Panasonic CY-TUP133W TV Receiver User Manual
Contents
1. TV Tuner CY TUP133W CY TUN133W Ts Video input Port 1 IN to 4 IN System up connectors E input m Expansion Module CY EM100N TO EXPANSION VIDEO REMOTE IN MODULE Yellow Not used Note Note for the Head Unit remote control unit page 11 e Refer to individual instruction and installation manuals e With some Head Units the Head Unit remote control for each device for detailed installation and wiring unit may not have buttons intended specifically for TV e Connect this unit to the Expansion Module CY operation so some operations cannot be used for TV EM100N option with the Head Unit Expansion Module operation But that does not mean that the tuner or the Connecting Cable and RCA cord video supplied Head Unit are malfunctioning e When the device that provides video output is connected to the System up Connector connect the video cable to input connector below the port to which the System up Connector is connected CY TUP133W TUN133W 23 Electrical Connections inen Head Unit with System up Connector Connecting with Head Unit CQ VD7003W Head Unit CQ VD7003W Note e Refer to individual instruction and installation manuals for each device for detailed installation and wiring e Connect this unit to the Head Unit CQ VD7003W option with the Head Unit Expansion Module Connecting Cable and RCA cord2. television broadcasts page 30 For more information on digital Panasonic welcomes you to our constantly growing family of electronic products owners television broadcasts refer to English We endeavor to give you the advantages of precise electronic and mechanical engineering manufactured with carefully publications from national governments selected components and assembled by people who are proud of the reputation their work has built for our company We and television stations 32 know this product will bring you many hours of enjoyments and after you discover the quality value and reliability we have built into it you too will be proud to be a member of our family S104 Differences between 2 Models Features This Operating instruction manual is for 2 models CY TUP133W and CY TUN133W All illustrations throughout this manual represent model CY TUP133W unless otherwise specified The following table describes the differences between 2 models This unit cannot be operated alone This unit is designed for users to connect car audio AV unit at the same time SECAM CQ VD7003W CQ VD6503W etc AREA SELECT display when turning TV reception area is consisted of 12 Can be combines with Panasonic for the first ti dE Hr OAT Expansion Module CY EM100N option this unit page 8 and other optional devices TV AREA Country Setti TV AREA RPM Compatible with both receiv
3. RCA Cord 3 m 071821 for remote control connector Clip Connector YEAT034C012 Note The number in parenthesis underneath each accessory part name is the part number for maintenance and service e Accessories and their parts numbers are subject to modification without prior notice due to improvements Use the supplied screws for installation exclusively In case of losing any of them please order the specific screw English k CY TUP133W TUN133W 19 o English Installation continues Mounting the Tuner Unit A Caution e Never mount the unit in any of the following locations to avoid damage due to overheating Near the heater port Places like the dashboard or rear deck where it may be exposed to direct sunlight e Do not mount the unit near the door where it could be exposed to rain e You run the risk of interfering with the mounting or causing damage by drilling into the gas tank a wiring harness or other component For mounting the unit on inclined surface Velcro tape fixation is too weak and screw fixation is recommended Note Apply an anticorrosive to the holes and tapping screws Keep a safe distance between the unit and other electronic equipment Unit Installation by using the Tapping Mount the unit on the car carpet Screw 1 Recommended by using Velcro tape 5 Attach the seal s
4. video supplied 24 CY TUP133W TUN133W Head Unit Expansion Module Connecting Cable TV Tuner CY TUP133W VIDEO CY TUN133W Yellow TO HEAD UNIT REMOTE IN Not used Video Yellow 5 RCA cord Note for the Head Unit remote control unit page 11 e With some Head Units the Head Unit remote control unit may not have buttons intended specifically for TV operation so some operations cannot be used for TV operation But that does not mean that the tuner or the Head Unit are malfunctioning Connecting with Head Unit CQ VD6503W AV2 IN Head Unit CQ VD6503W 5 RCA cord Note e Refer to individual instruction and installation manuals for each device for detailed installation and wiring e Connect this unit to the Head Unit CQ VD6503W option with the Head Unit Expansion Module Connecting Cable and RCA cord video supplied no English TO HEAD UNIT VIDEO REMOTE IN Yellow Not used 0000 EJ TV Tuner CY TUP133W Video Yellow CY TUN133W Head Unit Expansion Module Connecting Cable Note for the Head Unit remote control unit page 11 e With some Head Units the Head Unit remote control unit may not have buttons intended specifically for TV operation so some operations cannot be used for TV operation But that does not mean that the tuner or the Head Unit are malfunct
5. 12 V negative ground battery system e To prevent damage to the unit be sure to follow the connection diagram e Do not insert the power connector into the unit until the wiring is completed e Be sure to insulate any exposed wires to prevent short circuiting with the car chassis Bundle all cables and prevent cable terminals from touching any metal parts e Note that if your car has a driving computer or a navigation computer disconnecting the cable from the battery may clear the memory e Run the cords avoiding the spots where the temperature can be extremely high e Fit a vinyl cap over unused connection terminals to prevent contact with metal parts etc Ya adl TV Tuner pz CY TUP133W TC CY TUN133W 16990 x English TV Antenna option Refer to page 10 for the TV antenna connection 3 Power connector Power Control Lead PWRCONT Ee Blue white stripe To the external amplifier control power lead of the Head Unit To ACC power 12 V DC if the Head Unit has no external amplifier control power lead Ground Lead Black Fuse 3 A To a clean bare metallic part of the car chassis Re C BATTERY D Battery Lead Yellow To the car battery continuous 12 V DC lt SIDE BRAKE 0 Parking Brake Side Brake Connection Lead Bright green Be sure to wire the parking brake side br
6. Cable for DVD CD option with RCA cord video audio remote supplied Changer is required page 26 Up to 4 units CA CC30N option mm mE BEER Bees ep iPod iPod Direct Cable is required CA DC300N option Bluetooth iPod The Bluetooth word mark and logo are owned by the iPod is a trademarks of Apple Computer Inc registered ac iL 0 amp Cellular Phone Bluetooth SIG Inc and any use of such marks by in the U S and other countries Matsushita Electric Industrial Co Ltd is under license Hands Free Kit featuring Other trademarks and trade name are those of their Bluetooth technology respective owners CY BT100N option 12 CY TUP133W TUN133W CY TUP133W TUN133W 13 English amp Names of Controls and Terminals TV Tuner Unit TV ANT IN TV OUT Terminal for connecting TV antennas option REMOTE IN Black Terminal for connecting a In Terminal for connecting a dash Monitor CY VM7203W Head Unit s remote output option terminal L mm R mm VIDEO Yellow Connect RCA cord to the video input terminal of the Head Unit when connecting Head Unit Expansion Module Connecting Cable to the Head Unit TO HEAD UNIT EXPANSION MODULE System up connector Terminal for connecting a Head Unit CQ VD7003W CQ VD6503W option Expansion Module CY EM100N option POWER SUPPLY Terminal for connecting to the
7. broadcasts have begun in some countries and regions They are scheduled to spread gradually into other countries and regions 30 CY TUP133W TUN133W Impact on this unit Some countries and regions are gradually changing analog TV broadcast channels to secure the broadcast channels required for the start of digital TV broadcasting Therefore the following effects are anticipated but they are not defects of this unit e t may become impossible to receive broadcasts of previously memorized channels A previously memorized channel may start receiving a different television station e Some channels may be selected memorized for which the image cannot be displayed Remedy Check this instructions and re select the channels change those memorized Specifications General Power supply Current consumption Video output signal Audio output signal Dimensions WxHxD Weight TV Section Usable Sensitivity Note DC 12 V 11 V 16 V test voltage 14 4 V negative ground Less than 0 5 A Composite video signal 1 0 Vp p 75 Q 1 Vrms at 400 Hz With 100 modulation 156x22 5x150 mm 650 g 36 dB uV e Specifications and design are subject to modification without notice due to improvements e Some figures and illustrations on this manual may be different from your product e English CY TUP133W TUN133W 31
8. use only one optional TV antenna the diversity function has no effect 1 The way to plug the antennae varies with the number of antenna terminals TV AREA GROUPI1 How to plug the antennae in when there is only one antenna terminal Press or to select DIVER Only for CY TUP133W Press lt or gt to select ON or OFF Press ENT ENTER or MENU to set and return to the previous display 0000 10 CY TUP133W TUN133W Recommended System and Operation We recommend using this TV tuner with the Panasonic Head Unit below For details on the Head Unit and Head Unit remote control operations refer to the operating instructions for the Head Unit English k Head Unit with Touch Panel Control CQ VD7003W CQ VD6503W Expansion Module CY EM100N and TV Tuner Use the Head Unit touch panel to operate the TV tuner For details on the touch panel and remote control operations refer to the chapter on TV operations in the operating instructions for the Head Unit AF TV tuner remote control unit ga Use this remote control unit ME for TV tuner setup operations TV AREA country settings DIVER Diversity Antenna and Expansion Module Connection Connection is possible even without an Expansion Module Connection TV tuner Head Unit remote control unit This remote control unit enables you to adjust the volume switch sources change 3
9. NJURY 12 Refer wiring and installation to qualified service personnel Installation of this unit requires special skills and experience For maximum safety have it installed by your dealer Panasonic is not liable for any problems resulting from your own installation of the unit Follow the instructions to install and wire the product Not following the instructions to properly install and wire the product could cause an accident or fire care not to damage the leads When wiring take care not to damage the leads Prevent them from getting caught in the vehicle chassis screws and moving parts such as seat rails Do not scratch pull bend or twist the leads Do not run them near heat sources or place heavy objects on them If leads must be run over sharp metal edges protect the leads by winding them with vinyl tape or similar protection 12 Use the designated parts and tools for installation Use the supplied or designated parts and appropriate tools to install the product The use of parts other than those supplied or designated may result in internal damage to the unit Faulty installation may lead to an accident a malfunction or fire T Do not install the product where it is exposed to strong vibrations or is unstable Avoid slanted or strongly curved surfaces for installation If the installation is not stable the unit may fall down while driving and this can lead to an accident or injury A Ware gloves for sa
10. Panasonic TV Tuner TV BU CY TUP133W CY TUN133W Operating Instructions NS ABA Please read these instructions carefully before using this product and keep this manual for future reference e eic ASS HE ASS Sel 0 ASASMS glo SAA S EHAA Bots Ho 9104 2 7 English 2 Safety Information Read the operating instructions for the unit and all other components of your car audio system carefully before using the system They contain instructions about how to use the system in a safe and effective manner Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual This pictograph intends to alert you to the presence of important operating instructions Failure to heed the Warning E may result in severe injury or This unit cannot be operated alone This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations The meaning of the pictographs are explained below It is important that you fully understand the meanings of the pictographs in
11. T OF AIR BAGS OR ACTIVATION OF THE ANTI THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY 18 CY TUP133W TUN133W Installation Precautions This unit should be installed by a professional installer In case of difficulty please consult your nearest authorized Panasonic Service Center This system is to be used only in a 12 V DC battery system car with negative ground Follow the electrical connections carefully page 22 Failure to do so may result in damage to the unit Connect the power lead after all other connections made Be sure to connect the battery lead yellow to the positive terminal of the battery or fuse block BAT terminal Insulate all exposed wires to prevent short circuiting Q Secure all loose wires after installing the unit Please carefully read the operating instructions of the respective equipment before connecting it to this unit Installation Hardware For Installation Installation Hardware For Wiring Item Diagram Qty Item Diagram Qty Tapping Screw 5x16 mm XTT5 16AFZ y Velcro Tape YFX999C135ZA ss Power Connector YEAJ012884 Head Unit Expansion Module Connecting Cable 3 m YEAJ071812 for Expansion Module RCA Cord 3 m YEAJ071819 for video connector RCA Cord 3 m YEAJ071820 for audio connector
12. TV channels and configure the auto preset memory setting In dash Monitor CY VM7203W and TV Tuner EI TV tuner remote control unit country settings and general TV operations For connection configurations other than the recommended connection configurations above refer to the following pages e Head Unit CQ VD7001W Page 27 The remote control units supplied with the Head Unit and Rear Monitor cannot be used for TV tuner operations Except for adjusting the volume switching sources etc Use this remote control unit for INI TV tuner setup operations DIVER mum Diversity Antenna and TV AREA TV tuner In dash monitor remote control unit This remote control unit cannot be used for TV tuner operations Except for adjusting the volume switching sources etc Combination of this TV tuner with the non Panasonic Head Unit in car audio system with a monitor AV unit It will not be possible to operate this TV tuner with a remote control unit or that of the non Panasonic Head Unit CY TUP133W TUN133W 11 Recommended System and Operation continues mum This unit cannot be operated alone l l Head Unit with Touch Panel Control CQ VD7003W CQ VD6503W and TV 11 This unit is designed for users to connect one or more system devices to Panasonic car Tuner 12 audio AV unit at the same time For more details refer to the operating instructions for the connected devi
13. ake for safety and preventing accidents Note If the Expansion Module CY EM100N option is not e Strip about 5 mm of the lead ends for connection connected and the ACC is not mounted on the vehicle e Be sure to fully plug in the connectors Secure them e Connect the power control lead of this unit to the with clamps and tapes external amplifier control power lead of the Head Unit e All other installation methods require the use of If this connection is not made the battery will run dedicated metal fittings Consult with a qualified down servicing engineer or your dealer if other methods are e Before turning off the car engine first use the remote required control to turn off the power for the unit before turning off the power for the In dash Monitor CY VM7203W 22 CY TUP133W TUN133W This unit cannot be operated alone This unit is designed for users to connect one or more system devices to Panasonic car audio AV unit at the same time n2 English Connecting with Head Unit CQ VD7003W and Expansion Module CY EM100N Head Unit CQ VD7003W RCA cord option Video Yellow i Head Unit Expansion Module Connecting Cable To one of the system up connectors input Video Yellow 5 RCA cord Video input Head Unit Expansion Module Connecting Cable supplied with CY EM100N
14. attempt to preset channels WRITE 16 while you are driving e Up to 12 channels can be stored in each of the TV1 and TV2 band selections e TV2 is provided to allow more preset channels in memory Channels that could not be placed in memory on the Band TV1 can be placed on the Band TV2 e f Band TV1 is sufficient to hold all desired channels they should usually be preset to that band Note e New channels overwrite existing saved stations after these procedures Auto Preset Channel Memory With this operation channels with good receiving conditions can be automatically stored in the preset memory Press BAND to select the TV band Press and hold BAND for more than 2 seconds 12 channels with first to 12th highest in signal strength will be preset to each band They are listed in order from the earliest channel number Preset Channel Calling Press BAND to select the TV band Press A or PRESET Selected preset channel number Favorite channels can be written after you have set the preset channel once Example The 25 channel is written in the TV1 preset channel list Press and hold PRESET for more than 2 seconds Preset channel writing mode display appears Press lt CH DOWN or gt CH UP to select channel you want to write SPRESET WRITE TAE Press ENT ENTER or BAND to set Press MENU to exit the preset channel writing mode D
15. cannot be stored VT v v 4 Remote Control Unit No response to pressing buttons gt Select the group where you operate this unit See table on page 15 Antenna installation or wiring of antenna cable is faulty gt Check whether the antenna mounting position and its wiring are correct In addition check to see whether the antenna ground is securely connected to the chassis The safety device works Consult your dealer or your nearest Panasonic Service Center The number of receivable stations is less than 12 Move to an area where receivable channels number is maximum and try presetting Confirm the operation of the presetting and preset channels again The contact of the battery lead is poor or the battery lead is not always powered gt Make sure that the battery lead is connected securely and preset channels again Possible cause Possible solution The battery is inserted in the wrong direction A wrong battery is inserted Insert a correct battery in the correct direction The battery is weak Replace the battery with new one The aimimg direction of the remote control unit is wrong gt Aim the remote control unit at the sensor of the Head Unit and press buttons The wiring is in the wrong way gt Check the wiring of the Head Unit Expansion Module connecting cable when the Head Unit is CO VD7003W CQ VD6503W option gt Check the wiring of RCA cord remote when the In
16. ces e lt System Connection Example Head Unit In dash color LCD m Head Unit with Touch Panel Control CQ VD7003W CQ VD6503W Doppel iei TV Tuner CQ VD7003W option Expansion Module CY EM100N and TV Tuner or amp lt gt JJ CY TUP133W CO VD6503W option E CY TUN133W 4 N D Note 9 e Connect this unit to the Head Unit CQ VD7003W Head Unit Module CQ VD6503W option with the Head Unit Expansion In dash color LCD monitor CY EM100N option Module Connecting Cable and RCA cord video DVD player supplied page 24 25 CQ VD7003W option E or n TV Tuner CQ VD6503W option e CY TUP133W CY TUN133W Note In dash Monitor CY VM7203W and TV Tuner e Connect this unit to the Expansion Module CY EM100N option with the Head Unit Expansion Module Connecting Cable and RCA cord video supplied page 23 Head Unit In dash Monitor CQ VD7003W option alo CY VM7203W option N 6 i je System up Connector DVD Player Receiver i d CQ D5501W option TV Tuner Expansion Module 189895 TV Tuner CY TUP133W CY EM100N option esee 009 Cy TUP133W 7 CY TUN133W CY TUN133W Ey 0 0 8 CD Changer Mit n Bee eee ee gt CX DP880 option ote 7 CKI ii e Connect this unit to the In dash Monitor CY VM7203W Conversion
17. d Unit If this connection is not made the battery will run Note down e Refer to individual instruction and installation manuals for each device for detailed installation and wiring e Connect this unit to the Head Unit CQ VD7001W option with RCA cord video audio remote supplied CY TUP133W TUN133W 27 Troubleshooting m English Ec mud eee f You Suspect Something Wrong A Warning Common continued 27 Check and take steps as described below e Do not use the unit in abnormal condition for example without sound or with smoke or foul If the described suggestions do not solve the problem it is smell which can cause ignition or electric shock Poor reception or noise DIVER Diversity antenna setting is set to OFF recommended to take the unit to your nearest authorized Immediately stop using the unit and consult your TV stations cannot be gt Set ON to receive a good reception Panasonic Service Center The product should be serviced dealer received only by qualified personnel Please refer checking and repair to Never try to repair the unit by yourself because it Only for CY TUP133W professionals is dangerous to do so The group on TV AREA is not selected correctly Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking Never take measures especially those other than in
18. dash Monitor CY VM7203W option is connected The sensor is exposed to direct sunlight The remote control unit may not be operable when the sensor is exposed to direct sunlight In such a case the system is not faulty gt Block off sunlight to the sensor CY TUP133W TUN133W 29 English Troubleshooting continued Product Servicing If the suggestions in the charts do not solve the problem we recommend that you take it to your nearest authorized Panasonic Service Center The product should be serviced only by a qualified technician Replacing the Fuse Use fuses of the same specified rating 3 A Using different substitutes or fuses with higher ratings or connecting the unit directly without a fuse could cause fire or damage to the unit If the replacement fuse fails contact your nearest Panasonic Service Center for service If the Unit Fails to Operate Reset switch Insert a hard slender stick into the hole and push the switch el ND IMPORTANT Press the switch only when the unit fails to operate with any buttons Stored settings and adjustments are not cleared If the unit fails to return to normal condition call the nearest Panasonic Service Center and ask for repairs Tuner for Analog TV only This unit is not compatible with digital television broadcasts Transition from analog TV broadcasts to digital TV broadcasts Digital television
19. dicated by italic letters in Possible solution described below because those are too dangerous for users to handle themselves Common Possible cause gt Possible solution No power to the unit The power cord battery power control and ground is connected in the wrong way gt Check the wiring gt Fuse blows out gt Eliminate the cause of fuse blowout and replace the fuse with new one Consult your dealer Noise There is an electromagnetic wave generator such as a cellular phone near the unit or its electrical lines gt Keep the electromagnetic wave generator such as a cellular phone away from the unit and the wiring of the unit f noise cannot be eliminated due to the wiring b harness of the car consult your dealer The contact of the ground lead is poor gt Make sure that the ground lead is connected to an unpainted part of the chassis securely with engine revolutions gt Change the wiring position of the ground lead Noise is made in step Alternator noise comes from the car gt gt Mount a noise filter the power supply executable Read the operating instructions carefully and cancel the mode If the unit is still Some operations are not Some operations are not executable in particular modes such as menu mode out of order consult your dealer 28 CY TUP133W TUN133W The power of the unit fails unintentionally The number of auto preset channels is less than 12 Preset channels
20. eleting Preset Channel PRESET DELETE Channels can also be deleted from the presets when no longer required Example The 30 channel is deleted in the TV1 preset channel list TV channel you want to write Press and hold V PRESET for more than 2 seconds Preset channel deleting mode display appears and preset 1 channel is received Press or PRESET to select preset channel you want to delete PRESSU Sh AO ch DES OSI ela Preset channel you want to delete Press ENT ENTER or BAND to set Press MENU to exit the preset channel deleting mode CY TUP133W TUN133W 17 English N Installation A Caution e Please follow the laws and regulations of your province or country for installation of the unit e We strongly recommended you to wear gloves for installation work to protect yourself from injuries e Disconnect the cable from the negative battery terminal see caution below 2 ete CN Caution e If your car is equipped with air bag and or anti theft systems specific procedures may be required for connection and disconnection of the battery to install this product e Before attempting installation of this electronic component contact your car dealer or manufacturer to determine the required procedure and strictly follow their instructions e FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMEN
21. ersity Antenna to ON page 10 Q Confirm the electrical connection and video signal of the connected devices Group and TV AREA Country Group TV AREA Country GROUP1 Algeria Bahrain Ghana India Israel Jordan Kenya Kuwait Liberia Malaysia Maldives Nigeria Oman Pakistan Qatar Singapore Srilanka Sudan Thailand UAE Uganda Yemen Zambia GROUP2 Russia GROUPS Italy GROUP4 Rumania Hungary Czech GROUP5 Ireland GROUP6 Hong Kong GROUP7 Angola GROUPS Australia GROUPS China GROUP10 Indonesia GROUP12 South Africa GROUP11 New Zealand Note e Only English is displayed on the OSD screen AREA SELECT can be used to select countries other than those where the product is distributed but this product is not compatible with those countries They are shaded gray in the list 8 CY TUP133W TUN133W When the turn the power on for the first time AREA SELECT TV AREA Country Setting display appears See the left table to select the group where you operate this unit TV AREA TV reception area is consisted of 12 group AREA SELECT IBS GROUP Press lt or gt to select the group included your country See the left table Press ENT ENTER or MENU to set To select the group again Set the TV AREA country setting by pressing MENU Refer to page 15 Remote Control Unit Preparation Be
22. fety Make sure that wiring is completed before installation To prevent damage to the unit do not connect the power connector until the whole wiring is completed 2i Never mount the unit in any of the following locations to avoid damage due to overheating Near the heater port Places like the dashboard or rear deck where it may be exposed to direct sunlight A Do not mount the unit near the door where it could be exposed to rain You run the risk of interfering with the mounting causing damage by drilling into the gas tank a wiring harness or other component Note that if your car has a driving computer or a navigation computer disconnecting the cable from the battery may clear the memory Fit a vinyl cap over unused connection terminals to prevent contact with metal parts etc Observe the following cautions when handling the batteries for the remote control unit Proper Use of the Batteries Use only specified battery CR2025 e Match the polarity of the battery with the and marks in the battery case e Replace a dead battery as soon as possible e Remove the battery from the remote control unit when not using it for an extended period of time e Insulate the battery by placing them in a plastic bag or covering them with vinyl tape before disposal or storage e Do not disassemble recharge heat or short the battery Do not throw a battery into a fire or water e Follow
23. fore Initial Use Pull the insulation film out from the backside of remote control gently Battery Replacement Remove the battery holder with the remote control unit placed on a flat surface CD Stick your thumbnail into the groove and push the holder in the direction of the arrow at the same time Tough pointed object 5 Pull it out in the direction of the arrow using a tough pointed object Back side Put a battery in the case with side facing up Q Put the case back A Warning e Keep a battery away from children to avoid the risk of accidents If an infant ingests a battery please seek immediate medical attention A Caution e Remove and dispose of an old battery immediately e Do not disassemble heat or short a battery Do not throw a battery into a fire or water e Follow local regulations when disposing of a battery e Improper use of a battery may cause overheating an explosion or ignition resulting in injury or a fire Components C en Bam Uy TV Tuner Remote Control Unit EUR7641040 Lithium Battery for Remote Control Unit Included in the remote control lt CR2025 1F gt Operating Instructions YFM284C549ZA Installation Hardware screws cords etc page 19 Note The number in parenthesis underneath each accessory part name is the part number for maintenance and service e Accessories and their parts numbers are subject to modification withou
24. he unit Do not disassemble modify the unit or attempt to repair the product yourself If the product needs to be repaired consult your dealer or an authorised Panasonic Service Center 2 Do not use the unit when it is out of order If the unit is out of order no power no sound or in an abnormal state has foreign objects in it is exposed to water is smoking or smells turn it off immediately and consult your dealer 1 The remote control unit should not lie about the car If the remote control unit lies about it could fall on the floor while driving get wedged under the brake pedal and lead to a traffic accident 2 Refer fuse replacement to qualified service personnel When the fuse blows out eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualified service engineer Incorrect replacement of the fuse may lead to smoke fire and damage to the product 4 When you connect external devices option be sure to connect the parking brake side brake connection lead ensure safety never attempt to preset channels while you are driving Warning Observe the following warnings when installing Disconnect the lead from the negative battery terminal before installation Wiring and installation with the negative battery terminal connected may cause electrical shock and injury due to a short circuit Some cars equipped with the electrical safety sys
25. ide of the Velcro Tape to the unit then CD Tapping Screw mount the unit on the carpet CD Tapping Screw v Velcro Tape Note e Some carpet materials may not be suitable for this mounting method In this case please contact your nearest Panasonic Service Center for installation 20 CY TUP133W TUN133W Connecting the Parking Brake Side Brake Connection Lead A Caution e For safety be sure to ask your nearest professional installer to do this connection Parking Brake Side Brake Connection Lead Bright green When the parking brake side brake lever is engaged the unit is grounded by the chassis Attach a Clip Connector 8 to the end of the parking Parking brake side brake Hand brake Foot brake The parking brake side brake switch position varies with the car model For details on the exact location of the parking brake side brake switch in your car contact your dealer 1 J T siEBRAKE BRAKE S Brake light The Clip Connector 8 is connected to the power source side lead of the parking brake side brake lever brake side brake connection lead Come up to this point Parking Brake Side Brake Connection Lead Bright green Power source side lead CY TUP133W TUN133W 21 m English Electrical Connections gt A Caution e This unit is designed for use in a car having a
26. ing systems Safety Information 2 group page 8 PAL or SECAM Only for CY TUP133W Before Reading These Instructions 6 T Features 7 Receiving NTSC video system only Only for CY TUN133W Preparation 8 4ch Diversity TV Antenna system RAM 9 12 Preset channels for each bands ed Antennal Si uo Favorite channels can be written after you have set the Diversity Antenna Setting preset channel once Channels can also be deleted from the presets when no Recommended System longer required and Operation 11 Note Names of Controls and Terminals 14 e Market conditions regarding optional devices vary with countries and regions For further information consult DIVER and TV AREA Settings 15 YOU UOTIS Basic TV Operation 16 Channel Preset 17 Installation 18 Electrical Connections 22 Troubleshooting 28 Tuner for Analog TV only 30 Specifications 31 6 CY TUP133W TUN133W CY TUP133W TUN133W 7 J English Preparation TV AREA Country Setting Only for CY TUP133W Before settings Install and connect the Head Unit optional devices and this unit Mount the TV antenna page 22 Turn the power on and select the group on AREA SELECT display Set the DIVER Div
27. ioning CY TUP133W TUN133W 25 Electrical Connections oen Head Unit without system up connector Connecting with In dash Monitor CY VM7203W REMOTE IN Black AV IN R Red L White o English TV OUT TV Tuner CY TUP133W CY TUN133W In dash Monitor CY VM7203W amp RCA cord Red Black Note e Refer to individual instruction and installation manuals for each device for detailed installation and wiring e Connect this unit to the In dash Monitor CY VM7203W option with RCA cord video audio remote supplied If the ACC is not mounted on the vehicle e Before turning off the car engine first use the remote control to turn off the power for the unit before turning off the power for the In dash Monitor CY VM7203W 26 CY TUP133W TUN133W Connecting with Head Unit CQ VD7001W m English REMOTE IN Black Head Unit R Red CQ VD7001W L White VIDEO Yellow TV Tuner CY TUP133W Video Yellow CY TUN133W RCA cord Video Yellow RCA cord White Red L White G RCA cord REMOTE OUT Black E TV CONT TV CONT_ TV CONT Not used AMP CONT MAX 0 1A H gt If the ACC is not mounted on the vehicle e Connect the power control lead of this unit to the external amplifier control power lead of the Hea
28. l exposed wired to prevent short circuiting Never try to repair the unit by yourself because it is dangerous to do so CY TUP133W TUN133W 3 ro English English Safety Information continued AN Caution Observe the following cautions when using this unit This unit is designed for use exclusively in automobiles Do not operate the unit for a prolonged period with the engine turned off Operating the audio system for a long period of time with the engine turned off will drain the battery 2 Do not expose the unit to direct sunlight or excessive heat Otherwise these will raise the interior temperature of the unit and it may lead to smoke fire or other damage to the unit C Do not use the product where it will be exposed to water moisture or dust Exposure of the unit to water moisture or dust may lead to smoke fire or other damage to the unit Make especially sure that the unit does not get wet in car washes or on rainy days 4 CY TUP133W TUN133W AN Caution Observe the following cautions when installing T lf your car is equipped with air bag and or anti theft systems specific procedures may be required for connection and disconnection of the battery to install this product CJ FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL I
29. local regulations when disposing of a battery e Improper use of a battery may cause overheating an explosion or ignition resulting in injury or a fire In case of battery leakage e Thoroughly wipe the battery liquid off the battery case and insert new battery e f any part of your body or clothing comes into contact with battery liquid wash it with plenty of water f battery liquid comes into contact with your eyes wash them with plenty of water and get immediate medical attention Please follow the laws and regulations of your province or country for installation of the unit Connection of Parking Side Brake Connecting Lead WARNIIING VIDEO VIEWING 1 NOT AVAILABLE WHILE DRIVING This system is designated so that you cannot see TV or motion pictures while you are driving e Park your car in a safe and pull the parking brake side brake lever before watching the monitor e f a rear monitor option is connected to this unit you can continually see the rear monitor image even if the parking brake side brake has not been pulled on A Warning When you connect external devices option be sure to connect the parking brake side brake connection lead page 21 Note e Only English is displayed on the OSD screen CY TUP133W TUN133W 9 English Before Reading These Instructions This unit is not compatible with digita Contents English
30. order to use this manual and the system properly This pictograph intends to alert you to the presence of important operating instructions Failure to heed the Caution instructions may result in injury or material damage This unit is designed for users to connect one or more system devices to Panasonic car audio AV unit at the same time For more details about safety information refer to the operating instructions for the connected devices Warning Observe the following warnings when using the unit The driver should neither watch the display nor operate the system while driving Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents Always stop the vehicle in a safe location and use the parking brake before watching the display or operating the system 2 Use the proper power supply This product is designed for operation with a negative grounded 12 V DC battery system Never operate this product with other battery system especially a 24 V DC battery system Keep a battery away from children to avoid the risk of accidents If an infant ingests a battery please seek immediate medical attention Batteries and insulation film can be ingested so keep them out of the reach of infants If and infant ingests a battery or insulation film please seek immediate medical attention CY TUP133W TUN133W 2 Do not disassemble or modify t
31. power connector Remote Control Unit Note e Point the emitter of the remote controller at the Head PWR Power eus e Switches on off the power page 16 NN Unit or the monitor ENT ENTER e Determines an operation or item page 15 e Shows TV channel display page 16 BAND Sy GE MENU e Selects TV band page 16 Shows the menu screen page 15 Searches for channels and memorizes them automatically page 17 V PRESET e Selects DIVER or TV AREA setting page 15 Only for CY TUP133W e Selects the preset channel page 17 e Sets the preset channel writing deleting mode page 17 lt CH DOWN gt CH UP e Selects an operation or item page 15 Panasonic Selects or searches the channel page TV TUNER 16 14 CY TUP133W TUN133W DIVER and TV AREA Settings 5 2 u TV AREA Setting is only for CY TUP133W DIVER Diversity Antenna Setting om Diversity TV Antenna 14 Refer to page 8 about the TV AREA Country setting Refer to page 10 about the DIVER Diversity Antenna setting Read the explanation on this page as required lt gt Group and TV AREA Country Group TV AREA Country GROUP1 Algeria Bahrain Ghana India Israel Jordan Kenya Kuwait Liberia Malaysia Maldives Nigeria Oman Pakistan Qatar Singapore Srilanka Sudan Thailand UAE Uganda Yemen Zambia GROUP2 Russia GROUP3 Italy GROUP4 R
32. t prior notice due to improvements Note e Battery Information Battery Type Panasonic lithium battery CR2025 Included in the remote control Battery Life Approximately 6 months under normal use at room temperature CY TUP133W TUN133W 9 English S English Diversity TV Antenna How to plug the antennae in when there are two Diversity TV Antenna Of the two antennae connected to the system the one with the best reception is automatically selected for TV reception Turning DIVER Diversity setting to ON reduces noise To make effective use of this diversity function Connect both two TV antennae provided Turn DIVER Diversity setting to ON Note e f only one is connected the diversity function has no effect 2 Make sure the DIVER Diversity setting is OFF To use the two optional antennae Two antennae must be prepared Plug the four terminals for the two antennae into the tuner Combine the tuner TV terminals and the antenna terminals as shown on page 22 How to plug the antennae in when there is only one antenna terminal DIVER Diversity Antenna Setting Confirm ON to receive a good reception 0000 Default ON 1 00090 Setting ON OFF bo Press PWR Power Press MENU Make sure the DIVER Diversity setting is ON Note DIVER ONI If there is no alternative but to
33. tem have specific procedures of battery terminal disconnection FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH 2 Never use safety related components for installation grounding and other such functions Do not use safety related vehicle components fuel tank brake suspension steering wheel pedals airbags etc for wiring or fixing the product or its accessories Installing the product on the air bag cover or in a location where it interferes with airbag operation is prohibited Check for piping gasoline tank electric wiring and other items before installing the product If you need to open a hole in the vehicle chassis to attach or wire the product first check where the wire harness gasoline tank and electric wiring are located Then open the hole from outside if possible Never have the power cord branched to supply other equipment with power After installation and wiring you should check the normal operation of other electrical equipment The continuation of their using in abnormal conditions may cause fire electrical shock or a traffic accident In the case of installation to an airbag equipped car confirm warnings and cautions of the vehicle manufacturer before installation Make sure the leads do not interfere with driving or getting in and out of the vehicle Insulate al
34. umania Hungary Czech GROUP5 Ireland GROUP6 Hong Kong GROUP7 Angola GROUPS Australia GROUPS China GROUP10 Indonesia GROUP11 New Zealand GROUP12 South Africa Note e Only English is displayed on the OSD screen e AREA SELECT can be used to select countries other than those where the product is distributed but this product is not compatible with those countries They are shaded gray in the list Of the two antennae connected to the system the one with the best reception is automatically selected for TV reception Turning DIVER Diversity setting to ON reduces noise Confirm ON to receive a good reception Default ON Setting ON OFF Press PWR Power Press MENU DIVER AREA GROUP1 Press or to select DIVER Only for CY TUP133W Press lt or gt to select ON or OFF Q Press ENT ENTER or MENU to set and return to the previous display Only for CY TUP133W TV AREA Country Setting TV AREA TV reception area is consisted of 12 group See the left table to select the group where you operate this unit Setting GROUP1 to GROUP12 Press PWR Power Press MENU DIVER TV AREA Press or V to select TV AREA Press lt or gt to select the group included your country See the left table Press ENT ENTER or MENU to set and ret
35. urn to the previous display CY TUP133W TUN133W 15 Refer to the COQ VD7003W and CQ VD6503W instruction manuals for information on TV operation on the CQ VD7003W and CQ VD6503W touch panel and remote control PWR Power ENT ENTER BAND MENU lt CH DOWN gt CH UP PRESET Panasonic TV TUNER 16 CY TUP133W TUN133W Power Turn your car s ignition key to the ACC or ON position ON Press PWR Power OFF Press PWR Power again Note e When changing the source to TV tuner on Head Unit CQ VD7003W CQ VD6503W etc the power is turned on automatically Band Selection Press BAND TV1 Note e TV2 is provided to allow more preset channels in memory Channel Selection Press lt CH DOWN or gt CH UP gt CH UP Higher channel number lt CH DOWN Lower channel number Press and hold lt CH DOWN or gt CH UP for more than 0 5 seconds then release it Seeking will start TV Channel Display Press ENT ENTER Press ENT ENTER again to display off Example When preset channel is not set TV band Selected TV channel number Toon ir j M A ci Note e Only English is displayed on the OSD screen e Background of the display becomes blue when the unit cannot get a good reception on the TV Channel Preset A Warning Writing Preset Channel PRESET m e To ensure safety never
Download Pdf Manuals
Related Search