Samsung 732NPLUS Flat Panel Television User Manual
Contents
1. Lock the door Can not lock the door after 4 times try Warning and stop running Ask the technician to repair Spin lopsidedly The judgement of un balance is above 1000g Spin low speed and cancel drying Disperse the clothings evenly in the tube Unclose the door The door is unclosed Warning Close the door The memory function is failure EEPROM goes wrong 14 Warning Ask the technician to repair 9 Keep the door slightly open when the wa shing machine is not being used Never cover the machine a plastic sheet 10 The tumble dryer should not be used if industraial chemicals have been used for cleaning 11 The appliance must not be installed behind a lockable door a sliding door or a door with a hinge on the opposite to that of the tumble dryer Installation As shown in Fig 1 remove all the packing materials in cluding the foam base It is normal that there are some water drops on the plastic bag the cushion and the porthole It is because of the water testing before leaving the factory Check attachments and materials N Operational Quality Water Drain Plastic ame w manual certificate hose holder plugs Remove the packing screws as shown in Fig 2 The packing bolts protect the appliance from impact damage during transportation Follow the steps below before using the appliance 1 Remove the rear panel of the wa2. The machine will carry out the standard program if there is no program to be selected Attention The machine has the memory function for the Habit program Reference loading Laundry loading Overalls Meine Evenly load the laundry in the ones 800g washing machine and then e hi Pajamas tightly close the door of the fabric clothes ie i 200g washing machine 800g Shirts x 3009 Notice a qi Rk eto cotton 300g blended fabrics 70g 1 When first using the washing machine let it run unloaded for one program to Jackets De a Socks q amp blended fabrics 50g cotton 800g prevent the laundry from being woon Single bed tainted by oil or dirty water from blankets 3000g sheets the washing machine cotton 800g 000 2 Do not overload the washing gt machine C DRY The sequence of the dry program as follow as each time the button is touched after the washing program is set Whole auto dry program The standard program for the individual dry At this moment you can select either 60 min or 30 min program You can not select dry function while you have already selected the heavy or delicate program Attention The maximal quantity of the laundry is 2 5Kg if the dry function is selected D DRAIN The different spinning speed can be selected by touching this button For details please see the program setting guide The spinning speed is 1000rpm 800rpm for night washing if the dry funct
3. is not selected L Door lock indicator This lamp is light when the door is locked and the machine is in the operation state and the door can not be opened If the condition for opening the door is met press the START PAUSE button this lamp is off and the door is unlocked and the door can be opened 10 M START PAUSE The set program is carried out while this button is pressed To pause the current program just press this button and the program will not operate at the moment Pressing this button again if you want to resume the operation The program can not be reset in the process of running or pause state Turning off the power and turning on it again if you want to reset programs Program selection Program and washing time name condition Default Defaut Range Default Default Renge pole eee spin Senda wash rinse ordinary cloths below 2 5 spin dry washing oe ap washing program wash rinse Habit jepinide according to the below 2 5 kg oie habit of the wash rinse t henii k spin dry oe 9 wash rinse spin below 5 ae 5 6 spin dr cloths wash rinse spin wash rinse Night Ispin dry for night washing below 2 5 kg aimee ta wash rinse Heavy wash rinse for thick or heavy below 5 kg 40 5 60 3 spin cloths Delicate wash rinse cashmere and below 2 kg as wool fabrics Standard Cry tne orinary below 2 5 kg laundries _ aundries anti virus process Attention The above list is just for you
4. the reset water level within 5 minutes Warning and stop running Check if the water pressure is low or stops supplying Water supply The water level can not reach the setting water level within 8 minutes Warning and stop running Check if the water pressure is low or stops supplying Drainage The water level can not reach the reset level in 8 minutes after drainage starting Warning and stop running Check if the water outlet of the drainage and adjust it and restart the machine 3 Never place heavy objects e g a heating appliance or water container on the top panel of the washing machine 4 Do not wash foam rubber or simalar sponge materials Water supply The water is above the warning level Warning and stop running Ask the technician to repair Motor The feedback signal do es not change in 8 minu tes during the motor runs Warning and stop running Ask the technician to repair Water level is abnormal in the drying process The water is ablove the setting water level during the drying process Warning and stop running Check if the water outlet of the drainage and adjust it and restart the machine Heater The water temperature unchanged in 10 minutes No heating and washing with cold water Ask the technician to repair Water tempera ture sensor The drying sensor circuit short cut or open Warning and stop running Ask t
5. Technica specifications Main power Max working current A Water pressure MPa Washing power W Spining power W Washing capcity Kg Spinning speed rom Drying power W size high depth width mm Weight Kg 220V 50HZ 10 0 05 lt P lt 1 300 1000 800 600 850 x 550 x 595 Operation Manual Haier Automatic Drum Washing Machine XQG50 S1016 Table of Contents Before using Names of parts inside front cover Matters needing attention 1 3 Installation 4 5 Control panel 6 Operational functions 6 7 During using Program selection 8 9 Preparations 10 Washing methods 11 Additional information 12 Maintenance Maintenance 13 Warning code 14 Trouble shooting 15 Warning 16 Wiring circuit 17 Technical specification Back cover Names of parts Electronic system diagram Detergent dispenser Table cover interference CNJ CNG CNH A1A2 A3 A4 A5 JA7 JA8 eliminator Close Controlling switch Driving Computer Board Computer Operation panel Board lo
6. afety gas keep children away from the washing ma chine Matters needing attention 8 The washing machine must not be used in the open or in an area of high humidity as water droplets may form on the electrical components Air dry the appliance if the washing machine components become wet 9 The washing machine should be placed in a well ventilated area leaving a space between the appliance and adjacent walls or furniture 10 Keep away from heat sources and direct sunlight to prevent plastic and rubber com ponents from ageing 11 During installation ensure that the electric cable is not trapped by the washing machine and damaged Dear customer For the machine and your own security DO NOTREPAIR IT BY YOUR SELF DO NOT USE THE WASHING MA CHINE WHICH SOME PARTS ARE LOST e Use 1 Make sure that the washing machine is securely connected to the water supply Take the necessary precautions or contact the lo cal service centre if the connection is poor or there is a water leak 2 Fasten the door handle before opening the door and then close the porthole Do not shut the door violently Trouble shooting The following circumstances do not constitute problems Do not contact the maintenance service until the problem has been confirmed The washing machine fails to operate The washing machine does not fill with water The water supply and drainage do not sto
7. can be canceled by turning off the power and restart it 11 Preparations Power supply Plug in the power supply 220V 50Hz Water supply Turn on the tap ensure that the water is clear Caution Before starting the washing machine turn on the water faucet to ensure that the water faucet and the water inlet hose are connected correctly and do not leak Operational functions Detergent selection The washing result depends on the quality of the detergent except the function performances of the washing machine There are many brands of detergent in the market For the best washing result we suggest you using the special on form detergent that produced for the auto drum washing machines For washing the wool and the chemi cal fibre please use the special deter gent for those materials Do not use dry clean dissolvent Attention Only put the quantity of the detergent in the cartridge for one time Wash load Laundry treatment E Sort out clothes according to type and extent of dirt There are three types of clothes cotton synthetical and woolen silk fabrics m Separeate white clothes from colored If whites and coloreds are combined for one load make sure the coloreds are coloreds are colorfast Remove all objects from pockets that may cause damage to the machine such as keys and coins a aa Clothing with frayed edges or yarns should be put in a wash bag or s
8. ck Washer door CND CNE CNFCN3 1 CN3 2 p Switch Glass porthole Power supply cable Drainage hose clip A heater1 B heater2 for drying C door engine Micro delay door switch D water inlet electromagnetic valve for pre washing G pump H drying fan motor sae als cies Se E water inlet electromagnetic valve for main washing __ water level sensor Drainage hose Back plate F water inlet electromagnetic valve for drying J water temprature sensor K drying temprature sensor Caution and warning symbols For your safety any instructions in this manual with this Warning sign must be followed strictly For your safety and to prevent damage to the washing machine any instructions in this manual with this Stop sign must be followed strictly This diagram may vary slightly with the layout of the washing machine you have just purchased due to technical inprovements 17 Warning 1 If the supply cord is damaged it must be replaced by a special cord or assembly available from the manufacturer or its service agent 2 If a stationary appliance is provided with a supply cord and a plug the instructions shall state that the appliance must be positioned so that the plug is accessible Note this requirement does not apply if the appliance incorporates other means for disconnection from the supply 3 For washing machines with ventilation opening in the base do not place directly on carpet as it will obstruct the openings 4 The i
9. e reused i ter inlet h t Adding the soften agent can help the laundry to get rid of the static electricity and e Place the water inlet hose nut on the connector et ene make the cloths feel softly and easy to iron of the water inlet valve R The following list shows the drying time for the different quantity and kinds of the Slightly shake the water inlet hose nut to see 9 gt laundry You can select the expected drying program in accord with the quantity if it is tightly and properly fixed and the drying degree The selected program will be over when the drying process is finished connector of water inlet valve Water drainage hose The height of the terminal of the water drainage hose should be between 80 100cm The water drainage hose must be securely placed on the clip on the back Drying degree of the washing machine Weight of laund Remain time G Time for drying Kg min 100cm Use the water drainage support supplied as an acce ssory for proper installation of the water drainage hose Fix the water drainage hose support with waterproof string Do not use an excessively long water drainage hose and contract the authorized technician if the water drainage hose needs to be extended The water drainage hose should not be extended more than 250cm longer extension will result in concurrent water inflow and outflow The diameter of the extension hose shou
10. he setting time of scheduled washing and heating temperature The screen only display the hour if the time setting is over 10 hour Il TEMP Children lock Touch this button to set washing temperature The temperature is changed cyclically each time the button is pressed For the highest temperature setting of each program please see the program setting guide The Delicate program there is no temperature setting function To lock button on the control panel by pressing this button for 3 second which including the POWER button These can be unlocked if thise button is pressed for another 3 second J PREWASH The prewash function can be added into the washing program K WATER LEVEL The related time and water level in the drum can be selected by pressing this button in accord to the laundry quantity The more bright the indicate light the more high the water level in the drum and the default washing time is longer with this height The quantity indicator changes its position accordingly each time the laundry quantity button is pressed We suggest using the first gear when the quantity is less than 1 Kg And using the second gear when the quantity is less than 2 5 Kg And using the last gear when the quantity more than 2 5 Kg All other program setting indicate the default values when the laundry quantity is set For each setting range please see the program setting for reference The default program will be carried out if the function
11. he technician to repair Water level sensor The water level sensor circuit short cut or open Warning and stop running Ask the technician to repair The temperature of air vent Within 30 minutes of dry phase there is 5 minutes in which the temperature is not increasing Warning and stop running Ask the technician to repair The dry tempe rature sensor The heater sensor circuit short cut or open Warning and stop running Ask the technician to repair Unlock the door Can not unlock after 4 times try Warning and stop running Ask the technician to repair 5 Before washing close zippers buttons laces and repair damaged areas Underwear and amall items should be palced in a laun dry bag or pillow slip Do not wash clothes containing wire frames 7 The door is fitted with a self locking device and can be opend when it is under the safety state water should be under the safe level temperature inside the drum should be less than 55 C the drum should do not run Do not open the door except above condition otherwise the self locking device will be damaged and the operator will get hurt 6 Do not open the detergent dispenser during the wash cycle Otherwise the water will spilt out from it and the detergent can not be wash ed out completely 8 After washing turn off the tap to prevent leaking unplug the washing machine and wipe clean the lower part of the porthole
12. ion is selected E RINSE Touch this button to select the rinsing time The time is changeable each time when it is touched and 6 times are the maxim F WASH Touch this button to select the washing time Increasing the washing period each time this button is pressed The increasing step is one minute for one press e Put detergent in the cartridge There are three partitions in the detergent cartridge Partition 1 It is used for the prewash function Partition 2 Put the detergent in this partition no matter whether the prewash function is selected or not Partition 3 Put the softening agent in this partition if the launry has gone through the soften process Caution 1 Do not add liquid degergent into partition 1 and partition 2 2 For prewashing program detergent should be added to both partition 1 and 2 for other programs do not add detergent to partition 1 3 Do not overuse softening agent as this may damage artificial fabrics e Washing program setting Set the washing program correctly in accordance with the laundry load First connect the mains and depress the power on off button the machine will work on the defaulted standard program Depress the program selection button for the required washing program Notice The above operation should be under the condition of no power down The ma chine will continue its previous program if the machine has the memory function after the power down The memory function
13. ld be the same as the original hose 0 1 Standard 1 2 5 ce Caution Water drainage hose must not be immersed in water The original and extension hoses should be tightly connected 60min 1 2 5 For ironing Connection of power supply Dry and Check the following items before connection to the power supply anti becterium program 0 2 5 30min 30 e The socket conforms to the maximum power load The maximum current load of the socket and power supply cable should not be less than 15A Power supply voltage conforms to the required value The power supply socket and the plug of the washing machine compatible if they are compatible refer to a washing machine technician or a designat ed service point for power cable replacement The washing machine should be connected to the earth before use 12 5 Control panel Standard START l m Habit PAUSE J Quick Night Standard Heavy lm BE 88 00 60min Delicate POWER SE To EA on Tine rom 30min ae J A A 7 7 PROGRAMME J A POWER ON OFF Touch this button to swith on the power if the machine is not on power and touch this button to switch off the power if the machine is on power Installation B PROGRAMME Touch this button then you can select the washing programs as you wish from top to bottom in proper order The backlight is bright while the program is selected
14. nstructions shall state that the appliance is to be connected to the water mains using new hose sets and that old sets should not be reused Note these instructions are not required if the hoses are permanently attached to the appliance 5 When connecting the washing machine for water supply and drainage make sure the plug is within reach 6 Keep the vent outlet at the bottom of the washing machine free from being blocked 7 To prevent danger damaged electrical cables must be replaced by the manufacturer or an authorised service agent 16 Matters needing attention e Safety 1 Aseparate earthed socket is required for the 2 Pull the plug and not the electric cable power supply After installation of the washing when unplugging the washing machine machine the power plug must be accessible during normal operation Bx MN O 3 Fuses in the power circuit should be rated for 4 For you safety dry your hands before tou 15A Contact a washing machine technician or ching the washing machine and wear appro a desiganted service point for power cable priate footwear replacement 5 Do not use flammable detergents or dry c 6 The door of the washing machine beco leaning agents do not use flammable sprays mes hot during the water heating or drying near the washing machine do not remove or process Avoid contact with the door during insert the plug in the presence of flammable the heating or drying process For s
15. nt blockages to the ff Ph water supply or the ingress of i contaminants clean the water y inlet and inlet water filter regularly i 1 r A F i a 5 Clean the filter once a month Press the lower edge of the filter compartment cover to open Fig 1 2 Remove the filter by turning counterclockwise Fig 3 Flash clean with running water Filter replacement is the reverse of removal Caution Attention shall be paid to ensure that the filter is replaced correctly to avoid possible leakage Using a flat nose screw driver prizes the slits of two ends of the button panel and move the panel out with your hands Fig 4 5 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 6 If the machine is to be moved a distance location replace the vibration mounting locks which were removed during installation as shown below a Remove the back cover Insert the channel steel vibration locks insert the bolts Replace the back cover Replace the rubber plugs Tighten the bolts with a spanner 7 Remove the power plug and turn off the tap and open the door if the machine is not going to be used for a long period of time With the method there would not be any bad smell inside the tube 13 Additional information Installation Connection of water inlet hose and washing machine Tips Using new hose set and old hose set should not b
16. p Drainage failure Strong vibration during spin drying Operation stops before com pletion of the wash cycle Excessive foam in the drum Failure of the drying process Incomplete drying Possible Cause e Poor connection to power supply e Power failure e Door is not closed properly e Machine has not been switched on e Water is not turned on e Water pressure is less than 0 05MPa e The inlet hose has a kink e Water supply failure e The door is not closed properly Check that the height of the water hose is within 80 100cm e Check that the drain hose is not syphoning e Drainage hose is blocked e Drainage hose end is more than 100cm above the floor level Check that all packing bolts have been removed e The washing machine is located on an uneven surface of is not level e Check that all foam packing has been removed from the motor e Water of electricity failure e The detergent is not a low foam type e Excessive detergent has been used e Poor connection to the power source e Door is not closed properly e Program has not been correctly set e Check to see if the end of the water drainage hose is submerged in water e The filter is blocked e The machine is overloaded e The water tap is not tured on 15 Warning code Abnorma item Content of identification Action to take Checking position and ask for help Matters needing attention The water level can not reach
17. pecial bag before washing Repaier damaged clothing lose buttons or damaged zips and hooks efore washing Bed sheet and table ware should be loosely loaded and not folded m This washing machine is for household use and designed for mechanically washable clothes When washing separate unwashable clothes with reference to clothes labels Type Mon tage Delicat fabrics Woolen fabrics Blending fabrics cottons Max load 5kg 2kg 1kg 2 5kg G DELAY Setting the finished time of the scheduled washing by touching this button The defaulted time for the scheduled washing is 9 hour The washing time can be increased one hour by one touching of the button If the button is pressed and held the time can be varied from 1 to 24 hour cyclically till the button is released If the START PAUSE button is pressed the current setting is confirmed after the scheduled washing program is ready If the time for the washing program is longer than the time of the scheduled washing then the program will work immediately after the START button is pressed Attention There are some different between the setting time and actual time because of the water temperature water pressure and the distributions of the laundry in the tube There is no scheduled washing function for Delicate program H Remaining time Min Digital display screen This display unit is used for warning the washing time left and fault information It can display t
18. r reference since the temperature water pressure and function you selected may verify for different laundry Program selection Program and washing time The methods The methods for using detergent using The methods for using detergent Total e aa Drain rpm Temp min of Partition2 Partition3 Hoon OONO me ere oe pene EIL ESERE omn weoneorion ois tensneneo 108 rae e x Oo nea IC OO owe Lo DL JOC CAESA EACE REE SESE o oma a aaa ve a a a fo KOE MCE SEICJESESES om f ow ejes o pe el Tepe sle Notice indicates that softener or bleach can be added if needed indicates that detergent must be added vy indicates that detergent must not be added oe ogoogo amp
19. shing machine 2 Remove the three packing bolts from the rear panel of the washing machine the rubber hose and then the shock ablorption steel channel 3 Refit the back plate 4 Fill the holes left by the packing bolts with plastic plugs Attention the packing bolts and rubber hose should be kept in a safe place for later use There is a plastic jacket packing the door catch please remove it when you unpack the machine Do not let children touch it to void dangerous things Adjusting the position of the washing machine The washing machine is provide with adjustable feet Before use adjust the feet until the appliance is level as shown in Fig 3 Maintenance 1 Remove the power plug open the porthole and turn off the tap after washing to avoid to produce damp and strange smell in the drum If the washing machine is not going to be used for a long period of time put the drainage hose as lower as possible to let the water in the pipe out for avoiding the water turns bad quality and then put the pipe to the original place 2 The dissolved agent and anti septics should not be used to clean the surface of the ma chine and rube apares Only the clothing soaked with some soap liquid is suggested Warning Remove the power socket before the cleaning 3 Clean the detergent cartridge regularly Pull the detergent cartridge up and out then wash it out Put it back when it is clean 4 To preve
Download Pdf Manuals
Related Search