Home

Nokia 5700 Cell Phone User Manual

1. Loudspeaker 2 Earpiece 3 Volume keys 4 Left and right selection keys 5 Menu key 6 hereafter described as select Menu Clear key 7 Call key 8 End key 9 Navi scroll key 10 hereafter referred to as scroll key Number keys 11 VWDION Microphone 12 Nokia AV 2 5 mm connector 13 Loudspeaker 14 Charger connector 15 microSD card slot 16 USB connector 17 Infrared port 18 14 Media keys Rewind zoom out 19 Play Pause Stop capture key 20 Fast forward zoom in 21 Camera lens 22 Camera flash 23 E Modes Your phone has five functional modes phone mode 1 camera mode 2 music mode 3 video call mode 4 and video view mode 5 To switch between the modes turn the lower part of the phone There is a short pause before a mode is activated In the phone mode do not try to rotate the lower part of the phone more than 90 degrees to the left or 180 degrees to the right If you force the lower part of the phone to rotate more the phone will be damaged Phone mode The phone mode is activated when the number keys of the lower part are on the same side as the display Camera mode To activate the camera mode while in the phone mode turn the lower part of the phone 90 degrees to the left so that the camera lens is pointing away from you when you look at the display To take a self portrait turn the lower part of the phone
2. Your service provider may have requested that certain features be disabled or not activated in your device If so these features will not appear on your device menu Your device may also have a special configuration such as changes in menu names menu order and icons Contact your service provider for more information This device supports WAP 2 0 protocols HTTP and SSL that run on TCP IP protocols Some features of this device such as web browsing e mail push to talk instant messaging and multimedia messaging require network support for these technologies E Enhancements batteries and chargers Check the model number of any charger before use with this device This device is intended for use when supplied with power from the AC 3 AC 4 AC 5 DC 4 chargers or CA 44 charger adapter Warning Use only batteries chargers and enhancements approved by Nokia for le use with this particular model The use of any other types may invalidate any approval or warranty and may be dangerous For availability of approved enhancements please check with your dealer When you disconnect the power cord of any enhancement grasp and pull the plug not the cord General information E Access codes Lock code The lock code 5 digits helps to protect your phone against unauthorized use The preset code is 12345 Change the code and keep the new code secret and in a safe place separate from your phone To change the code and to set the phone
3. Call barring and call diverting cannot be active at the same time Call barring Call barring network service allows you to restrict the calls that you make and receive with your phone To change the settings you need the barring password from your service provider Scroll to the desired barring option and to request the network to set call restriction on select Options gt Activate To set the selected call restriction off select Cancel To check whether the calls are barred select Check status To change the barring password select Edit barring password To cancel all active call barrings select Cancel all barrings Call barring and call diverting cannot be active at the same time When calls are barred calls may be possible to certain official emergency numbers Network Network mode To select which network to use shown only if supported by the service provider If you select Dual mode the device uses the GSM or UMTS network automatically according to the network parameters and the roaming agreements between the network operators Operator selection To set the phone to search for and select automatically one of the available networks select Automatic To select the desired network manually from a list of networks select Manual If the connection to the manually selected network is lost the phone sounds an error tone and asks you to select a network again The selected network must have a roaming agreement with your
4. to view a list of available topics in the appropriate category Help category list to view a list of help categories Search by keyword to search for help topics using keywords To open help from the main menu select Menu gt Applications gt Help In the list of help categories select the desired application to view a list of help topics To switch between the help category list indicated with y and a keywords list indicated with 1 abc scroll left or right To display the related help text select it E Volume control To adjust the earpiece or loudspeaker volume during a call or when listening to an audio file press the volume keys To activate the loudspeaker during a call select Loudspeaker To deactivate the loudspeaker during a call select Handset Warning Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud WE Keypad lock keyguard To prevent accidental keypresses you can lock the keypad To lock the keypad in the phone mode press the left selection key and within 1 5 seconds To set the phone to automatically lock the keypad after a certain time select Menu gt Settings gt Phone sett gt General gt Security gt Phone and SIM card gt Keypad autolock period gt User defined and the desired time To lock the keypad in music mode press the power key quickly and select Lock keypad To unlock the keypad in the phone mode select Unlock a
5. Personalisation Select Display Standby mode Tones Language Themes or Voice comms Display Light sensor to adjust the light sensor that observes the lighting conditions and adjusts the brightness of the display Font size to select the font size used in lists and editors Power saver time out to set the time out period after which the power saver is activated Welcome note ogo to set the welcome note or logo which is displayed briefly each time you switch on the phone Light time out to set the time out for the display light Standby mode Active standby to enable or disable active standby See Active standby p 16 Shortcuts to assign shortcuts for the right and left selection keys scrolling in different directions or pressing the scroll key in the standby mode The scroll key shortcuts are not available if Active standby is On Active standby apps to select the application shortcuts to appear in the active standby This setting is available only if Active standby is set to On 72 Operator logo this setting is visible only if you have received and saved an operator logo You can select whether the operator logo is shown Tones Change the tones of the clock calendar and currently active profile See Profiles p 59 Language Phone language to change the language for the display texts in your phone This change may also affect the format used for date and time and the separators used
6. Voice commands Call mailbox Speed dial Phone settings 15 Connectivity seeeeesseeteeseeeeeereeeee 84 PC Suites aovecneen eas Bluetooth connection Connection managev PushittotalK cs iasi iaip Remote synchronization Infrared 16 Data Manager ssssessceseeseeeeees 95 Application manager File managev Device manager Memory card Activation keys 17 Battery information Charging and discharging Nokia battery authentication QuidelineS tas ced ee 101 18 Enhancements ssssesseeeeeee 102 Care and maintenance 102 Additional safety information eeeseeseeneeeseeseeteeeneees 103 For your safety Read these simple guidelines Not following them may be dangerous or illegal Read the complete user guide for further information PEPE PPB 5 SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger ROAD SAFETY COMES FIRST Obey all local laws Always keep your hands free to operate the vehicle while driving Your first consideration while driving should be road safety INTERFERENCE All wireless devices may be susceptible to interference which could affect performance SWITCH OFF IN HOSPITALS Follow any restrictions Switch the device off near medical equipment SWITCH OFF IN AIRCRAFT Follow any restrictions Wireless devices can cause interference in aircraft SWITCH OFF WHEN REFUELING Do no
7. and select OK 2 Select the first Unit field the unit from which you want to convert and OK 3 Select the next Unit field and the unit to which you want to convert 4 Inthe first Amount field enter the value to be converted The other Amount field changes automatically to show the converted value Press to add a decimal and press for the for temperature and E exponent symbols The conversion order changes if you write a value in the second Amount field The result is shown in the first Amount field 69 13 Applications H Download Download network service is a mobile content shop available on your device You may be able to download some content free of charge With Download you can discover preview buy download and upgrade content services and applications The items are categorized under catalogs and folders provided by different service providers The available content depends on your service provider Select Menu gt Applications gt Download Download uses your network services to access the most up to date content For information on additional items available through Down oad contact your service provider or the supplier or manufacturer of the item E My own To access the applications you have downloaded in your phone select Menu gt Applications gt My own GPS data This feature is not designed to support positioning requests for related calls Contact your service provide
8. press and hold the right selection key To change the profile press the power key and select a profile To start a connection to the web press and hold O Active standby When active standby is enabled you can use the display for fast access to frequently used applications To select whether the active standby is shown select 16 Menu gt Settings gt Phone sett gt General gt Personalisation gt Standby mode gt Active standby gt On or Off To access active standby applications scroll to the application and select it In active standby the default applications are shown across the top of the active standby area and calendar to do and player events are listed below To select an application or event scroll to it and select it Offline profile The Offline profile lets you use the phone without connecting it to a network When the Offline profile is active the connection to the wireless network is turned off as indicated by in the signal strength indicator area All wireless RF signals to or from your phone are prevented and you can use your device without a U SIM card Use the offline profile in radio sensitive environments on board aircraft or in hospitals You can listen to music using the music player when the offline profile is active To leave the Offline profile press the power key and select another profile eX Important In the offline profile you cannot make or receive any calls or use other
9. scroll to a certificate and select Options gt Certificate details While opening the certificate details the phone checks the validity of the certificate and one of the following notes may appear Expired certificate The validity period has ended for the selected certificate Certificate not valid yet The validity period has not yet begun for the selected certificate Certificate corrupted The certificate cannot be used Contact the certificate issuer Certificate not trusted You have not set any application to use the certificate Change the trust settings Before changing any certificate settings you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner Scroll to an authority certificate and select Options gt Trust settings Depending on the certificate a list of the applications that can use the selected certificate is shown Security module View or edit security modules Factory settings Reset some of the settings to their original values You need the lock code See Lock code p 8 Positioning With the positioning service you can receive information from service providers about local issues such as weather and traffic conditions based on the location of your device network service To enable a positioning method select Positioning methods scroll to the positioning method and select Options gt Enable To stop using it selec
10. Assign 40 To copy names and numbers from a SIM card to your phone select Options gt S M contacts gt SIM directory Scroll to the name you want to copy or mark the desired names and select Options gt Copy to Contacts To copy a phone fax or pager number from contacts to your SIM card scroll to the contact you want to copy and select Options gt Copy gt To SIM directory To view the list of fixed dialing numbers select Options gt SIM contacts gt Fixed dial contacts This setting is only shown if supported by your SIM card When fixed dialing is activated calls may be possible to the official emergency number programmed into your device E Manage contact groups Create a contact group so that you can send text or e mail messages to several recipients at the same time 1 Select Menu gt Contacts 2 Scroll to the right and select Options gt New group 3 Enter a name for the group and select the group 4 Select Options gt Add members 5 Mark the contacts you want to add to the group and select OK E Add a ringing tone You can set a ringing tone also a video ringing tone for each contact and group 1 Select Menu gt Contacts 2 To add a ringing tone to a contact select the contact Options gt Ringing tone and the desired ringing tone To add a ringing tone to a group scroll right to the groups list and scroll to a contact group Select Options gt Ringing tone and the ringing tone for t
11. If the device has been locked enter the lock code to unlock it first Send data There can be only one active Bluetooth connection at a time 1 Open an application where the item you wish to send is saved 85 2 Scroll to the item you want to send and select Options gt Send gt Via Bluetooth 3 The phone starts to search for devices within range Paired devices are shown with 3 When searching for devices some devices may show only the unique device addresses To find out the unique address of your phone enter the code 2820 in the standby mode If you have searched for devices earlier a list of the devices that were found previously is shown first To start a new search select More devices If you switch off the phone the list of devices is cleared and the device search needs to be started again before sending data 4 Select the device with which you want to connect 5 Pair the devices e If the other device requires pairing before data can be transmitted a tone sounds and you are asked to enter a passcode e Create your own passcode 1 16 digits and agree with the owner of the other device to use the same code You do not have to memorize the passcode e After pairing the device is saved to the Paired devices view 6 When the connection has been successfully established the note Sending data is displayed Data received using Bluetooth connection can be found in nbox in Messaging Paired devices vi
12. Options gt Create new group Enter the settings for the group Restrict access to an IM group To create a closed IM group create a group members list Only the users on the list are allowed to join the group Select the M groups view scroll to the group and select Options gt Group gt Settings gt Group members gt Selected only 15 Connectivity E PC Suite You can use your phone with a variety of PC connectivity and data communication applications With PC Suite you can synchronize contacts calendar and to do notes and notes between your phone and a compatible PC You may find more information about PC Suite and the download link in the support area on the Nokia website www nokia com pcsuite E Bluetooth connection Bluetooth technology enables wireless connections between electronic devices within a maximum range of 10 meters 33 feet A Bluetooth connection can be 84 used to send images videos text business cards calendar notes or to connect wirelessly to compatible devices using Bluetooth technology such as computers This device is compliant with Bluetooth Specification 2 0 supporting the following profiles Dial Up Networking Serial Port File Transfer Handsfree Headset Basic Imaging SIM Access Generic Access and Advanced Audio Distribution To ensure interoperability between other devices supporting Bluetooth technology use Nokia approved enhancements for this model Check with the manufacturers of
13. PTT call select Disconnect or if there are several PTT calls select Options gt Disconnect Answer a PTT call If Accepted list calls is set to Notifyin Usersettings a short tone notifies you of an incoming call To accept the call select Accept To silence the tone select Silence To reject the call press the end key 89 Make a PTT group call 1 To calla group select Options gt Contacts select Options gt Talk to many mark the contacts you want to call and select OK Callback requests Send a callback request If you make a one to one call and do not get a response you can send a request for the person to call you back To send a callback request from Contacts scroll to a contact and select Options gt Send callback request Respond to a callback request When someone sends you a callback request 7 new callback request is displayed in the standby mode Select Show to open Callback inbox Scroll to a contact and press the call key Channels When you are connected to a channel all members joined to the channel hear you talking Up to five channels can be active at the same time When more than one channel is active select Swap to change the channel you want to talk to Channels are registered with a URL address One user registers the channel URL in the network by joining the channel the first time Create your own channel 1 Select Options gt PTT channels Select Options gt New channel g
14. Some activation keys may be connected to a specific SIM card and the protected content can be accessed only if the SIM card is inserted in the device Select Menu gt Settings gt Data mgr gt Actv keys to view the digital rights activation keys saved in your phone To view valid keys 9 that are connected to one or more media files select Valid keys Group keys which contain several keys are indicated with E5 To view the keys contained in the group key select the group key To view invalid keys Q with which the time period for using the file is exceeded select nvalid keys To buy more usage time or extend the usage period for a media file select an invalid key and Options gt Get new key It may not be possible to update activation keys if web service message reception is disabled See Service message settings p 39 To view activation keys that are not in use select Not in use Unused activation keys have no media files connected to them To view detailed information such as the validity status and the ability to send the file scroll to an activation key and select it 99 17 Battery information E Charging and discharging Your device is powered by a rechargeable battery The battery can be charged and discharged hundreds of times but it will eventually wear out When the talk and standby times are noticeably shorter than normal replace the battery Use only Nokia approved batteries and recharg
15. To leave the IM group select Options gt Leave IM group Search for IM groups and users To search for groups select Menu gt Settings gt IM gt IM groups gt Options gt Search You can search IM groups by Group name Topic or Members user ID To 82 join or save a group that is found in the search scroll to it and select Options gt Join or Save To search for new contacts select M contacts gt Options gt New IM contact gt Search from server To start a conversation with a new user scroll to the user and select Options gt Open conversation To save the new contact select Add to M contacts Chat in an IM group Select Menu gt Settings gt IM gt IM groups After you join an IM group you can view the messages that are exchanged in the group and send your own messages To send a message write the message and press the scroll key or the call key To send a private message to a member if allowed in the group select Options gt Send private message select the recipient write the message and press the scroll key To reply to a private message sent to you scroll to the message and select Options gt Reply To invite IM contacts who are online to join the IM group if allowed in the group select Options gt Send invitation select the contacts you want to invite write the invitation message and select Send Start and view individual conversations Select Menu gt Settings gt I
16. With this device you can access content protected with WMDRM 10 OMA DRM 2 0 and OMA DRM 1 0 If certain DRM software fails to protect the content content owners may ask that such DRM software s ability to access 98 new DRM protected content be revoked Revocation may also prevent renewal of such DRM protected content already in your device Revocation of such DRM software does not affect the use of content protected with other types of DRM or the use of non DRM protected content Digital rights management DRM protected content comes with an associated activation key that defines your rights to use the content If your device has OMA DRM protected content to back up both the activation keys and the content use the backup feature of Nokia PC Suite Other transfer methods may not transfer the activation keys which need to be restored with the content for you to be able to continue the use of OMA DRM protected content after the device memory is formatted You may also need to restore the activation keys in case the files on your device get corrupted If your device has WMDRM protected content both the activation keys and the content will be lost if the device memory is formatted You may also lose the activation keys and the content in case the files on your device get corrupted Losing the activation keys or the content may limit your ability to use the same content on your device again For more information contact your service provider
17. call When a video call arrives gc is displayed Press the call key to answer the video call Allow video image to be sent to caller is shown If you select Yes the image captured by the camera in your device is 25 shown to the caller If you select No or do nothing video sending is not activated and a grey screen is shown in place of the video Even if you have denied video sending during a video call the call is still charged as a video call Check the pricing with your service provider To end the video call press the end key E Video sharing Use Video sharing to send live video from your mobile device to another compatible mobile device during a voice call Video sharing requirements Because Video sharing requires a 3G universal mobile telecommunications system UMTS connection your ability to use Video sharing depends on 3G network availability Contact your service provider for questions about network availability and fees associated with this application To use Video sharing you must do the following e Ensure that your device is set up for person to person connections e Ensure you have an active UMTS connection and are within UMTS network coverage If you start the sharing session while you are within UMTS network coverage and a handover to GSM occurs the sharing session is discontinued but your voice call continues e Ensure that both the sender and recipient are registered to the UMTS network If you
18. call duration during a call Summary after cal to set the phone to briefly display the approximate duration of the last call Speed dialling gt On to set the phone to dial the numbers assigned to the speed dialing keys 2 to 9 by pressing and holding the corresponding number key Anykey answer gt On to answer an incoming call by briefly pressing any key except the left and right selection keys volume keys the power key and the end key Line in use network service shown only if the SIM card supports two subscriber numbers that is two phone lines Select which phone line Line 7 or Line 2 you want to use for making calls and sending short messages Calls on both lines can be answered irrespective of the selected line You cannot make calls if you select Line 2and have not subscribed to this network service To 77 prevent line selection select Line change gt Disable if supported by your SIM card To change this setting you need the PIN2 code Call divert Call divert is a network service 1 Select which calls you want to divert Voice calls Data and video calls or Fax calls 2 Select the desired option For example to divert voice calls when your number is busy or when you reject an incoming call select f busy 3 To set the divert option on or off select Options gt Activate or Cancel To check whether the option is activated select Check status Several divert options can be active at the same time
19. calls text messages packet data connections and fax and data calls registered by the phone Connections to your remote mailbox multimedia messaging center or browser pages are shown as data calls or packet data connections in the general communications log Note The actual invoice for calls and services from your service provider may vary depending on network features rounding off for billing taxes and so forth Note Some timers including the life timer may be reset during service or software upgrades Recent calls The phone registers the phone numbers of missed received and dialed calls and the approximate duration of your calls The phone registers missed and received calls only if the network supports these functions and the phone is switched on and within the network service area To view recent calls network service select Menu gt Log gt Recent calls and a call type To clear all recent call lists in the Recent calls view select Options gt Clear recent calls To clear only one of the call registers open the register you want to erase and select Options gt Clear list General log To view the general log select Menu gt Log and scroll right To filter the log select Options gt Filter and the filter type To erase all the log contents permanently select Options gt Clear log gt Yes 28 4 Write text When you write text appears on the top right of the display indicating pre
20. compatible PC and download video clips from compatible internet video services to your phone using packet data E Gallery functions To set an image as a wallpaper select mages and scroll to the image Select Options gt Use image gt Set as wallpaper To assign the image to a contact select Assign to contact To set a video as a video ringing tone select Videos and scroll to the video Select Options gt Use video gt Set as ringing tone To assign the video for a contact select Assign to contact To copy files to phone memory or to the memory card scroll to the file or mark the files and select Options gt Organise gt Copy to phone mem or Copy to memory card To create image or video folders and move files to them select mages or Videos and scroll to a file Select Options gt Organise gt New folder and the memory and 42 enter a name for the folder Mark the files you want to move to the folder and select Options gt Organise gt Move to folder and the folder View videos and images When you are viewing videos or still images in the phone mode you can activate the video view mode Turn the lower part of the phone 90 degrees to the left so that the camera lens is pointing away from you In video view mode the display automatically changes to landscape and you can put the phone on the table for example while viewing To view the next or previous still images press the fast forward or rewind media
21. features that require cellular network coverage Calls may still be possible to the official emergency number programmed into your device To make calls you must first activate the phone function by changing profiles If the device has been locked enter the lock code E Indicators The phone is connected to a UMTS network The phone is connected to a GSM network The phone is in offline mode and not connected to a cellular network See Offline profile p 17 You received one or several messages to the nbox folder in Messaging You received new e mail in your remote mailbox There are messages waiting to be sent in Outbox See Outbox p 35 You have missed calls See Recent calls p 28 eog xag Shown if Ringing type is set to Silentand Message alert tone and E mail alert tone are set to Off See Profiles p 59 rO The phone keypad is locked See Keypad lock keyguard p 20 da The loudspeaker is activated amp An alarm is active 2 The second phone line is being used See Line in use in Call p 77 QO q A All calls to the phone are diverted to your call mailbox or to another number If you have two phone lines the divert indicator is _1 a for the first line and _2_4 for the second Q A headset is connected to the phone D A loopset is connected to the phone Q The connection to a Bluetooth headset has been lost D D A data call is active Y A GPRS packet data connection is active ind
22. flash files made for mobile devices Select Menu gt Media gt Flash Player To open a folder or play a flash file select it 10 Personalization E Themes To change the look of your phone display activate a theme A theme can include the standby mode wallpaper and power saver You can edit a theme to personalize your phone further Select Menu gt Personalis gt Themes To see a list of the available themes select General The active theme is indicated by a check mark To preview a theme scroll to the theme and select Options gt Preview To activate the previewed theme select Set In Themes you can also set the menu view type set a custom wallpaper and personalize the look of the power saver Audio theme To apply or edit an audio theme select Menu gt Personalis gt Themes gt Audio themes To apply an audio theme select Active audio theme and the desired theme 58 You can personalize the sounds associated with an event or function To save the personalized theme in the Audio themes main view select Options gt Save theme and enter a name for the theme E Profiles In Profiles you can adjust and personalize the phone tones for different events environments or caller groups You can see the currently selected profile at the top of the display in the standby mode If the Genera profile is in use only the current date is shown Select Menu gt Personalis gt Profiles To activate the
23. how long it stays on the screen and set a background ora color effect to the image Edit sound clip shown only if you have added a sound clip To cut or move the sound clip to adjust its length or to remove or duplicate the clip Edit transition There are three types of transitions at the start of a video at the end of a video and transitions between video clips You can select start transition when the first transition of the video is active Insert Select Video clip Image Text Sound clip or New sound clip Movie Preview the movie in the full screen or as a thumbnail save or send the movie or cut the movie to a proper size for sending it in a multimedia message 44 To take a snapshot of a video clip in the cut video view select Options gt Jake snapshot In the thumbnail preview view press the scroll key and select Jake snapshot To save your video select Options gt Movie gt Save To define the Memory in use select Options gt Settings To send the video select Send gt Via multimedia Via e mail Via Bluetooth or Via infrared Contact your service provider for details of the maximum multimedia message size that you can send If your video is too large to send in a multimedia message XJ appears Transfer videos from PC To transfer videos from a compatible PC use a compatible USB cable or Bluetooth connectivity The requirements of the PC for video transfer e Microsoft Windows XP operati
24. including the cache cookies form data passwords and browsing history select Menu gt Web gt Browser gt Options gt Clear privacy data gt All Browser settings Select Options gt Settings gt General Page Privacy or Web feeds and from the following General Access point Select the default access point Homepage Define the address of the desired homepage Mini map Set on or off History list Select whether a list of the pages you have visited during the current browsing session are displayed when you select Back Security warnings Hide or show security notifications Java Ecma Script Enable or disable the use of scripts Page Load content Select what type of content is loaded automatically while browsing If you select Text only to load images during browsing select Options gt Tools gt Load images Screen size Choose how to use the display area for viewing pages Default encoding When you select Automatic the browser automatically tries to choose the correct character encoding Block pop ups Allow or block automatic opening of different pop ups while browsing Automatic reload Enable or disable automatic refresh of browser pages Font size Select the font size Privacy Auto bookmarks Select On if you want the bookmarks to be automatically saved in the Auto bookmarks folder when you visit a page When you select Hide folder the bookmarks are still automatically ad
25. input press and select Activate predictive text This activates predictive text input for all editors in the phone 1 To write the desired word press the keys 2 9 Press each key only once for one letter The word changes after every keypress For the most common punctuation marks press 1 For more punctuation marks and special characters press and hold 29 To erase a character press the clear key To erase more characters press and hold the clear key 2 When you have finished the word and it is correct to confirm it scroll forward or insert a space If the word is not correct to view the matching words the dictionary has found one by one press repeatedly If the character is shown after the word the word you intended to write is not in the dictionary To add a word to the dictionary select Spell Enter the word up to 32 letters using traditional text input and select OK The word is added to the dictionary When the dictionary becomes full a new word replaces the oldest added word Write compound words Write the first half of a compound word and scroll forward to confirm it Write the last part of the compound word and to complete the compound word press O to add a space E Copy and delete text 1 To select letters and words press and hold and at the same time scroll left or right As the selection moves text is highlighted To select lines of text press and hold and at the same time sc
26. network service To set when your e mail messages are sent select mmediately or During next conn Send copy to se f Select Yes to send a copy of the e mail to the address defined in My e mail address Include signature Select Yes to attach a signature to your e mail messages and to create or edit a signature text New e mail alerts To not receive alerts about new e mail select Off Retrieval settings Select Retrieval settings and from the following settings E mail to retrieve To only retrieve headers select Headers only To limit how much data is retrieved select Size imit and enter the maximum amount of data per message in kilobytes To retrieve messages and attachments select Msgs amp attachs The Size limitand Msgs amp attachs options are only available with POP3 mailboxes Retrieval amount To limit the number of messages to retrieve from the inbox of the remote mailbox select From Inbox gt No of e mails and enter the maximum number of messages to retrieve You can also limit the number of messages to retrieve from other subscribed folders in From folders only IMAP4 mailboxes 38 MAP4 folder path only IMAP4 mailboxes Define the folder path for IMAP4 mailboxes Folder subscriptions only IMAP4 mailboxes Select the mailbox folders you want to subscribe to To subscribe to or unsubscribe from a folder scroll to it and select Options gt Subscribe or Cancel subscription Automatic retri
27. open RealPlayer select Menu gt Media gt RealPlayer RealPlayer does not support all file formats or all the variations of file formats Play media files To play a media file in RealPlayer select Options gt Open and from the following Most recent clips to play media files that you have recently played Saved clip to play media files saved in the phone or memory card To stream content over the air e Select a streaming link saved in the gallery A connection to the streaming server is established e Open a streaming link while browsing the web To stream live content you must first configure your default access point See Access points p 79 Many service providers require you to use an internet access point IAP for your default access point Other service providers allow you to use a WAP access point Contact your service provider for more information 57 In RealPlayer you can only open an rtsp URL address You cannot open an http URL address however RealPlayer recognizes an http link to a ram file since a ram file is a text file containing an rtsp link Warning Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud Shortcuts during play Scroll up to seek forward or down to seek back in the media file Press the volume keys to increase or decrease the sound volume E Flash Player With Flash Player you can view play and interact with
28. other devices to determine their compatibility with this device There may be restrictions on using Bluetooth technology in some locations Check with your local authorities or service provider Features using Bluetooth technology or allowing such features to run in the background while using other features increase the demand on battery power and reduce the battery life Bluetooth connection settings Select Menu gt Settings gt Connectivity gt Bluetooth When you activate Bluetooth technology for the first time you are asked to give a name to your phone Bluetooth to switch Bluetooth on or off My phone s visibility gt Shown to all to allow your phone to be found by other Bluetooth devices at all times To allow your phone to be found for a defined time period select Define period For security reasons it is advisable to use the Hidden setting whenever possible My phone s name to define a name for your phone Remote SIM mode gt On to enable the usage of the SIM card of the phone by another device for example a car kit by Bluetooth technology SIM access profile When the wireless device is in the remote SIM mode you can only use a compatible connected enhancement such as a car kit to make or receive calls Your wireless device will not make any calls except to the emergency numbers programmed into your device while in this mode To make calls from your device you must first leave the remote SIM mode
29. other users Your service provider may have disabled the editing of this option Show my PTT address Select Never if you want to hide your PTT address from others 88 Show my login status Select whether your status is shown to others Connection settings Contact your PTT service provider for the connection settings Log in to PTT Select Menu gt Settings gt Connectivity gt PIT PTT automatically logs in to the service when started When log in is successful PTT automatically connects to channels that were active when the application was last closed If the connection is lost the device automatically tries to log back in until you exit PTT indicates a PTT connection EN indicates that PTT is set to do not disturb DND Exit PTT Select Menu gt Settings gt Connectivity gt PTT gt Options gt Exit Log out from PIT after exiting application is displayed Select Yes to log out and close the service If you want to keep the application active in the background select No Make a one to one call Warning Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud 1 Select Menu gt Settings gt Connectivity gt PTT gt Options gt Contacts scroll to the contact you want to talk to and press the call key 2 When the connection has been established to talk to the other participant press and hold the call key while you talk 3 To end the
30. receive multimedia messages only when you are in your home network select Auto in home netw To always receive multimedia messages select A ways automatic To retrieve messages manually select Vanual To not receive any multimedia messages or advertisements select Off Allow anon msgs To reject messages coming from an anonymous sender select No Receive adverts Define whether you want to allow reception of multimedia message advertisements Receive report If you want the status of the sent message Pending Failed or Delivered to be shown in Reports select Yes Receiving a delivery report of a multimedia message that has been sent to an e mail address may not be possible Deny report sending gt Yes to deny sending delivery reports 37 Message validity network service If the recipient of a message cannot be reached within the validity period the message is removed from the multimedia message center E mail settings Settings for mailboxes Select Menu gt Messaging gt Options gt Settings gt E mail gt Mailboxes and a mailbox If no mailbox settings have been defined before you are asked if you want to define the settings Connection settings gt Incoming e mail and Outgoing e mail To define the correct settings contact your e mail service provider User settings Select User settings and from the following settings My name Enter the name to be displayed in outgoing e mail Send message
31. select Options gt Duplicate access point Depending on the connection type selected in Data bearer only certain settings are available Fill in all fields marked with Must be defined or with an asterisk Contact your service provider for the following settings Data bearer Access point name for packet data only Dia up number for data call only Username Password Authentication Homepage Data call type for data call only and Maximum data speed for data call only Connection name Enter a descriptive name for the connection 79 Prompt password lf you must enter a new password every time you log onto a server or if you do not want to save your password to the phone select Yes If necessary to define the internet protocol IP version phone IP address domain name system DNS servers proxy server and advanced data call settings such as callback PPP compression login script and modem initialization string select Options gt Advanced settings Contact your service provider for the correct settings Packet data The packet data settings affect all access points using a packet data connection Packet data connection If you select When available and you are in a network that supports packet data the phone registers to the packet data network and short messages are sent using a packet data connection If you select When needed the phone uses a packet data connection only if you start an application or function
32. shake the device Rough handling can break internal circuit boards and fine mechanics e Do not use harsh chemicals cleaning solvents or strong detergents to clean the device 102 e Do not paint the device Paint can clog the moving parts and prevent proper operation e Use a soft clean dry cloth to clean any lenses such as camera proximity sensor and light sensor lenses e Use only the supplied or an approved replacement antenna Unauthorized antennas modifications or attachments could damage the device and may violate regulations governing radio devices e Use chargers indoors e Always create a backup of data you want to keep such as contacts and calendar notes e To reset the device from time to time for optimum performance power off the device and remove the battery These suggestions apply equally to your device battery charger or any enhancement If any device is not working properly take it to the nearest authorized service facility for service Disposal K The crossed out wheeled bin symbol on your product literature or packaging reminds you that in the European Union all electrical and electronic products batteries and accumulators must be taken to separate collection at the end of their working life Do not dispose of these products as unsorted municipal waste Return the products to collection to prevent possible harm to the environment or human health from uncontrolled waste disposal and to promote
33. that needs it The packet data connection can be closed when it is not needed by any application If there are no packet data services available and you have chosen When available the phone periodically tries to establish a packet data connection Access point The access point name is needed when you want to use your phone as a modem with your computer Data call The data call settings affect all access points that use a GSM data call Online time to set the data call to disconnect automatically after a time out if there is no activity To enter a time out select User defined and enter the time in minutes If you select Unlimited the data call is not disconnected automatically SIP settings View and edit session initiation protocol SIP profiles Configurations Certain functions such as web browsing and multimedia messaging may require configuration settings You may receive the settings from your service provider See Configuration settings p 13 To delete a configuration scroll to the configuration and select Options gt Delete 80 Access point name control With the access point name control service you can restrict the use of packet data access points This setting is only available if your USIM card supports the service To change the settings you need the PIN2 code Applications To view and edit settings of applications installed to your phone select Menu gt Settings gt Phone sett gt Applicatio
34. the full screen press To return to the normal view press again e To rotate an image clockwise or counterclockwise press 3 or 1 43 e To zoom in or out press 5 or O e To move on a zoomed image scroll up down left or right Edit videos To edit videos in Gallery and create custom video clips scroll to a video clip and select Options gt Video editor gt Options gt Edit video clip In the video editor you can see two timelines video clip timeline and sound clip timeline The images text and transitions added to a video are shown on the video clip timeline To switch between the timelines scroll up or down Modify video To modify the video select from the following Edit video clip options Cut Trims the video clip in the cut video clip view Add colour effect Inserts a color effect on the video clip Use slow motion Slows the speed of the video clip Mute sound or Unmute sound Mutes or unmutes the original video clip sound Move Moves the video clip to the selected location Adjust volume Adjusts the volume level Remove Removes the video clip from the video Duplicate Makes a copy of the selected video clip Edit text shown only if you added text To move remove or duplicate text change the color and style of the text define how long it stays on the screen and add effects to the text Edit image shown only if you added an image To move remove or duplicate an image define
35. to request the code see Security p 74 If you enter an incorrect lock code five times in succession the phone ignores further entries of the code Wait for 5 minutes and enter the code again When the device is locked calls may be possible to the official emergency number programmed into your device PIN codes The personal identification number PIN code and the universal personal identification number UPIN code 4 to 8 digits help to protect your SIM card against unauthorized use See Security p 74 The PIN code is usually supplied with the SIM card The PIN2 code 4 to 8 digits may be supplied with the SIM card and is required for some functions The module PIN is required to access the information in the security module The module PIN is supplied with the SIM card if the SIM card has a security module in it The signing PIN is required for the digital signature The signing PIN is supplied with the SIM card if the SIM card has a security module in it PUK codes The personal unblocking key PUK code and the universal personal unblocking key UPUK code 8 digits are required to change a blocked PIN code and UPIN code respectively The PUK2 code is required to change a blocked PIN2 code If the codes are not supplied with the SIM card contact your local service provider for the codes Barring password The barring password 4 digits is required when using Call barring See Call barring p 78 You can
36. to connect to an online bank or another site or remote server for actions that involve transferring confidential information They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software eX Important Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller they must be used correctly in order to benefit from increased security The existence of a certificate does not offer any protection by itself the certificate manager must contain correct authentic or trusted certificates for increased security to be available Certificates have a restricted lifetime If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid check that the current date and time in your device are correct Before changing any certificate settings you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner View certificate details and check authenticity You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked 75 The phone notifies you if the identity of the server is not authentic or if you do not have the correct security certificate in your phone To check certificate details
37. update all active connections are disconnected Check any alarms as these may be affected Enhancement To change settings of an enhancement in the Enhancement sett view scroll to an enhancement such as Headset select Options gt Open and from the following options Default profile to select the profile you want to activate each time you connect the enhancement to your phone Automatic answer to set the phone to answer an incoming call automatically after 5 seconds when this enhancement is connected to your phone If the Ringing type is set to Beep once or Silent automatic answer cannot be used and you must answer the phone manually Lights To set the phone lights continuously on while using the enhancement select On Security Select Phone and SIM card Certificate management or Security module Phone and SIM card You can change the following codes lock code U PIN code and PIN2 code These codes can only include the numbers from 0 to 9 Avoid using access codes similar to emergency numbers to prevent accidental dialing of the emergency number Code in use to select the active code P N or UPIN for the active USIM This is shown only if the active USIM supports UPIN and the UPIN is not rejected PIN code request or UPIN code request to set the phone to request the code each time the phone is switched on Some SIM cards may not allow the PIN code request to be turned Off If you select Code in use gt UPIN UP
38. 90 degrees to the right while in the phone mode so that the camera lens is pointing toward you when you look at the display Music mode To activate the music mode while in the phone mode turn the lower part of the phone 180 degrees to the right so that the keys used to control music playback are on the same side as the display Video call mode During video calls you can let the call recipient to see your face Turn the lower part of the phone so that the camera lens is pointing toward you when you look at the display You can also turn the camera lens to the opposite direction Video view mode When you are viewing a video or still images in the phone mode you can activate the video view mode Turn the lower part of the phone 90 degrees to the left so that the camera lens is pointing away from you In video view mode the display automatically changes to landscape and you can put the phone on the table for example while viewing To view the next or previous still images or to fast forward or rewind the video press the fast forward or rewind media key To play or pause the video press the play pause stop media key To stop the video press and hold the play pause stop media key E Standby mode When you have switched on the phone and it is registered to a network the phone is in the standby mode and ready for use To open the list of last dialed numbers press the call key To use the voice commands or voice dialing
39. IN code request is shown instead PIN code or UPIN code PIN2 code and Lock code to change the codes Keypad autolock period gt User defined to automatically lock the keypad after a defined period of inactivity Phone autolock period to set a time out after which the phone is automatically locked To use the phone again you need to enter the correct lock code To turn off the autolock period select None 74 Lock if SIM card changed to set the phone to prompt for the lock code when an unknown new SIM card is inserted into your phone The phone keeps a list of SIM cards that are recognized as the owner cards Closed user group network service to specify a group of people whom you can call and who can call you For more information contact your service provider To activate the default group agreed on with the service provider select Default If you want to use another group you need to know the group index number select On When calls are limited to closed user groups calls may be possible to the official emergency number programmed into your device Confirm SIM services network service to set the phone to display confirmation messages when you use a SIM card service Certificate management A list of authority certificates that have been stored in your phone is displayed in Certificate management To see a list of personal certificates if available scroll right Digital certificates should be used if you want
40. M gt Conversations This shows a list of the IM users with whom you have an ongoing conversation S next to a user indicates that you have received a new message from that user To view an ongoing conversation select the user To send a message write your message and press the scroll key To return to the conversations list without closing the conversation select Back To start a new conversation select Options gt New conversation gt Select from contacts and from a list of your saved IM contacts that are currently online or select Enter user ID to enter the user ID To close the conversation select Options gt End conversation To save a user to your IM contacts scroll to the user and select Options gt Add to IM contacts 83 To block messages from a user scroll to the user and select Options gt Blocking options gt Add to blocked list IM contacts Select Menu gt Settings gt IM gt IM contacts You can see a list of your saved IM contacts indicates contacts that are currently online indicates contacts that are busy and indicates contacts that are offline To create a new contact select Options gt New IM contact gt Enter manually Fill in the Nickname and User ID fields and select Done To start or continue a conversation with a contact scroll to the contact and select Options gt Open conversation Create a new IM group Select Menu gt Settings gt IM gt IM groups gt
41. Nokia 5700 XpressMusic User Guide 9255338 Issue 1 DECLARATION OF CONFORMITY Hereby NOKIA CORPORATION declares that this RM 230 product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com phones declaration_of_conformity C 0434 2007 Nokia All rights reserved Nokia Nokia Connecting People Nokia Care Navi and Visual Radio are trademarks or registered trademarks of Nokia Corporation Nokia tune and Visual Radio are sound marks of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited This product includes software licensed from Symbian Software Ltd 1998 2007 symbian Symbian and Symbian OS are trademarks of Symbian Ltd US Patent No 5818437 and other pending patents T9 text input software Copyright C 1997 2007 Tegic Communications Inc All rights reserved amp Java and all Java based marks are trademarks or registered trademarks of Sun Microsystems Inc lt Java POWERED This product is licensed under the MPEG 4 Visual Patent Portfolio License i for personal and noncommercial use in connection with information which has been encoded
42. Offline profile the phone is not connected to the GSM network If no SIM card is installed to use some functions of the phone start the phone in Offline Important In the offline profile you cannot make or receive any calls or use other features that require cellular network coverage Calls may still be possible to the official emergency number programmed into your device To make calls you must first activate the phone function by changing profiles If the device has been locked enter the lock code E 3 D tones With 3 D tones you can apply three dimensional sound effects to ringing tones Not all ringing tones support 3 D effects To edit 3 D tone settings select Menu gt Personalis gt 3 D tones To enable the 3 D effects select 3 D tones gt On To change the ringing tone select Ringing tone and the desired ringing tone To change the 3 D effect that is applied to the ringing tone select Sound trajectory and the desired effect To modify the effect select Trajectory speed Doppler effect or Reverberation Doppler effect may not be available for all effects To listen to the ringing tone with the 3 D effect select Options gt Play tone If you enable the 3 D tones but do not select any 3 D effect stereo widening is applied to the ringing tone 11 Web E Mobile Search Use Mobile Search to get access to search engines and find and connect to local services websites images and mobile content You can use the a
43. Select Options during a call for some of the following options Transfer to connect a call on hold to an active call and disconnect yourself Replace to end an active call and replace it by answering the waiting call Send DTMF to send DTMF tone strings for example a password Enter the DTMF string or search for it in Contacts To enter a wait character w or a pause character p press repeatedly To send the tone select OK ty Tip You can add DTMF tones to the DTMF field in a contact card 0S E Make a video call When you make a video call you can see a real time two way video between you and the recipient of the call The live video image or video image captured by the camera in your device is shown to the video call recipient To be able to make a video call you may need to have a USIM card and be in the coverage of a UMTS network For availability of and subscription to video call services contact your service provider A video call can only be made between two parties The video call can be made to a compatible mobile phone or an ISDN client Video calls cannot be made while there is another voice video or data call active 24 We You are not receiving video the recipient is not sending video or the network is not transmitting it N You have denied video sending from your device 1 Enter the phone number in the standby mode or select Menu gt Contacts and scroll to the desired contact 2 Select O
44. When set to Yes the status of the sent message Pending Failed Delivered is shown in Reports 36 Message validity lf the recipient of a message cannot be reached within the validity period the message is removed from the message service center Note that the network must support this feature Message sent as to define how the message is sent Default is Text Preferred connection You can send text messages using the normal GSM network or if supported by the network packet data Reply via same centre network service If you select Yes and the recipient replies to your message the return message is sent using the same message service center number Some networks do not provide this option Multimedia messaging settings Select Menu gt Messaging gt Options gt Settings gt Multimedia message and from the following options Image size Define the size of the image in a multimedia message If you select Original the image is not scaled MMS creation mode If you select Guided the phone informs you if you try to send a message that may not be supported by the recipient To set the phone to prevent you from sending messages that are not supported select Restricted If you select Free message creation is not restricted but the recipient may not be able to view your message Access point in use Select which access point is used as the preferred connection for multimedia messaging Multimedia retrieval To
45. a beeping sound during recording Recorded files are stored in Gallery See Gallery p 42 Select Menu gt Media gt Recorder To record a sound clip select Options gt Record sound clip or select e To listen to the recording select gt E RealPlayer With RealPlayer you can play media files such as video clips saved in the phone memory or memory card or stream media files over the air by opening a streaming 56 link RealPlayer does not support all file formats or all the variations of file formats To open RealPlayer select Menu gt Media gt RealPlayer To play a media file select Options gt Open gt Most recent clips or Saved clip To stream content over the air e Select a streaming link saved in the gallery e Opena streaming link while browsing the web To stream live content you must first configure your default access point See Access points p 79 Contact your service provider for more information In RealPlayer you can only open an rtsp URL address You cannot open an http URL address however RealPlayer recognizes an http link to a ram file since a ram file is a text file containing an rtsp link Warning Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud With RealPlayer you can play media files such as video clips saved in the phone memory or memory card or stream media files over the air by opening a streaming link To
46. a new custom muvee by using the same style settings select Options gt Recreate 55 Select content To edit the selected video clips in the Videos amp images folder select Options gt Select contents You can select which parts of the video clip you want to include or exclude in the muvee In the slide green indicates included red indicates excluded and grey indicates neutral parts To include a part of the video clip in the muvee scroll to the part and select Options gt nclude To exclude a part select Options gt Exclude To exclude a shot select Options gt Exclude shot To let Movie director randomly include or exclude a certain part of the video clip scroll to the part and select Options gt Mark as neutral To randomly include or exclude parts of the clip select Options gt Mark all as neutral Settings In the style selection view select Options gt Customise gt Settings to edit the following options Memory in use Select where to save your muvees Resolution Select the resolution of your muvees Select Automatic to use the optimal resolution based on the number and length of the video clips you have selected Default muvee name Set a default name for the muvees E Videos To access the videos folder in Gallery select Menu gt Media gt Videos E Recorder The voice recorder allows you to record phone conversations and voice memos If you record a phone conversation all parties hear
47. able or activate Bluetooth connection and select PC Suite as the connection mode You cannot transfer WMDRM protected music files using PC Suite To change the default USB connection mode select Menu gt Settings gt Connectivity gt USB gt USB mode Both Windows Media Player and Nokia Music Manager in Nokia PC Suite have been optimized for transferring music files For information about transferring music with Nokia Music Manager see the Nokia PC Suite user guide Music transfer with Windows Media Player The functionality of the music synchronization may vary between different versions of the Windows Media Player application For more information see the corresponding Windows Media Player guides and helps 49 9 Media E Visual Radio You can use the Visual Radio application as an FM radio with automatic tuning and preset stations or with parallel visual information related to the radio program if you tune in to stations that offer Visual Radio service The Visual Radio service uses packet data network service To use the Visual Radio service the following requirements must be met e The radio station and your service provider must support this service e Your internet access point must be defined for access to the network operator s Visual Radio server e The radio station must have the correct Visual Radio service ID defined and have Visual Radio service enabled Visual Radio cannot be started when the phone is in
48. acy and legitimate rights of others including copyrights Copyright protections may prevent some images music including ringing tones and other content from being copied modified transferred or forwarded Your device supports internet connections and other methods of connectivity Like computers your device may be exposed to viruses malicious messages and applications and other harmful content Exercise caution and open messages accept connectivity requests download content and accept installations only from trustworthy sources To increase the security of your device consider installing antivirus software with a regular update service and using a firewall application Warning To use any features in this device other than the alarm clock the device must be switched on Do not switch the device on when wireless device use may cause interference or danger E Network services To use the phone you must have service from a wireless service provider Many of the features require special network features These features are not available on all networks other networks may require that you make specific arrangements with your service provider before you can use the network services Your service provider can give you instructions and explain what charges will apply Some networks may have limitations that affect how you can use network services For instance some networks may not support all language dependent characters and services
49. ansfer data between the phone and a compatible PC You can also use the USB data cable with Nokia PC Suite Select Menu gt Settings gt Connectivity gt USB To select the default USB connection mode select USB mode and the desired mode To have the device ask the purpose of the connection each time the cable is connected select Ask on connection gt Yes To use the phone with Nokia PC Suite select PC Suite To synchronize media files such as music with a compatible version of Windows Media Player select Media player To access files on the inserted memory card as a removable drive select Data transfer After transferring data ensure that it is safe to unplug the USB data cable from the PC E Data transfer With data transfer you can copy or synchronize contacts calendar entries and possibly other data such as video clips and images from a compatible phone using a Bluetooth or infrared connection When both Bluetooth and infrared are available on both devices it is preferable to use Bluetooth Depending on the other phone synchronization may not be possible and data can be copied only once To transfer or synchronize data do the following 1 When using infrared place the devices so that the infrared ports face each other and activate infrared on both devices Select Menu gt Settings gt Connectivity gt Transfer lf you have not used Transfer before information about the application is displayed Select Cont
50. connecting 61 connection security 62 disconnecting 64 feeds 63 saving a page 64 settings 61 viewing a saved page 64 writing text See text input 109
51. d password To log out select Options gt Log out IM settings Select Menu gt Settings gt IM gt Options gt Settings To edit the IM application settings select M settings To set who is allowed to see when you are online select Show my availability To set who is allowed to send you messages or invitations select Allow messages from or Allow invitations from To edit IM server connection settings select Servers scroll to the server and select Options gt Edit Contact your service provider for the settings To define new server settings select Options gt New server To choose the default server select Defau t server and the server To be automatically connected to the IM server during the days and times you define select M login type gt Automatic To only be automatically connected while in your home network select Auto in home netw To be automatically connected when you start the IM application select On app start up To connect manually select Manual To set days and times when to establish a connection automatically select Automatic login days and Automatic login hrs Join and leave an IM group Select Menu gt Settings gt IM gt IM groups IM groups are only available if supported by the service provider To join an IM group select it and enter your screen name To join an IM group not on the list but whose group ID you know select Options gt Join new group and enter the group ID
52. data connection Allow sync requests gt Yes to allow that the server starts the synchronization Accept all sync requests gt No to require a confirmation before the server starts the synchronization Network authentication Only visible if Internet is selected as Data bearer To use HTTPS authentication select Yes and enter user name and password in Network username and Network password Synchronize data In the main view scroll to a profile and select Options gt Synchronise The status of the synchronization is shown After synchronization is complete select Options gt View og to open a log file showing the synchronization status Complete or Incomplete and how many calendar or contact entries have been added updated deleted or discarded not synchronized in the phone or on the server 92 E Infrared Use infrared to connect two devices and transfer data between them With infrared you can transfer data such as business cards calendar notes and media files with a compatible device Do not point the infrared IR beam at anyone s eye or allow it to interfere with other IR devices This device is a Class 1 laser product Send and receive data 1 Ensure that the infrared ports of the devices face each other The positioning of the devices is more important than angle or distance 2 To turn on infrared on your device select Menu gt Settings gt Connectivity gt Infrared Turn on infrared on the
53. ded to the folder Form data saving lf you do not want the data you enter to different forms ona web page to be saved and used next time the page is entered select Off 65 Cookies Enable or disable the receiving and sending of cookies a means for content providers to identify users and their preferences for frequently used content Web feeds Automatic updates Define whether you want the web feeds to be updated automatically or not and how often you want to update them Setting the application to retrieve web feeds automatically may involve the transmission of large amounts of data through your service provider s network Contact your service provider for information about data transmission charges Acc point for auto update Select the desired access point for updating only available when Automatic updates is on 12 Organizer E Clock Select Menu gt Organiser gt Clock Clock settings To change the time or date select Options gt Settings For more information about the settings see Date and time p 73 Set an alarm 1 To set a new alarm scroll right to Alarm and select Options gt New alarm 2 Enter the alarm time select whether and when the alarm is repeated and select Done When an alarm is active Q is shown To cancel an alarm scroll to the alarm and select Options gt Remove alarm To deactivate a repeated alarm select Options gt Deactivate alarm Turn off the alarm Select Stop t
54. device with a hot or cold battery may not work temporarily even when the battery is fully charged Battery performance is particularly limited in temperatures well below freezing Do not dispose of batteries in a fire as they may explode Batteries may also explode if damaged Dispose of batteries according to local regulations Please recycle when possible Do not dispose as household waste Do not dismantle or shred cells or batteries In the event of a battery leak do not allow the liquid to come in contact with the skin or eyes In the event of such a leak flush your skin or eyes immediately with water or seek medical help 100 W Nokia battery authentication guidelines Always use original Nokia batteries for your safety To check that you are getting an original Nokia battery purchase it from an authorized Nokia dealer look for the Nokia Original Enhancements logo on the packaging and inspect the hologram label using the following steps Successful completion of the four steps is not a total assurance of the authenticity of the battery If you have any reason to believe that your battery is not an authentic original Nokia battery you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for assistance Your authorized Nokia service point or dealer will inspect the battery for authenticity If authenticity cannot be verified return the battery to the place of purchase Authenticate h
55. dictive text input or N appears indicating traditional text input To set the predictive text input on or off when writing text press and select Activate predictive text or Predictive text gt Off Abc abc or ABC is displayed next to the text input indicator indicating the character case To change the character case press 123 indicates the number mode To change between letter and number mode press repeatedly until number mode is active or press and select Number mode or Alpha mode W Traditional text input Press a number key 1 to 9 repeatedly until the desired character appears Not all characters available under a number key are printed on the key The availability of characters depends on the selected writing language See Writing language in Language p 73 If the next letter you want is on the same key as the present one wait until the cursor appears or scroll forward to end the time out period and enter the letter To insert a number press and hold the number key The most common punctuation marks and special characters are available under the 1 key For more characters press and hold To erase a character press the clear key To erase more characters press and hold the clear key To insert a space press O To move the cursor to the next line press O three times E Predictive text input To enter any letter with a single keypress use predictive text input To select the predictive text
56. dress you have added to the contact card of the recipient If the recipient has several SIP addresses in the contact card select the SIP address to which you want to send the invitation and Se ect to send the invitation If the SIP address of the recipient is not available enter a SIP address Select OK to send the invitation 3 Sharing begins automatically when the recipient accepts the invitation The loudspeaker is active You can also use a headset to continue your voice call while you share live video 4 Select Pause to pause the sharing session Select Continue to resume sharing 5 To end the sharing session select Stop To end the voice call press the end key Accept an invitation When someone sends you a share invitation an invitation message is displayed showing the sender s name or SIP address If your device is not set to Silent it rings when you receive an invitation If someone sends you a share invitation and you are not within UMTS network coverage you will not know that you received an invitation When you receive an invitation select from the following Accept to begin the sharing session and activate the view mode 27 Reject to decline the invitation The sender receives a message that you rejected the invitation You can also press the end key to decline the sharing session and disconnect the voice call To end the sharing session select Stop E Log In the log you can monitor phone
57. e contact your service provider Note that roaming services may be more limited than home network services Many of the services available for traditional voice calls for example call mailbox are not available for PTT communications Define a PTT access point Many service providers require you to use an internet access point for your default access point Other service providers allow you to use a WAP access point Settings for PIT For PTT service settings contact your service provider To view and change PTT settings select Menu gt Settings gt Connectivity gt PIT gt Options gt Settings gt User settings or Connection settings User settings Accepted list calls To see a notification of incoming calls select Notify To answer PTT calls automatically select Auto accept If you do not want to receive PTT calls select Not allowed PTT call alert tone Select the tone for incoming PTT calls If you want the incoming call alert setting for PTT to follow your profile settings select Set by profile For example if your profile is silent PTT is set to do not disturb DND and except for callback requests you are not available to others using PTT Callback request tone Select a tone for callback requests Application start up To start PTT automatically select A ways automatic To start PTT automatically only while in your home network select Auto in home netw Default nickname Enter your nickname shown to
58. e SAR limit stated in the ICNIRP guidelines is 2 0 watts kilogram W kg averaged over 10 grams of tissue Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network That amount changes depending on a number of factors such as how close you are to a network base station The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 1 24 W kg Use of device accessories and enhancements may result in different SAR values SAR values may vary depending on national reporting and testing requirements and the network band Additional SAR information may be provided under product information at www nokia com 106 Index A access codes barring password 9 change 74 lock code 8 13 module PIN 9 PIN 8 13 PIN2 8 PUK 9 PUK2 9 signing PIN 9 UPIN 8 UPUK 9 access points 79 activation keys 98 active standby 16 alarm clock See clock application manager 95 applications 95 B battery charging 12 Bluetooth connection settings 85 disconnecting 87 paired devices 86 receiving data 87 sending data 85 bookmarks 61 browser See web c cache 64 calculator 68 calendar 67 call register See log callback requests 88 90 calls answering 23 barri
59. e a custom muvee 1 To create a a custom muvee select Menu gt Media gt Movie Select the videos for the muvee and scroll right to select the images and select Options gt Create muvee The style selection view opens 2 Scroll to the desired style and select Options gt Customise 3 In Videos amp images reorder and edit the selected items or add or remove items from your muvee You can define the order in which the files are played in the muvee Select the file you want to move Scroll to the file below which you want to place the marked file and press the scroll key To add or remove images and videos from the muvee select Options gt Add Remove In Music select the music for the muvee To add albums and their content to the muvee in the image or video clip list view select Options gt Albums In Message you can add an opening and closing text to a muvee In Length you can define the length of the muvee Select from the following Multimedia message to optimize the length of the muvee for MMS sending Auto select to include all the selected images and video clips in the muvee Same as music to set the muvee duration to be the same as the chosen music clip User defined to define the length of the muvee 4 Select Options gt Create muvee The preview view opens 5 To preview the custom muvee before saving it select Options gt Play 6 To save the muvee select Options gt Save To create
60. e calculation select To add a decimal press PN Note This calculator has limited accuracy and is designed for simple calculations E Converter Select Menu gt Organiser gt Converter 68 In the converter you can convert measurement parameters such as Length from one unit to another for example Yards to Metres The converter has limited accuracy and rounding errors may occur Set a base currency and exchange rates Before you can convert currency you need to choose a base currency usually your domestic currency and add exchange rates The rate of the base currency is always 1 The base currency determines the conversion rates of the other currencies 1 Select Currency as the measurement type and select Options gt Currency rates 2 To change the base currency scroll to the currency usually your domestic currency and select Options gt Set as base currency 3 Add exchange rates scroll to the currency and enter a new rate that is how many units of the currency equal one unit of the base currency you selected 4 After you insert all the required exchange rates you can convert currency Note When you change base currency you must enter new exchange rates because all previously set exchange rates are cleared Convert units To convert currency you must first set the exchange rate See Set a base currency and exchange rates p 69 1 Select Type and the type of measurement to convert
61. e your battery only with Nokia approved chargers designated for this device If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery Unplug the charger from the electrical plug and the device when not in use Do not leave a fully charged battery connected to a charger since overcharging may shorten its lifetime If left unused a fully charged battery will lose its charge over time If the battery is completely discharged it may take several minutes before the charging indicator appears on the display or before any calls can be made Use the battery only for its intended purpose Never use any charger or battery that is damaged Do not short circuit the battery Accidental short circuiting can occur when a metallic object such as a coin clip or pen causes direct connection of the positive and negative terminals of the battery These look like metal strips on the battery This might happen for example when you carry a spare battery in your pocket or purse Short circuiting the terminals may damage the battery or the connecting object Leaving the battery in hot or cold places such as in a closed car in summer or winter conditions will reduce the capacity and lifetime of the battery Always try to keep the battery between 15 C and 25 C 59 F and 77 F A
62. ected function Playback to play the activated voice command To use voice commands see Voice dialing p 22 To change voice command settings select Options gt Settings and from the following options Synthesiser to activate or deactivate the text to speech syntheziser that says out loud the recognized voice command Remove voice adapts to reset the voice adaptations The phone adapts to the user s voice to better recognize the voice commands E Call mailbox Call mailbox is a network service Contact your service provider for the call mailbox number To define the call mailbox number if no number is set select Menu gt Settings gt Call mailbox and when Voice mailbox number is displayed enter the voice mailbox number 71 To change the call mailbox number select Menu gt Settings gt Call mailbox gt Options gt Change number and enter the number E Speed dial To assign phone numbers to the speed dialing keys select Menu gt Settings gt Speed dial scroll to a key icon and select Options gt Assign Select the contact and the number for the speed dial To view the number assigned to a speed dialing key scroll to the key icon and select Options gt View number To change or remove the number select Change or Remove E Phone settings General Select Menu gt Settings gt Phonesett gt General gt Personalisation Date and time Enhancement Security Factory settings or Positioning
63. ed radio station to the station list Details to view channel information 52 E Camera To activate the camera mode while in the phone mode turn the lower part of the phone 90 degrees to the left so that the camera lens is pointing away from you when you look at the display To take a self portrait turn the lower part of the phone 90 degrees to the right so that the camera lens is pointing toward you when you look at the display fo gt on the upper left of the display indicates the still image mode To capture an image press the capture key You can also capture an image by pressing the scroll key The image is saved to mages in Gallery and the image is displayed To return to the viewfinder select Back To delete the image press the clear key To zoom in or out press the fast forward or rewind media key To capture images sequentially select Options gt Sequence mode gt On When you press the scroll key the camera captures six images in short intervals and displays the images ina grid To turn the flash on select Options gt Flash gt On If you select Automatic flash is used automatically when necessary Keep a safe distance when using the flash Do not use the flash on people or animals at close range Do not cover the flash while taking a picture In dim lighting to use night mode select Options gt Night mode gt On To use the self timer select Options gt Se f timer and the time you want the camera t
64. emory consumption of the different applications or file types If the phone memory is getting low remove some files or move them to the memory card E Device manager You may receive server profiles and configuration settings from your service provider or company information management department To open the device manager select Menu gt Settings gt Data mgr gt Device mgr If you have no server profiles defined the phone asks whether you want to define one To connect to a server and receive configuration settings for your phone scroll to the server profile and select Options gt Start configuration To edit a server profile select Options gt Edit profile and from the following settings Allow configuration To receive configuration settings from the server select Yes Auto accept all requests If you want the phone to ask for confirmation before accepting a configuration from the server select No Contact your service provider or company information management department for the other server profile settings E Memory card Keep all memory cards out of the reach of small children Select Menu gt Settings gt Data mgr gt Memory For details on inserting a memory card into the phone see Get started p 10 You can use it to store your multimedia files such as video clips music tracks and sound files photos and messaging data and to back up information from phone memory 97 Format the mem
65. es visit www nokia com battery 18 Enhancements Practical rules about accessories and enhancements e Keep all accessories and enhancements out of the reach of small children e When you disconnect the power cord of any accessory or enhancement grasp and pull the plug not the cord e Check regularly that enhancements installed in a vehicle are mounted and are operating properly e Installation of any complex car enhancements must be made by qualified personnel only Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care The following suggestions will help you protect your warranty coverage e Keep the device dry Precipitation humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits If your device does get wet remove the battery and allow the device to dry completely before replacing it e Do not use or store the device in dusty dirty areas Its moving parts and electronic components can be damaged e Do not store the device in hot areas High temperatures can shorten the life of electronic devices damage batteries and warp or melt certain plastics Do not store the device in cold areas When the device returns to its normal temperature moisture can form inside the device and damage electronic circuit boards e Do not attempt to open the device other than as instructed in this guide e Do not drop knock or
66. ess the end key To make a call from Contacts select Menu gt Contacts Scroll to the desired name or enter the first letters of the name and scroll to the desired name To call the number press the call key To call your call mailbox network service press and hold 1 in the standby mode You must define the mailbox number before you can call your mailbox See Call mailbox p 71 To call a recently dialed number press the call key in the standby mode The list of the last 20 numbers you called or attempted to call is shown Scroll to the number you want and press the call key To make a push to talk call see Push to talk p 87 Speed dialing You can assign a phone number to one of the speed dialing keys 2 to 9 See Assign speed dialing keys p 41 or Speed dial p 72 Call a speed dialing number in either of the following ways e Press the speed dialing key then the call key e If Speed dialling is set to On press and hold the speed dialing key until the call begins To set Speed dialling to On select Menu gt Settings gt Phone sett gt Phone gt Call gt Speed dialling gt On Voice dialing A voice tag is added automatically to all entries in Contacts Use long names and avoid similar names for different numbers Make a voice dialing call Voice tags are sensitive to background noise Use voice tags in a quiet environment Q Note Using voice tags may be difficult in a noisy environment
67. essages To delete an e mail message from the phone and retain it in the remote mailbox select Menu gt Messaging gt Mailbox gt Options gt Delete gt Phone only The e mail heading stays in your phone To remove the heading as well delete the e mail message from your remote mailbox first then connect your phone to the remote mailbox to update the status To delete an e mail from the phone and the remote mailbox select Options gt Delete gt Phone and server To cancel deletion of an e mail from both the phone and server scroll to an e mail that has been marked to be deleted during the next connection and select Options gt Restore E Outbox The outbox folder is a temporary storage place for messages that are waiting to be sent To access the outbox folder select Menu gt Messaging gt Outbox Message statuses Sending The phone is sending the message Waiting or Queued The phone is waiting to send messages or e mail Resend at time Sending failed The phone tries to send the message again after a time out period To retry sending the message immediately select Options gt Send Deferred To put documents to be on hold while they are in the outbox folder scroll to a message that is being sent and select Options gt Defer sending Failed The maximum number of sending attempts has been reached 35 E View messages on the SIM card Before you can view SIM messages you need to copy them to a f
68. etween open applications select and hold Menu The application switching window opens showing a list of open applications Scroll to an application and select it To mark or unmark an item in applications press To mark or unmark several consecutive items press and hold and scroll up or down Leaving applications running in the background increases the demand on battery power and reduces the battery life E Welcome application Welcome application starts when you switch on your phone for the first time With the Welcome application you can access the following applications Tutorial Learn about the features of your phone and how to use them Sett wizard Configure connection settings Transfer Copy or synchronize data from other compatible phones To open Welcome later select Menu gt Applications gt Welcome E Tutorial Tutorial contains an introduction to the phone features and a tutorial to teach how to use the phone The tutorial starts automatically when you turn on your phone for the first time To start the tutorial yourself select Menu gt Jutoria anda tutorial item E Help Your device has context sensitive help You can access the help from an application or from the main menu To access help when an application is open select Options gt Help To switch between help and the application that is open in the background select and hold Menu Select Options and from the following options Topic list
69. eval Select Automatic retrieval and from the following settings E mail notifications To automatically retrieve the headers to your device when you receive a notification of new e mail in your remote mailbox select Auto update or Only in home netw E mail retrieval To have e mail headers automatically retrieved at set intervals select Enabled or if you only want headers to be retrieved in your home network select Only in home netw Headers can be automatically retrieved for two mailboxes at most You can set on which days at what times and how frequently the headers are retrieved in Retrieval days Retrieval hours and Retrieval interval E mail notifications and E mail retrieval cannot be active at the same time Service message settings Select Menu gt Messaging gt Options gt Settings gt Service message and from the following settings Service messages Allow or deny the reception of service messages Download messages Download messages automatically or manually Cell broadcast settings Check with your service provider whether cell broadcast network service is available and what the available topics and related topic numbers are Select Menu gt Messaging gt Options gt Settings gt Cell broadcast and from the following settings Reception Select On or Off Language Select in which languages cell broadcast messages are received Topic detection To automatically save previously unknown to
70. ew Paired devices are indicated by 3 in the search result list In the Bluetooth main view scroll right to open a list of paired devices Do not accept Bluetooth connections from sources you do not trust To pair with a device select Options gt New paired device Select the device with which to pair Exchange passcodes To cancel pairing scroll to the device whose pairing you want to cancel and press the clear key If you want to cancel all pairings select Options gt Delete all To set a device to be authorized scroll to the device and select Options gt Set as authorised Connections between your phone and the authorized device can be made without your knowledge No separate acceptance or authorization is 86 needed Use this status only for your own devices to which others do not have access for example your PC or devices that belong to someone you trust G is added next to authorized devices in the Paired devices view If you select Set as unauthorised each connection request from the device must be accepted separately Receive data When you receive data using Bluetooth technology a tone sounds and you are asked if you want to accept the message If you accept the item is placed in nbox in Messaging Disconnect Bluetooth connection A Bluetooth connection is disconnected automatically after sending or receiving data E Connection manager In the connection manager you can identify the status of mult
71. f the phone for the first time lift it using the plastic strip shown on the back of the phone 1 You can then remove the strip To open the back cover later turn the lower part of the phone 90 degrees left or right when the number keys of the lower part are on the same side as the display and lift the back cover 2 To remove the battery lift it as shown 3 2 To release the SIM card holder slide it backwards 4 and lift it 5 Insert the U SIM card to the SIM card holder 6 Make sure that the U SIM card is properly inserted and that the golden colored contact area on the card is facing downwards and the beveled corner faces upwards Close the SIM card holder 7 and slide it forward to lock it 8 E MicroSD card slot Use only compatible microSD cards approved by Nokia for use with icr7o this device Nokia uses approved industry standards for memory mi Pips cards but some brands may not be fully compatible with this device SD Incompatible cards may damage the card and the device and corrupt data stored on the card Keep microSD cards out of the reach of small children You can extend the available memory with a microSD memory card You can insert or remove a microSD card without switching the phone off eX Important Do not remove the memory card in the middle of an operation when the card is being accessed Removing the card in the middle of an operation may damage the memory card as well as the device and da
72. fere with the functionality of inadequately protected medical devices Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy Implanted medical devices Manufacturers of medical devices recommend that a minimum separation of 15 3 centimeters 6 inches should be maintained between a wireless device and an implanted medical device such as a pacemaker or implanted cardioverter defibrillator to avoid potential interference with the medical device Persons who have such devices should e Always keep the wireless device more than 15 3 centimeters 6 inches from the medical device when the wireless device is turned on e Not carry the wireless device in a breast pocket e Hold the wireless device to the ear opposite the medical device to minimize the potential for interference e Turn the wireless device off immediately if there is any reason to suspect that interference is taking place e Read and follow the directions from the manufacturer of their implanted medical device If you have any questions about using your wireless device with an implanted medical device consult your health care provider Hearing aids Some di
73. for example in calculations If you select Automatic the phone selects the language according to the information on your SIM card After you have changed the display text language the phone restarts Writing language to change the writing language of your phone Changing the language affects the characters and special characters available when writing text and the predictive text dictionary used Predictive text to set predictive text input On or Offfor all editors in the phone Select a language for entering predictive text from the list Themes Apply themes See Themes p 58 Voice commands Edit voice command and voice dialing settings See Voice commands p 71 Date and time Time and Date to set the time and date Time zone to set the time zone of your location If you set Network operator time gt Auto update the local time is shown Date format to select the format to display dates Date separator to select the date separator Time format to select between 24 hour and 12 hour time format Time separator to select the time separator Clock type to select whether the analog or digital clock is shown in the standby mode See Clock p 66 Clock alarm tone to select the alarm clock tone Workdays to specify days for alarms repeated only on workdays 73 Network operator time network service to allow the network to update time date and time zone information to your phone If you select Auto
74. ge and select Options gt Objects You can save the file in your phone or send it using Bluetooth technology or as a multimedia message to another compatible device Special message types Your phone can receive many kinds of messages such as operator logos business cards calendar entries and ringing tones To open a received message select Menu gt Messaging gt Inbox and the desired message You can save the special message content to your phone For example to save a received calendar entry to the calendar select Options gt Save to Calendar Note The picture message function can be used only if it is supported by your rs service provider Only compatible devices that offer picture message features can receive and display picture messages The appearance of a message may vary depending on the receiving device 33 Service messages Service messages network service are notifications for example news headlines that may contain a text message or the address of a browser service For availability and subscription contact your service provider My folders You can organize your messages into folders create new folders and rename and delete folders Select Menu gt Messaging gt My folders To create a folder select Options gt New folder and enter a name for the folder E Mailbox Select Menu gt Messaging gt Mailbox When you open Mailbox Connect to mailbox is displayed Select Yes to con
75. gital wireless devices may interfere with some hearing aids If interference occurs consult your service provider E Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems electronic antiskid antilock braking systems electronic speed control systems and air bag systems For more information check with the manufacturer or its representative of your vehicle or any equipment that has been added Only qualified personnel should service the device or install the device in a vehicle Faulty installation or service may be dangerous and may invalidate any warranty that may apply to 104 the device Check regularly that all wireless device equipment in your vehicle is mounted and operating properly Do not store or carry flammable liquids gases or explosive materials in the same compartment as the device its parts or enhancements For vehicles equipped with an air bag remember that air bags inflate with great force Do not place objects including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area If in vehicle wireless equipment is improperly installed and the air bag inflates serious injury could result Using your device while flying in aircraft is prohibited Switch off your device before boarding an aircraft The use of wireless teledevices in an aircraft may be dangerous to the opera
76. he group To remove the personal or group ringing tone select Defau t tone asa ringing tone E Assign speed dialing keys Speed dialing is a quick way to call frequently used numbers You can assign a phone number to the speed dialing keys 2 to 9 The 1 key is reserved for the call mailbox Speed dialing has to be activated before using speed dialing To activate 41 the speed dialing select Menu gt Settings gt Phone sett gt Phone gt Call gt Speed dialling gt On 1 Select Menu gt Contacts and a contact 2 Scroll toa number and select Options gt Assign speed dial Scroll to the desired speed dialing key and select Assign When you return to the contact information view g next to the number indicates the assigned speed dial To call the contact by speed dialing in the standby mode press the speed dialing key and the call key or press and hold the speed dialing key 7 Gallery Use Gallery to save and organize your images videos music tracks sound clips playlists streaming links ram files and presentations Select Menu gt Gallery To open a folder such as mages select it To open a file select it The file opens in its corresponding application The videos you download or transfer to your phone are saved in Videos To access Videos in the standby mode select Videos or select Menu gt Gallery gt Videos or select Menu gt Media gt Videos You can transfer videos to your phone from a
77. home network that is the operator whose SIM card is in your phone 78 Cell info display network service To set the phone to indicate when it is used in a cellular network based on microcellular network MCN technology and to activate cell info reception select On Connection Select Menu gt Settings gt Phone sett gt Connection gt Bluetooth USB Access points Packet data Data call SIP settings Configurations or APN control Bluetooth Switch Bluetooth on or off and edit Bluetooth settings See Bluetooth connection p 84 USB Edit USB settings See USB data cable p 94 Access points To establish a data connection an access point is required You can define different kinds of access points e MMS access point to send and receive multimedia messages e WAP access point to view web pages e Internet access point IAP for example to send and receive e mail Check which kind of access point you need with your service provider for the service you wish to access For availability and subscription to data connection services contact your service provider You may receive access point settings in a message from your service provider or you may have preset access point settings in your phone To create a new access point or edit an existing access point select Options gt New access point or Edit To create a new access point using the settings of an existing access point scroll to an access point and
78. icates the connection is on hold and amp that a connection is available amp A packet data connection is active in a part of the network that supports EGPRS amp indicates the connection is on hold and amp that a connection is available The icons indicate that EGPRS is available in the network but your device is not necessarily using EGPRS in the data transfer 3G A UMTS packet data connection is active 32 indicates the connection is on hold and 38 that a connection is available Bluetooth is switched on Data is being transmitted using Bluetooth See Bluetooth connection p 84 md An infrared connection is active When infrared is active but there is no connection the indicator blinks 4a A USB connection is active Other indicators may also be shown For push to talk indicators see Push to talk p 87 E Menu In the menu you can access the functions in your phone To access the main menu press the menu key hereafter described as select Menu To open an application ora folder scroll to it and press the scroll key To change the menu view select Menu gt Options gt Change Menu viewand a view type If you change the order of the functions in the menu the order may differ from the default order described in this user guide To close an application ora folder select Back and Exit as many times as needed to return to the standby mode or select Options gt Exit To display and switch b
79. ication eX Important Only install and use applications and other software from trusted sources such as applications that are Symbian Signed or have passed the Java Verified testing Before installation in App manager scroll to the installation file and select Options gt View details to view information such as the application type version number and the supplier or manufacturer of the application The jar file is required for installing Java applications If it is missing the phone may ask you to download it To install an application or software package 95 1 Scroll to an installation file Applications on the memory card are indicated with IE 2 Select Options gt nstall Alternatively search the phone memory or the memory card select the application and press the scroll key to start the installation During the installation the phone shows information about the progress of the installation If you are installing an application without a digital signature or certification the phone displays a warning Continue installation only if you are sure of the origins and contents of the application To view extra information about the application scroll to it and select Options gt Go to web address This option may not be available with all applications To see what software packages have been installed or removed and when select Options gt View log Remove an application In the App manager main view
80. ily saves the messages waiting to be sent El Reports network service saves the delivery reports of the text messages special message types such as business cards and multimedia messages you have sent Receiving a delivery report of a multimedia message that has been sent to an e mail address may not be possible WE Write and send messages Your device supports the sending of text messages beyond the character limit fora single message Longer messages are sent as a series of two or more messages Your service provider may charge accordingly Characters that use accents or other marks and characters from some language options take up more space limiting the number of characters that can be sent in a single message The wireless network may limit the size of MMS messages If the inserted picture exceeds this limit the device may make it smaller so that it can be sent by MMS Only devices that have compatible features can receive and display multimedia messages The appearance of a message may vary depending on the receiving device Before you can send and receive an SMS message a multimedia message or an e mail or connect to your remote mailbox you must have the correct connection settings in place See Messaging settings p 36 1 To create a message select Menu gt Messaging gt New message and the message type To create an Audio message see Audio messaging p 32 31 2 Press the scroll key to select the reci
81. in compliance with the MPEG 4 Visual Standard by a consumer engaged in a personal and noncommercial activity and ii for use in connection with MPEG 4 video provided by a licensed video provider No license is granted or shall be implied for any other use Additional information including that related to promotional internal and commercial uses may be obtained from MPEG LA LLC See lt http www mpegla com gt Nokia operates a policy of ongoing development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL INCIDENTAL CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED THE CONTENTS OF THIS DOCUMENT ARE PROVIDED AS IS EXCEPT AS REQUIRED BY APPLICABLE LAW NO WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE MADE IN RELATION TO THE ACCURACY RELIABILITY OR CONTENTS OF THIS DOCUMENT NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE The availability of particular products and applications for these products may vary by region Please check with your Nokia dealer for details and availability of language options This device complies
82. inue to start transferring data If you have used Transfer select Transfer data 2 Select whether to use Bluetooth or infrared for transferring the data When using Bluetooth the phones need to be paired in order to transfer data 94 Depending on the type of the other phone an application may be sent and installed on the other phone to enable the data transfer Follow the instructions 3 Select what content you want to be transferred to your phone 4 Content is transferred to your phone The transfer time depends on the amount of data You can stop the transfer and continue later 16 Data manager E Application manager You can install two types of applications and software to your phone J2ME applications based on Java technology with the extension jad amp or jar PersonalJava applications cannot be installed on your phone amp Other applications and software suitable for the Symbian operating D system The installation files have the sis extension Only install software specifically designed for your phone Installation files may be transferred to your phone from a compatible computer downloaded during browsing or sent to you in a multimedia message as an e mail attachment or by using Bluetooth You can use Nokia Application Installer in Nokia PC Suite to install an application to your phone or a memory card To open App manager select Menu gt Settings gt Data mgr gt App mgr Install an appl
83. invite someone to a sharing session and that person s phone is turned off or the person is not within UMTS network coverage they do not know that you are sending an invitation However you receive an error message that the recipient cannot accept the invitation Settings A person to person connection is also known as a session initiation protocol SIP connection The SIP profile settings must be configured in your device before you can use Video sharing Ask your service provider for the SIP profile settings and save them in your device Your service provider may send you the settings over the air If you know a recipient s SIP address you can enter it on your contact card for that person Select Menu gt Contacts a contact and Options gt Edit gt Options gt Add 26 detail gt S Por Share view Enter the SIP address in the format sip username domainname you can use an IP address instead of a domain name Share live video To receive a sharing session the recipient must install Video sharing and configure the required settings on their mobile device You and the recipient must both be registered to the service before you can start sharing To receive share invitations you must be registered to the service have an active UMTS connection and be within the UMTS network coverage Live video 1 Whena voice call is active select Options gt Share video gt Live video 2 The phone sends the invitation to the SIP ad
84. iple data connections view details on the amount of data sent and received and end unused connections Select Menu gt Settings gt Connectivity gt Conn mgr Note The actual invoice for calls and services from your service provider may vary depending on network features rounding off for billing taxes and so forth To view connection details scroll to a connection and select Options gt Details To end a connection scroll to the connection and select Options gt Disconnect To end all connections select Options gt Disconnect all E Push to talk Push to talk PTT network service is a real time voice over IP service network service available over a GSM GPRS network PTT provides direct voice communication connected with a single keypress Before you can use the PTT service you must define the PTT access point and PTT settings In PTT communication one person talks while the others listen Speakers take turns responding to each other Only one group member can talk at a time The length of time of each turn is limited 87 Phone calls always take priority over PTT calls Besides the packet data counters the phone registers only one to one calls in the recent calls lists in Log The participants should confirm the reception of any communications where appropriate as there is no other confirmation of whether the recipients have heard the call To check availability and costs and to subscribe to the servic
85. key To fast forward or rewind the video press the fast forward or rewind media key To play or pause the video press the play pause stop media key To stop the video press and hold the play pause stop media key Edit images To edit images in Gallery scroll to the image and select Options gt Edit To crop an image select Options gt Apply effect gt Crop To crop the image size manually select Manual ora predefined aspect ratio from the list If you select Manual a cross appears in the upper left corner of the image Scroll to select the area to crop and select Set Another cross appears in the lower right corner Again select the area to be cropped To adjust the first selected area select Back The selected areas form a rectangle which forms the cropped image If you selected a predefined aspect ratio select the upper left corner of the area to be cropped To resize the highlighted area use the scroll key To freeze the selected area press the scroll key To move the area within the picture use the scroll key To select the area to be cropped press the scroll key To reduce redness of the eyes in an image select Options gt Apply effect gt Red eye reduction Move the cross onto the eye and press the scroll key A loop appears on the display To resize the loop to fit the size of the eye scroll up down left or right To reduce the redness press the scroll key Shortcuts in the image editor e To view animage in
86. nd date E Normal operating position Use the phone only in its normal operating position Note As with any radio transmitting device avoid touching an antenna unnecessarily when the antenna is in use For example avoid touching the cellular antenna during a phone call Contact with a transmitting or receiving antenna affects the quality of the radio communication may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life Your device has internal antennas Cellular antenna 1 Bluetooth antenna 2 E Configuration settings Before you can use multimedia messaging instant messaging push to talk e mail synchronization streaming and the browser you must have the proper configuration settings on your phone Your phone may automatically configure browser multimedia messaging access point and streaming settings based on the SIM card used You may also receive the settings directly as a configuration message which you save to your phone For more information on availability contact your service provider or nearest authorized Nokia dealer When you receive a configuration message and the settings are not automatically saved and activated 7 new message is displayed Select Show to open the message To save the settings select Options gt Save You may need to enter a PIN code provided by the service provider 2 Your phone E Keys and parts Power key 1 a
87. nd press within 1 5 seconds To unlock the keypad in music mode select Unlock gt OK 20 When the keypad lock is on calls may be possible to the official emergency number programmed into your device E Connect a compatible headset Do not connect products that create an output signal as this may cause damage to the device Do not connect any voltage source to the Nokia AV connector When connecting any external device or any headset other than those approved by Nokia for use with this device to the Nokia AV connector pay special attention to volume levels E Connect a USB data cable To set the default USB connection mode select Menu gt Settings gt Connectivity gt USB gt USB mode and the desired mode To set whether the default mode is activated automatically select Ask on connection gt No W Attach a wrist strap Connect the wrist strap according to the graphic 3 Call functions E Make a voice call 1 In the standby mode enter the phone number including the area code Press the clear key to remove a number For international calls press twice for the international prefix the character replaces the international access code and enter the country code area code omit the leading zero if necessary and phone number 2 To call the number press the call key To adjust the volume during the call press the volume keys 21 3 To end the call or to cancel the call attempt pr
88. nect to your mailbox network service or No to view previously retrieved e mail messages offline To connect to the mailbox afterwards select Options gt Connect When you create a new mailbox the name you give to the mailbox replaces Mailbox You can have up to six mailboxes When you are online to end the data connection to the remote mailbox select Options gt Disconnect Retrieve e mail messages from the mailbox eX Important Exercise caution when opening messages E mail messages may contain malicious software or otherwise be harmful to your device or PC 1 Select Menu gt Messaging gt Mailbox gt Options gt Connect 2 Select Options gt Retrieve e mail and from the following options New to retrieve all new e mail messages to your phone Selected to retrieve only the e mail messages that have been marked All to retrieve all messages from the mailbox 3 After you retrieve the e mail messages you can continue viewing them online Select Options gt Disconnect to close the connection and to view the retrieved e mail messages and headings offline 34 4 To open an e mail message select it If the e mail message has not been retrieved and you are offline and select Open you are asked if you want to retrieve this message from the mailbox To view e mail attachments indicated with J select Options gt Attachments You can retrieve open or save attachments in supported formats Delete e mail m
89. ng 78 conference call 23 diverting 78 ending 22 international 21 making 21 options during a call 24 rejecting 23 rejecting with SMS 24 speed dial 22 42 swapping 24 voice dial 22 voice mailbox 22 waiting 24 camera 53 camera mode 15 certificates 75 clock 66 connection manager 87 connectivity 84 contacts 40 converter 68 copyright protection See activation keys D data cable 94 data connection indicators 17 data transfer 94 device manager 97 digital rights management See activation keys downloading 64 E editing videos 44 e mail mailbox 34 settings 33 e mail messages deleting 35 retrieving 34 enhancements 74 F file manager 96 Flash Player 58 functional modes 15 107 G gallery 42 transferring videos 45 GPS data 70 H help 20 IM See instant messaging indicators 17 infrared 93 instant messaging connecting 82 contacts 84 conversation 83 groups 82 83 84 settings 82 K keyguard See keypad lock keypad lock 20 L landmarks 71 listening to music 46 log 28 M media player See RealPlayer memory card 97 memory consumption phone memory 97 menu 19 message settings cell broadcast 39 e mail 38 multimedia settings 37 other settings 40 service messages 39 text messages 36 messages audio 32 cell broadcast 36 listening to 40 multimedia objects 33 organizing 34 outbox 31 35 108 receiving 33 sending 31 service commands 36 service messages 34 SIM message
90. ng system or later e Nokia PC Suite 6 82 or later e Nokia Video Manager application a add on application to PC Suite To transfer videos use Nokia Video Manager connect the compatible USB cable or activate Bluetooth connection and select PC Suite as the connection mode To change the default USB connection mode select Menu gt Settings gt Connectivity gt USB gt USB mode Nokia Video Manager is optimized for transcoding and transferring video files For information about transferring video with Nokia Video Manager see the Nokia Video Manager help Download files Select Menu gt Gallery the folder for the file type you want to download and the download function for example mages gt Downl graphics The browser opens Choose a bookmark for the site to download from 45 8 Music player Warning Listen to music at a moderate level Continuous exposure to high volume may damage your hearing Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud To activate music mode and start Music player turn the lower part of the phone to the right so that the playback control keys are on the same side as the display You can listen to music also when the Offline profile is activated See Offline profile p 17 To add songs to your device see Transfer music p 48 For more information about copyright protection see Activation keys p 98 W Listen to mu
91. ns E Speech In Speech you can select the default language and voice used for reading messages and adjust the voice properties such as rate and volume Select Menu gt Settings gt Speech To automatically detect the language of a message and read the message using that language select Language detection gt On When reading a message if there is no voice available for the language or if Language detection is set to Off the default language is used To view details of a voice scroll right scroll to the voice and select Options gt Voice details To test a voice scroll to the voice and select Options gt Play voice E Settings wizard Sett wizard configures your device for operator MMS GPRS and internet and e mail settings based on your service provider Configuring other settings may also be possible To use these services you may have to contact your service provider to activate a data connection or other services Select Menu gt Settings gt Sett wizard E Instant messaging Instant messaging IM allows you to converse with others and join discussion forums IM groups with specific topics network service Check the availability of IM services pricing and tariffs with your service provider Service providers also provide instructions on how to use their services 81 Connect to an IM server Select Menu gt Settings gt IM 1 To log in select Options gt Log in 2 Enter your user ID an
92. o the start page or Zoom the page in or out Mini map Mini map helps you navigate web pages that contain large amount of information Set Mini map on in browser settings See Browser settings p 65 Scroll through a large web page and Mini map opens and displays an overview of the web page you are browsing To move in Mini map scroll When you stop scrolling Mini map disappears and the area outlined in Mini map is displayed Page overview With Page overview you can move more quickly to the desired part of a web page Page overview may not be available on all pages To show the page overview of the current page press 8 To find the desired spot on the page scroll up or down Press 8 again to zoom in and view the desired section of the page Web feeds and blogs Web feeds are xml files on web pages that are widely used to share the latest entry headlines or full text for example recent news in the form of news feeds Blogs or weblogs are web diaries Most of the web feeds use RSS and ATOM technologies 63 The browser automatically detects if a web page contains web feeds To subscribe to a web feed select Options gt Subscribe and a feed or click on the link To view the web feeds you have subscribed to in the bookmarks view select Web feeds To update a web feed select it and Options gt Refresh To define how the web feeds are updated select Options gt Settings gt Web feeds Saved pages You can sa
93. o turn off the alarm Select Snooze to stop the alarm for 5 minutes after which it resumes If the alarm time is reached while the device is switched off the device switches itself on and starts sounding the alarm tone If you select Stop the device asks whether you want to 66 activate the device for calls Select No to switch off the device or Yes to make and receive calls Do not select Yes when wireless phone use may cause interference or danger World clock To open the world clock view scroll right to World To add cities to the list select Options gt Add city To set your current city scroll to a city and select Options gt Set as current city The city is displayed in the clock main view and the time in your device is changed according to the city selected Check that the time is correct and matches your time zone E Calendar Select Menu gt Organiser gt Calendar In the calendar you can keep track of your appointments meetings birthdays anniversaries and other events You can also set a calendar alarm to remind you of upcoming events Create calendar entries 1 Select Options gt New entry and an entry type Anniversary entries are repeated every year 2 Fill in the fields Repeat Press the scroll key to change the entry to be repeated A repeating entry is indicated by in the day view Repeat unti Set an ending date for the repeated entry for example the last date of a weekly c
94. o wait before capturing the image Press the scroll key and the timer starts To adjust the white balance or color tone select Options gt Adjust gt White balance or Colour tone To record a video select Options gt Video mode or scroll right amp on the upper left of the display indicates the video mode To start the recording press the capture key or the scroll key To pause the recording press the capture key To stop the recording press and hold the capture key To use the panorama mode select Options gt Panorama mode or scroll right lt on the upper left of the display indicates the panorama mode Press the capture key to start capturing a panorama image The panorama preview is shown on the display Turn slowly to the right or left You cannot change the direction You turn too fast if the arrow on the display is red To stop the panorama press the capture key again 53 Camera settings Your device supports an image capture resolution of 1600 x 1200 pixels You can change camera settings for still images In the camera mode select Options gt Settings gt Image and from the following settings Image quality and Image resolution The better the image quality and the higher the resolution the more memory the image consumes Show captured image To not display the image after capturing select No Default image name Change how the captured images are named Memory in use Select whether you want
95. obtain the password from your service provider If you enter an incorrect barring password three times in succession the password is blocked Contact your service provider WE Nokia support and contact information On the web site you can get information on the use of Nokia products and services If you need to contact customer service check the list of local Nokia contact centers at www nokia com customerservice For maintenance services check your nearest Nokia service center at www nokia com repair Software updates Nokia may produce software updates that may offer new features enhanced functions or improved performance You may be able to request these updates through the Nokia Software Updater PC application To update the device software you need the Nokia Software Updater application and a compatible PC with Microsoft Windows 2000 or XP operating system broadband internet access and a compatible data cable to connect your device to the PC To get more information and to download the Nokia Software Updater application visit www nokia com softwareupdate or your local Nokia web site 1 Get started W Insert a U SIM card and battery Always switch the device off and disconnect the charger before removing the battery This phone uses BP 5M batteries For availability and information on using SIM card services contact your SIM card vendor This may be the service provider or other vendor 1 To open the back cover o
96. odes ai i Nokia support and contact information 9 1 Get Started 1 Insert a U SIM card and battery MicroSD card slot Charge the battery Switch the phone on and off Set time and date Normal operating position Configuration Settings 3 2 Your phone Keys and parts 15 Standby mode 16 Indicators 17 Menu 19 9 Welcome application Tutorial Volume control Keypad lock keyguard Connect a compatible headset Connect a USB data cable Attach a wrist strap 3 Call functions Make a voice call Answer or reject a call Make a video call Answer a video call Video sharing Traditional text input Predictive text input ees Copy and delete text eee 30 5 Messaging Write and send messages Inbox receive messages My folders Mailbox hi Outbox isi View messages on the SIM card Cell broadcast Service command editor Messaging settings Message reader 6 Contacts Manage contacts Manage contact groups Add a ringing tone Assign speed dialing keys 7 Gallery Gallery functions 8 Music player 46 Listen to music 46 Music menu Playlists Music shop 48 TASTER MUSIC aniani 48 RealPlayer de Flas M RlayE Tid a aaien eean Profiles 3 D tones Calculator Converter 14 Settings
97. older in your phone 1 Select Menu gt Messaging gt Options gt S M messages 2 Mark the messages you want to copy 3 To copy the marked messages select Options gt Copy and the folder to which you want to copy the messages E Cell broadcast You may be able to receive messages such as weather or traffic conditions from your service provider network service To turn on the service see Ce broadcast in Cell broadcast settings p 39 Select Menu gt Messaging gt Options gt Cell broadcast A packet data connection may prevent cell broadcast reception E Service command editor To enter and send service commands also known as USSD commands such as activation commands for network services to your service provider select Menu gt Messaging gt Options gt Service command To send the command select Options gt Send E Messaging settings Text message settings Select Menu gt Messaging gt Options gt Settings gt Text message and from the following options Message centres lists all the defined message centers Message centre in use defines which message center is used for delivering text messages and special message types such as business cards Character encoding gt Full support to select all characters in the message to be sent as viewed If you select Reduced support characters with accents and other marks may be converted to other characters Receive report network service
98. ologram 1 When looking at the hologram on the label you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle 2 When you angle the hologram left right down and up you should see 1 2 3 and 4 dots on each side respectively 3 Scratch the side of the label to reveal a 20 digit code for example 123456789 19876543210 Turn the battery so that the numbers are facing upwards The 20 digit code reads starting from the number at the top row followed by the bottom row 4 Confirm that the 20 digit code is valid by following the instructions at www nokia com batterycheck To create a text message enter the 20 digit code for example 123456789 19876543210 and send to 44 7786 200276 National and international operator charges will apply You should receive a message indicating whether the code can be authenticated 101 What if your battery is not authentic If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery please do not use the battery Take it to the nearest authorized Nokia service point or dealer for assistance The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements It may also invalidate any approval or warranty applying to the device To find out more about original Nokia batteri
99. only removes it from the playlist 47 To reorder songs in a playlist scroll to the song you want to move and select Options gt Reorder list gt Grab scroll to a new position and select Drop Music shop In the music shop network service you can search browse and purchase music for downloading to your phone The variety and appearance of music shop services may vary For more information and availability of music shop contact your service provider You must have music shop settings and valid internet connections in order to use this service For more details see Music shop settings p 48 and Access points p 79 To go to music shop in the Music player select Options gt Go to Music shop Music shop settings The availability and appearance of the music shop settings may vary The settings may also be predefined and you cannot edit them In the music shop you may be able to edit the settings by selecting Options gt Settings If the settings are not predefined you may be asked to enter the following settings Address You must define the web address of the music shop service Default acc pt Select the access point to use when connecting to the music shop Username Enter your user name for the music shop Password Enter your password for the music shop If Username and Password fields are left empty you may have to enter them at login E Transfer music You can buy music pr
100. or during an emergency so you should not rely solely upon voice dialing in all circumstances 1 In the standby mode press and hold the right selection key A short tone is played and Speak now is displayed If you are using a compatible headset with the headset key press and hold the headset key 22 2 Speak the voice command clearly The phone plays the voice command of the best match After 1 5 seconds the phone dials the number if the result is not the correct one before dialing select Next and another entry Using voice commands to carry out a phone function is similar to voice dialing See Voice commands p 71 Make a conference call network service 1 Make a call to the first participant 2 To make a call to another participant select Options gt New call The first call is automatically put on hold 3 To join the first participant in the conference call when the new call is answered select Options gt Conference To add a new person to the call repeat step 2 and select Options gt Conference gt Add to conference The phone supports conference calls between a maximum of six participants including yourself 4 To have a private conversation with one of the participants select Options gt Conference gt Private Select a participant and Private The conference call is put on hold on your phone The other participants can still continue the conference call To return to the conference call select O
101. ory card When a memory card is formatted all data on the card is permanently lost Some memory cards are supplied preformatted and others require formatting 1 Select Options gt Format memory card 2 Select Yes to confirm 3 When formatting is complete enter a name for the memory card Back up and restore information To back up information from phone memory to the memory card select Options gt Back up phone memory To restore information from the memory card to the phone memory select Options gt Restore from card You can only back up the phone memory and restore it to the same phone Lock the memory card To set a password to help prevent unauthorized use select Options gt Set password You are asked to enter and confirm your password The password can be up to eight characters long Unlock a memory card If you insert another password protected memory card into your phone you are prompted to enter the password of the card To unlock the card select Options gt Unlock memory card Check memory consumption To check the memory consumption and the amount of memory available on your memory card select Options gt Memory details E Activation keys Digital rights management Content owners may use different types of digital rights management DRM technologies to protect their intellectual property including copyrights This device uses various types of DRM software to access DRM protected content
102. otected with WMDRM from online music shops and transfer the music to your phone To transfer music from a compatible PC or other compatible devices use a compatible USB cable or Bluetooth connectivity You can also use IR connection 48 For details see Bluetooth connection p 84 or Infrared p 93 You cannot transfer WMDRM protected music files using Bluetooth or IR connection To refresh the library after you have updated the song selection in your phone in the Music menu select Options gt Refresh Music library The requirements of the PC for music purchase and transfer e Microsoft Windows XP operating system or later e Compatible version of Windows Media Player application e Nokia PC Suite 6 82 or later Transfer music from PC You can use three different methods to transfer music e To view your phone on a PC as an external hard drive where you can transfer any data files make the connection with a compatible USB cable or Bluetooth connectivity If you are using the USB cable select Data transfer as the connection mode A compatible memory card needs to be inserted in the phone You cannot transfer WMDRM protected music files using Data transfer e To synchronize music with Windows Media Player connect the compatible USB cable and select Media player as the connection mode A compatible memory card needs to be inserted in the phone e To use Nokia Music Manager in Nokia PC Suite connect the compatible USB c
103. other device Wait a few seconds until an infrared connection is established 3 To send locate the desired file in an application or the file manager and select Options gt Send gt Via infrared If data transfer is not started soon after the activation of the infrared port the connection is cancelled and must be started again All items received through infrared are placed in the nbox folder in Messaging E Modem Before you can use your phone as a modem e Acquire the appropriate data communications software for your computer e Subscribe to the appropriate network services from your service provider or internet service provider e Install the appropriate drivers on your computer Select Menu gt Settings gt Connectivity gt Modem To connect the phone to a compatible computer using infrared press the scroll key Make sure the infrared ports of the phone and computer are directly facing each other with no obstacles between them To connect your phone to a computer using Bluetooth wireless technology initiate the connection from the computer To activate Bluetooth in your phone select Menu gt Connectivity gt Bluetooth gt Bluetooth gt On 93 If you use a cable to connect your phone to a computer initiate the connection from the computer Note that you may not be able to use some of the other communication features when the phone is used as a modem E USB data cable You can use the USB data cable to tr
104. ourse you are taking This option is shown only if you have selected to repeat the event Synchronisation gt Private After synchronization the calendar entry can be seen only by you and it is not shown to others even if they have online access to view the calendar Public The calendar entry is shown to others who have access to view your calendar online Vone The calendar entry is not copied when you synchronize your calendar 3 To save the entry select Done 67 Calendar views Press in the month week or day views to automatically highlight the current date To create a meeting entry press any number key 0 9 in any calendar view To go to a certain date select Options gt Go to date Write the date and select OK To do Select Options gt To do view In the To do view you can keep a list of tasks that you need to do Create a to do note 1 To start to write a to do note press any number key 0 9 2 Write the task in the Subject field Set a due date and a priority for the task 3 To save the to do note select Done E Notes Select Menu gt Organiser gt Notes To write a new note start writing To save the note select Done You can save plain text files txt format you receive to Notes W Calculator Select Menu gt Organiser gt Calculator 1 Enter the first number of your calculation 2 Scroll to an arithmetic function and select it 3 Enter the second number 4 To execute th
105. pic numbers in received cell broadcast messages select On 39 Other settings Select Menu gt Messaging gt Options gt Settings gt Other and from the following settings Save sent messages Select to save a copy of every sent text message multimedia message or e mail to the Sent folder Number of saved msgs Define how many sent messages are saved to the sent items folder at a time When the limit is reached the oldest message is deleted Memory in use Select whether to save messages to the phone memory or memory card E Message reader With Msg reader you can listen to received text multimedia and e mail messages To listen to a message in nbox or Mailbox scroll to the message or mark the messages and select Options gt Listen To skip to the next message scroll down sty Tip When 7 new message or New e mail is displayed in the standby mode to listen to the received messages press and hold the left selection key until Msg reader starts 6 Contacts You can save and manage contact information such as names phone numbers and addresses E Manage contacts Select Menu gt Contacts To add a new contact select Options gt New contact Fill in the fields you want and select Done To edit a contact scroll to it and select Options gt Edit To assign default numbers and addresses to a contact select it and select Options gt Defaults Scroll to the desired default option and select
106. pients or groups from Contacts or enter the phone number or e mail address of the recipient in the To field Separate recipients with a semicolon 3 When creating an e mail or multimedia message scroll down to the subject field and write the message subject 4 Scroll down to the message field and write the message When you write text messages the message length indicator shows how many characters you can enter in the message For example 10 2 means that you can still add 10 characters for the text to be sent as two separate text messages To use a template for the text message select Options gt nsert gt Template To create a presentation based on a template to be sent as a multimedia message select Options gt Create presentation To use a text template for the multimedia message select Options gt nsert object gt Template To add a media object to a multimedia message select Options gt nsert object gt Image Sound clip or Video clip To create and add a new media object select Options gt nsert new gt Image Sound clip Video clip or Slide When sound is added 2J is shown To add a media object to an e mail select Options gt nsert gt Image Sound clip Video clip Note Other or Template 5 To send the message select Options gt Send Audio messaging Audio messages are multimedia messages that consist of a single sound clip To create and send an audio message 1 Select Menu gt Me
107. pplication to find and call local restaurants and shops and use the advanced mapping technology to assist you in finding their location Select Menu gt Web gt Search 60 When you open Mobile Search a list of categories is displayed Select a category for example images and enter your text into the search field Select Search The search results are displayed on the screen For additional help and instructions on the application select Options gt Help For more information on the application visit also www mobilesearch nokia com E Web To browse web pages written in XHTML WML or HTML select Menu gt Web gt Browser or press and hold O in the standby mode Check the availability of services pricing and tariffs with your service provider Service providers also give you instructions on how to use their services Set up the phone for the browser service Your device may configure the WAP or internet access point automatically based on your SIM card You can use Settings wizard to configure WAP or internet access point settings See Settings wizard p 81 You may receive service settings in a configuration message from the service provider To define an access point manually see Access points in Connection p 79 Make a connection To access web pages do the following e Select the home page of your service provider e Select a bookmark from the bookmarks view e Inthe bookmarks vie
108. profile select the profile and Activate iz Tip To quickly change to Silent profile from any other profile in the j standby mode press and hold To personalize a profile select the profile Personalise and from the following options Ringing tone To set the ringing tone for voice calls choose a ringing tone from the list Press any key to stop the sound You can also change ringing tones in contacts See Add a ringing tone p 41 Video call tone Select the ringing tone for video calls Say caller s name Select On to have the phone say the caller s name when the phone is ringing Ringing type When Ascending is selected the ringing volume starts from level one and increases level by level to the set volume level Ringing volume Set the volume level for the ringing and message alert tones Message alert tone Set the alert tone for text and multimedia messages E mail alert tone Set the alert tone for e mail messages Vibrating alert Set the phone to vibrate to alert for incoming calls and messages Keypad tones Set the volume level for keypad tones Warning tones Activate or deactivate warning tones Alert for Set the phone to ring only upon calls from phone numbers that belong to a selected contact group Phone calls coming from people outside the selected group have a silent alert 59 Profile name Name the profile This setting is not shown for the General and Offline profiles When using the
109. ptions gt Add to conference 5 To drop a participant select Options gt Conference gt Drop participant scroll to the participant and select Drop 6 To end the conference call press the end key E Answer or reject a call To answer a call press the call key To adjust the volume during the call press the volume keys To mute the ringing tone select Silence SW Tip Ifa compatible headset is connected to the phone press the 795 headset key to answer and end a call To reject the call press the end key or select Options gt Reject The caller hears a busy tone If you have activated the Call divert option If busy to divert calls rejecting the call diverts the call 23 To send a text message to the caller informing why you cannot answer the call select Options gt Send text message You can activate the text message reply and edit the text in the message See Reject call with SMS and Message text in Call p 77 Call waiting network service During a call to answer the waiting call press the call key The first call is put on hold To end the active call press the end key To activate the Call waiting function select Menu gt Settings gt Phone sett gt Phone gt Call gt Call waiting gt Activate To switch between the two calls select Swap Options during a call Many of the options that you can use during a call are network services For availability contact your service provider
110. ptions gt Call gt Video call Starting a video call may take a while Waiting for video image is shown If the call is not successful for example video calls are not supported by the network or the receiving device is not compatible you are asked if you want to try a normal call or send a message instead The video call is active when you see two video images and hear the sound through the loudspeaker The call recipient may deny video sending in which case you hear the sound and may see a still image or a grey background graphic During video calls while the phone is in phone mode turn the lower part of the phone so that the camera lens is pointing toward you to let the call recipient to see your face or turn the lower part to opposite direction to show the view away from you To increase or decrease the volume during a call press the volume keys To change between showing video or only hearing sound select Enable or Disable gt Sending video Sending audio or Sending aud amp video To zoom your own image select Zoom in or Zoom out The zoom indicator is shown on the top of the display To switch the places of the sent and received video images on the display select Change image order Even if you have denied video sending during a video call the call will still be charged as a video call Check the pricing with your network operator or service provider To end the video call press the end key E Answer a video
111. r for more information about how your phone complies with government regulations on location based emergency calling services GPS data is a GPS application that enables you to view your current location find your way to a desired location and track distance The application requires a Bluetooth GPS enhancement to operate You must also have Bluetooth GPS positioning method enabled in Menu gt Settings gt Phone sett gt General gt Positioning gt Positioning methods Select Menu gt Applications gt My own gt GPS data In GPS data and Landmarks coordinates are expressed in degrees and decimal degrees format using WGS 84 coordinate system 70 Landmarks Landmarks are coordinates to geographic locations that you can save to your device for later use in different location based services You can create landmarks using a Bluetooth GPS enhancement or network network service Select Menu gt Applications gt My own gt Landmarks 14 Settings E Voice commands To select the functions to use by voice command select Menu gt Settings gt Voice comm The voice commands for changing profiles are in the Profiles folder To activate a new voice command for an application select Options gt New application and the application To manage the voice commands scroll to a function select Options and from the following options Change command or Remove application to change or deactivate the voice command of the sel
112. roll up or down 2 To copy the text to the clipboard press and hold and at the same time select Copy If you want to delete the selected text from the document press the clear key 3 To insert the text scroll to the insertion point press and hold and at the same time select Paste 5 Messaging You can create send receive view edit and organize text messages multimedia messages e mail messages presentations and documents You can also receive messages and data using Bluetooth wireless technology receive and forward picture messages receive service messages and cell broadcast messages and send service commands 30 To open the Messaging menu select Menu gt Messaging You can see the New message function and a list of default folders nbox contains received messages except e mail and cell broadcast messages E mail messages are saved in the Mailbox folder To read cell broadcast messages select Options gt Cell broadcast 4 My folders for organizing your messages into folders g Mailbox for connecting to your remote mailbox to retrieve your new e mail messages or viewing your previously retrieved e mail messages offline After you define settings for a new mailbox the name given to that mailbox is displayed instead of Mailbox eS Drafts saves draft messages that have not been sent 2 Sent saves the messages that are sent excluding messages sent using Bluetooth amp Outbox temporar
113. s 36 special message types 33 writing 31 mobile browser See web mobile search 60 modem 93 movies muvees custom muvees 54 quick muvees 54 music mode 16 music player downloading music 48 music shop 48 playlists 47 transferring music 48 music See music player N network 78 notes 68 0 one touch dial See speed dial P phone mode 15 phonebook See contacts profiles 59 PTT See push to talk push to talk 87 91 R RealPlayer 57 recorder 56 ringing tones add to contacts 41 selecting 59 three dimensional 60 video ringing tones 42 S services See web settings connection 79 data call 80 date 73 enhancements 74 packet data 80 phone 72 phone language 73 predictive text input 73 security 74 Setting wizard 81 speech 81 time 73 writing language 73 SIM card using phone without a SIM card 17 songs transferring 48 speed dial assigning a number 41 72 calling 22 changing a number 72 deleting a number 72 standby mode 16 synchronization 91 T text input 73 copying text 30 deleting text 30 predictive 29 themes 58 to do 68 transferring music 48 transferring videos 45 tutorial 19 U USB See data cable V video call 24 25 video call mode 16 video view mode 16 videos transferring 45 Visual Radio 50 voice commands 71 voice dialing 22 voice mailbox 71 voice recorder See recorder volume 20 W web blogs 63 bookmarks 61 browser settings 65 browsing 62
114. scroll to the software package and select Options gt Remove Application manager settings In App manager select Options gt Settingsand from the following settings Software installation to select if you want to allow installation of all Symbian applications A or only signed applications Signed only Online certificate check to select if you want App manager to check the online certificates for an application before installing it Default web address default address used when checking online certificates Java applications may attempt to for example establish a data connection or send a message To edit the permissions of an installed Java application and define which access point the application will use in the main view scroll to the application and select Options gt Open E File manager In the file manager you can browse open and manage files and folders in the phone memory or on the memory card 96 To see a list of the folders in the phone memory select Menu gt Settings gt Data mgr gt File mgr Scroll right to see the folders on the memory card View memory consumption Scroll either right or left to view the phone memory or the memory card contents To check memory consumption of the current memory select Options gt Memory details The phone calculates the approximate amount of free memory for storing data and installing new applications In the memory views you can view the m
115. select Options gt Play in background Station list When the radio is on select Options gt Stations The station list is used for managing the saved radio stations Station setup Scroll to a station in the station list press the scroll key and select Edit to change the station parameters View visual content To check availability and costs and to subscribe to the service contact your service provider To view visual content of the current station select E If the visual service ID was not saved in the station list you are asked for the visual service ID Enter the visual service ID and select OK If you do not have the visual service ID select Retrieve to access the station directory network service To end the visual content feed but not the FM radio select Close To set light settings and the power saver time out select Options gt Display settings Visual Radio settings When the radio is on select Options gt Settings and the following Start up tone to enable or disable the start up tone Auto start service to enable or disable the automatic display of visual content Access point to select the access point 51 Station directory With the station directory network service you can select Visual Radio enabled or traditional radio stations from a list grouped in folders To check availability and costs and to subscribe to the service contact your service provider Access from the vis
116. shows the music available in the phone and compatible memory card if inserted A songs lists all music To view sorted songs select A bums Artists Genres or Composers To view playlists select Playlists To refresh the library after you have updated the song selection in your phone select Options gt Refresh Music library Playlists To view and manage playlists in the music menu select Playlists The following playlists appear automatically Most played tracks Recently played songs and Recent additions To view details of the playlist select Options gt Playlist details Create a playlist 1 Select Options gt Create playlist 2 Enter a name for the playlist and select OK 3 Select artists to find the songs you want to include in the playlist Press the scroll key to add items To show the song list under an artist title scroll right To hide the song list scroll left 4 When you have made your selections select Done If a compatible memory card is inserted the playlist is saved to the memory card To add more songs later when viewing the playlist select Options gt Add songs To add songs albums artists genres and composers to a playlist from the different views of the music menu select an item and Options gt Add toa playlist gt Saved playlist or New playlist To remove a song from a playlist select Options gt Remove from playlist This deletion does not delete the song from the phone it
117. sic 1 Activate the music mode 2 In Music menu select the category such as All songs or Albums 3 Select the music you want to play Use the media keys to control playback e Press the play pause stop key to play or pause a song Press and hold the key to stop the playback e Press the rewind key to rewind the song or to skip backwards e Press the fast forward key to fast forward the song or to skip forward You can also use the scroll key to control the player To adjust the volume use the volume key To switch random play amp on or off select Options gt Shuffle To repeat the current song pm all songs BJ or to switch repeat off select Options gt Repeat To modify the tone of the music playback select Options gt Equaliser To modify the balance loudness or stereo widening select Options gt Audio settings To view a visualization during playback select Options gt Start visualisation To return to the standby mode and leave the player in the background press the end key If Active standby is On the currently playing song is displayed in the 46 standby mode To access the music player from the standby mode select the currently playing song To switch to another open application press and hold Menu E Music menu To select more music to play in Now playing view select Options gt Go to Music menu To return to the Now playing view select Options gt Go to Now playing The music menu
118. ssaging gt New message gt Audio message 2 Inthe Jo field press the scroll key to choose the recipients from Contacts or enter the phone number or e mail address Scroll down to the message field 3 To record a new sound clip press the scroll key or select Options gt nsert sound clip gt New sound clip The recording starts To use a previously recorded sound clip select Options gt nsert sound clip gt From Gallery scroll to the sound clip and select it The sound clip has to be in amr format To play the sound clip select Options gt Play sound clip 4 To send the message select Options gt Send 32 E mail settings Before you use e mail you must do the following e Configure an internet access point IAP correctly See Connection p 79 e Define your e mail settings correctly See E mail settings p 33 Follow the instructions given by your e mail service provider and internet service provider E Inbox receive messages Select Menu gt Messaging gt Inbox When there are unread messages in the inbox the icon changes to e To open a received message select Menu gt Messaging gt Inbox and the desired message es Important Exercise caution when opening messages Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC View multimedia objects To view the list of media objects that are included in the multimedia message open the messa
119. t Create new Enter a Channel name Select a Channel privacy level Enter your own nickname in Nickname oOo 7 ON If you want to add a thumbnail image to the group select Thumbnail and an image 7 Select Done When you have created a channel you are asked if you want to send channel invitations Channel invitations are text messages 90 Join a preconfigured channel A preconfigured channel is a talk group that is set up by your service provider Only preconfigured users are allowed to join and use the channel 1 Select Options gt PTT channels 2 Select Options gt New channel gt Add existing 3 Enter the Channel name Channel address and Nickname You can also add a Thumbnail 4 Select Done Respond to a channel invitation To save a received channel invitation select Options gt Save channel The channel is added to your PTT contacts channels view PTT sessions PTT sessions are displayed as call bubbles in the PTT display giving information about the status of the PTT sessions Wait shown when you press and hold the call key and somebody else is still speaking in the PTT session Tal k shown when you press and hold the call key and get the permission to speak To switch the loudspeaker on or off select Options gt Activate loudspeaker or Deactivate loudspeaker To disconnect the selected PTT session select Options gt Disconnect E Remote synchronization Sync enables you to synchroni
120. t Options gt Disable To define the positioning server access point select Positioning server gt Access point and the desired access point Then select Server address and enter the domain name or URL address of the server 76 Phone Select Menu gt Settings gt Phone sett gt Phone and Call Call divert Call barring or Network Call Send my caller ID network service to set your phone number to be displayed Yes or hidden No from the person whom you are calling The value may be set by your service provider when you subscribe to the service Set by network Call waiting network service to set the network to notify you of a new incoming call while you have a call in progress To request the network to activate call waiting select Activate To request the network to deactivate call waiting select Cancel To check whether the function is active select Check status Reject call with SMS to enable rejecting phone calls with a text message See Answer or reject a call p 23 Message text to enter a text to be sent when you reject a call with a text message Image in video call to select a still image to be shown instead of the video when you deny video sending ina video call Automatic redia to set the phone to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt Press the end key to stop automatic redialing Show call duration to set the phone to display the
121. t use the device at a refueling point Do not use near fuel or chemicals SWITCH OFF NEAR BLASTING Follow any restrictions Do not use the device where blasting is in progress USE SENSIBLY Use only in the normal position as explained in the product documentation Do not touch the antenna unnecessarily QUALIFIED SERVICE Only qualified personnel may install or repair this product ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries Do not connect incompatible products WATER RESISTANCE Your device is not water resistant Keep it dry BACK UP COPIES Remember to make back up copies or keep a written record of all important information stored in your device CONNECTING TO OTHER DEVICES When connecting to any other device read its user guide for detailed safety instructions Do not connect incompatible products EMERGENCY CALLS Ensure the phone function of the device is switched on and in service Press the end key as many times as needed to clear the display and return to the standby mode Enter the emergency number then press the call key Give your location Do not end the call until given permission to do so E About your device The wireless device described in this guide is approved for use on the GSM 850 900 1800 and 1900 and UMTS 2100 networks Contact your service provider for more information about networks When using the features in this device obey all laws and respect local customs priv
122. ta stored on the card may be corrupted Insert a microSD card Note that the memory card may be supplied with the phone and may already be inserted 1 Open the side door 1 2 Place the microSD card in the slot with the golden contact area facing down 2 Push the card gently to lock it into place 3 Close tight the side door 3 Remove a microSD card 1 Open the side door 2 Push the card gently to release it Remove memory card and press OK is displayed Pull the card out and select OK 3 Close tight the side door E Charge the battery 1 Connect the charger to the wall socket 2 Open the side door 1 and connect the charger plug to the charger connector in the phone 2 3 After charging close tight the side door If the battery is completely discharged it may take a few minutes before the charging indicator appears on the display or before any calls can be made The charging time depends on the charger and the battery used Charging a BP 5M battery with the AC 5 charger takes approximately 80 minutes E Switch the phone on and off Press and hold the power key If the phone asks for a PIN code enter the PIN code and select OK If the phone asks for the lock code enter the lock code and select OK The factory setting for the lock code is 12345 E Set time and date 0 To set the correct time zone time and date select the country you are presently in then enter the local time a
123. th Some networks may require that a valid SIM card is properly inserted in the device 2 Press the end key as many times as needed to clear the display and ready the device for calls 3 Enter the official emergency number for your present location Emergency numbers vary by location 4 Press the call key If certain features are in use you may first need to turn those features off before you can make an emergency call If the device is in the offline profile mode you may need to change 105 the profile to activate the phone function before you can make an emergency call Consult this guide or your service provider for more information When making an emergency call give all the necessary information as accurately as possible Your wireless device may be the only means of communication at the scene of an accident Do not end the call until given permission to do so E Certification information SAR THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile device is a radio transmitter and receiver It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons regardless of age and health The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR Th
124. the gateway and the content server To view details about the connection encryption status and information about server authentication select Options gt Tools gt Page info Security features may be required for some services such as banking services For such connections you need security certificates For more information contact your service provider See also Certificate management p 75 Browse web pages Keys and commands for browsing To opena link make selections or check boxes press the scroll key To go to the previous page while browsing select Back If Back is not available select Options gt Navigation options gt History to view a chronological list of the pages visited during a browsing session To choose the desired page scroll left or right and select it The history list is cleared each time a session is closed To save a bookmark while browsing select Options gt Save as bookmark 62 To retrieve the latest content from the server select Options gt Navigation options gt Reload To open the browser toolbar scroll to an empty part of the page and press the scroll key Keypad shortcuts while browsing 1 Open your bookmarks 2 Search for keywords in the current page 3 Return to the previous page 5 List all open windows 8 Show the page overview of the current page Press 8 again to zoom in and view the desired section of the page 9 Enter a new web address 0 Go t
125. the offline mode The FM radio depends on an antenna other than the wireless device antenna A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly Warning Listen to music at a moderate level Continuous exposure to high volume may damage your hearing Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud You can make a call or answer an incoming call while listening to the radio The radio is muted when there is an active call To open Visual Radio select Menu gt Media gt Radio To turn the radio off select Exit Tune and save a radio station To start the station search when the radio is on select or Searching stops when a station is found To save the station select Options gt Save station Select a location for the station Enter the name of the station and select OK Radio functions To adjust the volume press the volume keys Select E or M to scroll to the next or previous saved station The buttons are inactive if there are no saved stations 50 When using a compatible headset press the headset key to scroll to the next saved radio station To save the current station select Options gt Save station a preset position and enter the station name To set the station frequency manually select Options gt Manual tuning To listen to the radio in the background and go to the standby mode
126. the sustainable reuse of material resources Collection information is available from the product retailer local waste authorities national producer responsibility organizations or your local Nokia representative For more information see product Eco Declaration or country specific information at www nokia com Additional safety information Small children Your device and its enhancements may contain small parts Keep them out of the reach of small children E Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2 2 centimeters 7 8 inches away from the body When a carry case belt clip or holder is used for body worn operation it should not contain metal and should position the device the above stated distance from your body To transmit data files or messages this device requires a quality connection to the network In some cases transmission of data files or messages may be delayed until such a connection is available Ensure the above separation distance instructions are followed until the transmission is completed 103 Parts of the device are magnetic Metallic materials may be attracted to the device Do not place credit cards or other magnetic storage media near the device because information stored on them may be erased HM Medical devices Operation of any radio transmitting equipment including wireless phones may inter
127. tion of the aircraft disrupt the wireless telephone network and may be illegal E Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death Switch off the device at refueling points such as near gas pumps at service stations Observe restrictions on the use of radio equipment in fuel depots storage and distribution areas chemical plants or where blasting operations are in progress Areas with a potentially explosive atmosphere are often but not always clearly marked They include below deck on boats chemical transfer or storage facilities vehicles using liquefied petroleum gas such as propane or butane and areas where the air contains chemicals or particles such as grain dust or metal powders E Emergency calls Important Wireless phones including this device operate using radio signals es wireless networks landline networks and user programmed functions Because of this connections in all conditions cannot be guaranteed You should never rely solely on any wireless device for essential communications like medical emergencies To make an emergency call 1 Ifthe device is not on switch it on Check for adequate signal streng
128. to save your images in the phone memory or on the memory card You can change camera settings for videos In the camera mode select Options gt Settings gt Video and from the following settings Length If set to Maximum the length of the recorded video is only restricted by the available memory If set to Short the recording time is optimized for MMS sending Video resolution Select the video resolution Default video name Select how the video clips are named Memory in use Select whether you want to save your video clips in the phone memory or on the memory card E Movie director A muvee is a short edited video clip that can contain video images music and text Quick muvee is created automatically by Movie director after you select the style for the muvee Movie director uses the default music and text associated with the chosen style In a custom muvee you can select your own video and music clips images and style and add an opening and closing message You can send muvees with MMS A muvee can be saved in Gallery in 3gp file format To create muvees select Menu gt Media gt Movie Mark images and videos and select Options gt Create muvee 54 Create a quick muvee 1 To create a quick muvee select Menu gt Media gt Movie Select the videos for the muvee and scroll right to select the images and select Options gt Create muvee Select a style for the muvee from the style list Creat
129. ual content view To retrieve the visual service ID and to start visual content for the currently tuned radio station select and Retrieve After the connection to the station directory is established select the nearest location to your current position from a list of folders and press the scroll key The device compares the frequencies of the listed radio stations with the currently tuned in frequency If a matching frequency is found the visual service ID of the tuned radio station is displayed Select OK to start viewing the visual content If there is more than one radio station with matching frequencies the radio stations and their visual service ID are displayed in a list Select the desired radio station The tuned radio station and the visual service ID are displayed Select OK to start viewing the visual content Access from options To access the station directory network service from the station list select Options gt Station directory After the connection to the station directory select the nearest location to your current position from a list of locations Radio stations that provide visual content are indicated with w Select the desired radio station and from the following options Listen to tune to the highlighted radio station To confirm the frequency setting select Yes Start visual service to open the visual content of the selected radio station if available Save to save the details of the select
130. ve pages and view them later offline To save a page while browsing select Options gt Tools gt Save page To open the Saved pages view in the bookmarks view select Saved pages To open a page select it To start a connection to the browser service and retrieve the page again select Options gt Navigation options gt Reload The phone stays online after you reload the page Download You can download items such as ringing tones images operator logos software and video clips using the mobile browser Once downloaded items are handled by the respective applications on your phone for example a downloaded photo is saved in Gallery eX Important Only install and use applications and other software from trusted sources such as applications that are Symbian Signed or have passed the Java Verified testing End a connection To end the connection and view the browser page offline select Options gt Jools gt Disconnect To quit browsing and to return to the standby mode select Options gt Exit Empty the cache A cache is a memory location that is used to store data temporarily If you have tried to access or have accessed confidential information requiring passwords empty the cache after each use The information or services you have accessed are stored in the cache To empty the cache select Menu gt Web gt Browser gt Options gt Clear privacy data gt Clear cache 64 To clear all privacy data
131. w enter the address of the web page and select Go to Bookmarks Your device may have preinstalled bookmarks and links for third party internet sites You may also access other third party sites through your device Third party sites are not affiliated with Nokia and Nokia does not endorse or assume liability for them If you choose to access such sites you should take precautions for security or content Bookmarks are indicated by the following icons The starting page defined for the default access point 61 m Au The automatic bookmarks folder contains bookmarks 42 that are collected automatically when you browse pages 4 Any bookmark showing the title or internet address of the bookmark 42 and 4 may be replaced with the website s icon Add bookmarks manually 1 In the bookmarks view select Options gt Bookmark manager gt Add bookmark 2 Fill in the fields 3 Select Options gt Save Send bookmarks Scroll to a bookmark or mark several bookmarks select Options gt Tools gt Send and an option Connection security If the security indicator gy is displayed during a connection the data transmission between the device and the internet gateway or server is encrypted The security icon does not indicate that the data transmission between the gateway and the content server or place where the requested resource is stored is secure The service provider secures the data transmission between
132. with Directive 2002 95 EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment Export controls This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited NO WARRANTY The third party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia Nokia does not own the copyrights or intellectual property rights to the third party applications As such Nokia does not take any responsibility for end user support functionality of the applications or the information in the applications or these materials Nokia does not provide any warranty for the third party applications BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD PARTY PATENTS COPYRIGHTS TRADEMARKS OR OTHER RIGHTS 9255338 Issue 1 Contents For your Safety sssssssessesssereeeeeseeee 6 General information ssseceseeee 8 Access c
133. ze your calendar contacts or notes with various calendar and address book applications on a compatible computer or on the internet The synchronization application uses SyncML technology for synchronization Select Menu gt Settings gt Connectivity gt Sync Create a new synchronization profile 1 If no profiles have been defined the phone asks you if you want to create a new profile Select Yes 91 To create a new profile in addition to existing ones select Options gt New sync profile Choose whether you want to use the default setting values or copy the values from an existing profile to be used as the basis for the new profile 2 Define the Applications to be synchronized Select an application and edit the synchronization settings Include in sync to enable or disable the synchronization Remote database the name of the used remote database Synchronisation type Select Both ways for synchronization of the data on your phone and the remote database Jo phone only for the synchronization of the data on your phone only or To server only for the synchronization of the data on the remote database only 3 Define the Connection settings Server version Server ID Data bearer Host address Port Username and Password Contact your service provider or system administrator for the correct settings Access point Only visible if Internet is selected as Data bearer Select an access point you want to use for the

Nokia 5700 Cell Phone User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents