Numark Industries DM3002X Musical Instrument User Manual
Contents
1. channel 2 is selected on both sides the crossfader will turn off channel 2 in the left position and turn it on in the right position Note The crossfader is user replaceable in case of failure Simply unscrew the two large screws that hold it in place lift it out and disconnect its cable Re attach the new crossfader and screw the mounting plate back onto the unit you re back in business Beat Lights Indicate when strong bass beats are present to allow more accurate beat mixes Push Button transforms DM3002X By pressing these button the crossfader channel will respond as determined by the transform assign Transform Assign DM3002X only IN When active the transform button will punch in the channel assigned regardless of crossfader position When punching in the opposing channel will be eliminated OUT _ When active transform button will eliminate audio assigned KILL switches DM3002X only By moving these toggle down or up the marked frequency area will be removed For instance is BASS is pressed the bass beat will be removed Highs might remove cymbals and middle might remove vocals Fader Start DM3002X only activates the crossfader to send play and cue commands to your auto start Numark CD player or other popular brand For fader start attach your mixer to a remote start CD player using industry standard 1 8 3 5mm cables When you move the crossfader toward the active channel the attached CD play2. from one jurisdiction to another RETURN INFORMATION A Return Authorization number must be obtained from Numark through the address or phone numbers below A copy of the original sales receipt must also be included for the equipment to be repaired under warranty The faulty equipment must be packed in its original packaging One additional outer layer of packaging must be included to ensure product safety Failure to do so may inadequately protect the equipment in transit and therefore jeopardize the customer s warranty Numark will not accept COD shipments and no call tags will be issued for merchandise return Numark will not return repaired merchandise to customers by priority service unless by written request at the customer s cost Requests must be submitted in writing with merchandise returned g The defective Numark equipment should be sent FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and original sales receipt enclosed to gt Numark INDUSTRIES Attention Service Department Phone 1 401 295 9000 11 Helmsman Avenue Fax 1 401 295 5200 North Kingstown RI 02852 USA Web www numark com
3. the PFL audio can be heard in your left ear and PGM audio can be heard in your right ear In blend mode both PFL and PGM can be heard in both ears Headphone output for your 1 4 or 1 8 headphones OUTPUTS 15 16 Master Fader controls the overall output level Panning controls output to the left and right speakers By rotating left only the left speaker will be heard By rotating right only the right speaker will be heard DM3000X DM3002X CROSSFADER 17 18 19 20 21 22 23 24 25 Crossfader achieves clean segues between the two input channels selected by the Crossfader Assign Crossfader Slope determines how quickly the audio from the opposing side of the crossfader activates A tight curve right position turns on the opposing audio signal with very little crossfader movement A loose curve left position makes very long and smooth segues in transition Hamster switch with Off position reverses the direction of the crossfader In the center position the crossfader is deactivated Crossfader Assign channels or 2 can be assigned to the left Channels 2 and 3 can be assigned to the right If for example channels 1 and 3 were selected then Hard left selects Channel 1 and Hard right selects Channel 3 With the crossfader centered both assigned channels are live Use the crossfader for fast and seamless segues from one selected channel to the other Note If
4. 11 rms sensitivity for 1 22V output 65mV rms max input Phono 47Kohm input impedance 1 3mV rms sensitivity 1KHz for 1 22V output Outputs Line 9V rms max Headphone 0 5W into 47ohm Distortion less than 0 01 Signal to Noise Ratio maximum output JIS A weighted Line Better than 92dB Mic Better than 82dB Phono Better than 85dB Frequency response Line 20Hz 20KHz 0 5dB Mic 20Hz 15KHz 0 5dB Phono 1dB except for controlled attenuation of 3dB 20Hz to reduce rumble and feedback Channel equalizer Bass 12 32dB 40Hz Middle 12 32dB 1 35KHz Treble 10 28dB 15KHz Channel Kill DM3002X only Bass Better than 80dB at 40Hz Middle Better than 80dB at 1KHz Treble Better than 80dB at 15KHz Power consumption 16 7 Watt typical 21 2 Watt with full headphone output Dimensions 254mm W x 355mm D x 90mm H Weight 3 5 kgs Numark The Leader in DJ Technology 2001 Numark Industries 11 http www numark com Numark Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long 1 NUMARK INDUSTRIES LCC NUMARK warrants to the original purchaser that NUMARK products including but not limited to DJ mixers amplifiers CD players CD Mix Stations turntables preamplifiers beatkeepers equalizers microphones headphones cartridges and all other accessories are to be free from defects in material and workmanship under normal use and service for th
5. ARRANTY IS THE COMPLETE WARRANTY FOR NUMARK S MIXERS AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER S EXCLUSIVE REMEDY IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS This Limited Warranty allocates risk of product failure between purchaser and NUMARK and NUMARK S product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty The agents employees distributors and dealers of NUMARK are not authorized to make modifications to this Limited Warranty or make additional warranties binding on NUMARK Accordingly additional statements such as dealer advertising or presentation whether oral or written do not constitute warranties by NUMARK and should not be relied upon How does state law apply to this warranty SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER This Limited Warranty gives you specific legal rights You may also have other rights which vary
6. Numark Professional Disc Jockey Products DM3000X DM3002X DJ MIXERS 1 eee 1 amp ee ii see kite Owner s Manual 2001 Numark industries http www numark com DM3000X DM3002X Safety Information AN CAUTION RISK OF ELECTRIC SHOCK CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanvina this appliance CAUTION FOR USA amp CANADIAN MODELS ONLY TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE SAFETY INSTRUCTIONS a b 5 Read Instructions All the safety and operating instructions should be read before this product is connected and used Retain Instructions The safety and operating instructions should
7. be kept for future reference Heed Warnings All warnings on this product and in these operating instructions should be followed Follow Instructions All operating and other instructions should be followed Water and Moisture This product should be kept away from direct contact with liquids Heat Avoid placing this product to close to any high heat sources such as radiators Ventilation The appliance should be situated so that it s location or position does not interfere with it s proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation opening or placed in a built installation such as bookcase or cabinet that may impede the flow of air through the ventilation openings h k D m n Power Sources This product should be connected to power supply only of the type described in these operating instructions or as marked on the unit Power Cord Protection Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord Object and Liquid Entry Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer Cleaning The appliance should be cleaned only as rec
8. e period commencing upon the date of purchase from an authorized NUMARK dealer for a period of 1 Year What is not covered This Limited Warranty is conditioned upon proper use of the product by the purchaser 2 This Limited Warranty does not cover a defects or damage resulting from accident misuse abuse neglect unusual physical or electrical stress modification of any part of the product or cosmetic damage b equipment that has the serial number removed or made illegible c all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use d defects or damage from improper testing operation maintenance installation adjustment or service of the mixers crossfaders What NUMARK S obligations During the applicable warranty period NUMARK will repair or replace at NUMARK S sole discretion without charge to the purchaser any defective component part of the mixer To obtain service under this Limited Warranty purchaser must first contact NUMARK and obtain a return authorization number RA Purchaser must then return the mixer to NUMARK in an adequate container for shipping accompanied by purchaser s sales receipt or comparable proof of sale showing the date of purchase the serial number of the product and the seller s name and address To obtain an RA and assistance on where to return the mixer contact NUMARK customer service at 401 295 9000 Upon receipt NUMARK will repa
9. er will start When it is moved away that side will cue similar to pressing the cue button OTHER ITEMS 26 27 28 Stereo Auto Peak Hold Level Indicator quickly and accurately tracks level of audio output The red LEDs show output overload When using as a master output meter set the crossover equalizer and power amp inputs to avoid distortion at each step in the audio chain Power Switch Actives mixer power Always turn on input devices first the mixer second and amplifiers last Light Connector for attaching a 12V BNC style gooseneck light Numark The Leader in DJ Technology 2001 Numark Industries ATA http Awww numark com DM3000X DM3002X REAR PANEL FEATURES at TS 10 Power Input to plug your power plug in before switching on power See safety precautions on page 3 for proper treatment of power Voltage Selector Set this to the appropriate power for your location If unsure ask your authorized dealer Phono Inputs plug your turntables in here Ground lug use these connections with your turntables grounding cable to avoid signal hum Line Inputs to connect stereo audio from HiFi VCRs cassette and reel to reel tape decks DAT machines CD players laser discs tuners even synthesizers or other mixing consoles NOTE Plug mono audio sources into both Left and Right inputs using a cable connector Channel Process DM3002X only The output is det
10. ermined by pushing the front panel process selectors next to each channel The post fader signal is sent to the send output The send should then be plugged into your external processor Plug you processor return into the Return input Set the output level of you processor to match the signal it receives from the send to ensure smooth activation With proper level adjustment you can create smooth transitions between processed and unprocessed signal Note this mixer was design to use one processor for many channels If more than one channel is selected than the signal will bleed across the channels This can be a desired effect if you wish to blend wet a dry signal Sent signal is captured after the PFL gain and prior to EQ and Pan adjustments allowing the user total control of the processed signal Channel PFL Send _ this output contains the PFL signal you hear in your headphones The send should be plugged into your sampler and the signal returned through one of your inputs Record Outputs Plug in your tape deck to record your mix Audio level is determined by the channel inputs Unbalanced Main Outputs program output controlled by the Master fader knob Fader Start Connector DM3002X only _ to attach your mixer to a remote start equipped Numark CD player using industry standard 1 8 3 5mm cables The fader start is design to work with all digital pulse style industry standard CD players Numark The Leader in DJ Technology 2001 Numa
11. ients which may cause severe speaker damage Use restraint when operating controls Try to move them slowly Rapid adjustments could damage speakers due to amplifier clipping Avoid amplifier clipping at all costs this occurs when the red LEDs usually on the front panel of most professional power amplifiers start flashing Clipping is when the power amplifier is distorting and working beyond it s limits Amplifier distortion is THE major cause of speaker failure prevent fire or shock hazard do not expose the unit to rain or moisture Never place cans of beer soda glasses of water or anything wet on top of the unit Product Registration Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit Retain this information and your original purchase receipt for your records Please return the enclosed warranty card to register your unit with us MODEL PURCHASED FROM SERIAL NUMBER DATE OF PURCHASE Numark The Leader in DJ Technology 2001 Numark Industries 3 http www numark com DM3000X DM3002X Numark DM3000X DM3002X PROFESSIONAL DJ MIXERS CONGRATULATIONS You have purchased the DM3000X DM3002X Stereo Mixer by Numark This mixer was developed by DJs for you combining requested features in an easy to understand layout Using the latest in circuit design technology and our history of award wi
12. ion Registration Introduction Description of the Features Quick Setup Diagram Block Diagram Specifications Warranty 2001 Numark Industries Numark The Leader in DJ Technology DM3000X DM3002X 10 11 12 http Awww numark com DM3000X DM3002X 26 Oo Oe O 20 1 Numark The Leader in DJ Technology 2001 Numark Industries 6 http www numark com MIXER FEATURES INPUTS 1 2 Input faders control individual source levels in the mix Input Toggle Switch Transform selects which source will be live to that channel based on what you have connected to the rear panel input section By removing the face panel the switch can be rotated into any of eight positions Pre fader Gain Control adjusts the pre fader volume for cleaner sound Use this in conjunction with the PFL Meter to adjust the audio to an optimum level Channel EQ adjusts the Treble Middle and Bass frequencies respectively of the channel audio Full rotation to the left creates a CUT effect eliminating most of the sound from that frequency area Process Loop DM3002X only _ activates the external process loop to the channel selected Note All process loops go to the same output and return By pressing process on two channels a
13. ir or replace the defective products NUMARK may at NUMARK S sole discretion use rebuilt reconditioned or new parts or components when repairing any product or replace a product with a rebuilt reconditioned or new product Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for 90 days whichever is longer All replaced parts components boards and equipment become the property of NUMARK If NUMARK determines that any mixer is not covered by this Limited Warranty purchaser must pay all parts shipping and labor charges for the repair or return of such mixer What are the limits on NUMARK S liabilities THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL INCIDENTAL CONSEQUENTIAL INDIRECT OR SIMILAR DAMAGES LOSS OF PROFITS DAMAGES TO PURCHASER S PROPERTY OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE MISUSE OR INABILITY TO USE ANY NUMARK MIXER BREACH OF WARRANTY OR NEGLIGENCE INCLUDING BUT NOT LIMITED TO NUMARK S OWN NEGLIGENCE EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY THIS LIMITED W
14. nning development experience you can expect years of reliable service from this product Careful attention to detail was provided in this unit The DM3000X DM3002X even has smooth edges to ensure your fingers don t get caught up in the mix We hope you enjoy the Numark experience Thank you for purchasing NUMARK products FEATURES CROSSFADER Crossfader Reverse Hamster Toggle with off position Variable Slope Control Channel Assign selectors Fader Start DM3002X only Transform Buttons w action assignment DM3002X only Treble Middle and Bass KILL toggle DM3002X only INPUTS 3 line 3 phono 1 input Front Panel 1 4 Mic input with Bass and Treble controls Rotary Bass Middle amp Treble 32dB CUT and 10dB Boost PFL cue monitoring with send out for sampling PFL Gain Adjust Individual PFL meters DM3002X only Process insert looping on all channels including microphone DM3002X only MONITORING Two Bar 12 Segment Display graph for Stereo Master output Split Blend Cue selection Push Button Cueing Headphone Jacks for Both 1 4 and 1 8 Headphone Plugs OUTPUTS Monitor Zone Level Control Record output PFL sampling output Process Loop IN OUT DM3002XX only Fader Start DM3002X only Numark The Leader in DJ Technology 2001 Numark Industries http Awww numark com Safety Measures TABLE OF CONTENTS Important Informat
15. ommended by the manufacturer Non use Periods The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time Damage Requiring Service Only qualified a a should service this product If you have any questions about service please contact Numark at the number s shown on the back cover of this manual Grounding or Polarization Precautions should be taken so that the grounding or polarization means built into the CD player is not defeated Internal External Voltage Selectors Internal or external voltage selector switches if any should only be reset and re equipped with a proper plug for alternative voltage by a qualified service technician Do not attempt to alter this yourself WARNING To reduce the risk of fire or electrical shock do not expose this appliance to rain or moisture Electrical equipment should NEVER be kept or stored in damp environments SERVICE INSTRUCTIONS Disconnect power cord before servicing Replace critical components only with factory parts or recommended equivalents For AC line powered units Before returning repaired unit to user use an ohmmeter to measure from both AC plug blades to all exposed metallic parts The resistance should be no more than 100 000ohms Numark The Leader in DJ Technology 2001 Numark Industries http Awww numark com DM3000X DM3002X VERY IMPORTANT Please read this entire manual bef
16. ore connecting this unit to your system For optimum performance The crossfader is a user replaceable item and subject to wear Excessive force can wear out the fader quickly This is not a warranted item Never use spray cleaners on the slide controls Residues cause excessive dirt build up and this will void your warranty In normal use slide controls can last for many years If they malfunction usually because of a dirty or dusty environment consult a professional technician Always make sure that AC power is OFF while making any connections Use appropriate cables throughout your system Do not use excessively long cables i e over 50ft 14m Be sure plugs and jacks are tightly mated Loose connections can cause hum noise or intermittents that could easily damage your speakers Make the input and output connections with readily available low capacitance stereo cables Quality cable makes a big difference in audio fidelity and punch See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get Never attempt to make any adjustments or repairs other than those described in this manual Take the unit to your dealer or to an authorized Numark Service Center ALWAYS remember TURN AMPS ON LAST AND OFF FIRST Begin with master faders or volume controls on minimum and the amplifier gain input control s down Wait 8 to 10 seconds before turning up the volume This prevents trans
17. rk Industries 8 http www numark com QUICK SETUP DIAGRAM DM3000X DM3002X Study this setup diagram Make sure all faders are at zero and all devices are off First connect all input sources and processors Next connect your microphone and monitor headphones Finally connect the stereo outputs to the power amplifier s and or audio receivers such as tape decks Plug your mixer into AC power Now you are ready to switch everything on IMPORTANT Always switch on your audio input sources such as turntables or CD players first then your mixer and finally any amplifiers When turning off always reverse this operation by turning off amplifiers then your mixer and then input devices AC Outlet F Main Unbalanced wn 5 69 lt D 3 Digital Sampler S23 Turntable 1 gt Turntable 2 Turntable 3 OOO OO gt OOO OO OOO External Mixer O j Numark The Leader DJ Technology 9 http Awww numark com 2001 Numark Industries DM3000X DM3002X BLOCK DIAGRAM Numark The Leader in DJ Technology 2001 Numark Industries 10 http www numark com DM3000X DM3002X SPECIFICATIONS Inputs Line 10K ohm input impedance 83mV rms sensitivity for 1 22V output Mic 600 ohm input impedance unbalanced 11
18. t the same time the audio will bleed through to the each channel Only use one process loop at a time PFL Meter DM3002X only used to adjust the PFL levels accurately match channel levels with the Pre fader gain controls before mixing them together The idea is to properly match PFL inputs not the input with the stereo output meter MICROPHONE Ts Mic Gain Controls controls the DJ Mic volume for the Neutrik Combo connector on the front panel Treble and Bass Controls _ for fine tuning the tone of your voice on both mics through the sound system The controls are detented for setting tone flat For best results use a dynamic cardioid microphone input connector allows connection of a 1 4 microphone jack directly into the mixer HEADPHONE CUEING 10 11 12 13 14 Channel Cue Assign are used to route Pre Fader Level PFL channel audio to the Monitor Section The channel faders do not control the Cue volume Headphone Mix controls the mix of PFL and PGM signals to your headphones When the slider is moved to the left all you will hear is the cue source When the slider is all the way to the right you will hear what is playing through the master output By blending beats can be matched exactly and segues can be smooth when a song is cued Headphone Level adjusts cue volume Split Blend Cue controls how PFL and Program audio are sent to your headphones In split mode
Download Pdf Manuals
Related Search