Home

Philips 107P Computer Monitor User Manual

Contents

1. MOVE SELECTION THEN lk 3 Press the highlighted 89 button The ADJUST SHAPE window appears ADJUST SIDE CURVE should be ADJUST SHAPE GB ADJUST SIDE CURVE ROTATE IMAGE BACK TO MAIN CONTROLS RIA MOVE SELECTION THEN 4 Press the GF button to highlight ADJUST SIDE ANGLES 5 Press the B button The SIDE ANGLES window appears TRAPEZOID should be highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 12 of 25 6 25 2003 10 10 06 AM The OSD Controls SIDE ANGLES 7 PARALLELOGRAM BACK TO ADJUST SHAPE 6 To adjust the trapezoid press the 4 button 7 When the trapezoid is adjusted press the GF button to highlight PARALLELOGRAM or press the B button to return to the ADJUST SHAPE window SIDE ANGLES TRAPEZOID Po Sc 5o K BACK TO ADJUST SHAPE 8 To adjust the parallelogram press the 4 or button 9 When the parallelogram is adjusted press the B button to return to the ADJUST SHAPE window BACK TO MAIN WINDOWS will be highlighted 10 Press the 89 button to return to the MAIN CONTROLS window or press the button until ROTATE IMAGE is highlighted file D EDFU crt 17 edoc english OSD osd cont htm 13 of 25 6 25 2003 10 10 06 AM The OSD Controls After returning to MAIN CONTROLS r lo continue to ROTATE IMAGE start with step 5 under ROTATE IMAGE and follow the directions Smart Help lo exit completely press the 69 button
2. ADJUST MOIRE Not available in all models EXTRA CONTROLS is a set of three features including ADJUST MOIRE Moire is a fringe pattern arising from the interference between two superimposed line patterns To adjust your moire follow the steps below Note Use only if necessary By activating ADJUST MOIRE sharpness can be affected 1 Press the 89 button on the monitor The MAIN CONTROLS window appears 2 Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 20 of 25 6 25 2003 10 10 06 AM The OSD Controls ES ys gt EU hm MAIN CONTROLS LANGUAGE eOOM ADJUST HORIZONTAL ADJUST VERTICAL ADJUST SHAPE ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS RIA MOVE SELECTION THEN 3 Press the 3 button The EXTRA CONTROLS window appears ADJUST MOIRE will be highlighted EXTRA CONTROLS ADJUST MOIR DEGAUSS LIGHTFRAME OFF ON BACK TO MAIN CONTROLS MOVE SELECTION THEN SERIAL NUMBER TY 123456 RESOLUTION 1024 768 1280 1024 FREQUENCY 69K 85HZ 64K 60HZ 4 Press the B button The ADJUST MOIRE window appears HORIZONTAL will be highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 21 of 25 6 25 2003 10 10 06 AM The OSD Controls ADJUST MOTRE VERTICAL BACK TO EXTRA CONTROLS 5 To adjust the horizontal moire press the 4 button 6 When the ho
3. D EDFU crt_17 edoc english FAQ HTM 6 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions The following models can be incorporated with the Multimedia Base 109B5 109E5 109F5 107B5 107E5 107F5 10755 107T5 27 What are Philips Multimedia Base s specifications See detailed Multimedia Base specifications on the product information page 28 Why is a Multimedia Base better than separate speakers The major advantage of the Multimedia Base is its minimal space requirements In fact it hardly uses any extra space at all monitor depth and width are unchanged Only the monitor s height is increased by only 3 centimeters 29 Where can I buy a multimedia base to incorporate with my Philips monitor Please contact your dealer reseller for details 30 What does Auto Calibrate do It makes your monitor perform better and last longer As a monitor becomes older brightness gradually deteriorates and its colors change This well known process effects all monitors Eventually after a number of years the monitor s brightness deteriorates to below 50 of its original value At this stage the usable life of a monitor is considered ended Auto Calibrate regularly readjusts color temperature and luminance to their original values 31 How does Philips Auto Calibrate feature benefit me With Auto Calibrate it takes a monitor s luminance 33 percent longer to deteriorate to the 50 percent level that marks the end of a display devic
4. Horizontal scanning 30 97 KHz Vertical scanning 50 160 Hz VIDEO Video dot rate 203 MHz Input impedance Video 75 ohm Sync 2 2 kOhm Input signal levels 0 7 Vpp Sync input signal Separate sync Sync polarities Positive and negative WHITE COLOR TEMPERATURE Chromaticity CIE coordinates at 9300 degrees K x 0 283 y 0 297 e at 6500 degrees X 0 313 y 0 329 e at 5500 degrees x 0 332 y 0 347 sRGB sRGB is a standard for ensuring correct exchange of colors between different devices e g digital cameras monitors printers scanners etc Using a standard unified color space sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors In that way the colors are calibrated and you can rely on the correctness of the colors shown on your screen Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined setting as well as the color gamut Therefore it is important to select the sRGB setting in the monitor s OSD To do so open the OSD by pressing the OK button on the front of your monitor Use the down button to go to Color temperature and press OK again Then move the down button to go to SRGB and press OK again Exit this OSD After this please don t change the brightness or contrast setting of your monitor If you change either of these the monitor will exit the sRGB mode and go
5. a multi state non profit organization focused on promoting recycling market development plans to implement a recycling program In Asia Pacific Taiwan the products can be taken back by Environment Protection Administration EPA to follow the IT product recycling management process detail can be found in web site www epa gov tw For help and service please contact Consumers Information Center or F1rst Choice Contact Information Center in each country or the following team of Environmental specialist can help Mr Job Chiu Environment manager Philips Electronics Industries Taiwan Ltd Monitor Business Unit E mail job chiu philips com Tel 886 0 3 454 9839 Mr Maarten ten Houten Senior Environmental Consultant Philips Consumer Electronics E mail marten ten houten philips com Tel 31 0 40 27 33402 Ms Patricia A Franco Philips Electronics North America E mail patricia franco Philips com Tel 1 202 962 8550 RETURN TO TOP OF THE PAGE CE Declaration of Conformity e Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards EN60950 1992 A1 A2 A3 A4 A11 Safety requirement of Information Technology Equipment EN55022 1998 Radio Disturbance requirement of Information Technology Equipment EN55024 1998 Immunity requirement of Information Technology Equipment EN61000 3 2 1995 Limits for Harmonic Current Emission EN61000
6. en fermant l quipement puis en le remettant en fonction l utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes e R orienter ou d placer l antenne de r ception e Augmenter la distance entre l quipement et le r cepteur e Brancher l quipement sur un autre circuit que celui utilis par le r cepteur e Demander l aide du marchand ou d un technicien chevronn en radio t l vision Toutes modifications n ayant pas recu l approbation des services comp tents en mati re de conformit est susceptible d interdire l utilisateur l usage du pr sent quipement N utiliser que des c bles RF arm s pour les connections avec des ordinateurs ou p riph riques file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 7 of 13 6 25 2003 10 09 45 AM Regulatory Information CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA RETURN TO TOP OF THE PAGE EN 55022 Compliance Czech Republic Only This device belongs to category B devices as described in EN 55022 unless it ia epecili cally stated that it ia a Class A device on tha specification label The following applias to devices in Class A EM 55022 radius of protection up to 30 meters Tha user of tha device is obliged to take all stapa necessary to remove sources of intarfarence to tela communication ar other devices Pokud neni na typovem p
7. 20 00 hrs Central European Time CET and on Saturdays and Sundays from 10 00 to 18 00 hrs CET by using one of the toll free numbers Click here to access the F1rst Choice Contact Information Or you can reach us via Website http www philips com file D EDFU crt_17 edoc english WARRANTY WAR_USA HTM 3 of 3 6 25 2003 10 10 11 AM F1rst Choice Contact Information First Choice Contact Information Telephone numbers Austria 01 546 575 603 Belgium 02 275 0701 Cyprus 800 92256 Denmark 35 25 87 61 France 03 8717 0033 Germany 0696 698 4712 Greece 00800 3122 1223 Finland 09 2290 1908 Ireland 01 601 1161 Italy 02 48 27 11 53 Luxembourg 408 443 5501 The Netherlands 053 482 9800 Norway 22 70 82 50 Portugal 0800 831 363 Sweden 08 632 0016 Switzerland 02 23 10 21 16 Spain 09 17 45 62 46 United Kingdom 0207 949 0069 U S A 877 835 1838 Calls charged at local rates file D EDFU crt_17 edoc english WARRANTY WARFIRST HTM 6 25 2003 10 10 19 AM Consumer Information Centers Consumer Information Centers Antilles Argentina Australia Bangladesh Brasil Canada Chile China Colombia Czech Republic Dubai Egypt Hong Kong Hungary India Indonesia Japan Korea Malaysia Mexico Morocco New Zealand Pakistan Paraguay Peru Philippines Poland Russia Singapore South Africa Taiwan Thailand Turkey Uruguay Venezuela Eastern Europe CZECH REPUBLI
8. 6 25 2003 10 03 58 AM Glossary horizontal pitch Dot rate Frequency in MHz of the dot clock It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry Also known as video dot rate RETURN TO TOP OF THE PAGE E Electromagnetic radiation standards International standards set to limit electromagnetic emissions from monitors There are currently two important standards both derived from regulations originally laid down by Swedish authorities MPR II The standard originally proposed by the Swedish National Board of Measurement and Testing It set maximum levels of electromagnetic radiation emitted by monitors and has now been adopted as a world standard MPR II defines maximum permitted electrostatic magnetic and electric field levels measured at a distance of 50 cm from the center of the monitor see table TCO file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 5 of 18 6 25 2003 10 03 58 AM Glossary In 1991 the Swedish Tjanstemannens Central Organization TCO Swedish confederation of Professional Employees set a standard even more severe than MPR II especially for alternating electric fields AEF The TCO standard is more severe since not only are the permitted field levels reduced compared with MPR II but the measuring distance is also reduced see table Electromagnetic radiation standards EMI Electrical Magnetic I
9. SHANHAI No 1102 wuding road jing an district 200040 Shanghai P R China Phone 800 820 5128 Toll Free Fax 21 65610647 NANJING No 12 2 dong da ying bei zhu jiang road 210018 Nanjing P R China Phone 800 820 5128 Toll Free Fax 21 65610647 HANGZHOU No 20 jiao gong road 310012 Hangzhou P R China Phone 800 820 5128 Toll Free Fax 21 65610647 BEIJING No 171 3 hai dian road hai dian district 100086 Beijing P R China Phone 800 820 5128 Toll Free Fax 21 65610647 SHENYANG No 84 1 san hao street file D EDFU crt_17 edoc english WARRANTY warcic htm 4 of 9 6 25 2003 10 10 26 AM Consumer Information Centers 110003 Shenyang P R China Phone 800 820 5128 Toll Free Fax 21 65610647 XIAN No 6 9 yan ta road south part 710061 Xian P R China Phone 800 820 5128 Toll Free Fax 21 65610647 GUANGZHOU No 15 17 long kou dong road tian he district 510070 Guangzhou P R China Phone 800 820 5128 Toll Free Fax 21 65610647 SHENZHEN Room 603 electronic BLD No 30 Shen nan zhong road 518031 Shenzhen P R China Phone 800 820 5128 Toll Free Fax 21 65610647 CHANGSHA Room 18 He yi computer city chao yang road Changsha P R China Phone 800 820 5128 Toll Free Fax 21 65610647 WUHAN No 60 66 gui yuan road hong shan district 430070 Wuhan P R China Phone 800 820 5128 Toll Free Fax 21 65610647 CHENGDU Chengdu Sience technolege
10. TEN DAYS TO ENSURE YOUR Warranty Verification v Owner Confirmation v Model Registration See Inside For Valuable Benefits
11. like driver software and bus bandwidth required by peripherals USB makes necessary resources available without user intervention e USB eliminates case angst the fear of removing the computer case to install add on peripherals And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals e USB does away with port gridlock Without USB PCs are normally limited to one printer two Com port devices usually a mouse and modem one Enhanced Parallel Port add on scanner or video camera for example and a joystick More and more peripherals for multimedia computers arrive on the market every day With USB up to 127 devices can run simultaneously on a computer e USB permits hot plug in There s no need to shut down plug in reboot and run set up to install peripherals And no need to go through the reverse process to unplug a device In short USB transforms today s Plug and Pray into true Plug and Play Hub A Universal Serial Bus device that provides additional connections to the Universal Serial Bus Hubs are a key element in the plug and play architecture of USB The Figure shows a typical hub Hubs serve to simplify USB connectivity from the user s perspective and provide robustness at low cost and complexity Hubs are wiring concentrators and enable the multiple attachment characteristics of USB Attachment points are referred to as ports Each hub converts a single attachment point into multiple
12. 107C pdf FOF 8 m 107E pdf FOF 8 pa 107G pdf FOF 8 m 107F pdf FOF 8 Bs 107P pdf FOF 8 107S pdf FOF 8 pA 107T pdf file D EDFU crt_17 edoc english DOWNLOAD DOWNLOAD HTM 1 of 2 6 25 2003 10 03 58 AM Download and Print js 107X pdf file D EDFU crt_17 edoc english DOWNLOAD DOWNLOAD HTM 2 of 2 6 25 2003 10 03 58 AM Troubleshooting Troubleshooting Safety Precautions and Maintenance Troubleshooting Regulatory Information Other Related Information Common Problems Having trouble Something not working Before calling for help try these suggestions Having this problem No Picture Power LED not lit The screen says NO SIGNAL INPUT FROM INPUT A or B The screen says NO SIGNAL INPUT The screen says FREQUENCY IS OUT OF RANGE No Picture Power LED is amber or yellow No Picture Power LED is green Check these items Make sure the Power cable is plugged into the power outlet and back of the monitor Power button on the front of your monitor should be in the ON position Disconnect the monitor from the power outlet for about one minute then re connect the power outlet again Make sure the computer is turned on Make sure the monitor cable is properly connected to your computer Press OK and UP knobs on front control panel simultaneous to switch the Input Signal A B e Check to see if the monitor cable has bent pins e Make sure the
13. 3 3 1995 Limitation of Voltage Fluctuation and Flicker following provisions of directives applicable 73 23 EEC Low Voltage Directive 89 336 EEC EMC Directive 93 68 EEC Amendment of EMC and Low Voltage Directive and is produced by a manufacturing organization on 1509000 level e The product also comply with the following standards 1509241 3 1509241 7 1809241 8 Ergonomic requirement for Visual Display 15013406 2 Ergonomic requirement for Flat panels GS EK1 2000 GS specification prEN50279 1998 Low Frequency Electric and Magnetic fields for Visual Display MPR II MPR 1990 8 1990 10 Low Frequency Electric and Magnetic fields TCO95 TCO99 TCOOS Requirement for Environment Labelling of Ergonomics Energy Ecology and Emission TCO Swedish Confederation of Professional Employees for TCO versions file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 5 of 13 6 25 2003 10 09 45 AM Regulatory Information RETURN TO TOP OF THE PAGE Energy Star Declaration PHILIPS 107P4 This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling DPMS standard This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299 94 Time settings are adjusted from the system unit by software NUTEK VESA State LED Indicator Power Consumption Normal operation ON Green Typical
14. 77W Power Saving Alternative2 OFF Yellow 2W One Step As an ENERGY STAR Partner PHILIPS has determined that this product meets the ENERGY STAR guidelines for energy efficiency A We recommend you switch off the monitor when it is not in use for quite a long time RETURN TO TOP OF THE PAGE Federal Communications Commission FCC Notice U S Only This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 6 of 13 6 25 2003 10 09 45 AM Regulatory Information encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that
15. GLOSSARY GLOSSARY HTM 2 of 18 6 25 2003 10 03 58 AM Glossary Points where convergence error is specified Convergence error correction A method of correcting for convergence error to insure that all three beams land simultaneously in the same triad This is usually accomplished by means of special convergence error correction coils in the deflection yoke CHT Cathode ray tube the general term for all tubes in which one or more electron beams emitted by a cathode are periodically scanned across a phosphor screen by means of deflection circuitry A special form of the cathode ray tube is the TV and monitor picture tube deflection cails electron 1 electron beam _ Phosphor screen cathode shadow mask i evacuated glass tube CustoMax Philips proprietary monitor control software that allows users to control parameters e g Size Color Geometry using software running in Windows CustoMax is compatible with existing VGA cards See CrystalClear FAQ and USB Bay FAQ RETURN TO TOP OF THE PAGE D DDC Display Data Channel DDC is a communication channel for displays and computers The DDC feature allows the monitor file D EDFU crt_17 edoc english GLOSSARY GLOSSARY HTM 3 of 18 6 25 2003 10 03 58 AM Glossary controller to be automatically configured to make optimal use of the display without manual user interaction DDC is implemented as part of the new Plug amp Play
16. Glossary Also called line frequency and expressed in kHz it is the number of video lines written on the screen every second from left to right The higher the horizontal scanning frequency the better the resolution i e the higher the resolution and or the higher the refresh rate RETURN TO TOP OF THE PAGE INF File INF file Information File Information INF files store information in a specific format The set up functions retrieve information from the INF file to use when performing installation operations Examples of the type of information stored in an INF file include INI and registry changes file names and locations of the source files on source media Interlaced non interlaced Interlaced The method of writing a picture on the screen by initially writing all even lines and subsequently writing all odd lines of the picture Result The complete picture is composed of two interlaced half pictures or fields With interlacing a vertical or field frequency of 50 Hz means a picture or frame frequency of 25 Hz Non interlaced The method of writing a picture on the screen by successive video lines of the picture so that a full frame is written onto the screen in one vertical sweep of the beams With a non interlaced display a vertical frequency of 50 Hz means a picture or frame frequency of 50 Hz At any given resolution non interlaced modes are preferable to interlaced modes however generation of non interlaced
17. Glossary SEP HR pincushion distortion WE E trapezoid distortion ES parallelogram distortion balanced pincushion distortion SOG Synchronization On Green A properly functioning color monitor requires five kinds of signals horizontal sync pulse vertical sync pulse red color signal green color signal and blue color signal Signals from a PC are transmitted to a monitor using one of three methods 1 Separate sync Horizontal and Vertical sync signals transmitted separately 2 Composite sync Horizontal and vertical sync pulses mixed into a single signal train 3 SOG Horizontal and vertical sync pulses mixed then combined with the green color signal RETURN TO TOP OF THE PAGE T TCO See Electromagnetic radiation standards Tilt function file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 14 of 18 6 25 2003 10 03 58 AM Glossary See rotation function Trapezoid distortion See Geometrical distortion TTL signal A TTL Transistor transistor logic signal is a digital signal level for controlling the screen colors With TTL driving the red green and blue signals can only be switched on or off or provided with an intensity signal A TTL driven monitor can thus display a maximum of 64 colors Video standards such as MDA CGA and EGA are based on TTL level RETURN TO TOP OF THE PAGE U USB or Universal Serial Bus A smart plug for PC peripherals USB automatically determines resources
18. Ireland Italy Liechtenstein Luxembourg Monaco the Netherlands Norway Portugal Sweden Switzerland Spain and the United Kingdom and only for monitors originally designed manufactured approved and or authorized for usage within these countries Warranty coverage begins as from the day you buy your monitor For three years thereafter your monitor will be swapped by at least an equivalent monitor in case of defects provided for under the warranty coverage The swap monitor remains yours and Philips keeps the defective original monitor For the swap monitor the warranty period remains equal to that of your original monitor being 36 months as from the purchase date of your original monitor What is excluded The Philips F1rst Choice Warranty applies provided the product is handled properly for its intended use in accordance with its operating instructions and upon presentation of the original invoice or cash receipt indicating the date of purchase dealer s name and model and production number of the product The Philips F1rst Choice Warranty may not apply if e The documents have been altered in any way or made illegible e The model or production number on the product has been altered deleted removed or made illegible Repairs or product modifications and alterations have been executed by unauthorized service organizations or persons Damage is caused by accidents including but not limited to lightning water or fire misuse or negle
19. Use this feature if your image does not appear centered ADJUST SIZE under ADJUST VERTICAL expands or controls the image on your screen pushing it out toward the top or bottom or pulling it in toward the center 1 Press the 69 button the monitor The MAIN CONTROLS window appears 2 Press the button until ADJUST VERTICAL is highlighted MAIN CONTROLS LANGUAGE 200M ADJUST HORIZONTAL ADJUST SHAPE ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS MOVE SELECTION THEN hl 3 Press the 89 button The ADJUST VERTICAL window appears POSITION should be highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 7 of 25 6 25 2008 10 10 05 AM The OSD Controls ADJUST VERTICAL _ 8 so GC SIZE E _ 77 so BACK TO MAIN CONTROLS 4 Press the A or K button to move the image up or down 5 When the position is adjusted press the 89 button to return to MAIN CONTROLS window or press the to highlight SIZE ADJUST VERTICAL 5 POSITION X BACK TO MAIN CONTROLS 6 To adjust the vertical size press the 4 or K button 7 When the size is adjusted press the 89 button to return to MAIN CONTROLS window CLOSE MAIN CONTROLS will be highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 8 of 25 6 25 2008 10 10 05 AM The OSD Controls After returning to MAIN CONTROLS A Smart fo Continue to ADJUST SHAPE
20. adjusting the settings on your monitor Customer Care and Warranty is a list of worldwide Philips consumer information centers along with the help desk phone numbers and information on the applicable warranty of your product e Glossary provides more information for technical terms e Download allows users to install the entire manual on their hard drive e Frequently Asked Questions provides answers to commonly asked questions RETURN TO TOP OF THE PAGE Other Documents You May Need In addition to this Electronic User s Guide you may need to refer to the following documentation e Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor This is included with this product RETURN TO TOP OF THE PAGE Notational Descriptions The following subsections describe notational conventions used in this document file D EDFU crt_17 edoc english 107P ABOUT ABOUT HTM 1 of 2 6 25 2003 10 03 55 AM About This Electronic User s Manual Notes Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold type or in italic type These blocks are notes cautions and warnings and they are used as follows NOTE This icon indicates important information and tips that help you make better use of your computer system CAUTION This icon indicates information that tells you how to avoid either potential damage to hardware or loss o
21. attachment points The architecture supports concatenation of multiple hubs The upstream port of a hub connects the hub towards the host Each of the other downstream ports of a hub allows connection to another hub or function Hubs can detect attach and detach at each downstream port and enable the distribution of power to downstream devices Each downstream port can be individually enabled and configured at either full or low speed The hub isolates low speed ports from full speed file D EDFU crt_17 edoc english GLOSSARY GLOSSARY HTM 15 of 18 6 25 2003 10 03 58 AM Glossary signaling A hub consists of two portions the Hub Controller and Hub Repeater The repeater is a protocol controlled switch between the upstream port and downstream ports It also has hardware support for reset and suspend resume signaling The controller provides the interface registers to allow communication to from the host Hub specific status and control commands permit the host to configure a hub and to monitor and control its ports Device A logical or physical entity that performs a function The actual entity described depends on the context of the reference At the lowest level device may refer to a single hardware component as in a memory device At a higher level it may refer to a collection of hardware components that perform a particular function such as a Universal Serial Bus interface device At an even higher level device may refer to the f
22. computer monitor printer and so on should have the same power supply source The phasing conductor of the room s electrical installation should have a reserve short circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes A To completely switch off the equipment the power supply cable must be removed from the power supply socket which should be located near the equipment and easily accessible A protection mark B confirms that the equipment is in compliance with the protection usage requirements of standards PN 93 T 42107 and PN 89 E 06251 file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 9 of 13 6 25 2003 10 09 45 AM Regulatory Information Wymagania Polskiego Centrum Badan i Certyfikacji Lzzadzenie powinno byt zasilane z gniazda lt przyHsceonym obwodem ochronny gniazda z kal uen Wapdlpracuggce ze urzsdzenia komputer monitor drukarka powinny byt zxsilame topo sineto Instalacja elektryczna peanieseceoenta pewinna ziwierac w przewadizie Eazow yen ereraa achrang przexd zyvazrci rni w bezpeecenika o ssartasci zmamianawe me wiekszej not 164 amperi W celu calkowitego wylgceenia urzqdzenis z sieci zasilania nale y wtyczke kabla zasilaj cego z piiazdka kt re pavairino aig pobli u wrzadzema s byt tatan Znak bezpieezefisrwa B porwierdza zgodnos urzedzenia veymaganiami bezpiecze arwa usyt
23. hub solution Increasingly monitors include USB hub functionality But not all users need or want a USB hub To give users freedom of choice Philips provides an optional USB hub type number PCUH411 The USB hub consists of two parts that are normally connected one is functional the other aesthetic The aesthetic element is a removable cover With the cover removed the USB hub can be attached to the base or pedestal of monitor The attached USB hub can be rotated to any position around the monitor s base With this innovative Philips solution your USB hub is always within reach for convenient connection and disconnection of USB peripherals 6 What models are Mac compatible All listed Philips monitors are Mac compatible BUT you may need an adapter to connect the file D EDFU crt_17 edoc english FAQ HTM 1 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions monitor to your Mac system Please contact your dealer reseller for details T What is TCO TCO is a Swedish abbreviation for the Swedish Confederation of Professional Employees 8 What is MPR MPR is a Swedish abbreviation for the Swedish National Board of Measurement and Testing 9 What are the differences between MPRII TCO92 TCO95 TCO99 and TCO 03 In the general hierarchy of standards TCO 03 TCO989 is the highest level of certification Next is TCO95 which is better than TCO92 which in turn is better than MPRII Below we compare the standards i
24. press the A button until ADJUST SHAPE is Help highlighted Next start with step 3 under ADJUST SHAPE and follow the directions to exit completely press the 89 button RETURN TO TOP OF THE PAGE ADJUST SHAPE ADJUST SIDE CURVE ADJUST SIDE CURVE under ADJUST SHAPE allows you to adjust two of the five preset options These two options are PINCUSHION and BALANCED pincushion Note use these features only when the picture is not square 1 Press the 89 button on the monitor The MAIN CONTROLS window appears 2 Press the GF button until ADJUST SHAPE is highlighted MAIN CONTROLS LANGUAGE eOOM ADJUST HORIZONTAL ADJUST VERTICAL ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS MOVE SELECTION THEN lk 3 Press the highlighted 89 button The ADJUST SHAPE window appears ADJUST SIDE CURVE should be file D EDFU crt_17 edoc english OSD osd_cont htm 9 of 25 6 25 2003 10 10 05 AM The OSD Controls ADJUST SHAPE 2 ADJUST SIDE ANGLES ROTATE IMAGE BACK TO MAIN CONTROLS RIA MOVE SELECTION THEN 4 Press the 89 button The SIDE CURVE window appears PINCUSHION should be highlighted SIDE CURVE 3 BALANCED BACK TO ADJUST SHAPE 5 To adjust the pincushion press the 4 or button 6 When the pincushion is adjusted press the GF button to highlight BALANCED or press the 9 button to return to the ADJUST SHAPE window SIDE CURVE PINCU
25. serves as confirmation of ownership in the event of product loss or theft MODEL REGISTRATION Returning the attached card right away guarantees you ll receive all information and special offers for which your purchase makes you eligible So please act today www philipsusa com DETACH AND MAIL PORTION BELOW WARRANTY REG IST RATI O N CARD MODEL NUMBER SERIAL NUMBER Registering your product is an essential step to ensure that you receive all of the benefits you are entitled to as a Philips customer So complete the information below in ink and drop this card in the nearest mailbox IMPORTANT RETURN WITHIN TEN DAYS Purchase Month Day Year e LIT TTI TTI O LETT ITT ti iti ty First Initial Last Street Apt City Stace ZIP Coce Retail Your Phone etall 00 Number Price Paid optional Excluding sales tax maintenance agreement Area Code Phone Number delivery installation and trade in allowance E mail Address optional Doo p H LI E S Mail This Card Today To Get The Most From Your Purchase No do not want to receive personalized offers about Philips products or other information from Philips in the future 3135 015 07803 rev 7 02 SI FS7 1 AN LiSOd3Q Od SdlilHd jApduwoa u d aspal TIVII3 LVIAI Q3 Vq aMWil L dWVLS SSVT1D 15415 AlddV 3SV1 d IMPORTANT PHILIPS Warranty Registration Card RETURN THE ATTACHED CARD WITHIN
26. that can be displayed on your computer screen To get the most out of your video card you will need to either install the latest drivers onto your computer or upgrade the video cards memory Please check with your computer or video card manufacturer for further details 47 Why is there no picture on my monitor e Check the wall socket for power Verify that there is power by connecting another product e Ensure the power cable is correctly attached to both the wall socket and the monitor e Check that the power button is switched on e Unplug the monitor for approx 1 minute and plug it in again Switch the monitor back on 48 Whyis there no picture on my monitor even though the power LED is yellow amber or flashing green file D EDFU crt 17 edoc english FAQ HTM 11 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions e Reboot your computer while holding the Ctrl key on your computer If you see any picture during the boot procedure please verify the settings of your video card for Windows go to Control Panel and select Display e Check that the video cable is not damaged bent or that any of the pins in the connector are damaged please be aware that some VGA connectors have one missing pin If damaged replace with a new cable e Check that the cable is attached correctly to the computer e Press any key on the keyboard to wake up the computer from power saving mode 49 Whyis there no picture on my monitor even thou
27. to a color temperature setting of 6500K file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 6 of 9 6 25 2003 10 03 56 AM 107P Product Information For more information on sRGB please visit www srgb com These information are subject to change without notice RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA s DPMS compliance display card or software installed in your PC the monitor can automatically reduce its power consumption when not in use And if an input from a keyboard mouse or other input device is detected the monitor will automatically wake up The following table shows the power consumption and signaling of this automatic power saving features Power Management Definition VESA s Mode Video H sync V sync Power Used Power LED color Saving ON Active Yes Yes Typical 77 W 0 Green OFF Blanked No No lt 2W 97 Yellow This monitor is ENERGY STAR compliant As an ENERGY STAR Partner PHILIPS has determined that this product meets the ENERGY STAR guidelines for energy efficiency RETURN TO TOP OF THE PAGE Physical Specifications 15 7 x 16 1 x 16 5 399 x 410 x 419 mm including base Dimensions 15 7 x 14 7 x 16 5 399 x 373 x 419 mm excluding base Weight 17 5 kg Power supply 90 264 VAC 50 60Hz Temperature operating 0 to 40 C 32 to 104 F Temperature storage 25 to 65 C 13 to 149 F Relative humidity stora
28. to the OSD controls Contrast hotkey When the UP arrow is pressed the adjustment controls for the CONTRAST will show up file D EDFU crt_17 edoc english INSTALL_2 INSTALL HTM 1 of 6 25 2003 10 03 56 AM Installing your Monitor vj UP and DOWN buttons are used when adjusting the OSD of your monitor Brightness hotkey When the RIGHT arrow is pressed the adjustment controls for BRIGHTNESS will show up LEFT and RIGHT buttons like the UP and DOWN buttons are also used in adjusting the OSD of your monitor RETURN TO TOP OF THE PAGE Rear View file D EDFU crt_17 edoc english INSTALL_2 INSTALL HTM 2 of 6 25 2003 10 03 56 AM Installing your Monitor 1 Power in attach power cable here 2 Video In this is a cable which is already attached to your monitor Connect the other end of the cable to your PC RETURN TO TOP OF THE PAGE file D EDFU crt 17 edoc english INSTALL 2 INSTALL HTM 3 of 3 6 25 2003 10 03 56 AM On Screen Display On Screen Display Description of the On Screen Display The OSD Tree The OSD Controls Description of the On Screen Display What is the On Screen Display This is a feature in all Philips monitors which allows an end user to adjust screen performance of monitors directly through an on screen instruction window The user interface provides user friendliness and ease of use when operating the monitor Basic and simple instruction on the control k
29. twice lo adjust only the PARALLELOGRAM follow steps 1 4 above then press the button and follow steps 7 9 ROTATE IMAGE Not available in all models ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options These two options are PINCUSHION and BALANCED pincushion Note use this feature only when the picture is not square 1 Press the B button on the monitor The MAIN CONTROLS window appears 2 Press the GF button until ADJUST SHAPE is highlighted MAIN CONTROLS LANGUAGE eOOM ADJUST HORIZONTAL ADJUST VERTICAL ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS MOVE SELECTION THEN lk 3 Press the 9 button The ADJUST SHAPE window appears ADJUST SIDE CURVE should be highlighted 4 Press the CF arrow until ROTATE IMAGE is highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 14 of 25 6 25 2003 10 10 06 AM The OSD Controls ADJUST SHAPE ADJUST SIDE CURVE ADJUST SIDE ANGLES BACK TO MAIN CONTROLS MOVE SELECTION THEN 5 Press the 89 button The ROTATE IMAGE window appears ROTATE should be highlighted ROTATE IMAGE BACK TO ADJUST SHAPE 6 To adjust the rotation press the 4 or button 7 When the rotation is adjusted press the 89 button to return to the ADJUST SHAPE window BACK TO MAIN CONTROLS should be highlighted 8 Press the B button to return to MAIN CONTROLS After re
30. unlock this function Press and hold the OSD menu key for about 10 seconds until picture displays OSD MAIN MENU UNLOCKED 36 My screen shows NO SYNC INPUT how get rid of this Check the following for possible solutions e Bent pins on the video cable e Make sure the computer is turned on e Ensure the VGA Cable is properly connected e Ensure the BNC D Sub connector on the rear of the monitor is in the correct position file D EDFU crt 17 edoc english FAQ HTM 8 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions newer models have this option in the On Screen Display under Input Signal Selection e Video card may be not a VESA standard try the monitor with another computer 37 Why does my monitor display Out of Range The video card installed in your computer may be too high for the monitor s specifications Please contact your computer manufacturer for details on how to lower resolution for your operating system 38 What is Moire Why does my monitor have this wavy phenomenon Moire is a natural effect or phenomenon of CRT that has the appearance of a wavy pattern which is repetitive and superimposed on the screen as ripple images These are a few suggestions to help reduce or minimize the effects e Some monitors have a Moire cancellation feature activate it to the on position or adjust the Moire cancellation function via the OSD on the monitor e Change resolution to the recommended standard for the
31. 7P Product Information French German Italian Portuguese Spanish Simplified Chinese Traditional Chinese or Korean Installation 1 To install LightFrame place the CD in the CD ROM drive 2 Next when the menu of items on the CD appears on your screen click on Install LightFrame 3 Now follow the on screen prompts to properly install the program The software checks to see if you have a compatible monitor You must agree to the license agreement terms for the software to install 4 After installation LightFrame automatically loads and the icon appears in the taskbar Notes If LightFrame detects that your monitor is not LightFrame compatible a message appears on the monitor screen If you see this message you can select to abort or continue the installation However if you continue the installation LightFrame will probably not work on the monitor How to use LightFrame After installation LightFrame starts up automatically whenever the computer is started For information about using LightFrame please refer to the help information which is available after installation Compatibility This version of LightFrame is compatible with Windows 95 Windows 98 Windows Me Millenium Edition Windows XP Windows 2000 Professional Edition LightFrame 3 Frequently Asked Questions and answers LightFrame Q Is LightFrame 2 compatible with LightFrame 3 A No If you run LightFra
32. AM Frequently Asked Questions Select under Advanced Controls in the monitor s OSD Most computers require it to be set at 0 7V Please review the following for possible solutions e f the OSD menu is also dim please contact service for repair e Reset the monitor via the OSD menu e Change the color temperature settings to 9300 color coordination via the OSD menu e Set the Contrast to maximum level 100 and Brightness to middle level 50 Video card could be defective try the monitor with another computer 45 have noticed two thin horizontal lines on the screen of my Philips monitor Is this normal This phenomenon can occur with Philips 107P 109P and 201P monitors and is normal Your monitor is using an Aperture Grille which consists of fine vertical wires to align the electron beams with the phosphors on the screen To prevent these vertical wires from vibrating and to keep them properly aligned with the picture tube two horizontal damper wires are required These are located on one third and on two third from the top of the screen The result is that you will see two very thin horizontal lines over your screen since the two wires are casting a slight shadow on the screen surface You will find these wires line in any monitor from Philips and other brands using the Aperture Grille technology 46 How canl increase the color display of my monitor The amount of video memory your video card holds determines the amount of colors
33. C Philips Service V Mezihor 2180 00 Prague Phone 02 6831581 Fax 02 66310852 HUNGARY Philips Markaszerviz Kinizsi U 30 36Budapest 1092 Phone 01 2164428 Fax 01 2187885 POLAND Philips Polska CE UL Marszalkowska 45 49 00 648 Warszawa Phone 02 6286070 Fax 02 6288228 RUSSIA Philips Representation Office Ul Usacheva 35a 119048 Moscow Phone 095 937 9300 TURKEY T rk Philips Ticaret A S Talatpasa Caddesi No 5 80640 G ltepe Istanbul Phone 0800 211 40 36 Fax 0212 281 1809 file D EDFU crt_17 edoc english WARRANTY warcic htm 1 of 9 6 25 2003 10 10 26 AM Consumer Information Centers ANTILLES Philips Antillana N V Kaminda A J E Kusters 4 Zeelandia P O box 3523 3051 Willemstad Curacao Phone 09 4612799 Fax 09 4612772 ARGENTINA Vedia 3892 Capital Federal CP 1430 Buenos Aires Phone 011 4544 2047 Fax 011 4544 2928 BRASIL Philips da Amazonia Ind Elet Ltda Av Luis Carlos Berrini 1400 Sao Paulo SP Phone 0800 7010 203 CHILE Philips Chilena S A Avenida Santa Maria 0760 P O box 2687Santiago de Chile Phone 02 730 2000 Fax 02 777 6730 COLOMBIA Industrias Philips de Colombia S A Division de Servicio CARRERA 15 Nr 104 33 Bogota Colombia Phone 01 8000 111001 toll free Fax 01 619 4300 619 4104 MEXICO Consumer Information Centre Norte 45 No 669 Col Industrial Vallejo C P 02300 Mexico D F Phon
34. Designed for Windows logo means your Philips monitor fulfills the requirements and recommendations of the PC9x 97 98 or 99 System Design Guide and passes stringent WHQL tests 2 What is USB Think of USB as a smart plug for PC peripherals USB automatically determines resources like driver software and bus bandwidth required by peripherals USB makes necessary resources available without user intervention Its three main benefits are e USB eliminates Case angst the fear of removing the computer case to install circuit board cards that often require adjustment of complicated IRQ settings for add on peripherals e USB does away with port gridlock Without USB PCs are normally limited to one printer two Com port devices usually a mouse and modem one Enhanced Parallel Port add on scanner or video camera for example and a joystick More and more peripherals for multimedia computers come on the market every day With USB up to 127 devices can run simultaneously on a computer e USB permits hot plug in No need to shut down plug in reboot and run set up to install peripherals No need to go through the reverse process to unplug a device Bottom line USB transforms today s Plug and Pray into true Plug and Play 3 What is a USB hub Think of USB hub as a extension of USB ports Normally the PC provides only one or two USB ports To connect additional USB devices you need a USB hub 4 What is Philips Monitors USB
35. ION THEN X SERIAL NUMBER TY 123456 RESOLUTION 1024 768 1280 1024 FREQUENCY 69K 85HZ 64K 60HZ 5 Pess the K button LIGHTFRAME will be activated 6 Press S to go back to MAIN CONTROLS Press B button again to exit the OSD RETURN TO TOP OF THE PAGE CLOSE MAIN CONTROLS file D EDFU crt_17 edoc english OSD osd_cont htm 24 of 25 6 25 2003 10 10 06 AM The OSD Controls MAIN CONTROLS LANGUAGE eOOM ADJUST ADJUST ADJUST ADJUST HORIZONTAL VERTICAL SHAPE COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS MOVE SELECTION THEN amp l RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english OSD osd_cont htm 25 of 25 6 25 2003 10 10 06 AM First Choice Warranty Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor All Philips monitors are designed and manufactured to high standards and deliver high quality performance ease of use and ease of installation Should you encounter any difficulties while installing or using this product please contact the Philips helpdesk directly to benefit from your Philips First Choice Warranty This three year service warranty entitles you to a swap model on site if your monitor turns out to be faulty or defective Philips aims at a swap within 48 hours of your call being received What is covered The Philips First Choice Warranty applies within Andorra Austria Belgium Cyprus Denmark France Germany Greece Finland
36. MENT 5500K FOR PHOTO RETOUCH sRGB USER PRESET RED GREEN BLUE MOVE SELECTION THEN KJ BACK TO MAIN CONTROLS OR ADJUST USER PRESET THEN X file D EDFU crt 17 edoc english OSD osd cont htm 16 of 25 6 25 2003 10 10 06 AM The OSD Controls 4 Press the A or button to highlight 9300K for GENERAL USE 6500K for IMAGE MANAGEMENT 5500K for PHOTO RETOUCH or USER PRESET 5 Once you have highlighted GENERAL USE IMAGE MANAGEMENT or PHOTO RETOUCH press the button to confirm you selection and return to the MAIN CONTROLS window CLOSE MAIN CONTROLS will be highlighted ADJUST COLOR 2300K FOR GENERAL USE 6500K FOR IMAGE MANAGEMENT 5500K FOR PHOTO RETOUCH sRGB MOVE SELECTION THEN BACK TO MAIN CONTROLS OR R ADJUST USER PRESET THEN X 6a If USER PRESET is highlighted press the button to highlight RED Next press the or Ie button to adjust the color red 6b When finished with RED press the button to highlight GREEN Next press button to adjust the color green 6c When finished GREEN press the button to highlight BLUE Next press the button to adjust the color blue 6d When all adjustments are complete press the 89 button to confirm your adjustments and return to the MAIN CONTROLS window CLOSE MAIN CONTROLS will be highlighted After returning to MAIN CONTROLS Help RESET TO FACTORY SETTINGS is highlighted Next start with step 3 under RE
37. Maroc 304 BD Mohamed V Casablanca Phone 02 302992 Fax 02 303446 SOUTH AFRICA South African Philips S V Div 195 Main R D Martindale Johannesburg P O box 58088 Newville 2114 Phone 011 4715000 Fax 011 4715020 Middle East file D EDFU crt_17 edoc english WARRANTY warcic htm 8 of 9 6 25 2003 10 10 26 AM Consumer Information Centers DUBAI Philips Middle East B V Consumer Information Centre P O Box 7785 DUBAI Phone 04 3353666 Fax 04 3353999 EGYPT Philips Egypt Consumer Information Centre 10 Abdel Rahman EI Rafei Mohandessin Cairo P O Box 242 DOKKI Phone 02 3313993 Fax 02 3492142 file D EDFU crt_17 edoc english WARRANTY warcic htm 9 of 9 6 25 2003 10 10 26 AM PHILIPS Warranty Card 8 16 02 12 38 PM Page 1 2 It Takes Only A Moment To PROTECT YOUR INVESTMENT Congratulations on investing in a Philips product It s an important and intelligent decision that s sure to reward you for many years to come To ensure you ll get all of the privileges and protection that come with your purchase please complete your Warranty Registration Card within the next ten days SIMPLY MAIL THE CARD BELOW TO RECEIVE ALL OF THESE BENEFITS TO WHICH YOU RE ENTITLED WARRANTY VERIFICATION Your prompt registration verifies your right to protection under the terms and conditions of your warranty OWNER CONFIRMATION Your completed Warranty Registration Card
38. ONTAL is highlighted MAIN CONTROLS LANGUAGE eOoOM ADJUST VERTICAL ADJUST SHAPE ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS MOVE SELECTION THEN 0 3 Press the 89 button The ADJUST HORIZONTAL window appears POSITION should be highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 5 of 25 6 25 2008 10 10 05 AM The OSD Controls ADJUST HORIZONTAL so e C _ so B BACK TO MAIN CONTROLS 4 Press the 4 button to move the image to the left or right 5 When the position is adjusted press the 89 button to return to MAIN CONTROLS window or press the highlight SIZE ADJUST HORIZONTAL 88 POSITION E so XI BACK TO MAIN CONTROLS 6 To adjust the horizontal size press the 4 orm button 7 When the size is adjusted press the 89 button to return to MAIN CONTROLS window CLOSE MAIN CONTROLS will be highlighted After returning to MAIN CONTROLS A Help the directions to continue to ADJUST VERTICAL press the button until ADJUST smart VERTICAL is highlighted Next start with step 3 under ADJUST VERTICAL and follow to exit completely press the 89 button file D EDFU crt_17 edoc english OSD osd_cont htm 6 of 25 6 25 2008 10 10 05 AM The OSD Controls RETURN TO TOP OF THE PAGE ADJUST VERTICAL ADJUST POSITION under ADJUST VERTICAL shifts the image on your screen either up or down
39. Q How many pictures can LightFrame enhance in Internet Explorer A In Internet Explorer LightFrame can enhance up to 16 pictures at the same time LightFrame filters the pictures it finds based on the minimum size of the picture therefore it may happen that some pictures are not enhanced when you open a web page Q Can I enhance two or more area s at the same time file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 3 of 9 6 25 2003 10 03 56 AM 107P Product Information A Yes With LightFrame 3 you have the possibility to select several windows with pictures and videos and enhance them at the same time Q Some times my mouse changes to a light bulb with a plus sign and sometimes with a minus sign What is the difference A The mouse pointer in the shape of a light bulb indicates that LightFrame is ready to accept a selection from you for which window should be enhanced If there is a minus sign it means that you are moving over a window where LightFrame is already active and clicking this window will switch the enhancement off A plus sign appears when moving over a window which is not enhanced and clicking that one will enable LightFrame on that window Q What is wrong when my mouse changes into a light bulb with a red cross A Nothing It just means that your mouse moves outside the application where you already have one or more windows enhanced You can only select windows with in the same applicat
40. RE HORIZONTAL ffor 107E 707 models awy VERTICAL DEGALISS for 307 T 107 C modais only ADJUST CONVERGENCE H CI smi 107 LC VERTICAL CLOSE MAIN CONTROLS Sbecficztianr rubiect ds dhonge vilo briar ponce RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english OSD OSDDESC HTM 3 of 3 6 25 2003 10 03 57 AM Customer Care and Warranty Customer Care amp Warranty PLEASE SELECT YOUR COUNTRY AREA TO READ THE WARRANTY COVERED WESTERN EUROPE Austria Belgium Cyprus Denmark France Germany Greece Finland Ireland Italy Luxembourg the Netherlands Norway Portugal Sweden Switzerland Spain United Kingdom EASTERN EUROPE Czech Republic Hungary Poland Russia Turkey Bulgaria LATIN AMERICA Antilles Argentina Brazil Chile Colombia Mexico Paraguay Peru Uruguay Venezuela NORTH AMERICA USA amp Canada 107E G only USA amp Canada all other models PACIFIC Australia New Zealand ASIA Bangladesh China Hong Kong India Indonesia Japan Korea Malaysia Pakistan Philippines Singapore Taiwan Thailand AFRICA Morocco South Africa MIDDLE EAST Dubai Egypt file D EDFU crt_17 edoc english WARRANTY WARRANTY HTM 6 25 2003 10 03 57 AM Frequently Asked Questions Frequently Asked Questions 1 What does the Designed for Windows logo signify The
41. SET TO FACTORY SETTINGS A Smart to continue to RESET TO FACTORY SETTINGS press the ak button until lo exit completely press the fa button file D EDFU crt_17 edoc english OSD osd_cont htm 17 of 25 6 25 2003 10 10 06 AM The OSD Controls RETURN TO TOP OF THE PAGE RESET TO FACTORY SETTINGS RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets 1 Press the 69 button on the monitor The MAIN CONTROLS window appears 2 Press the GF button until RESET TO FACTORY SETTINGS is highlighted CONTROLS LANGUAGE eOOM ADJUST HORIZONTAL ADJUST VERTICAL ADJUST SHAPE ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS MOVE SELECTION THEN amp l 3 Press the 3 button The RESET TO FACTORY SETTINGS window appears 4 Press the 2 or GF button to select YES or NO NO is the default YES returns all settings to their original factory adjustments RESET TO FACTORY SETTINGS mm NO t YES RIA MOVE SELECTION THEN j BACK TO MAIN CONTROLS 5 Press the 69 button to confirm your selection and return to the MAIN CONTROLS window CLOSE file D EDFU crt_17 edoc english OSD osd_cont htm 18 of 25 6 25 2003 10 10 06 AM The OSD Controls MAIN CONTROLS will be highlighted After returning to MAIN CONTROLS A Smart i 19 continue to EXTRA CONTROLS press the button until EXTRA CONTROLS is highlighted Next start wi
42. SHION 5o ik BACK TO ADJUST SHAPE file D EDFU crt_17 edoc english OSD osd_cont htm 10 of 25 6 25 2003 10 10 05 AM The OSD Controls 7 To adjust the balanced pincushion press the 4 button 8 When the balanced pincushion is adjusted press the B button to return to the ADJUST SHAPE window BACK TO MAIN WINDOWS will be highlighted 9 Press the button to return to the MAIN CONTROLS window or press the A button until ADJUST SIDE ANGLES is highlighted After returning to MAIN CONTROLS 2 lo continue to ADJUST SIDE ANGLES start with step 5 under ADJUST SIDE Smart ANGLES and follow the directions Help lo exit completely press the 3 button twice lo adjust only the BALANCED pincushion follow steps 1 4 above then press the button and follow steps 7 9 ADJUST SIDE ANGLES ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options These two options are TRAPEZOID and PARALLELOGRAM Note use these features only when the picture is not square 1 Press the 89 button on the monitor The MAIN CONTROLS window appears 2 Press the GF button until ADJUST SHAPE is highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 11 of 25 6 25 2003 10 10 05 AM The OSD Controls MAIN CONTROLS LANGUAGE eOOM ADJUST HORIZONTAL ADJUST VERTICAL ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS
43. approach introduced into the PC market to increase user friendliness The three levels developed for Plug amp play are 1 DDC1 monitor send data to the PC 2 DDC2B PC can request information from monitor and 3 DDC2Bi which is a two way communication monitor can be addressed and PC or graphics board can give commands to monitor DDC 1 2B See DDC DDC 2Bi See DDC Degaussing The procedure of demagnetizing the shadow mask and associated metal parts of a picture tube at switch on to minimize picture distortion This is usually accomplished by means of a special degaussing coil through which a decaying alternating current is passed to generate an alternating magnetic field that gradually decays to demagnetize the tube Some monitors offer a manual degaussing facility that can be activated at any time Digital control Microprocessor based digital control of picture parameters and video modes for complete control of picture settings and modes and instant recall of all settings at the push of a button This is a very advanced feature that allows the user to switch to any required mode at any instant without having to spend time readjusting the picture It is currently available in most Philips monitors Dot pitch The shortest distance between two phosphor dots of the same color on the screen The smaller the dot pitch the better the resolution of the monitor file D EDFU crt_17 edoc english GLOSSARY GLOSSARY HTM 4 of 18
44. ation have a value of 5A If a plug without a fuse is used the fuse at the distribution board should not be greater than 5A Note The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere How to connect a plug The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL N BROWN _ LIVE 07 GREEN amp YELLOW EARTH E 1 The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol sb or coloured GREEN or GREEN AND YELLOW 2 he BLUE wire must be connected to the terminal which is marked with the letter N or coloured BLACK 3 The BROWN wire must be connected to the terminal which marked with the letter L or coloured RED Before replacing the plug cover make certain that the cord grip is clamped over the sheath of the lead not simply over the three wires RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 13 of 13 6 25 2003 10 09 45 AM Other Related Information Other Related Information Safety Precautions and Maintenance Troubleshooting Regulatory Information Information for Users in the U S Information for Users Outside the U S Information for Users in the U S For units set at 115 V Use a UL Listed Cord Set consisting of a minimum 18 AWG Type SVT o
45. btained via the Internet using the address http www tco info com RETURN TO TOP OF THE PAGE Environmental Requirements Flame retardants Flame retardants are present in printed circuit boards cables wires casings and housings Their purpose is to prevent or at least to delay the spread of fire Up to 3096 of the plastic in a computer casing can consist of flame retardant substances Most flame retardants contain bromine or chloride and those flame retardants are chemically related to another group of environmental toxins PCBs Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects including reproductive damage in fish eating birds and mammals due to the bio accumulative processes Flame retardants have been found in human blood and researchers fear that disturbances in fetus development may occur The relevant TCO 95 TCO 99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine Flame retardants are allowed in the printed circuit boards since no substitutes are available file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 2 of 13 6 25 2003 10 09 45 AM Regulatory Information Cadmium Cadmium is present in rechargeable batteries and in the color generating layers of certain computer displays Cadmium damages the nervous system and is toxic in h
46. ce refer to the Consumer Information Centers list to contact your local Philips distributor RETURN TO TOP OF THE PAGE file D EDFU crt 17 edoc english 107P SAFETY saf troub htm 2 of 2 6 25 2003 10 09 44 AM Regulatory Information Regulatory Information TCO 95 99 Information e 95 99 Environmental Requirements TCO 03 Information Recycling Information for Customers CE Declaration of Conformity Energy Star Declaration Federal Communications Commission FCC Notice U S Only Commission Federale de la Communication FCC Declaration EN 55022 Compliance Czech Republic Only VCCI Class 2 Notice Japan Only MIC Notice South Korea Only Polish Center for Testing and Certification Notice North Europe Information Nordic Countries BSMI Notice Taiwan Only Ergonomie Hinweis nur Deutschland Philips End of Life Disposal Information for UK only Safety Precautions and Maintenance Troubleshooting Other Related Information TCO 95 99 Information For TCO Model Only Congratulations You have just purchased a TCO 95 or TCO 99approved and labeled product Your choice has provided you with a product developed for professional use Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products Why do we have environmentally labeled compute
47. cessary clean with a slightly damp cloth Disconnect the monitor from the power supply before cleaning e When positioning the monitor make sure the power plug and outlet are easily accessible Consult a service technician if the monitor does not operate normally when operating instructions of this manual are followed RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english 107P SAFETY SAFETY HTM 6 25 2003 10 03 55 AM About This Electronic User s Manual About This Electronic User s Manual About This Guide Other Documents You May Need Notational Descriptions About This Guide This electronic user s guide is intended for anyone who uses the Philips Color Monitor It describes the monitor s features setup operation and all other information which is the same exact information described in our printed version The sections are as follows e Safety and Troubleshooting Information provides tips and solutions for common problems and other related information you may need e About This Electronic User s Manual gives overview of what information are included as well as notation icon descriptions and other documentation you can refer to e Product Information gives an overview of the monitor s features and as well as the technical specifications for this monitor e Installing Your Monitor describes the initial setup process and gives an overview of how to use the monitor e On Screen Display provides information on
48. clusion may not apply to you This includes but is not limited to prerecorded material whether copyrighted or not copyrighted e a product used for commercial or institutional purposes Where IS SERVICE AVAILABLE Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics In countries where Philips Consumer Electronics does not distribute the product the local file D EDFU crt_17 edoc english WARRANTY WAR_USA HTM 1 of 6 25 2003 10 10 11 AM United States Guarantee Philips service organization will attempt to provide service although there may be a delay if the appropriate spare parts and technical manual s are not readily available Where CAN I GET MORE INFORMATION For more information contact the Philips Customer Care Center by calling 877 835 1838 U S A customers only or 402 536 4171 Before Requesting Service Please check your owner s manual before requesting service Adjustments of the controls discussed there may save you a service call TO GET WARRANTY SERVICE IN U S A PUERTO RICO OR U S VIRGIN ISLANDS Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing Philips Customer Care Center 877 835 1838 or 402 536 4171 In U S A Puerto Rico and U S Virgin Islands all implied warranties including implied warranties of merchantability and fitness for a parti
49. computer is turned on Make sure the monitor cable is properly connected to your computer e Check to see if the monitor cable has bent pins e Change the settings of resolution and or refresh rate of your computer Refer to the Quick Start Guide or contact your computer vender for details The Energy Saving feature may be activated Drag your mouse or click any keypad on your keyboard to exit Energy Saving mode Make sure the computer is turned on Make sure the monitor cable is properly connected to your computer Check to see if the monitor cable has bent pins Press OK and UP knobs on front control panel simultaneous to switch the Input Signal A B not for all monitors Make sure the Brightness and Contrast controls are set correctly Make sure the monitor cable is properly connected to your computer Check to see if the monitor cable has bent pins file D EDFU crt_17 edoc english 107P SAFETY saf_troub htm 1 of 2 6 25 2003 10 09 44 AM Troubleshooting The screen says CONTROL MENU IS LOCKED when you press the OK knob Picture is too large or too small Edges of the picture are not square Color appears blotchy Missing one or more colors Dim Picture Picture has double image Picture is not sharp Unstable picture e Press the OK knob and hold for around 15 seconds to release the lock e Adjust the Horizontal Size and or Vertical Size Refer to the On Screen Display chapter for de
50. ct Reception problems caused by signal conditions or cable or antenna systems outside the unit Defects caused by abuse or misuse of the monitor Product requires modification or adaptation to enable it to comply with local or national technical standards which apply in countries for which the product was not originally designed manufactured approved and or authorized Therefore always check whether a product can be used in a specific country e Note that products that are not originally designed manufactured approved and or authorized for usage within the Philips First Choice countries do not apply to the Philips First Choice Warranty In these cases the Philips global warranty terms are valid Just a phone call away file D EDFU crt_17 edoc english WARRANTY war_1st htm 1 of 2 6 25 2003 10 10 11 AM First Choice Warranty In order to avoid unnecessary inconvenience we advise you to read the operating instructions carefully before contacting the Philips helpdesk To solve your problem quickly please prepare the following details before contacting the Philips helpdes e Philips type number e Philips serial number e Purchase date copy of purchase may be required e PC environment Processor o 286 386 486 Pentium Pro Internal memory o Operating system Windows DOS OS 2 MAC o Fax Modem Internet program e Other cards installed Having the following information available will also help speed up the process e Your proof o
51. cular purpose are limited in duration to the duration of this express warranty But because some states do not allow limitations on how long an implied warranty may last this limitation may not apply to you TO GET WARRANTY SERVICE IN CANADA Please contact Philips at 800 479 6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers In Canada this warranty is given in lieu of all other warranties No other warranties are expressed or implied including any implied warranties of merchantability or fitness for a particular purpose Philips is not liable under any circumstances for any direct indirect special incidental or consequential damages howsoever incurred even if notified of the possibility of such damages REMEMBER Please record the model and serial numbers found on the product below MODEL SERIAL This warranty gives you specific legal rights You may have other rights which vary from state province to state province file D EDFU crt_17 edoc english WARRANTY WAR_USA HTM 2 of 6 25 2003 10 10 11 AM United States Guarantee Philips Customer Care Center P O Box 2976 Longview TX 75601 Your International Philips First Choice Warranty Thank you for purchasing this Philips monitor All Philips monitors are designed and manufactured to high standards and deliver high quality performance ease of use and ease
52. d Philips monitors deliver TV quality video and photo display while maintaining monitor performance for text based applications The result is that movies and other video are brighter and livelier photos are more vibrant and lifelike 19 Will anyone else have this LightFrame was invented developed and patented by Philips It is a unique feature that you will find exclusively in Philips monitors 20 Will LightFrame shorten the life of a monitor No Extensive testing has confirmed LightFrame does not adversely affect monitor life Today s state of the art Philips monitors employ improved phosphors and are designed for high light output LightFrame normally highlights photos and videos Though the peak brightness of the highlighted area is strongly increased the average brightness a determining factor for cathode deterioration is not normally increased In any case a special Automatic Beam Limiter ABL circuit keeps a monitor s maximum average brightness within acceptable levels 21 get a message warning that my monitor may not support LightFrame am certain my monitor does What is wrong Only a Philips driver can determine if your monitor is equipped with LightFrame a generic Windows driver cannot Install the special Philips driver that came with your monitor If the warning continues to flash after your Philips driver is installed ignore the message LightFrame will function properly file D EDFU c
53. e 05 3687788 9180050462 Fax 05 7284272 file D EDFU crt_17 edoc english WARRANTY warcic htm 2 of 9 6 25 2003 10 10 26 AM Consumer Information Centers PARAGUAY Philips del Paraguay S A Avenida Artigas 1513 Casilla de Correos 605 Asuncion Phone 021 211666 Fax 021 213007 PERU Philips Peruana S A Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone 01 2136200 Fax 01 2136276 URUGUAY Ind Philips del Uruguay S A Lius Alberto de Herrera 1248 P 10 Customer Help Desk 11300 Montevideo Phone 02 6281 111 Fax 02 6287777 VENEZUELA Industrias Venezolanas Philips S A Apartado Postal 1167 Caracas 1010 A Phone 02 2377575 Fax 02 2376420 CANADA Philips Electronics Ltd 281 Hillmount Road Markham Ontario L6C 2S3 Phone 800 479 6696 Fax 905 887 3974 AUSTRALIA Philips Consumer Service Customer Information Centre 3 Figtree Drive Homebush Bay NSW 2140 Phone CIC 1300 363 391 PCE Service 1 300 361 392 Fax 61 2 9947 0063 file D EDFU crt_17 edoc english WARRANTY warcic htm 3 of 9 6 25 2003 10 10 26 AM Consumer Information Centers NEW ZEALAND Philips New Zealand Ltd Consumer Help Desk 2 Wagener Place Mt Albert P O box 1041 Auckland Phone 0800 477 999 Toll Free Fax 0800 288 588 BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C A Dhaka 1215 Phone 02 812909 Fax 02 813062 CHINA
54. e C P O box 3680 260 199 Itaewon Dong Yongsan Ku Seoul 140 202 Phone 080 600 6600 Toll Free Fax 02 709 1245 MALAYSIA Philips Malaysia Sdn Berhad Service Dept No 51 sect 13 Jalan University 46200 Petaling Jaya Selagor P O box 12163 50768 Kuala Lumpur Phone 03 7950 5501 02 Fax 03 7954 8504 PAKISTAN KARACHI Philips Electrical Ind of Pakistan Consumer Information Centre F 54 S I T E P O Box 7101 75730 KARACHI Phone 021 773 1927 Fax 021 772 1167 Philips Consumer Service Centre 168 F Adamjee Road Rawalpindi Cantt Phone 021 773 1927 Fax 021 772 1167 PHILIPPINES Philips Electronics and Lighting Inc 106 Valero St Salcedo Village Makati Metro Manilla Phone 02 888 0572 Domestic Toll Free 1 800 10 PHILIPS or 1 800 10 744 5477 Fax 02 888 0571 file D EDFU crt_17 edoc english WARRANTY warcic htm 7 of 9 6 25 2003 10 10 26 AM Consumer Information Centers SINGAPORE Philips Singapore Private Ltd Consumer Service Dept Lorong 1 Toa Payoh P O box 340 Singapore 1231 Phone 6882 3999 Fax 6250 8037 TAIWAN Philips Taiwan Ltd Consumer Information Centre 26F 66 Chung Hsiao W Road Sec 1 Taipei Taiwan Phone 02 2382 4567 0800 231 099 Fax 02 2382 3027 THAILAND Philips Electronics Thailand Ltd Philips Service Centre 209 2 Sanpavut Road Bangna Bangkok 10260 Phone 02 652 8652 Fax 02 614 3531 MOROCCO Philips Electronique
55. e it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications e incidental or consequential damages resulting from the product Some states do not allow the exclusion of incidental or consequential damages so the above exclusion may not apply to you This includes but is not limited to prerecorded material whether copyrighted or not copyrighted e a product used for commercial or institutional purposes e A product that has been modified from the original design Where IS SERVICE AVAILABLE Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics In countries where Philips Consumer Electronics does not distribute the product the local Philips service organization will attempt to provide service although there may be a delay if the appropriate spare parts and technical manual s are not readily available Where CAN I GET MORE INFORMATION and HOW CAN I OBTAIN SERVICE For more information contact the Philips Customer Care Center by calling 877 835 1838 U S A file D EDFU crt_17 edoc english WARRANTY 7sxWAR_USA HTM 1 of 3 6 25 2003 10 10 11 AM United States Guarantee customers only or 402 536 4171 Before Requesting Service Please check your owner s manual before requesting service Adjustments of the controls discussed there may save
56. e or cash receipt indicating the date of purchase dealer s name and model and production number of the product The Philips guarantee may not apply if e the documents have been altered in any way or made illegible e the model or production number on the product has been altered deleted removed or made illegible e repairs or product modifications and alterations have been executed by unauthorized service organizations or persons e damage is caused by accidents including but not limited to lightning water or fire misuse or neglect Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and or manufactured Therefore always check whether a product can be used in a specific country In case your Philips product is not working correctly or is defective please contact your Philips dealer In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country the telephone and fax number of which can be found in the relevant part of this booklet In order to avoid unnecessary inconvenience we advise you to read the operating instructions carefully before contacting your dealer If you have questions which your dealer cannot answer or any related question pl
57. e s useful life Thanks to Auto Calibrate a monitor with a normal life of 10 000 hours for example would last for 13 300 hours a full one third longer file D EDFU crt_17 edoc english FAQ HTM 7 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions 32 How does Auto Calibrate work During the calibration process different predefined black and white images are displayed on thescreen The beam currents of the red green and blue cannon are accurately measured and compared to the original values stored in the monitor By readjusting gain values of the individual cannons deviation is reduced to zero Default values are stored during production If the user sets a new color temperature this new value is saved as the new default value 33 When should calibration be performed The calibration process takes less than six seconds During this period different specific images are displayed After the process is finalized the original image is redisplayed Constant re calibration is not required Calibration should be performed after the monitor is warmed up Auto Calibration takes place when a monitor receives a signal indicating an imminent switch to its sleep mode stand by mode 34 Which models of Philips monitors are equipped with Auto Calibrate feature Auto Calibrate is currently available in the new 201P 201B and 109P 35 The Main Menu displays OSD MAIN MENU LOCKED Pressing the front control panels hasno effect How can I
58. ease contact the Philips Consumer Information Centers or via Website http www philips com file D EDFU crt_17 edoc english WARRANTY war_intl htm 6 25 2003 10 10 11 AM United States Guarantee LIMITED WARRANTY Computer Monitor Click here to access the Warranty Registration Card One Year Exchange Product will be exchanged with a new or renewed to original specifications unit within two business days for the first year WHO IS COVERED You must have proof of purchase to receive warranty service A sales receipt or other document showing that you purchased the product as new is considered proof of purchase WHAT IS COVERED Warranty coverage begins the day you buy your product For one year thereafter all parts will be repaired or replaced and labor is free All parts including repaired and replaced parts are covered only for the original warranty period When the warranty on the original product expires the warranty on all replaced and repaired products and parts also expires WHAT IS EXCLUDED Your warranty does not cover e labor charges for installation or setup of the product adjustment of customer controls on the product and installation or repair of systems outside of the product e product repair and or part replacement because of misuse accident unauthorized repair or other cause not within the control of Philips Consumer Electronics e a product that requires modification or adaptation to enabl
59. electronic user s manual PHILIPS Philips home Safety and trouble shooting About this manual Product information Installing your monitor On screen display Customer care and warranty FAQ Glossary Download amp print EXIT file D EDFU crt_17 edoc english 107P manual html 6 25 2003 10 03 50 AM Safety amp Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance Troubleshooting Regulatory Information Other Related Information Safety precautions and maintenance WARNING Use of controls adjustments or procedures other than those specified in this documentation may result in exposure to shock electrical hazards and or mechanical hazards Read and follow these instructions when connecting and using your computer monitor e Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time e Do not attempt to remove the back cover as you will be exposed to a shock hazard The back cover should only be removed by qualified service personnel e Do not place objects on top of the monitor cabinet objects could fall into vents or cover them and prevent proper cooling of the monitor s electronic devices e To avoid the risk of shock or permanent damage to the set do not expose the monitor to rain or excessive moisture e Do not use alcohol or ammonia based liquid to clean the monitor If ne
60. eys On the front controls of your monitor once you press the 69 button the On Screen Display OSD Main Controls window will pop up and you can now start making adjustments to your monitor s various features Use the 4 K or the ry OF keys to make your adjustments within file D EDFU crt_17 edoc english OSD OSDDESC HTM 1 of 6 25 2008 10 03 56 AM On Screen Display MAIN CONTROLS ZOOM ADJUST HORIZONTAL ADJUST VERTICAL ADJUST SHAPE ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS D 1 eo En Fa CLOSE MAIN CONTROLS MOVE SELECTION THEN RETURN TO TOP OF THE PAGE The OSD Tree Below is an overall view of the structure of the On Screen Display You can use this as reference when you want to later on work your way around the different adjustments file D EDFU crt_17 edoc english OSD OSDDESC HTM 2 of 3 6 25 2008 10 03 57 AM On Screen Display CRT OSD tree English Firet Level Second Level Third Level LANGUAGE pu Not available for 107E 107 modais ed 2 VOE lar far 107E 107X models ZOOM ADJUST HORIZONTAL E PCXSIT IIS SE ADLET VEIRA POSTION SIZE SIDE CURVE L MLN ea ADJUST SIDE ANGLES E TRAPEZOID ROTATE IMAGE ROTATE 300 POR GENERAL USE ADJUST COLOR i LEER PRESET RED GREEN BLUE 93006 FOA GENERAL USE 65008 FOR IMAGE MANAGEMENT PRESET EXTRA CONTROLS ADJUST MO
61. f data WARNING This icon indicates the potential for bodily harm and tells you how to avoid the problem SMART HELP This icon indicates helpful information when adjusting the On Screen Display of your monitor N A A A Some warnings may appear in alternate formats and may be unaccompanied by an icon In such cases the specific presentation of the warning is mandated by regulatory authority RETURN TO TOP OF THE PAGE 2003 Koninklijke Philips Electronics N V All rights reserved Reproduction copying usage modifying hiring renting public performance transmission and or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N V file D EDFU crt_17 edoc english 107P ABOUT ABOUT HTM 2 of 2 6 25 2003 10 03 55 AM 107P Product Information Product Information Product Features LightFrame for Windows Technical Specifications Automatic Power Saving Physical Specification Pin Assignment Product Views Product Features 107P40 e 17 inch 16 0 VIS Real Flat color monitor featuring ICE technology for excellent front of screen performance for use with MACs PCs e Autoscan covers horizontal frequencies up to 97 kHz offering a maximum resolution of 1920 x 1440 with flicker free display of 1024 x 768 up to 115 Hz Flat aperture grille CRT with high resolution 0 25 mm stripe pitch LightFrame for brightest and sharpest display of movie and phot
62. f purchase indicating date of purchase dealer name model and product serial number e The full address to which the faulty monitor has to be collected and the swap model should be delivered Philips customer help desks are located worldwide You can contact Philips Monday Friday from 08 00 20 00 hrs Central European Time CET and on Saturdays and Sundays from 10 00 to 18 00 hrs CET by using one of the helpdesk telephone numbers Click here to access the F1rst Choice Contact Information Or you can reach us via Website http www philips com file D EDFU crt_17 edoc english WARRANTY war_1st htm 2 of 2 6 25 2003 10 10 11 AM International Guarantee Your International Guarantee Dear Customer Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards If unfortunately something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer The Philips guarantee applies provided the product is handled properly for its intended use in accordance with its operating instructions and upon presentation of the original invoic
63. formance ease of use and ease of installation Should you encounter any difficulties while installing or using this product please contact Philips directly to benefit from your Philips Flrst Choice Warranty This one year service warranty entitles you to a swap model on site within 48 hours of your call being received within the first year of purchase If you have any problems with your monitor within the second or third year of purchase we will repair it after it has been sent to the service provider at your expense and returned to you within five working days free of charge An extended warranty called Philips Flrst Choice Premium is available in addition to your Philips First Choice warranty For more details contact your Philips dealer Before contacting Philips please prepare the following details so we can solve your problem quickly Philips type number Philips serial number Purchase date copy of purchase may be required PC environment Processor o 286 386 486 Pentium Pro Internal memory O Operating system Windows DOS OS 2 MAC o Fax Modem Internet program e Other cards installed Having the following information available will also help speed up the process e Your proof of purchase indicating date of purchase dealer name model and product serial number e The full address to which the swap model should be delivered Philips warranty applies provided the product is handled properly for its intended use Philips warra
64. g the degaussing coil This is what stops the degausser and this device s resistance will decrease as it cools back off enabling the degauss function to operate again This is an intentional design and is an industry standard not just for Philips monitors Please be aware that not all models in the Philips range has this manual degauss function Some models are built with an auto degauss feature which automatically degausses the monitor when it is switched on 42 How do 1 adjust the picture on the screen Please perform the following to correct the picture image e Reset your monitor via the OSD menu e Adjust the Horz width and or Vert size height in the OSD e Change monitor timing to work at the recommended resolution 43 The edge of the picture on the screen appears to be distorted How can I correct this Please perform the following to correct the picture image e A magnetic or electrical interference typically causes poor geometry in the picture Place the monitor in a different physical location e Reset the monitor to the factory preset via the OSD menu e Access the Geometry Menu in the OSD of the Monitor and perform the necessary adjustments e Change the monitor timing to the recommended resolution 44 The picture appears too dim How can I correct this Adjust Brightness and or Contrast via the monitor s OSD Some models have a Video Input file D EDFU crt_17 edoc english FAQ HTM 10 of 12 6 25 2003 10 03 57
65. ge 5 to 95 file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 7 of 9 6 25 2003 10 03 56 AM 107P Product Information Resolution 1280 x 1024 standard size contrast max brightness 50 9300 full white pattern These information are subject to change without notice RETURN TO TOP OF THE PAGE Pin Assignment The 15 pin D sub connector male of the signal cable IBM systems zm video input Green video input Blue video input video Blue video input Identical output connected to pin 10 Ground 7 Red video E Green video ground video ground No pin 10 jLogic ground 11 Identical output connected to pin 10 E Serial data line Serial data ine SDA El H 1 14 V IV Sync 15 ron coats clock line SCL RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor and its components Front View file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 8 of 9 6 25 2003 10 03 56 AM 107P Product Information Rear View RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 9 of 9 6 25 2003 10 03 56 AM Installing your Monitor Installing your Monitor Front View Rear View 6G3B11 Multimedia Base option PCUH411 USB Hub option Front View Power button switches your monitor on OK button which when pressed will take you
66. gh the power LED is green e Verify the Contrast and Brightness setting of the monitor First press and hold the 5 button to increase Contrast and then press and hold the 4 button to increase Brightness These buttons are located on the front of your monitor e Press both the 5 button and the OK button at the same time to switch input A B e ry and repeat step 48 above 50 Why does the picture disappear after press the on off button quickly This is a unique Philips feature designed to preserve the life of your monitor Please allow 5 seconds between powering off and on your monitor your picture will then be restored file D EDFU crt_17 edoc english FAQ HTM 12 of 12 6 25 2003 10 03 57 AM Glossary Glossary ABCDEFGHIJKLMNOPQRSTUVWXYZ A Autoscan A microprocessor based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card An autoscan monitor can thus operate with a wide range of video cards MultiSync a registered trademark of NEC provides a similar function RETURN TO TOP OF THE PAGE Balanced pincushion See Geometric distortion BNC connection A special construction of connector used in some monitors with higher horizontal scanning frequency The BNC connection can provide the optimum shielding and matching characteristic impedance of video signal path to ensure the best video perf
67. hat LightFrame is developed to enhance your photos and videos and not really for text or synthetic pictures You can decrease this effect by lowering the sharpness setting in the LightFrame 3 control panel Q How tell if my monitor comes with LightFrame 3 A All Philips LightFrame 3 monitors display this logo on their front bezel file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 4 of 9 6 25 2003 10 03 56 AM 107P Product Information ightFrame 3 How do I use the LightFrame 3 control bar that appears at the top my screen A The control bar is another upgrade that helps you run all LightFrame 3 s neat new features The illustration below describes the tasks each button performs Accustomed to working with the original LightFrame tray icon No problem It still there and can be used to turn LightFrame on or off and check LightFrame status RETURN TO TOP OF THE PAGE Technical Specifications CRT Size and deflection 17 inch 41 cm 90 deflection angle Grille pitch 0 25 mm Tube type Aperture grille flat high contrast high brightness anti glare anti static anti reflection light transmission 3896 Phosphor 22 file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 5 of 9 6 25 2003 10 03 56 AM 107P Product Information Recommended display area 12 0 x 9 0 306 x 230 mm Maximum display area 12 8 x 9 6 325 x 244 mm SCANNING
68. hen Gr nden wird empfohlen die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden schlechte Lesbarkeit und erh hte Augenbelastung bei zu geringem Zeichenkontrast w ren die Folge Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 betr gt 70dB A oder weniger ACHTUNG BEIM AUFSTELLEN DIESES GER TES DARAUF ACHTEN DAB NETZSTECKER UND NETZKABELANSCHLUB LEICHT ZUGANGLICH SIND RETURN TO TOP OF THE PAGE End of Life Disposal Your new monitor contains materials that can be recycled and reused Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer RETURN TO TOP OF THE PAGE Information for UK only WARNING THIS APPLIANCE MUST BE EARTHED Important This apparatus is supplied with an approved moulded 13A plug To change a fuse in this type of plug proceed as follows 1 Remove fuse cover and fuse 2 Fit new fuse which should be a BS 1362 5A A S T A or BSI approved type 3 Refit the fuse cover If the fitted plug is not suitable for your socket outlets it should be cut off and an appropriate 3 pin plug fitted in its place If the mains plug contains a fuse this should file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 12 of 13 6 25 2003 10 09 45 AM Regulatory Inform
69. igh doses The relevant TCO 95 TCO 99 requirement states that batteries the color generating layers of display screens and the electrical or electronics components must not contain any cadmium Mercury Mercury is sometimes found in batteries relays and switches It damages the nervous system and is toxic in high doses The relevant TCO 95 TCO 99 requirement states that batteries may not contain any mercury It also demands that mercury is not present in any of the electrical or electronics components associated with the labeled unit CFCs freons The relevant TCO 95 TCO 99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product CFCs freons are sometimes used for washing printed circuit boards CFCs break down ozone and thereby damage the ozone layer in the stratosphere causing increased reception on earth of ultraviolet light with increased risks e g skin cancer malignant melanoma as a consequence Lead Lead can be found in picture tubes display screens solders and capacitors Lead damages the nervous system and in higher doses causes lead poisoning The relevant TCO 95 TCO 99 requirement permits the inclusion of lead since no replacement has yet been developed Bio accumulative is defined as substances which accumulate within living organisms Lead Cadmium and Mercury are heavy metals which are bio accumulative RETURN TO TOP OF THE PAGE TCO 03 Informati
70. ion The cross indicates that you move into an area where you cannot make a selection Q Can l use LightFrame with Netscape A You can use LightFrame with Netscape but its functions are limited to manually highlighting the entire Netscape client window Since LightFrame is specifically designed for bright high contrast photo and video display highlighting an entire Web page including text is not recommended For best results we recommend you use LightFrame M with Microsoft Internet Explorer version 5 0 or higher You can downloaded Internet Explorer free of charge from the Microsoft website www microsoft com A copy of Internet Explorer 5 5 is also included on the CD ROM shipped with your monitor Q Can l activate LightFrame on my entire screen A Yes you can And with LightFrame 3 this becomes even easier There are three ways to do this 1 click the full screen button in the LightFrame control bar with your mouse 2 Press the windows hotkey on your keyboard and press L 3 Via the OSD menu scroll to Extra controls press OK then LightFrame On Q When apply LightFrame to a text document I get blurry characters what is wrong A Nothing is wrong The effect which you see is due to the sharpness enhancement that LightFrame is doing on your monitor This sharpness improves a photo or video significantly however on black text on a light background the effect is less favorable Please keep in mind t
71. just Horizontal Adjust Vertical Adjust Shape Adjust Color Reset to Factory Settings Extra Controls Close Main Controls BRIGHTNESS To adjust your screen s brightness follow the steps below Brightness is the overall intensity of the light coming from the screen A 50 brightness is recommended 1 Press the 4 button on the monitor The BRIGHTNESS window appears BRIGHTNESS 2 Press the 4 or F button to adjust the brightness 3 When the brightness is adjusted to the level desired stop pressing the 4 orm button and after three seconds the BRIGHTNESS window will disappear with the new adjustment saved A After the BRIGHTNESS window has disappeared to continue to the CONTRAST Window follow the steps under CONTRAST Help RETURN TO TOP OF THE PAGE CONTRAST To adjust your screen s contrast follow the steps bellow Contrast is the difference between the light and dark areas on the screen A 10096 contrast is recommended file D EDFU crt_17 edoc english OSD osd_cont htm 1 of 25 6 25 2008 10 10 05 AM The OSD Controls 1 Press the A or P button on the monitor The CONTRAST window appears CONTRAST 2 Press the A or w button to adjust the contrast 3 When the contrast is adjusted to the level desired stop pressing the A or v button and after three seconds the CONTRAST window will disappear with the new adjustment saved A After the CONTRAST window ha
72. kowania zawarty w PIN U3 T 42107 1 PN BO E 06251 Pozostale instrukcje bezpieczenstwa Nic usywa wryczek sdapterowssch lub usuwa kolka obwodu ochronnego z wtyczki Jebel konseczne jest usyeie pesedlazacza bo nale przediusacza 3 zvlewega Z piawidlaseo preewodee oclo Sysbem konmpulerowy nale y zabezpieczy praed nag ymi chwilowymi wrostami lub spad kami napeect UZ c climinalora przepiec urzadzenia doepasawujacegi luh zasilania Nale y upewnid sig aby nic nie be alo na kablach systema koitin cgn araz aby kable nie byly umieszczone w milejscu gdzie moana byloby na nie nadepbwae lub ale o ide Nip rozlewa napokra aimi inel kormpulberawey Nie nale y wpycha da abeorow system kbrmputerbwega piyi moe La spowodowac podar lub porazenic pridem paprzez zwarcie elementa wewnetrznych Syston kospaterowy znapdewac sig z dala ed grzejnik w 1 zrede ciepla Parade mie nale y blakcswac abwordw wentylacyjnych Nalezy unikat kladzenza luznych panser pod kom puber or umieszczania kompura w qmiejscu bes mazbiwasci cyrkulacji piwi eza wokol nies RETURN TO TOP OF THE PAGE North Europe Information Nordic Countries Placering Ventilation VARNING FORSAKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG AR LATATKOMLIGA NAR DU STALLER DIN UTRUSTNING PAPLATS Placeri
73. lution The number of pixels that can be displayed on the screen The resolution is specified as the number of pixels in a line multiplied by the number of horizontal lines See also video graphic adapter Rotation function The feature that allows users to adjust the whole screen rotating to be horizontal Because of the magnetic field of earth the screen of monitor will be tilt when the screen faces toward the different direction RETURN TO TOP OF THE PAGE S Screen coatings file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 11 of 18 6 25 2003 10 03 58 AM Glossary standard tube F screen E 0 5 2 discharge time minutes Anti Static coatings Due to bombardment by beam electrons monitor screens become electrically charged when in use Electrically charged screens surfaces can attract dust particles An Anti Static coating is a conductive coating deposited on the screen or on a glass panel immediately in front of the screen that conducts away the charge and prevents screen dust build up AGAS Anti Glare Anti Static coating AGAS is a silica coating applied to the surface of the screen by a spinning and spraying process It operates by diffusing reflected light to blur images of light sources on the screen To provide anti static properties the coating is impregnated with small conductive particles ARAS Anti Reflection Anti Static coating ARAS is one of the most effective anti reflec
74. me M 1 or 2 software with a Philips LightFrame 3 monitor nothing will happen Q Can use LightFrame 3 software on my LightFrame 1 2 monitor A No for a LightFrame 1 or 2 monitor you need to use LightFrame 1 or 2 software It is however file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 2 of 9 6 25 2003 10 03 56 AM 107P Product Information possible to use the LightFrame 2 software on a LightFrame 1 monitor Q What is the difference between LightFrame 1 LightFrame 2 and LightFrame 3 A LightFrame 1 was the very first generation of the LightFrame feature introduced by Philips In that version the user needs to manually turn on off the feature and select the window or area to apply it to LightFrame 2 offers the automatic detection in Internet Explorer on top of the LightFrame 1 functions With this feature LightFrame will automatically scan a web page in Internet Explorer find the largest picture and enhance it LightFrame 3 offers everything that LightFrame M 2 has but now with the possibility to enhance multiple pictures at the same time So in a web page LightFrame will find all the pictures and enhance them simultaneously or in a photo viewing application you can enhance multiple photos at once Furthermore LightFrame 3 comes with an easy to activate full screen function This is especially handy for games and movies Just one click on the full screen button and LightF
75. modes is more expensive line number interlaced non interlaced RETURN TO TOP OF THE PAGE file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 7 of 18 6 25 2003 10 03 58 AM Glossary L Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location see figure intended raster horizontal linearity vertical linearity distortion distortion Line frequency See Horizontal scanning frequency Low emission monitor A monitor that complies with international standards on radiation See Electromagnetic radiation standards Low frequency electric and magnetic fields Alternating fields generated by the deflection yoke These are subject to increasing attention notably by governing authorities the trade and the press Although there is no scientific evidence that monitor emissions are harmful much effort has gone into reducing emissions on the principle of better safe than sorry Currently there are two areas of interest very low frequency VLF electric and magnetic fields extending from 2 kHz to 400 kHz and extreme low frequency ELF fields extending from 5 Hz to 2 kHz See also Electromagnetic radiation standards RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english GLOSSARY GLOSSARY HTM 8 of 18 6 25 2003 10 03 58 AM Glossary M Moir effect A fringe pattern arising from the interference between two superimposed line patterns In a mo
76. n each category TCO 92 Phase out June 30 2000 TCO 95 Will be end December 31 2003 Emissions MPRII Set low emission rules for visual displays TCO92 Imposed more stringent standards than MPHII TCO95 Further toughened TCO92 rules TCO99 Delineated even more severe standards and test procedures than TCO95 TCO 03 Same as TCO99 standard Testing uncertainty Safety MPRII No requirement 1CO92 95 99 03 All set requirements Energy Saving MPRII No requirement TCO92 Standby mode lt 30W Off mode lt 8W TCO95 Standby mode lt 30W Off mode lt 8W TCO99 Standby mode lt 15W Off mode lt 5W TCO 03 Standby mode lt 15W Off mode 5W file D EDFU crt 17 edoc english FAQ HTM 2 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions Visual Ergonomics MPRII No requirement TCO92 No requirement TCO95 Set ergonomic rules including minimum contrast level flicker and jitter TCO99 Tightened TCO95 rules TCO 03 Tighten TCO99 rule for CRT and new requirement of screen color for TFT LCD Monitors Ecology MPRII No requirement TCO92 No requirement TCO95 Set general ecological standards including recycling preparation environmental policy and environmental certification TCO99 Further tightened TCO95 norms TCO 03 Require the recycling information to users 10 How dol enable the energy saving function Go to My Computer and select Control Panel followed by Monitor Contr
77. ng Ventilation ADVARSEL S RG VED PLACERINGEN FOR AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGAENGELIGE file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 10 of 13 6 25 2003 10 09 45 AM Regulatory Information Paikka IImankierto VAROITUS SIJOITA LAITE SITEN ETTA VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA Plassering Ventilasjon ADVARSEL NAR DETTE UTSTYRET PLASSERES MA DU PASSE PA AT KONTAKTENE FOR STOMTILFORSEL ER LETTE A NA RETURN TO TOP OF THE PAGE BSMI Notice Taiwan Only RETURN TO OF THE PAGE Ergonomie Hinweis nur Deutschland Der von uns gelieferte Farbmonitor entspricht den in der Verordnung ber den Schutz vor Sch den durch R ntgenstrahlen festgelegten Vorschriften Auf der R ckwand des Ger tes befindet sich ein Aufkleber der auf die Unbedenklichkeit der Inbetriebnahme hinweist da die Vorschriften ber die Bauart von St rstrahlern nach Anlage III 5 Abs 4 der R ntgenverordnung erf llt sind Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht ist darauf zu achten da Reparaturen nur durch Fachpersonal durchgef hrt werden 2 nur original Ersatzteile verwendet werden 3 bei Ersatz der Bildr hre nur eine bauartgleiche eingebaut wird file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 11 of 13 6 25 2003 10 09 45 AM Regulatory Information Aus ergonomisc
78. nitor it comes from the interference between the shadow mask pattern and the video information video moir and between the shadow mask pattern and the horizontal line pattern scan moir It shows itself as wavy patterns on the screen and becomes more noticeable as monitor resolution increases Since the video signal varies continuously little can be done about video moir Scan moir depends on the horizontal scanning frequency and can be alleviated by appropriate choice of frequency Autoscan MultiSync monitors which operate over a range of scanning frequencies may sometimes exhibit moir in certain video modes MPR See Electromagnetic radiation standards MultiSync monitor See Autoscan monitor RETURN TO TOP OF THE PAGE N Non interlaced See Interlaced non interlaced RETURN TO TOP OF THE PAGE OSD On Screen Display The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on screen instruction window See CustoMax in CrystalClear section Overscan The practice in which areas without useful video information are scanned outside the visible screen area in order to make maximum use of the screen for display of active video information This practice is occasionally necessary because some video cards generate a video pattern that is smaller than the visible file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 9 of 18 6 25 2003 10 03 58 AM Glossar
79. ntal line frequencies up to 90 kHz and bandwidths up to 200 MHz VIS Viewable Image Size The real screen dimensions that users can see measured diagonally The VIS of a monitor is always less than the so called screen size of a monitor For example the VIS of a 17 inch monitor is only about 16 inches It depends on the useful screen size of CRT and the opening of a monitor s front cabinet RETURN TO TOP OF THE PAGE file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 18 of 18 6 25 2003 10 03 58 AM Download and Print Download and Print This page provides an option to read the manual in pdf format PDF files can be downloaded into your hard disk then viewed and printed with Acrobat Reader or through your browser If you do not have Adobe Acrobat Reader installed click on the link to install the application Adobe Acrobat Reader for PC Adobe Acrobat Reader for Mac Download instructions To download the file 1 Click and hold your mouse over the icon below Win95 98 users right click 2 From the menu that appears choose Save Link As Save Target As or Download Link to Disk 3 Choose where you would like to save the image click Save if prompted to save as either text or source choose source Printing instructions To print the manual 1 With the manual file open follow your printer s instructions and print the pages you need pa 107B pdf English language manual FOF i pa
80. nterference The electrical and or magnetic radiation coming from the working electrical or electronic equipment EMS Electrical Magnetic Sustainment The ability of electrical or electronic equipment to function properly in the environment with electrical and or magnetic interference RETURN TO TOP OF THE PAGE F Flicker Very rapid variations in picture intensity caused by the finite time required for the electron beam to scan a picture onto the screen Two kinds of flicker occur line flicker caused by the electron beam scanning in each line of the picture and frame flicker or field flicker if the picture is interlaced caused by the frame repetition rate of 50 frames second Frame flicker is noticeable with GUI and DTP software which have a light background and can be very disturbing especially for those who work regularly with displays contributing to eye strain headaches visual blurring stress etc The problem can however be eliminated by increasing the refresh rate number of frames second of the monitor to a value above around 70 Hz Sensitivity to flicker appears to diminish with increasing age RETURN TO TOP OF THE PAGE H Hertz The unit of frequency named after the physicist Heinrich Hertz 1857 1894 1 hertz Hz is equal to 1 cycle second Horizontal dot pitch See Dot pitch Horizontal scanning frequency file D EDFU crt_17 edoc english GLOSSARY GLOSSARY HTM 6 of 18 6 25 2003 10 03 58 AM
81. nty will not apply if it appears during the repair process that the reported failure is caused by improper handling or accidents the monitor is not defective and is within the specification the monitor has been altered or repaired by non authorised persons If warranty claims are determined to be invalid Philips may invoice the customer for all related repair verification and transportation costs Just a phone call away Philips customer help desks are located worldwide You can contact Philips Monday Friday from 08 00 20 00 hrs Central European Time CET and on Saturdays and Sundays from 10 00 to 18 00 hrs CET by using one of the toll free numbers Click here to access the First Choice Contact Information Or you can reach us via Website http www philips com file D EDFU crt_17 edoc english WARRANTY 7sxWAR_USA HTM 3 of 3 6 25 2003 10 10 11 AM United States Guarantee LIMITED WARRANTY Computer Monitor Click here to access the Warranty Registration Card Three Years Free Labor Three Years Free Service on Parts One Year Exchange Product will be exchanged with a new or renewed to original specifications unit within two business days for the first year This product must be shipped in at your expense for service during years two and three WHO IS COVERED You must have proof of purchase to receive warranty service A sales receipt or other document showing that you purchased the product is considered pr
82. o windows Multimedia Base and USB Hub option sRGB for true on screen color representation FCC CE in selected countries only and 1509241 15014001 certified RETURN TO TOP OF THE PAGE LightFrame for Windows Introduction Philips LightFrame M feature enriches the experience of pictures and video on a Philips CRT picture tube monitor LightFrame will boost the brightness and sharpness of photos and videos on the monitor screen To control the LightFrame feature in your monitor you have to install the LightFrame application which you will find on this CD ROM Note Philips LightFrame will only work with monitors that have been built to use this software Earlier Philips monitors or other manufacturers monitors will not work with this special software It is recommended that you install this software only on a Philips monitor designed to use it These monitors can be identified by the LightFrame logo on the front of the monitor This software is not designed for use with LCD flat screen monitors LightFrame will work with true Windows based programs and DOS based programs that operate in Windows environment It will not work with DOS based programs operating only in a DOS environment Language Selection While English is the default language of LightFrame the User Interface can be set up to operate in Dutch file D EDFU crt_17 edoc english 107P PRODUCT PRODUCT HTM 1 of 9 6 25 2003 10 03 56 AM 10
83. of installation Should you encounter any difficulties while installing or using this product please contact Philips directly to benefit from your Philips F1rst Choice Warranty This three year service warranty entitles you to a swap model on site within 48 hours of your call being received within the first year of purchase If you have any problems with your monitor within the second or third year of purchase we will repair it after it has been sent to the service provider at your expense and returned to you within five working days free of charge An extended warranty called Philips F1rst Choice Premium is available in addition to your Philips First Choice warranty For more details contact your Philips dealer Before contacting Philips please prepare the following details so we can solve your problem quickly e Philips type number e Philips serial number e Purchase date copy of purchase may be required e PC environment Processor O 286 386 486 Pentium Pro Internal memory O Operating system Windows DOS OS 2 MAC o Fax Modem Internet program e Other cards installed Having the following information available will also help speed up the process e Your proof of purchase indicating date of purchase dealer name model and product serial number e The full address to which the swap model should be delivered Just a phone call away Philips customer help desks are located worldwide You can contact Philips Monday Friday from 08 00
84. ol Select All default selection and choose your Philips monitor model from the default driver list Plug and Play will automatically enable the EPA tick box for you In DOS or Windows 3 1 you must first make sure your PC supports power saving 11 What is refresh rate Refresh rate describes the number of times an entire screen is vertically scanned each second In other words If a monitor s refresh rate is 85 Hz its screen is refreshed or vertically scanned 85 times per second A higher the refresh rate means better image stability and less flicker A high refresh rate helps users who work long hours in front of a monitor avoid eye fatigue and stress To change the refresh rate go into Start Settings Control Pannel Display Properties Setting Advance Adaptor Windows settings of the computer the monitor will automatically adjust itself to the video card file D EDFU crt_17 edoc english FAQ HTM 3 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions 12 Why does the picture on the screen appear to flicker A low refresh rate or electrical interference typically causes flickering in the picture Possible solutions include the following e Verify that the proper drivers are installed for your video card e Make sure that all electrical devices such as mobile phones are at least 1m from the monitor e Place the monitor in another physical location away from electrical interference e Adjust the refresh rate to 75hz
85. on T0Development Congratulations The display you have just purchased carries the TCO 03 Ith Displays label This means that your display is designed manufactured and tested according to some of the strictest quality and environmental requirements in the world This DISPLAYS makes for a high performance product designed with the me user in focus that also minimizes the impact on our natural file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 3 of 13 6 25 2003 10 09 45 AM Regulatory Information Some of the features of the TCO 03 Display requirements Ergonomics e Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems Important parameters are luminance contrast resolution reflectance colour rendition and image stability Energy e Energy saving mode after a certain time beneficial both for the user and the environment e Electrical safety Emissions e Electromagnetic fields e Noise emissions Ecology e The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 000 e Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium mercury and lead The requirements included in this label have been developed by TCO Development in co operation with scientists experts use
86. oof of purchase Attach it to this owner s manual and keep both nearby WHAT IS COVERED Warranty coverage begins the day you buy your product For three years thereafter all parts will be repaired or replaced and labor is free After three years from the day of purchase you pay for the replacement or repair of all parts and for all labor charges All parts including repaired and replaced parts are covered only for the original warranty period When the warranty on the original product expires the warranty on all replaced and repaired products and parts also expires WHAT IS EXCLUDED Your warranty does not cover e labor charges for installation or setup of the product adjustment of customer controls on the product and installation or repair of antenna systems outside of the product e product repair and or part replacement because of misuse accident unauthorized repair or other cause not within the control of Philips Consumer Electronics e reception problems caused by signal conditions or cable or antenna systems outside the unit e a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products damaged by these modifications e incidental or consequential damages resulting from the product Some states do not allow the exclusion of incidental or consequential damages so the above ex
87. or higher 13 How dol adjust my monitor s resolution Available resolutions are determined by the capabilities of your video card and graphic driver Under Windows 95 you may select the desired available resolution through the Display properties Settings menu 14 How can adjust the size position and rotation of my screen Depending on the model you own you can use your CustoMax Software On Screen Display OSD or control knobs located on the monitor 15 What if get lost when making monitor adjustments Simply press OK button then select Reset to factory settings to restore all settings 16 What is LightFrame LightFrame is a Philips technology breakthrough which offers a unique and revolutionary solution for boosting a monitor s brightness and sharpness With LightFrame the user experiences TV quality performance for video or photos without deterioration to the monitor s performance in windows used for other applications 17 How does LightFrame work file D EDFU crt_17 edoc english FAQ HTM 4 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions LightFrame consists of a software application and an Integrated Circuit IC embedded in the monitor Together they boost brightness and sharpness in a user defined window or screen area Unique LightFrame technology dramatically improves photo and video display quality 18 Why is LightFrame important to me With LightFrame selecte
88. ormance PRE Ew RETURN TO TOP OF THE PAGE file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 1 of 18 6 25 2003 10 03 58 AM Glossary C CE Mark CE mark is displayed on products per EMC and LV low Voltage Device directives in compliance with European Community safety EMI and EMS requirements and is compulsory on products for sale in the European Community Color temperature A way of describing the color of a radiating source in terms of the temperature in degrees Kelvin of a black body radiating with the same dominant frequency as the source Most Philips monitors offer the possibility of setting the color temperature to any desired value Contrast The ratio between the brightness of the brightest and darkest parts of a picture The darkest part of a picture is set by the brightness of the unexcited phosphor which is governed by the degree with which ambient light is reflected Contrast is therefore reduced in conditions of high ambient light levels Black Matrix tubes reflect less ambient light so exhibit higher contrast than other tubes Convergence error Bean misalignment causing one or more of the three beams passing through the wrong aperture in the shadow mask and striking a phosphor dot in the wrong triad Convergence error is expressed in mm often at three well defined points on the screen designated A B and C see figure Also known as misconvergence file D EDFU crt_17 edoc english
89. otitade uvedeno ze spad do do tidy A podle EN 55022 spada automaticky do tidy B podia 55022 Pro zafizeni zalazen do tidy A chrann p smo 3m podle EN 55022 plati n amp sledujici Dojde li k ru eni teleknrnunikainich nebo pnych zafizeni je uzivatel povinnen prov st takov aby ruseni odstranil RETURN TO TOP OF THE PAGE VCCI Notice Japan Only This is a Class B product based on the standard of the Voluntary Control Council for Interference VCCI for Information technology equipment If this equipment is used near a radio or television receiver in a domestic environment it may cause radio Interference Install and use the equipment according to the instruction manual gir TERRE ERMA VOC Xx dore Tore Class B ITE E JE SIR ER AD RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 8 of 13 6 25 2003 10 09 45 AM Regulatory Information MIC Notice South Korea Only Class B Device uai en DU e He puo wap ATER 6 AAE RE rE ASA Qe MIC Please note that this device has been approved for non business purposes and may be used in any environment including residential areas RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit a three prong socket All equipment that works together
90. r SJT three conductor cord a maximum of 15 feet long and a parallel blade grounding type attachment plug rated 15 A 125 V For units set at 230 V Use a UL Listed Cord Set consisting of a minimum 18 AWG Type SVT or SJT three conductor cord a maximum of 15 feet long and a tandem blade grounding type attachment plug rated 15 A 250 V Information for Users outside the U S For units set at 230 V Use a Cord Set rated minimum 5 A 250 V for units set at 230V or 10A 125V for units set at 115V The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english 107P SAFETY saf_other htm 6 25 2003 10 09 45 AM 6G3B11 Multimedia Base option 6G3B11 Multimedia Base option Front View Rear View Technical Specifications Description of the Controls Installing your Multimedia Base Power adapter Installation Technical Specifications Output power e Bass Boost Headphone connection e Microphone in out Includes Dimension Power consumption Description of the Controls 2 x 1 5W RMS 3eW PMPO 3 5 mm jack 3 5 mm jack Audio cable and AC adapter 9 4 x 2 1 x 8 2 239 x 54 x 208 mm 5W RETURN TO TOP OF THE PAGE A Bass button Turn on or off to enhance the Bass sound B Power knob Volume knob If the picture has wavy patterns when playing audio red
91. r decreases the size of the images on your screen To adjust the ZOOM follow the steps below 1 Press the B button on the monitor The MAIN CONTROLS window appears 2 Press the GF button until ZOOM is highlighted MAIN CONTROLS LANGUAGE ADJUST ADJUST ADJUST ADJUST HORIZONTAL VERTICAL SHAPE COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS MOVE SELECTION THEN fk Back TO CONTROLS 4 Press the button to adjust ZOOM file D EDFU crt_17 edoc english OSD osd_cont htm 4 of 25 6 25 2008 10 10 05 AM The OSD Controls 5 Press the 89 button to confirm your selection and return to the MAIN CONTROLS window CLOSE MAIN CONTROLS will be highlighted After returning to MAIN CONTROLS A Smart c 19 continue to ADJUST HORIZONTAL press the button until ADJUST Help HORIZONTAL is highlighted Next follow steps 3 7 under ADJUST HORIZONTAL to exit completely press the 89 button RETURN TO TOP OF THE PAGE ADJUST HORIZONTAL ADJUST POSITION under ADJUST HORIZONTAL shifts the image on your screen either to the left or right Use this feature if your image does not appear centered ADJUST SIZE under ADJUST HORIZONTAL expands or controls the image on your screen pushing it out toward the left and right sides or pulling it in toward the center 1 Press the 89 button on the monitor The MAIN CONTROLS window appears 2 Press the GF button until ADJUST HORIZ
92. rame enhances your total monitor Q Can upgrade my current Philips monitor to LightFrame 3 A No For LightFrame Philips developed special hardware which is build into the monitor Therefore upgrading from LightFrame 1 or 2 to 3 is not possible It is however possible to upgrade your LightFrame 1 monitor to LightFrame 2 by installing the LightFrame 2 software Q Can install LightFrame 3 over an older version A When you install LightFrame 3 the setup wizard will scan your system to check if you have an older version installed If so the setup wizard will remove that version before continuing with the installation of the new version Please be aware that for LightFrame 3 you also need a monitor which is capable of running the LightFrame 3 feature Q How can tell which version LightFrame my monitor can support A To check which version of LightFrame is supported by your monitor check the LightFrame logo which you will find on the top right hand corner of the monitor If this logo has a small 3 in it your monitor is ready for LightFrame 3 Otherwise you should use the LightFrame 1 or 2 software How many windows can I enhance at the same time A In LightFrame 3 it is possible to enhance up to 8 windows at the same time It is however important to understand that when other windows toolbars or menus overlap the enhanced windows the maximum number of enhanced windows can be less
93. re Conservation and Statens Energimyndighet The Swedish National Energy Administration Approval requirements cover a wide range of issues environment ergonomics usability emission of electric and magnetic fields energy consumption and electrical and fire safety The environmental demands impose restrictions on the presence and use of heavy metals brominated and chlorinated flame retardants CFCs freons and chlorinated solvents among other things The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy The energy requirements include a demand that the computer and or display after a certain period of inactivity shall reduce its power consumption to a lower level in one or more stages The length of time to reactivate the computer shall be reasonable for the user Labeled products must meet strict environmental demands for example in respect of the reduction of electric and magnetic fields physical and visual ergonomics and good usability Below you will find a brief summary of the environmental requirements met by this product The complete environmental criteria document may be ordered from TCO Development SE 114 94 Stockholm Sweden Fax 46 8 782 92 07 Email Internet development 2 tco se Current information regarding TCO 95 TCO 99 approved and labeled products may also be o
94. rizontal moire is adjusted press the button to highlight VERTICAL ADJUST MOIRE HORIZONTAL 7 m 8 7 al ie NI 5o K BACK TO EXTRA CONTROLS 7 To adjust the vertical moire press the 4 orm button 8 When the vertical moire is adjusted press the 3 button to return to the EXTRA CONTROLS window BACK TO MAIN CONTROLS will be highlighted A After returning to MAIN CONTROLS Smart Help lo exit completely press the B button Turn on LightFrame Not available in all models EXTRA CONTROLS is a set of three features including LIGHTFRAME This feature allows the user to turn file D EDFU crt_17 edoc english OSD osd_cont htm 22 of 25 6 25 2003 10 10 06 AM The OSD Controls on the LIGHTFRAME function to activate in full screen mode 1 Press B button on the monitor The MAIN CONTROLS window appears 2 Press the button until EXTRA CONTROLS is highlight MAIN CONTROLS LANGUAGE eOOM ADJUST HORT2Z0NTAL ADJUST VERTICAL ADJUST SHAPE ADJUST COLOR RESET TO FACTORY SETTINGS CLOSE MAIN CONTROLS MOVE SELECTION THEN amp l 3 Press the B button The EXTRA CONTROLS window appears ADJUST MOIRE will be highlighted 4 Press the v button until LIGHTFRAME is highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 23 of 25 6 25 2003 10 10 06 AM The OSD Controls EXTRA CONTROLS CH ADJUST MOIR JS DEGAUSS BACK TO MAIN CONTROLS MOVE SELECT
95. rom o monitor as far as possible at least 50 cm to avoid cansing unstable monitor picture file D EDFU crt 17 edoc english INSTALL 2 mm pede mm inst htm 3 of 4 6 25 2003 10 09 58 AM 6G3B11 Multimedia Base option A For T connector RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english INSTALL_2 mm_pede mm_inst htm 4 of 4 6 25 2003 10 09 58 AM USB Hub Optional Feature PCUH411 USB Hub Option Front View Rear View Installing your USB Hub Installing your USB Hub Installing on a conventional base 1 Take out the USB hub from the box 2 Take off the USB hub cover 3 Slightly tilt and lift the base of your monitor 4 Attach the USB hub by clipping into the base 5 You can reposition the USB hub along the base to suit your needs Installing on the Multimedia base Follow Steps 1 and 2 above 6 Position the USB hub to the back file D EDFU crt_17 edoc english INSTALL_2 usbhub usb_inst htm 1 of 2 6 25 2003 10 09 58 AM USB Hub Optional Feature RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english INSTALL_2 usbhub usb_inst htm 2 of 2 6 25 2003 10 09 58 AM of the Multimedia Pedestal Attach the USB hub by sliding in to the Multimedia base The OSD Controls The OSD Controls Description of the On Screen Display The OSD Tree The OSD Controls Brightness HotKey Contrast HotKey Language Zoom Ad
96. rs In many countries environmental labeling has become an established method for encouraging the adaptation of goods and services to the environment The main problem as far as computers and other electronics equipment are concerned is that environmentally harmful substances are used both in the products and during their manufacture Since it is not so far possible to satisfactorily recycle the majority of electronics equipment most of these potentially damaging substances sooner or later enter nature There are also other characteristics of a computer such as energy consumption levels that are important from the viewpoints of both the work internal and natural external environments Since all methods of electricity generation have a negative effect on the environment e g acidic and climate influencing emissions radioactive waste it is vital to save energy Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy What does labeling involve This product meets the requirements for the TCO 95 TCO 99 scheme which provides for international and environmental labeling of personal computers The labeling scheme was developed as a joint effort by the file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 1 of 13 6 25 2003 10 09 45 AM Regulatory Information TCO The Swedish Confederation of Professional Employees Svenska Naturskyddsforeningen The Swedish Society for Natu
97. rs as well as manufacturers all over the world Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user friendly direction Our labelling system started with displays in 1992 and is now requested by users and IT manufacturers all over the world For more information please visit www tcodevelopment com RETURN TO TOP OF THE PAGE Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization s product service and activities From the planning design and production stages Philips emphasizes the important of making products that can easily be recycled At Philips end of life management primarily entails participation in national take back initiatives and recycling programs whenever possible preferably in cooperation with competitors file D EDFU crt_17 edoc english 107P SAFETY regs regulat htm 4 of 13 6 25 2003 10 09 45 AM Regulatory Information There is currently a system of recycling up and running in the European countries such as The Netherlands Belgium Norway Sweden and Denmark In U S A Philips Consumer Electronics North America has contributed funds for the Electronic Industries Alliance EIA Electronics Recycling Project and state recycling initiatives for end of life electronics products from household sources In addition the Northeast Recycling Council NERC
98. rt 17 edoc english FAQ HTM 5 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions 22 What will happen when my system is no longer connected to a LightFrame enabled monitor for example when I take my notebook on the road Philips exclusive LightFrame feature requires the combined operation of hardware that resides in your monitor and software installed on your system It only works when a monitor with built in hardware receives commands from system software Without both the LightFrame M hardware equipped monitor and system software the LightFrame does not function 23 What is XtraSpace Design XSD XSD stands for XtraSpace Design a Philips breakthrough that reduces a CHT display device s footprint Philips XSD monitors combine the world s smallest front to back footprint with excellent front of screen performance 24 How did Philips achieve XtraSpace Design Philips achieved this breakthrough in reduced footprint CRT display devices through short depth tubes and a focused design process that squeezed every excess millimeter out of XSD monitor desk space requirements 25 What is Philips monitors solution for audio Not all users need multimedia capabilities To give users freedom of choice Philips provides an optional Multimedia Base type number 6G3B10 The Multimedia Base replaces the easily removable standard pedestal of the monitor 26 Which models can be incorporated with the Multimedia Base file
99. s disappeared to continue to the MAIN CONTROLS Cart follow the steps under LANGUAGE Help RETURN TO TOP OF THE PAGE LANGUAGE The ON SCREEN DISPLAY shows its settings in one of eight languages The default is English but you can select French Spanish German Italian Simplify Chinese Korea or Brazilian Portuguese 1 Press the B button on the monitor The MAIN CONTROLS window appears LANGUAGE should be highlighted 2 Press the 69 button again The LANGUAGE window appears file D EDFU crt_17 edoc english OSD osd_cont htm 2 of 25 6 25 2008 10 10 05 AM The OSD Controls MAIN CONTROLS eOOM ADJUST HORIZONTAL ADJUST VERTICAL ADJUST SHAPE ADJUST COLOR RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS MOVE SELECTION THEN w LANGUAGE FRANCAIS DEUTSCH ITALIAN PORTUGUES apo QE MOVE SELECTION THEN X BACK TO MAIN CONTROLS 4 Press the 89 button to confirm your selection and return to MAIN CONTROLS window CLOSE MAIN CONTROLS will be highlighted After returning to MAIN CONTROLS A to continue to INPUT SIGNAL SELECTION press the button until INPUT smart SIGNAL SELECTION is highlighted Next follow steps 3 5 under INPUT SIGNAL Help SELECTION to exit completely press the 89 button file D EDFU crt_17 edoc english OSD osd_cont htm 3 of 25 6 25 2008 10 10 05 AM The OSD Controls ZOOM RETURN TO TOP OF THE PAGE ZOOM increases o
100. specific monitor size e Change Window viewing pattern scheme to a pattern where the Moire is less visible e Change horizontal and vertical size to optimize the reduction of the Moire effect 39 What is CustoMax CustoMax is proprietary Philips software that allows user to control parameter e g Size Color Geometry in place of the buttons on the front of the monitor To install and run the CustoMax software you must have a USB compatible system and have a USB connection at the rear of your monitor 40 My monitor appears to be missing one or more colors How do correct this If the OSD menu is also missing a color please contact service for details Set color temperature to 9300 color coordination Check the video cable for any bent pins Video card could be defective try the monitor with another computer 41 When I degauss my monitor it makes a loud noise Is this normal file D EDFU crt_17 edoc english FAQ HTM 9 of 12 6 25 2003 10 03 57 AM Frequently Asked Questions Yes when degaussing your monitor via the OSD it is normal for the monitor to make a relatively loud noise Please be aware that many models will not degauss more than once within any given time period up to 10 minutes This is due to the unit having a temperature sensitive resistor While the unit is degaussing the resistor increases in value with heat and once it reaches a certain temperature the resistance will rise and prevent voltage from reachin
101. tails e Refer to the Adjust Shape item in On Screen Display chapter for details e Remove any nearby magnetic objects e Degauss your monitor Refer to the Degauss item in On Screen Display chapter for details e Face the monitor toward the East for the best picture quality e Make sure the monitor cable is properly connected to your computer e Degauss your monitor Refer to the Degauss item in On Screen Display chapter for details e Check to see if the monitor cable has bent pins e Check the Color Temperature Refer to the Color Temperature item in On Screen Display chapter for details e Make sure the Brightness and Contrast controls are set correctly e Degauss your monitor Refer to the Degauss item in On Screen Display chapter for details e Eliminate the use of extension cables and or video switch box e Adjust Moire to zero Refer to the Adjust Moire item in On Screen Display chapter for details e Low down the Contrast and or Brightness level e Adjust Moire to zero Refer to the Adjust Moire item in On Screen Display chapter for details e Degauss your monitor Refer to the Degauss item in On Screen Display chapter for details e Increase the refresh rate of video signal at least to 75Hz Refer to the Quick Start Guide or contact your computer vender for details e Adjust Moire to zero Refer to the Adjust Moire item in On Screen Display chapter for details For further assistan
102. th step 3 under EXTRA CONTROLS Help to exit completely press the B button RETURN TO TOP OF THE PAGE EXTRA CONTROLS DEGAUSS EXTRA CONTROLS is a set of three features including DEGAUSS Degaussing removes electromagnetic build up that may distort the color on your screen 1 Press the 69 button on the monitor The MAIN CONTROLS window appears 2 Press the button until EXTRA CONTROLS is highlighted MAIN CONTROLS LANGUAGE eOOM ADJUST HORIZONTAL ADJUST VERTICAL ADJUST SHAPE ADJUST COLOR RESET TO FACTORY SETTINGS CLOSE MAIN CONTROLS RIA MOVE SELECTION THEN RR 3 Press the 9 button The EXTRA CONTROLS window appears MOIRE will be highlighted file D EDFU crt_17 edoc english OSD osd_cont htm 19 of 25 6 25 2003 10 10 06 AM The OSD Controls 4 Press the button to highlight DEGAUSS EXTRA CONTROLS CH ADJUST MOIR S LIGHTFRAME OFF ON BACK TO MAIN CONTROLS MOVE SELECTION THEN X SERIAL NUMBER TY 123456 RESOLUTION 1024 768 1280 1024 FREQUENCY 69K 85HZ 64K 60HZ 5 To degauss your screen press the 89 button Your screen will be degaussed then the MAIN CONTROLS window will reappear CLOSE MAIN CONTROLS will be highlighted After returning to MAIN CONTROLS A to continue to ADJUST MOIRE press the button until EXTRA CONTROLS is Help highlighted Next start with step 3 under EXTRA CONTROLS ADJUST MOIRE lo exit completely press the 3 button
103. tion anti static screen treatments currently available It is composed of a multi layer structure of transparent dielectric material that suppresses specular reflections by broadband interference effects at the screen surface Anti static properties are provided by a single conductive layer within the multi layer structure With ARAS the intensity of reflected light is reduced from around 4 5 of the incident light the reflectivity of uncoated screens to less than 0 5 ARAS also has a major advantage over other screen treatments It doesn t diffuse or scatter reflected light so picture contrast and sharpness remain completely unimpaired It s also easy to clean and tough enough to withstand commercially available cleaning agents file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 12 of 18 6 25 2003 10 03 58 AM Glossary light emitted by phosphor 0 5 of incident light n layer roughened inner glass phosphor The ARAS coating reflects only about 0 5 of the incident light AGRAS Anti Glare anti Reflection Anti Static coating A combined anti reflection anti glare anti static coating Self test function A monitor equipped with hardware or software to automatically detect cable connection status Shape Deviation of a reproduced picture from its intended shape The following types of distortion are most common file D EDFU crt 17 edoc englis GLOSSARY GLOSSARY HTM 13 of 18 6 25 2003 10 03 58 AM
104. to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device To prevent damage which may result in fire or shock hazard do not expose this appliance to rain or excessive moisture THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS RETURN TO TOP OF THE PAGE Commission Federale de la Communication FCC Declaration Cet quipement a t test et d clar conforme auxlimites des appareils num riques de class B aux termes de l article 15 Des r gles de la FCC Ces limites sont con ues de facon fourir une protection raisonnable contre les interf rences nuisibles dans le cadre d une A installation r sidentielle CET appareil produit utilise et peut mettre des hyperfr quences qui si l appareil n est pas install et utilis selon les consignes donn es peuvent causer des interf rences nuisibles aux communications radio Cependant rien ne peut garantir l absence d interf rences dans le cadre d une installation particuli re Si cet appareil est la cause d interf rences nuisibles pour la r ception des signaux de radio ou de t l vision ce qui peut tre d cel
105. turning to MAIN CONTROLS A to continue to ADJUST COLOR press the button until ADJUST is Help highlighted Next start with step 3 under ADJUST COLOR and follow the directions lo exit completely press the B button twice RETURN TO TOP OF THE PAGE ADJUST COLOR Your monitor has three preset options you can choose from The first option is for GENERAL USE which is fine for most applications The second option is for IMAGE MANAGEMENT which includes projects such as file D EDFU crt 17 edoc english OSD osd cont htm 15 of 25 6 25 2003 10 10 06 AM The OSD Controls desktop publishing viewing a DVD from your DVD player or pictures on the World Wide Web and playing video games The third option is for PHOTO RETOUCH which is for working with pictures you have imported into your computer and want to alter When you select one of these options the monitor automatically adjusts itself to that option There is also a fourth option USER PRESET which allows you to adjust the colors on your screen to a setting you desire 1 Press the 3 button on the monitor The MAIN CONTROLS window appears 2 Press the button until ADJUST COLOR is highlighted MAIN CONTROLS a LANGUAGE DD 200M ADJUST HORIZONTAL ADJUST VERTICAL fl ADJUST SHAPE RESET TO FACTORY SETTINGS EXTRA CONTROLS CLOSE MAIN CONTROLS MOVE SELECTION THEN ij ADJUST COLOR 9300K FOR GENERAL USE 6500K FOR IMAGE MANAGE
106. uce the volume Turn clockwise to switch power on Turning the knob more will increase the volume C Headphone jack Attach your headphones here The loudspeakers will automatically switch off once headphones are connected file D EDFU crt_17 edoc english INSTALL_2 mm_pede mm_inst htm 1 of 4 6 25 2003 10 09 58 AM 6G3B11 Multimedia Base option D Microphone jack Attach your microphone here E Audio In Connect this to the audio output of your PC F MIC Out Connect this to the microphone output of your PC G DC Input Connect power input here RETURN TO TOP OF THE PAGE Installing your Multimedia Pedestal 1 To INSTALL e Slide the pedestal aligning with the holes on the side e Then click the back hook into the corresponding hole on the bottom plate of your monitor file D EDFU crt_17 edoc english INSTALL_2 mm_pede mm_inst htm 2 of 4 6 25 2003 10 09 58 AM 6G3B11 Multimedia Base option 2 To UN INSTALL e Lift the back hook from the hole on the bottom plate of your monitor e Slide out the pedestal the opposite direction from when you installed it RETURN TO TOP OF THE PAGE Power adapter Installation Installing the adapter There are two 2 ways of installing the adapter A T connector B Wall more connector Monitor T connector Multimedia Base DC input PC PC power cord Transformer Power outlet o ek C Please keep 9 transformer away f
107. unction performed by an entity attached to the Universal Serial Bus for example a data FAX modem device Devices may be physical electrical addressable and logical Port Port 2 d H U B Port Port H4 3 Downstream The direction of data flow from the host or away from the host A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic from the hub Downstream ports receive upstream data traffic Upstream The direction of data flow towards the host An upstream port is the port on a device electrically closest to the host that generates upstream data traffic from the hub Upstream ports receive downstream data traffic UPS Universal Power Supply The monitor with UPS feature can work in different countries with various mains voltage RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english GLOSSARY GLOSSARY HTM 16 of 18 6 25 2003 10 03 58 AM Glossary V Vertical dot pitch See Dot pitch Vertical scanning frequency Expressed in Hz this is the number of fields written to the screen every second in interlaced mode In non interlaced mode vertical scanning frequency is the number of frames complete pictures written to the screen every second also known as refresh rate Vertical sync pulses A train of square shaped waveforms that define the start of a new frame VESA Video Electronic Standards Association a consortium of manufact
108. university service BLD No 24 nan yi duan of Yi huan road 410061 Chengdu P R China Phone 800 820 5128 Toll Free Fax 21 65610647 file D EDFU crt_17 edoc english WARRANTY warcic htm 5 of 9 6 25 2003 10 10 26 AM Consumer Information Centers HONG KONG Philips Hong Kong Limited Consumer Information Centre 16 F Hopewell Centre 17 Kennedy Road WANCHAI Phone 2619 9663 Fax 2481 5847 INDIA BOMBAY Philips India Customer Relation Centre Bandbox House 254 D Dr A Besant Road Worli Bombay 400 025 Phone 020 712 2048 ext 2765 Fax 020 712 1558 CALCUTTA Customer Relation Centre 7 justice Chandra Madhab Road Calcutta 700 020 Phone 020 712 2048 ext 2765 Fax 020 712 1558 MADRAS Customer Relation Centre 3 Haddows Road Madras 600 006 Phone 020 712 2048 ext 2765 Fax 020 712 1558 NEW DELHI Customer Relation Centre 68 Shivaji Marg New Dehli 110 015 Phone 020 712 2048 ext 2765 Fax 020 712 1558 INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl Buncit Raya Kav 99 100 12510 Jakarta Phone 021 7940040 7984255 Ext 1612 Fax 021 7947511 7947539 file D EDFU crt_17 edoc english WARRANTY warcic htm 6 of 9 6 25 2003 10 10 26 AM Consumer Information Centers JAPAN Philips Consumer Electronics 1 11 9 Ebisuminami Shibuya Ku Tokyo 150 Phone 03 3719 2235 Fax 03 3715 9992 KOREA Philips Korea Ltd Philips Hous
109. urers formed to establish and maintain industry wide standards for video cards and monitors VESA was instrumental in the introduction of the Super VGA and Extended VGA video graphics standards see Video graphics adapters with a refresh rate of 70 Hz minimizing flicker and helping to reduce operator eyes fatigue and stress Video dot rate See Dot rate Video graphics adapters A card equipped with a character or graphic generator and video memory which maps to the screen A microprocessor scans video memory and translates bit information from the computer into displayable video signals for the monitor These cards comply with various standards that determine the nature and quality of the display VGA Video Graphics Array introduced in 1987 was the first analog card It offered still higher resolution than EGA 640 X 480 pixels for graphics and 720 x 400 pixels for text and a color palette of 256 colors VGA could also emulate EGA and CGA Super VGA devised by VESA in 1989 offers a resolution of 800 x 600 pixels Extended VGA introduced by VESA in 1991 offers a top resolution of 1024 x 768 pixels non interlaced and a refresh rate slightly higher than IBM s XGA 8514A High end graphics adapters introduced over the last three years for professional workstations offer top file D EDFU crt_17 edoc english GLOSSARY GLOSSARY HTM 17 of 18 6 25 2003 10 03 58 AM Glossary resolutions from 1280 x 1024 to 1600 x 1280 horizo
110. y screen area resulting in an image that is smaller and less legible than it needs to be RETURN TO TOP OF THE PAGE P Parallelogram Distortion See Geometric distortion Phosphor Generic name for the class of substances that exhibit luminescence To produce a picture on screen phosphors are deposited on the inner surface of the picture tube screen and excited into luminescence by the electron beam Typical examples of phosphors are P22 medium short persistence phosphor and EBU high color saturation phosphor Pin cushion Distortion See Geometric distortion Pixel Abbreviation for picture element the smallest element of the picture that can be displayed on the screen The smaller the pixel size the better the resolution of the monitor Pixel size is determined by the size of the electron spot on the screen and not necessarily by the phosphor dot pitch the size of the triad Thus a monitor with a large electron spot covering several triads can exhibit poor resolution even though its dot pitch is small Pixel frequency The number of pixels that can be written in a video line per second Pixel rate See pixel frequency Plug and Play See DDC See USB section RETURN TO TOP OF THE PAGE file D EDFU crt_17 edoc english GLOSSARY GLOSSARY HTM 10 of 18 6 25 2003 10 03 58 AM Glossary R Haster The area on screen that electron beam can reach Refresh rate See Vertical scanning frequency Heso
111. you a service call TO GET WARRANTY SERVICE IN U S A PUERTO RICO OR U S VIRGIN ISLANDS Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing Philips Customer Care Center 877 835 1838 or 402 536 4171 In U S A Puerto Rico and U S Virgin Islands all implied warranties including implied warranties of merchantability and fitness for a particular purpose are limited in duration to the duration of this express warranty But because some states do not allow limitations on how long an implied warranty may last this limitation may not apply to you TO GET WARRANTY SERVICE IN CANADA Please contact Philips at 800 479 6696 One year free parts and one year free labor will be provided at Philips Canada depot or any one of its authorized service centers REMEMBER Please record the model and serial numbers found on the product below MODEL SERIAL This warranty gives you specific legal rights You may have other rights which vary from state province to state province Philips Customer Care Center P O Box 2976 Longview TX 75601 Your International Philips First Choice Warranty Thank you for purchasing this Philips monitor All Philips monitors are designed and manufactured to high standards and deliver high quality file D EDFU crt_17 edoc english WARRANTY 7sxWAR_USA HTM 2 of 3 6 25 2003 10 10 11 AM United States Guarantee per

Download Pdf Manuals

Related Search

Related Contents

  枕“Aroma Villa”  BANDY-ONE  Operation Manual    AU-11SA User Manual  浸出水処理施設建設工事 発注仕様書  Kambrook KSK400 Hot Beverage Maker User Manual  VF-nC1 Industrieller Frequenzumrichter  FICHA DATOS TÉCNICOS GRASA PARA CADENAS TEFLÓN  

Copyright © All rights reserved. Failed to retrieve file