Saturn 2010 Automobile User Manual
Contents
1. 2 ANALOG DIGITAL THEATRE 01 number buttons enter the second and third digits within two seconds To select a digital channel using the Digital Electronic Programme Guide EPG see page 14 In digital mode An information banner appears briefly The following icons may be indicated on the banner Interactive service is available MHEG Digital Text Interactive service MHEG Digital Text is currently disabled Radio service Scrambled Subscription service Multiple audio languages available Subtitles available Subtitles available for the hearing impaired Recommended minimum age for current programme from 4 to 18 years Parental Lock Current programme is being recorded Additional operations To Do this Turn on the TV Press DK Press 41 to set the from Standby mode volume level without sound Adjust the volume Press 1 increase decrease Access the Press To select an analogue Programme index channel press 4 7 then press table in analogue mode only 1 Press 5 on the TV top side to switch on the TV When the TV is in standby mode the o standby indicator on the TV front is red press I D on the remote to switch on the TV 2 Press DIGITAL to switch to digital mode or ANALOG to switch to analogue mode The channels available vary depending on the mode 120 To access Text Press Each time you press the2. AV4 AV5 and PC mode Adv Contrast Automatically adjusts Backlight and Contrast to the most suitable settings Enhancer judging from the brightness of the screen This setting is especially effective for dark images scenes It will increase the contrast distinction of the darker picture scenes Reset Resets all picture settings except Picture Mode and Display Mode only in PC mode to the factory settings od Brightness Colour Sharpness and Adv Contrast Enhancer are not available when Picture Mode is set to Vivid or when Display Mode is set to text 22 Sound Adjustment menu You can select the options listed below on the Sound menu To select options in Settings see Navigating through menus page 20 Sound Effect Selects the sound mode Standard Enhances clarity detail and sound presence by using BBE High definition Sound System Dynamic Intensifies clarity and sound presence for better intelligibility and musical realism by using the BBE High definition Sound System BBE ViVA BBE ViVA Sound provides musically accurate natural 3D image with Hi Fi sound The clarity of the sound is improved by BBE while the width depth and height of sound image are expanded by BBE s proprietary 3D sound process BBE ViVA Sound is compatible with all TV programs including news music dramas movies spo
3. The TV turns off automatically the TV enters standby mode Check if the Sleep Timer or the Off Time are activated page 26 f no signal is received and no operation is performed in the TV mode for 10 minutes the TV automatically switches to standby mode The TV turns on automatically Check if the Time is activated page 26 Some input sources cannot be selected Select AV Preset and cancel Skip of the input source page 27 The remote does not function Replace the batteries A channel cannot be added to the Favourite list Up to 999 channels can be stored in the Favourite list equipment does not appear on Device List Check that your equipment is HDMI control compatible equipment
4. Continued 27 98 ANNIN USN HDMI Set up This is used to set the HDMI control compatible equipment connected to the HDMI sockets Note that the interlock setting must also be made on the connected HDMI control compatible equipment side HDMI Control This sets whether to interlock the HDMI control compatible equipment and the TV When set to the following menu items can be performed Auto Devices Off When this is set to On the HDMI control compatible equipment turn on and off interlocked with the TV Auto TV On When this is set to the TV turns on interlocked with the HDMI control compatible equipment Device List Update Creates or updates the HDMI Device List Up to 11 HDMI control compatible equipment can be connected and up to 5 equipment can be connected to a single socket Be sure to update the HDMI Device List when you change the HDMI control compatible equipment connections or settings HDMI Device List Displays the connected HDMI control compatible equipments Sound Offset Sets an independent volume level to each equipment connected to the TV Manual Programme Preset Before selecting Label AFT Audio Filter Skip Decoder press 4 7 to select the programme number you want to modify Then press System Presets programme channels manually 1 Press 4 7 to select System then press 2 Press 4 7 to
5. M T7698 apiny dn uejs Safety information Installation Set up Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire electrical shock or damage and or injuries Installation The TV set should be installed near an easily accessible mains socket Place the TV set on a stable level surface Only qualified service personnel should carry out wall installations For safety reasons it is strongly recommended that you use Sony accessories including KDL 40P30xx KDL 37P30xx KDL 32P30xx KDL 40U30xx KDL 37U30xx KDL 32U30xx Wall mount bracket SU WL500 KDL 26P30xx KDL 26U30xx KDL 26S30xx KDL 26S28xx KDL 26T28xx KDL 26T26xx Wall mount bracket SU WL100 Transporting Before transporting the TV set disconnect all cables Two or three people are needed to transport a large TV set When transporting the TV set by hand hold it as shown on the right Do not put stress on the LCD panel and the frame around the screen J When lifting or moving the TV set hold it firmly from the bottom When transporting the TV set do not subject it to jolts or excessive vibration When transporting the TV set for repairs or when moving pack it using the original carton and packing material Ventilation Never cover the ventilation holes or insert anything in the cabinet Leave space around the TV set as shown below
6. Some digital channels may broadcast several audio languages for a programme Audio Description Provides audio description narration of visual information if TV channels broadcast such information Mixing Level Adjusts the TV main audio and Audio Description output levels LA option is only available when Audio Description is set to Banner Mode Basic Displays programme information with a digital banner Full Displays programme information with a digital banner and displays detailed programme information below that banner Radio Display The screen wallpaper is displayed when listening to a radio broadcast after 20 seconds without pressing any button You can select the screen wallpaper colour or display a random colour To cancel the screen wallpaper display temporarily press any button Parental Lock Sets an age restriction for programmes Any programme that exceeds the age restriction can only be watched after a PIN Code is entered correctly 1 Press the number buttons to enter your existing PIN code If you have not previously set a PIN a PIN code entry screen appears Follow the instructions of PIN Code below 2 Press 4 to select the age restriction or None for unrestricted watching then press 3 Press RETURN PIN Code To set your PIN for the first time 1 Press the number buttons to enter the new PIN code 2 Press RETURN To change your PIN 1 Press the number butto
7. a pre recorded tape into the VCR connected to the TV page 4 and start play back The video channel will be located and stored on the TV during auto tuning If no VCR is connected to the TV skip this step Press N Auto Tuning Do you want to start automatic tuning The starts searching for all available digital channels followed by all available analogue channels This may take some time so do not press any buttons on the TV or remote while proceeding If a message appears for you to confirm the aerial connection No digital or analogue channels were found Check all the aerial connections and press to start auto tuning again 3 When the Programme Sorting menu appears on the screen follow the steps of Programme Sorting page 27 If you do not change the order in which the analogue channels are stored on the TV go to step 4 4 Press MENU to exit The TV has now tuned in all the available channels f When a digital broadcast channel cannot be received or when selecting a region in which there are no digital broadcasts in step 4 page 7 the time must be set after performing step 4 Detaching the Table Top Stand from the TV n Do notremove the Table Top Stand for any reason other than to wall mount the TV KDL 40P30xx KDL 37P30xx KDL 40U30xx KDL 37U30xx KDL 32P30xx KDL 26P30xx KDL 32U30xx KDL 26U30xx KDL 26S30xx KDL 26S28xx KDL 26T28xx KDL 26T26xx T
8. break by the impact and cause serious injury Ifthe surface of the TV set cracks do not touch it until you have unplugged the mains lead Otherwise electric shock may result When not in use Ifyou will not be using the TV set for several days the TV set should be disconnected from the mains for environmental and safety reasons Asthe TV setis not disconnected from the mains when the TV set is just turned off pull the plug from the mains to disconnect the TV set completely However some TV sets may have features that require the TV set to be left in standby to work correctly For children Do not allow children to climb on the TV set Keepsmall accessories out of the reach of children so that they are not mistakenly swallowed If the following problems occur Turn off the TV set and unplug the mains lead immediately if any of the following problems occur Ask your dealer or Sony service centre to have it checked by qualified service personnel When Mains lead is damaged Poor fitting of mains socket TV set is damaged by being dropped hit or having something thrown at it Any liquid or solid object falls through openings in the cabinet Precautions Viewing the TV View the TV in moderate light as viewing the TV in poor light or during long period of time strains your eyes When using headphones adjust the volume so as to avoid excessive levels as hearing damage may resul
9. detergent solution Never use any type of abrasive pad alkaline acid cleaner scouring powder or volatile solvent such as alcohol benzene thinner or insecticide Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material When adjusting the angle of the TV set move it slowly so as to prevent the TV set from moving or slipping off from its table stand Optional Equipment Keep optional components or any equipment emitting electromagnetic radiation away from the TV set Otherwise picture distortion and or noisy sound may occur 9 cB Overview of the remote 10 1 05 TV standby Turns the TV on and off from standby mode NB Dual Sound page 23 Coloured buttons page 13 14 16 Input select Text hold n TV mode Selects the input source from equipment connected to the TV sockets page 18 n Text mode page 13 Holds the current page AN KIIO Q TOOLS page 13 19 Enables you to access various viewing options and change make adjustments according to the source and screen format Q MENU page 20 Q THEATRE You can set Theatre Mode on or off When Theatre Mode is set to on the optimum audio output if the TV is connected with an audio system using an HDMI cable and picture quality for film videos are automatically set Number buttons In TV mode Selects channels For ch
10. display changes cyclically as follows Text Text over the TV picture mix mode No Text exit the Text service To select a page press the number buttons or PROG To hold a page press 3 To reveal hidden information press 9 When four coloured items appear at the bottom of the Text page Fastext is available Fastext allows you to access pages quickly and easily Press the corresponding coloured button to access the page Picture Freeze Freezes the TV picture e g to make a note of a telephone number or recipe Press on the remote control Press 4 7 afe to adjust the position of the window 1 2 3 Press to remove the window 4 Press again to return to normal TV mode Not available for AV4 AV5 and PC input To change the screen format manually to suit the broadcast Press amp repeatedly to select the desired screen format Smart Displays conventional 4 3 broadcasts with an imitation wide screen effect The 4 3 picture is stretched to fill the screen Displays conventional 4 3 broadcasts e g non wide screen TV in Displays wide screen 16 9 broadcasts in the correct proportions the correct proportions Displays cinemascopic letter box format broadcasts in the correct proportions Displays 14 9 broadcasts in the correct proportions As a result black border areas are visible on the s
11. specifications are subject to change without 10 W 10 W RMS notice Optional Accessories Wall Mount Bracket SU WL500 KDL 40P30xx KDL 37P30xx KDL 32P30xx KDL 40U30xx KDL 37U30xx KDL 32U30xx Wall Mount Bracket SU WL100 KDL 26P30xx KDL 26U30xx KDL 26S30xx KDL 26S28xx KDL 26T28xx KDL 26T26xx PC Input Signal Reference Chart for PC Horizontal Signals Horizontal Pixel Vertical Line frequency venice frequency Hz Standard kHz VGA 640 480 31 5 60 VGA SVGA 800 600 37 9 60 VESA Guidelines XGA 1024 768 48 4 60 VESA Guidelines WXGA 1280 768 47 4 60 VESA 1280 768 47 8 60 VESA This TV s PC input does not support Sync on Green or Composite Sync This TV s PC input does not support interlaced signals This TV s PC input supports signals in the above chart with a 60 Hz vertical frequency For other signals you will see the message NO SYNC PC Input Signal Reference Chart for HDMI IN 4 5 Horizontal Signals Horizontal Pixel Vertical Line frequency Hz Standard kHz VGA 640 480 31 5 60 VGA SVGA 800 600 37 9 60 VESA Guidelines XGA 1024 768 48 4 60 VESA Guidelines WXGA 1280 768 47 4 60 VESA WXGA 1280 768 47 8 60 VESA WXGA 1360 768 47 7 60 VESA 33 jeuonippy I Troubleshooting Check whether the 5 standby indicator is flashing in red When it is flashing The self diagnosis function is activated 1 Co
12. then press Q To exit the menu press MENU Analogue Digital Digital EPG External Inputs Settings Q Digital Favourites Displays the Favourite list For details about settings see page 16 Analogue Returns to the last viewed analogue channel Digital Returns to the last viewed digital channel Digital EPG Displays the Digital Electronic Programme Guide EPG For details about settings see page 14 20 External Inputs Selects equipment connected to your TV To watch the desired external input select the input source then press Q Settings Displays the Settings menu where most of the advanced settings and adjustments are performed 1 Press 4 to select a menu icon then press 2 Press 4 7 lt 9 gt to select an option or adjust a setting then press For details about settings see page 21 to 31 f The options you can adjust vary depending on the situation Unavailable options are greyed out or not displayed This function may not be available in some countries regions Picture Adjustment menu You can select the options listed below on the Picture menu To select options in Settings see Navigating through menus page 20 Picture Mode Selects the picture mode except for PC input source Vivid For enhanced picture contrast and sharpness Standard For standard picture Recommended for home entertainm
13. tis strongly recommended that you use a Sony wall mount bracket in order to provide adequate air circulation Installed on the wall 30 cm i10 cm CT Leave at least this space around the set 8 cB Installed with stand Leave at least this space around the set Toensure proper ventilation and prevent the collection of dirt or dust Do not lay the TV set flat install upside down backwards or sideways Do not place the TV set on a shelf rug bed or in a closet Do not cover the TV set with a cloth such as curtains or items such as newspapers etc Do not install the TV set as shown below Air circulation Air circulation is blocked is blocked Mains lead Handle the mains lead and socket as follows in order to avoid any risk of fire electrical shock or damage and or injuries Use only Sony mains leads not those of other brands Insert the plug fully into the mains socket Operate the TV set on a 220 240 V AC supply only When wiring cables be sure to unplug the mains lead for your safety and take care not to catch your feet on the cables Disconnect the mains lead from the mains socket before working on or moving the TV set Keep the mains lead away from heat sources Unplug the mains plug and clean it regularly If the plug is covered with dust and it picks up moisture its insulation may deteriorate whic
14. 0xx KDL 26T26xx SS O e If using an electric screwdriver set the tightening torque at approximately 2 N m 20 kgf cm Continued 5 GB 4 Preventing the TV from toppling over 5 Install a wood screw 4 mm in diameter not supplied in the TV stand Install a machine screw M5 x 12 not supplied into the screw hole of the TV Tie the wood screw and the machine screw with a strong cord Bundling the cables 6 Selecting the language country region and location Ela 3 4 5 Connect the TV to your mains socket 220 240V AC 50Hz Press D on the TV top side When you switch on the TV for the first time the Language menu appears on the screen N Press 4 to select the language displayed on the menu screens then press ERE P a on eee Press 6 9 to select the country region in which you will operate the TV then press If the country region in which you want to use the eo TV does not appear in the list select instead of a country region D Press 4 4 to select the location type in which you will operate the TV then press This option selects the initial picture mode appropiate for the typical lighting condition in these enviroments T Auto tuning the TV 1 Before you start auto tuning the TV insert
15. Power will be turned off appears on the screen one minute before the TV switches to standby mode Clock Set Allows you to adjust the clock manually When the TV is receiving digital channels the clock cannot be adjusted manually since it is set to the time code of the broadcasted signal Timer Sets the timer to turn on off the TV Timer Mode Selects the desired period On Time Sets the time to turn on the TV Off Time Sets the time to turn off the TV 2698 Set up menu You can select the options listed below on the Set up menu To select options in Settings see 1L LLLI Navigating through menus page 20 vinv 26 gt gt gt gt gt gt MENU Auto Start Up Starts the first time operation menu to select the language country region and location and tune in all available digital and analogue channels Usually you do not need to do this operation because the language and country region will have been selected and channels already tuned when the TV was first installed page 7 However this option allows you to repeat the process e g to retune the TV after moving house or to search for new channels that have been launched by broadcasters Language Selects the language in which the menus are displayed Auto Tuning Tunes in all the available analogue channels Usually you do not need to do this operation because the channels ar
16. VB T Colour Video System Analogue PAL SECAM NTSC 3 58 4 43 only Video In Digital MPEG 2 MP ML Aerial 75 ohm external terminal for VHF UHF Channel Coverage Analogue 48 25 855 25 MHz Digital VHF Band 177 5 226 5 MHz UHF E21 E69 474 858 MHz Terminals 1 53 1 21 pin Scart connector CENELEC standard including audio video input RGB input and TV audio video output lt 2 SMARTLINK 21 pin Scart connector CENELEC standard including audio video input RGB input selectable audio video output and SMARTLINK interface Supported formats 10801 720p 576p 576i 480p 480i Y 1 Vp p 75 ohms 0 3V negative sync 0 7 Vp p 75 ohms Pr Cr 0 7 Vp p 75 ohms 3 Audio input phono jacks 500 mVrms Impedance 47 kilo ohms HDMI IN 4 5 Video 10801 720p 576p 576i 480p 480i Audio Two channel linear PCM 32 44 1 and 48 kHz 16 20 and 24 bits PC see table Analogue audio phono jacks 500 mVrms Impedance 47 kilohms HDMI IN 4 only S 36 S video input 4 pin mini DIN 236 Video input phono jack 6 Audio input phono jacks C Audio output Left Right phono jacks PC lt PC Input 15 Dsub see page 17 G 0 7 Vp p 75 ohms non Sync on Green B 0 7 Vp p 75 ohms non Sync on Green R 0 7 Vp p 75 ohms non Sync on Green HD 1 5 Vp p VD 1 5 Vp p PC audio input minijack Q Headphones jack E CAM Conditional Access Module slot Sound Output Design and
17. annel numbers 10 and above enter the second and third digit quickly n Text mode Enters the three digit page number to select the page C Previous channel Returns to the previous channel watched for more than five seconds PROG 4 E2 69 n TV mode Selects the next or previous channel n Text mode page 13 Selects the next amp 4 or previous page X Mute the sound a Volume Text page 13 DIGITAL Digital mode page 12 ANALOG Analogue mode page 12 RETURN Returns to the previous screen of any displayed menu m EPG Digital Electronic Programme Guide page 14 D en Picture freeze page 13 Freezes the TV picture 2 Screen mode page 13 O Info Text reveal In digital mode Displays brief details of the programme currently being watched n analogue mode Displays information such as current channel number and screen format n Text mode page 13 Reveals hidden information e g answers to a quiz The number 5 PROG and buttons have tactile dots Use the tactile dots as references when operating the TV If you turn the TV off Theatre Mode is also turned off Overview of the TV buttons and indicators mwenu page 20 7 Input select OK In TV mode Selects the input source from equipment connected to the TV sockets page 18 In TV menu Selects the menu or option and
18. camcorder to the video socket 236 and the S video socket S 36 at the same time If you connect mono equipment connect to the L socket 6 PC To see the equipment connected to 8 It is recommended to use a PC cable with ferrites To connect Do this Headphones ll Connect to the socket to listen to sound from the TV on headphones Conditional To use Pay Per View services Access Module For details refer to the instruction CAM manual supplied with your CAM To use the CAM remove the rubber cover from the CAM slot Switch off the TV when inserting your CAM into the CAM slot When you do not use the CAM we recommend that you replace the cover on the CAM slot CAM is not supported in all countries Please check with your authorized dealer Hi Fi audio equipment Connect to the audio output sockets G to listen to the sound from the TV on Hi Fi audio equipment Additional operations To Do this Return to normal TV Press DIGITAL or ANALOG mode Access the Digital Press Favourites in digital For details see page 16 mode only Change the volume of Press 4 the connected HDMI control compatible audio system Mute the sound of the Press 5X connected HDMI Press again to restore control compatible audio system Using the Tools menu Press TOOLS to display the following options when viewing pictures from connected equipment Options Description Clo
19. confirms the setting ee In TV mode Increases or decreases the volume In TV menu Moves through the options right or left PROG 0 n TV mode Selects the next or previous channel In TV menu Moves through the options up or down Power Turns the TV on or off To disconnect the TV completely pull the plug from the mains Picture Off Timer indicator Lights up in green when the picture is switched off page 25 Lights up in orange when the timer is set page 26 5 Standby indicator Lights up in red when the TV is in standby mode Power Timer REC programme indicator Lights up in green when the TV is turned on Lights up in orange when the timer recording is set page 14 Lights up in red during the timer recording Remote control sensor Receives IR signals from the remote Do not put anything over the sensor as its function may be affected f Make sure that the TV is completely turned off before unplugging the mains lead Unplugging the mains lead while the TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction 116 Watching TV Watch i ng TV 3 Press the number buttons or PROG to select a TV channel To select channel numbers 10 and above using the g
20. creen Parts of the top and bottom of the picture may be cut off HD signal source pictures can only be displayed in Wide mode Youcannot use this function while the digital banner is displayed Some characters and or letters at the top and the bottom of the picture may not be visible in Smart mode In such a case you can select V Size using the Screen menu and adjust vertical size to make it visible When Auto Format is set to On the TV will automatically select the best mode to suit the broadcast page 25 Youcan adjust the position of the picture when selecting Smart 50Hz 14 9 or Zoom Press to move up or down e g to read subtitles Using the Tools menu Press TOOLS to display the following options when viewing a TV programme Options Description Close Closes the Tools menu Picture Mode See page 21 Sound Effect See page 23 Speaker See page 24 Audio Language in See page 31 digital mode only Subtitle Setting in See page 31 digital mode only Sleep Timer See page 26 Power Saving See page 25 System Information Displays the system digital mode only information screen 13 AL BuruajeM Checking the Digital Electronic Programme Guide EPG D3 All Categories Fri 3 Nov 15 39 Select 4 1 day on off Options 1 n digital mode press 2 Perform the desired operation a
21. e already tuned when the TV was first installed page 7 However this option allows you to repeat the process e g to retune the TV after moving house or to search for new channels that have been launched by broadcasters Programme Sorting Changes the order in which the analogue channels are stored on the TV 1 Press V to select the channel you want to move to a new position then press gt 2 Press 44 to select the new position for your channel then press AV Preset Assigns a name to any equipment connected to the side and rear sockets The name will be displayed briefly on the screen when the equipment is selected You can skip an input source that is not connected to any equipment 1 Press 4 7 to select the desired input source then press 2 Press 4 7 to select the desired option below then press AVI or AV2 AV3 AVA AVS AV6 PC VIDEO DVD CABLE GAME CAM SAT Uses one of the preset labels to assign a name to connected equipment Edit Creates your own label 1 Press 4 7 to select the desired letter or number for a blank space then press gt If you input a wrong character Press lt 5 gt to select the wrong character Then press 4 7 to select the correct character 2 Repeat the procedure in step 1 until the name is completed 3 Select OK then press Skip Skips an input source that is not connected to any equipment when you press to select the input source
22. ect a VCR to the C9 3 2 socket you can then record from the equipment connected to other sockets of the TV TV Outputs a broadcast Auto Outputs whatever is being viewed on the screen Not available for AVA AV5 and PC RGB Centre Adjusts the horizontal picture position so that the picture is in the middle of the screen This option is only available if an RGB source has been connected to the Scarts connectors C9 1 1 or C gt 2 23 2 on the rear of the TV Continued 25 GB PC Adjustment Customizes the TV screen as a PC monitor This option is only available if you are in Mode Phase Adjust the screen when a part of a displayed text or image is not clear Pitch Enlarges or shrinkes the screen size horizontally H Centre Moves the screen to the left or to the right V Lines Corrects the picture lines while viewing an RGB input signal from the PC connector Power saving Turns to standby mode if no PC signal is received Reset Resets to the factory settings Timer Sets the timer to turn on off the TV Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode When the Sleep Timer is activated the Timer indicator on the TV front lights up in orange Key If you switch off the TV and switch it on again Sleep Timer is reset to Off Sleep timer will end soon
23. ent Cinema For viewing film based content Most suitable for viewing in a theatre like environment This picture setting was developed in collaboration with Sony Pictures Entertainment to faithfully reproduce movies as intended by their creators Display Mode only Selects the display mode for PC input source i PC mode Video For video images Text For text charts or tables Backlight Adjusts the brightness of the backlight z m c Contrast Increases or decreases picture contrast m Brightness Brightens or darkens the picture S o Colour Increases or decreases colour intensity Hue Increases or decreases the green tones Hue can only be adjusted for an NTSC colour signal e g U S A video tapes Sharpness Sharpens or softens the picture Colour Tone Adjusts the whiteness of the picture Cool Gives the white colours a blue tint Neutral Gives the white colours a neutral tint Warm Gives the white colours a red tint Warm can not be selected when you set Picture Mode to Vivid Continued 2105 Noise Reduction Reduces the picture noise snowy picture in a weak broadcast signal Auto Automatically reduces the picture noise in analogue mode only High Mid Low Modifies the effect of the noise reduction Off Turns off the Noise Reduction feature Auto is not available for 3
24. equipment When installing optional equipment leave some space between the optional equipment and the TV Check the aerial connection Keep the aerial cable away from other connecting cables Picture or sound noise when viewing a TV channel Adjust AFT Automatic Fine Tuning to obtain better picture reception page 28 Some tiny black points and or bright points appear on the screen The picture of a display unit is composed of pixels Tiny black points and or bright points pixels on the screen do not indicate a malfunction 34 No colour on programmes Select Reset page 22 No colour or irregular colour when viewing a signal from the 33 sockets e Check the connection of the 33 sockets and check if each sockets are firmly seated in their respective sockets Sound No sound but good picture Press A or 2X Mute Check if the Speaker is set to TV Speaker page 24 Channels The desired channel cannot be selected Switch between digital and analogue mode and select the desired digital analogue channel Some channels are blank Scrambled Subscription only channel Subscribe to the pay TV service Channelis used only for data no picture or sound Contact the broadcaster for transmission details Digital channels are not displayed Contacta local installer to find out if digital transmissions are provided in your area Upgrade to a higher gain aerial General
25. equipment such as a TV DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables Be sure to correctly connect and set the compatible equipment to use the HDMI control function To connect the HDMI control compatible equipment Connect the compatible equipment and the TV with an HDMI cable When connecting an audio system in addition to the HDMI cable be sure to also connect the audio output socket G of the TV and the audio system For details see page 17 To make the HDMI control settings HDMI control must be set on both the TV side and the connected equipment side See HDMI Set up page 28 for the TV side settings See the operating instructions of the connected equipment for setting details HDMI control functions Turns the connected equipment off interlocked with the TV Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play f you turn on a connected audio system while the TV is on the input switches to the audio from the audio system Adjusts the volume and mutes the sound of a connected audio system 19 jueuidinb3 jeuondg j Navigating through menus MENU allows you to enjoy various convenient features of this TV You can easily select channels or inputs sources and change the settings for your TV 1 Press MENU 2 Press 0 0 to select an option
26. es KDL 26xxxxx 26 inches Display Resolution 1 366 dots horizontal x 768 lines vertical Power Consumption KDL 40xxxxx 165 W or less KDL 37xxxxx 150 W or less KDL 32xxxxx 130 W or less KDL 26xxxxx 90 W or less Standby Power Consumption KDL 40xxxxx 0 6 W or less KDL 37xxxxx 0 6 W or less KDL 32xxxxx 0 7 W or less KDL 26xxxxx 0 7 W or less Specified standby power is reached after the TV finishes necessary internal processes Dimensions w x h x d KDL 40xxxxx Approx 982 x 690 x 265 mm with stand Approx 982 x 643 x 124 mm without stand KDL 37xxxxx Approx 906 x 658 x 265 mm with stand Approx 906 x 611 x 126 mm without stand KDL 32xxxxx Approx 790 x 577 x 214 mm with stand Approx 790 x 530 x 119 mm without stand KDL 26xxxxx Approx 657 x 500 x 214 mm with stand Approx 657 x 453 x 121 mm without stand Mass KDL 40P30xx KDL 40U30xx Approx 23 5 kg with stand Approx 20 0 kg without stand KDL 37P30xx KDL 37U30xx Approx 21 0 kg with stand Approx 18 0 kg without stand KDL 32P30xx KDL 32U30xx Approx 15 0 kg with stand Approx 13 0 kg without stand KDL 26P30xx KDL 26U30xx Approx 12 0 kg with stand Approx 10 0 kg without stand KDL 26Sxxxx KDL 26Txxxx Approx 12 5 kg with stand Approx 10 5 kg without stand Panel System LCD Liquid Crystal Display Panel 3298 TV System Depending on your country region selection Analogue B G H D K L I Digital D
27. ge restriction for programmes has been selected a message asking for a PIN code will appear on the screen For details see Parental Lock on page 31 15 Using the Digital Favourite list D 3 S wees o 2 ax Favourite Set up gramme Favourites 1 001 SETenvEO 002 Tienda en VEO 003 005 006 007 Telecinco 009 TELEDEPORTE TS Estrellas 010 VEO T5 Sport Previous Next Favourites2 Select FTN GEGEN Back RETURN Digital Favourite list The Favourite feature allows you to specify up to four lists of your favourite programmes 1 Press MENU 2 Press 9 3 to select Digital Favourites then press 3 Perform the desired operation as shown in the following table or displayed on the Screen This function may not be available in some countries regions To Do this Create your Favourite list for the first time 1 Press to select Yes 2 Press yellow key to select favourite list 3 Press 4 7 to select the channel you want to add then press Q Channels that are stored in the Favourite list are indicated by a amp symbol Watch a channel 1 Press yellow key to navigate through favourite lists 2 Press 4 7 to select the channel then press Turn off the Favourite list Press RETURN Add or remove channels in the currently edited Favourite list 1 Press the blue button 2 Press the yellow button to choose the list you want to edit 3 Press 4 7 to
28. h could result in a fire Notes Do not use the supplied mains lead on any other equipment Do not pinch bend or twist the mains lead excessively The core conductors may be exposed or broken Do not modify the mains lead Do not put anything heavy on the mains lead Do not pull on the mains lead itself when disconnecting the mains lead Do not connect too many appliances to the same mains socket Do not use a poor fitting mains socket Prohibited Usage Do not install use the TV set in locations environments or situations such as those listed below or the TV set may malfunction and cause a fire electrical shock damage and or injuries Location Outdoors in direct sunlight at the seashore on a ship or other vessel inside a vehicle in medical institutions unstable locations near water rain moisture or smoke Environment Places that are hot humid or excessively dusty where insects may enter where it might be exposed to mechanical vibration near flammable objects candles etc The TV set shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the TV Situation Do not use when your hands are wet with the cabinet removed or with attachments not recommended by the manufacturer Disconnect the TV set from mains socket and aerial during lightning storms Broken pieces Donotthrow anything at the TV set The screen glass may
29. http www sony net KDL 40P30xx KDL 37P30xx KDL 32P30xx KDL 26P30xx KDL 26S30xx KDL 26S28xx Printed in EU KDL 40U30xx KDL 37U30xx KDL 32U30xx KDL 26U30xx KDL 26T28xx KDL 26T26xx 3273 47512 3 273 475 12 1 KDL 40P30xx KDL 37P30xx KDL 32P30xx KDL 26P30xx KDL 26S30xx KDL 26S28xx BRAVIA 2008 Sony Corporation wu 3 273 475 12 1 U L CD Digital Colour TV Operating Instructions A Before operating the TV please read the Safety information section of this manual Retain this manual for future reference KDL 40U30xx KDL 37U30xx KDL 32U30xx KDL 26U30xx KDL 26T28xx KDL 26T26xx For useful information about Sony products http www sony europe com myproduct NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience Should the fuse in the plug supplied need to be replaced a 10 AMP fuse approved by ASTA or BSI to BS 1362 i e marked with amp or Y must be used When an alternative type of plug is used it should be fitted with a 10 AMP FUSE otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board Ifthe plug supplied with this equipment has a detachable fuse cover be sure to attach the fuse cover after you change the fuse Never use the plug without the fuse cover If you should lose the fuse cover please contact you
30. ke out the stand Remote RM ED009 1 Size AA batteries R6 type 2 Stand 1 Screws for stand 3 Screws for stand 4 KDL 40P30xx KDL 37P30xx KDL 40U30xx KDL 37U30xx Stand To insert batteries into the remote Push and lift the cover to open Observe the correct polarity when inserting batteries Do not use different types of batteries together or mix old and new batteries Dispose of batteries in an environmentally friendly way 2 Release the protection bag and take out Certain regions may regulate disposal of batteries Please the TV set consult your local authority Handle the remote with care Do not drop or step on it or spill liquid of any kind onto it Do not place the remote in a location near a heat source a place subject to direct sunlight or a damp room 3 Place the TV set on the stand Take care not to interfere with cables 3 Connecting an aerial VCR DVD recorder Connecting an aerial only aping dn uejs fh Coaxial cable 4 Take out the screws from the accessory KDL 32P30xx KDL 26P30xx KDL 32U30xx KDL 26U30xx KDL 26S30xx KDL 26S28xx KDL 26T28xx KDL 26T26xx KDL 40P30xx KDL 37P30xx KDL 40U30xx KDL 37U30xx Coaxial cable D Fix the TV to the stand using the supplied screws KDL 32P30xx KDL 26P30xx KDL 32U30xx KDL 26U30xx KDL 40P30xx KDL 26S30xx KDL 37P30xx KDL 26S28xx KDL 40U30xx KDL 26T28xx KDL 37U3
31. ns to enter your existing PIN code 2 Press the number buttons to enter the new PIN code 3 Press RETURN PIN code 9999 is always accepted Technical Set up Auto Service Update Enables the TV to detect and store new digital services as they become available Software Download Enables the TV to automatically receive software updates free through your existing aerial when issued Sony recommends that this option is set to atall times If you do not want your software to be updated set this option to Off System Information Displays the current software version and the signal level Time Zone Allows you to manually select the time zone you are in if it is not the same as the default time zone setting for your country region Auto DST Sets whether or not to automatically switch between summer time and winter time On Automatically switches between summer time and winter time according to the calendar Off The time is displayed according to the time difference set by Time Zone CA Module Set up Allows you to access a pay TV service once you obtain a Conditional Access Module CAM and a view card See page 17 for the location of the 1 PCMCIA socket 31 NNJW Additional Information Specifications Display Unit Power Requirements 220 240 V AC 50 Hz Screen Size KDL 40xxxxx 40 inches KDL 37xxxxx 37 inches KDL 32xxxxx 32 inch
32. nt connected to the audio output sockets When connected with an HDMI control compatible equipment you can turn the connected equipment on interlocked with the TV This setting must be made after connecting the equipment Sound Effect Treble Bass Balance and Auto Volume are not available when Speaker is set to Audio System 24 Features menu You can select the options listed below on the Features menu To select options in Settings see Navigating through menus page 20 Screen Changes the screen format Auto Format Automatically changes the screen format according to the broadcast signal Screen Format For details about the screen format see page 13 V Size Adjust the vertical size of the picture when Screen Format is set to Smart Even if you have selected or Off in Auto Format you can always modify the format of the screen by pressing amp f repeatedly Auto Format is available for PAL and SECAM signals only Power Savi ng Selects the power saving mode to reduce the power consumption of the TV Standard Default settings Reduce Reduces the power consumption of the TV Picture Off Switches off the picture You can listen to the sound with the picture off ANNIN USN AV2 Outp ut Sets a signal to be output through the socket labelled lt 2 on the rear of the TV If you conn
33. ode it will automatically turn itself on when the programme is about to start 14 Do this Set the time and date of a programme 1 Press 4 7 Xulc to select the future programme you want to you want to record record then press 9 0 Manual timer REC 2 Press 4 7 to select Manual timer REC then press 3 Press 4 37 to select the date then press gt 4 Set the start and stop time in the same way as in step 5 Press 4 7 to select the programme then press 6 Press to set the TV and your VCR timers A red symbol appears by that programme s information The B indicator on the TV front panel lights up in orange z T To record programme you are currently watching press 9 0 e Cancel a recording reminder 1 Press 69 0 Timer list 2 Press 4 7 to select Timer list then press 3 Press 4 7 to select the programme you want to cancel then press 4 Press 4 7 to select Cancel Timer then press A display appears to confirm that you want to cancel the programme 5 Press n c to select Yes then press C to confirm Youcan set VCR timer recording on the TV only for SmartLink compatible VCRs If your VCR is not SmartLink compatible a message will be displayed to remind you to set your VCR timer Once a recording has begun you can switch the TV to standby mode but do not turn off the TV completely or the recording may be cancelled fan a
34. on EET 8 9 Overview OF the remole IWE 10 Overview of the TV buttons and indicators 11 Watching TV rie 12 Checking the Digital Electronic Programme Guide EPG DM3 eese 14 Using the Digital Favourite list ient patei c dis c ieu IU RU ia 16 Using Optional Equipment Connecting optional equipment enne nenne nnne nnne nennen 17 Viewing pictures from connected equipment ssssesseenenm eene 18 Using AN MOU 19 Using MENU Functions Navigating through wawi uanza wa nisawa KABAKA NA KANU nennen nnne 20 Picture Adjustment men cec reete tote eet erre eb 21 Sound Adjustment AA iii neg D Pul REA XE RARE AER EROR dead 23 e p 25 Set UP MEN eeSa 27 Digital Set up menu 3 sirere 30 Additional Information Specification m 32 Troubleshooting p aa 34 for digital channels only Start up Guide 1 Checking the 2 Attaching the stand accessori es 1 Open the carton box and ta
35. ored on the TV 1 Press 4 7 to select the channel you want to remove or move to a new position Press the number buttons to enter the known three digit programme number of the broadcast you want 2 Remove or change the order of the digital channels as follows To remove the digital channel Press After a confirmation message appears press lt to select Yes then press C To change the order of the digital channels Press gt then press 44 to select the new position for the channel and press 3 Press RETURN Digital Manual Tuning Tunes the digital channels manually 1 Press the number button to select the channel number you want to manually tune then press 4 to tune the channel 2 When the available channels are found press V to select the channel you want to store then press C 3 Press 4 7 to select the programme number where you want to store the new channel then press C Repeat the above procedure to manually tune other channels 30 GB Digital Set up Subtitle Set up Subtitle Setting When For Hard Of Hearing is selected some visual aids may also be displayed with the subtitles if TV channels broadcast such information Subtitle Language Selects which language subtitles are displayed in Audio Set up Audio Type Switches to broadcast for the hearing impaired when For Hard Of Hearing is selected Audio Language Selects the language used for a programme
36. ou live Although this TV set follows DVB T specifications compatibility with future DVB T digital terrestrial broadcasts cannot be guaranteed Some Digital TV functions may not be available in some countries The manufacturer of this product is Sony Corporation 1 7 1 Konan Minato ku Tokyo 108 0075 Japan The Authorized Representative for EMC and product safety is Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents Trademark information DV is a registered trademark of the DVB Project Manufactured under license from BBE Sound Inc Licensed by BBE Sound Inc under one or more of the following US patents 5510752 5736897 BBE and BBE symbol are registered trademarks of BBE Sound Inc Manufactured under license from Dolby Laboratories Dolby and the double D symbol DO are trademarks of Dolby Laboratories HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HD3D Sound BBE HOM HIGH DEFINITION MULTIMEDIA INTERFACE OO posy VIRTUAL SURROUND The illustrations used in this manual are of the KDL 26S28xx unless otherwise state The xx that appears on the model name corresponds to two numeric digits related to colour variation Table of Contents Start up Guide Safety informati
37. r nearest Sony service station How to replace the fuse Open the fuse compartment with a blade screwdriver and replace the fuse Introduction Thank you for choosing this Sony product Before operating the TV please read this manual thoroughly and retain it for future reference Disposal of the TV set Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local Civic Office your household waste disposal service or the shop where you purchased the product 208 Notice for Digital TV function Any functions related to Digital TV DM3 will only work in countries or areas where DVB T MPEG2 digital terrestrial signals are broadcasted Please confirm with your local dealer if you can receive a DVB T signal where y
38. rts and electronic games Dolby Virtual Uses the TV speakers to simulate the surround effect produced by a multi channel system Off Flat response Also allows you to store your preferred settings Ifyou set Volume to On Dolby Virtual changes to Standard If headphones are connected Sound Effect changes to Off Treble Adjusts higher pitched sounds ANNIN USN Adjusts lower pitched sounds Balance Emphasizes left or right speaker balance Reset Resets all the sound settings to the factory settings Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast Stereo Mono For a stereo broadcast A B Mono For a bilingual broadcast select A for sound channel 1 for sound channel 2 or Mono for a mono channel if available If you select other equipment connected to the TV set Dual Sound to Stereo or Auto Volume Keeps a constant volume level even when volume level gaps occur e g adverts tend to be louder than programmes Continued 23 GB Speaker Turns on off the TV s internal speakers Speaker The TV speakers are turned on in order to listen to the TV s sound through the TV speakers Audio System The TV speakers are turned off in order to listen to the TV s sound only through your external audio equipme
39. s shown in the following table or displayed on the screen Digital Electronic Programme Guide EPG This function may not be available in some countries regions To Do this Watch a programme Press 4 7 lt 8 5 to select the programme then press Turn off the EPG Press Sort the programme information by category Category list 1 Press the blue button 2 Press 4 lt gt to select a category then press The categories available include Categories Contains all available channels Category name e g News Contains all channels corresponding to the selected category Set a programme to be recorded Timer REC 1 Press 4 3 lt 5 8 gt to select the future programme you want to record then press 9 0 2 Press 4 to select Timer REC 3 Press to set the TV and your VCR timers A red symbol appears by that programme s information The B indicator on the TV front panel lights up in orange To record the programme you are currently watching press 9 0 Set a programme to be displayed automatically on the screen when it starts Reminder 1 Press 4 3 amp ulc to select the future programme you want to display then press 2 Press 4 7 to select Reminder then press A symbol appears by that programme s information The GB indicator on the TV front panel lights up in orange If you switch the TV to standby m
40. se Closes the Tools menu Picture Mode except See page 21 PC input mode Display Mode in See page 21 input mode only Sound Effect See page 23 Speaker See page 24 PIP in PC input See page 19 mode only Centre in PC input See page 26 mode only V Lines in PC input See page 26 mode only Sleep Timer except See page 26 PC input mode Power Saving See page 25 To view two pictures simultaneously PIP Picture in Picture You can view two pictures PC input and TV programme on the screen simultaneously Connect a PC page 17 and make sure that images from a PC appear on the screen You cannot display resolutions higher than WXGA 1280 x 768 pixels 1 Press TOOLS to display the Tools menu 2 Press 4 Y to select PIP then press The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner You can use 4 9 lt to move the TV programme screen position 3 Press number buttons or PROG to select the TV channel To return to single picture mode Press RETURN You can switch the audible picture by selecting PC Sound TV Sound from the Tools menu Using HDMI control The HDMI control function allows equipment to control each other using HDMI CEC Consumer Electronics Control specified by HDMI You can perform interlocked control operations between Sony HDMI control compatible
41. select one of the following TV broadcast systems then press n B G For western European countries regions D K For eastern European countries regions L For France I For the United Kingdom n Depending on the country region selected for Country page 6 this option may not be available Channel 1 Press 4 7 to select Channel then press 2 Press 4 7 to select S for cable channels or for terrestrial channels then press gt 3 Tune the channels as follows If you do not know the channel number frequency Press 4 to search for the next available channel When a channel has been found the search will stop To continue searching press 4 7 If you know the channel number frequency Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number 4 Press to jump to Confirm then press Repeat the procedure above to preset other channels manually Label Assigns a name of your choice up to five letters or numbers to the selected channel AFT Allows you to fine tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality 2898 Audio Filter Improves the sound for individual channels in the case of distortion in mono broadcasts Sometimes a non standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes If you do not experience any
42. select the channel you want to add or remove then press Remove all channels from the current Favourite list 1 Press the blue button 2 Press the yellow button to select the favourite list you want to edit 3 Press the blue button 4 Press lt gt to select Yes then press C to confirm 16 Using Optional Equipment Connecting optional equipment You can connect a wide range of optional equipment to your TV Connecting cables are not supplied PC Hi Fi audio equipment DVD player with e component By output Video game equipment DVD player Decoder Audio system DVD player PC HDMI output Blu ray disc player Digital video camera DVD recorder VCR Decoder J CAM card For service use only SS 556 1 S VHS Hi8 1 DVC camcorder R i G amm Headphones 17 jueuidinb3 jeuondg j Viewing pictures from connected equipment Switch on the connected equipment then perform one of the following operation For equipment connected to the scart sockets using a fully wired 21 pin scart lead Start playback on the connected equipment The picture from the connected equipment appears on the screen For an auto tuned VCR page 7 In analogue mode press PROG or the number buttons to select the
43. sound distortion we recommend that you leave this option set to the factory setting Off n You cannot receive stereo or dual sound when Low or High is selected Audio Filter is not available when System is set to L Skip Skips unused analogue channels when you press PROG to select channels You can still select a skipped channel using the number buttons Decoder Views and records the scrambled channel selected when using a decoder connected directly to scart connector c 1 or to scart connector amp 2 via a VCR n Depending on the country region selected for Country page 6 this option may not be available Confirm Saves changes made to the Manual Programme Preset settings 2998 NNJW i Digital Set up menu Dv3 You can select the options listed below on the Digital Set up menu To select options in Settings refer to Navigating through menus page 20 f Some functions may not be available in some countries regions Digital Tuning Digital Auto Tuning Tunes in the available digital channels This option allows you to retune the TV after moving house or to search for new channels that have been launched by broadcasters For details see Auto tunning the TV on page 7 Programme List Edit Removes any unwanted digital channels stored on the TV and changes the order of the digital channels st
44. t LCD Screen Although the LCD screen is made with high precision technology and 99 99 or more of the pixels are effective black dots may appear or bright points of light red blue or green may appear constantly on the LCD screen This is a structural property of the LCD screen and is not a malfunction Do not push or scratch the front filter or place objects on top of this TV set The image may be uneven or the LCD screen may be damaged Ifthis TV set is used in a cold place a smear may occur in the picture or the picture may become dark This does not indicate a failure These phenomena disappear as the temperature rises Ghosting may occur when still pictures are displayed continuously It may disappear after a few moments The screen and cabinet get warm when this TV set is in use This is not a malfunction The LCD screen contains a small amount of liquid crystal and mercury The fluorescent tubes used in this TV set also contain mercury Follow your local ordinances and regulations for disposal Handling and cleaning the screen surface cabinet of the TV set Be sure to unplug the mains lead connected to the TV set from mains socket before cleaning To avoid material degradation or screen coating degradation observe the following precautions To remove dust from the screen surface cabinet wipe gently with a soft cloth If dust is persistent wipe with a soft cloth slightly moistened with a diluted mild
45. unt how many 0 standby indicator flashes between each two second break For example the indicator flashes three times then there is a two second break followed by another three flashes etc 2 Press Don the top edge of the TV to turn it off disconnect the mains lead and inform your dealer or Sony service centre of how the indicator flashes number of flashes When it is not flashing 1 Check the items in the tables below 2 If the problem still persists have your TV serviced by qualified service personnel Picture No picture screen is dark and no sound Check the aerial connection Connect the TV to the mains and press D on the top edge of the TV If the 5 standby indicator lights up in red press I 5 No picture or no menu information from equipment connected to the scart connector Press amp J 3 to display the connected equipment list then select the desired input Checkthe connection between the optional equipment and the TV Double images or ghosting Check the aerial connection Check the aerial location and direction Only snow and noise appear on the screen Check if the aerial is broken or bent Check if the aerial has reached the end of its serviceable life three to five years in normal use one to two years at the seaside Distorted picture dotted lines or stripes Keep the TV away from electrical noise sources such as cars motorcycles hair dryers or optical
46. video channel For other connected equipment Press amp amp to display the connected equipment list Press 4 to select the desired input source then press The highlighted item is selected if 2 seconds pass without any operation after pressing 4 When the input source is set to Skip in the AV Preset menu under the Set up menu page 27 that input does not appear in the list Symbol on the screen Description S AVI AVI see the equipment connected to n S AV2 AV2 see the equipment connected to SmartLink is a direct link between the TV and a VCR DVD recorder amp To see the equipment connected to 8 HDMI IN 4 To see the equipment connected to B If the equipment has a DVI socket connect the DVI socket to the HDMI IN socket through a DVI HDMI adaptor interface not supplied and connect the equipment s audio out sockets to the audio in HDMI IN sockets lt gt AV4 HDMI IN 5 To see the equipment connected to Ej 3 AVS Besureto use only an HDMI cable that bears the HDMI logo When HDMI control compatible equipment is connected communication with the connected equipment is supported Refer to page 19 to set up this communication 189 Symbol on the Description screen S or To see the equipment connected to R amp AV6 To avoid picture noise do not connect the
Download Pdf Manuals
Related Search