Home

Speco Technologies 4HD DVR User Manual

1. MAC Address 00 02 69 03 84 fa 74 Setting the Send E Mail This setting is used to automatically send a notification e mail to a specified address when an alarm occurs Memo The DVR will be forcibly restarted if a value on this screen is changed Remote Setup Display Record Device PTZ Control Spot Storage System _ IP Notification Description send E Mail NTP Security Network Send E Mail Transmission Mode Event Alarm Mail Address Mail Server Name ID Password Return Mail Address Send E Mail Sets whether to enable disable e mail sending function IP Notification To send a notification e mail when the DVR IP address is changed check the checkbox Transmission Mode Enables sending image of the channel that triggered the alarm when an alarm event is triggered Event Alarm Sets whether to enable disable sending e mail reports on the channel that triggered the alarm when an alarm event is triggered Mail Address Input the destination address Mail Server Name Input the SMTP server name as well as the user ID and password Return Mail Address Set the source e mail address to be notified to the destination 19 Setting the NTP It allows synchronizing the time using an internet of LAN NTP server Remote Setup Display Record Device PTZ Control Spot storage z System Primary SNTP Server pool ntp org Description Send E Mai
2. speco technologies User Guide ver 1 3 Model DVR4HD 4 Channel HDcctv Digital Video Recorder cctv About This User Guide Prior to installation carefully read the user guide Be sure to keep it handy for future reference Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Explanation of Graphical Symbols This symbol indicates the presence of important operating and maintenance servicing instructions in the literature accompanying the product This symbol indicates the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons WARNING To reduce a risk of fire or electric shock do not expose this product to rain or moisture CAUTION Changes or modifications not expressly approved by the manufacturer may void the user s authority to operate this equipment CAUTION Risk of explosion if battery is replaced by an incorrect type Replace only with the same or equivalent type recommended by the manufacturer Discard used batteries according to the manufacturer s instructions These Precautions Must Be Followed For Safety Reasons MN Warning Do not use if the unit emits smoke strange sounds are heard or odor is emitte
3. Setting the System Client Access To give permission to operate from an external PC by checking the checkbox Bandwidth Saving Sets if the network bandwidth is not large enough when monitoring live videos by checking the checkbox Live videos advance frame by frame At the rate of 1 frame per second DVR ID Sets individual designation to DVRs Date Format Sets the date display format Language Sets the display language Clock Set Set Date amp Time Sets the current date and time D S T SUMMER TIME Sets whether daylight saving is applicable or not OFF Daylight saving not applicable U S A USA daylight saving time applicable EU EU daylight saving time applicable Select the GMT Area 00 00 to 05 00 73 OTHER Sets the start and end dates of the daylight saving period for time zones other than USA and EU Begin End Memo A confirmation dialog is displayed when Apply or ok is clicked if the date and or time settings have been changed The DVR is restarted and the date and time updated when YES is clicked on the confirmation dialog Description To check information on the DVR such as the version information Hemote Setup Display Record Device PTZ Control Spot ps Storage HAA version 0 0 System E SAN Version H105 1743 20090924 Description send E Mail NTP Security Network Storage size 460 GB 471040 MB 1 HDD IP Address 172 16 1 100
4. 16 Site Information Site My Site IP DNS hdcctv Port 5445 ID admin Password 1111 6 After selecting a channel the app will display the following channel 92 My Site My Site M Connecting Notice 3G Data Usage applied without Wi Fi connection Please check with your Phone Carrier 93
5. 57 log s found Save lt Prev Play close Figure 5 2 3 Event Search Screen 1 Select the date of the video to begin searching Use the control button 4 A gt V to navigate through the days 2 Once you have selected the date press SEL to move to the CHANNEL selector 3 Use the control button 4 A P gt V to change the channel selection from ALL to any of the available channels Once you have selected the channel press SEL to move to the TYPE selector 5 Use the control button 4 A gt V to change the type of recording to ALL MOTION SENSOR MANUAL or CONTINUOUS 36 6 Once you have selected the type of recording to search for press SEL to produce a list of instances that fit your search criteria 7 Use the control button 4 A P gt W to scroll through the on screen listings 8 Use the control button 4 A gt W to display a list of events that happened previous to or after the current selection 9 Once the desired event has been selected press SEL to start playing back the selected video 10 Press the BACKUP button to launch the archiving function in playback mode 11 Press the ESC to return to the SEARCH window 5 2 3 Go To First Time You can access the oldest recorded data on the DVR hard drive by selecting GO TO FIRST TIME on the SEARCH window Press the ESC to return to the SEARCH window 5 2 4 Go To Last Time You can access the latest recorded data on the DVR hard drive by selecting
6. au gt uy 1 anaes CH01 155702 CHO2 155702 CHO3 155702 CHO4 155702 Figure 7 4 1 HD Player 43 8 Upgrading Firmware In order to upgrade the firmware upgrade file must first be downloaded and copied into the USB flash drive Create a new folder in the USB flash drive and name it upgrade Copy the firmware upgrade file into the upgrade folder NOTICE The folder on the USB flash drive must be named upgrade After the firmware upgrade file is copied into the USB flash drive connect the USB flash drive to the USB port on the front panel and do the followings Extra the Firmware Files into the upgrade folder in the USB flash drive Power Off the DVR and insert the USB flash drive into the DVR Power On the DVR with the USB flash drive insert into the DVR DVR will prompt Upgrading logo when the firmware is being upgraded ee IE Upgrading speco technologies 5 Once the upgrade is completed the DVR will reboot speco technologies 44 9 Network Access Using the Single Site Network Viewer The DVR provides a live remote monitoring feature Remote monitoring requires installation of the network viewer on your PC NOTICE In a high bandwidth network a maximum of four users can access one DVR simultaneously In a low bandwidth network it is recommended that only one user access the DVR at a time 9 1 PC Requirements CPU Intel Pentium IV 1
7. dad AWA K e LOG Select to save event log into log file e ICON Select to display the event on live video e EVENT LIST Select to show the event in the Event List window of live mode Search and check the recorded log data 93 General Site From First 2009 09 16 2 12 00 00 First 2009 09 16 ZA 12 00 00 ven To T ssl 2009 09 16 Mi 2S 1 18 03 5 E Event search amp Record Path CAStorageiLog E Disk i About m Event Date T ime Startup 2009 09 16 13 07 55 Setup Change 2009 09 16 13 12 22 Setup Change 2009 09 16 13 14 12 Setting Record Set the recording conditions and select channels to record General Record Condition M nt Always O Event C Auto record E Event search Event SY Record Motion Alarm Duration E Sec Disk Channels CH Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel Channel 8 Select the local disk to use and the amount of disk space you want to allow the program to use for recording General Ka pace ici w 1024 Mb MAX 10Gb E Event search Disk Info A Record Total space 38 Gb Free space 3 Gb Disk full Replace oldest files Stop recording 94 10 Network Access Using the Multi Sites Network Viewer 10 1 Installing the Network Software 1 Insert the provided CD in the CD drive and double click SpecoTech_HDcctv_Multi
8. 4Ghz or higher Memory 512MB 1G or higher is recommended VGA memory 16MB 64MB or higher is recommended Resolution 1024x768 O S Windows 2000 XP Professional XP home Direct X DirectX 8 1 or higher 9 2 Installing the Network Software Double click SpecoTech_HDcctv_Single_Client XXXX exe int the provided CD 2 Select a destination folder and click Next InstallShield Wizarc Choose Destination Location Select folder where Setup will install files Setup will install SpecoT ech Client in the following folder To install to this folder click Next To install to a different folder click Browse and select another folder Destination Folder CA ASpeco Technologies SpecoT ech Client Browse InstallShield Wizard Select Program Folder Please select a program folder Setup will add program icons to the Program Folder listed below You may type a new folder name or select one from the existing folders list Click Next to continue Program Folders SpecoT ech Client Existing Folders Administrative Tools avast Free Antivirus AviSynth 2 5 Canon Printer Uninstaller Catalyst Control Center CMS lt Back Next gt Cancel 4 The setup status screen is displayed InstallShield Wizard A x Setup Status fe A SpecoTech Client Setup is performing the requested operations Installing EA Speco Technologies S pecol ech Client HO Player exe Cancel After the ins
9. C Storage Backup Security Option Miscellaneous Y Display network statistics Y Automatic reconnection Time format YYYY MM DD cancel Setting General Set the Security Option Save Path and Miscellaneous e Security Option Set a password for security options When you access any of the selected functions you will need to enter the password e Save Path Specify the location to record for backup and still image capture e Automatic reconnection l a user selects this function the client S W will automatically try to connect to the previously connected IP address if the network connection is lost 92 e Display network statistics If a user selects this function the client S W will display network status Bit rate and Frame rate e Time Format Change the mode the Client software displays the time Setting Site The remote DVRs can be added modified and removed mdd CUE Down Site Event N Name IP Address Port No E Event search A Record E Disk About Setting Event Set the record path and the size of local disk space for the log files E General Log site Path CaStoragelLog mm Em E Event search Sre 10 MB MAX 1 00MB A Record E Disk Event About Startup 3 Shutdown Setup Change Sensor in UE Alarm out amp Motion SN Camera loss a Network loss E Record Event list o Io 5 ga g a g aae Ex a E E
10. CHANNEL NAME E RECORD CHANNEL RESOLUTION FRAME RATE QUALITY RECORDING SENSOR RECORDING PRE RECORD POST EVENT RECORD AUDIO SCHEDULE m DEVICE ALARM OUT PTZ CHANNEL MOTION ZONE MOTION SENSITIVITY KEY TONE REMOTE CONTROL ID SENSOR TYPE E STORAGE OVERWRITE DISK FORMAT DISK INFO RECORDING LIMIT S M A R T E SYSTEM DVR ID DESCRIPTION LANGUAGE DATE FORMAT 15 SET DATE amp TIME NTP SEND EMAIL E SECURITY USER AUTHENTICATION USER PASSOWRD NETWORK m CON PORT WEB PORT NETWORK TYPE DHCP STATIC DNS DDNS CLIENT ACCESS NETWORK STREAM FIG SAVE SETUP TOA USB LOAD SETUP FROM A USB LOAD DEFAULT LOAD FACTORY DEFAULT E QUICK SETUP INPUT DESIRED DAYS 16 3 2 Setup Display Mode Press the SETUP button and enter the password The setup menu is displayed as picture below Select DISPLAY icon and press SEL button to enter the setup menu item Navigate through the menu items using the control button 4 A gt W and change the value of the menu item using the control button 4 A gt VW To return to setup menu screen press the ESC button RECORD DEVICE STORAGE SYSTEM SECURITY NETWORK CONFIG QUICK SETUP Figure 3 2 1 Display Mode Setup Screen Table 3 2 1 Menu Items in DISPLAY Mode Setup Item Description OSD Enable disable on screen display Select ON show it on the screen Select OFF Disappear on the screen SEQUENCE Enable disable sequential di
11. Disk Motio AFIT Duration a OSD About Channel Site V All site v An NO CH 1 Channel 1 2 Channel 2 3 Channel 3 4 Channel 4 5 Channel 5 6 Channel 6 10 4 3 2 Record Local Storage Setup You can select the local disk to use and the amount of disk space you want to allow the program to use for recording You can also select the option to overwrite data or stop recording when the maximum amount of disk space is full E General Eveni Disk Space TT y Event search SB Record Disk Info bed Dis Total space 195 Gb About Free space 111 Gb Disk full Replace oldest files Stop recording 64 10 4 4 OSD You can select the OSD to be display General Event te v All site Event search A Record Info Event E Disk Display network statistics _ Alarm OSD _ Date Time C Motion About Sensor Record Video Loss 10 4 5 About About provides network client version information General Event SPECO Multi Client Version 3 0 3 2 Build 110120 ES Event search T BA Record Copyrigth C 2011 _ bd This product licensed to E Warming this computer program is protected by copyright law and international treaties Unauthorized reproduction or distribution of this program or any portion of it may result in severe civil and criminal penalties and will be prosecuted to the maximum extent
12. GO TO LAST TME on the SEARCH window Press the ESC to return to the SEARCH window 5 2 5 Go To Specific Time You can search for video data from a specific instance by setting the date and time in the GO TO search window Use the control button 4 A gt W to move through the date and time values in this menu Use the control button 4 A gt W to change the date and time value Move the cursor to OK using the control button lt A gt V and press the SEL to playback the recorded video 5 2 6 Log Search You can access the LOG list search screen by selecting LOG on the SEARCH window Select a date using the control button 4 A gt V and press SEL to open the LOG list from that date 5 2 7 Archive Search The ARCHIVE Search window is used to find previously stored video or images 1 Select the date to begin searching and navigate through the days using the control button 4 A gt vV 2 Once you have selected the date press SEL to open the list of stored data Use the control button 4 A gt V to scroll through the on screen listings Use the control button 4 A P W to display a list of stored events that happened previous to or after the current selection 5 Once the desired event has been selected press SEL to view the still image or the first frame of the selected video Press the BACKUP button to launch the archiving function in playback mode Press the ESC to return to the SEARCH window 3 5 3 Play mode During playback
13. HD 30fps Network Streaming RTP RTSP RTCP Protocols HTTP DDNS NTP SMTP Interface SATA e SATA T U U Storage Max Capacity of HDD 2TB Max Internal HDDs 4EA External Storage 1 e SATA SMART HDD Error Check and Reporting Menu Display Graphic User Interface User Interface Input Method Mouse Remote Controller Option and Keypad PC Client Live Search Playback Backup PTZF Camera Control Network Access Live Search Playback Backup PTZF Camera Control Internal Beep By Alarm Motion Video Loss HDD Error Software Upgrade By USB Network Remote Upgrade TBD Features Watermarking Yes TBD 3G Mobile Phone Viewer iPhone Android Operation Condition 0 40C Humidity 20 80 General Net Weight Gross Weight 6KGS 9 5KGS 13 2LBS 20 9LBS Unit Dimension W x D x H 417mm x 432mm x 99mm 16 4 x 17 x 3 9 Specifications are subject to change without notice Table of Contents 1 4 5 Name and FONCION muari eia e ace oa teh dl no e bo el eb ech aus 11 A A 11 CONNEC Nai 13 Senn UP TIE DVA einant ee ee ee ae ee ee ee eee ee eee 14 OP hg DO MIO A EE EEA EE A aca sateen auction cae ATE EIE TE N A E E AEAT AEE 14 3 2 CU SS AM o e io 17 3 9 Setup Recording Mod it id A A N 17 3 31 Recording Schedules Aida 19 94 Sel Device MOOG taria ibid 20 O 8 gee rere mi RT ee a Oe ee re 21 34 2 PIZ SUD AE 21 3 49 Molon ZONE SEUD iaa aida 22 F CUPE rade 1019 A A o A A A 23 SO A o O 25 E A 27 3 9 CU NEIW
14. Multi Client Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 SPECO Multi Client SPECO Multi Client SPECO Multi Client SPECO Multi Client Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 SPECO Multi Client SPECO Multi Client SPECO Multi Client SPECO Multi Client Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 MTWTF siR 2 3 48 E 9140 1112 SPECO Multi Client SPECO Multi Client Ses n gt gt SPECO Multi Client Ver 3 0 3 2 Ver 3 0 3 2 o eS Ver 3 0 3 2 a Z 7 2011 02 11 13 41 09 2011 02 11 13 41 09 SPECO Multi Client SPECO Multi Client SPECO Multi Client SPECO Multi Client Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 SPECO Multi Client SPECO Multi Client SPECO Multi Client SPECO Multi Client Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 Ver 3 0 3 2 SPECO Multi Client SPECO Multi Client SPECO Multi Client Ver 3 0 3 2 14 15 16 17 18 1 21 22 23 24 25 26 7 TERETE E 2 Select site to connect from the directory window 3 Click window NU E SB Ge A E 7819 110 11 42 43 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Ze eo h0410e 3 p IP 192 168 1 h0410e 4 p IP 192 168 1 DNS ps 1612 1 A IP 192 168 ag a de Ps 1612 2 IP 192 168 1 PS 1612 3 IP 192 168 1 06 10 2009 13 00 29 e eee 88 10 6 6 AVI Backup during playback You can back up the recorded videos in AVI format during playback 1 Double click the target channel
15. control bar to set the micro phone MIC level User can control PAN TILT amp ZOON FOCUS fils d P PAN left right de W TILT up down a ZOOM in out FOCUS in out Gi Preset 9 To select the numbers of display channel channels Single quad 9 channels and 16 channels of highlighted site CHANNEL SPLIT To select the numbers of DVR DVRs 1 DVR 4 DVRs 9 DVRs 16 DVRs on main display screen DVR SITE SPLIT 10 3 Search and Playback Window 10 3 1 Main user interface You can access to search window by clicking the search icon Local Playback Remote Playback on the O upper left of Live Window Dl If the software prompts for a password enter the password as below Security Enter password If you found this window then should have to setup the password at the setup menu Click this button EN and click the password icon as bellow General Event Event search a Record Y Local Playback E Disk OSD About Security Option Startup Save Path Capture C Storage Capture Backup C Storage Backup am Miscellaneous Z Automatic reconnection F Always On Top Time Format YYYY MM DD m Password Cancel Insert new password and confirm password 98 Password Change Old Password Mew Password Confirm Password Cancel Speco Dem IP 192 168 1 HD04105 IP 192 168 SPECO Multi Client Ver 3 0 3
16. of DVR sites coccccoccccocncocnccccnccocnconnncanononos 80 10 62 Connect ana DISCONMEC 1 a a O O 82 10 6 3 Still image capture during LIVE c oooccccccccccnccocnconnnconnnonnnnnonononnconnnnonnnnnnnnnnos 84 10 6 4 Recording video on local PC during Live ooccocccccncccncccncconoconocononanonanenonos 85 10 6 5 Local Playback and Remote Playback oooccoocccoccccoccconcononcconcnconcnnnncnoncnnnnos 86 10 6 6 AVI Backup during playback ocooccoocccocncccncccnoconoconocononononanonanonanonanonanenanes 89 11 Network Access Using the 3G App Viewer eiciia a E a EE Ea 91 1 Name and Function 1 1 Front Panel The following information will help you to operate the front panel controls gt ____________________zz_z_______z______________________________JJJJIJ33 gt gt A AAA A A A Fa E gt H RECORD O ALARM NETWORK BACKUP Fa E E wi fe WF PR HI NAS MANN Ni 1748 NY W ie AN h 4 se tip LIA YA i f J SY VJ jj ARS UL W Af L D ES A SEY i J i lt Figure 1 1 1 Front panel Table2 1 1 Indication lamps Name Desorption OO LED light is on when power is applied to the system POWER j us Green Power On Orange Power Off HDD LED light is on when the system is recording video data ALARM LED light is on when alarm se
17. server name ID and password using a virtual keyboard 30 3 9 Setup CONFIG Mode Press the SETUP button and enter the password The setup menu is displayed as picture below Select CONFIG icon and press SEL button to enter the setup menu item Navigate through the menu items using the control button 4 A gt V and change the value of the menu item using the control button 4 A gt V To return to setup menu screen press the ESC button SETUP DISPLAY RECORD DEVICE STORAGE SYSTEM SECURITY NETWORK CONFIG QUICK SETUP SAVE SETUP TO A USB LOAD SETUP FROM A USB LOAD DEFAULT LOAD FACTORY DEFAULT Figure 3 9 1 Config Setup Screen Table 3 9 1 Config Setup Item Description SAVE SETUP User can save the current configuration Setting values of DVR to the USB TO A USB flash drive Put the USB stick on the front panel and press SEL to start the Saving process LOAD SETUP User can upload the configuration of DVR to another DVR using the USB FROM A USB Flash drive Put the USB stick on the front panel and press SEL to start the loading process LOAD Select ON to reset the system to the default settings DEFAULT The follow settings such as Language DVR ID Security User Authentication Security User P W Date format DLS settings Network settings HDD serial number and HDD ERROR time will not be included LOAD Select ON to reset the system to the factory default settings FACTORY DEFAULT 31 3 10 Setup QUI
18. setup menu screen press the ESC button SETUP m DISPLAY RECORD DEVICE STORAGE SYSTEM SECURITY PNE CONFIG QUICK SETUP A 92 168 1 22 55 255 255 0 92 168 1 1 168 126 63 1 DNS 168 126 63 2 DDN FF CLIENT ACCESS NETWORK STREAM Figure 3 8 1 NETWORK Setup Screen Table 3 8 1 Menu Items in Network Setup Screen Item Description PORT Port number Default 5445 WEB PORT Web Sever Port number NETWORK TYPE Select a type of network connection Options are DHCP and STATIC Note Other parts of the network setup screen change depending on what network type you select DHCP DVR automatically get IP varying from time to time from network and does not therefore need to be set 28 STATIC Assigned to an Internet service provider ISP to be its permanent address on the Internet DDNS Enable disable using domain name address through DDNS server ON mode DDNS server name appears for domain registration DDNS SERVER NAME The DDNS sever name is bestddns com CAUTION Do not change this sever name If this is changed the DDNS service cannot be available DDNS INTERVAL Set the connection interval 5 60minutes 3 8 1 Ports When you connect one or more DVRs to a network through an IP sharing device each device must have a unique TCP port number for access to each unit from outside the LAN Also the router must be configured for port forwarding so when each port is accessed on th
19. the duration of the event recording Schedule Sets the schedule for schedule recording 10 5 3 Device Select Device to set the sensor input alarm output conditions PTZ control and spot setting conditions Remote Setup Display Record Sensor ID PTZ Control Spot Sensor Type storage H System security Network CH 1 Sensor Motion Zone 3 Motion Sensitivity Alarm Out CS sensor In Motion ON Video Loss On Y Alarm Duration 5 SECONDS Error Alarm Bi Remote Controller Setting a Sensor Input Terminal Specify a sensor input terminal number and set the type Setting the Motion Zone Sensitivity Select the zone where the motion sensor Is active It is necessary to set a detection frame when PARTIAL ZONE is selected Select the level of detection sensitivity of the motion sensor Sensitivity selections 1 9 High sensitivity level Partial Zone If selecting Partial Zone a button is displayed to the right Click the button and click or drag a grid cell in the desired detection frame Setting an Alarm Output Terminal Specify an alarm output terminal number 1 4 and set the alarm output conditions Alarm Out No Specifies the alarm output terminal number 1 4 69 Sensor In Outputs an alarm signal when the specified external sensor input terminal receives an input Motion On Outputs an alarm signal when the specified video input terminal receives a motion detection signal Video Loss
20. the value of the menu item using the control button 4 A gt V To return to setup menu screen press the ESC button gt SETUP DVR ID DESCRIPTION LANGUAGE DATE FORMAT NTP SEND EMAIL 5 7 DISPLAY RECORD DEVICE STORAGE SYSTEM SECURITY NETWORK CONFIG QUICK SETUP SET DATE amp TIME Figure 3 6 1 SYSTEM Setup Screen Table 3 6 1 Menu Items in SYSTEM Setup Screen ltem DVR ID Description Press the SEL button and select DVR ID using the control button 4 A gt V and press SEL button Press OK to apply the selected DVR ID SPACE Caps Lock Select either Capital or Lower letter BS Back space Erase previous character Clear Erase all characters DESCRIPTION Press SEL button to view system information Hardware version Software version Storage size IP address and MAC address 77 DESCRIPTION HARDWARE VERSION 2 1 0 Ver 2 1 3 18 45 01 26 2011 LANGUAGE Select the display language using the control button 4 A P gt V Once a language Is selected the display language changes DATE FORMAT Select the date display format using the control button 4 A gt V Options are YYYY MM DD MM DD YYYY DD MM YYYY 20 SET DATE amp TIME Move the cursor to the display date and time using the control button lt A gt V and press SEL button to set the present date and time Press ESC button to return to SET DATE amp TIME setup menu In order to set DAYLIGHT SA
21. 1 02 11 19 39 00 Figure 5 2 2 Time Line Search 35 1 Select the date of the video to begin searching and navigate through the days using the contro button 4 A gt V 2 Once you have selected the date press the SEL button to move to the time line search window 3 Use the control button 4 A P gt W to select a time zone on the 24 hours time table 4 Select All or a specific channel to search video clip on the time line bar using the control button lt A gt V 6 Once you select the channel use the control button 4 A gt V to move to the point you wish to start playing the video clip 7 Once you have selected the time zone press the SEL button to playback the recorded video 8 Press the ESC to return to the SEARCH window 5 2 2 Event Search The Event Search window is used to find stored video Three categories of search filters can be applied DATE CHANNEL and TYPE Press SEL to select a value and move down to the next category and use the control button lt A gt V to move up to the categories you have previously entered The ESC button will return the user to the previous screen SEARCH ENT CH1 CH2 CH3 CH4 ma Event MOTION SENSOR MANUAL CONTINUOUS m L Channel Log Date A CONTINUOUS 2011 02 13 07 00 01 CONTINUOUS 2011 02 13 07 00 01 CONTINUOUS 2011 02 13 07 00 01 CONTINUOUS 2011 02 13 08 00 01 CONTINUOUS 2011 02 13 08 00 01 CONTINUOUS 2011 02 13 08 00 01 CONTINUOUS 2011 02 13 09 00 01
22. 189 24 main user interface DISCONNECT Disconnect network connection 3 LIVE Switches the search mode to live mode mie Live CAPTURE Capture a still image from live screen FA 49 mu Set the start time for video backup MARK OUT Set the ending time for video backup e Mark out BACKUP Backup the selected recorded video as AVI format SEARCH The calendar shows dates with recorded CALENDAR video in a light blue and the selected date in dark blue 4 Oct 2010 gt SM TWHiI 2 4 amp y gt 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 TIMELINE BAR The timeline shows recorded data in dark ES ee ine ee PLAYBACK The playback buttons a i CHANNEL Show on the screen that you select SELECT 0 60 EEE SPECIFIC TIME Select Specific Time with Hour or Minute Searching and Playing Video in the Remote DVR Video recorded in the remote DVR or Video recorded on the PC can be searched and played back 1 Connect the network to the remote DVR and press SEARCH button Then the mode is changed T from the live mode to the search mode EQ Search e Searching the video recorded in the remote DVR Connect the network to the DVR e Searching the video recorded in the PC Do not connect the network to the DVR 2 Select the date to search the video 90 3 4 Feb 2010 a O a 2 4 45 6 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 2T 28 Drag the slid on
23. 2 Click this icon to run a playback window to search and play videos that are recorded in local PC Click this icon to run a playback window to search and play videos that are recorded in remote DVR REMOTE PLAYBACK 59 a AA Directory window shows site sites that are pre registered a sam h0410e 2 IP 192 168 1 h0410e 3 IP 192 166 1 hO0410e 4 IP 192 165 1 Click this icon to connect the selected site sites SS CONNECT Click this icon to disconnect the selected site sites DISCONNECT Lib SETUP Click this icon to setup configuration of UMS MULTI CLIENT Bs CAPTURE Click this icon to capture a still image mii EN 22d EVENT LIST e Click this icon to set the beginning time for backup of the MARK IN recorded video in AVI format Ya Click this icon to set the ending time for backup of the recorded MARK OUT video in AVI format EN Click this icon to backup the recorded video in AVI format BACKUP e a Aupio Use the volume control bar to set the audio level To select the numbers of DVR DVRs 1 DVR 4 DVRs 9 DVRs 16 DVRs on main display screen DVR SITE SPLIT ajaja To select the numbers of display channel channels Single quad 9 channels and 16 channels of highlighted site CHANNEL SPLIT g To select the channel to playback 60 The calendar shows dates with recorded video in color To display the recorded data of selected channel or all channels on a
24. CK SETUP Mode User can easily recording setup just select desired day days to record then DVR will automatically calculate recording setting value DEVICE STORAGE SYSTEM SECURITY NETWORK CONFIG JUICK SETUF i i i i 1280 x 720 10 FPS CONTINUOUS 10 days 13 hours RESOLUTION 320 x 180 FRAME RATE 30 FPS AL OUALITY ECONOMY HIGH 4 Saving Setup To preserve the setup values that you have changed select YES 32 5 Live Search and Playback 5 1 Live Viewing Screen In the Live screen video inputs from the cameras are displayed as they are configured in the Display Setup screen Various on screen display OSD symbols which indicate the status of the DVR are described in Table 5 1 1 CH 1 CH2 NO VIDEO NO VIDEO CH3 CH4 NO VIDEO NO VIDEO 02 13 2011 18 55 55 RIC ALL O Figure 5 1 1 Live Viewing Screen Table 5 1 1 Status Indicator Icons in Live Screen Icon Description PAT ses BEL REE Displays the current date and time Remote control ID display If no remote ID is set the message R C ALL ia ALL is displayed Displays the amount of recording on the hard disk from 0 100 Table 5 1 2 Button Functions in Live Viewing Screen Button Dpto Select channel to be displayed in full screen mode Switch between full screen and quad display mode SEQ Press to start auto sequencing of the screen in full screen mode Toggle RECORD Press to start a
25. ON button And then the following window displays Site Addition Site Info Type Site Name Site Address Port Number 5445 ID Password o Type Choose the product type o Site Name Input a name that properly describes a site o IP Address Input IP address Public IP address of a router that DVR is connected or Domain name that is registered at www ddnscenter com o Port No Input port number of DVR o Password Input network password of DVR o Channels Select the channels number of DVR 2 Click OK button And then the registered site is added on the directory window Ly SSRs Ly 5 h0410e 1P 192 168 gp y IF 192 168 0 a F IP 192 168 p 80 10 6 1 2 Delete of Sites 1 Select the site sites to delete from the directory window e y e NECIOTE EA AAA O dd E h0410e 2 P IP 192 168 ME h0410e 3 F 1P 192 168 1 2 Click a i ae TT o Ep EMB ES T DEE E h0410e 2 a IP 192 168 1 if h0410e 3 ES Er IP 192 168 1 e gt y E h0410e 4 F IP 192 168 1 e 10 6 1 3 Modify of Sites 1 Select the site sites to modify from the directory window e a ar ur Y de v Li PEED gt o l 83 6 grs ES B ho4ioe 3 F IP 192 168 1 os Di h0410e 4 ge IP 192 1681 2 Click SITE MODIFY button And then the following window displays Net Finder Site Modify E 1 sa P 1 Site Info Name Address Address Base Port Mac Mo
26. On Outputs an alarm signal when a video loss occurs in the specified video input terminal Alarm Duration Sets the duration of the alarm output signal Error Alarm Sets whether to output or not an alarm signal when the error condition occurs Options are OFF ALL HDD ERROR and VIDEO LOSS Remote Controller Sets an ID number on the supplied remote control for its identification Hemote Setup Display Record Device poa Spot storage H System security Network Protocol AP8777 PTZ Control CAMERA SPEED 9600 Camera ID Setting the PTZ Control Sets the communication environment for remotely operating PTZ dome cameras connected to RS485 terminals Camera Channel Designation Camera Speed Sets the communication speed The set value applies to all channels Protocol Sets the protocol type for the specified channel When connecting multiple cameras set the same protocol for all Camera ID Sets the camera ID 70 Remote Setup Display Record Device PTZ Control Storage Spot On Event Spot Type System Security Spot Event Dwell Time 4 Network iaa Sequence Sequence Dwell Time 4 Spot Channel Setting the SPOT Sets the output conditions of the spot video terminal Spot Type Sets the output screen layout of the spot terminal Spot On Event Sets whether to output or not the video of a sensor recording to spot while it is being recorded Spot Event Dwe
27. PTZ Control Spot Storage Port 5445 WiebPort 5440 System Description Network Type LAN Send E Mail NTP IP 172 Security Network a 472 Network Subnet Mask 255 1st DNS 0 2nd DNS 0 DDNS a Port When connecting multiple DVRs to the network set a unique port number to each DVR Web Port Set a web server port number Network Type LAN The address setting mode is manual Input IP Gateway Subnet Mask and DNS server IP DHCP The address setting mode is automatic Addresses and other information do not need to be set ADSL Input the login ID and Password DDNS Sets whether to use DDNS service or not 78 10 5 8 Network Dual Stream Select Dual Stream to set frame rate and quality for a network streaming Remote Setup Display Record Device Storage System 1 CH 2 CH 3 CH 4 CH Security Frame Rate rus vw Tis w rus vw sts gt Network Quality STANDARD Y STANDARD STANDARD Y STANDARD bl DuabStrearn 5 CH 6 CH T CH a CH Frame Rate 2 fis 2 Ts 2 fis 2 Ts Quality ULTRA ULTRA JULTRA lULTRA User can set to the following values 4ch 1 2 3 7 10 12 and 15fps 1 2 3 6 8 9 and 12fps Quality Standard High Ultra Standard High Ultra A 79 10 6 Operation 10 6 1 Addition Delete and modify of DVR sites 10 6 1 1 Addition of sites 1 Click E SITE ADDITI
28. SPLAY RECORD DEVICE MSTORAGE SYSTEM SECURITY NETWORK CONFIG QUICK SETUP OVERWRITE m DISK FORMAT eve DISK INFO RECORDING LIMIT RECORDING LIMIT DAYS S M A R T Figure 3 5 1 STORAGE Setup Screen 23 Table 3 5 1 Menu Items in STORAGE Setup Screen ltem OVERWRITE Description When enabled the DVR will continue recording and overwrite the oldest existing recorded data once the hard drive is full When disabled recording will stop once the hard drive is full DISK FORMAT In order to use HDD format gt DISK FORMAT Waming Will you format HDD if yes all the data will be erased from HDD if the data is to be kept select NO WO DISK INFO Hard drive information DISK INFO HDD SIZE 870 GB FREE 602 GB HDD START TIME 2011 02 11 19 13 00 HDD LAST TIME 2011 02 13 18 52 00 Health Power On Time Good Normal Bad Om 32 bows j S RECORDING LIMIT Enable disable recording limit RECORDING LIMIT DAYS Set the recording limit days 1 90 days S M A R T Enable disable alert function for HDD temperature Imit 2 S M A R T SETUP TEMPERATURE LIMIT ALARM i ER P A ee a 24 3 6 Setup System Mode Press the SETUP button and enter the password The setup menu is displayed as picture below Select SYSTEM icon and press SEL button to enter the menu item Navigate through the menu items using the control button A gt V and change
29. Tech Multi Client icon on your desktop to start the program 10 2 1 Main user interface O RS Speco Demc El IP 192 168 3 HD0410S E IP 192 168 2 SPECO Multi Client Ver 3 0 3 2 AS a 008 E Click this icon to run a playback window to search and play videos that are recorded in local PC LOCAL PLAYBACK Click this icon to run a playback window to search and play videos that are recorded in remote DVR REMOTE PLAYBACK 96 O LG EE THUMBNAIL REFRESH Click this icon to refresh and renew thumbnail image of every connected site pr a SITE ADDITION Click this icon to open Site Addition pri a ae J window IP 192 168 i cn E SITE DELETE Click this icon to delete site from the index SE _ aS tea oh eet window after disconnect a site peo IF 192 100 d ea nae ES SITE MODIFY Select the site from the index window and PS 1612 2 click this icon to open Site Modify window IP 192 168 1 SITE MANAGEMENT Click this icon to connect the selected site sites CONNECT il ta Click this icon to disconnect the selected site sites j wi SETUP Click this icon to setup configuration of UMS MULTI CLIENT GA CAPTURE Click this icon to capture a still image 11 PAUSE Click this icon to play pause live video Enable or disable recording of live video to local disk which has RECORD ON set in setup menu 9 a E AUDIO Use the volume control bar to set the audio level Use the micro phone volume
30. VING select your DLS zone from USA EU or OTHER SET DATE amp TIME CLIENT ACCESS Enable Disable remote access through network client software BANDWIDTH Enable Disable only key frame transmission ON mode is favorable for SAVING use of low network bandwidth Mostly set OFF for normal use NTP NTP is an abbreviation for Network Time Protocol which is for synchronizing the clocks of computer systems over variable latency data networks SEND MAIL PRIMARY SNTP SERVER Input the address of the primary NTP time server SECONDARY SNTP SERVER Input the address of the secondary NTP time server TIME ZONE Greenwich Mean Time GMT is a term originally referring to mean solar time at the Royal Observatory Greenwich in London Because NTP synchronizes with Greenwich Mean Time GMT regardless of geography users must set their own time difference Ex KOREA GMT 09 00 CONNECTON MODE Select NTP time server connection mode CONNECTION PERIOD 1 24 NTP E PRIMARY SNTP SERVER a SECONDARY SNTP SERVER y TIME ZONE CONNECTION MODE CONNECTION PERIOD 26 3 7 Setup Security Mode Press the SETUP button and enter the password The setup menu is displayed as picture below Select SECURITY icon and press SEL button to enter the setup menu item Navigate through the menu items using the control button 4 A gt VY and change the value of the menu item using the control button lt A gt V To r
31. WN pan LEFT RIGHT position using the control button 4 A gt V ZOOM FOCUS Select ZOOM FOCUS using the control button A gt W and press SEL button Adjust the zoom UP DOWN focus LEFT RIGHT position using the control button 4 A gt V INITIALIZE Initialize the PTZ settings of the selected camera PRESET Select the PRESET and press the left key 4 on the control button Then number input window will appear Set the number 3 digits using the number key and press the SEL to set the preset number for the current position Press the right key on the control button and set the number 3 digits to go to the preset number TOUR Select the TOUR and press the right key P on the control button Then number input window will appear Set the number 1 digit using the number key and press SEL to make the group number work Press the left key 4 on the control button to stop tour 39 User can set the preset number in the tour group of the OSD menu OSD Select the OSD to enter the menu Control keys are Right Left UP Down Select Far REW KEY and Near FF KEY Press the ESC button to return to the main menu Press the PTZ button to escape from the OSD menu AUTOSCAN Press the right key on the control button to start auto scan Press the left key 4 on the control button to stop auto scan PTZ Press the PTZ button to escape from the OSD menu ESC Press the ESC bu
32. WOK MOGE ua AAA 28 FO A o AA O T o A 29 SO e INCOME Se ls e a Gla e e a a a o 29 A na mierda nhc eo ac 29 O gO cae ne ne ne ee ee eee es ee ee ee eee 30 IN tes 30 3 SEU DONA cidos 31 3 110 Seip QUIEK SETUP Mode atada dadas 32 SA eo PP e 32 LIVE Search and PIGVOACK isre 33 A O roman eae aa acaoee 33 52 SeA 0018 Jem 0 2 Renan RE te ee Rr Oe ee an ne ree Se ete er eet eee eer eer ee 34 za HA AMIS LNE o Ear 0 MORE POPE POE E A 35 AN a OG y OPEREN teaetauntaaniaua teaetauntdan dave teantauntaaniauateantavetaandauateaanaearannavaiey 36 O MO ES WING o einai iments 37 52A GO TO LaSi TINE sesini T E E sates cet oeis ad arid cena dee ils d 37 022 06 GO TO SPECE TIMO aerians a iii 37 O20 ME oo el A O TATEA P ETE PIATE PIE E EN 37 TENIS CR Muda 37 5 3 Play MOUE iio 38 PTZ CONIO rnense ai 39 BACK IUD APP NL 41 7 1 Still Image Backup onto USB Flash Drive occccoccccoccnccccncconcnccnnononnnncnncnnnnnnnnnncnnnnnnnnncncnnnnnnnncnos 41 12 Video Backup onto USB Flash DIVE oa dt 41 7 3 Transferring Still Images or Video from the ARCHIVE List oocccoccccccnccccncccnccncnonanononnconcnnnanonnnnos 42 7 4 Playback Of BACKUP VIdeo isiceoiccosisnisa ias 42 Bio lo A O O PE PO hictlegad bard sen tpactiemedhansemtaace 44 Network Access Using the Single Site Network Viewer cooocccoccococncoocncoocononoconcnonanonos 45 9l POREUS MeN S orei A O 45 9 2 Installing the Network Software ooccccocccccccnccocnnooocncoo
33. _Client XXXX exe SpecoTech_HDcctv_Multi_Client_3 0 3 2_110120 exe 2 Select a destination folder and click Next Choose Destination Location Select folder where Setup will install files Setup will install SpecoTech Multi Client in the following folder To install to this folder click Next To install to a different folder click Browse and select another folder InstallShield Destination Folder CA A5peco Technologies SpecoT ech Mult Client Browse lt Back Cancel 3 Select the program folder and click Next F x Select Program Folder Pleaze select a program folder Setup will add program icons to the Program Folder listed below ou may type a new folder name or select one from the existing folders list Click Next to continue Program Folders Specol ech Multi Client Existing Folders avast Free Antivirus AwyiSynth 2 5 Canon Printer Uninstaller Catalyst Control Center CMS InstallShield 4 The setup status screen is displayed E A ry ave A S Setup Status Speco ech Multi Client Setup is performing the requested operations Installing CA ACD 14671 6530 4009 4A344 A584FC76946F WS etup ini E n oo ae InstallShield Cancel 5 After the installation is completed SpecoTech Multi Client icon displays on the desktop screen CA Aj DPECO LEC MOnrelent 10 2 Live Window When installation is completed double click the Speco
34. ation 4 Once you select the media the system will start to archive the data to the selected media 41 a 2 BACKUP Channel w All 8 CH 1 E CH2 O E CH4 smeide 1 MINUTES 2011 02 11 19 13 26 2011 02 11 19 14 26 Figure 7 2 1 Video Archiving and Backup Screen The DVR will convert the corresponding portion of the video into an AVI file 7 3 Transferring Still Images or Video from the ARCHIVE List The stored data onto hard drive will be found in the ARCHIVE list in SEARCH window User can back up still images or video into the storage device from the ARCHIVE list 1 Select the date to begin searching and navigate through the days using the control button A gt V Once you have selected the date press SEL to open the list of stored data Use the control button 4 A gt W to scroll through the on screen listings Select a list of stored events that happened previous to or after the current selection oY A PRI Once the desired event has been selected press SEL to view the still image or the first frame of the selected video en Press the BACKUP button to launch the archiving function in playback mode Press the ESC to return to the SEARCH window 7 4 Playback of Backup Video e HD PLAYER Backup video can be played back by the HD Player that the DVR copies on USB flash drive with video 42 ENS HD Player Ver 0 0 9 00 00 00 00 00 00 Us x gt ur 21 2010 08 25 15 57 41 Qa
35. chedules To setup a recording schedule select SCHEDULE in the RECORD menu Navigate through the items using the control button 4 A gt V Once the channel 1 is selected SCHEDULE CH1 screen is displayed Select ALL or each day using the control button 4 A gt V and set the recording mode using the SEL button repeatedly SCHEDULE NTINUE MOTION SENSOR r olal 14151671818 koana Figure 3 3 2 Schedule Recording Setup Screen C CONTINUOUS recording When selected the color will change to Blue M MOTION recording When selected the color will change to Yellow S SENSOR recording When selected the color will change to Red Does not record ALL Move the cursor to ALL and select a recording mode C M or S using the SEL button to set the same 19 setting for every day SUN to SAT Move the cursor to SUN to SAT and select a recording mode C M or S using the SEL button to set the same setting for the whole day Vertical Bar Move the cursor to ALL and move the cursor to the specific time using the control button 4 A gt VW And select a recording mode C M or S using the SEL button to set the same setting SEL The recording mode can be selected by pressing repeatedly the SEL button COPY FROM COPY TO Set the channel 1 schedule and select COPY TO using the control button 4 A P V select CH2 using the control button 4 A gt V and press the SEL button Then the CH1 schedule i
36. d Make sure the power cable is not damaged Make sure there is no dust accumulation on the power plug or the outlet Disassembly prohibited Do not place any foreign objects inside the unit Do note place a container holding liquids on the unit Do not allow the unit to get wet Do not use during thunder thunder storms Do not place on uneven surface Do not expose to shock or vibration Do not use this unit in areas where it is exposed to the possibility of explosion Caution Do not pull on the power cable when removing the power plug from the outlet Do not touch the power plug with wet hands Do nat sit on Make sure the cables are connected properly Do not place heavy objects on connected units Never move this unit while the power is turned on Remove the power plug from the outlet when the unit is going to remain unused for long periods of time Do not block the cooling fans or air ducts Do not expose to extreme temperatures or humidity changes The Socket Outlet shall be installed near the equipment and shall be easily accessible Warning Installation and servicing should be performed only by qualified and experienced personnel Turn off the power of the DVR when connecting cameras audio or sensor cables The manufacturer is not responsible for any damage caused by improper use of the product or failure to follow instructions for the product The manufacturer is not responsible for any problems caused by or re
37. del Type HD DVR TEST 172 16 5 141 Site Name DVR 192 168 1 10 s 7 oem Site Address iohjoij 172 16 132 210 HD DVR 1 172 16 5 33 Pod Number HD DVR 12 16 5 33 Crow Tim 203 153 236 177 ID Crow 203 153 236 177 Crow Site terraconcrete d Password Nadatel Office 211 174 110 241 Crow 3 203 82 189 137 Nada Office 172 16 20 30 Channels Crow 2 202 82 189 137 ee SITE DELETE button And then the selected site sites is are deleted HD 0410S Ch No Name 1 CH 1 CH 2 CH 3 CH 4 add Modify Delete Find IP Change 3 Click OK button And then the modified information is applied 81 10 6 2 Connect and Disconnect 10 62 1 Connect 1 Select site sites to connect from the directory window h0410e 2 F IP 192 168 1 Me Connected FT hos10e 3 IP 192 166 a h0410e 4 IP 192 168 1 Ir m Eoo o gt fees gt 16121 gees IP 192 165 aq gt he pa se PS 1612 2 HDO4105 IP 192 168 Cr a 2011 02 11 13 41 29 SPECO Multi Client Ver 3 0 3 2 82 009 8 E 2011 02 12 13 41 07 SPECO Multi Client Ver 3 0 3 2 10 6 2 2 Disconnect 1 Select site sites to disconnect from the directory window GSLiGES ETa h0410e 2 E IP 192 168 A ho410e 3 m gt IP 192 168 1 dl SR gt IP 192 168 1 NOS ps 1612 1 En oe IP 192 168 1 mt A MT DISCONNECT button and
38. e IP sharing device it will forward to the appropriate DVR Note This port number is listed next to the Port menu option in the Network Setup screen If you plan to access the DVR units only from within the same LAN the TCP port does not have to be changed Network Access beyond Router In order to access the DVR remotely beyond a router firewall the user must open TCP port for command level live channels and storage channels User need to open 2ports numbers lf the DVR port number is set to 5445 open the TCP port 5445 and 5446 on the router If this port is not opened properly user can not access DVR beyond a router If DVR supports remote setup function over the network user need to open additional port 5455 which is the 10 number from the basic port number Web Viewer Network Access Beyond Router In order to access beyond Router Firewall user must open 1 TCP port that is set on NETWORK gt WEB PORT If this port is not open properly user can not access DVR using direct Web viewer Example When NETWORK gt WEB PORT is set as 80 80 TCP port of IP address of DVR must be open 3 8 2 Network Types 3 8 2 1 STATIC 1 For the use of fixed IP See your network administrator if you do not have this information 2 When DVR is installed in IP sharer that is connected with ADSL a user can assign fixed IP to DVR from IP sharer itself using DMZ function out of such sharer Input IP set in DMZ on IP field and Gate
39. ecord Disk Info _ de Disk Total space 195 Gh OSD P About Free space 111 Gb Disk full Replace oldest files Stop recording Cs 4 Click RECORD ON button And the color of button is changed 5 Live video data is recorded as set in Record and Disk setup These video data can be searched and play backed with Local Playback File Edit View Favorites Tools Help Back gt Dd p Search Ke Folders Address C WiStorageMNCO1 Name Type Date Modified 5 20090608 File Folder 6 8 2009 4 00 PM 20090610 File Folder 6 10 2009 3 16 PM E 20090317 ndl 4 275 KB NDL File 3 17 2009 6 24 PM 20090317 _0 ndb 102 402 KB NDB File 3 17 2009 5 35 PM E 20090317_1 ndb 102 403 KB NDB File 3 17 2009 5 44 PM 3 20090317_2 ndb 102 402 KB NDB File 3 17 2009 5 52 PM 3 20090317_3 ndb 73 845 KB NDB File 3 17 2009 6 23 PM 10 6 5 Local Playback and Remote Playback 10 6 5 1 Playback of Recorded Video on Local PC 1 Click LOCAL PLAYBACK button And then Playback Window display over Live Window 2 Select site sites to connect from the directory window AE 3 Click F CONNECT button And then Green bar displays on Search calendar and slide window 4 Move scroll bar on where there is video data and Play button 16 15 5 Video data that is recorded on local PC will be play backed 86 1 Click Window SPECO Multi Client SPECO Multi Client SPECO Multi Client SPECO
40. era deleted Ch2 Camera detected Chi Disconnect Mic On Full Screen Setup Remote setup Lock Exit Image Capture of Live Screen Still image of live screen can be captured and saved as BMP or JPEG file 1 Click the channel to be captured Then the channel screen is surrounded with a red line 2 Click the CAPTURE button Then the IMAGE CAPTURE dialog is displayed Capture Save still image to file Save Path SASE nE E File Name 2010 10 12 170415 Cancel 3 Set the conditions and click OK button Then still image is saved 48 9 4 Bi Directional Audio The UMS Client allows for bi directional audio between the client and a dvr unit On the PC to use bi directional audio you will need a sound card of handling a microphone and speakers On the dvr side you will need to connect a microphone to the audio in connection and a pair of amplified speakers to the audio out connection 9 5 Remote Search Mode and Functions speco technologies 2011 02 11 13 26 57 192 168 1 22 Disconnect m Live SPECO Single Client Ver 3 0 1 0 4 Feb 2011 gt A A poe 1 2 37584 6 7 8 E LL 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 FPS 0 BitRate 0 0 Kbps 2 SB Be Capture Mark in Mark out i Backup PC DVR Button Function pescripton DATE amp TIME Displays the recording time of the data 2010 10 12 00 00 00 selected on the time bar at the bottom of the 172 16
41. ess SEL button to change the setting value of all channels at once Once you select an item then press SEL to set value for all channels Use virtual keyboard for all setting on one screen as you want as bellow picture 22 RECORD PROPERTY ALL 1 2 3 4 RESOLUTION 1280 x 720 1280x720 1280x720 1280x720 1280x720 FRAME RATE Set the frame rate for the specified channel The sum of the frame rate values from each channel cannot exceed the maximum frame rates for a specific recording resolution Typical values of the maximum frame rate for video are 120 100 fps NTSC PAL QUALITY Select the recording quality for the specified channel Options are Economy Standard High and Super 18 RECORDING Assign the recording mode for each channel Options are Continuous By Motion By Sensor By Schedule or Disable SENSOR Enable setting up to 4 sensors for the specified channel using the RECORDING control button 4 A gt V PRE RECORD Enable disable pre event recording Pre event recording time is 15 seconds to 20 minutes Selectable POST EVENT Set the post event recording time duration for the specified channel RECORD 10 30 seconds AUDIO Enable disable audio recording for the specified channel e Fixed available on only from channel 1 to channel 4 SCHEDULE Set the recording schedule Press SEL to go to schedule setup screen RESOLUTION Set the resolution to 1280X720 640X360 3 3 1 Recording S
42. eturn to setup menu screen press the ESC button SETUP DISPLAY RECORD DEVICE STORAGE SYSTEM SECURITY NETWORK CONFIG QUICK SETUP USER AUTHENTICATION USER PASSWORD Figure 3 7 1 SECURITY Setup Screen Table 3 7 1 Menu Items in SECURITY Setup Screen Item Description USER PASSWORD CHECK AUTHENTICATION Check either V or blank for the functions such as Setup Playback PB PTZ Record OFF R OFF and Network V Ask for a password when the given function is selected for all users Blank Does not ask for a password when the given function is selected for all users User Authentication USER PASSWORD ADMIN NETWORK USER1 USER2 USER3 Options are ADMIN USER1 USER2 and USERS Select USER PASSWORD using control button 4 A gt V and press SEL button Select user type using the control button 4 A P gt 217 VW and SEL button Enter the current password and select OK Enter the new password and select OK Enter the same password again to confirm and select OK Then the message PASSWORD CHANGED is displayed The factory default password is 1111 3 8 Setup Network Mode Press the SETUP button and enter the password The setup menu is displayed as picture below Select NETWORK icon and press SEL button to enter the setup menu item Navigate through the menu items using the control button 4 A gt VY and change the value of the menu item using the control button lt A gt V To return to
43. k the AVI format video 90 11 Network Access Using the 3G App Viewer 11 1 Installing the 3G App Viewer 1 Enter the Apple App Store For Apple iPhone Users or the Android Market For Android Phone users Speco Viewer will ensure the safety of your home and office at anywhere and anytime Speco Viewer DVR list DVR4HD It is very useful to following customers Anti theft monitoring for a private office located where a lot of people float around Buildings with easy access of outsiders and cashers Factory and warehouse monitoring of outsiders entrance Office and public places Couples with frequent business trip leaving old parents and children at home Homes that use personal safe Search Search 3 Install the Speco Viewer app 11 2 Live Monitoring 1 Open the installed Speco Viewer App Edit My Site List My Site speco technologies 91 2 Select the Save 3 Input the Site Information and select Save to save the Site Information Edit My Site List in the top right corner for Site Information Cancel My Site Save My Site Site Information Site My Site IP DNS hdcctv 2 Port 5445 ID admin Password 1111 gt 4 Select the saved site from My Site List 5 Select a channel to view My Site List My Site Edit Select Channel fq loall3 lla 5 fell7ls 9 10 11 12 13 14 15
44. l Secondary SNTP Server _time nist gov Security Time Zone GMT 12 00 Network 7 ON Connection Mode Time Connection Period 3 NTP Sets whether to synchronize the time using NTP server or not Primary SNTP Server Input the NTP primary server address Secondary SNTP Server Input the NTP secondary server address Time Zone Select the time zone Connection Mode Select the connection mode to NTP time server Time Synchronize the time at the time that Is set Interval Synchronize the time by hours that is set Connection Period Set the connection period 76 10 5 6 Security Select Security to set password check for user authentication for the specific functions such as SETUP PLAYBACK PTZ control RECORD OFF PLAYBACK ON OFF and NETWROK connection Remote Setup Display Record Device PTZ Control spot Password Check Storage System Description send E Mail User Authentication ADMIN 11411111 NETWORK 11111111 Network USERI 11111111 USER2 11111111 USER3 11111111 Checking the checkbox Ask for a password when the given function is selected for all users 11 10 5 7 Network Select Network to set information about the DVR network Memo If a value on this screen is changed the DVR will be restarted Hemote Setup Display Record Warning if you change this value Device DYR will be restart
45. ll Time Sets the output duration of the sensor recording video Sequence Sets whether to automatically switch or not the video output to spot terminal Sequence Dwell Time Sets the video switching interval if Sequence is set to ON Spot Channel Sets the channel that outputs video to the spot terminal 71 10 5 4 Storage Select Storage to configure continued recording settings by overwriting the hard disk and the storage period for the recording data Hemote Setup Display Record Device PTZ Control Spot Overwrite H System Security Record Limit Network HDD SET Record Limit Days HDD Info Hard Disk Size 460 GB E Remain 445 GB Hard Disk Start Time 2009 09 19 13 00 00 Hard Disk Last Time 2009 11 09 14 55 00 Overwrite To continue recording by overwriting when the hard disk becomes full check the checkbox Record Limit Sets whether to limit or not the recording data storage period Record Limit Days Sets a recording data storage period 12 10 5 5 System Select System to set system and time settings Hemote Setup Display Record c Device Client Access Band Width Saving PTZ Control o DYR ID DVR Storage 7 Date Format YY YY IMMIDD Description HA send E Mail Language ENGLISH NTP security Network Clock Set System Set Date amp Time 2009 11 09 v Af 14 55 17 DS T SUMMER TIME OFF
46. nd 2 13 UNIT ID Reserve PIN for additional feature 11 ETHERNET RJ 45 connector for network function 12 E SATA To archive still image or video into an external storage HDD Raid nits to be available in the future 13 Input Voltage Select input voltage according to local electricity standard 14 POWER SOCKET Connect for AC110V 250V 3 Setting Up the DVR The following sections detail the initial setup of a DVR 3 1 Setup Main Screen To enter the setup menu select MENU and SETUP on the screen using the mouse or press the SETUP NO VIDEO NO VIDEO NO VIDEO NO VIDEO MENU 02 13 2011 18 55 55 RICAL MD button on the front panel Then select a user type User can select one of user types ADMIN USERI USER2 USER3 using the control button 4 A gt V on the front panel and press SEL button Input the password by front key panel mouse or remote controller Virtual KeyBoard a ADMIN PASSWORD Mi 2 3 4 5 fe 7 8 o fo lalibidel ds eft tg Hacia AA Salk ls min lo do ible Bot ba tal s t fu v w x y z BACKSPACE CAPS Eee ee eee eee ALS ee b OK Cancel Use the Virtual Keyboard when you use front key and mouse The factory default password is 1111 lt is highly recommended to assign a new password to protect the system User can assign a new password in SECURITY setup menu 14 Table 3 1 1 Setup Menu Tree m DISPLAY OSD OSD CONTRAST SEQUENCE SEQ DWELL TIME
47. nd stop manual recording Press to go to the search menu SEARCH Event search Time line search Log Archive search ARCH Press to capture a still image The still image will be stored into hard drive lt can be transferred to the USB device SETUP Press to launch SETUP menu ESC Press for temporal storage of the changed value or to return to the previous menu screen 5 2 Search Screen To enter the search screen select MENU and SEARCH on the screen using the mouse or press SEARCH button on the front panel in live mode When you press the SEARCH button DVR asks for a password as in Figure 5 2 1 2 SEARCH EE TIME LINE O EVENT O GO TO FIRST TIME O GO TO LAST TIME O GO TO SPECIFIC TIME Mm EE Ee O ARCHIVE t 0 LOG p Prev Next gt Close Figure 5 2 1 Search Window Enter the password using the control button 4 A gt V There are 7 ways of search menu such as TIMELINE EVENT GO TO FIRST TIME GO TO LAST TIME GO TO SPECIFIC TIME LOG and ARCHIVE on the screen 34 How to Search Data On the Time Line Using the Mouse or Front Key Button SEARCH a Ch x 2011 02 11 19 39 00 1 1 hour moving 1 hour time bar Mouse F REW and F ADV button Front key 2 5 minute moving 12 00 00 Mouse control button lt P Front key 5 2 1 Time Line Search The TIME LINE search window is used to find the stored video by using the time line bar SEARCH s 201
48. ne installed on the site If the camera has a specific camera ID select the camera ID using the control button 4 A gt V The following options are available on the PTZ setup screen CHANNEL channel number that the PTZ is connected to NAME protocol type SPEED 19200 14400 9600 4800 2400 ID 0 63 3 4 3 Motion Zone Setup Select MOTION ZONE using the control button A gt V and select either PARTIAL ZONE or FULL ZONE using the control button lt A gt V And press the SEL button lf FULL ZONE is selected the motion setting screen is not displayed Only set the level of sensitivity for MOTION SENSITIVITY 22 FULL ZONE The motion sensor is active on the whole screen PARTIAL ZONE The motion sensor is active in the set detection frame Select the sensor detection position using the control button 4 A gt V and press the SEL button Then the color of the position which is selected will be changed Press ESC button to return to the DEVICE setup menu Figure 3 4 4 Motion Zone Selection Screen 3 5 Setup Storage Mode Press the SETUP button and enter the password The setup menu is displayed as picture below Select STORAGE icon and press SEL button to enter the setup menu item Navigate through the menu items using the control button 4 A gt VY and change the value of the menu item using the control button lt A gt V To return to setup menu screen press the ESC button SETUP l DI
49. nnnononnnonnnnnnnnnonnnnnnnnnnnnnrnnnnnnnonnrnnnnnnnnnnnnnannns 45 9 3 Live Monitoring Mode and Functions cocccocccocncccncocnconnccnnccononononnnonononnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnos 46 q BrDIrec ional o eae eee 49 9 5 Remote Search Mode and FUNCIONS sirosti T a 49 98 POOS eM GONTIUTA ON ro 52 10 Network Access Using the Multi Sites Network Viewer ooococccoccnoconoconoconoconocanocanononos 55 10 1 Installing the Network Software selis a a a 55 10 2 EVE VW IAG Wisin 56 10 2 1 Main user INter ace ocoocccoccccnconoccnconoconcononanoononanonnonanonnonanonnonanennonanenninaninns 56 TO 2 2 CONTO NULOS a a el 56 TOS S6alChi aid Playback AA 58 1031 Maim user imen AC Ci de eat 58 10 3 2 Main control panel occoocccccconoccnconoconcononanonnonanonnonanonnonannononanonnonanennenanenns 59 A E RC A A oa eeneaenten 61 A A A eee eee 62 tO A2 EVEN a a a nated 63 104 3 RECO inicia 64 O E B REPETE PESEE TEET ETET E ATE ATT E ATE A E IAEE ET E ET 65 A enn ee ee ee ere et eee ee 65 o o Co UI A 66 10 5 1 Setting TNE DIS Visions 67 WO eZ ROCO aac race teehee ts Aen thea e O PE A doa 68 A Re Rete re ere eee er eee ee eee 69 a UOC eh wear seo oe tie a sce E ee ces 72 A o o y3Q A as ees maaa eae e ne YeRs 73 WO Oe CIV CAMEO none A A 77 gO Bes Fal A e ee ee e 78 10 5 6 Network Dual STC AIO aaran aah ens vache al sha anced eee ea weet aes 79 TOD ODE all ON ren DAA AAA 80 10 6 1 Addition Delete and modify
50. nsor s is are triggered or motion is detected Table 2 1 2 Front panel buttons Name Deseription OO SEO Press to start auto sequencing of the screen in full screen mode Toggle AUDIO Press to set the audio output mode Mute 1CHt04CH SC gt SETUP Press to launch SETUP menu ALARM Press to set the alarm output mode On or Off BACKUP Press to start operations involving archiving in live or playback mode Press to go to the search menu SEARCH Event search Time line search Log Archive search Press for temporal storage of the changed value or to return to previous menu screen Press to move up the menu items in setup mode and to select camera 1 in live mode lt is also used as the number 1 when entering password 11 Press to move right in the menu or to change the values in setup mode and to select camera 2 in live mode It is also used as the number 2 when entering password Press to move down the menu items in setup mode and to select camera 3 in live mode It is also used as the number 3 when entering password Press to move left in the menu or to change the values in setup mode and to select camera 4 in live mode It is also used as the number 4 when entering Press to select full screen or quad view in live display mode It is also used to select desired menu item or to store the setup value in the menu d ENEN Jump Step backward In playback mode the playback position mo
51. o Seq Dwell Time Sets the interval for automatically switching the screens OSD Contrast Adjust the character contrast on the screen 10 5 1 2 Channel Specific Settings These settings apply to the specified channel only Channel Designation Covert Sets whether to display or not video from the channel on the monitor Video Image Adjustment 67 10 5 2 Record Select Record to set the recording conditions 10 5 2 1 Common to All Channels Resolution Sets the resolution for the recordings The set value applies to all channels Remote Setup Display Resolution Device Storage System 5 Security CH1 Network Channel Frame Rate 7 tis 3 Quality HIGH Recording BY MOTION Electronic Light Control Sensor Recording Pre Record Audio OFF Post Event Record 10 Seconds 10 5 2 2 Channel Specific Settings These settings apply to the specified channel only Channel Designation Frame Rate Sets the recording rate Quality Sets the image quality in 5 levels Recording Sets the recording mode Electronic Light control Sets whether to perform or not the electronic light control Sensor Recording Sensor recording is performed when an external sensor signal is input to the specified external sensor input terminal Pre Record Sets whether to perform or not pre recording 68 Audio Sets whether to perform or not audio recording Post Event Record Sets
52. o Bi gt 58 be NOTE HDD should be connected in the following order HDD1 ODD HDD3 HDD4 HDD5 HDD6 HDD7 HDD8 The DVR may malfunction if not connected in the following order Specification ITEM Specification Channel Input Level 4 Channel HDcctv 720p Input Video Loss Check YES Video Main Monitor Output HDMI Output Sub Monitor Output VGA Spot 1 Channel Spot Input 4 RCA Audio Output 1 RCA Audio Codec G 726 ADPCM Sensor Input 4CH NC NO Selectable Alarm Alarm Out 1CH out by Sensor Motion and Video Loss RS 485 Serial Controller RS 485 v Y N Network Ethernet 10 100 1000 Base TX Ethernet RJ45 1 EA Operation QUADPLEX Live or Playback Record Backup Network Digital Zoom Selected Area Maximize Live Channel Sequence 3 60 seconds Auto Compression H 264 Resolution 1280x720 640x360 selectable per channel Recoding Quality Grade 4 Levels Recording Recording Mode Continuous Schedule Motion Sensor Manual Motion Detection Setup by Grid Pre Recording Min 15 seconds and Max 20 minutes Post Recording 10 30 seconds Digital Zoom Zoom in of specific area x1 4 x1 2 x2 x4 x16 and x32 Playback Speed JJ m 7 7 x2 x4 x16 and x32 Search Mode Timeline Event Archive Log Specific Time File Format JPEG Proprietary Format Backup Media USB External HDD Network n Built in Viewer Dual Streaming for Live H 264 CIF 120fps Playback H 264
53. of a recorded event the mode changes from SEARCH to PLAY While in PLAY mode you may return to the SEARCH screen by pressing the ESC button CH1 Figure 5 3 1 PLAY Mode Screen Table 5 3 1 Button Functions in PLAY Mode Description Return to the previous menu screen search list or exit menu Press to rewind the footage at 1x 2x 4x 8x 16x and 32x speeds Reverse playback speed is shown as REW 1x 2x 4x 8x 16x and 32x at the bottom right of the screen Jump Step backward The playback position moves 60 seconds backward PLAY PAUSE Press to play or pause recorded video Jump Step forward Playback position moves 60 seconds forward Press to fast forward the footage at 2x 4x 8x 16x and 32x speeds Playback speed is indicated as FF 2x 4x 8x 16x and 32x at the bottom right of the screen A UP 1CH RIGHT 2CH DOWN 3CH and LEFT 4CH to be highlighted UP NO 1 RIGHT NO 2 DOWN NO 3 and LEFT NO 4CH to input password ARCH Press the ARCH button to archive the video into HDD 6 PTZ Control To control the PTZ functions of the camera select MENU and PTZ on the screen using the mouse or press the PTZ button on the front panel NO VIDEO NO VIDEO 02 13 2011 18 55 55 R C ALL O Figure 6 1 1 PTZ Control Screen Table 6 1 1 Button Functions in PTZ Control Item Description PAN TILT Select PAN TILT using the control button 4 A gt V and press SEL button Adjust the tilt UP DO
54. possible under the law 65 10 5 Remote Setup The menu settings for the DVR unit can be set from a PC via network This function will be supported to the next version Put the cursor of the mouse on the channel which is connected to the site and press the right Then the following window is displayed Select the Remote Setup Disconnect Full Screen setup Remote Setup Lock site Infomation Exit Then the setup window is displayed The specified menu screen is displayed on the upper left of the screen Record eee ON Storage lnm ON y Security H Network 2 SECONDS Hue Saturation WGA Resolution 1024 768 Memo Remote setup may not be supported depending on the DVR model or firmware version Setting is basically the same as with the DVR menu setting Refer to the corresponding pages for details on the setting items 66 10 5 1 Setting the Display Select Display to set the live video display conditions 10 5 1 1 General Settings Remote Setup Display Record Device Storage System Sequence Security Network Seq Dwell Time 2 SECONDS OSD Contrast General OSD Covert Brightness Contrast Hue Saturation WGA Resolution 1024 765 These settings apply to all channels OSD Sets whether to display or not date and time as well as channel number on the screen Sequence Setting for automatically switching the displayed vide
55. rom 1 to 4 9 16 TYPE Set the type of sensor for the specified channel Options are OFF N O normal open and N C normal closed 3 4 1 Alarm Out 2 ALARM OUT hd mm J VIDEO LOSS ON tats A s sels ALATivVi DU RATIO t ERROR ALARM Figure 3 4 2 ALARM OUT Setup Screen Table 3 4 2 Menu Item in ALARM OUT Setup Screen Item Description ALARM OUT Select an alarm out number Available NO 4CH 1 SENSOR IN Enable setting up to 4 cameras for each alarm MOTION ON Enable setting up to 4 cameras for each alarm VIDEO LOSS ON Enable setting up to 4 cameras for each alarm ALARM DURATION Set the alarm dwell time from 5 to 60 seconds ERROR ALARM Set the error type for the alarm activation The options are OFF ALL HDD ERROR and VIDEO LOSS 3 4 2 PTZ Setup To control the PTZ functions of the camera connect a controller to the RS 485 port D Connect the RS 485 cables of PTZ camera to the RS 485 port on the rear panel 21 RS485 UNIT ID s5505 e e e e e O Press SEL button or double click to enter the menu Then PTZ menu screen is displayed Figure 3 4 3 PTZ Control Setup Screen Note For speed dome cameras that support RS 485 connect them directly to the RS 485 port If the camera is controlled with RS 232C use a RS 485 to RS 232C signal converter On the PTZ control setup screen you can select or set the protocol type of the camera that is the same as the o
56. s copied to CH2 To return to setup menu screen press the ESC button 3 4 Setup Device Mode Press the SETUP button and enter the password The setup menu is displayed as picture below Select DEVICE icon and press SEL button to enter the setup menu item Navigate through the menu items using the control button 4 A gt V and change the value of the menu item using the control button 4 A gt v To return to setup menu screen press the ESC button SETUP a DISPLAY RECORD EVI STORAGE SYSTEM SECURITY NETWORK CONFIG QUICK SETUP INNEI MOTION ZONI FULL ZONE MOTION KEY TONI REMOTE CONTROLLER ID SENSOR TYPE OK cancel Figure 3 4 1 Device Mode Setup Screen Table 3 4 1 Menu Items in Device Setup Screen Item Description ALARM OUT Set the sensor motion and video loss for each alarm PTZ set the PTZ camera speed number type and ID CHANNEL Select specified channel for motion zone setup MOTION ZONE Select either Full Zone or Partial Zone for motion sensing MOTION SENSITIVITY Set the motion sensitivity for the specified channel 20 Control the motion sensitivity from 1 to 9 KEY TONE Enable disable key tone REMOTE CONTROL ID Select an ID of remote control 1 Select ID 2 Press the same number as ID set in DVR on a remote control 3 Then icon will be displayed on Live screen of DVR that respond to the remote control The options are from 00 to 99 SENSOR Select sensor NO f
57. splay of video in full screen mode SEQ DWELL TIME Set the dwell time of each single channel display in sequential display mode 8 60seconds Quad or 9 channels display in sequential display mode 1 60seconds OSD CONTRAST Set the visibility level of the On Screen Display OSD 0 100 CHANNEL Select a channel for applying the following settings using the control button 4 A gt V Press SEL button to change the channel NAME Set the channel name Press SEL button and set the channel name and select OK using the control button 4 A gt V 3 3 Setup Recording Mode Press the SETUP button and enter the password The setup menu is displayed as picture below Select RECORD icon and press SEL button to enter the setup menu item Navigate through the menu items using the control button 4 A gt V and change the value of the menu item using the control button 4 A P gt V To return to setup menu screen press the ESC button 17 2 SETUP DISPLAY RECORD DEVICE STORAGE SYSTEM SECURITY NETWORK CONFIG QUICK SETUP CHANNEL RESOLUTION FRAME RATE QUALITY RECORDING SENSOR RECORDING PRE RECORD POST EVENT RECORD AUDIO SCHEDULE 1 minutes O O TI nN ER ee AS Figure 3 3 1 Recording Mode Setup Screen Table 3 3 1 Menu Items in Recording Mode Setup Menu item CHANNEL Description Select a channel for applying the following settings using the control button 4 A gt V Pr
58. sulting from the user physically opening the DVR for examination or attempting to fix the unit The manufacturer may not be held liable for any issues with the unit if the warranty seal is removed Product Components The package contains the main unit and its components as specified below When you purchase the unit Please check to ensure the components specified below are included DVR Set Client Software CD Remote Control and Battery Option Mouse User Guide HDD Data Cable iF HDD Mounting Brackets amp Screws il Pee A t e Oo HDD Fixing Screws Thy HDD DVD RW Fixing Screw 16 EA Basic Function of the MOUSE 1 Left button SELECT function 2 Right button Go to Sub Menu 1 Double click Change Full Screen or Split Screen Mounting the Hard Disk 1 Unfasten the cover of the unit 2 Fix the supplied HDD mounting bracket to the hard disk using the supplied mounting bracket screws fi mm Seana ene E RN i ERNI 48 el gt tac 1i gs O9 ES Praia 353 X rr Z Y an oz suso n aai pappen Ll ee ee 1 1 3 Insert the HDD bracket to the hole and fix the screw 4 Connect the supplied SATA cable and power cable to the hard disk i y g y o lt 5 371 a 3 f aH sE eel i o E Er D a ca qe R 335 z Se Fd
59. t Event search Startup Shutdown _ Setup S Record Local Playback Remote Playback Ey Disk OSD Save Path P About Capture C Storage Wapture Backup C Storage Backup Miscellaneous Automatic reconnection Always On Top Time Format YY Y MM DD 62 10 4 2 Event Event log can be archived and searched 10 4 2 1 Archiving Event Log Specify the location to save event logs and select event to archive E General Log Event search ci ti Lanta F Record size 40 MAX 100Mb E Disk OSD P About Event Startup ES Shutdown 2 Setup Change ES Sensor in PE Alarm out motion SH Camera loss af Network loss a Record Event list AIEEE E E EEE dat AAI E General a B gt Event First 06 04 2009 12 00 00 AM ey vent searcr y E dl a n E search C Last 06 04 2009 w 4 37 29PM 2 S Record a E Disk CiStoragelLog osp About Site Address Event Date Time 63 10 4 3 Record 10 4 3 1 Record Setup You can set the recording conditions for Always Event or Auto record And you can also select target DVR DVRs and channel channels When you set the recording condition to event you can set event for motion or alarm with duration General Record Condition Event an Always O Event Auto record Event search iia O A Record Event 7 m
60. tallation is completed SpecoTech Client icon is displayed on the desktop 9 3 Live Monitoring Mode and Functions speco technologies 2011 02 11 09 49 51 4 Connect EQ Search SPECO Single Client Ver 3 0 1 0 BitRate 0 0 Kbps i iif O0 Pause Backup Event Date Time Startup 2011 02 11 09 48 26 P fi Setup Alarm 46 Description 201 0 02 03 11 39 40 At Connect DATE amp TIME Displays the current date and time CONNECT DISCONNECT Connect disconnect network connection SEARCH Switches the live mode to search mode EQ Search DISPLAY MODE Select a channel and screen display w ae mode PAN TILT ZOOM FOCUS Control the PAN TILT ZOOM FOCUS features on the remote camera CAPTURE Capture a still image from live screen PLAY PAUSE Play pause live video The ON OFF button of the alarm output TT ALARM of the DVR When an alarm of the DVR is output this button becomes Red SETUP Display the setup screen of the network viewer DVR HDD storage Indicator NETWORK BANDWIDTH Shows the transferred frames and network bandwidth Adjust the volume The audio can be turned on or off by clicking the audio Icon LOG WINDOW Operations of the display mode of the main screen E Single channel display Click the one of channel button or double click the channel screen QUAD screen display Click the QUAD button to switch to quad screen display Cam
61. the time scale and drop it between 0 to 24 Press the PLAY button Then the video recorded in the remote DVR is played back per each channel that you choose by HD image speco technologies Backup of Video in the Remote DVR Video recorded in the remote DVR cab be backed up on the PC HDD as AVI format 1 2 Connect the network to the remote DVR and play the video recorded in the remote DVR Drag the slid on the time scale and drop to the start time for video backup and press the MARK IN button gt E 0 2 4 Mark in Drag the slid on the time scale and drop to the end time for video backup and press the MARK OUT button Then the marked time is displayed in dark green Es 0 2 4 Mark out 0 2 4 AVI Backup dialog is displayed Click the OK button Then the marked video is backed up 51 Select Channels Y Ch 1 Y Ch 3 Y Ch 4 Y All Setting Start Time 17 04 35 End Time 17 09 55 File Path C Storage Backup File format AVI Cancel e Start time Stop time Backup time can be changed e File path Shows the folder that the backup file is recorded e Channel Shows backup channel 9 6 PC System Configuration Click the SETUP button Then the Setup dialog is displayed General Site Event F Startup F Shutdown F Search Event search Password Record Live Monitoring Setup E Disk About Save Path Capture C Storage Capture lem Backup
62. then selected site sites disconnected o En Y SEE HD0O4105 IF 192 168 1 demo IP 192 168 SPECO Multi Client SPECO Multi Client Ver 3 0 3 2 Ver 3 0 3 2 SPECO Multi Client SPECO Multi Client Ver 3 0 3 2 Ver 3 0 3 2 A A 83 10 6 3 Still image capture during Live 1 Double click a channel to capture from the display screen Otherwise all channels will be captured al gt Y 2 Click CAPTURE button And then a Capture window displays Capture save Path C Storage Capture1n0410e 2 File mame 06 10 2009 151655 File Format BITMAP BMP Y 3 Set Save path File Name and File Format And then click OK button 4 Still image is saved as set in Capture window fm 1104108 2 Sel ae File Edit View Favorites Tools Help Back 77 L search Folders p gt Q o BS y Xx Address C storage Capture th0410e 2 v Go 01 12 2004 213058 84 10 6 4 Recording video on local PC during Live 1 Click SETUP button And then a setup window display 2 Select Record and set the values General Record Condition E Evert MER Always O Event Auto record F Record Event ey Disk tas OSD P About Duration Channel Site All site All NO CH 1 Channel 1 2 Channel 2 3 Channel 3 4 Channel 4 5 Channel 5 6 Channel 6 3 Select Disk and set the values E General Event Disk Space NETA v 4 Event search nn a R
63. time line scale To change a time line scale from 24 hours to 60 minutes or vise versa The timeline shows recorded data in color on the bar You can adjust the time line scale and move it to the time you wish to playback Then click the play icon to display the recorded video OOO O0O Playback buttons 10 4 Setup Click the setup icon Bs to setup the configuration of UMS Multi Client software The Setup window displays panama security Option Event Event search startup Shutdown _ Setup ig Record Local Playback Remote Playback Ey Disk OSD Save Path About Capture C Storage Capture 7 Backup C Storage Backup Miscellaneous Automatic reconnection Always On Top Time Format YY YY MM DD 61 10 4 1 General 10 4 1 1 Security Option Set a password for security options Select security options and set a password Then when you access any of selected functions you need to enter the password You can also set the save path for capturing and backup 10 4 1 2 Save Path Specify the location to save captured still image for Capture and Backup data 10 4 1 3 Miscellaneous Automatic reconnection If a user selects this function client S W will automatically try to connect the finally connected IP address after the network is disconnected Always On Top Time Format Change the way the Client software displays the time i Security Option re Even
64. to backup 2 Select the beginning time by using the search calendar and slide bar A o SA OS SS T SO O 14 42 13 14 16 16 17 18 19 20 eS A o 21 22 23 24 26 26 27 20 22 24 23 28180 3 Click MARK IN button when the scale of the timeline is located on the target time as the beginning time of backup 4 Set the ending time on the blue timeline by dragging the scale on the target time as the ending time of backup and clicking a MARK OUT button Then color of the timeline between the beginning time and ending time will be changed into dark Green 5 Click BACKUP And then the window appears as below AVI Backup Select Channels CH 1 cH 2 cH 3 CH 4 Setting Start Time 113 22 33 End Time 13 25 40 File Path C1StoragelBackupi 89 6 You can also set the beginning time and ending time on this window After selecting a channel for backup click the OK button The backup will begin AVI Backup Select Channels setting Start Time End Time File Path CAStorage Backup 7 AVI video data is recorded as set in AVI Backup window AVI format video can be played back by Window Media Player or other media player that is compatible with AVI format video Windows Media Player ar AT 3 Now Playing Library j 2 Media Guide CHO1 13 22 33 Now Playing CH01 13_22_33 Notice When PC doesnt have proper H 264 CODEC the media players cannot playbac
65. tton to return to the main menu NUMBER Available only on the TOUR and PRESET menu eo Preset Tour OSD Autoscan function are available on the specific model AP8777 and PMA 200 Select it in the NAME of PTZ setup menu Table 6 1 2 Description of RS 485 Port RS485 Data CAMERA CONTROLLER a ad ds he O E 0101 0 38335 Data 40 7 Back Up 7 1 Still Image Backup onto USB Flash Drive Still images can be captured and archived onto the USB flash drive in live mode or while playing back recorded video In live mode press the BACKUP button to launch the archive function or select MENU and BACK UP on the screen using the mouse Figure 7 1 1 Still Image Archiving and Backup Screen 1 When you press BACKUP button the archiving screen will display as Figure 7 1 1 2 And the DVR will ask which media you will take for archiving 3 Once you select the media the system will start to archive the data to the selected media 7 2 Video Backup onto USB Flash Drive Video can be captured and archived onto the USB flash drive while playing back recorded video In playback mode press the BACKUP button to launch the archiving function 1 When you press BACKUP button the DVR will ask whether to archive a Still Image or Video clip 2 Ifthe user selects VIDEO the DVR will ask which media you will take for archiving 3 If the user selects VIDEO the DVR will ask for the setting of the archiving dur
66. ves 60 seconds backward i password PLAY PAUSE Press to play or to pause the footage in playback mode dd BEN Press to rewind the footage at 1x 2x 4x 8x 16x and 32x speed in playback mode ER Jump Step forward In playback mode the playback position moves 60 seconds forward om py Press to fast forward the footage at 1x 2x 4x 8x 16x and 32x speeds in playback mode REC Press to start MANUAL RECORDING There is a USB port located on the left side of the front panel This USB port is USB port used to archive footage into a USB storage device or mouse control USB 2 0 connector NUM KEY CH1 2 3 4 Channel selection button 2 Connection O OC EO O eje e R G HEEHEHES Eiri Vv D Figure 2 1 1 Rear Panel RS485 ojojojojo e e e e Table 2 1 1 Rear Panel Connections NO Connection Purpose 1 VIDEO IN 4 BNC connectors for video input HDcctv HD SDI 2 AUDIO IN 4 connectors for audio input 3 AUDIO OUT 1 connector for audio output 4 VIDEO OUT Spot output 5 VGA Connector for VGA monitor 6 RS 232 POS Interface 7 HDMI OUT Main video output 8 USB Port Connector for mouse or backup 9 RSV Reserved PIN for additional feature D1 1 RS 485 port D2 2nd RS 485 port A1 B1 Alarm output connector for alarm device SENSOR IN 4 connectors for sensor device connection S1 54 10 TERMINATE RS 485 termination switch for 1 a
67. way of ADSL modem on Gateway field Similarly for Subnet Mask DNS address input relevant values in IP sharer 29 Table 3 8 2 LAN Item Description IP The fixed IP address of the DVR unit SUBNET MASK The subnet mask for the LAN GATEWAY The IP address of the Gateway 1 DNS The address for the DNS server 2 DNS The address for the DNS server 3 8 2 2 DHCP An IP address is automatically assigned by the DHCP server which automatically assigns IP address and other parameters to new devices When ADSL or other network being used adopts variable IP method not fixed IP This option is used as a way to automatically get IP address 3 8 2 3 DDNS User can use the function to connect to a network with a domain name When it selects a Sever 1 user can select one type among three DDNS Servers which be supporting for free The DDNS interval can be set from 5 to 60 minutes To connect to a network with a domain name user also has to register a MAC address and create a unique domain name to ddnscenter com S DDNS SERVER1 DDNS SERVER NAME Y OK cancel Figure 3 8 2 Network Setup Screen DDNS Server 1 DDNS SERVER2 DDNS SERVER NAME DDNS ID Unspecified DDNS PASSWORD kok kK KK Kk kkk DDNS INTERVAL 60 MINUTES OK Cancel Figure 3 8 3 Network Setup Screen DDNS Server 2 If user wants to use other general purpose DDNS Server select a Sever 2 Then user has to input the

Speco Technologies 4HD DVR User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents