Home

Samsung SRD-450 DVR User Manual

1. 1 Press the lt gt button on the launcher menu or press the POWER button on the remote control 2 Press the lt LOG OFF gt button It automatically logs off POWER OFF You can shut down the system only if you have logged in to the DVR 1 Press the lt gt button on the launcher menu or press the POWER button on the remote control 2 Press the lt POWER OFF gt button 3 Enter the password and press the lt ENTER gt button 4 Turn off the power switch 18_ getting started IVe LIVE SCREEN CONFIGURATION Icons on the Live Screen Name 14 Camera Name e DISP REC ES ow Description Displays the name of the camera 2 Recording Modes G Indicates continuous recording A Indicates alarm recording M Indicates motion detection recording Indicates instant recording 3 Launcher Menu Displays the current time menu and status English _19 AAI IVe VIEW THE LAUNCHER MENU You can use the Launcher menu appearing on the bottom of the live screen to access it 1 On the Live screen move the cursor or press the MENU button on the remote control to display the Launcher menu 2 Use the direction buttons or the cursor to select a desired menu IZ You can adjust the display time of the Launcher in DISPLAY gt OSD gt STATUS BAR TIMEOUT Page 30 2010 01 01 14 30 41
2. MENU BACKUP SEARCH DISP Name Description 14 Logout Power off The logout or power off dialog appears 2 Date Time Displays the current time 3 MENU Displays the system record setup menu window appears 4 BACKUP Accesses the backup screen 5 SEARCH Accesses the search screen 6 DISP Displays a dialog to switch between split mode and sequence REC Starts the manual recording Network Status Indicates the Web Viewer connection status 9 HDD Displays HDD mode whether it is overwrite or not 20_ live DISPLAY You can select a screen split mode or perform the auto sequence function Switching the screen mode You select a screen mode from single and 4 split 1 Press the lt DISP gt button from the Launcher menu 2 Select a split mode in the split option menu Press the MODE button on the front panel or the remote control to switch the mode in the sequence of the launcher menu items AAI Auto Sequence You can perform the auto sequence function 1 Press the lt DISP gt button from the Launcher menu or press the MODE on the remote control 2 When the split mode selection menu appears press the lt E gt button The screen mode switches to Single while transition IZ You can adjust the screen transition interval in SYSTEM SETUP gt DISPLAY gt MONITOR gt SEQUENCE DWELL Page 31 You can also add a sequence
3. All Number of copies fi Pages from fi to fi C Selection nee nee Cancel English _57 wep viewer Screen Capture 1 Click lt gt 2 The current screen of the selected channel will be saved in the default saving path of the PC K Click lt ActiveX Setting gt to display the Settings menu where you can change the default path ActiveX Setting 1 Click lt f gt Setting 2 When the Setting window appears specify lt Render gt and Render lt Path gt for the video or the screen to capture DirectDraw 3 To change the saving path click lt Save Folder _ gt and C GDI specify a new path Save Folder 4 n Windows Vista you can not change the file path c WsaveFolder 4 Click lt Save gt Your changes will be saved To view the status Click the lt Status gt tab on the bottom You can check the event occurrence status on each channel of the connected DVR To view the log Click the lt Log gt tab on the bottom You can check the log of the connected DVR 58_ web viewer SEARCH VIEWER Click the lt Search gt tab to display the remote play screen of the DVR Search Viewer At a Glance dAMGIA GAM Bitku ee a e 9 i t 1 u 4 1 T 18 tt a H n E Name Description il Selection Consists of 4 tabs lt Live gt lt Search gt lt Setup gt and lt Information gt Search Screen Displays
4. is any express agreement or commitment however denominated not to enforce a patent Such as an express permission to practice a patent or covenant not to sue for patent infringement To grant such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party If you convey a covered work Knowingly relying on a patent license and the Corresponding Source of the work is not available for anyone to copy free of charge and under the terms of this License through a publicly available network server or other readily accessible means then you must either 1 cause the Corresponding Source to be so available or 2 arrange to deprive yourself of the benefit of the patent license for this particular work or 8 arrange in a manner consistent with the requirements of this License to extend the patent license to downstream recipients Knowingly relying means you have actual knowledge that but for the patent license your conveying the covered work in a country or your recipient s use of the covered work in a country would infringe one or more identifiable patents in that country that you have reason to believe are valid If pursuant to or in connection with a single transaction or arrangement you convey or propagate by procuring conveyance of a covered work and grant a patent license to some of the parties receiving the covered work authorizing them to use propagate
5. SAMSUNG TECHWIN 4 CHANNEL DVR User Manual ROA overview FEATURES This product enables you to record 4 channels of camera image and voice source simultaneously This feature provides an excellent picture quality for both real time monitoring and search e You can also monitor remote videos or search for your previous recordings and change the menu settings of the DVR via the network e As this product can bypass the Windows operating system to implement the DVR specific operating system on its hardware components the overall operation is stable e This product compresses the 4 channels of camera input into a format of H 264 before converting analog to digital video which enables you to make an effective use of your hard disk e You can use the remote control mouse search buttons on the front panel or a combination of them to perform freeze fast playback backward playback as well as monitoring an event of detection such as time motion and alarm e t provides various recording modes including continuous motion and alarm recordings e Supports DDNS use dynamic IP as like static IP e USB Back Up e Separate resolution settings for each channel e Separate motion area settings for each channel e Supports a triplex tasking of Save and Remote View during a search e Motion Detection Recording e Prevents unauthorized user control and data loss using the password system e Supports operations of the remote con
6. work that uses the Library as object code and or source code so that the user can modify the Library and then relink to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions b Use a suitable shared library mechanism for linking with the Library A suitable mechanism is one that 1 uses at run time a copy of the library already present on the user s computer system rather than copying library functions into the executable and 2 will operate properly with a modified version of the library if the user installs one as long as the modified version is interface compatible with the version that the work was made with c Accompany the work with a written offer valid for at least three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution d If distribution of the work is made by offering access to copy from a designated place offer equivalent access to copy the above specified materials from the same place e Verify that the user has already received a copy of these materials or that you have already sent this user a COPY For an executable the required form of the work that uses the Library must include any data and utility programs ne
7. 50_ backup search amp olay You can perform the search for recorded data by the time or by the search criteria Such as an event SEARCH 1 2 Select a user account and enter the password SEARCH BY TIME Press the SEARCH button on the remote control or press the lt SEARCHS gt button on the launcher menu The login dialog appears Only those users who have the search permission can access the SEARCH menu AV 1d 8 HOUVAS You can schedule to search for recording data at a desired time Using the mouse may help easy setup 1 Playback 1 2 Press the lt PLAY gt button on the bottom 3 The data item will be played Use the direction buttons to move to the search date and Access the SEARCH menu to display the lt SEARCH BY TIME gt screen If any recording data is found for the search date the recording portion in the time bar of each channel on that specific time will be highlighted blue press the ENTER button The date with a recording schedule will be marked in orange on the left calendar of the search bar gis Select a data item to play Use the lower play bar to adjust the speed or switch the play mode E3 It will turn orange when you place the cursor over it Each time you right click it the screen mode will switch to 1 gt 4 split mode in sequence Click it to return to the Single mode and click it again to move to the ne
8. 6 Install it in a place with good ventilation 7 Avoid aiming the camera directly towards extremely bright objects such as sun as this may damage the CCD image sensor 8 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus 9 The Mains plug is used as a disconnect device and shall stay readily operable at any time 10 When using the camera outdoors moisture may occur inside the camera due to temperature difference between indoors and outdoors For this reason it is recommended to install the camera indoors For outdoor use use the camera with built in fan and heater CAUTION 1 Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions 2 LAN Ethernet cable should not be extended to outside of building English _5 NMAIAGdSAO overview BEFORE START This user s manual provides Information for using DVR such as brief introduction part names functions connection to other equipment menu setup and the like You have to keep in mind the following notices e SAMSUNG retains the copyright on this manual e This manual cannot be copied without SAMSUNG s prior written approval e We are not liable for any or all losses to the product incurred by your use of non standard product or violation of instructions mentioned in this manual e f you want to open the case of your
9. 64 web viewer Instant Recording Setting 1 From the left menu tree select lt Record gt 2 Click lt Instant gt 3 Make your changes as necessary in details For more information refer to INSTANT RECORDING Page 48 4 Click lt Ok gt Your changes will be saved User Management Setting 1 From the left menu tree select lt User gt dAMGIA dAM 2 Click lt Management gt 3 Make your changes as necessary in details For more information refer to USER MANAGEMENT Page 34 4 Click lt Ok gt Your changes will be saved User Authority Setting 1 From the left menu tree select lt User gt 2 Click lt Authority gt 3 Make your changes as necessary in details For more information refer to USER AUTHORITY Page 35 4 Click lt Ok gt Your changes will be saved English _65 wep viewer IP Setup Setting 1 From the left menu tree select lt Network gt 2 Click lt Network gt re Dee r 3 Check the network connection status and make your changes as necessary in details For more information refer to IP SETUP Page 36 4 Click lt Ok gt Your changes will be saved E mail Setting 1 From the left menu tree select lt Network gt 2 Click lt E mail gt 3 Make your changes as necessary in details For more information refer to E MAIL Page 38 4 Click lt Ok gt Your cha
10. Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will
11. English _33 dNLAS YAA LVR setup USER You can configure the settings of USER MANAGEMENT USER AUTHORITY and LOGOUT See the previous section to repeat steps 1 3 Page 23 USER MANAGEMENT Add a user account whose information you can edit later Using the mouse may help easy setup 1 Use the direction buttons to move to the upper lt USER gt icon and press the ENTER button The USER MANAGEMENT setup screen appears 2 Use the direction A V lt P buttons to move toadesired fem item and add delete or change the user account Bz user USER MANAGEMENT USER ID admin Fal USE R 2 i autHoriry To add a user account CANCEL APPLY CLOSE j 1 Press the lt ADD gt button on the bottom of the USER om MANAGEMENT menu screen Be user 2 Use the direction A Y lt gt buttons to move to a desired p MANAGEMENT item and press ENTER to select it 7 ee Provide necessary information for the user to add e USER ID Enter the user ID e PASSWORD Enter the password e GROUP Select a group where the user belongs from lt MANAGER gt and lt USER gt e E MAIL Enter the email address at which you will be notified that an event occurs MANAGER EJ E MAIL E MAIL NOTI OFF ery re CANCEL ADD APPLY CLOSE 4 e E MAIL NOTI You can select to receive the email notification whe
12. Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu English _29 LVR setup DISPLAY You can configure the settings of OSD MONITOR and SEQUENCE See the previous section to repeat steps 1 3 Page 23 OSD You can specify the color and language for the time title border and motion displayed on the screen Using the mouse may help easy setup 1 Use the direction buttons to move to the upper lt DISPLAY gt icon and press the ENTER button The OSD setup screen appears 2 Use direction buttons A lt 1 gt to move to a desired item and press the ENTER button to set the value e STATUS BAR TIMEOUT Specify the display time of the A a v j CAMERA TITLE av Launcher that appears on the screen Hil wonror RECORDING HODEIOON a 1 BORDER COLOR av e CAMERA TITLE Set to display the camera name on the MOTION SENSOR DISPLAY Ee screen CAMS FANGURGE ENGLISH P e RECORDING MODE ICON Set to display the recording mode icon on the screen BORDER Set to display the inter channel borders ina um split mode e BORDER COLOR Select a color for the border e MOTION SENSOR DISPLAY Set to display the motion event in the motion sensor area when it occurs e MOTION COLOR Select a color of a detected motion that is displayed on the screen e LANGUAGE Select a menu language 3 When your sett
13. an interactive mode Gnomovision version 69 Copyright C year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker signature of Ty Coon 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Lesser General Public License instead of this License GNU GENERAL PUBLIC LICENSE Version 3 29 June 2007 Copyright 2007 Free Software Foundation Inc lt http tsf org gt Everyone is permitt
14. away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of It in new free programs and that you Know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We
15. whether gratis or for a fee you must pass on to the recipients the same freedoms that you received You must make sure that they too receive or can get the source code And you must show them these terms so they Know their rights Developers that use the GNU GPL protect your rights with two steps 1 assert copyright on the software and 2 offer you this License giving you legal permission to copy distribute and or modify it For the developers and authors protection the GPL clearly explains that there is no warranty for this free software For both users and authors sake the GPL requires that modified versions be marked as changed so that their problems will not be attributed erroneously to authors of previous versions Some devices are designed to deny users access to install or run modified versions of the software inside them although the manufacturer can do so This is fundamentally incompatible with the aim of protecting users freedom to change the software The systematic pattern of such abuse occurs in the area of products for individuals to use which is precisely where it is most unacceptable Therefore we have designed this version of the GPL to prohibit the practice for those products If such problems arise substantially in other domains we stand ready to extend this provision to those domains in future versions of the GPL as needed to protect the freedom of users Finally every program is threat
16. 1 68 0 1 i IP ADDRESS 192 168 0 200 2 First check the local connection properties from the e a Network Connection on the local PC ae Ex P 192 1 68 0 200 DDNS HOST NAME http ff00378 websamsung net 8080 MAX TX SPEED 8192 KBYTE PMA Subnet mask 255 255 255 0 Gateway 192 168 0 1 3 Provide the IP router address to display the login dialog where you enter the router ID and password 4 Access the DHCP setup menu to switch the router mode to DHCP server mode and provide the start address and the end one Enter the start 192 168 0 100 and the end 192 168 0 200 addresses IZ The addresses mentioned above may differ depending on the router so refer to the router manual for more information English _39 LVF setup DVR Connection 1 Use the direction buttons to move to the upper lt NETWORKSs icon in the SYSTEM SETUP menu screen and press the ENTER button The IP SETUP screen appears 2 Deselect the lt DHCP gt checkbox 3 Locate the local PC in connection with the same router and check information of gateway subnet mask 1st DNS and 2nd DNS server 4 Provide the IP address gateway subnet mask 1st DNS 2nd DNS server as appropriate IZ f the DHCP server has the start address 192 168 0 100 and the end one 192 168 0 200 specified change each of them to one between 192 168 0 2 192 168 0 99 and 192 168 0 201 192 168 0 254 Router Port Forwarding
17. 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the P
18. 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit htto www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This
19. CAMERA 3 Use the remote control or the cursor to select a desired a character Ov ae You can enter up to 8 bytes CAMS pin CANCEL APPLY CLOSE j Using the Virtual Keyboard To enter alohanumeric characters for the ID password and camera name you can use the cursor or the remote control 1 Use the direction buttons on the remote control to VIRTUAL KEYBOARD move to a desired item and press the ENTER button Or simply double click a desired item Use the direction button to move to a desired character and press the ENTER button or simply click the character Selecting lt gt will switch the selected character to the lower case Selecting lt BJ gt will erase the previous character ENTER CANCEL When done press the lt ENTER gt button on the bottom English _27 dNLAS YAA LVR setup Covert 1 Select a camera channel to covert 2 Use the up down A Y buttons in the right corner to select either lt ON gt or lt OFF gt and press the ENTER button f set to lt ON gt no information of the corresponding channel will be displayed However it continues recording f set to lt OFF gt video input from the corresponding camera will be displayed Audio Connection 1 Select a camera channel to connect to the audio source 2 Select an audio input port 3 When your settings are completed press lt APPLY gt button on the bottom Your settings will be ap
20. Click the lt Information gt tab to display the DVR model name and the version of the Web Viewer English _67 web viewer USING THE iPhone 1 Select the Safari browser 2 Enter the IP address or URL to connect And touch the lt Go gt button Cancel http set IP Address Port No Default 8080 n Ex http fO5bb96 websamsung net 8080 3 Enter the User name and Password then user can see the Image Default ID admin PW 4321 Cancel Secure Website Log In 4 Touch lt Refresh gt button to get the image CH select Frame Rate Manual Max 2 1 0 5 0 3 0 1 In choosing Manual it updates picture DVR Information 68_ web viewer aoo0endkx PRODUCT SPECIFICATION Item Details system Format NTSC PAL General Remote Control Yes Operation System Embedded Linux Input ACH BNC Video 1EA Output BNC 1 CH CVBS l Input 4CH 1Vp p Audio Output RCA Type 1CH Live Display Mode 1 4 Sequence Input ACH Output Relay 1CH Pre Alarm 1sec osec Alarm Motion Post Alarm select between 5 sec to 180 sec Buzzer Yes Motion Detection ACH Video Pop up support Video Codec H 264 Base profile Audio Codec G 11 64kbps NTSC 120ips 352x240 60ips 704 240 30ips 704 x 480 Video REC PB Speed PAL 100ips 352x288 50ips 704x288 25ips 704x576 Rec Quality Level Highest High Standard Low Performance Pentaplex Live Playback Recording Network Smart Phone o
21. ES system DATE TIME FIRMWARE UPDATE INFO Fos ag SYSTEM CURRENT VERSION SRD 450_V0 10_XXXXXX SYSTEM ID MANAGEMENT R NEW VERSION 0 0 0 0 NETWO REMOTE CONTROLLER CHECK DOWNLOAD REMOTE CONTROLLER Using the mouse may help easy setup 1 Use the direction buttons to move to lt REMOTE CONTROLLER gt in the left corner of the SYSTEM setup EY system menu and press the ENTER button 2 Use direction buttons A lt 1 gt to move to a desired mE ee item and set the lt REMOTE CONTROLLER ID gt CONTROLLER 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied CANCEL APPLY CLOSE j 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu 26_ DVR setup CAMERA You can configure the settings of each connected CAMERA COLOR and MOTION SENSOR CAMERA You can configure the camera settings of TITLE COVERT and AUDIO to your preference Using the mouse may help easy setup 1 Use the direction buttons to move to the upper on c ene i i a eer Baia hae ivi Ee U O a lt CAMERA icon and press the ENTER button The CAMERA setup screen appears CAMS CAMERA To change the camera title 2 Select an item in the title column The virtual keyboard appears
22. PAL ENGLISH FRAN AIS DEUTSCH ESPANOL ITALIANO TURK PYCCKU SVENSKA CESKY e E MAIL JPEG Alarm Motion Video Loss Mouse support USB Front Key support Remote Control support Weight 1 85Kg Dimensions W X H X D 290 X 60 X 224 3 mm Operating Temperature 0 C 40 C 82 F 104 F Operating Humidity 20 90 Input Voltage 100 240VAC 50 60Hz Power Consumption 17W OPEN SOURCE LICENSE REPORT ON THE PRODUCT The software included in this product contains copyrighted software that is licensed under the GPL LGPL You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to helo cctv samsung com If you want to obtain the complete Corresponding Source code in the physical medium such as CD ROM the cost of physically performing source distribution might be charged e GPL Software linux kernel Sysvinit dosfstoOls wget msmtp busybox cdrtools dvd rw tools iconv smartctl Uboot minicom openssl bash Im_sensors e LGPL Software glibc vmstat inetutils e OpenSSL License OpenSSL GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take
23. System Management Setting Sabin Mame S STeM O Passeord On Auto L g On Guration English _63 dAMGIA gJM wep viewer Control Device Setting 1 From the left menu tree select lt System gt 2 Click lt Remote Controller gt 3 Make your changes as necessary in details Recording Operation Setting 1 2 Click lt Operation gt Click lt Ok gt Cortral Bavied Setting Remote ontroser D DPA E ii o o at For more information refer to REMOTE CONTROLLER Page 26 Your changes will be saved From the left menu tree select lt Record gt Recording Operation Seating fuia Miadi p 3 Make your changes as necessary in details Post Evert Recording Time 434 Continuous Motion Recording Setting Click lt Ok gt For more information refer to RECORDING OPERATION Page 45 Your changes will be saved 1 From the left menu tree select lt Record gt 2 Click lt Continuous Motion gt 3 Make your changes as necessary in details Alarm Recording Setting 1 2 Click lt Alarm gt 3 Make your changes as necessary in details Click lt Ok gt Click lt Ok gt For more information refer to CONTINUOUS MOTION RECORDING Page 46 Your changes will be saved From the left menu tree select lt Record gt For more information refer to ALARM RECORDING Page 47 Your changes will be saved
24. To access the PC or DVR in the local LAN area of the router set the port forwarding for the router The DVR will use lt RTSP SERVICE PORT gt and lt WEB SERVER PORT for this purpose You must set the port forwarding for both ports IZ For more information refer to Network Setup Guide that comes with the DVR To check the connection status 1 Provide the IP address for the local PC or remote PC 2 When the login dialog appears and prompts you to enter the ID and password this means you have set the connection properly EVENT SENSOR You can configure the settings of HDD EVENT ALARM INPUT ALARM OUTPUT and BUZZER OUTPUT See the previous section to repeat steps 1 3 Page 23 HDD EVENT You can set to sound the alarm if the HDD has a problem or is full Using the mouse may help easy setup 1 Use the direction buttons to move to the upper lt EVENT SENSOR icon and press the ENTER button The HDD EVENT screen appears 40_ DVR setup 2 Use direction buttons A lt P to move to a desired g item and press the ENTER button to set the value EVENT SENSOR e SMART ALARM Specify the availability of the alarm N Tee if the HDD has a problem e DISK FULL EVENT Set to notify the user when the HDD is full 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display th
25. Using the mouse may help easy setup 1 Use the direction buttons to move to lt CONTINUOUS MOTION RECORDING in the left corner of the RECORD Zig RECORD setup screen and press the ENTER button SAR cw Use direction buttons A Y lt gt to move to a desired ee item and press the ENTER button to set the value a CAMS INSTANT RECORDING Qe ia fi CANCEL APPLY CLOSE A ann To specify the recording size FPS quality You can specify the recording size and the quality 1 The size adjustment window appears Use direction buttons A Y lt 1 gt to move to a desired MT Sorong From the lt TIME gt bar select a cell that you want to adjust the size ALARM item and press the ENTER button to set the value RecORONg c Se a m a e e CANCEL e SIZE Set the recording resolution e FPS Set the frame rate per second e QUALITY Set the recording quality CANCEL APPLY CLOSE Select one from LOW STANDARD HIGH HIGHEST The recordable time may differ depending on the recording quality e AUDIO Select whether to include audio input to the recording e Remaining Rate If you change the settings of the resolution and the remaining rate the frame rate available for each resolution will be recalculated ra i P
26. a desired tw item and press the ENTER button to set the value RECORDING The size adjustment window appears RECORDING e SIZE Set the recording resolution e FPS Set the frame rate per second e QUALITY Set the recording quality Select one from LOW STANDARD HIGH HIGHEST The recordable time may differ depending on the recording quality e AUDIO Select whether to include audio input to the recording e Remaining Rate If you change the settings of the resolution and the remaining rate the frame rate available for each resolution will be recalculated RECORDING button on the bottom vn Ria Your settings will be applied OT REN AUDI CH1 704x240 15 HIGHEST orr P ALARM CH2 704x2 15 HIGHEST orr P RECORDING CH3 704x2 15 HIGHEST orF E CH4 15 HIGHEST oF P INSTANT RECORDIN dialog and return to the previous menu a CANCEL 48 DVR setup a CANCEL APPLY CLOSE T OackUO You can check the backup data size and perform backup of a desired channel or at a desired time BACKUP 1 Press the MENU button on the remote control or select lt BACKUP gt button on the launcher menu The login dialog appears 2 Select a user account and enter the password Only those users who have the backup permission can access the BACKUP menu Web Viewer doesn t support data backup including the
27. as a whole that a is included in the normal form of packaging a Major Component but which is not part of that Major Component and b serves only to enable use of the work with that Major Component or to implement a Standard Interface for which an implementation is available to the public in source code form A Major Component in this context means a major essential component kernel window system and so on of the specific operating system if any on which the executable work runs or a compiler used to produce the work or an object code interpreter used to run it The Corresponding Source for a work in object code form means all the source code needed to generate install and for an executable work run the object code and to modify the work including scripts to control those activities However it does not include the work s System Libraries or general purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work For example Corresponding Source includes interface definition files associated with source files for the work and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require such as by intimate data communication or control flow between those subprograms and other parts of the work The Corresponding Source need not include anything that users can regenerate
28. automatically from other parts of the Corresponding Source The Corresponding Source for a work in source code form is that same work 2 Basic Permissions All rights granted under this License are granted for the term of copyright on the Program and are irrevocable provided the stated conditions are met This License explicitly affirms your unlimited permission to run the unmodified Program The output from running a covered work is covered by this License only if the output given its content constitutes a covered work This License acknowledges your rights of fair use or other equivalent as provided by copyright law You may make run and propagate covered works that you do not convey without conditions so long as your license otherwise remains in force You may convey covered works to others for the sole purpose of having them make modifications exclusively for you or provide you with facilities for running those works provided that you comply with the terms of this License in conveying all material for which you do not control copyright Those thus making or running the covered works for you must do so exclusively on your behalf under your direction and control on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you Conveying under any other circumstances is permitted solely under the conditions stated below Sublicensing is not allowed section 10 makes it unnec
29. automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of thi
30. gt 2 Click lt Color gt 3 Make your changes as necessary in details For more information refer to COLOR Page 28 4 Click lt Ok gt Your changes will be saved Motion setting You can specify the motion detection area and specify the use of the alarm output if a motion is detected If a detection area is specified the system will detect a motion in that area if it occurs 1 From the left menu tree select lt Camera gt 2 Click lt Motion gt 3 Click a motion area and drag it up to a desired point The selected cells will turn in a different color which will be specified as a detection area For more information refer to MOTION SENSOR Page 29 4 Click lt Ok gt Your changes will be saved OSD setting You can change the display information 1 From the left menu tree select lt Display gt 2 Click lt OSD gt co O io pe Status Bar Timeout 10 S mt 3 Make your changes as necessary in details agua r 1 1 u 3 Boii on i For more information refer to OSD Page 30 Borger Color Gray Fi Motion Sensor Display or 4 Click lt Ok gt Mation Color ue a Language Ei Your changes will be saved 62 web viewer Monitor setting You can adjust the position of the displayed items 1 From the left menu tree select lt Display gt 2 Click lt Monitor gt 3 Make your changes as necessary in de
31. harmful interference in which case the user will be required to correct the interference at his own expense NAIAdSAO Package Contents Please unwrap the product and place the product on a flat place or in the place to be installed Please check the following contents are included in addition to the main unit S cf User Manual Quick Guide CD D Remote Control Battery AAAx2 Adaptor Power Cable English _7 overview CONTENTS OVERVIEW CONNECTING WITH OTHER DEVICE GETTING STARTED LIVE DVR SETUP 8 overview 2 3 6 10 11 12 14 14 15 17 17 18 18 18 19 20 21 21 22 22 23 23 24 27 30 33 34 36 40 44 45 Features Important Safety Instructions Before Start Part Names and Functions Front Part Names and Functions Rear Remote Control Connecting the Audio Speaker Mouse and Power Cable Connecting the Alarm I O Network Connection Starting the System Log On Log In Log Off Power Off Live Screen Configuration View the Launcher Menu Display Record Playback Playback Screen Before Starting Setting Up System Setup System Camera Display Sound User Network Event Sensor Disk Management Record Setup BACKUP 49 Backup SEARCH amp PLAY 51 Search WEB VIEWER 53 Introduction 56 Live Viewer MJIAYJAO 59 Search Viewer 60 Search by Time 60 Search by Event 61 Setup 67 Information 68 Using the iPhon
32. in lt Period gt 3 Specify the display sequence of the items found e Nearest Displays the most recent event on the top e Farthest Displays the oldest event on the top 4 Click lt Search gt The event data will be listed in the lower pane 5 Double click a desired item 6 Use the play bar to adjust the play direction and speed as necessary For more information about the play bar refer to Playback Screen Page 22 60_ web viewer SETUP Click the lt Setup gt tab to display the DVR remote setup screen Setup Viewer At a Glance dAMGIA gdAM Name Description 1 peli SEBIET Consists of 4 tabs lt Live gt lt Search gt lt Setup gt and lt Information gt 2 Menu Tree Select a desired menu item 3 Details Detailed information of the selected menu item 4 Ok Cancel Saves or cancels your settings Camera Setting You can configure the settings of the camera that is connected to the DVR 1 From the left menu tree select lt Camera gt 2 Make your changes as necessary in details Camera Setting CH Camera Tile For more information refer to CAMERA Page 27 3 Click lt Ok gt Your changes will be saved t cama tan TAMA kapu English _61 web viewer Color setting You can adjust all settings from O to 100 for each channel in fine tune mode and the default is 50 1 From the left menu tree select lt Camera
33. modify or convey a specific copy of the covered work then the patent license you grant is automatically extended to all recipients of the covered work and works based on it A patent license is discriminatory if tt does not include within the scope of Its coverage prohibits the exercise of or is conditioned on the non exercise of one or more of the rights that are specifically granted under this License You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software under which you make payment to the third party based on the extent of your activity of conveying the work and under which the third party grants to any of the parties who would receive the covered work from you a discriminatory patent license a in connection with copies of the covered work conveyed by you or copies made from those copies or b primarily for and in connection with specific products or compilations that contain the covered work unless you entered into that arrangement or that patent license was granted prior to 28 March 2007 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law 12 No Surrender of Others Freedom If conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of thi
34. not be disposed of with other household waste at the end of their working life Where marked the chemical symbols Hg Cd or Pb indicate that the battery contains mercury cadmium or lead above the reference levels in EC Directive 2006 66 If batteries are not properly disposed of these substances can cause harm to human health or the environment To protect natural resources and to promote material reuse please separate batteries from other types of waste and recycle them through your local free battery return system 4 Channel DVR User Manual Copyright 2010 Samsung Techwin Co Ltd All rights reserved Trademark gf samsuna TecHwin is the registered logo of Samsung Techwin Co Ltd The name of this product is the registered trademark of Samsung Techwin Co Ltd Other trademarks mentioned in this manual are the registered trademark of their respective company Restriction Samsung Techwin Co Ltd shall reserve the copyright of this document Under no circumstances this document shall be reproduced distributed or changed partially or wholly without formal authorization of samsung Techwin Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document but no formal guarantee shall be provided Use of this document and the subsequent results shall be entirely on the user s own responsibility Samsung Techwin reserves the right to change the contents of this document
35. searching for V i Selects a menu item or applies your setting or playing recorded video FREEZE AUDIO ALARM REC aa Performs the recording SAMSUNG 12 overview Changing Remote Control ID In a multi DVR system using a single remote control you can control only the DVR that matches the ID that you have set using the ID button 1 Press the ID button to check the ID of each of REMOCON ID and SYSTEM ID The defaults are 00 for the System ID and 00 for the Remote ID respectively 2 To change the Remote ID of the IR REMOTE CONTROLLER press and hold the ID button while entering a desired combination of two digits from O00 to 99 3 To change the ID of the DVR refer to REMOTE CONTROLLER gt REMOTE CONTROLLER ID Page 26 4 Press the ID button of the IR REMOTE CONTROLLER to check the ID NMAIAGdSAO K f the system number defined in REMOTE CONTROLLER is different from the number specified using the remote control no other button than the ID buttons will operate English _13 connecting with_otner device CONNECTING THE AUDIO SPEAKER MOUSE AND POWER CABLE Jr B pI ue gt o lg oN s 4 Lee ra Rarer Meie e ea iC Z 2 oe Do CONNECTING THE ALARM I O Connecting the alarm Input signal Connection port for the alarm input sical xx Connect one strand of the sensor signal line two E e l fem strands to the alarm input port and connect th
36. set the auto logout when no input is made after you logged in e DURATION Specify the period for the auto logout When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu English _25 LVR setup To update the firmware 1 Connect the device storing the update files to the USB a port ES system 2 Press lt USB gt button in system management menu kiili NEO r i F aus td MANAGEMENT ana rN Fis aT Ewo 3 Select device you will see the firmware list i 4 Select update file in lt FIRMWARE LIST gt ont a 5 Press lt UPDATE gt button in the Firmware upgrade window 6 The update status bar appears and the system will own perform the upgrade EY system 7 When the upgrade is completed the system restarts a FIRMWARE UPDATE INFO pa SYSTEM SELECT DEVICE SYSTEM ID 0 MANAGEMENT R USB MEMORY NETWORK E h FIRMWARI REMOTE F W UPGRADE LOAD commou A auaa I en rn CONC R AY UPDATE CAMS To update the network Search the network system for an updateable file before proceeding with the update Check if the network connection is made properly 1 Press the lt NETWORK gt button can 2 Click lt CHECK gt to check if there is any new updateable file in the network
37. setup 1 Use the direction buttons to move to the upper lt SOUND gt icon and press the ENTER button The AUDIO setup screen appears 2 Use direction buttons A lt P to move to a desired item and press the ENTER button to set the value e LIVE AUDIO Turn on or off the audio output However the channel that is set to COVERT does not output sound Page 28 e DEFAULT AUDIO CHANNEL Select an audio channel to monitor among voice signals incoming from audio ports 1 through 4 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied DEFAULT AUDIO CHANNEL CANCEL APPLY CLOSE 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu BUZZER You can use the remote control to activate the buzzer Using the mouse may help easy setup 1 Use the direction buttons to move to lt BUZZER gt in the left corner of the SOUND setup screen and press the SOUND ENTER button wmo 2 Use direction buttons A Y lt P to move to lt REMOTE MY eee CONTROLLER and press the ENTER button to set the value 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu REMOTE CONTROLLER ry CANCEL APPLY CLOSE f
38. to the network enables you to perform various functions including remote monitoring remote search and remote control IP Router or HUB Cable ADSL Modem TETEE O gt x or 4 DDNS Server websamsung net Direct LAN Fixed Static IP Local PC 1 Local PC 2 External Remote PC 1 External Remote PC 2 1 Connect LAN cable of Cable ADSL modem or Direct Fixed Static IP LAN Line to WAN port of IP Router 2 Connect LAN ports of IP Router to Ethernet port DVR to be set up and to Ethernet port of Local PC to use during setup 3 Connect Video cable of Camera to Monitor 4 Turn on the Monitor power f you have a Static Fixed IP line or Dynamic IP line Cable Modem or ADSL Modem with one IP address whether it s dynamic or fixed but have more than one internet device to use such as a PC and a DVR or several DVRs you must use an IP Router different from a simple Network Hub You must set up the Router to work with the DVR and you must use a network capable PC within The local Router network to do the setup lf you are using an existing Router which is already set up you may not need to redo the basic setup of the Router again but it is highly recommended that you at least read all the instructions below and go through the steps Whether you are using an existing Router or a new Router you must go through the Port Forwarding por
39. using the same menu Single mode RECORD In addition to the existing recording you can proceed with recording directly in Live mode 1 Press the lt REC gt button from the Launcher menu or press the REC on the remote control This can be done by right clicking any area to display the context menu where you select lt RECORD START gt When the recording starts lt RECORD START gt will switch to lt RECORD STOP gt 2 The recording starts immediately with the lt l gt mark displayed on the top right corner 3 To stop recording press the lt REC gt button or click lt RECORD STOP gt English _21 IVe PLAYBACK In Live screen you can immediately play any of the previous recordings in the selected channel To playback by time option 1 2 Select a channel to play and right click it to display the context menu where you select lt PLAYBACK gt Select a desired start time of playback To playback by time selection 1 You can select lt GO TO gt if you want to select a playback start time When the TIME SELECTION window appears specify the start time and click lt OK gt The playback screen appears from the selected time point PLAYBACK SCREEN a x P bam ol pila T EY 1 re TIME SELECTION H i al 1 a A i ta 2010 01 01 10 28 02 jay F You can adjust the play speed of the instant recording scre
40. 2 168 0 200 WEB Femote Viewer User name admin vw Remember my password 3 Click lt Install ActiveX Control gt This site might requips the fallamina hati coc Install Actives Control What s the Risk Information Bar Help 4 Click lt Install gt Internet Explorer Security Warning Do you want to install this software Name WebYiewer Control Publisher Samsung Techwin Co Ltd B More options 5 When you see the Security Alert popup due to the Windows firewall function click lt Unblock gt to access the A i t To help protect your computer Windows Firewall has blocked Web Viewer Y some features of this program Windows Security Alert Do you want to keep blocking this program Name Internet Explorer C Publisher Microsoft Corporation Keep Blocking Unblock Ask Me Later Windows Firewall has blocked this program from accepting connections from the Internet or a network If you recognize the program or trust the publisher you can unblock it When should unblock a program 54 web viewer 6 Click lt Next gt when IMM4 Codec Setup Wizard appears 7 Click lt Install gt 8 Click lt Finish gt to exit setup 9 The installation is completed You will see the main screen of the Live Viewer ig Setup IMM4 Codec ig Setup IMM4 Codec Ready to Install Setup is now ready to begin installing IMM4 Codec on your computer Welcome to
41. Displays the software version T O H W VERSION Displays the hardware version a e VIDEO SIGNAL TYPE Displays the signal type of the WEB SERVER PORT 0a current video DISK CAPACITY Displays the capacity of the HDD IP ADDRESS Displays the IP address of the DVR MAC ADDRESS Displays the DVR s MAC address DDNS SERVER Displays the domain name of the appropriate set RTSP SERVICE PORT Indicates the number of a port used when the remote management software program accesses the DVR WEB SERVER PORT Indicates the number of a port used to connect to the DVR using the web browser e SYSTEM NAME Set the system name using virtual keyboard You can type in up to 15 bytes e FIRMWARE UPDATE You can upgrade the current software version For more information about the firmware update refer to To update the firmware Page 26 e FACTORY DEFAULT Restore the DVR settings to the factory default e SYSTEM DATA Save the system setup data or import the system information of other device SAVE Stores the setting information of the DVR into the storage device Connect the storage device to the USB port of the system LOAD Applies the setting information in the storage device to the DVR Connect the device to store the system data to the USB port e PASSWORD Turns on or off the popup of the LOG IN dialog if you access a menu item such as Power Off System Setup Record Setup Backup Search e AUTO LOGOUT Select to
42. Executables containing this object code plus portions of the Library will still fall under Section 6 Otherwise if the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work also fall under Section 6 whether or not they are linked directly with the Library itself 6 As an exception to the Sections above you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modification of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License If the work during execution displays copyright notices you must include the copyright notice for the Library among them as well as areference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable
43. ILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the library s name and an idea of what it does Copyright C year name of author This library is free software you can redistribute it and or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation either version 2 1 of the License or at your option any later version This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Lesser General Public License for more details You should have received a copy of t
44. P gt and press the ENTER button ni The login dialog appears RECORD SETUP 3 Select a user account and enter the password Only those users who have the right permissions can access the Setup menu RECORDING OPERATION You can specify the recording period with the pre and post recording times 1 Access lt RECORD SETUP to display the RECORDING OPERATIONS setup screen 2 Use direction buttons A Y lt gt to move to a desired _ _ item and press the ENTER button to set the value mE POST EVENT RECORDING TNE e SCHEDULE MODE Specify the schedule mode The specified schedule mode will be applied to Continuous Motion Record and Alarm Record e PRE EVENT RECORDING TIME Specify the pre event recording time that will be applied if an event occurs Recording will start before the specified time if an event Occurs e POST EVENT RECORDING TIME Specify the end recording time that will be applied if an event occurs Recording will continue after the specified time if an event occurs 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu English _45 dNLAS YAA LVR setup CONTINUOUS MOTION RECORDING You can specify the continuous recording time the recording size and the quality
45. ary does the same job as widely used non free libraries In this case there is little to gain by limiting the free library to free software only so we use the Lesser General Public License In other cases permission to use a particular library in non free programs enables a greater number of people to use a large body of free software For example permission to use the GNU C Library in non free programs enables many more people to use the whole GNU operating system as well as its variant the GNU Linux operating system Although the Lesser General Public License is Less protective of the users freedom it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library whereas the latter must be combined with the library in order to run TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License also called this License Each li
46. ata item will be played IZ For using the play button bar refer to Playback Page 51 52_ search amp play wep viewer INTRODUCTION What is web viewer Web Viewer a user friendly software program that enables you to connect to the DVR in a remote area and control the live or existing video data c System Requirements 2 The following lists the minimum suggested hardware and operating system requirements needed to run the n Web Viewer m J Windows XP Professional oS Windows Vista Home Basic Premium Windows 7 Web Browser MS Explorer 5 5 up 32 bit only CPU Intel Pentium 2 0 GHz Memory 512 MB Monitor High Color 16 bit 1024 x 768 50 MB Installation space required HDD Additional HDD space required for recording Recorded file size will vary depending on recording quality settings English _53 web viewer To connect to the Web Viewer 1 Open the browser and provide the IP address of the DVR File Edit or URL in the address bar OF Back 3 4 Se IZ You must have specified the IP address in NETWORK gt IP Y x 2 a a SETUP The initial URL of the DVR is the last 6 digits of the MAC address which you can check in SYSTEM gt SYSTEM MANAGEMENT gt SYSTEM INFORMATION Page 25 wiew Favorites Tools Help 2 As the administrator you should provide the admin ID and the password As a registered user you should provide the user ID and the password Connect to 19
47. ation interval for events occurred IZ A photo taken in a low contrast scene naturally causes a lot of noise and often occurs an unnecessary motion event which may cause damage to the camera set In such case set a function of E MAIL NOTIFICATION to OFF or set FREQUENCY to a longer time ex 30 MIN 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu English _43 LVR setup DISK MANAGEMENT You can specify the recording auto deletion and overwrite options and format the HDD recording data See the previous section to repeat steps 1 3 Page 23 1 Use the direction buttons to move to the upper lt DISK MANAGEMENTS icon and press the ENTER button The DISK MANAGEMENT screen appears 2 Use direction buttons A Y lt 1 gt to move to a desired item and press the ENTER button to set the value e AUTO DELETE Specify the auto deletion period You can search for recording data only in that specified period The Auto Delete function is available only if OVERWRITE is set to ON The NTSC type model does not support the function of AUTO DELETE lf there remains a large sized data file setup may take a while Note that recording will be disabled until setup is completed It will be disabled if OVERWRITE is set to OFF e OVERWRITE If set
48. ble the facility still operates and performs whatever part of its purpose remains meaningful For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the application Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Library In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or
49. bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu BUZZER OUT You can specify the alarm input channel and the event conditions for the buzzer Using the mouse may help easy setup 1 Use the direction buttons to move to lt BUZZER OUT gt in RR g the left corner of the EVENT SENSOR setup screen and EVENT SENSOR Dress the ENTER button OPERATION DISABLE PABA HDD EVENT ri EL MODE TRANSPARENT NBA DURATION 2 Use direction buttons A V lt gt to move to a desired E neu E item and press the ENTER button to set the value e OPERATION Set the operation of the buzzer output ae no e HDD EVENT Set the buzzer output if a HDD event OCCUrS e MODE Set the output mode of the buzzer If set to lt LATCHEDs gt the buzzer will sound for as much time as defined in DURATION If set to lt TRANSPARENT gt the DURATION item will be disabled e DURATION Set the duration of the buzzer output lf you select lt UNTIL KEY gt the buzzer will be stopped when you press any button on the front panel or the remote control e ALARM VIDEO LOSS MOTION Set the buzzer output for each channel if an event of alarm video loss or motion detection occurs 42 DVR setup 3 When your settings are completed press the lt APPLY gt button on the bottom You
50. censee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those functions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that u
51. cillary propagation of a covered work occurring solely as a consequence of using peer to peer transmission to receive a copy likewise does not require acceptance However nothing other than this License grants you permission to propagate or modify any covered work These actions infringe copyright if you do not accept this License Therefore by modifying or propagating a covered work you indicate your acceptance of this License to do so 10 Automatic Licensing of Downstream Recipients Each time you convey a covered work the recipient automatically receives a license from the original licensors to run modify and propagate that work subject to this License You are not responsible for enforcing compliance by third parties with this License An entity transaction is a transaction transferring control of an organization or substantially all assets of one or subdividing an organization or merging organizations If propagation of a covered work results from an entity transaction each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party s predecessor in interest had or could give under the previous paragraph plus a right to possession of the Corresponding Source of the work from the predecessor in interest if the predecessor has it or can get It with reasonable efforts You may not impose any further restrictions on the exercise of the rights granted or affirmed under
52. cision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms t
53. ckboxes 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied a CANCEL APPLY CLOSE i 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu English _35 DVK setup NETWORK You can configure the settings of IP SETUP DDNS and E MAIL See the previous section to repeat steps 1 3 Page 23 IP SETUP You can specify the IP of the DVR according to the network connection Using the mouse may help easy setup 1 Use the direction buttons to move to the upper lt NETWORK gt icon and press the ENTER button The IP Setup screen appears 2 Use direction buttons A lt 1 gt to move to a desired item and press the ENTER button to set the value e DHCP Set the IP address of the DVR to a dynamic IP If lt DHCP gt is selected the setting values of IP ADDRESS fu an 255 255 255 0 GATEWAY SUBNET MASK 1st DNS SERVER and 2nd iene cee 160 126691 DNS SERVER will be automatically filled RISPSERVICEPORT s54 e f lt DHCP gt is not selected you should manually enter the setting values of IP ADDRESS GATEWAY ua SUBNET MASK 1st DNS SERVER and 2nd DNS i SERVER For the IP address contact the network administrator e IP ADDRESS Enter an IP address e GATEWAY Enter a gateway address
54. consumer product which means any tangible personal property which is normally used for personal family or household purposes or 2 anything designed or sold for incorporation into a dwelling In determining whether a product is a consumer product doubtful cases shall be resolved in favor of coverage For a particular product received by a particular user normally used refers to a typical or common use of that class of product regardless of the status of the particular user or of the way in which the particular user actually uses or expects or is expected to use the product A product is a consumer product regardless of whether the product has substantial commercial industrial or non consumer uses unless such uses represent the only significant mode of use of the product Installation Information for a User Product means any methods procedures authorization keys or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made If you convey an object code work under this section in or with or specifically for use in a User Product and the conveying occurs as part of a transaction in which the right of possession and use of the User Prod
55. distribution medium does not bring the other work under the scope of this License 3 You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you must alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library 4 You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the r
56. e APPENDIX 69 Product Specification 71 Open Source License Report on the Product English _9 overview PART NAMES AND FUNCTIONS FRONT Part Names Functions 1 Power Used to turn on or off the system Each time you press in Live mode the screen will be switched in the sequence of 4 split Single 2 DISPLAY and Auto Sequence in order 3 SERACH Goes to the search screen 4 MENU Goes to the system menu screen Direction A V lt gt Used to select a system menu item 5 Enter IE Selects and runs a menu item This will operate as Book mark Reverse button during playback gt gt Used for quick forward playback Speed Playback lt lt Used for quick backward playback Freeze Il Freezes the screen or resumes playing Return Used to move one level up in the menu screen NETWORK Displays both network connection and data transfer status REC Flashes while the recording is in progress LED ALARM Flashes if an event occurs POWER Displays the status ON OFF of power connection USB Port Used to connect a USB storage device 10 overview PART NAMES AND FUNCTIONS REAR NETWORK Part Names DC Input DC12V VIDEO IN AUDIO IN NMAIAdSAO Functions Power connection port for 12V 4A adaptor a NETWORK RJ 45 port for network connection 2 USB Supports USB 2 0 protoco
57. e SUBNET MASK Enter a subnet mask address e st DNS SERVER Enter the first DNS server address e 2nd DNS SERVER Enter the second DNS server address e RTSP SERVICE PORT Indicates a port used when the remote management software program accesses the DVR e WEB SERVER PORT Indicates a port used to connect to the DVR using the web browser e AUTO PORT Registers connectable address from outside to DDNS HOST NAME automatically e DELETE PORT Unblock registered port forwarding status e PORT TEST Check the current RTSP PORT HTTP PORT status by itself whether it is connectable e DDNS HOST NAME Displays the MAC address of the DVR that connects to the DDNS e MAX TX SPEED Set the network transfer speed Select one from 56 128 256 512 1024 2048 4096 8192KBYTE The video will be transferred below the set speed which may differ according to the network connection status 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied MAX TX SPEED 8192 KBYTE bd 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu 36_ DVR setup To view the HELP You can view the explanation of each item of the IP SETUP menu 1 Press the lt HELP gt button in the lower corner of the IP SETUP menu DHCP When enabled the DVR will obtain an IP address automatically if connected to a DHCP server or router 2 Read through
58. e a A pi other to the G port a en zs Connecting the alarm output signal nn sss ALARMIN RELAY pees Connection port for the alarm output signal e NO Normal Open Sensor is open in normal condition it generates alarm if the sensor is closed e COM Connect the grounding cable e NC Normal Close Sensor is closed in normal condition it generates alarm if the sensor is open feet a by interruption E T T TON S TT S rr 1 f 1 z O 14_ connecting with other device NETWORK CONNECTION Local System Configuration Use the router or hub in the same local network to connect to the DVR and local PC where you can control the remote DVR or check the recording data in the DVR IP Router or HUB SAMSUNG som CA4 DVR Local PC 1 Local PC 2 ADIAAG HAHLO HLIM SNILOANNOO 1 Connect the network port on the rear DVR panel to the router or hub 2 Connect the network port on the local PC to the router or hub 3 Enter IP ADDRESS WEB SERVER PORT for the DVR on the local PC The Web Viewer screen of the DVR appears IZ For more information refer to Network Connection and Settings Page 38 English _15 connecting with_otner device Total System Configuration You can use the 10 100 Mbps Ethernet connector on the product to connect to the network Connecting
59. e confirmation dialog and return to the previous menu dNLAS YAA ALARM INPUT You can specify the availability of the alarm input and the alarm operation type Using the mouse may help easy setup 1 Use the direction buttons to move to lt ALARM INPUT gt A in the left corner of the EVENT SENSOR setup screen EVENT SENSOR and press the ENTER button a 2 Use direction buttons A V lt P to move to a desired TD esr pwee item and press the ENTER button to set the value e OPERATION Set the connection status of the alarm a sensor to either ENABLE or DISABLE NoncTN lf the alarm sensor is set to lt ENABLE gt and you have set to perform recording if an alarm occurs the Live screen displays the alarm recording standby mode Page 47 e TYPE Specify the sensor type N O Normal Open The sensor stays open at all times while the alarm operates if the sensor is closed N C Normal Close The sensor stays closed at all times while the alarm operates if the sensor is open e TEXT To easily locate the alarming point when an event occurs rename the alarming point Fi a id CANCEL APPLY CLOSE i 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu English _41 UVR set
60. e motion pop up This will display the motion popup for as much time as you specified and return to the split screen fan alarm occurs or a motion is detected in more than one channel the screen will switch to a split mode for the display Your settings will be applied dNLAS YAA You can select a split mode of the sequence and add or adjust the sequence dwell time Using the mouse may help easy setup ADDING SEQUENCE 1 2 Press the lt ADD gt button on the bottom t DEFAULT 3 When the ADD window appears select the TITLE input IZ For using the virtual keyboard refer to Using the Virtual a Use the virtual Keyboard to enter the name and press the Use the direction buttons to move to the lt SEQUENCE gt in the left corner of the DISPLAY setup screen and press the ENTER button ACTIVATION box CANCEL APPLY CLOSE lt SAVE gt button a MONITOR m SEQUENCE TITLE A lll ACTIVATION SEQUENCE Keyboard Page 27 CAVE CANCEL APPLY CLOSE t English _31 DVK setup 5 When the ADD SEQUENCE window appears press the lt ADD gt button 6 When the SEQUENCE SETUP window appears Use direction buttons A Y lt gt to move to a desired item and press the ENTER button to set the value e VIEW TYPE Select a split mode to sequence e CONFIGURE Select a channel to display o
61. e the System menu settings to your preference To start the SYSTEM SETUP 1 Press the MENU button on the remote control or press the lt MENU gt button on the launcher menu The SETUP menu screen appears 2 Use the direction buttons to move to lt SYSTEM SETUP gt e and press the ENTER button ai i ESE The login dialog appears 3 Select a user account and enter the password Only those users who have the right permissions can access the Setup menu English _23 LVR setup SYSTEM You can configure the settings of DATE TIME SYSTEM MANAGEMENT and REMOTE CONTROLLER See the previous section to repeat steps 1 3 Page 23 DATE TIME You can specify the display time Using the mouse may help easy setup 1 Use the direction buttons to move to the upper lt SYSTEM gt icon and press the ENTER button The DATE TIME setup screen appears 2 Use direction buttons A lt P to move to a desired eh item and press the ENTER button to set the value ES system e DATE TIME Set the current time and date one sner m IN DATE FORMAT Set the date format SS Paaerona oe AS YYYY MM DD DD MM YYYY MM DD YYYY ee Sa gt e TIME FORMAT Set the time format to either AM PM or T 24 hours e NETWORK TIME SERVER SETUP Set the current time s aiis using the time server gum If you press the lt SYNC gt button while c
62. ed to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The GNU General Public License is a free copyleft license for software and other kinds of works The licenses for most software and other practical works are designed to take away your freedom to share and change the works By contrast the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program to make sure it remains free software for all its users We the Free Software Foundation use the GNU General Public License for most of our software it applies also to any other work released this way by its authors You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for them if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to prevent others from denying you these rights or asking you to surrender the rights Therefore you have certain responsibilities if you distribute copies of the software or if you modify it responsibilities to respect the freedom of others For example if you distribute copies of such a program
63. eded for reproducing the executable from it However as a Special exception the materials to be distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute 7 You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work 8 You may not copy modify sublicense link with o
64. en that is currently played Shows the playback time El Plays backward in the following speed X2 X4 X8 X16 X82 X64 Reduces the speed in forward playback Plays backward Pauses playing temporarily Plays forward Plays forward in the following speed X2 X4 X8 X16 X32 X64 Reduces the speed in backward playback ES Closes the playback screen IZ In INSTANT PLAYBACK mode SRD 450 plays the video without the audio 22_ live LVR setup BEFORE STARTING SETTING UP You can configure the DVR settings to your preference How to use remote control and mouse You can use either the remote control or the cursor to select or change the setting of each menu item To change the setting using the remote control 1 Use the four direction A Y lt gt buttons to move to a desired item and press the ENTER button You must press the ENTER button to confirm the selected item dNLAS YAA N Use the up down A buttons to adjust the given option values e UP A Adjusts to the previous value of the selected item e DOWN Adjusts to the next value of the selected item Change the setting and press ENTER before your change can be applied oO 4 To return to the previous menu press the RETURN menu The player will return to the previous menu without saving your changes SYSTEM SETUP You can configur
65. ened constantly by software patents States should not allow patents to restrict development and use of software on general purpose computers but in those that do we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary To prevent this the GPL assures that patents cannot be used to render the program non free The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS 0 Definitions This License refers to version 3 of the GNU General Public License Copyright also means copyright like laws that apply to other kinds of works such as semiconductor masks The Program refers to any copyrightable work licensed under this License Each licensee is addressed as you Licensees and recipients may be individuals or organizations To modify a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission other than the making of an exact copy The resulting work is called a modified version of the earlier work or a work based on the earlier work A covered work means either the unmodified Program or a work based on the Program To propagate a work means to do anything with it that without permission would make you directly or secondarily liable for infringement under applicable copyright law except executing it on a computer o
66. equirement to distribute the source code even though third parties are not compelled to copy the source along with the object code 5 A program that contains no derivative of any portion of the Library but is designed to work with the Library by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portions of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a derivative work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law If such an object file uses only numerical parameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work
67. er system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 12 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 13 The Free Software Foundation may publish revised and or new versions of the Lesser General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever published by the Free Software Foundation 14 If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible w
68. essary 3 Protecting Users Legal Rights From Anti Circumvention Law No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996 or similar laws prohibiting or restricting circumvention of such measures When you convey a covered work you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work and you disclaim any intention to limit operation or modification of the work as a means of enforcing against the work s users your or third parties legal rights to forbid circumvention of technological measures 4 Conveying Verbatim Copies You may convey verbatim copies of the Program s source Code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice keep intact all notices stating that this License and any non permissive terms added in accord with section 7 apply to the code keep intact all notices of the absence of any warranty and give all recipients a copy of this License along with the Program You may charge any price or no price for each copy that you convey and you may offer support or warranty protection for a fee 5 Conveying Modified Source Versions You may c
69. essor of the GNU Library Public License version 2 hence the version number 2 1 Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This license the Lesser General Public License applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it You can use it too but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case based on the explanations below When we speak of free software we are referring to freedom of use not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software and use pieces of it in new free programs and that you are informed that you can do these things To protect your rights we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you m
70. f Video Record 4CH e Continuous REC e Schedule REC e Alarm REC Rec Play Search SEW Motion REC e Time Laps REC NTSC 1 2 3 7 15 30ips PAL 1 2 3 7 13 25ips e Instant REC Panic REC e Play Pause Stop Play Speed e Fast Forward Reverse 2x 4x 8x 16x 32x 64x e Step Play Forward Reverse Storage 500GB e Time Search Data Time Calendar search Mode e Event Continuous Alarm Motion Other English _69 XIGNAddV aoocendkx Web Viewer Network Backup Time Other Functions Control Mechanical Set Environmental Electrical 70_ appendix Item Details Client PC SPEC e MS Explorer 5 5 up 32 bit only support OS Windows XP Windows Vista Windows 7 e Live Backup Search e Support multi language Web Viewer Function NTSC ENGLISH FRANCAIS ESPANOL PAL ENGLISH FRANCAIS DEUTSCH ESPANOL ITALIANO T URK PYCCKMM SVENSKA CESKY security Password User Name Protection Remote Monitoring Remote Searching Connection No Interface Network Protocol USB 2 0 I F Back up File Format 4 Date Time Event List Search 4 1 Web Viewer 1 PC LAN 1 port 10 100 Mbps Ethernet DHCP DNS DDNS NTP e Front 1 Rear 1 e External HDD e USB Memory AVI Time Adjsutment GMT Time Zone DST NTP Support e S W upgrade USB memory Network e Live amp Network monitoring without HDD e Support multi language Other Functions NTSC ENGLISH FRANCAIS ESPANOL i
71. he GNU Lesser General Public License along with this library if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker signature of Ty Coon 1 April 1990 Ty Coon President of Vice OpenSSL LICENSE Copyright c 1998 2006 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit htto www openssl org
72. ience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the e Unplug this apparatus during lightning storms or when unused for long periods Na manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over WAI of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way Such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English _3 MAIAGSAO overview CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION 10 REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit A This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING e To reduce the risk of fire or electric shock do not expose this appliance to rain or mois
73. ies of the object code with a copy of the written offer to provide the Corresponding Source This alternative is allowed only occasionally and noncommercially and only if you received the object code with such an offer in accord with subsection 6b d Convey the object code by offering access from a designated place gratis or for a charge and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge You need not require recipients to copy the Corresponding Source along with the object code If the place to copy the object code is a network server the Corresponding Source may be on a different server operated by you or a third party that supports equivalent copying facilities provided you maintain clear directions next to the object code saying where to find the Corresponding Source Regardless of what server hosts the Corresponding Source you remain obligated to ensure that it is available for as long as needed to satisfy these requirements e Convey the object code using peer to peer transmission provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d A separable portion of the object code whose source code is excluded from the Corresponding Source as a system Library need not be included in conveying the object code work A User Product is either 1 a
74. in numbered version of the GNU General Public License or any later version applies to it you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation If the Program does not specify a version number of the GNU General Public License you may choose any version ever published by the Free Software Foundation If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used that proxy s public statement of acceptance of a version permanently authorizes you to choose that version for the Program Later license versions may give you additional or different permissions However no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version 15 Disclaimer of Warranty THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 Limitati
75. ing disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 If you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjh cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivati
76. ings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu MONITOR You can specify the items and time interval that are displayed on the monitor Using the mouse may help easy setup 1 Use the direction buttons to move to lt MONITOR gt in the left corner of the DISPLAY setup screen and press the ENTER button SEQUENCE DWELL DE INTERLACE MODE ALARM POP UP MODE ALARM POP UP DWELL MOTION POP UP MODE MOTION POP UP DWELL 30_ DVR setup SEQUENCE When your settings are completed press the lt APPLY gt button on the bottom Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu Use direction buttons A Y lt P to move to a desired item and press the ENTER button to set the value e SEQUENCE DWELL Specify the auto sequence dwell time e DE INTERLACE MODE Set to correct option of the screen trembling during playing in 4CIF size e ALARM POP UP MODE Set to turn on or off the display of the alarm channel if an alarm occurs e ALARM POP UP DWELL Set the duration of the alarm dwell time if an alarm occurs e MOTION POP UP MODE Set to turn on or off the switching to the motion detecting channel s full screen mode if a motion is detected e MOTION POP UP DWELL Set the dwell time of th
77. ith these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 15 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 INNO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FA
78. ivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section
79. l that enables you to back up the video signal stored in the HDD using an external memory device and to connect USB memory 3 VIDEO IN Composite video signal input port BNC type port 4 VIDEO OUT Composite video signal output port BNC type port 5 AUDIO IN Audio signal input port RCA jack 6 AUDIO OUT Audio signal output port RCA jack VGA OUT Video output port for video output to a VGA monitor ALARM IN Alarm input port RELAY Alarm output port English _11 overview REMOTE CONTROL DVR Available after switching to DVR mode by pressing the DVR button on the remote control SEARCH BACKUP Switches to search mode for video search MODE SEARCH BAqKUP CLOSE Switches to backup mode At the moment you should select an authorized user and enter the password a MONITOR en the DVR function MODE Changes the display mode Turns on off or logout the system Channel S3 If you press a channel number in real time monitoring or search mode the camera s input of the selected a Va ID channel is displayed in full screen l Sets the ID Select 2 digits from 0 9 while pressing the ID Key D gt Colmes Play cooo Plays the search screen or adjusts the speed RETURN Cancels the setting and moves to the previous MENU screen You will see various menu items including settings search and backup Directions E om a ENTER Used to move between menu items in
80. lish _47 dNLAS YAA LVR setup To specify the alarm recording time You can specify the alarm recording time for each channel 1 3 The specified cells will turn light green 4 When your settings are completed press the lt APPLY gt From the ALARM RECORDING menu screen select lt ACTIVATIONS gt Your change to the recording size will be applied to the time bar iii ceessroxs e FF ToN Drag the cell that you want to adjust the size or use the Bhasa cre OTe eee ALARM em tt direction buttons A Y lt gt on the remote control and a press the ENTER button p f i y i CANCEL APPLY CLOSE a button on the bottom Your settings will be applied Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu INSTANT RECORDING You can specify the recording size in manual recording mode Using the mouse may help easy setup 1 3 When the size adjustment is done press the lt OK gt button 4 When your settings are completed press the lt APPLY gt Press the lt CLOSE gt button to display the confirmation Use the direction buttons to move to lt INSTANT RECORDING in the left corner of the RECORD setup i screen and press the ENTER button RECORDING Use direction buttons A lt P to move to
81. luded in this License to the extent that they are valid under applicable law If additional permissions apply only to part of the Program that part may be used separately under those permissions but the entire Program remains governed by this License without regard to the additional permissions When you convey a copy of a covered work you may at your option remove any additional permissions from that copy or from any part of it Additional permissions may be written to require their own removal in certain cases when you modify the work You may place additional permissions on material added by you to a covered work for which you have or can give appropriate copyright permission Notwithstanding any other provision of this License for material you add to a covered work you may if authorized by the copyright holders of that material supplement the terms of this License with terms a Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License or b Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it or c Prohibiting misrepresentation of the origin of that material or requiring that modified versions of such material be marked in reasonable ways as different from the original version or d Limiting the use for publicity purposes of names of licensors or autho
82. n an event occurs 3 When done press the lt OK gt button The added user account will be listed 4 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 5 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu 34_ DVR setup To change the user information 1 Select a user account that you want to change in the user fem list Bz user The EDIT window appears 2 Make necessary changes and press the lt OK gt button on The admin ID can not be removed 3 To remove a user account press the lt DELETE gt button 4 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied CANCEL APPLY CLOSE 5 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu dNLAS YAA USER AUTHORITY You can set to allow or deny access of a user according to the user group Using the mouse may help easy setup 1 Use the direction buttons to move to lt USER AUTHORITY gt Fem in the left corner of the USER setup screen and press the Bz useR ENTER button 2 Select all the menu items that a user can access with the Eo Jiti MANAGER or USER account by checking the applicable che
83. n dialog and return to the previous menu ALARM RECORDING You can specify the recording size and the quality that will be applied if an alarm event occurs Using the mouse may help easy setup 1 Use the direction buttons to move to lt ALARM RECORDING in the left corner of the RECORD setup fm RECORD screen and press the ENTER button ACTWATION il wrote 2 From the lt TIME gt bar select a cell that you want to mE adjust the size reconon EE The size adjustment window appears recon D 3 Use direction buttons A V lt P to move to a desired item and press the ENTER button to set the value e SIZE Set the recording resolution e FPS Set the frame rate per second e QUALITY Set the recording quality Select one from LOW STANDARD HIGH HIGHEST The recordable time may differ depending on the recording quality e AUDIO Select whether to include audio input to the recording e ALARM Select an alarm input port e Remaining Rate If you change the settings of the resolution and the remaining rate the frame rate available for each resolution will be recalculated 4 Press the lt OK gt button 5 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 6 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu Eng
84. n each split screen om ce SEQUENCE SETUP VIEW TYPE CONFIGURE CONFIRM eZ en CLOSE 7 Press the lt CONFIRM gt button The set sequence mode will be confirmed and displayed on the ADD window 8 When completed press the lt ADD gt button on the bottom The set sequence type will be saved and you will move to the previous screen EDITTING SEQUENCE 1 Select a list to edit en The EDIT window appears DISPLAY 2 Use direction buttons A V lt P to move to a desired oo a lt eee item and press the ENTER button to set the value mE E me 5 z e SEQUENCE TITLE Select the TITLE input box ani O ee reres CAMS e ACTIVATION Set to perform the sequence e MODIFY You can change the sequence mode setting For setting the sequence mode refer to ADDING SEQUENCE Page 31 e DELETE Deletes the selected sequence list e CANCEL Cancels your changes 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu 32_ DVR setup SOUND You can configure the settings of AUDIO and BUZZER See the previous section to repeat steps 1 3 Page 23 AUDIO You can select to input the live audio source and select an audio channel Using the mouse may help easy
85. neighborhood of DST transition ON OFF time If you want to back up this period do it on the DVR set please dNMOVd NEW BACKUP You can backup the reserved data to the connected storage device Using the mouse may help easy setup 1 Access the BACKUP menu to display the lt NEW BACKUP gt setup screen NEW 2010 01 01 08 29 59 P 2 Use direction buttons A Y lt P to move to a desired Novevice PEJ anion ooo Ed in cr FR CODEC pr item and press the ENTER button to set the value gfe ata e TAG Enter a name for each data item that you want to Fe reserve e DEVICE Select an external storage device to which you sacra save the backup data e FROM Specify the backup start time e TO Specify the backup end time e LOG If you want to receive the system log file check the log item and proceed with the query session e CODEC Before you can play the backup data properly with Media Player check the item that you want to play and download the codec as well Check before proceeding with the query session PAL Only IZ f lt D S T gt set to lt ON gt you can see overlapped time by pressing lt BJ D gt By double clicking the backup codec install it in your PC Then get started with Media Player If
86. nges will be saved HDD Event Setting 1 From the left menu tree select lt Sensor gt a E 2 Click lt HDD Events monoms 3 Make your changes as necessary in details For more information refer to HDD EVENT Page 40 4 Click lt Ok gt Your changes will be saved Alarm Input Setting 1 From the left menu tree select lt Sensor gt 2 Click lt Alarm Input gt 3 Make your changes as necessary in details For more information refer to ALARM INPUT Page 41 4 Click lt Ok gt Your changes will be saved 66 web viewer Alarm output setting 1 From the left menu tree select lt Sensor gt 2 Click lt Alarm Output gt 3 Make your changes as necessary in details For more information refer to ALARM OUTPUT Page 42 4 Click lt Ok gt Your changes will be saved Buzzer out setting dAMGIA JM 1 From the left menu tree select lt Sensor gt 2 Click lt Buzzer Out gt 3 Make your changes as necessary in details For more information refer to BUZZER OUT Page 42 4 Click lt Ok gt Your changes will be saved E mail notification setting 1 From the left menu tree select lt Sensor gt 2 Click lt E mail Notification gt 3 Make your changes as necessary in details For more information refer to E MAIL NOTIFICATION Page 43 4 Click lt Ok gt Your changes will be saved INFORMATION
87. o Your New Programs If you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found one line to give the program s name and an idea of what it does Copyright C yyyy name of author This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in
88. o patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your Obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any oth
89. odify it For example if you distribute copies of the library whether gratis or for a fee you must give the recipients all the rights that we gave you You must make sure that they too receive or can get the source code If you link other code with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights We protect your rights with a two step method 1 we copyright the library and 2 we offer you this license which gives you legal permission to copy distribute and or modify the library To protect each distributor we want to make it very clear that there is no warranty for the free library Also if the library is modified by someone else and passed on the recipients should know that what they have is not the original version so that the original author s reputation will not be affected by problems that might be introduced by others Finally software patents pose a constant threat to the existence of any free program We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder Therefore we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license Most GNU software including
90. on of Liability IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MODIFIES AND OR CONVEYS THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 17 Interpretation of Sections 15 and 16 If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee END OF TERMS AND CONDITIONS GNU LESSER GENERAL PUBLIC LICENSE Version 2 1 February 1999 Copyright C 1991 1999 Free Software Foundation Inc 51 Franklin Street Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed This is the first released version of the Lesser GPL It also counts as the succ
91. onnected to Internet the time will be set from the time server If the player has an existing recording data in the same time schedule you are prompted to delete it Please check the followings if NTP does not work properly IP ADDRESS GATEWAY SUBNET MASK 1st DNS SERVER 2nd DNS SERVER of IP SETUP in NETWORK menu e TIME ZONE SETUP Set the GMT standard time of your area e D S T Turn on or off the daylight saving time 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu 24 DVR setup SYSTEM MANAGEMENT You can check update and initialize the system information Using the mouse may help easy setup 1 Use the direction buttons to move to lt SYSTEM CAW MANAGEMENTS in the left corner of the SYSTEM setup ES system menu and press the ENTER button j s TETEN ae ID Use direction buttons A Y lt gt to move to a desired item E ANEIS Eeee and press the ENTER button to set the value mor p g lt J Cc U e SYSTEM INFORMATION Can check the current am system version and system related settings r SYSTEM Press the lt INFO gt to display the SYSTEM INFORMATION window Ar ssn ena S W VERSION
92. onvey a work based on the Program or the modifications to produce it from the Program in the form of source code under the terms of section 4 provided that you also meet all of these conditions a The work must carry prominent notices stating that you modified it and giving a relevant date b The work must carry prominent notices stating that it is released under this License and any conditions added under section 7 This requirement modifies the requirement in section 4 to keep intact all notices c You must license the entire work as a whole under this License to anyone who comes into possession of a copy This License will therefore apply along with any applicable section 7 additional terms to the whole of the work and all its parts regardless of how they are packaged This License gives no permission to license the work in any other way but it does not invalidate such permission if you have separately received it d If the work has interactive user interfaces each must display Appropriate Legal Notices however if the Program has interactive interfaces that do not display Appropriate Legal Notices your work need not make them do so A compilation of a covered work with other separate and independent works which are not by their nature extensions of the covered work and which are not combined with it such as to form a larger program in or on a volume of a storage or distribution medium is called an aggrega
93. opagate or modify a covered work except as expressly provided under this License Any attempt otherwise to propagate or modify it is void and will automatically terminate your rights under this License including any patent licenses granted under the third paragraph of section 11 However if you cease all violation of this License then your license from a particular copyright holder is reinstated a provisionally unless and until the copyright holder explicitly and finally terminates your license and b permanently if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation Moreover your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means this is the first time you have received notice of violation of this License for any work from that copyright holder and you cure the violation prior to 30 days after your receipt of the notice Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License If your rights have been terminated and not permanently reinstated you do not qualify to receive new licenses for the same material under section 10 9 Acceptance Not Required for Having Copies You are not required to accept this License in order to receive or run a copy of the Program An
94. ording so that the DVR can detect the event and specify the recording area Using the mouse may help easy setup 1 Use the direction buttons to move to lt MOTION SENSOR gt in the left corner of the CAMERA setup menu and press the U CAMERA ENTER button 2 Select a channel and specify the sensitivity of the motion detection 3 Press the lt AREA SETUP gt button The motion area setup screen appears SENSITIVITY 5 av AREA SETUP a AREA SETUP a AREA SETUP a Z AREA SETUP CANCEL APPLY CLOSE f dNLAS YAA To select a motion area 1 Move the cursor to display a white rectangle box 2 Move the box to the motion area and click the yellow box The selected area will be marked in a white box To deselect the motion area 1 Move the cursor to the selected area Click the yellow cell again 3 The yellow rectangle will disappear with the motion area deselected To select deselect all Right click any area or press the RETURN button on the remote control 2 From the context menu that pops up select a re desired item m e SELECT ALL Selects all areas n i e DESELECT ALL Deselects all areas iin e CANCEL Cancels your settings uA re e SAVE amp EXIT Saves your settings and exits the menu 111 i E 4 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 5
95. page Any questions concerning UPS consult your UPS retailer Operating Temperature The guaranteed operating temperature range of this product is 0 C 40 C 32 F 104 F This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one When using the device after a long period of storage at low temperature place the product at room temperature for a while and run it Especially for the built in HDD in the product its guaranteed temperature range is 5 C 55 C 41 F 131 F Likewise the hard drive may not work at a temperature below the guaranteed one Ethernet Port This equipment is in door use and all the communication wirings are limited to inside of the building IZ Mouse is optional not included in the pack Please consult compatibility list with Manufacturer 6 overview Standards Approvals FE Ce IZ This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause
96. plied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu COLOR You can adjust the brightness contrast tint and color of the image input to each camera channel Using the mouse may help easy setup 1 Use the direction buttons to move to lt COLOR3 gt in the left corner of the CAMERA setup screen and press the ENTER button 2 Use the direction buttons to move to a desired item of the camera channel to adjust its color and press the ENTER button The color adjustment menu appears 3 Use the up down A button in the bottom right corner to select a channel that you want to adjust the color of 4 Select an item and use the numeric values to adjust the color option values e BRIGHTNESS Adjusts the brightness of the monitor e CONTRAST Adjusts the contrast of the monitor e TINT Adjusts the luminance of the monitor e COLOR Adjusts the display color of the monitor BRIGHTNESS CONTRAST 50 ahd 50 5 To complete your changes and exit the menu click lt q gt a in the upper right corner 6 When your settings are completed press lt APPLY gt button on the bottom Your settings will be applied 7 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu 28 _ DVR setup MOTION SENSOR You can set the event rec
97. product includes software written by Tim Hudson tin cryptsoft com Original SSLeay License Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA lhash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tih cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the follow
98. protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to Know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistrioutors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION Version 2 June 1991 Copyright C 1989 1991 Free Software Foundation Inc 51 Franklin S 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any der
99. r distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or distribute the Library is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it 10 Each time you redistribute the Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties with this License 11 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited t
100. r modifying a private copy Propagation includes copying distribution with or without modification making available to the public and in some countries other activities as well To convey a work means any kind of propagation that enables other parties to make or receive copies Mere interaction with a user through a computer network with no transfer of a copy is not conveying An interactive user interface displays Appropriate Legal Notices to the extent that it includes a convenient and prominently visible feature that 1 displays an appropriate copyright notice and 2 tells the user that there is no warranty for the work except to the extent that warranties are provided that licensees may convey the work under this License and how to view a copy of this License If the interface presents a list of user commands or options such as a menu a prominent item in the list meets this criterion 1 Source Code The source code for a work means the preferred form of the work for making modifications to it Object code means any non source form of a work A Standard Interface means an interface that either is an official standard defined by a recognized standards body or in the case of interfaces specified for a particular programming language one that is widely used among developers working in that language The System Libraries of an executable work include anything other than the work
101. r settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu E MAIL NOTIFICATION You can specify the conditions so that you can send an email notice to DVR registered users at a certain interval or when an event Occurs Using the mouse may help easy setup g lt 1 Use the direction buttons to move to lt E MAIL a J NOTIFICATIONS in the left corner of the EVENT amp EVENT SENSOR 2 SENSOR setup screen and press the ENTER button eee are U 2 Use direction buttons A Y lt P to move to a desired m item and press the ENTER button to set the value e NOTIFICATION Turn on or off the notification of an a event if it occurs NOTFICATION If set to lt ON gt the applicable menu is activated where you can set other options If set to lt OFF gt other items will be disabled e SETUP CHANGE Turn on or off the notification of a setup change if it occurs e HDD EVENT Turn on or off the notification of a HDD event if it occurs e BOOTING EVENT Turn on or off the notification of an email when the system boots e SNAPSHOT NOTI Specify the sending of the snapshot when an event occurs e ALARM VIDEO LOSS MOTION Set the event notification for each channel if an event occurs such as alarm video loss or motion detection e FREQUENCY Set the notific
102. registers a domain name that the user remembers and a changed IP address with the DDNS server so that the user can redirect to the registered domain name if the previous IP address is changed in a dynamic IP environment 1 Use the direction buttons to move to lt DDNS gt in the left corner of the NETWORK setup menu and press the ENTER button DDNS ON ja v 2 Use direction buttons A V lt P to move to a desired mE as ee E item and press the ENTER button to set the value e DDNS Select to set the DDNS connection e DDNS SERVER Select a DDNS server to connect to e TEST Try atest connection to the DDNS server HELP CANCEL APPLY CLOSE 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu English _37 dNLAS YAA DVR setup E MAIL You can send an email notice to DVR registered users at a certain interval or when an event occurs Using the mouse may help easy setup 1 Use the direction buttons to move to lt E MAIL gt in the CAN left corner of the NETWORK setup menu and press the NETWORK ENTER button 2 Use direction buttons A Y lt gt to move to a desired SE item and set the value EMAL Pan e SERVER Set the mail server TESTEMAL This is a mail server
103. ress the lt OK gt button Your changes are saved and the window is closed When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied To set the record mode You can specify the record mode for each channel or time range From the CONTINUOUS MOTION RECORDING menu screen select lt ACTIVATION gt Your change to the recording size will be applied to the time bar i e 7 a CONTINUOUS iG fo eeoes ee ee eee Drag the cell that you want to adjust the size or use the a Emonon contor direction buttons A Y lt gt on the remote control and T press the ENTER button MOTION CONTINUOUS MOTION 46_ DVR setup 3 Select a desired event recording mode e NONE Does not perform recording e CONTINUOUS Performs the recording continuously e MOTION Performs the recording only if a motion is detected To record a motion set both lt SENSITIVITY gt and lt AREA SETUP gt in CAMERA gt MOTION SENSOR Page 29 e CONTINUOUS MOTION Performs both continuous and motion recording modes 4 Press the lt OK gt button The color of the specified area will be changed to the color of the specified record type 5 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 6 Press the lt CLOSE gt button to display the confirmatio
104. rogram the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or lb Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c
105. rs of the material or e Declining to grant rights under trademark law for use of some trade names trademarks or service marks or f Requiring indemnification of licensors and authors of that material by anyone who conveys the material or modified versions of it with contractual assumptions of liability to the recipient for any liability that these contractual assumptions directly impose on those licensors and authors All other non permissive additional terms are considered further restrictions within the meaning of section 10 If the Program as you received it or any part of it contains a notice stating that it is governed by this License along with a term that is a further restriction you may remove that term If a license document contains a further restriction but permits relicensing or conveying under this License you may add to a covered work material governed by the terms of that license document provided that the further restriction does not survive such relicensing or conveying If you add terms to a covered work in accord with this section you must place in the relevant source files a statement of the additional terms that apply to those files or a notice indicating where to find the applicable terms Additional terms permissive or non permissive may be stated in the form of a separately written license or stated as exceptions the above requirements apply either way 8 Termination You may not pr
106. s License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribu
107. s License they do not excuse you from the conditions of this License If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not convey it at all For example if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program 13 Use with the GNU Affero General Public License Notwithstanding any other provision of this License you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work and to convey the resulting work The terms of this License will continue to apply to the part which is the covered work but the special requirements of the GNU Affero General Public License section 13 concerning interaction through a network will apply to the combination as such 14 Revised Versions of this License The Free Software Foundation may publish revised and or new versions of the GNU General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies that a certa
108. ses the Library does 1 You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License d If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or ta
109. some libraries is covered by the ordinary GNU General Public License This license the GNU Lesser General Public License applies to certain designated libraries and is quite different from the ordinary General Public License We use this license for certain libraries in order to permit linking those libraries into non free programs When a program is linked with a library whether statically or using a shared library the combination of the two is legally speaking a combined work a derivative of the original library The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom The Lesser General Public License permits more lax criteria for linking other code with the library We call this license the Lesser General Public License because it does Less to protect the user s freedom than the ordinary General Public License It also provides other free software developers Less of an advantage over competing non free programs These disadvantages are the reason we use the ordinary General Public License for many libraries However the Lesser license provides advantages in certain special circumstances For example on rare occasions there may be a special need to encourage the widest possible use of a certain library so that it becomes a de facto standard To achieve this non free programs must be allowed to use the library A more frequent case is that a free libr
110. system for checking problems please consult the expert from the shop where you bought the product e Before installing an additional HDD or connecting an external storage device USB memory or USB HDD to this DVR check the compatibility Consult your provider for the compatibility list Warning Battery Exchanging a wrong battery in your product may cause an explosion Therefore you must use the same type of battery as the one being used in the product The following are the specifications of the battery you are using now e Normal voltage 3V CALIFORNIA USA ONLY e Normal capacity 170mAh This Perchlorate warning applies only to primary CR Manganese Dioxide e Continuous standard load 0 2mA Lithium coin cells in the product sold or distributed ONLY in California USA O Perchlorate Material special handling may apply See www dtsc ca gov e Operating temperature 20 C 85 C hazardouswaste perchlorate 4 F 185 F System Shutdown Turning off the power while the product is in operation or taking not permitted actions may cause damage to the hard drive or the product Also it can cause a dysfunction to the hard disk while using the product Please turn off the power using the Remote Controller or Mouse After entering password in the pop up menu you can turn off the power switch You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected power stop
111. tails For more information refer to MONITOR Page 30 4 Click lt Ok gt Your changes will be saved Audio Buzzer setting Moniter Getting Spiet Sequenti Cwpl 5 Ses Dea itertace Mode Alarm Pop up mode om Alarm Pap up Dwal 4 Si Moan Pop up Mode g Mobon Pop up Cwen 6 ge You can configure the audio and buzzer related settings 1 From the left menu tree select lt Sound gt 2 Make your changes as necessary in details For more information refer to AUDIO and BUZZER Page 33 3 Click lt Ok gt Your changes will be saved Date Time setting Audio Betting LIVE ld On Grau Audid Channel ot CH Buzier Setting 1 From the left menu tree select lt System gt 2 Make your changes as necessary in details For more information refer to DATE TIME Page 24 3 Click lt Ok gt Your changes will be saved Management setting DateTime Seting Time Format Hour ie Format oe 1 From the left menu tree select lt System gt 2 Click lt Management gt 3 Check the system information in lt System Information Setting gt For more information refer to SYSTEM MANAGEMENT Page 25 4 Change the System Name in lt System management Setting gt 5 Click lt Ok gt Your changes will be saved Syatem information Fetting Trey BAY Asad z If E videa Signal Type RTSP Serice Port Web Server Port
112. te if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation s users beyond what the individual works permit Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate 6 Conveying Non Source Forms You may convey a covered work in object code form under the terms of sections 4 and 5 provided that you also convey the machine readable Corresponding Source under the terms of this License in one of these ways a Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange b Convey the object code in or embodied in a physical product including a physical distribution medium accompanied by a written offer valid for at least three years and valid for as long as you offer spare parts or customer support for that product model to give anyone who possesses the object code either 1 a copy of the Corresponding Source for all the software in the product that is covered by this License ona durable physical medium customarily used for software interchange for a price no more than your reasonable cost of physically performing this conveying of source or 2 access to copy the Corresponding Source from a network server at no charge c Convey individual cop
113. the IMM4 Codec Setup Wizard This will install IMM 4 YCM Codec 4 0 0 3 on your computer It is recommended that you close all other applications before continuing Click Next to continue or Cancel to exit Setup i Cancel Click Install to continue with the installation dAMGIA JJM ig Setup IMM4 Codec Install 4 Cancel Completing the IMM4 Codec Setup Wizard Setup has finished installing IMM4 Codec on your computer Click Finish to exit Setup English _55 web viewer LIVE VIEWER Live Viewer At a Glance Name Description ee SSIES Consists of 4 tabs lt Live gt lt Search gt lt Setup gt and lt Information gt Live Viewer Screen Displays the Live screen of the currently connected DVR Split Screen Switches the screen mode to Single 4 split mode Status Indicates the status of each channel Log Shows the log Reload loads the DVR information again Refresh Time specify the refresh time Capture Image Captures the selected screen ActiveX Setting specify the saving path of the recorded or captured screen Print Prints out the current screen Save Saves the Live video that is displayed on the screen Sees o N le a e o N amp Channel Selection 56_ web viewer Select a channel to display on the screen IZ When you can t save the image check if the following is applied in your Internet Explorer Securit
114. the help and press the lt CLOSE gt button a See es to close the window Pee lM ioner vas 1ronce is not veing usa te bet mask can be mamas 1ST DNS SERVER If DHCP is not being used the first DNS server can be manually set 2ND DNS SERVER If DHCP is not being used the second DNS server can be manually set RTSP User can input a port number which is 554 or greater than 1024 as RTSP service port WEB SERVER PORT The port number that the DVR uses to support remote connection from Internet Explorer or other web browsers DDNS Name After automatic port forwarding it shows an address that user can connect MAX TX SPEED Specifies the maximum bandwidth that the DVR can use during a remote connection DDNS When enabled the DVR can be accessed through a Dynamic DNS server Commonly used if a broadhand connection does not have a static IP address DDNS SERVER If DDNS is enabled the host DDNS server is specified here DDNS HOST NAME User can input a name of server that can serve dynamic DNS service CLOSE CANCEL APPLY CLOSE DDNS You can specify a DDNS site to access when a remote user connects to the network Using the mouse may help easy setup DDNS is an acronym for Dynamic DNS Domain Name System DNS is a domain service that directs the character based easy to remember domain name ex www google com to the number based IP address 64 233 189 104 DDNS Dynamic DNS is the IP registration service that
115. the playback screen of the recorded video Play Bar Buttons used to control the playback screen Split Screen Por more information refer to Live Viewer Ata Glance Date amp Time select a time range to play Record Properties Set the recording properties as necessary l N e a A Ante Timeline Shows the playback channel time range and recording properties which you can change Backup Backs up the current video Play Plays the video that matches the search criteria English _59 wep viewer Name Description Refresh Refreshes the screen ActiveX Setting specify the saving path of the recorded or captured screen Capture Image Captures the current screen Print Prints out the current screen Saws eS Channel Selection Select a channel of the camera that is connected to the DVR IZ For details about the ActiveX setting Capture Image Print menus refer to Live Viewer SEARCH BY TIME You can search for recording data in the DVR using the time range 1 Specify the time range to play 2 Click lt Play gt 3 Use the play bar to adjust the play direction and speed as necessary For more information about the play bar refer to Playback Screen Page 22 SEARCH BY EVENT You can search for recording data in the DVR by sorting them by the event 1 Select an event to search by clicking the checkbox 2 Specify the time range
116. this License For example you may not impose a license fee royalty or other charge for exercise of rights granted under this License and you may not initiate litigation including a cross claim or counterclaim in a lawsuit alleging that any patent claim is infringed by making using selling offering for sale or importing the Program or any portion of it 11 Patents A contributor is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based The work thus licensed is called the contributor s contributor version A contributor s essential patent claims are all patent claims owned or controlled by the contributor whether already acquired or hereafter acquired that would be infringed by some manner permitted by this License of making using or selling its contributor version but do not include claims that would be infringed only as a consequence of further modification of the contributor version For purposes of this definition control includes the right to grant patent sublicenses in a manner consistent with the requirements of this License Each contributor grants you a non exclusive worldwide royalty free patent license under the contributor s essential patent claims to make use sell offer for sale import and otherwise run modify and propagate the contents of its contributor version In the following three paragraphs a patent license
117. tion and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our de
118. tion of the setup 16_ connecting with other device getting started STARTING THE SYSTEM 1 Connect the power cable of the DVR to the wall outlet ST SUT ED gt la gt gt Be 2 You will see the initialization screen SAMSUNG LOG ON To make use of the DVR you must log on after the system started You must log on before you can use the features of the DVR 1 Select a user account that you want to log on with 2 Enter the password The default user is admin and password is 4321 PASSWORD H Aelis phi 7 poogggggggg p HOGoEE0O0Rm Life twin fofryalals BRORDORBRee5 ENTER CANCEL 3 i fi saali f pitti i DE a a Ca a i a ae T 5 OES pag aT a English _17 GALYVLS NILLIJ getting started LOG IN To access menu items of Logout System Setup Record Setup Backup and Search you must have logged in 1 If you try to access restricted menus the login dialog OOPS up 2 Select a user account enter the password and press the my lt ENTER gt button a p 2800000000 The default user is admin and password is 4321 ee ttt te ocoonononn The user who has a limited access to the menu will not be Binnie displayed in the user list 3 The menu screen to access appears LOG OFF If you do not use the system for an extended time please log out to restrict access from other users
119. to lt ON gt recording will proceed by overwriting the existing data even if the size of the recording data exceeds the HDD capacity If set to lt OFF gt and the HDD is full the DVR stops recording and sounds the buzzer or alarm that is set to operate in lt EVENT SENSOR Page 40 A message of DISK FULL is displayed on the screen e FORMAT Format the hard disk drive 1 Press the lt STARTS gt button You will see the alert that recording data can be deleted Press the lt OK gt button vy Note that formatting the HDD will delete all existing data DISK MANAGEMENT DISK MANAGEMENT 2 ee DISK MANAGEMENT DISK MANAGEMENT JET CANCEL APPLY CLOSE k 0 CAM DISK MANAGEMENT All recorded data will be removed Do you want to continue CANCEL 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu 44_ DVR setup RECORD SETUP You can configure the settings of record related options such as RECORDING OPERATIONS CONTINUOUS MOTION RECORDING ALARM RECORDING INSTANT RECORDING To start the RECORD SETUP 1 Press the MENU button on the remote control or click lt MENU gt button on the launcher menu The SETUP menu screen appears 2 Use the direction buttons to move to lt RECORD SETU
120. trol and mouse e BNC camera is supported e NISC Up to 120 frames Based on 352 x 240 PAL Up to 100 frames Based on 352 x 288 e Record and play in high quality NTSC Based on 704 x 480 PAL Based on 704 x 576 e High low speed search search list speed search e Continuous recording in HDD Overwrite mode 2 overview IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit Follow all the safety instructions listed below Keep these operating instructions handy for future reference Sos ee 2 YS CO 13 14 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety if the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs conven
121. tup If not using a router for network connection Static IP Setup Mode e Internet Connection Use ADSL or the dedicated line for the static IP or connect between DVR and remote users in the NETWORK LAN environment co e DVR Network Setup Check the network status of the on PARES connected DVR TEE For other options of IP gateway and subnet mask contact the RTSPSERVICEPORT 55 E WEB SERVER PORT 8080 n etwo rk administrator DDNS HOST NAME http ff00378 websamsung net 8080 MAX TX SPEED 8192 KBYTE Wid HELP CANCEL APPLY CLOSE p dNLAS YAA Dynamic IP DHCP Setup Mode e Internet Connection Connect the DVR directly to the cable modem to a DHCP based ADSL modem or to the optical LAN e DVR Network Setup Check the lt DHCP gt checkbox of the lt IP SETUP gt menu If using a router Connect the DVR to the IP router that is connected to the ADSL Cable modem or connect the DVR to the IP router in the LAN environment IZ For more information refer to Network Setup Guide that comes with the DVR Router DHCP IP Address Setup 1 To access the setup menu of the IP router provide the ean IP address of the router in the address bar of the Internet NETWORK browser on a local PC that is connected to the IP router ex htto 1 92 1
122. ture e To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions WARNING 1 Be sure to use only the standard adapter that is specified in the specification sheet Using any other adapter could cause fire electrical shock or damage to the product 2 Incorrectly connecting the power supply or replacing battery may cause explosion fire electric shock or damage to the product 3 Do not connect multiple cameras to a single adapter Exceeding the capacity may cause abnormal heat generation or fire 4 Securely plug the power cord into the power receptacle Insecure connection may cause fire 5 When installing the camera fasten it securely and firmly The fall of camera may cause personal injury 6 Do not place conductive objects e g screwdrivers coins metal parts etc or containers filled with water on top of the camera Doing so may cause personal injury due to fire electric shock or falling objects 7 Donot install the unit in humid dusty or sooty locations Doing so may cause fire or electric shock If any unusual smells or smoke come from the unit stop using the product In such case immediately disconnect the power source and contact the service center Continued use in such a condition may cause fire or electric shock 9 If this product fails to operate normally contact the nearest service center Never disassemble or modify this product in any
123. uct is transferred to the recipient in perpetuity or for a fixed term regardless of how the transaction is characterized the Corresponding Source conveyed under this section must be accompanied by the Installation Information But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product for example the work has been installed in ROM The requirement to provide Installation Information does not include a requirement to continue to provide support service warranty or updates for a work that has been modified or installed by the recipient or for the User Product in which it has been modified or installed Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network Corresponding Source conveyed and Installation Information provided in accord with this section must be in a format that is publicly documented and with an implementation available to the public in source code form and must require no special password or key for unpacking reading or copying 7 Additional Terms Additional permissions are terms that supplement the terms of this License by making exceptions from one or more of its conditions Additional permissions that are applicable to the entire Program shall be treated as though they were inc
124. up ALARM OUTPUT You can specify the alarming conditions and the operating time Using the mouse may help easy setup 1 Use the direction buttons to move to lt ALARM mm OUTPUT gt in the left corner of the EVENT SENSOR setup amp EVENT SENSOR screen and press the ENTER button SS P EOT P 2 Use direction buttons A lt P to move to a desired mE maar eso item and press the ENTER button to set the value Sein g e OPERATION Set the operation of the alarm output oo E MAIL f set to lt ENABLES gt the applicable menu is activated n where you can set other options If set to lt DISABLE gt other items will be disabled e MODE Set the output mode of the alarm f set to lt LATCHEDs gt the alarm will sound for as much time as defined in DURATION If set to lt TRANSPARENT gt the DURATION item will be disabled e DURATION Set the duration of the alarm output lf you select lt UNTIL KEY gt the buzzer will be stopped when you press any button on the front panel or the remote control e HDD EVENT Set to use the alarm output if the HDD is full e ALARM VIDEO LOSS MOTION Set the alarm output for each channel if an event of alarm video loss or motion detection occurs CANCEL APPLY CLOSE 3 When your settings are completed press the lt APPLY gt button on the
125. used when the DVR notifies with email You must use the mail server that supports Microsoft ve Outlook Enter the mail server using the virtual Keyboard Page 27 e PORT Enter the mail server port e SECURITY If set to lt ON gt your email will be sent in secure mode However the email will not be sent if the server you entered does not support SSL If set to lt OFF gt this will send emails of the server that does not support SSL e USER Enter the mail account ID of the sender e PASSWORD Enter the mail account password of the sender e FROM Provide the sender email that will be displayed in the email notice e TEST E MAIL Sends a test email to check if the current setting can send emails normally 3 When your settings are completed press the lt APPLY gt button on the bottom Your settings will be applied 4 Press the lt CLOSE gt button to display the confirmation dialog and return to the previous menu Network Connection and Settings According to the user network connection configure a proper network settings so as to change the settings of aremote DVR and to search and play the recording data via a local or external Internet connection IZ For more information refer to Network Setup Guide that comes with the DVR SAMSUNG SAMSUNG gt o a INTERNET IP Sharer Cable Modem Cable Modem External Remote PC Local PC DDNS Server websamsung net 38 DVR se
126. ve of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Correct disposal of batteries in this product Applicable in the European Union and other European countries with separate battery return systems This marking on the battery manual or packaging indicates that the batteries in this product should
127. way SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair 10 When cleaning do not spray water directly onto parts of the product Doing so may cause fire or electric shock 11 Do not expose the product to the direct airflow from an air conditioner Otherwise it may cause moisture condensation inside the Clear Dome due to temperature difference between internal and external of the dome camera 12 If you install this product in a low temp area such as inside a cold store you must seal up the wiring pipe with silicon so that the external air can not flow inside the housing Otherwise external high humid air may flow inside the housing pooling moisture or vapor inside the product due to a difference between internal and external temperature 4 overview CAUTION 1 Do not drop objects on the product or apply strong blows to it Keep away from a location subject to excessive vibration or magnetic interference 2 Do not install in a location subject to high temperature over 50 C low temperature below 10 F or high humidity Doing so may cause fire or electric shock 3 Ifyou want to relocate the already installed product be sure to turn off the power and then move or reinstall it 4 Remove the power plug from the outlet when there is a lighting storm Neglecting to do so may cause fire or damage to the product 5 Keep out of direct sunlight and heat radiation sources It may cause fire
128. without prior notice Warranty If the product does not operate properly in normal conditions please let us know Samsung Techwin will resolve the problem for free of charge The warranty period is 3 years However the followings are excluded e Data loss due to a damaged hard disk e f the system behaves abnormally because you run a program irrelevant to the system operation e Data loss due to virus infection e Deteriorated performance or natural worn out in process of time e Sensory phenomenon that does not affect the performance or quality of the product ex working noise SALES NETWORK SAMSUNG TECHWIN CO LTD samsungtechwin R amp D Center 701 Sampyeong dong Bundang gu Seongnam si Gyeonggi do Korea 463 400 TEL 82 70 7147 8740 60 FAX 82 31 8018 3745 SAMSUNG TECHWIN AMERICA Inc SAMSUNG TECHWIN EUROPE LTD 1480 Charles Willard St Carson CA 90746 UNITED STATES Samsung House 1000 Hillswood Drive Hillswood Business Park Tol Free 1 877 213 1222 FAX 1 310 632 2195 Chertsey Surrey UNITED KINGDOM KT16 OPS www samsungcctvusa com TEL 44 1932 45 5300 FAX 44 1932 45 5325 www samsungtechwin com www samsungsecurity com www samsungipolis com
129. xt channel J Click it to display the backup window where you can specify the search criteria and perform backup of any satisfied data You can check the backup data in BACKUP gt RESERVED DATA MANAGEMENT and save it to a USB storage media Returns to the previous screen For more information about the play bar refer to Playback Screen page 22 English _51 search amp olay SEARCH BY EVENT You can search for events and play data for a specific channel Using the mouse may help easy setup 1 Use the direction buttons to move to lt SEARCH BY EVENT gt in the left corner of the SEARCH screen and oress the ENTER button Er 2 3 2 Use the direction buttons AV lt gt to move to a desired P Jta scan a ra am item and press the ENTER button DATE TIME ie Specify the channel to search and the event period 3 Specify the search sequence e NEAREST Displays the list items with the most recent a ES one on the top ee PEU e FARTHEST Displays the list items with the oldest one on the top e PAGE LEFT Moves to the leftmost of the log list e PAGE RIGHT Moves to the rightmost of the log list 4 Use the direction buttons A Y lt gt to move to a search item or simply double click it The selected d
130. y Privacy Content Connections Programs Advanced Tools gt Internet Option gt Security Tab Uncheck Enable Protected Mode requires restarting Internet Explorer e i and restart Internet Explorer please wd e JV O Internet Localintranet eS Restricted sites bess This zone contains websites that you trust not to damage your computer or your files You have websites in this zone Security level for this zone Allowed levels for this zone All Most content is downloaded and run without prompts All active content can run Low Minimal safeguards and warning prompts are provided Appropriate for sites that you absolutely trust Enable Protected Mode requires restarting Internet Explorer Reset all zones to default level dAMGIA JM Switching between split modes Click the mode switch buttons to switch the screen mode as follows SINGLE 4 SPLIT To record video 1 Click lt H gt 2 The video of the selected channel will be saved in the default saving path of the PC IZ Click lt ActiveX Setting gt to display the Settings menu where you can change the default path To print the screen You can print out the Live screen that is currently displayed 1 Click lt f gt Printer 2 When the Print dialog appears click lt OK gt ine SEE Proper Status Ready Type AGFAAccuSet v52 3 Where LPT1 Comment Print to file r Print range Copies
131. you forget to check the codec it will not be backed up properly 3 Press the lt QUERY gt button The recorded data will be displayed in the backup information column 4 Check the data size in lt BACKUP INFO gt 5 To change the search criteria press the lt RELEASE gt button English _49 OackUO 6 Press the lt RESERVE gt or lt WRITE gt button on the bottom e RESERVE The selected data will be backup to the 4 HDD which you can check in lt RESERVED DATA a E me MANAGEMENT gt e WRITE Backs up the selected data to the connected storage device 7 Press lt CLOSE gt to exit the backup RESERVED DATA MANAGEMENT You can check the reserved data in lt NEW BACKUP gt and check delete or back up the data to a storage device 1 Use the direction buttons to move to lt RESERVED DATA MANAGEMENTS in the left corner of the BACKUP menu and press the ENTER button pmpscwupust a 2 Use the direction buttons A Y lt P to select a backup us even data item in the list INFORMATION DELETE WRITE CAMS 3 To check the data information press the lt INFORMATIONS gt button 4 Select lt DELETE gt if you want to delete data and select lt WRITE gt if you want to save the data 5 Press lt CLOSE gt to exit the backup

Samsung SRD-450 DVR User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents