly gt pg 81 5 e TV s volume is too high e The channel position does not correspond to that in the Turn the TV s volume oun receiving area t th t ch for th iving broadcast 2 oo ee When scanning channels some of them are skipped over e Those channels have been designated to be skipped The SHOWVIEW system does not timer record properly If you need the skipped channels restore them c pg 79 e The unit s channel positions have been set incorrectly Refer to SHOWVIEW System Setup gt pg 78 and reperform The channel cannot be changed the procedure e Recording or Live Memory recording is in progress Automatic Satellite Programme Recording does not start pause recording change th ichannel then pressa to resume recording e The satellite rece
63. while you were recording with a camcorder Your unit is equipped with a Sound Multiplex decoder 2 and a Digital stereo sound decoder NICAM making reception of stereo and bilingual broadcasts possible When the channel is changed the type of broadcast being received will be displayed on the TV screen for a few seconds Type of Broadcast Being Received On screen Display A2 Stereo ST A2 Bilingual BIL Regular Monaural none NICAM Stereo ST NICAM NICAM Bilingual BIL NICAM NICAM Monaural NICAM e To listen to a stereo programme press AUDIO until L gt R appears on the TV screen e To listen to a bilingual programme press AUDIO until L gt or 0 R appears on the TV screen e To listen to the standard Regular Monaural audio while receiving a NICAM BIL broadcast set AUDIO REC to pg 76 To Record Stereo and Bilingual Programmes A2 Stereo programmes are automatically recorded in stereo on the Hi Fi audio track e Bilingual programmes are automatically recorded in bilingual on the audio track To Record NICAM Bilingual Programmes See AUDIO c pg 76 NOTES e If the quality of stereo sound being received is poor the broadcast will be received in monaural with better quality e Before playing back a bilingual programme refer to Soundtrack Selection gt pg 45 Accidental erasure prevention To prevent acc
64. will start again e f no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up the TV system setting for those channels may be incorrect Select the appropriate TV system for those channels gt pg 80 INFORMATION Masterpage Right SUBSIDIARY SETTINGS 79 Manual Channel Set e Store channels that were not stored during Auto Set Up pg 18 Preset Download gt pg 19 or Auto Channel Set pg 78 1 Press SET UP to access the Main Menu screen 2 Press lt D to select INITIAL SET UP then press V Press lt gt to select TUNER SET then press V 4 Press AV lt I gt to select MANUAL CH SET then press ENTER The Manual Channel Set screen appears 5 Press lt D to select EDIT then press ENTER 6 Press AV lt I gt to select a blank position in which you Example To store in position 12 SG INITIAL SET UP gt MANUAL CH SET want to store a channel then UE EE 2 1 press ENTER The Confirmation screen appears 7 Press AV to select BAND then press ENTER BM MEINEN Lo NENNEN MOVE EDIT RETURN The programme currently received on the selected channel position appears behind the confirmation screen 8 Press v to change the band between CH regular and CC cable then press ENTER 9 Pres
65. 03 THU 10 00 10 15 FROG WORLD 1143 MIN PR 3 1 HOBBY SELECT WITH e THEN PRESS ENTER 1 Playback screen Indicates currently received TV programme 2 Guidance for operations 3 Scroll bar Appears when there are over nine registered titles or play lists The scroll bar only indicates that there are more titles or play lists hidden off the current screen display To show hidden titles or play lists press AV lt 2 repeatedly 4 Recording information for the title indicated by the arrow 5 Index list Thumbnail still of each title Thumbnail still is not to be played back 6 Index amp Indicates no index is registered Indicates title in standby for timer recording 1 1 no title is registered 1 Icons Indicate the record condition of each title The Icons and their meanings This title is write protected This title has stereo sounds e This title was recorded with timer recording This title is Weekly Recording Weekly Overwrite This title is Daily Recording Daily Overwrite This title is Daily Recording Weekly Overwrite This title has not been played back This title is copy protected BEIG This title can only be recorded once copy once title 14 September 2004 18 11 Masterpage RightO NAVIGATION ON HDD DVD DEC
66. 04 18 11 Filename DX7S_04Disclnfo fm DX7S 00 book Page 8 Tuesday September 14 2004 6 11 PM 8 en DISC INFORMATION DVD VIDEO Marks Masterpage Left Placing A Disc e Sometimes marks are printed on a DVD disc and or on its packaging to indicate information regarding the contents and functions of the disc Check the marks indicating the contents and functions of the disc Note however that in some cases a disc may not include a mark even for a function it supports Marks related to video Number of subtitles Number of angles Recorded under the Screen includes black standard 4 3 aspect bands at the top and ratio the bottom of image which has a standard 4 3 aspect ratio letter box Video playback is in Wide video mode 16 9 on 16 9 LB wide televisions but in letter box on televisions with standard 4 3 aspect ratio Video playback is in Wide video mode 16 9 on wide televisions but pan and scan is used on televisions with standard 4 3 aspect ratio either the left or right side of the image is cut out Marks related to audio Number of audio tracks 3 Dolby Digital mark D It has been developed by Dolby Laboratories as a digital surround system piGiTAL DTS Digital Theater Systems You can enjoy DTS audio if you connect an amplifier with built in DTS decoder to the SURROUND DIGITAL OUT connector of the unit
67. 26 Disc Remaining Time 011111 36 39 Disc Resurne erint ete 76 Discs For Playback Only 6 DV Progressive Scan 45 ei 26 Elapsed Recording Time Indication 36 39 46 F File Structure Of Discs 2 20 1 7 Free Rate Function sssssseeeeeenneneee 37 G Guide Programme Number 78 H High Speed Search 26 40 45 l Instant Timer Recording ITR 36 39 47 Interlaced SCAN 2 84 J JUMP Search EE 43 JUST TIE 81 L Language Code 90 Letter BOX ce 22 kive Memoty eed exero ERE Tae eed 41 Live Memory Recording 43 Manual Channel Set 79 Marking Positions To Play Back Again Later 27 Menu Audio Subtitle Language Set 21 N Next Function Memory 45 NNUS One Touch Replay 29 43 On screen nennen 30 On screen Language Set 21 P Pang SCAN
68. 4Disclnfo fm e DX7S 00 book Page 9 Tuesday September 14 2004 6 11 PM Care And Handling Of Discs How to handle discs When handling a disc do not touch the surface of the disc Since discs are made of plastic they are easily damaged If a disc gets dirty dusty scratched or warped the images and sound will not be picked up correctly and such a disc may cause the unit to malfunction Label side Do not damage the label side stick paper to or use any adhesives on its surface Recording side Make sure that discs are not scratched and dirty on the recording side before use Scratches and dirt on the recording side of a disc may hinder proper playback and recording Also be careful that a DVD RAM disc may get scratched or dirt when removed from cartridge then put back in after use Storage Make sure that discs are kept in their cases If discs are piled on top of one another without their protective cases they can be damaged Do not put discs in a location where they may be exposed to direct sunlight or in a place where the humidity or temperature is high Avoid leaving discs in your car Maintenance of discs If there are fingerprints or other dirt adhering Z to a disc wipe with a soft dry cloth moving SOK from the centre outwards If a disc is difficult to clean wipe with a cloth moistened with water Never use record cleaners petrol alcohol or any anti static agents CAUTION Sometimes during play
69. A 01 OP 06 10 9 30 PR12 lt HDD PREV 16 11 2002 07 10 2002 WORI 86 RALLY CAR OP 10 04 0 30 PR16 87 RALLY CAR ED 10 04 0 30 816 88 Chobits 04 OP 02 05 PR10 89 Chobits 404 ED 02 05 10 90 Chobits 25 ED 26 09 0 00 PR10 MN32 LPCM T e e 6Tuesday 14 September 2004 18 11 Filename DX7S_04Disclnfo fm DX7S 00 book Page 6 Tuesday September 14 2004 6 11 PM 6 EN DISC INFORMATION Discs For Playback Only Masterpage Left Unplayable Discs e You can use discs with the following logos for playback only DVD DVD VIDEO Video CD Super Video CD a COMPACT COMPACT d example of region code DIGITAL vipEo SUPERVIDEO indications 2 6 VIDEO CD VIDEO coMPACT Audio CD dice CD R alice CD DA files Se ee DIGITAL AUDIO Recordable compact CD RW compact CD ROM alice TDA PERI alice JPEG MP3 files ReWritable e Playback may not be performed depending on the characteristics and condition of the disc used e DTS Audio CDs can also be played back An optional DTS decoder is required and JPEG discs be played back on this unit only when they have been recorded in the 1509660 or Joliet format and finalised e JPEG files that can be played back on this unit must conform to JFIF Baseline process and the maximum resolution of a JPEG file is 2 812 x 2 112 pixels e CD R RW discs recorded in music CD format need to be final
70. ABEL1 SKYN SKY NEWS ADLT ADULT KAN2 KANAL2 SPEK SPEKTRUM ANIM ANIMAL PLANET 5 KANAL5 SPRT SPORT ANT3 ANTENA3 KBH KBH KANAL SRTL SUPER RTL ARD ARD KIKA KINDER KANAL STAR STAR TV ARTE ARTE LA7 LA7 SVT1 SVT1 ATV MAGYAR ATV LIB LIBERTY TV SVT2 SVT2 B1 BERLIN 1 LOCA LOCAL SV24 NEWS BBC BBC GROUP M6 M6 SWR SUEDWEST3 BBC1 BBC1 MBC MBR TCC TCC BBC2 BBC2 MCM MCM TCM TCM BBCW BBC WORLD MDR MDR TELE TELE BIO TV BIO MOVE MOVIE TELE5 TELE5 BLOO BLOOMBERG MTV MTV TF1 TF1 BR3 BAYERN3 MTV1 MTV1 TM TV DE MADRID C CANAL PLUS MTV2 MTV2 TMC TELEMONTECARLO C1 PORTUGUSES MTV3 MTV3 TMF TMF C9 VALENCIA NGEO NATIONAL G TNT TNT INT 5 5 N24 NEWS24 TRT TRT INT CANV KETNET CANVAS N3 NORD3 TSH TSI CANZ KANAAL Z N TV N TV TSI2 TSI2 CH4 CHANNEL4 NBC NBC SUPER TSR1 TSR CH5 CHANNEL5 NDR NDR TSR2 TSR2 CHLD CHILD NED1 NED1 TV1 BRTN TV1 CINE CINEMA NED2 NED2 TV2 TV2 CLUB TELECLUB NED3 NED3 TV2Z TV2 ZULU CMT CMT NET5 NETWORK5 TV3 TV3 CNN CNN NEWS TV3 TV3 PLUS CSUR ANDALUCIA NICK NICKELODEON TV4 TV4 CT1 CT 1 NOVA NOVA TV5 TV5 CT2 CT2 NRK1 NRK TV6 TV6 DISC DISCOVERY NRK2 NRK2 TV8 TV8 DK1 DENMARK1 ODE ODEON TVE1 TVE1 DK2 DENMARK2 ORF1 ORF1 TVE2 TVE2 DK4 DENMARK4 ORF2 ORF2 TVG TV GALICIA DR1 DR TV PHOE PHOENIX TVI TV INDEPENDENT DR2 DR2 POLS POL SAT TVN TV NORGE DSF DSF PREM PREMIERE TV24 TVN24 DUNA DUNA TV PRIM PRIMA TV TVP1 TVP1 ETB1 ETB1 PRO7 PRO7 TVP2 TVP2 ETB2 ETB2 RAM RAI TVP TV POLONIA ETV ETV RAI2 RAI2 V8 V8 EUNW EU
71. ANCEL then press ENTER 6 Press EDIT to return to the normal screen NOTE Even if a play list is deleted the titles recorded and the library information are not affected at all Modify Index 1 Perform steps 1 4 of Edit Scenes c pg 57 before continuing 2 Perform steps 5 8 of Modify Index gt pg 54 Modify Play List Name 1 Perform steps 1 4 of Edit Scenes c pg 57 before continuing 2 Perform steps 2 5 of Modify Title Name gt pg 54 Modify Category 1 Perform steps 1 4 of Edit Scenes gt pg 57 before continuing Perform steps 2 4 of Modify Category gt pg 55 eee 14 September 2004 18 11 e Masterpage Left Modify Library Information DVD DVD M VCD M Audio RAM VIDEOR SVCDR CD Title information can be registered in the unit s memory for up to 600 DVD discs 2 000 titles It is helpful when finding a desired title or play list by sorting according to the sort options registered during or after recording e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck CABLE SAT on CI HDD DVD Cc a acm ENTER NAVIGATION gt lt g
72. Audio Input Connectors VIDEO AUDIO L R gt pg 65 D Programme Buttons PR gt pg 35 38 46 D Front Display Panel gt pg 12 D DVD Lamp DVD gt pg 21 25 DVD Recording Lamp 0 gt pg 35 Infrared Beam Receiving Window D Insert Button INSERT gt pg 70 D Audio Dubbing Button A DUB pg 69 Recording Mode Button REC MODE gt pg 35 38 46 Play Button gt gt pg 25 40 D Record Button 6 r pg 35 38 Pause Button gt pg 25 40 DV Input Output connector DV IN OUT 551 DV OUT for DV Forward Search Button gt HDD amp DVD deck gt pg 26 amp HDD deck only gt pg 64 42 i Link refers to the IEEE1394 1995 industry specification and Fast Forward Button gt DV deck gt pg 44 45 extensions thereof amp logo is used for products compliant with the um i Link standard To access covered connectors pull and open the connector cover qe 10 e Tuesday 14 September 2004 s 4 2 55 SD Filename DX7S_O5Name fm e DX7S 00 book Page 11 Tuesday September 14 2004 6 11 PM Rear View S INDEX 11 S VIDEO OUT 0000000000 0000000000 COMF 5 m IN DECODER IN OUT L 2 Region Number Label gt pg 6 AC Power Cord gt pg 17 Cooling Fan e
73. BLE SAT DVD switch to DVD e Press DV HDD DVD SELECT on the unit repeatedly or DVD on the remote so that the DVD lamp lights up on the unit DV HDD DVD SELECT if CABLE SAT TV AV VIDEO DVD PR REMAIN DISPLAY 14 September 2004 18 11 Masterpage Left Instant Timer Recording ITR This easy method lets you record for from 30 minutes to 6 hours selectable in 30 minutes interval and shuts the unit off after recording is finished Press on the unit to start recording 2 Press e again to engage the ITR mode e On the front display panel 0 30 appears 3 you want to record for more than 30 minutes press 6 to extend the time Each press extends recording time by 30 minutes NOTES e You can only perform ITR using the 6 button on the unit e f DIRECT is set to pg 76 Instant Timer Recording ITR function does not work e When the recording capacity becomes full during timer recording or Instant Timer Recording the unit automatically performs Relief Recording gt pg 50 Watch Another Programme While Recording On The Unit While recording is going on you can watch another programme on the TV by using the TV s tuner NOTE It is required that the remote control is set to be
74. CODE ERROR CHECK DISC e A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit gt pg 6 om 88Tuesday 14 September 2004 18 11 Masterpage Left UNREADABLE DISC CHECK DISC e When an incompatible disc is loaded B has been pressed pg 6 COULD NOT FORMAT THE DISC CHECK THE DISC e Formatting is not complete since the disc may be dirty or damaged Take out the disc clean it and retry gt pg 9 82 CAN NOT FINALISE THIS DISC e Finalising is not complete since the disc may be dirty or damaged Take out the disc clean it and retry gt pg 9 83 CAN NOT CANCEL FINALISATION OF THIS DISC e Cancelling disc finalisation is not complete since the disc may be dirty or damaged Take out the disc clean it and retry 7 pg 9 83 PRESS STOP AGAIN TO STOP RECORDING e During Live Memory playback has been pressed gt pg 42 TIMER RECORDING COMPLETED e Timer recording has finished during Live Memory playback PLAYBACK WILL STOP THEN TIMER RECORDING WILL START e Timer recording finished during Live Memory playback then the next timer recording is about to begin while playback continues COPY PROHIBITED CAN NOT RECORD e An attempt has been made to record copy protected contents e An attempt has been made to record copy once contents on a disc that is not CPRM compatible such as DVD R COPY PROHIBITE
75. CODER connector to the decoder s 21 pin SCART connector using a 21 pin SCART cable 3 Perform the procedure as described in When Receiving A Scrambled Broadcast HDD amp DVD Deck Only 7 pg 80 e Tuesday 14 September 2004 me e Filename DX7S_12Subsidiary fm DX7S 00 book Page 75 Tuesday September 14 2004 6 11 PM Mode Set e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT Tv DVD lt gt SET UP AUDIO Various modes of this unit are categorized into menus nested in 2 levels shown in the following table To change the settings of these modes find the desired mode in the menu for details on each menu see pages 75 through 76 then follow the procedure below DVD VIDEO SET UP LANGUAGE SET pg 21 AUDIO OUTPUT r pg 75 PARENTAL LOCK pg 34 DISC PLAY SET UP r pg 76 HDD DVD DV SET UP HDD SET UP pg 76 DVD SET UP c pg 76 DISC SET UP c pg 82 83 DV SET UP lt pg 76 FUNCTION SET UP REC PLAY SET UP c pg 76 DISPLAY SET gt pg 77 VIDEO IN OUT gt pg 22 67 INITIAL SET UP TUNER SET rx pg 78 CLOCK SET gt pg 81 e The procedure below shows how to set the desired option of the AUDIO REC mode as an example 1 Press HDD or DVD so that the HDD or DVD l
76. Chapter Number Display Remaining Time Elapsed Time Indicator gt pg 28 36 Lights when remaining time of HDD DVD RAM DVD R and DVD RW discs is displayed and lights out when elapsed time is displayed The right 6 digits of the Multi Display D indicate elapsed or remaining time of each track No display Indicates elapsed time of the disc Displayed Indicates remaining time of the disc Remaining Time Elapsed Time Display gt pg 28 36 Multi Display Displays clock received channel elapsed time and remaining time Also displays status of the unit NO DISC OPEN CLOSE READING e Tuesday 14 September 2004 me o Filename DX7S 05Name fm e DX7S 00 book Page 13 Tuesday September 14 2004 6 11 PM Remote Control n CABLE SAT 5 0 mam gt cs 1 1 STANDBY ON TV AV 5 mr 086 m4 STOP CLEAR PAUSE AV VIDEO Button gt pg 36 39 46 TV Muting Button TV iX gt pg 71 Dv Button gt pg 44 This button will not function during navigation mode or set up mode HDD Button gt pg 38 This button will not function during navigation mode or set up mode Number Keys gt pg 35 38 Cancel Button X CANCEL gt pg 33 Auxiliary Button AUX gt pg 50 78 Live Button LIVE gt pg 42 Dubbing Button DUBBING gt pg
77. D CAN NOT PLAY e The unit has detected invalid contents at the start or in the middle of playback THE i LINK DEVICE THAT YOU HAVE CONNECTED IS NOT RECOGNIZED MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND POWERED ON e An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit e Check the connection gt pg 64 Ei qe 89Tuesday 14 September 2004 18 11 Filename DX7S_12Subsidiary fm DX7S 00 book Page 89 Tuesday September 14 2004 6 11 PM GENERAL Power requirement AC 220 V 240 50 Hz 60 Hz Power consumption Power on 45 W Power off 18 W Temperature Operating 5 C to 40 Storage 20 C to 60 C Operating position Horizontal only Dimensions WxHxD 435 mm x 96 mm x 383 mm Weight 6 7 kg Input Output Video input 0 5 2 0 Vp p 75 pin jack Audio input 8 dB 50 jack Corresponding to mono left Audio output 8 dB 1 pin jack 21 pin SCART connectors IN OUT x 1 IN DECODER x 1 RCA connectors IN x 1 OUT x 1 S video input Y 0 8 1 2 Vp p 75 Q C 0 2 0 4 Vp p 75 Q S video output Y 1 0 Vp p 75 Q C 0 3 Vp p 75 Q i Link 4 pin for DV IN OUT DV OUT For DV amp HDD Deck Only Component video output Y 1 0 Vp p 75 Q CB CR PB PR 0 7 Vp p 75 Corresponding to copy protection SAT Control 23 5 mm Digital audio output Optical 18 dBm 660 nm Coaxial 0
78. DD DVD RAM DVD R and DVD RW discs and when Linear PCM audio is played Cassette Loaded Mark 0 Indicates the present of a cassette in the DV deck Lights when a cassette is loaded into the DV deck It will remain lit as long as the cassette is loaded even if the HDD or DVD deck is being selected HDD DVD Timer Indicator 2 gt pg 48 Lights when the HDD or DVD deck is in the timer recording standby mode or when timer recording is in progress Recording Mode Indicator XP SP LP EP FR gt pg 35 Blinks when recording mode is being set While FR is blinking the left 3 digits of the Multi Display indicate setting values ranging from 60 to 480 After the value has been set only FR lights Group Title Indicator GRP TITLE GRP or TITLE lights depending on a disc loaded while the left 2 digits of the Multi Display indicate the numbers explained below GRP Total number of groups or group number being played back are displayed on the Multi Display TITLE Total number of titles or title number being played back are displayed on the Multi Display Channel Indicator Indicates the channel received lon 10 GRP 11 RND PRGM D Track Chapter Indicator TRK CHAP TRK or CHAP lights depending on a disc loaded while the 3rd and 4th digits from the left of the Multi Display indicate the numbers expl
79. DE ERROR appears on the TV screen For details refer to Region Number gt pg 6 e If CAN NOT PLAY BACK DISC UNDER CURRENT SETTING appears on the TV screen refer to Parental Lock gt pg 34 e With Video CD SVCD discs with PBC control or some DVD discs the menu display may appear on the TV screen after starting playback In this case select an item which you want to play back from the menu Otherwise the playback cannot go forward Refer to Playback Control PBC Function gt pg 29 or Locating A Desired Scene Using The DVD Menu gt pg 26 e The Library Database Navigation also enables you to search and select the desired titles gt pg 54 4 Press IM to pause playback e To resume normal playback press 5 Press to stop playback e When a recordable disc is played playback stops and a programme received with the unit s tuner resumes on the TV Screen e When a playback only disc is played playback stops and the still image at the time you press remains on the TV screen Pressing again resumes a programme received with the unit s tuner elf amp is pressed during playback playback stops then the disc tray opens NOTES e When the Library Database Navigation screen appears choose a thumbnail image of the desired title on the TV screen then press ENTER c pg 54 e t is not possible to playback the DVD disc recorded in 96 kHz on DVD during recording or Live Memory
80. ENTER to restart dubbing Tuesday 14 September 2004 me e Filename DX7S 11Editing fm e DX7S 00 book Page 65 Tuesday September 14 2004 6 11 PM Edit From A Camcorder EDITING EN 65 e Slide the TV CABLE SAT DVD switch to DVD You can use a camcorder as the source player and your unit as the recording deck If the camcorder has no S VIDEO output connector Recorder To VIDEO AUDIO MONO L R input Audio video cable not supplied To AUDIO input Recorder S VIDEO input S video cable not supplied Audio cable not S VIDEO OUT supplied Tr zx o o 3 7 zx o o g lt Z S o c 5 5 o gt T Recorder DV cable VC VDV 204VU not supplied Player a 1 Make connections If the camcorder has no S VIDEO output connector connect the camcorder s AUDIO VIDEO OUT connectors to the unit s VIDEO AUDIO MONO L R input connectors on the front panel
81. ET UP gt AREA SELECT EUTSCHLAND E Jorsen erem SETUP S ENTER SELECT WITH e THEN PRESS ENTER m PRESS SET UP TO EXIT 7 sevect Press AV lt D to select the language of your choice then press ENTER The AUTO SET T V LINK display appears on the TV screen d s INITIAL SET UP gt LANGUAGE SELECT usus RAND EASTERN REDERURUS Li SETUP ENTER el 212 mt SELECT WITH gt THEN PRESS ENTER n PRESS SET UP TO EXIT 7 SELECT 4 Press lt gt to select AUTO SET then press ENTER The AUTO SET screen will appear INTIAL SET UP gt AUTO CH SET 4 SETUP ENTER SELECT WITH THEN PRESS ENTER m e PRESS SET UP TO EXIT ATTENTION AUTO blinks on the front display panel do NOT press any button on the unit or remote control until the front display panel shows as illustrated on page 20 e When you have connected the unit to a TV offering T V Link via RATT a fully wired 21 pin SCART mar PRESS ISET UP TO EXIT cable gt pg 17 and the TV is turned on the unit automatically performs the Preset Download gt pg 19 even if you select AUTO SET for Auto Set Up function ext sevect INITIAL SET UP gt AUTO SET AUTO SET PLEASE WAIT C ATTENTION Once you have performed Auto Set Up even if the unit s memory backup has expi
82. Guide Programme Number Set ATTENTION You can use this function only with a TV offering T V Link etc Be sure to use a fully wired 21 pin SCART cable Compatible with TVs offering T V Link EasyLink Megalogic SMARTLINK Q Link or DATA LOGIC via a fully wired 21 pin SCART cable The degree of compatibility and available functions may differ by system CABLE SAT Hoo ENTER D on INITIAL SETTINGS 19 If you have connected the unit to your TV via a 21 pin SCART cable lt pg 17 the unit will automatically perform Preset Download instead of the Auto Set Up in step 4 on page 18 After downloading the unit sets the clock and Guide Programme numbers automatically eSlide the TV CABLE SAT DVD switch to DVD e Perform steps 1 to of Auto Set Up pg 18 before continuing Press lt D to select T V LINK and press ENTER The T V LINK screen will appear ATTENTION Preset positions on the front display panel increase from PR 1 do NOT press any button on the unit or ZEE sey T PRSE ENTER remote control until the front display 9 04 panel shows clock time PR 1 or as illustrated on page 20 e When Preset Download is completed COMPLETED appears for about 5 seconds then the normal screen appears e If yo
83. ION or EDIT e You cannot perform timer recording during editing of thumbnail images or play lists by pressing EDIT Press EDIT to clear the Editing screen before performing timer recording Ei Filename DX7S_10Navigation fm DX7S 00 book Page 54 Tuesday September 14 2004 6 11 PM 54 EN NAVIGATION ON HDD DVD DECK Scan For Beginning Of Title e Masterpage Left Modify Original Information e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck e Load a DVD disc to scan CABLE SAT TV DVD HDD CANCEL MEMO NAVIGATION AVS ENTER You can scan the beginning of the title easily with the Library Database Navigation 1 Press NAVIGATION The Library Database Navigation screen appears 2 Press AV lt D to select ORIGINAL then press ENTER Press AV lt I gt to select the index small pictures of the NAVIGATION gt ORIGINAL 0026 FISH WORLD 0143 MIN 25 1203 THU 10 00 10 15 Dl desired title then press FROGWORLD SELECT WITH 4 THEN PRESS ENTER ENTER e When you want the plural titles to be played back continuously press MEMO T after selecting the desired title The numbers of the playback order appear on the index You can select up to 8 titles e When you want to correct the orde
84. Index 1 Press EDIT The Editing screen appears 2 DVD deck only Press AV lt gt to select MODIFY under ORIGINAL PLAY LIST then press ENTER Press AV lt D to select MODIFY under ORIGINAL then press ENTER 4 Press AV lt I gt to select one title you want to modify then press ENTER 5 Press lt I gt to select INDEX Search for the picture from the title by pressing the appropriate buttons lt lt gt gt gt or Il The pictures of the title appear on the left window 7 Confirm the arrow is on x 9 ONREMOTE REPLACE then press 1 eum ENTER to register new index New index appears on the right window e When you press ENTER with the arrow on RETURN you can return to the previous screen 8 Press EDIT to return to the normal screen epiing gt MODIFY INDEX 25 2 08 THU 1000 1015 FROG WORLD gt Modify Title Name 1 Perform steps 1 4 of Modify Index gt pg 54 before continuing 2 Press AV lt D to select then press ENTER Press AV lt D to select the EDITING gt MODIFY NAME desired letter or command a ENEO then press ENTER Repeat this process to complete the PETER THEN PRESS ENTER name e To correct a letter press AV 4 to select DELETE then press ENTER e You can enter the letters up to 64 4 Press AV lt D to select SAVE then press ENTER 5 Press EDIT to r
85. K c 53 Using Library Database Navigation system you can easily modify registered information edit the title or play list as well as search for the beginning of each title About registration of information The following information is automatically registered for each title when ordinary recording or timer recording is performed then stored in an area specified on the unit e index reduced pictures to show programme titles e programme title e category e date and time e channel erecording mode e length of recording time The items marked with an asterisk can be easily modified and registered again after recording by using Library Database Navigation system The limitations of registration You can register information up to 99 titles for the DVD deck and 200 titles for the HDD deck When the amount of information is at the limits of registration you cannot record new titles any more In this case you need to delete old titles to register new one gt pg 55 NOTES e Once a DVD R RW Video mode disc has been finalised the displays for original and play list do not appear Only display for library appears e When you move the title recorded on HDD to DVD the icon will be changed to 9 e Sound of received channel may be interrupted while the Library Database Navigation screen is displayed e The order of index which are displayed by pressing DUBBING differs from the images displayed by pressing NAVIGAT
86. L OUTLET hazard remove the power cord from the mains outlet prior to DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF connecting or disconnecting any signal lead or aerial THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS ADVARSEL SYNLIG OG USYNLIG LASERSTRALING VED ABNING UNDGA UDSAETTELSE FOR STRALING SE IKKE IND STRALEN HELLER IKKE MED OPTISKE INSTRUMENTER ADVARSEL SYNLIG OG USYNLIG LASERSTRALING NAR DEKSEL APNES UNDGA EKSPONERING FOR STRALEN STIRR IKKE INN STRALEN ELLER SE DIREKTE MED OPTISKE INSTRUMENTER VARO AVATTAESSA OLET ALTTIINA N KYV JA N KYM T N LASERS TEILYLLE ALA TUIJOTA SATEESEEN L K KATSO SIT OPTISEN LAITTEEN L PI VARNING SYNLIG OCH OSYNLIG LASERSTR LNING N R DENNA DEL R PPNAD STR LEN R FARLIG STIRRA EJ IN STRALEN OCH BETRAKTA EJ STRALEN MED OPTISKA INSTRUMENT Dues EA Dy SHOWVIEW e Manufactured under licence from Dolby Laboratories Dolby and double D symbol are
87. N Mains power cord Back of unit 1 E VIDEO uiu oum V V ANTENNA our COMPONENT OUT VIDEO OUT Y Audio cable not supplied 21 pin SCART Component cable video cable S video cable supplied not supplied not supplied RF cable supplied TV 4 a n To 75 ohm terminal It s essential that your unit be properly connected ATTENTION Your TV must have a 21 pin AV input connector SCART for the basic connection to the unit THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED 1 sure the package contains all of the accessories listed in SPECIFICATIONS gt pg 89 2 Place the unit on a stable horizontal surface 3 Connect the unit to a TV depending on the TV and cables you use t INSTALLING YOUR NEW UNIT 17 Basic Connection To connect to a TV with 21 pin SCART input connector 1 Disconnect the TV aerial cable from the TV 2 Connect the TV aerial cable to the ANTENNA IN connector on the rear panel of the unit 3 Connect the ANTENNA OUT connector on the rear panel of the unit and the TV s aerial connector with the supplied RF cable
88. ND NEDERLANDS NORGE NORSK GREECE ENGLISH SVERIGE SVENSKA OTHER WESTERN gt ENGLISH DANMARK DANSK STERREICH gt DEUTSCH OTHER EASTERN ENGLISH CESKA ENGLISH REPUBLIKA If you want to change the language setting manually see screen Language Set gt pg 21 Just Clock Your unit is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals by reading data from a PDC signal If you want to take advantage of this function simply set it to ON gt pg 81 T V Link Functions When you connect the unit to your TV via a fully wired 21 pin SCART cable gt pg 17 the following functions are available You can use these functions only with a TV offering T V Link etc For details refer to the instruction manual of your TV Compatible with TVs offering T V Link EasyLink Megalogic SMARTLINK Q Link or DATA LOGIC via a fully wired 21 pin SCART cable The degree of compatibility and available functions may differ by system TV Auto Power On The TV will turn on and be set to its AV mode automatically whenever you start playback For details refer to the instruction manual of your TV Unit Auto Standby You can use your TV s remote control to turn off the unit For details refer to the instruction manual of your TV Direct Rec You can easily start recording the programme that you are watching
89. OFF ON When this function is set to ON the recording information is automatically stored in the library For details refer to Modify Library Information gt pg 58 iM CONTINUOUS PLAY OFF ON When this function is set to ON multiple titles on a disc are played back continuously one after another m VIDEO MODE RECORDING ASPECT PRIORITIZE 4 3 PRIORITIZE 16 9 This is the setting for the aspect ratio used when you dub titles to DVD discs in video mode If the titles you want to dub are recorded in both 16 9 and 4 3 you must select one aspect ratio PRIORITIZE 4 3 If you select PRIORITIZE 4 3 even a title recorded in 16 9 is dubbed in 4 3 PRIORITIZE 16 9 If you select PRIORITIZE 16 9 even a title recorded in 4 3 is dubbed in 16 9 VIDEO MODE RECORDING AUDIO MAIN SUB This is the setting for the audio channel to be selected when dubbing titles to DVD discs in video mode Select either one of the two settings if the titles to be dubbed have two audio channels MAIN Select this to dub the main channel SUB Select this to dub the sub channel MP3 amp WMA JPEG amp WMA JPEG You can select files to play back when both MP3 amp WMA files and JPEG files are recorded on a disc MP3 amp WMA Select this to play back MP3 WMA files JPEG Select this to play back JPEG files Masterpage Left DV SET UP DV AUDIO REC 12BIT 16BIT This is the setting f
90. ON ON HDD DVD DECK Divide Title HDD deck only 1 Press EDIT The Editing screen appears 2 Press AV lt D to select DIVIDE then press ENTER Press AV lt I gt to select a title to divide then press ENTER 4 Press gt and press 44 or gt gt to locate a point to divide then press 5 Confirm the arrow is on DIVIDE then press ENTER at the dividing point e The first picture start of the newly created title appears in the bottom right window 6 Press lt gt to select PREVIEW then press ENTER e The first several seconds of the newly created title is played back then the playback pauses at the dividing point e To undo the division press lt to select RETRY then press ENTER Repeat the above procedure to locate another point to divide 7 Press lt D to select then press ENTER 8 Press EDIT to return to the normal screen NOTE There may be a discrepancy of several seconds between the Scene you intend to edit and the scene which is actually edited Modify Chapter You can create and delete chapter marks in titles 1 Perform steps 1 4 of Modify Index gt pg 54 before continuing 2 Press AV lt D to select CHAPTER then press ENTER 3 Confirm the arrow is on MARK then press ENTER at positions you want to mark e The newly created chapter is displayed e To undo the marking press lt gt to select RETRY then pre
91. ONCE One Time Recording In this mode a programme will not be automatically overwritten WEEKLY OVERWRITE Weekly Recording Weekly Overwrite When the set weekly programme is broadcast the programme recorded last week is automatically deleted and overwritten by the new programme Save the title of each programme you wish to save then the recorded programme is saved and will not be overwritten by the new programme This week s drama Overwritten Last week s drama MON SUN FOR A WEEK MON SAT FOR A WEEK MON FRI FOR A WEEK Daily Recording Weekly Overwrite When the set weekly programme is broadcast the programme recorded on the same day last week is automatically deleted and overwritten by the new programme Save the title of each programme you wish to save then the recorded programme is saved and will not be overwritten by the new programme This we mu FRI lt Overwritten Y Vv Y wv V Last week we mu FRI MON SUN OVERWRITE MON SAT OVERWRITE MON FRI OVERWRITE Daily Recording Daily Overwrite When the set daily programme is broadcast yesterday s programme is automatically deleted and overwritten by the new programme Save the title of each programme you wish to save then the recorded programme is saved and will not be overwritten by the new programme Overwritten For the DVD deck ONCE One Time Recording WEEKLY
92. PARENTAL LEVEL then press ENTER 5 Press AV to select the desired level then press ENTER e The smaller the value of level is the more restrictive the OS CS SELECT WITH 42 THEN PRESS ENTER Parental Lock level becomes 9 Geor PRESS SETUP TO ENT e Select NONE to cancel the restriction Press the number keys to enter your desired four digit number then press ENTER e If you made a mistake enter a correct number again 7 Press AV to select COUNTRY CODE then press ENTER DVD VIDEO S LANGUAGE AUDIO OUTPUT PARENTAL LOCK DISC PLAY SET UP PARENTAL LEVEL ae COUNTRY CODE oa 14 September 2004 18 11 Masterpage Left 8 Press AV to select your country code then press ENTER e f you do not need to change your country code jump to 10 e See Country Area Code List for Parental Lock gt pg 91 9 Press the number keys to enter the same password as in step 6 above then press ENTER 1O Press SET UP to complete the setting NOTE Remember your password or make a note of it To Change The Settings e You can change the Parental Lock settings later 1 Perform steps 1 to 3 of To Set Parental Lock For The First Time to access the PARENTAL LOCK screen before continuing To change the level 2 Press AV to select PARENTAL LEVEL then press ENTER Press AV to select the desired level then
93. Page 74 Tuesday September 14 2004 6 11 PM 74 en SYSTEM CONNECTIONS When you can t switch the audio channel of a bilingual Connecting To A Dolby Digital Decoder Or An Amplifier With Built in DTS These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with built in DTS Dolby Digital Decoder or amplifier with built in DTS To DIGITAL AUDIO input Coaxial cable not supplied Optical cable not supplied To DIGITAL To DIGITAL AUDIO AUDIO OUT OUT OPTICAL COAXIAL ear of unit Note for connection Remove the protection cap from the optical cable 1 Connect the unit and Dolby Digital Decoder or an amplifier with built in DTS using either an optional optical cable or an optional coaxial cable NOTES For Dolby Digital sound set DIGITAL AUDIO OUT to DOLBY DIGITAL PCM gt pg 75 e For DTS sound set DIGITAL AUDIO OUT to STREAM PCM pg 75 CAUTIONS e This unit has a dynamic range of more than 110 dB with regards to its Hi Fi audio capability It is recommended that you check the maximum level if you are going to listen to the Hi Fi audio signals through a stereo amplifier A sudden surge in the input level to the speakers may damage them e Some speakers and televisions are specially shielded to prevent television interference If both are of the non shielded type d
94. Playback on HDD e VT E 14 September 2004 18 11 Filename DX7S 06DVD Operation fm DX7S 00 book Page 26 Tuesday September 14 2004 6 11 PM 26 EN BASIC OPERATIONS ON DVD DECK Playback Features e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD so that the DVD lamp lights up on the unit CABLE SAT Ho DVD 0 9 MARK TOP MENU ENTER AV lt gt MENU 4 gt gt 4 4 510W pp SLOW Locating A Desired Scene Using The DVD Menu DVD IN VCD RAM CD DVD VIDEO discs may have top menu and disc menu Top menu DVD discs generally have their own menus which show the disc contents These menus contain various items such as titles of a movie names of songs or artist information You can locate a desired scene by using the top menu displayed on the TV screen Press TOP MENU to access the top menu Disc menu Disc menus include playback data angle menu subtitle menu etc specific to each title Press MENU to access the disc menu 1 Press TOP MENU or MENU to access the DVD menu 2 Press AV lt D to select a desired title then press ENTER Playback starts e It may be possible to select the desired item using the number keys depending on the menu display NOTE When O appears on the TV scre
95. Press the number keys to enter the time then press ENTER Playback starts from the specified time Example To play back from a point 12 minutes 50 seconds elapsed TIME B m gt Press 1 Press 2 TIME 1886 TIME 1 2 8 gt Press 5 Press 0 TIME 12 5 5 If you have specified a wrong selection Press RETURN on the remote control unit and repeat the above procedures from step 2 To clear the on screen bar Press ON SCREEN e When is displayed on the TV screen step 3 you have selected a point that exceeds the recording time of the disc e Some DVD VIDEO discs do not contain time information and it is not possible to use the Time Search function In such cases 9 is displayed on the TV screen as well e This function is not possible for a Video CD SVCD with PBC function Masterpage Left Simulated Surround Effect e DVD DVD VCD Lu ips RAM VIDEO CD It is possible to get a simulated surround effect from your stereo system You can enjoy the virtual surround sound with your 2 channel stereo system 1 Press ON SCREEN twice to access the on screen bar 2 Press lt D to select inei then press ENTER e 3D ON appears above the selected item and Simulated Surround Effect is activated e Each time you press ENTER 3D ON appears and disappears alternately TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO E _ 4sc5 9
96. RAM Discs It is only possible to use discs which conform with DVD RAM standard Version 2 0 or 2 1 e It is impossible to record on DVD RAM discs which do not conform to this standard If you use a disc formatted under a different standard version format it on this unit before use e It may be possible to record play back edit or dub a DVD RAM disc even if it conforms to the standard if it was recorded or edited on the devices from other manufacturers or on a PC or if it has far too many titles or if there is very little available capacity remaining on the disc e DVD RAM discs recorded on this unit cannot be played back on an incompatible DVD player e t is possible to record copy once programmes of digital broadcasts only onto 4 7 9 4 GB DVD RAM discs 2 8 GB DVD RAM discs are not compatible e 5Tuesday 14 September 2004 18 11 e EN 5 Masterpage RightO DISC INFORMATION DVD R RW Discs It is only possible to use DVD R discs which conform with DVD R standard Version 2 0 When a DVD R RW disc Video mode is finalised gt pg 83 it can be played back on a standard DVD player as a DVD VIDEO disc When a DVD RW disc VR mode is finalised gt pg 83 it can be played back on a standard DVD player compatible with the VR mode of DVD RW discs Before finalising itis possible to record on unrecorded areas of the disc edit the disc title and programme titles and delete programmes
97. REEN NOTE JPEG files are played back as a slide show It may take more time to display an image with larger file size e Filename DX7S 06DVD Operation fm DX7S 00 book Page 34 Tuesday September 14 2004 6 11 PM 34 en BASIC OPERATIONS ON DVD DECK i Parental Lock E31 Ed E a E2 EZ This function restricts playback of DVD VIDEO discs which contain violent and other scenes according to the level set by the user For example if a movie which includes violent scenes supports the parental lock feature such scenes which you do not want to let children view can be cut or replaced by other scenes e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press DVD so that the DVD lamp lights up on the unit CABLE SAT Hoo y DVD 0 9 ENTER SET UP To Set Parental Lock For The First Time While stopped 1 Press SET UP to access the Main Menu screen 2 Press lt D to select DVD VIDEO SET UP then press V Press lt gt to select UI m rc PARENTAL LOCK then AUDIO OUTPUT PARENTAL LOCK pisc PLAY SET UP press V PARENTAL LEVEL Seas COUNTY 00DE SETUP _ ENTER SELECT WITH e THEN PRESS ENTER T JP TO EXIT EXT 7 SELECT 55 SET UP TO 4 Press AV to select
98. RO NEWS RAI3 RAI3 VCR VIDEO EURO EURONEWS RET4 RETE4 VH 1 VH 1 EUSP EUROSPORTS RTB1 TELE21 VIT VITAYA FEMM FEMMAN RTB2 RTBF1 or 2 VIVA VIVA FILM FILM RTL RTL VIV2 VIVA2 FNET FILMNET RTL2 RTL2 VMTV VIDEO MUSIC FR2 France2 RTL4 RTL4 VOX VOX FR3 France3 RTL5 RTL5 VSAT VIASAT3 GALA GALAVISION RTLK RTLK VTM VTM HBO HBO RTP RTP WDR3 West3 HR3 HESSEN3 RTV4 RTV4 WRLD WORLD HSEU H S EURO SAT1 SAT1 YLE1 YLE1 INFO INFO KANAL SBS6 SBS YLE2 YLE2 ITA1 ITALIA1 SERV Service YORN YORIN ITA7 ITALIA7 SF1 SF1 ZDF ZDF ITV1 ITV SF2 SF2 ZTV ZTV e e 93Tuesday 14 September 2004 18 11 e 2 D ond Filename DX7S 13IX fm DX7S 00 book Page 94 Tuesday September 14 2004 6 11 PM 94 en LIST OF TERMS A Repeat Playback 31 Accidental erasure prevention 47 Adjusting The Picture Quality 32 Angle Selection 4 004 2111 28 Audio Channel Selection 29 Audio Language Sound Selection 29 Auto Channel Set 78 C Cancel And Change Programmes 51 Check Programmes 51 Country Area Code List for Parental Lock 91 D Disc Rae be ce FERE RNC
99. S VIDEO DECODER Select VIDEO or S VIDEO to use this unit as the recording deck with the player connected to the L 2 IN DECODER connector or to use the satellite receiver connected to the L 2 IN DECODER connector VIDEO If a connected appliance s output is compatible only with regular video signals set to VIDEO S VIDEO If a connected appliance s output is compatible with Y C signals set to S VIDEO You can obtain high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal Select SAT VIDEO or SAT S VIDEO to view a satellite programme with the TV set while the unit is turned off gt pg 73 SAT VIDEO If a connected satellite receiver s output is compatible only with regular video signals set to SAT VIDEO SAT S VIDEO If a connected satellite receiver s output is compatible with Y C signals set to SAT S VIDEO For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal DECODER To use a decoder connected to the L 2 IN DECODER connector Tuesday 14 September 2004 B P gt Filename DX7S 11Editing fm DX7S 00 book Page 68 Tuesday September 14 2004 6 11 PM 68 EN EDITING NOTES e f you have a satellite receiver or a decoder connected to the L 2 IN DECODER connector be sure to set 1 2 SELECT back to appropriate mode after editing e If you are not
100. TED TIMER PROGRAMME appears on the TV screen you need to cancel some of the reserved programmes i pg 51 4 Press AV lt to select the desired date then press ENTER 5 Press AV to select RECORD PROGRAMME gt CALENDAR PR 2 3 TO then press ENTER Press AV to select the desired Ez recording deck then press sescrwmjas THEN PRESS ENTER sw e PRESS PROGRAMME 6 Press AV to select START pa then press ENTER Press AV to set the desired start time then press ENTER e Each press of AV increases decreases the start time in 1 minute interval e To increase decrease the start time in 30 minutes interval press and hold AV 7 Press AV to select STOP then press ENTER Press AV to set the desired stop time then press ENTER e Each press of AV increases decreases the stop time in 1 minute interval e To increase decrease the stop time in 30 minutes interval press and hold AV a ENTER EXT 958 807 peer 14 September 2004 18 11 e 8 Press AV to select PROG then press ENTER Press AV to select the desired channel 9 Press A V to select CONFIRM then press ENTER 10 Set the other recording options as required e Refer to step 8 in SHOWViEw Timer Programming gt pg 48 11 Press AV to select then press ENTER to access the Programme Confirmation DN 2500 Screen e PUT TITLE caroenne Th
101. TIONS ON DV DECK 44 Basic Playback Playback Features Basic Recording eu onere petet eire rtr erar ed Recording 9 neret nnns TIMER RECORDING ON HDD DVD DECK 48 SHOWVIEW Timer Programming 48 Manual Timer Programming eene 50 Automatic Satellite Programme Recording HDD Deck Only tec treten tret eee decern 52 NAVIGATION ON HDD DVD DECK Library Database Navigation Modify Original Modify Play List Information 2 Modify Library Information Playback With MP3 WMA JPEG Navigation EDITING DUDDING rette 60 DV Dubbing HDD amp DVD Deck Only 64 Edit From A Camcorder 65 Edit To Or From Another Recorder 66 Qutp vlnpU t Set rrr P EUR Ter 67 Digital Audio Dubbing sese 68 Audio Dubbing DV Deck Only 69 Insert Editing DV Deck Only een 70 REMOTE CONTROL 71 Remote Control Functions seen 71 SYSTEM CONNECTIONS 73 Connecting To A Satellite 738 Connecting To A Dolby Digital Decoder Or An Amplifier With Built in
102. The on screen bar allows you to control various playback functions Some of the functions operated on Navigation Menu can be controlled on the On screen bar ATTENTION The on screen bar can also be used for the HDD deck Be sure to clear Library Database Navigation screen by pressing NAVIGATION CABLE SAT Too NAVIGATION lt gt RETURN ENTER ON SCREEN How To Access The On screen Bar 1 Press ON SCREEN twice whenever a disc is loaded Contents of the on screen bar during playback DVD VIDEO TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO 27 el Iu E3 bb bob oo Video CD SVCD CINEMA TRACK 99 gt dese Gt ne 1 2 3 4 5 10 1 9 JPEG disc GROUP 99 TRACK 99 EACH 0 00 5 SEC T p 4 i 14 September 2004 18 11 JPEG Masterpage Left 1 Disc type 2 Select this for Repeat Playback gt pg 30 3 Select this for Repeat Playback gt pg 31 4 Select this for search function gt pg 31 5 6 Select this for time search function gt pg 32 Select this to switch Simulated Surround Effect function gt pg 32 7 Select this for Picture Control function gt
103. able to operate the TV in advance gt pg 71 1 During recording press TV AV VIDEO to select TV mode e Video mode is disengaged and the VIDEO indicator on the front display panel lights off VIDEO indicator lights off e The programme received on the TV s tuner is displayed on the TV screen 2 Slide the TV CABLE SAT DVD switch to TV Press repeatedly to select the desired channel NOTE If a decoder is connected to the unit gt pg 74 you can select a scrambled channel as well as other normal channels Elapsed Recording Time And Disc Remaining Time Indication During recording press DISPLAY repeatedly until the desired indication appears on the front display panel e Each time you press DISPLAY the time indication changes as follows Elapsed recording time Disc remaining time Clock Back to the beginning e You can also check the disc remaining time by pressing REMAIN while the unit is stopped or recording is in progress The list of disc remaining times for all recording modes appears on the TV Screen es VT E Ma 14 September 2004 18 11 Filename DX7S 06DVD Operation fm DX7S 00 book Page 37 Tuesday September 14 2004 6 11 PM Free Rate Function Masterpage Right BASIC OPERATIONS ON DVD DECK ey 37 Receiving Stereo And Bilingual Programmes To record the entire programme the unit automatically sets the appropriate
104. ack search when jump interval is set to 30 MIN jumps Time counter 0 min 40 min 1h 15 min 30 min 1h Beginning of Current scene End of programme programme Example 2 Recording search when jump interval is set to 15 MIN jumps Clock time 9 00 9 40 10 15 Current scene Beginning of End of programme programme Tuesday 14 September 2004 B t e S Filename DX7S_O8DV Operation fm DX7S 00 book Page 44 Tuesday September 14 2004 6 11 PM 44 en BASIC OPERATIONS ON DV DECK Basic Playback e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD DV HDD DVD SELECT CABLE SAT TV DVD oo GG OO OQ ooco e r 0 0 si 0 GIL b oWo i 14 September 2004 18 11 Masterpage LeftO 1 Load a cassette Make sure the window side is up the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit e Do not apply too much pressure when inserting e If the erase protection switch is set to SAVE playback begins automatically It takes about 15 seconds until the playback picture appears e The unit s power comes on automatically and the counter is reset to 0 00
105. age the Automatic Satellite Programme Recording mode e In step 4 if blinks quickly on the front display panel even though your satellite receiver s power is off Automatic Satellite Programme Recording will not work properly with that satellite receiver If this is the case perform Manual Timer Programming gt pg 50 to timer record a satellite programme Some satellite receivers output signals even if the power is off Automatic Satellite Programme Recording is not possible with those satellite receivers e X blinks on the front display panel while Automatic Satellite Programme Recording is in progress e For timer programming of the satellite receiver refer to the instruction manual of the satellite receiver e Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer e Pressing the unit s button while Automatic Satellite Programme Recording is in progress turns off the unit s power and disengages the Automatic Satellite Programme Recording mode e If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording it is not possible to set different recording modes for each programme e Depending on the type of satellite receiver the unit may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme e f you engage the Automatic Satellite Prog
106. ained below TRK Total number of tracks or track number being played back are displayed on the Multi Display CHAP Chapter number being played back are displayed on the Multi Display D Simulated Surround Effect Indicator 3D gt pg 32 Lights when a simulated surround effect is set to 30 on the on screen bar Random Programme Playback Mode Indicator RND PRGM gt pg 33 RND Lights when Random Playback mode is set PRGM Lights when Programme Playback mode is set B Repeat Mode Indicator 3 1 A B gt pg 30 Select Repeat Playback mode on the on screen bar c Whole disc is played back repeatedly A single title chapter track is played back repeatedly 5A B The selected part is played back repeatedly No display Repeat Playback mode is off D VPS PDC Recording Indicator gt pg 49 Lights when VPS PDC recording function is activated Video Output Indicator 9 gt pg 84 No display Indicates that interlace mode is engaged Indicates that progressive mode is engaged Example 9 lights when video output mode is in progressive mode D Automatic Satellite Programme Recording Indicator pg 52 Lights when the HDD deck is in the Auto Satellite Programme Recording standby mode Group Title Number Display D Audio Dubbing Insert Editing Indicator ADUB or INS lights up during Audio Dubbing or Insert Editing respectively D Track
107. al screen NOTE All the titles on a disc will be deleted once the disc is formatted even if they are protected titles gt pg 55 Delete Title You cannot record any more with Library Database Navigation once the registered titles on the disc reach 99 titles for the DVD deck and 200 titles for the HDD deck Deleting unnecessary titles after dubbing or other operations can increase remaining time and available recording capacity For DVD R discs although it is possible to delete recorded titles available recording capacity does not increase The deleted title is never resumed Play lists and title information in the unit s library are also deleted 1 Press EDIT The Editing screen appears 2 Press AV lt D to select DELETE under ORIGINAL then press ENTER Press AV lt D to select one title you want to delete then press ENTER 4 Press lt I gt to select DELETE then press ENTER e When you cancel the deletion select CANCEL then press ENTER 5 Press EDIT to return to the normal screen You can delete unwanted part of the title 1 Perform steps 1 3 of Modify Index gt pg 54 before continuing 2 Press AV lt D to select DEL SCENE then press ENTER Press AV lt D to select one title whose unwanted part you want to delete then press ENTER 4 The playback pictures appear in the window on the screen The elapsed playing time starts counting with the arrow on IN 5 Find the poin
108. amp lights up on the unit 2 Press SET UP to access the Main Menu screen Press lt D to select FUNCTION SET UP then press V 4 Press lt 1 gt to select PLAY SET UP then press V Function ser up 5 Press AV to select AUDIO REC then press ENTER B m 6 Press AV to select the desired wwe option then press ENTER SETUP SELECT WITH 46 gt PRESS TER 7 Press SET UP to complete the 00000 setting 14 September 2004 18 11 Masterpage RightO e SUBSIDIARY SETTINGS 75 The boldface settings below indicate the settings at your purchase AUDIO OUTPUT DIGITAL AUDIO OUT DOLBY DIGITAL PCM STREAM PCM PCM ONLY Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO OUTPUT connector DOLBY DIGITAL PCM Select this when you connect the digital input connector of a Dolby Digital Decoder or an amplifier with a built in Dolby Digital Decoder STREAM PCM Select this when you connect the digital input connector of an amplifier with a built in DTS Dolby Digital or MPEG multichannel decoder PCM ONLY Select this when you connect the linear PCM digital input of other audio equipment amplifier MD or DAT deck etc NOTES e This setting also functions when HDD is active e If you watch or play back a title which contains multiple
109. an CA Catalan LN Lingala SS Siswati CO Corsican LO Laothian ST Sesotho CS Czech LT Lithuanian SU Sundanese Welsh LV Latvian Lettish SW Swahili DZ Bhutani MG Malagasy TA Tamil EL Greek MI Maori TE Telugu EO Esperanto MK Macedonian TG Tajik ET Estonian ML Malayalam TH Thai EU Basque MN Mongolian TI Tigrinya FA Persian MO Moldavian TK Turkmen FJ Fiji MR Marathi TL Tagalog FO Faroese MS Malay MAY TN Setswana FY Frisian MT Maltese TO Tonga GA Irish MY Burmese TR Turkish GD Scots Gaelic NA Nauru TS Tsonga GL Galician NE Nepali TT Tatar GN Guarani OC Occitan TW Twi GU Gujarati OM Afan Oromo UK Ukrainian HA Hausa OR Oriya UR Urdu HI Hindi PA Panjabi UZ Uzbek HR Croatian PL Polish VI Vietnamese HU Hungarian PS Pashto Pushto Armenian PT Portuguese WO Wolof 1 Interlingua QU Quechua XH Xhosa IE Interlingue RM Rhaeto Romance YO Yoruba ZU Zulu 90Tuesday 14 September 2004 18 11 Kil Filename DX7S_12Subsidiary fm DX7S 00 book Page 91 Tuesday September 14 2004 6 11 PM Country Area Code List for Parental Lock Masterpage Right e APPENDIX cu 91 AD Andorra CK Islands GN Guinea AE United Arab Emirates CL Chile GP Guadeloupe AF Afghanistan CM Cameroon GQ Equatorial Guinea AG Antigua and Barbuda CN China GR Greece Al Anguil
110. an amp Scan Letter Box In general DVD VIDEO disc are produced for a wide screen TV with 16 9 aspect ratio Material with this ratio will not fit to a TV with 4 3 aspect ratio There are two styles to display the image Pan amp Scan PS and Letter Box LB Pan amp Scan ES The right and left side of the image are cut off The image fills the screen es e The picture will be shown in the 4 31 mode Ta depending on the disc even if the 4 3PS mode is selected Letter Box DER the image The image itself appears in 16 9 Black bands appear at the top and bottom of S aspect ratio Tuesday 14 September 2004 B Filename DX7S 05Name fm DX7S 00 book Page 23 Tuesday September 14 2004 6 11 PM Satellite Receiver Control Setting HDD amp DVD Deck Only Satellite receiver Satellite Controller provided suggested locations Your unit Transmitter Satellite receiver DECODER VCR B ES HEEBHBEBHS Gee 21 pin SCART cable supplied Satellite Controller supplied To SAT CONTROL e DECODER Back of unit CABLE SAT HDD DVD ENTER SET UP O O
111. appears on the TV screen In this case turn on the satellite receiver or set the TV to its TV mode or press TV AV VIDEO on the remote control to set the unit to the AV mode lad SYSTEM CONNECTIONS 73 Perfect Connections Recommended This is an example of recommended connections if your TV has two 21 pin AV input SCART connectors Connect the decoder to the satellite receiver s connector if you have a decoder L 1 IN OUT connector to TV s connector and L 2 IN DECODER connector to the satellite receiver s connector Then connect the satellite receiver and TV NOTES e Set L 2 SELECT to VIDEO or S VIDEO gt pg 67 e You can use the Automatic Satellite Programme Recording function pg 52 with this connection HDD deck only e To record a programme via the satellite receiver select L 2 mode by pressing PR so that L 2 appears on the front display panel e To receive a scrambled broadcast descramble the signal with the decoder connected to the satellite receiver e For details refer to the instruction manual of the satellite receiver and decoder TE unit Aerial Satellite cable TV aerial cable Satellite receiver 73 ANTENNA OUT Decoder e Tuesday 14 September 2004 me qm Filename DX7S 11Editing fm 1 DX7S 00 book
112. arts again if it is Switched to a recordable broadcast during the time you programmed IMPORTANT If you have moved to a different area or if a broadcasting station s channel number has been changed the wrong channel number will be displayed on the SHOWVIEW programme screen in step 7 When this happens set the correct Guide Programme number for that station gt pg 78 SHowVIEW System Setup Satellite Receiver Users To timer record a satellite broadcast using the SHOWVIEW system 1 Perform Satellite Receiver Control Setting HDD amp DVD Deck Only gt pg 23 2 Perform SHOWVIEW Timer Programming pg 48 3 Leave the satellite receiver s power on gil e Filename DX7S 09Timer Recording fm DX7S 00 book Page 49 Tuesday September 14 2004 6 11 PM Weekly Daily Recording Masterpage Right TIMER RECORDING ON HDD DVD DECK y 49 VPS PDC Recording You can record programmes with one of the following weekly daily timer settings For the HDD deck When you select a mode other than ONCE the space on the hard disk drive is saved for new recordings by overwriting previous recordings To prevent loss of a needed recording backup programmes you wish to save by dubbing them to DVD discs before overwriting previous recordings Or save the title of weekly daily programmes to avoid overwriting of a previous week day pg 51
113. ast e Recording continues when recording 2 Press to start Live Memory Playback e Playback resumes from the paused position 3 Press to resume the on air screen BASIC OPERATIONS ON HDD DECK y4 43 1 5x Speed Search You can play back a title quickly This feature can also be performed with normal playback 1 5x speed search cannot be performed during recording on HDD or DVD Press 4 9 to locate the point to start 1 5x speed search from 2 Press gt to resume playback Press gt once e Pressing ON SCREEN displays X1 5 on the top right corner of the screen NOTE When the unit is connected with a digital audio device using an optional optical cable set DIGITAL AUDIO OUT to PCM ONLY pg 29 Jump Search You can locate a scene ahead or behind the current one by jumping scenes according to selected time intervals gt pg 77 during playback or Live Memory Playback This feature is also available during recording or Live Memory Recording or when watching a TV received programme Press JUMP or JUMP e To advance forward or back press JUMP or JUMP repeatedly within 5 seconds of each press to continue jump e When you cannot advance any further beginning or end of programme reached the message UNABLE TO GO BACK ANY appears on the screen and the on air screen resumes In such a case press 44 lt lt lt or Example 1 Playb
114. ational indicators appear on the TV screen Messages appear in the selected language gt pg 21 OFF To turn off superimposed indications AUTO To superimpose operational indications for approximately five seconds just after the corresponding operation NOTES e Even when SUPERIMPOSE is set to OFF you can display the various operational indicators by pressing ON SCREEN To clear the operational indicators press ON SCREEN again e When you use this unit as the source player for editing be sure to set SUPERIMPOSF to OFF before starting gt pg 66 e When you select AUTO during playback the operation mode indicators may be disturbed depending on the type of disc being used iM BLUE BACK OFF ON When this function is set to the TV screen becomes all blue when receiving a channel not in use NOTE When you want to receive an unstable channel with poor signals set this function to OFF i DIMMER BRIGHT DIMMED You can change the brightness of the front display panel BRIGHT Normally select this DIMMED To dim the front display panel Blue lamp on the front display panel is turned off Masterpage Right SUBSIDIARY SETTINGS ey 77 POWER SAVE OFF ON When this function is set to ON you can reduce the power consumption while the unit is turned off NOTES e During Power Save mode the front display panel will be turned off the Just
115. audio languages select PCM ONLY in advance and choose main or sub audio with AUDIO i ANALOG AUDIO OUT STEREO DOLBY SURROUND Select the appropriate setting to accommodate the unit to the connected A V equipment This function takes effect when a DVD VIDEO disc is played back STEREO Select this when listening to conventional two channel stereo audio with the unit s AUDIO OUT connectors connected to stereo amplifier receiver or TV set or in case you want to record the audio from a DVD VIDEO disc to a Mini Disc etc DOLBY SURROUND Select this when listening to multichannel surround audio with the unit s AUDIO OUT connectors connected to an amplifier receiver with a built in surround decoder or a surround decoder D RANGE CONTROL NORMAL WIDE RANGE TV MODE The dynamic range the difference between the loudest sound and the quietest one can be compressed during playback of a programme encoded in Dolby Digital format This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume NORMAL Normally select this setting to activate this function WIDE RANGE Select this to deactivate this function when you enjoy wide dynamic range programme TV MODE Select this when you hear the sound through the TV s speaker s NOTES e This function has no effect on programmes other than that recorded in Dolby Digital format e This function does not work
116. back noise may appear or images may be garbled This is sometimes due to the disc It may not be up to industry standards These symptoms are caused by the discs not by the malfunction of the unit Masterpage Right DISC INFORMATION 9 e Ei o Filename DX7S 05Name fm e DX7S 00 book Page 10 Tuesday September 14 2004 6 11 PM 10 INDEX Front View 5 ON les VIDEO Y INSERT ADUB RECMODE bv IN our Cam Q t P ind ey Eject Button 4 DV gt pg 44 Mini DV Cassette Loading Slot Dv Lamp DV gt pg 44 DV Recording Lamp 0 pg 46 HDD Lamp HDD gt pg 21 38 HDD Recording Lamp 06 pg 38 Q Open Close Button gt pg 8 Q DV HDD DVD Select Button DV HDD DVD SELECT gt pg 25 38 44 e This button will not function during navigation mode or set up mode Stop Button lil gt pg 25 40 Disc Tray Reverse Search Button lt HDD amp DVD deck gt pg 26 42 Rewind Button 44 DV deck gt pg 44 45 D STANDBY ON Button 7 D S video Input Connector S VIDEO gt pg 65 B Video
117. back is not possible for a Video CD SVCD with PBC function Repeat Playback may not work properly depending on the type of the disc being used A B Repeat Playback EZ Ed Ed Ed E Ed Ej 3 3 RAM VIDEO cD You can repeat the desired part During playback 1 Press ON SCREEN twice to access the on screen bar 2 Press lt D to select CO 3 Press ENTER at the beginning of the desired part you want to repeat point A The elapsed playing time of the point A appears TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO E c Om ies C 4 Press ENTER at the end of the desired part you want to repeat point B The elapsed playing time of the point B appears e The selected part of the disc between point A and B is played repeatedly TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO E a se Om ies C To clear the on screen bar Press ON SCREEN Masterpage Right BASIC OPERATIONS ON DVD DECK c 31 To cancel A B Repeat Playback Press lt gt to select A B then press ENTER NOTES e A B Repeat Playback may not work properly depending on the type of disc being used e The subtitles recorded around the A B point may not appear e When the end of the item is reached before the end point is set the on screen bar disappears from the TV screen In such a case repeat the procedure from step 1 e The point B must be set at least 3 seconds a
118. cannot be played back e Discs of a region number other than 2 e DVD RAM 2 6 GB 5 2 GB e DVD RAM TYPE1 Region Number The world is divided into 6 regions for DVD VIDEO discs DVD VIDEO discs are assigned a region number to indicate which region they may be played back in A disc cannot be played back on this unit unless the region number of the disc matches that of the unit The region number for this unit is 2 Only discs whose region number includes 2 or ALL can be played back such as shown below Examples of DVD VIDEO labels which can be played back using this unit E Marks of discs in this instruction manual m Allows operation with a Allows operation with DVD RAM disc Video CD Super Video CD SVCD disc Allows operation with a Audio Allows operation with kd DVD R disc an Audio CD disc Allows operation with a Allows operation with E DVD RW disc wes disc including MP3 files rry Allows operation with Allows operation with a Impia DVD VIDEO disc disc including JPEG files gd e e 7Tuesday 14 September 2004 18 11 Filename DX7S_04Disclnfo fm DX7S 00 book Page 7 Tuesday September 14 2004 6 11 PM Recording Medium And Format DVD RAM e Recording and erasing can be performed as many times as possible on a disc e Editing can be performed after recording such as deleting unwanted parts e While recording it is pos
119. cene by using the menu 1 Press in stop mode The PBC menu appears 2 Press the number keys to enter the number of the desired scene The unit starts playback of the selected item e PBC appears on the front display panel e When NEXT or PREVIOUS appears on the TV screen Pressing NEXT gt gt I advances to the next page Pressing PREVIOUS 4 4 returns to the previous page e You can return to the menu by pressing RETURN e The method of the operation is different depending on the disc NOTES e f you want to playback a PBC compatible Video CD SVCD disc without activating the PBC function start playback in stop mode by using the number keys instead of the button to choose the track then press ENTER e To activate the PBC function when a PBC compatible Video CD SVCD disc is being played back without the PBC function press TOP MENU or press lil then press P To Move Back The Playback Position Slightly One Touch Replay Function DVD DVD Audio E3 Ed EJ E2 C3 3 You can move back the playback position slightly Press 67 e Each press skips back for approximately 7 seconds and resumes playback e Pressing while paused skips back for approximately 7 seconds and resumes pause sal Filename DX7S_O6DVD Operation fm e DX7S 00 book Page 30 Tuesday September 14 2004 6 11 PM 30 en BASIC OPERATIONS ON DVD DECK Using The On screen Bar DVD DVD Audio E E EM Ed dE
120. ch the audio channel The audio channel is played back as set in VIDEO MODE RECORDING AUDIO setting lt pg 76 14 September 2004 18 11 Masterpage Right BASIC OPERATIONS ON DVD DECK c 29 When you can t switch the audio channel of a bilingual programme When the unit is connected with a digital audio device using an optional optical cable and DIGITAL AUDIO OUT is set to DOLBY DIGITAL PCM it is not possible to switch the audio channel of a bilingual programme recorded on a DVD RAM or DVD RW VR mode disc gt pg 74 In this case perform the following steps using the remote control to switch DIGITAL AUDIO OUT from DOLBY DIGITAL PCM to PCM ONLY 1 Press SET UP to access the Main Menu screen Press lt gt to select DVD VIDEO SET then press V 31 Press lt gt to select AUDIO OUTPUT then press V 4 Press AV to select DIGITAL AUDIO OUT then press ENTER 5 Press AV to select PCM ONLY then press ENTER pg 75 6 Press SET UP to complete the setting 7 Press AUDIO to select the desired audio channel Playback Control PBC Function ol E3 Ex Some Video CD SVCD discs support the PBC function PBC is an abbreviation of Play Back Control A Video CD SVCD disc recorded with PBC has its own menus such as a list of the songs on the disc You can locate a specific s
121. ckup time Approx 60 minutes ACCESSORIES Provided accessories RF cable 21 pin SCART cable Satellite Controller Infrared remote control unit R6 battery x 2 E amp O E Design and specifications subject to change without notice ATTENTION This unit contains microcomputers External electronic noise or interference could cause malfunctioning In such cases switch the unit off and unplug the mains power cord Then plug it in again and turn the unit on Take out the disc After checking the disc operate the unit as usual effe Filename DX7S 12Subsidiary fm DX7S 00 book Page 90 Tuesday September 14 2004 6 11 PM 90 EN APPENDIX Masterpage LeftO Language Code List AA Afar IK Inupiak RN Kirundi AB Abkhazian IN Indonesian RO Rumanian AF Afrikaans IS Icelandic RU Russian AM Ameharic IW Hebrew RW Kinyarwanda AR Arabic Jl Yiddish SA Sanskrit AS Assamese JW Javanese SD Sindhi AY Aymara KA Georgian SG Sangho AZ Azerbaijani KK Kazakh SH Serbo Croatian BA Bashkir KL Greenlandic SI Singhalese BE Byelorussian KM Cambodian SK Slovak BG Bulgarian KN Kannada SL Slovenian BH Bihari KO Korean KOR SM Samoan BI Bislama KS Kashmiri SN Shona BN Bengali Bangla KU Kurdish SO Somali BO Tibetan KY Kirghiz SQ Albanian BR Breton LA Latin SR Serbi
122. ct the desired background from a selection of 18 backgrounds Press lt D to select then press ENTER 4 Press lt gt to select then press ENTER 5 Press SET UP to return to the normal screen e Menu screen is cleared Once a DVD R RW Video mode disc has been finalised the displays for original and play list do not appear Only display for library appears e Once a DVD RW VR mode disc has been finalised it can be played on DVD players compatible with VR mode Cancel The Finalisation Of A DVD RW Disc 1 Load a DVD RW disc to cancel the disc finalisation and perform steps 1 to 4 of Format A DVD RAM Disc gt pg 82 before continuing 2 Press AV lt I gt to select CANC FINALIS then press ENTER Press lt D to select EXECUTE then press ENTER 4 Press SET UP to return to the normal screen e When the disc finalisation is cancelled the mode in which the disc was formatted is restored making the disc recordable pg 7 82 Ei e 14 September 2004 18 11 Filename DX7S 12Subsidiary fm DX7S 00 book Page 84 Tuesday September 14 2004 6 11 PM 84 en SUBSIDIARY SETTINGS Scan Mode Set If you connect the unit and TV with Component Video Connection gt pg 17 you can select the scan mode from two modes Interlaced scan mode which is used in the conventional TV System and Progressive scan mode which enables reproduction of high
123. d channel Elapsed Recording Time Indication Press DISPLAY repeatedly until the desired indication appears on the front display panel e Each time you press DISPLAY the time indication changes as follows Tape remaining time Clock Elapsed recording time back to the beginning e e oon 14 September 2004 18 11 m Filename DX7S_O8DV Operation fm e DX7S 00 book Page 47 Tuesday September 14 2004 6 11 PM Instant Timer Recording ITR Masterpage Right BASIC OPERATIONS ON DV DECK c 47 Receiving Stereo And Bilingual Programmes e This easy method lets you record for from 30 minutes to 6 hours selectable in 30 minutes interval and shuts the unit off after recording is finished Press on the unit to start recording 2 Press e again to engage the ITR mode e On the front display panel 0 30 appears 3 you want to record for more than 30 minutes press 6 to extend the time Each press extends recording time by 30 minutes NOTES e You can only perform ITR using the 6 button on the unit e When the end of the tape is reached during timer recording or Instant Timer Recording the cassette is automatically ejected and the unit is shut off e If DIRECT is set to gt pg 76 Instant Timer Recording ITR function does not work e During Instant Timer Recording any other timer programmed recording won t start even if their start time
124. d or play lists then press MARK After selecting all indexes you want to dub press ENTER You can select up to 8 original recordings and or play lists 5 Press AV to select SELECT REC then press ENTER Press AY to select the desired option SP or LP then press ENTER 6 Press AV to SELECT SND MODE then press ENTER Press AV to select the desired option L R L or R then press ENTER e For DV format contents the sound mode selection is not available 7 Press V to select CONFIRM then press ENTER The confirmation screen appears 8 Press DV so that the DV lamp lights up on the unit The current display on the screen will be switched to a receiving broadcast display 9 while holding press I so that the DV deck enters the record pause mode 10 Press HDD so that the HDD lamp lights up on the unit e The dubbing screen will appear Press 1 to select EXECUTE then press ENTER for confirmation e To cancel the dubbing press the lil then lt gt to select CANCEL and press ENTER to confirm es EDITING 61 12 Upon completing dubbing the tape stops and DUBBING COMPLETED appears on the TV screen Press ENTER to end Original Dubbing From DVD To HDD It is possible to dub the original recordings on DVD discs to the HDD deck Load a disc you want to dub 2 Press DUBBING to access the Dubbing Menu screen Press AV lt I gt to select DVD
125. disc 2 Press DUBBING to access the Dubbing Menu screen Press AV lt gt to select HDD DVD then press ENTER 4 Press AV lt D to select JUST then press ENTER 5 Perform steps 5 6 of High Speed Dubbing From HDD To DVD NOTES e Play lists are dubbed as programmes e In Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list However the lower transfer rate cannot be dubbed in the higher transfer rate e The recordable time of the disc is displayed on the bar meter For details refer to About Disc Remaining Display lt pg 63 e During dubbing it is not possible to play back on HDD or DVD or to set timer programming Tuesday 14 September 2004 B e D and Filename DX7S 11Editing fm DX7S 00 book Page 61 Tuesday September 14 2004 6 11 PM Manval Dubbing From HDD To DVD It is possible to perform dubbing in the desired transfer rate Load a recordable disc 2 Press DUBBING to access the Dubbing Menu screen Press AV lt gt to select HDD DVD then press ENTER Press AV lt D to select MANUAL then press ENTER 5 Perform step 5 of High Speed Dubbing From HDD To DVD The Manual Dubbing screen appears 6 Press AV to select REC MODE then press ENTER Press AV to select the desired option then press ENTER
126. e BASIC OPERATIONS ON DVD DECK ey 27 Masterpage Right NOTES e DISC RESUME setting works on DVD VIDEO VCD SVCD and already finalised DVD R DVD RW video mode discs For other types of discs the function under ON setting will be applied even if RESUME is set to DISC RESUME gt pg 76 e If you stop the playback of a disc for which a resume point has already been memorised the memory will be updated with the new resume point e After the unit has memorised the resume points for 30 discs remembering a new resume point will cause the unit to delete the oldest memorised point Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored This may potentially change the order in which points are deleted e When the unit memorises a resume point for a disc it also remembers audio language subtitle and angle settings e This function may not work for some Video CD SVCDs e When RESUME is changed to ON or OFF lt pg 76 resume points of the discs memorised with RESUME set to DISC RESUME will be cleared e Resume points are memorised for each side of a double sided disc e When you switch to HDD during CD playback playback stops The Resume Function doesn t work when you switch to DVD thereafter to playback the disc Marking Positions To Play Back Again Later DVD DVD Audio E E E23 E3 2 It is possible t
127. e TV CABLE SAT DVD switch to DVD e Press DV HDD DVD SELECT on the unit repeatedly or HDD on the remote so that the HDD lamp lights up on the unit DV HDD DVD HDD Lamp SELECT nooo PR e CABLE SAT TV DVD TV AV VIDEO HDD PR REMAIN DISPLAY Instant Timer Recording ITR BASIC OPERATIONS ON HDD DECK 39 Watch Another Programme While Recording On The Unit While recording is going on you can watch another programme on the TV by using the TV s tuner NOTE It is required that the remote control is set to be able to operate the TV in advance gt pg 71 1 During recording press TV AV VIDEO to select TV mode e Video mode is disengaged and the VIDEO indicator on the front display panel lights off VIDEO indicator lights off e The programme received on the TV s tuner is displayed on the TV screen 2 Slide the TV CABLE SAT DVD switch to TV Press PR repeatedly to select the desired channel NOTE If a decoder is connected to the unit gt pg 74 you can select scrambled channel as well as other normal channels Elapsed Recording Time And Disc Remaining Time Indication During recording press DISPLAY repeatedly until the desired indication appears on the front display panel e Each time you press DISPLAY the ti
128. e When using Live Memory Playback during timer recording playback continues even after the end of the recording e When using Live Memory Playback during timer recording playback is automatically stopped just before recording starts and then recording starts when the time arrives for the next timer programme e t is impossible to perform ITR even if you press 6 during Live Memory Playback gt pg 39 Press W to display the programme being recorded then perform ITR settings e Playback may be paused for a moment during Live Memory Playback which does not interfere with recording e Live Memory Playback cannot be performed while recording the source from DV input gt pg 64 DV Dubbing e When LIVE CHECK is pressed to display the picture currently being recorded the picture size may not be correct e Press or LIVE to stop Live Memory Playback e Live Memory Playback cannot be performed even if the LIVE MEMORY in HDD SET UP is set to other than OFF as temporary recording on HDD stops during recording on DVD Tuesday 14 September 2004 me e gm Filename DX7S 07HDD Operation fm DX7S 00 book Page 42 Tuesday September 14 2004 6 11 PM 42 en BASIC OPERATIONS ON HDD DECK Buttons To Be Used During Live Memory Playback e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD so that the HDD lamp lights up
129. e playback e Each press of SLOW 4 4 or SLOW BB advances reverses the still picture frame by frame e To resume normal playback press Slow Motion Press to pause during playback 2 Press SLOW 44 or SLOW gt gt for 2 or more seconds e Each press of SLOW lt 4 lt 4 or SLOW BP increases the slow motion speed for each direction from 1 16 to 1 2 times the normal speed Skip Search During playback press w e Each press initiates an approximately 30 second period of fast motion playback Normal playback resumes automatically e Tuesday 14 September 2004 me Filename DX7S 07HDD Operation fm DX7S 00 book Page 41 Tuesday September 14 2004 6 11 PM Live Memory Playback e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD so that the HDD lamp lights up on the unit This unit records pictures onto the hard disc instead of video tapes then plays back the pictures recorded on the disc This makes it possible to achieve high speed writing and read out that has not been possible with conventional VCRs enabling recording and playback simultaneously BASIC OPERATIONS ON HDD DECK ey 44 Recording playback Status Display CABLE SAT TV DVD LIVE NAVIGATION High speed spin Cc Recordi
130. e skips back for approximately 30 seconds resumes playback Pressing repeatedly skips back for approximately 7 seconds continuously as many times as pressed It is useful when watching sports programmes etc LIVE CHECK Pressing once displays the picture currently being recorded and the one being played back simultaneously Pressing successively clears the Live Check window and displays only the picture currently being played back You can check for example if the programme you are recording has already finished Tuesday 14 September 2004 B e D an Filename DX7S 07HDD Operation fm DX7S 00 book Page 43 Tuesday September 14 2004 6 11 PM To Play Back The Previous Part Of The Channel Currently Recording or Watching You can play back the previous part of the channel you are recording or watching temporarily recorded on the background from the desired point lt pg 41 Temporary recording for Live Memory Press i4 or 4 to locate the point to start playback from e Each press of lt 44 increases the reverse search speed 2 Press to start Live Memory Playback Press to stop Live Memory Playback e The on air screen resumes NOTES e You can use various playback features during Live Memory Playback c pg 40 e If you have started actual recording by pressing 6 pressing lil in step 3 only resumes the on air screen To stop actual recording press again To
131. e sources such as lighted candles on the apparatus 8 AVOID violent shocks to the unit during transport Masterpage Right SAFETY FIRST en3 MOISTURE CONDENSATION Moisture in the air will condense on the unit when you move it from a cold place to a warm place or under extremely humid conditions just as water droplets form on the surface of a glass filled with cold liquid In conditions where condensation may occur disconnect the unit s power plug from the wall and keep it disconnected for a few hours to let the moisture dry then turn on the unit o ATTENTION To mobile phone users Using a mobile phone in the vicinity of the unit may cause picture vibration on the TV screen or change the screen to a blue back display On placing the unit Some TVs or other appliances generate strong magnetic fields Do not place such appliances on top of the unit as it may cause picture disturbance HOW TO USE THIS INSTRUCTION MANUAL e All major sections and subsections are listed in the Table Of Contents on page 4 Use this when searching for information on a specific procedure or feature e The Index on pages 10 13 illustrates the controls and connections on the front and rear panel the front display panel and the remote control e The list of terms on page 94 lists frequently used terms and the number of the page on which they are used or explained in the manual e The gt mark signals a refer
132. e to set the date and time e When you set the date press and hold AY to change the date by 15 days interval e When you set the time press and hold AY to change the time by 30 minutes interval 5 Press AV to select JUST CLOCK then press ENTER Press AV to set to the desired mode then press ENTER e The default setting is OFF e For the Just clock function refer to Just Clock on the right column e If you set to OFF you can disregard the next step as you won t be able to receive regular clock adjustments SETUP a ENTER SELECT WITH 4 THEN PRESS ENTER Bir 9 auge PRESS ISET UP TO EXIT Masterpage Right SUBSIDIARY SETTINGS 81 6 Press AV to select TV PROGRAMME then press ENTER Press AV to set the channel position to the number representing the station transmitting clock setting data then press ENTER e The unit is preset to receive clock setting and adjustment data from channel position 1 7 Press SET UP to start the clock operation NOTES e Just Clock when set to adjusts the unit s built in clock every hour except for 23 00 0 00 1 00 and 2 00 e Just Clock is not effective when the unit s power is on the unit is in the Timer mode adifference of more than 3 minutes exists between the built in clock s time and the actual time the unit is in the Automatic Satellite Programme Recording mode gt pg 52 HDD deck only th
133. e unit is in the Power Save mode lt pg 77 L 2 SELECT is set to SAT VIDEO or SAT S VIDEO pg 67 e f Just Clock is set to ON the unit s clock is automatically adjusted at the start end of Summer Time e Just Clock may not function properly depending on the reception condition Just Clock The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals by reading data from a PDC signal The Just Clock option can be set to or OFF at the Clock Set screen the default setting is OFF IMPORTANT If you turn off Just Clock the accuracy of your unit s built in clock may be reduced which could adversely effect timer recording We recommend you to keep Just Clock on In cases where the clock setting data from a PDC signal is incorrect however you are advised to keep Just Clock set to e Kil e 14 September 2004 18 11 Filename DX7S_12Subsidiary fm DX7S 00 book Page 82 Tuesday September 14 2004 6 11 PM 82 EN SUBSIDIARY SETTINGS Format A Disc DVD Deck Only DVD DVD Audio RAM VIDEO cD Some DVD RAM RW discs are unformatted Format the disc when you use an unformatted disc or you want to delete all recordings and data on the disc ATTENTION e When a disc is formatted all recordings and data are erased It is impossible to restore them e Never turn off the unit or d
134. each direction e To resume normal playback press For Audio CD You can perform 4 levels of speed search with gt and 4 4 Audio is active also during high speed search You cannot perform slow motion for each direction Ed e e Filename DX7S_O6DVD Operation fm DX7S 00 book Page 27 Tuesday September 14 2004 6 11 PM Still Picture Frame By Frame Playback DVD DVD Audio E31 Ed E E2 E3 i3 3 E3 1 Press I to pause during playback 2 Press SLOW 44 or SLOW gt gt to activate frame by frame playback e Each press of SLOW 4 4 or SLOW gt advances reverses the still picture frame by frame e Frame by frame playback for reverse direction cannot be performed with Video CD SVCD discs e To resume normal playback press Slow Motion DVD DVD Audio ee 1 Press I to pause during playback 2 Press SLOW 44 or SLOW gt gt for 2 or more seconds e Each press of SLOW 44 or SLOW BP increases the slow motion speed for each direction from 1 16 to 1 2 times the normal speed e Slow motion for reverse direction cannot be performed with Video CD SVCD discs Skip Search DVD VCD LU To RAM VIDEO SVCD CD During playback press w e Each press initiates an approximately 30 second period of fast motion playback Normal playback resumes automatically Resume Function E d EG ES Ed s E It is possible to mem
135. ear or USE CLEANING CASSETTE e There is no cassette loaded or the cassette loaded has had its message appears on the screen erase protection switch set to SAVE e The video heads may be dirty Insert a Mini DV cassette or set the erase protection switch set Use a dry cleaning cassette M DV12CL or consult your JVC to REC dealer broadcasts cannot recorded Recording DVD Deck e L 1 L 2 or F 1 has been selected as the input mode Set to the desired channel The desired programme cannot be recorded TEES Camcorder recording is not possible e The channel position does not correspond to that in the receiving area e The camcorder has not been properly connected Set the correct channel position for the receiving broadcast gt Confirm that the camcorder is properly connected gt pg 78 e The input mode is not correct Set the input mode to F 1 Recording cannot be made The tape is automatically rewound then the unit is shut off e No disc or a disc not being compatible with the unit is loaded Load a recordable disc on the unit gt pg 5 e The end of the tape was reached during recording e The disc loaded is not formatted The programme may not have been recorded in its entirety Format the disc gt pg 82 Next time make sure you have enough time on the tape to e A finalised DVD R disc is loaded record the entire pr
136. ear the on screen bar Press ON SCREEN NOTES e When is displayed on the TV screen in step 4 the chapter you have selected is not contained in the disc or chapter search does not work on the disc e Before you press ENTER playback may start automatically when you enter the section s number depending on the disc e This function is not possible for a Video CD SVCD with PBC function fe v o 14 September 2004 18 11 Filename DX7S_O6DVD Operation fm DX7S 00 book Page 32 Tuesday September 14 2004 6 11 PM 32 BASIC OPERATIONS ON DVD DECK CABLE SAT TV DVD gt On o 0 9 Ole o CANCEL ENTER RETURN gt 0 81 CLEAR i C FAD ON ON SCREEN Time Search 0 E3 E E E3 Ej You can play back a disc from the desired point by specifying the elapsed playing time from the beginning of a programme DVD RAM DVD R DVD RW DVD VIDEO and HDD or a disc Video CD SVCD and Audio CD 1 Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 DVD CINEMA AUTO ue O La 3
137. ection 28 T Temporary Recording 41 Muti 47 Time Search E 32 Fop ce cra Pa Poo terere a Taten 26 TV Station And ID List 0111 93 U Unplayable DisCs 22 pet 6 Usable cassettes 2 44 V VPS PDC Recording 49 Weekly Daily Recording 49 When Programmes Overlap Each Other 51 Tuesday 14 September 2004 me me e Filename DX7S 13IX fm en 4 DX7S_00 book Page 95 Tuesday September 14 2004 6 11 PM Masterpage Right No Headi MEMO en 95 95 Tuesday 14 September 2004 18 1 e 2 DX7S 14Cov4 fm a s 00 book Page 96 Tuesday September 14 2004 6 11 PM F 5 VICTOR COMPANY OF JAPAN LIMITED Printed in Germany COPYRIGHT 2004 VICTOR COMPANY OF JAPAN LTD 0904MNH SW VE 4 Page 96 September 14 2004 6 11 pm
138. en Press A V gt to select DVD gt DV then press ENTER 4 Press AV lt gt to select indexes small pictures of desired original recordings and or play lists then press MARK After selecting all indexes you want to dub press ENTER You can select up to 8 original recordings and or play lists 5 Press AV to select SELECT REC then press ENTER Press AY to select the desired option SP or LP then press ENTER The confirmation screen appears 6 Press AV to SELECT SND then press ENTER Press AV to select the desired option L R L or R then press ENTER e For DV format contents the sound mode selection is not available 7 Press V to select CONFIRM then press ENTER The confirmation screen appears 8 Press DV so that the DV lamp lights up on the unit The current display on the screen will be switched to a receiving broadcast display 9 while holding press I so that the DV deck enters the record pause mode 10 Press DVD so that the DVD lamp lights up on the unit e The dubbing screen will appear 1 1 Press lt D to select EXECUTE then press ENTER to confirm e To cancel the dubbing press then lt gt to select CANCEL and press ENTER to confirm 12 Upon completing dubbing the tape stops and DUBBING COMPLETED appears on the TV screen Press ENTER to end NOTES e It is not possible to dub play lists on DVD discs e t is not possible to dub Vide
139. en Display HDD deck When is set to AUTO and ON SCREEN on the remote control is pressed various operational indicators appear on the TV screen To clear the operational indicators press ON SCREEN twice When playing back a recorded title 5 6 pora STEREO REO 0 1 Title start 2 Current playback point 3 Title end 4 Elapsed playing time 5 6 Play mode Current received recording channel position number On playback background 7 Recorded title or play list number currently being played back 8 Name of title currently being played back 9 Time scale This title is an hour and a half long 10 Audio mode 11 Live Memory mode recording When watching a programme on air 12 Un 1 Possible start point from where Live Memory Playback can be performed 2 Possible start point from where Live Memory Recording can be performed Received channel has changed at this point Currently viewed point Time scale Current time Current received channel position number When using Live Memory playback 11 00 a 1 00 11 35 1 a 11 95 Time scale for Temporary Recording Current Temporary Recording point Current time Current playback channel position number Time scale for Live Memory Playback Current playback point Live Memory playback mode Current pla
140. en in step 1 the disc does not have a top menu or disc menu Example Masterpage Left Locating The Start Point Of The Item Or Skip The Item e DVD DVD Audio RAM VIDEO cD Press 144 or gt gt during playback e Pressing gt gt locates the start point of the item or skips the item in the forward direction then resumes playback e Pressing 44 locates the start point of the item or skips the item in the reverse direction then resumes playback When a DVD RAM RW R disc is played Current programme ON News Previous Drama Next Movie programme programme Reverse 144 PP gt e marked points gt pg 27 Forward Example To locate the beginning of the next item press gt I once To locate the beginning of the current item press I lt once To locate the beginning of the previous item press lt 4 three times When a DVD VIDEO Audio CD or Video CD SVCD disc is played Playback point Scene 3 Scene 4 Chapter 3 Chapter 4 or Track 2 Track 3 Track 4 Scene 2 Chapter 2 Reverse a lt g gt Forward Example To locate the beginning of the next item press gt once To locate the beginning of the current item press lt 4 once High Speed Search DVD DVD Audio ki E E E3 ka C3 ES During playback press for forward high speed search or reverse high speed search e Each press of the button increases the search speed for
141. en paes teer 12 Press lt D to select EXIT then press ENTER to complete timer programming Ier c pum e To programme another timer z press lt gt to select CONTINUE then press ENTER e f PROGRAMME OVERLAPPED appears on the TV screen See page 51 NOTES e When two successive programmes are recorded on a DVD RW disc with Manual Timer Programming function the beginning of the second one may be left off the recording e f the copy limited programme is received during timer recording the unit enters Record Pause mode Recording starts again if it is switched to a recordable broadcast during the time you programmed Masterpage Left ETE T TO EXIT WEEKLY DAILY MON FRI FOR A WEEK Satellite Receiver Users To timer record a satellite broadcast using Manual Timer Programming 1 Perform Satellite Receiver Control Setting HDD amp DVD Deck Only gt pg 23 2 Perform Manual Timer Programming gt pg 50 In step 8 press AUX to change TV PROG to SAT Then press AY to enter the channel position for the satellite broadcast Leave the satellite receiver s power on eo Relief Recording When a programme that is set for the DVD deck cannot be recorded properly the programme is recorded to the HDD deck instead in XP mode e If the remaining capacity of the hard disc is not sufficient
142. ence to another page for instructions or related information e Operation buttons necessary for the various procedures are clearly indicated through the use of illustrations at the beginning of each major section Ei e i Filename DX7S_03TOC fm DX7S 00 book Page 4 Tuesday September 14 2004 6 11 PM 4 en CONTENTS SAFETY FIRST 2 Safety Precautions 2 CONTENTS 4 DISC INFORMATION 5 ADOUtIDISCS tdi dete e rege laces 5 INDEX 10 INSTALLING YOUR NEW UNIT 17 2 17 INITIAL SETTINGS Auto Set Up cR e a AE Preset Download Language Donec C SAT CONTROL SET 23 Satellite Receiver Control Setting HDD amp DVD Deck 23 BASIC OPERATIONS ON DVD DECK 25 Basic Playback iii nire rre eter mitem rris 25 Playback Features eren tnn 26 Using The On screen 30 Parental Lock nennen nnne nnne 34 Basic Recording msa ente tertii tested ce ESSE ed 35 Recording Features eese ener nennen 36 BASIC OPERATIONS ON HDD DECK 38 Basic Recorditig io rrr err Recording Features Basic Playback Playback Feat res rre irte terres Live Memory 41 BASIC OPERA
143. er quality images Interlaced scan In the conventional video system a picture is shown on the display monitor in two halves The Interlaced scan system places lines of the second half of the picture in between lines of the first half of the picture Progressive scan Progressive scan displays all the horizontal lines of a picture at one time as a single frame This system can convert the interlaced video from DVD into progressive format for connection to a progressive display It dramatically increases the vertical resolution ATTENTION Your TV needs to be compatible with PAL Progressive Masterpage Left e Watch the images on DV deck in the Progressive scan mode via component video 1 Set the Progressive compatible TV to the component input mode 2 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit 3 Press PROGRESSIVE SCAN for 3 or more seconds e The video output indicator lights up on the front display panel 4 Press DV so that the DV lamp lights up on the unit then press PROGRESSIVE SCAN e COMP OFF is displayed on the front display panel It will be displayed for 5 seconds 5 Press PROGRESSIVE SCAN again within 5 seconds e COMP is displayed on the front display panel e The DV progressive scan image will then be outputted from the COMPONENT VIDEO OUT Y Pg Pg connectors NOTES e Be sure to engage the HDD or DVD deck in stop mode e To disengage the DV Progress
144. eral seconds between where you intend editing to start and where it actually starts Tuesday 14 September 2004 me D ad Filename DX7S 11Editing fm DX7S 00 book Page 69 Tuesday September 14 2004 6 11 PM Audio Dubbing DV Deck Only This function allows you to record new audio without erasing the original audio on a DV tape that was recorded with DV AUDIO set to 12BIT pg 76 ATTENTION You cannot perform Audio Dubbing on a tape that was recorded with DV AUDIO set to 16BIT pg 76 on a tape that was recorded at the LP speed or on a blank tape Your unit Recorder Audio cable not supplied AUDIO OUT CD player etc CD player etc Recorder EDITING 69 e Slide the TV CABLE SAT DVD switch to DVD 1 Connect an audio device to the unit s AUDIO input connectors on the front panel e When using a monaural audio device connect its AUDIO OUT connector to the AUDIO L input connector on your unit 2 Load a Mini DV cassette with the erase protection switch set to REC 3 Press DV HDD DVD SELECT on the unit repeatedly or DV on the remote so that the DV lamp lights up on the unit 4 Press to select F 1 5 Start playback
145. eturn to the normal screen PRESS EDIT TO EXIT EDIT CODD aine pur CANCEL DELETE 14 September 2004 18 11 Filename DX7S_10Navigation fm DX7S 00 book Page 55 Tuesday September 14 2004 6 11 PM Modify Category Masterpage Right NAVIGATION ON HDD DVD DECK 4 55 Delete Unwanted Part Of The Title DVD deck only o 1 Perform steps 1 4 of Modify Index gt pg 54 before continuing 2 Press AV lt D to select CATEGORY then press ENTER Press AV lt D to select the desired category then press SR EDITING gt MODIFY CATEGORY 0026 FISH WORLD j 25 12 03 THU 1000 1015 ENTER RO WORLD 4 Press EDIT to return to the ERES ES normal screen MEN EDIT ENTER EXIT O SELECT Protect Title DVD deck only You can protect titles to prevent accidental erasure of the important titles 1 Perform steps 1 3 of Modify Index gt pg 54 before continuing 2 Press AV lt D to select PROTECT then press ENTER Press AV lt I gt to select a title you want to protect then press ENTER 4 Press lt gt to select PROTECT then press ENTER appears e To cancel the protection repeat 3 4 again In step 4 select CANCEL PROTECT then press ENTER 5 Press EDIT to return to the norm
146. ff the unit s power once then turn the unit s power back on again The Country Set display appears on the TV screen perform Auto Set Up gt pg 18 or Preset Download gt pg 19 again IMPORTANT e To check if the Guide Programme numbers have been set correctly perform the SHowViEWw Timer Programming pg 48 e In certain reception conditions station names may not be stored correctly and auto Guide Programme Number Set may not work properly If the Guide Programme numbers are not set properly when you timer record a TV programme using the SHOWVIEW system the unit will record a TV programme of a different station When programming the timer using the SHOWVIEW system be sure to check the desired channel is selected correctly pg 48 e Your unit memorizes all detected stations even if reception of some of them is poor You can delete those stations with an unacceptable picture gt pg 80 Delete A Channel INFORMATION Language for the on screen display Auto Set Up also selects the language automatically for the on screen display depending on the Country setting you have made in step 2 on page 18 unless you have selected BELGIUM or SUISSE as shown below SUOMI gt SUOMI ITALIA ITALIANO PORTUGAL ENGLISH MAGYARORSZ G ENGLISH DEUTSCHLAND DEUTSCH ESPANA CASTELLANO POLSKA ENGLISH NEDERLA
147. fore starting the MP3 JPEG Navigation Root C file 1 mp3 r file 3 mp3 file 4 mp3 C file 2 mp3 POPS 5 mp3 Europe ROCK file 6 mp3 2 France lt ie 9 jpeg file 7 jpeg file 8 jpeg Directory 0 file lt gt JPEG file File structure of the disc after starting the MP3 JPEG Navigation Files are automatically grouped as follows and displayed on the MP3 JPEG Navigation screen Data is displayed in the alphabetical order of file name Files are grouped based on roots Root file 1 mp3 file 2 mp3 file 4 mp3 C file 6 mp3 2 file 7 jpeg file 8 jpeg France file 9 jpeg e This unit can recognise up to 9 hierarchies including directories and files Also it can recognise up to 250 files in each group and up to 99 groups on a disc NOTES e Video CD SVCD discs that support Playback Control PBC The contents of a disc are recorded into several hierarchies and played back according to the instructions on the screen while navigating through the hierarchies It is also possible to playback recorded tracks consecutively without activating the PBC function even when playing a PBC compatible disc gt pg 29 e Regarding the contents recorded on discs Some files may not be played back depending on the file types and other factors e e 8Tuesday 14 September 20
148. formed successfully the correct current time is displayed Turn on the TV and select its AV mode then make sure that all necessary stations have been stored in the unit s memory by using the PR button s e If station names ID gt pg 93 have also been stored in the units memory the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station e If you want to set the tuner manually such as to add or skip channels to change channel positions or to set or change station names see pages 79 80 If Auto Channel Set has succeeded but Auto Clock Set has not 1 channel position is displayed OR If both Auto Channel Set and Auto Clock Set have failed is displayed 1 Turn on the TV and select its AV mode then make sure that all necessary stations have been stored in the unit s memory by using the PR button s e If station names ID pg 93 have also been stored in the unit s memory the station name will be displayed at the top right corner of the TV screen for about 5 seconds when the unit is tuned to a different station e If you want to set the tuner manually such as to add or skip channels to change channel positions or to set or change station names see pages 79 80 Perform Clock Set gt pg 81 ATTENTION After making sure the cables are connected properly turn o
149. fter the point A e When playing back a DVD A B Repeat Playback is possible only within the same title e A B cannot be selected during Programme and Random Playback e A B cannot be selected while stopped Locating The Beginning Of A Desired Selection el RAM VIDEO cD You can locate the beginning of a title chapter group or track During playback or while stopped 1 Press ON SCREEN twice to access the on screen bar 2 Press lt D to select BM then press ENTER Press AV to select the desired item then press ENTER e Skip this step for Video CD SVCD and Audio CD For DVD RAM RW R DVD VIDEO TITLE SEARCH or CHAPTER SEARCH is selectable TITLE SEARCH is selectable only while stopped For JPEG MP3 GROUP SEARCH or TRACK SEARCH is selectable For Video CD SVCD Audio CD TRACK is selectable GROUP 99 CHAPTER 99 EACH 179 59 DVD 5 CINEMA m3 4sc5 Om ces TITLE SEARCH 4 Press the number keys to enter the desired item number then press ENTER e Playback starts from the selected section Examples To select track 5 press the number key 5 2 To select track 15 press the number key 1 and 5 3 To select track 25 press the number key 2 then 5 If you have specified a wrong selection Press RETURN on the remote control unit and repeat the above procedures from step 2 To cl
150. g again 7 Find the point where you want the created play list to end then press ENTER with the arrow on IN OUT The edit out time is fixed e Press 4 gt gt gt lt 4 or H to find the edit in and edit out points e The edit out point must come after the edit in point 8 Press AV lt I gt to select PREVIEW then press ENTER to preview the play list Press AV lt I gt to select OK then press ENTER The play list is created To modify the points 1 Press lt gt to select MODIFY then press ENTER Repeat steps 5 9 as necessary Press lt gt to select EXIT then press ENTER to return to the normal screen NOTES e There may be a discrepancy of several seconds between the scene you intend to edit and the scene which is actually edited e The title index and category of the play list can be modified in the same way as ORIGINAL gt pg 54 e You can modify the play list that has just been created here by adding moving or deleting unwanted parts to create a digest edition etc Edit Scenes aM EDITING gt PLAY LIST CREATE ES AE 1 Press EDIT The Editing screen appears 2 DVD deck only Press AV lt P to select MODIFY under ORIGINAL PLAY LIST then press ENTER 3 Press AV to select MODIFY under PLAY LIST then press ENTER 4 Press AV to select a play list to modify then pres
151. ge 73 Tuesday September 14 2004 6 11 PM Connecting To A Satellite Receiver Simple Connections This is an example of a simple connection if your TV has one 21 pin AV input SCART connector Connect the satellite receiver to the L 2 IN DECODER connector then connect the L 1 IN OUT connector to the TV s connector NOTES e Set L 2 SELECT to VIDEO or S VIDEO gt pg 67 e You can use the Automatic Satellite Programme Recording function gt pg 52 with this connection HDD deck only e To record a programme via the satellite receiver select L 2 mode by pressing PR so that L 2 appears on the front display panel e For details refer to the instruction manual of the satellite receiver 42 unit Aerial Satellite cable TV aerial cable 1 is Satellite receiver i 5 ANTENNA IN ANTENNA OUT t G Eme S IMPORTANT When you set L 2 SELECT to SAT VIDEO or SAT S VIDEO gt pg 67 itis possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off When the unit is in Stop mode or recording press TV AV VIDEO on the remote control to turn off the VIDEO indicator on the front display panel e If you turn on the unit when the satellite receiver s power is off nothing
152. he normal speed Then each press of the button reverses slow motion at 1 16 times 1 4 times and 1 2 times the normal playback O gt gt e Each press of the button during playback advances the playback speed in 4 steps in the forward direction Available only when paused e Each press of the button advances the still picture frame by frame e Pressing down for 2 or more seconds advances playback at 1 16 times the normal speed Then each press of the button advances slow motion at 1 16 times 1 4 times and 1 2 times the normal playback on e Pressing once during Live Memory Playback or Live Memory Recording returns to the screen on air e Pressing twice during recording stops recording and returns to the screen on air Pressing once pauses playback still picture playback Pressing repeatedly advances the still picture frame by frame JUMP Each press of the button during playback or Live Memory Playback jumps back for the selected time interval and resumes playback gt pg 43 Jump Search JUMP Each press of the button during playback or Live Memory Playback jumps forward for the selected time interval and resumes playback pg 43 Jump Search DA Pressing once skips forward for approximately 30 seconds and resumes playback Pressing repeatedly skips forward continuously as many times as pressed It is useful when skipping over unwanted sections Pressing onc
153. idental recording on a recorded cassette set its erase protection switch to SAVE To record on it later set the switch to REC Erase protection switch e P gt 14 September 2004 18 11 Filename DX7S 09Timer Recording fm DX7S 00 book Page 48 Tuesday September 14 2004 6 11 PM 48 en RECORDING ON HDD DVD DECK sHowview Timer Programming You can programme this unit to timer record as many as 16 programmes With the SHOWVIEW system timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise You can use the remote control to enter the SHOWVIEW number Masterpage LeftO 7 The SHOWVIEW number you entered and the matching timer recording information are displayed on the TV screen Check the programme data e To cancel this setting press RETURN e IMPORTANT Make sure the channel position number you wish to record is displayed if not see SHowViEW System Setup gt pg 78 and set the Guide Programme number correctly Make sure that the unit s built in clock is set properly e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD TV DVD CABLE SAT PROGRAMME ENTER lt gt RETURN DISPLAY
154. ion as required Press AY to select the desired setting then press ENTER e INPUT TITLE pg 54 Modify Title Name e CATEGORY pg 55 Modify Category e VPS PDC gt pg 49 VPS PDC Recording e WEEKLY DAILY gt pg 49 Weekly Daily Recording e REC MODE c pg 35 Recording Mode 9 Press AV to select OK then press ENTER to access the Programme Confirmation screen Press lt D to select EXIT then press ENTER to complete timer programming e To programme another timer press lt gt to select CONTINUE then press ENTER e f PROGRAMME OVERLAPPED appears on the TV screen see page 51 e The HDD DVD timer indicator lights up on the front display panel when the HDD or DVD deck is set to the timer recording standby mode It will blink under the following conditions Engaging timer recording standby mode when the clock is not set Engaging timer recording standby mode when timer programming has not been set e The end of the tape is reached during timer recording NOTES e There may be cases that the SHOwVIEW Timer Programming function prolongs the stop time of the programming e When two successive programmes are recorded on a DVD RW disc with the SHOWVIEW Timer Programming function the beginning of the second one may be left off the recording e If the copy limited programme is received during timer recording the unit enters Record Pause mode Recording st
155. ion capability e Keep pressing SET UP down during step 1 1 Enter your satellite receiver s brand code using the number keys then press ENTER 2 Press on the units remote control to turn on the satellite receiver and try operations gt step 3 Once you have set the remote control to operate the satellite receiver you do not have to repeat this step until you replace your remote control s batteries e Some brands of satellite receivers have more than one code If the satellite receiver does not function with one code try entering another 3 Press the corresponding buttons to operate the satellite receiver O I PR number keys e For some brands of satellite receivers you must press ENTER after having pressed the number keys e The number keys may not function with some satellite receivers BRAND NAME CODE JVC 73 AMSTRAD 60 61 62 63 92 CANAL SATELLITE 81 CANAL 81 D BOX 85 ECHOSTAR VIA DIGITAL 82 FINLUX 68 FORCE 89 GALAXIS 88 GRUNDIG 64 65 102 HIRSCHMANN 64 78 99 HUMAX 88 ITT NOKIA 68 KATHREIN 70 71 96 LUXOR 68 MASCOM 93 MASPRO 70 NOKIA 87 94 PACE 65 67 74 86 92 PANASONIC 74 92 PHILIPS 66 84 101 RADIX 78 RFT 69 SABA 97 SAGEM 83 90 SALORA 68 SAMSUNG 83 SIEMENS 64 SKYMASTER 69 98 TECHNISAT 66 100 THOMSON 97 TPS 83 TRIAX 91 WISI 64 Tuesday 14 September 2004 me e Filename DX7S 11Editing fm e DX7S 00 book Pa
156. ion screen gd P gt 14 September 2004 18 11 Filename DX7S_12Subsidiary fm DX7S_00 book Page 81 Tuesday September 14 2004 6 11 PM f Clock Set IMPORTANT If you performed Auto Set Up gt pg 18 or Preset Download gt pg 19 without ever having set the clock previously the unit s built in clock is also set automatically Perform the following steps only if Auto Clock Set has not been performed correctly by Auto Set Up or Preset Download OR you want to change Just Clock setting gt Just Clock in the right column e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD 1 Press SET UP to access the Main Menu screen 2 Press lt gt to select INITIAL SET UP then press V Press lt D to select CLOCK 3 POM eae INITIAL SETUP j then press V TUNER SET closer NOTE E EE oon When you have selected oe ty MAGYARORSZ G ESK mo KENN REPUBLIKA POLSKA or OTHER EASTERN for the country setting gt pg 18 you cannot use Just Clock function Skip steps 5 and 6 4 Press AV to select YEAR then press ENTER Press AV to set the year then press ENTER Repeat the same procedur
157. isconnect the mains power cord while NOW FORMATTING is displayed on the TV screen e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Load a DVD RAM RW disc to format CABLE SAT Hoo ENTER SET UP Masterpage Left Format A DVD RAM Disc e 1 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit 2 Press SET UP to access the Main Menu screen Press lt D to select HDD DVD SET then press V 4 Press lt gt to select DISC MEE ser ue SET UP then press V HDD SETUP DVD SETUP piscserup bvseruP 5 Press AV lt P to select FALSE FORMAT then press ENTER Press lt gt to select OK then press ENTER 6 Press lt gt to select then press ENTER Format A DVD RW Disc P ENTER STU m t SELECT WITH 4 THEN PRESS ENTER Bar PRESS ISET UPJ TO EXT 1 Perform steps 1 to 4 of Format A DVD RAM Disc as above before continuing 2 Press AV lt I gt to select FORMAT then press ENTER Press X D to choose VR MODE or VIDEO then press ENTER when DISC WILL BE FORMATTED appears on the TV screen VR To be chosen when you want to record erase or edit data on the disc
158. ised to play back on this unit e Operation and audio quality of this unit are not guaranteed for discs that do not conform to the Compact Disc specification CD DA Before you play back a CD check for the CD logo and read the notes on the package to confirm that it conforms to the Compact Disc specification e Depending on the intentions of the author of the software recording conditions of DVD discs and Video CD SVCD discs may be restricted Since this unit plays back discs according to the intentions of the author of the software as indicated on the disc some functions may not operate as commanded e When switching from the first layer to the second layer of double layered DVD VIDEO discs the image and sound may be momentarily distorted This is not a malfunction e DVD AUDIO discs compatible with DVD video players can be played e Super Audio CDs SACD compatible with conventional CD players can be played The following types of discs cannot be played using this unit Do not attempt to play back any kind of disc that is damaged cracked warped or repaired with adhesive tape or discs in unusual shapes heart shaped octagonal or other forms If such discs are accidentally played back it may cause noise that can lead to speaker damage e CD ROM discs including PHOTO CD and CD G e Discs recorded in Packet Write UDF format e 1 3 GB double density CDs DDCD e High density CDs HDCD The following discs also
159. isplayed by pressing DUBBING differs from the images displayed by pressing NAVIGATION or EDIT High Speed Dubbing From HDD To DVD It is possible to dub the original recordings and or play lists on the HDD deck to DVD discs The dubbing is performed in high speed keeping the original transfer rate NOTES e After accessing the Dubbing Menu screen it is not possible to take out a disc e It is not possible to dub copy once titles in Video mode e When dubbing a copy once title the data will be moved from HDD to DVD upon completing dubbing e When you cancel dubbing a copy once title during dubbing the original recording on the HDD deck remains and the title copied to a DVD disc is deleted e It is not possible to dub play lists which contain copy once titles e It is not possible to dub the following programmes to DVD R RW disc Video mode which contains more than one audio language which is on the play list which is edited also Live Memory Recording which is recorded in LP mode or FP155 FP240 mode e Recording may not be performed in the highest speed depending on the characteristics of the disc used Load a recordable disc 2 Press DUBBING to access the Dubbing Menu screen Press gt to select HDD DVD then press ENTER 4 Press AV lt P to select HIGH SPEED then press ENTER 5 Press AV lt gt to select indexes small pictures of desired original recordings and or play lis
160. istorted e A small portion of the recording which precedes an insert edit may become erased e Insert Editing is also possible with the L 1 IN OUT or L 2 IN DECODER connector on the rear panel When using these 21 pin SCART connectors be sure to select the correct input mode L 1 or L 2 in step 4 e Insert Editing is not possible using the DV IN OUT connector e Insert Editing is not possible on a blank portion of the tape e Tuesday 14 September 2004 me Filename DX7S 11Editing fm e DX7S 00 book Page 71 Tuesday September 14 2004 6 11 PM Remote Control Functions Remote Control 1 2 3 4 Code Switching The remote control is capable of controlling four JVC video units independently Each of the units can respond to one of four codes 1 2 3 or 4 The remote control is preset to send 3 code signals because your unit is initially set to respond to 3 code signals You can easily modify your unit to respond to 1 2 or 4 code signals e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV 1 ENTER e Keep pressing SET UP down during step 1 1 Press the number key 1 for 1 2 for 2 3 for 3 or 4 for 4 to change the remote control code then press ENTER 2 Press on the uni
161. it what to do after rewinding Before continuing make sure the unit is in the Stop mode For Automatic Start Of Playback Press 44 then press gt within 2 seconds For Automatic Power Off Press lt 4 then press 5 1 within 2 seconds Soundtrack Selection Your unit is capable of recording two soundtracks L and R and will play back the one you select During Playback Pressing AUDIO changes the soundtrack as follows TRACK USE On Screen Display L aR For stereo or Bilingual tapes For main audio of Bilingual tapes ai R For sub audio of Bilingual tapes NOTES e For instructions on recording stereo and bilingual programmes refer to page 47 DV Progressive Scan You can watch the images on DV deck in the Progressive scan mode via component video ATTENTION Your TV needs to be compatible with Progressive and to have Component video input connectors 1 Set the Progressive compatible TV to the component input mode 2 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit 3 Press PROGRESSIVE SCAN for 3 or more seconds e The video output indicator lights up on the front display panel 4 Press DV so that the DV lamp lights up on the unit then press PROGRESSIVE SCAN e COMP OFF is displayed on the front display panel It will be displayed for 5 seconds 5 Press PROGRESSIVE SCAN again within 5 seconds e COMP is displayed on the front di
162. itle a single chapter However chapter marks are automatically inserted when recording is paused or audio changes due to commercial breaks etc It is also possible to insert chapter marks at desired locations during either recording or playback Once the disc has been finalised these chapter marks are deleted and new chapter marks are assigned automatically approximately every 5 minutes DVD RAM DVD RW DVD R or DVD VIDEO disc Title 1 Title 2 Chapter 1 ee In Video mode even before finalising it is impossible to perform editing operations other than changing the disc name and or title names and deleting programmes and or titles e After finalising it is impossible to perform editing operations Masterpage Right DISC INFORMATION 7 Audio CD Video CD SVCD Typically Audio CD discs are divided into separate tracks each containing one song Each track is assigned a number For example the third track is Track 3 The same is true for Video CD SVCD discs However some discs are not divided into tracks Audio CD or Video CD SVCD Track 1 Track 2 Track 3 Track 4 JPEG MP3 Disc CD R RW ROM MP3 JPEG files put in directories nested in several levels on a disc will be organized as if they were put in single level directories groups by the MP3 JPEG Navigation of this unit gt pg 59 File structure of a disc be
163. ive Scan mode perform steps 4 and 5 to switch to OFF e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD HDD AT DV PROGRESSIVE SCAN 1 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit 2 Press PROGRESSIVE SCAN for 3 or more seconds e Video output indicator lights on the front display panel if Progressive scan mode has been established gt pg 12 e Each press of PROGRESSIVE SCAN for 3 or more seconds switches the scan mode NOTES e When the progressive mode is set be sure to set L 1 OUTPUT to COMPONENT gt pg 67 Progressive scan is output only from COMPONENT VIDEO OUT connector e Interlaced scan mode is the setting at your purchase e Interlaced scan mode might be suitable depending on video material e Scan mode cannot be set while menu screen is displayed e When the Progressive scan mode is engaged no video signal is output from L 1 IN OUT connector Tray Lock DVD Deck Only You can lock the disc tray to prohibit the unwanted disc ejection by children e Turn off the unit gt To lock tray While the unit is turned off press and hold then press on the unit LOCK ap
164. iver is not connected properly to this unit HDD and DVD deck only Connect the satellite receiver to the L 2 IN DECODER Ch Temm that 7 ioh t ly c pa 52 annel settings that were made manually seem to have connector properly I pg 927 changed or disappeared On the front display panel appears e After the manual settings were made Auto Channel Set was e Power failure occurred performed EIS Set date and time correctly gt pg 81 Perform Clock Set pg 81 PROGRAMME FULL appears on the TV screen during timer Malfunction occurs and the unit cannot be power off programming Reset the unit by disconnecting the AC power plug from the AC e 32 programmes have already been timer programmed outlet and connect again Clear unnecessary programmes on the unit then try timer programming again gt pg 51 The disc space does not increase when recorded titles are cleared e The PC s data recorded on a DVD RAM drive cannot be cleared on this unit Format the disc When the disc is soiled wipe the disc with a soft dry cloth before formatting gt pg 9 82 September 2004 18 11 Filename DX7S 12Subsidiary fm DX7S 00 book Page 88 Tuesday September 14 2004 6 11 PM 88 EN TROUBLESHOOTING On screen Message HDD amp DVD Deck Only DISC NOT REGISTERED IN THE LIBRARY REGISTER DISC e A disc that is not registered in the library has bee
165. ke sure of the disc remaining time before setting timer programming Example If you programmed to timer record for 60 minutes in SP mode on a 120 minute disc the disc remaining time would be 30 minutes in XP mode 60 minutes in SP mode 120 minutes in LP mode 180 minutes in EP mode and 240 minutes in FR480 mode Timer recording will not complete beyond these remaining times e The maximum recording time of FR JUST mode is the same as the recording time of FR480 mode When timer programming a long programme in FR JUST mode on a disc whose remaining time is short it is recommended to check the disc remaining time in FR480 mode to see if the remaining time is enough for the programme e Even if more than one programme are timer programmed in FR JUST mode only the first one is recorded e In order to ensure that the recording fits on the disc this feature may leave a slight non recorded section at the end of the disc e There may be some noise and sound disturbance at the point on the disc where the unit switches the mode Your unit is equipped with a Sound Multiplex decoder 2 and Digital stereo sound decoder NICAM making reception of stereo and bilingual broadcasts possible When the channel is changed the type of broadcast being received will be displayed on the TV screen for a few seconds Type of Broadcast Being Received On screen Display A2 Stereo ES A2 Bilingual Eug Regular Monaura
166. l Set 1 Press SET UP to access the Main Menu screen 2 Press lt D to select INITIAL SET UP then press V Press lt gt to select TUNER SET then press V 4 Press AV lt D to select AUTO CH SET then press ENTER 5 Press AV lt I gt to select your country s name then press ENTER 6 Press AV lt D to select the language of your choice 7 Press ENTER twice e When you have connected the unit to a TV offering T V Link via a fully wired 21 pin SCART cable lt pg 17 the unit automatically performs the Preset Download and the T V LINK screen will appear gt pg 19 e The Auto Set screen appears and remains on screen while the unit searches for receivable stations INITIAL SETUP AUTO CH SET MANUAL CH SET SAT CONTROL SET GUIDE PROG SET i 42 Lu ENTER SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT INITIAL SET UP gt AUTO SET PLEASE WAIT CANCEL SETUP ENTER 7 LS SELECT WITH 4 THEN PRESS ENTER PRESS SET UP TO EXIT 7 SELECT EM 14 September 2004 18 11 Filename DX7S_12Subsidiary fm DX7S 00 book Page 79 Tuesday September 14 2004 6 11 PM 8 View the Confirmation screen AUTO SET COMPLETED or SCAN COMPLETED is displayed on the TV screen 9 Press SET UP to complete the setting e Using the Confirmation screen
167. l emm NICAM Stereo NICAMCD NICAM Bilingual NICAM Monaural NICAM NOTES e SUPERIMPOSE must be set to AUTO Otherwise the on screen displays will not appear gt pg 77 e If the quality of stereo sound being received is poor the broadcast might be received in monaural with better quality Selection Of The Audio Channel To Be Recorded On A Disc When a programme is recorded on a DVD RAM or DVD RW disc in VR mode all audio channels of the receiving programme are recorded on the disc When you record a programme on a DVD R or DVD RW disc in video mode select the desired audio channel or MONO to be recorded on the disc gt pg 76 NOTE Before playing back a programme recorded in stereo or a bilingual programme refer to Audio Channel Selection gt pg 29 Ei NW e Filename DX7S 07HDD Operation fm e DX7S 00 book Page 38 Tuesday September 14 2004 6 11 PM 38 En BASIC OPERATIONS ON HDD DECK Basic Recording e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD ATTENTION The HDD on the unit requires approximately 20 seconds to start up after the unit has been turned on during which no operation can be made DV HDD DVD SELECT HDD Lamp CABLE SAT Hoo
168. la CO Colombia GS South Georgia and the South Sandwich Islands AL Albania CR Costa Rica GT Guatemala AM Armenia CU Cuba GU Guam AN Netherlands Antilles GW Guinea Bissau AO Angola CX Christmas Island GY Guyana AQ Antarctica CY Cyprus HK Hong Kong AR Argentina CZ Czech Republic HM Heard Island and McDonald Islands AS American Samoa DE Germany HN Honduras AT Austria DJ Djibouti HR Croatia AU Australia DK Denmark HT Haiti AW Aruba DM Dominica HU Hungary AZ Azerbaijan DO Dominican Republic ID Indonesia BA Bosnia and Herzegovina DZ Algeria IE Ireland BB Barbados EC Ecuador IL Israel BD Bangladesh EE Estonia IN India BE Belgium EG Egypt IO British Indian Ocean Territory BF Burkina Faso EH Western Sahara IQ Iraq BG Bulgaria ER Eritrea IR Iran Islamic Republic of BH Bahrain ES Spain IS Iceland BI Burundi ET Ethiopia IT Italy BJ Benin FI Finland JM Jamaica BM Bermuda FJ Fiji JO Jordan BN Brunei Darussalam FK Falkland Islands Malvinas JP Japan BO Bolivia FM Micronesia KE Kenya Federated States of BR Brazil FO Faroe Islands KG Kyrgyzstan BS Bahamas FR France KH Cambodia BT Bhutan FX France Metropolitan KI Kiribati BV Bouvet Island GA Gabon KM Comoros BW Botswana GB United Kingdom KN Saint Kitts and Nevis BY Belarus GD Grenada KP Korea Democratic People s Republic of BZ Belize GE Georgia KR Korea Republic of CA Canada GF French Guiana KW Kuwait CC Cocos Keeling Islands GH Ghana KY Ca
169. lding press gt on the remote control or press 6 on the unit NOTES e When you use the Direct Rec function be sure to use a TV offering T V LINK etc and connect a fully wired 21 pin SCART cable between the unit and the TV gt pg 17 e If DIRECT is set to OFF the button functions as described in Basic Recording gt pg 35 38 e During Direct Rec appears on the front display panel e f a programme is recorded with the Direct Rec the station name will not be registered in the library will be displayed for the station name e Even if there is no power supply for more than 60 minutes the unit keeps the setting e e 14 September 2004 18 11 Filename DX7S 12Subsidiary fm DX7S 00 book Page 77 Tuesday September 14 2004 6 11 PM INPUT COLOUR SYSTEM PAL SECAM You can play back PAL discs or record PAL and SECAM signals on this unit Select the appropriate colour system PAL To record PAL signals SECAM To record SECAM signals im JUMP TIME 15 MIN 30 MIN 1 HR You can locate a scene ahead of or behind the currently viewed one by jumping a selected time interval during playback or Live Memory Playback or recording or Live Memory Recording For details refer to Jump Search gt pg 43 DISPLAY SET SUPERIMPOSE OFF AUTO When this function is set to AUTO various oper
170. lect Press RETURN to return to the Manual Channel Set screen e Repeat steps 2 5 as necessary 7 Press SET UP to close the Confirmation screen Set Stations B Set station names other than the ones registered in your unit 1 Perform steps 1 5 of Manual Channel Set gt pg 79 2 Press AV lt I gt to select the channel you want to modify then press ENTER The Confirmation screen appears 3 Press AV to select ID then press ENTER 4 Press AV lt I gt to select the desired characters A Z 0 9 k space then press ENTER e Enter the remaining characters the same way maximum of 4 5 After entering all characters press AV lt gt to select OK then press ENTER 6 Press RETURN to return to the Manual Channel Set screen e Repeat steps 2 5 as necessary 7 Press SET UP to close the Confirmation screen NOTE The characters available for the station name ID are A Z 0 9 space maximum of 4 Fine Tuning Channels Already Stored 1 Perform steps 1 5 of Manual Channel Set pg 79 2 Press AV lt D to select the channel you want to fine tune then press ENTER The Confirmation screen appears 3 Press AY to select FINE then press ENTER 4 Press AV until the picture appears in its best quality then press ENTER e Repeat steps 2 4 as necessary 5 Press RETURN to return to the Manual Channel Set screen Press SET UP to close the Confirmat
171. lite programmes refer to page 52 To delete the index refer to page 55 e Recording sometimes may stop or cannot be performed even if there is enough available capacity remaining on the disc e t is not possible to record on both DVD and HDD simultaneously Recording Mode MPEG2 format is used as recording format As a guide for picture quality the bps unit is used to represent how much data can be recorded per second The larger this value is the better the picture quality becomes but more capacity is required for the recording Select XP or SP for programmes where quick movement occurs Such as sports programmes and LP or EP for talk shows etc with relatively less movement The recording modes for a 4 7 GB disc are set as follows Recording Recording amount Maximum recording mode approx time approx XP 10 Mbps 1 hour SP 5 Mbps 2 hours LP 2 5 Mbps 4 hours EP 1 6 Mbps 6 hours FR60 FR360 The amount varies 1 6 hours gt pg 37 depending on the FR420 selected time Pious FR480 8 hours e For details on FR mode refer to Free Rate Function gt pg 37 es JP Filename DX7S_O6DVD Operation fm DX7S 00 book Page 36 Tuesday September 14 2004 6 11 PM 36 En BASIC OPERATIONS ON DVD DECK Recording Features DVD II E Ed E E31 E3 Ex E2 EZ e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CA
172. me indication changes as follows Elapsed recording time Disc remaining time Clock Back to the beginning e You can also check the disc remaining time by pressing REMAIN while the unit is stopped or recording is in progress The list of disc remaining times for all recording modes appears on the TV screen Receiving Stereo And Bilingual Programmes Your unit is equipped with a Sound Multiplex decoder A2 and a Digital stereo sound decoder NICAM making reception of stereo and bilingual broadcasts possible When the channel is changed the type of broadcast being received will be displayed on the TV screen for a few seconds This easy method lets you record for from 30 minutes to 6 hours selectable in 30 minutes interval and shuts the unit off after recording is finished Press on the unit to start recording 2 Press e again to engage the ITR mode e On the front display panel 0 30 appears 3 If you want to record for more than 30 minutes press 6 to extend the time Each press extends recording time by 30 minutes NOTES e You can only perform ITR using the button on the unit e If DIRECT is set to ON gt pg 76 Instant Timer Recording ITR function does not work e When the recording capacity becomes full during timer recording or Instant Timer Recording the unit is automatically shut off D anh Type of Broadcast Being On screen Display
173. mme Pressing 144 returns to the beginning of the current selection To clear the on screen bar and the contents of the programme Press ON SCREEN To cancel Programme Playback Press lt gt to select then press ENTER NOTE Programme Playback is not possible depending on the type of disc Random Playback e DVD DVD Audio RAM VIDEO CD You can play back all the tracks on the disc in random order While stopped 1 Press ON SCREEN twice to access the on screen bar 2 Press lt gt to select RND then press ENTER Playback starts in random order TRACK 99 EACH 0 00 CINEMA 3002 C5 RND To clear the on screen bar Press ON SCREEN To cancel Random Playback Perform steps 1 and 2 NOTE The same track will not be played back more than once during Random Playback Select The Switching Interval Of The Slide Show DVD DVD Audio RAM VIDEO cD You can control the switching interval of the slide show 1 Press ON SCREEN twice to access the on screen bar 2 Press lt D to select then press ENTER The pop up window appears under the selected item GROUP 99 TRACK 99 5 SEC SS 4 T Press AV to select the desired option then press ENTER e Each time you press AV the interval changes as follows 5 SEC 10 SEC 15 SEC 20 SEC 25 SEC gt 30 SEC gt Back to the beginning To clear the on screen bar Press ON SC
174. n inserted Register the disc as necessary gt pg 58 INSERT DISC XXXX e Appears when a title that has been selected in the library is not contained in the loaded disc RECORD OR MAKE PLAY LIST DELETE UNWANTED TITLES e Recording and or editing cannot be performed e The number of titles exceeds 99 e The number of play lists exceeds 999 SET CLOCK BEFORE TIMER PROGRAMMING e To set the timer programme the clock must be set in advance pg 81 PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME e You can programme this unit to timer record as many as 32 programmes To programme more you need to cancel a timer programme already set gt pg 51 DISC NOT LOADED e Operation has been attempted when a disc is not loaded or loaded upside down gt pg 8 DISC NOT RECORDABLE INSERT RECORDABLE DISC e When a playback only disc or a finalised disc is loaded has been pressed gt pg 5 SHOWVIEW NO ERROR CONFIRM SHOWVIEW NO THEN RETRY e An invalid SHOWVIEW number has been input gt pg 48 GUIDE PROGRAM IS NOT SET SET GUIDE PROGRAM THEN RETRY e To set the timer programme using the SHOWVIEW system the Guide Programme Number must be set in advance gt pg 78 CAN NOT SET SHOWVIEW TIMER PROGRAMMING DURING TIMER RECORDING OR INSTANT TIMER RECORDING e Appears when you tried to input a SHOWVIEW number during timer recording or instant timer recording REGION
175. n press ENTER Em UT e When you want the plural play lists to be played back continuously press MEMO TER after selecting the desired play Ct suem lists The numbers of the playback order appear on the index You can select up to 30 play lists e When you want to correct the order move the arrow to the desired index and press MEMO The number disappears and the unit re numbers the other play lists automatically e When you want to cancel the order press CANCEL X 4 Press lt gt to select BEGINNING then press ENTER The playback starts 5 Press IM to pause playback e To resume normal playback press 6 Press to stop playback NAVIGATION gt PLAY LIST 0026 FISH WORLD 026 CREATED 26 12 03 FRI 143 MIN TEDDY BEAR 25 12 IMOVIE PRESS NAVIGATION 405 4006 TO EXIT Sp Filename DX7S_10Navigation fm D DX7S 00 book Page 58 Tuesday September 14 2004 6 11 PM 58 en NAVIGATION ON HDD DVD DECK Delete Play List 1 Press EDIT The Editing screen appears 2 DVD deck only Press AV lt gt to select MODIFY under ORIGINAL PLAY LIST then press ENTER Press AV lt D to select DELETE under PLAY LIST then press ENTER 4 Press AV lt I gt to select one play list you want to delete then press ENTER 5 Press lt gt to select DELETE then press ENTER e When you cancel the deletion select C
176. nel selector is not set to the AV mode Set the TV to its AV mode e When interlace scanned programme is played back progressive scan mode is selected Press and hold PROGRESSIVE SCAN until disappears from the front display panel gt pg 84 Playback does not start or stop immediately after playback is started by pressing gt On the front display panel DISC appears e The disc is loaded upside down Place the disc on the disc tray with the playback surface facing down pg 8 e A disc not being compatible with the unit is loaded Load a playable disc on the unit gt pg 5 e A dirty disc is loaded Clean the disc gt pg 9 e Defective disc is loaded Replace the warped or scratched disc with a normal one Images are blurred or distorted when you start High Speed Search mages are blurred or distorted at the point where the playback speed changes and this is not a malfunction of the unit Playback does not start Playback does not start for approximately 30 seconds after recording is stopped and this is not a malfunction of the unit Playback does not start when you select a title or a chapter e The Parental Lock is engaged and the disc is rated higher than the set level Release the Parental Lock temporarily or change the set level pg 34 Playback HDD Deck e The HDD deck is not selected Press DV HDD DVD SELECT on the unit
177. ng High speed writing Playback High speed read out Image figure of the hard disc It is called Live Memory Playback to start playback of the programme being recorded with a time lag between a recording point and a playback point as shown in the figure below Current playback point Live Memory Playback Current recording position Recording start point Recording point Playback Recording gt continues gt Continues 0 30 min 1 hour Currently elapsed recording time a a Not only can this unit play back a programme previously recorded while recording or timer recording another programme but the unit also allows you to play back from the beginning of a programme while continuing to record the same programme Temporary recording for Live Memory This unit automatically records the channel being received within the specified range of time to the reserved space on the hard disc The time range can be set for 30 minutes 1 hour and 3 hours pg 76 NOTE Previous temporary recordings will be overwritten since the unit is always recording the channel being received Thus it is not possible to play back TV programmes recorded beyond the specified range of time since they are already overwritten To avoid this in order to save titles perform normal recording gt pg 38 timer recording pg 48 50 or Live Memory Recording gt pg 43 About limitation on tempo
178. ng an appliance to the VIDEO input connector set to VIDEO S VIDEO When connecting an appliance to the S VIDEO input connector set to S VIDEO Digital Audio Dubbing You can dub selected audio from a DVD or Audio CD disc to a digital audio device However it is not possible to dub copy protected discs e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD Example Dubbing to an MD Recorder Digital audio device MD deck etc Coaxial cable not supplied Optical cable not supplied To DIGITAL AUDIO OUT COAXIAL To DIGITAL AUDIO OUT OPTICAL Rear of unit Note for connection Remove the protection cap from the optical cable 1 Connect the unit and digital audio device using either an optional optical cable or an optional coaxial cable 2 Place a disc on the unit and load an MD on the connected digital audio device 3 Select the audio to be dubbed 4 start playback slightly before the actual point from where you wish to start dubbing 5 Press IM to pause playback 6 Select the input mode on the connected digital audio device 7 Press gt to start playback on the unit 8 start recording on the digital audio device 9 Stop recording on the digital audio device Then press to stop playback on the unit NOTE There may be a discrepancy of sev
179. ngth of the item now being selected by arrow Red Excess over the capacity When performing the Just Dubbing __ _ _ I IC _ TOTAL 105MIN e The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate e The total time of a loaded disc is displayed on the right of the bar meter When performing the Manual Dubbing MAX FR240 e The unit displays the status on the assumption that the selected items are dubbed in the lowest transfer rate e The available highest transfer rate is displayed on the right of the bar meter NOTE The bar meter moves up and down regularly but this is not a malfunction Tuesday 14 September 2004 me e D ad Filename DX7S_11Editing fm DX7S 00 book Page 64 Tuesday September 14 2004 6 11 PM 64 EDITING Dubbing HDD amp DVD Deck Only You can dub programmes from a camcorder or DV equipment connected to the unit with a DV cable The unit s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing NOTES e Use the DV cable VC VDV 204U for connection e When you connect a PC to the DV IN connector we do not assure the normal operation of this unit Your unit To DV IN Camcorder DV cable VC VDV 204U not supplied amp 22 DV connector
180. nit as the source player connect its L 1 IN OUT connector to the recording deck 2 When using your unit as the recording deck connect its L 2 IN DECODER connector to the source player e If another recorder is compatible with the Y C signal when using your unit as the source player set L 1 OUTPUT to SCART S VIDEO gt pg 67 when using your unit as the recording deck set L 2 SELECT to S VIDEO gt pg 67 2 When using this unit as the recording deck press DV HDD DVD SELECT on the unit repeatedly to select the recording deck 3 when using this unit as the recording deck press PR to select L 2 e Set L 2 SELECT to VIDEO or S VIDEO lt pg 67 4 wnen using this unit as the recording deck press REC MODE repeatedly to set the recording mode 5 Engage the Play mode of the source player 6 Engage the Record mode of the recording deck 7 Stop recording on the recording deck then stop playback on the source player NOTES e All necessary cables can be obtained from your dealer e For Y C signal input output be sure to use a 21 pin SCART cable that is compatible with the Y C signal e When you use this unit as the source player for editing be sure to set SUPERIMPOSF to OFF before starting gt pg 77 If you are using another recorder with S Video and Audio output connectors connect its S Video and Audio output connectors to
181. o not place the speakers adjacent to the TV set as this can adversely affect the playback picture lon programme When the unit is connected with a digital audio device using an optional optical cable and DIGITAL AUDIO OUT is set to DOLBY DIGITAL PCM it is not possible to switch the audio channel of a bilingual programme recorded on a DVD RAM or DVD RW VR mode disc In this case perform the following steps using the remote control to switch DIGITAL AUDIO OUT from DOLBY DIGITAL PCM to PCM ONLY 1 Press SET UP to access the Main Menu screen Press lt D to select DVD VIDEO SET then press V 31 Press lt gt to select AUDIO OUTPUT then press V 1 Press AY to select DIGITAL AUDIO OUT then press ENTER 5 Press AV to select PCM ONLY then press ENTER gt pg 75 6 Press SET UP to complete the setting 7 Press AUDIO to select the desired audio channel Connecting Using A Decoder The L 2 IN DECODER connector can be used as an input connector for an external decoder descrambler Simply connect a decoder and you can enjoy a variety of programming that is available through scrambled channels Decoder TV aerial cable DECODER RF cable supplied 1 Set L 2 SELECT to DECODER c pg 67 2 Connect your unit s L 2 IN DE
182. o CDs SVCDs or Audio CDs e When dubbing is in progress only is functional D o Dubbing From DV To HDD Dubbing An Entire Cassette It is possible to perform automatic dubbing of all the recorded programmes of a cassette from the DV deck to the HDD deck using the ENTIRE dubbing Load the Mini DV cassette you want to dub Make sure its erase protection switch is set to SAVE e Set DV AUDIO to the appropriate mode gt pg 76 2 Press DUBBING to access the Dubbing Menu screen Press AV gt to select DV then press ENTER 4 Press lt D to select ENTIRE then press ENTER 5 Press AY to select SELECT REC MODE then press ENTER Press AY to select the desired option DV XP SP LP EP or FR then press ENTER 6 Press AV to SELECT SND MODE then press ENTER Press AV to select the desired option SOUND1 or SOUND2 then press ENTER 7 Press V to select CONFIRM then press ENTER The confirmation screen appears 8 Press lt D to select EXECUTE then press ENTER for confirmation e Once dubbing starts it will continue dubbing until the end of the tape is reached e To cancel the dubbing press lil then lt gt to select CANCEL and press ENTER to confirm e If the tape is not rewind the unit will start dubbing after automatically rewinding the tape to the beginning 9 Upon completing dubbing the tape stops and DUBBING
183. o mark positions up to 999 points where you want to play back once again later and start playback from a marked position Marking onto DVD RAM RW VR mode only discs when recording is helpful to locate a start point when you play back the discs later To mark positions During playback press MARK at positions you want to mark e MARK appears on the TV screen You can easily locate the marked positions using 44 or gt gt when you play back the disc To delete the marked positions While paused press 44 or BPI to locate a marked position you want to delete then press MARK e Crossed MARK appears on the TV screen and the marked position is deleted NOTES e When a monaural programme changes to a stereo programme while recording a mark signal is automatically recorded e Titles will be divided into chapters at the marked points according to the disc types as follows DVD R RW Video mode After finalising titles are divided into chapters at the marked points that are marked automatically approximately every 5 minutes during recording before finalising gt pg 83 DVD RW VR mode After finalising titles are divided into chapters at the marked points that are marked at the desired locations during playback before finalising gt pg 83 DVD RAM Titles are divided into chapters at the marked points that are marked at the desired locations during playback DVD VIDEO Creating of marked
184. ogramme Recording cannot be made on finalised discs Load a recordable disc on the unit e The disc is full or does not have enough space for the title to be e DV AUDIO REC had been set to 16BIT at the original Audio dubbing is not possible recorded recording Clear unnecessary titles on the disc or load a blank disc Set DV AUDIO REC to 12BIT at the original recording gt pg 55 e The tape speed had been set to LP at the original recording e The DVD RAM disc loaded has had its protect tab slid to the Set the tape speed to SP at the original recording protect position Release the protect tab gt pg 8 Monitoring the audio dubbed sound is not possible during audio dubbing This is normal Monitor the sound using the connected devices oo 14 September 2004 18 11 j ep o Filename DX7S 12Subsidiary fm 4 DX7S 00 book Page 87 Tuesday September 14 2004 6 11 PM Masterpage Right TROUBLESHOOTING Ey 87 Timer Recording HDD amp DVD Deck Other Problems m screen e Date and time is not correct Set date and time correctly gt pg 81 For basic connection e Timer recording is in progress Press PROGRESSIVE SCAN for 3 or more seconds so that the Timer programming can t be performed while a timer recording Video output indicator lights off on the front display panel is in progress Wait until it finishes For component
185. on the unit CABLE SAT TV DVD HDD ym LIVE Returns to on air programme screen When a confirmation message appears by pressing this button during timer programming or title editing etc follow the instruction to return to the previous screen NAVIGATION Displays Library Database Navigation menu You can choose a title to play back 4 e Pressing once skips back to the beginning of the chapter being played back e Pressing down for 2 or more seconds during playback reverses playback at 5 times the normal speed while pressed Releasing the button resumes normal playback Available only when paused e Pressing down for 2 or more seconds reverses playback at 1 16 times the normal speed gt gt e Pressing once skips forward to the beginning of the next chapter being played back e Pressing down for 2 or more seconds during playback advances playback at 5 times the normal speed while pressed Releasing the button resumes normal playback Available only when paused e Pressing down for 2 or more seconds advances playback at 1 16 times the normal speed O lt lt e Each press of the button during playback advances the playback speed in 5 steps in the reverse direction Available only when paused e Each press of the button reverses the still picture frame by frame e Pressing down for 2 or more seconds reverses playback at 1 16 times t
186. on the unit s remote control to turn on the TV and try operations gt step 3 Once you have set the remote control to operate the TV you do not have to repeat this step until you replace your remote control s batteries e Some brands of TVs have more than one code If the TV does not function with one code try entering another 3 Press the corresponding buttons to operate the TV TV AV VIDEO PR 21 TV 14 number keys e For some brands of TVs you must press ENTER after having pressed the number keys BRAND NAME CODE JVC 01 03 HITACHI 10 MAGNAVOX 02 MITSUBISHI 03 PANASONIC 04 11 RCA 05 SHARP 06 SONY 07 SAMSUNG 12 SANYO 18 SEARS 18 TOSHIBA 08 ZENITH 09 Tuesday 14 September 2004 B e an Filename DX7S 11Editing fm Is DX7S 00 book Page 72 Tuesday September 14 2004 6 11 PM 72 en REMOTE CONTROL Satellite Receiver Multi Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set In addition to JVC satellite receivers other manufacturer s satellite receivers can also be controlled e Slide the TV CABLE SAT DVD switch to CABLE SAT IMPORTANT Although the provided remote control unit is compatible with JVC satellite receivers as well as many other models it may not work with your satellite receiver or in some instances may have limited funct
187. on your TV When you use this function set DIRECT REC to ON pg 76 Tuesday 14 September 2004 B e Filename DX7S 05Name fm Language DX7S 00 book Page 21 Tuesday September 14 2004 6 11 PM INITIAL SETTINGS EN 21 On screen Language Set This unit offers you the choice to view on screen messages in 10 e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD different languages 1 Press HDD or DVD so that the HDD or DVD lamp lights up on the unit 2 Press SET UP to access the Main Menu screen Tv CABLE SAT DvD ENTER SET UP n Press lt gt to select FUNCTION SET then press V 4 Press lt gt to select DISPLAY FUNCTION ser up SET then press V REC PLAY SETUP DISPLAY SET_ VIDEO IN OUT 5 Press AV to select ON SCREEN LANGUAGE then press ENTER EINEN 6 Press AV to select your Laas desired language then press emu n ENTER 7 Press SET UP to complete the setting Menu Audio Subtitle Language Set DVD deck only Some DVD discs contain the DVD menu display audio and subtitles in multiple languages With these discs you can set the default language as you like e The
188. or sound mode before recording on a Mini DV tape 12BIT Enables Audio Dubbing later 16BIT Audio Dubbing is not possible but the recorded sound quality is higher than 12BIT AUDIO MODE SOUND1 SOUND MIX You can select the desired sound mode when playing back an audio dubbed Mini DV tape SOUND1 Original recorded sound SOUND2 Audio dubbed sound MIX Original recorded sound and audio dubbed sound NOTES e When AUDIO MODE is set to MIX both the main and sub audio will be audible for bilingual tapes e To select only the main audio or only the sub audio of bilingual tapes set AUDIO MODE to SOUND1 REC PLAY SET UP m XP MODE REC AUDIO DOLBY DIGITAL LINEAR PCM You can select the audio format when you record a title in XP mode When this function is set to LINEAR PCM you can obtain a high quality audio sound DOLBY DIGITAL To record in Dolby Digital format LINEAR PCM To record in Linear PCM format m AUDIO REC NICAM MONO You can select the desired NICAM audio channel to be recorded on a DVD R RW Video mode disc NICAM To record the main and sub language of NICAM audio MONO To record the standard monaural sound of NICAM audio NOTE This function works only for the NICAM bilingual programme DIRECT REC OFF ON When this function is set to ON you can easily start recording the programme that you are watching on your TV While ho
189. orise the position where you stop playback and resume playback from that position e Be sure to set RESUME to or DISC RESUME pg 76 1 Press mi during playback to memorise a resume point e The unit enters Resume Stop mode and memorises the position where you have stopped playback as a resume point The inside of the disc status indicator on the front display panel blinks while memorising e The unit retains a memory of the resume points of the last 30 discs played back even though they have been ejected if RESUME is set to DISC RESUME c pg 76 e To clear the resume points The inside of the disc status indicator stops blinking and lights When RESUME is set to ON e Press 0 1 to turn off the unit Press to take out the disc e Press in stop mode Press TOP MENU to display the top menu then start playback by selecting an item etc Press MENU to display the disc menu then start playback by selecting an item etc When RESUME is set to DISC RESUME Set RESUME to gt pg 76 e Press in stop mode Press TOP MENU to display the top menu then start playback by selecting an item etc Press MENU to display the disc menu then start playback by selecting an item etc 2 Press gt stop mode to resume playback The unit starts playback from the resume point 14 September 2004 18 11
190. pe during recording or playback Press lt gt to select FUNCTION SET UP then press V 4 Press lt gt to select VIDEO IN OUT then press V 5 Press AV to select MONITOR TYPE then press ENTER 6 Press AV to select the desired option then press ENTER 7 Press SET UP to complete the setting FUNCTION ser up REGPLAYSETUP DISPLAY SET VIDEO IN OUT mey e CENTER SELECT WITH 4 THEN PRESS ENTER Bir S PRESS SET UP TO EXIT The boldface settings below indicate the settings at your purchase MONITOR TYPE 4 3LB 4 3 5 16 9 AUTO 16 9 FIX 4 3LB Letter Box conversion Select this when the aspect ratio of your TV is 4 3 conventional TV While viewing a wide screen picture the black bars appear on the top and the bottom of the screen 4 3 5 Pan amp Scan Select this when the aspect ratio of your TV is 4 3 conventional TV While viewing a wide screen picture the black bars do not appear however the left and right edges of the pictures will not be shown on the screen 16 9 AUTO Wide television conversion Select this when the aspect ratio of your TV is 16 9 wide TV 16 9 FIX Wide television conversion Select this when the aspect ratio of your TV is fixed to 16 9 wide TV The unit automatically adjusts the screen width of the output signal correctly when playing back a picture whose aspect ratio is 4 3 P
191. pears on the front display panel and the disc tray is locked To unlock tray While the unit is turned off press and hold lil then press amp on the unit UNLOCK appears on the front display panel gd e Filename DX7S 12Subsidiary fm DX7S 00 book Page 85 Tuesday September 14 2004 6 11 PM Before requesting service for a problem use this chart and see if you can solve the trouble yourself Small problems are often easily Solved and this can save you the trouble of sending your unit off for repair Initialising DVD Deck Only Malfunction occurs on the unit Press 0 1 to turn off the unit press and hold I then press for two seconds or more General No power is supplied to the unit e The AC power plug is disconnected from the mains outlet Connect the AC power plug to the mains outlet securely pg 17 The remote control does not work properly Remove the batteries wait for 5 minutes or more then load the butteries again e The setting of the remote control code is inappropriate Set the same remote control code 1 2 3 or 4 on both the unit and the remote control lt pg 71 e The batteries are discharged Replace the dead batteries with new ones Dubbing from the external equipment is not possible e The source another video recorder camcorder has not been properly connected Confirm that the source is properly connected
192. pg 32 8 Select this to switch picture source type gt pg 33 3 Current status area for the selected item Select this for Programme Playback gt pg 33 11 Select this for Random Playback pg 33 1 Select this to control the switching interval of the slide show gt pg 33 NOTE Although examples of the on screen bar are provided here only for 3 types of discs the on screen bar will be displayed for whichever disc indicated in the left column Basic Operation On The On screen Bar Example When selecting Picture Control function of DVD During playback or while stopped 1 Press ON SCREEN twice to access the on screen bar The item currently selected is highlighted and pointed by W TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO OI e E3 2 Press lt D to select then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 DVD 3D ON CINEMA AUTO gt asco Ow e Es 3 Press AV to select the desired option then press ENTER TITLE 99 CHAPTER 99 EACH 0 00 3D ON CINEMA AUTO DVD E 9 tien un NORMAL CINEMA To clear the on screen bar Press ON SCREEN NOTE See the corresponding pages for details on each menu item Repeat Playback DVD DVD Audio RAM VIDEO cD You can repea
193. points are not permitted MARK es P gt 14 September 2004 18 11 Filename DX7S 06DVD Operation fm DX7S 00 book Page 28 Tuesday September 14 2004 6 11 PM 28 EN BASIC OPERATIONS ON DVD DECK CABLE SAT e y DVD 1 2 3 0 9 NOE 7 9 CIAOO ENTER ENNET GNH ava MENU CJ RETURN PREVIOUS e 3 NEXT eee 1 lt REMAIN O QO DISPLAY SEL UE AUDIO SUBTITLE ANGLE Checking The Time Information E kd E31 You can check time information of a disc on the front display panel and the TV screen Each press of DISPLAY changes the display as follows DVD RAM DVD R DVD RW During recording Clock time front display panel only Current title elapsed time Disc remaining time back to the beginning only discs before finalising e Clock time is displayed only when a recordable disc is recorded During playback Each title elapsed time Current title elapsed time Disc remaining time back to the beginning only discs before finalising In stop mode or during playback e It is possible to check disc remaining time according to recording modes also by pressing REMAIN In FR mode it is possible to set recording time in detail While the recording mode and the disc remaining time are displayed by pressing REMAIN press AY to selec
194. procedure shows how to set MENU LANGUAGE as an example 1 Press DVD so that the DVD lamp lights up on the unit 2 Press SET UP to access the Main Menu screen Press lt D to select DVD VIDEO SET UP then press V 4 Press lt D to select LANGUAGE SET then press eon osese 5 ENTER www maus Press AV to select MENU coro EE LANGUAGE then press ENTER 6 Press AV to select your cp SET MH Lag REN EDS TER desired language then press ENTER e See Language Code List gt pg 90 7 Press SET UP to complete the setting NOTE When the selected language is not available on the disc the disc s default menu language is played back Tuesday 14 September 2004 me J d lan Filename DX7S 05Name fm DX7S 00 book Page 22 Tuesday September 14 2004 6 11 PM 22 gy INITIAL SETTINGS Monitor Set You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide screen TVs e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV Press DVD so that the DVD lamp lights up on the unit 2 Press SET UP to access the Main Menu screen e You cannot set the monitor ty
195. r move the arrow to the desired index and press MEMO The number disappears and the unit re numbers the other programmes automatically e When you want to cancel the order press CANCEL X 4 Press lt I gt to select BEGINNING then press ENTER e To resume playback from the point where playback was previously stopped press lt to select RESUME then press ENTER e To repeat playback of a selected title press lt gt to select REPEAT then press ENTER 5 Press M to pause playback e To resume normal playback press 6 Press stop playback PRESS NAVIGATION TOEXIT ENTER EXIT lt SELECT NAVIGATION gt ORIGINAL 25 12 03 THU SP 1000 1015 PR 380 WORLD IHOBEY SELECT WITH THEN PRESS ENTER SELECT HOW TO PLAY BACK sse PRESS NAVIGATION TO EXIT AUIGATOL as ENTER lt exit lt 5 14 September 2004 18 11 DVD DVD Audio RAM Ios ile e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck e Load a DVD disc to modify ATTENTION e t is not possible to modify discs recorded DVD units from other manufacturers e You cannot perform timer recording during editing the index by pressing EDIT Press EDIT to clear the editing screen before performing timer recording Modify
196. ramme Recording mode when the satellite receiver s power is on the unit will not start Automatic Satellite Programme Recording even though blinks on the front display panel When the satellite receiver shuts off once and is turned back on again the unit starts recording e You can also record a programme from your cable system in the same way if the system has a timer e Just Clock gt pg 81 does not work when the Automatic Satellite Programme Recording mode is engaged e ep Filename DX7S_10Navigation fm 5 DX7S 00 book Page 53 Tuesday September 14 2004 6 11 PM Library Database Navigation DVD DVD 0 E3 Ed EJ The Library Database Navigation enables you to search and select the desired titles recorded on the HDD deck and the DVD deck very easily You can record up to 99 titles on a disc Each time a title is recorded the information of the title is registered for the Library Database Navigation automatically So you can confirm the information of the titles recorded with the Library Database Navigation screen And you can also select one of the titles recorded using the Library Database Navigation The following screen appears as the Library Database Navigation screen when you press NAVIGATION You can move the arrow to select the desired position on the screen by pressing AV lt the remote control NAVIGATION gt ORIGINAL 0025 FISH WORLD 25 12
197. rary recording The temporary recording for Live Memory is cancelled in the following cases and will start all over again when it is to resume e When the power is turned off e When the system is powered again after a power failure was occurred e When normal recording timer recording Live Memory Recording or Automatic Satellite Programme Recording pg 52 is performed e When the LIVE MEMORY setting is changed gt pg 76 e When tuner channel setting is performed gt pg 78 e When dubbing is performed by pressing DUBBING gt pg 60 e When DV is selected by pressing PR gt pg 64 Press NAVIGATION to display Library Database Navigation menu then choose a programme to play back gt pg 53 ON SCREEN Live Memory Playback status can be checked by pressing ON SCREEN to display the bar meter on the superimpose display The current status is superimposed on the TV screen lt pg 15 When using Live Memory playback NOTES e Live Memory Playback could be performed approximately 30 seconds after recording has started e Although high speed search up to approximately 30 seconds before the current recording point is possible during Live Memory Playback once the current recording point is reached the unit resumes normal playback and maintains a delay of approximately 30 seconds so that recording and playback can continue
198. re 2 Press AUDIO or 41 to select contained your desired audio language sound e Each time you press AUDIO or lt gt the audio language sound changes e To clear the Audio Language Sound selection display press ENTER NOTES e When O appears on the TV screen no audio language is recorded e When the audio language won t be changed with the procedure above change the audio on a disc menu displayed by pressing MENU e Pressing AUDIO to select the audio language sound is only possible during playback It is not possible to select by pressing AUDIO in stop mode However you can select the desired audio language sound from the setup menu while in stop mode Audio Channel Selection Ed Ed Ei When watching bilingual programmes or playing discs on which you recorded bilingual or stereo programmes you can choose the desired audio channel e When SUPERIMPOSE is set to AUTO you can confirm on the TV screen the audio channel you have chosen gt pg 77 e Each time you press AUDIO the audio channel changes Dank TRACK On Screen Display USE For main and sub audio of bilingual OD1 0b programme OX For main audio of bilingual programme OD Tp For sub audio of bilingual programme For stereo discs OX b For audio of left channel For audio of right channel NOTE It is not possible for DVD R DVD RW Video mode disc playback to swit
199. red all the stored stations and their Guide Programme numbers remain in the unit s memory and the unit will not perform Auto Set Up again The unit only performs Auto Clock Set when the unit is turned on If you have moved to a different area perform each setting as required e Tuner setting gt pg 78 e Clock setting gt pg 81 If a new station starts broadcasting in your area perform tuner setting gt pg 78 NOTES e n areas where no TV station transmits a PDC Programme Delivery Control signal the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set e If there is a power cut or if you press 071 or SET UP while Auto Set Up is in progress Auto Set Up will be interrupted be sure to turn off the unit power once and try again from step 1 e Auto Clock Set may not function properly depending on the reception condition e If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up the TV system setting for those channels may be incorrect Select the appropriate TV system for those channels gt pg 80 INFORMATION After Auto Set Up is completed perform Monitor Set on page 22 Tuesday 14 September 2004 me Filename DX7S 05Name fm DX7S 00 book Page 19 Tuesday September 14 2004 6 11 PM Preset Download Auto Channel Set by Downloading from TV Auto Clock Set Auto
200. s ENTER 5 Press AV to select SCENE then press ENTER 6 Press AV to select MODIFY then press ENTER 7 Press AV to select a scene to modify then press ENTER 8 Perform steps 5 10 in Create Play List lt pg 57 14 September 2004 18 11 1 Perform steps 1 4 in Edit Scenes gt pg 57 before continuing 2 Press AV lt D to select SEL TITLE then press ENTER 3 Perform steps 4 10 in Create Play List gt pg 57 Move Scenes 1 Perform steps 1 4 of Edit Scenes gt pg 57 before continuing 2 Press AV lt D to select MOVE then press ENTER 3 Press AV to select a scene to move then press ENTER 4 Press AV to select another scene to which the scene is to be moved then press ENTER e To cancel the move press AV lt gt to select RETRY then press ENTER 5 Perform steps 8 10 in Create Play List gt pg 57 Delete Scenes 1 Perform steps 1 4 of Create Play List gt pg 57 before continuing 2 Press AV lt D to select DELETE then press ENTER Press AV to select a scene to delete then press ENTER 4 Perform steps 8 10 in Create Play List gt pg 57 Play Back Play List 1 Press NAVIGATION The Library Database Navigation screen appears 2 Press AV lt D to select PLAY LIST then press ENTER Press AV lt D to select the index small pictures of the desired play list the
201. s AV to select CH then SSS press ENTER Press v to input the channel number you want to 150201202 store e To enter the registered station name gt pg 93 press AV to select ID then press ENTER Press AV e For fine tuning adjustment press AV to select FINE then press ENTER Press AY to perform fine tuning e When storing a channel that sends scrambled broadcasts press AY to select DECODER then press ENTER Press AVY to set DECODER to ON OFF is the default setting e When L 2 SELECT is set to VIDEO S VIDEO SAT VIDEO or SAT S VIDEO the DECODER setting cannot be changed gt pg 67 11 Press ENTER to enter new channel information The Confirmation screen appears 12 Press SET UP to close the Confirmation screen e To change positions see Change Station Channel Position pg 80 e you wish to set station names other than the ones registered in your unit see Set Stations B gt pg 80 INITIAL SET UP gt MANUAL CH SET C E RETURN ATTENTION Guide Programme numbers are not set when channels are stored manually gt pg 78 SHOWVIEW System Setup gd Sm Filename DX7S_12Subsidiary fm DX7S 00 book Page 80 Tuesday September 14 2004 6 11 PM is 80 En SUBSIDIARY SETTINGS Delete A Channel e Masterpage Left Set Stations A 1 Perform steps 1
202. s ON When the equipment is installed in a cabinet or a shelf make sure that it has sufficient space on all sides to allow for ventilation 10 cm or more on both sides on top and at the rear When discarding batteries environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly Failure to heed the following precautions may result in damage to the unit remote control or disc 1 DO NOT place the unit inan environment prone to extreme temperatures or humidity in direct sunlight dusty environment inan environment where strong magnetic fields are generated ona surface that is unstable or subject to vibration 2 DO NOT block the unit s ventilation openings or holes If the ventilation openings or holes are blocked by a newspaper or cloth etc the heat may not be able to get out 3 DO NOT place heavy objects on the unit or remote control 4 DO NOT place anything which might spill on top of the unit or remote control If water or liquid is allowed to enter this equipment fire or electric shock may be caused 5 DO NOT expose the apparatus to dripping or splashing 6 DO NOT use this equipment in a bathroom or places with water Also DO NOT place any containers filled with water or liquids such as cosmetics or medicines flower vases potted plants cups etc on top of this unit 7 DO NOT place any naked flam
203. s aio i tent 22 Play List A E AS 56 Playback Control PBC 29 Programme Playback 33 Progressive scan 1 00 84 Q Quick Rewind A Little 222 45 R Random Playback 33 Receiving Stereo And Bilingual Programmes 37 39 47 Recordable Playable Discs 5 Recording Medium And Format 7 Recording 35 38 Region Numbet 6 Register etude eee h m o EE e aas 58 Relief Recording 50 Repeat Playback 31 Res me Function 27 5 Select The Switching Interval Of The Slide Show 33 Selection Of The Audio Channel To Be Recorded On A DISC oce e ur e ne edad 37 39 Setting The Progressive Mode 33 Simulated Surround Effect 32 Skip Searcli eit 27 40 Slow Motion 2 2 4 44 44 27 40 45 Soundtrack Selection 45 Still Picture Frame By Frame Playback 27 40 45 Subtitle Sel
204. satellite receiver to the L 2 IN DECODER connector be sure not to engage the Automatic Satellite Programme Recording mode otherwise the unit will start recording when the connected appliance s power is turned on e Automatic Satellite Programme Recording and timer recording cannot be done at the same time DV HDD DVD SELECT REC MODE CABLE SAT TV HDD 0000 REC MODE SATO 14 September 2004 18 11 Masterpage Left e Make sure the satellite receiver is connected to the unit s L 2 IN DECODER connector e Programme the timer on the satellite receiver e Slide the TV CABLE SAT DVD switch to DVD 1 Press HDD on the remote to choose the recording deck You can also press DV HDD DVD SELECT on the unit repeatedly to select the recording deck 2 Set L 2 SELECT to SAT VIDEO or SAT S VIDEO pg 67 e Also refer to IMPORTANT on page 73 3 Press REC MODE repeatedly to set the recording mode 4 Press and hold SATO for about 2 seconds to engage the Automatic Satellite Programme Recording mode and SAT appear on the front display panel NOTES e To disengage the Automatic Satellite Programme Recording mode press SATO e If the units power is off it is not possible to eng
205. sible not only to start playback of a programme currently being recorded but also to watch another programme previously recorded DVD RW VR mode e Recording and erasing can be performed as many times as possible on a disc e Editing can be performed after recording such as deleting unwanted parts DVD RW Video mode e Can be played back on other DVD players e New recording can be performed by erasing all the data on a disc once played back DVD R e Can be played back on other DVD players e Suitable when keeping a recorded disc for a long time File Structure Of Discs DVD VIDEO Typically DVD VIDEO discs are made up of larger units called titles Each title has a number title number that can be used to select desired titles Titles are further divided into units called chapters Each chapter has a number chapter number that can also be used to select desired chapters Note that some discs are not divided into titles and chapters When you record a programme on a DVD RAM RW VR mode disc A single recording session results in a single title a single chapter However chapter marks are automatically inserted when recording is paused or audio changes from monaural to stereo due to commercial breaks etc It is also possible to insert chapter marks at desired locations during playback gt pg 27 When you record a programme on a DVD R RW Video mode disc A single recording session results in a single t
206. sing on the unit also works the same way 10 Press 4 to select Lae then press ENTER Then press W The DV equipment stops 11 Press lt I gt to select en mes then press ENTER 12 Press twice on the remote control to stop dubbing e Both the unit and the external DV equipment stop dubbing NOTES e Dubbing copyright guarded programmes is not possible e Original DV information such as the recording date and time are not recorded e The superimposed indication during the operation or dubbing is not recorded e If the dubbing is paused while the channel is set to DV you cannot switch channels When you dub from DV equipment other than a camcorder Perform step 1 to 4 Locate the point from where you want to start dubbing then stop on the DV equipment e If you pause the DV equipment in this step a few second s still picture will be recorded at the beginning of the recorded programme 3 Set the input mode to DV INPUT on the DV equipment e f you select an input mode other than DV INPUT unwanted pictures may be recorded at the beginning of the recorded programme 4 Perform step 9 to 12 Sil To skip unwanted part of the source picture Press ENTER to stop both equipment then press lt gt to select tE 22 9 Locate the point where you want to restart dubbing by pressing P gt gt or lt lt then press Press lt gt to select m then press
207. slightly before the actual point from where you wish to start dubbing Press M to pause playback 7 Press A DUB to engage the audio dubbing mode e Your unit enters the Audio Dubbing Pause mode e To perform Audio Dubbing with audio mixing press AUDIO to select L gt R at this point When using the DV deck as the recording deck also make sure that AUDIO is set to SOUND gt pg 76 Audio Dubbing with audio mixing is not possible if you are using a monaural audio component or if you don t have an audio mixer 8 Engage the audio device s playback then press to start the tape in the unit Audio dubbing starts at this point e To stop dubbing temporarily press Il Press to resume dubbing 9 Press on the unit then stop playback on the audio device to end the audio dubbing NOTES e Once the Audio Dubbing starts you cannot use the other deck e When monitoring the audio dubbed sound on the DV deck set AUDIO to SOUND gt pg 76 e Audio Dubbing is also possible with the L 1 IN OUT or L 2 IN DECODER connector on the rear panel When using these 21 pin SCART connectors be sure to select the correct input mode L 1 or L 2 in step 4 e When playing back an audio dubbed Mini DV tape on the DV deck set AUDIO to SOUND gt pg 76 e Audio dubbing is not possible using the DV IN OUT connector e Audio dubbing is not possible on a
208. splay panel e The DV progressive scan image will then be outputted from the COMPONENT VIDEO OUT connectors NOTE e Be sure to engage the HDD or DVD deck in stop mode e To disengage the DV Progressive Scan mode perform steps 4 and 5 to switch to OFF gd e Filename DX7S_O8DV Operation fm e DX7S 00 book Page 46 Tuesday September 14 2004 6 11 PM 46 En BASIC OPERATIONS ON DV DECK Basic Recording e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD DV HDD DVD SELECT gt noo 8 Wm PR m RE e MODE CABLE SAT TV DVD DV REC MODE 1 Load a Mini DV cassette with the erase protection switch set to REC e The unit s power comes on automatically and the counter is reset to 0 00 00 2 Press DV HDD DVD SELECT on the unit repeatedly or DV on the remote so that the DV lamp lights up on the unit Press PR or the number keys to select the channel you wish to record 4 Press REC MODE repeatedly to set the recording mode 5 Press on the unit to start recording Or while holding 6 press gt on the remote control e The DV recording lamp lights up on the unit If DIRECT is set to ON the programme
209. ss ENTER 6 Press SET UP to complete the setting The boldface settings below indicate the settings at your purchase FUNCTION ser uP REC PLAY SET DISPLAY SET VIDEO IN OUT MONITOR TYPE 4 318 INPUT VIDEO LA INPUT SCART VIDEO pee x uA Ta SELECT WITH 4 THEN PRESS ENTER PRESS ISET UPI TO EXT L 1 OUTPUT SCART VIDEO SCART S VIDEO SCART RGB COMPONENT SCART VIDEO If a connected appliance s input is compatible only with regular video signals set to SCART VIDEO SCART S VIDEO If a connected appliance s input is compatible with Y C signals set to SCART S VIDEO You can obtain high quality picture For connection be sure to use a 21 pin SCART cable that is compatible with the Y C signal SCART RGB If a connected appliance s input is compatible with RGB signals set to SCART You can obtain a high quality RGB picture es EDITING EN 67 COMPONENT If a connected appliance s input is compatible with Y PB PR signals set to COMPONENT You can obtain a high quality Y PB PR picture Switch the TV to the input that you can watch component video pictures B L 1 INPUT VIDEO S VIDEO VIDEO If a connected appliance s output is compatible only with regular video signals set to VIDEO S VIDEO If a connected appliance s output is compatible with Y C signals
210. ss ENTER Repeat the above procedure to locate another point to mark 4 Press gt and press 44 or gt gt to select one chapter you want to delete then press I 5 Press lt gt to select ERASE then press ENTER e The selected chapter is deleted e To undo the deletion press lt gt to select RETRY then press ENTER Repeat the above procedure to locate another point to delete Press EDIT to return to the normal screen NOTE There may be a discrepancy of several seconds between the Scene you intend to edit and the scene which is actually edited EDITING gt MODIFY CHAPTER CHAPTER 03 10 01 00 00 00 02 00 05 30 03 00 07 00 04 00 30 00 Jos 14 September 2004 18 11 e Masterpage Left Modify Play List Information DVD DVD DVD Audio RAM Dru VIDEOR SVCD CD e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD e Press HDD or DVD to choose the corresponding deck e Load a DVD disc to modify ATTENTION e It is not possible to modify discs recorded on DVD units from other manufacturers e You cannot perform timer recording during editing the index by pressing EDIT Press EDIT to clear the editing screen before performing timer recording CABLE SAT Tv DVD HDD DVD CANCEL MEMO EDIT ENTER NAVIGATION gt gt i
211. t gt J 7 Scan For Title From Library 1 Press NAVIGATION The Library Database Navigation screen appears 2 Press AV lt 1 to select the appropriate sort button to sort TEES the information then press ORIGINAL PLAYLIST ENTER Ey DATE PRESS NAVIGATION Sort by date pe DISC NGO m ENTER Sort by disc number sur CATEGORY Sort by category Sort by name e DATE and DISC No are available for the DVD deck only Press AV lt D to select the desired title then press ENTER e Playback begins automatically after the selected title is located NOTE If a disc registered in the library is recorded or modified on DVD units from other manufacturers it may become impossible to operate properly Register Disc When a disc that is not registered in the library is loaded a message appears confirming if the disc should be registered If registering perform the following procedure 1 Press lt I gt to select REGISTER then press ENTER to confirm the registration 2 Press NAVIGATION to return to the normal screen NOTES e t is not possible to register discs formatted on devices other than JVC s DVD recorders e t is not possible to register discs recorded on devices other than JVC s DVD recorders e It is not possible to register discs when SAVE AS LIBRARY is set to OFF pg 76
212. t FR then press lt D to select the desired recording time gt pg 37 e t is not possible to switch the recording mode during playback or while recording W Video CD SVCD Audio CD During playback Current track elapsed time Current track remaining time Total elapsed time Total remaining time back to the beginning In stop mode 0 00 Playback time of track 1 0 00 Total length of a disc gt back to the beginning NOTE When a PBC compatible Video CD SVCD disc is loaded deactivate the function gt pg 29 Masterpage Left Angle Selection e DVD m rm kd E31 E2 E32 E EZ You can enjoy a variety of scene angles if a DVD VIDEO disc contains multi angle parts where the same scene was shot from different angles If the disc contains multi angle parts appears on the TV screen at the beginning of the multi angle part 1 Press ANGLE during playback The angle selection display appears on the TV Screen 2 Press ANGLE or lt I gt to select your desired angle e Each time you press ANGLE or lt the angle changes e When appears on the TV screen the current scene is not recorded from multiple angles In addition some discs prohibit angle selection e To clear the angle selection display press ENTER In addition the angle selection display disappears automatically if no operation is done for 10 seconds S
213. t is possible to delete titles gt pg 55 e It is impossible to overwrite recorded areas of DVD R discs e Available recording capacity does not increase even if a recorded title is deleted from a DVD R disc e It is impossible to record or edit DVD R RW discs recorded on other devices even if they have not been finalised After finalising For DVD R RW Video mode discs e Video and audio that have been recorded by then are recorded in conformity to the DVD Video standard enabling you to play back the discs as DVD VIDEO discs e Although DVD R RW discs finalised on this unit become playable on DVD players compatible with DVD R RW discs some discs still may not play for which JVC cannot take responsibility Marked points marked before finalising will be deleted and titles will be divided automatically into chapters approximately every 5 minutes gt pg 27 e Depending on the DVD players and DVD R RW discs used and on the conditions of recording it may not be possible to play back the discs In this case play back the discs on this unit e Additional recordings become impossible Masterpage Right SUBSIDIARY SETTINGS y 83 Finalise A DVD R RW Disc 1 Perform steps 1 to 4 of Format A DVD RAM Disc gt pg 82 before continuing 2 Press AV lt D to select FINALISE then press ENTER e For DVD R RW Video mode discs the background selection screen will appear Press AV lt gt to sele
214. t playback as you like according to the type of disc 1 Press ON SCREEN twice to access the on screen bar 2 Press lt D to select then press ENTER The pop up window appears under the selected item TITLE 99 CHAPTER 99 EACH 0 00 DVD 30 0 CINEMA AUTO am c asco 9 3 Press AV repeatedly to select the desired Repeat mode then press ENTER e 14 September 2004 18 11 Filename DX7S_O6DVD Operation fm DX7S 00 book Page 31 Tuesday September 14 2004 6 11 PM DVD RAM RW R OFF Repeat playback is not performed ALL REPEAT The whole disc is played back repeatedly TITLE REPEAT The current title is played back repeatedly DVD VIDEO OFF Repeat playback is not performed TITLE REPEAT The current title is played back repeatedly CHAPTER REPEAT The current chapter is played back repeatedly Audio CD Video CD SVCD JPEG MP3 OFF Repeat playback is not performed ALL REPEAT The whole disc is played back repeatedly GROUP REPEAT The current group is played back repeatedly TRACK REPEAT The current track is played back repeatedly GROUP REPEAT cannot be selected for Audio CD and Video CD SVCD discs TRACK REPEAT cannot be selected for JPEG discs To clear the on screen bar Press ON SCREEN To cancel Repeat Playback Repeat the above procedure from step 1 select OFF in step 3 then press ENTER NOTES e Repeat Play
215. t to turn off the unit 3 Press gt on the unit for over 5 seconds while the unit is turned off The code currently set appears on the front display panel 4 Press on the remote control to change the unit s code The code currently set on the remote control blinks on the front display panel for approximately 5 seconds and is applied to the unit NOTE When POWER SAVE is set to gt pg 77 it is not possible to change the remote code REMOTE CONTROL en 71 CABLE SAT TV AV VIDEO Wak cwm 071 0 9 TV 4 e PR 91510 51 C ccc aum a 5 ENTER et Ce gt 4 3 2 SET UP TV Multi Brand Remote Control Your remote control can operate the basic functions of your TV set In addition to JVC TVs other manufacturer s TVs can also be controlled e Turn off the TV using its remote control e Slide the TV CABLE SAT DVD switch to TV IMPORTANT Although the provided remote control unit is compatible with JVC televisions as well as many other models it may not work with your TV or in some instances may have limited function capability e Keep pressing SET UP down during step 1 1 Enter your TV s brand code using the number keys then press ENTER 2 Press
216. t where you want the deletion to begin then od EDITING gt ORIGINAL DELETE SCENE 21 12 03 SUN 1830 2000 PR 12 3 RALLY CAR OTHERS SP press ENTER with the arrow 0 05 15 on IN The edit in time is fixed and the elapsed playing time HE starts counting again aoe ore 5 SELECT IMAGE TO REPLAGE WITH 7 ONREMOTE Find the point where you want emis EM the deletion to end then press ENTER with the arrow on OUT The edit out time is fixed Press 44 gt PP lt lt Il to find the edit in and edit out points 7 Press lt D to select PREVIEW then press ENTER to preview the edited title 8 Press lt D to select then press ENTER e If you do not want to delete the scene press EDIT or RETURN To modify the points Press EDIT or RETURN 2 Repeat steps 4 8 as necessary 9 Press lt gt to select DELETE then press ENTER The selected scene is deleted e To cancel the deletion press lt gt to select CANCEL then press ENTER 1 Press EDIT to return the normal screen NOTES e There may be a discrepancy of several seconds between the Scene you intend to edit and the scene which is actually edited e Available recording capacity may not match the deleted part after deletion Ei Sp Filename DX7S_10Navigation fm gt DX7S 00 book Page 56 Tuesday September 14 2004 6 11 PM 56 en NAVIGATI
217. tellite Controller and perform the procedure described in Satellite Receiver Control Setting HDD amp DVD Deck Only gt pg 23 e Repeat steps 5 7 as necessary 8 Press SET UP to complete the setting INTIAL SETUP gt GUIDE PROG SET UDE PR A Gl 06 x RETURN SETUP ENTER CARS SELECT WITH 4 THEN PRESS ENTER BAT 9 PRESS ISET UP TO EXIT Guide Programme Number Guide Programme GUIDE PROG number refers to the assigned TV station numbers according to broadcast area for the SHOWVIEW timer recording The Guide Programme Numbers can be found in most TV listings Masterpage Left Toner Set e Your unit needs to memorise all necessary stations in channel positions in order to record TV programmes Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR buttons without going through any vacant channels e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD ENTER IMPORTANT Perform the following steps only if Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download gt pg 18 19 you have moved to a different area or if a new station starts broadcasting in your area Auto Channe
218. this unit s S VIDEO and AUDIO input connectors on the front panel Then set the unit s input mode to F 1 in step 3 and set F 1 INPUT to S VIDEO gt pg 68 e Tuesday 14 September 2004 me D an Filename DX7S 11Editing fm DX7S 00 book Page 67 Tuesday September 14 2004 6 11 PM Output Input Set e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD ENTER SET UP L 1 Output And L 1 Input Setting The L 1 IN OUT connector accepts and delivers either a composite signal regular video signal or a Y C signal a signal in which the luminance and chrominance signals are separated Set L 1 OUTPUT and L 1 INPUT to the appropriate mode depending on the type of appliance connected to the unit s L 1 IN OUT connector 1 Press SET UP to access the Main Menu screen 2 Press lt gt to select FUNCTION SET UP then press V 3 Press lt gt to select VIDEO IN OUT then press V 4 Press AV to select L 1 OUTPUT or L 1 INPUT then press ENTER EEA FUNCTION ser uP RECIPLAY SET DISPLAY SET VIDEO IN OUT SETUP a ENTER SELECT WITH 4 THEN PRESS ENTER e PRESS SET UP TO EXIT EXIT SELECT 5 Press AV to select the appropriate setting then pre
219. tor on your unit e VPS PDC recording is also possible via the L 1 IN OUT connector How to check if the station being received transmits a VPS PDC signal 1 Hold down DISPLAY for about 5 seconds VPS PDC appears and blinks on the front display panel If a VPS PDC signal is detected from the station VPS PDC will stop blinking If no VPS PDC signal is detected from the station VPS PDC will blink at a slower rate 2 Press DISPLAY again to return to normal display Ei e e Filename DX7S 09 Recording fm DX7S 00 book Page 50 Tuesday September 14 2004 6 11 PM 50 en MER RECORDING ON HDD DVD DECK J Manual Timer Programming You can programme this unit to timer record as many as 16 programmes If you do not know the SHOWVIEW number for the programme you wish to record use the following procedure to set your unit to timer record the programme Make sure that the unit s built in clock is set properly e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD CABLE SAT TV DVD PROGRAMME 1 Load a recordable disc if recording to DVD 2 Press PROGRAMME to access the programme top screen Press AV lt gt to select CALENDAR PR then press ENTER e When PROGRAMME FULL DELETE UNWAN
220. ts then press MARK After selecting all indexes you want to dub press ENTER e You can select up to 8 original recordings and or play lists e The recordable time of the disc is displayed on the bar meter For details refer to About Disc Remaining Display gt pg 63 6 Press lt D to select EXECUTE or AUTO PWR OFF then press ENTER The dubbing screen appears for 5 seconds To display the dubbing screen again press ON SCREEN EXECUTE Select this to continue the dubbing operations AUTO PWR OFF Select this to continue the dubbing operations and turn off the unit after dubbing While the dubbing screen is displayed you can also select this mode by pressing DUBBING CANCEL Select this to cancel dubbing operation NOTES e Play lists are dubbed as programmes e In Video mode if the selected play list includes the scenes recorded in the different transfer rate the dubbing is performed in the highest transfer rate of the scenes in the selected play list e During dubbing it is not possible to play back on HDD or DVD or to set timer programming Just Dubbing From HDD To DVD By using Just Dubbing function when dubbing all selected original recordings and or play lists the unit automatically sets the appropriate recording mode depending on the combination of the total time of the selected recordings and or play lists to be dubbed and the available disc space 1 Load a recordable
221. u press any button on the unit or remote control while downloading is in progress it will be interrupted NOTES e For details refer to the instruction manual of your TV e In the area where no TV station transmits PDC Programme Delivery Control signal the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set e If there is a power cut or if you press 071 or SET UP while downloading or set up is in progress it will be interrupted be sure to turn off the unit power once and try again from the beginning e Auto Clock Set may not function properly depending on the reception condition e On this unit the characters available for station names ID are A Z 0 9 and space Some names of downloaded stations may differ from those of your TV gt pg 80 Ms INITIAL SET UP gt AUTO CH SET D 1 3 INITIAL SET UP gt auto SET AUTO SET PLEASE WAIT CANCEL SETUP ENTER As SELECT WITH 4 THEN PRESS ENTER S PRESS SET UP TO EXIT After Preset Download is completed perform Monitor Set on page 22 Tuesday 14 September 2004 B lan Filename DX7S 05Name fm DX7S 00 book Page 20 Tuesday September 14 2004 6 11 PM 20 en INITIAL SETTINGS Results Of Auto Set Up Preset Download Appearing On The Front Display Panel If both Auto Channel Set and Auto Clock Set have been per
222. ubtitle Selection m 4178p When 3 scene angles are contained DVD DVD C RAM uus SVCD CD Some DVD VIDEO discs contain more than one subtitle language from among which you can choose the desired subtitle language QY appears on the TV screen at the beginning of the part where more than one subtitle language are recorded 1 Press SUBTITLE during playback The subtitle selection display appears on the TV screen e Each time you press SUBTITLE the subtitle display is switched on and off 2 Press lt I gt to select your desired language e To clear the subtitle selection display press ENTER NOTES e When Q appears on the TV screen no subtitle language is recorded e When the subtitle language won t be changed with the procedure above change the subtitle on a disc menu displayed by pressing MENU 4173 ENGLISH When 3 subtitle languages are contained gil v i Filename DX7S 06DVD Operation fm DX7S 00 book Page 29 Tuesday September 14 2004 6 11 PM Audio Language Sound Selection a L2 EZ Some DVD VIDEO discs contain the multiple audio language or sound You can select the desired audio language or sound For some Video CD SVCD discs you can switch the audio channel to choose Karaoke either with or without the vocal Press AUDIO during playback The Audio Language Sound Selection display appears 418 D ENGLISH When 3 audio languages a
223. uch a case press ENTER The disc will stop Then play back the disc again and try the procedure again from step 1 NOTE If you forget your password enter 8888 in step 3 Ei Filename DX7S_O6DVD Operation fm e DX7S 00 book Page 35 Tuesday September 14 2004 6 11 PM Basic Recording DVD ILI Ed E E31 E3 Ex E EZ e Turn on the unit e Turn on the TV and select the AV mode e Slide the TV CABLE SAT DVD switch to DVD ATTENTION It is not possible to record programmes on a DVD R disc which has already been finalised DV HDD DVD SELECT gt e noo iE PR REC MODE CABLE SAT x DVD O olo DVD 1 2 GIO 0 9 6 o aS SIS SoooSo ENTER re 40 e 2 Ge OO REC MODE Load a recordable disc e For details refer to Placing A Disc gt pg 8 2 Press DV HDD DVD SELECT on the unit repeatedly or DVD on the remote so that the DVD lamp lights up on the unit Press PR or the number keys to select the channel you wish to record 4 Press REC MODE repeatedly to select the recording mode then press ENTER e Each time you press REC MODE the recording mode changes as follows XP
224. use recording only when recording the channels of external sources L 1 L 2 F 1 and DV While holding press I on the remote To resume recording while holding press on the remote No operation can be made with the buttons on the unit Recording Mode MPEG2 format is used as recording format As a guide for picture quality the bps unit is used to represent how much data can be recorded per second The larger this value is the better the picture quality becomes but more capacity is required for the recording Select XP or SP for programmes where quick movement occurs Such as sports programmes and LP or EP for talk shows etc with relatively less movement Recording Recording amount Maximum recording mode approx time approx XP 10 Mbps 57 hours SP 5 Mbps 113 hours LP 2 5 Mbps 225 hours EP 1 6 Mbps 338 hours FR60 FR360 The amount varies 57 338 hours gt pg 37 depending on the selected 480 didi 473 hours e For details on FR mode refer to Free Rate Function gt pg 37 NOTE The maximum recording time stated in the above table are the approximate time under unused condition Tuesday 14 September 2004 me e Filename DX7S 07HDD Operation fm e DX7S 00 book Page 39 Tuesday September 14 2004 6 11 PM Recording Features e Turn on the unit e Turn on the TV and select the AV mode e Slide th
225. when Simulated Surround Effect is activated gt pg 32 e The effect of NORMAL and WIDE RANGE may be different depending on discs IM OUTPUT LEVEL STANDARD LOW You can lower the output level of analogue audio to accommodate the unit to the connected A V equipment STANDARD Normally select this setting LOW The output level of analogue audio is lowered fe 14 September 2004 18 11 Filename DX7S_12Subsidiary fm DX7S 00 book Page 76 Tuesday September 14 2004 6 11 PM 76 EN SUBSIDIARY SETTINGS DISC PLAY SET UP RESUME OFF ON DISC RESUME When this function is set to ON or DISC RESUME you can use the resume function gt pg 27 OFF You cannot use the resume function ON You can start playback from the resume point of the placed disc DISC RESUME The unit retains a memory of the resume points of the last 30 discs played back even though they have been ejected NOTE DISC RESUME setting works on DVD VIDEO VCD SVCD and already finalised DVD R DVD RW video mode discs For other types of discs the function under ON setting will be applied even if RESUME is set to DISC RESUME HDD SET UP E LIVE MEMORY OFF 30 MIN 1 HR 3 HR When this function is set to 30 MIN 1 HR or 3 HR you can apply the selected time length to Temporary recording for Live Memory gt pg 41 DVD SET UP SAVE AS LIBRARY
226. yback time o E feo lt feo fo INDEX cu 15 When recording P 1 00 1200 1 00 1135 12 FR360 11 33 STEREO Live Memory Recording point 2 Live Memory Recording mode When pressing REC MODE Appears for eight seconds HDD capacity graph Current recording speed Remaining HDD time for each recording speed Recording speed feo When pressing 6 during recording 1 1 2 30 Recording time for Instant Timer Recording ITR mode Tuesday 14 September 2004 me J d Filename DX7S_O5Name fm DX7S 00 book Page 16 Tuesday September 14 2004 6 11 PM 16 INDEX On Screen Display DV Dubbing On Screen Display DV deck When capturing images from the external DV equipment i e 7 rw DV 00 00 00 00 00 00 00 00 ae 7 JVC GR DV3500 1 Recording speed HDD capacity graph HDD time counter Recording time scale Remote control mode Connected DV equipment mode Connected DV equipment model information Input channel 10 Sound mode 1 2 3 4 5 HDD mode 6 1 8 3 1 Sound input bit rate ndicates the
227. yman Islands CF Central African Republic GI Gibraltar KZ Kazakhstan CG Congo GL Greenland LA Lao People s Democratic Republic CH Switzerland GM Gambia LB Lebanon Cl C te d Ivoire e 91Tuesday 14 September 2004 18 11 gil Filename DX7S_12Subsidiary fm DX7S 00 book Page 92 Tuesday September 14 2004 6 11 PM 92 EN APPENDIX Masterpage Left e LC Saint Lucia NU Niue SZ Swaziland LI Liechtenstein NZ New Zealand TC Turks and Caicos Islands LK Sri Lanka OM Oman TD Chad LR Liberia PA Panama TF French Southern Territories LS Lesotho PE Peru TG Togo LT Lithuania PF French Polynesia TH Thailand LU Luxembourg PG Papua New Guinea TJ Tajikistan LV Latvia PH Philippines TK Tokelau LY Libyan Arab Jamahiriya PK Pakistan TM Turkmenistan MA Morocco PL Poland TN Tunisia MC Monaco PM Saint Pierre and Miquelon TO Tonga MD Moldova Republic of PN Pitcairn TP East Timor MG Madagascar PR Puerto Rico TR Turkey MH Marshall Islands PT Portugal TT Trinidad and Tobago ML Mali PW Palau TV Tuvalu MM Myanmar PY Paraguay TW Taiwan MN Mongolia QA Qatar TZ Tanzania United Republic of MO Macau RE R union UA Ukraine MP Northern Mariana Islands RO Romania UG Uganda MQ Martinique RU Russian Federation UM United States Minor Outlying Islands MR Mauritania RW Rwanda US United States
228. you can skip or add channel positions enter station names and perform other operations Refer to pages 79 80 for the procedures e Depending on reception conditions the stations may not be stored in order and the station names may not be stored correctly e For information on scrambled broadcasts refer to When Receiving A Scrambled Broadcast HDD amp DVD Deck Only gt pg 80 IMPORTANT e In certain reception conditions station names may not be stored correctly and Auto Guide Programme Number Set may not work properly When the Guide Programme numbers are not set properly the programme that you do not intended to record will be timer recorded by the SHOWViIEW system of the unit When programming the timer using the SHOWVIEW System be sure to check the desired channel is selected correctly lt pg 48 e Your unit memorises all receivable stations even if reception of some of them is poor You can delete those stations with an unacceptable picture from the list gt pg 80 Delete Channel NOTES e Fine tuning is performed automatically during Auto Channel Set If you want to perform tuning manually refer to Fine Tuning Channels Already Stored gt pg 80 e If you perform Auto Channel Set when the aerial cable is not connected properly SCAN COMPLETED NO SIGNAL appears on the TV screen in step 8 In such a case make sure of the aerial connection and press ENTER Auto Channel Set

JVC DR-DX7S DVD RECORDER , HARD DISC DRIVE RECORDER and MINI DV RECORDER COMBO UNIT

Contents

Download Pdf Manuals

Related Search

Related Contents