Oricom 510 Baby Monitor User Manual
Contents
1. 2 USING YOUR DIGITAL BABY MONITOR Choose a song to play using the Parent unit 1 Press Nightlight is displayed press to display Music and press 2 Play is displayed press to display Choose Song and press 3 Use the and buttons to scroll through the eight song titles and Play Press eo when the option you want is displayed The display will show Saved briefly and you ll hear a confirmation tone The eight song choices are 3 Blind Mice Brahms Canon in D Dream Chase Dreaming Hush Baby Night Night and Twinkle Star Play will play a medley of all eight songs Set a play time for music 1 Press Nightlight is displayed press to display Music and press 2 Play is displayed press until Timer is displayed and press 3 Use the Q and buttons to scroll through the options 5 min 10 min 15 min or Constant and press when the option you want is displayed The display will show Saved briefly and you ll hear a confirmation tone USING YOUR DIGITAL BABY MONITOR 29 Feed Timer You can set a Feed Timer on the Parent unit to act as a countdown timer that will alert you when you next need to feed your baby You have a choice of alert types beep beep amp vibe and vibrate and you can set the timer to repeat itself once the alert sounds Set the feed timer countdown duration 1 Press o Nightlight is displayed press until Feed Timer is displayed and press 2 Start is displ2. the timer will then disappear and the display will return to idle USING YOUR DIGITAL BABY MONITOR 31 Switch timer repeat option on or off 1 Press o Nightlight is displayed press until Feed Timer is displayed and press 2 Start is displayed press until Timer Repeat is displayed and press 3 Use the buttons to display either Repeat On or Repeat Off and press to select The display will show Saved and you will hear a confirmation beep When Repeat On has been set the feed timer countdown will start again once the alert has sounded if it is not switched off The default setting is Repeat On Select the type of feed timer alert 1 Press o Nightlight is displayed press until Feed Timer is displayed and press 2 Start is displayed press until Alert is displayed and press 3 Use the buttons to display either Beep Beep amp Vibe or Vibrate and press to select The display will show Saved and you will hear a confirmation beep Feed timer alert options Beep Parent unit will emit an alert beep only Beep amp Vibe Parent unit will emit an alert beep and vibrate Vibrate Parent unit will vibrate only The default setting is Beep amp Vibe USING YOUR DIGITAL BABY MONITOR IMPORTANT The temperature sensor used in this Oricom Digital Baby Monitor is intended as a guide to provide parents with an indication of the room temperature in which the Baby unit has be
3. Sudden Infant Death Syndrome SID S or cot death and you should not rely on it for your baby s wellbeing It is important that you regularly check on your baby personally Make sure the Baby unit Parent unit and mains adaptor cables are kept out of reach of your baby and other young children at all times at least one metre away Never place the baby unit or parent unit inside your baby s cot bed or playpen Never cover the Parent or baby units with clothes towels or blankets or any other item Never use or place your Parent or Baby unit in or near moisture or water e g near bath or pool Immersing in water could cause electric shock and even death IMPORTANT SAFETY INFORMATION The installation location plays an important role in ensuring proper operation Therefore maintain a distance of at least one meter from other electronic equipment such as microwave ovens or hi fi devices otherwise they could cause interference During continual use the Baby unit power adaptors may become warm to the touch This is normal and should not be a concern Risk of suffocation Keep all packaging materials and protective foils out of reach of children Do not place the AC Adaptor cable in a high wear and tear location Never use a frayed or compromised cord Battery safety Batteries represent a hazard to health and the environment They contain toxic ecologically hazardous heavy metals Do not dispose of batteries
4. in a fire as they may explode Dispose of batteries according to local regulations never in your household rubbish Do not dismantle cut open crush bend puncture or shred cells or batteries If a battery leaks do not let the battery liquid touch skin or eyes If this happens immediately flush the affected areas with water and seek medical assistance Do not modify remanufacture attempt to insert foreign objects into the battery or immerse or expose it to water or other liquids Batteries may explode if damaged 6 Use only the batteries supplied with the product Improper use or use of unapproved batteries may present a risk of fire explosion or other hazard and may invalidate any approval or warranty f you believe the batteries are damaged remove product from the charger and stop using the product Contact Oricom for assistance Never use a damaged battery Disposal Always dispose of your products at the end of their life in accordance with your local waste disposal requirements Packaging materials all cardboard and paper packaging should be recycled in accordance with your local council waste regulations 7 This User Guide provides you with all the information you need to get the most from your Oricom Digital Baby Monitor Please read this guide carefully and keep it for future reference Need help If you need assist
5. minutes then the alert will automatically stop Torch The Parent unit has a high intensity white LED torch that can be used when the Parent unit is switched on or off 1 Press the lt gt button located on the back of the Parent unit to switch the Torch on and off When the Torch is switched on it will automatically switch Mute All on as well If you then press the button Mute will be disabled and the Torch will remain on When the Torch is switched off the previous Mute setting will be restored No Mute Mute All or Mute Low USING YOUR DIGITAL BABY MONITOR 25 The Parent unit menu The button on the Parent unit can be used to select and change settings on the Baby unit without having to risk disturbing your baby You can access the settings by 1 Press eo then press Or to scroll through the menu options shown on the top of the display Press when the option you want is displayed 2 The first sub menu option will be displayed press to scroll through the options The arrows indicate when you can scroll either down Press o when the option you want is displayed 3 To exit the menu at any time press briefly and step back menu level at a time or press and hold to return to the idle screen If no buttons are pressed for 10 seconds whilst accessing the menu the display will return to idle and any unsaved changes will be lost Nightlight You can set a comforting nightlight
6. or insurance of the product to return the faulty product to us however we will arrange delivery of the repaired or replaced faulty product to you 42 Mua Important Information Repair Notice Please be aware that the repair of your goods may result in the loss of any user generated data such as stored telephone numbers text messages and contact information Please ensure that you have made a copy of any data saved on your goods before sending for repair Please also be aware that goods presented for repair may be replaced by refurbished goods or parts of the same type rather than being repaired WARRANTY 5 Warranty Information Australia This Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369 Unit 1 4 Sovereign Place South Windsor NSW 2756 herein after referred to as Oricom Oricom makes no other warranties or conditions express or implied including as to acceptable quality and fitness for a particular purpose except as stated in this Warranty Any implied warranties that may be imposed by law are limited in duration to the Warranty Period Oricom warrants that the product is free from defects in materials or workmanship during the Warranty Period This Warranty does not extend to any product from which the serial number has been removed or was purchased outside of Australia This warranty in no way affects your statutory warranty rights under the Competition and Consumer Act 2010 or a
7. ance setting up or using your Oricom Digital Baby Monitor call our Support team on 1300 889 785 If you would like any additional or replacement rechargeable batteries for the parent unit Part No BAT1300MAH order online at www oricom com au Our dedicated advisors are more likely to be able to help you than the retailer where you made your purchase 5 Alternatively you may find the answer in the Help section at the back of this guide Additional answers to Frequently Asked Questions are also available from www oricom com au Got everything Baby unit Parent unit 2 x AA NIMH 1300mAh rechargeable batteries for Parent unit pre installed Parent unit charger 2 x power adapters Parent unit Baby sound level LEDs Indicates the level of received sound The LEDs will light up progressively as the sound increases See page 20 for further information Mute LED Steady red indicates that Mute All has been switched on Amber indicates that Mute Low has been switched on Talk on side of unit Press to talk to your baby LCD Display Power saving backlight turns on when you press any button and then switches off after 15 seconds Menu Press to open the menu Press and hold to exit the menu and return to the idle screen Mute Low on top of unit Press to toggle the Baby unit microphone sensitivity between ORICOM DIGITAL BABY MONITOR Mute on top of unit Press to toggle the on top o
8. ashing green TROUBLESHOOTING 39 Battery low on Put the Parent unit back on the charger to charge Parent unit Place Parent unit back on the charger as frequently as possible or ideally leave it on the charger to ensure the batteries remain charged To shorten the charging time you can turn the Parent unit off if it is not being used while it is charging You may have set the volume too low see page 22 to increase the volume You may have switched a Mute feature on see pages 22 You can hear a high The units might be too close to each other pitched noise The volume setting might be too high see page 21 Talk back feature is Check that the volume is loud enough at the Baby unit not working see page 21 Check the units are linked see page 17 Parent unit remains silent or very quiet 40 Customer Support If you have any problems setting up or using this product you will find useful tips and information in the Troubleshooting section of this user guide as well as Frequently Asked Questions on our website www oricom com au If you have further questions about using the product after reviewing the resources above or would like to purchase replacement parts or accessories please call our Customer Support Team Our dedicated local support team are more likely to be able to help you than the retailer where you made your purchase Important Please retain your purcha
9. ayed press to display Duration and press 3 The display will show 02h 00m or the currently set timer Use the buttons to select the first digit and press Repeat this procedure for each digit and press The display will show Saved and you ll hear a confirmation beep The timer can be set from 1 minute to 99 hours 59 minutes The feed timer default countdown duration is set at 02 00 2 hours If the Parent unit is switched off the feed timer countdown will be cancelled and you will need to start it again when the unit is switched back on The duration alert type and repeat settings will still be retained USING YOUR DIGITAL BABY MONITOR Start the feed timer countdown 1 Press Nightlight is displayed press until Feed Timer is displayed press 2 Start is displayed press The display will briefly show Timer On and then the timer will be shown counting down the seconds from the time you set When the timer has finished counting down to 00 00 you will hear an alert beep and the timer digits and icon will flash Press any button on the Parent unit to stop the alert If you do not stop the alert it will automatically stop after 2 minutes or it will start again if Timer Repeat has been set Cancel the feed timer countdown 1 Press o Nightlight is displayed press until Feed Timer is displayed and press 2 Stop is displayed press The display will briefly show Timer Off
10. displayed and press 3 Use the and buttons to display either Beep Beep amp Vibe Vibrate Screen Only or Off and press to select The display will show Saved and you will hear a confirmation beep To stop an alert beep press any button on the Parent unit 4 USING YOUR DIGITAL BABY MONITOR Temperature alert options Beep Parent unit will beep 4 icon will flash Beep amp Vibe Parent unit will beep and vibrate d icon will flash Vibrate Parent unit will vibrate icon will flash Screen Only icon will flash Off No alerts d icon will not be displayed All of the above alerts will also display the appropriate message Too Hot Too Warm or Too Cold Pre set temperature alert range The Baby unit comes with pre set maximum and minimum temperatures If the temperature falls below or goes above the setting an alert will sound on the Parent unit and the display will show Too Cold or Too Hot as appropriate The temperature alert pre set temperatures are below 16 C and above 24 C Alerts will be repeated if the temperature creeps by 2 C into an alerting range The default setting is Beep amp Vibrate Crying alert The crying alert will only be activated if Mute has been switched on or if the Parent unit volume has been switched to volume off see page 22 for information on the Mute All feature With Mute All switched on if your baby starts to cry you will not be able to hear the cries but if the cries sou
11. e display shows Volume Off The Mute All indicator will illuminate At the Baby unit There are 5 volume settings 1 When Music is being played or Talk back is in progress from the Parent unit press the or button to adjust the volume 2 If no music or Talk back is in use pressing the or buttons will adjust the volume and a beep will sound at the appropriate Volume level set If you try and set the volume higher or lower than the 5 settings available on either unit you will hear an error tone Setting the Parent unit to Volume Off is the equivalent of switching the Mute All feature on See page 22 for more information on Mute All The default loudspeaker volume on both units is Level 3 22 USING YOUR DIGITAL BABY MONITOR Mute All feature Parent unit only The Mute All feature prevents any sound coming from the Parent unit loudspeaker With Mute All on you can still monitor your baby using the Baby sound level LED indicators page 20 and the Crying Alert page 34 1 To switch Mute All on press the button located on the top of the unit The Mute indicator will illuminated red 2 To switch Mute off press the button again The red Mute indicator will switch off Be careful not to accidentally switch the torch feature on because Mute All is automatically switched on when the Torch is switched on Setting the Parent unit loudspeaker volume to Volume off is the equivalent of switching the Mute Al
12. en placed It is designed to operate within an approximate tolerance of 1 C and is not intended to be as accurate as some medical devices Please note that your own temperature reference e g your central heating thermostat may not be as accurate possibly due to tolerances and positioning of the thermostat in relation to the Baby Monitor sensor Healthcare professionals advise that the ideal temperature for your baby s room is between 16 C and 20 C Your Parent unit has a built in mechanism to prevent repeated annoying audible alerts if the room temperature hovers around an alerting threshold Temperature monitor There is a temperature sensor on the Baby unit to constantly monitor the temperature in your baby s room and you ll be alerted if it gets too hot too warm or too cold The Parent unit will vibrate sound an alert beep and display a message on the screen The alerts on the Parent unit can be changed see page 34 The temperature will be constantly shown on the Parent unit display in C To stop an alert beep press any button on the Parent unit USING YOUR DIGITAL BABY MONITOR 55 Temperature monitor indicators Below 16 C Display shows Too Cold 16 20 21 24 Display shows Warm Over 24 C Display shows Too Hot Select the type of temperature alert 1 Press o Nightlight is displayed press until SetUp is displayed and press 2 Crying Alert is displayed press until Temp Alert is
13. f unit Parent unit receive Press and hold to volume between normal and Mute Low on and off Power on off switch the power on or off Cd Torch on back of unit 09000 Down Decrease speaker volume Scroll through the menu options Press to switch the torch feature on and off Link indicator Steady green indicates that the Baby and Parent units are linked Flashes green if no link established for 30 seconds Flashes red if no link established after 30 seconds Also flashes green when the Talk button is pressed on the Parent unit to initiate parental talk back Battery status indicator Red light indicates the batteries are low and need re charging Microphone OK Press to confirm the menu option displayed Up Increase speaker volume Scroll through the menu options ORICOM DIGITAL BABY MONITOR Parent unit display icons Menu options Nightlight Music Feed Timer Setup i e NE NM asop Battery status d d es LL amp Temperature alert vibrate on Feed timer on vibrate 4 Temperature alert vibrate off Feed timer on vibrate off Nightlight is on LL Full charge 75 100 d Music is playing Medium charge 51 74 BB Low charge 25 50 36 Displays the temperature as Empty 8 24 measured at the Baby unit 0 7 crying alert vibrate on WEEE Icon will scroll when charging Crying alert vibrate off A Indicates when you ca
14. from the Baby unit Please note that when using Talk Back you will not be able to hear your baby until you release the button 1 Press and hold down the button on the Parent unit to speak to your baby Whilst the button is depressed the display will show Talk and the green Link indicators will flash on both units Talk Back You will be able to activate Talk Back mode even if other functions have been activated at the Baby unit like Music playback or Nightlight on Press e or to adjust the Talk Back volume level of the Baby unit loudspeaker Do not press the button when the Baby unit and Parent unit are positioned in the same room High pitch noise will be generated if the button is pressed when Baby unit and Parent unit are close to each other or within 3 metres distance When using Talk Back hold the Parent unit approximately 30cm in front of your mouth when talking to baby 24 YOUR DIGITAL BABY MONITOR Find You can press the button on the Baby unit to make the Parent unit sound an alert to help you find it if its been misplaced If the Parent unit loudspeaker volume had been Muted or set to volume off the volume level will be reset to the default setting of Level 3 1 Press on the Baby unit The paging alert will sound at the Parent unit and the display will show Here 1 am 2 To stop the alert press any button on the Parent unit or press the Qo button again on the Baby unit If no button is pressed after 2
15. he link is still broken the Baby and Parent units Link indicators will flash red The Parent unit display will show No Link and you will hear an alert signal 18 AKNE If the link is broken check that the mains power is plugged in and switched on at the Baby unit check that both units are switched on check that the batteries are charged in the Parent unit check that the Parent and Baby units are within range of each other in ideal conditions the range is up to 300 metres outdoors and 50m indoors Positioning your units The Baby unit should ideally be within 1m 2m of your baby for best performance If you place the Parent and Baby units too close together you will hear a high pitched noise this is normal The units are designed to be located at a distance from one another e g in separate rooms USING YOUR DIGITAL BABY MONITOR Switching on off Switch the Baby unit on 1 Press and hold the button for 1 second The nightlight will briefly illuminate and then the green Link indicator will flash until it links with the Parent unit Once linked the green Link indicator will remain on Switch the Parent unit on 1 Press and hold the button on the Parent unit until all the LEDs briefly illuminate The green Link indicator will flash and the display will show I m Linking Once the units are linked the green Link indicators on the Parent and Baby units will stop flashing and remain a steady green The unit
16. l feature on Mute Low For discreet operation when you do not wish to hear any low level sounds you can still monitor your baby using the Baby sound level LED indicators page 20 When Mute Low is switched on any sounds from the Baby unit to the Parent unit will be muted unless a sound is made above a set level The set level are sounds that are louder than the first two green LEDs would register as described in Baby sound level LED indicators on page 20 If the or buttons are pressed whilst Mute All or Mute Low has been set then Mute All or Low will be switched off and the loudspeaker volume will return to Level 3 automatically USING YOUR DIGITAL BABY MONITOR 25 If the Parent unit receives sound up to the level of the first two LEDs then they will turn amber but no sound will be heard if the sound rises above this level then the unit will un mute so you can hear the sounds 1 To switch Mute Low on press the button located on the top of the Parent unit The Mute indicator will turn amber 2 To switch Mute Low off press the button again The amber indicator will switch off Once the Mute Low sound threshold has been exceeded baby sounds will be able to be heard for a further six seconds even if they do not reach the Mute Low threshold Talk Back You can use the Parent unit Talk Back feature as a one way intercom to comfort and reassure your baby By speaking into the Parent unit your baby will hear your voice
17. lremium DECT tal Baby Monitor Secure 510 ADVANCED ECT 18 TECHNOLOGY lt User Guide con TABLE OF CONTENTS S IMPORTANT SAFETY INFORMATION 4 GETTING STARTED sss asses 7 ORICOM DIGITAL BABY MONITOR 8 SETTING UPS Sse a as 14 USING YOUR DIGITAL BABY MONITOR 19 TROUBLESHOOTING issa a ad 38 CUSTOMER SUPPORT sass aaa satin 40 WARRANTY 41 IMPORTANT SAFETY INFORMATION Important Safety Information e tis very important that you read the User Guide carefully as it contains detailed information you will need to get the most from your Oricom Baby Monitor If you have any issues setting up or using your Oricom Baby monitor please call our Customer support team Our dedicated local team are more likely to be able to help you than the retailer where you made your purchase Your ORICOM Baby Monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision of a child The Baby Monitor has been designed to provide some added reassurance in the form of sound transmission for those times when you are not in the same room as your baby provided you always stay within hearing range of the baby monitor during use Your Baby Monitor is not a medical device nor a device to prevent cases of
18. n on the display will show a full charge EEE Warning Only use the power adaptors supplied Using incorrect power may permanently damage your product This product is designed for indoor use only 16 Battery performance Rechargeable batteries in the Parent unit will last up to 20 hours in normal use Please note that new batteries do not reach full capacity until they have been in normal use for several days The charge capacity of rechargeable batteries will reduce with time as they wear out so reducing the performance time of the Parent unit Eventually they will need to be replaced New batteries can be obtained from the Oricom Digital Baby Monitor Support Centre 1300 889 785 The Parent unit rechargeable batteries will lose charge over a period of time even if switched off Battery low warning Parent unit When the batteries are low approximately within 1 hour of running out the Parent unit will emit a low battery alert the low battery indicator will turn red the display will show Low Battery and the r will flash Place the Parent unit back on the charger to charge the batteries To speed up the charging process turn the Parent unit off when charging if it s not being used You can still use your Parent unit to monitor your baby even when the batteries are low provided it remains in the charger cradle to re charge the batteries Baby unit 1 Plug the remaining power adaptor cable into
19. n scroll up or down through the menu options ORICOM DIGITAL BABY MONITOR Baby unit Nightlight Press to switch the Nightlight on or off Power on off Press and hold to switch the power on or off L Skip forward T d When music has been 7 Pp v Z switched on see Music button description below 4 WA press to skip through the G songs available Music v ab Press to switch music on lt at the Baby unit the music i tink uu and duration will be as last d 2 set at the Parent unit Press HD Sound again to switch the music off To change the song press the Skip button Temperature sensor Make sure the sensor is placed with clear space around it and not in contact with any surfaces to ensure it works effectively Microphone Brightness Press to adjust the nightlight brightness high medium or low once the nightlight has been switched on Find Press to emit an alert beep from the Parent unit useful for finding the Parent unit if you ve misplaced it Volume up down Increase or decrease the loudspeaker volume for playing music or for parental talk back Nightlight around the base Link indicator Steady green indicates that the Baby and Parent units are linked Flashes green if no link established for 30 seconds Flashes red if no link established after 30 seconds Also flashes green when the Talk button is pressed on the Parent unit to ini
20. n tone The default setting is Constant USING YOUR DIGITAL BABY MONITOR 27 Play music from the Baby unit The Baby unit has eight songs that can be played to gently soothe your baby You can select one song to play repeatedly or select the Play All option for a medley of all eight songs The songs can be set to play in a loop for 5 10 or 15 minutes or you can leave them playing constantly The default music setting is Play All songs Constantly Turn music on off using the Baby unit 1 To turn the music on press the 6 button The most recently selected song will start playing at the time period last selected using the Parent unit 2 Press the e button repeatedly to change the pre selected song 3 To turn the music off press the button Adjust the volume of the music using the e buttons on the Baby unit If music is played at greater than volume 3 the Crying Alert may activate if Mute All is used Turn music on off using the Parent unit 1 To turn the music on press Nightlight is displayed press to display Music and press 2 Play is displayed press o The display will briefly show Music On then the name of the song and the icon and the song will start to play on the Baby unit 3 To turn the music off press 55 to display Music and press eo The display will show Stop press The display will show Music Off the d icon will disappear and the music will stop playing on the Baby unit
21. nd above a certain level i e if they reach 83dBA which is the 1st red Baby sound level LED then the Parent unit will activate the crying alert The default crying alert is for the Parent unit to vibrate and emit an audible beep but you can select a different alert if you want to USING YOUR DIGITAL BABY MONITOR 5 Select the type of crying alert 1 Press o Nightlight is displayed press until SetUp is displayed and press 2 Crying Alert is displayed press 3 Use the and buttons to display either Beep Beep amp Vibe Vibrate or Screen Only and press to select The display will show Saved and you will hear a confirmation beep To stop an alert beep press any button on the Parent unit Crying alert options Beep Parent unit will beep Crying Alert will be displayed and amp icon will flash Beep amp Vibe Parent unit will beep and vibrate Crying Alert will be displayed and icon will flash Vibrate Parent unit will vibrate only no alert beep will sound Crying Alert will be displayed and the icon will flash Screen Only Crying Alert will be displayed and the icon will flash The default setting is Beep amp Vibrate 36 YOUR DIGITAL BABY MONITOR Backlight You can select whether or not the LCD backlight comes on when an alert is activated When the backlight comes on it will stay on for 15 seconds The default setting is On 1 Press o Nightlight is displayed press until Se
22. ny other similar legislation The Warranty Period will be 3 years from the date of purchase of the product evidenced by your dated sales receipt You are required to provide proof of purchase as a condition of receiving warranty services You are entitled to a replacement product or repair of the product according to the terms and conditions of this document if your product is found to be faulty within the Warranty Period This Warranty extends to the original purchaser only and is not transferable Rechargeable battery cells and rechargeable battery packs if supplied with this product are covered under this warranty for a period of 90 days 44 Mua Products distributed Oricom are manufactured using new materials or new and used materials equivalent to new in performance and reliability Spare parts may be new or equivalent to new Spare parts are warranted to be free from defects in material or workmanship for thirty 30 days or for the remainder of the Warranty Period of the Oricom branded product in which they are installed whichever is longer During the Warranty Period Oricom will where possible repair and if not replace the faulty product or part thereof All component parts removed under this Warranty become the property of Oricom In the unlikely event that your Oricom product has a recurring failure Oricom may subject to the Competition and Consumer Act 2010 at its discretion elect to provide you with a replacement produc
23. on the Baby unit There are 3 brightness levels to choose from and you can set a period of time for the nightlight to illuminate The Baby unit must be switched on for the nightlight to work but need not be linked to the Parent unit Switch nightlight on off and select brightness level using the Baby unit 1 To switch on press the button 2 TPress repeatedly to select the brightness level 2 To switch off press 26 USING YOUR DIGITAL BABY MONITOR Switch nightlight on off using the Parent unit 1 To switch on press the button Nightlight is displayed press 2 Turn is displayed press eo Light On will briefly be displayed then the icon 3 To switch off press Nightlight is displayed press Turn Off is displayed press Light Off will briefly be displayed and then the icon will disappear Select the nightlight brightness level using the Parent unit 1 Press Nightlight is displayed press o 2 Press to display Brightness and press 3 Press to display either Low Medium or High and press to select The display will show Saved briefly and you ll hear a confirmation tone The default setting is Medium Set the nightlight timer 1 Press Nightlight is displayed press 2 Press to display Timer and press 3 Press Or to display either 5 min 10 min 15 min or Constant and press to select The display will show Saved briefly and you ll hear a confirmatio
24. provider Oricom will not be liable for any damages caused by the product or the failure of the product to perform including any lost profits or savings or special incidental or consequential damages Oricom is not liable for any claim made by a third party or made by you on behalf of a third party This limitation of liability applies whether damages are sought or a claim made under this Warranty or as a tort claim including negligence and strict product liability a contract claim or any other claim However this limitation of liability will not apply to claims for personal injury Nothing in this Warranty excludes restricts or modifies any condition warranty right or remedy which pursuant to the Competition and Consumer Act 2010 applies to this Warranty and which may not be so excluded restricted or modified For warranties that cannot be excluded restricted or modified Oricom limits the remedies available to those specified in the relevant legislation Oricom products come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Qricom Contact Details for Oricom support and Warranty claims in Australia Oricom International Pt
25. s are now ready to use Switch the Baby unit off 1 Press and hold the button on the Baby unit The green Link indicator will switch off Switch the Parent unit off 1 Press and hold the button on the Parent unit until an audible alert sounds The green Link indicator will switch off and the display will go blank 20 USING YOUR DIGITAL BABY MONITOR Baby sound level LED indicators LEDs 1 2 Green LEDs 3 4 Green LEDs 5 7 Red or Amber if Mute Low is on cw Link Mute gt The seven LEDs across the top of the Parent unit light up to indicate the level of sound being received from the Baby unit The LEDs light up progressively as the sound increases LEDs 1 2 light up Green or Amber if Mute Low is on see page 18 when sounds of 57dB and 63dB are received LEDs 3 4 light up Green when sounds of 69dB and 7588 are received LEDs 5 7 light up Red when sounds of 83dB 89dB or 95dB are received Equivalent sound level examples 60dB 70dB normal conversation 75dB loud conversation 83 95dB loud traffic noise USING YOUR DIGITAL BABY u e 21 Adjust the loudspeaker volume At the Parent unit 1 Press to select the required level The first press will show the current setting There are 5 volume levels and off Mute The volume level will be shown on the display at each press e g Level 3 is shown as Volume mmm If you wish to switch the volume off keep pressing until th
26. se receipt and attach to the back page of this user guide as you will need to produce this if warranty service is required Take a few moments to register your product online www oricom com au WARRANTY 41 How to make claim under Warranty in Australia Oricom has a simple warranty process for you to follow Please call or email our Customer Support Team contact details follow A Customer Support Team member will verify after troubleshooting with you if your product qualifies under warranty If so they will give you a Product Return Authorisation number We will then email or fax a Return Authorisation form and a Repair Notice if necessary together with instructions on how to return the goods for warranty service Please note that if a Customer Support Team member advises that your product does not qualify for return this warranty does not apply to your product Products that are authorised to be returned to Oricom in Australia must include all of the following e A completed Return Authorisation form A copy of your Proof of Purchase please keep your original copy The faulty product including all accessories Send the approved returns to Oricom International Pty Ltd Locked Bag 658 South Windsor NSW 2756 Australia Please note that this warranty excludes expenses incurred by you in returning any faulty product to us You must arrange and pay any expenses incurred including postage delivery freight transportation
27. t of its choosing that is at least equivalent to your product in performance Oricom does not warrant that the operation of the product will be uninterrupted or error free Oricom is not responsible for damage that occurs as a result of your failure to follow the instructions that came with the product These terms and conditions together with any specific terms and conditions contained in the user guide to the product purchased constitute the complete and exclusive agreement between you and Oricom regarding the product No change to the conditions of this Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom Oricom will not be in breach of a warranty expressly set out in this User Guide or under the Competition and Consumer Act 2010 and excludes any liability for damages or any other remedy arising under any other legislation or the common law if the damage occurs as a result of fA ala EAM 5 1 failure by you to adhere to the warnings and follow the instructions set out in this user guide for the proper installation and use of the product 2 negligence on your part or misuse by you of the product 3 an uncontrollable external cause which results in the product not functioning including but not limited to power failure lightning or over voltage and 4 modification to the product or services carried out on the production by anyone other than Oricom or Oricom s authorised service
28. t the Baby unit 1 Within 3 seconds of the Baby unit being switched on press the button for at least 10 seconds You will hear a confirmation beep once the reset has been performed Should you experience difficulties operating the 5 510 please refer to the troubleshooting guide below If you still experience difficulties please contact Oricom Customer Support on 1300 889 785 for assistance Troubleshooting Problems Solutions Link light does not Check that both the Baby and Parent units are come on switched on Check that the batteries in the Parent unit are correctly installed and that they are charged Check that the mains power is plugged in and switched on at the Baby unit Check that the units are within range of each other f you have pressed to use the Talk Back feature the Link light will flash to indicate one way communication between the units The units are searching for a communication link Check units are within range of one another Check both units are turned on Link indicator is The link between your units is broken You will also flashing red hear an alert on the Parent unit to let you know there is no communication between the units If this happens check that the mains power or batteries is correctly connected and that the units are within range of one another See page 17 for instructions on linking the units Link light is fl
29. tUp is displayed press Crying Alert is displayed press until Backlight is displayed and press Use the and buttons to display either w alerts or Off w alerts and press to select The display will show Saved and you will hear a confirmation beep N List of tones Your Baby Monitor unit can produce various tones They have the following meaning Single tone Confirmation tone e g setting saved Double tone fast Error tone e g max volume reached when adjusting volume Double tone slow User alert e g crying alert paging alert etc Triple tone fast System alert e g link lost battery low etc USING YOUR DIGITAL BABY MONITOR fey User Alert tones can be silenced by pressing any button on the Parent unit System Alerts can be silenced for a 5 minute period by pressing any button on the Parent unit Reset the units Resetting either units will return the settings at that unit back to its default settings Resetting the units is only advisable if you are experiencing difficulties with your product It is a useful feature that ensures your Baby Monitor is returned to its new out of the box settings Reset the Parent unit 1 Within 3 seconds of the Parent unit being switched on press and hold the button for at least 10 seconds The display will show Reset for 2 seconds during the reset and then you will hear a confirmation beep once the reset has been performed Rese
30. the socket marked 3 on the back of the Baby unit and plug the other end into the mains power and switch on 17 Switch on and link the Parent and Baby units 1 Press and hold the button on the Baby unit for 1 second The nightlight will briefly illuminate and then the green Link indicator will flash 2 Press and hold the button on the Parent unit until all the LEDs on the unit briefly illuminate The green Link indicator will flash and the display will show I m Linking Warning Never use non rechargeable batteries in the Parent unit Only use the recommended type 2 x AA NiMH 1300mAnh batteries Using other types could permanently damage the unit Charge the batteries as instructed in this user guide The Parent unit can still be used when it is in the charger Removing the batteries If you ever need to remove the batteries simply slide open the battery compartment cover and use the ribbon to eject the batteries Once the units are Linked the green Link light on the top of the Parent unit and the green LED on the Baby unit will stop flashing and remain a steady green The units are now ready to use IMPORTANT The link confirmation between the two units is vital for use so they can communicate If the link between the units is broken at any time the Link indicators on both units will flash green as they try to search for each other The Parent unit displays I m Linking After 30 seconds if t
31. tiate parental talk back r 12 75 iios k of Baby unit ORICOM DIGITAL BABY MONITOR Parent unit menu map Turn On Off High Medium Low Nightlight Brightness Choose Song B pr 5 10 min Constant Start Stop Timer Duration Set Time Feed Timer 5 rm Repeat Timer Repeat L Repeat Timer Alert r Beep T Beep amp Vibe Crying Alert Vibrate _ Screen only Temp Alert Backlight m On w alerts Off w alerts 5 min 10 min 15 min Constant 3 Blind Mice Brahms Canon in D Dream Chase Dreaming Hush Baby Night Night Twinkle Star Play All Beep Beep amp Vibe Vibrate Beep Beep amp Vibe Vibrate Screen only Off 14 ANCE Parent unit r es DC7 5V LA T PULL Rechargeable batteries already fitted Remove this tab and charge batteries for16 hours before use 3 Place the Parent unit into the charger The red charging light will illuminate on the charger and the battery icon will start scrolling on the Parent until display to indicate that the batteries are being charged Low battery indicator Battery icon Charging light Leave the batteries to charge for 16 hours to reach maximum charge When the batteries are fully charged the battery ico
32. y Ltd Locked Bag 658 South Windsor NSW 2756 Australia Email support oricom com au Phone 1300 889 785 Monday to Friday 8am to 6pm AEST Web www oricom com au Fax 02 4574 8898 Contact details for Oricom Support and Warranty Claims in New Zealand Email support oricom co nz Phone 0800 674 266 Monday to Friday 10am to 8pm NZST Web www oricom co nz Q rico fn Ref 0709201 1
Download Pdf Manuals
Related Search