Philips 55PP925 Projection Television User Manual
Contents
1. 34 ACTIVATING THE PIP AND DOUBLE W INDOW CONTROL eror nnnm nun nan nuu nnum nnmnnn nanana 35 37 SPECIFICATIONS ssasecesancescaasasnnntnaesuncdecesdesstanaetedsnssedeassdnustadesasecusesansstadeunesseassuninaata 38 SAFETY INFORMATION USEFUL TIPS Safety Disconnect mains plug when the red light below the TV screen is flashing continuously a bright white line is displayed across the screen cleaning the TV screen N ever use abrasive cleaning agents Use a slightly damp chamois leather or soft cloth there is a lightning storm the set is left unattended for a prolonged period of time Useful Tips Do not place your TV set under direct sunlight or heat Avoid placing your set e g near the window where it is likely to be exposed to rain or water Do not leave pur set on standby mode for a prolonged period of time Switch off set to allow it to e demagnetised A demagnetised set supports good picture quality Do not shift or move the set around when it is switched on U neveness in colour some parts of the screen may occur Never attempt to repair a defective TV yourself Always consult a skilled service person BEFORE CALLING SERVICE Below is a list of frequently occurring symptoms Before you call for service make these simple checks Some of these symptoms can easily be rectified if you know what to do Symptom W ha2. nannan nnna 15 EDITING OF CHANNELS sssssssecnnscesccsssnsnceconsusssceeatsendcnnsessacescsscndannocdescsssesenacansscnasess 16 NAMING OF CHANNELS sssssssssseccccessessensnnnneeneesseseenennnnneneeseessesesnenneeseneessusnsnnsneeasens 17 USING THE PICTURE MENU sisctnccsnssnnscnssccnscanssancnanssacnnsdennrenacancdauedansssterasesacescdenncen 18 USING THE SOUND MENU asssssssscsscccsseessennnneneeecesseseenenennneecescusssensneneeoeecesseensnennaenes 19 CONVERGENCE Converge Red Blue rarius ie eee 20 Multipoint Red Blue essent 21 22 Usndo lt MUILIPOIAE accio t ttt pedit tbc te ide 23 ACTIVATING THE IMER ica ron arua aia nisi donna ia dn Ran PE RR RR ORE 24 25 ACTIVATING THE CHILD Lock Access Code Change Code Lock Channel Clear A trio vcn ds De ei et Erud FER D ates USING THE CLOSED CAPTIONING CONTROL eere nonna unu nnn nnn nn 30 31 USING THE SURF CONTROL 717 eene e erra n nnn nnn nuu nuu uua nuu nuu u uu sura rusa 32 ACTIVATING THE BLUE MUTE CONTROL 1 nennen nean nnn nuu 33 USING THE PROGRAM LIST FEATURE 1e er rrrr enn nn nenne nana uana ua uaa a uuu uua nuu 33 SMART PICTURE AND SMART SOUND error rrr nn nnn nnn nua nua nu
3. CHANNEL BLUE MUTE ACTI VATE FEATURES TIMER ACCESS CODE PIP CLOSED CAP BLUE MUTE COME 5 Enter ACCESS CODE Su Tae mode URES TIMER ACCESS CODE CHILD LOCK PIP CORRECT CLOSED CAP BLUE MUTE S 6 Key in access code 7 Press button repeatedly until CLEAR ALL is selected FEATURES CHILD LOCK LOCK CHANNEL CHANGE CODE CLEAR ALL oe PHILIPS C2 8 Activate clearing of all locked channels FEATURES CHILD LOCK LOCK CHANNEL CHANGE CODE CLEAR ALL CLEARED C 9 Exit menu from screen Note You can also unlock individual channels by the LOCK CHANNEL menu Repeat step 1to 7as in ACTIVATING THE CHILD LOCK LOCK CHANNEL Select the channel you want to unlock by the 0 or Q CURSOR UP DOWN buttons Press the CURSOR RIGHT button to unlock channel the keylock symbol will disappear 29 USING THE CLOSED CAPTIONING CONTROL Closed Captioning allows you to read the voice content of television programmes on the TV Designed to help the hearing impaired this feature uses on screen text boxes to show dialogue and conversations while the TV programme is in progress OLOH Ho OH HOA CED LOK TE do 606 rec ae Gun 1 Enter main menu 2 Select FEATURES 3 FEATURES menu Press button
4. CLOSED CAP CHANNEL BLUE ACTI VATE Press button Result on TV Screen Select CHILD LOCK FEATURES TI MER ACCESS CODE epp CLOSED CAP BLUE MUTE suer o Tes Enter ACCESS CODE URES mode MER ACCESS CODE Key in access code CHILD Lock EEEE CORRECT LOSED CAP UE MITE Enter LOCK CHANNEL FEATURES mode CHILD LOCK LOCK CHANNEL CHANGE CODE CLEAR ALL Select the channel you OR want to block FEATURES a Q Activate blocking of UE T UL a PHILIPS channel A keylock symbol CHANGE CODE C3 will appear beside the erate channel number indicating that it is locked CO 10 Exit menu from screen Note You cannot have access to the locked channels via the TV set s controls You can only have access to the locked channels via the remote control W hen AV1 source is locked CV1 source is automatically locked Likewise if C V1 source is locked AV1 source is also automatically locked as they share the same audio input If you attempt to enter the INSTALL menu after locking a channel a message Enter ACCESS CODE will appear on the screen You need to enter the ACCESS CODE to enable you to enter the INSTALL menu 28 ACTIVATING THE CHILD Lock CLEAR ALL To unlock all channels that you have locked enter the Child Lock menu and activate the CLEAR ALL mode FEATURES CHILD LOCK START TI ME PIP STOP TI ME CLOSED
5. TI MER CHI LD LOCK CLOSED CAP BLUE MUTE ACCESS CODE XXXX NCORRECT FEATURES TI MER CHILD LOCK CLOSED CAP BLUE MUTE ACCESS CODE XXXX CORRECT FEATURES CHI LD LOCK CHANGE CODE CLEAR ALL ACTIVATING THE CHILD Lock CHANGE CODE Press button Result on TV Screen 0 8 Select CHANGE CODE FEATURES CHI LD LOCK a LOCK CHANNEL ENTER Meier gt NEW CODE CLEAR ALL gt 9 Enter CHANGE CODE mode FEATURES CHI LD LOCK Lock CHANNEL B O 9 10 Key in the access code of CODE our choice CLEAR ALL XXXX O O O 11 Confirm access code o 6 0 FEATURES CHI LD LOCK PHILIPS LOCK CHANNEL CONFI RM lt CHANGE CODE 3 CLEAR ALL XXXX W hen the new code is confirmed the FEATURES message CORRECT CHI LD LOCK Lock CHANNEL BIETET will appear lt CHANGE CODE meets CLEAR ALL XXXX CORRECT 050 CO 12 Exit menu from screen Note After you have exited menu from screen and you want to enter child lock menu again you need to key the new access code only once If you have forgotten the new access code key in 0711 twice to enter the child lock menu U pon entering the child lock menu you can proceed to change code again 27 ACTIVATING THE Lock Lock CHANNEL FEATURES CHILD LOCK START TI ME PIP STOP TI ME
6. Exit menu from screen Result on TV Screen CTURE i HUE CONVERGE RED COLOUR TEMP CONVERGE BLUE NR MULTI POI NT RED INCR PICTURE MULTI POI NT BLUE CONVERGENCE SAVE MULTI NT a CONVERGE BLUE MULTI POI NT RED MULTI POI NT BLUE SAVE MULTI POI NT PI CTURE CONVERGENCE CONVERGE BLUE MULTI POI NT RED MULTI POI NT BLUE SAVE MULTI POL NT lt UNDO MULTI POINT RESTORI NG CTURE CONVERGENCE CONVERGE BLUE MULTI POI NT RED MULTI POI NT BLUE SAVE MULTI POI NT lt UNDO MULTI POINT RESTORED The Timer feature allows you to set the timer to switch to another channel at a specified time while you are watching another channel or when the TV is on standby mode Press button TIMER PHILIPS 1 Enter TIMER menu Enter TIME mode Key the current time For example if the current time is 12 30 key digit 1 and 2 in the hour column followed by digit 3 and 0 in the minute column Exit from TIME mode Select START TIME Enter the START TIME mode Key in the time you want the programme to be switched on Exit from START TIME mode Select STOP TIME Enter STOP TIME mode Key in the time you want the programme to be switched off 24 Result on TV Screen FEATURES TI MER lt TIME
7. channels to the surf list exit menu from screen DELETE Note To view the the selected channels in the surf list press the SURF button repeatedly to cycle through the channels How to delete a channel from the surf list 1 Press the SURF button to display surf list 2 Press the SURF button repeatedly to cycle through the surf list and select the channel you want to delete 3 Press the O CURSOR RIGHT button to delete channel from the surf list 4 Repeat all the above steps if you want to delete more channels from the surf list 32 ACTIVATING THE BLUE Mute CONTROL The Blue Mute feature indicates to you the absence of signal in the transmission when the option is activated Upon the detection of absence of signal the TV screen will turn blue in colour 69 OH m FEATURES TIME Q e n CHILD LOCK START ME STOP TI ME CLOSED CAP CHANNEL BLUE MUTE ACTI VATE 1 Enter main menu 2 Select FEATURES 3 Enter the FEATURES menu 4 Press the Q CURSOR DOWN button repeatedly until BLUE MUTE is selected FEATURES TI MER 5 Press the CO CURSOR RIGHT button to select ON TA to activate blue mute feature CLOSED CAP BLUE MUTE ex ON 6 Press the C OSD button to exit menu from screen UsiNG THE PRoGRAM Lisr FEATURE The Program List feature allows you to navigate through a list of installed prog
8. Result on TV Screen Q 4 Select CLOSED CAP FEATURES TIMER CAPTI ON MODE CHILD LOCK CC DI SPLAY PIP gt CLOSED CAP MITE gt 5 Enter CLOSED CAP FEATURES menu CLOSED CAP c CC DI SPLAY CC3 CD 6 Enter CAPTION MODE mode FEATURES 7 Select your desired caption CCl OR mode You can choose CC DISPLAY caption or text mode 0 There 5 types of caption CC1 CC2 and CC MUTE and 4 types of _ text TXT1 TXT2 TXT3 PHILIPS and 4 8 Exit from CAPTION FEATURES o MODE CAPTI ON MODE 9 Select CC DISPLAY C gt 10 Select ON to display Closed Captioning FEATURES LOSED CAP on screen CAPTI ON MODE CC DI SPLAY gt ON 050 CO 11 Exit menu from screen 30 UsING THE CLOSED CAPTIONING CONTROL Example of a CAPTION mode Caption 1 2 3 or 4 During screening dialogues or descriptions for the captioned television programme appear on the screen The text can appear up to 4 rows simultaneously anywhere on the screen Darling are sure you do not want anything to eat Example of a TEXT mode Closed Caption Programme on TCS TEXT 1 2 30r4 Text mode is often used for channel guides schedules or bulletin board information when programmes with Closed Captioning are shown The complete screen is used for 08 00 Things People Do displaying the text 10 00 Din
9. SOUND Allows you to select your desired sound setting from 4 types of sound settings MENU Displays main menu Also exits menu from screen CURSOR UP Allows you to select the next item on the menu CURSOR LEFT Allows you to access the sub menus and adjust the settings VOLUME Increases or decreases volume A CH Allows you to alternate between the last viewed channel and the present channel VIRTUAL DOLBY SURROUND Allows you to select Stereo Incredible Surround or Virtual Dolby Surround sound when transmission is in Stereo Note Selecting Virtual D olby Surround will allow you to enjoy the sensation of Home C inema surround sound with just 2 front speakers Allows you to select Spatial or Mono when transmission is in Mono Allows you to select Stereo or Mono when transmission is in Stereo Allows you to select Dual I or Dual I during dual sound transmission o000600 Manufactured under license from D olby Laboratories Dolby Virtual Dolby Surround and the double D symbol are trademarks of Dolby Laboratories 10 FUNCTIONS OF REMOTE CONTROL o 0060 O O STANDBY Switch set off temporarily to standby mode The red light indicator lights up when set is in standby mode To switch on set from standby mode press Channel U p D own Digit 0 9 or Standby button CC Closed Captioning Button Allows the he
10. TUNER MODE 11 Select AUTO PROGRAM gt SEARCH CHANNEL EDIT a 12 Enter AUTO PROGRAM 4 INSTALL 068 LANGUAGE CABLE 13 Start automatic tuning TUNER MODE PLEASE WAIT AUTO PROGRAM MANUAL CHANNEL 2 QOOO0oso0o0o08000 0 14 W hen tuning is completed exit menu from screen 14 This feature allows you to adjust picture reception in areas of weak reception INSTALL a LANGUAGE gt ENGLI SH TUNER MODE AUTO PROGRAM CHANNEL EDI T MANUAL Press button Result on TV Screen Press button repeatedly NSTALL until MANUAL is selected LANGUAGE FINE TUNE TUNER MODE STORE AUTO PROGRAM CHANNEL EDIT Enter MANUAL menu NSTALL ine i MANUAL a Start fine tuning until desired AIETE picture and sound are obtained store Select STORE INSTALL MANUAL FINE TUNE STORE y Store last fine tuned status NSTALL MANUAL STORE amp FI NE TUNE lt STORE STORED NSTALL MANUAL FINE TUNE STORE Tub 050 CO 9 Exit menu from screen 15 EDITING OF CHANNELS This feature allows you to edit or skip channels which have bad or weak TV signal or channels that you do not watch often Note nce a channel is skipped you cannot have access to it by the CHANNEL or button You can only access the channel by the DIGIT 0 9 button a O
11. ART TI ME STOP TI ME CHANNEL ACTIVATE lt DISPLAY gt ON 30 seconds before the timer is activated a message indicating the time left for the channel switch will appear on the screen To disable the channel switch press any button on the remote control 25 ACTIVATING THE Lock Access Cope The Child Lock feature allows you to lock channels to prevent your children from watching programmes you deem undesirable Note You cannot have access to the locked channels via the TV set s controls You can only have access to the locked channels via the remote control Keep the remote control out of reach so as to prevent your children from having access to it S O_O 696 C O UO 209 FEATURES MER CHILD LOCK PIP CLOSED CAP BLUE MUTE TI ME START ME STOP TI ME CHANNEL ACTI VATE 1 Enter main menu 2 Select FEATURES 3 FEATURES menu PHILIPS Press button 0 4 Select CHILD LOCK Enter ACCESS CODE mode Key in access code 0711 0711 is the default access code A message INCORRECT vwill appear Key 0711 the second time W hen the message CORRECT appears the CHILD LOCK menu is now accessible You can now proceed to change the access code of your choice 26 Result on TV Screen FEATURES TI MER ACCESS CODE CLOSED CAP BLUE MUTE FEATURES
12. DA are trademarks of D olby Laboratories 8 EXTERNAL SPEAKER CONNECTIONS CONTINUED External Powered Subwoofer Connection Back of i TV Crossover Volume Back of Frequency Powered Subwoofer Level Input High Level Input High Level Output Powered Subwoofer Connect the INPUT sockets of a powered subwoofer to the SUBWOOFER socket on the rear of the TV You can use a y shaped cable to make the connection You can also use a single cable and connect to either the or L Low Level Input sockets Note If you use a single cable to make the connection to the powered subwoofer you will need to increase the volume on the back of the subwoofer to compensate for the absence of the Second cable The powered subwoofer trim must be adjusted from the external powered subwoofer FUNCTIONS OF REMOTE CONTROL SLEEP Allows you to select a time period after which the set will switch to standby mode automatically OSD Displays the channel number sound and colour transmission mode status of the sleeptimer channel name if channel is named and the current time if current time is being entered in the Timer menu Also allows you to exit menu from screen AV Allows you to select the AV channels DIGIT 0 9 Allows you select a channel Note For a 2 digit number the second digit must be entered before the sign disappears SMART
13. IO and VIDEO IN PUT sockets on the rear of the TV Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and VIDEO OUT sockets on the VCR AV sockets on rear of TV Back of S VHS VCR The S Video connection on the rear of the TV is used for the playback of S VHS VCR tapes Video Discs Video Games or Compact Disc Interactive cd i discs Better picture detail and clarity is possible with the S Video playback as compared to the picture from a normal antenna RF connection Connect the S VIDEO socket on the rear of the TV to the S VHS OUT socket on a S VHS VCR Connect the AUDIO IN sockets from the rear ofthe TV to the AUDIO OUT sockets on the VCR Note You need not connect the VIDEO IN socket of the TV if S VIDEO IN socket is connected 5 CONNECTING THE SockerTs PLAYBACK AV sockets on side of TV Camcorder Connect the headphone cable j to the headphone socket for personal listening For more convenient direct playback connections the Side Audio Video Input sockets allow for quick and easy connections particularly Camcorder tape recordings Connect the S VIDEO socket if available from the C amcorder to the Side S VIDEO socket of the TV You need not connect the Side VIDEO IN socket of the TV if the S VIDEO socket is connected Connect the AUDIO OUT sockets Right and Left from the Camcorder to the Side AUD
14. IO IN sockets AV sockets on rear of TV Back of DVD DVD ies with Pb and Pr and Output sockets You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT sockets on the rear of the TV Connect the Pb the Pr INPUT sockets on the TV to the Pb and Pr OUTPUT sockets on the DVD to view playback of DVD discs 6 CONNECTING THE Aupio VipEo Sockers RECORDING Connection for recording from the TV channel AV sockets on rear of TV VCR Equipped with Video sockets Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT sockets on the rear of the TV To enhance the sound of your TV connect the AUDIO L and R sockets to an external audio system instead of the VCR For mono equipment connect only the AUDIO L socket Connection for recording from one VCR to another VCR AV sockets on rear of TV VCR Equipped with Video and Audio Output sockets VCR 1 VCR 2 N VCR Popippec with Video p and Audio Input sockets Connect the sockets of the VCR which you wish to record from to the corresponding sockets at either AV2 Connect the sockets of the receiving VCR to the MONITOR OUTPUT sockets
15. Note After turning the TV set on allow it to warm up for 15 minutes before adjusting Convergence If you adjust Convergence and then change your signal source from PAL to NTSC or from NTSC to PAL you may need to readjust Convergence for the new signal source Press button Result on TV Screen Enter main menu CTURE HUE CONVERGE RED COLOUR TEMP CONVERGE BLUE Enter PICTURE menu NR MULTI POI RED INCR PICTURE MULTI POI NT BLUE SAVE MULTI POI NT Press button repeatedly CONVERGENCE PI CTURE is selected CONVERGENCE lt CONVERGE RED 9 CONVERGE BLUE Enter CONVERGENCE MULTI POI NT RED MULTI POI NT BLUE menu SAVE MULTI POI NT Enter CONVERGE RED mode Adjust cross image until t7 CONVERGENRED colour outline is gone PHILIPS CO 7 Exit menu from screen CONVERGE RED 050 Note You can adjust CONVERGE BLUE similar to the way you would adjust CONVERGE RED PI CTURE i HUE CONVERGE RED COLOUR TEMP CONVERGE BLUE NR MULTI POI RED INCR PICTURE MULTI POI NT BLUE PI CTURE CONVERGENCE CONVERGE RED lt CONVERGE BLUE MULTI POL NT RED MULTI POI NT BLUE SAVE MULTI POI NT CONVERGE BLUE gt CONVERGE BLUE M gt CONVERGENCE SAVE MULTI POI NT ConvVERGENCE Mu tipoint RED BLUE If various images on the entire picture have red outlines adj
16. Projection Television 43 507 55 Instructions for Use 43PP925 50PP925 55 925 4 make things lette amp PHILIPS e 3135 015 22191 INTRODUCTION Thank you for purchasing this television set You are now the proud owner of a PHILIPSTV set which promises full value to s as a customer Please read the instruction manual carefully and thoroughly to help you install and operate your TV set TABLE OF CONTENTS SAFETY NFORMATION U SEFUL TIPS sununnnnonnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 3 BEFORE CALLING SERVICE 1 eoo nnne nnn nna anna annu nuu nn uu nnn nnnnnnn nnmnnn nnna 3 INSTALLATION E 4 CONNECTING THE Aupio Vipeo Sockers Playback de erre etre ede dete e D D e oe nes Recording EXTERNAL SPEAKER CONNECTIONS e ees nona nnn annu ununi uua uu uua uuu nnmnnn 8 9 FUNCTIONS OF REMOTE CONTROL errem nua nua uan nu nuum 10 11 FUNCTIONS OF TV CONTROLS 11 nenne nnn nnn nuu nnn uan nuu 12 13 SELECTING THE Menu LANGUAGE TUNER AND AUTOMATIC TUNING OF 5 nnan nnn 14 FINE TUNING OF CHANNELS nnn uana nnn nuu uua uaa
17. QO 1 Enter main menu PHILIPS 050 C6 O OR Q OX 2 Select INSTALL 3 Enter instal Press button Q 4 Press button repeatedly until CHANNEL EDIT is selected Enter channel edit mode Select the channel you want to skip Activate skipped mode CO 8 Exit menu from screen How to add back channels Repeat steps 1 to 5 as in Editing of Channels Select the channel you want to add back by the 0 CURSOR UP or Q CURSOR DOWN button NSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT MANUAL ENGLI SH Result on TV Screen NSTALL LANGUAGE TUNER MODE AUTO PROGRAM o MANUAL NSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT MANUAL NSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT MANUAL Press the C CURSOR RIGHT button to activate adding back of channel Exit menu from screen by the C OSD button 16 NAMING OF CHANNELS This feature allows a selection of 50 pre defined names It also allows you to enter anew name or modify an existing name according to your personal preference INSTALL A LANGUAGE ENGLI SH TUNER MODE AUTO PROGRAM CHANNEL EDIT MANUAL 1 Enter main menu 2 Select INSTALL 3 Enter install mode Press button Result on TV Screen Q 4 Press button repeatedly Ps 5 u
18. ReED BLuE CONTINUED Press button Result on TV Screen Navigate to across image that has a colour outline Note display three hidden cross images navigate to bottom row Enter ADJUST mode Adjust cross image until colour outline is gone Return to NAVIGATE mode Repeat steps 7 to 10 PHILIPS until all misaligned crosses have been adjusted 11 Return to CONVERGENCE PI CTURE CONVERGENCE menu CONVERGE RED CONVERGE BLUE MULTIPOINT BLUE SAVE MULTI NT i Q 12 Press button repeatedly mE until SAVE CONVERGENCE MULTIPOINT is selected Cowence suc MULTI POI NT RED MULTI POI NT BLUE lt SAVE MULTI POL NT gt CD 13 Activate storing of om Multipoint adjustments CONVERGENCE CONVERGE RED CONVERGE BLUE MULTI POI NT RED MULTI POI NT BLUE CO 14 Exit menu from screen 050 Note You can adjust MULTIPOINT BLUE similarly to the way you would adjust MULTIPOINT RED 22 CoNvERGENCE UNDO MULTIPOINT UNDO MULTIPOINT allows you to restore the TV s picture screen to the way it was before you made Multipoint adjustments Press button PHILIPS g 050 Enter main menu Enter PICTURE menu Press button repeatedly until CONVERGENCE is selected Enter CONVERGENCE menu Press button repeatedly until UNDO MULTIPOINT is selected Activate restoring of previous picture screen
19. START TI ME STOP TI ME CHANNEL ACTIVATE D FEATURES TI MER lt TI ME START TI ME STOP TI ME CHANNEL ACTIVATE a 12 30 Y FEATURES TI MER a TIME STOP TI ME CHANNEL ACTIVATE FEATURES TI MER a TIME 4 START TI ME STOP ME Y CHANNEL ACTIVATE FEATURES TI MER A TI ME START TI ME CHANNEL ACTIVATE FEATURES TI MER TI ME START TI ME lt STOP TIME CHANNEL T ACTIVATE ACTIVATING THE TIMER CONTINUED Press button e Q 17 CO 18 050 Co 19 1 O14 eoo H CO 16 Exit from STOP TIME mode Select CHANNEL Key in the channel you want to switch to Select ACTIVATE Activate timer You can select to activate timer by DAILY or ONCE mode Select DISPLAY Select ON mode if you want to display the current time on the TV Screen Exit menu from screen Result on TV Screen FEATURES TI MER TIME START TI ME STOP TI ME lt CHANNEL ACTIVATE y FEATURES TI MER TIME START TI ME TIME lt CHANNEL uii ACTIVATE Y FEATURES TI MER TI ME START TI ME STOP TI ME CHANNEL lt ACTIVATE ox Y Y FEATURES TI MER TIME START TI ME STOP TI ME CHANNEL ACTI VATE gt ONCE Y Y FEATURES TI MER i ST
20. VERGENCE controls menu item PI CTURE BRI GHTNESS gt 38 Brightness Increase or decrease brightness level Colour Increase or decrease color level Contrast Increase or decrease contrast level until parts of the picture show good etail Sharpness Increase or decrease sharpness level to improve detail in the picture COLOUR CONTRAST SHARPNESS D D HUE ui CTURE HUE CONVERGE RED COLOUR TEMP CONVERGE BLUE Hue Increase or decrease hue level Colour Allows you a choice of 3 NR MULTI POI NT RED INCR PICTURE MULTI POI NT BLUE Temp picture settings N O RMAL W ARM and COOL SAVE MULTI POI NT Noise Allows you to reduce the noise little Reduction dots on the picture from weak signal broadcast Selecting the O option will make the picture clearer Incredible Selecting the O N option enhances the Picture details in the picture The result is a more dynamic and vivid picture Convergence Allows you to adjust how the red green and blu colour components of the picture come together on the screen The sound menu allows you to make adjustments to the sound It also allows you to select and activate other features in the menu 1 Press the G MENU button to enter main menu 2 Press the Q CURSOR DOWN button to select the SOUND menu 3 Press the C CURSOR RIGHT button to enter the SOUND men
21. aring impaired to read the voice content of television programs when ON option is selected To select your desired caption mode refer to the section on Using the Closed C aptioning C ontrol TIMER Allows you to set the clock to switch to another channel at a specified time while you are watching a channel or when the set is in standby mode SMART PICTURE Allows you to select your desired picture setting from 5 types of picture settings SURF Allows you to select up to a maximum of 10 channels and view quickly the selected channels CURSOR RIGHT Allows you to access the sub menus and adjust the settings CURSOR DOWN Allows you to select the next item on the menu CHANNEL Selects channel in ascending or descending order MUTE Mutes sound To restore sound press button again PROGRAM LIST Allows you to navigate through a list of installed programmes for a quick overview of the channels and activate the channel you have selected INCREDIBLE PICTURE Allows you to view amore vivid and realistic picture with better contrast when the ON function is selected PIP Allows you to access the Picture in Picture and Double W indow features For more detailed description of functions refer to section on Activating the PIP and Double W indow Control 11 Functions 43 925 Switch mains power or off Switch TV on or ac
22. een Press the C2 PIP Swap button to swap the programme in the PIP screen and the programme in the main screen How to adjust the PIP Hue setting 1 Press the on MENU button to enter main menu PICTURE TI MER 2 Pressthe CURSOR DOWN button repeatedly until FEATURES is selected INSTALL CLOSED CAP 3 Pressthe C CURSOR RIGHT button to enter the FEATURES menu FEATURES 4 Press the Q CURSOR DOWN button repeatedly until PIP is selected e CLOSEDCAP 5 Pressthe C CURSOR RIGHT button to enter PIP menu Pressthe CURSOR LEFT or CURSOR RIGHT button to adjust HUE setting to your desired level Press the OSD button to exit menu from screen N Note Hue adjustments in the PIP programmes will only take effect if programmes are in NTSC mode 37 SPECIFICATIONS 43PP925 50PP925 55PP925 Picture visible area 109 cm 127 cm 140 cm Audio Output 2x 15 TV System NTSC M Set Dimensions Width 950 cm 1130 cm 1222 cm Depth 540 cm 613 cm 612 cm Height 1142 cm 1476 cm 1549 cm Net weight of set approx 58 kg approx 83 kg approx 90 kg Note For Operating Voltage Frequency Power Consumption and Version Number refer to the type number at the rear of the set 38
23. et to hear PIP sound The HEADPHONE control within the SOUND menu allows you to adjust the headphone volume Refer to the section on Using the Picture Sound Menu for J instructions 35 ACTIVATING THE PIP PicrunE IN PicTURE CoNTROL How to select a PIP channel Press the CO PIP On Off button to ON OFF switch on PIP screen Press the GD PIP CH or PIP CH button to select a PIP channel in ascending or descending order How to freeze the PIP screen Press the C2 PIP On Off button to switch on PIP screen Press C2 PIP Freeze button once to freeze the PIP screen Freezing the PIP screen allows you to view a programme in the still mode For example you may want to write down some information from the PIP screen freezing the screen will allow you time to do so Pressthe C2 PIP Freeze button the second time to unfreeze the PIP screen PIP Unfreeze ACTIVATING THE PIP PicrunE IN PicTURE CoNTROL How to position the PIP screen Press the C2 PIP On Ofi button to switch on PIP screen Press the PIP Position button repeatedly to your desired position You can choose the PIP screen to be on the top left corner top right corner bottom right corner or the bottom left corner How to swap the PIP screen and the main screen Press the lt PIP On Off button to switch on PIP scr
24. ing in Style 12 00 News at Noon 12 30 The Animal Kingdom All items are based on standard time est Check local listings for the time in your area IMPORTANT 1 Not all television programmes and product commercials are made for broadcast with Closed C aptioning information included N either are all Closed Captioning modes Caption 1 0 4 TEXT 1 to 4 necessarily being used by a broadcast station during transmission of a programme with Closed C aptioning Check with your local listings for details 2 broadcast station will often use spelling abbreviations symbols and other grammatical short cuts in order to keep pace with the on screen action These vary with the source of the captioned text material and do not indicate a need for the service ofthe television 31 U SING THE SURF CONTROL A list or series of previously viewed channels can be selected with the SURF button This feature allows you to switch between different TV programmes that currently interest you You can set up to a maximum of ten channels in the SURF list How to add a channel to the surf list Press button Result on TV Screen 1 Select a channel you to add to the surf list OOOO 2 Enter SURF menu SURF LIST EMPTY dee 3 Add selected channel to the surf list DELETE Repeat steps 1 3 to add more channels to the surf list PHILIPS 4 After you have completed adding the selected
25. nd adjust the settings 10 Source Select button Cycle through the signal sources Note W hen the Mains Power button has been pressed so that the TV is in Power Standby mode you can press any of the TV s other controls to turn the set on 13 SELECTING THE MENU LANGUAGE TuNER AND TUNING CHANNELS Before you tune in the channels by the Auto Store method select the desired menu language and tuner mode Note The available menu languages will vary based on region Press button Result on TV Screen 1 Enter main menu BRI GHTNESS SOUND COLOUR FEATURES CONTRAST NSTALL SHARPNESS Press button repeatedly until INSTALL is PICTURE LANGUAGE selected SOUND TUNER MODE FEATURES AUTO PROGRAM gt NSTALL CHANNEL EDIT MANUAL 3 Enter INSTALL menu NSTALL 1 LANGUAGE ENGLI SH TUNER MODE AUTO PROGRAM ol CHANNEL EDIT 4 Enter LANGUAGE mode NSTALL LANGUAGE gt ENGLI SH i TUNER MODE 5 Select desired language procram ES CHANNEL EDI T MANUAL 6 Exit from language mode STALL LANGUAGE gt AUTO 7 Select TUNER MODE TUNER s CHANNEL EDIT ANTENNA Enter TUNER MODE menu NSTALL LANGUAGE TUNER MODE gt AUTO 9 Select desired tuner mode S AUTO PROGRAM CADE AUTO CABLE or CHANNEL EDI T ANTENNA ANTENNA 10 Exit tuner mode INSTALL LANGUAGE
26. ntil NAME is highlighted CHANNEL EDIT MANUAL PERSONAL 5 065 CD 5 Enter NAME mode 1 O 6 Select desired preset name y OR and press C CURSOR CHANNEL EDT O RIGHT button to store NAME PERSONAL 0 selected pre set name gt 7 If you select PERSONAL p move to first character slot AUTO PROGRAM CHANNEL EDIT MANUAL 4 NAME PHILIPS 8 Press button repeatedly rera OR to cycle through the characters and select AUTO PROGRAM O desired character ie Move to next character NAME gt LUCKY slot by the C CURSOR RIGHT button and select in the next character Eis You can enter up to maximum of 5 characters CHANNEL EDIT 9 Store named channel gt LUCKY 0 10 Exit menu from screen 17 USING THE MENU The picture menu allows you to make adjustments to the picture It also allows you to select and activate other features in the menu 1 Press the MENU button to enter main menu 2 Press the gt CURSOR RIGHT button to enter the PICTURE menu 3 Press the 0 or Q CURSOR UP DOW N buttons to select the items on the PICTURE menu 4 Pressthe C or CURSOR LEFT RIGHT buttons to adjust or change settings Note To enter the CONVERGENCE sub menu select CONVERGENCE and press the C CURSOR RIGHT button See the section on CONVERGENCE for instruc tions in how to adjust the CON
27. on the rear ofthe TV 7 EXTERNAL SPEAKER CONNECTIONS Center Channel Amp Input Center Speakers nee of Front Eom Speaker Speaker EE Rear Surround Front Speakers Sound Speakers e mm Q 796 Powered 906 Ma Subwoofer Rear Speaker Speaker Primary Viewing Area Back of a Receiver with Dolby Pro Logic or Dolby Digital By adding an external audio system you can create the feeling of reflected sound that surrounds you at a movie theater or concert hall Connect the corresponding OUTPUT sockets of a receiver with Dolby Pro Logic or Dolby Digital to the CENTER CHANNEL AMP INPUT sockets on the rear ofthe TV Connect the corresponding INPUT sockets of the receiver to the AUDIO L and R sockets on the rear ofthe TV Connect the front speakers and the rear surround sound speakers to the receiver Note To use areceiver with Dolby Pro Logic or Dolby Digital with your TV the TV s AUDIO OUT control must be set to FIXED Refer to the sections on Usingthe Picture Menu and Using the Sound Menu You must have the AMP SWITCH on the rear of the TV in the EXT position for the center channel speakers to operate D olby Pro Logic and the double D symbol
28. rammes for a quick overview ofthe channels and activate the channel you have selected 1 Pressthe PROGRAM LIST button to TUTIUETES display the list of installed programmes The current channel is highlighted 2 Press the CURSOR UP or CURSOR DOWN button to cycle through the programme list and highlight the channel number you want to activate 3 Press the C CURSOR RIGHT button to activate the channel you have selected 4 Press the C OSD button to exit menu from screen SMART PICTURE AND SMART SOUND CONTROL SMART PICTURE feature offers you a choice of 5 picture settings namely PERSONAL RICH NATURAL SOFT and MULTIMEDIA SMART SOUND feature offers you a choice of 4 sound settings namely PERSONAL VOICE MUSIC and THEATRE Press C SMART PICTURE SMART SOUND button repeatedly to cycle PICTURE through the settings to select your desired mode Definition of Picture Settings PERSONAL Picture settings are set to your preference RICH Emphasize very vibrant colours suitable for AV mode in brightly lit room NATURAL Emphasize original colours SOFT Emphasize warm colours suitable for dimly lit room condition and gives cinema like effect when light is switched off MULTIMEDIA Emphasize soft colours suitable for playing computer games surfing etc Note The PERSONAL setting is the setting that you set up using the Picture menu in the main men
29. t you should do Colour patch Switch off the TV by the mains power button W ait for 20 uneveness minutes before switching on again Check the TV is not placed too near speakers or magnetic objects N o power e Check the TV s power cord is plugged into the mains socket If there is still no power disconnect plug W ait for 60 seconds and re insert plug Switch on the TV again No picture Check the antenna connection at the rear of the TV Possible TV station problem Try another channel Good picture but no sound Try increasing the volume Check that the sound is not muted If it is muted press the mute button on the remote control to restore sound Good sound but poor colour or no picture Try increasing the contrast and brightness setting Snowish picture and noise Check antenna connection at the rear of the TV Horizontal dotted lines Possible electrical interference e g hairdryer vacuum cleaner Switch off appliances Double images or Ghost images Possible poor positioning of antenna Using a highly directional antenna may improve reception TV not responding to remote control handset Check life span of batteries of remote control handset Aim remote control handset directly at remote control sensor lens on the TV 3 INSTALLATION Positioning of the TV set Place your TV set on a solid base strong enough to withstand the weight of the set Lea
30. tivate standby mode Indicates red light when standby mode is activated C ycle through the signal sources Select channel in ascending order Channel v button Select channel in descending order Volume 24 button Adjust the sound volume louder Volume 21 button Adjust the sound volume softer Note ou can enter the main menu by pressing both the Volume 24 24 buttons at the same time Press the Channel A or v button to select the next item on the menu Press the Volume 1 24 button to access the sub menus and adjust the settings Acts as a sensor for activating the controls of the TV when the remote control handset is aimed at it Note W hen the Mains Power button has been pressed so that the TV is in Power Standby mode you can press any of the TV s other controls to turn the set on 12 Functions 5 925 anb 55 925 Switch mains power or off Power Standby button Switch TV on or activate standby mode Standby Light Indicator Indicates red light when standby mode is activated o Remote Sensor Acts as a sensor for activating the controls of the TV when the remote control handset is aimed at it Adjust sound volume softer Adjust sound volume louder Select channel in descending order Display the main menu Note Press the Channel A or v button to select the next item on the menu Press the Volume 24 or 24 button to access the Sub menus a
31. u 4 Press the Q or CURSOR DOWN UP buttons to select the items on the SOUND menu 5 Pressthe or C CURSOR LEFT RIGHT buttons to adjust or change settings Note See the instructions below for adjusting the HEADPHONE settings Treble crasse or decrease the high frequency evel Bass ric ERG or decrease the low frequency evel Balance Adjusts the balance of the right and left speakers sound output AVL Auto Volume Leveller As variation in signal conditions can result a sudden change in volume during commercial breaks or channel switching selecting the O N function will enable the volume to remain at a standard volume level Incredible Surround Allows you to dramatically expand the wall of Sound that surrounds the listener and heighten overall viewing pleasure SOUND BASS BALANCE AVL HEADPHONE H Y ui SOUND INCR SURROUND HEADPHONE AUDIO OUT SPEAKERS lt BASS BOOST OFF How to adjust the Headphone Allows you to adjust the volume and balance of the headphone Audio O ut You can connect an external audio system to enhance the sound of your TV Selecting VARIABLE allows you to change the volume at the TV using the TV sremote control Choosing FIX ED allows you to adjust the volume at the receiver using the receiver s controls Note You may have to external a
32. u This is the only setting in the Smart Picture settings that can be changed All the other settings are pre set at the factory Definition of Sound Settings PERSONAL Sound settings are set to your preference VOICE Emphasize high tone treble boosted MUSIC Emphasize low tone bass boosted THEATRE Emphasize sensation to action bass and treble boosted PERSONAL BRI GHTNESS BRI GHTNESS COLOUR BRI GHTNESS COLOUR BRI GHTNESS COLOUR MULTI MEDI A BRI GHTNESS COLOUR PI CTURE SHARPNESS PERSONAL ACTIVATING THE PIP PicTuRE IN PICTURE AND DousBL_Le WINDOW CONTROL Picture in Picture feature allows you to call up a sub screen within your main screen enabling you to watch two channels at the same time Double W indow feature allows you to divide the main screen into two sub screens enabling two channels to be watched simultaneously Howto switch on the PIP Double W indow screen Press the PIP On Off button to switch on PIP mode A normal size PIP screen appears Press the C button the second time to change the normal size PIP screen to a smaller size Press the C button the third time to switch to Double W indow screens in 4 3 format PHILIPS How to hear PIP sound Press theC PIP On Off button to switch on PIP mode AV sockets on side of TV Connect the headphone cable to the headphone sock
33. udio system to Auxiliary mode to play soun from your TV Speakers Allows you to turn the TV s speakers ON or OFF Bass Boost Increases the low frequency range T his creates a deeper fuller sound Note STEREO and SAP Second Audio Program features are offered in some areas SAP is an additional audio channel The SAP channel usually is used to provide a second language translation for a programme that is being shown 19 HEADPHONE settings With HEADPHONE selected press the CURSOR RIGHT button to enter the HEADPHONE sub menu Pressthe 0 0 CURSOR DOW UP buttons to select VOLUME or BAL ANCE Press C CURSORLEFT RIGHT buttons to adjust settings Press the MENU button to return to the SOUND menu CONVERGENCE RED BLUE Due to the influence of magnetic fields and changes in the position of the TV the red blue and green screen colours may not align properly The result is that red or blue colours may appear around the edges of images If various images on the entire picture have red outlines adjust CONVERGE RED Then if any red outlines remain adjust MULTIPOINT RED If various images on the entire picture have blue outlines adjust CONVERGE BLUE Then if any blue outlines remain adjust MULTIPOINT BLUE Use UNDO MULTIPOINT if you want to restore the picture screen to the way it was before you made Multipoint adjustments
34. ust CONVERGE RED Then if any red outlines remain adjust MULTIPOINT RED If various images on the entire picture have blue outlines adjust CONVERGE BLUE Then if any blue outlines remain adjust MULTIPOINT BLUE Use UNDO MULTIPOINT if you want to restore the picture screen to the way it was before you made Multipoint adjustments Note After turning the TV set on allow it to warm up for 15 minutes before adjusting Convergence You can use Multipoint Red and Multipoint Blue controls to adjust 25 Convergence points on the screen If you adjust Convergence and then change your signal source from PAL to NTSC or from N TSC to PAL you may need to readjust Convergence for the new signal source Press button Result on TV Screen 1 Enter main menu PI CTURE HUE CONVERGE RED COLOUR TEMP CONVERGE BLUE NR MULTI POI NT RED Co 2 Enter PICTURE menu INCR PICTURE MULTI POI NT BLUE SAVE MULTI POI NT Qe ee 0 0 3 Press button repeatedly T until CONVERGENCE CONVERGENCE a i IS selected CONVERGE BLUE MULTI POI NT RED MULTI POI BLUE SAVE MULTI POI NT CD 4 Enter CONVERGENCE menu CTURE CONVERGENCE CONVERGE RED PHILIPS CONVERGE BLUE 5 Press button repeatedly SAVE MULTI POI NT VENE until MULTIPOINT RED is selected 6 Enter NAVIGATE mode s NAVIGATE OSD ADJ UST 21 CoNvERGENCE Mu ttipoint
35. ve a space of at least 5 cm around each side of the TV set to allow for proper ventilation Do not place TV set near a radiator or other sources of heat Do not place TV set where it can be exposed to rain or excesssive moisture Connecting the Aerial Insert the aerial plug into the socket at the rear of the set Connecting to the mains m nsert the mains plug into the wall socket For correct mains voltage refer to the type sticker at the rear ofthe set e M Note This diagram is not representative of the actual plug and socket Using the Remote Control Battery Usage CAUTION To prevent battery leakage which may result in bodily injury or damage to the remote Install ALL batteries correctly and as marked on the remote control Do not mix batteries OLD and NEW or CARBON and ALKALIN E etc Remove batteries when the remote is not used for a long time Switching on the TV set Press the mains power button to switch on off the TV set If the set is on standby mode indicator light is red press the Standby button on the remote control to switch on set CONNECTING THE Aubio ViDEO SockETs PLAYBACK AV sockets on rear of TV Back of VCR m VCR Equipped with fr Video udio Output M Sockets You can view the playback of VCR tapes Video Disc players camcorders etc by using the AUD
Download Pdf Manuals
Related Search