Rowenta Powerglide Steam Iron Iron User Manual
Contents
1. Service center information is subject to change Please visit our website at www rowentausa com or call our service center information line at 781 306 4620 The information line provides current service center information and listings in California The pilot light indicates that the iron is heating When heated the light will go off It is normal for the indicator light to go on and off during use Before using the iron for the first time or if the iron has not been used for a few weeks allow it to steam for about 1 minute over an old towel or cloth Steam Ironing For steam ironing turn the temperature control dial to the red setting Delicate syn thetics should be dry ironed synthetics silk wool cotton linen steam setting Self Clean After ironing move the variable steam control from min to max several times This ensures the Vapodur valve remains free of mineral build up and the iron will continue to steam See self cleaning section in instructions for additional cleaning feature Dry ironing 10 Push the steam control to the minimum setting When heated the temperature control light will go off You may begin dry ironing TROUBLESHOOTING Problem Possible cause Solution Iron is leaking DISTILLED WATER DO NOT use 100 pure distilled water use tap water In very hard water areas mix half tap water with half distilled to reduce hardness or use inexpensive bot2. hot exercise care while wiping E Place iron on heel and leave to cool IMPORTANT Before using the iron after self cleaning test steam and burst of steam on an old towel or cloth to ensure all loose material has been removed from the iron WATER Rowenta irons are designed to be used with REGULAR TAP WATER up to 12 grains of hardness If your water is harder than this Rowenta recommends mixing half tap water with half distilled water which reduces the hardness or using inexpensive spring water Never use 100 distilled water since this can cause the iron to spit and leak Softened watrer There are many types of household water softeners and the water from many of them is perfectly acceptable for use in an iron However some types of softeners particularly those that use chemicals such as salt can cause the iron to spit and leak during use If you experience this type of problem we recommend that you try using inexpensive bottled spring water or untreated tap water Never use 100 distilled water
3. soleplate When cold and unplugged the iron can be cleaned with a damp cloth and wiped dry Rowenta soleplates have excellent non stick properties and can be simply wiped clean when cold Spray setting Ensure there is water in the tank Moistening the fabric with the spray will make wrinkle removal easier Press the spray button down slowly for a jet or quickly and strongly for a mist Do not spray silk etc To prevent scratching of the sole plate do not iron over sharp objects zippers etc Do not place the iron on rough surfaces e g metal iron support which may scratch the soleplate In normal use a draggy coating may build up on the soleplate starch detergent buildup burnt synthetic fibers This can be easily removed by using the Rowenta Soleplate Cleaning Kit or a quality hot iron soleplate cleaner available at most stores Do not use abrasive household cleaners or abrasive cleaning pads AFTER IRONING Unplug the iron The variable steam control must be at the max setting in order to empty the water from the tank E After emptying always push the variable steam control to the min setting and allow the iron to cool down before storing away E Always store the iron on its heel protects the soleplate E You should never store your iron on its soleplate even when it is cold SELF CLEANING Vapodur Valve The patented Vapodur valve ensures that the opening which allows the water to drip fr
4. 7 Close supervision is necessary for any appliance being used by or near children Do not leave iron unattended while connected or on an ironing board 8 Burns can occur from touching hot metal parts hot water or steam Use caution when you turn a steam iron upside down there may be hot water in the water tank 9 The use of accessory attachments is not recommended by Rowenta and may result in fire electric shock or personal injury SPECIAL INSTRUCTIONS 1 This is a 1200 or 1400 watt appliance To avoid a circuit overload do not operate another high wattage appliance on the same circuit 2 If an extension cord is absolutely necessary a 12 ampere cord should be used Cords rated for less amperage may overheat Care should be taken to arrange the cord so that it can not be pulled or tripped over After the iron has cooled wrap the cord loosely around the handle 4 Your Rowenta appliance is intended for household use only SAVE THESE INSTRUCTIONS W 3 way Auto off Auto off is not an on off switch Unplug the iron when it is not in use Depending on model If the iron Filling with water is not moved while it is plugged in 2 Slowly remove the protective an internal safety switch will turn it off label cover from the soleplate It will turn off in 8 minutes if left verti Holding the iron vertical pour cally or in 30 seconds if left on its sole water into the water filling inlet up plate or tipped ov
5. Rowenta Powerglide Instructions for use Description A Spray nozzle B Water filling inlet C Variable steam control with Self clean Depending on model Spray button Burst of steam button Auto off indicator light Depending on model Temperature control dial Flexible cord protector Power cord Pilot light Stainless steel soleplate Transparent water tank mm g PAST SEO IMPORTANT SAFETY INSTRUCTIONS When using your iron basic safety precautions should always be followed including the following Read all instructions before using the iron 1 Use iron only for its intended use 2 To protect against a risk of electric shock do not immerse the iron in water or other liquids 3 The iron should always be turned to Min before plugging or unplugging from outlet Never yank cord to disconnect from outlet instead grasp plug and pull to disconnect 4 Do not allow cord to touch hot surfaces Let iron cool completely before putting away Loop cord loosely around handle when storing 5 Always disconnect iron from electrical outlet when filling iron with water or emptying and when not in use 6 Do not operate iron with a damaged cord or if the iron has been dropped or damaged To avoid the risk of electric shock do not disassemble the iron Ship it to the nearest Rowenta Appliance Service Center for examina tion and repair Incorrect reassembly can cause a risk of electric shock when the iron is used
6. er A red flashing light to the max mark on the water indicates that the auto off has been tank Plug the iron into the outlet activated To switch the iron on again move the iron or gently shake it Vertical steaming Depending on model Check packaging This is especially useful for getting Burst of steam 8 To remove stubborn wrinkles or press in a sharp crease use the burst of steam button Press the button firmly a strong burst of steam penetrates deep into the fabric Leave an interval of at least four seconds between pressing the burst of steam button With water wrinkles out of hanging clothes curtains etc Warning Never iron clothes on the body or point your iron at anybody when steaming in the tank the burst of steam button can be used as soon as the steam ironing temperature has been reached Rowenta Inc 196 Boston Avenue Medford MA 02155 U S A OFFICE LOCATION ONLY If your appliance needs service ship the product to your nearest regional service center If in warranty Rowenta will repair or replace the product at their discretion If the product is out of warranty you will be advised of the cost of repair before any work begins Tel 781 396 0600 www rowentausa com Our main service centers are listed below Turnpike Appliance 3495A Lawson Blvd Oceanside NY 11572 516 483 5596 Authorized Appliance 1644 West Ogden Ave Downers Grove IL 60515 630 852 1550
7. om he water tank into the steam chamber of your iron remains unaffected by hard water deposits To ensure your iron continues to steam efficiently the valve MUST be opened and closed a few times This is done by moving the variable steam control from min to max a few times each time you finish ironing Steam Chamber Cleaning Function Depending on model This function allows loose mineral deposits and other impurities that build up inside the iron to be flushed out This type of self cleaning only needs to be carried out occasionally and never more than once a month E Fill the iron with cold tap water and set variable steam to min E Stand on heel and plug in E Set thermostat dial to max position E When the iron reaches the correct temperature indicator light will go out unplug iron E Hold iron horizontally over the sink with soleplate pointing away from body E Slide variable steam control completely over and hold in the section marked SELF CLEAN WARNING Doing this will cause steam and hot water to be ejected from the soleplate Take all proper precautions and hold iron away from body Move the iron gently back and forth and from side to side until all water has run through E Carefully wipe all water and material from the soleplate with an old folded towel as the water and minerals can stain the soleplate although this has no effect on glide or per formance WARNING Iron and soleplate may still be
8. tled spring water If you experience leaks or spitting change to untreated tap water or inexpensive bottled spring water DO NOT use 100 distilled water Set thermostat to the position Allow iron to heat up light goes out before using steam Is auto off activated Move iron or gently shake Overuse of burst of Allow more time between each steam burst SOFTENED WATER Is iron hot enough Warm handle The shut off circuit in the handle produces a small amount of heat This is normal and will stop when iron is switched on Auto shut off is activated Iron won t heat Is iron plugged in Thermostat set too low Check plug is in socket Turn thermostat to a higher setting Is auto off activated Move iron or gently shake This is normal Indicator light goes on and off The light goes on and off showing the thermostat is switching the heat on and off to maintain the correct temperature Iron does not Iron is not hot steam enough Set thermostat to the position Always allow iron sufficient time to heat up before activating the steam control Move steam control forward and back several times to clear blockage Steam valve is clogged Ensure that the iron is fully heated light goes out before using steam Push the variable steam control to the desired steam setting Temperature dial must be set to the setting for steam Cleaning the iron and
Download Pdf Manuals
Related Search