Home

Nokia 9356900 issue 1 Telephone User Manual

1. No SMS DELIVER indications are routed to the TE If SMS DELIVER is stored into the Nokia 22 an indication of the memory location is routed to the TE using an unsolicited result code CMTI lt mem gt lt index gt SMS DELIVERs except for class 2 messages and messages in the message waiting indication group store message are routed directly to the TE using an unsolicited result code CMT lt length gt lt CR gt lt LF gt lt pdu gt PDU mode enabled or CMT lt oa gt lt scts gt lt tooa gt lt fo gt lt pid gt lt dcs gt lt sca gt lt tosca gt lt length gt lt CR gt lt LF gt lt data gt text mode enabled about parameters in italics refer to the command Show Text Mode Parameters CSDH Class 2 messages and messages in the message waiting indication group store message result in an indication as defined in lt mt gt 1 Class 3 SMS DELIVERs are routed directly to the TE using unsolicited result codes defined in lt mt gt 2 The messages of other data coding schemes result in an indication as defined in lt mt gt 1 lt bm gt the rules for storing received CBMs depend on its data coding scheme refer GSM 03 38 the setting of the Select CBM Types CSCB and this value 0 No CBM indications are routed to the TE 2 New CBMs are routed directly to the TE using an unsolicited result code CBM lt length gt lt CR gt lt LF gt lt pdu gt PDU mode enabled or CBM lt sn gt lt mid gt lt dcs gt lt
2. NOKIA List of AT Commands for Nokia 22 lt type gt type of address octet in integer format refer GSM 04 08 10 5 4 7 129 unknown telephony 145 international telephony 7 10 CUSD Unstructured supplementary service data Command Response cme error Set CUSD lt n gt lt str gt lt dcs gt CUSD lt m gt cstr gt lt des gt oo x CUSD CUSD lt n gt es ll CUSD CUSD 0 1 ee Keen The CUSD command allows the controlling of the Unstructured Supplementary Service Data USSD according to GSM 02 90 Both network and mobile initiated operations are supported The parameter lt n gt is used to disable and enable the presentation of an unsolicited result code network initiated operation CUSD lt m gt lt str gt lt dcs gt When lt str gt is given a mobile initiated USSD string or a response USSD string to a network initiated operation is sent to the network In the case of a successful mobile initiated operation the response USSD string coming from the network is returned before the final result code The test command returns the supported values Defined values lt n gt sets shows the result code presentation status 0 disable 1 enable lt str gt string type USSD string when lt str gt parameter is not given the network is not interrogated if lt dcs gt indicates that the GSM 03 38 default alphabet is used if the TE character set is not HEX refer to the Select TE Character
3. c V0 O CONNECT Data fax call established rate 300 bps or X forbids rate displa Execute CONNECT 1200 Data fax call established rate 1200 bps 5 CONNECT 14400 Data call established rate 14400 bps 18 19 0 gt is 19 CARRIER 16 Call will be established Ok 0 Command aborted Cd The O command returns the Nokia 22 to the online data state from the online command mode The implementation is according to GSM 07 07 section 6 18 6 1 7 GO Automatic answer Command Response lt n gt values Set S0 lt n gt 0 255 default 0 lt n gt 000 255 The S0 command sets the number of rings RING or CRING result codes to wait before answering automatically 0 disables auto answering 6 1 8 S6 Pause before blind dialling S6 lt n gt 12 00 Set The S6 command is ignored The implementation is according to GSM 07 07 section 6 18 6 1 9 857 Connection completion time out Command Response lt n gt values Set S7 lt n gt 10 255 default 60 000 255 The S7 command sets the number of seconds to wait for the completion of call answering or originating procedure before giving up and disconnecting The implementation is according to GSM 07 07 section 6 18 Copyright O Nokia Mobile Phones 2001 All rights reserved 26 NOKIA List of AT Commands for Nokia 22 6 1 10 S8 Comma dial modifier time Set S8 lt n gt 10 255 default 2 lt n gt 000 255 The 58
4. When the presentation of the CLI is enabled and the calling subscriber allows it CLIP number gt lt type gt response is returned after every RING or CRING lt type gt refer to Cellular result codes CRC result code The read command gives the status of lt n gt and triggers an interrogation of the provision status of the CLIP service according GSM 02 81 given in lt m gt The test command returns the values supported by the Nokia 22 as a compound value Copyright Nokia Mobile Phones 2001 All rights reserved 43 NOKIA List of AT Commands for Nokia 22 Defined values lt n gt parameter sets shows the result code presentation status in the Nokia 22 0 disable 1 enable lt m gt parameter shows the subscriber CLIP service status in the network 0 CLIP not provisioned 1 CLIP provisioned 2 unknown e g no network etc lt number gt string type phone number of a format specified by lt type gt lt type gt type of address octet in integer format refer to GSM 04 08 subclause 10 5 4 7 129 unknown telephony 145 international telephony 7 7 CLIR Calling line identification restriction Command Response Default Set CLIR lt n gt 10 Read CLIR CLIR lt n gt lt m gt CLIR 0 2 The CLIR command refers to the CLIR service according to GSM 02 81 that allows a calling subscriber to enable or disable the presentation of the CLI to the called party when originating a call The set
5. 129 unknown telephony 145 international telephony 6 3 2 CMOD Call mode Command Set CMOD lt mode gt _ CMOD CMOD lt mode gt CMOD CMOD 0 3 The CMOD command selects the call mode of the further dialling commands D or for the next answering command A The mode can be either single or alternating When the single mode is selected the call originating and hang up procedures are similar to the procedures specified in the ITU T Recommendations V 25ter T 31 and T 32 In the GSM system voice calls can be followed by alternating voice data and alternating voice fax calls NOTE The CMOD shall be set to zero after a successfully completed alternating mode call It shall be set to zero also after a failed answering The power up factory amp F and user resets Z shall also set the value to zero This reduces the possibility of accidentally originating or answering alternating mode calls NOTE Alternating call answering operations from an external Ul may change the CMOD values Defined values lt mode gt 0 single mode 1 alternating voice fax teleservice 61 2 alternating voice data bearer service 61 3 voice followed by data bearer service 81 6 3 3 CHUP Hang up call Execute CHUP Bern The CHUP is an assured procedure to terminate an alternating mode call Copyright O Nokia Mobile Phones 2001 All rights reserved 30 NOKIA List of AT Commands for Nokia 22 6 3 4 Mute control CMU
6. CSCA CSMP 5 2 1 2 amp Y Select power up configuration Power up uses profile 0 L amp Y1 Power up uses profile 1 The amp Y command defines the profile from which parameters are loaded when the Nokia 22 is activated This setting is not part of the settings that are stored in a profile The amp F command does not affect this setting Copyright Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 5 3 GSM 07 07 5 3 1 CGMI Request ME manufacturer identification Execute CGMI Nokia Mobile Phones __ Test f 0GM 5 3 2 CGMM Request ME model identification Command cme error Execute CGMM 22 RPM 3 GSM900 1800 CGMM 5 3 3 CGMR Request ME revision identification Command Execute C0GMR SWwx Tx Testo CGMR oO 5 3 4 CGSN Request ME serial number identification Execute CGSN IMEI X Test CGSN _ 5 3 5 CSCS Select TE character set Command Response efit Set CSCS lt chset gt 8859 1 Read CSCS CSCS lt chset gt CSC CSCS GSM HEX IRA PCCP437 PCDN 8859 1 The CSCS command informs the Nokia 22 of the character set that is used by the DTE Defined values lt chset gt DTE character set GSM GSM default alphabet GSM 03 38 subclass 6 2 1 this setting easily causes software flow control XON XOFF problems HEX Character strings consist only of hexadecimal numbers from 00 to FF e g 032FE6 equals three 8 bi
7. CSSI result code presentation status 0 disable 1 enable lt m gt sets shows the CSSU result code presentation status 0 disable 1 enable 7 12 CLCC List current calls Command Response cme error CLCC lt id1 gt lt dir gt lt stat gt lt mode gt lt mpty gt D lt CR gt lt LF gt CLCC lt id2 gt lt dir gt lt stat gt lt mode gt lt mpty gt LI SCC d SO The CLCC command returns a list of current calls of the Nokia 22 If the command succeeds but no calls are available no information response is sent Defined values lt idx gt integer type call identification number as described in GSM 02 30 4 5 5 1 This number can be used in the CHLD command operations Copyright O Nokia Mobile Phones 2001 All rights reserved 48 NOKIA List of AT Commands for Nokia 22 lt dir gt 0 mobile originated MO call 1 mobile terminated MT call lt stat gt state of the call active held dialing MO call alerting MO call incoming MT call waiting MT call RON Oo lt mode gt bearer teleservice voice data fax voice followed by data voice mode alternating voice data voice mode alternating voice fax voice mode voice followed by data data mode alternating voice data data mode alternating voice fax fax mode unknown OONDOABRWN O lt mpty gt 0 call is not one of multiparty conference call parties 1 call is one of multiparty conference call parties 7 13 CCUG Cl
8. GSM alphabet into two IRA character long hexadecimal numbers e g character IT GSM 23 is presented as 17 IRA 49 and 55 if lt dcs gt indicates that an 8 bit data coding scheme is used the Nokia 22 converts each 8 bit octet into two IRA character long hexadecimal numbers e g octet with integer value 42 is presented to the TE as two characters 2A IRA 50 and 65 lt dcs gt GSM 03 38 Cell Broadcast Data Coding Scheme in the integer format default 0 14 3 10 CME ERROR Mobile equipment error Format Description CME ERROR lt err gt given instead of ERROR when CMEE 1 or 2 and error is related to the ME or network Po operation E Defined values lt err gt see Error values section 14 4 GSM 07 05 14 4 1 CMTI New SMS DELIVER indication Format Description _ __ o OO CMTI lt mem gt lt index gt when CNMI 0 indications are buffered into the Nokia 22 when CNMI 1 in the on line data state indications are discarded in the command mode they are forwarded directly to the TE when CNMI 2 in the on line data state indications are buffered into the Nokia 22 in the command mode they are forwarded directly to the TE See also the CNMA command Defined values lt mem gt memory to which th received SMs are preferred to be stored SM SIM message storage Copyright Nokia Mobile Phones 2001 All rights reserved 88 NOKIA List of AT Commands for Nokia 22 lt index gt integer type the location
9. Set CSCS command the Nokia 22 converts GSM alphabet into the current TE character set according to the rules of GSM 07 05 Annex A if the TE character set is HEX the Nokia 22 converts each 7 bit character of the GSM alphabet into two IRA character long hexadecimal numbers e g character IT GSM 23 is presented as 17 IRA 49 and 55 if lt dcs gt indicates that a 8 bit data coding scheme is used the Nokia 22 converts each 8 bit octet into two IRA character long hexadecimal numbers e g octet with integer value 42 is presented to the TE as two characters 2A IRA 50 and 65 lt dcs gt GSM 03 38 Cell Broadcast Data Coding Scheme in integer format default 0 Copyright Nokia Mobile Phones 2001 All rights reserved 47 NOKIA List of AT Commands for Nokia 22 lt m gt 0 no further user action required network initiated USSD Notify or no further information needed after mobile initiated operation 1 further user action required network initiated USSD Request or further information needed after mobile initiated operation 7 11 CSSN Supplementary service notifications Command Default Set CSSN lt n gt lt m gt i gt MG CSSN CSSN lt n gt lt m gt pe CSSN CSSN 0 1 0 1 O The CSSN command controls the presentation of the CSSI intermediate result code and the CSSU unsolicited result code The test command returns the supported values Defined values lt n gt sets shows the
10. controls the processing of unsolicited result codes specified within this command lt mt gt sets the result code indication routing for SMS DELIVERs lt bm gt for CBMs and lt ds gt for SMS STATUS REPORTs lt bfr gt defines the handling method for buffered result codes when lt mode gt 1 or 2 is enabled The test command gives the supported setting values Defined values Copyright Nokia Mobile Phones 2001 All rights reserved 64 NOKIA List of AT Commands for Nokia 22 lt mode gt the setting affects only to unsolicited result codes specified within this command 0 lt mt gt Buffer unsolicited result codes in the Nokia 22 If the Nokia 22 result code buffer is full the oldest indications will be discarded and replaced with the new received indications Discard indication and reject new received message unsolicited result codes when the control link is reserved e g in on line data mode Otherwise forward them directly to the TE Buffer unsolicited result codes in the Nokia 22 when the control link is reserved e g in the on line data mode and flush them to the TE after reservation Otherwise forward them directly to the TE NOTE The result code buffer is in the volatile memory messages may get lost if the Nokia 22 is switched off before the codes are sent to TE The rules for storing received SMs depend on its data coding scheme refer to GSM 03 38 preferred memory storage CPMS setting and this value
11. etc Note that quotation marks must be used in this command e g AT CPIN 1234 If the required PIN is SIM PUK or SIM PUK2 lt newpin gt is required lt newpin gt replaces the old pin of the SIM The read command returns an alphanumeric string that indicates whether a password is required Defined values lt pin gt lt newpin gt lt code gt READY SIM PIN SIM PUK PH SIM PIN PH FSIM PIN PH FSIM PUK SIM PIN2 SIM PUK2 PH NET PIN PH NET PUK PH NETSUB PIN PH NETSUB PUK PH SP PIN PH SP PUK PH CORP PIN PH CORP PUK string type values ME is not pending for any password ME is waiting for a SIM PIN ME is waiting for a SIM PUK ME is waiting for a phone to SIM card password ME is waiting for a phone to very first SIM card password ME is waiting for a phone to very first SIM card unblocking password ME is waiting for a SIM PIN2 it is recommended that this lt code gt is returned only if the last executed command resulted in a PIN2 authentication failure i e CME ERROR 17 if the PIN2 is not entered immediately after the failure it is recommended that the ME should not block its operation ME is waiting for a SIM PUK2 it is recommended that this lt code gt should be returned only if the last executed command resulted in a PUK2 authentication failure i e CME ERROR 18 if PUK2 and the new PIN2 are not entered immediately after the failure it is recommended that the ME should not block
12. lt LF gt CMGL lt index gt lt stat gt lt oa da gt lt scts gt lt tooa toda gt lt length gt lt CR gt lt LF gt lt datas text mode CMGF 1 SMS STATUS REPORT CMGL lt index gt lt stat gt lt fo gt lt mr gt lt ra gt lt tora gt lt scts gt lt dt gt lt st gt lt CR gt lt LF gt CMGL lt index gt lt stat gt lt fo gt lt mr gt lt ra gt lt tora gt lt scts gt lt dt gt lt st gt text mode CMGF 1 SMS COMMAND CMGL lt index gt lt stat gt lt fo gt lt ct gt lt CR gt lt LF gt CMGL lt index gt lt stat gt lt fo gt lt ct gt PDU mode CMGF 0 CMGL lt index gt lt stat gt lt length gt lt CR gt lt LF gt lt pdu gt lt CR gt lt LF gt CMGL lt index gt lt stat gt lt length gt lt CR gt lt LF gt lt pdu gt Test CMGL Text mode CMGF 1 CMGL REC UNREAD ALL PDU mode CMGF 0 CMGL 0 4 Text mode The CMGL command returns the messages with the status value lt stat gt from a message storage to the TE If the status of the message is received unread the status in the storage changes to Copyright Nokia Mobile Phones 2001 All rights reserved 66 NOKIA List of AT Commands for Nokia 22 received read NOTE If the selected lt mem1 gt can contain different types of SMs e g SMS DELIVERs SMS SUBMITs SMS STATUS REPORTs and SMS COMMANDS the response may be a mix of the responses of the di
13. or withdraw it at any time without prior notice Copyright O Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 TABLE OF CONTENTS Click on the page number to go to the page Tablet Contents apene eee 3 1 00 ee EE 8 2 Data connettionS iesen a agree 9 3 AT command SNE er 10 REE Register commands RE EEE ER RE EE EE 10 E COMMMAMOS EE 10 31 2 EXxtended command Sneinen ege EE 10 4 TE TA Au Tele ne EE 12 EG EEE OSE ENE EO TE DE EE 12 4 1 1 S3 Command line termination Character cccc ccceeeeeeeeeeeeeeeeeeeeeeeeeeeeecaaeeeeeeeeeeeeeeeaaees 12 4 1 2 54 Response formatting character EEN 12 4 1 3 S5 Command line editing character uuaus grams isegen Eege Eed geed ee 12 e el Een RT 13 4 1 5 Q Result code Suppressionu myudteihumarkuutheiesvl viestad ken Sedan aids Ae 13 4 1 6 V DCE response TO MALER ne 13 4 1 7 X Result code selection and call progress monitoring Control 13 4 1 8 amp C Circuit 109 received line signal detector bebavour 14 4 1 9 amp D Circuit 108 data terminal ready behaviour rxrrrrrrrrnnnnnnnornvrrrnnnnnnnrrrrrnnnnnnnnenrrrnnnnne 14 4 1 10 IPR Fixed DTE r teiu uussune net mit EEN de EE ride here ek GEA ates ed 14 4 1 11 IGF DTE DCE character framing aud dssasoanudrum eldst da 15 4 1 12 IFC DTE DGE local flow Control 15 4 1 13 ILRR DTE DCE local rate reporting usaraaussmussun sukess 16 AMAA 4ES Error ele e E e NEE 16 4 1 15 EB Break handling in error
14. A Answer response Comman Possible verbose Numeri Description d result codes V1 c VO A CONNECT Data fax call established rate 300 bps or X forbids rate Execute displa CONNECT 1200 Data fax call established rate 1200 bps 5 CONNECT 9600 CONNECT 14400 Data call established rate 14400 bps CONNECT 19200 CONNECT 28800 CONNECT 38400 CONNECT 48000 22 3 CONNECT 56000 Data call established rate 56000 bps ERROR CARRIER 6 NO CARRIER 3 Call could not be established _ __ _ OK 0 Commandaborted SSS O A command instructs the Nokia 22 to immediately connect to the line and to start the phone call Any additional commands that appear after A on the same command line are ignored All the result codes are not in V 25ter Before one of the above codes can be returned some of the following may precede CR or CARRIER DR or ILRR in that order The answer command is also used to control alternating mode calls see GSM 07 07 section 6 6 6 1 5 H Hook control hang up all calls except possible waiting call if only single mode calls are in progress or switch to voice mode if alternate mode call is active The implementation is according to GSM 07 07 section 6 18 Copyright Nokia Mobile Phones 2001 All rights reserved 25 NOKIA List of AT Commands for Nokia 22 6 1 6 O Return to online data state Command Possible verbose Numeri Description result codes V1
15. Message Identifier in integer format lt dcs gt GSM 03 38 Cell Broadcast Data Coding Scheme in integer format lt page gt GSM 03 41 CBM Page Parameter bits 4 7 in integer format lt pages gt GSM 03 41 CBM Page Parameter bits 0 3 in integer format lt data gt GSM 03 41 CBM Content of Message in text mode responses format if lt dcs gt indicates that GSM 03 38 default alphabet is used if the TE character set is other than HEX refer command CSCS in GSM 07 07 the Nokia 22 converts the GSM alphabet into the current TE character set according to the rules of Annex A if the TE character set is HEX the Nokia 22 converts each 7 bit character of the GSM alphabet into two IRA character long hexadecimal numbers if lt dcs gt indicates that an 8 bit or a UCS2 data coding scheme is used the Nokia 22 converts each 8 bit octet into two IRA character long hexadecimal numbers lt length gt the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length lt pdu gt GSM 03 41 TPDU in hexadecimal format Copyright Nokia Mobile Phones 2001 All rights reserved 90 NOKIA List of AT Commands for Nokia 22 14 4 4 CDSI New SMS STATUS REPORT indication Format Description o oo O CDSI lt mem gt lt index gt when CNMI 0 indications are buffered into the Nokia 22 when CNMI 1 in the on line data state indications are discarded in command mode they are forwarded di
16. Report manufacturer identification FMM Request model identification FMR Request revision identification FTS Transmit silence FRS Receive silence FTM Facsimile transmit FRM Facsimile receive FTH HDLC transmit FRH HDLC receive FLO Flow control select FPR Serial port rate control FDD Double Escape Character Replacement 13 2 TIA 592 FCLASS Select read or test Service Class FMI Report manufacturer identification FMM Request model identification FMR Request revision identification D Originate command A Answer command FDT Data transmission FDR Data reception FKS Session termination FIP Initialise facsimile parameters FCC DCE capabilities parameters FIS Current session parameters FCS Current session results FLI Local ID strings FPI Local polling ID strings FNS Non standard frame FIF octet string FLP Indicate document to poll FSP Request to poll Copyright O Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 FCR FBU FNR FIE FPS FCQ FRQ FAA FCT FHS FRY FMS FLO FPR FPP FBO FEA FFC FBS Capability to receive HDLC frame reporting Negotiation message reporting Procedure interrupt enable Page status Copy quality checking Receive quality thresholds Adaptive answer DTE phase C response timeout Call termination status ECM retry count Minimum phase C speed Flow control select Serial port rate control Packet protoc
17. SC AO Ol OX Al IR AB AG AC FD The CLCK command enables and disables or queries the state of SIM ME security features PIN or security code query or fixed dialling feature or call barring supplementary services The lt fac gt values AB AG and AC are only applicable for lt mode gt 0 Only security code levels phone and none can be handled with this command If the memory level is set and the status is queried CLCK PS 2 the AT interface shall indicate not active CLCK 0 When the SS status request response coming from the network indicates that the SS is active for a specific data bearer services e g circuit async the AT interface shall only indicate data lt class gt 2 not active case is displayed only when the SS is not active to any service i e CLCK 0 7 The test command returns facility values supported by the Nokia 22 as a compound value Defined values lt fac gt PS PH SIM lock Phone to SIM card The ME asks for a password when an other SIM card than the current SIM card is inserted the ME may remember certain amount of previously used cards and therefore it does not necessarily ask for a password when a previously used cards is inserted Copyright Nokia Mobile Phones 2001 All rights reserved NOKIA SC AO Ol Ox Al IR a sae its Se lt mode gt 0 1 2 lt status gt 0 1 lt passwd
18. command overrides the CLIR subscription when the temporary mode is provisioned as a default adjustment for all the following outgoing calls This adjustment can be revoked by using the opposite command If this command is used by a subscriber without a provision of CLIR in the permanent mode the network will act according GSM 02 81 The read command gives the default adjustment for all the outgoing calls given in lt n gt and triggers an interrogation of the provision status of the CLIR service given in lt m gt The test command returns the supported values Defined values lt n gt sets the adjustment for outgoing calls 0 the presentation indicator is used according to the subscription of the CLIR service Copyright Nokia Mobile Phones 2001 All rights reserved 44 NOKIA List of AT Commands for Nokia 22 1 CLIR invocation 2 CLIR suppression lt m gt shows the subscriber CLIR service status in the network 0 1 2 3 4 78 COLP Connected line identification presentation Command Response Default Set_ ColP lt n gt _ Jo Weg CLIR not provisioned CLIR provisioned in permanent mode unknown e g no network etc CLIR temporary mode presentation restricted CLIR temporary mode presentation allowed COLP COLP lt n gt lt m gt COLP COLP 0 1 EE The COLP command refers to the GSM supplementary service COLP Connected Line Identification Presentation that enables a calling subscriber to
19. command specifies the time in seconds that the DCE shall pause during the signalling of call addressing information to the network dialling when a comma dial modifier is encountered in a dial string of the D command The implementation is according to GSM 07 07 section 6 18 6 1 11 S10 Automatic disconnect delay Set Si0 lt n gt 0 255 default 100 lt n gt 000 255 The S10 command sets the time in tenths of a second that the Nokia 22 will remain connected to the line off hook after it has indicated the absence of the received line signal If the received line signal is detected before the time specified in the S10 expires the Nokia 22 remains connected to the line and the call continues The implementation is according to GSM 07 07 section 6 18 6 1 12 L Monitor speaker loudness Oo The L command is ignored The implementation is according to GSM 07 07 section 6 18 6 1 13 M Monitor speaker mode The M command is ignored The implementation is according to GSM 07 07 section 6 18 6 1 14 DS Data compression Command JResponse Default O DS lt dir gt lt neg gt lt P1 gt lt P2 gt 00204820 Set DS lt dir gt lt neg gt lt P1 gt lt P2 gt py ER DS 0 3 0 1 512 2048 6 32 The DS command controls the V 42 bis data compression function NOTE The V 42 bis data compression must be supported by the network Copyright Nokia Mobile Phones 2001 All rights reserved 27 NOKIA Li
20. control Aug 1995 GSM 07 07 Digital cellular telecommunications system Phase 2 AT command set for GSM Mobile Equipment ME version 5 4 0 Nov 1997 GSM 07 05 Digital cellular telecommunications system Phase 2 Use of Data Terminal Equipment Data Circuit terminating Equipment DTE DCE interface for Short Message Service SMS and Cell Broadcast Service CBS version 5 4 0 Nov 1997 TIA 578 A Facsimile Digital Interfaces Asynchronous Facsimile DCE Control Standard Service Class 1 May 1995 TIA 592 Facsimile Digital Interfaces Asynchronous Facsimile DCE Control Standard Service Class 2 May 1995 TIA SP 2388 Proposed new standard Asynchronous Facsimile DCE Control Standard Aug 1990 TIA PN 3131 Project to complete IS 101 Facsimile Digital Interfaces Voice Control Interim Standard for Asynchronous DCE Feb 1995 ITU T Recommendation G 711 Pulse code modulation PCM of voice frequencies 1993 GSM 03 40 Digital cellular telecommunications system Phase 2 Technical realization of the Short Message Service SMS Point to Point PP GSM 03 38 Digital cellular telecommunications system Phase 2 alphabets and language specific information GSM 03 41 Digital cellular telecommunications system Phase 2 Technical realization of the Short Message Service Cell Broadcast SMSCB ETS 300 342 1 Radio Equipment and Systems RES ElectroMagnetic Compatibility EMC for European digital cellular telecommunicati
21. control operaion 16 4 1 16 EFCS 32 bit frame check seouence AANEREN 16 4 1 17 ER Error control EPER ae 17 4 1 18 ETBM Call termination buffer manage rnnrrrrnnnnnnnnnnnnnnrrrnnnnnnnnnnrnnnrrrrnnnnnnnrrrnnnnrrnnnnne 17 42 0 E EE 17 4 2 1 S25 Detect DTR change EE 17 4 2 2 amp S DSR signal behaviour E 17 4 2 3 amp K Select flow eppes iced es veckn cs cabiveleede cudsta eed Gbeadias intext Eed 17 E ane ie EE 18 Bi N S eee Ge 18 5 1 1 Z Reset EE Ce EE 18 5 1 2 amp F Set to factory cefined configuration cca ceevceavs cecnceescdtncenstechscdieddlevestie me veeeedbeecneeeed ees 18 5 1 3 Request identification information ANNE 18 5 1 4 GMI Request TA manufacturer identification rrrrnnnnnonnrrrrnnnnnnnornnnnnrrennnnrnrnnnrrrrnnnennn 18 5 1 5 GMM Request TA model denttcaton 18 5 1 6 GMR Request TA revision identification ENNEN 19 5 1 7 GSN Request TA serial number entiftcaton 19 5 1 8 GCAP Request complete capabilities list errnnnnrnnrnnnnnnannrrnrrnnnnnnnnnnnrrnnnnnrnnnnnnrrnnnnnnr 19 52 DG TACO EE 19 5 2 1 amp V View COME ION EN ak Acted tees ane 19 5 2 1 1 amp W Store Te e Hs 19 5 2 1 2 AY Select power up Copnfiguration EEN 19 53 GSM EE 20 5 3 1 CGMI Request ME manufacturer identification ernrnnnnnnrrrrrnnnnnnnnrrnnnrnnnnnnnrrrnnnnrrrnnnn 20 Copyright O Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 5 3 2 CGMM Request ME model identificatio
22. current HSCSD configuration is written to the terminal window every time the HSCSD configuration has changed or a new HSCSD call has been initiated To disable the feature key in at chsr 0 6 3 12 CSNS Single numbering scheme Set CSNS lt mode Read CSNS CSNS lt mode gt CSNS CSNS 0 7 The CSNS command selects the bearer or teleservice to be used when a mobile terminated single numbering scheme call is established i e when a call without bearer capability element is received The parameter values set with the CBST command shall be used when lt mode gt equals a data service If the CBST parameter is set to a value that is not applicable to single numbering calls the parameter shall be mapped to the closest valid value Defined values lt mode gt 0 voice 1 alternating voice fax voice first TS 61 2 fax TS 62 3 alternating voice data voice first BS 61 4 data 5 alternating voice fax fax first TS 61 6 alternating voice data data first BS 61 7 voice followed by data BS 81 Copyright Nokia Mobile Phones 2001 All rights reserved 35 NOKIA List of AT Commands for Nokia 22 6 3 13 CHSD HSCSD device parameters execute CHSD CHSD lt mclass gt lt maxRx gt lt maxTx gt lt sum gt lt codings gt est preso 1 Parameters lt mclass gt integer type multislot class lt maxRx gt integer type the maximum number of receive timeslots that the ME can use lt
23. from the SIM card using AT commands e g the CMGR command The CNMI command e g AT CNMI 1 2 2 1 0 lt CR gt allows the application to receive the incoming SMSs directly in all environments The following ETSI specifications can be used as a reference when the GSM 07 05 Text and PDU modes are used GSM 07 05 GSM 03 03 GSM 03 38 GSM 03 40 GSM 03 41 GSM 04 11 Q What standards does the Nokia 22 support A There are several standards that have influenced the design of the Nokia 22 From the application s point of view the most important standards are those that specify the AT command interface ITU T V 25ter ETS GSM 07 07 ETS GSM 07 05 TIA 578 A TIA 592 and TIA SP 2388 Copyright Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 These standards can be obtained from national standards organizations or at www etsi fr www tiaonline org and www Hu ch Copyright O Nokia Mobile Phones 2001 All rights reserved 99
24. gt lt classx gt 41 List of AT Commands for Nokia 22 SIM lock SIM card SIM asks for a password in an ME power up and when this lock command is issued BAOC Barr All Outgoing Calls refer ti GSM02 88 clause 1 BOIC Barr Outgoing International Calls refer to GSM 02 88 clause 1 BOIC exHC Barr Outgoing International Calls except for Home Country refer to GSM 02 88 clause 1 BAIC Barr All Incoming Calls refer to GSM 02 88 clause 2 BIC Roam Barr Incoming Calls when Roaming outside the home country refer to GSM 02 88 clause 2 All Barring services refer to GSM 02 30 applicable only for lt mode gt 0 All outgoing barring services refer to GSM 02 30 applicable only for lt mode gt 0 All incoming barring services refer to GSM 02 30 applicable only for lt mode gt 0 SIM fixed dialling memory feature if the PIN2 authentication is not done during the current session the PIN2 is required as lt passwd gt unlock lock query status not active active string type shall be the same as the password specified for the facility from the Nokia 22 user interface or with the Change Password CPWD command is a sum of integers each representing a class of information the default value 7 equals all classes voice telephony data usually refers to all bearer services with lt mode gt 2 this may only refer to some bearer service fax facsimile services Copyright Nokia Mobi
25. kinds of GSM 03 40 MO TPDUs can be sent with this command operation equals CMGS Defined values lt fo gt first octet of GSM 03 40 SMS COMMAND in integer format lt ct gt GSM 03 40 TP Command Type in integer format lt pid gt GSM 03 40 TP Protocol Identifier in integer format lt mn gt GSM 03 40 TP Message Number in integer format lt da gt GSM 03 40 TP Destination Address Address Value field in string format the type of address is given by lt tooda gt lt toda gt lt toda gt GSM 04 11 TP Destination Address Type of Address octet in integer format 129 unknown telephony 145 internal telephony lt mr gt GSM 03 40 TP Message Reference in integer format lt scts gt GSM 03 40 TP Service Centre Time Stamp in time string format lt length gt in the PDU mode CMGF 0 the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length lt ackpdu gt GSM 03 40 RP User Data element of RP ACK PDU Copyright Nokia Mobile Phones 2001 All rights reserved 76 NOKIA List of AT Commands for Nokia 22 11 VOICE COMMANDS 11 1 VTS DTMF generation Command Response Execute VTs lt dm lt dm SS Test vis2 1000 The VTS command sends Dual Tone Multiple Frequency DTMF voices during a call The dialling command can also be used to send DTMFs see the D command Defined values lt dtmf gt DTMF digit 0 9 Copyright O Nokia Mobile Phones 2001 All ri
26. maxTx gt integer type the maximum number of transmit timeslots that the ME can use lt sum gt integer type the total number of receive and transmit timeslots that the ME can use at the same time per TDMA frame The following applies in a HSCSD call 1 receive slots transmit slots lt sum gt lt codings gt asum of integers each representing a supported channel coding 4 9 6k full rate data traffic channel 8 14 4k full rate data traffic channel 12 both 9 6k and 14 4k supported 6 3 14 CHSN Parameter command syntax Command Response cme error CHSN lt wAiur gt lt CHSN lt wAiur gt lt wRx gt lt topRx gt lt codings gt x wRx gt lt topRx gt lt codings gt est xs CHS O GL GOL GS HEEN Description The set command controls parameters for non transparent HSCSD calls Changing lt topRx gt or lt codings gt value during a call does not affect the current call Changing lt wAiur gt or lt wRx gt affects the current call only if lt topRx gt was non zero when a call was established Defined values lt wAiur gt integer type wanted air interface user rate The default value 0 indicates that the TA shall calculate a proper value from the currently selected fixed network user rate lt speed gt subparameter from CBST command lt codings gt and lt wRx gt or lt maxRx gt from CHSD command if lt wRx gt 0 Other values 9600 bps 14400 bps 19200 bps 28800 bps 4320
27. of the message in the defined memory 14 4 2 CMT New SMS DELIVER Format Description 3 text mode when CNMI 0 routed messages are buffered into the Nokia 22 if the CMT lt oa gt lt scts gt buffer is full memory capacity exceeded is sent to the network lt tooa gt lt fo gt lt pid gt lt dcs gt lt sca gt when CNMI 1 in the on line data state the routed messages are lt tosca gt lt length gt lt CR gt lt LF gt lt data gt rejected e g memory capacity exceeded is sent to the network and PDU mode when the command mode is entered memory available is sent to the CMT lt length gt network in the command mode they are forwarded directly to the TE lt CR gt lt LF gt lt pdu gt when CNMI 2 in the on line data state routed messages are buffered into the Nokia 22 if the buffer is full memory capacity exceeded is sent to the network and when the command mode is entered memory available is be sent to the network in the command mode they are forwarded directly to the TE See also CNMA command Defined values lt 0a gt GSM 03 40 TP Originating Address Address Value field in string format the type of address is given by lt tooa gt lt scts gt GSM 03 40 TP Service Centre Time Stamp in time string format lt tooa gt GSM 04 11 TP Originating Address Type of Address octet in integer format 129 unknown telephony 145 internal telephony lt fo gt first octet of GSM 03 40
28. page gt lt pages gt lt CR gt lt LF gt lt data gt textmode enabled 3 Class 3 CBMs are routed directly to the TE using unsolicited result codes defined in lt bm gt 2 If the CBM storage is supported the messages of other classes result in an indication as defined in lt bm gt 1 Copyright Nokia Mobile Phones 2001 All rights reserved 65 NOKIA List of AT Commands for Nokia 22 lt ds gt 0 No SMS STATUS REPORTs are routed to the TE 1 SMS STATUS REPORTs are routed to the TE using an unsolicited result code CDS lt length gt lt CR gt lt LF gt lt pdu gt PDU mode enabled or CDS lt fo gt lt mr gt lt ra gt lt tora gt lt scts gt lt dt gt lt st gt text mode enabled 2 If SMS STATUS REPORT is stored into the Nokia 22 an indication of the memory location is routed to the TE using an unsolicited result code CDSI lt mem gt lt index gt lt bfr gt 0 the Nokia 22 buffer of unsolicited result codes defined within this command is flushed to the TE when lt mode gt 1 2 is entered the OK response shall be given before flushing the codes 1 the Nokia 22 buffer of unsolicited result codes defined within this command is cleared when lt mode gt 1 2 is entered 10 11 CMGL List messages CMGL Text mode CMGF 1 SMS DELIVER or SMS SUBMIT lt stat gt CMGL lt index gt lt stat gt lt oa da gt lt scts gt lt tooa toda gt lt length gt lt CR gt lt LF gt lt data gt lt CR gt
29. returned Values can be used to identify a message upon an unsolicited delivery status report result code The text PDU entering is as specified in 07 05 If the SMSC address is not set restored during the current session i e CSCA returns CSCA 129 it must automatically be read from the SIM ME location 1 In the PDU mode all kinds of GSM 03 40 MO TPDUs can be sent with this command operation equals CMGC Defined values lt da gt GSM 03 40 TP Destination Address Address Value field in string format the type of address is given by lt toda gt lt toda gt GSM 04 11 TP Destination Address Type of Address octet in integer format 129 unknown telephony 145 internal telephony lt mr gt GSM 03 40 TP Message Reference in integer format lt scts gt GSM 03 40 TP Service Centre Time Stamp in time string format lt length gt the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length Copyright Nokia Mobile Phones 2001 All rights reserved 71 NOKIA List of AT Commands for Nokia 22 lt ackpdu gt GSM 03 40 RP User Data element of RP ACK PDU 10 15 CMSS Send message from storage Command Response cms error Execute CMSS lt index gt text mode CMGF 1 and sending ok 129 145 lt da gt lt toda gt CMSS SN Ge PDU mode CMGF 0 and sending ok CMSS lt mr gt lt ackpdu gt CMSS Text mode The CMSS command sends a message
30. rights reserved 68 NOKIA List of AT Commands for Nokia 22 lt oa gt lt da gt GSM 03 40 TP Originating Destination Address Address Value field in string format the type of address is given by lt tooda gt lt toda gt lt scts gt GSM 03 40 TP Service Centre Time Stamp in time string format lt tooa gt lt toda gt lt tora gt GSM 04 11 TP Originating Destination Address Type of Address octet in integer format 129 unknown telephony 145 internal telephony lt fo gt first octet of GSM 03 40 SMS DELIVER SMS SUBMIT SMS STATUS REPORT or SMS COMMAND in integer format lt pid gt GSM 03 40 TP Protocol Identifier in integer format lt dcs gt GSM 03 38 SMS Data Coding Scheme in integer format lt sca gt GSM 04 11 RP SC address Address Value field in string format type of address given by lt tosca gt lt tosca gt GSM 04 11 RP SC address Type of Address octet in integer format 129 unknown telephony 145 internal telephony lt length gt integer type value that indicates the length of the message body lt data gt in characters in the text mode CMGF 1 or that indicates the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length in the PDU mode CMGF 0 lt data gt SMS GSM 03 40 TP User Data in text mode responses lt vp gt GSM 03 40 TP Validity Period either in integer format or in time string format refer lt dt gt lt mr gt GSM 03 40 TP Messag
31. 0 bps ORWND ch lt wRx gt integer type wanted amount of receive timeslots The default value 0 indicates that the TA shall calculate a proper value from the currently selected lt wAiur gt and lt codings gt Copyright Nokia Mobile Phones 2001 All rights reserved 36 NOKIA List of AT Commands for Nokia 22 lt topRx gt integer type top value for lt wRx gt that the user is going to request during the next established non transparent HSCSD call The default value 0 indicates that the user is not going to change lt wAiur gt lt wRx gt during the next call lt codings gt a sum of integers each representing a channel coding that is accepted for non transparent HSCSD calls The default value 0 indicates that all the supported codings are accepted refer CHSD command for other values lt codings gt is a sum of integers each representing a supported channel coding 4 9 6k full rate data traffic channel 8 14 4k full rate data traffic channel 12 Both 9 6k and 14 4k supported lt maxAiur gt integer type the maximum value for lt wAiur gt assuming that all supported channel codings are accepted and the maximum number of timeslots is used lt modify gt 0 lt wAiur gt lt wRx gt modification during call is not supported lt topRx gt accepts only 0 1 lt wAiur gt lt wRx gt modification during call is supported by ME TA NOTE The non transparent transparent data service shall be selected by the at cbst comman
32. 38400 bps DELAYED Call to the number is temporarily forbidden 3 ERROR Command cannot be actioned NO ANSWER 8 Called party does not answer NO CARRIER Call could not be established OK Command aborted or voice call started with semicolon character The original description of the D command is specified in the V 25ter standard but the implementation is according to the modifications specified in GSM 07 07 Before one of the above codes can be returned some of the following may precede CSSI COLP CR or CARRIER DR or ILRR in that order The dial command is also used to control alternating mode calls see GSM 07 07 section 6 6 and annexes E and F NOTE The VTS command or comma modifier i e ATD 1234 in this case the first comma does not cause a pause can be used to send DTMF digits CONNECT 19200 Data call established rate 19200 bps He Copyright O Nokia Mobile Phones 2001 All rights reserved 23 NOKIA List of AT Commands for Nokia 22 lt dial string gt characters V 25ter dialling digits 0123456789 Accepted as valid digits and can only be in the beginning cause ERROR V 25ter modifiers in case of a voice call originate call to the number preceding a comma wait for a remote answer pause for a length specified with the S8 register and send numbers after comma as DTMF digits further commas cause a pause specified with S8 register all commas are ignored in case of data call TP I
33. 4 3 1 CSSI Intermediate supplementary service notification rrrnrrrrrrnnnnnnnnnrrrnnnnrnnnnnnnnn 82 14 3 2 COLP Connected line identification report 82 14 3 3 CR Data service tenon te antec eatin ia SR wantin Bata du eon eae 83 14 3 4 CRING Distinctive ring vegen bades teak EE geed 83 14 3 5 CLIP Calling line identification report 83 14 3 6 CSSU Unsolicited supplementary service notification rrrrnnrrnnnnnnrnnnrrnnnnnnnrnnrrnnnnn 84 14 37 ACCWA Call Wait DEE 84 14 3 8 CREG Network registrations s cii cc cticasitaticcheeesksenedentscpeee tedersdactididaraeensbenecnteeedeliaes 86 14 3 9 CUSD Network initiated unstructured supplementary service data 86 14 3 10 CME ERROR Mobile equipment error ecccceeceeeee eee eeeeeeeeeeeeeeeeeeeeeeeaaeeeeeeeeeeeneea 87 144 GEM 07 05 E 87 14 4 1 CMTI New SMS DELIVER indication A 87 14 4 2 CMT NeW SMS DELIVER EE 88 1443 CGBM New GBM i serende feed mi eines dangul wah skadene ek net lea 89 14 4 4 CDSI New SMS STATUS REPORT indication errxrrrrnnnvrrrrnnnnnnnnrrnnnvrrrnnnnrnrrrrrnnnnnn 90 14 4 5 CDS New SMS STATUS REPORT AAA 90 14 4 6 CMS ERROR Message service failure seesssssnnnneeeesseeertrrrrrrssrrrrrrnnnrssrrrrrrrnneesnet 91 15 ee 92 151 OME ERROR Values varene re adel A E Ee 92 15 2 6MS ERROR Values eege ENEE Ee SEENEN 93 16 R 95 17 Example procedures on some atcommandes ANNE 96 174 inputting PIN GODE aain korets EH 96 17 2 Jnt leng the NOK E
34. 61 39 255 1 255 Ge The CRLP command sets the used radio link protocol RLP parameters when non transparent data calls are originated The read command returns the current settings The test command returns the values supported by the Nokia 22 as a compound value Defined values lt ver gt RLP version number in integer format when version indication is not present it shall equal 0 lt iws gt Inter Working Function IWF to MS window size lt mws gt MS to IWF window size lt T1 gt acknowledgement timer in units of 10 ms lt N2 gt retransmission attempts lt T4 gt re sequencing period in units of 10 ms 6 3 8 CR Service reporting control Command Response Default Set CR lt mode 10 Read CR CR lt mode gt CR 0 1 The CR command controls the returning of the intermediate result code CR lt serv gt If enabled the intermediate result code is transmitted during connect negotiation when the Nokia 22 has determined the speed and quality of service that will be used and before any error control or data compression reports are transmitted or any final result code e g CONNECT is transmitted Defined values lt mode gt 0 disables reporting 1 enables reporting lt Serv gt REL ASYNC asynchronous non transparent Copyright Nokia Mobile Phones 2001 All rights reserved 33 NOKIA List of AT Commands for Nokia 22 6 3 9 CEER Extended error report Co
35. E 28 6 3 1 CSTA Select type Of address ua 28 092 FOMOD Call OAS EE 29 6 3 3 GHUP Hang up Call cscs sce assessor denne NEE ENKER deeg teats 29 6 3 4 Mute Control 0MUT rectoren oi i AEREE E E EENEG 30 6 3 5 Loudspeaker volume level CLVL ENNEN 30 6 3 6 CBST Select bearer service fwpe ENEE 30 6 3 7 CRLP R de l k prototo EE 32 6 3 8 CR Service reporting te regn pt amanssrudsunert 32 6 3 9 CEER Extended error Teen EENS Geer dead ne 33 6 3 10 CRC CGellularresuhtcodes seENERdRENESRERNKSEREESEEEEEEEESENEEEERNEEENEENEEEEEEEEEENR EEN 33 6 3 11 CHSR Current call parameters reportmg 34 6 3 12 CSNS Single numbering scheme un 34 6 3 13 CHSD HSCSD device parameters ENNEN 35 6 3 14 CHSN Parameter command Syntax Au 35 6 3 15 CHSC Current call poarameters ke 36 6 3 16 CVHU Voice Hang Up Control 37 7 Network service commands GSM O 07 38 71 GNUM Subscriber number a a aati 38 7 2 CREG Network registration EE 38 7 3 COPS Operator SelocthOmec ere ue E deegrheeh Eeer eege 39 74 CL CK Facility IOCK EE 40 Copyright Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 7 5 CPWD Change password ENNEN 42 7 6 CLIP Calling line identification presentation xsarrnnnnrrnnnnrnnnnrrnnnnnnnrnvrrrnnnnrnnnnrrrrnnrrrrnnnnnn 42 7 7 CLIR Calling line identification restriction Au 43 7 8 COLP Connected line identification presentation wrrrnnnvrrrrnnnnrrnnnnrrrrnnnrnrnnnrrrrnnnerrr
36. E 96 17 3 Sending an SMS from a terminal or other similar application ererrnnnnnrrrrnnnnnnnnnnrnnnnnnnrenr 97 17 4 Sending a sample SMS in the text mode 97 17 5 HSCSD command examples 25 bus orka Sene Gen 98 Copyright O Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 Abbreviations AT BCD CBM CIS CLI COL COR CR CTS DCD DCE TE TIA UART USRT USSD Attention Binary Coded Decimal Cell Broadcast Message PCMCIA Card Information Structure Calling Line Identity Connected Line identity Configuration Option Register Carriage Return Clear To Send Data Carrier Detect Data Circuit terminating Equipment see TA Data Terminal Equipment see TE Dual Tone Multiple Frequency Data Terminal Ready Data Set Ready Electro Magnetic Compatibility Echo Return Loss Electro Static Discharge Groupe Special Mobile Global System for Mobile communications High Speed Circuit Switched Data International Mobile station Equipment Identity International Reference Alphabet Integrated Services Digital Network International Telecommunication Union Interworking Function Mobile Equipment e g a GSM phone Mobile Originated Mobile Terminated Mobile Station Mobile Station ISDN Number Personal Computer Pulse Code Modulation Protocol Data Unit Personal Identity Number Personal Unblocking Key Ring Indicator Radio Link Protocol Request To Send Subscriber Identity Module Short Message Short Messag
37. ESG gt CMGW t Text mode The CMGW command stores a message either SMS DELIVER or SMS SUBMIT to the memory storage lt mem2 gt memory location lt index gt of the stored message is returned By default the message status will be set to stored unsent but the parameter lt stat gt also allows other status values to be given The entering of text is done similarly as specified in the command Send Message CMGS NOTE SMS COMMANDs and SMS STATUS REPORTs can not be stored in the text mode PDU mode The CMGW command stores a message to the memory storage lt mem2 gt A memory location lt index gt of the stored message is returned By default the message status will be set to stored unsent but the lt stat gt parameter also allows other status values to be given Text PDU entering is as specified in ETSI GSM 07 05 3 If the SMSC address is not set restored during the current session i e CSCA returns CSCA 129 and the stored message is SMS SUBMIT or SMS COMMAND the SMSC address must automatically be read from the SIM ME location 1 Defined values lt oa gt lt da gt GSM 03 40 TP Originating Destination Address Address Value field in string format the type of address is given by lt tooda gt lt toda gt lt scts gt GSM 03 40 TP Service Centre Time Stamp in time string format lt tooa gt lt toda gt lt tora gt GSM 04 11 TP Originating Destination Address Type of Address octet in integer
38. Electronic user s guide released subject to Nokia User s Guides Terms and Conditions 7th June 1998 NOKIA List of AT Commands for Nokia 22 Nokia 22 List of AT Commands NOKIA CONNECTING PEOPLE 9356900 issue 1 Copyright O Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 Copyright Nokia Mobile Phones 2001 All rights reserved Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice Under no circumstances shall Nokia be responsible for any loss of data or income or any special incidental consequential or indirect damages howsoever caused The contents of this document are provided as is Except as required by applicable law no warranties of any kind either express or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose are made in relation to the accuracy reliability or contents of this document Nokia reserves the right to revise this document
39. I check that status reports are routed to TE CNMI 2 1 0 1 0 OK AT CSMP 32 167 0 0 status report wanted otherwise default settings OK AT CMGS 358501234567 gt This the first line gt This is the last Line 8 start editing a message edit first line and press carriage return edit second line and send message by pressing control Z CMGS 10 success message reference 10 returned from SMSC OK 00 2 10 358501234567 145 95 077 04 13 12 144 04 95 07 04 13 12 20 04 0 status report of successful message delivery received Storing an unsent message in the memory sending it from there and deleting it AT CPMS check memory settings CPMS ME 4 10 ME 4 10 ME 4 10 OK AT CMGW 9501231234 write message gt This is the message body Z CMGW 7 index number in storage returned OK AT CMSS 7 send from storage CMSS 12 success reference value 12 sent from SC OK AT CMGD 7 delete message Copyright Nokia Mobile Phones 2001 All rights reserved 73 NOKIA List of AT Commands for Nokia 22 OK 10 17 CMGW Write message to memory Command Response Default cms error Text mode CMGF 1 storing successful text mode CMGW lt oa da gt lt tooa toda gt lt stat gt CMGW lt index gt 129 145 lt CR gt text is entered lt ctrl Z ESC gt STO UNSENT PDU mode CMGF 0 PDU mode CMGW lt length gt lt stat gt lt CR gt 2 PDU is given lt ctrl Z
40. Nokia Mobile Phones 2001 All rights reserved NOKIA Description 85 List of AT Commands for Nokia 22 This command allows the controlling of the Call Waiting supplementary service Activation deactivation and status query are supported When querying the status of a network service lt mode gt 2 the response line for not active case lt status gt 0 should be returned only if the service is not active for any lt class gt The parameter lt n gt is used to disable enable the presentation of an unsolicited result code CCWA lt number gt lt type gt lt class gt lt alpha gt to the TE when a call waiting service is enabled The command should be abortable when the network is interrogated The interaction of this command with other commands based on other GSM supplementary services is described in the GSM standard The test command returns the values supported by the TA as a compound value lt n gt lt mode gt 0 1 2 lt classx gt NI 4 lt status gt 0 1 lt number gt lt type gt lt alpha gt Defined values disable 1 enable sets shows the result code presentation status in the TA H when the lt mode gt parameter is not given the network is not interrogated disable enable query status is a Sum of integers each representing a class of information default 7 equals all classes voice telephony data usually refer to all bearer services with lt mod
41. O Nokia Mobile Phones 2001 All rights reserved 94 NOKIA List of AT Commands for Nokia 22 phone security code required to execute the AT command ME does not have a SIM connected to it SIM PIN required to execute the AT command SIM PUK required to execute the AT command SMS interface is reserved by some other application general memory error e g problems in the SIM database communication message to be sent to the network does not contain the SMSC address and the SMSC address cannot be found from the Nokia 22 memory location does not exist RP layer cause value from the network TP layer cause value from the network PDU mode is enabled the length of the given PDU is not equivalent with the given lt length gt or the ME TA detects that the PDU is of invalid format text mode is enabled too long a message is attempted to be sent stored or the CSMP does not contain a valid SMS SUBMIT in the case of CMGS or the ME TAdetects that the PDU is of invalid format SMS memory is full lt index gt given in the CMSS does not contain SMS SUBMIT or SMS COMMAND or lt index gt given in the CMSS contains SMS COMMAND and the lt da gt is given no network service Copyright Nokia Mobile Phones 2001 All rights reserved 95 NOKIA List of AT Commands for Nokia 22 16 1 2 3 4 5 6 7 9 10 11 12 13 REFERENCES ITU T Recommendation V 25ter Serial asynchronous automatic dialling and
42. SMS DELIVER SMS SUBMIT SMS STATUS REPORT or SMS COMMAND in integer format lt pid gt GSM 03 40 TP Protocol Identifier in integer format lt dcs gt GSM 03 38 SMS Data Coding Scheme in integer format lt sca gt GSM 04 11 RP SC address Address Value field in string format type of address given by lt tosca gt lt tosca gt GSM 04 11 RP SC address Type of Address octet in integer format 129 unknown telephony 145 internal telephony lt length gt integer type value that indicates the length of the message body lt data gt in characters in the text mode CMGF 1 or that indicates the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length in the PDU mode CMGF 0 Copyright Nokia Mobile Phones 2001 All rights reserved 89 NOKIA List of AT Commands for Nokia 22 lt data gt SMS GSM 03 40 TP User Data in the text mode responses lt pdu gt GSM 04 11 SC address followed by GSM 03 40 TPDU in the hexadecimal format 14 4 3 CBM New CBM Format Description S text mode when CNMI 0 messages are discarded CBM lt sn gt lt mid gt lt dcs gt lt page gt lt pages gt lt CR gt lt LF gt lt data gt when CNMI 1 2 messages are PDU mode forwarded directly to the TE CBMs CBM lt length gt lt CR gt lt LF gt lt pdu gt cannot be received during a call Defined values lt sn gt GSM 03 41 CBM Serial Number in integer format lt mid gt GSM 03 41 CBM
43. T Set CMUT lt n gt CME ERROR lt err gt Read CMUT CMUT lt n gt CME ERROR lt err gt CMUT CMUT list of supported lt n gt s Description This command is used to enable and disable the uplink voice muting during a voice call The test command returns the supported values as a compound value Defined values 0 mute off 1 mute on 6 3 5 Loudspeaker volume level CLVL Command Response Default CLVL CLVL lt level gt CLVL CLVL list of supported lt level gt s Description This command is used to select the volume of the internal loudspeaker of the ME The test command returns the supported values as a compound value Defined values lt level gt integer type value with manufacturer specific range smallest value represents the lowest sound level 6 3 6 CBST Select bearer service type Command Response Default CBST lt speeds gt lt name gt lt ce gt CBST lt speed gt lt name gt lt ce gt Test CBST CBST 0 7 12 14 16 34 36 38 39 43 47 51 65 66 68 70 71 75 9 81 0 2 0 3 The CBST command selects the bearer service with a data rate and the connection element to be used when data calls are originated The values may also be used during a mobile terminated data call setup especially in the case of single numbering scheme calls refer CSNS Defined values Copyright Nokia Mobile Phones 2001 All rights reserved 31 NOKIA L
44. TP Recipient Address Address Value field in string format type of address given by lt tora gt lt tora gt GSM 04 11 TP Recipient Address Type of Address octet in integer format 129 unknown telephony 145 internal telephony lt scts gt GSM 03 40 TP Service Centre Time Stamp in time string format lt dt gt GSM 03 40 TP Discharge Time in time string format yy MM dd hh mm ss zz Copyright Nokia Mobile Phones 2001 All rights reserved 91 NOKIA List of AT Commands for Nokia 22 lt st gt GSM 03 40 TP Status in integer format lt length gt the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length lt pdu gt GSM 04 11 SC address followed by GSM 03 40 TPDU in hexadecimal format 14 4 6 CMS ERROR Message service failure Format Description CMS ERROR lt err gt Given instead of ERROR when error is related to ME or network operation Defined values lt err gt see the Error values section Copyright Nokia Mobile Phones 2001 All rights reserved 92 NOKIA List of AT Commands for Nokia 22 15 ERROR VALUES 15 1 CME ERROR values The columns in the following table indicate which AT commands can return the numeric lt err gt value given in the topmost row The Numbers in the cells indicate what kind of an error can generate the lt err gt The meanings of the numbers are given after the table An example of the CNUM command Numeric error
45. The test command returns the supported values Defined values lt N gt 0 disable CME ERROR lt err gt result code and use ERROR instead 1 enable CME ERROR lt err gt result code and use numeric lt err gt values 2 enable CME ERROR lt err gt result code and use verbose lt err gt values See also the result code CME ERROR Copyright Nokia Mobile Phones 2001 All rights reserved 59 NOKIA List of AT Commands for Nokia 22 10 SMS COMMANDS GSM 07 05 10 1 CSMS Select message service Command Default Set CSMS lt service gt CSMS 1 1 1 1 1 jo 1 CSMS CSMS lt service gt 1 1 1 Ys CSMS CSMS 0 1 The CSMS command selects the messaging service lt service gt The read command returns the current service setting The test command returns a list of all the supported services Defined values lt service gt 0 GSM 03 40 and 03 41 the syntax of the SMS AT commands is compatible with GSM 07 05 Phase 2 version 4 7 0 The phase 2 features which do not require a new command syntax may be supported e g correct routing of messages with new Phase 2 data coding schemes 1 GSM 03 40 and 03 41 the syntax of the SMS AT commands is compatible with the GSM 07 05 Phase 2 version the requirement of the setting 1 is mentioned under the corresponding command descriptions 10 2 CPMS Preferred message storage Command Response cms error X CPMS lt mem1 CPMS lt used1 gt lt total1
46. W Accepted but ignored V 25ter semicolon I voice call originating must be the last character of command line GSM 07 07 modifiers direct dialling from the phonebook must be the first char after D see next table i allow calling line id presentation for this call i restrict calling line id presentation for this call IG control CUG information for this call use CCUG values De facto fL redial to the number last dialled NOTE I is the only case sensitive dial string character Direct dialling Description command error D gt mem lt n gt i I G Originate call to the phone number found in the location lt n gt in a specific memory mem which is one of the two letter memory abbreviations as returned by CPBS without double quotes the location range can be queried with CPBR note that in case of a SIM ADN memory SM D gt SIM lt n gt shall also be accepted due to inconsistency in 07 07 D gt lt n gt i I G Originate call to the phone number in memory location lt n gt the memory selected with CPBS is used 6 1 2 T Select tone dialling Execute T _ The T command is ignored The implementation is according to GSM 07 07 section 6 18 6 1 3 P Select pulse dialling Execute P The P command is ignored The implementation is according to GSM 07 07 section 6 18 Copyright Nokia Mobile Phones 2001 All rights reserved 24 NOKIA List of AT Commands for Nokia 22 6 1 4
47. a ASYNC normal data VOICE REL ASYNC voice followed by data BS 81 ALT VOICE REL ASYNC alternating voice data voice first BS 61 ALT REL ASYNC VOICE alternating voice data data first BS 61 ALT VOICE FAX alternating voice fax voice first TS 61 ALT FAX VOICE alternating voice fax fax first TS 61 14 3 5 CLIP Calling line identification report Format Description 3 CLIP lt number gt lt type gt given when CLIP 1 and number received from network when MT call received no active or held calls in ME The CLIP result code is sent to the TE after every RING or CRING result code This result code is enabled and disabled with the CLIP command Defined values lt number gt string type phone number of a format specified by lt type gt Copyright O Nokia Mobile Phones 2001 All rights reserved 84 NOKIA List of AT Commands for Nokia 22 lt type gt type of address octet in integer format refer GSM 04 08 subclause 10 5 4 7 129 unknown telephony 145 international telephony 14 3 6 CSSU Unsolicited supplementary service notification Format Description S O CSSU lt code gt lt index gt lt number gt given when CSSN 1 and some supplementary service notification lt type gt is given by the network during a MT call setup or during a voice call note that a remote release of a held call is also informed with this result code In the MT call setup case the CSSU result code is sent to the TE
48. after every possible CLIP result code In the case of a waiting call this is given after the CCWA result code but discarded if the Nokia 22 is in the on line data state This result code is enabled and disabled with the CSSN command Defined values lt index gt refer Closed user group CCUG lt code gt 0 this is a forwarded call MT call setup 1 this is a CUG call also lt index gt present MT call setup 2 call has been put on hold during a voice call 3 call has been retrieved during a voice call 4 multiparty call entered during a voice call 5 call on hold has been released this is not a SS notification during a voice call 7 call is being connected alerting with the remote party in the alerting state in an explicit call transfer operation during a voice call call has been connected with the other remote party in an explicit call transfer operation number and subaddress parameters may also be present during a voice call or a MT call setup lt number gt string type phone number of a format specified by lt type gt lt type gt type of address octet in integer format refer to GSM 04 08 subclause 10 5 4 7 129 unknown telephony 145 international telephony 14 3 7 CCWA Call waiting Format CCWA lt number gt lt type gt lt class gt given when CCWA 1 and incoming MT call is received when there is active or held calls in the ME discarded if in the on line data state Copyright
49. ard but here it is referred to as a public standard The Nokia 22 can be operated using a compatible computer or other devices with a 9 pin RS232 connector Copyright Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 2 DATA CONNECTIONS The Nokia 22 supports non transparent and transparent data connections and High Speed Circuit Switched Data HSCSD in non transparent mode which enables a higher data transfer rate Time slot usage is presented as the number of up and down links The Nokia 22 data transfer modes are presented in Table 1 Table 1 The Nokia 22 data transfer modes Data transfer mode Non transparent data Asynchronous data 9600 kbps Asynchronous data 14400 kbps Asynchronous data HSCSD Multislot 1 1 2 2 3 1 Transparent Asynchronous data 2400 kbps Asynchronous data 4800 kbps Asynchronous data 9600 kbps Asynchronous data 14400 kbps Copyright O Nokia Mobile Phones 2001 All rights reserved 10 NOKIA List of AT Commands for Nokia 22 3 AT COMMAND SYNTAX For basic information on the AT command syntax refer to section V 25ter and to the GSM 07 07 section 4 This chapter describes the three different AT command formats and the default value mechanisms for their parameters 3 1 Register commands Table 2 Register command format in command description subsections Command Response k lt n gt values rr Set nn x y defaultz The r
50. cited result code CREG lt stat gt lt lac gt lt ci gt lt stat gt 0 not registered the ME is not currently searching for a new operator to register to 1 registered home network 2 not registered but ME is currently searching for a new operator to register to 3 registration denied 4 unknown 5 registered roaming lt lac gt string type a two byte location area code in hexadecimal format e g 00C3 equals 193 in decimal lt ci gt string type a two byte cell ID in hexadecimal format 7 3 COPS Operator selection Command Response pefout seme eror COPS lt mode gt 0 2 lt format gt lt oper gt Read Read COPS COPS SE lt format gt lt oper gt h 0 1 2 The COPS command forces an attempt to select and register the GSM network operator lt mode gt is used to select whether the selection is automatically carried out by the Nokia 22 or whether it is forced by this command to the operator lt oper gt given in numeric 2 lt format gt The selected operator name format shall also apply to the further read commands COPS7 The read command returns the current mode and the currently selected operator If no operator is selected lt format gt and lt oper gt are omitted The test command returns a list of quadruplets each representing an operator that is present in the network A quadruplet consists of an integer indicating the availability of the operator lt stat gt and a num
51. class2 gt lt band2 gt eta aon O 0 0 4 5 1 0 2 This command is used to set the preferred ME power class for each supported GSM frequency band The interaction of this setting with the selected bearer service CBST and HSCSD commands is manufacturer specific for example selecting a multislot operation might reduce the power class automatically If the setting fails in an ME error the CME ERROR lt err gt is returned The read command returns the currently selected output power class and default output power class for each supported frequency band as defined by the ME manufacturer The parameter lt band1 gt and its associated power class parameters refer to the currently used frequency band For example CPWC 2 1 1 5 4 0 in the case of a dual band ME currently using the band GSM1800 for which the power class is currently set to 2 the default being class 1 and the currently set power class value for GSM900 is class 5 the default being class 4 The test command returns the supported bands and their power classes For example CPWC 0 0 4 5 1 0 2 in a case of a dual band handheld ME Defined values lt class gt lt curr_classn gt s lt def_classn gt s 0 default not applicable to lt curr_class gt s or lt def_classn gt s Tea MS output power class as in GSM 05 05 38 lt band gt lt bandn gt s 0 GSM900 1 GSM1800 S reserved for GSM1900 Copyright O Nokia Mobile Phones 2001 All right
52. cme error Execute Ice JI y CHLD test CHED CHLD 0 1 1x 2 2x 3 4 Optional See ETSI GSM 07 07 2 section 7 12 Controls call hold multiparty and explicit call transfer supplementary service operations as defined in GSM 02 30 section 4 5 5 1 A short description of lt n gt values 0 release waiting or incoming call send busy cause to network or held calls 1 release active calls and accept another waiting or held call 1x release active call x 2 active calls on hold and accept another waiting or held call 2x active multiparty call on hold except for call x 3 add a held call to a multiparty call 4 connect a held call to an active or MO alerting call locally both calls are disconnected 7 16 CAOC Advice of charge Command response cme error execute caoc lt mode gt CAOC lt ccm gt read caoc CAOC lt mode gt test caoc Jf t eaoe 052 1 Optional See ETSI GSM 07 07 2 section 7 15 Returns the current call meter value in home units from the ME Copyright O Nokia Mobile Phones 2001 All rights reserved 51 NOKIA List of AT Commands for Nokia 22 8 ME CONTROL AND STATUS COMMANDS GSM 07 07 8 1 CPWC ME power class control Command Response cme error CPWC lt class gt lt band gt CAOC lt ccm gt execute CPWC CPWC lt curr classl gt lt def classl gt lt bandl gt lt curr_class2 gt lt def_
53. cted memory the number of used locations and the total number of the locations in the memory The test command returns the supported storages Defined values lt storage gt DC ME dialled calls list CPBW is not applicable for this storage EN SIM or ME emergency number CPBW is not applicable for this storage FD SIM fixdialling phonebook MC ME missed unanswered received calls list CPBW not applicable for this storage ME ME phonebook ON SIM or ME own numbers MSISDNs list reading of this storage is also available using CNUM RC ME received calls list CPBW is not applicable for this storage SM SIM phonebook CPBR Read phonebook entries Command Response cme error CPBR lt index1 gt CPBR lt index1 gt lt number gt lt type gt lt text gt lt index2 gt lt CR gt lt LF gt CPBR lt index2 gt lt number gt lt type gt lt text gt CPBR CPBR lt index gt list lt nlength gt lt tlength gt The CPBR command returns phonebook entries in the location number range lt index1 gt lt index2 gt from the current phonebook memory storage selected using the CPBS The entry fields returned are the location number lt indexn gt the phone number stored there lt number gt of the Copyright Nokia Mobile Phones 2001 All rights reserved 55 NOKIA List of AT Commands for Nokia 22 format lt type gt and text lt text gt associated with the number I
54. d 6 3 15 CHSC Current call parameters execute casc cksc lt gt lt td alu lt couing mr EE Parameters lt rx gt integer type the number of receive timeslots currently in use lt tx gt integer type the number of transmit timeslots currently in use lt aiur gt integer type the current air interface user rate in case of a transparent service this Se SE network user rate Refer to the CHSN command for the possible lt coding gt current channel coding Refer to the CHSD command for the possible values CVHU voice hang up control Copyright Nokia Mobile Phones 2001 All rights reserved 37 NOKIA List of AT Commands for Nokia 22 6 3 16 CVHU Voice Hang Up Control Command response default set cvau xmode Gem cv mode E teva 0 2 By default NMP products should ignore the DTR drop but disconnect on the ATH during a call that is in the voice mode GSM 07 07 section 6 Copyright O Nokia Mobile Phones 2001 All rights reserved 38 NOKIA List of AT Commands for Nokia 22 7 NETWORK SERVICE COMMANDS GSM 07 07 7 1 CNUM Subscriber number CNUM CNUM lt alpha1 gt lt number1 gt lt type1 gt D lt CR gt lt LF gt CNUM lt alpha2 gt lt number2 gt lt type2 gt CNUM The CNUM command returns the MSISDNs related to the subscriber This information can be stored in the SIM If the subscriber has different MSISDNs for diffe
55. d Information text transmitted in response to commands is not affected by this command 4 1 6 V DCE response format V 0 numeric V 25ter basic syntax result codes limited headers and trailers Vi Verbal V 25ter basic syntax result codes full headers and trailers The V command determines the contents of the header and trailer transmitted with result codes and information responses It also determines whether the result codes are transmitted in numeric or verbal format The text portion of information responses is not affected by this setting The command S3 and S4 settings affect header and trailer formatting Note that the result codes defined in GSM 07 07 and 07 05 have only verbal values 4 1 7 X Result code selection and call progress monitoring control X 0 OK CONNECT RING NO CARRIER ERROR codes enabled also CONNECT 1200 CONNECT 2400 enabled also BUSY enabled also NO ANSWER enabled also CONNECT 4800 or higher data rates CARRIER DELAYED BLACKLISTED enabled The X command defines the call progress result codes that are sent from the Nokia 22 to the DTE When BUSY NO ANSWER DELAYED or BLACKLISTED are not enabled NO CARRIER is used instead When CONNECT lt rate gt with a correct data lt rate gt is not enabled CONNECT is used instead This command only affects the presentation of the result codes mentioned in this table Copyright Nokia Mobile Phones 2001 All rights reserved 14 NOKIA List of AT C
56. ddress coded into TPDU equals zero The SMSC address may change also when the CRES is taken action The read command returns the current SMSC address settings Defined values lt sca gt GSM 04 11 RP SC address Address Value field in string format lt tosca gt GSM 04 11 RP SC address Type of Address octet in integer format 129 unknown telephony 145 international telephony 10 5 CSMP Set text mode parameters Command Response eft CSMP lt fo gt lt vp gt lt pid gt lt des gt po 17 187 0 0 CSMP CSMP lt fo gt lt vp gt lt pid gt lt dcs gt CSMP fe a El The CSMP command is used to select values for the additional parameters needed when the SM is sent to the network or placed in a storage when the text format message mode is selected It is possible to set the validity period starting from the moment when the SM is received by the SMSC lt vp gt is in range 0 255 or to define the absolute time of the validity period termination lt vp gt is a string The format of lt vp gt is given by lt fo gt The values of these parameters may change also when the CRES is used NOTE When storing a SMS DELIVER from the TE to the preferred memory storage in the text mode refer command Write Message to Memory CMGW the lt vp gt field can be used for lt scts gt Defined values lt fo gt first octet of GSM 03 40 SMS DELIVER or SMS SUBMIT in integer format lt vp gt depending on the SMS SUBMIT lt fo gt s
57. default 43 lt n gt 000 127 The S2 command specifies the character to be used in the escape sequence The default character is a plus sign See also the Escape command 6 2 4 S12 Escape guard time Set Si2 lt n gt 10 255 default 50 lt n gt 000 255 The 512 command sets the guard time before and after the escape sequence The value is in fiftieths of a second default is one second See also the Escape command 6 2 5 Escape During the online data state it is possible to enter the online command state by giving three same characters defined by S2register default is in a sequence Before and after the sequence there must be a pause of at least the time defined by the S12 register By setting S12 to zero an escape sequence detection can be disabled 6 3 GSM 07 07 6 3 1 CSTA Select type of address Command Response Default Set CSTA lt type gt ze CSTA CSTA lt type gt i 3 CSTA CSTA 129 145 Bee The CSTA command selects the type of number according to the GSM specifications The dial command D always uses this setting except for the case when the dial string includes the international access code character In this case the type of address sent to the network defaults to 145 Copyright Nokia Mobile Phones 2001 All rights reserved 29 NOKIA List of AT Commands for Nokia 22 Defined values lt type gt type of number refer to GSM 04 08 10 5 4 7
58. dicate data lt class gt 2 the not active case is displayed only when the SS is not active to any service i e CCFC 0 7 Parameters lt reason gt unconditional mobile busy no reply not reachable all call forwarding GSM 02 30 all conditional call forwarding GSM 02 30 OO P Go OH lt mode gt disable 1 enable 2 query status 3 registration 4 erasure lt number gt string type phone number of forwarding address in the format specified by lt type gt lt type gt type of address octet in integer format GSM 04 08 subclause 10 5 4 7 The default value is 145 when the dialling string includes the international access code character otherwise the default value is129 lt subaddr gt KE type subaddress of the format specified by lt satype gt lt satype gt type of subaddress octet in integer format GSM 04 08 subclause 10 5 4 8 The default value is 128 lt classx gt a sum of integers each representing a class of information the default value 7 equals all classes 1 voice 2 data 4 fax Copyright Nokia Mobile Phones 2001 All rights reserved DO NOKIA List of AT Commands for Nokia 22 also all other values below 128 are reserved lt time gt 1 30 when no reply is enabled or queried gives the time in seconds to wait before a call is forwarded The default value is 20 lt status gt 0 not active 1 active 7 15 CHLD Call related to SSs Command response
59. e PDU structure This example does not have the SMSC number 17 4 Sending a sample SMS in the text mode Command from the DCE Response Explanation from the Nokia 22 AT CMGF 1 Set the Nokia 22 to GSM 07 05 SMS Text mode The default value is the PDU mode 0 OK Previous command was successful AT CSCA 358508771010 1 Set the SMS Service Centre number to be 45 used with an outgoing SMS OK Previous command was successful AT CMGS 358705966200 1 Send the My SMS message to defined 45 lt CR gt My SMS lt CTRL Z gt phone number 145 specifies the phone number type CMGS Data Card responses to successful sending 60 with Message reference number OK Previous command was successful Copyright Nokia Mobile Phones 2001 All rights reserved 98 NOKIA List of AT Commands for Nokia 22 17 5 HSCSD command examples SS EECH Wanted air interface user 31 1 kHz rate AT CBST 0 0 1 CHSN 2 0 0 0 SR EECH Wanted air interface user rate 9200 8800 3200 SS fronnection Type Wanted air interface user v 120 rate 9600 AT CBST 51 0 1 CHSN 1 0 0 0 14400 AT CBST 51 0 1 CHSN 2 0 0 0 19200 AT CBST 51 0 1 CHSN 3 0 0 0 28800 AT CBST 51 0 1 CHSN 4 0 0 0 43200 AT CBST 51 0 1 CHSN 6 0 0 0 Q Can the application or terminal I am using directly receive incoming SMS A The received SMS messages are stored in the SIM card memory SM by default The messages can be read
60. e Reference in integer format lt ra gt GSM 03 40 TP Recipient Address Address Value field in string format type of address given by lt tora gt lt dt gt GSM 03 40 TP Discharge Time in time string format yy MM dd hh mm ss zz lt st gt GSM 03 40 TP Status in integer format lt ct gt GSM 03 40 TP Command Type in integer format lt mn gt GSM 03 40 TP Message Number in integer format lt pdu gt GSM 04 11 SC address followed by GSM 03 40 TPDU in hexadecimal format Copyright Nokia Mobile Phones 2001 All rights reserved 69 NOKIA List of AT Commands for Nokia 22 10 13 CNMA New message acknowledgement to ME TA Command Response cms error text mode CMGF 1 CNMA PDU mode CMGF 0 CNMA lt n gt Ee is given lt ctrl Z ESC gt Test CNMA PDU mode CMGF 0 Gre 0 2 Text mode The CNMA command confirms the correct reception of a new message SMS DELIVER or SMS STATUS REPORT which is routed directly to the TE This acknowledgement command causing the Nokia 22 to send RP ACK to the network shall be used when the CSMS parameter lt service gt equals 1 The Nokia 22 shall not send another CMT or CDS result code to the TE before the previous one is acknowledged If the Nokia 22 does not get acknowledgement within the required time network timeout the Nokia 22 will send a RP ERROR to the network Routing to the TE will automatically be disabled by setting both lt mt gt and lt ds gt values
61. e Service Short Message Service Centre Terminal Adapter the physical equipment where AT command interpreter resides May be combined with ME Terminal Equipment the physical equipment from where applications communicate with TA using AT commands Telecommunications Industry Association Universal Asynchronous Receiver Transmitter Universal Synchronous Receiver Transmitter Unstructured Supplementary Service Data Copyright Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 1 INTRODUCTION This document describes the AT commands that can be used to operate the Nokia 22 PBX connectivity terminal Other specifications on the terminal can be found in the Nokia 22 User s Guide and Nokia 22 Operator s Guide All the mandatory and optional ITU T V 25ter 1 ETS GSM 07 07 2 and ETS GSM 07 05 3 commands that are applicable to the Nokia 22 are included in the Nokia 22 command set The de facto commands that are widely used with modems are also supported Note that the ITU T V 25ter is a combination of three TIA standards TIA 602 TIA 615 IS 131 The Nokia 22 can be used as an adapter for a Group 3 facsimile terminal that supports facsimile Service Classes 1 2 and 2 0 The supported facsimile AT commands are listed according to the standards in which they are specified Service Class 1 TIA 578 A 4 Service Class 2 0 TIA 592 5 and Service Class 2 TIA SP 2388 6 TIA SP 2388 is a draft of a coming stand
62. e gt 2 this may refer only to some bearer service fax facsimile services also all other values below 128 are reserved by this ETS not active active string type phone number of a calling address in the format specified by lt type gt type of address octet in integer format refer GSM 04 08 8 subclause 10 5 4 7 optional string type alphanumeric representation of lt number gt corresponding to the entry found in the phonebook the used character set should be the one selected with the command Select TE Character Set CSCS Copyright O Nokia Mobile Phones 2001 All rights reserved 86 NOKIA List of AT Commands for Nokia 22 14 3 8 CREG Network registration CREG lt stat gt lt lac gt lt cid gt when CREG 1 given when lt stat gt value changes given after NO CARRIER if network lost when on line when CREG 2 given when lt stat gt value changes and when network cell lt lac gt and lt cid gt of the ME changes given after NO CARRIER if network lost when on line The CREG result code is enabled and disabled with the CREG command Defined values lt stat gt not registered the ME is not currently searching for a new operator to register to registered home network not registered but ME is currently searching a new operator to register to registration denied unknown registered roaming OO P Go A OH lt lac gt string type two byte location area code in hexadecimal format e g 00C3 equal
63. ed will use the character with the ordinal value 50 IA5 3 2 in place of the CR 4 1 2 54 Response formatting character Set S4 xn gt 10 127 default 10 lt n gt 000 127 The S4 command sets the decimal IA5 value of the character generated by the DCE as a part of the header trailer and terminator for result codes and information text along with the S3 parameter see the description of the V command for usage If the value of S4 is changed in a command line the result code issued in response to that command line will use the new value of S4 4 1 3 55 Command line editing character Command response lt n gt values Set S5 lt n gt 0 127 default 8 lt n gt 000 127 The S5 command sets the decimal IA5 value of the character recognised by the DCE as a request to delete the immediately preceding character from the command line Copyright Nokia Mobile Phones 2001 All rights reserved 13 NOKIA List of AT Commands for Nokia 22 4 1 4 E Command echo E 0 echo The E command determines whether or not the DCE echoes characters received from the DTE during the command state and the online command state 4 1 5 Q Result code suppression Qjo transmitcodes The Q command determines whether the DCE transmits result codes to the DTE When result codes are being suppressed no portion of any intermediate final or unsolicited result code header result text line terminator or trailer is transmitte
64. egister command factory default value amp F is given in parentheses under the column lt n gt values The existence of a register command can be queried by giving a command without equal or question marks i e ATS3 returns OK but it does not change the lt n gt setting lt n gt cannot be omitted when its value is set i e ATS3 returns ERROR 3 1 1 Basic commands Table 3 Basic command format in command description subsections Command Description _ _ Set execute CMD x for value x CMDy The commands D dial A answer and O return to online data state include also columns for possible result codes The basic command no prefix amp F default value is underlined If no value is underlined the setting of that command is not stored in the non volatile memory the command amp Y is an exception If the command parameter is in brackets usually zero the parameter can be omitted 3 1 2 Extended commands Table 4 Extended command format in command description subsections Command Response cme error cms error ed CMD lt y gt CMD Lupi o A ef CMD CMD The extended command prefix parameter default values are given in a separate column If the default value is not in brackets the default value is the amp F default value of the corresponding parameter When such a parameter is omitted from a command its value remains the same as before If the defau
65. eric representation of the operator The list of operators shall be in the following order home network networks referenced in SIM and other networks After the operator list is returned the Nokia 22 returns lists of the supported lt mode gt s and lt format gt These lists shall be delimited from the operator list with two commas Defined values lt mode gt 0 automatic lt oper gt field is ignored manual lt oper gt field shall be present Copyright O Nokia Mobile Phones 2001 All rights reserved 40 NOKIA List of AT Commands for Nokia 22 lt format gt 2 numeric lt oper gt lt oper gt The numeric format is the GSM Location Area Identification number refer GSM 04 08 10 5 1 3 which consists of a three BCD digit country code coded as in ITU T E 212 Annex A plus a two BCD digit network code which is administration specific returned lt oper gt shall not be in Binary Coded Decimal BCD format but in IRA characters converted from BCD hence the number has the following structure country code digit 3 country code digit 2 country code digit 1 network code digit 2 network code digit 1 lt stat gt 0 unknown 1 available 2 current 3 forbidden 7 4 CLCK Facility lock Command Response cme error CLCK lt fac gt lt mode gt when lt mode gt 2 lt passwd gt lt class gt CLCK lt status gt lt class1 gt lt CR gt lt LF gt CLCK lt status gt lt class2 gt CLCK CLCK P8
66. et 1CF lt format gt lt parity gt E E ICF lt format gt lt parity gt ICF 3 5 0 3 GE The ICF command is used to determine the local serial port start stop character framing that the Nokia 22 uses when accepting DTE commands and when transmitting information text and a result NOTE The reset commands Z and amp F do not change this setting Defined values lt format gt determines the number of bits in the data bits the presence of a parity bit and the number of stop bits in the start stop frame 3 8 data 1 stop 5 7 data 1 parity 1 stop lt parity gt determines how the parity bit is generated and checked if present 0 odd 1 even 2 mark 3 space 4 1 12 IFC DTE DCE local flow control Command Response Default Set IFC lt dce by dte gt lt dte by dee gt Pa a ee IFC lt dce by dte gt lt dte by dce gt IFC 0 3 0 2 meer The IFC controls the operation of a local flow control between the DTE and the Nokia 22 Defined values lt dce by dte gt specifies the method to be used by the DTE to control the flow of the received data from the Nokia 22 lt dte by dce gt specifies the method to be used by the Nokia 22 to control the flow of the transmitted data from the DTE no flow control software flow control KON XOFF hardware flow control RTS CTS software flow control XON XOFF with flow control characters passed also to the remote DCE ono Copyright Nokia Mobi
67. etting GSM 03 40 TP Validity Period either in integer format or in time string format lt pid gt GSM 03 40 TP Protocol Identifier in integer format lt dcs gt GSM 03 38 SMS Data Coding Scheme in integer format 10 6 CSDH Show text mode parameters Command Response Default Set__ CSDH lt show gt 10 CSDH CSDH lt show gt CSDH CSDH 0 1 a Copyright Nokia Mobile Phones 2001 All rights reserved 62 NOKIA List of AT Commands for Nokia 22 The CSDH command controls whether detailed header information is shown in the text mode result codes The test command returns the supported values as a compound value Defined values lt show gt 0 do not show header values defined in the commands CSCA and CSMP lt sca gt lt tosca gt lt fo gt lt vp gt lt pid gt and lt dcs gt nor lt length gt lt toda gt or lt tooa gt in the CMT CMGL CMGR result codes for SMS DELIVERs and SMS SUBMITs in the text mode for SMS COMMANDs in the CMGR result code do not show lt pid gt lt mn gt lt da gt lt toda gt lt length gt or lt cdata gt 1 show the values in result codes 10 7 CSCB Select cell broadcast message types Command Response cms er Set CSCB lt mode gt lt mids gt lt dcss gt CSCB CSCB lt mode gt lt mids gt lt dccs gt Sa ae CSCB CSCB 0 1 The CSCB command defines the types of CBMs that are to be received The test command ret
68. f all the queried locations are empty but available no information text lines can be returned The test command returns the location range supported by the current storage as a compound value and the maximum lengths of the lt number gt and lt text gt fields In the case of a SIM storage the lengths may not be available Defined values lt index1 gt lt index2 gt lt index gt Integer type values in the range of the location numbers of the phonebook memory lt number gt string type phone number of the format lt type gt lt type gt type of address octet in integer format refer to GSM 04 08 10 5 4 7 129 unknown telephony 145 international telephony lt text gt string type field of the maximum length of lt tlength gt lt nlength gt integer type value indicating the maximum length of the lt number gt field lt tlength gt integer type value indicating the maximum length of the lt text gt field 8 7 CPBF Find phonebook entries Command Response cme error CPBF lt findtext gt CPBF lt index1 gt lt number gt lt type gt lt text gt lt CR gt lt LF gt CPBF lt index2 gt lt number gt lt type gt lt text gt CPBF CPBF lt nlength gt lt tlength gt The CPBF command returns phonebook entries from the current phonebook memory storage selected using the CPBS which an alphanumeric field start with the lt findtext gt string The entry fields returned are the location number l
69. face NOTE The values that are not stored shall remain intact The test command shall display the supported profile numbers for reading and writing of settings 10 9 CRES Restore settings Command Response cms error Execute CRES lt profile gt xX CRES eet 0 1 The CRES command restores message service settings from the non volatile memory to the active memory The settings specified in the commands Service Centre Address CSCA Set Message Parameters CSMP and Select Cell Broadcast Message Types CSCB are restored If the protocol id data coding scheme or validity period is restored the CSMP parameter lt fo gt is forced to be SMS SUBMIT i e bits 1 0 are set to 01 In addition if a validity period is restored lt fo gt is forced to indicate the relative validity period format i e bits 4 3 are set to 10 The rest of the lt fo gt bits are set to zero The test command shall display the supported profile numbers 10 10 CNMI New message indications to TE EC error ll Sal EJ lt bm gt lt ds gt lt bfr gt CNMI lt mode gt lt mt gt lt bm gt lt ds gt lt bfr gt CNMI 0 2 0 3 0 2 3 0 2 0 1 The CNMI command defines the procedure for indicating the receiving of new messages from the network to the TE when the TE is active e g DTR signal is ON If the TE is inactive e g DTR signal is OFF message receiving should be done as specified in GSM 03 38 lt mode gt
70. fferent SM types The TE application can recognise the response format by examining the third response parameter The test command shall give a list of all the supported status values PDU mode The CMGL command returns messages with the status value lt stat gt from the preferred message storage lt mem1 gt to the TE Entire data units lt pdu gt are returned If the status of the message is received unread the status in the storage changes to received read Defined values lt stat gt integer type in the PDU mode default 0 or string type in the text mode indicates the status of the message in the memory REC UNREAD received unread message i e new message REC READ received read message STO UNSENT stored unsent message only applicable to SMs STO SENT stored sent message only applicable to SMs ALL all messages only applicable to the CMGL command RON 0O lt index gt integer type value in the range of location numbers lt oa da gt GSM 03 40 TP Originating Destination Address Address Value field in string format type of address given by lt tooda toda gt lt scts gt GSM 03 40 TP Service Centre Time Stamp in time string format lt tooa toda gt lt tora gt GSM 04 11 TP Originating Destination Address Type of Address octet in integer format 129 unknown telephony 145 internal telephony lt length gt integer type value that indicates the length of the message body lt data gt in characters i
71. fined values lt type gt NONE Data compression is not in use V42B V 42 bis is in use in both directions V42B RD V 42 bis is in use in receive direction only V42B TD V 42 bis is in use in transmit direction only 14 1 3 ILRR DTE DCE local rate report Format Description ILRR lt rate gt given when ILRR 1 informs about the local port rate after connection establishment The ILRR intermediate result code is given after the possible DR result code Copyright Nokia Mobile Phones 2001 All rights reserved 82 NOKIA List of AT Commands for Nokia 22 14 2 De facto 14 2 1 Call repeat restriction result codes BLACKLISTED and DELAYED Refer to the dialling command D and GSM 02 07 Annex A 14 3 GSM 07 07 14 3 1 CSSI Intermediate supplementary service notification Format Deseripton S O CSSI lt code gt given when CSSN 1 and some supplementary service notification is given by network during MO call establishment The CSSI is the first intermediate result code after the dial command D This result code is enabled and disabled with the CSSN command Defined values lt code gt unconditional call forwarding is active some of the conditional call forwards are active call has been forwarded call is waiting outgoing calls are barred incoming calls are barred CLIR suppression rejected NDOOWONM O 14 3 2 COLP Connected line identification report Format Cd Description COLP lt numbe
72. format 129 unknown telephony 145 internal telephony lt stat gt integer type in the PDU mode default 0 or string type in the text mode indicates the status of a message in the memory 0 REC UNREAD received unread message i e new message 1 REC READ received read message 2 STO UNSENT stored unsent message only applicable to SMs Copyright Nokia Mobile Phones 2001 All rights reserved 74 NOKIA List of AT Commands for Nokia 22 3 STO SENT stored sent message only applicable to SMs 4 ALL all messages only applicable to CMGL command lt index gt integer type value in the range of the location numbers lt length gt integer type value that indicates the length of the message body lt data gt in characters in the text mode CMGF 1 or that indicates the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length in the PDU mode CMGF 0 10 18 CMGD Delete message Execute CMGD lt index gt CMGD EE The CMGD command deletes a message from a preferred message storage location lt index gt 10 19 CMGC Send command Command Response cms error text mode CMGF 1 text mode CMGF 1 and sending text mode CMGC lt fo gt lt ct gt SCH lt mn gt lt da gt ok 2 0 0 lt toda gt lt CR gt text is entered lt ctrl Z ESC gt CMGC lt mr gt lt scts gt 0 129 145 PDU mode CMGF 0 PDU mode CMGF 0 and CMGC lt leng
73. get the connected line identity COL of the called party after setting up a mobile originated call The command enables or disables the presentation of the COL It has no effect on the execution of the COLR supplementary service in the network When enabled and called subscriber allows the COLP lt number gt lt type gt intermediate result code is returned before any CR or V 25ter responses The read command gives the status of lt n gt and triggers an interrogation of the provision status of the COLP service according to GSM 02 81 given in lt m gt The test command returns the supported values Defined values lt n gt sets shows the result code presentation status in the Nokia 22 0 disable 1 enable lt m gt shows the subscriber COLP service status in the network 0 COLP not provisioned 1 COLP provisioned 2 unknown e g no network etc lt number gt string type phone number of a format specified by lt type gt lt type gt type of address octet in integer format refer GSM 04 08 subclause 10 5 4 7 129 unknown telephony 145 international telephony Copyright O Nokia Mobile Phones 2001 All rights reserved 45 NOKIA List of AT Commands for Nokia 22 79 CCWA Call waiting Command Response cme error Set CCWA lt n gt lt mode gt lt class gt when lt mode gt 2 o 7 x CCWA lt status gt lt class1 gt lt CR gt lt LF gt CCWA lt status gt lt class2 gt CCWA CCWA lt n g
74. ghts reserved 77 NOKIA List of AT Commands for Nokia 22 12 MISCELLANEOUS COMMANDS 12 1 V 25ter 12 1 1 A Repeat last command line As first chars of a command line A repeats the previous command line form the Nokia 22 command line buffer Lowercase a is also accepted 12 1 2 547 Force fax class 2 2 0 error correction mode Command Response lt n gt values Set S47 lt n gt 10 2 defaultO lt n gt 000 002 It is recommended that this command should be used when the fax ECM is implemented The command is used to force the ECM on because fax software is not always capable of enabling it Defined values lt N gt 0 disabled 1 enabled with 64 byte frames 2 enabled with 256 byte frames Copyright O Nokia Mobile Phones 2001 All rights reserved 78 NOKIA List of AT Commands for Nokia 22 13 FAX COMMANDS The following standard facsimile F command sets are supported by Nokia 22 according to GSM 03 45 facsimile group 3 transparent The specification of these commands is out of the scope of this document The command structures can be found in the referred standards Class 1 TIA 578 A 4 Class 2 TIA SP 2388 6 Class 2 0 TIA 592 and ITU T T 32 7 In the classes 2 and 2 0 the Nokia 22 Error supports the correction mode ECM with 16k send and receive buffers The facsimile commands supported by the Nokia 22 are listed below 13 1 TIA 578 A FCLASS Select read or test Service Class FMI
75. gt lt used2 gt SM SM SM gt lt total2 gt lt used3 gt lt total3 gt lt mem2 gt lt mem3 gt CPMS CPMS lt mem1 gt lt used1 gt lt total1 gt lt mem2 gt HA El lt used2 gt lt total2 gt lt mem3 gt lt used3 gt lt total3 gt CPMS CPMS ME SM ME SM SM The CPMS command selects the memory storage lt mem1 gt lt mem2 gt and lt mem3 gt to be used for reading writing etc The test command returns lists of the supported memory storage Defined values Copyright O Nokia Mobile Phones 2001 All rights reserved 60 NOKIA List of AT Commands for Nokia 22 lt mem1 gt memory from which messages are read and deleted the commands List Messages CMGL Read Message CMGR and Delete Message CMGD lt mem2 gt memory to which writing and sending operations are made the commands Send Message from Storage CMSS and Write Message to Memory CMGW lt mem3 gt memory to which received SMs are preferred to be stored unless forwarded directly to the TE refer to the command New Message Indications CNMI the received CBMs are always stored in the BM or some manufacturer specific storage unless directly forwarded to the TE the received status reports are always stored in the SR or a manufacturer specific storage unless directly forwarded to the TE ME ME message storage SM SIM message storage lt usedx gt integer type the number of messages currently in l
76. hony 145 internal telephony lt mr gt GSM 03 40 TP Message Reference in integer format lt scts gt GSM 03 40 TP Service Centre Time Stamp in time string format lt ackpdu gt GSM 03 40 RP User Data element of RP ACK PDU Copyright Nokia Mobile Phones 2001 All rights reserved 72 NOKIA List of AT Commands for Nokia 22 10 16 CMMS More messages to send Parameter Command Syntax Possible response s TEMME gt CMMS list of supported lt n gt s Description The set command controls the continuity of SMS relay protocol link When the feature is enabled and supported by network multiple messages can be sent much faster as the link is kept open The test command returns the supported values as a compound value Defined Values lt n gt 0 disable 1 keep enabled until the time between the response of the latest message send command CMGS CMSS etc and the next send command exceeds 1 5 seconds the exact value is up to the ME implementation then the ME shall close the link and the TA automatically switches lt n gt back to 0 2 enable if the time between the response of the latest message send command and the next send command exceeds 1 5 seconds the exact value is up to the ME implementation the ME shall close the link but the TA shall not automatically switch back to lt n gt 0 An example of the sending of a default alphabet message in the text mode and a SMS STATUS REPORT is wanted AT CNM
77. ication information Execute 0 Nokia Mobile Phones IMEI 13 22 RPM 3 GSM900 1800 same as GMM 18 P ignored values 5 1 4 GMI Request TA manufacturer identification Execute GMI Nokia Mobile Phones 5 1 5 GMM Request TA model identification Execute GMM 22 RPM 3 GSM900 1800 Copyright O Nokia Mobile Phones 2001 All rights reserved 19 NOKIA List of AT Commands for Nokia 22 5 1 6 GMR Request TA revision identification Execute GMR_ SWxxx S O 5 1 7 GSN Request TA serial number identification Execute GSN IMEI 5 1 8 GCAP Request complete capabilities list Execute GCAP GCAP CGSM FCLASS DS ES Defined values CGSM This is not a command to be used but it refers to the support of the GSM 07 07 AT command set The implementation is according to GSM 07 07 section 5 7 FCLASS A command to query the support of different facsimile classes DS Data Compression 5 2 De facto 5 2 1 amp V View configuration amp V Show current and stored profile settings all command parameter values defined under amp F plus amp Y setting 5 2 1 1 amp W Store configuration amp W 0 Store to profile 0 Store to profile 1 The amp W command stores the current parameter values in the given profile The command parameters that are stored in a profile are the same as those listed under the amp F command except for the parameters of the following commands that are not stored CMOD
78. ist of AT Commands for Nokia 22 lt speed gt 0 autobauding automatic selection of the speed this setting is possible in case of a 3 1 kHz modem and non transparent service 1 300 bps V 21 2 1200 bps V 22 3 1200 75 bps V 23 4 2400 bps V 22bis 5 2400 bps V 26ter 6 4800 bps V 32 7 9600 bps V 32 12 9600 bps V 34 14 14400 bps V 34 16 28800 bps V 34 34 1200 bps V 120 36 2400 bps V 120 38 4800 bps V 120 39 9600 bps V 120 43 14400 bps V 120 47 19200 bps V 120 48 28800 bps V 120 49 38400 bps V 120 50 48000 bps V 120 51 56000 bps V 120 65 300 bps V 110 66 1200 bps V 110 68 2400 bps V 110 or X 31 flag stuffing 70 4800 bps V 110 or X 31 flag stuffing 71 9600 bps V 110 or X 31 flag stuffing wa Da 75 14400 bps V 110 or X 31 flag stuffing 79 19200 bps V 110 or X 31 flag stuffing 80 28800 bps V 110 or X 31 flag stuffing lt name gt 0 data circuit asynchronous UDI or 3 1 KHz modem 2 PAD Access asynchronous UDI lt ce gt 0 transparent 1 non transparent 2 both transparent preferred 3 both non transparent preferred Copyright Nokia Mobile Phones 2001 All rights reserved 32 NOKIA List of AT Commands for Nokia 22 6 3 7 CRLP Radio link protocol CRLP lt iws gt lt mws gt EE 61 48 6 T1 gt lt N2 gt lt ver gt T4 gt RLP lt iws gt lt mws gt lt T1 gt lt N2 gt lt CR gt lt LF gt Test CRLP L 0 61 0
79. its operation ME is waiting for a network personalisation password ME is waiting for a network personalisation unblocking password ME is waiting for a network subset personalisation password ME is waiting for a network subset personalisation unblocking password ME is waiting for a service provider personalisation password ME is waiting for a service provider personalisation unblocking password ME is waiting for a corporate personalisation password ME is waiting for a corporate personalisation unblocking password 8 5 CSQ Signal quality Execute 085Q CSQ lt rssi gt 99 CSQ 0 31 99 99 ia The CSQ command returns the received signal strength indication lt rssi gt Copyright Nokia Mobile Phones 2001 All rights reserved 54 NOKIA List of AT Commands for Nokia 22 The test command returns the supported values Defined values lt rssi gt indicates the quality of the network coverage 0 No network coverage 6 Nokia 22 is connected to the network 12 Satisfactory coverage 18 Good coverage 24 Excellent coverage 8 6 CPBS Select phonebook memory storage Command Response Default cmeerror Set CPBS lt storage gt FSM CPBS CPBS lt storage gt xx Test CPBS CPBS ME SM FD ON EN MG SH RC The CPBS command selects the phonebook memory storage lt storage gt that is used by the other phonebook commands The read command returns the currently sele
80. lanation from the Nokia 22 AT amp F lt CR gt Set to factory defined configuration OK Previous command was succesful AT IFC 1 1 lt CR gt Set the flow control to SW flow control the default is HW flow control 2 2 OK Previous command was succesful AT amp DO lt CR gt Ignore DTR changes Copyright O Nokia Mobile Phones 2001 All rights reserved 97 List of AT Commands for Nokia 22 NOKIA OK Previous command was succesful Making a data call with Nokia 22 ATD 358705966200 Start connection with dialling the preferred number CARRIER The Nokia 22 has a data connection to the GSM infrastructure CONNECT The connection to the preferred number is established and the application can start sending data 17 3 Sending an SMS from a terminal or other similar application There are two different modes the text mode and the PDU Protocol Data Unit mode for handling short messages The default mode of the Nokia 22 is the PDU mode CMGF 0 A PDU quick guide is available at www forum nokia com the Nokia 22 developer section The text mode is easier to understand than the PDU mode AT CMGF 0 lt CR gt Set the Nokia 22 to GSM 07 05 SMS PDU mode default AT CMGS 29 lt CR gt gt 0011000C915358508181420000A7 1154747A0E4Acf41f4f29C9E769F41 21 Send the message to the defined phone number The service number is not a mandatory field in th
81. le Phones 2001 All rights reserved 16 NOKIA List of AT Commands for Nokia 22 4 1 13 ILRR DTE DCE local rate reporting Command Response Default Set ILRR lt n gt 0 ILRR ILRR lt n gt ILRR ILRR 0 1 PE The ILRR command controls whether the extended format ILRR lt rate gt information text is transmitted from the Nokia 22 to the DTE The lt rate gt reported represents the current DTE DCE rate If enabled the intermediate result code is transmitted after any error control or data compression reports are transmitted and before any final result code i e CONNECT is transmitted 4 1 14 ES Error control selection Command ES lt orig rqst gt 4 0 2 a fok gt lt ans fbk gt ig rast gt lt orig fbk gt lt ans fbk gt mer 4 ES 0 4 0 2 4 0 2 4 6 Mandatory when the V 42 error control is implemented See the ITU T Recommendation V 25ter section 6 5 1 These settings are only used in transparent data calls see CBST The supported parameter values depend on the V 42 modes that are supported Fallback to direct mode is not supported by Nokia products 4 1 15 EB Break handling in error control operation Command Response Cs default EB lt break sel gt 1 0 30 lt timed gt lt def length gt FEB lt break sel gt lt timed gt lt def length gt EB EB 0 3 0 1 0 254 Mandatory when the V 42 error control is imple
82. le Phones 2001 All rights reserved 42 NOKIA List of AT Commands for Nokia 22 7 5 CPWD Change password Command Response cme error Execute CPWD lt fac gt lt oldpwd gt lt newpwd gt fx CPWD PS B UST A CAB PEA The CPWD command sets a new password for the facility lock function defined by the Facility Lock CLCK command Note that the target lock has to be in lt mode gt 1 The test command returns a list of pairs that present the available facilities and the maximum length of their password Defined values lt fac gt PS PH SIM lock Phone to SIM card SC SIM lock SIM card AB All Barring services P2 SIM PIN2 lt oldpwd gt lt newpwd gt string type lt oldpwd gt shall be the same as the password specified for the facility from the ME user interface or using the Change Password CPWD command lt newpwd gt is the new password 7 6 CLIP Calling line identification presentation Command Response Default Set CLIP lt n gt 10 CLIP CLIP lt n gt lt m gt CLIP CLIP 0 1 The CLIP command refers to the GSM supplementary service CLIP Calling Line Identification Presentation that enables a called subscriber to get the calling line identity CLI of the calling party when receiving a mobile terminated call The CLIP command enables or disables the presentation of the CLI It has no effect on the execution of the CLIP supplementary service in the network
83. lt value is in brackets this value shall be used when the parameter is omitted Copyright O Nokia Mobile Phones 2001 All rights reserved 11 NOKIA List of AT Commands for Nokia 22 from the command line The setting of such a parameter is not stored in the memory If a parameter has no default value it must always be given NOTE Voice V and fax F commands do not exactly follow this format GSM commands can also return a CME ERROR or CMS ERROR final result code when the error is related to the ME or network functionality The last column indicates whether these codes can be returned The presentation of CME ERROR can be controlled with the CMEE command Copyright O Nokia Mobile Phones 2001 All rights reserved 12 NOKIA List of AT Commands for Nokia 22 4 TE TA INTERFACE COMMANDS 4 1 V 25ter 4 1 1 53 Command line termination character Command Response lt n gt values Set S3 lt n gt 0 127 default 13 lt n gt 000 127 The S3 command sets the decimal IA5 value of command line termination used by the DCE asa part of the header trailer and terminator for result codes and information text along with the S4 parameter see the description of the V command for usage If the value of S3 is changed on a command line the result code issued in response to that command line will use the new value of S3 For example if S3 was previously set to 13 and the command line ATS3 50 is issued the result code issu
84. mented See the ITU T Recommendation V 25ter section 6 5 2 These settings are only used in transparent data calls see CBST with V 42 enabled see ES 4 1 16 EFCS 32 bit frame check sequence Command response Default ser EE G s eres vater srcs 0 SS Mandatory when the V 42 error control is implemented See th ITU T Recommendation V 25ter section 6 5 4 Controls the use of the 32 bit frame check sequence option in the V 42 error control mode The 32 bit FCS is not supported by Nokia products Copyright Nokia Mobile Phones 2001 All rights reserved 17 NOKIA List of AT Commands for Nokia 22 4 1 17 ER Error control reporting Command response default E Read orr en moos Test er tr 0 0 Mandatory when the V 42 error control is implemented See the ITU T Recommendation V 25ter section 6 5 5 Controls the presentation of the ER intermediate result code 4 1 18 ETBM Call termination buffer manage Command response default ER E 11 20 Read pea a em ees Test eme vere 0 2 0 2 0 30 Mandatory when the V 42 error control is implemented See the ITU T Recommendation V 25ter section 6 5 6 These settings may also be used in a non transparent data call buffer management 4 2 Defacto 4 2 1 S25 Detect DTR change time Set S25 lt n gt 0 255 default 0 The S25 command sets the time i
85. mmand Response Execute CEER CEER lt report gt CEER 0 The CEER command returns the reason for the last call setup or in call modification failure or the reason for the last last call release lt report gt is the textual representation of the network cause value as listed in GSM 04 08 annex H 6 3 10 CRC Cellular result codes Command Response Default Set CRC lt mode gt Cd Read CRC CRC lt mode gt CRC 0 1 The CRC command controls whether the extended format of an incoming call indication is used When enabled an incoming call is indicated with the unsolicited result code CRING lt type gt instead of the normal RING Defined values lt mode gt 0 disables extended format 1 enables extended format lt type gt FAX facsimile TS 62 VOICE normal voice TS 11 VOICE REL ASYNC voice followed by data BS 81 ASYNC normal data BS 81 REL ASYNC normal data BS 81 ALT VOICE REL ASYNC alternating voice data voice first BS 61 ALT REL ASYNC VOICE alternating voice data data first BS 61 ALT VOICE FAX alternating voice fax voice first TS 61 ALT FAX VOICE alternating voice fax fax first TS 61 Copyright Nokia Mobile Phones 2001 All rights reserved 34 NOKIA List of AT Commands for Nokia 22 6 3 11 CHSR Current call parameters reporting Set scusr lt mode gt Read CHSR CHSR lt mode gt Test casr roas DJ O When the CHSR 1 is set the
86. n orrrnnnrrrrnnnnrnnnnvrrrnnnnnnnnnnnnnnnrrrennnnrnnnnrrrnnnnne 20 5 3 3 CGMR Request ME revision identification rrnrorrrnnnnnnnnnrrrrnnnnrnnnrrrrrnnnnnnnnrrrnnrrrrnennnnn 20 5 3 4 CGSN Request ME serial number identification rrrnnrrrrrnnnnnnnonnnnnvrrrnnnnnnnnrnrnnnnrrrnnnn 20 5 3 5 CSCS Select TE character sekuuvrva vav74enssdeenspkserdr ete danene 20 5 3 6 WS46 Select wireless pnetwork AEN 21 6 Call control COM MANOS EE EE 22 EEE FE RENE E A a Aa 22 GT JD PE WEE 22 6 1 2 T Select tone dialling EE 23 6 1 3 P Select pulse delen ett geuegteg eeh S ENEE ERENNERT 23 6 1 4 A Answer response eege Zeta Ee ec ege eg ee 24 6105 FL Hook CON eee anhortee 24 6 1 6 O Return to online data state varen EN 25 EE S0 Automatic ans Wek Zeene ee eg r E bvebal Reunite 25 6 1 8 S6 Pause before blind dialling c iccececcsccseccetesaceedeteusttsvestanteestbeedsianteuevedeteebigeescbenbiateasreae 25 6 1 9 S7 Connection completion time out ENEE 25 6 1 10 S8 Comma dial modifier time ENEE 26 6 1 11 STO Automatic elen EE 26 6 1 12 L Monitor speaker El 26 6 1 13 IM Monitor speaker EE 26 6 1 14 DS Data GOEDERT geess EEN REENEN SCENE 26 6 1 15 DR Data Compression reporting rrrrrvnnnnnnnnvnnvrnnnnnnnrnrnnnvrrnnnnrrrnnnnnrrnnnennennnnrrrnnnenesennn 27 ee EE E 27 62 al BOOTT BEL E 27 622 leie Kee EE 28 6 2 3 S2 Escape code character ua vrsvrmaamiesesmadjsdhgneugevtgunduumeanann 28 6 2 4 S12 ESGape guard Kul EE 28 025 4 EE 28 6 3 GSM KE
87. n Answer parameter Buffer size Copyright Nokia Mobile Phones 2001 All rights reserved 81 NOKIA List of AT Commands for Nokia 22 14 RESULT CODES 14 1 V 25ter 14 1 1 Basic syntax result codes OK ERROR BUSY CONNECT CONNECT lt rate gt NO ANSWER NO CARRIER See the ITU T Recommendation V 25ter section 5 7 1 and the X D A and O commands in this document Note that OK can be a result of a successful remotely initiated in call modification from data to speech mode and CONNECT lt rate gt can be a result of a successful remotely initiated in call modification from speech to data mode NO CARRIER can also indicate a remote hang up of a speech call RING See ETSI GSM 07 07 2 section 7 12 See the ITU T Recommendation V 25ter section 6 3 4 and the CRC command in this document The MT voice calls or alternating voice data calls starting with voice shall not result to this indication When the RING result code is enabled CRC 0 alternating MT voice fax calls starting with voice shall automatically be switched into the fax mode by the Nokia 22 if CMOD 0 Note that the RING result code is not given for waiting calls 14 1 2 DR Data compression report DR lt type gt given when DR 1 informs about the presence of V 42bis data compression in the established connection The DR intermediate result code if enabled is issued after the Error Control Report ER and before the final result code e g CONNECT De
88. n seconds for reacting to the DTR signal change The value 255 inhibits the signal change recognition See also the amp D command 4 2 2 amp S DSR signal behaviour The amp S command is ignored the DSR is always ON 4 2 3 amp K Select flow control no flow control AG hardware flow control RTS CTS AG software flow control XON XOFF Copyright O Nokia Mobile Phones 2001 All rights reserved 18 NOKIA List of AT Commands for Nokia 22 The amp K command changes the same setting as the IFC The use of IFC is recommended 5 GENERIC COMMANDS 5 1 V 25ter 5 1 1 Z Reset to default configuration reset to stored profile 0 reset to stored profile 1 The settings that are not stored in a profile refer to amp W will be reset to their factory defaults refer to amp F The implementation is according to GSM 07 07 section 5 7 5 1 2 SE Set to factory defined configuration Execute amp F 0 reset to factory defaults This command instructs the Nokia 22 to set default values to all parameters The command parameters that are reset to their factory defaults are S3 S4 S5 E Q V X amp C amp D IFC ILRR S25 amp S CSCS SO S7 S8 510 DS DR S2 S12 CSTA CMOD CBST CRLP CR CRC CSNS CREG COPS only lt format gt CLIP CLIR COLP CCWA only lt n gt CUSD only lt n gt CSSN CMER CPBS CMEE CSMS CPMS CMGF CSCA CSMP CSDH CSCB CNMI 5 1 3 Request identif
89. n the text mode CMGF 1 or integer type value that indicates the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length in the PDU mode CMGF 0 lt data gt SMS GSM 03 40 TP User Data in the text mode responses lt fo gt first octet of GSM 03 40 SMS DELIVER SMS SUBMIT SMS STATUS REPORT or SMS COMMAND in integer format lt mr gt GSM 03 40 TP Message Reference in integer format lt ra gt GSM 03 40 TP Recipient Address Address Value field in string format the type of address is given by lt tora gt Copyright Nokia Mobile Phones 2001 All rights reserved 67 NOKIA List of AT Commands for Nokia 22 lt dt gt GSM 03 40 TP Discharge Time in time string format yy MM dd hh mm ss zz lt st gt GSM 03 40 TP Status in integer format lt ct gt GSM 03 40 TP Command Type in integer format lt pdu gt GSM 04 11 SC address followed by GSM 03 40 TPDU in hexadecimal format 10 12 CMGR Read message CMGR text mode CMGF 1 SMS DELIVER lt index gt CMGR lt stat gt lt oa gt lt scts gt lt tooa gt lt fo gt lt pid gt lt dcs gt lt sca gt lt tosca gt lt length gt lt CR gt lt LF gt lt data gt text mode CMGF 1 SMS SUBMIT CMGR lt stat gt lt da gt lt toda gt lt fo gt lt pid gt lt dcs gt lt vp gt lt sca gt lt tosca gt lt length gt lt CR gt lt LF gt lt data gt text mode CMGF 1 SMS STATUS REPORT CMGR lt s
90. nnnnn 44 7 9 COWA GAME Fe 45 7 10 CUSD Unstructured supplementary service data 46 7 11 CSSN Supplementary service notifications ccc cette eee e ee eeeeeeeeeeeeteeeeneeeeeeeeeteeee 47 fe ACECO LISP GurrenibCalls ease ee ee eege Ee 47 7 18 CCUG Closed user group EE 48 7 14 CCFC Call Forwarding Number and Conditions errnnrrnnnnrnnnnnnnonnnnnnrnnnnnnrrnnnnrrrennnrrrnnnnnnn 49 7 15 CHLD Call related to SSSs cx auke erste eee 50 7 16 CAOC Advice of Charge EE 50 8 ME control and status commands GSM O 0D 51 8 1 CPWC ME power class ENEE eege Zeene Zeene zeen 51 8 2 4 GPAS Phone activity status mvanerdresduilvebedm ni hiejihkvme minut 52 8 3 CFUN Set phone functionality antas kassa aS 52 Say POP N TET d IA Aer 52 SB 050 Signalguality E 53 8 6 CPBS Select phonebook memory storage ENNEN 54 8 7 GPBF Find phonebook entries een dee ee ees eE 55 8 8 CPBW Write phonebook nft 201CNEKERSINNNEESRNEEENNENR EEN NENdENEEEENENEREEREEEEEE eee 56 8 9 FOND NAG ege ele EE 57 8 10 CMER ME event EENEG Eeer skada ear nes 57 9 ME error Erde deene 58 9 1 CMEE Report mobile equipment error ENNEN 58 10 SMS commands GSM 07 05 raven seende ceeneadchacieoesauery hd d dene aetiwhoneeved annan 59 10 1 CSMS Select message service ENEE 59 10 2 CPMS Preferred message storage ENEE 59 10 3 Ee EE ern E 60 10 4 CSCA Service centre address aa vvs gudene ke 60 10 5 CSMP Set text Mode p rameters ukunst vdeitbeedi 61 10 6 CSDH Show
91. of CNMI to zero PDU mode The CNMA command confirms the reception of a new message SMS DELIVER or SMS STATUS REPORT which is routed directly to the TE This acknowledgement command shall be used when the CSMS parameter lt service gt equals 1 In the PDU mode it is possible to send either a positive RP ACK or a negative RP ERROR acknowledgement to the network The parameter lt n gt defines which acknowledgement will be sent Optionally when lt length gt is greater than zero an acknowledgement TPDU SMS DELIVER REPORT for RP ACK or RP ERROR may be sent to the network The entering of the PDU is done similarly as specified in the command Send Message CMGS except that the format of lt ackpdu gt is used instead of lt pdu gt i e SMSC address field is not present The PDU shall not be bounded by double quotes The TA shall not send another CMT or CDS result code to the TE before the previous code is acknowledged If the Nokia 22 does not get an acknowledgement within the required time network timeout the ME should send an RP ERROR to the network The Nokia 22 shall automatically disable routing to the TE by setting both lt mt gt and lt ds gt values of the CNMI to zero The test command returns a list of supported lt n gt values If the only value that is supported is 0 the device does not support the sending of TPDU Defined values lt N gt 0 command operates as defined for the text mode 1 send RP ACK o
92. ol control Data bit order Phase C received EOL alignment Format conversion Buffer size 13 3 TIA SP 2388 FCLASS FMFR FMDL FREV D A FDT FET FDR FDCC FK FDIS FDCS FLID FCIG FLPL FSPL FCR FBUG FECM FPTS FCQ Select read or test Service Class Request manufacturer identification Request model identification Request product revision identification Originate a call Answer a Call Data transmission Transmit page punctuation Begin or continue phase C receive data Establish DCE capabilities Session termination Current session parameters Current session results Local ID string Local polling ID string Indicate document to poll Request to poll Capability to receive Session message reporting Error correction mode control Page transfer status Copy quality checking FBADMUL Error threshold multiplier FBADLIN Bad line threshold FPHCTO DTE phase C response timeout FAXERR T 30 session error report FCTCRTY ECM retry count FMINSP Minimum phase C speed Copyright Nokia Mobile Phones 2001 All rights reserved 79 NOKIA List of AT Commands for Nokia 22 FTBC FRBC FBOR FREL FVRFC FDFFC FLNFC FWDFC FAA FBUF 80 Phase C transmit data block size Phase C receive data block size Data bit order Phase C received EOL alignment Vertical resolution format conversion Data compression format conversion Page length format conversion Page width format conversio
93. ommands for Nokia 22 4 1 8 SC Circuit 109 received line signal detector behaviour amp C 0 801 The amp C command determines how the state of the circuit 109 relates to the detection of a received line signal from the distant end Changing the parameter will take effect immediately in both command and online command states In the amp C1 mode of operation the circuit 109 is on during the connection The circuit 109 is also known as a DCD or carrier signal 4 1 9 amp D Circuit 108 data terminal ready behaviour amp D1 DTR on gt off causes transition to on line command state if a call is in progress The amp D command determines how the DCE responds when the circuit 108 2 is changed from ON to OFF during the online data state The circuit 108 is also known as DTR signal 4 1 10 IPR Fixed DTE rate Command Response Default lIPR lt rate gt ST O o EE Set IPR 0 9600 14400 19200 28800 38400 57600 115200 The IPR command sets the data rate at which the DCE will accept commands The specified rate takes effect immediately following the issuance of the current command line NOTE The reset commands Z and amp F do not change this setting Defined values lt rate gt is the bit transmission rate in one second Copyright Nokia Mobile Phones 2001 All rights reserved 15 NOKIA List of AT Commands for Nokia 22 4 1 11 ICF DTE DCE character framing Command Response Default S
94. ons system GSM 900 MHz and DCS 1 800 MHz Copyright O Nokia Mobile Phones 2001 All rights reserved 96 NOKIA List of AT Commands for Nokia 22 17 EXAMPLE PROCEDURES ON SOME AT COMMANDS How to create a data call or send an SMS in text or PDU mode and how to also check the PIN code or signal quality 17 1 Inputting PIN CODE The password PIN security code etc status can be queried with the CPIN command If the response is READY no password is required If the response is SIM PIN the Nokia 22 is waiting for a PIN code It is possible that more than one password is needed The following example indicates how the PIN code is given to the Nokia 22 How to input PIN code Command from the DCE Response from Explanation the Nokia 22 AT CPIN lt CR gt Query about password status CPIN SIM PIN PIN code required OK Previous command was succesful AT CPIN 1234 Give PIN code 1234 to the Nokia 22 OK Previous command was succesful AT CPIN lt CR gt Query about the password status CPIN READY No password required OK Previous command was succesful How to check network registration signal quality AT CSQ lt CR gt Query signal strength CQ 31 99 Response CSQ lt crssi gt 99 Values for lt rssi gt 0 No network coverage Check PIN code 1 31 Signal strenght 17 2 Initialising the Nokia 22 Command from the DCE Response Exp
95. ory storage selected using the CPBS The entry fields written are phone number lt number gt in the format lt type gt and text lt text gt associated with the number If these fields are omitted the phonebook entry is deleted The test command returns the location range supported by the current storage as a compound value the maximum length of the lt number gt field the supported number formats of the storage and the maximum length of the lt text gt field In the case of a SIM storage the lengths may not be available Defined values lt index gt integer type values in the range of the location numbers of the phonebook memory lt number gt string type phone number of the format lt type gt lt type gt type of address octet in integer format refer GSM 04 08 10 5 4 7 The default value is 145 when dialling string includes the international access code character otherwise 129 129 unknown telephony 145 international telephony lt text gt string type field of the maximum length of the lt tlength gt lt nlength gt integer type value indicating the maximum length of the lt number gt field lt tlength gt integer type value indicating the maximum length of the lt text gt field Copyright Nokia Mobile Phones 2001 All rights reserved 57 NOKIA List of AT Commands for Nokia 22 8 9 CIND Indicator control Command Response cme error ee e OOOO EEE CIND lt ind gt lt ind gt X Dtp2
96. osed user group Command Response Default Pset__ ccuc lt n gt lt index gt lt info gt 000 ccuer fceue lt gt lt index gt lt inFo gt hoe PT Parameters lt N gt 0 disable CUG temporary mode 1 enable CUG temporary mode lt index gt 0 9 CUG index 10 no index preferred CUG taken from subscriber data lt info gt 0 no information 1 suppress OA 2 suppress preferential CUG 3 suppress OA and preferential CUG CCFC call forwarding number and conditions Copyright Nokia Mobile Phones 2001 All rights reserved 49 NOKIA List of AT Commands for Nokia 22 7 14 CCFC Call Forwarding Number and Conditions Command Response deig some error Execute CCFC lt reason gt when lt mode gt 2 rer lt mode gt lt number gt CCFC lt status gt lt classl gt lt number gt lt type gt 129 145 7 lt subaddr gt lt satype gt lt time gt 128 20 lt type gt lt class gt lt CR gt lt LF gt CCFC lt subaddr gt lt status gt lt class2 gt lt number gt lt satype gt lt type gt lt subaddr gt lt satype gt lt time gt lt time gt E 10 5 DEER EE This command controls call forwarding supplementary services The lt reason gt values 4 and 5 are only applicable for lt mode gt 0 When the status request response from network indicates that the SS is active for specific data bearer services e g circuit async the AT interface shall only in
97. r buffered result code received correctly 2 send RP ERROR if PDU is not given the Nokia 22 shall send an SMS Copyright Nokia Mobile Phones 2001 All rights reserved 70 NOKIA List of AT Commands for Nokia 22 DELIVER REPORT with a GSM 03 40 TP FCS value set to FF unspecified error cause lt length gt the length of the actual TP data unit in octets i e the RP layer SMSC address octets are not counted in the length 10 14 CMGS Send message Command Response cms error Text mode CMGF 1 text mode CMGF 1 and sending text mode CMGS SE SE ok 129 145 text is entered lt ctrl Z ESC gt CMGS lt mr gt lt scis gt PDU mode CMGF 0 PDU mode CMGF 0 and sending CMGS lt length gt lt CR gt ok PDU is given lt ctrl Z ESC gt CMGS lt mr gt lt ackpdu gt Text mode The CMGS command sends message to the network SMS SUBMIT The message reference value lt mr gt is returned to the TE when a message is successfully delivered Optionally when CSMS lt service gt value is 1 and the network supports lt scts gt is returned Values can be used to identify a message upon unsolicited delivery status report result code PDU mode The CMGS command sends a message from a TE to the network SMS SUBMIT The message reference value lt mr gt is returned to the TE when a message is successfully delivered Optionally when CSMS lt service gt value is 1 and the network supports lt ackpdu gt is
98. r gt lt type gt Given when COLP 1 and number received from the network when MO call established The COLP intermediate result code is given after the possible CSSI result code This result code is enabled and disabled with the COLP command Defined values lt number gt string type phone number of the format specified by lt type gt lt type gt type of address octet in integer format refer GSM 04 08 subclause 10 5 4 7 129 unknown telephony 145 international telephony Copyright O Nokia Mobile Phones 2001 All rights reserved 83 NOKIA List of AT Commands for Nokia 22 14 3 3 CR Data service report Format Description S CR REL given when CR 1 and data call established informs about the type of data call being ASYNC established The CR intermediate result code is given after a possible COLP result code during a MO data call setup During a MT data call setup this is the first intermediate result code Note that this result code shall replace the CARRIER result code when X5 is set This result code is enabled and disabled with the CR command 14 3 4 CRING Distinctive ring Format Description CRING lt type gt Given when CRC 1 and incoming MT call no active or held calls in ME This result code is enabled and disabled with the CRC command NOTE CRING replaces the V 25ter RING result code Defined values lt type gt FAX facsimile TS 62 VOICE normal voice TS 11 REL ASYNC normal dat
99. rectly to the TE when CNMI 2 in the on line data state indications are buffered into the Nokia 22 in the command mode forwarded directly to the TE Defined values lt mem gt memory to which the received SMs are preferred to be stored SM SIM message storage lt index gt integer type the location of the message in the defined memory 14 4 5 CDS New SMS STATUS REPORT text mode when CNMI 0 routed messages are buffered into the Nokia 22 if CDS lt fo gt lt mr gt lt ra gt lt tora gt buffer is full memory capacity exceeded is sent to the network lt scts gt lt dt gt lt st gt when CNMI 1 in the on line data state the routed messages are PDU mode rejected e g memory capacity exceeded is sent to the network and CDS lt length gt lt CR gt lt LF gt lt pdu gt when the command mode is entered memory available is sent to network in the command mode they are forwarded directly to the TE when CNMI 2 in the on line data state routed messages are buffered into the Nokia 22 if the buffer is full memory capacity exceeded is sent to the network and when the command mode is entered memory available is sent to network in the command mode they are forwarded directly to the TE See also the CNMA command Defined values lt fo gt first octet of GSM 03 40 SMS STATUS REPORT in integer format lt mr gt GSM 03 40 TP Message Reference in integer format lt ra gt GSM 03 40
100. rent services each MSISDN is returned on a different line Defined values lt alphax gt optional alphanumeric string associated with lt numberx gt lt numberx gt string type phone number of a format specified by lt typex gt lt typex gt type of address octet in integer format refer GSM 04 08 10 5 4 7 145 international telephony 129 unknown telephony 7 2 CREG Network registration Command Response cme error Set CREG lt n gt CREG CREG lt n gt lt stat gt lt lac gt lt ci gt a x O CREG CREG 0 2 se The CREG command controls the presentation of the unsolicited result code CREG lt stat gt when lt n gt 1 and the ME network registration status changes or the code CREG lt stat gt lt lac gt lt ci gt when lt n gt 2 and the network cell changes The read command returns the status of a result code presentation and an integer lt stat gt which shows whether the network has currently indicated the registration of the ME The location information elements lt lac gt and lt ci gt are returned only when lt n gt 2 and the ME is registered in the network Defined values lt n gt Copyright Nokia Mobile Phones 2001 All rights reserved 39 NOKIA List of AT Commands for Nokia 22 0 disable network registration unsolicited result code 1 enable network registration unsolicited result code CREG lt stat gt 2 enable network registration and location information unsoli
101. s 193 in decimal lt ci gt string type two byte cell ID in hexadecimal format 14 3 9 CUSD Network initiated unstructured supplementary service data CUSD lt m gt lt str gt lt dcs gt given when CUSD 1 and network initiated notify or request USSD message received discarded if in the on line data state This result code is enabled and disabled with the CUSD command NOTE only the first request message during a network initiated USSD session yields to the CUSD unsolicited result code The rest are information responses of the CUSD command Defined values lt m gt 0 no further user action required network initiated USSD Notify or no further information needed after mobile initiated operation 1 further user action required network initiated USSD Request or further information needed after mobile initiated operation Copyright Nokia Mobile Phones 2001 All rights reserved 87 NOKIA List of AT Commands for Nokia 22 lt str gt string type USSD string when lt str gt parameter is not given network is not interrogated if lt dcs gt indicates that GSM 03 38 default alphabet is used if the TE character set is other than HEX refer to the Select TE command Character Set CSCS the Nokia 22 converts the GSM alphabet into current TE character set according to the rules of GSM 07 05 Annex A if the TE character set is HEX the Nokia 22 converts each 7 bit character of the
102. s reserved 52 NOKIA List of AT Commands for Nokia 22 8 2 CPAS Phone activity status Execute CPAS CPAS lt pas gt CPAS CPAS 0 1 3 4 The CPAS command returns the activity status lt pas gt of the ME It can be used to interrogate the ME before requesting action from the phone The test command returns the supported values Defined values lt pas gt 0 ready 1 unavailable This value is never reported 3 ringing 4 call in progress 8 3 CFUN Set phone functionality Command Response cme et Set CFUN lt fun gt 0 CFUN CFUN lt fun gt ooa ee CFUN CFUN 0 1 0 ee The CFUN command selects the level of functionality lt fun gt of the Nokia 22 It can be used to stop the use of the Nokia 22 in a controlled manner After lt fun gt 0 it is not possible to communicate with the Nokia 22 but the device has to be hardware reset to establish communication The test command returns supported values Defined values lt fun gt 0 minimum functionality 1 full functionality this setting is ignored 8 4 CPIN Enter PIN Command Response cme em Set CPIN lt pin gt lt newpin gt CPIN CPIN lt code gt BE EE CPIN EE KE Copyright O Nokia Mobile Phones 2001 All rights reserved NOKIA 53 List of AT Commands for Nokia 22 The CPIN command sends a password to the Nokia 22 that is required for the operating the Nokia 22 SIM PIN SIM PUK PH SIM PIN
103. se communication 9 call hold retrieve swap build split transfer deflection failed or cannot be actioned 1 0 manual network selection is not possible because unavailable or forbidden network name was given or call is active 11 invalid password was given 12 SIM PUK2 required to execute the AT command 13 there is no network service to complete the request 14 supplementary service command failed due to an unknown error i e an error that is not covered by other lt err gt values 15 AT interpreter does not support the operation 16 SIM PIN2 required to execute the AT command 17 alpha entry to be stored is too long 18 number to be read stored is too long 19 number to be stored contains characters that are not available in that memory 20 SIM interface control is not reserved or the maximum number of applications has reserved the SIM control 22 external ME Ul cannot be accessed 23 network timeout 24 entries cannot be stored in the currently selected phone book memory e g on missed calls list 25 there is no active voice call 15 2 CMS ERROR values The columns in the following table indicate the SMS AT commands that can return the lt err gt value given in the topmost row The numbers in the cells indicate the error that can generate the lt err gt value The meaning of the numbers is given under the table For details on how to read the table see the example in the previous section Table 6 CMS error values Copyright
104. st of AT Commands for Nokia 22 Defined values dir The desired direction s of the operation of the data compression function from the DTE s point of view Negotiated no compression Transmit only Receive only Both directions accept any direction OM OH neg specifies whether the DCE should continue to operate if the desired result is not obtained CH Do not disconnect if Rec V 42 bis is not negotiated by the remote DCE as specified in lt dir gt Disconnect if Rec V 42 bis is not negotiated by the remote DCE as specified in lt dir gt P1 the maximum number of dictionary entries which should be negotiated P2 the maximum string length to be negotiated 6 1 15 DR Data compression reporting Command Response Default Set DR lt mode gt 0 Read DR DR lt mode gt DR 0 1 DS The DR command controls the presentation of the DR intermediate result code Defined values lt mode gt data compression reporting 0 disabled 1 enabled i e DR result code transmitted 6 2 De facto 6 2 1 BCCITT Bell mode Execute B 0 B1 The B command is ignored Copyright Nokia Mobile Phones 2001 All rights reserved 28 NOKIA List of AT Commands for Nokia 22 6 2 2 S1 Ring count lt n gt 000 255 The S1 command returns the number of rings RING or CRING result codes counted after the last MT call setup 6 2 3 52 Escape code character Set S2 lt n gt 10 127
105. t OE ice CCWA CCWA 0 1 ie The CCWA command allows the controlling of the Call Waiting supplementary service according to GSM 02 83 Activation deactivation and status query are supported When querying the status of a network service lt mode gt 2 the response line for the not active case lt status gt 0 should be returned only if the service is not active for any lt class gt The parameter lt n gt is used to disable and enable the presentation of an unsolicited result code CCWA lt number gt lt type gt lt class gt when the call waiting service is enabled The interaction of this command with other commands based on other GSM supplementary service is described in the GSM standard The test command returns the supported values Defined values lt n gt sets shows the result code presentation status 0 disable 1 enable lt mode gt when not given the network is not interrogated 0 disable 1 enable 2 query status lt classx gt is a sum of integers each representing a class of information the default value 7 equals all classes 1 voice telephony 2 data usually refers to all bearer services with lt mode gt 2 this may only refer to some bearer services 4 fax facsimile services lt status gt 0 not active 1 active lt number gt string type phone number of a calling address in the format specified by lt type gt Copyright Nokia Mobile Phones 2001 All rights reserved 46
106. t characters that in decimals are 3 47 and 230 no conversions of the original ME character set shall be done IRA International reference alphabet ITU T T 50 PCCP437 PC character set Code Page 437 PCDN PC Danish Norwegian character set 8859 7 ISO 8859 Latin 1 character set Copyright Nokia Mobile Phones 2001 All rights reserved 21 NOKIA List of AT Commands for Nokia 22 5 3 6 WS46 Select wireless network Response WS46 12 Set WS46 WS46 2 The WS46 command can be used to set and query a selected or supported wireless network Only the value 12 GSM digital cellular is supported Copyright Nokia Mobile Phones 2001 All rights reserved 22 NOKIA List of AT Commands for Nokia 22 6 CALL CONTROL COMMANDS 6 1 V 25ter 6 1 1 D Dial Command Possible Numeri Description verbose result c VO codes V1 Execute D lt dial string gt BLACKLISTED Call to the number is forbidden until manual reset BUSY Called party is busy ee EG Data fax call established rate 300 bps or X forbids rate display CONNECT 1200 Data fax call established rate 1200 bps CONNECT 2400 Data fax call established rate 2400 bps CONNECT 4800 Data fax call established rate 4800 bps CONNECT 9600 12 Data fax call established rate 9600 bps CONNECT 14400 17 Data call established rate 14400 bps CONNECT 28800 Data call established rate 28800 bps CONNECT 38400 20 Data call established rate
107. t indexn gt the phone number stored there lt number gt of the format lt type gt and text lt text gt associated with the number If the searched text is not found in the entries in the current memory the response is empty The test command returns the maximum lengths of the lt number gt and lt text gt fields In the case of a SIM storage the lengths may not be available Defined values lt index1 gt lt index2 gt integer type values in the range of location numbers of the phonebook memory lt number gt string type phone number of the format lt type gt lt type gt type of address octet in integer format refer GSM 04 08 10 5 4 7 129 unknown telephony 145 international telephony lt findtext gt lt text gt string type field of the maximum length of lt tlength gt Copyright Nokia Mobile Phones 2001 All rights reserved 56 NOKIA List of AT Commands for Nokia 22 lt nlength gt integer type value indicating the maximum length of the lt number gt field lt tlength gt integer type value indicating the maximum length of the lt text gt field 8 8 CPBW Write phonebook entry Command Response cme error CPBW lt index gt lt number gt 129 145 lt type gt lt text gt Test CPBW CPBW lt index gt list lt nlength gt ae 129 145 lt tlength gt Execute The CPBW command writes a phonebook entry in the location number lt index gt in the current phonebook mem
108. t memx gt lt totalx gt integer type the total number of message locations in lt memx gt 10 3 CMGF Message format Command Response Default Set CMGF lt mode gt 0 CMGF lt mode gt CMGF lt mode gt CMGF 0 1 me The CMGF command tells the Nokia 22 the input and output format of messages to be used lt mode gt indicates the format of the messages used with the send list read and write commands and the unsolicited result codes resulting from the received messages The mode can be either the PDU mode entire TP data units used or the text mode headers and body of the messages given as separate parameters The text mode uses the character set specified by the command Select TE Character Set CSCS to be used in the message body The test command returns the supported modes as a compound value Defined values lt mode gt 0 PDU mode 1 text mode 10 4 CSCA Service centre address Command Response Default Set CSCA lt sca gt lt tosca gt 129 e Read CSCA CSCA lt sca gt lt tosca gt Test CSCA 01 o Copyright Nokia Mobile Phones 2001 All rights reserved 61 NOKIA List of AT Commands for Nokia 22 The CSCA command updates the SMSC address through which mobile originated SMs are transmitted In the text mode the setting is used by the send and write commands In the PDU mode the setting is used by the same commands but only when the length of the SMSC a
109. tat gt lt fo gt lt mr gt lt ra gt lt tora gt lt scts gt lt dt gt lt st gt text mode CMGF 1 SMS COMMAND CMGR lt stat gt lt fo gt lt ct gt lt pid gt lt mn gt lt da gt lt toda gt lt length gt lt CR gt lt LF gt lt cdata gt PDU mode CMGF 0 CMGR lt stat gt lt length gt lt CR gt lt LF gt lt pdu gt CMGR Text mode The CMGR command returns a message with the location value lt index gt from the message storage If the status of the message is received unread the status in the storage changes to received read PDU mode The CMGR command returns a message with the location value lt index gt from the preferred message storage to the TE The status of the message and the entire message data unit lt pdu gt is returned If the status of the message is received unread the status in the storage changes to received read Defined values lt index gt integer type value in the range of the location numbers lt stat gt integer type in the PDU mode default 0 or string type in the text mode indicates the status of the message in the memory REC UNREAD received unread message i e new message REC READ received read message STO UNSENT stored unsent message only applicable to SMs STO SENT stored sent message only applicable to SMs ALL all messages only applicable to the CMGL command RONDO Copyright Nokia Mobile Phones 2001 All
110. text mode parameters ENNEN 61 10 7 CSCB Select cell broadcast message types AEN 62 ele SS Ae ccs ae a I Sa ae ate ad he ce ce Ne a Oa Ya 62 10 9 GRESS e e E 63 10 10 CNMI New message indications to TE 63 1011 GMGL RT dente EE 65 10 12 CMGR Read message uante 67 10 13 CNMA New message acknowledgement to MEITA 69 10 14 CMGS Send message EE 70 10 15 CMSS Send message from storage ENEE 71 10 16 CMMS More messages to send eagfeieeieredee e ekeie tee nate nodes Debatte de ise 72 10 17 CMGW Write message to Memory EEN 73 10 18 CMGD Delete message unndra dekt snseepeh dandeetsetereelidavenecseiereest 74 10 19 CMGC Send command anse NR 74 11 Nei E 76 ha WE A TS DIME QOneraliOn E 76 12 Miscellaneous COMMands uvante Peers 77 EE SE eene EN EE TEE ele 77 12 1 1 A Repeat last command line uuvrvom amnesi doesn ankle etg 77 Copyright Nokia Mobile Phones 2001 All rights reserved NOKIA List of AT Commands for Nokia 22 12 1 2 S47 Force fax class 2 2 0 error correction mode rarrnnrrrnnnvrrrnnnnnnnnnnrnnnrrrrnnnnrnrnrrrnnnnnn 77 13 Fax COMMANdS EE 78 18 51 Oe Ge ee 78 Een EE 78 e Wee we 79 14 RESU ele EE 81 21 NPD Geddes 81 14 1 1 Basic syntax result C0des EE 81 14 1 2 DR Data compression report ENEE NENENNEEEEREE ENGER NEEN NENNEN 81 14 1 3 ILRR DTE DCE local rate report Ak 81 142 Dei ae EET 82 14 2 1 Call repeat restriction result codes kee 82 123 GINO TOT ices hdc red tate at ced t ecru eae tae Tee Saale ael ee 82 1
111. th gt lt CR gt sending ok PDU is given lt ctrl Z ESC gt CMGC lt mr gt lt ackpdu gt CMGC Text mode The CMGC command sends a command message from a TE to the network SMS COMMAND The entering of text GSM 03 40 TP Command Data is done as specified in the command Send Message CMGS but the format is fixed to be a sequence of two IRA character long hexadecimal numbers which Nokia 22 converts into 8 bit octets The message reference value lt mr gt is returned to the TE when a message is successfully delivered Optionally when CSMS lt service gt value is 1 and network supports lt scts gt is returned Values can be used to identify a message upon an unsolicited delivery status report result code PDU mode The CMGC command sends a command message from a TE to the network SMS COMMAND The message reference value lt mr gt is returned to the TE on a successful message delivery Optionally when CSMS lt service gt value is 1 and the network supports lt ackpdu gt is returned Values can be used to identify a message upon an unsolicited delivery status report result code Text PDU entering is as specified in ETSI GSM 07 05 If the SMSC address is not set restored during the current session i e CSCA returns CSCA 129 it must automatically be read from Copyright Nokia Mobile Phones 2001 All rights reserved 75 NOKIA List of AT Commands for Nokia 22 the SIM ME location 1 In the PDU mode all
112. urns the supported modes as a compound value Defined values lt mode gt 0 message types specified in lt mids gt and lt dcss gt are accepted 1 message types specified in lt mids gt and lt dcss gt are not accepted lt mids gt string type all the possible combinations of GSM 03 41 CBM message identifiers e g 0 1 5 320 478 922 lt dcss gt string type all the possible combinations of 03 38 CBM data coding schemes e g 0 3 5 10 8 CSAS Save settings EE error Execute CSAS lt profile gt pp Jx CSAS CSAS 0 1 mw E a Copyright Nokia Mobile Phones 2001 All rights reserved 63 NOKIA List of AT Commands for Nokia 22 The CSAS command saves active message service settings to a non volatile memory The settings specified in the commands Service Centre Address CSCA Set Message Parameters CSMP and Select Cell Broadcast Message Types CSCB are saved The SMSC address is not stored if CSCA is not set restored during the current session i e CSCA returns CSCA 129 The protocol id lt pid gt data coding scheme lt dcs gt and validity period lt vp gt are not stored if the CSMP parameter lt fo gt does not indicate SMS SUBMIT i e bits 1 0 are not 01 In addition the validity period is not stored if lt fo gt does not indicate the relative validity period format i e bits 4 3 are not 10 The destination address or alpha tag cannot be stored through an AT inter
113. v3 CDS1 2 CIND message 0 1 call 0 1 roam 0 1 smsfull 0 1 Nokia 22 CIND message 0 1 call 0 1 roam 0 1 smsfull 0 1 signal 0 5 Optional See ETSI GSM 07 07 2 section 8 9 Queries the current status of the ME physical indicators 8 10 CMER ME event reporting Command Response Default some error CMER lt mode gt lt keyp gt lt disp gt lt ind gt 0 Dip2v3 CDS1 2 CMER 2 0 2 0 0 1 0 Nokia 22 1 0 CMER Nokia 22 CMER 2 Mandatory when any of the CKEV CDEV or CIEV result codes are implemented See ETSI GSM 07 07 2 section 8 10 Enables disables the presentation of the keypad display and indicator unsolicited result codes Copyright Nokia Mobile Phones 2001 All rights reserved 58 NOKIA List of AT Commands for Nokia 22 9 ME ERROR COMMAND GSM 07 07 9 1 CMEE Report mobile equipment error Command Set CMEE lt n gt jr de CMEE CMEE lt n gt CMEE CMEE 0 2 The CMEE command disables or enables the use of the result code CME ERROR lt err gt as an indication of an error relating to the functionality of the Nokia 22 When enabled the ME related errors cause the CME ERROR lt err gt final result code instead of the regular ERROR final result code ERROR is returned normally when an error is related to the syntax or invalid parameters
114. values 1 5 10 12 23 The corresponding errors are external ME is not connected to TA phone security code required to execute the AT command ME does not have a SIM connected to it SIM PIN required to execute the AT command SIM PUK required to execute the AT command TAs eae ell ela ee lel a oo E Femme EE EE EE EE EE E EE D EE E EE EE EES EN GE E DEE E EE EE EE WEN EE EE EEN E EE E D ee Be a a E E ENE EN EEE ENEE EE El RTE E Se et Ke N w OD OOO 4 8 PPT Rz DO N DID OO w Gol A Q E Q oO COPS COPS COPS CLCK CPWD CCWA CUSD EE ii JERN ET NM E EE EH i E E SS SN Ne E GPINs EN E al Ges a feet ee a ICEN Ze SE e EE DE EE E E TT EE IPES E E FE EE E E pee Oe ER EEN EE E E E EI le fOPBRE ER D E A E E E E E e EE EE e e ere en EE SE z E EE NR EE EE E BE RE E EE eee phone security code required to execute the AT command ME does not have a SIM connected to it SIM PIN required to execute the AT command SIM PUK required to execute the AT command 2 3 Ne CSQ N oo N N w j Go R Po CH CPBW AON Copyright Nokia Mobile Phones 2001 All rights reserved 93 NOKIA List of AT Commands for Nokia 22 5 memory location does not exist 6 phonebook memory location is empty 7 match in searched string is not found in any of the memory locations 8 general memory error e g problems in SIM databa
115. with the location value lt index gt from a preferred message storage lt mem2 gt to the network SMS SUBMIT or SMS COMMAND If a new recipient address lt da gt is given for the SMS SUBMIT it shall be used instead of the one stored with the message The reference value lt mr gt is returned to the TE on a successful message delivery Optionally when CSMS lt service gt value is 1 and network supports lt scts gt is returned Values can be used to identify a message upon an unsolicited delivery status report result code PDU mode The CMSS command sends a message with the location value lt index gt from a message storage lt mem2 gt to the network SMS SUBMIT or SMS COMMAND If the new recipient address lt da gt is given for the SMS SUBMIT it shall be used instead of the one stored with the message The reference value lt mr gt is returned to the TE when a message is successfully delivered Optionally when CSMS lt service gt value is 1 and network supports lt ackpdu gt is returned Values can be used to identify a message upon an unsolicited delivery status report result code Defined values lt index gt integer type a value in the range of the location numbers supported by the associated memory lt da gt GSM 03 40 TP Destination Address Address Value field in string format type of address given by lt toda gt lt toda gt GSM 04 11 TP Destination Address Type of Address octet in integer format 129 unknown telep

Nokia 9356900 issue 1 Telephone User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents