Belkin UPS Battery Finder: PRO F5C500 battery (1856CE52C) UPS System
Contents
1. and performance of the software program and documentation is borne by you Should any or all of the product software program documentation or related information goods or services be defective misused unsuitable or cause or give rise to any harm or liability whatsoever you not Belkin or its associates dealers or agents assume the entire liability cost of repair correction or any payment or other remedy whatsoever Furthermore no warranty or guarantee is made regarding the use or results of the product software program documentation or any related information goods or services in terms of correctness accuracy reliability timeliness or otherwise You use and rely on the program at your own risk The following is the only and exclusive warranty and remedy of any kind Belkin does warrant that the program disks are free from physical defects in materials and workmanship under normal use for a period of one 1 year from the date of purchase as evidenced by a copy of the sales receipt Return the defective disk or documentation with your receipt directly to Belkin for a replacement DISCLAIMER Belkin or its associates will in no event be liable i in any amount for lost profits or special incidental punitive or consequential damages or ii for any claim or damage of any nature or under any theory whatsoever in any amount in excess of the purchase price you paid for the product The warranties and remedies here set are exc2. products for your use This User License Agreement Agreement contains the terms and conditions under which limited use of the product is licensed to you PLEASE READ THIS NOTICE CAREFULLY DO NOT OPEN THIS ENVELOPE OR USE ANY OF THE SOFTWARE UNTIL YOU HAVE READ AND AGREED TO THIS AGREEMENT IF YOU OPEN THE ENVELOPE YOU ARE AGREEING TO THE TERMS AND CONDITIONS SET OUT IN THIS AGREEMENT IF YOU DO NOT ACCEPT THESE TERMS AND CONDITIONS YOU MUST RETURN THE ENVELOPE UNOPENED AND WITH THE DISKS INSIDE TO THE PARTY FROM WHOM YOU RECEIVED IT SCOPE OF USE In this Agreement software means all machine readable software programs and associated files in this package all modified versions of and upgrades or improvements to such programs and all copies of such programs and files You a single user opening this envelope You you or your may use the software on a single central processing unit You may not rent it loan it out or lease it nor use it on a multi user system Belkin Components Ltd Unit 13 Gatelodge Close Round Spinney Northampton NN3 8RX e United Kingdom Tel 44 0 1604678300 Fax 44 0 1604678330 Tel 31 0 235698765 e Fax 31 0 235612694 BELKIN COMPONENTS USER LICENSE AGREEMENT LICENSE You have the non exclusive right to use the software You are not permitted to copy modify or transfer the software or documentation You may not decompile disassemble or otherwise reverse enginee
3. the battery cover on the bottom of the unit 4 Put the battery cover back and slide it into position 3 Insert the replacement gently into the UPS Make sure the battery is well connected MAINTENANCE e Normally the life of a battery is 3 5 years But extreme operating conditions and environment may shorten its life span e When the UPS has been unused for some time the battery inside will discharge slightly It is recommended to plug the UPS into a wall outlet to let the battery begin charging automatically e When cleaning the plastic case or front panel use only a soft dry cloth If the case or front panel is very dirty use a neutral non abrasive detergent e Do not use alcohol or ammonia based solutions e When moving the UPS always handle it with care Belkin Components USA 800 223 5546 belkin com STORAGE Storage Conditions Store the UPS covered and upright in a cool dry location with its battery fully charged Before storing charge the UPS for at least four hours Disconnect any cables connected to the computer interface port to avoid unnecessary drainage of the battery Extended Storage During extended storage in environments where the ambient temperature is 5 F to 86 F charge the UPS battery every six months During extended storage in environments where the AY ambient temperature is 86 F to 113 F charge the UPS battery every three A months Note TECHNICAL SPECI
4. FICATIONS F6C350 F6C500 F6C650 MODEL SER SB SER SB SER SB RATED 350VA 500VA 650VA CAPACITY 190W 300W 360W RATED INPUT anani 202 236VAC PHASE FREQUENCY Single Phase 50Hz VOLTAGE Simulated Sine Wave OUTPUT FREQUENCY 50Hz F6C350 F6C500 F6C650 BACKUP TIME Upto 15min Up to 20min Up to 25min BATTERY REGHARGE 4 Hours to 90 TEMPERATURE 0 40 C ENVIRONMENT HUMIDITY 10 90 SAFETY UL 1778 C UL SAFETY REGULATION em FCC CLASS B ews IEEE 62 41 CATEGORY A Dimension 71W x 8 7 x 2 4 H APPEARANGE 2 9 KGS 3 2 KGS 3 2 KGS NET WEIGHT 6 4 LBS 7 LBS TLBS Belkin Components 501 West Walnut St Compton CA 90220 5221 USA Tel 310 898 1100 Fax 310 898 1111 All specifications are subject to change without prior notice SAFETY A CAUTION e Internal battery voltage is 12V DC Used CSB HC1217W for 350VA HC 1221W for 500 650VA e UPS with user replaceable batteries shall contain detailed instruction for battery removal and installation e The unit is intended for installation in a controlled environment temperature controlled indoor area free of conductive contaminants Sealed lead battery Battery must be recycled For Recycling Information Inside the USA Call 800 Re Use Pb 738 7372 aS Outside the USA Call Pb 1 800 244 4415 Pb NONSPILLABLE BELKIN COMPONENTS USER LICENSE AGREEMENT Belkin Components Belkin thanks you for choosing one of our
5. Interface Port Provides RS232 to relay the signal to support DOS Windows and other operating systems Phone Fax Modem DSL or Network Protection Telephone fax modem lines are surge protected and provide complete safety for Internet connection One input and one output allow two devices to be protected i e modem and fax REAR PANEL continued Surge Protection Backup Communication Outlet Protection Outlet Port AC Circuit Inlet Breaker RJ11 RJ45 Site Surge Protector Wiring Fault Site Wiring Fault Indicator The Site Wiring Fault LED will illuminate when one of the following conditions exists 1 Open or high resistance ground 2 Hot and neutral polarity reversal 3 Overloaded neutral circuit AC Input Power Cord Connect to the AC utility AC Input Breaker Circuit Breaker The circuit breaker button will stick out if an overload condition forces the UPS to disconnect itself from utility power If the button sticks out disconnect nonessential equipment Battery Backup Outlets Data sensitive equipment such as a computer monitor and external drive should be powered by these outlets Battery power is automatically provided in case of a power outage Power utility or battery is not supplied to these outlets when the UPS is switched off Do not plug surge protectors power strips or laser printers into the battery backup outlets Surge Only Protected Outlets Equip
6. P73506 UPS manual S series qxd 2 28 01 1 34 PM Page 1 FOR MODELS F6C350 SER SB F6C500 SER SB F6C650 SER SB USER MANUAL INTRODUCTION Have you ever noticed your lights dim or flicker when you turn on your dishwasher or air conditioner This common occurrence is attributed to an under voltage of power also know as a brownout A brownout is a period of insufficient power line voltage It is the most common power problem accounting for 80 of all power disturbances Effects A brownout can deprive a computer of the power it needs to function causing unwanted damage to your computer such as frozen keyboards and hard drive crashes Such problems will cause you to incur computer repairs lost data and downtime Solution A Belkin Uninterruptible Power Supply UPS unit protects against surges spikes swells line noise brownouts and blackouts A surge protector can only protect your computer from over voltages due to irregular power IMPORTANT SAFETY INSTRUCTIONS Thank you for purchasing the Belkin Uninterruptible Power Supply UPS It will provide you with the best protection for your connected equipment Please Save This Manual It includes important instructions for the safe use of this UPS and for obtaining factory service should the proper operation of the UPS come into question Please Save or Recycle the Packaging Materials The UPS shipping materials were designed with great care to pr
7. Recharge the battery for too short is not fully charged at least six hours UPS is overloaded Remove some un critical loads he battery is weak Replace battery at belkin com Charger fault or other reason Contact service personnel Low Battery Battery fault Contact Belkin LED blinks more than 10 seconds Low Battery Charger fault Contact Belkin LED blinks more than 10 seconds with buzzer beeps BATTERY REPLACEMENT EcoPower Service Program In the event that the UPS needs a battery replacement Belkin offers its EcoPower Service Program This program offers a battery replacement on your UPS to ensure it is working properly in protecting your connected devices It also ensures that the battery in the UPS is discarded of properly in an effort to keep our environment clean All participants in the program will receive a two year extended product warranty Please call Belkin Components for detailed information regarding the cost of the program and shipping procedures The Old Battery Must Be Recycled Deliver the battery to an appropriate recycling facility or return it to Belkin in the packing carton that came with your new battery Additional recycling information is provided with your new battery REFER SERVICING TO QUALIFIED SERVICE PERSONNEL OR CONTACT BELKIN COMPONENTS 2 Grasp the tab attached to the battery and slide the battery out 1 Lay down the UPS Use your thumb to open
8. f a power failure Moreover Belkin Sentry Bulldog Shutdown Management Software displays all of the diagnostic symptoms on screen such as voltage level frequency battery level etc The software is available for Windows 95 Windows 98 Windows NT V4 or higher Windows 2000 Windows Me Unix and Novell 3 X and above Interface Kits Each interface kit includes a special interface cable which is required to convert status signals from the UPS into signals that the individual operation system can recognize The interface cable must be connected to the RS232 serial port on the UPS The other side of the interface cable can be connected to the DB9 serial port on your PC For other installation instructions and features please refer to the READ ME file Caution Use only factory supplied or UPS monitoring cable TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION UPS cannot UPS does not turn on properly Press switch and hold longer turn on than three seconds No alarm No Battery inside the UPS is bad Replace with the same LED lights type of battery from belkin com UPS fault Call for service if the above actions do not solve your problems UPS always at Power cord is loose Replace the power cord battery mode AG breaker is burned out Replace or reset the breaker or tripped AC utility voltage is too high Normal condition 00 low or blacked out Backup time Battery inside the UPS
9. lusive and in lieu of all others oral or written express or implied Some jurisdictions do not allow exclusion or limitation of implied warranties or of liability for incidental damages so the foregoing limitations or exclusion may not apply to you This warranty gives you specific legal rights which vary from jurisdiction to jurisdiction HOWEVER YOU WAIVE SUCH RIGHTS EXCEPT AS EXPRESSLY PROVIDED UNDER THE TERMS AND CONDITIONS OF THIS AGREEMENT TO THE MAXIMUM EXTENT ALLOWED BY LAW The license is governed by the laws prevailing in the State of New York without regard to its conflicts of laws principles ACKNOWLEDGMENT By opening the package on which this Agreement is printed or through which it is visible you acknowledge that you have read this Agreement understand it and agree that this agreement is the complete and exclusive statement of agreement between yourself and Belkin and supersedes any prior agreements oral or written and any other communications relating to the subject matter of this Agreement SEVERABILITY Any term or provision of this Agreement or any application thereof which may be prohibited or unenforceable by law in a particular jurisdiction shall be interpreted and enforced to the maximum extent allowed in such jurisdiction which the parties acknowledge could mean severing the provision from this Agreement or if allowed enforcing it in a narrower form without affecting the remainder of this Agreement or an
10. m self testing each time it is switched on Note The UPS maintains the battery charge when in the off position Switch Off Press and hold the on off test button for more than three seconds until the ON LINE or ON BATTERY LED goes off Self Test Use the self test to verify both the operation of the UPS and the condition of the battery In normal utility power push the on off test button less than two seconds and the UPS performs a self test function During the self test the UPS operates in BACKUP mode Note During the self test the UPS briefly operates ON BATTERY mode the REPLACE BATTERY LED comes on If the UPS passes the self test it returns to ON LINE operation The REPLACE BATTERY LED goes off and the ON LINE LED goes on steady If the UPS fails the self test it immediately returns to on line operation and flashes the REPLACE BATTERY LED The loads are not affected Recharge the battery overnight and perform the self test again If the REPLACE BATTERY LED is still on the battery will need to be replaced go to belkin com Silence In BACKUP mode push the on off test button less than three seconds to silence the audible alarm The function is void when under condition of LOW BATTERY LED STEADY LIGHT e MEANING BLINKING O ON LINE GREEN Utility is normal ON BATTERY Utility is abnormal supplies power to outlets O from battery sou
11. ment such as a printer fax machine scanner or a desk lamp should be powered by these outlets These outlets do not provide power during a power outage These outlets are always on when utility power is available and are not controlled by the front panel switch CONNECTING EQUIPMENT Connect the Loads Plug the loads into the output connectors on the rear of the UPS To use the UPS as a master on off switch make sure all of the loads are switched on Caution Never connect a laser printer or scanner to the backup outlets of a UPS with other computer equipment A laser printer or scanner periodically draws significantly more power when in use than when idle This may overload the UPS CONNECTING THE TELEPHONE FAX MODEM DSL LINES Connect a single telephone fax modem DSL line into the surge protected sockets on the back of the UPS The RJ11 modular sockets accept standard single line telephone connections This connection will require another length of telephone cable supplied Note This connection is optional but highly suggested as phone fax modem DSL lines often carry dangerous surges and spikes The UPS works properly without a phone fax modem DSL connection Caution The telephone fax modem DSL protection feature could be rendered inoperable if improperly installed Make sure that the telephone line from the wall is plugged into the connector marked IN and the device to be protected telephone fax modem is plugged int
12. o the connector marked OUT INSTALLATION Note Before the installation please inspect the UPS upon receipt Make sure that everything inside the package is L not damaged Connect to Utility Connect the AC inlet to utility power via the power cord Check if the Site Wiring Fault indicator is lit or not If lit please check the utility wiring A Site Wiring Fault will void your Belkin warranty Charge the Battery For best results charge the battery for six hours prior to initial use The UPS charges its battery whenever it is connected to the utility power COMMUNICATION INTERFACE Belkin Sentry Bulldog Shutdown Management Software and RS232 cable can be used with this UPS If used connect the interface cable to the computer interface port on the rear panel of the UPS and then connect to the serial port on your PC The communication port provides the following features 1 Monitors charger status 2 Monitors UPS status 3 Monitors battery status and condition 4 Monitors the utility status 5 Provides power switch function for power saving Dg P73506 UPS manual S series qxd 2 28 01 1 34 PM Page 2 SOFTWARE OPTIONS Belkin Sentry Bulldog Shutdown Management Software Belkin Sentry Bulldog Shutdown Management Software receives communication through the RS232 interface port to perform monitoring functions and also provide an orderly shutdown of the computer in the event o
13. ovide protection from transportation related damage These materials are invaluable if you ever have to return the UPS for service Damage sustained during transit is not covered under the warranty Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications To assure continued compliance use only shielded interface cables when connecting to computer or peripheral devices Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment FRONT PANEL Press the button longer than three seconds to turn the UPS on or off Press the button less than three seconds to activate the UPS self testing or to silence the backup alarm Low Battery Replace Battery Fault Overload VA On Line On Battery On Off Test OPERATION Switch On With the UPS plugged in press and hold the on off test button for more than three seconds until the ON LINE LED lights up to switch the UPS on The UPS will perfor
14. r break down analyze or modify the software USE AND RESTRICTIONS You are permitted to make backup copies of all the software disks for archival purposes only You must reproduce the proprietary notice set forth on the disks and affix them to all backup copies You are not permitted to use these programs in connection with a computer service or to use the backup copies other than as a replacement for the original copy TERM This license is effective upon acceptance by opening this envelope or in any other way using the enclosed software which will constitute your acceptance of and agreement to this Agreement and is effective until terminated The limited license in this Agreement will be automatically terminated if you fail to comply with any of the terms and conditions in this Agreement You agree that upon such termination you will immediately destroy all programs and documentation including all copies made or obtained by you LIMITED WARRANTY Except for the limited replacement warranty with respect to the disks expressly stated in the next paragraph THE PRODUCT SOFTWARE PROGRAM DOCUMENTATION AND ANY RELATED INFORMATION GOODS OR SERVICES ARE PROVIDED AS IS WITH NO WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER BELKIN HEREBY DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE The entire risk of the use results
15. rce Battery capacity is low The UPS will start LOW BATTERY shutdown The unit sounds an audible alarm REPLACE YELLOW 1 The LED flashes eight seconds It means the BATTERY UPS is in the self checking mode 3g 2 The LED flashes more than 10 seconds x t means the battery is bad or the charger is at fault There is a problem with the UPS The LED FAULT RED will be lit continuosly and the unit will OVERLOAD sound an audible alarm for 10 seconds Ron Battery ouput is drawing more power than gt the UPS can provide SEA RED There is either no ground circuit or a PANEL reversed polarity in the building wiring Backup Slow Alarm When in BACKUP mode the GREEN LED illuminates and the UPS sounds an audible alarm The alarm stops when the UPS returns to LINE NORMAL operation Low Battery Rapid Alarm In BACKUP mode when the battery energy runs low the UPS beeps rapidly until the UPS shuts down from a depleted battery or returns to LINE NORMAL operation Overload Continuous Alarm When the UPS is overloaded the connected loads exceed the maximum rated capacity the UPS emits a continuous alarm to warn of an overload condition Disconnect nonessential equipment from the UPS to eliminate the overload Fault 10 Seconds Continuously When the output is shorted the UPS emits a 10 second alarm Disconnect the equipment from the UPS prior to checking the equipment REAR PANEL
16. y other application of such term or provision in such jurisdiction or application of such term or provision in any other jurisdiction Belkin Components B V Diamantlaan 8 e 2132 WV Hoofddorp The Netherlands 2001 Belkin Components All rights reserved All trade names are registered trademarks of respective manufacturers listed P73579 Dg
Download Pdf Manuals
Related Search