Philips 32PFL7403 Flat Panel Television User Manual
Contents
1. 27 680 mm TV system 3 58 Playback system 3 58 Antenna input 75 ohms co axial Operating voltage Frequency Refer to the specifications at the back of the TV Power consumption Refer to the specifications at the back of the TV Audio Output 2 x 15 W left right Dimension Width Height Depth Nett weight aprrox only International guarantee conditions This product is guaranteed by Philips for a period of one year after the date of purchase against defects due to faulty workmanship or materials The guarantee covers both parts and labour Service under guarantee is only provided upon presentation of reasonable evidence e g completed guarantee card or purchase receipts that the date of the claim is within the guarantee period The guarantee is not valid if the defect is due to accidental damage including in transport misuse of neglect and in case of alterations or repair carried out by unauthorised persons The guarantee may not apply if the product requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorised or if any damage results from these modifications Service during and after guarantee is available in all countries where this product is officially distributed by Philips In countries where Philips do not distribute the product the local Philips Se2. Shift Special Red Green Yellow Blue Press the cursor left right up down to select the characters words or functions Press the OK key to confirm each character selected Select Cancel to cancel the word or character selected Space to enter a space Delete to delete the last character selected Shift to switch between undercast or capital characters Special to display special characters on the keyboard Press the cursor left repeatedly to return to the Teletext menu again Searching a word Type in the word on screen or select a word from the history list on the right and press OK Select Accept and press OK again The message Searching appears When the word is found it is highlighted in the teletext page To continue the search press the OK key twice When a word is not found a message appears O To search for a new word select Keyboard and press OK Select the new word Reveal Reveals conceals hidden information on a page such as solutions to riddles and puzzles Press the OK key to activate Press OK again to return to the Teletext menu Cycle subpages Makes the subpages cycle automatically Press the OK key to activate and to de activate again Timed page To display a specific page at a certain time Press the cursor right to select Yes or No Enter the time and pagenumber with the cursor keys or the digit keys Note Teletext does not have to remain switched on It is n
3. Lote make things better PHILIPS Help If this instruction manual does not give an answer or if Before calling service do not solve your TV problem you can call your Local Philips Customer or Service Centre See the supplied World wide guarantee booklet Please have the Model and Product number which you can find at the back of your television set or on the packaging ready before calling the Philips helpline Model Product No Contents installation Preparation 2 Keypad on top of the TV 2 Your remote control 3 5 Use of the menus and the menu system 6 Menu Info Remote Control Info 7 Select the menu language 7 Store TV channels Automatic installation 8 Manual installation 8 Give name 9 Reshuffle the programme list 9 Select favourite TV channels 9 Install TV setup General 10 Source 10 Demo 10 Operation SOSC S S S TV menu Picture menu 11 Sound menu 12 Features menu 12 13 Teletext 13 15 Connect Peripheral Equipment Connecting and selecting equipment 16 19 Remote control functions for peripherals 19 Recording 19 Before calling service 20 Tips 21 Glossary 21 Specifications 22 Preparation SOSOSC S S S SsSsSsSSSS Insert the 2 batteries supplied Type R6 0 Place the TV on a solid surface For ventilation leave at least 5 cm free all around the TV Keypad on top of the TV 2 Do not place the TV on a carpet To prevent any unsafe situations do not place any
4. Colour Sharpness Tint Digital options and Dynamic Contrast are automatically stored Select Factory settings in the Setup menu General to restore the predefined factory settings see p 10 Press the cursor right to select Sound Select the menu items in the Sound menu with the cursor up down and adjust the settings with the cursor left right Remember control settings are at normal mid range levels when the bar scale is centred Note Dual LI is only available with dual sound transmission Mono Stereo is only selectable in case of analogue stereo transmission Nicam Analogue is only selectable in case of Nicam transmission Surround modes can not be modified when a headphone has been connected You can also select one of the Surround modes with the B key on the remote control See p 4 Use of the menus 11 Features menu Features TV Programme list Subtitle Sleeptimer Lock Child lock Custom lock Programme lock On timer Unlock Press the cursor right to select Features Select the menu items in the Features menu with the cursor up down and adjust the settings with the cursor left right Use the on screen Menu Info for more information about the menu items Programme list Press the OK key to switch over to the selected TV channel or external Select subtitles Switch on teletext and select the proper subtitle page from the index Switch off teletext Now the subtitle page is stored
5. Each time it is pressed a different sound setting is selected corresponding with specific factory settings of treble and bass O Smart Picture Each time it is pressed a different picture setting is selected corresponding with specific factory settings of Contrast Colour Sharpness Dynamic Contrast and Colour enhancement N setting and you modify a setting in Toi the picture or sound menu all values Personal refers to the personal preference settings of picture and sound selected in the picture and sound menu Remark the moment you are in a predefined smart sound or picture of the menu will overwrite the previously made Personal settings The predefined factory settings remain unchanged possible Active control Active control is a pro active and automatic system The TV continuously measures and corrects all incoming signals in order to provide the best picture Press the amp key repeatedly to select the Active Control values Off or On Off Sharpness and Dynamic Contrast are controlled automatically On Sharpness Dynamic Contrast and Noise Reduction are controlled automatically Press the cursor right to select INFO The Active Control demo menu appears The picture settings are being adapted continuously and automatically The menu items cannot be selected Press the OK key to switch off the Demo Use of the remote control 5 Use of the menus and t
6. page Note The labels for the component video sockets may differ depending on the DVD player Although the abbreviations may vary the letters B and R stand for the blue and red component signals respectively and Y indicates the luminance signal Refer to the DVD player s instructions for use for definitions and connection details Connect Peripheral equipment 17 AV3 AV4 Digital High Definition input OO kee ORON KORO VIDEO 2Fh 480p 1080i AV4 AV3 IN IN AV3 AV4 input connectors will accept the following signals from HD set top box HD STB decoders and progressive scan DVD players ED 480p 31 470 kHz 60 Hz HD 1080i 33 750 kHz 60 Hz HD 576p 31 250 kHz 50 Hz AV3 AV4 input connectors also accept the following 1250 line HD display formats available on selected HD STB decoders as detailed in the Australian DTV Receiver Standards HD 1152i 1250 HD 1080i 1250 31 250 kHz 31 250 kHz 50 Hz 50 Hz Side connections L ko auole 0 yiDeEt sae m __ 2 5P Connect your camera or camcorder to sockets at the right side of your TV Connect the equipment to VIDEO and AUDIO L Q for mono equipment For stereo equipment also connect AUDIO R S Video quality with an S VHS Hi 8 or Digital camcorder is obtained by connecting the S Video cables with the S VIDEO input instead of VIDEO Q and AUDIO inputs Note If you prefer you can also connect the ca
7. equipment at the rear or on the right side of your TV Oe 90000 If you want to change to TV channels Press the cursor up down Press OK Enter the channel number of the TV channel which you want to watch with the digit keys Press the VCR DVD AMP or AUX key according to the equipment you want to operate with this remote control See Use of the remote control p 3 VCR Control keys VCR keys After you pressed the VCR key press one of the VCR keys of the remote control e for record lt lt for rewind Hi for stop gt for play gt gt for fast forward CH for sequential channel selection from the video recorder tuner 0to9 to select a channel number from your video recorder tuner These keys function with devices that uses the RC5 signalling Most of the audio and video equipment from standard our range of products can be operated with the remote control of your TV Record with your recorder with your recorder Record from MONITOR OUT You can record a programme on your recorder from the TV tuner via MONITOR OUT To record S VHS quality connect an S VHS peripheral directly to the recorder Record a TV programme You can record a TV programme using your recorder s tuner without affecting your TV Select the channel number on your recorder Set your recorder to record See the handbook of your recorder Switching channel numbers on your TV does
8. menu items are more numerous than can fit comfortably on the TV display only a portion are shown Those omitted are indicated by a cluster of balls which indicates that there are more below 6 Installation want to select or to adjust For instance see Picture menu Q Press the MENU i key to turn off the main menu Direct selection and control Menu items are controlled as soon as they are selected by the puck Only a few items require information with the OK key List controls Sound Features Picture TV 100 Hz Dig Scan Pixel Plus Digital options Double lines A list control is used to select one or more items from a list of options Press the right key to move the puck into the list At least one item is the current value and is highlighted Moving the puck up or down with the up down key causes the list to move up or down O oe Oe N COO S OOOO Menu Info Press the MENU key and select a menu item or submenu item Press the key on the remote control to get information about the selected menu item Press the key again to exit Remote Control Info Press the MENU key Press the key Press any key on the remote control except the cursor keys the OK the MENU the digit the and the keys and you get information about the pressed key The normal function of the key is not executed The moment one of the rem
9. non existent or incorrect page number Page numbers beginning with 0 or 9 do not exist Choose another number With the option line Select with the colour keys corresponding to the coloured options at the bottom of the screen the desired subject Select Picture Teletext Select a TV channel which broadcasts teletext Press E to switch the teletext on Press the GB key The screen is divided into two parts the left side for the normal main picture the right side for teletext broadcast by the selected TV channel Press the key to return to a full screen picture or press the GB key to return to a full teletext picture the teletext page correspond with the colour keys of your remote control Switch Teletext on and off Press to switch the teletext on or off The main index page appears on the screen It shows an information line at the top an option line at the bottom and a puck in the top left corner of the screen puck mm Menu o10 01 Mon 05 Feb 16 35 22 Favourite Search ER WIN 430 unaex 1u0 News 300 BBC Info 110 Headlines 305 Children 120 Weather 400 Cookery 150 Sports 415 Education 200 Radio 500 Lottery 230 Travel 550 Finance 240 Subtitling 888 Music 280 TV Listings 600 Red Green Yellow Blue Quickly run through the txt pages Press the cursor up down or the P key to run through the previous or the following pages Select the previously selected page Press the P P key No
10. not disturb recording Switch on the equipment Select the correct channel on your TV and the correct input on your recorder Set your recorder to record You record the tuner channel of the TV even when you switch to an AV input using the key on the remote control Do not switch channels or switch off your TV when you are recording through MONITOR OUT Record 19 Before Calling Service _ Calling Service Please make these simple checks before calling service These tips may save you time and money since charges for television installation and adjustments of customer controls are not covered under your warranty Items to Check and Actions to follow Ghost or double images This may be caused by obstruction to the antenna due to high rise buildings or hills Using a highly directional antenna may improve the picture No power Check that the television s AC power cord is plugged into the mains socket Unplug the television wait for 60 seconds Then re insert plug into the mains socket and switch on the television again No picture Check antenna connections at the rear of the television to see if it is properly connected to the television input terminal Is it properly secured to the appropriate antenna plug on the TV Possible broadcast station trouble Try another channel Try running the Automatic installation Adjust the contrast and brightness settings Try another smart picture setti
11. objects on top of the TV Avoid heat direct sunlight and exposure to rain or water Keep mobile telephones at a safe distance to avoid disturbances in picture and sound Insert the aerial plug firmly into the aerial socket M at the back of the TV For best picture quality use the suppressor aerial cable supplied Remote control Remove the cover of the battery compartment Sho 1 5V The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many countries exhausted batteries may not be disposed of with your household waste Please check on how to dispose of exhausted batteries according to local regulations Note this remote control functions with TVs and other equipment which use the RC6 signalling standard Insert the mains plug of the TV in the wall socket having a mains voltage of 220V 240V To prevent damaging the mains AC cord which could cause a fire or electric shock do not place the TV on the cord Switch the TV on Press the power switch on the front of your TV A green indicator on the front of the TV lights up when the screen is on If the indicator is red press the CH keys on the remote control 5 The green lamp blinks every time you press a key on the remote control uld your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV Installation Press the 4 or key to adjust the v
12. screen to indicate that the searching is going on or that the word or page is not found Select Continuous Subtitles TV channels with teletext often transmit programmes with subtitling For each TV channel you can store a subtitle page Switch on teletext and select the proper subtitle page from the index Switch off teletext Now the subtitle page is stored for the selected TV channel Select Subtitle On or Off in the Features menu see p 12 The subtitle symbol I appears when Subtitle On is selected 14 Teletext Teletext menu only available in full screen teletext mode Press the Ga MENU key to activate the menu Press the cursor up down to select the menu items Favourite This list contains up to eight favourite teletext pages Only the pages of the current channel can be selected Press the cursor right to add the current page or to select one of the favourite pages to the list Press the OK key or the cursor right again to add Press the cursor left to return to the Teletext menu Search On the keyboard on screen you can type in a word you want to search for in the teletext pages Whether upper or lowercase is used has no influence Searching for page numbers is not possible Mon 05 Feb 16 35 19 puck Menu 100 01 o Sa WORD age Cancel Accept NAME 8 Space Delete FOOTBALL A B CODIE TF Ge live Hol J KE MN 456 ONE GQURSS EU T E9 1g 14 47 VWXYZ 0
13. DIO L and R input jacks of AV1 IN G or the side connections see p 18 Monitor AVI aya 752 lt E OPSA ro a o SIS ON f 1D B CABLE Note In case of mono equipment only the left loudspeaker reproduces sound Use a mono to stereo adaptor not supplied for sound reproduction via all internal loudspeakers ig O4 a f 16 Connect Peripheral equipment Satellite Receiver HS0 O SOJO ben gt O SAT Satellite Receiver with a recorder j Connect the satellite antenna cable Q to the satellite receiver SATELLITE IN jack Connect the Video Audio left and right only for stereo equipment AV cables to the VIDEO L and R AUDIO input AV1 IN jacks If your satellite receiver has an S VHS video jack For improved picture quality connect an S VHS video cable with the S VIDEO input instead of connecting the satellite receiver to the VIDEO jack of AV2 IN Connect your satellite receiver as described above Connect the RF Antenna or Cable TV cable Q to the RF IN socket of your recorder Connect another RF cable from the output of your recorder to the TV s 75 Q Ir jack Connect the satellite antenna cable to the satellite receiver s SATELLITE IN jack Connect the AV cables to the satellite receiver s AV OUT jacks and to the VCR s AV IN jacks Connect the recorder s AV OUT jac
14. Select On timer with the cursor down VCR1 Sunday BBC1 Monday Off BBC2 ie On timer O On CNN Daily 15 45 TVE DP Select On with the cursor right Press the cursor right again to enter the programme list Select the TV channel or external you want your TV to switch to on a selected time and day Press the cursor right again to select a day of the week or to select Daily Select Daily to set the On timer for daily operation on the selected TV channel or source Press the cursor right once again to enter the time Enter the time with the digit keys or with the cursor up down left right and press the OK key to confirm Press the MENU key to turn off the y menu Note To check your timer settings press the key Teletext colour keys to select Most TV channels broadcast information via teletext This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time After each programme change the memory is refreshed It may take some time for all pages to load Depending on the TV channel teletext is transmitted in different systems The colours used in the bottom line of Select a Teletext page With the digit keys Enter the desired page number with the digit keys The page counter seeks the page or the page appears immediately when the page number has been stored in the memory A message appears when you have entered a
15. a rear sound effect See Sound menu 3D effect p 12 Note You can make the same selection in the Sound menu surround mode p 12 Zoom on off Press the zoom Q key to activate deactivate the zoom function Press the OK key repeatedly to select one of the zoom magnifications x1 x4 x9 x16 Use the cursor up down left right to shift the selected zoom window over the screen with the cursor The zoom window is reset after selecting another TV channel another picture format or when another picture format is selected automatically 4 Use of the remote control EP Picture format Press this key to summon a list of available picture formats Press this key repeatedly or press the cursor up down to select another picture format Auto format Super zoom 4 3 Movie Expand 14 9 Movie Expand 16 9 Subtitle zoom Wide screen Auto format makes the picture fill the screen as much as possible In case of subtitles in the bottom black bar Auto format makes the subtitles visible In case of a broadcaster logo in the corner of the top black bar the logo disappears from the screen Super zoom removes the black bars on the sides of 4 3 programs with minimal distortion When in Movie Expand 14 9 16 9 or Super zoom picture format you can make subtitles visible with the cursor up down no function Smart Keys To select predefined picture and sound settings D Smart Sound
16. cement Hue Smart picture Picture format Sound menu Sound TV Volume Balance Equalizer Loudness Headphone volume Surround mode Dual I II Mono Stereo Nicam Analogue 3D effect AVL Delta volume Smart sound Sound Features Press the MENU key on the remote control to summon the main menu Use the on screen Menu lnfo see p 7 for more information about the menu items Picture menu Press the cursor right to select Picture Select the menu items in the Picture menu with the cursor up down Adjust the settings with the cursor left right or enter the list of submenu items with the cursor right Select a submenu item with the cursor up down Note To remove the menu background before adjusting the picture settings see Select TV setup General p 10 Digital options With PAL signals Digital Natural motion 100 Hz Dig scan Natural motion is the most ideal setting but you may consider dependent on your own preference to select 100 Hz Dig scan 100 Hz Digital scan without motion compensation Dig Nat Motion 1250 a doubling of vertical resolution which adds astonishing sharpness motion compensation With NTSC signals The possible options are Progressive scan without motion compensation or Dig nat Motion 1250 Note if the menu item Digital options is not present first select a 4 3 picture format with the FQ key The modified adjustments for Contrast Brightness
17. e you can easily switch between up to 9 different TV channels sources In the menu system you can set Smart surf to 2 or 9 programme Press this key to select the previously viewed TV channel or source in case of a 2 programme surf or to select the surf ring in case of a 9 programme surf In case of a 9 programme surf a list appears at the right side of the screen On top the most recent programme is displayed The puck is on the channel number currently viewed Press the P P key to turn to the next channel in the list or press cursor up down to immediately select the desired TV channel of the list To add a new channel or source tune to the channel or source you wish to add Press the P P key Press the cursor right to add If there are already nine channels sources in the list the one at the bottom of the list will be To remove a channel or source select the channel number you want to remove Press the P P key Press the cursor right to remove Press the OK key or wait for the time out to dismiss the Smart surf display Time display The time is displayed on the screen Teletext function p 14 5 Surround mode Incredible surround With stereo transmission and when Incredible surround is selected it seems as though the loudspeakers are spread further apart from one another Virtual Dolby surround Optimal with Dolby surround signals Enables you to experience the effect of Dolby Surround Pro Logic reproducing
18. ecial is available or not Press the cursor right to enter the keyboard Press the cursor up down left right to select the first character and press OK Reshuffle the programme list It is possible to change the name stored in the memory or to assign a name to a TV channel for which a name has not yet been entered A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99 For example SUPER BBC1 Before programme number 0 you can also enter a name for the peripherals that are connected to an external input Repeat for every character you want to enter Select Space to enter a space Delete to erase the highlighted character in the name entered Shift to display upper or undercast characters on the keyboard Special when available to display special characters on the keyboard Press OK to confirm Press the cursor left repeatedly when you have finished the name giving of the selected channel or peripheral Select another programme number and repeat steps to O According to your preference you can change the order of the stored TV channels Select Reshuffle in the Install menu and press the OK key Follow the instructions on screen Select Favourite TV channels Select Favourite programmes in the Install menu Select your programme number with the cursor up down Select Yes or No with the cursor right Repeat and for every TV channel or external you want to ma
19. for the selected TV channel Once subtitles have been stored and Subtitle On has been selected they will automatically be displayed on the selected TV channels if subtitles are in the transmission A symbol will indicate that the mode is on Select On during mute when you want to have the subtitles automatically displayed when the sound has been muted with the nK key on the remote control Child lock Select Child lock with the cursor down Press the cursor right to enter the Child lock menu You re summoned to enter your code Enter the access code Note You have to re enter your code each time you enter the child lock menu Important You have forgotten your code Select Cancel with the cursor down e Select Set Change code in the Setup menu See General menu Set Change code p 10 e Press OK e Press the cursor right and enter the overriding code 8 8 8 8 e Press the cursor again and enter a new personal 4 digit code The previously code is erased and the new code is stored Note The overriding code only works in the Set Change code menu 12 Use of the menus Select one of the menu items of the child lock menu e Select Lock if you want to lock all channels and externals e Select Custom lock and press the cursor right Select Programme lock if you want to lock the programmes from a certain TV channel or external e Select Unlock to unlock all locked channels and externals at once On timer
20. he menu system Press the MENU i key on the remote control to summon the main menu Note Should your remote control be lost or broken you can still use the keys on top of the TV See p 2 2 Use the cursor in the up down direction to select the TV Settings Install or Demo menu Note Sometimes not all the menu items are visible on the screen Press the cursor down to reveal all items Use the cursor left right to select the menu item Use the cursor up down again to select the control you 000A 90000 Os return or switch O z main menu on off LKOT Q al ae to A N I justments OS OK key to activate i The menu system Pipes balls and a puck puck A n Pa pipes s N balls we ty The hierarchy of menus and controls is represented by an animated visual mechanism of pipes balls and a puck Unlike a map however the animated mechanism constantly shows the current whereabouts continually expands the view of the immediate neighbourhood The puck surrounds the ball indicating the user s current position in the menu hierarchy The puck is always present when the menu system is displayed The puck is divided into 4 parts They correspond to the directional controls up down left right on the remote control The arrows on the cursor indicate which directions to choose In this way users can navigate through the menu hierarchy to the control they wish to adjust When
21. he remote control sensor lens on the television Operating range between television and the remote control should not be more than 240 You can still use the M key and the keys at the top of your TV Press the key to be sure your remote control is in the TV mode Never attempt to repair a defective TV yourself Check with your dealer or call a TV technician 20 Before calling service i gt Care of the screen Clean the TV with a slightly damp soft cloth Do not use abrasive solvent as it can damage the TV screen End of life directives We are paying a lot of attention to using environmentally friendly production methods Your new TV contains materials which can be recycled and reused At the end of its life specialised companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials that must be disposed Please ensure that you dispose of your old TV according to local regulations How to dispose of batteries The batteries supplied do not contain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations Cosa J SOS lt CSC C lt CSCSt Active Control Measures and corrects incoming signals in order to provide the best picture quality settings AVL Automatically controls the volume level to avoid to
22. ke a favourite or a non favourite TV channel or external O To exit the Favourite programmes menu keep the cursor up pressed install TV Setup _ TV Setup General This menu allows you to change various settings that are presumably General adjusted less frequently than most other settings Setup Press the key on the remote control to get information about the Menu background selected menu item Smart surf ee Auto Surround OSD Sometimes the broadcaster transmits special signals for Surround Sound Channel title encoded programmes The TV automatically switches to the best surround Teletext level 2 5 sound mode when Auto Surround is switched On Auto Surround Set Change code Colour PLL Select Set or Change code with the cursor down 2 If no code exists yet the menu item is set to Set code Follow the instructions on screen If a code has previously been entered the menu item is set to Change code Follow the instructions on screen All number combinations from 0000 to 9999 are valid numbers Set Change code Source Press the cursor down to select one of the external inputs Source Press the cursor right to enter the list of names of peripherals attached to the selected input Setup Select the peripheral device with the cursor up down Once you have selected the source e g VCR this AV input will automatically be selected when your remote control is inVCR mode and when you press the key o
23. ks to the TV s AV2 IN jacks DVD player or other accessory digital source equipment Monitor AV1 AV2 in out in 1Q O D O leven AUDIO Ph 00 00 Equipment with AV connectors only Connect the video cables to the equipment s AV OUT jacks and to the TV s AV1 or AV2 IN jacks Connect the audio cables to the equipment s AUDIO L and R jacks and to the L AUDIO and R AUDIO AV1 or AV2 jacks on the TV According to where you connected the video cables to AV1 or AV2 Equipment with an S VIDEO connector Connect an S video cable the AV2 S VIDEO input Note When using the S VIDEO connector do not connect any device to the video input Connect the audio cables to the equipment s AUDIO L and R jacks and to the L AUDIO and R AUDIO AV jacks on the TV With Component Video Output Connectors Connect the cables of your YPbPr equipment to the YPbPr input AV1 IN sockets on the TV Note When using the YPbPr sockets do not connect any device to the video input of AV1 The YPbPr sockets on the TV are compatible with 480i interlaced 1 Fh output signals only not 480p progressive scan 2 Fh Connect the Audio left and right only for stereo devices cables to the AUDIO L and R input of AV1 Equipment with Progressive scan output 480p 576p or 1080i 2 Fh Connect the equipment to the AV3 or AV4 IN jacks on the TV See AV3 or AV4 Digital HD input next
24. mcorder to one of the TV s rear AV IN jacks Connect the equipment with 2 Fh RGB output to the RGB connector and to the L and RAUDIO jacks of AV3 Connect the equipment with 2Fh YPbPr output to the Y Pb and Pr jacks and to the L and RAUDIO jacks of AV4 See also the manual of your High Definition equipment Inputs AV3 and AV4 also allow horizontal and vertical picture shift using the remote control cursor left right up down Note 60 Hz normally refers to USA markets and 50 Hz to UK Europe and Australian markets The AV3 RGB D 15 connector will accept only the signal standards 480p 60 Hz 1080i 50 Hz and 1152i 50 Hz and is only for TV standards It is not a PC connector Warning in case you notice scrolling images wrong colours or no colour no picture or even combinations of these on your screen check if the connections are done in the right way Headphone Insert the plug into the headphone socket at the right side of the TV Press 1K on the remote control to switch off the internal loudspeakers of the TV The headphone impedance must be between 8 and 4000 Ohm The headphone socket has a 3 5 mm jack In the SOUND menu select Headphone volume to adjust the headphone volume 18 Connect Peripheral equipment To select connected equipment Equipment connected to the rear or on the right side of the TV 0 Press the key to select AV1 AV2 AV3 AV4 or SIDE according to where you connected your
25. n the remote control See p 19 This menu allows you to select the peripheral you connected to one of the external inputs Select Source with the cursor right Demo menu If Auto demo has been selected the demo will e TV automatically present all the features Setup sequentially in a loop Demo Auto demo Press one of the cursor keys to stop the Auto Install demo If one of the features has been selected this particular feature demo will run one time only until activated again and the Demo menu will reappear Dealer demo Digital options Light sensor SC ome niter Select Dealer Demo The Demo menu allows to demonstrate the TV Select Digital options Light sensor and features separately or in a continuous loop Comb filter On or Off to really see the difference in picture quality Select Demo in the Main menu with the In Dealer Demo mode it is possible to change cursor down channels with CH and to adjust the volume Select Auto demo or one of the features with Note the Dealer Demo is not part of the the cursor right and press the OK key on the automatic sequence and can only be activated remote control separately 10 Use of the menus ell OOOO QQ000 OSI elisa TZAL oQ return or switch main menu on off cursor to select adjustments OK key to i activate Picture TV Contrast Brightness Colour Sharpness Tint Digital options Dynamic contrast DNR Colour enhan
26. ng Check the key on the remote control to make sure the correct signal source is selected Good picture but no sound Increase the VOLUME Check that the TV is not muted press the mK key on the remote control When no signal is detected the television automatically switches off the sound This is proper operation and does not indicate a malfunction If you have attempted to hookup peripheral equipments check the audio jack connections Check if the headphone is not plugged in Check if the channel is broadcasting good quality surround Good sound but poor colour or no picture Adjust the contrast and brightness setting Try another smart picture setting Poor picture Snowish picture and noise Sometimes poor picture quality occurs when having activated an S VHS camera or camcorder connected to the right side of your TV and another device is connected to AV1 or AV2 at the same time In this case switch off one of the other equipments Check the antenna connection Horizontal dotted line This may be caused by electrical interference hairdryer nearby neon lights Switch off the equipment One white line across the screen Switch off the television immediately and consult a qualified service personnel Television not responding to remote control If your problem is not solved Turn your TV off and then on again Check whether the batteries are working Replace if necessary Clean t
27. o large level differences especially during commercial breaks DNR Digital Noise Reduction By encoding signals digitally in 100 Hz sets it is possible to clean up picture noise This is especially beneficial in poor signal areas and when viewing poor quality video tapes Display An on screen message or graphics that help the user operate and adjust TV feature controls See On Screen Displays OSD Hue TY function to modify the general colour balance between cool and warm and to adjust it according to your personal preference Menu An on screen listing of feature controls shown on the TV screen that are made available for user adjustments Picture and Sound Controls Keys on the remote control to select predefined picture and sound settings The Eco picture mode is intended to lower power consumption of the TV and to improve picture quality of low quality digital sources Picture Freeze TV mode which allows you to freeze a certain image in order to study a specific detail at ease e g to make notes of certain programme information like phone numbers Programming The procedure of adding or deleting channel numbers into the TV s memory circuits In this way the TV remembers only the locally available or desired channel numbers and skips over any unwanted channel numbers Tips amp Glossary 21 Specifications o 32PW8808 Picture tube size 32 740 mm Picture visible area
28. olume Press the CH and key to browse through the TV channels or sources stored and to select them Press the M key to summon the main menu Use the 1 and keys to select the menu items in the horizontal axis Use the CH and keys to select submenu items in the vertical axis Note Sometimes not all the menu items are visible on the screen Press the CH key to reveal all items Exit lets you dismiss the menu Select Exit and press the M key Installation Use of the remote control Use the on screen info for more information about the different keys See p 7 Select peripherals Press this key repeatedly to select AV1 AV2 AV3 AV4 or SIDE according to where you connected the peripherals p 19 VCR DVD AMP AUX Press one of these keys to use the remote control directly in the video recorder DVD amplifier or other auxiliary mode CD SAT A green indicator lights up To return to TV mode press the key again or wait for the indicator to dim 20 sec GB Dual screen e Press the QB key to switch on Sa Dual screen The screen is divided into 2 parts the left side for the normal main picture the OIC right side for teletext broadcast by the selected TV channel i To operate teletext see p 13 e Press the key to select a vertical squeezed or a non vertical squeezed picture size e Press CH to run through the teletext pages e When in Teletext Dual screen
29. ot possible to display a timed page when the TV is switched to standby Teletext 15 Connect Peripheral equipment There is a wide range of audio and video equipment that can be connected to your TV The following connection diagrams show you how to connect them to the back or the right side of the TV AV1 IN can handle CVBS and YPbPr AV2 IN CVBS and Y C AV3 and AV4 IN digital signals of a e g digital HD receiver or Progressive scan DVD SIDE CVBS and YIC Recorder Connect the RF Antenna Q to the RF IN socket of Ke your recorder inete Connect another RF cable from the output OUT of your recorder to the TV s input 75 Q F jack Doom Better playback quality can be obtained if you also gt connect the Video Audio Left and Right only for stereo evo equipment AV cables G to the VIDEO AUDIO L and gt R input jacks of AV2 IN our If your recorder has an S VHS video jack N For improved picture quality connect an S video cable with the S VIDEO input instead of connecting the recorder to the VIDEO jack of AV2 IN S Video does not provide audio so audio cables must still be connected to provide sound Recorder and other A V peripherals Connect your recorder as described above The MONITOR OUT connectors can be used to record programmes from your TV See Record with your recorder p 19 O Connect the Video Audio left and Audio right only for stereo equipment cables to the VIDEO AU
30. ote control keys which do not invoke remote control info is pressed remote info is cancelled Press the key to display the menu that was on screen before a remote control key for info was pressed Select the menu language _ the menu language 6606 Install Press the MENU i key on the remote control Use the cursor down to select Install Use the cursor right to select Language Follow the instructions on screen Use the cursor up down to select your preferred language and press the OK key to confirm your selection Q Proceed with the Install menu Installation 7 Store TV channels_ TV channels You can now search for and store the TV channels in two Automatic install different ways using Automatic Installation or Manual Installation Install tuning in channel by channel Select your choice with the cursor right Install Start Automatic installation 0 Select Automatic installation in the Install menu Note All channels must be unlocked in order to autoprogram If requested enter your PIN to unlock all channels See TV Features menu Child lock p 15 2 Press the cursor down The autoprogramming option label Start appears Press the cursor right oo The message Searching appears and the progress of autoprogramming is displayed Manual installation Manual installation Install System Channel Search Fine tune Store Searching for and sto
31. press the key to return to a full picture screen or press the GB key to return to a full Teletext screen e Freeze To activate de activate the frozen picture and to hold a teletext page See p 14 no function 90000 Screen information Press to display information about the selected TV channel and programme Menu Remote Control information 4 Standby The set is switched off and the red indicator lights up To switch the TV on again press again lt lt E gt gt gt Video recorder see p 19 fo no function Teletext on off p 13 Main menu on off p 11 OK Press this key to activate your choice when in the menus lt 1 Press or to adjust the volume nk Interrupt the sound or restore it CH Programme selection To browse through the TV channels and sources stored Only those channels which are in the favourite list can be selected with the CH keys 0 9 Digit keys To select a TV channel For a two digit programme number enter the second digit within 2 seconds To switch immediately to a selected one digit TV channel keep the digit key pressed a bit longer When the menu is on screen press to display info on the selected menu item While the menu info is displayed press any key to display remote control info See p 7 Use of the remote control 3 fe PaP Smart surf removed With this featur
32. ring TV channels is done channel by channel You must go through every step of the Manual Installation menu Press the key on the remote control to get information about the selected menu item 8 Installation When the Automatic installation is complete the puck navigates to Install again The programme list is automatically filled with all the programme numbers of the TV channels transmitted Note Channel numbers and names will always be written in Latin characters even when a language has been selected which uses other characters Select Manual installation in the Install menu Press the cursor down Follow the instructions on screen Note Search or direct selection of a TV channel If you know the frequency enter the 3 digits of the frequency directly with the digit keys O to 9 e g 048 Press the cursor down to proceed Repeat to search for another TV channel Give name VCR1 8 Space Delete BBC1 ABCDEFG 1 28 BBC2 HIJKLMN 456 OP Gk S TU 7 89 enn VWXYZ 0 TVE Poses Shift Special Select Give Name in the Install menu and press the cursor down Select the programme number Note keep the cursor up down pressed to scroll through the programme list and to avoid that the TV tunes to each channel passed by Press the cursor right A keyboard appears on the screen Only European characters are displayed Note Dependent on the language selected in the language menu the key Sp
33. rvice organisation will also provide Service although there may be a delay if the appropriate spare parts and technical manual are not readily available These statements do not affect your statutory rights as a consumer In the event of difficulty please contact the Philips Information Centre in any country see enclosed addresses 2 Specifications Printed on recycled paper Printed in Belgium 3104 315 21 58 3
34. te Only possible when teletext pages are active not when the Teletext menu is displayed Select the index teletext page Press the grey colour key gt gt to display the main index usually p 100 Select subpages When a selected teletext page consists of different subpages one of the subpages appears on the screen Press the cursor right to highlight the subpagenumber Press the cursor up down to select the next or previous subpage or enter the subpagenumber with the digit keys Use of the menus 13 Special teletext functions Hold Press bi to stop the automatically rotating of the subpages or to stop the page counter from seeking when you have entered a wrong page number or when the page is not available Enter another page number Enlarge Press repeatedly to display the upper part the lower part and then to return to the normal page size When the upper part is displayed you can scroll the text line by line using the cursor up down Hypertext With hypertext you can select and search for pages containing any word or number on the current teletext page Make sure you are not in the teletext menu and that the puck is in the upper left corner of the screen Press the cursor key down to highlight the first word or a number on the page Use the cursor up down left right to select the word or number you want to search for Press the OK key to confirm A message appears at the bottom of the
Download Pdf Manuals
Related Search