Home
RocketFish RF-RBWHP01 Headphones User Manual
Contents
1. or line out jack use the supplied 3 5 mm to RCA adapter cable Caution To avoid risk of fire and to prevent damage only use the AC adapter supplied with your wireless headphones Make sure that the power supply outlet matches the AC adapter s 120V before making the connection 1 Connect the AC adapter connector to the docking station s DC IN jack 2 Connect the AC adapter plug to an AC power outlet The STANDBY indicator lights red steadily when the docking station is plugged in Caution Plug the AC adapter into the power outlet only after all other connections are completed Important Before using the wireless headphones for the first time make sure the batteries are fully charged for at least 16 hours This will help provide a longer operating lifetime for the batteries Place the headphones onto the docking station Make sure that the headphone charging contacts and the docking station charging pins make contact e The docking station charging indicator turns red to indicate the headphones are charging eae e When the headphones are fully charged which takes contact WS about eight to nine hours the docking station charging indicator turns green Docking station charging pin Notes The batteries will last up to ten hours with continuous use depending on the headphone volume level and distance from the docking station The headphones can be charged even if the docking station or headphones are turned off 1 S
2. you can enable using the hub switch on the back of all Rocketboost senders and sender receivers If this is your first Rocketboost product you should make the docking station the hub if you already have Rocketboost products you should disable hub mode on the docking station Important Hub devices must always have power for your network to operate The hub device can be in standby power saving mode but must stay plugged in with i i r oehel U K S ET U p G y D E 2010 BBY Solutions Inc All Rights Reserved Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield MN USA 55423 3645 wireless ENGLISH 10 0801
3. RF RBWHP01 Rocketboost Wireless Stereo Headphones Taro rocketfi sh 8 AC power adapter Lg Rechargeable batteries 2 3 5 mm to RCA adapter cable RCA audio cable User Guide The headphones are powered by two AA rechargeable batteries Each earpiece houses one battery Notes e Donotinstall non rechargeable batteries Make sure that all batteries are installed correctly 1 With an earpiece cushion facing you unlock and remove left and right earpiece cushions by slightly rotating them clockwise then pulling them away from the headphones 2 Insert one AA rechargeable battery into each battery compartment Make sure to align the and symbols on the batteries with the symbols in the battery compartments 3 Replace the left and right cushions Caution To prevent damage to your system make sure all components are turned off before making connections In a typical user installation the docking station is connected to the audio output of a TV Other devices ALM FOULE a with audio outputs could be used as well seer To connect the docking station to your audio cy source _ Using the supplied RCA audio cable connect the audio output jacks of your audio source to the AUX INPUT jacks of the docking station Make sure that you connect the RCA cable supplied same color jacks together the white to the white and the red to the red Note If your audio source has only a 3 5 mm phones
4. et the POWER switch on the left earpiece of headphones to ON 2 Press the POWER button on the docking station The headphones and docking station must be joined or wirelessly connected to each other so that audio can be sent from the docking station to the headphones Since the headphones and docking station are pre joined at the factory you can skip this step and go to the Listening through the headphones step Follow this procedure only if you need to rejoin the headphone and docking station For information on how to use this product with an existing Rocketboost network see your User Guide To join the headphones to the docking station 1 Set the HUB STATUS switch on the docking station to ENABLE if this is your first Rocketboost product set e The power indicators turn green when the HUB STATUS switch is set to ENABLE e The power indicators turn blue when the HUB STATUS switch is set to DISABLE 2 Press and hold the CONNECT button on the docking station for more than three seconds to put it into joining mode The power indicator starts blinking rapidly and the unit will stay in joining mode for 30 seconds 3 Press and hold the CONNECT button on the headphone for more than three seconds so the docking station and headphone enter joining mode e The power indicator lights steadily if the joining was successful e The power indicator blinks slowly if the joining was not successful For more information see your User Guide Se
5. t the headphone s volume level to the minimum 2 Turn on the headphones and docking station Make sure that your docking station and headphones are wirelessly joined The power indicators light steadily if the docking station and headphones are joined and blink slowly if they are not If they are not joined see Establishing Communication above or in the User Guide 3 Put your headphones on your head Adjust the angles of the left and right ear pieces until you feel comfortable 4 Turnon your audio source and begin playback If there are multiple sources in the Rocketboost network press the SOURCE button on the headphones to find the source you want to listen to The TX indicator on the docking station if it is a hub blinks several times indicating that the current audio source is changing 5 Adjust the headphone volume to your normal listening level Caution Continuous use at high volume may permanently damage your hearing Note If the system is connected to an A V receiver with an external amplifier turn off the amplifier to prevent hearing sound from the amplifier speakers 1 Set the POWER ON OFF switch located on the headphone left earpiece to OFF 2 Press and hold the POWER button on the docking station The power indicator on the docking station goes off Rocketboost network notes Every Rocketboost network must contain one hub device which helps devices join the network The network can have only one hub which
Download Pdf Manuals
Related Search
Related Contents
USER'S MANUAL XPRIM EVOLUTION BED Kenwood KAC-8103D Stereo Amplifier User Manual VR2C Users Manual-5073-03 Philips SVZ122 User's Manual 取扱説明書 Bedienungsanleitung/Garantie DG 3235 DAMPFGARER Copyright © All rights reserved.
Failed to retrieve file