Uniden 7100A Telephone User Manual
Contents
1. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY In the event that the product does not conform to this warranty the Product should be shipped or delivered freight pre paid with evidence of original purchase e g a copy of the sales docket with a full description of the problem to the warrantor at UNIDEN AUSTRALIA PTY LIMITED UNIDEN NEW ZEALAND LIMITED SERVICE DIVISION 150 Harris Road East Tamaki Auckland 345 Princes Highway Rockdale NSW 2216 Ph 09 273 8383 Ph 02 9599 3577 Fax 02 9599 3278 Fax 09 274 0009 Free Call 1800 632 789 Customers in other States should ship or deliver the Product freight pre paid to their nearest Uniden Authorised Repair Centre Contact Uniden for the nearest Warranty Agent to you NOTE Keep your receipt of purchase in a safe place in case you ever need warranty service You should also save the carton and packaging material for storage or shipping purposes 412. e Coin operated systems Party line systems e Most electronic key phone systems Nn z rri z Z es o oS Z SAFETY INFORMATION INTRODUCTION SAFETY INFORMATION NOTE NEW ZEALAND ONLY 2 The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to it s network It indicates no endorsement of the product by Telecom nor does it provide any sort of warranty Above all it provides no assurance that any item will work correctly in all respects with with another item of Telepermitted equipment of a different make or model nor does it imply that any product is compatible with all of Telecom s network services This equipment may not provide for the effective hand over of a call to another device connected to the same line Congratulations on the purchase of your 7100A Digital Telephone Answering Machine DTAM This product has been designed especially for the Australian and New Zealand market It is guaranteed to provide you with reliability long life and outstanding performance Digital means all messages are stored on a computer chip there are no tape mechanisms to wear out and no tapes to bother with This gives you capabilities that tape based answering machines don t have For example you can delete individual messages skip forward backward or play only new messages T
3. A Memo 0 eee eee Using Call Breakthrough Changing the CBT Code 45 Remote Operation 00 Remote Answer On 0 00 0 ee Changing the Remote Operation Security Code Using Remote Commands Troubleshooting 000 Resetting the DIAM 00000 Care and Maintenance Warranty sss ee nrs priate nd beens Bees FOR YOUR SAFETY PLEASE OBSERVE THE FOLLOWING e Never install telephone wiring during lightning storm e Do not use your DTAM unit near water or when wet e Do not take apart or remove the screws there are no serviceable parts inside e Make sure the line cord and AC Adaptor do not cause a trip hazard READ THIS BEFORE INSTALLATION Your DTAM conforms to Australian and New Zealand Telecommunications Authority Standards and you can connect it to most telephone lines However each device you connect to the phone line draws power from the phone line We refer to this power draw as the device s Ringer Equivalence Number or REN This number is on the label on the bottom of the DTAM If you are using more than one phone or other device on the line add up all the RENs If the total is more than three your phone s might not ring and your DTAM might not answer If ringer operation is impaired remove a device from the line NOTE You must not connect the DIAM to any of the following
4. long e The memory may be full Delete some or all of the saved messages No sound on the base unit speaker during call monitoring or message playback e Adjust the volume control on the side of the DIAM Refer page 26 Cannot record outgoing message OGM e The memory may be full Delete some or all of the saved messages Continued over 37 TROUBLESHOOTING s am es a ey WN Q Q Z ap TROUBLESHOOTING CARE AND MAINTENANCE TROUBLESHOOTING PROBLEM SUGGESTION Cannot access remote call in features from Make sure you re using the correct PIN another touch tone phone number e Make sure that the touch tone phone you re using can transmit the tone for at least two seconds If it cannot you may have to change to another phone Clock loses time e The power to the base unit has been interrupted Reset the clock as detailed on page 19 of this owners manual e Follow the instructions on page 16 Be sure to leave the AC Adaptor connected Message counter LED flashes Battery low or not fitted so you do not loose the stored information Answering system switches on after 9 rings The unit is waiting for your PIN number so beeps once then disconnects after 8 seconds you can clear message from a remote location Refer to page 33 for more details RESETTING THE DTAM If all of the above suggestions do not resolve es your problem use a
5. E OPERATION REMOTE OPERATION 6 Stop playback and message recording 7 Record a memo 81 Change OGM1 After the DTAM beeps begin your new OGM1 When you finish press 6 The DTAM beeps and replays 82 Play OGM1 If no OGM1 is recorded the DTAM announces You have no announcement one IF your 7100A DTAM unit is not performing to your expectations please try these simple steps If you are still unable to resolve the problems contact Uniden Customer Service for assistance PROBLEM SUGGESTION 91 Change OGM2 After the DTAM beeps begin your new OGM2 When you finish press 6 The DTAM beeps and replays 92 Play OGM2 If no OGM2 is recorded the DTAM announces You have no announcement two After you press 2 or 3 to play messages Press To 1 Replay the previous message 3 Skip to the next message 4 Replay the current message 5 Delete the current message 6 Stop message playback 36 Answering system does not work e Make sure the telephone line cord is plugged in e Make sure that the AC Adaptor is plugged in e Make sure the DTAM is turned on e There has been a power failure Disconnect the telephone line cord press the reset button and re connect the telephone line cord Answering System does not answers after 3 rings The memory may be full Delete some or all of the saved messages Messages are incomplete e The incoming messages may be too
6. NSWER CALLS To Turn The DTAM On To turn on the DTAM and set it to answer calls and record messages press once The DIAM announces Answer on beeps once and plays the outgoing message The red Answer on indicator lights up The DTAM is now set to answer calls using the OGM 1 message and record callers messages zx N QO az ies z Z To Announce Only To set the DTAM to answer calls but not record messages press when the DTAM is set to Answer on mode The DTAM announces Announce only beeps and plays your announcement then displays EM Announce only The DTAM is now set to answer calls using the OGM 2 message without recording callers messages To swap between recording messages OGM 1 or announce only OGM 2 simply press CAD or CAB as required To Turn The DTAM Off To turn off the DTAM so it does not answer calls press again The DIAM announces Answer off beeps and the red Answer on indicator turns off 25 BASIC OPERATION BASIC OPERATION BASIC OPERATION RECORDING INCOMING MESSAGES The maximum incoming message recording length is 60 seconds When a recording reaches 55 seconds the DIAM beeps once to notify the caller that time will soon be up When the recording reaches 60 seconds the DTAM sounds one long and four short beeps and plays Thank you for your call then hangs up The DTAM hangs up and resets to answer the next call when e The call
7. TIONS Q memo A code set 10 time set Play Plays messages also pauses messages during playback Memo Records a memo message Repeat Repeat the current message Code Set Sets the call breakthrough code CBT Skip Skips to next message or if held down speeds up during playback Time set Sets the time date Stop E Stops message playback LED Display pln stele eee eE No messages stored in the machine Number of messages stored eg 7 Announcement 1 Outgoing Message Announcement 2 Announce Only Message Announce Only Battery Low or not installed Clock Set Playback Paused Messages Deleted Memo Record Set Call Breakthrough CBT Code Set Security Code 14 SELECTING A LOCATION Select a location that is near both a telephone socket and an AC outlet CONNECTING THE DTAM TO THE TELEPHONE LINE To connect the DTAM to the phone line plug one end of the supplied modular cord into the jack on the back of the DTAM labelled line Then plug the cord s other end into a telephone socket NOLIVTIVISNI If you wish to connect both the DTAM and a telephone to the telephone line simply use the two way splitter supplied Plug the splitter into the telephone wall socket then plug the DTAM into one side of the splitter and the phone into the other side INSTALLATION INSTALLATION INSTALLATION CONNECTING POWER A Use only the Uniden AC Adaptor supplied with this Uni
8. Uniden 7100A Digital Telephone Answering Machine Operating Guide for Australia and New Zealand Uniden A Clear Signal of What s Ahead 1998 UNIDEN CORPORATION ALL RIGHTS RESERVED CONTENTS Safety Information 0 5 Introduction ho ieee ee aa eared eas 7 Q Parts Checklist 0 00 0 000 9 S F AUULOS 2 os hPa ea OE We 11 Z Functions 5 oe hae Re a 13 Installation 24 0 s gen 2334 oe teeawek bus 15 Selecting a Location 0000005 15 Connecting the DTAM to the Telephone Line 15 Connecting Power 000 e eens 16 Backup Battery 46 ua cece va beet ov awre es 16 Preparation 3 90 eo Mean Sey ern 19 Setting the Day and Time 19 Recording the Outgoing Messages 20 Setting the Number of Rings 23 Basic Operation 00000 25 Setting the DTAM to Answer Calls 25 Setting the DTAM to Announce only 25 Turning the DTAM off 0 25 Recording Incoming Messages 26 Continued over CONTENTS SAFETY INFORMATION CONTENTS Screening Calls lt 9 ve idea de ee eG Adjusting the Volume 000 Playing Messages 0000 c eee e eee Playing New Messages Only Pausing Message Playback Fast Message Playback 005 Deleting Messages 0 0 e eee eee Recording
9. a _ T r Pa na a a To delete all messages hold down when playback has finished EM appears the DTAM announces Erase message s then sounds a long beep The DTAM does not delete messages that have not been played to the end If you have messages that have not been played the DIAM sounds four beeps 29 NOLLVaddO OISVE BASIC OPERATION BASIC OPERATION BASIC OPERATION RECORDING A MEMO A memo is a message you can record by speaking directly into the DTAM without having to call in on the phone Follow these steps to record a memo up to 60 seconds long 1 Press CHID until ES appears The DTAM sounds a long beep and appears Speak into the beek rani microphone in a normal voice peas F i The display counts up the A keed recording time i5 a Ba a es G i pe i al J a Bae enn 2 The DIAM automatically stops recording after 60 seconds or after 8 seconds of silence or you can press button when you finish the memo The DTAM beeps once and the message number indicator increases by one The memo is stored along with the incoming messages To hear the memo simply play back your messages USING CALL BREAKTHROUGH If you screen your calls but want to be sure to know when calls come in from certain people give those people your call breakthrough CBT code Tell them to enter the code during the outgoing message 30 When a caller enters the CBT code the DTAM alerts yo
10. aller enters a preset code during the outgoing message Memory Backup Protects messages stored in memory in case of a power failure Requires a 9 volt battery not supplied Adjustable Ring Number Lets you set the DTAM to answer the phone after two rings four rings or seven rings Toll Saver Lets you avoid unnecessary long distance charges when you call by long distance to check your messages Room Monitor Lets you listen from a remote phone to the room where you installed the DTAM Lets you turn the DTAM on or off Call Message Counter Shows the number of messages the DTAM has recorded Lets you quickly delete messages individually or all at once Remote Access Lets you turn the DTAM on or off and listen to messages when you are away from your home or office Memo Recording Lets fou leave messages for yourself or others in your home or office 12 Q O 9 ANLOJ A RONIOR Outgoing Message 1 Used to record the OGM1 greeting and used to select OGM1 as the greeting Q O lt N ee Se Message 2 Used to record the OGM2 announcement and used to select OGM2 as the greeting announcement O0 D 3 a 2 Message Light The Red light above the answer button lets you know if you have new messages and whether your DTAM is on or off Answer Switches DIAM between answer on and answer off Q O i D Delete Used to delete one or all messages 13 FUNCTIONS FUNC
11. den 7100A Digital Telephone Answering Machine 1 Plug the AC Adaptor into the power socket at the rear of the DIAM labelled 9 V AC 400mA 2 Then plug the other end into your mains socket When you first connect power the DTAM beeps once and announces Please wait The message counter counts up from 0 to 18 Then the DTAM beeps EH H El and M alternatively appear to indicate that no outgoing messages are recorded BACKUP BATTERY If the power fails or you unplug the DTAM a 9V backup battery not supplied would save the messages and the settings for the day time and security code We recommend you use an alkaline battery 16 Disconnect the telephone line cord before replacing the battery Always use a new 9V alkaline battery for optimum performance Follow these steps to install the backup battery 1 Use a Phillips screwdriver to remove the screw on the compartment cover a eee Se Ja i i A A s J f s gt lt M J 4 K gt D i 2 Push down the latch to release the battery compartment cover i pe AN of A S e 3 Snap the battery s contacts firmly to the battery connector then place the battery into the compartment 4 Replace the cover and secure it with the screw A Dispose of old battery promptly and properly 17 NOLIVTIVISNI 18 PREPARATION SETTING THE DAY AND TIME The DTAM records the day and time of the call with each phone message Follow these steps t
12. e or is not setup properly Remote Answer on e Call your telephone After 15 rings you will hear Answer Off Enter your remote security code within 8 seconds The DTAM beeps to confirm valid code e Enter Q for OGM1 or O for OGM2 Announce only The DTAM announces Answer On Then plays your selected OGM es az tr Z Z NOTE An outgoing message must be recorded before you can remotely set the DTAM to answer calls e Ifyou do not enter each digit of the security code within 8 seconds the DTAM hangs up If the DTAM is set to answer on it answers according to the number of rings you set The DIAM plays OGM1 33 REMOTE OPERATION REMOTE OPERATION CHANGING THE REMOTE OPERATION SECURITY CODE USING REMOTE COMMANDS The remote operation security code is preset to 798 but you can To use the remote commands you must enter the remote oper change it by following these steps ation security code within 8 seconds after the DIAM answers the call After the DIAM beeps once to verify you entered the 1 Hold down ZZET until the DTAM beeps once A appears code correctly enter the number s for the function s you want the DTAM to perform 2 Press IS again ER security code and the digits of the current code appear in sequence then the first digit reappears a al ely For example when the security code is 798 the display shows 00 Turn the DTAM
13. er all messages have played the DTAM says End of message s and saves all the messages 27 NOLLVaddO OISVE BASIC OPERATION BASIC OPERATION BASIC OPERATION To replay a message while you are listening to it press GED The current message starts again from the beginning To return to the previous message during playback press and hold down GED The previous recorded message plays To skip to the next message during playback press 3 once The next recorded message plays F M E T Oa a 84 aa Weg ES F a a eh E T a i Y Cy aE a Aoa ir ee 2 PAUSE MESSAGE PLAYBACK To pause while listening to messages press GG pause appears on the display To resume playback press again within 60 seconds Otherwise the DIAM beeps once stops playback announces End of message s and displays the total number of messages EE Bor a i Me a j a ee F a oe eS i To Fi J fi FAST PLAYBACK During message playback press and keep holding GLA the message playback speed increases This lets you quickly scan a message or move to any place within a message To resume to normal playback release i To stop playback at any time press the Q The DTAM beeps and resets to answer calls DELETING MESSAGES To delete a specific message press once while the message is playing The DIAM beeps once and deletes the current message then plays the next BEEP v 4 r Ti a p f
14. er hangs up e The maximum message length 60 seconds is reached e There are more than 8 seconds of silence If the DTAM s memory is full appears it will answer the call after 3 rings then play the announcement only message OGM2 If no OGM2 is recorded the DIAM announces Memory is full thank you for your call Please delete some messages to restore normal operation SCREENING CALLS To screen calls let the DIAM answer them then listen to the caller s message through the DTAM speaker If you decide to answer the call pick up the phone and press on the DTAM If you do not want to take the call do not pick up the phone and let the DTAM finish recording the caller s message 26 ADJUSTING THE VOLUME Adjust volume slider on the right side of the DTAM to the desired listening level ED PLAYING MESSAGES The display shows the total number of messages If there are new messages the message light also flashes until all new messages have been played To play all the messages old and new press The DTAM announces the number of messages recorded each message number and the day and time the message was recorded and then plays the message PLAYING NEW MESSAGES ONLY vos ha To play only new messages hold _ down for 2 seconds a p If there are no new messages ee stored the DTAM says You aly SS ox have no new messages Adjust the volume to your desired listening level Aft
15. he 7100A has a generous 18 minute memory capacity NOLDAAONINI PARTS CHECKLIST If any of these items are missing or damaged please contact the place of purchase Fp ap as to AO Nn Telephone cord and Splitter for New Zealand Telephone cord and Splitter for Australia AC Adaptor Operating guide 10 FEATURES YOUR DTAM S FEATURES INCLUDE Superb Digital Record Quality This 7100A DTAM used 4 times the memory and twice the sampling rate of older style DIAMs for enhanced digital recording quality Fast Message Playback Allows quick playback through old long or complicated messages 18 Minutes Digital Record Time No tapes or moving parts to wear out Dual Mgomi Message Lets you choose between playing an ouis ou message then recording the caller s message or just playing an announcement without recording a message And when the DTAM s memory is full it switches automatically to just playing an announcement SAANALVAA Day amp Time Stamp Announces the time and day when each message was recorded Programmable Remote Operation Security Code Lets you set a three digit personal remote operation security code for secure remote operation 11 FEATURES FEATURES Call Screening Lets you listen as a caller leaves a message so you can decide whether or not to answer the call Call Break Through CBT with Programmable Code Alerts you to an important call when the c
16. invalid if the product is A Damaged or not maintained as reasonable and necessary B Modified altered or used as part of any conversion kits subassemblies or any configurations not sold by Uniden C Improperly installed D Repaired by someone other than an authorised Uniden Repair Agent for a defect or malfunction covered by this warranty E Used in conjunction with any equipment or parts or as a part of a system not manufactured by Uniden F Installed or serviced by anyone other than an authorised Uniden Repair Agent G Where the Serial Number label of the product has been removed or damaged beyond recognition STATEMENT OF REMEDY In the event that the product does not conform to this warranty at any time while this warranty is in effect the warrantor at its discretion will repair the defect or replace the product and return it to you without charge for parts and service THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES THIS GUARANTEE IS IN ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR RIGHTS UNDER THE CONSUMER GUARANTEE ACT AINVUYVA WARRANTY CARD If a warranty card has been included with this product then please fill it in and return to us within 14 days of purchase Your name and the Serial number of the product will then be registered in our database and this will help us process your claim with greater speed and efficiency should you require warranty service
17. o set the current day and time NOTE e Adjust Volume Slider on the right side of the DTAM to the desired listening level If you do not complete each step within 8 seconds the DTAM sounds four beeps you must then start again from Step 1 To avoid having to reset the time if AC power is lost we recommend you install a backup battery before you set the day and time 1 Hold down CHED Gi clock Sunday p displays briefly then E the day of the week appears _ on the display the DTAM e announces Sunday A Ta n yf i 4 2 To change the day of the week repeatedly press 3 to move forward or EEE to move backward until the DIAM announces the desired day of the week 3 Press QUEE The DIAM announces the preset hour 4 To change the hour repeatedly press E to move forward or ED to move backward to the desired hour Press QUED The DIAM announces the preset minute To change the minutes hold down 3 to move forward or ED to move backward to the desired minute 7 Press QHD to confirm the settings fillppears The DTAM announces the day and time then beeps i disappears To check the current day time at any time press CHAED Av 19 NOLLWavVdaad PREPARATION PREPARATION RECORDING THE OUTGOING MESSAGES Before you can set the DTAM to answer calls and record messages you must record the outgoing message OGM the caller hears when the DTAM answers a call The DTAM lets you record two
18. off The DTAM beeps and announces Answer Off A EA security code fi EE HE then i reappears z 01 Turn the DTAM on The DTAM beeps and announces Answer on 3 Repeatedly press co or ED to set the first digit then then plays OGM1 If no OGMI is recorded the DIAM beeps m press The second digit appears and announces You have no announcement one E 4 Press CIJ or GED o set the second digit then press 02 Set the DTAM to answer with OGM2 announcement The DTAM az O The third digit appears beeps and announces Announce only then plays OGM2 If no a OGM2 is recorded the DIAM beeps and announces You have no S 5 Press CIJ or CED to set the third digit then press O annoin ne S The DIAM sounds a long beep and announces the 2 Play all messages If no message is recorded the DTAM says security code You have no messages 3 Play new messages When new messages are recorded the DTAM announces the number of new messages before playback If no new message is recorded the DTAM says You have no new messages NOTE Be sure to set each digit within 8 seconds Otherwise you must start B over from Step 1 4 Monitor the room where the DTAM is installed The room is monitored for 20 seconds Press 4 again for another 20 seconds You can repeat this for as long as you like 51 Delete all messages except new messages Press 1 after the DTAM announce Erase messages then the DTAM beeps 34 35 REMOT
19. separate messages and it operates differently based on which message you select see Setting the DIAM to Answer Calls on Page 25 plays the message you recorded and lets the caller leave a message of up to 60 seconds announcement only plays the message you recorded and hangs up without letting the caller leave a message This is useful for announcing information about an upcoming event Be sure the announcement clearly states that the caller cannot leave a message If the DTAM memory becomes full it will automatically switch from OGM 1 to OGM 2 and play that message for any new calls NOTE the maximum length for OGM 1 and OGM 2 is 32 seconds The display counts the recording time Recording the Outgoing Messages aber 1 To record the OGM 1 message atic a hold down eZee p until w the DTAM beeps and GH OE E announcement 1 appears Aog p nT HS in iad 20 PREPARATION NOTE Do not tell the callers that you are not home Instead say that you cannot come to the phone right now To record an OGM 2 message BEEP ce hold down Ze E until the pi DTAM beeps and Ae Announcement 2 appears Tp TF o os f r lt 2 Speak in a normal voice about 20cm 8 inches away from the microphone located on the front of the DTAM If you record the OGM 1 message ask for the caller s name phone number and message 3 When you finish recording OGM1 press The DTAM a automa
20. straightened paper sore A clip to press RESET on the back of fi the DTAM to reset the answering Us y machine e G Y NOTE Resetting the DTAM erases your outgoing messages and all stored information Disconnect the telephone line cord before operating the RESET switch 38 Unplug the unit before cleaning it Clean your unit with a ani never wet cloth Solvent or detergent should never be used as they may damage the finish of the plastic casing Make sure there is space above and to the rear of your unit to allow for proper ventilation Make sure you check your 9V DC battery at regular intervals for leakage Replace when necessary 39 S z 2 s gt Z 40 WARRANTY Uniden 7100A 1 YEAR WARRANTY Batteries and Accessories are covered for 90 Days ONLY Note Please keep your sales docket as it provides evidence of warranty Warranty is only valid in the country where the product has been purchased WARRANTOR Uniden Australian Pty Ltd ACN 001 865 498 Uniden New Zealand Limited ELEMENTS OF WARRANTY Uniden warrants to the original retail owner for the duration of this war ranty its product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below WARRANTY DURATION This warranty to the original retail owner only shall terminate and of no further effect ONE 1 Year after the date of original retail sale This warranty will be deemed
21. tically plays back the outgoing message ii es If no outgoing OGM1 is recorded when you press fEZ 7MB the DTAM announces You have no announcement and sounds four beeps If no outgoing OGM2 is recorded when you press XeL B the DTAM announces You have no announcement two and sounds four beeps 21 NOILLVAVd ANd PREPARATION PREPARATION To play back your outgoing OGM 1 message at any time press GH appears the DTAM beeps and the outgoing message plays To play back your outgoing OGM 2 message at any time press A appears the DTAM beeps and the announcement only message plays PREPARATION A ly 22 SETTING THE NUMBER OF RINGS The ring select switch on the back of the DTAM controls how long the DTAM waits before it answers a call Slide the switch to the desired position 2 The DTAM answers after two rings 4 The DTAM answers after four rings 7 The DTAM answers after seven rings T S Toll Saver If there are new messages the DTAM answers after two rings Otherwise the DTAM answers after four rings This helps you avoid unnecessary toll charges when calling by long distance to check your messages If you hear more than two rings you know you can hang up because the DTAM has no new messages NOTE e When the memory is full the DIAM answers the call and plays OGM2 the announce only message 23 NOILLVAVd ANd 24 BASIC OPERATION SETTING THE DTAM TO A
22. u with loud beeps for 35 seconds Then the DIAM sounds two beeps every two seconds for 30 seconds and one short beep every second for the last 5 seconds To answer the call pick up the handset If you do not answer the caller can leave a message after the outgoing message plays and a long beep sounds NOLLVaddO OISVE CHANGING THE CBT CODE The CBT code is preset to 648 but you can change it by following these steps 1 Hold down until the DIAM beeps once fi appears NOTE Be sure to set each digit within 8 seconds Otherwise you must start over from Step 1 2 Press The DIAM beeps and RA appears followed by the digits of the preset CBT code in sequence then the first digit reappears For example when the security code is 648 the display shows MA E3 HE then EA reappears 3 Repeatedly press EC or EE to set the first digit then press The second digit appears 4 Press LA or GED to set the second digit then press The third digit appears 5 Press S or EE to set the third digit then press The DTAM sounds a long beep and announces the CBT code 31 32 REMOTE OPERATION REMOTE OPERATION You can operate the DTAM from any remote location using a ne phone or from a rotary phone using a pocket tone er Call your telephone When you hear the OGM enter your security code After a long beep enter your remote command code s If you do not hear an OGM the unit is either in Answer off mod
Download Pdf Manuals
Related Search