Home

Sony headphone Headphones User Manual

Contents

1. 1 Press Menu key featured as Y or press on the center button of the 5 Way Navigation Key featured as 4 to access Menu Scroll to Settings SELECT Choose Connection SELECT Bluetooth Link SELECT 2 Continue pressing Back to exit PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press Menu key or press on the center button of the 5 Way Navigation key O to access Menu Scroll to Settings SELECT Choose Connection SELECT Bluetooth Link SELECT 22 4 Choose Handsfree SELECT Look for devices SELECT The phone will then scan the device to be added 5 On the scan results choose the device you want to pair with your cell phone SELECT A question Bond with device name appears Press YES 6 Enter Bluetooth passkey 0000 then press ok f pairing is successful a remark Connected to device name appears The phone exits automatically The unit is now ready to link calls from the phone directly to the Car Kit If pairing is unsuccessful the steps above may be repeated ANSWERING RECEIVING A CALL When the phone is receiving a call ring tone will be heard on the Car Kit 1
2. Scroll to Settings SELECT Scroll to Headset SELECT 2 Choose Voice Dial CHANGE Choose ON SELECT 3 Continue pressing Back then finally Exit RECORDING FOR VOICE DIALING Note Make sure the number is stored in Phone memory 1 Press Menu key featured as or press on the center button of the 5 Way Navigation Key featured as Q to access Menu Scroll to Phonebook SELECT 2 Choose a contact which you want to make a voice dial then press W Choose Edit then press SELECT 23 3 Onthe Entry Details choose MORE and press SELECT 4 Onthe Add New choose Phone Number SELECT No is highlighted Press CHANGE Enter the corresponding contact number and then press Ok Do not press DONE yet 5 Using the 5 way Navigation key scroll down to Voice Name then press RECORD Follow instructions on the screen Note If recording is successful an icon will appear next to Voice Name 6 Press DONE Notes 1 The recorded voice will be played back to you 2 On the listed names in your Phonebook an icon appears next to aname which has a Voice Name This indicates that you can contact this person via voice dial 3 Noisy environment may affect voice recognition Record your voice in a quiet environment USING WITH NOKIA 6310 6310i ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Pres
3. E 23 Nokia 6310 6310 25 Nokiag0lU O OZ O O 27 Noki BO lUL 3133 3 wen 29 Nokid36580 a 31 gt 0 lt _ _ 33 Nokid 6bBU _ 7 34 Nokia D60l aeaea 36 031083501162070 enii debanon 38 QIek 2020 0 0 RARE TANASE 40 510310 032 jg DUX GE EROR AC Doc CR 41 Siemens ODD J J3 QA d aV kac dL PERPE RE EREEIS 42 Suggested Pairing Modes Pairing Mode Call enone Models Handsfree Headset Ericsson T39m Sony Ericsson 8 v4 Sony Ericsson T68i R6 and below S Sony Ericsson T68i R7 Sony Ericsson P800 P900 Sony Ericsson T610 Sony Ericsson T628 Sony Ericsson Z600 Nokia 8910 Nokia 891 0i Nokia 3650 Nokia 6230 Nokia 6650 Nokia 6600 Panasonic X70 Qtek2020 Sharp GX32 Siemens S55 SI SIS 5 SNL 6 6 The Car Kit turns on automatically when the engine is turned on The ON state is
4. To terminate the call press the multi function button again MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press OK Sound is automatically transferred to the Car Kit 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step f and g for the procedure when activating and recording for voice dialing 1 Press the multi function button once to activate the voice dialing Sound is automatically transferred to the Car Kit 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing Before voice dialing you must first turn on the name dialing function and record your voice To turn voice dialing on 1 2 3 4 5 6 On the Applications window flip open mode tap Phone Tap Edit then tap Preferences A list of features will appear Tap Voice Control then tap the box aligned to Voice dialing to check and activate the voice dialing feature Tap the
5. 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press to access Main Menu Scroll to Connectivity Select Choose Bluetooth Select 4 Scroll to My devices Se ect New device Add The phone will then search for pairable devices to be added 5 The searched devices will then be displayed Choose the device name you want to pair with this phone then press Select 17 6 Enter 0000 as the passcode then press Ok If pairing is successful the alternating red blue lights Bluetooth Indicator will stop and will change to plain blinking blue 7 Your device name is now added under My devices tab Highlight the newly paired device and then press Connect to completely establish connection between your mobile phone and your Car Kit 8 When a statement appeared indicating that your device is connected continue pressing 129 5 to exit The Car kit is now linked or paired with the phone If pairing is unsuccessful the steps above may be repeated ANSWERING RECEIVING A CALL When the phone is receiving a call ring tone will be heard on the phone and on the Car Kit 1 Shortly press the multi function button once to answer the call 2 Shortly press the multi function button once to
6. Press Menu and select Settings Connectivity and Bluetooth 4 Select Search for audio enhancements The phone now searches for Bluetooth devices to be paired When the search is complete it displays the names of the devices found 5 Choose the device you want to pair with your phone Select 6 Enter 0000 as the passcode then press ok 7 Continue pressing Back then finally Exit The Car Kit is paired and ready to use An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone Notes 1 Once paired keypad tones will be heard on the Car Kit 2 Pairing is done only once When the Car Kit is turned off then turned back on it is automatically connected to the cellphone That is when you already activate the phone s Auto Accept Mode Kindly refer to section c AUTO ACCEPT MODE 3 When the paired device is deleted it can still be viewed as an active device and not yet completely disconnected Thus there will still be simultaneous connection between your Car Kit and cell phone even after deleting was done But when you delete the pairing and at the same time you disconnect it as an active device That is pressing Disconn you totally disconnect the bond 4 If ever the paired device was deleted and bond totally disconnected but you wish to pair it again you need to undergo the same pairing procedure AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to b
7. 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 For T68 and T68i older versions R6 and below press the multi function button once again for a short time to access headset pairing mode 4 Go to Menu by pressing the joystick Scroll to Connect YES Select Bluetooth YES 5 Select Paired devices YES Add device YES Choose Phone initiates YES Choose Headset Handsfree YES The phone will then search the device to be added After the device is found press YES QUICK ACCESS for steps 4 and 5 Press Menu then follow the sequence of numbers below Pai red Phone Headset ai a RE dm 2 08 xo cp 1 Eme s aerator 88 2 e 6 Enter 0000 as the passkey If pairing is successful the alternating red blue lights will stop Press YES to confirm the name of the device If pairing is unsuccessful the steps above may be repeated 7 Continue pressing NO to exit from menu The unit is now ready to link calls from the phone directly to the Car Kit An icon will appear during the standby mode indicating that the Car Kit is linked with the phone c ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit 1 Just press the multi function button once to answer the ca
8. ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press Menu Key Scroll to Connectivity SELECT Bluetooth SELECT Choose Turn ON SELECT 2 Continue pressing lt to exit QUICK ACCESS a Press More key b Scrollto Turn On Blue tooth SELECT c Continue pressing to exit SETTING TO LOW POWER MODE 1 Press Menu Key Scroll to Connectivity SELECT Bluetooth SELECT 2 Scroll to Handsfree SELECT Choose Car handsfree SELECT 3 Choose Power Save SELECT 4 Continue pressing to exit PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press Menu Key Scroll to Connectivity SELECT Bluetooth SELECT 4 Scroll to My Devices SELECT New Device ADD The phone will then search the device to be added After the device is found press SELECT 5 Enter 0000 as the passkey and press OK If the pairing is successful the alternating red blue lights will stop If pairing is unsuccessful the steps above may be repeated 6 Continue pressing to exit The unit is
9. Choose Voice control SELECT then go to Voice dialing SELECT Edit names SELECT New voice ADD 2 Find a contact then press SELECT 3 Follow the instructions that are displayed Voice is automatically saved on the phone An icon will appear next to a contact name which has a voice command 4 Continue pressing to exit Note Noisy environment may affect voice recognition Record your voice in a quiet environment USING WITH SONY ERICSSON T628 ACTIVATING THE BLUE TOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Goto Menu by pressing the joystick Scroll to Connectivity SELECT Select Bluetooth SELECT Turn On SELECT 2 Continue pressing to exit SETTING TO LOW POWER MODE 1 Press Menu Key Scroll to Connectivity SELECT Bluetooth SELECT 2 Scroll to Handsfree SELECT Choose Car handsfree SELECT 3 Choose Power Save SELECT 4 Continue pressing to exit PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Go to Menu by pressing the joystick Scroll to Connectivity SELECT Select Blueto
10. Just press down the multi function button once to answer the call 2 Press down the multi function button once to terminate the call MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press SEND ANS key Audio will be heard on the Car Kit 2 Toterminate or hang up the call press down the multi function button once Voice dialing Refer to step h and i for the procedure when activating and recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the hang up button to terminate the call Redialing Press the multi function button twice quickly to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button once or accessing the cell phone s menu during ongoing calls REJECTING A CALL Press the multi function button twice quickly to reject an incoming call ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing Before voice dialing you must first turn on the Voice Dial function of your phone and record your voice To turn voice dialing on 1 Goto Menu by pressing the feature
11. Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing Press quickly the multi function button twice to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls REJECTING A CALL Press the multi function button twice to reject the incoming call RECORDING FOR VOICE DIALING Use your phone when recording for voice dialing 1 From standby mode press arrow up or down 27 2 Find a contact name to which you want to add a voice tag Press Details button The phone number will be displayed 3 Press Options button Add voice tag SELECT Press Start and say the name clearly Voice tag saved is displayed indicating that the voice tag has been saved 4 n case you wish to change your recorded voice press Names Voice tags SELECT Scroll to the name that you want to change the voice tag then press Options Change SELECT Follow the instructions 5 Continue pressing Back button to exit Note Noisy environment could affect voice recognition Record voice
12. Scroll to Bluetooth SELECT Press SELECT again 2 Choose On SELECT An icon will appear on the upper left corner 3 Press Back then finally Exit QUICK ACCESS Press Menu followed by the sequence of numbers below Bluetooth Select 8910 10 1 On Select 1 1 PAIRING TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press Menu Scroll to Bluetooth SELECT and Search for audio accessories SELECT The phone is now scanning for Bluetooth devices SELECT the Car Kit The phone will initiate connection with the Car Kit QUICK ACCESS for step 3 Press Menu followed by the sequence of numbers below Bluetooth Search for audio accessories 8910 10 2 4 Enter 0000 as the passcode then press OK The volume level will be displayed The phone is now connected with the Car Kit 5 Press Back then Exit to exit the Menu The Car Kit is paired and ready to use An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone Note Once paired the Car Kit and the phone have simultaneous connection with each other Keypad tones will be heard o
13. box aligned to Play caller name so that the name will be played back to you Tap Done on the on screen button when finished On the Preferences mode tap Done again Tap 33 to exit and return to the Applications mode RECORDING FOR VOICE DIALING The voice dialing feature is only applicable to contacts saved to phone memory 1 2 3 4 5 On the Applications window flip open mode tap Contacts Tap the contact where you want to add a voice dialing feature Tap Edit Scroll to Edit Contact Tap on the on screen buttons Tap Record Speak after tone will be displayed on the screen Record your voice To check if your recording is of good quality tap Play If not tap Record again Press Done when finished Tap to make another record and repeat the steps above To return to the Applications window tap 8 button Note Noisy environment may affect voice recognition Record your voice in a quiet environment 12 USING WITH SONY ERICSSON T610 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Goto Menu by pressing the joystick Scroll to Connectivity SELECT Select Bluetooth SELECT Turn On SELECT 2 Continue pressing to exit PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a
14. distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Goto Menu by pressing the joystick Scroll to Connectivity SELECT Select Bluetooth SELECT 4 Scroll to My devices SELECT New device ADD The phone is now searching for pairable devices to be added Select the device you want to pair with your cell phone Press SELECT 5 Enter 0000 as the passkey then press OK If the pairing is successful the alternating red blue lights will stop 6 Continue pressing lt to exit The unit is now ready to link calls from the phone directly to the Car Kit An icon will appear during the standby mode indicating that the Car Kit is linked with the phone ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit 1 Just press the multi function button down once to answer the call Pressing the button again will hang up and terminate the call 2 f you wish to answer a call on the cellular phone just press YES and the call is automatically transferred to the phone Pressing the multi function button transfers the call on the Car Kit 3 To terminate the call press the multi function button again MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press CALL button Audio is automatically transferred
15. g for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the multi function button again to terminate the call Redialing Pressing quickly the multi function button twice triggers the cell phone to redial the last number Call is automatically transferred to the Car Kit AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls REJECTING THE CALL Press twice quickly multi function button to reject the incoming call RECORDING FOR VOICE DIALING Use your phone when recording for voice dialing Record your contact names and numbers in the Address book phone memory 1 From standby mode open the Adaress book by pressing the arrow down key gt I If Phone book is the one displayed press E Sf5 key to switch to Address book 2 Select a contact name OPTIONS 3 Scroll to Voice dialing SELECT New SELECT Recording for contact name YES Follow the instructions Your voice is automatically saved on the phone after being played back to you 4 n case you wish to change yo
16. mobile phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 2 3 Press Ne to access Main Menu Scroll to Settings SELECT Scroll to Connection SELECT Bluetooth Link SELECT Set up SELECT Scroll to Power Off Press CHANGE Choose On SELECT Continue pressing BACK to exit PAIRING TO THE CELLULAR PHONE 1 2 Bring the cellular phone at about 20 cm from the Car Kit From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing Press Qor p to access Menu Scroll to Settings SELECT Choose Connection SELECT Bluetooth Link SELECT Choose Handsfree SELECT Look for devices SELECT The phone will then scan devices until it displays them in the list Under scan results choose the device you want to pair with your mobile phone and press SELECT A question Bond With device name appears Press YES Enter Bluetooth Passkey 0000 then press ok If pairing is successful a remark Connected appears The phone exits automatically The Car kit is now linked or paired with the phone If pairing is unsuccessful the steps above may be repeated ANSWERING RECEIVING A CALL When the phone is receiving a call ring tone will be heard on the phone
17. terminate the call MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press Call key Audio is possible on the phone or on the kit At times when the audio is not on the kit apply audio transfer see section e 2 Toterminate or hang up the call shortly press the multi function button Voice dialing Refer to step h and i for the procedure when activating and recording for voice dialing 1 Shortly press the multi function button once to activate voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the voice name of the person to call 3 Say the name The voice name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Shortly press the hang up button to terminate the call Redialing Press the multi function button twice quickly to redial the last number AUDIO TRANSFER Audio transfer can be done during an ongoing call Car kit initiates transfer from kit to phone Press twice quickly the multi function button Car kit initiates transfer from phone to kit Shortly press the multi function button once Note Using your phone access Menu button during an ongoing call to transfer sound to the Car Kit or to your phone REJECTING A CALL Press the multi function button twice quickly to reject an incoming call ACTIVATING THE VOICE
18. the call AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing Before voice dialing you must first turn on the voice dialing function and record your voice To turn voice dialing on 1 Press Menu Key Scroll to Settings SELECT Scroll to Voice control SELECT Voice dialing SELECT 2 Choose On SELECT 3 Continue pressing lt to exit RECORDING FOR VOICE DIALING 1 Press Menu Key Scroll to Settings and press SELECT Choose Voice controls SELECT then go to Voice dialing SELECT Scroll to Edit name SELECT New voice ADD 2 Select a contact and press SELECT 3 Follow the instructions in the display An icon will appear opposite a contacts name which has a voice command 4 Continue pressing to exit Note Record your voice command in a quiet place so that only your voice will be recorded on the phone USING WITH SONY ERICSSON K700i ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press to access Main Menu 2 Scroll to Connectivity Select Bluetooth Select Turn On Select 3 Continue pressing L5 to exit PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the Car Kit
19. to the Car Kit 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step g and h for the procedure when activating and recording for voice dialing 1 Pressthe multi function button once to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the multi function button again to terminate the call Redialing Press quickly the multi function button twice to redial the last number 13 C AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls REJECTING A CALL Press the multi function button twice to reject the incoming call ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing Before voice dialing you must first turn on the name dialing function and record your voice To turn voice dialing on and record number types 1 Goto Menu by pressing the joystick Scroll to Settings SELECT Voice control SELECT Voice dialing SELECT 2 Choose On SELECT 3 Continue pressing lt to exit RECORDING FOR VOICE DIALING 1 Go to Menu by pressing the joystick Scroll to Settings and press SELECT
20. your voice command in a quiet place so that only your voice will be recorded on the phone USING WITH PANASONIC X70 a ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Go to Menu by pressing the center button of the 5 way navigation key featured as O 2 Scroll to Organizer Select Scroll to Connect Select Bluetooth Select 3 On Off Select Choose On Select QUICK ACCESS Press Menu followed by the sequence of numbers below Organizer Connect Bluetooth On xo 9 t a S 4 Continue pressing to exit b PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Goto Menu by pressing center button of 6 key Scroll to Organizer Select Scroll to Connect Select Bluetooth Select 4 Choose Discover amp Pair Select QUICK ACCESS for steps 3 and 4 Press Menu followed by the sequence of numbers below Organzer X Connect X Bluetooth x70 8 9 1 23 The phone is now searching for pairable devices to be added 5 Select the de
21. Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press the Menu button Using the joystick scroll to Connect press to select A list of options will be displayed Choose Bluetooth press to select Bluetooth press Paired devices will be displayed as title Press OPTIONS New paired device SELECT Searching for devices will be displayed Select the Car Kit and press SELECT Waiting for and Passcode for will be displayed simultaneously 35 4 Enter 0000 as the passcode then press OK Waiting for with complete will be displayed simultaneously 5 Continue pressing Exit key to exit the Menu and Pairing The Car Kit is paired and ready to use An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone Note Once paired press the multi function button once to establish simultaneous connection between the Car Kit and the phone keypad tones can be heard on the Car Kit every time the keypad is pressed If ever the paired device was deleted and turned off once it is turned on there is no need to undergo the same pairing procedure Press the multi funct
22. CTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press the joystick to access Menu Scroll to Settings SELECT Choose Connection SELECT Bluetooth Link SELECT 2 Scroll to Setup SELECT Scroll to Power CHANGE Choose ON SELECT 3 Continue pressing Back to exit PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for_pairing 3 Press the joystick to access Menu Scroll to Settings SELECT Choose Connection SELECT Bluetooth Link SELECT 4 Choose Hands free SELECT Look for devices SELECT The phone will then scan the device to be added 5 On the Scan results choose the name of this car kit SELECT A question Bond with device name appears Press YES 6 Enter Bluetooth passkey 0000 then press ok If pairing is successful a remark Connected device name appears The phone exits automatically The Car kit is now linked or paired with the phone If pairing is unsuccessful the steps above may be repeated ANSWERING RECEIVING A CALL When the phone is receiv
23. DIALING Before voice dialing you must first activate the voice dialing function of your cell phone and record a voice command for a particular contact 1 Press to access Main Menu Scroll to Settings Select Voice control Select Voice dialing Select Activate Select 2 Continue pressing L S to exit 18 h RECORDING FOR VOICE DIALING Note Voice dialing entries must be stored in the phone s memory not on the SIM card 1 6 Press access Main Menu Scroll to Settings and press Select Choose Voice control Select Voice dialing Select Edit names Select New voice Add Contacts list will appear Choose among the contacts whichever you want to have a voice name voice tag When it s highlighted press Select Follow the instructions that will be displayed on screen Note You may use any word s or just say the person s name for a voice tag When your spoken word s is caught up by the phone it will ask you to listen to your recording and will ask the question Is it ok As soon as you press Yes as reply your voice command will be saved Under Voice Commands tab a callout icon will appear next to a contact name which has a voice command Continue pressing 5 to exit Note Noisy environment may affect voice recognition Record a voice and make a voice dial in a quiet environment USING WITH MOTOROLA E398 ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your
24. ING A CALL Press the multi function button twice to reject the incoming call RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 Press Menu 5 button Select Contacts OPTIONS Open SELECT 2 Find a contact name Press button The contact number is the one being displayed 3 Press Options button Scroll to Add Voice tag SELECT Instructions appear Your voice is automatically saved on the phone after being played back to you 4 n case you wish to change your recorded voice press Options button Voice tag SELECT Change SELECT Instructions appear 5 Continue pressing Exit key to get out of Menu Note Record your voice command in a quiet place so that only your voice will be recorded on the phone 31 USING WITH NOKIA 6230 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press Menu and select Settings Connectivity and Bluetooth 2 Select Blue tooth on and On 3 Continue pressing Back then finally Exit PAIRING TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3
25. Kit indicating that the call has been terminated Voice dialing Refer to step h for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing Press quickly the multi function button twice to redial the last number a6 f AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls g REJECTING A CALL Press the multi function button twice to reject the incoming call h RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 Pressthe Menu button Scroll to Contacts and press Q 2 Find a contact name Press Obutton The contact number is the one being displayed 3 Press Options button Scroll to Add Voice tag SELECT Instructions appear Your voice is automatically saved on the phone after being played back to you 4 n case you wish to change your recorded voice press Options button Voice tag SELECT Change SELECT Instructions appear 5 Continue pressing Exit key to get out of Menu Note Record
26. OPERATI NG MANUAL Bluetooth Enabled Car Kit Ceo FCC QVN HFK2M4 9 10R 02 1699 Version 3 5 OVERVIEW This unit uses Bluetooth technology that allows wireless communication among devices such as cellular phones This is designed to be a totally wireless hands free Car Kit This will enable the user to communicate freely while driving without holding the phone This unit will work on all Bluetooth cellular phones provided that they respect the Bluetooth protocol Figure 1 1 Multi function Button Answer Hang up Pairing Voice Recognition Indicator lights Timer See page 3 2 Cigarette Lighter Plug Specially designed to fit into the cigarette lighter jack with a swivel mount up to 120 3 Speaker Allows the user to hear the voice of the other party 4 Volume Control This rotary control will adjust the audio volume of the speaker A OPERATIONS Before use the Car Kit must be paired with the phone This car kit requires either of two pairing modes Handsfree or Headset mode which you will select depending on your cellular phone Pairing is done only once After being paired the phone and the Car Kit becomes connected You can answer or make a call using the car kit instead of your phone For the instructions please refer to Car Kit Operations for Popular Cell Phones on page 6 B INSTALLING THE MICROPHONE 1 Put two 2 AAA Alkaline batteries in the wireless microphone The negative polarit
27. TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press Menu Scroll to Connectivity SELECT Bluetooth SELECT and scroll to Search for audio enhancements SELECT The phone is now searching for Bluetooth devices SELECT the Car Kit The phone will initiate connection with the Car Kit QUICK ACCESS for step 3 Press Menu followed by the sequence of numbers below Connectivity Blue tooth Search for audio accessories 6650 11 1 2 4 Enter 0000 as the passcode then press OK The phone is now connected with the Car Kit 5 Continue pressing the Back button to exit from Menu The Car Kit is paired and ready to use An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone Note Once paired the Car Kit and the phone have simultaneous connection with each other keypad tones can be heard on the Car Kit every time the keypad is pressed AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit 1 Press Men
28. Use handset or Use Bluetooth to transfer audio to phone or to the kit REJECTING A CALL Press the multi function button twice quickly to reject an incoming call ACTIVATING THE VOICE DIALING Use your phone when recording for voice dialing Before voice dialing you must first turn on the Voice Dial function LO uae your voice To turn voice dialing on 1 Press the joystick to access Menu Scroll to Settings SELECT Scroll to Headset SELECT 2 Choose Voice Dial CHANGE Choose ON SELECT 3 Continue pressing Back to exit RECORDING FOR VOICE DIALING Note Voice dialing entries must be stored in the phone s memory not on the SIM card 1 Pressthe joystick to access Menu Scroll to Phonebook SELECT 2 Choose a contact which you want to make a voice dial press VIEW then EDIT 3 On the Entry Details window scroll to Store To press CHANGE Choose Phone SELECT This is storing the number to phone memory 4 Scroll to Voice Name then press RECORD Follow instructions on the screen Note If recording is successful an icon will appear next to Voice Name 5 Press DONE Notes In the listed names of your Phonebook an icon appears next to a name which has a Voice Name This indicates that you can contact this person via voice dial USING WITH MOTOROLA V600 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices
29. YES Select On YES 3 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Settings Voice control Voice settings Voice dialing On T39m 4 9 1 1 1 RECORDING FOR VOICE DIALING 1 Press Menu Key Scroll to Settings YES Voice control YES Voice Commanas YES Select Contacts YES Add voice YES 2 Find a contact name and follow the instructions in the display An icon will appear next to a contact name which has a voice command 3 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Settings Voice control Voice commands Contacts T39m 4 9 2 4 Note Noisy environment may affect voice recognition Record your voice in a quiet environment USING WITH SONY ERICSSON T68 T68i ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Go to Menu by pressing the joystick Scroll to Connect YES Select Bluetooth YES Select Options YES Operation mode YES On YES 2 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Connect Blue tooth Options Operation mode T68 8 3 2 T68i 8 4 or 3 for T68i H7 4 1 b PAIRING TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for
30. again for a short time to access headset pairing mode 4 Flip to open mode On the phone s Applications window scroll to Control Panel and tap it On the lower portion tap Connections index Tap Bluetooth Tap Devices index Bluetooth devices is displayed as sub title Tap Add The phone is now searching for pairable devices 5 Devices found are then displayed Tap the device you want to pair with your phone Bonding in progress will be displayed on screen and simultaneously the phone will ask for the pass key 6 On the lower left corner of the screen tap E Enter 0000 as the passkey then tap Done Also tap Done under the sub title Secure Connection If pairing is successful the alternating red blue lights will stop 7 Tap to exit and return to the Applications window If the pairing is unsuccessful the steps above may be repeated The unit is now ready to link calls from the phone directly to the Car Kit An icon will appear during the standby mode indicating that the Car Kit is linked with the phone ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit 1 Press the multi function button once to answer the call Pressing the button again will hang up and terminate the call 11 3 If you wish to answer the call on the cellular phone just press ok key and audio will be heard on the phone Pressing the multi function button will transfer the audio to the Car Kit
31. and on the Car Kit 1 2 Shortly press the multi function button once to answer the call To terminate the call do the same shortly press the multi function button once 19 e MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press Call key Audio will be heard on the Car Kit 2 Toterminate or hang up the call shortly press the multi function button Voice dialing Make a phone call by saying a voice name voice tag But first refer to step h and i for the procedure when recording for voice dialing 1 Press the multi function button once to activate voice dialing 2 A beep will then be heard on the Headset prompting the user to say the voice name voice tag of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 To terminate or hang up the call shortly press the multi function button Redialing Press the multi function button twice quickly to redial the last number AUDIO TRANSFER Audio transfer can be done during an ongoing call Car kit initiates transfer from kit to phone Press twice quickly the multi function button Car kit initiates transfer from phone to kit Shortly press the multi function button once Note Using your phone for audio transfer press L button to access Call Menu and transfer aud
32. ction button once or accessing the cell phone s menu during ongoing calls REJECTING A CALL Press the multi function button twice quickly to reject an incoming call USING WITH SIEMENS S55 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press Menu button Scroll to Setup SELECT Choose Connectivity SELECT 2 Scroll to Bluetooth Change The phone is now connecting with the Bluetooth device An icon will appear on the upper left corner when connected OPTIONS button may also be pressed Choose Activate BT then SELECT 3 Continue pressing the On Off End Key to exit from Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Doing this sequence once will either activate or deactivate the Bluetooth depending on your current setting Setup Connectivity Bluetooth 397 0756 7 772 ee E f PAIRING TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press Menu button Scroll to Setup SELECT Choose Connectivity SELECT Scroll to Bluetooth OPTIONS Scroll to Search for pre
33. designated by the Bluetooth indicator LED flashing Blue Note 1 Handsfree Pairing Mode From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for Handsfree Pairing Note 2 Headset Pairing Mode From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue E Press the multi function button again for a short time to access Headset Pairing Mode USING WITH SONY ERICSSON T39m a ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 2 Press Menu Key Scroll to Extras and press YES Select Operation mode YES On YES Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Extras Bluetooth Operation mode 1390 5 l o o6 O o b PAIRING TO THE CELLULAR PHONE 1 2 Bring the cellular phone at about 20 cm from the Car Kit From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Blueto
34. e dialing YES Edit name YES Add voice YES 2 Select a contact YES 10 3 Follow the instructions in the display An icon will appear next to a contact name which has a voice command 4 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Settings Voicecontro Voice commands Contacts Te 5 _ 8 amp 8 4 Settings Voice control Voice dialing Edit names 5 6 1 2 Note Record your voice command in a quiet place so that only your voice will be recorded on the phone USING WITH SONY ERICSSON P800 P900 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Flip to open mode On the phone s Applications window scroll to Control Panel and tap it using the stylus On the lower portion tap Connections index Tap Bluetooth Tap Settings index On the Operation mode tap On 2 Tap es to exit and return to the Applications window PAIRING TO THE CELLULAR PHONE 1 Bring the cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press the multi function button once
35. e repeated 4 Press the multi function button again to terminate the call Redialing Press twice quickly the multi function button to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls REJECTING A CALL Press the multi function button twice quickly to reject the incoming call RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 Press Menu and select Contacts and Search 2 Choose the name which you want to make a voice dial then press Details 3 Press Options and select Add voice tag Follow the instructions that are displayed Your voice will then be saved on the phone after it is played back to you 4 Continue pressing Back then finally Exit Note Record your voice command in a quiet place so that only your voice will be recorded on the phone USING WITH NOKIA 6650 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press Menu Scroll to Connectivity SELECT Bluetooth SELECT 2 Bluetoothoy SELECT Choose On SELECT An icon will appear on the display on the standby mode 3 Continue pressing Back to exit from Menu 33 QUICK ACCESS Press Menu followed by the sequence of numbers below Connectivity Bluetooth Bluetootho On Select 6650 11 1 1 1 1 PAIRING
36. e turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit Press Menu and select Settings Connectivity and Bluetooth Select Paired devices Choose the name of your device and press Options Select Request conn authorisation Select No Continue pressing Back then finally Exit Oo Rom ANSWERING RECEIVING A CALL When the phone is receiving a call same ring tone will be heard simultaneously on the Car Kit as well as on the phone 1 Pressthe multi function button once to answer the call 32 2 Pressing once again on the multi function button will terminate the call Note Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press CALL key As you dial audio and the keypad tones can be heard on the Car Kit not on the phone 2 Press the multi function button to terminate the call Voice dialing Refer to step h for the procedure when recording for voice dialing 1 Press once on the multi function button to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Saythe name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may b
37. eard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the multi function button again to terminate the call f AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls g ACTIVATING THE VOICE DIALING Use your phone when recording for voice dialing Before voice dialing you must first turn on the name dialing function and record your voice To turn voice dialing on and record number types T Go to Menu by pressing the joystick Scroll to Settings SELECT Voice control SELECT Voice dialing SELECT 2 Choose On SELECT 3 Continue pressing lt to exit h RECORDING FOR VOICE DIALING 1 Go to Menu by pressing the joystick Scroll to Settings and press SELECT Choose Voice control SELECT then go to Voice dialing SELECT Edit names SELECT New voice ADD 2 Find a contact then press SELECT 3 Follow the instructions that are displayed Voice is automatically saved on the phone An icon will appear next to a contact name which has a voice command 4 Continue pressing lt to exit Note Noisy environment may affect voice recognition Record your voice in a quiet environment 15 USING WITH SONY ERICSSON Z600
38. ext 7 Enter 0000 as the Device PIN and then tap Next 8 Tap Finish Note In Name you may or may not edit the name of your bonded device 9 For the question This Bluetooth device supports headset profile would you like to set it as your Blue tooth headset tap Yes tab 10 Tap ok and then V to exit The unit is now ready to link calls from the PC phone directly to the Car Kit An icon appears during the standby mode indicating that the Car Kit is linked with the PC phone If pairing is unsuccessful the steps above may be repeated ANSWERING RECEIVING A CALL When the phone is receiving a call two dissimilar ring tones will be heard on the phone and on the Car Kit 1 When answering is done on the Car Kit that is pressing the multi function button once the ongoing call can be heard from it 2 When answering is done on the phone ongoing call can be heard from the phone not on the Car Kit But if you wish to hear and transfer the call to the Car Kit just press once on the Car Kit s multi function button 3 To terminate the call press down the multi function button once 39 d MAKING A CALL with the Car Kit on Normal dialing With your Pocket PC Phone you can make a call using different methods Please refer to your PC Phone s User Guide The most direct method is by using the Phone keypad 1 Press button to bring up the dialer screen 2 Tap the number on the keypad and then tap key Note Ongo
39. g a contact press again center button of S9 key Choose Recall Select A statement Please Record Your Voice appears Press Ok 6 Follow the instructions on screen Voice is then saved on the phone Under Voice Dial list the name which already has a voice command appears 7 Continue pressing to exit o 2 Note Noisy environment may affect voice recognition Record your voice in a quiet environment USING WITH Qtek 2020 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your Pocket PC Phone and other Bluetooth devices 1 Tap Scroll down to Settings Tap Connections tab Tap Bluetooth 2 Select On and tap ok 3 Tap V to exit PAIRING TO THE CELLULAR PHONE 1 Bring your PC phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press the multi function button once again for a short time to access headset pairing mode 4 Tap Scroll down to Settings Tap Connections tab Tap Bluetooth 5 Tap Bonded Devices tab Tap New Your device now searches for Bluetooth devices and displays them in the list 6 Tap the name of the device that you want to bond with your PC phone and then tap N
40. g the cell phone s menu during ongoing calls REJECTING A CALL For T68i R6 and R7 press the multi function button twice to reject the incoming call ACTIVATING THE VOICE DIALING Use your phone when recording for voice dialing Before voice dialing you must first turn on the name dialing function and record your voice To turn voice dialing on and record number types Using T68 Sony Ericsson 1 Goto Menu by pressing the joystick Scroll to Settings YES Voice control YES 2 Voice settings YES Voice dialing YES Select On YES 3 Continue pressing NO to exit Using T68i Sony Ericsson 1 Goto Menu by pressing the joystick Scroll to Settings YES Voice control YES Voice dialing YES 2 Select On YES 3 Continue pressing NO to exit QUICK ACCESS Press Menu followed by the sequence of numbers below Voice Voice Voice Settings control settings dialing on T68 5 8 1 1 1 T68i 5 6 1 1 RECORDING FOR VOICE DIALING Using T68 Sony Ericsson 1 Go to Menu by pressing the joystick Scroll to Settings and press YES Choose Voice control YES Voice Commands YES Select a contact YES Add voice YES 2 Follow the instructions in the display An icon will appear next to a contact name which has a voice command 3 Continue pressing NO to exit Using T68i Sony Ericsson 1 Go to Menu by pressing the joystick Scroll to Settings and press YES Choose Voice control YES then go to Voic
41. hen press OK Waiting for with complete will be displayed simultaneously 5 Continue pressing Exit to get out of Menu and Pairing The Car Kit is paired and ready to use An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone Note Once paired press the multi function button once to establish simultaneous connection between the Car Kit and phone Keypad tones will then be heard on the Car Kit every time the keypad is pressed If ever the paired device was deleted and turned off when it is turned back on there s no need to undergo the same pairing procedure Passcode for will be displayed Enter the passcode then press OK Accept connection request from press YES to reconnect AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit 1 Press Menu 3 button Scroll to Connect OPTIONS Choose Open press SELECT Bluetooth OPTIONS Open SELECT Press S9 button Paired devices will be displayed as title 2 Select the Car Kit and press OPTIONS Scroll to Set as authorised SELECT Connections will take place without confirmation Continue press YES 3 Continue pressing Exit key to exit the Menu An icon will then appear on the upper right corner 30 d ANSWERING RECEIVING A CALL When the p
42. hone 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step h for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing Press twice quickly the multi function button to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls REJECTING A CALL Press twice quickly the multi function button to reject the incoming call RECORDING FOR VOICE DIALING Use your phone when recording voice dialing From standby mode press arrow up or down 2 Find a contact name to which you want to add a voice tag Press Details button The phone number will be displayed 3 Press Options button Add voice tag SELECT Press Start and say the name clearly Voice tag saved is displayed indicating that the voice tag has been saved 4 n case you wish to change your recorded voice press Names Voice tags SELECT Scroll to the name that you want to change the voice tag then press Op
43. hone is receiving a call simultaneous ring tone will be heard on the Car Kit as well as on the phone 1 Press the multi function button once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and send As you dial audio and the keypad tones can be heard on the Car Kit simultaneously but not on the phone 2 Press the multi function button to hang up and terminate the call Note If the call is terminated using the cellular phone a tone will be heard on the Car Kit indicating that the call has been terminated Voice dialing Refer to step h for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing Press twice quickly the multi function button to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls REJECT
44. in L is necessary in noisy background Control Switches Figure 4 The Microphone gain must be adjusted to match with your cell phone model If the gain is too high it can cause feedback whistling sound echo or background noise during calls on some cell phones Recommended Function Controls Note Setting Working on all models On high background environment MIC If you experience audio level ASP fluctuation turn ASP OFF TONE SETTING THE VOLUME There are two volume controls One is on the main unit See 4 on figure 1 The other is the volume key of your cell phone Use the volume control of the Car Kit and the volume keys of your cell phone Note If the volume set is too high it can cause feedback whistling sound echo or background noise during calls on some cell phones E ANSWERING RECEIVING A CALL When the phone is receiving a call the phone ring tone will be heard on the Car Kit Just press the multi function button 1 on the main unit to answer the call Pressing the button again will hang up and terminate the call Please refer to Car Kit Operations for Popular Cell Phones section on page 4 for additional information F MAKING A CALL Refer to Car Kit Operations For Popular Cell Phones section on page 4 Important Remarks e On some versions of Nokia s software the Car Kit will not connect automatically to the cell phone You will need to press the multi function button once to connect
45. in a quiet environment USING WITH NOKIA 8910i ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press Menu Scroll to Connectivity SELECT Bluetooth SELECT 2 Choose On SELECT An icon will appear on the display on the standby mode 3 Continue pressing Back to exit from Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Connectivit Bluetooth Select On Select 8910i 10 1 1 1 1 PAIRING TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press Menu Scroll to Connectivity SELECT Bluetooth SELECT and scroll to Search for audio accessories SELECT The phone is now searching for Bluetooth devices SELECT the Car Kit The phone will initiate connection with the Car Kit QUICK ACCESS for step 3 Press Menu followed by the sequence of numbers below Connectivity Bluetooth Search for audio accessories 8910i 10 1 2 4 Enter 0000 as the passcode then press OK The phone is now connected with the Car Kit 5 Continue pressing Back to e
46. ing a call ring tone will be heard on the phone and on the Car Kit 1 Shortly press the multi function button once to answer the call 2 Shortly press the multi function button once to terminate the call MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press Call key Touch Sending key Audio will be heard on the Car Kit 2 To terminate or hang up the call shortly press the multi function button Voice dialing Refer to step h and i for the procedure when activating and recording for voice dialing 1 Shortly press the multi function button once to activate voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the voice name of the person to call 3 Say the name The voice name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Shortly press the hang up button to terminate the call Redialing Press the multi function button twice quickly to redial the last number 21 AUDIO TRANSFER Audio transfer can be done during an ongoing call Car kit initiates transfer from kit to phone Press twice quickly the multi function button Car kit initiates transfer from phone to kit Shortly press the multi function button once Note Using your phone for audio transfer press lt gt button of the 5 way navigation key On the Call Menu choose
47. ing call will be heard on the phone and not immediately on the Car Kit You have to press once on the Car Kit s multi function button to transfer the sound to the Car Kit 3 To terminate the call press down the multifunction button once AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button once or accessing on the phone s Bluetooth Headset lt icon USING WITH SHARP GX32 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press to display Main Menu 2 Highlight Settings and then press to select 3 Succeedingly highlight and select Connectivity Bluetooth Bluetooth On Off and On 4 Continue pressing Back then finally Exit The Bluetooth setting is activated Bluetooth icon Dis displayed on standby mode screen PAIRING TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing Press to display Main Menu Highlight Settings and then press Q to select Succeedingly highlight and select Connectivity Bluetooth and Search for Devices The phone displays three categories Head
48. io by Selecting Use Handset or Use Bluetooth REJECTING A CALL Press the multi function button twice quickly to reject an incoming call ACTIVATING THE VOICE DIALING Use your phone when recording for voice dialing Before voice dialing you must first turn on the Voice Dial function and record your voice To turn voice dialing on 1 Press or to access Menu Scroll to Settings SELECT Scroll to Headset SELECT 2 Choose Voice Dial CHANGE Choose ON SELECT 3 Continue pressing Back to exit RECORDING FOR VOICE DIALING Note Voice dialing entries must be stored in the phone s memory not on the SIM card E 1 Press Q Or L to access Menu Scroll to Phonebook SELECT 2 Choose a contact which you want to have a voice name tag press VIEW then EDIT 3 On the Entry Details choose Store To and press CHANGE Choose Phone SELECT This is storing the number to phone memory 4 Highlight Voice Name then press RECORD Follow instructions on the screen Note You may use any word s or just the person s name for a voice name tag Note If recording is successful a statement Trained Voice Name appears An icon will appear next to Voice Name 5 Press DONE 6 Continue pressing wr key to exit Note In the listed names of your Phonebook a symbol appears next to a name which has a Voice Name This indicates that you can contact this person via voice dial 20 USING WITH MOTOROLA V80 A
49. ion button once Passcode for will be displayed Enter the passcode then press OK Accept connection request from press YES to reconnect AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit 1 Press the Menu button Scroll to Connect press Q Bluetooth press Press button Paired devices will be displayed as title 2 Select the Car Kit and press Scroll to Set as authorised and press to SELECT Connections will take place without confirmation Continue press YES 3 Continue pressing Exit key to exit the Menu An icon will then appear on the upper right corner ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit as well as on the phone 1 Pressthe multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and send As you dial audio and the keypad tones can be heard on the Car Kit simultaneously but not on the phone 2 Press the multi function button to hang up and terminate the call Note If the call is terminated using the cellular phone a tone will be heard on the Car
50. it to the cell phone If disconnection problem will be encountered on some Nokia cell phones kindly turn off the keypad tone of your cell phone CAR KIT OPERATIONS FOR POPULAR CELL PHONES Note 1 If your phone is not included in the following list of this manual kindly refer to the manual of your phone Note 2 Softwares and menus could be modified by the cell phone s manufacturers without prior notice If the manual does not match with your cell phone operations kindly refer to the manual of your cell phone Note 3 Multi pairing is now possible Ericsson T39mM e Purh tear Lana REPRE ta La iR ER 8 Sony Erlesson T68 T68i sadi E ehe Ru a ainiin odina enia 9 Sony Ericsson P800 P900 diuisio En LEE E exu ERE LO dr xw EO Eg wa Eua 12 SonyEricsson 1610 Louisa eae edd Rea ESQ UR ERU DIE 14 Sony Ericsson I628 3 15 Sony Erosson Z600 nb Eds auis Mun 17 SonyEricsson K700i aide Dee reci ifa cu o FA od tener bea datis 18 Motorola E398 date 20 Motorola 80 1 d Es es RD ewan 22 Motorola V600
51. ll Pressing the button again will hang up and terminate the call 2 f you wish to answer the call on the cellular phone just press YES and the call will be heard on the phone Pressing the multi function button will transfer the call to the Car Kit 3 To terminate the call press the multi function button again d MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press YES Audio will be heard on the Car Kit Simultaneously a question Retrieve call in phone will be displayed Ignoring or pressing No will retain the audio to the Car Kit Pressing Yes will transfer the audio to the cell phone 2 Press the multi function button to terminate the call Voice dialing Refer to step g and h for the procedure when activating and recording for voice dialing 1 Press the multi function button once to activate the voice dialing h 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing For T68i R6 and R7 press twice quickly the multi function button Call is automatically transferred to the Car Kit AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessin
52. ll then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate the call Redialing Press quickly the multi function button twice to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls REJECTING A CALL Press the multi function button twice to reject the incoming call 2h RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 Pressthe Names button Search SELECT Press List button 2 Find a contact name Press Details button 3 Press Options button Add voice tag SELECT Instructions appear Your voice is automatically saved on the phone after being played back to you 4 n case you wish to change your recorded voice press Options button Voice tags SELECT Change SELECT Instructions appear 5 Continue pressing Back button to exit Note Record your voice command in a quiet place so that only your voice will be recorded on the phone USING WITH NOKIA 8910 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press Menu
53. n the Car Kit every time keypad is pressed 26 C AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit 1 Press Menu Scroll to Bluetooth SELECT Scroll to View paired devices SELECT 2 Select the Car Kit and press OPTIONS Scroll to Request conn authorisation SELECT No SELECT 3 Continue pressing Back to exit from Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Bluetooth View paired devices Select 8910 ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit as well as on the phone 1 Pressthe multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and send As you dial audio and the keypad tones can be heard on the Car Kit simultaneously but not on the phone 2 Press the multi function button to hang up and terminate the call Note If the call is terminated using the cellular phone a tone will be heard on the Car Kit indicating that the call has been terminated Voice dialing Refer to step h for the procedure when recording for voice dialing 1
54. now ready to link calls from the phone directly to the Car Kit An icon will appear during the standby mode indicating that the Car Kit is linked with the phone ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit 1 Just press the multi function button down once to answer the call Pressing the button again will hang up and terminate the call 2 f you wish to answer a call on the cellular phone just press YES and the call is automatically transferred to the phone To transfer the call to the Car Kit Press Menu Key Scroll to Transfer Sound and press SELECT Choose the paired device and press SELECT 3 To terminate the call press the multi function button again MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and send Audio can be heard on the Car Kit simultaneously 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step g and h for the procedure when activating and recording for voice dialing 1 Press the multi function button once to activate the voice dialing 16 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the button again to terminate
55. onnection with each other Keypad tones can be heard on the Car Kit when keypad is pressed AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit 1 Press the Menu button Scroll to Bluetooth SELECT Scroll to View paired devices SELECT 2 Select the Car Kit and press OPTIONS Scroll to Request conn authorisation SELECT No SELECT 3 Continue pressing Back to exit from Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Bluetooth View paired devices Select 6310 63101 ANSWERING RECEIVING A CALL When the phone is receiving a call ring tones will be heard on the Car Kit as well as on the phone 1 Pressthe multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and send As you dial audio and the keypad tones can be heard on the Car Kit simultaneously but not on the phone 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step h for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep wi
56. or voice dialing 1 Press the multi function button once to activate the voice dialing 2 Beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 10 terminate the call press down the multifunction button once Redialing Press the multi function button twice quickly to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing down the multi function button once or accessing the cell phone s Menu during ongoing calls REJECTING A CALL Press the multi function button twice quickly to reject an incoming call ACTIVATING THE VOICE DIALING Use your phone when recording for voice dialing Before voice dialing you must first turn on the Voice Dial function and record your voice To turn voice dial on 1 Goto Menu by pressing 6 key Scroll to Contacts List Select 2 On the Contacts List choose Settings Select 3 Choose Voice Dial Select Choose On and press Ok 4 Continue pressing to exit RECORDING FOR VOICE DIALING 1 Goto Menu by pressing key Scroll to Contacts List Select 2 On the Contacts List scroll down to Voice Dial Select 38 Press Menu Choose Aad Select On the contact names listed choose the one you want to make a voice dial After choosin
57. oth SELECT 4 Scroll to My devices SELECT New device ADD The phone is now searching for pairable devices to be added Select the device you want to pair with your cell phone Press SELECT 14 5 Enter 0000 as the passkey then press OK If the pairing is successful the alternating red blue lights will stop 6 Continue pressing to exit from Menu The unit is now ready to link calls from the phone directly to the Car Kit An icon will appear during the standby mode indicating that the Car Kit is linked with the phone d ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit 1 Just press the multi function button down once to answer the call Pressing the button again will hang up and terminate the call 2 f you wish to answer a call on the cellular phone just press YES and audio will be heard on the phone Pressing the multi function button will transfer the call on the Car Kit 3 To terminate the call press the multi function button again e MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and press CALL button Audio is automatically transferred to the Car Kit 2 Press the multi function button to hang up and terminate the call Voice dialing Refer to step g and h for the procedure when activating and recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be h
58. oth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing Press the multi function button once again for a short time to access headset pairing mode Press Menu Key Scroll to Extras YES Select Bluetooth YES Select Paired devices YES Add device YES Choose Phone initiates YES Choose Headset YES The phone will then search the device to be added After the device is found press YES QUICK ACCESS for step 4 Press Menu then follow the sequence of numbers below Paired Add Phone Exifas BIU toot devices device initiates Headset T39m 5 6 2 Yes 1 2 5 Enter 0000 as the passkey If the pairing is successful the alternating red blue lights will stop Press YES to confirm the name of the device If pairing is unsuccessful the steps above may be repeated 6 Continue pressing NO to exit from Menu The unit is now ready to link calls from the phone directly to the Car Kit c ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit 1 2 3 Press the multi function button once to answer the call Note Pressing the button again will hang up and terminate the call If you wish to answer the call on the cellular phone just press YES and audio will be heard on the phone If you press once on the multi function button audio will be transferred to the Car Kit Pressing the multi f
59. s the Menu button Scroll to Bluetooth SELECT Press SELECT again 2 Choose On SELECT An icon will appear on the upper left corner 3 Press Back then Exit to get out of Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Blue tooth Select On Select 6310 10 1 1 1 6310i 11 1 1 1 PAIRING TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press Menu button Scroll to Bluetooth SELECT Scroll to Search for audio accessories SELECT The phone is now scanning for Bluetooth devices SELECT the Car Kit The phone will initiate connection with the Car Kit QUICK ACCESS for step 3 Press Menu followed by the sequence of numbers below Bluetooth Search for audio accessories 6310 10 2 6310i 11 2 4 Enter 0000 as the passcode then press OK The phone is now connected with the Car Kit 5 Continue pressing Back then finally Exit The Car Kit is paired and ready to use An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone 24 Note Once paired the Car Kit and phone have simultaneous c
60. set Car kit and All Choose Car Kit Note If you select All the phone lists devices from all categories o RO The phone now searches for Bluetooth devices to be paired When the search is complete devices found in the selected category are listed 6 Highlight the desired device for pairing and then press to select 7 Enter 0000 as the passcode then press ok 8 Continue pressing Back then finally Exit The Car Kit is paired and ready to use Bluetooth icon Q is displayed during the standby mode 40 ANSWERING RECEIVING A CALL When the phone is receiving a call two dissimilar tones will be heard on the Car Kit 1 When answering is done on the Car Kit that is pressing the multi function button once the ongoing call can be heard from it 2 When answering is done on the phone ongoing call can still be heard on the Car Kit 3 To terminate the call press the multi function button once MAKING A CALL with the Car Kit on Normal dialing 1 Using your phone enter the contact number and press Send key Audio will be heard on the Car Kit Note If at times when audio is heard on the phone just press once on the multi function button to transfer audio to the Car Kit 2 To terminate the call press down the multi function button once Redialing Press the multi function button twice quickly to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing down the multi fun
61. ss ACCESS button The phone is now searching for devices When the search is complete Devices disc is displayed as title If the device you are looking for is not on the list repeat the procedure by pressing the OPTIONS and REPEAT buttons Then press SELECT to add the device The phone will initiate connection with the Car Kit 41 4 Pis enter BT pin for OK Enter 0000 as the BT pin then press OK Handsfree trusted will be displayed afterwards indicating that the pairing is completed 5 Continue pressing the On Off End Key to exit from Menu The Car Kit is paired and ready to use An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard from the phone 1 Press the multi function button once to answer the call 2 Endthe call by pressing the button again Note Cell phone buttons can also be used to answer a call To transfer the call to the Car Kit press the multi function button once MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and Send To transfer audio on the Car Kit press the multi function button once 2 Press the multi function button again to hang up and terminate the call Note If the call is terminated using the cellular phone a tone will be heard on the Car Kit indicating that the call has been terminated Voice dialing Refer to step
62. the button again to terminate the call Redialing Press twice quickly the multi function button to redial the last number AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls REJECTING A CALL Press the multi function button twice to reject the incoming call RECORDING FOR VOICE DIALING Use your phone when recording voice dialing 1 Press the Names button Search SELECT 2 Find a contact Press Details button 3 Press Options button Add voice tag SELECT Follow instructions on the cell phone Your voice is automatically saved on the phone after being played back to you 4 n case you wish to change your recorded voice press Options button Voice tag SELECT Change SELECT Follow instructions on the cell phone 5 Continue pressing Back button to exit Note Record your voice command in a quiet place so that only your voice will be recorded on the phone USING WITH NOKIA 6600 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Pressthe Menu 3 key Using the joystick scroll to Connect press to select A list of options will be displayed Choose Bluetooth press to select 2 Bluetooth will be displayed Press to switch Bluetooth On 3 Continue pressing Exit key to exit the Menu PAIRING TO THE CELLULAR PHONE 1
63. tions Change SELECT Follow the instructions 29 5 Continue pressing Back to exit Note Noisy environment could affect voice recognition Record voice in a quiet environment USING WITH NOKIA 3650 ACTIVATING THE BLUETOOTH You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices 1 Press Menu 5 button Scroll to Connect OPTIONS A list of options will be displayed Choose OPEN then press SELECT Choose Bluetooth OPTIONS Choose OPEN and press SELECT 2 Bluetooth will be displayed Press OPTIONS Change SELECT Choose On then press OK 3 Continue pressing Exit PAIRING TO THE CELLULAR PHONE 1 Bringthe cellular phone at about 20 cm from the Car Kit 2 From the ON state press the multi function button for 10 seconds or until a distinctive three tone sound will be heard and at the same time the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue This indicates that the unit is now ready for pairing 3 Press Menu 36 button Scroll to Connect OPTIONS Choose Open press SELECT Bluetooth OPTIONS Open SELECT Press 5 button Paired devices will be displayed as title Press OPTIONS New paired device SELECT Searching for devices will be displayed Select the Car Kit and press SELECT Waiting for and Passcode for will be displayed simultaneously 4 Enter 0000 as the passcode t
64. u Scroll to Connectivity SELECT Bluetooth SELECT Scroll to View paired devices SELECT 2 Select the Car Kit and press OPTIONS Scroll to Request conn authorisation SELECT No SELECT 3 Continue pressing Back button to exit the Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Connectivity Bluetooth View paired devices 6650 11 1 4 ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit as well as on the phone 1 Pressthe multi function button once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and send As you dial audio and the keypad tones can be heard on the Car Kit simultaneously but not on the phone 2 Press the multi function button to hang up and terminate the call 34 Voice dialing Refer to step h for the procedure when recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 Atone will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cellular phone does not recognize the name spoken the steps above may be repeated 4 Press
65. unction button once again will terminate the call d MAKING ACALL with the Car Kit on Normal dialing 1 Enter the contact number and press YES Audio can be heard on the Car Kit Simultaneously a question Retrieve call in phone will be displayed Ignoring or pressing No will retain the call to the Car Kit Pressing Yes will transfer the audio to the cell phone 2 Press the multi function button to hang up and terminate the call 7 Voice dialing Refer to step f and g for the procedure when activating and recording for voice dialing 1 Press the multi function button once to activate the voice dialing 2 A beep will then be heard on the Car Kit prompting the user to say the name of the person to call 3 Say the name The name will be played back to you The phone will then place the call automatically In case the cell phone does not recognize the name spoken the steps above may be repeated 4 Press the multi function button once again to terminate the call AUDIO TRANSFER Audio Transfer can be done by pressing the multi function button or accessing the cell phone s menu during ongoing calls ACTIVATING THE VOICE DIALING Use your phone when recording for voice dialing Before voice dialing you must first turn on the name dialing function and record your voice To turn voice dialing on and record number types 1 Press Menu Key Scroll to Settings YES Voice control YES 2 Voice settings YES Voice dialing
66. ur recorded voice press Options button Voice tags SELECT Change SELECT Instructions appear 5 Press OrnvOff End key to exit Note Noisy environment may affect voice recognition Record your voice in a quiet place 42 43 44 45 46 This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Dieses Ger t befindet sich in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999 5 EG Che questo apparecchio conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE El equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE Dit toestel is in overeenstemming met de essenti le eisen en de andere relevante bepalingen van richtlijn1999 5 EG Este equipamento est conforme com os requisitos essenciais e outras disposic es da Directiva 1999 5 CE This equipment can be used in all European countries An individual license is required in Romania 47
67. vice you want to pair with your cell phone and then press Pair 37 6 Enter 0000 as the passkey then press Ok If the pairing is successful the alternating red blue lights will stop 7 Continue pressing to exit The unit is now ready to link calls from the phone directly to the Car Kit An icon appears during the standby mode indicating that the Car Kit is linked with the phone If pairing is unsuccessful the steps above may be repeated ANSWERING RECEIVING A CALL When the phone is receiving a call two dissimilar ring tones will be heard on the phone and on the Car Kit 1 When answering is done on the Car Kit that is pressing the multi function button once the ongoing call can be heard from it 2 When answering is done on the phone ongoing call can be heard from the phone not on the Car Kit But if you wish to hear and transfer the call to the Car Kit just press once on the Car Kit s multi function button 3 To terminate the call press down once on the multi function button MAKING A CALL with the Car Kit on Normal dialing 1 Using your phone enter the contact number and press SEND key Audio is heard on the phone and no immediate audio heard on the Car Kit yet You have to press once on the multi function button to transfer the audio to the Car Kit 2 160 terminate the call press down once on the multifunction button Voice dialing Refer to step h and i for the procedure when activating and recording f
68. xit from Menu The Car Kit is paired and ready to use An icon will be displayed during the standby mode indicating that the Car Kit is linked with the phone Note Once paired the Car Kit and the phone have simultaneous connection Keypad tones can be heard on the Car Kit every time the keypad is pressed AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Bluetooth Car Kit 1 Press Menu Scroll to Connectivity SELECT Bluetooth SELECT Scroll to View paired devices SELECT 28 d 2 Select the Car Kit and press OPTIONS Scroll to Request conn authorisation SELECT No SELECT 3 Continue pressing Back to exit from Menu QUICK ACCESS Press Menu followed by the sequence of numbers below Connectivity Bluetooth View paired devices Select 891 0i 10 1 4 Options ANSWERING RECEIVING A CALL When the phone is receiving a call a ring tone will be heard on the Car Kit as well as on the phone 1 Press the multi function button down once to answer the call 2 End the call by pressing the button again Note Cell phone buttons can also be used to answer a call but audio will still be heard on the Car Kit MAKING A CALL with the Car Kit on Normal dialing 1 Enter the contact number and Send As you dial audio and keypad tones are simultaneously heard on the Car Kit No audio on the p
69. y of the batteries must be in the spring side Note Microphone battery life is more than 500 calls if 3 calls day battery life 2 more than 5 months 2 Itis highly recommended that you attach your microphone to the sun visor See figure 3 Please make sure that it does not hide the microphone otherwise your voice will be attenuated 3 Turn ON the microphone by using the power switch Power Switch ON OFF Wireless Microphone Illustration MICROPHONE Microphone Indicator low battery normal SUN VISOR med NA CLIP Figure2 7 Clip MENGA REMARKS B If microphone is not ON during a communication the sound on the speaker will be attenuated B In standby mode the microphone will still have a small consumption less than 1 8 microwatts B On some versions the indicator light will only turn ON for 2 seconds after the microphone is switched ON If the light is red this indicates low battery f The microphone is activated by the Hands Free Car Kit base and can remain in ON position even if not used But in order to extend battery life it is recommended to switch OFF your microphone when you won t use it for a long time FUNCTI ON CONTROLS Adjust the Function Controls as recommended 1 Tone Control H for High Tone L for Low Tone 2 ASP Control ON Echo and Feedback Canceller OFF Echo Reducer only 3 Adjustable Microphone Gain MIC Control H for high gain L for low ga

Download Pdf Manuals

Related Search

Related Contents

JVC CA-MXGA3V User's Manual  11病児保育室  Fluke 2620A Power Supply User Manual  BOtanique - Ville de Metz  Vacuum Pump Oil_L170_QT_PS.indd  Guía del usuario    Asahi Pentax WG-10 Quick Guide  Sony DPF-P7D User's Manual  

Copyright © All rights reserved. Failed to retrieve file