Philips 19PFL3403/77 Flat Panel Television User Manual
Contents
1. lt f 2 2 AC IN 8 LS a To disconnect the TV from the power Disconnect the TV from the power in one of the following ways e Unplug the power cord from the power connector at the back of the TV e Unplug the power cord from the power socket outlet Pull the power cord by the plug do not pull on the power cord Insert the remote control batteries 1 Slide the battery cover off the back of the remote control 2 Insert the 2 supplied batteries AAA Be sure the and ends of the batteries line up with the markings inside the case 3 Slide the cover back into position EN 11 Remove the batteries if you are not going to use the remote control for an extended period of time 12 EN 5 Use your TV This section helps you perform basic TV operations Switch your TV on off or to standby CHANNEL e win To switch on e Ifthe standby indicator 2 is off press POWER 1 at the side of the TV e Ifthe standby indicator 2 is red press on the remote control To switch to standby e Press on the remote control L gt The standby indicator 2 switches to red To switch off e Press OPOWER 1 at the side of the TV Switch channels e Press CH or key in the number on the remote control e Press CHANNEL on the side of the TV Adjust volume T2. This information is correct at the time of press For updated contact information refer to www philips com support 30 EN PHILIPS 2008 Koninklijke Philips Electronics N V All rights reserved Document order number
3. Tuner Mode System Auto Program gt Fine Tune 193 25Mhz Press and select System Press lt 4 or gt and select AUTO PAL M PAL N or NTSC PHILIPS Picture oO Sound Features Antenna NTSC Tuner Mode System Auto Program gt Fine Tune 195 30Mhz Press to highlight Auto Program and press OK e The TV detects the Antenna or Cable signal that you have selected and search for all the available channels e When the search completes the TV switches to the first channel found Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Fin e tune channels You can manually fine tune channels when the reception is poor 1 Press CH or use the number keys to select the channel to fine tune 2 Press MENU BACK and select Install gt R PHILIPS Ch Setup gt Fine Tune Picture Sound Features 3 Press lt 4 or gt to adjust the frequency To setting Current Channel 30 H In List Off B PHILIPS Picture Sound Features 5 Press MENU BACK to return to the System Auto previous menu or press STATUS EXIT to Auto Program gt Fine Tune 195 30Mhz Tuner Mode Antenna exit 4 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Exclude channels from a list You can exclude a channel from your list of channels Excluded channels are not accessed when you press CH on the remote co
4. If you receive channels through a set top box or cable box connected by HDMI you cannot use the TV ratings lock Your set top box or cable box must be connected through RF or AV connectors 1 Access the Parental Control menu 2 Press and select TV Rating 3 Press OK EN 19 4 Press v to highlight a rating and press OK Summary of TV ratings to select View or Block Age rating Content rating B PHILIPS Al None Picture Install None None Ai TV Y Appropriate for children of None y all ages with themes and elements y V suitable for children aged 2 6 v TV Y7 Programs designed for FV y children age 7 and older Fantasy v Violence TV G Programs suitable for all None ages These programs contain little When you block a rating all ratings in the or no violence no strong language younger age categories are automatically and little or no sexual dialog or blocked situations 5 Press MENU BACK to return to the TV PG Programs contain D previous menu or press STATUS EXIT to elements that some parents Dialog exit may find unsuitable for younger L children and which may need Language parental guidance The program S Sex may contain moderate violence _ V sexual dialog and or situations and Violence some strong language TV 14 Programs contain elements D that may not be suitable for Dialog children under 14 years of age L These programs include one or Lan
5. 2 Press OK B PHILIPS Picture Sound Install RE nn 50 Horizontal Shift Vertical Shift 3 Press A or to select an item Press lt 4 or gt to adjust the setting Press MENU BACK to return to the previous menu or press STATUS EXIT to exit The following display settings can be configured when an HD device is connected to the TV e Horizontal Shift and Vertical Shift Adjusts the horizontal and vertical position of the picture Ui A EN 25 English 9 Install channels The first time you setup your TV you are prompted to select a menu language and to install TV and digital radio channels if available This chapter provides instructions on how to reinstall and fine tune channels Select your language O Press MENU BACK and select Install gt Language l PHILIPS Picture Sound Features Language Ch Setup List gt Fav Channel gt English gt Press lt or gt to select a language then press OK QG Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Automatically install channels This section describes how to search and store channels automatically Instructions are for both digital and analogue channels 1 Press MENU BACK and select Install gt Ch Setup gt Tuner Mode 2 Press 4 or and select Antenna or Cable 26 EN PHILIPS B Picture AW B Sound Features Antenna Auto
6. Features Install Smart Sound Personal Treble Bass Balance AVL MTS 4 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Summary of sound settings Smart Sound Pre defined sound settings to suit your listening environment e Treble Adjusts the high frequency sound levels e Bass Adjusts the low frequency sound levels e Balance Adjusts the balance of the right and left speakers to best suit your listening position e AVL Reduces sudden changes in volume for example during commecials or when switching channels Set on or off e MTS Multi channel TV sound Select mono stereo or a Secondary Audio Program SAP Use smart sound settings You can use smart sound instead of the manual sound settings to set your TV to a predefined setting The settings are pre defined to suit different listening environments Press MENU BACK and select Sound Press OK Press Y to highlight Smart Sound and press lt or P to select a setting Press MENU BACK to return to the previous menu or press STATUS EXIT to exit A WN Tip e Toggle SMART SOUND to access the settings The following settings are pre defined to match your listening environment e Movie e Music e Voice e Personal Use Back Light Adjust the brightness of the TV backlight to suit your surrounding ambient lighting 1 Press MENU BACK and select Features
7. Principles is to take all necessary health and safety measures for our products to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products Philips is committed to develop produce and market products that cause no adverse health effects Philips confirms that if its products are handled properly for their intended use they are safe to use according to scientific evidence available today Philips plays an active role in the development of international EMF and safety standards enabling Philips to anticipate further developments in standardisation for early integration in its products Copyright VESA FDMI and the VESA Mounting Compliant ogo are trademarks of the Video Electronics Standards Association Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world All other registered and unregistered trademarks are the property of their respective owners 2 Important Read this user manual before you start to use his product Pay close attention to this section and follow he safety and screen care instructions The product warranty does not apply if damage is caused by failing to follow these instructions The model and serial number of your TV can be found on the back of the TV as well as on he packagin
8. e Color Temp Makes colors more vivid and improve the resolution of details in bright colors You can switch this feature on or off e Noise Reduction Filters and reduces noise in an image Use smart picture settings You can use smart picture instead of the manual picture adjustments to set your TV to a predefined setting The settings are pre defined to suit different viewing environments Press MENU BACK and select Picture Press OK Press to highlight Smart Pic and press lt or P gt to select a setting Press MENU BACK to return to the previous menu or press STATUS EXIT to exit A WN Tip e Press O SMART PIC on the remote control repeatedly to toggle the available settings The following settings are pre defined factory settings to match your viewing environment e Rich e Natural Soft e Personal Change picture format 1 Press MENU BACK and select Features gt Format Press 4 or to select the following picture formats Tip Toggle EB FORMAT on the remote control to access the formats 4 3 Shows the classic 4 3 format Widescreen Stretches the classic 4 3 format to 16 9 Adjust sound settings This section describes how to adjust sound settings 1 Press MENU BACK and select Sound 2 Press OK 3 Press A or to select an item and press or P to adjust the setting B PHILIPS Picture
9. reset your PIN if you have forgotten it 1 Press MENU BACK and select Features gt Parental Control 2 Press OK L gt You are prompted to enter a password 3 Enter your 4 digit PIN on the number keys of the remote control e If you have never set your PIN before enter 0000 e If you have set your PIN but have forgotten it enter 0711 The Parental Control menu is displayed Select Change Password and press OK Enter a new PIN and then enter the PIN again to confirm 6 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Ui A Turn on parental control 1 Press MENU BACK and select Features gt Parental Control 2 Press OK L gt You are prompted to enter your password English 3 Enter your PIN on remote control e If you have never set a PIN before enter 0000 e If you have forgotten your PIN reset it see Change your password on page 19 The Parental Control menu is displayed D PHILIPS Picture Sound Install Change Password gt Parental Control off TV Rating gt Movie Rating gt 4 Press to highlight Parental Control and gng press P to turn on Parental Control Use TV ratings lock Your TV is equipped with a V chip that allows you to control access to individual programs based on their age rating and content rating The program content advisory data are from the broadcaster or by the program provider
10. Register your Ape and wel at weicome www philips com 19PFL3403 77 EN User manual 3 PHILIPS Contents 1 Notice 4 2 Important 5 Safety 5 Screen care 6 Environmental care 6 3 Your TV 7 TV overview 7 Remote control 8 4 Get started 10 Position the TV 10 Wall mount the TV 10 Connect the antenna cable 10 To connect the power cord 11 Insert the remote control batteries 11 5 Use your TV 13 Switch your TV on off or to standby 13 Switch channels 13 Adjust volume 13 6 Use more of your TV 14 Adjust picture and sound settings 14 Use timers 16 Create and use lists of favorite channels 17 View closed captions subtitles 18 Use child control and rating locks 19 7 Use your TV as a PC monitor 23 Configure your TV in PC mode 23 Adjust display settings for PC mode 23 8 Use your TV in HDTV mode 24 Configure your TV in HD mode 24 Adjust display settings in HD mode 24 9 Install channels 26 Select your language 26 Automatically install channels 26 Fine tune channels 26 Exclude channels from a list 27 10 Troubleshooting 28 11 Product information 29 EN 3 English 1 Notice 2008 Koninklijke Philips Electronics N V All rights reserved Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earl
11. all models can be configured in high definition HD mode For information about your set see the specification When you connect an HD device to your TV configure the display format of your TV You might also have to configure the display format of your HD device For information about configuring your device see the documentation of the device Configure your TV in HD mode 1 Connect your HD device to the TV Refer o the Quick Start Press SOURCE and select HDMI or YPBPR then press OK Press MENU BACK and select Features gt Mode Selection 2 3 4 Press OK 5 Press lt 4 or gt to select a mode PHILIPS Picture Install Format Widescreen Timer Back Light Geometry Mode Selection 6 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit 24 EN Note e Certain picture and sound features are not available in HDMI and YCbCr modes Supported screen resolutions The following screen resolutions are supported in HDMI and YPbPr modes Resolution Refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz If necessary adjust the picture position to the center of the screen with the cursor buttons Adjust display settings in HD mode Adjust your TV display settings in HD mode 1 Press MENU BACK and select Features gt Geometry
12. e previous menu or press STATUS EXIT to exit Check timer status Check the status of the timers that you set for current time sleep timer and TV timer 1 Press TIMER on the remote control L gt The TV timer status is displayed Sleep Current Time Activate Start Time Stop Time Source Channel No You can change the timer settings from this screen 2 Press TIMER again to exit the timer display Create and use lists of favorite channels This section describes how to set up a list of your preferred TV channels EN 17 Create and use your favorite list 1 Press MENU BACK and select Install gt Fav Channel Press OK 2 3 Press A or to highlight the favorite channel number 4 Use the number keys to key in the channel number Ls The channel number is displayed beside the favorite list number Enter up to six favorite channels in the list PHILIPS Picture Features FAV 1 FAV 2 FAV 3 FAV 4 FAV 5 FAV 6 5 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit 6 Press SURF repeatedly to cycle through the favorite channels View closed captions subtitles The caption service displays transmitted closed caption text The captioned text can be displayed permanently or only when the TV is muted 18 EN e This television provides a display of television closed captioning that conforms with the EIA 608 standard and in accordance wi
13. eight of the TV Improper wall mounting can result in severe injury or damage Do not attempt to wall mount he TV yourself f the TV is mounted on a swivel base or swivel arm ensure no strain is placed on he power cord when the TV is swivelled Strain on the power cord can loosen connections and cause arcing or fire Disconnect the TV from the mains and antenna before lightning storms During ightning storms do not touch any part of he TV mains cord or antenna cable Be sure that you have full access to the mains cord for easy disconnection of the TV from the mains When disconnecting the TV from the mains be sure to urn off the TV then the mains power if available Unplug the mains cord from the mains socket outlet Unplug the mains cord from the power connector at the back of the TV Always pull the mains cord by the plug Do not pull the mains cord Permanent hearing loss can occur if you use earphones or headphones at high volumes Though high volume may sound EN 5 English normal over time it can damage your hearing To protect your hearing limit the amount of time you use earphones or headphones at high volume Screen care Turn off and unplug the mains cord before cleaning the screen Clean the screen with a soft dry cloth Do not use substances such as household cleaning agents as these may damage the screen b4 4 bo To avoid deformations or colour fading wipe o
14. erence such as cars daylight lamps and hair driers Adjust the antenna to minimize the interference Blank screen in VGA PC mode Perhaps the TV can not recognize the resolution set by the PC Change to the best resolution or other standard resolutions of the PC system 28 EN Check the connections Set the PC refresh rate to 60Hz Snowy dots and interference If the antenna is located in the fringe area of a television signal where the signal is weak the picture may appear snowy When the signal is weak it may be necessary to install a special antenna to improve the reception e Adjust the position and orientation of the indoor outdoor antenna Check the connection of antenna e Fine tune the program e Try another program Broadcasting failure may happen Ghost Ghosting occurs when the television signal follows two paths One is the direct path the other is reflected from tall buildings hills or other objects Changing the direction or position of the antenna may improve the reception Radio frequency interference This interference produces moving ripples or diagonal streaks and in some case loss of contrast in the picture Find out and remove the radio interference source 11 Product information Note e Product information is subject to change without prior notice Supported display resolutions Computer formats see Supported screen resolutions on page 23 e Video for
15. ff water droplets as soon as possible Do not touch push rub or strike the screen with hard objects as this may damage the screen permanently Where possible avoid stationary images that remain on screen for extended periods of time Examples include screen menus teletext pages black bars or stock market tickers If you must use stationary images reduce the screen contrast and brightness to avoid screen damage Environmental care Recycling your packaging The packaging of this product is intended to be recycled Contact your local authorities for information on how to recycle the packaging Disposing your used product Your product is manufactured with high quality materials and components that can be recycled 6 EN and reused When you see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC Do not dispose your used product with household waste Ask your dealer for information on how to safely dispose of the product Uncontrolled waste disposal harms both the environment and human health Disposing used batteries The supplied batteries do not contain mercury or cadmium Dispose supplied and all other used batteries according to your local regulations Power consumption The TV consumes minimal energy in standby mode to minimize environmental impact Active power consumption is displayed at the back of the TV For more
16. g Safety e Two people are required to lift and carry a TV that weighs more than 25 kilos 551b Improper handling of the TV can result in serious injury e If transporting the TV in low temperatures less than 5 C open the box and wait until the TV matches the ambient temperature of the room before unpacking e To avoid short circuit do not expose the TV remote control or remote control batteries to rain or water e To avoid risk of fire or electric shock do not place the TV remote control or remote control batteries near naked flame sources e g lighted candles and other heat sources including direct sunlight Do not place vessels filled with water on op of or near to the TV Spilling water into he TV can result in electric shock If you spill water into the TV do not operate the TV Immediately disconnect the TV from he power and have the TV checked by a qualified technician Do not install the TV in a confined space such as a bookcase Leave a space of at least 10cm four inches around the TV for ventilation Be sure air flow is not obstructed lf placing the TV on a flat solid surface be sure to use only the supplied stand Do not move the TV if the stand is not properly screwed to the TV Wall mounting of the TV should only be performed by qualified personnel The TV must only be mounted on an appropriate wall bracket and on a wall that can safely hold the w
17. gt Back Light Press 4 or to adjust the level EN 15 English PHILIPS Picture Install Format Widescreen Timer gt Closed Caption gt Parental Control gt Back Light ee Contrast 3 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Use Contrast Optimizes the contrast settings for overall picture quality 1 Press MENU BACK and select Features gt Contrast 2 Press 4 or gt to turn on Contrast B PHILIPS Picture Install Format Widescreen Timer Closed Caption Parental Control Back Light Contrast 3 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Use timers This section describes how to set the clock and switch the TV on or off at a specified time 16 EN Automatically switch the TV to standby Sleeptimer Sleeptimer switches the TV to standby after a delay You can always switch off your TV earlier or reset the sleeptimer during the countdown 1 Toggle SLEEP on the remote control to cycle through the sleep timer settings off 15 30 45 60 90 120 180 and 240 minutes Tip e Press SLEEP once to view the remaining time before the TV switches to standby Press SLEEP repeatedly to change the setting or to turn off sleep timer Set the clock 1 Press MENU BACK and select Features gt Timer 2 Press OK 3 Press v to highlight Current Time and press l
18. guage more of the following intense S Sex violence intense sexual situations V suggestive dialog and strong Violence language TV MA Programs are designed to L be viewed by adults and may be Language unsuitable for children under the S Sex age of 17 These programs may V contain graphical violence explicit Violence sexual activity and or crude or indecent language Use movie ratings lock This section describes how to control viewing of movies based on their Motion Picture Association of America MPAA rating 20 EN WN D Access the Parental Control menu Press V and select Movie Rating Press OK Press to highlight a rating and press lt 4 or P to change the setting to View or Block PHILIPS Picture Install N R G PG PG 13 R NC 17 X When you block a movie rating all items for ages below that movie rating are automatically blocked Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Summary of US movie ratings Rating Description All All items in the ratings list are locked F NR Not rated G Movies with a mild content suitable for all ages PG Movies for which parental guidance is recommended They may contain a few racy or violent scenes or maybe some bad anguage PG 13 ovies for which parenta guidance may be recommended if under age 13 R Restricted The mov
19. ier supplies accordingly The material in this manual is believed adequate for the intended use of the system f the product or its individual modules or procedures are used for purposes other than hose specified herein confirmation of their validity and suitability must be obtained Philips warrants that the material itself does not infringe any United States patents No further warranty is expressed or implied Warranty o components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Philips Service Centres and official repair shops Failure o do so shall void any warranty stated or implied Any operation expressly prohibited in his manual any adjustments or assembly procedures not recommended or authorised in his manual shall void the warranty Pixel characteristics This LCD product has a high number of colour pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Compliance with EMF Koninklijke Philips Electronics N V manufactures and sells many products targeted at consumers which like any electronic apparatus in general have the ability to emit and receive electromagnetic signals 4 EN One of Philips leading Business
20. ies usually contain offensive sex or bad anguage and may be unsuitable for children under the age of 17 Parental guidance or permission needed NC 17 Even with parental permission forbidden under age 17 More offensive sex violence or bad anguage x ovies which generally focus on sex violence and or bad language Also known as pornography Block unrated or no rating programs Block unrated programs such as director s cut edition or programs with no advisory data Access the Parental Control menu Press to highlight Unrated Block or No Rating Block Press OK Press lt or P to select On Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Ui BK WW N EN 21 Unlock blocked channels or programs To view programs or channels blocked with the parental control blocking options unlock them with the password or turn off parental control Turn off parental control 1 Access the Parental Control menu 2 Press to highlight Parental Control and press or P to turn off Parental Control PHILIPS Picture Sound Install Change Password gt Parental Control Off gt TV Rating Movie Rating gt 3 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit 22 EN 7 Use your TV as a PC monitor For information about how to connect a PC to he TV see the Quick Start aa Caution e Before you connect yo
21. mats see Supported screen resolutions on page 24 Tuner Reception Transmission e Antenna input 75ohm coaxial IEC75 e TV system e Video playback NTSC PAL Sound Sound system e Mono Stereo SAP e Power output e 2x 3W 19PFL3403 e 2x 5W 26PFL3403 Remote control e Type PFOSLO8B e Batteries 2 x AAA size LRO3 type Connections Rear AV 1 Composite video CVBS in Audio L R in YPBPR Component video CVI in Audio L R in PC VGA in VGA Audio in HDMI 1x TV TV ANTENNA English Connections Side Headphone out stereo mini jack AV1 Composite video CVBS in AUDIO L R in SVIDEO 1x S Video in Power Mains power AC 100 240V 10 Power power consumption 50 W 19PFL3403 80 W 26PFL3403 Standby power consumption lt 0 3 W Specifications are subject to change without notice For detailed specifications of this product go to www philips com support Weight TV weight 4 2 kg 19PFL3403 7 7 kg 26PFL3403 TV weight with stand 4 9 kg 19PFL3403 9 1 kg 26PFL3403 Dimensions TV dimensions e Height 35 3 cm 19PFL3403 45 8 cm 26PFL3403 EN 29 TV dimensions with stand Width 47 3 cm 19PFL3403 67 1 cm 26PFL3403 Depth 6 9 cm 19PFL3403 9 0 cm 26PFL3403 Height 39 4 cm 19PFL3403 50 3 cm 26PFL3403 Width 47 3 cm 19PFL3403 67 1 cm 26PFL3403 Depth 16 0 cm 19PFL3403 21 5 cm 26PFL3403
22. ntrol or CHANNEL on the side of the TV Excluded channels can be accessed however by pressing the number keys on the remote control It can be useful to exclude channels with weak signals 1 Press MENU BACK and select Install gt List Press OK Press lt or gt to select a channel number AWN Press to highlight In List and press lt or gt to select Off EN 27 10 Troubleshooting This section describes commonly encountered issues and accompanying solutions Some problems you encounter with your TV can be corrected by consulting the following list No picture no sound 1 Check if the fuse or circuit breaker works 2 Plug another electrical device into the outlet to make sure it works or is turned on 3 Power plug is in a bad contact with the outlet 4 Check the signal source No color 1 Change the color system 2 Adjust the saturation 3 Try another program Black white program may be received Remote control does not work 1 Change the batteries 2 Batteries are not installed correctly 3 ain power is not connected No picture normal sound 1 Adjust the brightness and contrast 2 Broadcasting failure may happen Normal picture no sound 1 Press the VOLUME button to increase volume 2 Volume is set to mute press MUTE to restore sound 3 Change the sound system 4 Broadcasting failure may happen Ripples on the picture Usually caused by local interf
23. o side to be used with Audio L R connectors for camcorder game console etc When you use the S Video side for video signals do not use the Composite video side input for video signals Headphones Headphone stereo mini jack For software update Remote control o ACTIVE Geno Fra Ge Ce 1 mg gn _ imer seer sure PHILIPS TELEVISION Power Switches the TV on from standby or back to standby The TV is not powered off completely unless it is physically unplugged SOURCE Selects connected devices EN OOOH 2 Not used SLEEP Sets a delay after which the TV switches to standby TIMER Sets the clock and timers SMART SOUND Selects pre defined sound settings AV lt gt Navigation keys Navigates through the menus MENU BACK Toggles the menu on or off or returns to a previous screen VOL Increases or decreases volume x Mute Mutes or unmutes audio Number buttons Selects a channel page or setting STATUS EXIT Displays status information or exits the menu SAP Selects Secondary Audio Program SAP stereo or mono CC Displays closed captions settings SURF Displays a list of all channels marked as favorite TV PC Toggles between PC mode and the last accessed mode SMART PIC Selects pre defined picture settings OK Activates a selection
24. o increase or decrease volume e Press VOL on the remote control or press VOLUME on the side of the TV To mute or unmute sound e Press K on the remote control to mute he sound e Press K again to restore the sound To adjust headphone volume e Press VOL on the remote control or press VOLUME on the side of the TV When headphones are plugged into the TV he loud speakers are automatically muted EN 13 English 6 Use more of your TV Adjust picture and sound settings This section describes how to adjust picture and sound settings Adjust picture settings 1 Press MENU BACK and select Picture 2 Press OK 3 Press A or to highlight Picture 4 Press lt 4 or gt to adjust the settings B PHILIPS Sound Features Install Smart Pic Personal Brightness Contrast Tint Color Sharpness Color Temp Noise Reduction 5 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit The following smart picture settings can be configured Depending on the format of the picture source some picture settings are not available e Brightness Adjusts the intensity and details of dark areas e Contrast Adjusts the intensity of bright areas keeping dark areas unchanged e Tint Adjusts the color balance in an image e Color Adjusts color saturation e Sharpness Adjusts the level of sharpness in image details 14 EN
25. or immovable object that you can attach the cable to 10 EN Wall mount the TV PN Warning e Wall mounting of the TV should only be performed by qualified installers Koninklijke Philips Electronics N V bears no responsibility for improper mounting that results in accident or injury Screen VESA compatible Bolt type and size bracket mm min length not supplied 19 Adjustable 100 x M4 x 10mm 48cm 100 26 Adjustable 200 x M4 x 10mm 66cm 100 The minimum bolt length is 10mm If you use a spacer the bolt length should be the spacer length plus 10mm For example if you use a 40mm spacer the bolt length should be 50mm 40mm 10mm Connect the antenna cable Connect the antenna cable to the TV antenna socket 75 Q at the back of the TV Cable To connect the power cord PN Warning e Verify that your mains voltage corresponds with the voltage printed at the back of the TV Do not insert the mains cord if the voltage is different 1 Locate the power connector at the back of he TV The location of the power connector varies according to TV model N nsert the power cord fully into the power connector LJ Connect the power cord plug to the power outlet Ensure that the cord is tightly secured at both ends
26. or accesses the menu ED FORMAT Selects a picture format 0 CH Switches to the next or previous channel GD A CH Toggles between the current channel and the last viewed channel EN English 4 Get started This section supplements information in the Quick Start For information about how to mount and install your TV refer to the Quick Start Position the TV PN Warning Do not insert the power plug into the wall socket before all the connections are made e Large screen TVs are heavy Two people are required to carry and handle a large screen TV e Before you move the TV disconnect the cables to prevent breakage n addition to reading and understanding the safety instructions see Safety on page 5 consider the following before positioning your TV e Ensure that you always have easy access to he power cord or plug to disconnect the TV from the power f the TV is mounted on a swivel base ensure that no strain is placed on the power cord when the TV is swiveled Strain on the power cord can loosen connections e The ideal viewing distance for watching TV is three times its screen size e Position the TV where light does not fall on the screen Connect your devices before you position the TV Use a Kensington lock There is a Kensington security slot at the back of the TV If you connect a Kensington lock not supplied position the TV near a heavy
27. product specifications see the product leaflet at www philips com support 3 Your TV Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your product at www philips com welcome TV overview This section gives you an overview of commonly used TV controls and functions Side controls and indicators O Standby indicator remote control sensor Q POWER Switches the TV on from standby or back to standby The TV is not powered off completely unless it is physically unplugged CHANNEL Switches to the next or previous channel MENU Toggles the main menu on or off OO VOLUME Increases or decreases volume Connectors ti English O HDMI HDMI for DVD player HD digital receiver HD game console PC etc VGA AUDIO Mini jack connector for PC audio when connecting a PC via DVI HDMI or VGA VGA PC To connect a PC YPBPR Component video input with YPbPr and Audio L R connectors for DVD digital receiver or game console etc AV1 Composite video input to be used with Audio L R connectors for camcorder game console etc TV 75 Q Antenna input SERV C For software update SIDE AV Composite video side to be used with Audio L R connectors for camcorder game console etc S VIDEO EN 7 S Vide
28. t or P to select the hours or minutes 4 Press A or to adjust the hours or minutes PHILIPS Picture Install Sleep Current Time Activate Start Time Stop Time Source Channel No 5 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Activate the timer 1 Press MENU BACK and select Features gt Timer 2 Press OK 3 Press v and select Activate gt On PHILIPS Picture Sound Install Sleep Current Time Activate Start Time Stop Time Source Channel No Set the TV timer Press MENU BACK and select Features gt Timer Press OK Press to highlight Start Time Press gt to select the hour field then press A or Y to adjust the hours Press B to select the minute field then press A or Y to adjust the minutes Press to highlight Stop Time Press P to select the hour field then press A or Y to adjust the hours Press B to select the minute field then press A or to adjust the minutes Press to highlight Source Press lt or gt to select the source ZAO OO OND Ww AWN AO f you select the TV source set the channel for the TV to switch to from standby Press Y to highlight Channel No then press or gt to select the number D PHILIPS Picture Sound Install English Sleep Current Time Activate Start Time Stop Time Source Channel No 12 Press MENU BACK to return to th
29. th Sections 15 119 of the FCCrules e If you connect your set top box via HDMI or component video input you cannot select closed caption through the TV You can select closed caption through the set top box only e The captions do not always use correct spelling and grammar e Not all TV programs and product commercials include closed caption information Refer to your area TV program listings for the TV channels and times of closed caption shows The captioned programs are usually noted in the TV listings with service marks such as CC Turn on Closed Caption 1 Press MENU BACK and select Features gt Closed Caption 2 Press OK 3 Press lt or gt to turn on CC Setting PHILIPS Picture Sound Install CC Setting CC Mode 4 Press v to highlight CC Mode and press lt or gt to select a setting 5 Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Summary of caption services Service Description CC 1 and Dialog and descriptions for the CC 2 action on the captioned TV program show on screen Usually CC1 is the most used CC 2 can be used for alternate languages if they are transmitted Use child control and rating locks This section describes how to lock or unlock the TV You can set a PIN code or use ratings to prevent children from watching certain programs or channels Change your password Follow these steps to set your PIN or to
30. ur PC set the PC monitor refresh rate to 60Hz Configure your TV in PC mode 1 Press SOURCE and select PC then press OK Tip e Toggle TV PC to switch to PC and the last accessed mode Note e Certain picture and sound features are not available in PC mode Supported screen resolutions The following screen resolutions are supported in PC mode Resolution Refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 768 60Hz 1280 x 1024 60Hz If necessary adjust the picture position to the center of the screen with the cursor buttons Adjust display settings for PC mode Adjust your TV display settings in PC mode 1 Press MENU BACK and select Features gt Geometry 2 Press OK D PHILIPS Picture Sound Install Auto Adjust Horizontal Shift Vertical Shift Clock Phase Press A or to select an item Press lt 4 or P to adjust the setting Press MENU BACK to return to the previous menu or press STATUS EXIT to exit Ui A W You can configure the following display settings for PC mode e Auto Adjust Synchronizes the phase and clock on the TV and PC e Horizontal Shift and Vertical Shift Adjusts the horizontal and vertical position of the picture e Clock and Phase Fine tunes the TV to match the display settings of the PC EN 23 English 8 Use your TV in HDTV mode Not
Download Pdf Manuals
Related Search