RCA DRC300iH DVD Player User Manual
Contents
1. User manual DRC300iH O ONISTANDBY J openicLose prav sToP er dise DIGITAL AUDIO HOM HIGH DEFINITION MULTIMEDIA INTERFACE SAFETY PRECAUTIONS Caution Marking and rating plate was located at rear and bottom enclosure of the apparatus CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL WARNING THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE CAUTION Use of controls or adjustments or The lightning flash with an arrowhead performance of procedures other than those symbol within the equilateral triangle specified may result in hazardous radiation is intended to alert the user to the exposure presence of uninsulated dangerous CAUTION DANGER OF EXPLOSION IF voltage within the product s enclosure JBATTERY IS INCORRECTLY REPLACED that may be of sufficient magnitude to REPLACE ONLY WITH THE SAME OR cause an electric shock EQUIVALENT TYPE the CAUTION TO REDUCE THE RISK OF FIRE equilateral triangle is intended to alert DO NOT PLACE ANY HEATING OR COOKING the user to the presence of important APPARATUS BENEATH TH2. Cleaning the Disc A defective or soiled disc inserted into the unit can cause sound to drop out during playback Handle the disc by holding its inner and outer edges Do NOT touch the surface of the unlabeled side of the disc an Do NOT stick paper or tape on the surface of Do NOT expose the disc to direct sunlight or excessive heat Clean the disc before playback Wipe the disc from the center outward with a cleaning cloth NEVER use solvents such as benzine or alcohol to clean the disc Do NOT use irregular shaped discs example heart shaped octagonal etc They may cause malfunctions Seanad the Unit Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit Wipe the unit with a dry soft cloth If the surfaces are extremely dirty wipe clean with a cloth that has been dipped in a weak soap and water solution and wrung out thoroughly then wipe with a dry cloth Never use alcohol benzine thinner cleaning fluid or other chemicals Do NOT use compressed air to remove dust Important Note Before transporting the unit remove the disc from the disc compartment 3 CONTROL REFERENCE GUIDE Remote Control 1 OPEN CLOSE Button l ee Press to open or close the disc tray spose 5 Ot 2 STANDBY ON Button 2 unis Eo supti ne Press to turn on the unit or put it in 3 O p QY OH Tg 17 standby mode 4 a Ga es e 8 9 3 AUDIO Button 6 i iH Press to select one of the audio sound E
3. You may also navigate using your iPod Docking System for iPod l iPod y Photos Jd Videos Settings screen after pressing CLEAR key to activate the menu on the iPod screen e Press the II PAUSE button to pause press the gt PLAY button to resume e Press the I lt 4 gt gt I button to skip to the previous next song e Press the lt lt gt gt button to begin fast reverse forward press the gt PLAY button to resume normal playback Press REPEAT DISC button to select a repeat playback mode a single repeat or all songs repeat Press again repeatedly to cancel this repeat playback 4 Press the RETURN button to go back to the previous menu Note You can use the 4 P button to quickly navigate menu lists one screen at a time Playing Photos 1 In iPod iPhone Home menu use the W A button to select Photos and press the OK button Navigate your iPod Photo Library directly from your iPod will appear on the screen 2 Please use the control on your iPod iPhone to operate e Press the II PAUSE button to pause press the B PLAY button to resume Press the k lt gt gt I button to skip to the previous Docking System for iPod next photo TT 3 Press the RETURN button to go back to the previous an a 4 Press the CLEAR button to exit Photo Mode Using an iPod Touch to view photos 1 In iPod Home menu use the W A button to select Photos and press the OK button Navigate your iPod Photo
4. 2 Press or button to highlight a specific field and press the corresponding number button s for the title you want 3 Press the OK button to confirm The unit will start playback about 3 seconds later Locating a specific time oe You can move to a specific location by entering its corresponding time hours minutes seconds 1 Press the GOTO button Lan 2 Press or P button to highlight time oF EE 3 Press the corresponding number buttons for the setting point you want 4 Press the OK button to confirm The unit will start playback about 3 seconds later Note Some discs may not respond to this process Some scenes may not be located as precisely as you specified This method for accessing specific locations is available only within the current title of the DVD disc REPEAT PLAYBACK pvb ED You can play a specific title or chapter repeatedly Title repeat chapter repeat A B repeat BYP TT 4 22 CH 3 4 Repeating a chapter DVD You can play the same chapter repeatedly 1 While the disc is playing press the REPEAT DISC button until the REP CHAPTER indicator displays on the screen The current chapter is played repeatedly Repeating a title DVD You can play the same title repeatedly 2 While the disc is playing press the REPEAT DISC button until the REP TITLE indicator displays on the screen The current title is played repeatedly To resume normal playback 3 While the disc is playing press the REPEAT DISC b
5. DIGITAL CONNECTION preferred Display units information 9 iPod iPhone dock door 4 Power Indicator Push once amp slide out the iPod iPhone Indicator On The unit is in standby mode dock Indicator Off The unit is turned on 5 ON STANDBY Button Turn the unit on or put it in standby mode i saoo LI Tep Towalloutet 10 11 13 14 15 12 10 COMPOSITE VIDEO OUT jack 11 HDMI OUT jack 12 S VIDEO OUT jack 13 AUDIO OUT L R jacks 14 COAXIAL DIGITAL AUDIO OUT jack 15 COMPONENT VIDEO OUT jacks Y Pb amp Pr Using an audio cable not included connect the left right AUDIO OUT jack on your unit to the AUDIO IN jack on your other source ANALOG CONNECTION Amplifier of stereo system etc L R ANALOG Ome i Audio cable red and white 7 D g white DRC3OOIH Notes Using a coaxial digital audio cable not included connect the DIGITAL AUDIO OUT jack on your unit to the DIGITAL AUDIO IN jack on your other source DIGITAL CONNECTION Audio equipment with digital audio input jack DIGITAL AUDIO IN Coaxial Digital DRC300iIH When you connect the unit to other equipment be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections e Ifthe external equipment is television and this audio system is close to it you may experience
6. Library directly from your iPod will appear on the screen 2 Touch the Photos selection on iPod panel and then select the photo your prefer Step 2 Step 3 Step 4 Poe 3 Touch the B to confirm the photo 4 Depending on the video output setting of your iPod you may need to tap yes on your iPod screen to activate iPod s video output 5 Press RETURN button to end the photo viewing and go back to the previous menu Using an iPod Classic iPod Nano to view photos 1 IniPod Home menu use the W A button to select Photos and press the OK button Navigate your iPod Photo Library directly from your iPod will appear on the screen Step 3 Step 4 All Photos 2 Press the W A button to select Photos and then press the OK button to confirm 3 Use the A V lt P button to select a photo press the OK button to begin playback 4 Press OK button twice to activate photo showing to TV screen 5 Press RETURN button to end the photo viewing and go back to the previous menu 6 Press the CLEAR button to exit Photo Mode Note vee E Make sure video out is activated in the setting of iPod Classic or iPod moe od Nano is Be Subtitles ott l Docking System for iPod f i Playing Videos 1 In iPod iPhone Home menu use the W A button to select Videos and press the OK button 2 Use the W A button to select from Movies Music Videos TV Shows Video Podcasts or Rentals press the OK but
7. QA tracks programmed on a DVD or to select 7 lt the audio output mode on an audio CD 8 lt fe SETUP AND CONNECTIONS CONNECTING TO A TV The unit can be connected to your TV in several different ways depending on the design of your TV Note Use only one of the connection methods listed below for connecting to your TV Method A AV jacks will give good picture quality Method B Component Video will give better picture quality Method C HDMI will give best picture quality A RCA AUDIO VIDEO JACKS 1 Using the red white and yellow connection on the AV cable included connect the VIDEO OUT and left right AUDIO OUT 2 Using a S video cable notincluded S Video will give slightly better picture quality than a standard yellow RCA type AV connection If your TV has an S Video connection you 4 ANGLE Button lt v gt Press to switch the camera angle of the 9 ILS 22 video presentation when scenes with 10 m eee multiple camera angles are recorded on 11 a DVD 13 12 5 MEMORY Button Press to create programs 6 DISPLAY Button 14 Press to change disc status information displayed on the TV screen 7 SETUP Button 15 Press to open and close the SETUP menu screen 8 CURSOR A V lt P Button JL J Press to highlight selections on a menu lt screen and adjust certain settings OK Button Press to return to the previous menu in Press to confi
8. automatically played in letterbox mode black bands top and bottom 4 3 LB Letter Box When wide screen video is played in this mode on a conventional Analog TV black bands appear at the top and bottom of the screen 16 9 Wide screen This is the correct mode for playing wide screen videos on on a wide screen TV most modern Digital TV s Note e The displayable picture size is determined by the DVD disc Therefore the playback picture of some DVD discs may not conform to the picture size you select When you play DVD discs recorded in the 4 3 aspect ratio the playback picture will always appears in the 4 3 aspect ratio regardless of the TV TYPE setting PAN SCAN ly gt Bp Dy LETTER BOX DEFAULT WIDE SCREEN It takes 3 5 seconds to reset the unit to the factory default LANGUAGE SETUP 1 Press the SETUP button in DVD mode 2 Use button to select Language Setup 3 Use A V lt 4 or P button to select a language then press the OK button The screen will change to your selected language immediately 4 To exit the SETUP MENU and return to the normal screen press the RETURN or SETUP button Note e Some DVDs may not play in the audio language selected A prior language may be programmed on the disc Some DVDs may be set to display subtitles in a language other than the one you selected A different subtitle language may be programmed on the disc Some DVDs allow you to change subtitle sele
9. expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Notes on Copyright It is forbidden by law to copy broadcast show broadcast on cable play in public or rent copyrighted material without permission Apparatus Claims of U S Patent Nos 6 836 549 6 381 747 7 050 698 6 516 132 and 5 583 936 licensed for limited viewing uses only This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited Aiia Should any trouble occur disconnect the AC power cord and refer servicing to a qualified technician To be completely disconnected the apparatus from supply mains the mains plug of the apparatus shall be disconnected from the mains socket outlet completely The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use IMPORTANT SAFETY INSTRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturer s instru
10. gt PLAY button to return to normal playback speed SF 1 2 SF 1 3 SF 1 4 SF 1 5 t T play sre S16 Audio Selection DVD On some DVDs the sound is recorded in two or more formats Follow the directions below to select the preferred language and sound system 1 While a disc is playing press the AUDIO button to O i 1 ENGLISH 005 1CH show the current audio format eg 5 1 or 2 channel 2 Press the AUDIO button repeatedly to select the desired audio format Note e If only one audio format is recorded on the DVD the AUDIO button becomes an invalid key and will be displayed Some DVDs allow you to change audio selections only via the disc menu If this is the case press the MENU button and choose the appropriate language on the disc menu You can select different audio channels Stereo Mono L Mono R or Mix Mono on an Audio CD by pressing the AUDIO button repeatedly Subtitle Selection DVD 1 While a DVD is playing press the SUBTITLE button to display the current language setting as shown in the example 2 Press the SUBTITLE button repeatedly to select the P E desired subtitle language Note Some DVDs are set to display subtitles automatically and you cannot turn them off even if you set the subtitle function to off e During some scenes the subtitles may not appear immediately after you select your desired scene The number of subtitle languages recorded differs depending on the disc
11. the interference if the tuner function is selected while the television is working e Refer to the instruction manual of the connected equipment as well 5 10 6 2009 9 45 13 AM PLAYING A DISC pvb ED This user manual explains the basic instructions for operating this unit Some DVDs are produced in a manner that allows specific or limited operation during playback Therefore this unit may not respond to all operating commands THIS IS NOT A DEFECT Please refer to the instructions accompanying the specific DVD in question for more information about the options available on that DVD may appear on the screen during operation It means that the desired operation is not permitted by the unit or disc Playing a Disc 1 Press the STANDBY ON button to turn on the unit See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2 2 Press the amp OPEN CLOSE button to open the disc tray 3 Place a disc onto the disc tray with the label side up 4 Press the amp OPEN CLOSE button to close the disc tray It takes a short while for your unit to load the disc After loading for most DVDs the unit will automatically take you main menu or start playing 5 If the unit does not automatically start playing the DVD press the B gt PLAY button Pausing Playback Still Mode Press the II PAUSE button on the remote Each time you press the II PAUSE button the picture advances one frame To resume normal playback press the B g
12. IS UNIT operating and maintenance servicing CAUTION TO PREVENT ELECTRIC SHOCK I The exclamation point within instructions in this user manual CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO BEAM CLASS 1 LASER PRODUCT On Placement e Do not use the unit in places that are extremely hot cold dusty or humid e The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc On Safety e When connecting or disconnecting the AC power cord grip the plug and not the cord itself Pulling the cord may damage it and create a hazard e When you are not going to use the unit for a long period of time disconnect the AC power cord e No naked flame sources such as lighted candles should be placed on the AC power cord and the unit e Leave a minimum of 10 cm around the apparatus for ventilation e Attention should be drawn to the environmental aspects of battery disposal e Use of apparatus in moderate climates On Condensation e When left in a heated room where it is warm and damp water droplets or condensation may form inside the unit When there is condensation inside the unit the unit may not function normally Let the unit stand for 1 to 2 hours before turning the power on or gradually heat the room and let the unit dry before use Rating Plate Location e The rating plate is located on
13. If only one language is recorded the language does not change e This function can only be used for discs on which subtitles have been recorded in multiple languages Some DVDs allow you to change subtitles only via the disc menu If this is the case press the MENU button and choose the appropriate subtitle on the disc menu 1 ENGLISH Angle Selection oe Some DVDs contain scenes which have been shot from a number of different angles For these discs 2 9 the same scene can be viewed from each of these different angles 1 While you are playing a DVD with different angles recorded press the ANGLE button to view the number of current angles available 2 Press the ANGLE button repeatedly to change the scene to the next recorded angle e After approx two seconds playback will continue from the new angle you selected e If no button is pressed within 10 seconds playback continues without changing the current angle Note e This function can only be used for discs on which scenes shot from multiple angles have been recorded e If only one angle is recorded PY OFF is displayed Sequence of angle shots Example DRC300iH eng ib indd 2 Zooming into an image pyp While a disc is playing press the ZOOM button repeatedly to enlarge the image in several levels While an image is zoomed you can use the A V lt or CURSOR button to shift the view and display the part you want e To return to normal view
14. below For TVs that support it HDMI can provide the best quality audio and video output depending on media source and so is the preferred connection type The HDMI cable incorporates both audio and video signals so you will have just one cable running from the unit to your TV 480P progressive 720P progressive 1080i interlace 1080P progressive age Refer to your TV Owner s Manual to the determine the maximum resolution your TV can support If the picture quality or colors on TV appear distorted you may have set the output resolution on the DVD player to too high a value When you connect the DVD player to your TV be sure to turn off the power and unplug both units from the wall outlet before making any connections If you have a HDMI with HDCP equipped monitor or display you can connect it to this player using an HDMI cable Using an HDMI cable not included connect the HDMI OUT jack on your unit to the HDMI IN jack on your TV or HDMI compatible display Q 5 HDMI i Set the output resolution using the HDMI button on the remote control to match the maximum resolution of your TV When using HDMI connection to HDMI TV please set the DIGITAL AUDIO under Audio Setup menu to be PCM STEREO HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC CONNECTING TO OPTIONAL EQUIPMENT AMPLIFIER or HOME THEATER A ANALOG CONNECTION B
15. ctions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety When the provided plug does not fit into your AC power outlet consult an electrician for replacement of the obsolete outlet 10 Protect the AC power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus NOQAN 11 Only use attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over LAL Portable Cart Warning 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as the AC power cord or plug is damaged liquid has spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normal
16. ctions only via the disc menu If this is the case press the MENU button and choose the appropriate subtitle language from the selection on the disc menu Some DVDs may not include your pre selected language In this case the DVD player automatically displays disc menus consistent with the disc s initial language setting SETUP MENU LANG AUDIO LANG SUBTITLE LANG DISC MENU LANG fd AUDIO SETUP 1 Press the SETUP button in DVD mode 2 Select Audio Setup in the main menu using the lt or gt buttons 3 Select a menu option using the A V lt 4 or gt buttons and press OK button DIGITAL AUDIO DIGITAL AUDIO Select the Digital Audio Output format that matches your audio system s capabilities If your audio system supports Dolby Digital surround sound you should select RAW DVD FORMAT setting If your system only supports Stereo or if you re using your TV s stereo speakers for audio playback then you select PCM STEREO setting Note you ll only experience full surround sound if you use the COAXIAL Digital Audio output and have selected RAW DVD FORMAT setting Please also note that not all DVD s have surround sound audio tracks If using HDMI connection to TV for Video AND Audio playback you should select PCM STEREO setting so as to ensure a stereo not surround sound signal is passed to your TV s speakers VIDEO SETUP 1 Press the SETUP button in DVD mode 2 Select Video Se
17. eat single track or whole CD Press to repeat songs albums from your iPod iPhone 4 678 1 DISC TRAY 6 OPEN CLOSE Button Opens or closes the tray by pressing the Opens or closes the tray OPEN CLOSE button 7 PLAY Button 2 REMOTE SENSOR Starts or resumes playback of a disc Receives the remote control unit signals 8 STOP Button 3 DISPLAY WINDOW Stop playing a disc jacks on the unit to the VIDEO IN and left right AUDIO IN jacks on your TV may prefer to use this connection L R ANALOG AV cable __ included DRCSOOIH IXIAL DIGITAL HDMI OUT B COMPONENT VIDEO OUT DVD Some TVs or monitors are equipped with component video inputs Using the red and white connection on an audio cable not included connect the left right AUDIO OUT jacks on your unit to the Component left right AUDIO IN jacks on your TV video cable Using a component video cable not green blue red included connect the Y VIDEO OUT jack green plug on your unit to the Y VIDEO IN jack on your TV the Pb VIDEO OUT jack blue plug on your unit to the Pb VIDEO IN jack on your TV and the Pr VIDEO OUT jack red plug on your unit to the Pr VIDEO IN jack on your TV to view the highest quality picture playback C CONNECTING TO A DISPLAY Using an HDMI cable Press the HDMI button on the remote control to change output signals as
18. ed via the remote control Please Navigate directly on your iPod OR Press The CLEAR Key to go back to main menu If the above screen appears you may need to control the iPod Library directly from your iPod iPhone Note If your iPhone is called while it is docked playback will be paused iPod is a trademark of Apple Computer Inc registered in the U S and other countries CUSTOMIZING THE FUNCTION SETTINGS There are four options in the main setup menu System Setup Language Setup Audio Setup and Video Setup In DVD mode press SETUP to bring up the main menu Select one of the menu icons across the top of the screen using the lt or P buttons The menu s options are displayed on the left side of the screen Press the A V lt or P buttons to move to the option s choices on the right Then press OK to select Press SETUP or RETURN if you want to exit SYSTEM SETUP 1 Press the SETUP button in DVD mode HD OUTPUT 2 Select System Setup in the main menu using the A V dor P ANALOG VIDEO buttons TV TYPE 3 Select a menu option using the A or W buttons and press OK DEFAULT button VIDEO OUTPUT HD OUTPUT ANALOG VIDEO This allows to you pick the video output and video resolution that best suits your TV s capabilities Note Not all video outputs are operational for all video settings the Composite Video Out YELLOW jack is active for all video settings we STRONGLY recommend you connect t
19. he recommended operating range for remote operation is about 16 feet 5 meters 1 Open the battery door Battery Replacement When the batteries become weak the Operating distance of the remote control will be greatly reduced and you will need to replace the batteries Notes e Ifthe remote control is not going to be used for a long time remove the batteries to avoid damage caused by battery leakage corrosion e When discarding batteries environmental problems must be considered and local rules or laws governing the disposal of these batteries must be strictly followed e Do not mix old and new batteries Do not mix ALKALINE standard CARBON ZINC or rechargeable Ni Cd Ni MH etc batteries TROUBLESHOOTING GUIDE WARNING e Do not dispose of the battery in fire or it may explode or leak e Batteries shall not be exposed to excessive heat such as sunshine fire or the like CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type SYMPTOM CAUSE AND REMEDY No power e Ensure the AC power cord is connected e The unit is not turned on The remote Remove any obstacles between the remote and the unit control does not Use the remote near the unit function e Point the remote at the remote sensor on the unit Replace the batteries in the remote with new one No sound or only Make sure that you select ON mode a very low level The system is in pau
20. his jack to your TV using the AV cable included with this product even if you intend to use a different connection for normal viewing If you find you lose video by enabling a particular unsupported setting when using a connection other than Composite Video Out simply switch your TV to the AV input that you ve connected the AV cable to then continue with your Video Menu setup activity If using digital HDMI connection recommended you should pick the resolution 480p 720p 1080i 1080p that matches the capabilities on your TV If using analog video connection Composite Video AV S Video or Component Video you must select 480p resolution under HDMI settings There are three analog video settings INTERLACE YUV Select if you are connecting the player with Component Video outputs to a non Progressive Scan TV Select if you are connecting the player with Component Video outputs to a Progressive Scan TV Select if you are connecting the player with S VIDEO output to a TV with S VIDEO input P SCAN YPbPr S VIDEO TV TYPE Depending on the format of the DVD you can choose the picture format aspect ratio best suited to the format of your TV screen Cut off when a wide 4 3 PS Pan Scan screen video image is When wide screen video is played this mode clips the right and left Played sides of the image so that it can be viewed on a conventional screen Some wide screen DVDs that do not permit Pan Scan mode playback are
21. ided into tracks A track is usually one song on an Audio CD VIDEO Note Numbers identify each title chapter and track on a disc Most discs have these numbers recorded on them but some do not Notes on Unauthorized Discs You may not be able to play some DVDs on this unit particularly if they were purchased from outside your geographic area or made for business purposes SOUND SYSTEM Dolby Digital Dolby Digital is a technology developed by Dolby Laboratories Soundtracks encoded in Dolby Digital can reproduce from one to 5 1 discrete channels of excellent quality audio The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two channel listening An additional Dolby Digital decoder is required for reproduction of the discrete multi channel soundtracks available on many DVDs Q DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Please check and identify the supplied accessories C Remote Control with batteries Audio Video cable Need more help Please visit online help at www RCAav com REMOTE CONTROL To Change Remote Batteries Using the Remote Control e Point the remote control at the REMOTE SENSOR located on the unit e When using this unit in very bright light the infrared REMOTE CONTROL SENSOR may not work properly e T
22. ly or has been dropped DISC FORMATS The unit can playback DVD ovos VIDEO 8cem 12cm disc Region Management Information This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs If the region number printed on the DVD does not correspond to the region number of this unit it cannot play that disc The region number of this unit is 1 Disc Function or Operation that is Not Available When the E7 appears on the screen it indicates that the function or operation attempted is not available at that time This occurs because the DVD manufacturer determines the specific functions of DVDs Certain functions may not be available on some DVDs Be sure to read the documentation provided with the DVD Icons Used on DVDs Sample Icons Note When playing back a CD G Graphics or CD EXTRA disc the audio portion will be played but the graphic images will not be shown 1 English 2 French 1 English sons 2 French Language selections for audio Language selections for subtitles Screen aspect ratio Multiple camera angles Region code indicator OSC DIGITAL AUDIO CD R CD RW Compatible Audio CDs 8cm 12cm disc ua Chapter and Tracks DVDs are divided into titles and chapters If the disc has more than one movie on it each movie would be a separate title Chapters are sections of titles Audio CDs are div
23. playing the beginning of the first picture file These files will then be played back one by one Press lt or P button to select a picture file to view Press the A V lt or CURSOR button to view and select the files that you want to view then press the OK button to confirm the selected file Folders Files within the current folder O 0 Note You can press the II PAUSE button to interrupt playback and press the B gt PLAY button to resume playback e You can use the GOTO function or use the numbered buttons to enter the number of a picture file to quickly select the image Press the ANGLE button on the remote control to rotate the picture orientation by 90 iPod iPhone FEATURES Connecting your iPod iPhone 1 Insert your iPod iPhone into the connector in the dock 2 Press the SOURCE button to select iPod iPhone mode the iPod iPhone Home menu appears Your iPod iPhone will connect automatically within a few seconds Note Your iPod iPhone will be charged automatically until fully charged once it is connected no matter whether the unit is in iPod iPhone mode or not Playing Music 1 In iPod iPhone Home menu use the W A button to select Music and press the OK button 2 Use the W A button to select from Playlists Artists Albums Songs Genres or Composers Press the OK button to enter 3 Use the W A button to navigate the iPod menu lists and select songs press the OK button to begin playback
24. press the ZOOM button until the ZOOM OFF shows The screen will return to normal When you reach the edge of the image the display will not shift anymore in that direction Display Function While the disc is playing press the DISPLAY button on the remote control repeatedly to display information on operation status Gi 2vD TT 1 21 CH 6 29 00 07 18 Elapsed Time Elapsed time from the beginning of the 1 3ENG DOD 6CH OFF P OFF chapter title which is currently playing Chapter Remaining time Remaining Time Remaining time of the chapter title 22 T 1 21 CH 6 29 C 00 12 03 which is currently playing Title Elapsed time BvD TT 1 21 CH 6 29 T 00 30 15 Total time beaded I U CH 6 29 LOCATING A DESIRED SECTION T 02 01 22 pvb ED Locating a specific chapter track PVP If you know the chapter track number you want to play you can locate a specifc chapter track by directly selecting a chapter track number 1 Press the GOTO button to search your e22 TRK jo 12 p lt Cx 00 00 00 desired chapter track 2 Press or P button to highlight a chapter track and press the corresponding number button s for the chapter you want 3 Press the OK button to confirm The unit will start playback about 3 seconds later Locating a specific title If a DVD disc contains title numbers you can locate a specific title by directly selecting a title number 1 In stop mode press the GOTO button
25. rm selections on a menu iPod iPhone mode screen 20 TITLE Button 9 CLEAR Button Press to open the title menu screen Clear input selections and cancel certain 21 MENU Button playback functions Press to open or close the DVD s menu Press to select iPod s Remote UI mode 22 HDMI Button or Extended Interface mode Press once to view current HDMI output 10 PLAY Button resolution Press repeatedly to change Press to start playback resolution 480P 720P 1080i or 11 m STOP Button 1080P Press to stop playback 23 II PAUSE Button 12 lt 41 SEARCH Button Press to pause playback frame Fast reverse playback advance 13 Kd REV Button 24 gt gt SEARCH Button Press to move backwards through titles Fast forward playback chapters or tracks on a disc 25 gt gt I NEXT Button 14 Number 0 9 Buttons Press to move forward through titles 15 A B REPEAT Button chapters or tracks on a disc Press to perform point to point repeat 26 SLOW Button playback on a DVD or CD Press to perform slow forward playback 16 SOURCE Button of DVDs Selects input sources 27 GOTO Button 17 SUBTITLE Button Press to skip directly to a specific location Press to select one of the subtitle on a DVD languages programmed on a DVD 28 DISC REPEAT Button 18 ZOOM Button Zoom in an image 19 RETURN Button Press to return to the normal operation after using the SETUP button Unit Press to repeat chapter or title of a DVD Press to rep
26. se mode Press the PLAY button to return to sound is heard normal play mode e The unit is in fast forward or fast reverse mode Press the B gt PLAY button to return to normal play mode e Make sure the AUDIO output is correct e Make sure the audio cable is connected securely The region number of the disc doesn t match the region number of E EERE The TV is not set to receive DVD signal output The video HDMI cable is not connected securely The TV is not turned on e Clean the disc No output on your Check connection between HDMI TV and the unit HDMI TV e Replace the HDMI cable with a better one Bad HDMI cable can cause data lost e Press HDMI key on remote handset several times to toggle among different HD OUTPUT Severe hum or Check the connections noise is heard The plugs and jacks are dirty Wipe them with a cloth slightly moistened with alcohol Clean the disc The disc does not There is no disc inside No Disc appears on the screen play e Insert the disc correctly with the playback side facing down e Clean the disc e The unit and disc region number are incompatible e Condensation may have formed inside the unit due to a sudden change in temperature Wait about an hour for it to clear and try again Reset the unit press the STANDBY ON button to turn off the unit wait for a few seconds then restart the unit No picture or abnormal color The DVD door cannot open MAINTENANCE
27. t PLAY button Stopping Playback e Press the W STOP button at the spot where you want to interrupt playback To resume playback at the spot where the disc was stopped press the B gt PLAY button If you press the W STOP button twice the unit s memory will be cleared and pressing the B gt PLAY button will reset the disc to the beginning Fast Forward Fast Reverse 1 Press the SEARCH gt or SEARCH lt button when a disc is playing Each time you press the SEARCH gt or SEARCH lt lt button the playback speed changes in the following sequence 2 Press the B gt PLAY button when you reach the desired point to resume normal playback PLAY gt FORWARD x2 gt FORWARD x4 PLAY gt BACKWARD x2 gt BACKWARD x4 t FORWARD x20 lt FORWARD x8 _ BACKWARD x20 lt BACKWARD x8 Note e The unit mutes sound and subtitles during reverse and forward scan of DVDs e The fast playback speed may differ depending on the disc Skipping to a Different Chapter Title Press the k lt PREV button to go back to current or previous chapters tracks Press the gt gt I NEXT button to advance chapters tracks e For audio CDs use the number buttons on the remote control to jump immediately to the desired track number Slow motion Play a 1 Press the SLOW button on the remote in play mode Each time the SLOW button is pressed the speed of slow motion playback changes in the following sequence 2 Press the B
28. t operate in scenes where different camera angles are recorded PROGRAMMABLE MEMORY The two types of programmed playback provided by this unit are title chapter programmed playback and track programmed playback Title Chapter programmed playback DVD Title Chapter 1 Press the MEMORY button 2 Enter the title numbers in EZ Use gt button to move the highlight to chapter and enter the chapter numbers in BE 3 Use A V lt or P button to move to the other field 4 Repeat steps 2 to 3 5 Press the B PLAY button to start the programmed playback Note If you press the STOP button twice the programmed selection will be cleared Track PROGRAM PLAY CLEAR Track programmed playback Coe Press the MEMORY button Enter the track numbers in BE Use A V lt r P button to other field Repeat steps 2 to 3 Press the B PLAY button to start the programmed playback akWND PROGRAM PLAY CLEAR Cb PLAYING PICTURE FILE DISC This unit can play picture files recorded on CD R and CD RW discs Playing a Picture File Disc OscNoasi JPG 1 169 1 Open the disc door ieee 2 Place a picture file disc onto the tray with label side up QB 01 2005 06 08 001 DSCNO2B4 3 Close the disc door onaoosoeoo Z ooroscnozes j i 01 2005 06 10 001 DSCN0287 4 The unit will load the disc and automatically display the Sevens 001 DSCN0290 z contents of the disc on the screen while
29. the rear of unit FCC Statements NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment DRC300iH eng ib indd 1 The symbol for Class Insulation MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF POWER OUTLET THEN FULLY INSERT THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES 003 This product contains a low power laser device II Double does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Warning Changes or modifications to this unit not
30. ton to enter Navigate your iPod iPhone Video Library directly from your iPod iPhone may appear on the screen if your are using an iPod Settings Touch 3 Use the W A button to navigate the iPod iPhone menu lists and select a video press the OK button to begin playback You may also use the control wheel and keys on your iPod iPhone to operate it Press the II PAUSE button to pause press the gt PLAY button to resume Press the I lt gt gt I button to skip to the previous next movie Press the lt lt gt gt button to begin fast reverse forward press the gt PLAY button to resume normal playback 4 Press the RETURN button to go back to the previous menu Note Make sure TV Out in iPod is set to ON when you are playing the video Music Settings 1 In iPod iPhone Home menu use the W A button to select Settings and press the OK button 2 Use the W A button to select from Shuffle Repeat or Lanuage Press the OK button to enter the settings 3 Use the W A button to a setting press the OK Videos button to confirm 4 Press the RETURN button to go back to the previous menu e Shuffle Select from Shuffle Off Shuffle Songs and Shuffle Albums Repeat Select from Repeat Off Repeat One and Repeat All Language Select OSD language Docking System for iPod _ Settings WARNING Due to the iPod iPhone limitation not all functions of some iPod iPhone models can be controll
31. tup in the main menu using the lt or gt BRIGHTNESS buttons CONTRAST 3 Select Brightness Contrast Hue Saturation or Sharpness HUE using the A or W buttons highlight your selections and SATURATION press OK button SHARPNESS Specifications and external appearance are subject to change without notice Printed in China 811 793091W010 10 10 6 2009 9 45 27 an
32. utton until the REP OFF indicator displays on the screen You can play a single track and whole disc repeatedly Repeating a single track You can play the same track repeatedly 1 While the disc is playing press the REPEAT DISC button until the REP REP 1 indicator displays on the screen The current track is played repeatedly Repeating a whole disc 2 While the disc is playing press the REPEAT DISC button until the REP REP ALL indicator displays on the screen The whole disc is played repeatedly To resume normal playback 3 Press the REPEAT DISC button until the REP OFF indicator displays on the screen You can play a specific section repeatedly Repeating a specific section 1 While the disc is playing press the REPEAT A B button at the beginning of the section REPEAT A is displayed you want to play repeatedly 2 Press the REPEAT A B button again at the end of the section REPEAT A B is displayed 3 The unit will immediately begin replaying your selection To resume normal playback 4 While the disc is playing press the REPEAT A B button until the A B CANCEL indicator displays on the screen Note e Some discs may not permit A B repeat operation A B repeat can only be used within the same title If the start and end of the section to be repeated are in different titles A B repeat is cancelled e You can specify a segment only within the current title or track e The A B repeat function does no
Download Pdf Manuals
Related Search