Home

Nokia N76 Cell Phone User Manual

1. 119 TOON E E E 95 MiX 122 For your safety Read these simple guidelines Not following them may be dangerous or illegal Read the complete user guide for further information fi D gt gt gt SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger ROAD SAFETY COMES FIRST Obey all local laws Always keep your hands free to operate the vehicle while driving Your first consideration while driving should be road safety INTERFERENCE All wireless devices may be susceptible to interference which could affect performance SWITCH OFF IN HOSPITALS Follow any restrictions Switch the device off near medical equipment SWITCH OFF IN AIRCRAFT Follow any restrictions Wireless devices can cause interference in aircraft HS ASS S D SWITCH OFF WHEN REFUELING Do not use the device at a refueling point Do not use near fuel or chemicals SWITCH OFF NEAR BLASTING Follow any restrictions Do not use the device where blasting is in progress USE SENSIBLY Use only in the positions as explained in the product documentation Do not touch the antenna areas unnecessarily QUALIFIED SERVICE Only qualified personnel may install or repair this product ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries Do not connect incompatible products WATER RESISTANCE Your device is not water resistant Keep it dry B
2. If Ask on connection is set to off or you want to change the mode during an active connection select USB mode and from the following Media player to synchronize music with Windows Media Player See Music transfer with Windows Media Player p 24 PC Suite to use to use the data cable connection for the Nokia Nseries PC Suite Data transfer to transfer data between your device and a compatible PC Image print to print images on a compatible printer See Image print p 41 PC connections You can use your device with a variety of compatible PC connectivity and data communications applications With Nokia Nseries PC Suite you can for example transfer images between your device and a compatible PC Always create the connection from the PC to synchronize with your device Synchronization CA Sync enables you to synchronize your notes calendar text messages or contacts with various compatible applications on a compatible computer or on the internet You may receive synchronization settings in a special message See Data and settings p 72 In the Sync main view you can see the different synchronization profiles A synchronization profile contains the necessary settings to synchronize data in your device with a remote database on a server or compatible device 1 Press and select Tools gt Sync 2 Select a synchronization profile and Options gt Synchronise To cancel synchronization b
3. When connecting any external device or any headset other than those approved by Nokia for use with this device to the Nokia AV Connector pay special attention to volume levels Lp Warning When you use the headset your ability to hear outside sounds may be affected Do not use the headset where it can endanger your safety To use a headset or headphones with a compatible remote control unit for example the Nokia Audio Controller AD 43 connect the unit to the connector in the device then to the headset or headphones to the unit Some headsets do not include a microphone For phone calls use such a headset with a remote control unit or the microphone of the device When using certain headset enhancements for example the Nokia Audio Controller AD 43 to adjust the volume during a call use the volume key in the device The Nokia Audio Controller AD 43 has multimedia volume controls that are used to adjust the volume only for music or video playback Memory card Use only compatible microSD cards approved by Nokia for use with this device Nokia uses approved industry standards for memory cards but some brands may not be fully compatible with this device Incompatible cards may damage the card and the device and corrupt data stored on the card misg Keep all memory cards out of the reach of small children Memory card tool i Press and select Tools gt Utilities gt Memory To back up information fr
4. To use the remote SIM mode with a compatible car kit enhancement set Bluetooth connectivity on and enable the use of the remote SIM mode with your device See Settings p 60 Before the mode can be activated the two devices must be paired and the pairing initiated from the other device When pairing use a 16 digit passcode and set the other device as authorized See Pair devices p 61 Activate the remote SIM mode from the other device When remote SIM mode is on in your device Remote SIM is displayed in the standby mode The connection to the wireless network is turned off as indicated by in the signal strength indicator area and you cannot use SIM card services or features requiring cellular network coverage When the wireless device is in the remote SIM mode you can only use a compatible connected enhancement such as a car kit to make or receive calls Your wireless device will not make any calls except to the emergency numbers programmed into your device while in this mode To make calls from your device you must first leave the remote SIM mode If the device has been locked enter the lock code to unlock it first To leave the remote SIM mode press the power key and select Exit remote SIM mode a USB jd Press 3 and select Tools gt Connectivity gt USB To have the device ask the purpose of the USB cable connection each time the cable is connected select Ask on connection gt Yes
5. mailbox To view e mail attachments open the message and select the attachment field indicated by Q If the attachment has a dimmed indicator it has not been retrieved to the device select Options gt Retrieve Retrieve e mail messages automatically To retrieve messages automatically select Options gt E mail settings gt Automatic retrieval For more information see Automatic retrieval p 78 Setting the device to retrieve e mail automatically may involve the transmission of large amounts of data through your service provider s network Contact your service provider for information about data transmission charges Delete e mail messages To delete the contents of an e mail message from the device while still retaining it in the remote mailbox select Options gt Delete In Delete message from select Phone only The device mirrors the e mail headings in the remote mailbox Although you delete the message content the e mail heading stays in your device If you want to remove the heading as well you must first delete the e mail message from your remote mailbox and then make a connection from your device to the remote mailbox again to update the status To delete an e mail from the device and the remote mailbox select Options gt Delete In Delete message from select Phone and server To cancel deleting an e mail from the device and server scroll to an e mail that has been marked to be deleted durin
6. may stop working Refer to the documentation of the installed software package for details Settings Select Options gt Settings and from the following Software installation Select whether Symbian software that has no verified digital signature can be installed Online certificate check Select to check the online certificates before installing an application Default web address Set the default address used when checking online certificates Some Java applications may require a message to be sent or a network connection to a specific access point for downloading extra data or components In the App mgr main view scroll to an application and select Options gt Open to change settings related to that specific application Digital rights management N Content owners may use different types of digital rights management DRM technologies to protect their intellectual property including copyrights This device uses various types of DRM software to access DRM protected content With this device you can access content protected with WMDRM 10 OMA DRM 1 0 and OMA DRM 2 0 If a owners may ask that such DRM software s ability to access certain DRM software fails to protect the content content new DRM protected content be revoked Revocation may also prevent renewal of such DRM protected content already in your device Revocation of such DRM software does not affect the use of content protected with other types of
7. p 82 To change the phone number of your voice or video mailbox press 3 and select Tools gt Utilities gt Call mailbox a mailbox and Options gt Change number Enter the number obtained from your wireless service provider and select OK Make a conference call 1 Make a call to the first participant 2 To make a call to another participant select Options gt New call The first call is automatically put on hold 3 When the new call is answered to join the first participant in the conference call select Options gt Conference To add a new person to the call repeat step 2 and select Options gt Conference gt Add to conference Your device supports conference calls between a maximum of six participants including yourself To have a private conversation with one of the participants select Options gt Conference gt Private Select a participant and select Private The conference call is put on hold on your device The other participants can still continue the conference call After you finish the private conversation select Options gt Add to conference to return to the conference call To drop a participant select Options gt Conference gt Drop participant scroll to the participant and select Drop 4 To end the active conference call press Speed dial a phone number To activate speed dialing press and select Tools gt Settings gt Phone gt Call gt Speed dialling gt On To assig
8. Image quality Print 2M Large 1600x1200 resolution Print 1M Medium 1152x864 resolution or MMS 0 3M Small 640x480 resolution If you want to print the image select Print 2M Large If you want to send it through e mail select Print 1M Medium To send the image through MMS select MMS 0 3M Small These resolutions are only available in the main camera In the secondary camera the resolution is always MMS 0 3M Small Add to aloum Select whether you want to save the image to a certain aloum in the gallery If you select Yes a list of available aloums opens Show captured image Select On if you want to see the captured image after it is taken or Off if you want to continue taking pictures immediately Default image name Define the default name for the captured images Extended digital zoom main camera only Select On to allow the zoom increments to be smooth and continuous between digital and extended digital zoom If you want to limit the zoom to where the selected image quality is maintained select Off Capture tone Select the tone you want to hear when you take a picture Memory in use Select where to store your images Restore camera settings Select Yes to return the default values to the camera settings Flash The flash is available only in the main camera Keep a safe distance when using the flash Do not use the flash on people or animals at close range Do not cover the flash
9. The video viewfinder displays the following 1 The current capture mode indicator 2 The audio mute on indicator 3 The active toolbar which you can scroll through before recording to select different items and settings the toolbar is not displayed during recording See Active toolbar p 31 4 The total available video recording time When you are recording the current video length indicator also Shows the elapsed time and time remaining 5 The device memory f and memory card ail indicators show where videos are saved 6 The video quality indicator indicates whether the quality of the video is High Normal or Sharing 7 The video clip file type To display all viewfinder indicators select Options gt Show icons Select Hide icons to display only the video status indicators and during the recording the available record time zoom bar when zooming and the selection keys After recording a video After you record a video clip select the following from the active toolbar in the main display available only if Show captured video is set to On in video settings e To immediately play the video clip you just recorded select Play e lf you do not want to keep the video select Delete e To send the video clip using multimedia e mail Bluetooth connectivity or upload it to your online album press the call key or select Send For more information see Messaging p 69 Bluetooth conne
10. When calls are limited to closed user groups calls may be possible to the official emergency number programmed into your device Confirm SIM services You can set the device to display confirmation messages when you are using a SIM card service network service Glossary of PIN and lock codes If you forget any of these codes contact your service provider Personal identification number PIN code This code protects your SIM card against unauthorized use The PIN code 4 to 8 digits is usually supplied with the SIM card After three consecutive incorrect PIN code entries the code is blocked and you need the PUK code to unblock it UPIN code This code may be supplied with the USIM card The USIM card is an enhanced version of the SIM card and is Supported by UMTS mobile phones PIN2 code This code 4 to 8 digits is supplied with some SIM cards and is required to access some functions in your device Lock code also known as security code This code 5 digits can be used to lock the device to avoid unauthorized use The factory setting for the lock code is 12345 To avoid unauthorized use of your device change the lock code Keep the new code secret and in a safe place separate from your device If you forget the code contact your service provider Personal unblocking key PUK code and PUK2 code These codes 8 digits are required to change a blocked PIN code or PIN2 code respectively If the codes are not
11. can be dialed by pressing and holding the key See also Speed dial a phone number p Bd Anykey answer Select On and you can answer an incoming call by briefly pressing any keypad key except n OD and amp Line in use This setting network service is shown only if the SIM card supports two subscriber numbers that is two phone lines Select which phone line you want to use for making calls and sending text messages Calls on both lines can be answered irrespective of the selected line If you select Line 2 and have not subscribed to this network service you will not be able to make calls When line 2 is selected 2 is shown in the standby mode Vly gt 9 lt Tip To switch between the phone lines press and hold inthe standby mode Line change To prevent line selection network service select Disable if supported by your SIM card To change this setting you need the PIN2 code Call divert Call divert allows you to divert your incoming calls to your voice mailbox or another phone number For details contact your service provider Select which calls you want to divert and the desired diverting option To divert voice calls when your number is busy or when you reject incoming calls select If busy Set the option on Activate or off Cancel or check whether the option is activated Check status Several diverting options can be active at the same time When all calls are diverted A is shown in
12. Image Sound clip Video clip Note or Other for other file types E mail attachments are indicated by UJ 8 To send the message select Options gt Send or press ta PS Note Your device may indicate that your message was sent to the message center number programmed into your device Your device may not indicate whether the message is received at the intended destination For Multimedia d Slide 1 1 12 kB Subject Hello Hello Anna more details about messaging services contact your service provider Your device supports the sending of text messages beyond the character limit for a single message Longer messages are sent as a series of two or more messages Your service provider may charge accordingly Characters that use accents or other marks and characters from some language options take up more space limiting the number of characters that can be sent in a single message You may not be able to send video clips that are saved in the mp4 format or that exceed the size limit of the wireless network in a multimedia message X Tip You can combine images video sound and text to a presentation and send it ina multimedia message Start to create a multimedia message and select Options gt Create presentation The option is shown only if MMS creation mode is set to Guided or Free See Multimedia messages p 75 e Inbox receive messages Sy In the Inbox folder f indicates an unread text message
13. Image or Video clip Select the desired file and press Select m To add a new sound clip and replace the original sound clip in the video clip select Options gt Edit gt Change sound and a sound clip To add text to the beginning or the end of the video clip select Options gt Edit gt Add text enter the text you want to add and press OK Then select where you want to add the text Beginning or End Cut video clip You can trim the video clip and add start and end marks to exclude parts from the video clip In the Images amp video folder select Options gt Edit gt Cut To play the selected video clip from the start select Options gt Play J Tip To take a snapshot of a video clip press the edit key To select which parts of the video clip are included in the custom video clip and define the start and end points for them scroll to the desired point on the video and select Options gt Start mark or End mark To edit the start or end point of the selected part scroll to the desired mark and press the scroll key You can then move the selected mark forwards or backwards on the timeline To remove all the marks select Options gt Remove gt All marks To preview the video clip select Options gt Play marked section To move on the timeline scroll left or right To stop playing the video clip press Pause To continue playing the clip select Options gt Play To return back to t
14. display available only if Show captured image is set to On in the still image camera settings e lf you do not want to keep the image select Delete 31 32 e To send the image using multimedia e mail Bluetooth connectivity or upload it to your online album press the call key or select Send For more information see Messaging p 69 Bluetooth connectivity p 59 and Online sharing p 42 This option is not available during an active call You can also send the image to a call recipient during an active call Select Send to caller only available during an active call e To tag images to the Print basket for later printing select Add to Print Basket e To print the picture select Print See Image print p 41 e To return to the viewfinder to capture a new image press _ amp _ or select Back To use the picture as wallpaper in the active standby select Options gt Set as wallpaper To set the image as a call image for a contact select Set as contact call image Still image camera settings There are two kinds of settings for the still image camera Image setup and main settings To adjust Image setup see Setup settings color and lighting p 33 The setup settings return to the default settings after you close the camera but the main settings remain the same until you change them again To change the main settings select Options gt Settings and from the following
15. even if the certificate should be valid check that the current date and time in your device are correct Before changing any certificate settings you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner View certificate details check authenticity You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device To check certificate details scroll to a certificate and select Options gt Certificate details When you open certificate details the validity of the certificate is checked and one of the following notes may be displayed Certificate not trusted You have not set any application to use the certificate See Change the trust settings p 104 Expired certificate The period of validity has ended for the selected certificate Certificate not valid yet The period of validity has not yet begun for the selected certificate Certificate corrupted The certificate cannot be used Contact the certificate issuer Change the trust settings Before changing any certificate settings you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner Scroll to an
16. select Options gt Default printer To select the paper size select Paper size the size of paper from the list and OK Select Cancel to return to the previous view lt 42 Print online With Print online you can order prints of images online directly to your home or to a store where you can pick them up The available products depend on the service provider To use Print online you must have at least one printing service configuration file installed The files can be obtained from printing service providers that support Print online For more information on the application see the guides for your device at www nseries com support or your local Nokia website Online sharing With Online share you can share images and video clips in compatible online aloums weblogs or in other online sharing services on the web You can upload content save unfinished posts as drafts and continue later and view the content of the aloums The supported content types may vary depending on the service provider To use Online share you must subscribe to the service with an online image sharing service provider and create a new account You can usually subscribe to the service on the web page of the service provider Contact your service provider for details on subscribing to the service For more information on compatible service providers see the product support pages at www nseries com support or your local Nokia we
17. select Options gt Use _ secondary camera To zoom in or out press g or take a picture press the scroll key To leave the camera open in the background and use other applications press 3 To return to the camera press and hold the capture ee Still image camera indicators The still image camera viewfinder main display displays the following 1 The current capture mode indicator 2 The active toolbar which you can scroll through before capturing the image to select different items and settings the active toolbar is not displayed during image capture See Active toolbar p 31 3 The image resolution indicator indicates whether the quality of the image is Print 2M Large Print 1M Medium or MMS 0 3M Small Activate 4 The image counter displays the estimated number of images you can capture using the current image quality setting and memory in use the counter is not displayed during image capture 5 The device memory mH and memory card fi indicators show where images are saved Active toolbar Active toolbar provides you with shortcuts to different items and settings before and after taking a picture or recording a video If you are using the cover display as a viewfinder press B to display the active toolbar Use the volume keys to scroll to the item you want To select it press gt fI If you are using the main display as a viewfinder scroll to the item you want T
18. you can also use the phone number of the recipient including the country code for example 358 to share video if supported by the wireless service provider UMTS connection settings To set up your UMTS connection do the following e Contact your service provider to establish an agreement for you to use the UMTS network e Ensure that your device UMTS access point connection settings are configured properly For help see Connection p 107 Share live video or video clip 1 When a voice call is active select Options gt Share video gt Live video To share a video clip select Options gt Share video gt Recorded clip A list of video clips saved on the device memory or compatible memory card opens Select a clip you want to share To preview the clip select Options gt Play 2 Ifyou share live video your device sends the invitation to the SIP address you have added to the contact card of the recipient If you share a video clip select Options gt Invite You may need to convert the video clip into a suitable format to be able to share it Clip must be converted for sharing Continue appears Select OK If the contact information of the recipient is saved in Contacts and the contact has several SIP addresses or phone numbers including the country code select the desired address or number If the SIP address or phone number of the recipient is not available enter the SIP address or the phone number of the
19. 48 Profiles sef TOMES ensinan 48 Change the look of your device ou sessssseseesestestesesseseeees 49 Active standby MOQE viinsesicscectctceseainveadsareciscneteeiaeneets 50 Web browser asssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 52 Connection SECUPILY ssssuscssansein i 52 Bookmarks VIEW ssiciisiisissradisusisinidiississoranisi tansia 52 Browse the We Dsi ret ecient 53 End CONNECT enone rn a ni 56 SMM S PAE E E EAE OE E E teats case Connections Connection Manager sssini rsseairtiinansiias 59 BIMETOOLN CONMECLIVINY sce tiatiiarwicarativen 59 UGE aaar a 62 PE CONMECUIONS ieina et atnemaaeniientad 63 SV CM NOMIZ AON ceuctevestesisateavemnancrmstenuersosuensoronncecones 63 Device MAMA CN sciis 63 NOW AG fy essre eaS 65 Settings for Download bessies 65 Time management sssnsrsunirinenaennanusanin 67 OC O E EE A EA A S 67 Fe na E 67 Messaging ssssssunnsnnunnnunnnnunnnnnnnnnnnnnnnnnnnnn nn 69 KEE OU center tet mete tener mere cme rte 70 Write and send MeESSagesS shes cescnsntecaspactetataaseenseancreevnaniincs 70 Inb x receive MESSagES wvaaessrsstencnsctasies mrtvrcaroempetennsss 71 DVN OOM aiaee T 73 View messages ON a SIM card eecssseeseseesesseseeesteseees 74 Messaging Setting S tecesesccicseserssaasssesecnscuenstiastecatenscesariatstss 75 IM instant messaging sscsecsssecsecessestesesseeseseeseseeseeneess 79 UE Gan Co i ee eae 80 A VOCE CAINS erare SO 1Application Manager csser 95 Video NS esea 8
20. 50 settings 101 D data cable 62 data call settings 109 data connections details 59 ending 59 establishing 108 indicators 17 network 8 107 settings 107 date 67 delivery reports 76 device manager 63 dictionary 70 digital rights management 97 DRM See digital rights management E edit key 14 editing images 42 e mail automatic retrieving 74 deleting mailbox 76 deleting messages 74 opening 73 74 remote mailbox 73 retrieving from mailbox 73 saving 79 sending 70 settings 76 viewing attachments 74 writing 70 enhancement settings 101 exposure compensation 33 F file formats gp 29 jad 95 jar 95 96 mp4 29 Sis 95 music player 21 RealPlayer 27 file manager 19 fixed dialing 91 FM radio 25 fold closed mode 13 fold open mode 14 font size 100 G gallery active toolbar 39 editing images 42 free memory 40 images and videos 35 38 ordering files in albums 40 42 presentations 47 print basket 40 printing images 41 slide show 46 GPRS See data connections GPS positioning 99 H hands free operation See oudspeaker headset 18 help application 11 l idle sceen See standby mode images See gallery indicators essential 17 still image camera 30 video capture 36 installing applications 95 instant messaging 79 internet See web internet access points IAP See access points J Java 95 K keyguard 18 102 keypad lock 18 102 keys 14 L language settings 101 LED 18 101 lig
21. DRM or the use of non DRM protected content Digital rights management DRM protected content comes with an associated activation key that defines your rights to use the content If your device has OMA DRM protected content to back up both the activation keys and the content use the backup feature of Nokia Nseries PC Suite Other transfer methods may not transfer the activation keys which need to be restored with the content for you to be able to continue the use of OMA DRM protected content after the device memory is formatted You may also need to restore the activation keys in case the files on your device get corrupted If your device has WMDRM protected content both the activation keys and the content will be lost if the device memory is formatted You may also lose the activation keys and the content in case the files on your device get corrupted Losing the activation keys or the content may limit your ability to use the same content on your device 97 98 again For more information contact your service provider Some activation keys may be connected to a specific SIM card and the protected content can be accessed only if the SIM card is inserted in the device To view the digital rights activation keys stored in your device press 5 and select Applications gt Media gt Actv keys and from the following Valid keys View keys that are connected to one or more media files and keys whose validity period has n
22. GY is displayed To play the presentation select the indicator Data and settings Your device can receive many kinds of messages that contain data such as business cards ringing tones operator logos calendar entries and e mail notifications You may also receive settings from your service provider or company information management department in a configuration message To save the data from the message select Options and the corresponding option Web service messages Web service messages are notifications for example news headlines and may contain a text message or a link For availability and subscription contact your service provider Mailbox Ja E mail settings SK Tip Use Settings Wizard to define your mailbox settings Press 3 and select Tools gt Utilities gt Sett wizard To use e mail you must have a valid internet access point IAP in the device and define your e mail settings correctly See Access points p 108 If you select Mailbox in the Messaging main view and have not set up your e mail account you are prompted to do so To start creating the e mail settings with the mailbox guide select Start See also E mail p 76 You must have a separate e mail account Follow the instructions given by your remote mailbox and internet service provider ISP When you create a new mailbox the name you give to the mailbox replaces Mailbox in the Messaging main view You can have up to
23. Positioning For Date and time see Clock p 67 Personalisation To edit settings related to the display standby mode and general functionality of your device press and select Tools gt Settings gt General gt Personalisation Tones allows you to change the tones of calendar clock and the currently active profile Themes opens the application See Change the look of your device p 49 Voice comms opens the settings for the application See Voice commands p 98 Display Brightness Press fe the display or to adjust the brightness of Font size Adjust the size of the text and icons on the display Power saver time out Select the time out period after which the power saver is activated Welcome note logo The welcome note or logo is displayed briefly each time you switch on the device Select Default to use the default image Text to write a welcome note or Image to select an image from Gallery Light time out Select a time out after which the backlight of the display is switched off Standby mode Active standby Use shortcuts to applications in the standby mode See Active standby mode p 50 Shortcuts gt Left selection key and Right selection key Assign a shortcut to the selection keys in the standby mode Active standby apps Select the application shortcuts you want to appear in the active standby This setting is only available if Active standb
24. To end the video call press Call waiting You can answer a call while you have another call in progress if you have activated Call waiting in Tools gt Settings gt Phone gt Call gt Call waiting network service To answer the waiting call press am The first call is put on hold To switch between the two calls select Swap To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls select Options gt Transfer To end the active call press oJ To end both calls select Options gt End all calls gt Log Y To monitor the phone numbers of missed received and dialed voice calls press and select Tools gt Log gt Recent calls The device registers missed and received calls only if the network supports these functions the device is switched on and within the network service area To clear all recent call lists select Options gt Clear recent calls in the recent calls main view To clear one of the call registers open the register you want to erase and select Options gt Clear list To clear an individual event open a register scroll to the event and press C Call duration To monitor the approximate duration of your incoming and outgoing calls press and select Tools gt Log gt Call duration PS Note The actual time invoiced for calls by your service provider may vary depending on network features rounding off for billing and s
25. an unread multimedia message f an unread audio message and data received through Bluetooth connectivity 71 Messag 72 When you receive a message D7 and 1 new message are displayed in the standby mode To open the message select Show If the fold is closed and the message cannot appear on the cover Open fold to view message is displayed Open the cover to view the message When the fold is open scroll to Inbox and press open it To reply to a received message select Options gt Reply When the fold is closed and you have more than one unread message select Show to open Inbox Use the volume and quick cover keys to navigate in the Inbox folder and when viewing messages Multimedia messages Q Important Exercise caution when opening messages Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC You may receive a notification that a multimedia message is waiting in the multimedia message center To start a packet data connection to retrieve the message to your device select Options gt Retrieve When you open a multimedia message jy you may see an image and a message F3 is shown if sound is included or if video is included To play the sound or the video select the indicator To see the media objects that have been included in the multimedia message select Options gt Objects If the message includes a multimedia presentation
26. and international operator charges will apply You should receive a message indicating whether the code can be authenticated What if your battery is not authentic 115 If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery please do not use the battery Take it to the nearest authorized Nokia service point or dealer for assistance The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements It may also invalidate any approval or warranty applying to the device To find out more about original Nokia batteries visit www nokia com battery Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care The following suggestions will help you protect your warranty coverage Keep the device dry Precipitation humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits If your device does get wet remove the battery and allow the device to dry completely before replacing it Do not use or store the device in dusty dirty areas Its moving parts and electronic components can be damaged Do not store the device in hot areas High temperatures can shorten the life of electronic devices damage batteries and warp or melt certain plastics e Do not store the device in c
27. and you should never rely solely on location data from the GPS receiver for positioning or navigation The trip meter has limited accuracy and rounding errors may occur Accuracy can also be affected by availability and quality of GPS signals With Landmarks you can save and view the position information of specifc locations in your device With GPS data you can access route guidance information to a selected destination position information about your current location and traveling information such as the approximate distance to the destination and approximate duration of travel Landmarks and GPS data may be network based network service or they may require that you use a compatible GPS receiver For more information on Landmarks and GPS data see the guides for your device at www nseries com support or your local Nokia website Settings To change settings press 3 and select Tools gt Settings Scroll to General Phone Connection or Applications and press Scroll to a setting or setting group you want to change and press Some settings may be preset for the device by your service provider and you may not be able to change them General ly To edit the general settings of your device or restore the original default device settings press and select Tools gt Settings gt General gt Personalisation Date and time Cover display Enhancement Security Factory settings or
28. authority certificate and select Options gt Trust settings Depending on the certificate a list of the applications that can use the selected certificate is shown Symbian installation Yes The certificate is able to certify the origin of a new Symbian operating system application Internet Yes The certificate is able to certify servers App installation Yes The certificate is able to certify the origin of a new Java application Select Options gt Edit trust setting to change the value Security module To view or edit a security module if available in Security module scroll to it and press To view detailed information about a security module scroll to it and select Options gt Security details Factory settings To reset some of the settings to their original values select Tools gt Settings gt General gt Factory settings To do this you need the lock code See Phone and SIM card p 102 After resetting the device may take a longer time to power on Documents and files are unaffected Positioning Select the used Positioning methods to detect the location of your device Bluetooth GPS to use a compatible external GPS receiver with Bluetooth connectivity and Network based to use information from the cellular network network service The location information can be used by compatible applications in your device Phone A To edit the settings related to making and receiving cal
29. automatically keeps track of your multimedia items and organizes your photos videos sounds text messages multimedia messages and weblog posts into a chronology that you can browse search share publish and back up For more information on Nokia Lifeblog see the guides for your device at www nseries com support or your local Nokia website Camera Your device has two cameras a high resolution camera on the back of the device the main camera in landscape mode and a lower resolution camera on the upper right corner of the main display the secondary camera in portrait mode You can use both cameras to take still pictures and record videos Your device supports an image capture resolution of 1600x1200 pixels using the main camera The image resolution in this guide may appear different The images and video clips are automatically saved in the Images amp video folder in Gallery The cameras produce jpeg images Video clips are recorded in the MPEG 4 file format with the mp4 file extension or in the 3GPP file format with the 3gp file extension sharing quality See Video settings p 36 You can send images and video clips in a multimedia message as an e mail attachment or by using Bluetooth connectivity You can also upload them to your compatible online aloum See Online sharing p 42 Take pictures When taking a picture note the following Pa O e Use both hands to keep the camera still
30. contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited FCC INDUSTRY CANADA NOTICE Your device may cause TV or radio interference for example when using a telephone in close proximity to receiving equipment The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated If you require assistance contact your local service facility This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Any changes or modifications not expressly approved by Nokia could void the user s authority to operate this equipment The third party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia Nokia does not own the copyrights or intellectual property rights to the third party applications As such Nokia does not take any responsibility for end user support functionality of the applications or the information in the applications or these materials Nokia does not provide any warranty for the third party applications BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRAN
31. device operate using radio signals wireless networks landline networks and user programmed functions Because of this connections in all conditions cannot be guaranteed You should never rely solely on any wireless device for essential communications like medical emergencies To make an emergency call 1 Ifthe device is not on switch it on Check for adequate signal strength Some networks may require that a valid SIM card is properly inserted in the device 2 Press the end key as many times as needed to clear the display and ready the device for calls 3 Enter the official emergency number for your present location Emergency numbers vary by location 4 Press the call key If certain features are in use you may first need to turn those features off before you can make an emergency call If the device is in the offline or flight profile mode you may need to change the profile to activate the phone function before you can make an emergency call Consult this guide or your service provider for more information When making an emergency call give all the necessary information as accurately as possible Your wireless device may be the only means of communication at the scene of an accident Do not end the call until given permission to do so n Certification information SAR g THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO ot RADIO WAVES Your mobile device is a radio transmitter and receiver It is designed not to e
32. images on a compatible printer or to store them on a compatible memory card if inserted for printing select Options gt Print See Image print p 41 You can also tag images for later printing to the Print Basket in Gallery See Print Basket p 40 To edit a video clip or a photo select Options gt Edit An image editor or a video editor opens See Edit video clips p 43 See Edit images p 42 To create custom video clips select a video clip or several clips in the gallery and select Options gt Edit See Edit video clips p 43 To add an image or a video clip to an album in the gallery select Options gt Albums gt Add to album See Albums p 40 To use the picture as a background image select the picture and Options gt Use image gt Set as wallpaper To delete an image or video clip from the active toolbar select Delete See Active toolbar p 39 To switch from Gallery to the camera press and hold Active toolbar In the Images amp video folder you can use active toolbar as a shortcut to select different tasks The active toolbar is available only when you have selected an image or a video clip In the active toolbar scroll up or down to different items and select them by pressing The available options vary depending on the view you are in and whether you have selected an image or a video clip You can also define whether the active toolbar is always vi
33. in the Images amp video folder or in an album and Remove from print from the active toolbar Albums With albums you can conveniently manage your images and video clips To view the albums list select Images amp video gt Options gt Albums gt View albums To add a picture or a video clip to an album in the gallery scroll to a picture or video clip and select Options gt Albums gt Add to album A list of aloums opens Select the aloum to which you want to add the picture or video clip The added pictures and video clips are not deleted from the Images amp video folder To remove a file from an album press C The file is not deleted from the Images amp video folder in Gallery To create a new album in the albums list view select Options gt New album Free memory To reduce the resolution and file size of images saved in Gallery and free memory for new pictures select Options gt Shrink To back up the images first copy them to a compatible PC or other location Selecting Shrink reduces the resolution of an image to 640x480 To increase free memory space after you have copied items to other locations or devices select Options gt Free memory You can browse a list of files you have copied To remove a copied file from Gallery select Options gt Delete Image print To print images with Image print select the image you want to print and the print option in the gallery camera image editor or im
34. is attached press and hold the headset key to start voice dialing 2 Ashort tone is played and Speak now is displayed Say clearly the name or nickname that is saved on the contact card 3 The device plays a synthesized voice tag for the recognized contact in the selected device language and displays the name and number After a timeout of 2 5 seconds the device dials the number If the recognized contact was not correct select Next to view a list of other matches or Quit to cancel voice dialing If several numbers are saved under the name the device selects the default number if it has been set Otherwise the device selects the first available number of the following Mobile Mobile home Mobile business Telephone Tel home and Tel business Video calls When you make a video call network service you can see a real time two way video between you and the recipient of the call The live video image or video image captured by the camera in your device is shown to the video call recipient To be able to make a video call you must have a USIM card and be in the coverage of a UMTS network For availability of and subscription to video call services contact your wireless service provider A video call can only be made between two parties The video call can be made to a compatible mobile device or an ISDN client Video calls cannot be made while another voice video or data call is active Icons Zo You are
35. not receiving video the recipient is not sending video or the network is not transmitting it IN You have denied video sending from your device To send a still image instead see Call p 105 Even if you denied video sending during a video call the call is still charged as a video call Check the pricing with your service provider 1 To start a video call enter the phone number in the standby mode or select Contacts and a contact 2 Select Options gt Call gt Video call The secondary camera inside the fold is used by default for video calls Starting a video call may take a while Waiting for video image is shown If the call is not successful for example video calls are not supported by the network or the receiving device is not compatible you are asked if you want to try a normal call or send a text or multimedia message instead The video call is active when you see two video images and hear the sound through the loudspeaker The call recipient may deny video sending in which case you only hear the sound and may see a still image or a grey background graphic To change between showing video or hearing only sound select Options gt Enable or Disable gt Sending video Sending audio or Sending aud amp video To zoom in or out your own image press 8 or To switch the places of the sent video images on the display select Options gt Change image order To route the audio to a comp
36. phone numbers select Options gt Activate fixed dialling You need your PIN2 code to activate and deactivate fixed dialing or edit your fixed dialing contacts Contact your service provider if you do not have the code To add new numbers to the fixed dialing list select Options gt New SIM contact You need the PIN2 code for these functions When you use Fixed dialling packet data connections are not possible except when sending text messages over a Contacts phonebo 92 packet data connection In this case the message center number and the recipient s phone number must be included on the fixed dialing list When fixed dialing is activated calls may be possible to the official emergency number programmed into your device Add ringing tones for contacts To define a ringing tone for a contact or a contact group do the following to open a contact card or go to the groups list and select a contact group 2 Select Options gt Ringing tone A list of ringing tones opens 3 Select the ringing tone you want to use for the individual contact or the selected group You can also use a video clip as a ringing tone When a contact or group member calls you the device plays the chosen ringing tone if the caller s telephone number is sent with the call and your device recognizes it To remove the ringing tone select Default tone from the list of ringing tones Create contact groups In Contacts
37. playlist select Options gt Remove from playlist This deletion does not delete the song from the device it only removes it from the playlist To reorder songs in a playlist scroll to the song you want to move and select Options gt Reorder list To grab songs and drop them to a new position use the scroll key Music shop In the music shop network service you can search browse and purchase music for downloading to your device The variety availability and appearance of music shop services may vary You must have music shop settings and valid internet connections in order to use this service For more details see Music shop settings p 23 and Access points p 108 Go to music shop 1 In the Music menu select Options gt Go to Music shop 2 Select from the displayed options to search browse or select ringing tones Music shop settings The availability and appearance of the music shop settings may vary The settings may also be predefined and not editable If the settings are not predefined you may be asked to enter the following settings Address You must define the web address of the music shop service Default acc pt Select the access point to use when connecting to the music shop User Enter your user name for the music shop Passwd Enter your password for the music shop If User and Passwd fields are left empty you may have to enter them at login In the music sh
38. playlists select Playlists To refresh the library after you have updated the song selection in your device select Options gt Refresh Music library To open the view that displays the currently playing song press and hold lt gt To switch between Now playing and Music menu when the fold is closed press bis Use the quick cover and volume keys to select more music to play Select Options to modify the basic play settings Playlists To view and manage playlists in the music menu select Playlists The following playlists appear automatically Most played tracks Recently played songs and Recent additions To view details of the playlist select Options gt Playlist details Create a playlist 1 Select Options gt Create playlist 2 Enter a name for the playlist and select OK 3 Select artists to find the songs you want to include in the playlist Press to add items To show the song list under an artist title press 9 To hide the song list press 0 4 When you have made your selections select Done If a compatible memory card is inserted the playlist is saved to the memory card To add more songs later when viewing the playlist select Options gt Add songs To add songs albums artists genres and composers to a playlist from the different views of the music menu select an item and Options gt Add to a playlist gt Saved playlist or New playlist To remove a song from a
39. press to open the groups list Select Options gt New group 3 Write a name for the group or use the default name and select OK 4 Select the group and Options gt Add members 5 Scroll to a contact and press to mark it To add multiple members at a time repeat this action on all the contacts you want to add 6 Select OK to add the contacts to the group N To rename a group select Options gt Rename enter the new name and select OK Remove members from a group 1 In the groups list select the group you want to modify 2 Scroll to the contact and select Options gt Remove from group 3 Select Yes to remove the contact from the group Office Calculator in Press 3 and select Applications gt Calculator PS Note This calculator has limited accuracy and is designed for simple calculations Adobe Reader L With Adobe Reader you can read pdf documents on the display of your device This application has been optimized for pdf document content on handsets and other mobile devices and provides only a limited set of features compared with PC versions To open documents press 4 and select Applications gt Office gt Adobe PDF Your recent files are listed in the file view To open a document scroll to it and press Use File mgr to browse and open documents stored in the device memory and on a compatible memory card if inserted More information For more info
40. see Volume and loudspeaker control p 18 ss ee x gt O gt Use the volume keys to scroll up or down in a list in the fold closed mode Use the volume keys to zoom in and out when using the camera You can also use the volume keys to scroll through the active toolbar with the fold closed See Active toolbar Dud ls Transfer content from another device You can transfer content such as contacts from a compatible Nokia device to your Nokia N76 using Bluetooth connectivity Your device notifies you if the other device is not compatible ft The type of content that can be transferred depends on the model of the device from which you want to transfer content If the other device supports synchronization you can also synchronize data between the other device and your Nokia N76 If the other device cannot be powered on without a SIM card you can insert your SIM card in it When Nokia N76 is switched on without a SIM card the offline profile is automatically activated Transfer content 1 To use the application for the first time on your Nokia N76 select it in Welcome or press and select Tools gt Utilities gt Transfer If you have used the application before and want to start a new transfer select Transfer data 2 To have Nokia N76 search for devices with Bluetooth connectivity select Continue Select the device from which you want to transfer content On your Nokia N76 enter
41. select Tools gt Profiles To change the profile select Tools gt Profiles a profile and Options gt Activate You can also change the profile by pressing A in the standby mode Scroll to the profile you want to activate and select OK X Tip To switch between the general and silent profiles press and hold To modify a profile press 3 and select Tools gt Profiles Scroll to the profile and ec Options gt Personalise Scroll to the setting you want to change and press open the choices Tones stored on a compatible memory card if inserted are indicated with Ime In the tones list the Download sounds link network service opens a list of bookmarks You can select a bookmark and start connection to a web page to download more tones If you want the caller s name to be spoken when your device rings select Options gt Personalise and set Say caller s name to On The caller s name must be saved in Contacts To create a new profile select Options gt Create new Offline profile The Offline profile lets you use the device without connecting to the wireless network When you activate the Offline profile the connection to the wireless network is turned off as indicated by in the signal strength indicator area All wireless RF signals to and from the device are prevented If you try to send messages they are placed in the outbox to be sent later When the Offline profile is active you can us
42. supplied with the SIM card contact the operator whose SIM card is in your device UPUK code This code 8 digits is required to change a blocked UPIN code If the code is not supplied with the USIM card contact the operator whose USIM card is in your device Certificate management Digital certificates do not guarantee safety they are used to verify the origin of software In the certificate management main view you can see a list of authority certificates that are stored in your device Press of Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information to see a list of personal certificates if available 103 104 They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software Qs Important Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller they must be used correctly in order to benefit from increased security The existence of a certificate does not offer any protection by itself the certificate manager must contain correct authentic or trusted certificates for increased security to be available Certificates have a restricted lifetime If Expired certificate or Certificate not valid yet is shown
43. the standby mode Call barring and call diverting cannot be active at the same time Call barring Call barring network service allows you to restrict the calls that you make or receive with the device To change the settings you need the barring password from your service provider Select the desired barring option and set it on Activate or off Cancel or check whether the option is active Check status Call barring affects all calls including data calls Call barring and call diverting cannot be active at the same time When calls are barred calls may be possible to certain official emergency numbers Network Your device can automatically switch between the GSM and UMTS networks The GSM network is indicated with Yin the standby mode The UMTS network is indicated with 3G Network mode shown only if supported by the wireless service provider Select which network to use If you select Dual mode the device uses the GSM or UMTS network automatically according to the network parameters and the roaming agreements between the wireless service providers Contact your service provider for more details Operator selection Select Automatic to set the device to search for and select one of the available networks or Manual to manually select the network from a list of networks If the connection to the manually selected network is lost the device sounds an error tone and asks you to reselect a network The sel
44. you are within UMTS network coverage and a handover to GSM occurs the sharing session is discontinued but your voice call continues You cannot start Video sharing if you are not within UMTS network coverage e Ensure that both the sender and recipient are registered to the UMTS network If you invite someone to a sharing session and the recipient s device is not within UMTS network coverage or does not have Video sharing installed or person to person connections set up the recipient does not know that you are sending an invitation You receive an error message that the recipient cannot accept the invitation Settings Person to person connection settings A person to person connection is also known as a Session Initiation Protocol SIP connection The SIP profile settings must be configured in your device before you can use Video sharing Ask your service provider for the SIP profile settings and save them in your device Your service provider may send you the settings over the air or give you a list of the needed parameters If you know a recipient s SIP address you can enter it on the person s contact card Open Contacts from your device main menu and open the contact card or start a new card for that person Select Options gt Add detail gt SIP or Share view Enter the SIP address in the format username domainname you can use an IP address instead of a domain name If you do not know a SIP address for the contact
45. your device turn the Bluetooth technology off when you do not need it Also set Packet data connection to When needed To close all the applications that are running in the background and you do not use press and hold and select the applications from the list Then exit the application Application not responding Q How do close an application that is not responding A Press and hold 5 Scroll to the application and press to close the application Bluetooth connectivity Q Why can t find my friend s device A Check that both devices are compatible have activated Bluetooth connectivity and are not in hidden mode Check also that the distance between the two devices is not over 10 meters 33 feet and that there are no walls or other obstructions between the devices Q Why can t end a Bluetooth connection A If another device is connected to your device you can either end the connection using the other device or by deactivating Bluetooth connectivity Select Tools gt Bluetooth gt Bluetooth gt Off Camera Q Why do images look smudgy A Ensure that the camera lens protection windows are clean Display Troubleshooting O amp 111 Troubleshooting Q 112 Q Why do missing discolored or bright dots appear on the screen every time turn on my device A This is a characteristic of this type of display Some displays may contain pixels or dots that remain on or off This
46. 2 Digital rights management sce ancsnscscsscsccascasgschechtasedeseazeat 97 VIGO SMATIING sssssstesteseseseeeeeseesnsnnnnetiteeeeeeeeeessseennnuananinetees B4 i VOICE 1010 1111 1d 10 ene ere ee CE 98 Answer or decline a call cscccsicnscststarisstsasnactentertoveuateaccinaces 86 POSIGONINI cicnrcriiiircssniiosoinisinisiconnien ia esas esris 99 E a cases cece reece E E E E teeter tee 87 Push to talk scesenssstssmusnsitninstnstnsinntenenneeeee gg DEEENIGS sssssssssssssssssesssssssssssseessssssussssnne Le NI A A E A settee eeteeansia 100 Contacts phonebook s sessesseeees 90 Positioning caresessssssssssseessessssssessessssusssestsesseeunsssetunesteve 105 Save and edit names and NnUMberS ssessesseeseeesee 2 IO ENONE crea a eee 105 OCCU S sisri or i SCOPING srra Ar A E 107 Add ringing tones for CONTACTS 92 PANO Os seiere R EAS 110 Create contact GCOS eiras isa rEi aa 92 l Iaa Troubleshooting QHA csssceseeees 111 Dia e A ceteteaect ease tesvesenesseuens 93 l NCU MO cna 93 Battery information ee Eg Adobe Reader ceccseaseret tec edaranaeatenieeaaienice 93 Charging and discharging sssssssssssssrsssssssssstssssnsrtsnnres 114 ASO SEE eren R A ERS g3 Nokia battery authentication guidelines usss Lia NOTOS s S E E 94 Care and maintenanCe cececccccccccccceccccuccs 117 Be CON CL cerdeira 94 S Wireless Keyboard ss ssssssssssessssesrssersserrssrrssersserrserrnssrrssrrsns 94 Additional safety information
47. 4 Visual Standard by a consumer engaged in a personal and noncommercial activity and ii for use in connection with MPEG 4 video provided by a licensed video provider No license is granted or shall be implied for any other use Additional information including that related to promotional internal and commercial uses may be obtained from MPEG LA LLC See lt http www mpegla com gt Nokia operates a policy of ongoing development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL INCIDENTAL CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED THE CONTENTS OF THIS DOCUMENT ARE PROVIDED AS IS EXCEPT AS REQUIRED BY APPLICABLE LAW NO WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE MADE IN RELATION TO THE ACCURACY RELIABILITY OR CONTENTS OF THIS DOCUMENT NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE The availability of particular products and applications and services for these products may vary by region Please check with your Nokia dealer for details and availability of language options Export controls This device may
48. A The device is trying to retrieve a multimedia message from the multimedia messaging center Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses Press 3 and select Messaging gt Options gt Settings gt Multimedia msg Q How can end the data connection when the device starts a data connection again and again A To stop the device from making a data connection press 3 and select Messaging gt Options gt Settings gt Multimedia message gt Multimedia retrieval and one of the following Manual to have the multimedia messaging center save messages to be retrieved later You receive a notification when there is a new multimedia message that you can retrieve in the multimedia message center Off to ignore all incoming multimedia messages After this change the device does not make any network connections related to multimedia messaging PC connectivity Q Why do I have problems in connecting the device to my PC A Make sure that Nokia Nseries PC Suite is installed and running on your PC See the user guide for Nokia Nseries PC Suite on the CD ROM For further information on how to use Nokia Nseries PC Suite see the help function on Nokia Nseries PC Suite or visit the support pages at www nokia com Q Can use my device as a fax modem with a compatible PC A You cannot use your device as a fax modem However with call diverti
49. ACK UP COPIES Remember to make back up copies or keep a written record of all important information stored in your device CONNECTING TO OTHER DEVICES When connecting to any other device read its user guide for detailed safety instructions Do not connect incompatible products EMERGENCY CALLS Ensure the phone function of the device is switched on and in service Press the end key as many times as needed to clear the display and return to the standby mode Enter the emergency number then press the call key Give your location Do not end the call until given permission to do so About your device The wireless device described in this guide is approved for use on the E GSM 850 900 1800 and 1900 and UMTS 2100 networks Contact your service provider for more information about networks When using the features in this device obey all laws and respect local customs privacy and legitimate rights of others including copyrights Copyright protections may prevent some images music including ringing tones and other content from being copied modified transferred or forwarded Your device supports internet connections and other methods of connectivity Like computers your device may be exposed to viruses malicious messages and applications and other harmful content Exercise caution and open messages accept connectivity requests download content and accept installations only from trustworthy sources To increase t
50. NOKIA Nseries User ou ce Nokia N76 1 C 0434 DECLARATION OF CONFORMITY Hereby NOKIA CORPORATION declares that this RM 135 product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com phones declaration_of_conformity 2007 Nokia All rights reserved Nokia Nokia Connecting People Nseries N76 Navi and Visual Radio are trademarks or registered trademarks of Nokia Corporation Nokia tune is a sound mark of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited This product includes software licensed from Symbian symbian Software Ltd c 1998 2007 Symbian and Symbian OS are trademarks of Symbian Ltd Java and all Java based marks are trademarks or registered trademarks of Sun Microsystems Inc 2 lt Java POWERED US Patent No 5818437 and other pending patents T9 text input software Copyright C 1997 2007 Tegic Communications Inc All rights reserved This product is licensed under the MPEG 4 Visual Patent Portfolio License i for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG
51. Only devices that have compatible features can receive and display multimedia messages The appearance of a message may vary depending on the receiving device To create a new message select New message Messaging contains the following folders ew Inbox Received messages except e mail and cell broadcast messages are stored here E mail messages are stored in the Mailbox D My folders Organize your messages into folders 9 Tip To avoid rewriting messages that you send often use texts in the templates folder You can also create and save your own templates Sy Mailbox Connect to your remote mailbox to retrieve your new e mail messages or view your previously retrieved e mail messages offline See E mail p 76 amp gt Drafts Draft messages that have not been sent are stored here 3 Sent The last messages that have been sent excluding messages sent using Bluetooth connectivity are stored here To change the number of messages to be saved see Other settings p 79 amp Outbox Messages waiting to be sent are temporarily stored in the outbox for example when your device is outside network coverage El Reports You can request the network to send you a delivery report of the text messages and multimedia messages you have sent network service To enter and send service requests also known as USSD commands such as activation commands for network services to your service p
52. SB cable and select PC Suite as the connection mode To change the default USB connection mode press select Tools gt Connectivity gt USB gt USB mode Both Windows Media Player and Nokia Music Manager in Nokia Nseries PC Suite have been optimized for transferring music files For information about transferring music with Nokia Music Manager see the Nokia Nseries PC Suite user guide Music transfer with Windows Media Player The functionality of the music synchronization may vary between different versions of the Windows Media Player application For more information see the corresponding Windows Media Player guides and helps Manual synchronization After connecting your device with a compatible PC Windows Media Player selects manual synchronization if there is not enough free memory in your device With manual synchronization you can select the songs and playlists that you want to move copy or remove The first time you connect your device you must enter a name that is used as the name of your device in Windows Media Player To transfer manual selections 1 After your device is connected with Windows Media Player select your device in the navigation pane if more than one device is connected 2 Drag the songs or albums to the list pane for synchronization To remove songs or aloums select an item in the list and click Remove from list 3 Check that the list pane contains the files you want to synchronize and th
53. Setup settings color and lighting p 33 and Scenes p 33 Calendar and clock alarms notes for missed calls and new received messages are also displayed To view received text messages and the text and image objects of received multimedia messages open the fold and view the message on the main display See Inbox receive messages p 71 Incoming calls are indicated by their normal tone and a note In the cover display settings select Answer if fold opened to answer a call when you open the fold If a compatible headset is connected to the device press um To change the settings see Cover display p 50 To make calls or use the menu open the fold To lock the keys see Keypad lock keyguard p 18 Your Nokia I 13 x gt O gt 14 Fold open main display When you open the fold the main display lights up the keypad is available and you can access the menu To access the menu press 5 The fold opens about 165 degrees as shown in the picture Do not force the fold to open more Keys and navigation See the get started guide for a complete list of all the keys and parts in your device Menu key amp With the menu key you can access the main menu In an open application press to make the application run in the background To switch between open applications press and hold Navi scroll key Hereinafter referred to as the scroll k
54. TY OF ANY KIND EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD PARTY PATENTS COPYRIGHTS TRADEMARKS OR OTHER RIGHTS Issue 2 EN 9254268 Contents For your safety SEE EEEE 7 Pe Manage ceai 19 Get CONNECHEM ccccccececsessecscsescecsrcerseserees 10 Media applications ssssssssssenunsenenenuenenenuens 21 Musie pilaye F scce 21 SUPPOFt esesssesssesssessessnssatesseesseesseeneesaessaen 11 Visual Radio nnen 25 Nokia support and contact information ens me 11 RealPlayer an a E 27 A E POE I A T EE A A 11 Adobe Flash Player cesssssssssssssssssssssssssssssssssssssssssseseeseeseeeeee 28 CaN 10 o PE EE PERAE T 11 Nokia Lifeblog ccessssssssssssssssssssssssssssssssessssuesssssssssssesestteeeee 28 Additional APPIN CATIONS xs ccscssnccucnscsssancisseninsttaviensissanacesnazests 11 l Caa EEE 29 Your Nokia N76 s ssssssnunsooosessnrrrerenenns 12 Take pice nessa 29 Software updates PRAI E A E A AT 12 Still image camera indicators EENE EEA 30 Settings P E AEEA EEEE EEEE AE AE LEE OE EE E A 12 Active toolbar ETE A E E E E EEE 31 Welcome A A E E A A A AA 12 After taking a picture r T N dag te gaa eee ca EEEN 31 Modes Sadun uyuas deus E dun w
55. a code 1 16 digits and select OK Enter the same code on the other device and select OK The devices are now paired See Pair devices p 61 For some phone models the transfer application is sent to the other device as a message To install Data transfer on the other device open the message and follow the instructions on the display 3 From your Nokia N76 select the content you want to transfer from the other device Content is transferred from the memory of the other device to the corresponding location in your Nokia N76 Transfer time depends on the amount of data to be transferred You can cancel the transfer and continue later If the other device supports synchronization you can keep the data up to date in both devices To start a synchronization with a compatible Nokia device select Phones scroll to the device and select Options gt Synchronise Follow the instructions on the display The synchronization is two way If an item is deleted in one device it is deleted in both You cannot restore deleted items with synchronization To view the log of a previous transfer select Transfer log Essential indicators YP The device is being used in a GSM network 3G The device is being used in a UMTS network network service D7 You have one or more unread messages in the Inbox folder in Messaging You have received new e mail in the remote mailbox f There are messages waiting to be sent in the Outbox o
56. age viewer Use Image print to print your images using a compatible USB data cable Bluetooth connectivity or a compatible memory card if available You can only print images that are in jpeg format The pictures taken with the camera are automatically saved in Jpeg format To print to a printer compatible with PictBridge connect the data cable before you select the print option and check that the data cable mode is set to Image print or Ask on connection See USB p 62 Printer selection When you use Image print for the first time a list of available compatible printers is displayed after you select the image Select a printer The printer is set as the default printer If you have connected a printer compatible with PictBridge using a compatible USB data cable the printer is automatically displayed If the default printer is not available a list of available printing devices is displayed To change the default printer select Options gt Settings gt Default printer Print preview After you select the printer the selected images are displayed using predefined layouts To change the layout press or to browse through the available layouts for the selected printer If the images do not fit on a single page press 8 or to display the additional pages Print settings The available options vary depending on the capabilities of the printing device you selected To set a default printer
57. also press the end key to decline the sharing session and disconnect the voice call When you are receiving a video clip to mute the sound of the clip select Mute To end video sharing select Stop Video sharing also ends if the active voice call ends Answer or decline a call To answer the call press tum If Answer if fold opened is set to Yes in settings open the fold To mute the ringing tone when a call comes in select Silence If you do not want to answer a call press oJ If you have activated the Call divert gt If busy function to divert calls declining an incoming call also diverts the call See Call divert p 106 When you select Silence to mute the ringing tone of the incoming call you can send a text message without rejecting the call informing the caller that you cannot answer the call Select Options gt Send text message To set up this option and write a standard text message see Call p 105 Answer or reject a video call When a video call arrives gem is displayed Press tem to answer the video call Allow video image to be sent to caller is displayed To start sending live video image select Yes If you do not activate the video call video sending is not activated and you only hear the sound of the caller A grey screen replaces the video image To replace the grey screen with a still image captured by the camera in your device see Call Image in video call p 105
58. art an installed application locate it in the menu and press If the application does not have a default folder defined it is installed in the Applications folder To see which software packages are installed or removed and when select Options gt View log Q Important Your device can only support one antivirus application Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning After you install applications to a compatible memory card installation files sis remain in the device memory The files may use large amounts of memory and prevent you from storing other files To maintain sufficient memory use Nokia Nseries PC Suite to back up installation files to a compatible PC then use the file manager to remove the installation files from the device memory See File manager p 19 If the sis file is a message attachment delete the message from the Messaging inbox Remove applications and software Scroll to a software package and select Options gt Remove Select Yes to confirm If you remove software you can only reinstall it if you have the original software package or a full backup of the removed software package If you remove a software package you may no longer be able to open documents created with that software If another software package depends on the software package that you removed the other software package
59. at there is enough free memory on the device Click Start Syne to start the synchronization Automatic synchronization To change the default file transfer option in Windows Media Player click the arrow under Syne select your device and click Set up Syne Clear or select the Sync this device automatically check box If the Syne this device automatically check box is selected and you connect your device the music library in your device is automatically updated based on playlists you have selected in Windows Media Player If no playlists have been selected the whole PC music library is selected for synchronization Note that your PC library may contain more files that can fit to the device memory and the compatible memory card of your device See the Windows Media Player help for more information The playlists on your device are not synchronized with the Windows Media Player playlists e 417 Visual Radio F Press and select Music gt Radio You can use the application as a traditional FM radio with automatic tuning and saved stations or with parallel visual information related to the radio program on the display if you tune to stations that offer Visual Radio service The Visual Radio service uses packet data network service You can listen to the FM radio while using other applications If you do not have access to the Visual Radio service the operators and radio stations in your area may not support Visual Rad
60. atible headset with Bluetooth connectivity attached to your device select Options gt Activate handsfree To route the audio back to the loudspeaker of your device select Options gt Activate handset To adjust the volume during a video call use the volume keys on the side of the device To use the main camera for sending video select Options gt Use main camera To switch back to the secondary camera select Options gt Use secondary camera E To end the video call press Q o Video sharing 84 Use Video sharing network service to send live video or a video clip from your mobile device to another compatible mobile device during a voice call The loudspeaker is active when you activate Video sharing If you do not want to use the loudspeaker for the voice call while you share video you can also use a compatible headset Video sharing requirements Because Video sharing requires a UMTS connection your ability to use Video sharing depends on the UMTS network availability Contact your service provider for more information on the service and network availability and fees associated with using this service To use Video sharing you must do the following e Ensure that your device is set up for person to person connections See Settings p 84 e Ensure you have an active UMTS connection and are within UMTS network coverage See Settings p 84 If you start the sharing session while
61. ation 63 T text messages inbox 69 receiving 71 saving 79 sending 70 71 settings 75 writing 71 themes 49 time 67 tones See ringing tones transferring content from another device 16 transferring music 23 troubleshooting 111 U UMTS See data connections updating software 63 UPIN code 103 UPUK code 103 USB transferring video clips 44 USB data cable 62 USSD commands 69 V video call answering 86 making 82 rejecting 86 video clips 38 video player See RealPlayer videos See gallery Visual Radio 25 voice commands 98 voice dialing 82 voice mailbox 81 changing the phone number 81 diverting calls to voice mailbox 106 voice messages 81 voice tags 98 making calls 82 volume control adjusting volume 18 during a call 80 loudspeaker 18 volume keys 15 W wallpapers changing 49 cover display 50 using pictures 32 39 web access points See access points blogs 56 browser 52 feeds 56 service messages 72 weblog 28 welcome application 12 white balance 33 wireless keyboard 94 writing language 101
62. ations and software suitable for the Symbian operating system 4 The installation files have the sis or sisx extension Only install software specifically designed for your Nokia N76 Software providers will often refer to the official model number of this product the Nokia N76 1 Installation files may be transferred to your device from a compatible computer downloaded during browsing or sent to you in a multimedia message as an e mail attachment or using Bluetooth connectivity You can use Nokia Application Installer in Nokia Nseries PC Suite to install an application to your device If you use Microsoft Windows Explorer to transfer a file save the file to a compatible memory card local disk Install applications and software 3 that the application is not fully installed and Im that the application is installed on the memory card V indicates a sis application 2g a Java application ff C Important Only install and use applications and other software from trusted sources such as applications that are Symbian Signed or have passed the Java Verified testing Before installation note the following e To view the application type version number and the supplier or manufacturer of the application select Options gt View details To display the security certificate details of the application in Certificates select View details See Certificate management p 103 e lf you install a file that co
63. ay invalidate any approval or warranty and may be dangerous For availability of approved enhancements please check with your dealer When you disconnect the power cord of any enhancement grasp and pull the plug not the cord Get connected Use your device on the 2G and 3G networks See About your device p 8 Use Bluetooth technology to transfer files and connect to compatible enhancements See Bluetooth connectivity p 59 Use the Nokia AV Connector 3 5 mm to connect to compatible headsets and headphones See Headset p 18 Use a compatible data cable for example the Nokia Connectivity Cable DKE 2 to connect to compatible devices such as printers and PCs See USB p 62 Use a compatible microSD card to transfer data or back up information See Memory card tool p 19 Support Model number Nokia N76 1 Hereinafter referred to as Nokia N76 Nokia support and contact information Check www nseries com support or your local Nokia website for the latest version of this guide additional information downloads and services related to your Nokia product On the website you can get information on the use of Nokia products and services If you need to contact customer service check the list of local Nokia contact centers at www nokia com customerservice For maintenance services check your nearest Nokia service center at www nokia com repair Help pI Your de
64. battery These look like metal strips on the battery This might happen for example when you carry a Spare battery in your pocket or purse Short circuiting the terminals may damage the battery or the connecting object Leaving the battery in hot or cold places such as in a closed car in Summer or winter conditions will reduce the capacity and lifetime of the battery Always try to keep the battery between 15 C and 25 C 59 F and 77 F A device with a hot or cold battery may not work temporarily even when the battery is fully charged Battery performance is particularly limited in temperatures well below freezing Do not dispose of batteries in a fire as they may explode Batteries may also explode if damaged Dispose of batteries according to local regulations Please recycle when possible Do not dispose as household waste Do not dismantle or shred cells or batteries In the event of a battery leak do not allow the liquid to come in contact with the skin or eyes In the event of such a leak flush your skin or eyes immediately with water or seek medical help Nokia battery authentication guidelines Always use original Nokia batteries for your safety To check that you are getting an original Nokia battery purchase it from an authorized Nokia dealer look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps Successful completion of the four steps is not a t
65. bsite For more information on the application see the guides for your device at www nseries com support or your local Nokia website Edit images To edit the pictures after taking them or the ones already saved in Gallery select Options gt Edit Select Options gt Apply effect to open a grid where you can select different edit options indicated by small icons You can crop and rotate the image adjust the brightness color contrast and resolution and add effects text clip art or a frame to the picture Crop image To crop an image select Options gt Apply effect gt Crop To crop the image size manually select Manual or a predefined aspect ratio from the list If you select Manual a cross appears in the upper left corner of the image Use the scroll key to select the area to crop and select Set Another cross appears in the lower right corner Again select the area to be cropped To adjust the first selected area select Back The selected areas form a rectangle that forms the cropped image If you selected a predefined aspect ratio select the upper left corner of the area to be cropped To resize the highlighted area use the scroll key To freeze the selected area press To move the area within the picture use the scroll key To select the area to be cropped press Reduce redness To reduce redness of the eyes in an image select Options gt Apply effect gt Red eye reduction Move the cross on
66. change the allowed access points select Options and the corresponding option To change the options you need _ your PIN2 code Contact your service provider for the code Applications aX To edit the settings of some of the applications in your device press and select Tools gt Settings gt Applications The settings are also available in each application by selecting the settings option Troubleshooting Q amp A Access codes Q What is my password for the lock PIN or PUK codes A The default lock code is 12345 If you forget or lose the lock code contact your device dealer If you forget or lose a PIN or PUK code or if you have not received such a code contact your wireless service provider For information about passwords contact your access point provider for example a commercial internet service provider ISP or wireless service provider Battery Q Why does my battery drain fast A Features using Bluetooth technology or allowing such features to run in the background while using other features increase the demand on battery power and reduce battery life time Also packet data connections increase the demand on battery power If you have set Packet data connection to When available in Connection settings and there is no packet data coverage GPRS your device periodically tries to establish a packet data connection which causes the increased demand on battery power To prolong the operating time of
67. ct that interference is taking place a k Additional safety inform 119 X gt Additional safety informa 120 e Read and follow the directions from the manufacturer of their implanted medical device If you have any questions about using your wireless device with an implanted medical device consult your health care provider Hearing aids Some digital wireless devices may interfere with some hearing aids If interference occurs consult your service provider Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems electronic antiskid antilock braking systems electronic speed control systems and air bag systems For more information check with the manufacturer or its representative of your vehicle or any equipment that has been added Only qualified personnel should service the device or install the device in a vehicle Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device Check regularly that all wireless device equipment in your vehicle is mounted and operating properly Do not store or carry flammable liquids gases or explosive materials in the same compartment as the device its parts or enhancements For vehicles equipped with an air bag remember that air bags inflate with great force Do not place objects including installed or portable wire
68. ctivity p 59 and Online sharing p 42 This option is not available during an active call You may not be able to send video clips saved in the mp4 file format in a multimedia message You can also send the video clip to a call recipient during an active call Select Send to caller e To record a new video clip select New video Video settings There are two kinds of settings for the video recorder Video setup and main settings To adjust Video setup settings see Setup settings color and lighting p 33 The setup settings return to the default settings after you close the camera but the main settings remain the same until you change them again To change the main settings select Options gt Settings and from the following Video quality Set the quality of the video clip to High best quality for long term usage and playback ona compatible TV or PC and handset Normal standard quality for playback through your handset or Sharing limited video clip size to send using multimedia message If you want to view the video on a compatible TV or PC select High which has QVGA resolution 320x240 and the mp4 file format To send the video clip through MMS select Sharing QCIF resolution 3gp file format The size of the video clip recorded with Sharing is limited to 300 KB about 20 seconds in duration so that it can be conveniently sent as a multimedia message to a compatible device Audio recording Sel
69. d off to save battery power after the screen saver is actived A blue LED in the top of the cover display blinks to indicate that the device is powered on but in the sleep mode To turn the sleep mode on or off see Cover display p 101 Volume and loudspeaker control To increase or decrease the volume level when you have an active call or are listening to a sound press the volume keys The built in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear Lp Warning Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud To use the loudspeaker during a call select Options gt Activate loudspeaker To turn off the loudspeaker select Options gt Activate handset Keypad lock keyguard To lock the keys with the fold closed press kd then PP To unlock the keys press kK then Pp To lock the keys with the fold open press f then To unlock the keys press then When the keypad lock is on calls may be possible to the official emergency number programmed into your device Headset You can connect a compatible headset or compatible headphones to the Nokia AV Connector 3 5 mm of your device You may need to select the cable mode Do not connect products that create an output signal as this may cause damage to the device Do not connect any voltage source to the Nokia AV Connector
70. dia menu See Multimedia key p 14 Settings Select Options gt Settings and from the following Start up tone Select whether a tone is played when the application is started Auto start service Select Yes to have the Visual Radio service start automatically when you select a saved station that offers Visual Radio service Access point Select the access point used for the data connection You do not need an access point to use the application as an ordinary FM radio Current region Select the region you are currently located in This setting is displayed only if there was no network coverage when the application was started RealPlayer Press 3 and select Applications gt Media gt RealPlayer With RealPlayer you can play video clips or stream media files over the air without saving them to the device first RealPlayer supports files with extensions such as 3gp mp4 or rm However RealPlayer does not necessarily support all file formats or all the variations of file formats Play video clips To play a saved media file select Options gt Open and from the following e Most recent clips to play one of the last six files played in RealPlayer e Saved clip to play a file saved in Gallery Scroll to a file and press To adjust the volume use the volume keys Stream content over the air Many service providers require you to use an internet access point IAP for your default access p
71. e Messaging p 69 Mode key The mode key is a multifunction key allowing you to switch easily between selected applications and change the views within certain applications when the fold is closed With the fold open press to open the latest photo in Gallery With the fold open in Gallery press to switch between Images amp video and thumbnail views With the fold closed in Camera press to switch between Image mode and Video mode With the fold closed in Music player press to switch between Now playing and Music library With the fold closed in Visual Radio press to switch between channel and channel list views X Tip To only see the wallpaper on the cover display press the mode key twice in the standby mode Capture key Ce Press and hold _ amp _ to activate the main camera in the fold closed mode Press _ _ to take pictures See Take pictures p 29 gt O Z O gt 15 In video mode press _ amp _ to record video clips See Record videos p 35 Quick cover keys Use the quick cover keys P I Kd and PPI to control playback See Music player p 21 and Visual Radio p 25 Use the quick cover keys to lock the keypad with the fold closed See Keypad lock keyguard p 18 Press B ff to activate the active toolbar when using the camera in the fold closed mode See Active toolbar p 31 Volume keys To control the volume
72. e The quality of a digitally zoomed picture is lower than that of a nonzoomed picture e The camera goes into the battery saving mode if there are no keypresses for a moment To continue taking pictures press C Fold closed mode To take a picture using the cover display as the viewfinder do the following 1 To activate the main camera press and hold _ _ If the camera is in Video mode press HE 2 To take a picture press _ amp Do not move the device before the image is saved Fold open mode To take a picture using the main display as the viewfinder do the following 1 Open the fold 29 30 2 To activate the main camera press _ If the camera is in Video mode select Options gt Image mode 3 To take a picture press Donot move the device before the image Is saved To zoom in or out use the volume keys in your device To make lighting and color adjustments before taking a picture in the main display press or 6 items on the active toolbar In the cover display press B I to activate the toolbar and volume keys to scroll to items See Setup settings color and lighting p 33 and scenes ps 33 To free memory before taking a picture select Options gt Go to free memory in the main display only available if you have copied images or video clips to another location using Nokia Nseries PC Suite See Free memory p 40 To activate the front camera
73. e settings for User name Password Access point in use Security ports and Port are similar to the ones in Incoming e mail User settings My name Enter your own name Your name replaces your e mail address in the recipient s device when the recipient s device supports this function Send message Define how e mail is sent from your device Select Immediately for the device to connect to the mailbox when you select Send message If you select During next conn e mail is sent when the connection to the remote mailbox is available Send copy to self Select whether you want to send a copy of the e mail to your own mailbox Include signature Select whether you want to attach a signature to your e mail messages New e mail alerts Select whether you want to receive the new e mail indications a tone a note and a mail indicator when new mail is received p Automatic retrieval Retrieval settings E mail to retrieve Define which parts of the e mail are retrieved Headers only Size limit POP3 or Msgs amp attachs POP3 Retrieval amount Define how many new e mail messages are retrieved to the mailbox IMAP4 folder path for IMAP4 only Define the folder path for folders to be subscribed Folder subscriptions for IMAP4 only Subscribe to other folders in the remote mailbox and retrieve content from _ those folders E mail notifications To automatically retrieve the headings to your dev
74. e your device without a SIM card es Important In the offline profile you cannot make or receive any calls or use other features that require cellular network coverage Calls may still be possible to the official emergency number programmed into your device To make calls you must first activate the phone function by changing profiles If the device has been locked enter the lock code You can also use Bluetooth connectivity while in the Offline profile See Bluetooth connectivity p 59 To leave the Offline profile press the power key and select another profile The device re enables wireless transmissions providing there is sufficient signal strength Change the look of your Su device ay To change the look of the display such as the wallpaper and icons press 3 and select Tools gt Settings gt General gt Personalisation gt Themes To change the theme that is used for all the applications in your device select Themes gt General To change the theme of a certain application in the main view select an application To preview a theme before activating it select Options gt Preview To activate the theme select Options gt Set The active theme is indicated by The themes on a compatible memory card if inserted are indicated by The themes on the memory card are not available if the memory card is not inserted in the device If you want to use the themes saved in the memory card without the m
75. ect Mute if you do not want to record sound Add to aloum Select whether you want to add the recorded video clip to a certain aloum in Gallery Select Yes to open a list of available aloums Show captured video Select whether you want the first frame of the recorded video clip to be shown on the display after the recording stops Select Play from the active toolbar main camera or Options gt Play secondary camera to view the video clip Default video name Define the default name for the captured video clips Memory in use Define the default memory store device memory or memory card if inserted Restore camera settings Select Yes to return the default values to the camera settings 38 EE Gallery To store and organize your images video clips sound clips and streaming links press 3 and select Gallery X Tip If you are in another application to view the last saved picture in Gallery press and hold To enter the Images amp video folder main view press again View and browse files Select Images amp video p Tracks Sound clips 4 f Gallery Streaming links Presentations 43 or All files F and press to open it AL Tracks You can browse and open folders and mark copy and move items to folders You can also create albums and mark copy and add items to albums See Albums p 40 Lifeblog Sound clips Streaming links Files stored on your c
76. ected network must have a roaming agreement with your home cellular network X Glossary A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers Cell info display Select On to set the device to indicate when it is used in a cellular network based on microcellular network MCN technology and to activate cell info reception Connection To edit access point and other connection settings press and select Tools gt Settings gt Connection gt Bluetooth USB Access points Packet data Data call SIP settings Configurations or APN control For USB settings see USB p 62 For Bluetooth settings see Settings p 60 Data connections and access points Your device supports packet data connections network service such as GPRS in the GSM network When you use your device in GSM and UMTS networks multiple data connections can be active at the same time and access 108 points can share a data connection In the UMTS network data connections remain active during voice calls To establish a data connection an access point is required You can define different kinds of access points such as e MMS access point to send and receive multimedia messages e Internet access point IAP to send and receive e mail and connect to the internet Check the type of access point you
77. efore it finishes select Cancel Device manager 3 Software updates You may view and update the current software version of your device and check the date of a possible previous update network service Press amp amp and select Tools gt Utilities gt Device mgr To check whether software updates are available select Options gt Check for updates Select an internet access point when asked If an update is available information about it is displayed Select Accept to accept to download the update or Cancel to cancel the download The download may take several minutes You can use your device during the download Downloading software updates may involve the transmission of large amounts of data through your service provider s network Contact your service provider for information about data transmission charges 64 Make sure that the device battery has enough power or connect the charger before starting the update A gt Warning If you install a software update you cannot use the device even to make emergency calls until the installation is completed and the device is restarted Be sure to back up data before accepting installation of an update When the download is complete select Yes and then Accept to install the update or No to install it later by using Options gt Install update The installation may take several minutes The device updates the software and restarts To complete
78. electing a scene if needed Scenes A scene helps you to find the right color and lighting settings for the current environment The settings of each 34 scene have been set according to a certain style or environment Scenes are only available in the main camera In the active toolbar select from the following options Video scenes Automatic AN default and Night Image scenes Auto JAN default User defined Portrait ig Landscape R Night and Night portrait E When you take pictures the default scene is Auto To make your own scene suitable for a certain environment in the main display scroll to User defined and select Options gt Change In the user defined scene you can adjust different lighting and color settings To copy the settings of another scene select Based on scene mode and the desired scene In the cover display select Settings gt User scene gt Change To copy the settings of another scene select Based on scene Take pictures in a sequence The sequence mode is available only in the main camera To set the camera to take six pictures or more in a sequence if enough memory available in the active toolbar select Switch to sequence mode The number of pictures you can take depends on the available memory To take six pictures press the capture key To stop taking pictures press Cancel To take more than six pictures press and hold the capture key To stop
79. emory card save the themes in the device memory first To change the layout of the main menu select Themes gt Menu view Personalize your dev 49 P Personalize your To open a browser connection and download more themes in General or Menu view select Download themes network service eX Important Use only services that you trust and that offer adequate security and protection against harmful software To edit the wallpaper and power saver of the current theme select Themes gt Wallpaper to change the background image on the display for the active standby mode See also Display p 100 for power saver time out setting p Cover display To change the look of the cover display press and select Tools gt Settings gt General gt Personalisation gt Themes gt Cover personalis and from the following Wallpaper Select the background image displayed on the cover display in the standby mode Screen saver Select an image or animation to use as a screen saver on the cover display and how long it is displayed When you select an image to use as wallpaper or a screen saver a cropping frame the size of the cover display is shown on top of the image You can zoom and rotate the area of the image Scroll to move the frame around the display To use the area inside the frame select Options gt Set as wallpaper or Set as screen saver You cannot use a copyright protected image as wallpa
80. er music p 23 For more information about copyright protection see Digital rights management p 97 Play music To play music with the fold open do the following 1 Press and select Music gt Music player 2 In Music menu select a category such as All songs or Albums 3 Select the music you want to play In Now playing use the scroll key and the middle selection e Press to play or pause a song e Press to rewind the track or to skip backwards e Press 9 to fast forward the track or to skip forward e Press to stop playback To play music with the fold closed do the following 1 In standby mode press Fd to enter Music menu 2 Select the music you want to play and press p gt In Now playing use the quick cover keys to control playback e Press p gt to play or pause a song When you pause a song a list of the tracks you are currently listening to is displayed Press d to rewind the track or to skip backwards Press PP to fast forward the track or to skip forward e To switch between Now playing and Music menu press 21 ia app Me Music menu To select more music to play in Now playing when the fold is open select Options gt Go to Music menu The music menu shows the music available in the device and compatible memory card if inserted All songs lists all music To view sorted songs select Albums Artists Genres or Composers To view
81. ersonal weblogs online communities that offer latest headlines and article summaries Web feeds use RSS and ATOM technologies Browse the web es Important Use only services that you trust and that offer adequate security and protection against harmful software With Web you can view web pages as they are originally designed To browse a web page in the bookmarks view select a bookmark or enter the address in the field Then press Some web pages may contain material such as graphics and sounds that requires a large amount of memory to view If your device runs out of memory while loading such a page the graphics on the page are not shown To browse web pages without graphics to save memory select Options gt Settings gt Page gt Load images and sounds gt No X Tip To return to the standby mode with the browser open in the background press twice or lo return to the browser press and hold 5 and select the browser from the list To open links and make selections press Selaa as O P Z 53 i VU 54 To enter a new web page address you want to visit select Options gt Go to web address 295 Tip To visit a web page saved as bookmark in the bookmarks view while browsing press 1 and select a bookmark To retrieve the latest content of the page from the server select Options gt Navigation options gt Reload To save the web address of the curre
82. essage to retrieve in the multimedia message i center Outside your home cellular network sending and receiving multimedia messages may cost you more If you select Multimedia retrieval gt Always automatic your device automatically makes an active packet data connection to retrieve the message both in and outside your home cellular network Allow anon msgs Select whether you want to reject messages from an anonymous sender Receive adverts Define whether you want to receive multimedia message advertisements Receive report Select whether you want the status of the sent message to be shown in the log network service Deny report sending Select whether you want to deny your device sending delivery reports of received messages Message validity Select how long the message center resends your message if the first attempt fails network service If the message cannot be sent within the validity period the message is deleted from the message center E mail Press and select Messaging gt Options gt Settings gt E mail To select which mailbox you want to use for sending e mail select Mailbox in use and a mailbox Select Mailboxes and a mailbox to change the following settings Connection settings User settings Retrieval settings and Automatic retrieval To remove a mailbox and its messages from your device scroll to it and press C To create a new mailbox select Options gt New mailbox Co
83. essly to another compatible device first set Bluetooth connectivity On then establish a connection To switch off Bluetooth connectivity select Off My phone s visibility To allow your device to be found by other devices with Bluetooth wireless technology select Shown to all To set a time after which the visibility is set from shown to hidden select Define period To hide your device from other devices select Hidden My phone s name Edit the name shown to other devices using Bluetooth wireless technology Remote SIM mode To enable another device such as a compatible car kit enhancement to use the SIM card in your device to connect to the network select On For more information see Remote SIM mode p 62 Security tips When you are not using Bluetooth connectivity select Bluetooth gt Off or My phone s visibility gt Hidden In this way you can better control who can find your device with Bluetooth wireless technology and connect to it Do not pair with or accept connection requests from an unknown device In this way you can better protect your device from harmful content Send data using Bluetooth connectivity Several Bluetooth connections can be active at a time For example if you are connected to a compatible headset you can also transfer files to another compatible device at the same time For Bluetooth connectivity indicators see Essential indicators p 17 X Tip To send text usin
84. ey Use the scroll key to move around the menus fe 5 g and to select items SY lt Tip When in the menus instead of using the scroll key you can use the number keys and to quickly access the applications For example in the main menu press 3 to open Calendar Multimedia key lt gt With the multimedia key you have quick access to multimedia content and predefined applications To open the shortcut assigned to the multimedia key press and hold lt gt To open a list of multimedia applications press lt gt To open the desired application use the scroll key To exit the list without selecting an application press a lt gt v To change the shortcuts press lt 4 and To change the applications that are shown when you press gt select Top Left Middle and Right and the application Some shortcuts may be fixed and you are not able to change them Edit key To copy and paste text press and hold Q to select letters 00 or to highlight text To copy the text to clipboard while still holding Q select Copy To insert the text into a document press and hold amp and select Paste Edit text and lists e To mark an item ina list scroll to it and press and at the same time then Lie Q In Messaging use the edit key to turn predictive text on enter in the number mode insert a symbol and change the writing language Se
85. for it in Contacts To enter a wait character w or a pause character p press repeatedly Select OK to send the tone You can add DIMF tones to the Phone number or DTMF fields in a contact card To put an active voice call on hold while answering another Incoming call select Options gt Hold To switch between the active and the held call select Options gt Swap To connect the active and held calls and drop yourself from the line select Options gt Transfer X Tip When you have only one active voice call to put the call on hold press tum To activate the call press Wma again During an active call to route the sound from the handset to the loudspeaker select Activate loudspeaker If you have attached a compatible headset with Bluetooth connectivity to route the sound to the headset select Options gt Activate handsfree To switch back to the handset select Options gt Activate handset To end an active call and replace it by answering the waiting call select Options gt Replace If you have several calls active to end them all select Options gt End all calls Many of the options that you can use during a voice call are network services Voice and video mailboxes To call your voice or video mailbox network services video mailbox available only in the UMTS network press and hold 1 in the standby mode and select Voice mailbox or Video mailbox See also Call divert p 106 and Video calls
86. formation 119 emergency calls 121 guidelines 7 scenes image scenes 34 video scenes 34 screen saver 50 scroll key 14 security code See ock code security settings 102 self timer camera 34 sending contact cards business cards 90 messages 70 video clips 44 sequence mode 34 service commands 69 settings access points 108 application 100 Bluetooth connectivity 60 call barring 106 call diverting 106 certificates 103 cover display 101 data call 109 data connections 107 defining 12 display 100 e mail 73 76 enhancements 101 general 100 keypad lock 102 language 101 lock code 103 messaging 75 multimedia messages 75 original settings 105 personalisation 100 personalizing the phone 48 PIN code 103 power saver 100 security 102 SIP 109 text messages 75 UPIN code 103 UPUK code 103 settings wizard 12 E SIM card copying names and numbers to your device 91 messages 74 names and numbers 91 using device without a SIM card 49 sis file 95 sleep mode 18 101 SMS See text messages me snooze 67 software installing applications 95 removing applications 96 transferring a file to your device 95 software update 12 63 songs file formats 21 transferring 23 sound clips 38 sounds adjusting volume 18 muting a ringing tone 86 recording sounds 94 speaker phone See oudspeaker speed dialing 81 106 standby mode 48 100 support information 11 svg files 47 synchroniz
87. formation or services you have accessed are stored in the cache memory of the device A cache is a memory location that is used to store data temporarily If you have tried to access or have accessed confidential information requiring passwords empty the cache after each use The information or services you have accessed are stored in the cache To empty the cache select Options gt Clear privacy data gt Clear cache Settings Select Options gt Settings and from the following General settings Access point Change the default access point See Connection p 107 Some or all access points may be preset for your device by your service provider you may not be able to change create edit or remove them Homepage Define the home page Mini Map Set Mini Map on or off See Mini Map p 55 History list While browsing to use the selection key Back to see a list of the pages you have visited during the current browsing session set History list on Security warnings Hide or show security notifications Java ECMA script Enable or disable the use of scripts Page settings Load images and sounds Select whether you want to load images and other objects while browsing If you select No to load images or objects later during browsing select Options gt Tools gt Load images Screen size Select between Full screen and the normal view with the Options list Default encoding lf text characters are no
88. g Bluetooth connectivity open Notes write the text and select Options gt Send gt Via Bluetooth 1 Open the application where the item you want to send is stored For example to send an image to another compatible device open Gallery 2 Select the item and Options gt Send gt Via Bluetooth Devices with Bluetooth wireless technology within range start to appear on the display Device icons computer phone ij audio or video device and other device To interrupt the search select Stop 3 Select the device with which you want to connect 4 Ifthe other device requires pairing before data can be transmitted a tone sounds and you are asked to enter a passcode See Pair devices p 61 5 When the connection has been established Sending data is shown X Tip When searching for devices some devices may show only the unique address device address To find the unique address of your device enter the code 2820 in the standby mode Pair devices To pair with compatible devices and view your paired _ devices in the Bluetooth application main view press 89 Before pairing create your own passcode 1 16 digits and agree with the owner of the other device to use the same code Devices that do not have a user interface have a factory set passcode The passcode is used only once 1 To pair with a device select Options gt New paired device Devices with Bluetooth wireless technology within range s
89. g community and news organizations to share the latest entry headlines or full text for example recent news in the form of news feeds Blogs or weblogs are web diaries Most of the web feeds use RSS and ATOM technologies It is common to find web feeds on web blog and wiki pages The web browser automatically detects if a web page contains web feeds To subscribe to a web feed select Options gt Subscribe or click on the link To view the web feeds to which you have subscribed in the bookmarks view select Web feeds To update a web feed select it and Options gt Refresh To define how the web feeds are updated select Options gt Settings gt Web feeds See Settings p 57 End connection To end the connection and view the browser page offline select Options gt Tools gt Disconnect or to end the connection and close the browser select Options gt Exit Pressing does not end the connection but takes the browser to the background To delete the information the network server collects about your visits to various web pages select Options gt Clear privacy data gt Delete cookies To clear the data you entered for different forms on the web pages you visited select Options gt Clear privacy data gt Form password data To clear the information stored about the pages you have visited during the current browsing session select Options gt Clear privacy data gt History Empty the cache The in
90. g the next connection BH and select Options gt Restore Disconnect from the mailbox When you are online to end the data connection to the remote mailbox select Options gt Disconnect View messages on a SIM card Before you can view SIM messages you must copy them to a folder in your device 1 Inthe Messaging main view select Options gt SIM messages 2 Select Options gt Mark Unmark gt Mark or Mark all to mark messages 3 Select Options gt Copy A list of folders opens 4 To start copying select a folder and OK To view the messages open the folder Messaging settings Fill in all fields marked with Must be defined or with a red asterisk Follow the instructions given by your service provider You may also obtain settings from your service provider in a configuration message Some or all message centers or access points may be preset for your device by your service provider and you may not be able to change create edit or remove them Text messages Press and select Messaging gt Options gt Settings gt Text message and from the following Message centres View a list of all text message centers that have been defined Message centre in use Select which message center is used to deliver text messages Character encoding To use character conversion to another encoding system when available select Reduced support Receive report Select whether the network sends delivery report
91. he cut video view press Back To save the changes and return to Gallery press Done Send videos To send the video select Options gt Send gt Via multimedia Via e mail Via Bluetooth or Web upload Contact your service provider for details of the maximum multimedia message size that you can send X Tip If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider you can send the clip using Bluetooth wireless technology See Send data using Bluetooth connectivity p 95 You can also transfer your videos to a compatible PC using Bluetooth connectivity a USB data cable or by using a compatible memory card reader enhancement Movie director To create muvees press and select Gallery images and videos and Options gt Edit gt Create muvee A muvee is a short edited video clip that can contain video images music and text Quick muvee is created automatically by Movie director after you select the style for the muvee Movie director uses the default music and text associated with the chosen style In a custom muvee you can select your own video and music clips images and style and add an opening and closing message You can send muvees in a multimedia message A muvee can be saved in Gallery in 3gp file format Create a quick muvee 1 In Gallery select images and videos for the muvee and Options gt Edit gt Create muvee The style selection vie
92. he security of your device consider installing using and regularly updating antivirus software firewall and other related software on your device and any connected computer le Warning To use any features in this device other than the alarm clock the device must be switched on Do not switch the device on when wireless device use may cause interference or danger The office applications support common features of Microsoft Word PowerPoint and Excel Microsoft Office 97 2000 and XP Not all file formats can be viewed or modified During extended operation such as an active video sharing session or high speed data connection the device may feel warm In most cases this condition is normal If you suspect the device is not working properly take it to the nearest authorized service facility Your device may have preinstalled bookmarks and links for third party internet sites You may also access other third party sites through your device Third party sites are not affiliated with Nokia and Nokia does not endorse or assume liability for them If you choose to access such sites you should take precautions for security or content The images in this guide may differ from your device display Network services To use the phone you must have service from a wireless service provider Many of the features require special network features These features are not available on all networks other networks may require that y
93. ht sensitivity 33 lock code 103 log duration 88 erasing contents 88 filtering 88 loudspeaker 18 M mailbox 73 maintenance 117 media keys 15 memory freeing memory 20 40 87 viewing memory consumption 20 memory card memory card tool 19 menu key 14 menu rearranging 48 messaging cell broadcast 78 e mail 70 inbox 71 mailbox 73 multimedia messages 70 settings 75 text messages 70 microSD card 19 missed calls 87 MMS See multimedia messages mode key 15 modes accessing features 12 fold closed 13 fold open 14 movies muvees custom muvees 45 quick muvees 45 multimedia key 14 multimedia messages creating 70 receiving 71 retrieving 72 saving 79 sending 70 settings 75 music See music player music player downloading music 23 file formats 21 music shop 23 playlists 22 transferring music 23 N network mode 107 Nokia Lifeblog 28 notes 94 O offline profile 49 P packet data settings 109 PC connections 63 pdf files 93 personalization 49 phone language 101 phonebook See contact cards PIN codes 103 positioning 99 power saver 100 power saver LED 18 printing images 41 profiles 48 PUK codes 103 push to talk 88 Q quick cover keys 15 R radio 25 RealPlayer 27 recent calls 87 recorder 94 remote mailbox 73 remote SIM mode 62 resolution image capture 29 image quality settings 32 video quality settings 37 ringing tones personal ringing tone 92 See also profiles S safety additional in
94. ice when you receive new e mail in your remote mailbox select Auto update or Only in home netw E mail retrieval To automatically retrieve the headings of new e mail messages from your remote mailbox at defined times select Enabled or Only in home netw Define when and how often the messages are retrieved E mail notifications and E mail retrieval cannot be active at the same time Setting the device to retrieve e mail automatically may involve the transmission of large amounts of data through your service provider s network Contact your service provider for information about data transmission charges Web service messages Press and select Messaging gt Options gt Settings gt Service message Select whether you want to receive service messages If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message select Download messages gt Automatically Cell broadcast Check the available topics and related topic numbers with your service provider Press and select Messaging gt Options gt Settings gt Cell broadcast and from the following Reception Select whether you want to receive cell broadcast messages Language Select the languages in which you want to receive messages All Selected or Other Topic detection Select whether the device automatically searches for new topic numbers and saves the new nu
95. ing delivery reports are permanently deleted SK Tip In the details view you can copy a phone number to the clipboard and paste it to a text message for example Select Options gt Copy number To view from the packet data counter how much data is transferred and how long a certain packet data connection lasts scroll to an incoming or outgoing event indicated by Pack and select Options gt View details _ Push to talk J Press 3 and select Tools gt Connectivity gt PTT Push to talk PTT network service is a real time voice over IP service implemented over a GSM GPRS network Push to talk provides direct voice communication connected with the push of a key Use push to talk to have a conversation with one person or with a group of people Before you can use push to talk you must define the push to talk access point and push to talk settings You may receive the settings in a special text message from the service provider that offers the push to talk service You can also use the Sett wizard application for configuration if supported by your service provider In push to talk communication one person talks while the others listen through the built in loudspeaker Speakers take turns responding to each other Because only one group member can talk at any time the maximum duration of a speech turn is limited The maximum duration is usually set to 30 seconds For details of the speech turn duration for your networ
96. io You can normally make a call or answer an incoming call while listening to the radio The radio is muted when there 3 is an active call If you start music player when the radio is on the radio is muted When music playback is paused or stopped press amp 3 and select Music gt Radio to resume listening When the fold is closed use the quick cover keys and the volume and mode keys to control the FM radio Listen to the radio Note that the quality of the radio broadcast depends on the coverage of the radio station in that particular area The FM radio depends on an antenna other than the wireless device antenna A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly Press and select Music gt Radio To start a station search select E or EB or press and hold the quick cover keys PP or KE To change the frequency manually select Options gt Manual tuning If you have previously saved radio stations to go to the next or previous saved station select ES or HEB or press the quick cover keys Pp or Ke To adjust the volume press the volume keys 25 Media applicatio 26 To listen to the radio using the loudspeaker select Options gt Activate loudspeaker Warning Listen to music at a moderate level Continuous exposure to high volume may damage your hearing Do not hold the device near your ear when the loudspeaker is in use becau
97. is normal not a fault Memory low Q What can do if my device memory is low A You can delete unused items saved in your device regularly to avoid memory getting low See Memory low free memory p 20 To delete contact information calendar notes call timers call cost timers game scores or any other data go to the respective application to remove the data If you are deleting multiple items and one of the following notes are shown Not enough memory to perform operation Delete some data first or Memory low Delete some data from phone memory try deleting items one by one starting from the smallest item To view what kind of data you have and how much memory the different data groups consume press 3 and select Tools gt File manager gt Options gt Memory details Q How can save my data before deleting it A Save your data using one of the following methods e Use Nokia Nseries PC Suite to make a backup copy of all data to a compatible computer e Send images to your e mail address then save the images to your computer e Send data using Bluetooth connectivity to a compatible device e Store data on a compatible memory card Messaging Q Why can t select a contact A The contact card does not have a phone number or an e mail address Add the missing information to the contact card in Contacts Multimedia messaging Q The note Retrieving message is shown briefly What is happening
98. k contact your service provider A gt Warning Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud Phone calls always take priority over push to talk activities For more information on push to talk see the guides for your device at www nseries com support or your local Nokia website O ke SL N Q 4 O Q 90 Contacts phonebook lj Press 3 and select Contacts In Contacts you can save and update contact information such as phone numbers home addresses or e mail addresses of your contacts You can add a personal ringing tone or a thumbnail image to a contact card You can also create contact groups which allow you to send text messages or e mail to many recipients at the same time You can add received contact information business cards to contacts See Data and settings p 72 Contact information can only be sent to or received from compatible devices To view the amount of contacts groups and the available memory in Contacts select Options gt Contacts info Save and edit names and numbers 1 Select Options gt New contact 2 Fill in the fields that you want and select Done To edit contact cards in Contacts scroll to the contact card you want to edit and select Options gt Edit You can also search for the desired contact by entering the first letters of the name to the search field A list of the co
99. l settings p 73 and E mail p 76 The wireless network may limit the size of MMS messages If the inserted picture exceeds this limit the device may make it smaller so that it can be sent by MMS 1 Select New message and from the following Text message to send a text message Multimedia message to send a multimedia message MMS Audio message to send an audio message a multimedia message that includes one sound clip E mail to send an e mail 2 Inthe To field press to select recipients or groups from contacts or enter the recipient s phone number or e mail address To add a semicolon that separates the recipients press x You can also copy and paste the number or address from the clipboard In the Subject field enter the subject of a multimedia message or e mail To change the fields that are visible select Options gt Address fields 4 Inthe message field write the message To insert a template select Options gt Insert or Insert object gt Template 5 Toadda media object toa multimedia message select Options gt Insert object gt Image Sound clip or Video clip 6 To take a new picture or record sound or video for a multimedia message select Insert new gt Image Sound clip or Video clip To insert a new slide to the message select Slide To see what the multimedia message looks like select Options gt Preview 7 To add an attachment to an e mail select Options gt Insert gt
100. lay deactivates and the cover display lights up Ongoing calls end unless the loudspeaker is in use or a compatible headset is connected To change the settings see Cover display p 50 If you are using Music player or Visual Radio to listen to a sound clip it continues to play With the fold closed the cover display provides clock and status information In the standby mode the signal strength and battery indicators time information and the status indicators may be displayed If you are using Music player to listen to a sound clip volume bars and track information are displayed To play pause or play the next or previous sound clip use the quick cover keys To adjust the volume use the volume keys If you are using Visual Radio with the fold closed volume bars and station information are displayed To turn the radio on or off and select the next or previous saved station use the media keys To adjust the volume use the volume keys If you are using Camera with the fold closed hold the device in landscape The outer display becomes the viewfinder To activate the camera press and hold _ amp _ To zoom in or out press the volume keys up or down To take a picture press _ amp _ To switch between Image mode and Video mode press Ea To make lighting and color adjustments before taking a picture press If to activate the toolbar and use the volume keys to scroll through the active toolbar See
101. lder QJ You have missed calls gf Shown if Ringing type is set to Silent qQ The device keypad is locked A clock alarm is active 2 The second phone line is being used network service A All calls to the device are diverted to another number If you have two phone lines network service a number indicates the active line Gp A compatible headset is connected to the device indicates the connection has been lost cD A compatible loopset is connected to the device lt r gt A compatible Text phone is connected to the device D A data call is active A GPRS packet data connection is active indicates the connection is on hold and T that a connection is available amp A packet data connection is active in a part of the network that supports EGPRS amp indicates the connection is on hold and that a connection is available The icons indicate that EGPRS is available in the network but your device is not necessarily using EGPRS in the data transfer 2S A UMTS packet data connection is active 52 indicates the connection is on hold and a that a connection is available Bluetooth connectivity is on 3 Data is being transmitted using Bluetooth connectivity When the indicator is blinking your device is trying to connect with another device lt la A USB connection is active Your Nokia Nze 17 x gt O gt 18 Power saver LED The display is switche
102. lect Options gt Rotate screen Text Search To search for keywords within the current web page select Options gt Find gt Text and enter a keyword To go to the previous match press 8 To go to the next match press g X Tip To search for keywords within the page press f Browser toolbar With the toolbar you can select most frequently used features in the browser To open the toolbar press and hold on an empty spot on a web page To move within the toolbar press or To select a feature press In the toolbar select from the following Frequently used links to view a list of the web addresses you visit frequently Page overview to view the overview of the current web page Find to search for keywords within the current page Reload to refresh the page Subscribe if available to view a list of available web feeds on the current web page and subscribe to a web feed Download and purchase items You can download items such as ringing tones images operator logos themes and video clips These items can be provided free of charge or you can purchase them Downloaded items are handled by the respective applications in your device for example a downloaded photo or an mp3 file can be saved in Gallery es Important Only install and use applications and other software from trusted sources such as applications that are Symbian Signed or have passed the Java Verified
103. less equipment in the area over the air bag or in the air bag deployment area If in vehicle wireless equipment is improperly installed and the air bag inflates serious injury could result Using your device while flying in aircraft is prohibited Switch off your device before boarding an aircraft The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft disrupt the wireless telephone network and may be illegal Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death Switch off the device at refueling points such as near gas pumps at service stations Observe restrictions on the use of radio equipment in fuel depots storage and distribution areas chemical plants or where blasting operations are in progress Areas with a potentially explosive atmosphere are often but not always clearly marked They include below deck on boats chemical transfer or storage facilities vehicles using liquefied petroleum gas such as propane or butane and areas where the air contains chemicals or particles such as grain dust or metal powders Emergency calls O Important Wireless phones including this
104. llic materials may be attracted to the device Do not place credit cards or other magnetic storage media near the device because information stored on them may be erased Medical devices Operation of any radio transmitting equipment including wireless phones may interfere with the functionality of inadequately protected medical devices Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy Implanted medical devices Manufacturers of medical devices recommend that a minimum separation of 15 3 centimeters 6 inches should be maintained between a wireless device and an implanted medical device such as a pacemaker or implanted cardioverter defibrillator to avoid potential interference with the medical device Persons who have such devices should Always keep the wireless device more than 15 3 centimeters 6 inches from the medical device when the wireless device is turned on Not carry the wireless device in a breast pocket e Hold the wireless device to the ear opposite the medical device to minimize the potential for interference e Turn the wireless device off immediately if there is any reason to suspe
105. ls press and select Tools gt Settings gt Phone gt Call Call divert Call barring or Network Call Send my caller ID You can set your phone number to be displayed to Yes or hidden from No the person to whom you are calling or the value may be set by your service provider when you make a subscription Set by network network service Call waiting If you have activated call waiting network service the network notifies you of a new incoming call while you have a call in progress Set the function on Activate or off Cancel or check whether the function is activated Check status Reject call with SMS Select Yes to send a text message to a caller informing why you could not answer the call See Answer or decline a call p 86 Message text Write a text to be sent in a text message when you reject a call Image in video call If video is not sent during a video call you can select a still image to be displayed instead 106 Automatic redial Select On and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt To stop automatic redialing press a Show call duration Activate this setting if you want the length of a call to be displayed during the call Summary after call To have the duration of a call briefly displayed after the call select On Speed dialling Select On and the numbers assigned to the speed dialing keys 2 9
106. m a collection of bookmarks in the Auto Bookmarks folder You can also enter the URL address of the web page you want to visit directly into the field indicates the starting page defined for the default access point You can save URL addresses as bookmarks while browsing on the internet You can also save addresses received in messages to your bookmarks and send saved bookmarks Your device may have preinstalled bookmarks and links for third party internet sites You may also access other third party sites through your device Third party sites are not affiliated with Nokia and Nokia does not endorse or assume liability for them If you choose to access such sites you should take precautions for security or content To open the bookmarks view while browsing press 1 or select Options gt Bookmarks To edit the details of a bookmark such as the title select Options gt Bookmark manager gt Edit In the bookmarks view you can also enter other browser folders The web browser allows you to save web pages during browsing In the Saved pages folder you can view the content of the pages you have saved offline The web browser also keeps track of the web pages you visit during browsing In the Auto Bookmarks folder you can view the list of visited web pages In Web Feeds you can view saved links to web feeds and blogs to which you have subscribed Web feeds are commonly found on major news organization web pages p
107. mail is quicker If there is no packet data coverage the device periodically tries to establish a packet data connection If you select When needed the device uses a packet data connection only if you start an application or action that needs it Access point The access point name is needed to use your device as a packet data modem to your computer Data call The data call settings affect all access points using a GSM data call connection Online time Set the data calls to automatically disconnect after a time out if there is no activity To enter a time out select User defined and enter the time in minutes if you select Unlimited data calls are not automatically disconnected SIP settings SIP session initiation protocol settings are needed for certain network services using SIP such as video sharing You may receive the settings in a special text message from your service provider You can view delete or create these setting profiles in SIP settings Configurations You may receive trusted server settings from your service provider in a configuration message You can save view or delete these settings in Configurations APN control With APN control service you can restrict packet data connections and allow your device to use only certain packet data access points This setting is only available if your SIM card supports the access point control service To set the control service on or off or to
108. mbers without a name to the topic list Other settings Press 3 and select Messaging gt Options gt Settings gt Other and from the following Save sent messages Select whether you want to save a copy of the text messages multimedia messages or e mail that you send to the Sent folder Number of saved msgs Define how many sent messages are saved to the Sent folder at a time When the limit is reached the oldest message is deleted Memory in use If a compatible memory card is inserted in the device select the memory where you want to save your messages Phone memory or Memory card IM instant messaging I5 Press and select Applications gt Media gt IM Instant messaging network service allows you to converse with other people using instant messages and join discussion forums IM groups with specific topics Various service providers maintain compatible IM servers that you can log in to after you register to an IM service Service providers may differ in their support of features Before you can use instant messaging you must define the settings to access the service that you want to use You may receive the settings in a special text message from the service provider that offers the IM service For more information on instant messaging see the guides for your device at www nseries com support or your local Nokia website YU wv 80 Make calls Voice calls 1 In the standby mode e
109. n a phone number to one of the speed dialing keys 2 9 press and select Tools gt Utilities gt O x 82 Speed dial Scroll to the key to which you want to assign the phone number and select Options gt Assign 1 is reserved for the voice or video mailbox and Q for Starting the web browser To call in the standby mode press the speed dial key and Um Voice dialing Your device supports enhanced voice commands Enhanced voice commands are not dependent on the speaker s voice so the user does not record voice tags in advance Instead the device creates a voice tag for the entries in contacts and compares the spoken voice tag to it The voice recognition in the device adapts to the main user s voice to recognize the voice commands better The voice tag for a contact is the name or nickname that is saved on the contact card To listen to the synthesized voice tag open a contact card scroll to the number with a voice tag and select Options gt Play voice tag Make a call with a voice tag PS Note Using voice tags may be difficult in a noisy environment or during an emergency so you should not rely solely upon voice dialing in all circumstances When you use voice dialing the loudspeaker is in use Hold the device at a short distance away when you say the voice tag 1 To start voice dialing in the standby mode press and hold the right selection key If a compatible headset with the headset key
110. n at the end of their working life Do not dispose of these products as unsorted municipal waste Return the products to collection to prevent possible harm to the environment or human health from uncontrolled waste disposal and to promote the sustainable reuse of material resources Collection information is available from the product retailer local waste authorities national producer responsibility organizations or your local Nokia representative For more information see product Eco Care and mainte 117 Declaration or country specific information at www nokia com Additional safety information Small children Your device and its enhancements may contain small parts Keep them out of the reach of small children Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1 5 centimeters 5 8 inches away from the body When a carry case belt clip or holder is used for body worn operation it should not contain metal and should position the device the above stated distance from your body To transmit data files or messages this device requires a quality connection to the network In some cases transmission of data files or messages may be delayed until such a connection is available Ensure the above separation distance instructions are followed until the transmission is completed Parts of the device are magnetic Meta
111. nection and is usually provided by the service provider Prompt password If you must enter the password every time you log in to a server or if you do not want to save your password in the device select Yes Password A password may be needed to make a data connection and is usually provided by the service provider Authentication Select Normal or Secure Homepage Depending on the access point you are setting up enter the web address or the address of the multimedia messaging center Select Options gt Advanced settings to change the following settings Network type Select the internet protocol type to use IPv4 or IPv6 The other settings depend on the selected network type Phone IP address for IPv4 only Enter the IP address of your device DNS address In Primary DNS address enter the IP address of the primary DNS server In Secondary DNS address enter the IP address of the secondary DNS server Contact your internet service provider to obtain these addresses Proxy server address Define the address for the proxy server Proxy port number Enter the proxy port number Packet data The packet data settings affect all access points using a packet data connection Packet data connection If you select When available and you are in a network that supports packet data the device registers to the packet data network Starting an active packet data connection for example to send and receive e
112. need with your service provider for the service you want to access For availability and subscription to packet data connection services contact your service provider Access points You may receive access point settings in a message from a service provider See Data and settings p 72 Some or all access points may be preset for your device by your service provider and you may not be able to change create edit or remove them amp indicates a protected access point and y Indicates a packet data access point To create a new access point select Options gt New access point To edit the settings of an access point select Options gt Edit Follow the instructions from your service provider Connection name Enter a descriptive name for the connection Data bearer Select the data connection type Depending on the data connection you select only certain setting fields are available Fill in all fields marked with Must be defined or with a red asterisk Other fields can be left empty unless you have been instructed otherwise by your service provider To be able to use a data connection the network service provider must support this feature and if necessary activate it for your SIM card Packet data access points Follow the instructions from your service provider Access point name You obtain the access point name from your service provider User name The user name may be needed to make a data con
113. ng 1 In Contacts select a contact 2 Select Options gt Defaults 3 Select a default to which you want to add a number or an address and select Assign 4 Select a number or an address you want to set as a default The default number or address is underlined in the contact card Copy contacts To copy names and numbers from a SIM card to your device press 3 and select Contacts gt Options gt SIM contacts gt SIM directory the names you want to copy and Options gt Copy to Contacts To copy contacts to your SIM card in Contacts select the names you want to copy and Options gt Copy to SIM directory or Options gt Copy gt To SIM directory Only the contact card fields supported by your SIM card are copied X lt Tip You can synchronize your contacts to a compatible PC with Nokia Nseries PC Suite SIM directory and other SIM services For availability and information on using SIM card services contact your SIM card vendor This may be the service provider or other vendor Press and select Contacts gt Options gt SIM contacts gt SIM directory to see the names and numbers stored on the SIM card In the SIM directory you can add edit or copy numbers to contacts and you can make calls To view the list of fixed dialing numbers select Options gt SIM contacts gt Fixed dial contacts This setting is only shown if supported by your SIM card To restrict calls from your device to selected
114. ng network service you can divert incoming fax calls to another phone number Battery informatior 114 Battery information Charging and discharging Your device is powered by a rechargeable battery The battery can be charged and discharged hundreds of times but it will eventually wear out When the talk and standby times are noticeably shorter than normal replace the battery Use only Nokia approved batteries and recharge your battery only with Nokia approved chargers designated for this device If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery Unplug the charger from the electrical plug and the device when not in use Do not leave a fully charged battery connected to a charger since overcharging may shorten its lifetime If left unused a fully charged battery will lose its charge over time If the battery is completely discharged it may take several minutes before the charging indicator appears on the display or before any calls can be made Use the battery only for its intended purpose Never use any charger or battery that is damaged Do not short circuit the battery Accidental short circuiting can occur when a metallic object such as a coin clip or pen causes direct connection of the positive and negative terminals of the
115. nnection settings To edit the settings for the e mail you receive select Incoming e mail and from the following User name Enter your user name given to you by your service provider Password Enter your password If you leave this field blank you are prompted for the password when you try to connect to your remote mailbox Incoming mail server Enter the IP address or host name of the mail server that receives your e mail Access point in use Select an internet access point IAP See Access points p 108 Mailbox name Enter a name for the mailbox Mailbox type Defines the e mail protocol that your remote mailbox service provider recommends The options are POP3 and IMAP4 This setting cannot be changed Security ports Select the security option used to secure the connection to the remote mailbox Port Define a port for the connection APOP secure login for POP3 only Use with the POP3 protocol to encrypt the sending of passwords to the remote e mail server while connecting to the mailbox To edit the settings for the e mail you send select Outgoing e mail and from the following My e mail address Enter the e mail address given to you by your service provider Outgoing mail server Enter the IP address or host name of the mail server that sends your e mail You may only be able to use the outgoing server of your service provider Contact your service provider for more information Th
116. nt page as bookmark select Options gt Save as bookmark To use Visual history to view snapshots of the pages you have visited during the current browsing session select Back available if History list is set on in the browser settings or Options gt Navigation options gt History To go to a previously visited page select the page To save a page while browsing select Options gt Tools gt Save page You can save pages to the device memory or compatible memory card if inserted and browse them when offline You can also group the pages into folders To access the pages later in the bookmarks view select Saved pages To open a sublist of commands or actions for the currently open page select Options gt Service options if supported by the web page To allow or prevent the automatic opening of multiple windows select Options gt Window gt Block pop ups or Allow pop ups Shortcuts while browsing e Press 1 to open your bookmarks Press 2 to search for keywords in the current page Press 3 to return to the previous page Press to list all open windows Press to close the current window if two or more windows are open e Press 8 to show the page overview of the current page Press again to zoom in and view the desired section of the page Press Q to enter a new web address Press Q to go to the start page Press or to zoom the page in or out To switch between portrait and landscape views se
117. ntacts starting with the letters appear on the display X lt Tip To add and edit contact cards you can also use Nokia Contacts Editor available in Nokia Nseries PC Suite To attach a small thumbnail image to a contact card open the contact card and select Options gt Edit gt Options gt Add thumbnail The thumbnail image is shown when the contact calls To listen to the voice tag assigned to the contact select a contact card and Options gt Play voice tag See Voice dialing p 82 To send contact information select the card you want to send and Options gt Send business card gt Via text message Via multimedia or Via Bluetooth See Messaging p 69 and Send data using Bluetooth connectivity p 60 To add a contact to a group select Options gt Add to group shown only if you have created a group See Create contact groups p 92 To check to which groups a contact belongs select the contact and Options gt Belongs to groups To delete a contact card in Contacts select a card and press C To delete several contact cards at the same time press Q and Q to mark the contacts and press to delete Default numbers and addresses You can assign default numbers or addresses to a contact card In this way if a contact has several numbers or addresses you can easily call or send a message to the contact to a certain number or address The default number is also used in voice diali
118. ntains an update or repair to an existing application you can only restore the Original application if you have the original installation file or a full back up copy of the removed software package To restore the original application remove the application and install the application again from the Original installation file or the back up copy 95 P E 96 e The jar file is required for installing Java applications If it is missing the device may ask you to download it If there is no access point defined for the application you are asked to select one When you are downloading the jar file you may need to enter a user name and password to access the server You obtain these from the supplier or manufacturer of the application 1 To locate an installation file press and select Applications gt App mgr Alternatively search the device memory or a compatible memory card if inserted in File mgr or open a message in Messaging gt Inbox that contains an installation file 2 In App mgr select Options gt Install In other applications scroll to the installation file and press to start the installation During installation the device shows information about the progress of the installation If you are installing an application without a digital signature or certification the device displays a warning Continue installation only if you are sure of the origin and contents of the application To st
119. nter the phone number including the area code To remove a number press C For international calls press twice for the character replaces the international access code and enter the country code area code omit the leading zero if necessary and phone number 2 Press tem to call the number 3 Press ad to end the call or to cancel the call attempt Pressing m always ends a call even if another application is active Closing the fold does not end an active voice call To adjust the volume during a call use the volume keys on the side of your device If you have set the volume to Mute select Unmute first To make a call from Contacts press 5 and select Contacts Scroll to the desired name or enter the first letters of the name to the search field Matching contacts are listed To call press umm You must copy the contacts from your SIM card to Contacts before you can make a call this way See Copy contacts p 91 To call a recently dialed number in the standby mode press Nem Scroll to the number and press um To send an image or a video clip in a multimedia message to the other participant of the call select Options gt Send MMS in UMTS networks only You can edit the message and change the recipient before sending Press tum tosend the file to a compatible device network service To send DTMF tone strings for example a password select Options gt Send DTMF Enter the DTMF string or search
120. o forth To clear call duration timers select Options gt Clear timers For this you need the lock code See Phone and SIM card p 102 Packet data To check the amount of data sent and received during packet data connections press and select Tools gt Log gt Packet data For example you may be charged for your packet data connections by the amount of data sent and received Monitor all communication events Icons in Log are as follows Incoming 88 Outgoing tJ Missed communication events To monitor all voice calls text messages or data connections registered by the device press select Tools gt Log and press to open the general log Subevents such as a text message sent in more than one part and packet data connections are logged as one communication event Connections to your mailbox multimedia messaging center or web pages are shown as packet data connections To add an unknown phone number from Log to your contacts select Options gt Save to Contacts To filter the log select Options gt Filter and a filter To erase the contents of the log recent calls register and messaging delivery reports permanently select Options gt Clear log Select Yes to confirm To remove a single event from the log press To set the log duration select Options gt Settings gt Log duration If you select No log all the log contents recent calls register and messag
121. o select it press The available options vary depending on the capture mode You can also define whether the active toolbar is always visible on the display or activated by a key press If you want the active toolbar to be visible before and after taking a picture or recording a video select Options gt Show icons To view the active toolbar only when you need it select Options gt Hide icons Only the capture mode Before taking a picture or recording a video in the active toolbar select from the following JA to select the scene ZA to select the flash mode images only NB to activate the self timer images only See You in the picture self timer p 34 to activate the sequence mode images only See Take pictures in a sequence p 34 f to select a color effect AN to adjust white balance Po to adjust the exposure compensation images only to adjust light sensitivity images only The icons change to reflect the current status of the setting The available options vary depending on the capture mode and view you are in The active toolbar settings are not available for the secondary camera See also active toolbar options in After taking a picture p 31 After recording a video p 36 and Active toolbar p 39 in Gallery After taking a picture After you take a picture there are several things you can do with the image using the active toolbar in the main
122. oint Other service providers allow you to use a WAP access point In RealPlayer you can only open an rtsp URL address However RealPlayer recognizes an http link to a ram file To stream content over the air select a streaming link saved in Gallery on a web page or received in a text message or multimedia message Before live content begins streaming your device connects to the site and starts loading the content The content is not saved in your device j RealPlayer settings You may receive RealPlayer settings in a special message from the service provider See Data and settings p 72 For more information contact your service provider Select Options gt Settings and from the following Video to have RealPlayer automatically repeat video clips after they finish playing Streaming to select whether to use a proxy server change the default access point and set the port range used when connecting Contact your service provider for the correct settings Adobe Flash Player O To view play and interact with compatible flash files made for mobile devices press and select Applications gt Media gt Flash Player Scroll to a flash file and press Nokia Lifeblog WY To start Lifeblog on your device press and select Lifeblog Nokia Lifeblog is a combination of software for mobile phone and PC that keeps a multimedia diary of the items that you collect with your device Nokia Lifeblog
123. old areas When the device returns to its normal temperature moisture can form inside the device and damage electronic circuit boards e Do not attempt to open the device other than as instructed in this guide Do not drop knock or shake the device Rough handling can break internal circuit boards and fine mechanics Do not use harsh chemicals cleaning solvents or strong detergents to clean the device e Do not paint the device Paint can clog the moving parts and prevent proper operation e Use a soft clean dry cloth to clean any lenses such as camera proximity sensor and light sensor lenses e Use only the supplied or an approved replacement antenna Unauthorized antennas modifications or attachments could damage the device and may violate regulations governing radio devices e Use chargers indoors e Always create a backup of data you want to keep such as contacts and calendar notes e To reset the device from time to time for optimum performance power off the device and remove the battery These suggestions apply equally to your device battery charger or any enhancement If any device is not working properly take it to the nearest authorized service facility for service Disposal The crossed out wheeled bin symbol on your product ps literature or packaging reminds you that in the European Union all electrical and electronic products batteries and accumulators must be taken to separate collectio
124. om the device memory to a compatible memory card if available select Options gt Back up phone memory The device notifies you if the memory card does not have enough free space to create a back up To restore information from the compatible memory card to the device memory select Options gt Restore from card When a memory card is reformatted all data on the card is permanently lost Some memory cards are supplied preformatted and others require formatting Consult your retailer to find out if you must format the memory card before you can use it To format a memory card select Options gt Format memory card Select Yes to confirm File manager Sj To browse files and folders in the device memory or on a compatible memory card if inserted press and select Tools gt File mgr The device memory view _ Your Nokia I 19 opens Press 9 to open the memory card view IHE if available To mark several files press and hold amp while you press e g or To move or copy the files to a folder select Options gt Move to folder or Copy to folder To find a file select Options gt Find and the memory from which to search Enter a search text that matches the file name To view what types of data you have in the device and how much memory the different data types consume select Options gt Memory details The amount of available free memory is shown in Free memory Memory low f
125. om the following To use the standby display for fast access to your most frequently used applications see Active standby mode p 50 To change the standby mode background image or what is shown in the screen saver see Change the look of your device p 49 To change the look of the cover display see Cover display p 50 To customize the ringing tones see Profiles set tones p 48 and Add ringing tones for contacts p 92 To change the shortcuts assigned for the different presses of the scroll key and left and right selection keys in the standby mode see Standby mode p 100 To change the clock shown in the standby mode press amp 3 and select Applications gt Clock gt Options gt Settings gt Clock type gt Analogue or Digital To change the welcome note to an image or animation press 3 and select Tools gt Settings gt General gt Personalisation gt Display gt Welcome note logo To change the main menu view in the main menu select Options gt Change Menu view gt Grid or List To rearrange the main menu in the main menu select Options gt Move Move to folder or New folder You can move less used applications into folders and place applications that you use more often into the main menu Profiles set tones 2 Ld To set and customize the ringing tones message alert tones and other tones for different events environments or caller groups press and
126. ompatible memory card if inserted are indicated with To open a file press Video clips ram files and streaming links are opened and played in RealPlayer and music and sound clips in Music player See RealPlayer p 27 and Music player p 21 To copy or move files to the memory card if inserted or to device memory select a file and Options gt Move and copy gt Copy to memory card or Move to memory card or Copy to phone mem or Move to phone mem Images and video clips Pictures taken and video clips recorded with the camera are Stored in the Images amp video folder in Gallery Images and video clips can also be sent to you in a multimedia message as an e mail attachment or through Bluetooth connectivity To be able to view a received image or video clip in Gallery or in a media player you must save it in the device memory or on a compatible memory card if inserted Select Gallery gt Images amp video The images and video clip files are in a loop and ordered by date and time The number of HS displayed To browse the files one select Options gt Rotate display The content in the Images amp video folder is shown in the selected mode When the image is opened to zoom in an image press the zoom keys on the side of your device The zooming ratio is not stored permanently To rotate the selected image left or right select Options gt Rotate gt Left or Right To print your
127. on number PIN code request may not be allowed by some SIM cards PIN code PIN2 code and Lock code You can change the lock code PIN code and PIN2 code These codes can only include the numbers from O to 9 If you forget any of these codes contact your service provider See Glossary of PIN and lock codes p 103 Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number Keypad autolock period Select whether the keypad is locked when your device has been idle for a certain period of time 29s Tip To lock or unlock the keypad manually press 7 then Phone autolock period To avoid unauthorized use you can set a time out after which the device automatically locks A locked device cannot be used until the correct lock code is entered To turn off the autolock period select None See Glossary of PIN and lock codes p 103 When the device is locked calls may be possible to the official emergency number programmed into your device X Tip To lock the device manually press A list of commands opens Select Lock phone Lock if SIM card changed You can set the device to ask for the lock code when an unknown SIM card is inserted into your device The device maintains a list of SIM cards that are recognized as the owner s cards Closed user group You can specify a group of people to whom you can call and who can call you network service
128. op you may be able to edit the settings by selecting Options gt Settings Transfer music You can transfer music from a compatible PC or other compatible devices using a compatible USB cable or Bluetooth connectivity For details see Bluetooth connectivity p 59 m To refresh the library after you have updated the song selection in your device in the Music menu select Options gt Refresh Music library The requirements of the PC for music transfer e Microsoft Windows XP operating system or later e A compatible version of Windows Media Player _ application You can get more detailed information about Windows Media Player compatibility from the Nokia N76 section of the Nokia website e Nokia Nseries PC Suite Transfer music from PC You can use three different methods to transfer music Media applicati 24 e To view your device on a compatible PC as an external hard drive where you can transfer any data files make the connection with a compatible USB cable or Bluetooth connectivity If you are using the USB cable select Data transfer as the connection mode A compatible memory card needs to be inserted in the device e To synchronize music with Windows Media Player connect the compatible USB cable and select Media player as the connection mode A compatible memory card needs to be inserted in the device e To use Nokia Music Manager in Nokia Nseries PC Suite connect the compatible U
129. opens 5 To preview the custom muvee before saving it select Options gt Play 6 To save the muvee select Options gt Save To create a new custom muvee by using the same style settings select Options gt Recreate Select content To edit the selected video clips in the Videos amp images folder select Options gt Select contents You can select which parts of the video clip you want to include or exclude in the muvee In the slide green indicates included red indicates excluded and grey indicates neutral parts To include a part of the video clip in the muvee scroll to 1 the part and select Options gt Include To exclude a part select Options gt Exclude To exclude a shot select Options gt Exclude shot To let Movie director randomly include or exclude a certain part of the video clip scroll to the part and select Options gt Mark as neutral To randomly include or exclude parts of the clip select Options gt Mark all as neutral Settings In the style selection view select Options gt Customise gt Settings to edit the following options Memory in use Select where to store your muvees Resolution Select the resolution of your muvees Select Automatic to use the optimal resolution based on the number and length of the video clips you have selected Default muvee name Set a default name for the muvees Slide show In the active toolbar select Start slide show gl to
130. or mobile devices and use extensible hypertext markup language XHTML or the wireless markup language WML With Web you can zoom in and out on a page use Mini Map and page overview to navigate on pages read web feeds and blogs bookmark web pages and download content Check the availability of services pricing and fees with your service provider Service providers will also give you instructions on how to use their services To use the web browser you need an access point to connect to internet See Access points p 108 Connection security If the security indicator is displayed during a connection the data transmission between the device and the internet gateway or server is encrypted The security icon does not indicate that the data transmission between the gateway and the content server or place where the requested resource is stored is secure The service provider secures the data transmission between the gateway and the content server Security certificates may be required for some services such as banking services You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device For more information contact your service provider See also Certificate management p 103 for more information on the certificates and certificate details Bookmarks view The bookmarks view allows you to select web addresses from a list or fro
131. ot started yet Invalid keys View keys that are not valid the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key Not in use View keys that have no media files connected to them in the device To buy more usage time or extend the usage period for a media file select an invalid activation key and Options gt Get new key Activation keys cannot be updated if web service message reception is disabled See Web service messages p 72 To view detailed information such as the validity status and ability to send the file scroll to an activation key and press Voice commands You can use voice commands to control your device For more information about the enhanced voice commands supported by your device see Voice dialing p 82 To activate enhanced voice commands for starting applications and profiles you must open the Voice comm application and its Profiles folder Press and select Tools gt Utilities gt Voice comm gt Profiles the device creates voice tags for the applications and profiles To use enhanced voice commands press and hold in the Standby mode and say a voice command The voice command is the name of the application or profile displayed in the list To use enhanced voice commands when the fold is closed press and hold the forward key To add more applications to the list select Options gt Ne
132. otal assurance of the authenticity of the battery If you have any reason to believe that your battery is not an authentic original Nokia battery you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for assistance Your authorized Nokia service point or dealer will inspect the battery for authenticity If authenticity cannot be verified return the battery to the place of purchase Authenticate hologram 1 When looking at the hologram on the label you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle 2 When you angle the hologram left right down and up you should see 1 2 3 and 4 dots on each side respectively 3 Scratch the side of the label to reveal a 20 digit code for example 12345678919876543210 Turn the battery so that the numbers are facing upwards The 20 digit code reads starting from the number at the top row followed by the bottom row 4 Confirm that the 20 digit code is valid by following the instructions at www nokia com batterycheck Battery informat WRF SON me CRX W L To create a text message enter the 20 digit code for example 12345678919876543210 and send to 44 7786 200276 To create a text message for India only Enter Battery followed by the 20 digit battery code for example Battery 12345678919876543210 and send to 5555 National
133. ou enter are added to Subject In the to do view a to do note entry opens When the calendar alarms for a note select Silence to turn off the calendar alarm tone The reminder text stays on the screen To end the calendar alarm select Stop To set the alarm to snooze select Snooze You can synchronize your calendar with a compatible PC using Nokia Nseries PC Suite When creating a calendar entry set the desired synchronisation option Calendar views Select Options gt Settings to change the starting day of the week or the view that is shown when you open the calendar To go to a certain date select Options gt Go to date To jump to today press To switch between the month view week view day view and to do view press To send a calendar note to a compatible device select Options gt Send If the other device is not compatible with Coordinated Universal Time UTC the time information of received calendar entries may not be displayed correctly To modify the calendar select Options gt Settings gt Calendar alarm tone Default view Week starts on and Week view title Manage your calendar entries To delete more than one event at a time go to the month view and select Options gt Delete entry gt Before date or All entries To mark a task as completed scroll to it in the to do view and select Options gt Mark as done Messaging ag Press and select Messaging network service
134. ou make Specific arrangements with your service provider before you can use the network services Your service provider can give you instructions and explain what charges will apply Some networks may have limitations that affect how you can use network services For instance some networks may not support all language dependent characters and services Your service provider may have requested that certain features be disabled or not activated in your device If so these features will not appear on your device menu Your device may also have a special configuration such as changes in menu names menu order and icons Contact your service provider for more information This device supports WAP 2 0 protocols HTTP and SSL that run on TCP IP protocols Some features of this device such as MMS browsing and e mail require network support for these technologies L Enhancements batteries and chargers Always switch the device off and disconnect the charger before removing the battery Check the model number of any charger before use with this device This device is intended for use when supplied with power from a AC 3 or AC 4 charger and from an AC 1 ACP 8 ACP 9 ACP 12 or LCH 12 charger when used with a CA 44 charger adapter The battery intended for use with this device is BL 4B le Warning Use only batteries chargers and enhancements approved by Nokia for use with this particular model The use of any other types m
135. pened automatically after downloading Preview confirmation Select No if you want to automatically download a preview of the content or application Select Yes if you want to be asked separately each time before downloading a preview Buy confirmation Select Yes if you want to be asked for confirmation before buying content or an application If you select No the buying process starts immediately after you select the option Buy After you complete the settings select Back Time management Clock D Press 3 and select Applications gt Clock To view your active and inactive alarms press 89 To set a new alarm select Options gt New alarm When an alarm is active is Shown To turn off the alarm select Stop To stop the alarm for 5 minutes select Snooze If the alarm time is reached while the device is switched off the device switches itself on and starts sounding the alarm tone If you select Stop the device asks whether you want to activate the device for calls Select No to switch off the device or Yes to make and receive calls Do not select Yes when wireless phone use may cause interference or danger To cancel an alarm select Applications gt Clock gt Options gt Remove alarm To change clock settings select Applications gt Clock gt Options gt Settings gt Time or Date Clock type or Clock alarm tone To allow the mobile phone network to update the time date and time zone informa
136. per or screen saver Closing animation Select a short animation to play when you close the cover Closing tone Select a short tune to play when you close the cover Opening tone Select a short tune to play when you open the cover and the device is in the standby mode Active standby mode The active standby display shows application shortcuts and events from applications such as calendar and player To switch the active standby on or off press 3 and select Tools gt Settings gt General gt Personalisation gt Standby mode gt Active standby Scroll to an application or event and press i TELECOM Fr 13 10 2006 VU Q ane dL The standard scroll key shortcuts available in the FY ee bY standby mode cannot be used I TESA when the active standby 12 00 Lunch mode is on To change the default applications shortcuts press amp 3 and select Tools gt Settings gt General gt Personalisation gt Standby mode gt Active standby apps Personalize your d Some shortcuts may be fixed and you cannot change them 51 gt 2 B B O 52 Web browser Press 4 and select Web network service X Shortcut To start the web browser press and hold 0 inthe standby mode With the web browser you can view hypertext markup language HTML web pages on the internet as originally designed You can also browse web pages that are designed specifically f
137. recipient including the country code and select OK to send the invitation 3 Sharing begins automatically when the recipient accepts the invitation 4 Select Pause to pause the sharing session Select Continue to resume sharing To fast forward or rewind the video clip press 6 or To play the clip again press Play 5 Toend the sharing session select Stop To end the voice call press sad Video sharing also ends if the active voice call ends To save the live video you shared select Save to accept the Save shared video clip query The shared video is saved in the Images amp video folder in Gallery If you access other applications while you are sharing a video clip the sharing is paused To return to the video Sharing view and continue sharing in the active standby 86 mode select Options gt Continue See Active standby mode p 50 Accept an invitation When someone sends you a share invitation an invitation message is displayed showing the sender s name or SIP address If your device is not set to Silent it rings when you receive an invitation If someone sends you a share invitation and you are not within UMTS network coverage you will not know that you received an invitation When you receive an invitation select from the following Accept to activate the sharing session Reject to decline the invitation The sender receives a message that you rejected the invitation You can
138. ree memory Many features of the device use memory to store data The device notifies you if the device or the memory card memory is low To free device memory transfer data to a compatible memory card if available or to a compatible PC To remove data to free memory use File manager to delete files you no longer need or go to the respective application For example you can remove the following e Messages in the folders in Messaging and retrieved e mail messages from the mailbox e Saved web pages Contact information Calendar notes e Applications shown in App manager that you do not need Installation files sis of applications you have installed to a compatible memory card first back up the installation files to a compatible PC Media applications Music player fi Music player supports files formats such as AAC eAAC eAAC MP3 and WMA Music player does not necessarily support all features of a file format or all the variations of file formats ep Warning Listen to music at a moderate level Continuous exposure to high volume may damage your hearing Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud You can listen to music with the fold open or closed If you are listening to music when a call comes in the music pauses when you answer the call and resumes shortly after the end of the call For how to add songs to your device see Transf
139. rmation visit www adobe com To share questions suggestions and information about the application visit the Adobe Reader for Symbian OS user forum at http adobe com support forums main html Converter gt To convert measures from one unit to another press and select Applications gt Office gt Converter Converter has limited accuracy and rounding errors may occur 1 In the Type field select the measure you want to use 2 In first Unit field select the unit from which you want to convert In the next Unit field select the unit to which you want to convert 3 Inthe first Amount field enter the value you want to convert The other Amount field changes automatically to show the converted value 94 Set base currency and exchange rates Select Type gt Currency gt Options gt Currency rates Before you can make currency conversions you must select a base currency and add exchange rates The rate of the base currency is always 1 b gt Note When you change base currency you must enter new exchange rates because all previously set exchange rates are cleared PPL Notes To write notes in txt format press and select Applications gt Office gt Notes Recorder P To record voice memos press 5 and select Applications gt Media gt Recorder To record a telephone conversation open Recorder during a voice call Both parties hear a tone every 5 seconds during recording Wirele
140. rovider select Options gt Service command in the main view of Messaging Cell broadcast network service allows you to receive messages on various topics such as weather or traffic conditions from your service provider For available topics and relevant topic numbers contact your service provider N In the main view of Messaging select Options gt Cell i _ A broadcast Cell broadcast messages cannot be received in UMTS networks A packet data connection may prevent cell broadcast reception i a D Ey N U 70 Text modes ABC abc and Abc indicate the selected character mode 123 indicates the number mode To switch between the letter and number mode press and hold To switch between the different character modes press To insert a number in the letter mode press and hold the desired number key NA is displayed when you write text using traditional text Input and NA when using predictive text input With predictive text you can enter any letter with a single keypress Predictive text input is based on a built in dictionary to which you can add new words To activate predictive text input press and select Activate predictive text Y lt Tip To turn predictive text input on or off quickly press twice Write and send messages Before you can create a multimedia message or write an e mail you must have the correct connection settings in place See E mai
141. ry See Gallery p 38 The maximum length of the video is 60 minutes if enough memory available To record videos using the main display as the viewfinder fold open do the following 1 If the camera is in the Image mode select Switch to video mode from the active toolbar 2 To start recording press amp The red record icon is shown and a tone sounds indicating that recording has started 3 To stop recording press _ or select Stop The video clip is automatically saved to Images amp video in Gallery See Images and video clips p 38 The maximum length of the video is 60 minutes if enough memory available To pause recording at any time select Pause The pause icon ff blinks on the display Video recording automatically stops if recording is set to pause and there are no keypresses within a minute Select Continue to resume recording To zoom in or out of the subject press the volume keys on the side of the device To make lighting and color adjustments before recording a video use the scroll key to scroll through the active toolbar See Setup settings color and lighting p 33 and scenes bs 33 To free memory before recording a video select Options gt Go to free memory only available if you have backed up images or video clips See Free memory p 40 To activate the front camera select Options gt Use secondary camera 36 Video capture indicators
142. s activated When the display is switched off an LED blinks to indicate that the device is powered on Enhancement For enhancement indicators see Essential indicators p 17 Some enhancement connectors do not indicate which type of an enhancement is connected to the device The available settings depend on the type of enhancement Select an enhancement and from the following 102 Default profile Set the profile that you want activated each time you connect a certain compatible enhancement to your device See Profiles set tones p 48 Automatic answer Set if you want the device to answer an incoming call automatically after 5 seconds If the ringing type is set to Beep once or Silent automatic answer Is disabled Lights Set whether lights remain on or are switched off after the time out This setting is not available for all enhancements If you are using a Text phone or a Loopset you must activate it on your device To activate Text phone select Text phone gt Use text phone gt Yes To activate the loopset select Loopset gt Use loopset gt Yes Security To edit settings related to the security press 5 and select Tools gt Settings gt General gt Security gt Phone and SIM card Certificate management or Security module Phone and SIM card PIN code request When active the code is requested each time the device is switched on Deactivating the personal identificati
143. s on your messages network service Message validity Select how long the message center resends your message if the first attempt fails network service If the message cannot be sent within the validity period the message is deleted from the message center Message sent as Contact your service provider to learn if your message center is able to convert text messages into these other formats Preferred connection Select the connection to be used Reply via same centre Select whether you want the reply message to be sent using the same text message center number network service Multimedia messages Press and select Messaging gt Options gt Settings gt Multimedia message and from the following Image size Define the size of the image in a multimedia message MMS creation mode If you select Guided the device informs you if you try to send a message that may not be Mes supported by the recipient If you select Restricted the device prevents you from sending messages that may not be supported To include content in your messages without notifications select Free Access point in use Select which access point is used as the preferred connection Multimedia retrieval Select how you want to receive messages To receive messages automatically in your home cellular network select Auto in home netw Outside your home cellular network you receive a notification that there is a m
144. se the volume may be extremely loud To view available stations based on location select Options gt Station directory network service To save the current tuned station to your station list select Options gt Save station To open the list of your saved Stations select Options gt Stations To return to the standby mode and leave the FM radio playing in the background select Options gt Play in background View visual content To check availability and costs and to subscribe to the service contact your service provider To view available visual content for a tuned station select Options gt Start visual service If the visual service ID has not been saved for the station enter it or select Retrieve to search for it in the station directory network service When the connection to the visual service is established the display shows the current visual content Saved stations To open the list of your saved stations when the fold is open select Options gt Stations To listen to a saved station select Options gt Station gt Listen To view available visual content for a station with Visual Radio service select Options gt Station gt Start visual service To switch between the list of your saved stations and listening to a saved station when the fold is closed press C To change station details select Options gt Station gt Edit X Tip You can add shortcuts to saved stations in the multime
145. sible on the display or activated by a keypress If you want the active toolbar to be visible on the display select Options gt Show icons If you want the active toolbar to be visible only when you need it select Options gt Hide icons To activate the active toolbar press Select from the following gt to play the selected video clip M to send the selected image or video clip to add or remove an image from the Print Basket See Print Basket p 40 man to view the images in the Print Basket to start a slide show of your images to delete the selected image or video clip fam to print the viewed image wa to reduce the resolution of the selected image to free memory for new images See Free memory p 40 The available options may vary depending on the view you are in Print Basket You can tag images to the Print Basket and print them later with a compatible printer or in a compatible printing kiosk if available See Image print p 41 The tagged images are indicated with a in the Images amp video folder and albums To tag an image for later printing select an image and Add to Print Basket from the active toolbar To view the images in the Print Basket select View Print Basket from the active toolbar or select amp from the Images amp video folder available only when you have added pictures to the Print Basket To remove an image from the Print Basket select an image
146. sired access point for updating Connections r Connection manager 24 Data connections Press j and select Tools gt Connectivity gt Conn mgr Active data connections Data calls are indicated by D high speed data calls by D and packet data connections by PS Note The actual time invoiced for calls by your service provider may vary depending on network features rounding off for billing and so forth To end a connection select Options gt Disconnect To close all open connections select Options gt Disconnect all To view the details of a connection select Options gt Details The details shown depend on the connection type Bluetooth connectivity You can connect wirelessly to other compatible devices with wireless Bluetooth technology Compatible devices may include mobile phones computers and enhancements such as headsets and car kits You can use Bluetooth connectivity to send images video clips music and sound clips and notes connect wirelessly to your compatible PC for example to transfer files connect to a compatible printer to print images with Image print See Image print p 41 Since devices with Bluetooth wireless technology communicate using radio waves your device and the other device do not need to be in direct line of sight The two devices only need to be within 10 meters 33 feet of each other but the connection may be subject to interference from obstr
147. six mailboxes Open the mailbox When you open the mailbox the device asks if you want to connect to the mailbox Connect to mailbox To connect to your mailbox and retrieve new e mail headings or messages select Yes When you view messages online you are continuously connected to a remote mailbox using a data connection To view previously retrieved e mail messages offline select No To create a new e mail message select New message gt E mail in the messaging main view or Options gt Create message gt E mail in your mailbox See Write and send messages p 70 Retrieve e mail messages If you are offline select Options gt Connect to start a connection to the remote mailbox Q Important Exercise caution when opening messages E mail messages may contain malicious software or otherwise be harmful to your device or PC 1 When you have an open connection to a remote mailbox select Options gt Retrieve e mail and one of the following New to retrieve all new messages Selected to retrieve only the messages that have been marked All to retrieve all messages from the mailbox To stop retrieving messages select Cancel 74 If you want to close the connection and view the e mail messages offline select Options gt Disconnect To open an e mail message press If the e mail message has not been retrieved and you are offline you are asked if you want to retrieve this message from the
148. ss Keyboard p To set up a compatible wireless keyboard supporting the Bluetooth human interface devices HID profile for use with your device use the Wireless keybd application The keyboard enables you to enter text in comfort using the full QWERTY layout for text messages e mail and calendar entries 1 Activate Bluetooth connectivity on your device 2 Switch on the keyboard 3 Press 5 and select Tools gt Connectivity gt Wireless keybd 4 Select Options gt Find keyboard to start searching for devices with Bluetooth connectivity 5 Select the keyboard from the list and press the connection 6 To pair the keyboard with your device enter a passcode of your choice 1 to 9 digits on the device and the same passcode on your keyboard To enter the digits of the passcode you may need to press the Fn key first 7 Ifyou are asked for a keyboard layout select it from a list on your device 8 When the name of the keyboard appears its status changes to Keyboard connected and the green indicator of your keyboard blinks slowly the keyboard is ready for use For details on the operation and maintenance of your keyboard see its user guide Tools Ge Application manager ag Press and select Applications gt App mgr You can install two types of applications and software to your device e J2ME applications based on Java technology with the extension jad or jar 2g e Other applic
149. suas wee usauscessensesueecenesacuhecgsegeeesueseescsecsant 12 Still image camera settings OOE ETE 32 Keys and navigation ssssssssssssssesssseetsnsssssssssssssessssensnnennn 14 ES atann enata 33 Transfer content from another deite ssssiisisisesi 16 Setup settings color and lighting essssssssssssssssssse Ja Essential indicators ssssssssssssssssssssssssansssssssssssssssssssssnennen C O A EA E 33 Power saver LED ERPE E AE E E E E E PE E E AE 18 Take pictures in a sequence n 34 Volume and loudspeaker control ssssssssssssssseseeenen 18 You in the picture self timer s ccsssssssssssssssssssssssssssssee 34 Keypad lock keyguard sinssissussscoccessiintitettessirtieenizatieric to Record videOSsnsrsme aarti 35 HCIdSE E ecce 18 Memory Card seeiis esinistrrnabtiaeauierioet 19 Gallery a a aaa a a a 38 AE E e ve en E PO 40 AOU eee rele ea a a ee ees 40 Free VCO a ceanstcatoscasatcneseenaatahtncancisacdueaanenitilaamtannctemetiaciits 40 E cnae eines E E E pee 41 PAAT 0 UNG oisinn 42 Onne Shari esise 42 EUU WINN Ne oei yettne pet ctetao occasion 42 Edit videO CDS asirese eet i 43 Add images video sound and text ssececeeesseeeeeees 43 Cur video CIID resan 44 Send videos sessssesssssenssnesnsrnnneesnenreneonsunnsnnnneunenronnnnnnnnnnennennene 44 Movie diretor ouside sides cess an sani has ainn aiiai 44 Sde SNOW earranan aeaaaee 46 Presentations siitokseen koa an nasa n iain 47 Personalize your device sssssssssessnennnnnnnns
150. t shown correctly you can select another encoding according to language for the current page Font size Define the font size that is used for web pages Block pop ups Allow or block automatic opening of different pop ups while browsing Automatic reload If you want the web pages to be refreshed automatically while browsing select On Privacy settings Auto bookmarks Enable or disable automatic bookmark collecting If you want to continue saving the addresses of the visited web pages into the Auto Bookmarks folder but hide the folder from the bookmarks view select Hide folder Form data saving If you do not want the data you enter to different forms on a web page to be saved and used next time the page is entered select Off Cookies Enable or disable the receiving and sending of cookies Serial no sending To send the serial number of your device as your user identification when requested by web services select On if available Web feeds settings Automatic updates Define whether you want the web feeds to be updated automatically or not and how often you want to update them Setting the application to retrieve web feeds automatically may involve the transmission of large amounts of data through your service provider s network Contact your service provider for information about data transmission charges Acc point for auto update only available when Automatic updates is on Select the de
151. taking pictures release the capture key After you take the pictures they are shown in a grid on the display To view a picture press to open it You can also use the sequence mode with the self timer When using the self timer the maximum number of pictures Is Six To return to the sequence mode viewfinder press the capture key You in the picture self timer The self timer is available only in the main camera Use the self timer to delay the capture so that you can include yourself in the picture To set the self timer delay in the active toolbar select Self timer gt 2 seconds 10 seconds or 20 seconds To activate the self timer select Activate The self timer indicator blinks and the device beeps when the timer is running The camera takes the picture after the selected delay elapses To switch off Self timer in the active toolbar select Self timer gt Off J Tip In the active toolbar select Self timer gt 2 seconds to keep your hand steady when taking a picture Record videos To record videos using the cover display as the viewfinder fold closed do the following 1 If the camera is in the Image mode press to switch to Video mode 2 Press __ to start recording The record icon is shown and a tone sounds indicating that recording has started 3 To stop recording press _ amp _ or select Stop The video clip is automatically saved to the Images amp video folder in Galle
152. tart to appear on the display 2 Select the device and enter the passcode The same passcode must be entered on the other device as well Some audio enhancements connect automatically to your device after pairing Otherwise scroll to the enhancement and select Options gt Connect to audio device Paired devices are indicated by y in the device search To set a device as authorized or unauthorized scroll to a device and select from the following options Set as authorised Connections between your device and this device can be made without your knowledge No separate acceptance or authorization is needed Use this status for your own devices such as your compatible headset or PC or devices that belong to someone you trust indicates authorized devices in the paired devices view Set as unauthorised Connection requests from this device must be accepted separately every time 61 a Connecti To cancel a pairing scroll to the device and select Options gt Delete If you want to cancel all pairings select Options gt Delete all Receive data using Bluetooth connectivity When you receive data through Bluetooth connectivity a tone sounds and you are asked if you want to accept the message If you accept D7 is shown and the item is placed in the Inbox folder in Messaging Messages received through Bluetooth connectivity are indicated by See Inbox receive messages p 71 Remote SIM mode
153. testing 1 To download the item select the link 2 Select the appropriate option to purchase the item for example Buy 3 Carefully read all the information provided To continue the download select OK To cancel the download select Cancel When you start a download a list of ongoing and completed downloads from the current browsing session is displayed To also view the list select Options gt Downloads In the list scroll to an item and select Options to cancel ongoing downloads or open save or delete completed downloads Mini Map Mini Map helps you to navigate on web pages that contain large amount of information When Mini Map is set on in the browser settings and you scroll through a large web page Mini Map opens and shows an overview of the web page you browse To scroll in Mini Map press 3 j G When you find the desired location ep scrolling and Mini Map disappears and leaves you at the selected location To set Mini Map on select Options gt Settings gt General gt Mini Map gt On 55 56 Page overview When you are browsing a web page that contains a large amount of information you can use page overview to view what kind of information the page contains To show the page overview of the current page press 8 oO Press again to zoom in ahd view ihe dena section of the page Web feeds and blogs Web feeds are xml files on web pages that are widely used by the weblo
154. the update select OK When asked select an internet access point Your device sends the software update status to the server To view the server profile settings used for software updates select Options gt Settings Server profiles To connect to a server and receive configuration settings for your device to create new server profiles or to view and manage existing server profiles press 3 and select Tools gt Utilities gt Device mgr You may receive server profiles and different configuration settings from your service providers and company information management department These configuration settings may include connection and other settings used by different applications in your device Scroll to a server profile and select Options and from the following Start configuration to connect to the server and receive configuration settings for your device New server profile to create a server profile To delete a server profile scroll to it and press C wv wap Download network service is a mobile content shop available on your device Download With Download you can discover preview buy download and upgrade content services and applications that work with your Nokia N76 Games ringing tones wallpapers applications and much more are right at hand The items are categorized under catalogs and folders provided by different service providers The available content depends on your service pro
155. tion to your device network service select Network operator time gt Auto update World clock To open the world clock view select Clock and press aa twice In the world clock view you can view the time in different cities To add cities to the list select Options gt Add city You can add a maximum of 15 cities to the list To set your current city scroll to a city and select Options gt Set as current city The city is displayed in the clock main view and the time in your device is changed according to the city selected Check that the time is correct and matches your time zone PPA Calendar 30 Press and select Calendar To add a new calendar entry scroll to the desired date select Options gt New entry and one of the following 1 Meeting to remind you of an appointment that has a specific date and time Memo to write a general entry for a day Anniversary to remind you of birthdays or special dates entries are repeated every year To do to remind you of a task that needs doing by a specific date Fill in the fields To set an alarm select Alarm gt On and enter the Alarm time and Alarm date To add a description foran entry select Options gt Add description 3 To save the entry select Done DIMM 30 riday 4 13 10 2006 gt 12 00 Lunch X Shortcut In the day week or month calendar view press any key 1 0 An appointment entry opens and the characters y
156. to the eye and press A loop appears on the display To resize the loop to fit the size of the eye use the scroll key To reduce the redness press Useful shortcuts Shortcuts in the image editor e To view an image in the full screen press To return to the normal view press x again e To rotate an image clockwise or counterclockwise press 3 or 1 e To zoom in or out press 5 or QO e To move on a zoomed image press 8 or Edit video clips To edit video clips in Gallery and create custom video clips scroll to a video clip and select Options gt Edit gt Merge Change sound Add text Cut or Create muvee The video editor supports 3gp and mp4 video file formats and aac amr mp3 and wav audio file formats XE Tip You can use Movie director to create custom video clips Select the video clips and images you want to create a muvee with and select Options gt Edit gt Create muvee See Movie director p 44 The custom video clips are automatically saved in the Images amp video in Gallery The clips are saved on the memory card If the memory card is not available the device memory is used Add images video sound and text You can add images video clips and text to a video clip selected in Gallery to create custom video clips To combine an image or a video clip with the selected video clip in the Images amp video folder select Options gt Edit gt Merge gt
157. twareupdate or your local Nokia web site Settings Your device normally has MMS GPRS streaming and mobile internet settings automatically configured in the device based upon your wireless service provider information You may have settings from your service providers already installed in your device or you may receive or request the settings from the service providers as a special message To change the general settings in your device such as language the standby mode and display settings see Phone p 105 Welcome When you switch on your device for the first time Welcome opens Select from the following Settings wizard to configure various settings Transfer to transfer content such as contacts and calendar entries from a compatible Nokia device See Transfer content from another device p 16 To open Welcome later press 3 and select Tools gt Utilities gt Welcome You can also access the individual applications in their own menu locations For more information on Settings wizard see the guides for your device at www nseries com support or your local Nokia website Modes Your device has two operating modes with the fold closed for access to particular features including Music player Radio Camera and Messaging and with the fold open for traditional mobile phone use and access to all the features on your device Fold closed cover display When the fold is closed the main disp
158. uctions such as walls or from other electronic devices This device is compliant with Bluetooth Specification 2 0 supporting the following profiles Advanced Audio Distribution Profile Audio Video Remote Control Profile Basic Imaging Profile Basic Printing Profile SIM Access Profile Dial up Networking Profile File Transfer Profile Generic Access Profile Generic Object Exchange Profile Hands Free Profile Headset Profile Human Interface Device Profile Object Push Profile Service Discovery Application Profile Serial Port Profile To ensure interoperability between other devices supporting Bluetooth technology use Nokia approved enhancements for this model Check with the manufacturers of other devices to determine their compatibility with this device 59 60 There may be restrictions on using Bluetooth technology in some locations Check with your local authorities or service provider Features using Bluetooth technology or allowing such features to run in the background while using other features increase the demand on battery power and reduce the battery life When the device is locked you cannot use Bluetooth connectivity See Phone and SIM card p 102 for more information on locking the device Settings Press 3 and select Tools gt Bluetooth When you open the application for the first time you are asked to define a name for your device Select from the following Bluetooth To connect wirel
159. ve toolbar 31 Adobe reader 93 alarm clock 67 application manager 95 applications installing 95 Java 95 removing 96 automatic answer 102 B backing up data 19 batteries authenticating 114 charging 114 intended for use 9 Bluetooth connectivity 59 device address 61 pairing 61 security 60 sending data 60 switching off 60 bookmarks 52 C cache clearing 56 calculator 93 calendar creating entries 67 synchronizing Nokia Nseries PC Suite 68 call log See og calls answering 86 barring 106 declining 86 diverting 106 duration 87 international 80 making 80 missed 87 received 87 settings 105 sharing video 84 transferring 87 waiting 87 camera active toolbar 30 adjusting lighting and color 33 editing videos 43 flash 33 fold closed mode 29 fold open mode 29 image setup settings 33 saving video clips 35 scenes 33 self timer 34 sequence mode 34 shooting video 35 still image camera settings 32 taking pictures 29 video recorder settings 36 capture key 15 cell broadcast 78 certificates 103 chargers 9 chat See instant messaging clock 67 codes 103 color tone 33 computer connections 63 conference call 81 configurations 110 connection settings 107 contact cards 90 inserting pictures 90 sending 90 contact information 11 converter 93 copying contacts between the SIM card and device memory 91 copyright protection See digital rights management cover display fold closed 13 personalisation
160. vice has context sensitive help When an application is open select Options gt Help to access help for the current view D a When you are reading the instructions to switch between a help and the application that is open in the background press and hold To open help from the main menu select Tools gt Utilities gt Help Select the desired application to view its help topics Get started See the get started guide for keys and parts information and instructions for setting up the device for use Additional applications There are various applications provided by Nokia and different third party software developers to help you do more with your Nokia N76 These applications are explained in the guides that are available at the Nokia N76 product support pages at www nseries com support or your local Nokia website 11 Your Nokia N76 Your Nokia 12 Software updates Nokia may produce software updates that may offer new features enhanced functions or improved performance You may be able to request these updates through the Nokia Software Updater PC application To update the device software you need the Nokia Software Updater application and a compatible PC with Microsoft Windows 2000 or XP operating system broadband internet access and a compatible data cable to connect your device to the PC To get more information and to download the Nokia Software Updater application visit www nokia com sof
161. vider Press and select Download Download uses your network services to access the most up to date content For information on additional items available through Download contact your service provider or the supplier or manufacturer of the item Download receives ongoing updates bringing you the latest content your service provider offers for your device To update the content in Download manually select Options gt Refresh list To hide a folder or a catalog from the list for example to view only the items you use frequently select Options gt Hide To make all the hidden items visible again select Options gt Show all To buy the selected item in the main view or in a folder or catalog select Options gt Buy A submenu opens where you can select the version of the item and view price information The available options depend on the service provider To download an item that is free of charge select Options gt Get A a Settings for Download The application updates your device with the most recent content available from your service provider and other available channels To change the settings select Options gt Settings and from the following Access point To select which access point is used to connect to the service provider s server and whether to have the device to ask for the access point every time you use Automatic open Select Yes if you want the content or application to be o
162. view a Slide show of images in full screen The slide show starts from the selected file Select from the following Pause to pause the slide show Continue to resume the slide show if paused End to close the slide show previous or next To adjust the tempo of the slide show before starting the slide show select Options gt Slide show gt Settings gt Delay between slides To browse the images press To make the slide show move smoothly from one slide to another and let the gallery randomly zoom in and out in the images select Zoom and pan To add sound to the slide show select Options gt Slide show gt Settings gt Music or Song To decrease or increase the volume use the volume keys in your device Presentations With presentations you can view SVG scalable vector graphics files such as cartoons and maps SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions To view SVG files select Presentations scroll to an image and select Options gt Play To pause playing select Options gt Pause To zoom in press 53 To zoom out press 0 To rotate the image 90 degrees clockwise or counter clockwise press 1 or 3 To rotate the image 45 degrees press f or 9 To switch between full screen and normal screen press x I NI O sh Personalize you 48 Personalize your device To personalize your device select fr
163. w application To add a second voice command that can be used to start the application select Options gt Change command and enter the new voice command as text Avoid very short names abbreviations and acronyms To listen to the synthesized voice tag select Options gt Playback To change voice command settings select Options gt Settings To switch off the synthesizer that plays recognized voice tags and commands in the selected device language select Synthesiser gt Off To reset voice recognition learning for example when the main user of the device has changed select Remove voice adapts Positioning Press and select Tools gt Connectivity gt GPS data or Landmarks The Global Positioning System GPS is operated by the government of the United States which is solely responsible for its accuracy and maintenance The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan Accuracy can also be affected by poor Satellite geometry Availability and quality of GPS signals may be affected by your location buildings natural obstacles and weather conditions The GPS receiver should only be used outdoors to allow reception of GPS signals GPS should only be used as a navigation aid It should not be used for precise location measurement
164. w opens 2 Select a style for the muvee from the style list 3 Select Options gt Create muvee Create a custom muvee 1 In Gallery select images and videos for the muvee and Options gt Edit gt Create muvee The style selection view opens 2 Scroll to the desired style and select Options gt Customise 3 Reorder and edit the selected items or add or remove items from your muvee in Videos amp images or Music In Videos amp images you can define the order in which the files are played in the muvee To select the file you want to move press Then scroll to the file below which you want to place the marked file and press To add or remove images and videos from the muvee select Options gt Add Remove To add albums and their content to the muvee in the image or video clip list view select Options gt Albums To cut the video clips In Videos amp images select Options gt Select contents See Select content p 46 In Message you can add an opening and closing text to a muvee In Length you can define the length of the muvee Select from the following Multimedia msg to optimize the length of the muvee for sending in a multimedia message Auto select to include all the selected images and video clips in the muvee Same as music to set the muvee duration to be the same as the chosen music clip User defined to define the length of the muvee 4 Select Options gt Create muvee The preview view
165. while taking a picture The camera has an LED flash for low light conditions The following flash modes are available for the still image camera Automatic HA On KJ R eye redu and Off SQ To change the flash mode in the active toolbar select the desired flash mode Setup settings color and lighting To enable the camera to reproduce colors and lighting more accurately or to add effects to your pictures or videos use the scroll key to scroll through the active toolbar and select from the following options White balance Select the current lighting condition from the list This allows the camera to reproduce colors more accurately Exposure compensation images only Adjust the exposure time of the camera Flash Select the desired flash mode See Flash p 33 Colour tone Select a color effect from the list Light sensitivity images only Select the light sensitivity of the camera The darker the environment the higher the light sensitivity should be The screen display changes to match any settings you make so that you see how the change affects the pictures or videos The available color and lighting settings vary depending on the selected camera and mode The settings return to the default settings when you close the camera If you select a new scene the color and lighting settings are replaced by the selected scene See Scenes p 33 You can change the setup settings after s
166. xceed the limits for exposure to radio waves recommended by international guidelines These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons regardless of age and health a The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR The SAR limit stated in the ICNIRP guidelines is 2 0 watts kilogram W kg averaged over 10 grams of tissue Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network That amount changes depending on a number of factors such as how close you are to a network base station The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 1 04 W kg Additional safety inform Use of device accessories and enhancements may result in different SAR values SAR values may vary depending on national reporting and testing requirements and the network band Additional SAR information may be provided under product information at www nokia com 121 Index A access point name control 110 access points 107 activation keys See digital rights management active standby mode 50 acti
167. y is on You can also assign keypad shortcuts for the different presses of the scroll key The scroll key shortcuts are not available if the active standby is on Operator logo This setting is only available if you have received and saved an operator logo Select Off if you do not want the logo to be shown Language Phone language Changing the language of the display texts in your device also affects the format used for date and time and the separators used for example in calculations Automatic selects the language according to the information on your SIM card After you change the display text language the device restarts Changing the settings for Phone language or Writing language affects every application in your device and the change remains effective until you change these settings again Writing language Changing the language affects the characters and special characters available when writing text and the predictive text dictionary used Predictive text Set the predictive text input On or Off for all editors in the device The predictive text dictionary is not available for all languages Cover display Brightness Close the fold and use the volume key to adjust the brightness on the cover display m Answer if fold opened Select Yes if you want to answer incoming calls by opening the fold Sleep mode Select whether the display is switched off to save battery power after the power saver i

Nokia N76 Cell Phone User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents