StorCase 1 Bay Data Express DE110 (S21B103) SCSI, ATA
Contents
1. 40 9mm 22 0 47 11 9mm ME L sa mH 147 6mm 8 937 227 00mm 3 12 79 2mm Carrier Only 1 52 2 gt 8 mm _ p aza __ 120 1mm 7 939 f _ 201 65mm TT hth gt 5 d Z7 SS Ss lt 4 S Ss 3 75 2 z2 95 3mm S S 2 N x y L S 0838A 4 081 1 75 103 66mm 44 5mm Figure A 1 DE110 Physical Dimensions Dimensions are for reference only DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 22 Appendix B Optional Accessories Appendix B Optional Accessories Carrying Case 320FW_13 Figure B 1 Carrying Case The optional molded plastic carrying case P N S20E101 is designed to transport one 1 DE110 carrier from one site to another in a safe impact and moisture resistant environment Its compact dimensions 10 long x 11 wide x 4 5 high make it easy to carry and to store The foam lining is contoured to fit a single Data Express carrier Contact your StorCase dealer for further details and ordering information StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Reader s Comments 23 Reader s Comments Please take a few moments when your computer system is up and running to send us your ideas and suggestions for improving our products and documentation Did the installation go smoothly for you Are there any chan2. Figures 8 amp 11 If applicable connect the male connector on the split USB cable to the front USB port cable Figures 8 amp 11 Make sure the red wires on both cables are correctly aligned NOTE Connecting the DE110 to the system motherboard s only USB connector will disable one of the front USB ports if applicable Only the lower or second USB port will still function while the DE110 is installed Figure 9 If your system motherboard has only a spare 4 Pin USB connector connect the female connector on the split USB cable provided to it The female connector on the split USB cable has two rows of wires a 5 wire row and a 4 wire row Make sure to connect the 5 wire row to the system motherboard s 4 Pin USB connector refer to your system motherboard manufacturer s documentation for further information NOTE When connecting the 5 wire row to the 4 pin USB connector make sure that the wires on the cable correspond to the appropriate pins refer to your system motherboard manufacturer s documentation for information on pin assignments DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 12 Installation Disabled Front USB Ports Functional Figure 9 Typical Front USB Interface Your system may vary 7 With the drive carrier locked in place inside the receiving frame install the DE110 into the 5 25 drive opening in the computer or expansion chassis Use the ap propriate guides to
3. amp 3B Unit ID Number Indicator Figures 3A amp 3B This LED is for ID display purposes only The DE110 ID is shown if the carrier is Installed and Locked in the receiving frame or if the carrier is removed from the receiving frame If the carrier is Installed but not Locked in the receiving frame a u will be displayed to indicate an unlocked condition The unit ID number is selected by means of the unit ID select switch on the front of the receiving frame using a special alignment tool supplied with the DE110 Figure 13 amp Table 1 The Activity Indicator Figures 3A amp 3B A small dot next to the unit ID number illumi nates to indicate when the host computer is accessing the data on the DE110 carrier This dot will flash during communication with the host computer Receiving Frame Unit ID Number a Indicator Activity Indicator Figure 3A Receiving Frame Front Panel StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Introduction 5 Activity Indicator Carrier Removed Carrier Installed Carrier Installed from Receiving Frame unlocked locked The number 2 shown above is for illustration purposes only It can be any valid unit ID number The letter u above middle will appear as illustrated 0064 Figure 3B Receiving Frame Unit ID Number and Activity Display Drive Carrier Figure 4 Key Lock Drive Power Switch Figure 4 Performs three
4. a USB 2 0 controller and USB 2 0 cable provided are required Windows 2000 XP both support USB 2 0 For Windows 98 a driver down load is required at http www storcase com support firmware asp The StorCase Technology Data Express DE110 for Backup is a removable drive carrier and receiving frame designed to provide durable and reliable mounting for one 1 low profile up to 1 high 3 5 Ultra ATA100 drive within a 5 25 half height peripheral slot Figure 2 It is downward compatible with earlier technology IDE drives The USB 2 0 DE110 allows a drive to be removed and transported to another USB 2 0 or PATA DE110 equipped computer or expansion chassis and also provides the ability to secure sensitive data by removing and storing the drive safely for future use The DE110 for Backup includes a EMC Retrospect Express or Disk to Disk Backup soft ware CD which allows for easy data backup and restoration gt Receiving Frame N Drive Carrier Figure 2 DE110 Receiving Frame and Carrier This User s Guide describes the steps required to install the DE110 removable enclosure inside a computer peripheral bay or external expansion chassis This guide supplements documen tation provided with the host computer system operating system and the drive to be installed within the carrier DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 4 Introduction Receiving Frame Front Panel Figures 3A
5. functions The key switch assures proper seating of the drive carrier within the receiving frame turns power to the drive carrier ON and OFF and prevents unauthorized removal or installation of the carrier For the computer to access data on the disk drive the key must be turned counterclockwise to the locked position NOTE Disable USB device on host computer desktop before turning OFF power simply right click on the Unplug Eject Hardware Icon located in the System Tray and disconnect Power Switch Figure 4 Drive Carrier DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 6 Introduction Receiving Frame Rear Panel Figures 5A amp 5B USB Connector Provides a standard interface for USB 2 0 signals DC Power Connector P1 A standard 4 pin DC power connector is used to accept DC power Option Pins W1 Refer to Figure 5B IDO amp ID1 Jumper is factory installed on IDO Change jumper position to Pins 3 amp 4 for ID1 designation IDO amp ID1 are for ID display purposes only Refer to Table 1 for further information Remote Activity LED RLED These pins provide power for a remote LED device activity indicator Pin 13 Cathode Pin 14 Anode Factory Reserved Pins These pins are reserved for factory use only Do not install jumper under any circumstances DC Power Option Pin Connector Connector Factory Reserved Pins USB 2 0 No Jumper Installed Connector
6. over 3 Fasten the drive into place with four 4 6 32 Phillips Flat Hd screws Figure 6 Some drives may require minor adjustment before securing into carrier with screws 4 Install the provided drive cover Figure 7 StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Installation 9 Drive Not Included DC Power Cable Drive Carrier Board Drive Carrier l ji j i i 7 i I i j ji I l i I a 1 i 6 32 Phillips Flat Hd Screw 4 each Figure 6 Drive Installation Assembly 1 Insert this end into the carrier first 2 Slide the cover towards the back of the carrier gt e 3 Secure with 6 32 Phillips Flat Hd screws 2 Total Figure 7 Drive Cover Installation DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 10 Installation Installing the Receiving Frame NOTES Use a 2 Phillips screwdriver for this procedure Refer to your system motherboard manufacturer s documentation for further information The drive should be installed into the carrier before installing the receiving frame into the mounting bay of a computer or expansion chassis 1 Turn OFF power to the computer 2 Open the computer system according to the manufacturer s instructions If neces sary temporarily remove any expansion boards that may make installation difficult 3 Locate the USB connector s on the system motherboard refer to your syste
7. position the Data Express and fasten it into place with the four 4 6 32 Phillips screws provided Figure 10 illustrates the location of the mounting holes Mounting holes are provided on each side and the bottom of the receiving frame to accommodate a variety of mounting configurations Use the mounting holes which best suit the computer or expansion chassis configuration Note that bottom mounting holes require self tapping screws not provided Front of Unit Mounting Holes Left __ J N a i su SN Mounting Holes a Right Mounting Holes Bottom Figure 10 Receiving Frame Mounting Holes StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Installation 13 8 Adjust the front of the receiving frame so the carrier slides freely in and out on the receiving frame guides The position of adjoining peripheral units may require adjust ment 9 Connectthe remaining end of the split USB cable to the DE110 USB connector located on the receiving frame motherboard Figures 5 amp 11 Connect to Front a USB Ports PA Male Connector Split USB Cable Connect to System Motherboard Female Connector Optional refer to Step 5 for further information Figure 11 Connecting the Split USB Cable DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 14 Installation Spacer Plates Optional NOTE Depending on the computer system spacer plates may be po
8. Figure 5A Receiving Frame Motherboard Rear View StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Introduction IDO we Factory Installed Jumper 1 m r 2 300 4 I D1 oo oo og oo 130014 oo oo oo oo Pi P13 P14 Cathode Anode Remote Activity LED Figure 5B Enlarged View of the Option Pins DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 8 Installation INSTALLATION Preparation While performing the steps in this section work on a soft surface to prevent excessive shock to the drive being installed Also refer to the manufacturer s documentation provided with the drive Remove the drive from its protective packaging Plastic Drive Bezel If the drive came equipped with a plastic front bezel it must be removed before installing the drive into the drive carrier Master Slave Drive Selection Drive can be configured as Cable Select recommended or as Master Drive Installation NOTE A 2 Phillips screwdriver will be required during this procedure 1 Attach the DC power cable from the Drive Carrier Board to the drive Figure 6 2 Carefully insert the drive into the carrier Slide the drive towards the Drive Carrier Board so that the I O connector on the drive mates with the connector on the Drive Carrier Board Figure 6 Make sure that the DC power cable is not pinched Turn the drive carrier assembly
9. O iaa Alne ji SWDI YD PEY NN DD DD E T 22 Reader s Comments N NM ee err r PSPDDPNPNPNPNPNPpppph e e mm 23 DE110 for Backup User s Guide Rev A04 StorCase Technology Inc vi Figure 1 Figure 2 Figure 3A Figure 3B List of Figures Package Conle n 1S 4 54 454 pall l y k cl r K k a piada 2 DE110 Receiving Frame and Carrier uuii kek eke keke 3 Receiving Frame Front Panel we 4 Receiving Frame Unit ID Number and Activity Display 5 Figure 4 Drive Carrier yj serve tat nal al ya w y en ka k r v ren dE y y yek0 di V k r W Figure 5A Receiving Frame Motherboard Rear View tet Figure 5B Enlarged View of the Options PINS cc eeceeeeeeeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaeeateaee Figure 6 Drive Installation Assembly kk kk kk kK k k KAK Figure 7 Drive Cover Installation wi Figure 8 Connecting the Split USB Cable to the System 11 Figure 9 Typical Front USB Interface iinr Figure 10 Receiving Frame Mounting Holes Figure 11 Connecting the Split USB Cable iuiiiE keke kk kek Figure 12 Spacer Plate Installation Optional 0 eeceeeseeseeeeeeeceeeeeeeeeeeeeeeeeeeeeeeeeeeaes 14 Figure 13 Unit ID Select Switch Location uiiii Eke keke kek 16 Figure A 1 DE110 Physical Dimensions 0 cece cece eens eeee cee eeaeeeeeseaeeeaeseaeseaeeeaeeneeees 21 Figure B 1 Ca
10. StorCase Technology Data Express DE110 for Backup Removable USB 2 0 Drive Enclosure User s Guide StorCase Technology Data Express DE110 for Backup Removable USB 2 0 Drive Enclosure User s Guide Part No D89 0000 0273 A04 February 2006 Kingston Technology Affiliate Storcase TECHNOLO SG Safest Place for Your Data StorCase Technology Inc 17600 Newhope Street Fountain Valley CA 92708 9885 Phone 714 438 1850 Fax 714 438 1847 DE110 for Backup User s Guide Rev A04 StorCase Technology Inc LIMITEDWARRANTY STORCASE TECHNOLOGY Incorporated StorCase warrants that its products will be free from defects in material and workmanship subject to the conditions and limitations set forth below StorCase will at its option either repair or replace any part of its product that proves defective by reason of improper workmanship or materials Repair parts or replacement products will be provided by StorCase on an exchange basis and will be either new or reconditioned to be functionally equivalent to new This warranty does not cover any product damage that results from accident abuse misuse natural or personal disaster external power surge or failure or any unauthorized disassem bly repair or modification StorCase will not be responsible for any software firmware or other customer data stored within or interfacing with a StorCase product Duration of Warranty Twelve Y
11. e of the package Return the unit with all the original packing materials Before removing any component from its packaging discharge any static electricity by touching a properly grounded metal object Serial Numbers Both the DE110 receiving frame and carrier are labeled with serial numbers These numbers must be reported to the StorCase Customer Service Representative in order to receive a Return Material Authorization RMA for warranty claims Locate the serial number labels and record the numbers in the spaces provided below DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 2 Introduction Package Contents The USB 2 0 DE110 package contents include the following items If any item is missing or damaged contact your StorCase dealer for a replacement Split i USB Cable J Accessory Bag DE110 Carrier and Receiving Frame 1 Drive Carrier 6 Drive Lock Keys 2 Receiving Frame 7 Self Tapping Screws 3 Drive Cover not shown 8 Alignment Tool 4 M83 Phillips Flat Hd Screws 9 Insert Sheet not shown 5 Split USB Cable 10 EMC Retrospect Backup Software CD not shown Figure 1 Package Contents StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Introduction 3 General Description NOTES USB 2 0 DE110 carriers and PATA DE110 carriers are interchangeable and will work in either PATA USB 2 0 or SATA DE110 universal receiving frames For USB 2 0 operation
12. ear Warranty The following StorCase products are covered by this warranty for a period of twelve 12 years from the original date of purchase from StorCase or its authorized resellers all Data Express Profile model types DX removable device enclosures Seven Year Warranty The following StorCase products are covered by this warranty for a period of seven 7 years from the original date of purchase from StorCase or its authorized resellers all Data Express Classic model types DE removable device enclosures and all Data Silo Data Stacker and InfoStation external expansion chassis except for those compo nents integrated into or purchased separately for use with these products which are identified and covered by the three year or hard drive warranties described below All StorCase interface cables and other accessories specifically intended for use with the StorCase products identified above are also covered by this 7 year warranty Three Year Warranty The following components integrated into or purchased separately for use with StorCase Data Express Data Silo Data Stacker and or InfoStation products are subject to warranty for a period of three 3 years from the original date of purchase from StorCase or its authorized resellers all RAID controllers power supplies fans and blowers Two Year Warranty The following StorCase products are covered by this warranty for a period of two 2 years from the original date of purchase
13. from StorCase or its authorized resellers all Rhino JR fixed external expansion chassis model types FJR and all RhinoJR removable device enclosures model types RJR One Year Warranty All StorCase products identified as Reconditioned or Special Inventory are covered by this warranty for a period of one 1 year from the original date of purchase from StorCase or its authorized resellers Reconditioned products may only be exchanged for reconditioned products Hard Disk Drive Warranty All hard disk drives purchased from StorCase or through its authorized resellers whether purchased separately or integrated into StorCase products are subject to the warranty terms and conditions provided by the drive manufacturer Third Party Software Warranty All third party software purchased from StorCase for use with and or as part of StorCase products is subject to the warranty terms and conditions provided by the software manufacturer StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Warranty Claim Requirements To obtain warranty service the defective product must be returned to your local authorized StorCase dealer or distributor or with prior StorCase approval to the StorCase factory service center For defective products returned directly to StorCase a Return Material Authorization RMA number must be obtained by calling StorCase Customer Service at 714 445 3455 The RMA number must be pr
14. ges you would like us to make either with the hardware itself or with the installation instructions Everyone at StorCase Technology is working toward the goal of providing you with the highest quality most cost effective products available on the market and we need your comments to guide our efforts We look forward to hearing from you soon Date Your Name Address Telephone To mail this page carefully remove it from the manual fold it staple or tape it shut and drop itin the mail To FAX this page carefully remove it from the manual or make a photocopy and FAX it to us at 714 438 1847 Thank you for taking the time to help us make our products better DE110 for Backup User s Guide Rev A04 StorCase Technology Inc FOLD ALONG THIS LINE AND STAPLE SHUT NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST CLASS MAIL PERMIT NO 10686 SANTAANA CA POSTAGE WILL BE PAID BY ADDRESSEE Kingston Technology Affiliate Fi Storcase CHNOLOGY Safest Place for Your Data 17600 NEWHOPE STREET FOUNTAIN VALLEY CA 92708 9885
15. hich are not stated herein including to the extent permitted by applicable law any implied warranty of merchantability or fitness for a particular purpose In no event will StorCase be liable to the purchaser or to any user of a StorCase product for any damages expenses lost revenues lost savings lost profits or any other incidental or consequential damages arising from the purchase use or inability to use a StorCase product even if StorCase has been advised of the possibility of such damages Copyright 2006 StorCase Technology All rights reserved All registered trademarks are the property of StorCase Technology All other logos and trademarks ses are properties of their respective companies osii DE110 for Backup User s Guide Rev A04 StorCase Technology Inc v Kingston Technology Affiliate Fs Storcase TECHNOLOGY Safest Place for Your Data Declaration of Conformity Company Name StorCase Technology Inc Corporate Office Address 17600 Newhope Street Fountain Valley CA 92708 Manufacturing Address 17600 Newhope Street Fountain Valley CA 92708 Product Name Data Express USB 2 0 DE110 Model Number 21B105 21P103 S21P104 S21P108 S21P109 S21P112 S21P113 S21P128 S21P 129 S21P130 21P131 S21P132 Conforms to the following standards EMC Directives ITE Emission 89 336 EEC EN 55022 1998 A1 A2 EN 61000 3 2 Harmonic Current EN 61000 3 3 Voltage Fluctuations and Flic
16. ker EN 55024 1998 A1 A2 ITE Immunity IEC 61000 4 2 IEC 61000 4 5 IEC 61000 4 3 IEC 61000 4 6 IEC 61000 4 4 IEC 61000 4 8 IEC 61000 4 11 Safety Standards CSA NRTL C CAN CSA C22 2 No 950 95 UL 1950 TUV EN 60950 2000 FCC Part 15 Class B EMI Standards AS NZS 3548 Information Technology Equipment EMC Standards Supplier s Code Number N10664 Year of Manufacture 2004 Signature StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Table of Contents INTRODUCTION Packaging Information sisiane kila WER ada y d beatin da H e sirke Y K W 1 Serial Numbers l Oe EAOa CD isi EEA ATT General DESCrIPtION rasiri E p l lak lak sma ay anaa p aae aaee M Al kana k bark lak ka Eii Receiving Frame Front Panel Drive Carrier Receiving Frame Rear Panel INSTALLATION cac cncnetanetacetidin htanias avis uneven 8 Pir pakalloi sien hears ens iinn E raa Ae aT AEA A E coders Aana AEA Aa ASS Ae a AEA TANE AAEM IAES 8 DIERE EU EOI EE P E EE TEA PATAT E EAN 8 Installing the Receiving Frame 10 Spacer Plates Optional J 14 Selecting the Unit ID Number 15 Unit ID Select Switch Settings 16 Data Backup and Restoration E kk kk kk k kek kak kr A KAKA KAK AR 17 APPENDICES aaee N DD DD Dn AENEA 19 Appendix A Specifications Dimensions 20 Appendix B Optional Accessories 22 L
17. lease refer to the EMC User s Guide provided on the EMC Retrospect Backup software CD DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 18 Installation This Page Left Blank Intentionally StorCase Technology Inc DE110 for Backup User s Guide Rev A04 19 APPENDICES DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 20 Appendix A Specifications Dimensions Appendix A Specifications Dimensions The specifications and dimensions below are for reference only Environmental Specifications Operating Storage Ambient Temperature 0 C to 50 C 40 C to 70 C Relative Humidity 10 to 80 10 to 90 1000 to 10 000 ft 1000 to 40 000 ft Altitude 305m to 3048m 305m to 12195m BZ E 1 Non condensing with maximum gradient of 10 per hour 11 msec pulse width 1 2 sine wave dika kaya dala TEZ Ger n With carrier removed Chassis Reliability Maintainability Electrical Specifications MTBF 500 000 Hours input 5V 115mA Preventive N Maintenance one USB 2 0 amp Compliance ATA ATAPI 6 Max Transfer Rate Up to 480 Mbps Max Cable Length 6 ft per USB device StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Appendix A Specifications Dimensions 21 Receiving Frame with Carrier 2 06 Installed 523mm 3 12 79 2mm 1 61
18. m motherboard manufacturer s documentation for further information Depending on your system motherboard it may have one or more 9 Pin USB con nectors with one typically connected to front USB ports on the PC or it may have only a 4 Pin USB connector If your system motherboard has several 9 Pin USB connectors proceed to Step 4 If your system motherboard has only one 9 Pin USB connector proceed to Step 5 If your system motherboard has only a spare 4 Pin USB connector instead of 9 Pin proceed to Step 6 4 Locate a spare 9 Pin USB connector on the system motherboard and connect the female connector on the split USB cable provided to it Figures 8 amp 11 StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Installation 11 5 Typical System Motherboard your system may vary er ee Connect to Front USB Port Cable If applicable Front USB Connect to Motherboard Connect to DE110 Port Cable USB Connector USB Connector Figure 8 Connecting the Split USB Cable to the System If your system motherboard has only one 9 Pin USB connector and it is connected to the front USB ports Figure 9 disconnect the front USB port cable from the system motherboard USB connector refer to your system motherboard manufacturer s documentation for further information Connect the female connector on the split USB cable provided to the newly vacated USB connector located on the system motherboard
19. ominently displayed on the outside of the return package Shipments must be freight prepaid and insured and must include the product serial number a detailed description of the problem experienced and proof of the original retail purchase date Products must be properly packaged to prevent damage in transit Damage resulting from improper packaging will not be covered by this warranty The StorCase factory service center is located at 17650 Newhope Street Receiving Dock Gate 4 Fountain Valley CA 92780 U S A Free Technical Support StorCase provides free technical support If you experience any difficulty during the installation or subsequent use of a StorCase product please contact StorCase s Technical Support Department prior to servicing your system This warranty covers only repair or replacement of defective StorCase products as described above StorCase is not liable for and does not cover under warranty any costs associated with servicing and or installation of StorCase products StorCase Technical Support can be reached in the U S at 714 438 1858 or toll free at 888 435 5460 U S and Canada only StorCase European Technical Support can be reached in the U K at 44 0 1932 738900 Disclaimers The foregoing is the complete warranty for the products identified above and supersedes all other warranties and representations whether oral or written StorCase expressly disclaims all warranties for the identified products w
20. rame by turning on your computer A number will appear in the unit ID display window if the carrier is locked in place 2 Unlock the DE110 drive carrier and remove it from the receiving frame A u will be displayed initially when the unit is unlocked but will return to a number when the carrier is removed from the receiving frame WARNING Unlocking the carrier unit switches DC power OFF to the drive Since disk drives require a short amount of time to spin down allow about 15 seconds before pulling the carrier unit out of the receiving frame to avoid possible damage to the drive 3 Use the alignment tool supplied with the DE110 to select the ID number of the disk drive Refer to Figure 13 for the location of the ID Select Switch inside the receiving frame Table 1 lists the valid unit ID numbers available for the drive NOTE The unit ID number display is for ID display purposes only The Master Slave setting must still be set on the drive itself refer to page 8 of this User s Guide for further information 4 After you have selected an appropriate unit number replace the DE110 carrier in the receiving frame and LOCK IT IN PLACE NOTE The lock on the DE110 carrier functions as a lock and a DC power switch for the carrier unit The lock must be engaged in order to supply power to the carrier and installed drive 5 Reboot the computer The new disk is now ready for use although it may have to be formatted or initialized prior to
21. rrying Case e as s k l WENE ite yA Y d dak da M ek awda W n awda y d a dara kek EE 22 List of Tables Table 1 Unit ID Select Switch Settings ee ececeeseseeeeeeeeeeeeeeeeeeeeeeeseeseeseeesaeeaeeaeeeeeeees 16 NOTICE This User s Guide is subject to periodic updates without notice While reason able efforts have been made to ensure the accuracy of this document Stor Case Technology Inc assumes no liability resulting from errors or omissions in this publication or from the use of the information contained herein Please check the StorCase web site at http www storcase com or contact your StorCase representative for the latest revision of this document StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Introduction 1 INTRODUCTION Packaging Information The StorCase Technology Data Express system is shipped in a container designed to provide protection and prevent damage during shipment The Data Express unit was carefully inspected before and during the packing procedure at the factory Bent or broken connectors or evidence of other damage to the Data Express should be reported to the shipper immediately Refer to Figure 1 for the package contents If the wrong Data Express model has been received please call your reseller or StorCase at 800 435 0642 to arrange for a Return Material Authorization RMA StorCase cannot ac cept returns which do not display an RMA number on the outsid
22. sitioned on the receiving frame to utilize either top or bottom row of side mounting holes Figure 12 The DE110 is designed to fit most computer systems with standard 5 25 peripheral slots The installation of the spacer plates provided may or may not be necessary Spacer Plate 2 Total Figure 12 Spacer Plate Installation Optional 10 Connect the power cable from the DC power supply in the computer or expansion chassis to the power connector on the DE110 receiving frame Refer to Figure 5A for the DE110 receiving frame power connector location 11 Replace any expansion boards that may have been removed earlier Replace the system cover according to the manufacturer s instructions 12 Reconnect any system or peripheral cables removed earlier 13 Turn ON power to the computer If the installation has been successful and all the cables have been properly attached the system should boot normally Although the computer may not recognize the DE110 yet the front panel display on the DE110 receiving frame should illuminate StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Installation 15 14 The new drive may need to be formatted or initialized prior to use with the operating system and applications software Refer to the drive and or computer manu facturer s documentation for formatting information Selecting the Unit ID Number 1 Verify that power is turned ON to the DE110 receiving f
23. use with your operating system and applications software NOTE Disable USB device on host computer desktop before turning OFF power simply right click on the Unplug Eject Hardware Icon loca ted in the System Tray and disconnect DE110 for Backup User s Guide Rev A04 StorCase Technology Inc 16 Installation Unit ID Select J Rotating Switch Drive Carrier Guide Typical Data Express Receiving Frame Figure 13 Unit ID Select Switch Location Unit ID Select Switch Settings NOTE The unit ID number display is for ID display purposes only The following table lists the Unit ID Select Switch settings and the valid AT IDE unit numbers Please note that all invalid switch settings will result in a blank display in the receiving frame display window Table 1 Unit ID Select Switch Settings A ele ig 1 2 3 4 5 6 7 8 9 rte oe aer Blank 0 1 Blank Blank 2 3 Blank Blank Blank StorCase Technology Inc DE110 for Backup User s Guide Rev A04 Installation 17 Data Backup and Restoration NOTES The DE110 for Backup includes a EMC Retrospect Express or Disk to Disk Backup software CD Disk to Disk version supports the following OS Microsoft Windows XP 2000 Professional 2000 Advanced Server 2003 Server NT 4 0 Workstation NT 4 0 Server 95 98 ME Mac OS 7 1 or later and Mac OS X 10 1 or later For easy data backup and restoration p
Download Pdf Manuals
Related Search