Philips 21PT9470/44 CRT Television User Manual
Contents
1. be used to connect a device to your TV depending on availability and your needs Connect devices Connect a video player AV sockets on rear of TV L AUDIO R 8S SS PLAY en DVD Connect a video recorder AV sockets on the rear of TV VCR with Video and Audio input sockets Connect a video recorder and a set top box Ke sockets on rear of TV pen nt a 8 om Cable om 2 2 m VCR with Video and Audiol output sockets oC E i Set top box Insert remote control batteries 4 Install channels Automatically install channels This section describes how to search and store channels automatically Note ake sure the TV is in TV mode 30 Press MENU Select Install gt Auto Program Press P to start auto search BWN Press MENU to exit and return to the previous menu Manually install channels This section describes how to search and store analog TV channels manually Note e Make sure the TV is in TV mode Press MENU Select Install gt Manual gt Channel No Press lt P or the numeric buttons to key in the channel number Press to select Color System Press lt gt to select your desired color system Press V to select Fine Tune Press lt gt2. quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set EN 11 English Sound issues There is picture but no sound from the TV e Check that all cables are properly connected e Check that the volume is not set to 0 e Check that the sound is not muted There is picture but sound quality is poor e Check that the sound settings are correctly set There is picture but sound comes from one speaker only e Verify that sound balance is set to the center Contact us f you cannot resolve your problem refer to he FAQs for this TV at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country PN Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty e Make a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging 12 EN 8 Product information Product information is subject to change without notice For detailed product information go to www philips com support Picture Diagonal screen size 53cm Visible diagonal screen size 51cm Tuner Reception Transmission e Antenna input 5ohm coaxial e TV system PAL M PAL N NTSC M e Video playback NTSC PAL
3. Register your product and get support at www philips com welcome 21PT 9470 44 21PT9470 55 EN User manual PHILIPS 1 Important Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply Safety Risk Risk Risk of electric shock or fire ever expose the TV to rain or water ever place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from he power outlet immediately Contact Philips Consumer Care to have the TV checked before use ever place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times ever insert objects into the ventilation slots or other openings on the TV of short circuit or fire ever expose the remote control or batteries to rain water or excessive heat Avoid force coming onto power plugs Loose power plugs can cause arcing or fire of injury or damage to the TV Two people are required to lift and carry a TV that weighs more than 55 Ibs Ifthe TV is transported in temperatures below 5 C unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet Risk Before you connect the TV to the power o
4. Remote control e Batteries 2 x AAA LRO3 type Connections e CVI e CVBS In e Monitor Out e Antenna e _ Side CVBS In Power e Mains power AC 110 240V 50 60Hz Power consumption 74W Standby power lt 3W EN 13 English 9 Notice 2010 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system f the product or its individual modules or procedures are used for purposes other than hose specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Philips cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to Philips will be adapted and published on the Philips support website as soon as possible Warranty o components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centres and official repai
5. atch connected devices Use the source button ACTIVECTRL SAP cc TAS EE STEREO NER SURA EAS Press AV repeatedly to cycle through the various sources Adjust TV volume EN NN f 5 BI vor i2 so ch 1 os I DK A V To increase or decrease volume e Press VOL e Press at the front of the TV e Press amp to mute the sound e Press amp K again to restore the sound 6 Use more of your product Access TV menus Menus help you to install channels change picture and sound settings and access other features Press MENU L gt The menu screen appears MAIN a v Picture gt Brightness E Sound Color E Features Contrast E Install Sharpness Color Temp Contrast 2 Press the AVP to select and navigate through one of the following menus e Picture Adjusts the picture setting for optimal viewing e Sound Adjusts the sound setting e Features Accesses features e Install Selects the channel installation menu 3 Press OK to confirm your choice Change picture and sound settings Change picture and sound settings to suit your preferences You can apply pre defined settings or change settings manually Use smart picture Use smart picture to apply pre defined picture settings d Press O SMART repeatedly to cycle through the four settings e Personal S
6. ction of batteries because correct disposal helps to prevent negative consequences for the environmental and human health 2 Your product Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome Product overview This section gives you an overview of commonly used controls and functions Remote control 2 e ACTIVE CTRL SAP Q0 SLEEP TIMER a aA OOGO H FA lol Y J i N OC i PHILIPS TELEVISION O OB Power e Switches the TV to standby if it is on Switches on the TV if it is in standby Close caption Displays closed captions settings AV Selects connected devices Stereo Switches Stereo and Nicam Stereo to Mono INCR SURR Not used A CH Toggles between the current channel and the last viewed channel MENU Toggles the main menu on or off AV lt gt Navigation buttons Navigates menus SMART Smart picture Cycles through pre defined picture settings sk MUTE Mutes or restores audio output CH Channel Switches to the next or previous channel 0 9 Numeric buttons Selects a channel or setting Not used Not used OSD Displays program information if available VOL Volume Increase
7. es are images that remain on screen for extended periods of time Examples include on screen menus black bars and time displays If you must use stationary images reduce screen contrast and brightness to avoid screen damage e Unplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e Risk of damage to the TV screen Never touch push rub or strike the screen with any object e To avoid deformations and color fading wipe off water drops as soon as possible Disposal of your old product and batteries s Your product is designed and manufactured with high quality materials and components which can be recycled and reused K When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health K Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate colle
8. ettings are set to your preference e Soft Emphasizes warm colours This setting is suitable for dimly lit rooms e Natural Emphasizes original colors e Rich Emphasizes vibrant colours This setting is the optimal setting when you are viewing TV programmes in a brightly lit room 2 Press to exit Manually adjust picture settings 1 Press MENU 2 Press the navigation buttons to enter the Picture menu 3 Press AVP to select from the following settings and adjust e Brightness Adjusts the intensity and details of dark areas e Color Adjusts color saturation e Contrast Adjusts the intensity of bright areas keeping dark areas unchanged Sharpness Adjusts the level of sharpness in image details EN 9 English e Color Temp ntroduces more orange tones or blue tones to the picture e Contrast Optimizes the total contrast for improved picture quality Use smart sound Use smart sound to apply pre defined sound settings Use timers You can set timers to switch the TV to standby at a specified time Set the time 1 Press MENU 2 Select Features gt Timer gt Time 3 Press the numeric buttons to set the time 4 Press to exit 1 Press SMART repeatedly to cycle through the four settings e Personal Settings are set to your preference e Voice Emphasizes high tones treble boosted e Theater Emphasizes sen
9. r shops Failure o do so shall void any warranty stated or implied Any operation expressly prohibited in his manual any adjustments or assembly procedures not recommended or authorised in his manual shall void the warranty 14 EN Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals One of Philips leading Business Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Copyright All other registered and unregistered trademarks are the property of their respective owners PHILIPS 2010 Koninklijke Philips Electronics N V All rights reserved Document order number 0700 21SL9001 00
10. rectly inserted according to the orientation e Replace the remote control batteries if hey are flat or weak e Clean the remote control and TV sensor ens The standby light on the TV blinks red e Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care The TV menu is in the wrong language Change the TV menu to your preferred anguage When turning the TV on off to standby you hear a creaking sound from the TV chassis o action is required The creaking sound is normal expansion and contraction of he TV as it cools and warms up This does not impact performance Picture issues The TV is on but there is no picture e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source There is sound but no picture e Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is properly connected to the TV Loud speakers unearthed audio devices neon lights high buildings and other large objects can influence reception quality f possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e If reception on only one channel is poor fine tune this channel There is poor picture
11. s or decreases volume 2 SMART Smart Sound Cycles through pre defined sound settings Not used EN 3 English SLEEP Sets a delay after which the TV switches to standby TIMER Sets the timers Qt Not used Q2 SAP Selects Secondary Audio Program SAP stereo or mono Controls and indicators O Switches the product on or off Standby indicator Remote control sensor Increases or decreases volume OOOO V A Switches to the next or previous channel Back connectors Monitor out VIDEO COMPONENT VIDEO INPUT Q TV ANTENNA Signal input from an antenna cable or satellite MONITOR OUT Audio and video output to analog devices such as another TV or a recording device GB AV IN VIDEO and AUDIO L R Analog audio and video input from analog or digital devices such as DVD players satellite receivers and VCRs Component Video Input YPbPr Video input from analog devices such as DVD receiver game console etc This connector is used with audio input Side connectors VIDEO in 1 Ok AUDIO in 2 4 VIDEO IN Composite video input from analog devices such as VCRs AUDIO IN L R Audio input from analog devices connected to VIDEO EN English 3 Get started Connect devices This section describes how to connect various devices with different connectors Note e Different types of connectors may
12. sation to action bass and treble boosted e Music Emphasizes low tones bass boosted 2 Press to exit Adjust sound settings Press MENU 2 Press the navigation buttons to enter the Sound menu 3 Press Av to select from the following settings and adjust e Treble Adjusts the treble level e Bass Adjusts the bass level e Balance Adjusts the balance of the right and left speakers to best suit your listening position System Sets system sound Set timer options 1 Press MENU 2 Select Features gt Timer 3 Press AV to select from the following options and adjust e Start Time Sets the time for the TV to turn on from standby e Start Channel Sets the channel when the TV is turned on from standby e Switch Time Sets a time for the TV to switch to another channel e Switch Channel Sets a channel to switch to when the TV is programmed to switch to another channel e Stop Time Sets a time for the TV to switch off e Activate Activates the timer 4 Press to exit 7 Troubleshooting This section describes commonly encountered issues and accompanying solutions General TV issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected The remote control is not working properly e Check that the remote control batteries are cor
13. to adjust Press V to select Store Press lt gt to select Stored Press to select Skipped Press to select On to skip channel Oo N BDO Wu A WW N Press MENU to exit and return to the previous menu EN English 5 Use your product This section helps you perform basic operations see Use more of your product on page 9 Switch your TV on off or to standby To switch on e Ifthe standby indicator is off press at he front of the TV e Ifthe standby indicator is red press on he remote control To switch to standby e Press on the remote control L gt The standby indicator switches to red To switch off e Press at the front of the TV L gt The standby indicator switches off ACTIVE CTRL SAP cc AV Oc FA IOOO SLEEP TIMER STEREO INCRSURR Tip e Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time disconnect the TV power cable from the power outlet Switch channels E3 P B 4 Jr A ane gt at NJS cy OO MC Jo I WI Ke lan s 0 le Sf OO dd a 2 ew J te e Press CH on the remote control or V A at the front of the TV e Enter a channel number using the Numeric buttons W
14. utlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is different of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children Risk Risk ever place the TV on a surface covered by a cloth or other material that can be pulled away Ensure that no part of the TV hangs over he edge of the surface ever place the TV on tall furniture such as a bookcase without anchoring both he furniture and TV to the wall ora suitable support Educate children about the dangers of climbing on furniture to reach the TV of overheating ever install the TV in a confined space Always leave a space of at least 4 inches or 10 cm around the TV for ventilation Ensure curtains or other objects never cover the ventilation slots on the TV of injury fire or power cord damage ever place the TV or any objects on the power cord To easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord at all imes When you disconnect the power cord always pull the plug never the cable Disconnect the TV from the power outlet and antenna before lightning storms During lightning storms never ouch any part of the TV power cord or antenna cable EN 1 English Screen care e Avoid stationary images as much as possible Stationary imag
Download Pdf Manuals
Related Search