Home

Toshiba ST-7000-C Series Stereo System User Manual

1. 6 1 6 1 Cleaning 6 1 7 TROUBLESHOOTING 7 1 8 SPECIFICATIONS Hmmm men 8 1 8 1 Basic Specifications 8 1 8 2 Opt ONS 8 2 CAUTION This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC The contents of this manual may be changed without notification Please refer to your local Authorised Service representative with regard to any queries you may have in this manual 1 INTRODUCTION 1 12030 1 1 Accessories 1 INTRODUCTION Thank you for choosing the TOSHIBA POS Terminal This POS Terminal contains all the high performance register function necessary for a POS Terminal and enables the user oriented system configuration By adopting a high speed CPU Memory with large capacity this POS Terminal flexibly accepts the modification corresponding to the future system environment as the user expects This manual describes the functions and handling of this POS terminal and should be read carefully to help gain maximum performance and life from your POS terminal For most queries please ref
2. Be sure to provide an exclusive outlet for the machine as this may cause fire or electric shock Do not insert or drop metal flammable or other foreign objects into the machines through the ventilation slits as this may cause fire or electric shock If the machines are dropped or their cabinets damaged first turn off the power switches and disconnect the power cord plugs from the outlet and then contact your authorized TOSHIBA TEC representative for assistance Continued use of the machine in that condition may cause fire or electric shock Disconnect the plug specified AC voltageis voltage AC specified on the prohibited rating plate as this may cause fire or electric shock Do not place metal objects or water filled containers such as flower vases flower pots or mugs etc on top of the machines If metal objects or spilled liquid enter the machines this may cause fire or electric shock Do not scratch damage or modify the power cords Also do not place heavy objects on pull on or excessively bend the cords as this may cause fire or electric shock Continued use of the machines in an abnormal condition such as when the machines are producing smoke or strange smells may cause fire or electric shock In these cases immediately turn off the power switches and disconnect the power cord plugs from the outlet Then contact your authorized TOSHIBA TEC representative for assistance Safety Sum
3. Excessive vibration Dust Gas Do not subject the machine to sudden shocks Do not press the keys too hard Keys will operate correctly if they are touched lightly Clean the cover and keyboard etc by wiping with a dry cloth or a cloth soaked with detergent and wrung out thoroughly Never use thinner or other volatile solvent for cleaning At the end of the day turn the power OFF then clean and inspect the exterior of the machine Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains interference USE ONLY TOSHIBA TEC SPECIFIED consumables DO NOT STORE the consumables where they might be exposed to direct sunlight high temperatures high humidity dust or gas When moving the machine take hold of the drawer and lift the machine Do not place heavy objects on top of the machines as these items may become unbalanced and fall causing injury Do not block the ventilation slits of the machines as this will cause heat to build up inside the machines and may cause fire Do not lean against the machine It may fall on you and could cause injury Place the machine on a stable and level surface Request Regarding Maintenance Utilize our maintenance services After purchasing the machine contact your authorized TOSHIBA TEC representative for assistanci i once a year to have the inside of the machine cleaned Otherwise dust will build up inside the machines and may cause a fire or a
4. BST 65 to the ST 7000 KIT 7000 2COM QM R Expansion I O PC board that contains two COM ports and a powered USB port 24V KIT 7000 PUSB QM R Expansion I O PC board that contains two COM ports four powered USB ports 12V x 3 and 24V x 1 a MICIN and a LINEOUT NOTE Model name with an R attached to the end indicates that the product complies with ROHS directive 8 2 PRINTED IN JAPAN TOSHIBA TEC CORPORATION EO1 12030
5. TOSHIBA TOSHIBA POS Terminal ST 7000C SERIES Owner s Manual CE Compliance for EU only This product complies with the requirements of EMC and Low Voltage Directives including their amendments WARNING This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Warnung Dies ist ein Klasse A Produkt In einer rtlichen Umgebung kann dieses Ger t Funkst rungen verursachen ATTENTION Ce produit est de classe A Dans un environnement domestique il peut causer des interf rences radio Auquel cas l utilisateur sera amen prendre les mesures ad quates Atenci n Este es un producto de la clase A En ambientes dom sticos ste producto puede causar radio interferencias en cuyo caso el usuario deber tomar las medldas oportunas VERWITTIGING Dit is een klasse A produkt Het gebruik hiervan kan radio interferenties veroorzaken die de gebruiker ertoe kunnen dwigen sommige maatregelen te moeten treffen Avviso Questo e un apparecchio di Classe A In un ambiente residenziale questo apparecchio quo provocare radiodisturbi In questo caso essere richiesto all utilizzatore di prendere misure adeguate Schallemission unter 70dB A nach DIN 45635 ISO7779 FCC Notice This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limit
6. dling of this product For more detailed information about the take back and recycling of this equipment please contact the supplier that provided you with the product in question French Information aux utilisateurs concernant le recyclage des d chets Les informations suivantes sont uniquement destin es aux pays membres de l Union Europ enne L utilisation du symbole de poubelle roulettes barr e indique que ce produit ne doit pas tre trait comme un d chet m nager classique En vous assurant que ce produit est correctement mis au rebut vous participerez la pr vention de l environnement et de la sant publique contre des cons quences n gatives potentielles qui pourraient r sulter d un traitement inappropri des d chets de ce produit Pour obtenir des informations compl mentaires concernant la r cup ration et le recyclage de ce produit veuillez contacter le fournisseur aupr s duquel vous avez achet le produit German Wiederverwertungsinformationen f r Verbraucher Die folgenden Informationen gelten nur f r EU Mitgliedsstaaten Das durchgestrichene M lltonnensymbol weist darauf hin dass dieses Produkt nicht wie allgemeiner Haushaltsm ll behandelt werden darf Indem Sie aktiv mitwirken dieses Produkt ordnungsgem zu entsorgen helfen Sie mit m gliche negative Auswirkungen auf die Umwelt sowie die menschliche Gesundheit zu vermeiden die sonst durch die unsachgem e Entsorgung dieses Produktes bee
7. e nemen met de leverancier van dit product Italian Informazioni sul riciclo del prodotto Le seguenti informazioni riguardano gli stati membri EU Il simbolo con il bidone sbarrato indica il non poter smaltire questo prodotto come rifiuto domestico L accertamento che questo prodotto sia smaltito correttamente contribuira ad impedire le potenziali conseguenze negative per l ambiente e la salute umana che potrebbero essere causati al contrario dall errato smaltimento dello stesso Per informazioni pi dettagliate sulle modalita di resa e riciclaggio di questo prodotto mettetevi in contatto con il fornitore da cui l avete aquistato Portuguese Informac o sobre reciclagem A informac o que se segue apenas dirigida a pa ses membros da CEE A deste s mbolo indica que este produto n o pode ser tratado como lixo comum Ao assegurar se que este produto tratado correctamente est a ajudar a prevenir potenciais consequ ncias negativas para o ambiente e para a sa de humana que poderiam ser causadas pelo inapropriado tratamento deste produto Para mais informac o sobre a reciclagem e tratamento deste produto contacte o seu fornecedor E E Safety Summary EO1 12030 Safety Summary Personal safety in handling or maintaining the equipment is extremely important Warnings and Cautions necessary for safe handling are included in this manual All warnings and cautions contained in this manual sho
8. epending on the Operating System USBO to USB3 are powered USB sockets which are 3 ports of 12V USB USBO to USB2 and 1 port of 24V USB USB3 The lower part of these sockets can be used as general 5V USB connectors A 24 V type drawer is connectable D sub b 9 pin male type connector without power supply A slot scanner modem serial Interface type scale EFT etc are connectable COMS 4 5 6 D sub 9 pin female type connector with 5V 12V output COMB 6 Option A line display unit or RS 232C type hand scanner is connectable NOTES 1 COM6 cannot be used when the touch panel TFT is connected to the POS terminal 2 COME is available only when the optional kit is installed Printer etc having a Centronics interface or equivalent are connectable COME is installed on the PCI slot 4 INSTALLATION PROCEDURE EO1 12030 4 1 Environment for Installation 4 INSTALLATION PROCEDURE 4 1 Environment for Installation 1 Provide a space of minimum 80 mm to the left right front rear and top of the main unit for proper cooling The main unit has air vents on the front rear right and left and a fan Spaces should be provided to prevent the air vents in the main unit from being closed and the air flow from being obstructed 2 Attaching the cable cover The cable cover must be attached to protect the interface cables or connectors Be sure to turn off the power before connecting or disconnecting the cables 3 Notes o
9. er to this manual and keep it safe for future reference 1 1 Accessories Confirm that all the following accessories are contained in the carton If any accessories are missing or damaged contact your TOSHIBA TEC service representative Cable Cover 1 pc Front Panel Key 2 pcs Cable Clamp 2 pcs Used to secure the USB Cable etc to the POS terminal Ferrite Core 2 pcs Ferrite Core 1 pc Ferrite Core 2 pcs For the Drawer Cable For the Audio Cable For the TFT Monitor Cable e Q Bind Unify Screw Double Sems Screw NO 6x4 5 8 pcs M 3x8 2 pcs Used to secure the HDDs Used to secure the Cable Clamp cer a 3 NOTE The power cord is not included in the carton Please prepare it separately from a local dealer 2 APPEARANCE 1 12030 2 lt Front View gt 2 APPEARANCE APPEARANCE Front Panel Lock Front Panel Power LED HDD LED POWER LED HDD LED over Catch Reset Switch CD RW Drive Volume Option Power Switch USB5 Connector 1 Power Switch This is the switch to turn the power of the POS terminal ON or OFF The Power LED is illuminated when turning the power on Power LED Green This is the LED to indicate the power ON OFF status of the POS terminal Green LED is illuminated when turning the power ON HDD LED Yellow This is the LED for a model with the Hard Disk Drive installed Yellow LED is illuminated during the access to the Hard Disk Drive Fr
10. intr chtigt werden k nnten F r n hrere Informationen zur R cknahme und Wiederverwertung dieses Produktes wenden sie sich bitte an den Lieferanten von dem Sie dieses Produkt erworben haben Spanish Informaci n para usuarios sobre el reciclaje de residuos La siguiente informaci n s lo concierne a los Estados Miembros de la UE El uso del s mbolo de un contenedor con ruedas tachado indica que este producto no puede ser tratado como si fuera un residuo dom stico Asegurando que nos deshacemos de este producto de forma correcta ayudaremos a evitar potenciales consecuencias negativas tanto para el medio ambiente como para la salud p blica que podr an producirse debido a un tratamiento inapropiado de este producto Para obtener una informaci n m s detallada sobre la recogida y reciclaje de su producto por favor p ngase en contacto con el proveedor donde lo compr Dutch Gebruikersinformatie over het recycleren van afval De volgende informatie geldt enkel in EU lidstaten Het symbool met de doorkruiste afvalbak geeft aan dat dit product niet mag worden behandeld als algemeen huishoudelijk af val Door dit product op de juiste manier van de hand te doen beschermt u het milieu en de volksgezondheid tegen mogelijke negatieve gevolgen die anders zouden kunnen voortvloeien uit het onjuist verwerken van de resten van dit product Voor gedetailleerde informatie over het terugnemen en recycleren van dit product gelieve contact op t
11. malfunction Cleaning is particularly effective before humid rainy seasons Our preventive maintenance service performs the periodic checks and other work required to maintain the quality and performance of the machines preventing accidents beforehand For details please consult your authorized TOSHIBA TEC representative for assistance Using insecticides and other chemicals Do not expose the machines to insecticides or other volatile solvents This will cause the cabinet or other parts to deteriorate or cause the paint to peel 11 1 12030 TABLE OF CONTENTS Page INTRODUCTION 1 1 1 1 Accessories 1 1 2 APPEARANCE mm 2 1 3 CONNECTORS L LLTMTMeee ly 3 1 4 INSTALLATION PROCEDURE 4 1 4 1 Environment for Installation 4 1 4 2 Attaching the Cable Cover 4 1 5 HOW TO LOCK UNLOCK THE FRONT PANEL 5 1 6 GENERAL MAINTENANCE
12. mary EO1 12030 If foreign objects metal When unplugging the power cords Disconnect fragments water liquids enter Disconnect be sure to hold and pull on the plug the plug the machines first turn off the PODIUM portion Pulling on the cord portion power switches and disconnect may cut or expose the internal wires the power cord plugs from the and cause fire or electric shock outlet and then contact your authorized TOSHIBA TEC representative for assistance Continued use of the machine in that condition may cause fire or electric shock Ensure that the equipment 15 i Do not remove covers repair or i o dify the machine b If onda wire properly grounded Extension Y i modify the machine by yourself x i cables should also be grounded You may be injured high Fire or electric shock could occur on improperly grounded equipment voltage very hot parts or sharp edges inside the machine Unauthorized modification 15 prohibited U T This indicates that there is the risk of personal Injury damage to objects if the machines are improperly handled contrary to this indication Precautions The following precautions will help to ensure that this machine will continue to function correctly Try to avoid locations that have the following adverse conditions Temperatures out of the specification Direct sunlight High humidity Shared power source
13. n installing the display unit on the top of the enclosure When installing the display unit on the top of the enclosure the following conditions must be satisfied Except for the standard display unit 1 Display unit weighing 12Kg or under 2 base of the display unit has no projections that might damage the enclosure 3 The base of the display unit does not protrude beyond the steel plate at the top of the main unit 4 2 Attaching the Cable Cover 1 Insert the guides on both sides of the cable cover into the slits provided on the POS terminal then slide down the cable cover to the bottom NOTE Be sure to attach the cable cover for protecting the cables Guide Slit Cable Cover N 2 When detaching the cable cover hold both sides by hands then pull it up 5 HOW LOCK UNLOCK THE FRONT PANEL EO1 12030 5 HOW TO LOCK UNLOCK THE FRONT PANEL 5 HOW LOCK UNLOCK THE FRONT PANEL lt lt How to unlock the front panel gt gt Front Panel Lock Front Panel 1 Insert the front panel key into the front panel lock and turn it counterclockwise to unlock the front panel 2 Push the upper center of the front panel until it clicks 3 Gently open the front panel holding it by hand lt lt How to lock the front panel gt gt Front Panel Lock 1 Gently close the front panel 2 Push the upper center of the front panel until it clicks Turn the front panel key clockwise to lock the fron
14. not supplied contact your nearest power company e Has the circuit breaker blown e Check the circuit breaker 8 SPECIFICATIONS EO1 12030 8 1 Basic Specifications 8 SPECIFICATIONS 8 1 Basic Specifications o Mem In 100V 240V 10 10 50 60Hz 4 8A 2 3A 100V 240V 10 10 50 60Hz 2 0A 1 0A Relative humidity 10 to 80 RH no condensation Dimensions 315 mm W x 466 mm D x 112 5 mm including the rubber feed and cable cover 9 5 Kg without 2 HDDs CD UPS battery PCI and packing materials Power cord A power cord is not included in this product Please use one complied with each country s safety standard For details please contact the nearest TOSHIBA TEC service representative Intel Celeron 1 2 GHz with 256 KB secondary cache 1MB Flash ROM Capacity Standard 128MB Max 2GB Max 1GB slot can be equipped Type DDR SDRAM PC2100 2 5V unbuffered type non ECC 184 pin DDR SDRAM DIMM connector 2 slots installed Interface RS 232C x 4 Parallel x 1 USB x 1 Drawer x 2 24V type PS 2 x 1 PCI Half size slot x 2 24V OUT DIN 3 pin x 1 Display interface RGB x 1 channel on board standard Hard Disk Drive HDD Max 2 units of 3 5 inch HDD option can be connected CD RW drive 1 drive local purchase is required CD connection kit required option AN interface 10 BASE T 100 BASE TX Wake on LAN support Floppy Disk Drive FDD USB interface type local purchase is required Supp
15. ont Panel Lock This is the lock of the front panel To lock the front panel insert the front panel key to the front panel lock then turn it clockwise To unlock the front panel turn the front panel key counterclockwise Reset Switch Pressing this switch when the POS terminal hangs up resets the unit CAUTION Do not press the Reset Switch unnecessarily Doing so may cause an error Volume Used to adjust the internal speaker volume When it is turned to left the sound volume turns down When it is turned to right the sound volume turns up USB5 Connector Connector for the USB Universal Serial Bus interface conforming to USB V2 0 1 1 A USB Mouse USB keyboard etc can be connected to this connector 2 1 3 CONNECTORS EO1 12030 3 CONNECTORS 3 CONNECTORS Powered USB 24V LINE OUT 24V Power Option Option for Printer COM5 Option Powered USB 12V COMG Option Option MIC Option wmm m ic ce mawo gt I DRW1 K B COM1 COM3 DRW2 AC Inlet A connector for the AC inlet AC power is output in synchronization with the ON OFF status of the POS terminal connected nee for the PS 2 type keyboard USBO 1 2 3 Powered Connector for the USB Universal Serial Bus interface USB V2 0 1 1 and USB Option conforming to Universal Hub Controller Interface V2 0 1 1 NOTE USB functions may not be supported d
16. ort OS Windows 2000 Windows XP DOS D O 8 SPECIFICATIONS EO1 12030 8 2 Options 8 2 Options Drawer unit DRWST 51A 4MV QM 24V drive standard drawer DRWST 51A 8MV QM Size and Weight 460 W x 400 D x 115 H mm 10Kg Money Case Type MC4 8 DRWST 56 EMV QM 24V drive flip top drawer Size and Weight 460 W x 170 D x 100 H mm 6Kg Money Case Type EURO case Drawer type emv am 4 6 1 Yes witnmediasiot emvom 5 8 Yes Wihmediasot 20 characters x 2 lines dot display Printer Unit TRST 56 P 1W QM Parallel interface single thermal printer for 80 mm wide paper Cabinet color FW 2 TRST 56 S 1W QM Serial interface single thermal printer for 80 mm wide paper Cabinet color FW 2 TRJST 52 3S QM Serial interface 2 station thermal printer for 58 mm wide paper TRJST 52 3P QM Parallel interface 2 station thermal printer for 58 mm wide paper POS keyboard 5 50 3 81 keys POS keyboard with PS 2 interface unit TFT monitor TFTST 56T 3V QM 12 1 inch TFT monitor equipped with the touch panel with VGA board Operation Unit LKBST 65 TT11 QM 12 1 inch TFT monitor equipped with the 40 keys keyboard The magnetic card reader is provided as an option Mounting kit KIT 7000 COM QM R COM6 connector kit for attaching the PCI slot KIT 7000 CD QM R Mounting kit for attaching the CD drive KIT 7000 CBL QM R COM relay cable kit for connecting the option TFT monitor TFTST 56T or the operation unit LK
17. s are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own expense Changes or modifications not expressly approved by manufacturer for compliance could void the user s authority to operate the equipment Microsoft and Windows are registered trademarks of Microsoft Corporation Celeron is a registered trademark of Intel Corporation Copyright O 2005 lt For EU Only gt TOSHIBA TEC Europe Retail Information Systems S A All Rights Reserved Rue de la C lid e 33 BE 1080 Brussels 570 Ohito Izunokuni shi Shizuoka ken JAPAN English Waste Recycling information for users Following information is only for EU member states The crossed out wheeled bin symbol is used to indicate that the product must not be treated as general household waste By ensuring that this product is disposed of correctly you will be helping to prevent potentially negative consequences for the environment and human health which could otherwise be caused by incorrect waste han
18. t panel 6 GENERAL MAINTENANCE EO1 12030 6 1 Cleaning 6 GENERAL MAINTENANCE 6 1 Cleaning 1 Be sure to disconnect the power cord prior to performing any maintenance 2 Do not pour water directly on the POS Terminal or wipe it with a soaked cloth as this may cause fire electric shock or machine failure CAUTION Never use an organic solvent like thinners or benzene for cleaning Using such solvents may discolor the covers To help retain the high quality and performance of your POS Terminal it should be cleaned regularly The greater the usage on the POS Terminal the more frequent the cleaning 1 low usage weekly high usage daily e Cleaning the Covers Wipe the covers with a soft dry cloth or soft cloth slightly moistened with mild detergent After using detergent for cleaning be sure to wipe it off with a slightly moistened cloth 7 TROUBLESHOOTING 1 12030 7 TROUBLESHOOTING 7 TROUBLESHOOTING If you cannot solve a problem with the following solutions do not attempt to repair it by yourself Turn the power off unplug the POS Terminal then contact the nearest TOSHIBA TEC service representative for assistance Check poini Solution The power does not e Is power cord plugged in correctly e Plug in correctly turn on e 5 the power supplied to the AC outlet e If it is not a power failure check for the power supply to the AC outlet with another electric appliance When the power is
19. uld be read and understood before handling or maintaining the equipment Do not attempt to effect repairs or modifications to this equipment If a fault occurs that cannot be rectified using the procedures described in this manual turn off the power unplug the machine then contact your authorized TOSHIBA TEC representative for assistance Meanings of Each Symbol This symbol indicates warning items including cautions Specific warning contents are drawn inside the symbol The symbol on the left indicates a general caution This symbol indicates prohibited actions prohibited items Specific prohibited contents are drawn inside or near the C symbol The symbol on the left indicates no disassembling This symbol indicates actions which must be performed Specific instructions are drawn inside or near symbol The symbol on the left indicates disconnect the power cord plug from outlet This indicates that there is the risk of death or serious injury if the machines are improperly handled contrary to this indication WARNING Do not plug in or unplug the Any other than the Do not use voltages other than the Prohibited Ol Disconnect the plug power cord plug with wet hands as this may cause electric shock If the machines share the same outlet with any other electrical appliances that consume large amounts of power the voltage will fluctuate widely each time these appliances operate

Toshiba ST-7000-C Series Stereo System User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents