Home

Samsung 720XT Computer Monitor User Manual

1. MENU LLU Opens the OSD menu Also use to exit the OSD menu or return to the previous menu W A These buttons allow you to adjust items in the menu Press this button to Activates a highlighted menu item SOO e AUTO When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center Control Buttons Direct Functions OSD Function 3 Direct Functions 3 AUTO vod MENU DI Jiv in SOURCE AUTO eo Menu Description When the AUTO button is pressed the Auto Adjustment screen appears as shown in the animated screen on the center The values of fine coarse and position are adjusted automatically To make the automatic adjustment function sharper execute the AUTO function while the AUTO PATTERN is on AUTO Available in analog Mode Only If auto adjustment does not work properly press AUTO button again to adjust picture with more accuracy If you change resolution in the control panel auto function will be executed automatically OSD Lock amp Unlock AUTO button E S 5 OU V7 i Ae As ERE ANO RA 7 MENU OO aw aie SOURCE AUTO eo 3 MENU button MENU DD wes in SOURCE AUTO o in Jj Menu Description This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings Lock Hold down the menu button for more than five 5 seconds
2. 3 Recover the System 3 Overview The XPe Client provides a recovery function which allows you to revert to a backed up system when encountering a serious problem You can back up an OS image which is working normally to USB memory or the PXE server You can revert to a backed up image when your client has one of these problems When a system file is deleted accidentally or is corrupted When the client computer is unstable or there is a problem with a device driver When problems occur after installing a new program or device When the client computer is infected with a virus When Windows XP Embedded fails to start 3 How to Recover the System A Recovery Using USB Memory By following these steps you can save all necessary files to USB memory and boot up with the backed up system on the USB memory and recover the system Perform system formatting for your USB memory in order to make it bootable Save the Windows XP Embedded image and the Backup Recovery Utility which will be recovered later to your USB memory Boot up with the USB memory Recover the system using the Windows XP Embedded image and the Backup Recovery Utility in the USB memory Recovery Using Network Booting This method is provided through the PXE Preboot eXecution Environment server The PXE sever provides a client server interface based on TCP IP DHCP and TFTP It allows an administrator at a remote location to configure and boot the operatin
3. Disable disk write protection and restart your computer This item is activated when the EWF is running If this item is selected the current states of the client Saved in a cache are saved to a flash volume and the EWF is disabled After restarting your computer the configurations and file system information for the client are written to a flash volume You can also perform this operation by entering ewfmgr exe c commitanddisable at the command prompt and restarting your computer Write the changes to a disk This item is activated when the EWF is running If this item is selected the current states of the client saved in a cache are saved to a flash volume However the state of EWF will not be changed You can also perform this operation by entering ewfmgr exe c commit at the command prompt You can view the configurations for the protected volumes by entering ewfmgr exe c at the command prompt In addition the EWF icon in the system tray shows the current state of the EWF w The EWF is enabled e The EWF is disabled Windows Media Player The XPe Client includes Windows Media Player 6 4 With Windows Media Player you can play audio and video files on a website What is Windows XP uu XPe Client Logon Embedded Desktop Programs X Control Panel Configuring Utilities Recover the System 3 Control Panel The Windows Firewall The Windows Firewall protect your client further The Windows Firew
4. Ltd SAMSUNG ELECTFIDIHICS wath respesct bo the SAMSUNG ELECTRONICS picduet elechionic documeriahon l SOFTWARE PRODUCT By installing g or using the SOFTWARE PRODUCT you agree lo be bourd by the emi of this EULA If you do not agree bo the bams ol the EULA you ay not install or wee the SOFTWARE PRODUCT 1 GRANT OF LICENSE This EULA grants pou the folowing nights Software Inclallsson and Usa SMSUNG ELECTRONICS grants you the nghi bo install and use the SOFTWARE PRODUCT on pour single computer running under a legalis acaumed operation sedem j a accept the benms of the bicense agreement ido not accept the Temm of the license agesemer 6 Choose a folder to install the MagicTune program Magic lune2 5 E Cllen it Piwot El shield wizard 2 caup PA riata h Instead Madgietumed amp Client Pirot bo C Program Fle 5ECMagitun23 5 Client Piwet Installed 7 Click Install Magiclune3 6 Cllent Pivot lnetalishield Wizard Ready bo Install the Program nF Pal ni edu d beg rm lal at Cr Click Install ba began the insballation H vau wasnt bo ewes cr change any of pour nstallshen selings click Back Click Cancel bo et the wield Install sied Magiclune3 6 Client Pivot lnetalishield Wizard Mag fi ines B Clie mk Final E CONG AT NGAY Sot bee inaia indai LC Progsm FlesssSELWIagietumed 56 Client Free ResSpa di Install sie 9 Click Finish Magiclune3 6 Client Pivot
5. Normal conditions are defined as continuously changing video patterns When the LCD panel is operated for a long time with a fixed pattern over 12 Hours there may be slight difference in voltage between electrodes that work the liquid crystal LC ina pixel The voltage difference between electrodes increases with time forcing the liquid crystal to lean When this occurs the previous image may be seen when the pattern is changed To prevent this the accumulated voltage difference must be decreased Common Electrode ITO Color Filter Data Gate Bus Line TFT Pixel Electrode Storage Capacitor ITO Cs Our LCD Monitor satisfies ISO13406 2 Pixel fault Class II
6. The ICA MetaFrame Server separates the application s internal logic from the user interface Due to this separation users only work with the user interface on the client The actual application is 10096 run on the server In addition running an application through ICA only uses approximately 1096 bandwidth compared to running it locally By using this feature of ICA users can do more work on the client than working locally The core technologies of ICA are as follows Thin Resource Low system requirements needed for running ICA a computer equipped with an Intel 286 processor and 640K RAM is sufficient This means ICA can be run on any computer that exists at present Thin Wire The default bandwidth required by ICA protocol is 20 kbps on average Therefore even with a Dial Up or ISDN connection a consistent performance is maintained Any program however large itis can be run stably at a low bandwidth Universal Application Client The Citrix ICA protocol separates the user interface from the application While an application is running on the WinFrame multi user application server its user interface is running on the thin client software of WinFrame Hence in any environment it is possible to run applications fast Platform Independent ICA is inherently being operated regardless of the operating system platform Because the clients for UNIX OS 2 Macintosh and Non DOS are already on the market you can run Windows applications
7. VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Vertical Frequency Like a fluorescent lamp the screen has to repeat the same image many times per second to display an image to the user The frequency of this repetition is called Vertical Frequency or Refresh Rate Unit Hz m Safety Precautions m Using Windows XPe m Introduction m Connections m Using the Software m Adjusting the Monitor m Troubleshooting amp Specifications m information O Information Contact SAMSUNG WORLDWIDE Terms For Better Display Authority 3 Contact SAMSUNG WORLD WIDE f you have any questions or comments relating to Samsung products please contact the SAMSUNG customer care center North America CANADA 1 800 SAMSUNG 7267864 http www samsung com ca MEXICO 01 800 SAMSUNG 7267864 http www samsung com mx U S A 1 800 SAMSUNG 7267864 http www samsung com Latin America ARGENTINE 0800 333 3733 http www samsung com ar BRAZIL 0800 124 421 http
8. lnetalishield Wizard Installs hold Wizard Complete The InstalfS held Wizard has mecaru nitaled Magictunes 6 Client Fivat Click UC EE Ma Ru Lt Cancel 10 When the installation is complete the MagicTune executable icon appears on your desktop MagicTune Double click the icon to start the program mu MagicTune execution icon may not appear depending on specification mace of computer system or monitor If that i Led Biss F5 Key PEPBPRRSRESEPETETETPBSBSERPPERESEPSBSBRESERPETPETPESSRSBREFESSESRSESETPETSTSRPEETBSRSETBERIEPRPERBRES Installation Problems The installation of MagicTune can be affected by such factors as the video card motherboard and the network environment See Troubleshooting if you have trouble during installation System Requirements OS Windows 98 SE Windows Me Windows 2000 Windows XP Home Edition Windows XP Professional HA i C It is recommended using MagicTune in Windows 2000 Srt a or later PRRSBPEBPERERESEPSETPETBSPBPRBRPERPEBRPETPSPBRBSRESEREPHETPBSESBHREFSRPRERSPETETPTBRRERBTBSSRSTSETERPERBES Hardware e 32MB Memory above e 25MB Hard disk space above For more information visit the MagicTune website Overview Installation OSD Modes Color Calibration Uninstall Troubleshooting ERTBEBHERBHGUTEBREBESSTZSHESNBSTBTBEBTUEBZESSTSBESEBTSBTERSBRSESEREBRBTBTBETEBRESTBTETHSSTSBPEBESBSESNESTS MagicTune allows for ras
9. memory to the USB port but they do not work The file list does not appear Solutions To use the network function approximately 30 seconds of booting time is required after turning the power on and a blank screen appears for 3 to 4 seconds during booting Please switch the mode about 30 seconds after the power is turned on 1 Check if the Hub port LED to which the LAN cable is connected blinks If not that indicates that the LAN connection is disconnected In this case connect using another LAN cable 2 Check if the settings of the Settings Network tab are properly set up The default setting is DHCP If your network uses a static IP address select Use the following IP address and then enter the appropriate IP address information 3 Check if the User Name and Password set in the Remote Desktop tab of Settings are the same as those of the host PC If not match the User Name and Password of the Remote Desktop with those of the host PC 1 Check if the Hub port LED to which the LAN cable is connected blinks If not that indicates that the LAN connection is disconnected In this case connect using another LAN cable 2 Check if the settings of the Network tab of Settings have been properly set up The default setting is DHCP If your network uses a static IP address select Use the following IP address and then enter the appropriate IP address information This is because the data is transmi
10. OSD Mode Color Calibration Uninstall Troubleshooting Overview What is MagicTune Monitor performance can vary due to the graphics card host computer lighting conditions and other environmental factors In order to get the best image on a monitor requires you to adjust it for your unique setting Unfortunately the manual controls available to tune the image often prove to be challenging Proper adjustment tuning requires an easy to use program that goes through a step by step process to obtain the best overall picture quality In most cases even simple adjustments to Brightness or Contrast require navigation of the multi level on screen display OSD menus that are not easy to understand Furthermore there is no feedback to assist in correctly setting the controls of the monitor MagicTuneT is a software utility that guides you through the tuning process with easy to understand instructions and back ground patterns designed for each monitor control The display settings for each user can be saved providing an easy way to select display characteristics in a multi user environme or having a single user have multiple defined presets based on content and ambient lighting Basic Functionality MagicTune is a software utility that allows monitor adjustment and color tuning using the Display Data Channel Command Interface DDC CI protocol All adjustments to the display are controlled via software to eliminate the need to u
11. Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly 3 Self Test Feature Check lk Turn off both your computer and the monitor Unplug the video cable from the back of the computer Turn on the monitor If the monitor is functioning properly you will see a box in the illustration below Check Signal Cable This box appears during normal operation if the video cable becomes disconnected or damaged Turn off your monitor and reconnect the video cable then turn on both your computer and the monitor If your monitor screen remains blank after using the previous procedure check your video controller and computer system your monitor is functioning properly 3 Warning Messages ul If there is something wrong with the input signal a message appears on the screen or the screen goes blank although the power indicator LED is still on The message may indicate that the monitor is out of scan range or that you need to check the signal cable Mot Optimum Mode Recommended Mode 1280 x 1024 60Hz 3 Environment si The location and the position of the monitor may influence the quality and other features of the monitor If there are any sub woofer speakers near the monitor unplug and relocate the woofer to another room Remove all electronic devices such as radios fans clocks and telephones that are within 3 feet one meter of the monito
12. What i Windows XP WPa Client Logon Embedded Desktop Programs Control Panel Configuring Utilities Recover the System 3 Logon 3 Logon When the client starts you can logon to the server by entering your username and password The default usernames already configured are Administrator and User and their passwords are a space 3 Auto Log On The client can log onto the server using a predefined account without the user information having to be manually entered every time Only an administrator that is only when you logged on as an administrator can specify the username password and domain for an account for which auto log on is activated At this time the password cannot be left empty Pi al xi E2 Terminal property SAMSUNG ile Help z Windows XP Embedded Client includes a feature that allows you to configure Ah the computer to autoatically logon bypassing the Winlogon dialog box n Auto Logon Automatic Logon UserName Administrator Password SSS Ha Pamain a E G Forced Automatic Logon After log off itis loged in automatically to appointed account If you want to logon as different user log off while holding down the C5hifb key This will cause the Logon to Windows dialog box to display What i Windows XP WPa Client Logon Embedded Desktop Programs Control Panel Configuring Utilities Recover the System 3 Windows XP Embedded D
13. adaptor video driver X f problems repeatedly occur contact an authorized service center il Q amp A Question How can change the frequency How can adjust the resolution How can set the Power Saving function How can clean the outer case LCD Panel Check List Q amp A Self Test Answer Frequency can be changed by reconfiguring the video card Note that video card support can vary depending on the version of the driver used Refer to the computer or the video card manual for details Windows XP Set the resolution at the Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the resolution at the Control Panel Display Settings Xx Contact the video card manufacturer for details Windows XP Set the resolution at the Control Panel gt Appearance and Themes Display Screen Saver Set the function at BIOS SETUP of the computer Windows ME 2000 Set the resolution at the Control Panel Display Screen Saver Set the function at BIOS SETUP of the computer Refer to Windows Computer Manual Disconnect the power cord and then clean the monitor with a soft cloth using either a cleaning solution or plain water Do not leave any remains of the detergent nor scratch the case Do not allow any water to go inside the monitor Check List Q amp A Self Test 3 Self Test Self Test Feature Check Warning Messages Environment Useful
14. back This may cause electric shock or fire Refer servicing to qualified service personnel G f your monitor does not operate normally in particular if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service This may cause electric shock or fire Keep the product away from places exposed to oil smoke or moisture do not install inside a vehicle This may cause a malfunction electric shock or fire Especially avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain If the monitor is dropped or the casing is damaged turn the monitor off and unplug the power cord Then contact the Service Center The monitor may malfunction causing an electric shock or fire Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time Failure to do so may cause an electric shock or fire Do not try to move the monitor by pulling only the wire or the signal cable This may cause a breakdown electric shock or fire due to damage to the cable Do not move the monitor right or left by pulling only the wire or the signal cable This may cause a breakdown electric shock or fire due to damage to the cable Do not cover the vents on the monitor cabinet Bad ventilation may cause a breakdown or fire Do not place water containers chemical products
15. cause any actions Picture Tab Definition Allows the user to adjust the screen settings to the desired values Makes the entire screen brighter or darker The detailed data of the images in the dark Brightness areas can be lost if the brightness is not adjusted to the proper level Adjust the brightness for best viewing conditions Adjusts the difference in brightness between the bright and dark areas on screen Contrast Determines the crispness of the images Resolution Lists all display resolutions supported by the program MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching Currently four different modes are available Text Internet Game Sport Movie and Custom Each mode has its own pre configured brightness value You can easily select one of six settings by simply pressing MagicBright control buttons Text For documentations or works involving heavy text Internet For working with a mixture of images such as text and graphics Game For watching motion pictures such as a Game Sport For watching motion pictures such as a Sport Movie For watching motion pictures such as a DVD or Video CD Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the Brightness and Contrast by using the OSD menu 7 Dynamic Contra
16. from product to product POWER IN port VGA IN port RS 232C Connection Terminal VGA OUT port Kensington Lock Cable Fix Ring Connect the power cord for your monitor to the power port on the back of the monitor Connect the signal cable to the 15 pin D sub port on the back of your monitor Connect a RS 232C cable to this terminal Connect a monitor to another monitor through a D Sub cable The Kensington lock is a device used to physically fix the system when using it in a public place X The locking device has to be purchased separately For using a locking device contact where you purchase it When connecting the cable is finished fix the cables to the Cable Fix Ring Q Earphone jack f1 Headphone connection terminal The Microphone Connect a microphone to the MIC terminal connection terminal MIC ec USB Connect USB devices such as a mouse keyboard and external storage USB Connection devices DSC MP3 external storage etc Terminal LAN Connect when using it as a monitor LAN Connection Terminal o AUDIO IN Connect the audio cable for your monitor to the audio port on the back of your computer See Connecting Cables for further information regarding cable connections X m Safety Precautions m Introduction m Connections m Using Windows XPe m Using the Software m Adjusting the Monitor B Troubleshooting E Specifications m information O Connections Connecting Cables Us
17. keyboard and external USB Connection Terminal storage devices DSC MP3 external storage etc You cannot use these devices without connecting to the host PC or switching to the MagicNet LAN Connect the LAN cable LAN Connection Terminal RS 232C Connection Connect a RS 232C cable to this terminal Terminal O D sub 15 pin port Use it by connecting it to another monitor VGA OUT The picture of the main monitor is displayed on the connected monitor Connecting Cables Using the Stand Using Other Stands 3 Using the Stand Tilt angle You can tilt the monitor screen forward to adjust the angle to a particular angle 3 Swivel stand You can easily adjust the position of the monitor screen from right to left using the rotating stand Rubber stubs are attached at the bottom of the monitor to help fix it to the installation location Connecting Cables Using the Stand Using Other Stands 3 Using Other Stands 3 Attaching a Base X This monitor accepts a 100 mm x 100 mm VESA compliant mounting interface pad SO os A Monitor O Mounting interface pad Sold separately Turn off your monitor and unplug its power cord Lay the LCD monitor face down on a flat surface with a cushion beneath it to protect the screen Remove four screws and then remove the stand from the LCD monitor Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with
18. off the Windows Firewall may make your client and network more vulnerable to viruses and intruders What is Windows XP mE XPe Client Logon Embedded Desktop Programs Control Panel Configuring Utilities Recover the System 3 Configuring Utilities Local Drive C Drive The C drive is used for the system If there is less than 3MB of free space available the client OS cannot operate Therefore always ensure that there is a sufficient amount of free space available EWF can help maintain available space by preventing the C drive being written to directly D Drive If the size of the flash memory is larger than 1 GB the D drive that is the flash memory is used as temporary file storage By specifying the folder path on drive D to frequently used system files you can manage the system drive effectively We recommend using this feature for temporary files such as the paging file temporary internet files and event logs files Saving Files Your client uses a fixed size of flash memory Therefore it is better to save files to the server rather than to your client 3 Mapping a Network Drive The administrator can map a folder to a network drive To keep the mapping information after restarting the client take note of these directions carefully Select the Reconnect at logon checkbox in the Map Network Drive dialog box f EWF is activated save the changes to the disk Installing MUI Multi language User Interface
19. on these operating systems The Citrix Program Neighborhood is a program that manages these ICA connections To start the Citrix Program Neighborhood select Start Programs gt Citrix MetaFrame Access Clients Program Neighborhood or double click the Citrix Program Neighborhood icon To create a new ICA connection double click the Add ICA Connection icon and follow these steps 1 F1 Citrix Program Neighborhood Custom ICA Connections File View Tools Help m QA Sm 9 Up Refresh Delete Properties Settings Views LI f objectis A Select the type of connection to create Add New ICA Connection x This wizard will help you set up a new Custom ICA Connection Select the type of connection you will use for the new Custom Applicators d Back Cancel Help 2 Type the connection name and the server name IP address or DNS name Add New ICA Connection X Enter a description for the new LA Connection M y ICA Select the network protocol that your computer will use to communicate with the server Farm TCP IP HTTP Select the MetaFrame Presentation Server computer or published application to which you want to connect Server Published Application 168 192 1 2 Server Location Back Cancel Help 3 Configure the degree of compression for the data to be sent and received and the degree of reliability for sessions Add New ICA Connection x
20. our home page for further reference An error may occur when your video graphic card is not in the Available list The latest or oldest video cards may not be compatible Please visit our homepage to see the Troubleshooting section An error may occur if the card maker has modified the video card driver or the graphics chip even when the video card is in the list 0 Please visit our homepage to see the Troubleshooting section Q Check if your monitor is manufactured by Samsung Products from other manufacturers may cause errors E Only Samsung products are able to support this feature Q An error may occur even when your monitor is manufactured by Samsung but is out of date Check if your monitor is able to support MagicTune M This feature is only supported by those monitors that are registered on our homepage j Check for the monitor before purchasing it as out of date models are not supported d An error occurs when no information on EDID Extended Display Identification Data exists for the current monitor This happens when from your desktop Start gt Setup Control Panel System Hardware Device Manager Monitor is selected the current Plug and play monitor is removed and new hardware is searched for but the system couldn t find any Plug and play monitor 0 Please visit our homepage to see the Troubleshooting section Q An error occurs when replacing the monitor with a new one when
21. screen to select and use one of the saved color values Preview docte Press Preview button on the Color Calibration The above picture will be shown 1 Press View Calibrated button to see the calibration effect which you adjusted 2 Press View Uncalibrated button to see the original image Overview Installation OSD Mode Color Calibration Uninstall Troubleshooting Uninstall The MagicTune program can be removed only by using the Add or Remove Programs option of the Windows Control Panel Perform the following steps remove MagicTune 1 Go to Task Tray Start Settings and select Control Panel in the menu If the program runs on Windows XP go to Control Panel in the Start menu 2 Click the Add or Remove Programs icon in Control Panel 3 In the Add or Remove Programs screen scroll down to find MagicTune Click on it to highlight it 4 Click the Change Remove button to remove the program 5 Click Yes to begin the uninstall process 6 Wait until the Uninstall Complete dialog box appears Visit the MagicTune website for technical support for MagicTune FAQs questions and answers and software upgrades Overview Installation OSD Mode Color Calibration Uninstall Troubleshooting Troubleshooting The current computing system is not compatible with MagicTune Please press OK and click on the Shortcut to the MagicTune site to view
22. the system power is off but the system has not been restarted 07 Please restart the system each time the monitor is replaced before using MagicTune An error occurs when the video card driver is not installed properly This happens when the current video card list is not displayed normally You can check this via Start Setup System Hardware Device Manager Display Adapter Visit the video card maker s homepage and download and install the latest driver For more information about the video card contact the card manufacturer CET EE EE NENG NGAGE EE EE SSS AG NG NG ET EE ENG NEGA ENGE EG NG NENE NET SERRE PRES To ensure normal operation please restart your system i An error occurs when the system is not restarted after installing MagicTune M This is for Win98SE and WinMe only Aly O Restart the system before use FPS P SPSS SSS PSSST SPSS SPSS STEPS RAE 2 For the best performance of MagicTune adjust to the optimal resolution Refer to the User Guide for the optimal resolution if you do not adjust to the optimal resolution and perform Color Calibration the monitor cannot be adjusted to the optimal condition g Refer to the manual for the optimal resolution CC EC EE 4 This video card does not support MagicTune Please install a new video card driver An error occurs when the video card driver is not installed properly This happens when the current video card list
23. this one minute period The message is displayed again if the system is rebooted The monitor is in PowerSaver mode Press a key on the keyboard to activate the monitor cannot see the On Screen Display The screen shows strange colors or just black and white The screen suddenly has become unbalanced The screen is out of focus or OSD cannot be adjusted LED is blinking but no images on the screen There are only 16 colors shown on the screen The screen colors have changed after changing the video card There is a message that reads Unrecognized monitor Plug amp Play VESA DDC monitor found on the monitor blinking at 1 second intervals Have you locked the On Screen Display OSD Menu to prevent changes Is the screen displaying only one color as if looking at the screen through a cellophane paper Have the screen colors become strange after running a program or due to a crash between applications Has the video card been set properly Have you changed the video card or the driver Have you adjusted the resolution or frequency to the monitor and restore the image on the screen If there is still no image press the SOURCE button Then press any key on the keyboard again to activate the monitor and restore the image on the screen Unlock the OSD by pressing the MENU LEH button for at least 5 seconds Check the signal cable connection Make s
24. to activate the OSD adjustment lock function OSD Lock 8 Unlock Unlock Hold down the menu button for more than five 5 seconds to deactivate the OSD adjustment lock function X Though the OSD adjustment lock function is prn us can still adjust the brightness and contrast and adjust MagicBright using the Direct button 3 MagicBright SA a m Um it AA pu ue Am SR um R3 D ies Leer MENU DLI wes Alo SOURCE AUTO o Menu Description Push the MagicBright button to circle through available preconfigured an MagicBright modes Six different modes Custom Text Internet Game Sport Movie 3 Volume MENU DIIT es aim SOURCE AUTO o Menu Description Volume When OSD is not on the screen push A Ub the button to adjust volume 3 SOURCE MENU TT Menu SOURCE 3 OSD Function lS Picture Brightness KS Color MagicColor lE Image Coarse NE OSD Language EHE Setup Image Reset EB Information ES Picture sik i SOURCE AUTO o tow F EG Description Selects the Video signal while the OSD is off Analog Client Control Buttons Direct Functions OSD Function Contrast Color Tone Color Control Gamma Fine Sharpness H Position V Position H Position V Position Transparency Display Time Color Reset MENU IT amv Aj SOURCE AUTO D Menu Description Play Stop You can use the on screen menus to change the brightness according to personal preferenc
25. www samsung com br CHILE 800 726 7864 SAMSUNG http www samsung com cl COSTA RICA 0 800 507 7267 http www samsung com latin ECUADOR 1 800 10 7267 http www samsung com latin EL SALVADOR 800 6225 http www samsung con latin GUATEMALA 1 800 299 0013 http www samsung com latin JAMAICA 1 800 234 7267 http www samsung con latin PANAMA 800 7267 http www samsung con latin PUERTO RICO 1 800 682 3180 http www samsung conv latin REP DOMINICA 1 800 751 2676 http www samsung com latin TRINIDAD amp TOBAGO 1 800 7267 864 http www samsung com latin VENEZUELA 1 800 100 5303 http www samsung com latin Europe BELGIUM CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ITALIA LUXEMBURG NETHERLANDS NORWAY POLAND PORTUGAL SLOVAKIA SPAIN SWEDEN U K CIS RUSSIA UKRAINE Asia Pacific AUSTRALIA CHINA HONG KONG INDIA INDONESIA JAPAN MALAYSIA PHILIPPINES SINGAPORE THAILAND TAIWAN 02 201 2418 844 000 844 38 322 887 09 693 79 554 08 25 08 65 65 0 15 min 01805 121213 0 12 Min 06 40 985 985 199 153 153 02 261 03 710 0900 20 200 88 0 10 Min 231 627 22 0 801 801 881 80 8 200 128 0850 123 989 902 10 11 30 08 585 367 87 0870 242 0303 8 800 200 0400 8 800 502 0000 1300 362 603 800 810 5858 010 6475 1880 2862 6001 3030 8282 1800 1100 11 0800 112 8888 0120 327 527 1800 88 9999 1800 10 SAMSUNG 7267864 1800 SAMSUNG 7267864 1800 29 3232 02 689
26. 3232 0800 329 999 http www samsung com be http www samsung com cz http www samsung com dk http www samsung com fi http www samsung com fr http www samsung de http www samsung com hu http www samsung com it http www samsung lu http www samsung com nl http www samsung com no http www samsung com pl http www samsung com pt http www samsung com sk http www samsung com es http www samsung com se http www samsung com uk http www samsung ru http www samsung com ur http www samsung com au http www samsung com cn http www samsung com hk http www samsung conv in http www samsung com id http www samsung com jp http www samsung com my http www samsung com ph http www samsung com sg http www samsung com th http www samsung com tw VIETNAM 1 800 588 889 http www samsung com vn Middle East amp Africa SOUTH AFRICA 0860 7267864 SAMSUNG http www samsung com za U A E 800SAMSUNG 7267864 http www samsung com mea Contact SAMSUNG WORLDWIDE Terms For Better Display Authority 3 Terms Dot Pitch The image on a monitor is composed of red green and blue dots The closer the dots the higher the resolution The distance between two dots of the same color is called the Dot Pitch Unit mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user The frequency of this repetition p
27. SyncMaster 720XT OFF rr re Connectio IFFFFFF SOGO GG E ncMaster cass gt EB E EEES P hk Mus 3 bh P i NG 3 Install drivers Install programs bb My Windows bb W Natural Color bb Mete MagicTune es _ Cc m Safety Precautions m Introduction m Connections m Using Windows XPe m Using the Software m Adjusting the Monitor m Troubleshooting amp Specifications m information O Safety Precautions Notation Power Installation Cleaning and Use Others 3 Notation Please read the following safety instructions as they are designed to prevent damage to property and harm to the user Ka Warning Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment EB Notational Conventions G Prohibited j OK Do not disassemble Q Do not touch Important to read and understand at all times Disconnect the plug from the outlet Grounding to prevent an electric shock Gace Notation Power Installation Cleaning and Use Others 3 Power When not used for extended period of time set your computer to DPMS If using a screen saver set it to active screen mode Shortcut to Anti Afterimage Instructions Do not use a damaged or loose plug This may cause electric shock or fire Do not pull the plug out by the wire nor touch the plug with wet hands This may cause e
28. The MUI Setup program helps you set up languages on the XPe client In addition you can delete an original language pack to extend the available free disk space If you want to change the default language standards or formats use the Regional Options in the Control Panel To add a language to your XPe client follow these steps Logon as an administrator f EWF is activated you must deactivate it before starting the installation Click Start and click Run Type muisetup exe in the Open box and click OK A list of languages that can be installed is displayed as shown below Select the language you want to install and click Install from the File menu The installation will begin Multilingual User Interface Pack SAMSUNG Xx File Help Install languages Select the languages you want to install on the system for menus and dialogs Geman French Italian Swedish Spanish Mate Using Regional and Language Options in Control Panel you can change the user interface default keyboard locale and standards and formats IF deleting the language source file will be removed and returning the disk free space You can delete an original language pack using the Delete menu in the File menu This operation deletes the original language pack only and does not delete the copy installed on your XPe Client What is Windows XP mE XPe Client Logon Embedded Desktop Programs Control Panel Configuring Utilities Recover the System
29. X Select the desired encryption level and whether or not to use session reliability for this connection Encryption Level Use Default Basic Session reliability v Enable 4 To login to the server automatically enter your username password and domain If you do not enter them now you will be prompted to enter them whenever you connect to the server Add New ICA Connection E 3 x Enter a User name Password and Domain to use with this Connection Ifyou leave these fields blank you will be prompted for this information when you connect User name Password aaa Domain Save password PO Use local Username and Password 5 You can specify the color and size of the window to be displayed Add New ICA Connection B X This application you are connecting to is configured with default display options If you would like to override these defaults you can do so below window Colors I Use Default 256 Colors T Window Size v Use Default 640x 480 Cancel Help 6 If a connection succeeds the server s desktop appears on the client In this step you can make an application run automatically Add New ICA Connection x Enter the filename of the application to run or leave this bos empty to run a remote desktop Application Browse T ou may also specify a working directory if desired working Directory 7 Click Fini
30. You can change the vertical position where the OSD menu appears on your monitor MENU sa gt 4 gt a FO 4 F MENU Change the transparency of the background of the OSD MENU a gt Ea gt 4 gt A F gt MENU The menu will be automatically turned off if no adjustments are made for a certain time period You can set the amount of time the menu will wait before it is turned off 5 Sec 10 Sec 20 Sec 200 Sec MENU sa gt Ea Sa T5 MENU Play Stop MENU DD wes ais SOURCE AUTO eo Menu Description Play Stop Image parameters are replaced with the factory default values Image Reset Hi Q Q MENU a F gt 3 gt 2 gt gt MENU Color parameters are replaced with the factory default val Color Reset ace Q Q MENU gt A FT gt H gt A gt 4 A Y MENU NN Information si MENU DD ah amp w Alo C SOURCE AUTO eo Menu Description Shows a video source display mode on the OSD screen Information MENU 4 Y m Safety Precautions m Adjusting the Monitor m Introduction m Troubleshooting B Connections a Specifications m Using Windows XPe m Using the Software m Information O Troubleshooting 3 CheckList Check List Q amp A Self Test Before calling for service check the information in this section to see if you can remedy any problems yourself If you do need assistance please call the phone number on the Informa
31. Your Computer as the Host You must enable the Remote Desktop feature to control it from another computer You must be logged on as an administrator or a member of the Administrators group to enable Remote Desktop on your computer Follow these steps Open the System folder in the Control Panel Click Start point to Settings click Control Panel and then double click the System icon On the Remote tab select the Allow users to connect remotely to this computer checkbox Ensure that you have the proper permissions to connect to your computer remotely and click OK Leave your computer running and connected to the client s network with Internet access System Properties E xl A Select the ways that this computer can be used from another location Remote Assistance Allow Remote Assistance invitations to be sent from this computer Advanced What is Remote Assistance Remote Desktop v Allow users to connect remotely to this computer Full computer name LIEM BRE 228854P 5 What is Remote Desktop Select Remote Users For users to connect remotely to this computer the user account must have a password Windows Firewall will be configured to allow Remote Desktop connections to this computer cancel Aly Start a Remote Desktop Session on the Client Once you have enabled your host computer to allow remote connections and installed the client software on a Windows based client computer you are
32. accurate tuning of the n with the 3 ability to sey save and use monitor configurations that are best suited for you e OSD mode may appear inconsistent with the explanation in guidance book depending on specification of each monitor e When Pivot is functioning part of MagicTune Program may not operate normally non e AutoRotation AutoRotation will automatically pivots the monitor to 0 90 180degrees when you pivots the monitor To execute Rotation it should be done as below e Please install both of Rotation program and MagicTune 3 6 in your PC e Launch MagicTune M 3 6 e Option Preference click the small box as V in enable task tray menu e dpi caramel control mode will be different according to monitor models EE FOFEPEFE EE SESS PAPER NE SESE SSSHSERS ESSERE ESS OSD Mode The OSD mode makes the adjustment of settings on all monitors easy When selected each tab on top of the control window displays the general descriptions of the sub menu items for adjustment When selected each tab displays a list of menus For quick adjustment of the monitor settings the OSD mode allows easy and convenient access to all tabs and sub menu items Button Tab Definition OK Applies any changes made and exits MagicTune Reset Restores the display settings to the factory settings Cancel Exits MagicTune without applying the changes made If you have not made any changes in the control window clicking Cancel does not
33. agicZone Brightness This function is to adjust the brightness of the MagicZone Sharpness This function is to adjust the sharpness of the MagicZone H Position This function is to move the MagicZone horizontally V Position This function is to move the MagicZone vertically H Size This function is to adjust the horizontal size of the MagicZone k V Size This function is to adjust the vertical size of the MagicZone The tone of the color can be changed and one of four modes can be selected Cool Normal Warm and Custom Not available in MagicColor mode of Full and Intelligent MENU gt 4 F gt H gt a F gt H gt A MENU Adjusts individual Red Green Blue color balance Red Green Blue Not available in MagicColor mode of Full and Intelligent MENU gt 4 gt H gt F gt H gt a F gt lH a F gt MENU Gamma correction changes the luminance of the colors with intermediate luminance Mode 1 Mode 2 Mode 3 MENU gt amp gt H gt a FO LH gt TS MENU Play Stop 29 MagicZone ee Hue 29 Saturation Brightness 29 Sharpness BQ H Position V Position H Size V Size 29 SQ ee 29 Menu Coarse Fine Sharpness H Position V Position OH OSD ub a dom SR um d MENU OO ahi w aim SOURCE AUTO eo ST Er JF Not available in MagicColor mode of Full and Intelligent Description Removes nois
34. all allows you to restrict incoming data to your client from other computers thus helping to control your client data more effectively In addition it also provides a barrier between your client and network connections reducing unauthorized access viruses and worms across networks You can think of a firewall as a sentinel which identifies incoming data from the Internet and other networks According to the firewall settings incoming data to your computer is either permitted or rejected The Windows Firewall is by default installed and activated on your client However your administrator can turn it off You can choose and select a different firewall Therefore it is not required for you to use the Windows Firewall Estimate the functions of other firewalls and choose the best one to fit your requirements To install and run a different firewall you must turn off the Windows Firewall You must be logged on as administrator to turn the Windows Firewall on or off Follow these steps to turn the Windows Firewall on or off 1 Run the Windows Firewall 2 Click on one of these options under the General tab o On recommended This is the recommended setting for normal use o On with no exceptions This settings blocks all unwanted access to your client including all requests to programs and services selected in the Exceptions tab Use this setting when you need to protect your client to the maximum extent o Off Not recommended Turning
35. art to intall he manitor P AADEON SSS Plug and PinyMortor Select the marda shidh yeu vest bo ingtali If you can see following message window then click the Continue Anyway button Then click OK button Microsoft Windows9 XP 2000 Operating System Hardware Installation The software you are installing for this hardware This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Monitor driver installation is completed Installing the Monitor Driver Manual Windows XP Windows 2000 Windows ME Windows NT Linux O Microsoft Windows XP Operating System ai Insert CD into the CD ROM drive Click Start Control Panel then click the Appearance and Themes icon park eco d Pa Das T y Ereren p Py rar ae at Br mr rem Cowphka er e Ee Piy Bermek escent F he Ewell Chatlc cd Csi prime 7 KS Pe ie bere HET PO E gt Pete eee rio Pene foc r Tor tor Larger cm Bryan Dalawa THIS amp Click Display icon and choose the Settin gs tab then click Advanced Pingel a peer LAOS Em DF ee Feo be ie Qu Q d gem T Paba Dingess Pisy mej Paga Pert curs IG Pet dil Banana y Eire pisiy More o Migra 32 boc T024 by 753 paola CC oa OE ER Cia rH Click the Prope
36. as set FEF SESS SSS SSCS SSS S SSCS SSS SSS SSS SSS SPP SPSS CSCC ETE ES EE Contrast will not be adjustable in MagicColor mode of Full and Intelligent e MagicTune will be disappear if you excute MagicZone and closing the MagicZone after adjusting will show the MagicTune HAHAH again abet System Tray is Unhecked MagicTune will be disappear if you excute MagicZone and closing the MagicZone after adjusting will not show MagicTune again System Tray is Checked e MagicColor mode will be different according to monitor models MagicZone mode will show if the monitor supports the function EHBEBSEBEGERSERSHREBREBEBSSBAESHSRZSRSZBRERBRRSNSERZBZBZSGSGSSG BEBHZGNHESBEBZEBSBSSSSNENENE Gamma correction changes the luminance of the colors with intermediate luminance Gamma FSP F SSS PSPSPS SPSS PSPS SSS SSS SS SSeS PSPS SSeS EST SS PPPS SSS S ETP ES EF ee Gamma mode will be different according to monitor models Some monitor will only support Three modes Mode1 Mode2 Mode3 TEO aaa dicte Image Tab Definition Adjusts the Fine Coarse and Position values Image Setup Position Sharpness e Fine Removes noise such as horizontal stripes If the noise persists even after Fine tuning repeat it after adjusting the frequency clock speed e Coarse Removes noise such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the Horizontal Cont
37. ast a five minute break after every hour of using the monitor Do not install the product on an unstable uneven surface or a location prone to vibrations Dropping the product may cause damage to the product or the person carrying it Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire When moving the monitor turn off and unplug the power cord Make sure that all cables including the antenna cable and cables connected to other devices are disconnected before moving the monitor Failure to disconnect a cable may damage it and lead to fire or an electric shock Place the product out of children s reach as they could damage it by hanging onto it A falling product may cause injury to the person or even fatality When not using the product for an extended time period keep the product unplugged Otherwise this may cause heat emission from the accumulated dirt or degraded insulation leading to electric shock or fire Do not place children s favorite objects or anything else that may be tempting on the product Children may try to climb on the product to retrieve an object The product could fall causing physical damage or even death e Keep your back straight e Keep a distance of about 45 50 cm between your eyes and the monitor screen Look at the screen from slightly above it and have the monitor directly in front of you e Tilt the mon
38. ations Ex Airports Transit Stations Stock Markets Banks and Controlling Systems We recommend that you follow set up of your display system program as below Display Information together with Logo or Moving image cycle Ex Cycle Display Information for 1 hour followed by a Display Logo or moving image for 1 minute Change the Color Information periodically Use 2 different colors Ex Rotate the Color Information with 2 colors every 30 Minutes Type 1 Type 1 FLGHT TIME FLGHT TIME gt BEL 20 30 UA102 21 10 02348 20 30 UAT102 21 10 Avoid using a combination of characters and background color with large difference in luminance Avoid using Grey colors which can cause Image retention easily e Avoid Colors with big difference in luminance Black amp White Grey Ex SYSTEM 245 e Recommended settings Bright colors with little difference in luminance Change the characters color and background color every 30 Minutes Ex SYSTEM 245 Jf SYSTEM 245 STATUS OK STATUS OK Every 30 Minutes change the characters with movement Area Lt Lt rms IF AAP KA1710 12 00 KATJ30 35 00 UA0110 13 30 FA7711 14 15 LIAN11N 12 2 AA0002 14 00 FA7777 14 15 2 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it Image retention may not occur when a LCD panel is operated under normal conditions
39. ay cause damage to the product or the person carrying it Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf Dropping the product may cause damage to the product or the person carrying it Do not place the product on an unstable or small surface area Place the product on an even stable surface as the product may fall and cause harm to someone walking by specifically children Do not place the product on the floor Take care as someone specifically children may trip over it Keep any flammable objects such as candles insecticides or cigarettes away from the product Otherwise this may cause fire Keep any heating devices away from the power cable A melted coating may cause electric shock or fire Do not install the product in places with poor ventilation for instance a bookshelf closet etc Any increase in internal temperature may cause fire Set down the monitor carefully The monitor could be damaged or broken 3 Do not place the monitor face down This may damage the TFT LCD surface Installing a wall bracket must be done by a qualified professional Installation by unqualified personnel may result in injury Always use the mounting device specified in the owner s manual When installing the product make sure to keep it away from the wall more than 10 cm 4 inch for ventilation purposes Poo
40. ce command set FAT File Allocation Table System Exception Some manufacturers have wrongly specified their device to be USB standard compatible Our product has exception handling procedures But Some devices are unlikely to work properly Some manufacturers have wrongly specified their device to be SCSI compatible Such devices are unlikely to work properly It is recommended that USB devices are purchased after they are tested and confirmed to be compatible Specifications PowerSaver Preset Timing Modes 3 PowerSaver 3 PowerSaver When used as a normal monitor This monitor has a built in power management system called PowerSaver This system saves energy by switching your monitor into a low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer Use a software utility installed on your computer to set up this feature Power off State Normal Operation Power button Power saving mode Power Indicator Green Green Blinking Black Power Consumption Less than 70 W Less than 4 W Less than 4 W 3 PowerSaver When used as a Network monitor This monitor has a built in power management system called PowerSav
41. ct access to a flash volume If EWF is activated data is not stored to the flash The data stored in the cache is only effective while the client is operating The cached data will be lost when restarting or shutting down your client Therefore to store the data written to the registry favorites and cookie folders etc the content stored in the cache should be transferred to the flash An error message is displayed when it is not possible to write to the cache due to a lack of memory If this message is displayed you have to deactivate EWF to flush the EWF cache The user can double click the EWF icon on the tray at the bottom right of the screen to call the EWF Manager A user can also change the EWF configuration by entering EWF management commands at the command prompt This task requires the administrator privilege a EWF Configuration d x Li EWF State Enabled Boot Command Used Memory 9426 KE Command C Enable wite tilterand restart the unit C Disable write filter and restart the unit Commit changes to disk Enable disk write protection and restart your computer If the EWF is disabled enable it If this item is selected the cache is flushed and the EWF is enabled After restarting your computer the configurations and file system information for the client are written to a cache You can also perform this operation by entering ewfmgr exe c enable at the command prompt and restarting your computer
42. drreer po choco vell ba the bett mach for your haaa Plug and Play Monitor Proper iire we Dh Dewse ippa Hara Shee bocsika Dai dais Meondces iangan manto types on 3D Propet IH Thee clone is marh pacqueche It wn pecblerms wth Iha diaca click Ticubleshact la Mee he beet ms Pawis umga iiaa iha davica janahla then click Next button Hardware Update Wizard Welcome to the Hardware Update Wizard This wines helpen pou install solbware lor Plug arxd Play Mordor If pow harden come with an mtslistion CD ir Dopo diak inert il miw ufhat do pou waned Hee wiad lo do CO mil the amihan autoravically Recommended ick Het lo continue then click Next and then click Have disk Har taara Update Wizard Tolles the devine diver pou wont bo install ba this haitaina E Selaci tha rues aeter arel model of pour hatian desvace i kaa ia e have a dk Pat Gia a o pe ark io Pad ci res Duk Click the Browse button then choose A D Driver and choose your monitor model in the model list and click the Next button Install From Disk deest the manufacturer s metalation dik and then make sure thal the conect dire i selected below Copy manul achurer s fles home Hardware Update Wirard Helsti the device chives eeu wami be ansball for then harderann Salad the mamukhaan ared rrescel ol vous hanfesaie dence are eet click Head P pete haa dak thal Ganang Hus diese
43. e Brightness Direct Access Feature When OSD is not on the screen Q Q push the button to adjust brightness MENU gt 4 gt gt 4 Y gt MENU You can use the on screen menus to change the contrast according to personal preference Contrast Not available in MagicColor mode of Full and Intelligent ole MENU gt H gt 4 2 gt gt MENU o Color ik MO HACK ee A S UD R3 X MENU SOD ah afm SOURCE AUTO iy a ar Menu MagicColor Color Tone Color Control Gamma O Image lk Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality O Off Returns to the original mode Demo The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left Full Displays not only vivid natural color but also more realistic natural skin color with clearness Intelligent Displays vivid natural color with clearness MagicZone The MagicZone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness sharpness saturation hue of a certain area on the screen Especially MagicZone is appropriate to using the moving picture Hue This function is to adjust the hue of the MagicZone Saturation This function is to adjust the saturation of the M
44. e such as vertical stripes Coarse adjustment may move the screen image area You may relocate it to the center using the horizontal control menu Available in analog Mode Only MENU 4 gt 3 gt 2 gt T5 MENU Hemoves noise such as horizontal stripes If the noise persists even after fine tuning repeat it after adjusting the frequency clock speed Available in analog Mode Only MENU gt 4 2 gt 4 gt 4 Sa F gt MENU Changes the clearance of image Available in analog Mode Only MENU a F gt Ea tS gt 4 Y MENU Changes the horizontal position of the monitor s entire display Available in analog Mode Only MENU sa Ko H gt a FL a MENU Changes the vertical position of the monitor s entire display Available in analog Mode Only MENU sa gt El a 5 gt F gt MENU Play Stop Menu Language H Position V Position Transparency Display Time HE Setup sm AA CT TITA MENU OD Mv Al SOURCE AUTO Description You can choose one of eight languages English Deutsch Espa ol Francais Italiano Svenska PyYCCKMH Portugu s The language chosen affects only the language of the OSD It has no effect on any software running on the computer MENU gt A gt x gt Sg Y gt MENU You can change the horizontal position where the OSD menu appears on your monitor MENU sa gt a Sa MENU
45. epartment Write down the department Location Write down the location Version Displays the version of MagicTune M Overview Installation OSD Mode Color Calibration Uninstall Troubleshooting Color Calibration docte Color Calibration Color Calibration guides you to get optimal color condition for your monitor Proceed following 5steps for getting optimal monitor color condition 1 Control Brightness control bar for matching the brightness of control patch and the brightness of background pattern 2 When you detect specific color tone on Control patch move the control cursor toward to the direction of the color tone referring to Color reference Circle Adjustment is finished properly you won t detect any color tone on Control patch 3 When you finish adjustment for step1 Click Next button 4 Repeat 1 2 3 procedures for remaining step2 step5 5 You can easily view the calibration effect through clicking Preview button How multiple users can use adjusted color values Definition When monitor is used by multiple users color values which are adjusted via Color calibration for each users can be saved and used Up to 5 users can use the saved color values 1 How to save adjusted color values Press Next to make it change into Apply and then you can save adjusted color values As many as 5 values can be saved 2 How to apply the saved color values Press Multi User button on main
46. er This system saves energy by switching your monitor into a low power mode when it has not been used for a certain amount of time The monitor automatically returns to normal operation when you press a key on the keyboard For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer Use a software utility installed on your computer to set up this feature Power off State Normal Operation Power saving mode Power button Power Indicator Green Black Black Power Consumption Less than 70 W Less than 40 W Less than 4 W 3 Preset Timing Modes Specifications PowerSaver Preset Timing Modes Ifthe signal transferred from the computer is the same as the following Preset Timing Modes the screen will be adjusted automatically However if the signal differs the screen may go blank while the power LED is on Refer to the video card manual and adjust the screen as follows 3 Preset Timing Modes Display Mode E EU E p Ed i ud KHz Hz IBM 640 x 350 31 469 70 086 25 175 IBM 640 x 480 31 469 59 940 25 175 IBM 720 x 400 31 469 70 087 28 322 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 74 551 57 284 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000
47. er second is called Vertical Frequency or Refresh Rate Unit Hz Example If the same light repeats itself 60 times per second this is regarded as 60 Hz Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle The inverse number of the Horizontal Cycle is called Horizontal Frequency Unit kHz Interlace and Non Interlace Methods Showing the horizontal lines of the screen from the top to the bottom in order is called the Non Interlace method while showing odd lines and then even lines in turn is called the Interlace method The Non Interlace method is used for the majority of monitors to ensure a clear image The Interlace method is the same as that used in TVs 3 Plug amp Play D This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically This monitor follows the international standard VESA DDC for the Plug amp Play function Resolution The number of horizontal and vertical dots used to compose the screen image is called resolution This number shows the accuracy of the display High resolution is good for performing multiple tasks as more image information can be shown on the screen Example lf the resolution is 1280 x 1024 this means the screen is composed of 1280 horizontal dots horizontal resolution and 1024 vertical lines vertical res
48. esktop 3 User When a user logs in the User Desktop appears as shown in the figure below The default icons that appear on the User Desktop are Citrix Program Neighborhood Remote Desktop Connection and Internet Explorer You can also run this connection from the Start menu The audio volume icon VNC server icon and system time are displayed on the User Taskbar When logged on as a user there are many restrictions that protect the system from incorrent user actions You cannot access the system drives and there are restrictions on configuring properties for them To configure the client s advanced and detailed settings log on as an administrator 3 Administrator If you logon as Administrator the Administrator Desktop appears as shown in the figure below The default icons that appear on the Administrator Desktop are My Computer My Network Places Citrix Program Neighborhood Remote Desktop Connection Internet Explorer and Recycle Bin You can also run the Citrix Program Neighborhood Remote Desktop Connection and Internet Explorer from the Start menu The audio volume icon VNC server icon Enhanced Write Filter status icon and system time are displayed on the Administrator Taskbar The Administrator privilege is required for adding and removing programs 3 Log off Restart Shut down To log off the current session shut down or restart your client use the Start menu Click Start gt Shut down The Shut Down Windows dialog box i
49. g system onto a client over a network Implement a PXE server Save the Windows XP Embedded image and the Backup Recovery Utility which will be recovered later onto the PXE server Boot the client via the network Recover the system using the Windows XP Embedded image and the Backup Recovery Utility saved on the PXE server via the network For more information refer to the PXE Server User Manual a m Safety Precautions m Introduction m Connections m Using Windows XPe m Using the Software m Adjusting the Monitor m Troubleshooting amp Specifications m information O Using the Software Monitor Driver Natural Color MagicTune 3 Monitor Driver When prompted by the operating system for the monitor driver insert the CD ROM included with this monitor Driver installation is slightly different from one operating system to another Follow the directions appropriate for the operating system you have Prepare a blank disk and download the driver program file at the Internet web site shown here Internet web site http www samsung com Worldwide http www samsung com monitor U S A http www sec co kr monitor Korea http www samsungmonitor com cn China 3 Installing the Monitor Driver Automatic DO Insert CD into the CD ROM drive amp Click Windows amp Choose your monitor model in the model list then click the OK button on SAMSUAGS manilor metalle Select the display adapter on which you w
50. he Open button then click OK button Choose your monitor model and click the Next button then click Next button 9 Click the Finish button then the Close button If you can see the Digital Signature Not Found window then click the Yes button And click the Finish button then the Close button O Microsoft Windows Millennium Operating System i Click Start Setting Control Panel Double click the Display icon Select the Settings tab and click Advanced Properties button O Select the Monitor tab Click the Change button in the Monitor Type area Choose Specify the location of the driver Choose Display a list of all the driver in a specific location then click Next button Click the Have Disk button Specify A D driver then click OK button 9 Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK Continue choosing Close button and OK button until you close the Display Properties dialogue box Microsoft Windows NT Operating System ai Click Start Settings Control Panel and then double click Display icon amp In Display Registration Information window click Settings Tab and then click All Display Modes amp Select a mode that you wish to use Resolution Number of colors and Vertical frequency and then click OK Click Apply button if you
51. his dence BID 11H Mee ddr nr e Eden Cic Farisb ko eer then wired To uninakali the dien lAdvancodi Plog and hay Monitor ama AF Erophot IN d reopuaritcecu rr H Soran fleet Siman gai ote Eh kl esis 1 Hite aros trust tide eon Core diewlav Fag tie Fee Pee Albers gami i coke qaqa koa IF he a p cee Thee er bevel es sm aah cee Ada Clare Pune 9 Monitor driver installation is completed O Microsoft Windows 2000 Operating System ih When you can see Digital Signature Not Found on your monitor follow these steps Choose OK button on the Insert disk window Click the Browse button on the File Needed window Choose A D Driver then click the Open button and then click OK button How to install Click Start Setting Control Panel Double click the Display icon amp Select the Settings tab and click Advanced Properties button Choose Monitor Casel If the Properties button is inactive it means your monitor is properly configured Please stop installation Case If the Properties button is active click the Properties button then follow next steps continually Click Driver and then click on Update Driver then click on the Next button Choose Display a list of the known drivers for this device so that can choose a specific driver then click Next and then click Have disk Click the Browse button then choose A D Driver Click t
52. ications are subject to change without prior notice 3 Class B Equipment Information Communication equipment for residential use This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas Class B equipment emits less electromagnetic waves than Class A equipment O Client Item Specifications LAN 1Gbps USB 2 0 4Ports Internet Browser MS Internet Explorer Photo JPEG BMP MPEG1 WMV Video Not exceeding 720p 3 Server Requirement Connect Client No CPU RAM Ethernet OS Minimum Just can load Server windows 2003 SPEC Program P3 400MHz 64Mbyte 100Mbps Seer Recommend 1 P4 1 0GHz 256Mbyte SPEC 2 4 P4 2 4GHz 512Mbyte windows 2003 100Mbps S erver 5 7 P4 3 0GHz 1Gbyte 8 10 P4 3 2GHz 2Gbyte The content presented above is the result of testing a specific server The information may change as the server may be different For some products the OS may not be supported When purchasing a product make sure to check whether or not the OS is supported 3 USB Local Device USB Connection Speed When booting up a monitor a blank screen may appear for 3 4 seconds until the MagicNet screen appears If you turn the monitor off while booting it may damage the product Local Device USB compatibility HID Human Interface Devices Keyboard Mouse MSC Mass Storage Class Devices using the SCSI Small Computer System Interfa
53. ime residual image or blurriness may appear Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time Contact SAMSUNG WORLDWIDE Terms For Better Display Authority 3 Authority 3 Information in this document is subject to change without notice 2006 Samsung Electronics Co Ltd All rights reserved Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co Ltd is strictly forbidden Samsung Electronics Co Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material Samsung is the registered trademark of Samsung Electronics Co Ltd Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPMS and DDC are registered trademarks of Video Electronics Standard Association the ENERGY STAR name and logo are registered trademarks of the U S Environmental Protection Agency EPA All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners MEXICO IMPORTADO POR SAMSUNG ELECTRONICS M XICO S A de C V Via Lopez Portillo No 6 Col San Fco Chilpan Tultitlan Estado de Mexico C P 54940 Tel 01 55 5747 5100 01 800 726 7864 EXPORTADO POR Samsung Electronics CO LTD 416 Mae tan 3dong Yeongtong gu Suwo
54. ing the Stand Using Other Stands 3 Connecting Cables 3 Connect to the host PC using a LAN cable Host PC Hub LAN Cable Monitor Connect the power cord to the power terminal at the back of the monitor amp Connect the mouse and the keyboard to the USB ports amp Connect the LAN port on the back of the monitor and the hub Connect the hub and the LAN port of the host PC The host PC must have an IP address After connecting the LAN and setting the IP address you can view the host PC screen on the monitor Use the VGA IN port to directly connect the monitor to a PC Connect to the VGA OUT port to display the same picture on another monitor such as the projector For presentation purposes Use the USB port to connect an external storage device DSC MP3 external storage etc Connecting Cables When used as a normal monitor Rear of Computer ATTN KG New Model Macintosh Rear of Monitor PERI Connect the power cord for your monitor to the power port on the back of the monitor Plug the power cord for the monitor into a nearby outlet EP Using the D sub Analog connector on the video card 474 Using Macintosh Connect the monitor and the Macintosh computer using the computer connection cable X Ifthe monitor and the computer are connected you can turn them on and use them 3 External Device Connection ec USB Connect USB devices such as a mouse
55. is not displayed normally You can check this from Start Setup System Hardware Device Manager Display Adapter 4 Visit the video card manufacturer s homepage and download and install the latest i driver For more information about the video card contact the card manufacturer RREBEBERSBRERBRBRREBSRSRSSRGREBSRBRSRSBARSPRPERBERBSRSRBRHSPRHBSRSRSRSRSRBRHRSBSRBRBRPBRRSBRSPRSRSES 2 As the Highlight program uses the communication lines please exit the Highlight program before you can access MagicTune Q Some of Samsung CDT monitors support the Highlight feature When using both the Highlight feature and MagicTune M simultaneously conflicts occur which cause errors aly E Make sure to turn OFF Highlight before using MagicTune Troubleshooting e MagicTune may not work in case monitor is replaced or driver of graphic card is updated while MagicTune is operating If so please restart the system Symptom Check List Check when MagicTune does not function properly MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play Have you changed your PC or video graphic card MagicTune doesn t work properly Solutions To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel Performance and Maintenance System Hardware Device Manager gt Monitors After de
56. itor upwards by 10 20 degrees Adjust the monitor height so that the top of the monitor is slightly below eye level e Adjust the monitor angle so that there is no reflected light on the screen Try to maintain your arms perpendicular to your armpits e Keep your arms level with the back of your hands e Keep the angle of the elbow perpendicular e Keep the angle of the knees at more than 90 degree Do not let your feet fall up from the floor Adjust the arm position so that it is below the heart e f you need repairs contact a Samsung Service Center Correct Disposal of This Product Waste Electrical amp Electronic Equipment Europe only Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product sho
57. lectric shock or fire Use only a properly grounded plug and receptacle An improper ground may cause electric shock or equipment damage Insert the power plug firmly so that it does not come loose A bad connection may cause fire Do not excessively bend the plug and wire nor place heavy objects upon them which could cause damage This may cause electric shock or fire 3 Do not connect too many extension cords or plugs to one outlet This may cause fire G Do not disconnect the power cord while using the monitor A surge may be caused by the separation and may damage the monitor Do not use the power cord when the connector or plug is dusty If the connector or plug of the power cord is dusty clean it with a dry cloth Using the power cord with a dusty plug or connector may cause an electric shock or fire Installation Notation Power Installation Cleaning and Use Others Be sure to contact an authorized Service Center when installing your set in a location with heavy dust high or low temperatures high humidity and chemical substances or where it will be operated for 24 hours continuously such as an airport train station or etc Failure to do so may cause serious damage to your set Place your monitor in a location with low humidity and a minimum of dust Failure to do so may cause electric shock or fire inside the monitor Do not drop the monitor when moving it This m
58. leting Plug and Play monitor find Plug and Play monitor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magic Tune Download the latest program The program can be downloaded http www samsung com monitor magic Tune e Visit the MagicTune website for technical support for MagicTune FAQs questions and answers and software upgrades e Visit the MagicTune website and download the installation software for MagicTune MAC The Magicline program is an additional program for monitor products Some computing systems that install either an older or the latest video driver are not compatible with Magictune Please visit the MagicTune Website for technical support for Magictune Specifications subject to change without notice Magictune is a trademark of SAMSLING ELECTRONICS CO Inc Windowst js a registered trademark of Microsoft Corp Other trademarks are property of their respective holders m Safety Precautions m Introduction m Connections a Using Windows XPe m Using the Software m Adjusting the Monitor m Troubleshooting amp Specifications m information O Adjusting the Monitor Control Buttons Direct Functions OSD Function 3 Control Buttons
59. lowing items are included with your monitor If any items are missing contact your dealer Contact a local dealer to buy optional items 3 Unpacking kiihai Without stand With Stand 3 Manual Warranty Card User s Guide Monitor Driver Quick Setup Guide Not available in all Natural Color software locations MagicTune software Cable D Sub Cable Power Cord 3 Sold separately a we Keyboard USB Mouse USB Features Package Contents Your Monitor 3 Your Monitor Front e MENU 000 MENU button LI MagicBright button 44 Volume button IL Adjust buttons W A o Enter button sh IW 3 SOURCE AUTO A Opens the OSD menu Also use to exit the OSD menu or return to the previous menu MagicBright is a new feature providing optimum viewing environment depending on the contents of the image you are watching Currently six different modes are available Custom Text Internet Game Sport and Movie Each mode has its own pre configured brightness value You can easily select one of six settings by simply pressing MagicBright control button 1 Custom Although the values are carefully chosen by our engineers the pre configured values may not be comfortable to your eyes depending on your taste If this is the case adjust the brightness and contrast by using the OSD menu 2 Text For documentations or works involving heav
60. n City Gyeonggi do Korea PRODUCT INFORMATION Image Retention Free LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention Warranty Warranty does not cover any damage caused by image retention Burn in is not covered by the warranty 2 What is Image retention During normal operation of a LCD panel pixel image retention doesn t occur However if the same image is displayed for a long time a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal This may cause the liquid crystal to build up in a certain areas of the display Thus the previous image is retained when switching to a new video image All display products including LCD are subject to image retention This is not a product defect Please follow the suggestions below to protect your LCD from image retention Power Off Screen Saver or Power Save Mode Ex e Turn the power off when using a stationary pattern Turn the power off for 4 Hours after 24 Hours in use Turn the power off for 2 Hour after 12 Hours in use e Use a Screen saver if possible Screen saver in one color or a moving image is recommended e Set the Monitor to power off with the PC Display Properties Power Scheme 2 Suggestions for specific applic
61. nstalled Hence the RealVNC server program is installed on a XPe client By using this program you do not have to move directly to the client site to resolve its problems Instead you can connect to the client from the server and solve problems remotely For this reason RealVNC is being used very usefully Only administrators can configure the RealVNC server properties To display the configuration dialog box for RealVNC double click the RealVNC icon in the system tray From this dialog box you can run a VNC server and configure a password and various properties The default password is set to Administrator Note that it is case sensitive MZ VNC Server Properties Service Mode 5 Sharing Desktop Capture Method Legacy Authentication Connections Inputs C No Authentication C ANE Password Authentication Configure NT Logon Authentication configure Encryption always Off z Generate Keys Prompt local user ta accept connections F Ony prompt when there is auser logged on wed fo O Internet Explorer A XPe Client includes Internet Explorer This program is permitted for all users For more information on Internet Explorer visit the Microsoft website G Enhanced Write Filter Enhanced Write Filter EWF protects a flash volume from write access and consequently preserves the durability of the flash device EWF provides read and write access through a cache to the client instead of allowing dire
62. olution Contact SAMSUNG WORLDWIDE Terms For Better Display Authority 3 For Better Display Adjust computer resolution and screen injection rate refresh rate oncomputer as described below to enjoy the best quality of picture You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT LCD Resolution 1280 x 1024 Vertical frequency refresh rate 60 Hz TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness For example the number of TFT LCD sub pixels that is contained in this product are 3 932 160 When you clean the monitor and the panel outside please apply the recommended small amount of cleaner by using soft and dry cloth and polish it Let LCD area not to be forced but to be scrubbed out softly If excessive force is applied you can have a stain on it If you are not satisfied with the quality of picture you can get better quality of picture by executing auto adjustment function in display screen that is appeared as window termination button is pressed If there s still noise after automatic adjustment use FINE COARSE adjustment function If you view a fixed screen for an extended period of t
63. only vivid natural color but also more realistic natural skin color with clearness 4 Intelligent Displays vivid natural color with clearness 5 MagicZone o The MagicZone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness sharpness saturation Hue of a certain area on the screen This offers an easy to use interface that highlights the video playing portion of your multimedia program by automatically detecting and highlight the desired area by dragging o When the mouse cursor is activated and it is necessary to de activate it to use it for other tasks right click your mouse or put the activated cursor Hon the taskbar and click When de activated the icon on the screen changes back to the one shown before activation o Especially MagicZone is appropriate to using the moving picture o Auto Detect If you run the Movie in some players MagicZone will automatically get the play screen highlighted it will be supported in players of Gom Adrenalin KCP Window Media and Power DVD etc Some other players also can be highlighted but could have some problems o Tusk menu HUE Adjust the tint of the color Saturation Adjusts the color saturation Brightness Adjusts the Brightness Adjusts the difference between the lightest and darkest areas of Sharpness the display Zone Off Turn off the zone that you have captured Reset Returns to the the default setting that vendor h
64. or small metal objects on the monitor This may cause a malfunction electric shock or fire If a foreign substance enters the monitor unplug the power cord and contact the Service Center Keep the product away from combustible chemical sprays or inflammable substances This may cause an explosion or fire Never insert anything metallic into the monitor openings This may cause electric shock fire or injury Do not insert metal objects such as chopsticks wire and gimlet or inflammable objects such as paper and match into the vent headphone port or AV ports It may cause a fire or an electric shock If an alien substances or water flows into the product turn the product off unplug the power connector from the wall outlet and contact Service Center If you view a fixed screen for an extended period of time residual image or blurriness may appear Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time 3 Adjust the resolution and frequency to the levels appropriate for the model Inappropriate resolution may cause undesirable picture quality 17 inch 43 cm 1280 x 1024 Keep the volume at a comfortable level when using the headphones Excessively loud volume levels may damage hearing Watching the monitor continuously at a too close angle may result in eyesight damage To ease eye strain take at le
65. p 5 TTL level V high 2 0V V low x 0 8V Maximum Pixel Clock 140 MHz Power Consumption AC 100 240V 10 50 60Hz Signal Cable 15pin to 15pin D sub cable Detachable Power Consumption Less than 70 W Dimensions W x D x H Weight 370 0 x 69 x 342 3 mm 14 6 x 2 7 x 13 5 inch Without Stand 370 0 x 200 x 404 3 mm 14 6 x 7 9 x 15 9 inch With Basic Stand 6 45 Kg 14 2 Ibs VESA Mounting Interface 100 mm x 100 mm Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play Capability This monitor can be installed on any Plug amp Play compatible system Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings In most cases monitor installation will proceed automatically unless the user wishes to select alternate settings Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm one millionth above is used for this product But the pixels of RED GREEN BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen This is not from bad quality and you can use it without uneasiness For example the number of TFT LCD sub pixels that is contained in this product are 3 932 160 Design and specif
66. r Useful Tips zih A monitor recreates visual signals received from the computer Therefore if there is trouble with the computer or the video card this can cause the monitor to become blank have poor coloring noise Video mode not supported etc In this case first check the source of the problem and then contact the Service Center or your dealer Judging the monitor s working condition If there is no image on the screen or a Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message comes up disconnect the cable from the computer while the monitor is still powered on if there is a message coming up on the screen or if the screen goes white this means the monitor is in working condition In this case check the computer for trouble m Safety Precautions m Introduction m Connections m Using Windows XPe m Using the Software m Adjusting the Monitor m Troubleshooting amp Specifications m information O Specifications Specifications PowerSaver Preset Timing Modes 3 Specifications General Model Name SyncMaster 720XT LCD Panel Size 17 Diagonal 431 8 mm Display area 337 92 mm H x 270 336 mm V Pixel Pitch 0 264 mm H x 0 264 mm V Type a si TFT active matrix Synchronization Horizontal 31 81 kHz Vertical 56 75 Hz Display Color 16 2 M Colors Resolution Optimum resolution 1280 x 1024 60 Hz Maximum resolution 1280 x 1024 75 Hz Input Signal Terminated RGB Analog 0 7 Vp
67. r of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor The Natural Color S W is the very solution for this problem It is a color administration system developed by Samsung Electronics in association with Korea Electronics amp Telecommunications Research Institute ETRI This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images For more information refer to Help F1 in the software program 3 How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD ROM Drive Then the initial screen of the program Natural Color will be executed Click Natural Color on the initial screen to install the Natural Color software To install the program manually insert the CD included with the Samsung monitor into the CD ROM Drive click the Start button of Windows and then select Run Enter D color NCProSetup exe and then press the Enter key If the drive where the CD is inserted is not D enter the applicable drive 3 How to delete the Natural Color software program Select Setting Control Panel on the Start menu and then double click Add Delete a program Select Natural Color from the list and then click the Add Delete button Monitor Driver Natural Color MagicTune Magiclune HELP Overview Installation
68. r ventilation may cause an increase in the internal temperature of the product resulting in a shortened component life and degraded performance Keep the plastic packaging bag out of children s reach The plastic packaging bag may cause suffocation if children play with it Notation Power Installation Cleaning and Use Others 3 Cleaning and Use When cleaning the monitor case or the surface of the TFT LCD screen wipe with a slightly moistened soft fabric Do not spray water or detergent directly on the monitor This may cause damage electric shock or fire Use the recommended detergent with a smooth cloth lf the connector between the plug and the pin is dusty or dirty clean it properly with a dry cloth A dirty connector may cause electric shock or fire Make sure to unplug the power cord before cleaning the product Otherwise this may cause electric shock or fire 3 Unplug the power cord from the power outlet and wipe the product using a soft dry cloth Do not use any chemicals such as wax benzene alcohol thinners insecticide air freshener lubricant or detergent Contact the Service Center or Customer Center for interior cleaning once a year Keep the product s interior clean Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire Notation Power Installation Cleaning and Use Others Do not remove cover or
69. ready to start a Remote Desktop session You must first establish a virtual private network connection or remote access service connection from your client computer to your host computer 1 Click Start point to Programs and then click Remote Desktop Connection Or double click the Remote Desktop Connection icon The Remote Desktop Connection window will open 2 Enter the host computer name You can configure detailed settings by clicking the Options button 48 Remote Desktop Connection Computer Cancel Help Options 3 Options General Enter the login information to connect to the host computer Enter your username and password to login to the host automatically E Remote Desktop Connection I p Hel Remote Desktop Connection Display The Remote Desktop Connection sends and receives compressed screen data If you set the resolution and color quality to the high option the speed may become slow E Remote Desktop Connection E Remote Desktop Connection Local Resource Specify whether to use the hard disks and ports E Bring to this computer In full screen mode only Programs Specify whether to display the Desktop or run an application whenever you are connected The default is Desktop E Remote Desktop Connection Remote Desktop zonnection rogram path ano Te Hane a NNI Start in the following folder Experience You can select your connec
70. rol menu e Auto Setup Auto adjustment allows the monitor to self adjust to the incoming video signal The values of fine coarse and position are adjusted automatically Adjusts the screen location horizontally and vertically Changes the clearance of image 2 Option Tab Definition You can configure MagicTuneT using the following options Preferences Source Select Loads the Preferences Dialog Box Preferences in use will have an V in the check box To turn on or off any Preference position the cursor over the box and click e Enable task tray menu To access the MagicTune menus click the icon on the task tray menu The menus are not displayed if the Enable System Tray is deselected in Options Basic Settings e Select Language The language chosen affects only the language of the OSD e Analog e Digital dicte 2 Support Tab Definition Shows the Asset ID and the version number of the program and allows you to use the Help feature Help Asset ID Visit the MagicTune M website or click to open the Help files User Manual if you need any help installing or running MagicTune M The User Manual opens within a basic browser window you can use the server to control the Client monitor Server program should be installed to use this program as Client Shows the user name that is registered in PC User Name User ID Shows the user ID that is register in PC Server IP Write down the server IP D
71. rties button on the Monitor tab and select Driver tab Plug and Play Monitor and JHO Prophet M Properties QW GeFonme3 Gener Adapter PAra Enos Phag ard Play Honor a Cole Connection Morac Trenes nc I Ploro adb Screen veloz hi naka 60 Hanz O Hide modes that fhid m Gant daplay Chasing thia check bok slots you Lo lect nagana Grae medica changed apple feted Fab his m This may kad bo an arate cepa G Click Update Driver Plug an Play Monitor Pirot lies bansa Gian Ping ardi Play bol cerato Diyes Proda Dhines Dhata Dire Ves gari Dig knd Iz keena Microsolt Pees PEE HG 5 3 20601 0 Ilic rado Windowe EU Phulbiabiar Tao nene aiai a han cisci Pele To glaia Ahas diea Bos ee IF iho desane Nada ater thee die poli buck b Uwe pigaan ira Te wel e a piaj oai Select Don t search will Hartearg Update Wizard Pisto chooce yaa znacch and inalallaban oplikanst Color Managamari and select Install from a list or C each ka thus bett drives in Pese locant Lien the check banana bakya ba lirnil ca gand the delle each which imncludet lc pathi aces serrure a T Fus bet dere loud kal be acil abest Seach removable padis Bopp CD FM Irache Hing kesion in fhe parch Eor search will choose the diver to intal Choose this option io select the device dre Dom a lit Wraae not gassntes that Shes
72. s Check when MagicTune does not function properly MagicTune M doesn t work properly MagicTune feature is found only on PC VGA with Window OS that supports Plug and Play To check whether your PC is available for MagicTune feature follow the steps below When Windows is XP Control Panel Performance and Maintenance System Hardware Device Manager Monitors After deleting Plug and Play monitor find Plug and Play monitor by searching new Hardware MagicTune is an additional software for the monitor Some graphic cards may not support your monitor When you have a problem with the graphic card visit our website to check the compatible graphic card list provided http www samsung com monitor magictune Have you changed your PC or video graphic card Download the latest program The program can be downloaded http www samsung com monitor magictune Visit the MagicTune website and download the installation software for MagicTune MAC 3 Check the following items if there is trouble with the monitor Symptom The screen does not appear when switch to the Client Mode The client screen appears but I cannot connect to the server cannot access the Internet in the Client screen The contents video voice on the server do not play smoothly on the Client Monitor have connected a digital device such as a digital camera camcorder or USB
73. s displayed Select an operation from the combo box and click OK You can also log off or shut down your client using the Windows Security dialog box displayed when pressing the Ctrl Alt Del keys If Force Auto Log on is activated you will be immediately logged on after each log off The Client Log off Restart and Shutdown take effect on the operations of the EWF Enhanced Write Filter To keep the changed system configuration you must save a cache for the current system session into flash memory Failing to do so will cause the changed configuration to be lost when the client is shutdown or restarted In the case of logging off the configuration is remembered when loggin in again For more information on the Enhanced Write Filter refer to the Program Help What i Windows XP WPa Client Logon Embedded Desktop Programs Control Panel Configuring Utilities Recover the System 3 Programs XPe Client is a client server based computing platform On this platform the client accesses the server each time it needs a program and it only receives the user interface screens from the server Hence various programs such as ICA RDP and VNC which are installed on a XPe Client are used to help the client access the server and perform user tasks 3 Citrix Program Neighborhood Independent Computing Architecture ICA allows you to use applications on the server through a wide range of platforms and networks regardless of their basis
74. se the monitor on screen display OSD MagicTune M supports Windows 98 SE Me 2000 XP Home and XP Professional It is recommended using MagicTune in Windows 2000 or later MagicTune allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you OSD Mode The OSD mode allows easy adjustment of monitor settings without taking pre defined steps You can access the desired menu item to set with ease Overview Installation OSD Mode Color Calibration Uninstall Troubleshooting Installation 1 Insert the installation CD into the CD ROM drive 2 Click the MagicTune installation file 3 Select installation Language Click Next MagicTune3 8 Client Pivot InstallShield Wizard Choose Setup Language lah BK T E mp 1 m elect the Lanquage bor the ur 4 When the InstallationShield Wizard window appears click Next Magiclune3 6 Client Pivot imstalishield Wizard Welcome to the Installshield Wizard for Magbatuna3 8 Cient_Pivol The inal held Wirend val incall Magiduna3 8 Client Pivab on pour compres To come click He Magiclune3 6 Client Fivet lnetalishield Wizard License Agreement eane eai Hie Palmy rg ber mga agree ant ra m m OFTWARE PRODUCT HPOATANTREAD CAREFULLY Thi Samsung Elecironics Enc zer License EULA i a legal agreement individual or a single entity and Samsung Electronics Co
75. see the screen working normally after clicking Test If the screen is not normal change to a different mode lower mode of resolution colors or frequency f there is no Mode at All Display Modes select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide Linux Operating System iik To execute X Window you need to make the X86Config file which is a type of system setting file Press Enter at the first and the second screen after executing the X86Config file The third screen is for setting your mouse Set a mouse for your computer The next screen is for selecting a keyboard Set a Keyboard for your computer 9 The next screen is for setting your monitor First of all set a horizontal frequency for your monitor You can enter the frequency directly Set a vertical frequency for your monitor You can enter the frequency directly Enter the model name of your monitor This information will not affect the actual execution of X Window 9 You have finished setting up your monitor Execute X Window after setting other requested hardware Monitor Driver Natural Color MagicTune 3 Natural Color Natural Color Software Program Natural Color Pro color management system Monitor Color Cal amp Profiling Preference Copyrightics 2003 Samsung Elgcirenics Ca Ltd One of the recent problems in using a computer is that the colo
76. sh to complete creating the new connection Add New ICA Connection j 3 3 Your ICA Connection has been successfully set up To add it to your Custom Connections click Finish To edit the properties For this ICA Connection later click its icon inside your Program Neighborhood then click the Properties button i Cancel Help x For more information on the ICA Client Program visit the Citrix web site 3 The Remote Desktop Connection You can control a running terminal server or another computer Windows 95 or later remotely through a remote desktop connection Remote Desktop Windows XP Professional or Windows 2000 2003 Server must be installed on the computer to be controlled remotely This computer is called a host A remote computer running on an operating system later than Windows 95 is required This remote computer is called a client The client software for the remote desktop connection must be installed on the client You must also be connected to the Internet A broadband Internet connection is good for high performance However because the remote desktop transmits a minimum set of data including the display data and keyboard data to control the host remotely a broadband Internet connection is not required You can run a remote desktop on a low bandwidth Internet connection When running a remote desktop on Windows XP Professional you cannot use the operating system of your computer Enabling
77. st Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast MagicBright D M oy gt BESRBEGEBSERBEEHEBEREBERBSSERSSEBSSBSBBSERERERBRHRSHBSBEBEBSERBERBRESERSHETEBERBEBERZGESGESNESGHSNE NT Some monitor will only support Four modes Text Internet Entertain Custom TIE TITILA NIKKA ITIK AA Tm Color Tab Definition Adjusts the warmth of the monitor background or image color je MagicColor Gamma and Color Innovation will be shown only in the Aig H Tura k monitor that supports these functions PRPS SSS PSPSPS SS TETE SS SSS SSS SSS SSS SSS SESS ESSE SPSS EAT ALALA Color Control Calibration MagicColor Adjusts of the monitor image color You can change the monitor color to your desired color e R G B The process through which the colors of your choice are optimized and maintained You will find MagicTune extremely useful if you are one of those who wish to view images with their full details accurately reproduced including web images and ones produced by a digital camera or scanner MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality 1 OFF Returns to the original mode 2 DEMO The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left 3 Full Displays not
78. the arm type base wall mount hanger or other base E s em m Safety Precautions m Introduction m Connections m Using Windows XPe m Using the Software m Adjusting the Monitor B Troubleshooting E Specifications m information O Using Windows XPe What is Windows XP XPe Client Logon Embedded Desktop Programs Control Panel Configuring Utilities Recover the System 3 What is XPe Client An Microsoft Windows XP Embedded XPe client uses the Microsoft Windows XP Embedded operating system When an XPe client is connected to a Citrix ICA server or another server that can provide the Microsoft RDP service data for the keyboard mouse audio video and display are transmitted through the network between the client and the server Connectable Servers A Citrix ICA Independent Computing Architecture Server A Microsoft Windows 2000 2003 Server where the terminal services and Citrix MetaFrame are installed AMicrosoft Windows NT 4 0 Server where the Citrix MetaFrame is installed A Microsoft RDP Remote Desktop Protocol Server A Microsoft Windows 2000 Server where the terminal services are installed A Microsoft Windows 2003 Sever A Microsoft Windows XP Professional This manual describes the functions provided by the XPe Client However it does not explain general functionalities of Windows XP Embedded For more general information on Windows XP Embedded refer to Windows XP Embedded Help provided by Microsoft
79. tion section or contact your dealer Symptom No images on the screen cannot turn on the monitor Check List Is the power cord connected properly Can you see Check Signal Cable on the screen If the power is on reboot the computer to see the initial screen the login screen which can be seen Can you see Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz on the screen There is no image on the screen Is the power indicator Solutions Check the power cord connection and supply Check the signal cable connection If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Preset Timing Modes If the initial screen the login screen does not appear contact the Service Center or your dealer You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly If the display exceeds SXGA or 75 Hz a Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message is displayed If the display exceeds 85 Hz the display will work properly but the Not Optimum Mode Recommended Mode 1280 x 1024 60 Hz message appears for one minute and then disappears Please change to the recommended mode during
80. tion speed and select and share environmental options Remote Desktop Connection General Display Local Resources Programs Experience Performance 2 Choose your connection speed to optimize performance Modem 55 Kbps Allow the following Desktop background Show contents of window while dragging Menu and window animation IY Themes v Bitmap caching 4 Click Connect The Log On to Windows dialog box appears 5 In the Log On to Windows dialog box type your username password and domain if required and then click OK The Remote Desktop window will open and you will see the desktop settings files and programs that are on the host computer X For more information on Remote Desktop Connections visit the Microsoft web site 3 RealVNC Server RealVNC Virtual Network Computing is a software program that allows you to connect to another computer on a network and control it remotely Compared to the Windows terminal service which has a similar function RealVNC allows only one administrator to connect to the server at a time That is if another is connected to the server as an administrator the previous administrator connection will be disconnected In RealVNC the server and the viewer communicate via the VNC protocol You must install a RealVNC server on the computer you wish to control remotely and a VNC viewer on the computer which remotely controls the computer where the RealVNC server is i
81. tted over the LAN Check your LAN connection status This model supports USB devices that support removable disk functions without an additional driver installation Check if the device you want to connect to is a device that supports the removable disk function without an additional driver installation 1 Check the files on the card If only abnormal files e g OKByte broken JPEG exist the files do not appear on the screen 2 The time required to display is determined by the size of the file Wait a moment 3 Check if the format of the file is supported by the Client Monitor If the extension of the file has been changed the file will not be played 3 Check the following items if there is trouble with the monitor Check if the power cord and the video cables are properly connected to the computer Check if the computer beeps more than 3 times when booting If it does request an a service for the main board of the computer If you installed a new video card or if you assembled the PC check if the installed the adaptor video driver and the monitor driver Check if the scanning ratio of the video screen is set at 56 Hz 75 Hz Do not exceed 75 Hz when using the maximum resolution If you have problems in installing the adaptor video driver boot the computer in Safe Mode remove the Display adaptor at the Control Panel System Device Administrator and then reboot the computer to reinstall the
82. uld not be mixed with other commercial wastes for disposal E INE el m m Safety Precautions m Introduction m Connections m Using Windows XPe m Using the Software m Adjusting the Monitor B Troubleshooting E Specifications m information O Introduction Features Package Contents Your Monitor 3 Features 3 What is a network monitor a a e tae re ue Ji pam I AA n Py FF s 2 PA d E a an LO FA r M ar Pai E SS o emm d Pl j ee ui eg Je f px SSS P F Se rac du jl ee jf A network monitor can be used for the same purposes as a common monitor It also provides the functionalities of most computers such as an Internet connection creating documents editing images via a connection to the host PC over the LAN In addition it allows you to connect an external device DSC MP3 external storage media to the USB port and play music movies and games It is a new concept monitor You also can share the screen being displayed on your network monitor with other users by connecting a projector or other display device to its VGA OUT port You can use this functionality for video conferencing and a variety of shared tasks n addition because Windows XP is installed on your network monitor you can perform Internet searches and USB memory searches independently of your host PC Features Package Contents Your Monitor 3 Package Contents Please make sure the fol
83. ure the video card is fully inserted in it s slot Reboot the computer Set the video card by referring to the video card manual Adjust screen image position and size using the OSD Adjust the resolution and frequency at the video card Refer to the Preset Timing Modes The screen can be unbalanced due to the cycle of the video card signals Readjust Position by referring to the OSD Have you adjusted the resolution or frequency on the monitor Is the frequency properly adjusted when checking the Display Timing on the menu Have the Windows colors been set properly Has the video card been set properly Have you installed the monitor driver See the video card manual to see if the Plug amp Play VESA DDC function can be supported Adjust the resolution and frequency of the video card Refer to the Preset Timing Modes Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes The maximum frequency per resolution may differ from product to product Windows XP Set the resolution at the Control Panel Appearance and Themes Display Settings Windows ME 2000 Set the resolution at the Control Panel Display gt Settings Set the video card by referring to the video card manual Install the monitor driver according to the Driver Installation Instructions Install the monitor driver according to the Driver Installation Instruction
84. voi mand ba mihal chek Hasse Dok Model SyncMaster 1715717957 1705 Mage Synchi sater CX 1755 Ts dienen an rend dg all signed If you can see following Message window then click the Continue Anyway button Then click OK button Hardware Installation A The software pou ane installing for this hardware Synch ache 1715 1755 7 1705 MagschyncMassber G41 755 has not passed Window Logo becting to werily is compalibity with ineho 20P Tell ma wake thier bastig it important Continuing your installation of thie software map impir or destabilize the corect operation of your system ether immediately or m the future Microzoll strongly recommends thal pou stop hit installation now and contact the hardware vendor for software that haz passed Windows Loge testing This monitor driver is under certifying MS logo and this installation doesn t damage your system The certified driver will be posted on Samsung Monitor homepage http www samsung com Click the Close button then click OK button continually Hardware Update Wizard Sandalan TFS 115521705 Magic5yncMaster CX ma Completing the Hardware Update aoe Wizard E BymaMiaales 1715717554 1705 Magectsyncil antes The vazaid Fiat hrsihend mibaling the saba ka Danas Pieper D ai i in E Loc hdi VES Hapon cba Drives Dae anm zin Dia fied cuni T nn Digia Shpa Hot gaie pigra Error Delas To imm datali about the dira filo To updale tya cheer Bor i
85. y text 3 Internet For working with a mixture of images such as text and graphics 4 Game For watching motion pictures such as a game 5 Sport For watching motion pictures such as a sport 6 Movie For watching motion pictures such as a DVD or Video CD gt gt Click here to see an animation clip When OSD is not on the screen push the button to adjust volume Adjust items in the menu Activates a highlighted menu item SOURCE button AUTO button Power button Q Power indicator Push the SOURCE then selects the video signal while the OSD is off When the SOURCE button is pressed to change the input mode a message appears in the upper left of the screen displaying the current mode Analog or MagicNet input signal Use this button for auto adjustment gt gt Click here to see an animation clip Use this button for turn the monitor on and off Be careful as pressing the Power button in client mode will shut down Windows XPe Be careful that if you force shut down Windows it may cause damage This light glows green during normal operation and blinks green once as the monitor saves your adjustments See PowerSaver described in the manual for further information regarding power saving functions For energy conservation turn your monitor OFF when it is not needed or when leaving it unattended for long periods G Rear oe O The configuration at the back of the monitor may vary

Samsung 720XT Computer Monitor User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents