Philips 800 CD Player User Manual
Contents
1. Advanced Quality Speakerphone e No Battery Required Message Backup e Voice Time Day Stamp for Messages e Complete Voicehelp Setup and Operation United States Guarantee Terms Dear Customer Thank you for purchasing a Philips Consumer Communications product We hope that it makes your life easier Philips Consumer Communications warrants to the original retail purchaser that the SKIP800 and all accessories provided by Philips in the sales of this product are free from defects in material and workmanship under normral installation and use according to the following terms and conditions This limited warranty extends only to the Consumer for products purchased and used in the USA 2 The limited warranty for the Product extends for twelve 12 months from the date of purchase of the Product by the Consumer 3 During the applicable limited warranty period Philips appointed service network will repair or replace at Philips option any defective parts or Product with new or refurbished replacement items and return the Product to the Customer in working condition No charge will be made for either parts or labor in repairing equipment Repaired or replacement Product is warranted for the balance of the warranty period 4 The Consumer must provide information to reasonably prove the date of purchase upon request so please retain your sales receipt 5 Transportation delivery and handling charges incu2. and the reception or operational problems caused by signal conditions network reliability or cable antenna systems Finally the product purchased used serviced or shipped from outside the USA or used for com mercial or institutional purposes including but not limited to product used for rental purposes If order to avoid unnecesssary inconvenience we advise you to read the operating instructions before contacting your dealer If you have any comments questions or difficulties regarding this product Please contact the pic consumer help desk at 800 059 0817 If you experience trouble with this telephone equipment please contact the following address and phone number for information on obtaining service or repairs The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning This equipment may not be used on coin service provided by the telephone company Connection to party lines is subject to state tariffs Philips Consumer Help Desk Phone 1 800 659 0817 Fax 423 475 0411401 Company Philips Consumer Communications Gantz Road Suite C Grove City OH 43123 S PHILIPS 3140 025 20323
3. Thank you for your decision to purchase the Skip800 digital answering system from Philips We are confident that you will experience the efficiency and quality set by the Philip s standard All of the necessary items for your installation and use are included in this package one base unit one handset one user manual one AC AC power adaptor 9V one handset cord one telephone line cord Description of features ABAABBABEB do amp deedaees OGD l 0 lt a lop x o gt Memo 2 way Record Button I1 Play Stop Button 2 Answer Record Button 12 Message Indicator 3 Answer Only Button 13 Memory Buttons 4 Set Button 14 Redial Pause Button 5 Info button I5 Flash Button 6 Display 16 Store Button 7 Answerer On Off Button I7 Dialing Button 8 Rewind Button 18 Speaker Button Indicator 9 Forward Button 19 Speaker Volume Control l 0 Message Delete The Icons speaker volume d 44 information required message indicator envelop answer record mode answer only mode press Info button call timer G store gt Seen ringer off Indicator Installation AC AC power adatpor Handset cord For set up assistance follow the voice prompt closely and refer to this manual when necessary Marter SETTING UP YOUR SKIP 800 For immediate access to various settings press the Info button located under the door
4. above the LCD Press once to set the time and day 2 times to set the day time stamp announcement 3 times to set the answer delay or toll saver feature 4 times to set the remote code e 5 times to listen to the telephone setting guidance Setting the time and day Set the hour first followed by the minute then the day Setting the time day stamp announcement If the time the day is not set the time day stamp announcement will not be included in the messages even if it is turned on s gt OA gt O Setting the answer delay or feature answer delay You may set the number of rings before the answering machine answers a call toll save feature when calling your own telephone number this feature allows you time to hang up and save calling charges When there are unplayed messages your telephone will answer at the second ring When there are no unplayed messages it will not answer until the fifth ring D gt uO gt Setting the remote code When using the answering machine for the first time the remote code is 0000 For the sake of security record and use your own remote code Qa 6 note if the setting procedure is not complete the old remote code will be restored for security purpose this answering machine is programmed in such a way that the remote code will not be accidentally announced If it so happens that you forgot your recorded remote code record a new one Info Recording Outgo
5. entry is successful a long beep will be heard You will hear messages and can proceed to enter commands to your answering machine If 3 short beeps are heard enter remote code again If failed for 3 trials the answering machine will hang up If silence maintains for 7 seconds the anwering machine will hang up To Change your out going message press 8 While listening to the message playback you can do the following Press to skip back to the previous message Press 7 to repeat the current message Press 8 to play or stop message playback Press g to skip forward to the next message Press to erase the message being played The Help commands Press Press to switch to Answer Record mode Press to switch to Answer Only mode Press to switch to Answer Off and to release the line immediately Press 4 to record Answer Record press again to stop Press to record Answer Only out going message press again to stop Press 8 to play message or to stop Play g P Remote Playback Pause When no commands are given for up to 3 minutes the voice will announce to continue please press 8 If there are still no commands entered the answering machine will hang up But if you press the playback will continue Screening an incoming call This feature allows you to either choose to answer or to ignore the calling party When the caller is recording his her message you can te
6. ing Message There are 2 types of outgoing messages Answer Record the answering machine will both answer and record messages Answer Only the answering machine will only answer without recording any messages To switch on or off the outgoing message mode press To record Answer Record message You have 60 seconds to record If your outgoing message is less than 3 seconds it will not be recorded Ans Record You will hear G O gt the outgoing message A playback Press amp release after the beep then speak To record your Answer Only message You have 3 minutes to record If your outgoing message is less than 3 seconds it will not be recorded Ans Only You will hear a O E gt the outgoing message A playback Press amp release after the beep then speak note The default outgoing messages are always in the telephone and can al ways be used if your recorded outgoing messages are removed or if you want to replace them In case of memory full the answering machine will switch from Answer Record Mode to Answer Only Mode Automatically Reviewing outgoing messages Ans Ans Record Only JQ for Answer Record message LIO for Answer Only message To erase your recorded outgoing messages Ans Record Ans Only Recording a memo You can leave message for your household members with this feature You have 3 minutes to record press Play Stop when you have finished If you exceed the 3 minutes the
7. machine will stop recording Memo l gt E Press amp release after the beep then speak Recording a telephone conversation 2 way recording While you are having a telephone conversation you can also record it The machine will stop recording when has expired O Recording incoming Messages Make sure the unit is in the Answer Record mode 45 The following conditions will terminate your incoming message recording Memo 2 way Press amp release after the beep The maximum time allowed 3 minutes is exceeded A beep tone will be heard e There is a silence of more than 7 seconds A beep tone will be heard You answer the call before the call is complete refer to Screening an incoming call e Memory is full Listening to recorded messages There are 2 types of messages Stored messages These are messages that have been played back completely The Status indicator lights up but does not blink New messages New messages are messages that are unplayed or not played back completely The Status indicator will blink Reviewing new messages sk OnO amp Adjust to a Press to stop comfortable the message level playback Listening to old messages Repeat the steps as in Listening to new messages Mutual listening of recorded messages During phone conversation both you and your caller can listen to the recorded messages a You will hear the message and can continue the conve
8. ntain uninterrupted telephone service This equipment complies with Part 68 of the FCC Rules On the base unit of hte equipment is a label that contains among other information the FCC Registration Number and Ringer Equivalence Number REN for this equipment If Requested this information must be given to the Telephone Company The REN is useful to determine the quantity of device you may connrct to your telephone line and still have all of those device ring when your telephone number is called In most but not all areas the sum of the REN s of all devices connected to one line should not exceed five 5 0 To be certain of the number of devices you may connect to your line as determined by the REN you should contact your local telephone company to determine the maximum REN for your calling area If your equipment causes harm to the telephone network the telephone company may discontinue your service temporarily If possible they will notify you in advance But if advance notice isn t practical you will be notified as soon as possible You will be informed of your right to file a complain with the FCC Your telephone company may make changes in its facilities equipment operations or procedures that could affect the proper functioning of your equipment If they do you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service skip 800 Feature Telephone with LCD and Fully Digital Answering System
9. ovided Technical Specifications Power Requirements 9V AC 400mA Number of messages ICM or Memo 32 max OGMI OGM2 Memory Capacity total recording time approximately 14 minutes SAFETY PRECAUTION e Make sure the power plug is near the telephone as the only way to disconnect the telephone from the power mains is by unplugging the power adaptor Connection to the electric mains 110 volts monophase alternating current with the exception of installation with IT diagram described in standard EN 60 950 Please not The mains voltage falls under the category of very hight voltage according to the criteria of standard EN 41 003 Connection to the telephone network the voltage in this network falls under the category of TRT telephone network valtage according to the standard EN 41 003 This product is intended for indoor use only TROUBLESHOOTING PROBLEMS No display The loudspeaker pro duces no sound CAUSES Power is not properly connected Power is not properly connected The volume control is in the lowest position SOLUTIONS Securely plug the power adaptor into the wall socket and the proper jack on the telephone Securely plug the power adaptor into the wall socket and the proper jack on the telephone Turn the volume up by pressing No dial tone Call is disconnected when R is pressed Telephone line cord not securely plugged in
10. res after 30 seconds If not successful please unplug the power and call your local PHILIPS Service Center FCC REQUIREMENTS 1800 XXXX This equipment complies with Part 68 of the FCC Rules On the base unit of this equipment is a label that contains among other information the FCC Registration Number and Ringer Equivalence Number REN for this equipment If Requested this information must be given to the Telephone Company The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those device ring when your telephone number is called In most but not all areas the sum of the REN s of all devices connected to one line should not exceed five 5 0 To be certain of the number of devices you may connect to your line as determined by the REN you should contact your local telephone company to determine the maximum REN for your calling area If your equipment causes harm to the telephone network the telephone company may discontinue your service temporarily If possible they will notify you in advance But if advance notice isn t practical you will be notified as soon as possible You will be informed of your right to file a complaint with the FCC Your telephone company may make changes in its facilities equipment operations or procedures that could affect the proper functioning of your equipment If they do you will be notified in advance to give you an opportunity to mai
11. rminate the answering machine by taking the call But if there are many telephones connected in parallel to the answering machine it is possible that recording will continue even when one of the connected telephones is already engaged In this case you can either press on the answering machine or press on the engaged telephone USING THIS FEATURES OF YOUR SKIP 800 TELEPHONE Setting the Dialing Mode Mixed mode dialing PULSE TONE If your telephone is set to or using the Pulse mode pressing the amp button will temporarily convert your telephone to the tone mode the telephone will automatically reset back to Pulse mode when the call is terminated Setting the Ringer gt OO gt Press consecutively to choose your ringer To switch off the ringer Note that during power failure the telephone will ring even if set to ringer off mode But after power up 4 mode will be restored D gt O gt OPO Storing telephone numbers in the 5 memory storage OO Telephone number note Insert a pause wherever necessary by pressing G3 A pause lasts for 2 5 seconds If you need a longer pause press G3 as many times as you wish The pause duration will accumulate according to the number of times is pressed A telephone number may not consists of more than 24 digits including pauses otherwise it cannot be stored under one memory location Erasing memories General Note During power failure
12. rred in the transport of Products to and from the service location are to be paid by the Customer 6 ANY OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO THE LIMITED WARRANTIES MER CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED Some states do not allow disclaimers of implied warrants so the above limitation may not apply to you This warranty gives you specific legal rights You may have other rights which vary from state to state 7 Philips total liability for damages relating to or arising out of the use of the product regardless of the type or cause of such damage shall not exceed the original purchase price paid for the product In no event shall PCC be liable for any indirect special incidental or consequential damages including but not limited to lost profits or revenue inability to use the product or other associated equipment cost of substitute equipment and any claims by other parties resulting from the use of the product Some states do not allow the exclusion of limitation of incidental or consequential damages therefore the foregoing limitations may not apply to you 8 This warranty does not cover charges for installation or set up adjustments of customer controls and instal lation or repair of system outside the unit the product repair and or replacement because of misuse shipping damage abuse water damage accidental unauthorized repair or other causes not within the control of Philips
13. rsation at the same time Press to stop the message playback Private listening of recorded messages You can also listen in private to the messages E gt OO gt amp Replace the handse if you finish The following functions can be accessed during playback e Press to stop the message playback e Press and hold for about 2 seconds to fast forward e Press and hold amp for about 2 seconds to fast rewind e Press 6 to skip to the next message e Press to repeat the same message e Press G at the start of a message to skip back to the previous message e Press to remove message refer to Erasing messages for details 8 g 8 Erasing messages When the blinks press Info to check the status Selective erase TD amp Press to select the message to erase Complete erase for stored messages only Press amp release after hearing the voice confirmation and a beep Operating the remote access feature You can give commands to your answering machine from another telephone by entering the 4 digit remote code Dial the telephone number use a tone generating telephone or a beeper 2 The answering machine will answer after the set number of rings If it is set in the Answer Off mode it will answer after 9 rings 3 Press G or to stop the outgoing message announcement 4 After a short beep is heard enter your remote code 5 Press to listen to the Help commands note If remote code
14. to the telephone line jack and wall jack Wrong TBR time is set Securely plug the telephone line cord into the telephone line jack and wall jack Set the TBR time according to your network If in doubt please contact your network operator Answering Machine Outgoing message cannot be recorded properly The machine does not answer calls Handset cord is not connected Outgoing message duration is less than 3 seconds Unit is in the Answer off mode No line connection No Power Connect the handset cord securely Record the outgoing message for at least 3 seconds Press button to switch the answer mode on Check the line con nection Check the power Messages are not recorded Memory full Ans Only mode is on No Power Erase the old messages Press the Answer Record button Check the power The machine stops recording before the message is finished A silence period of 7 seconds is detected Memory is full during recording Do not stop speaking for more than 7 seconds Erase the old messages The answering machine does not respond to remote control com mands You are not using a touch tone telephone The answering machine does not receive the commands properly Be sure you are using a touch tone Phone beeper Re enter command Abnormal display or performance A system error has occured Unplug the power and repeat the start up procedu
15. you must first lift the handset in order to operate all setting above Receiving incoming calls Ca Handsfree Conversation O gt h gt OnO Telephone number Keep at a distance Press to adjust of about 30 cm the speaker volume note To switch from handsfree to private conversation lift the handset To switch from private to handsfree conversation press and re place the handset The Last Number Redial feature The last number dialed will be stored automatically and can be redialed with the touch of the redial button To redial the number amp Q note The telephone number can only be redialed if e it consists of not more than 32 digits is the first button pressed after you take the line If other buttons are pressed first the previous telephone number will be replaced The Call Timer Feature for reference only e When receiving an incoming call conversation time will start automatically e When making a call the conversation time will start counting 10 seconds after the telephone number is entered and the conversation time will be shown on the display e Terminating the call will stop the call timer automatically The total conversation time will remain displayed for 5 seconds The amp F and Flash buttons These buttons can be used for special public or private exchange ser vice functions Please consult your network operator for further de tails concerning the network service pr
Download Pdf Manuals
Related Search