Home

Navigon 81XX GPS Receiver User Manual

1. A Current Position Selects the section of map displayed so that the current location is at the centre Operating in Destination search mode 1 Tap on the point to which you want to navigate The destination that you have selected appears under the cross hairs The geographical coordinates of the destination and the corresponding address are shown in the bottom third of the screen 2 Tapon s i OK Buttons with various functions will be displayed Take Me There Starts navigation to the selected point If you are currently navigating this route navigation will be cancelled Interim Destination Sets the selected point as interim destination The navigation system will first guide you to this interim destination Afterwards you can continue your original navigation This function is only active during navigation Set as Destination Adds the selected point to the route planning as the last point Navigation will then continue to this point after you have reached the original destination or the other route points The function is available only during navigation 46 Navigation Save User s manual NAVIGON 81xx Opens the SAVE DESTINATION AS window You can enter a name under which the selected point will be saved in the FAVOURITES list For more details refer to chapter Saving destinations on page 33 Search Nearby Opens the POI NEARBY window Here you can search for 6 7 6 7 1 6 7 2 Navigati
2. Even if maps from several continents are saved on the memory card in your navigation device the NAVIGON 81xx can only ever work with maps from one continent Tap in the NAVIGATION window on Options Settings Current Map in order to see which maps are currently in use Here you can also select a different continent if the memory card in the navigation device contains any maps of countries on other continents 6 6 2 Map in Preview mode You have entered a destination and tapped on Start Navigation OR You have planned or loaded a route and tapped on Show Route 40 Navigation Navigation User s manual NAVIGON 81xx The map opens in Preview mode The entire route is visible The route is highlighted in orange Your current position is indicated orange arrow If you display a planned or loaded route and the specified starting point is not your current location then it is possible that your current position will not be shown on the preview The destination is marked with a little flag If you display a planned or loaded route the starting point and each route point will be marked with a little flag You will see the total distance for the route in a small info box together with the estimated trip time and the estimated time of arrival You can select to show or hide this information in Options gt Settings gt Basic Settings If you display a multi leg route you will see this information for each leg
3. If you enter additional letters the list adapts to your entries It only contains entries that begin with the text that has been entered or contain the text in the name The more letters you enter the shorter the list will become l You can use the A Up button and the Y Down button to move through the list To accept an entry from the list simply tap on it The list closes as soon as you have accepted an entry Options Some windows offer options that lead to more functions For details of all the options available refer to the following chapters Options in the Start window on page 15 Options in the navigation application on page 38 Menus Some buttons have menus which open when activated Tap on a menu point to execute its function If you would like to quit the options list without selecting a function tap on the button you used to open the menu Navigation Use the navigation system at your own risk Caution Be sure to refer to all the safety information in chapter Important safety information on page 8 200 Navigation User s manual NAVIGON 81xx Impaired GPS reception If GPS reception is impaired navigation will be interrupted The navigation application remains in the foreground As soon as GPS reception is restored the navigation system calculates any change of position which has occurred in the meantime You can then simply continue navigation Arriving at your destination 6 1
4. Press the Zl Volume on off key See Description of the NAVIGON 81xx on page 8 68 Troubleshooting User s manual NAVIGON 81xx The software does not respond any longer The screen is frozen Or The software responds strangely to my entries Carry out a device reset All the internal components of the navigation device will be reset as the result 1 With the 5 On Off key pressed and held press the RESET key simultaneously This key is countersunk Use the stylus or a paper clip The device will switch off Wait a few seconds 2 Press the 5 On Off key in order to switch the device back on again The software will now be reloaded As soon as the START window appears you can use the device again The navigation device won t switch on Possible causes and their remedies gt The navigation device hasn t been used for a long time The battery is flat Charge the battery of the NAVIGON 81xx for a few minutes before you switch it on he navigation device is very cold Insert the NAVIGON 81xx into the cradle Make sure that the power supply is connected before you switch on the device want to dial a number from the phone book of my mobile phone with the NAVIGON 81xx The mobile phone tells me that the data transmission was successful but the NAVIGON 81xx is still not ready to dial The NAVIGON 81xx has to convert as well as import the data This can take a lot of time particularly with large
5. The nearer you get to the junction the more yellow spots are displayed If you don t have to change direction for a long time you will see only a straight arrow The distance you must continue straight on is indicated underneath the arrow gt Tap on the large arrow box to hear current route instructions Ahead of many junctions the information from 7 and 8 is hidden Instead you are shown which lanes lead to your destination The height above sea level and the current speed are displayed here The distance remaining to the destination the estimated duration of the trip and the estimated time of arrival can be seen in the Total box Navigation User s manual NAVIGON 81xx 9 Your current position is indicated on the map orange arrow The section of the map displayed changes continually so that your current position is always in view on the map 10 If you are navigating a multi leg route you will see the remaining distance to the next interim destination the estimated duration of the trip and the estimated time of arrival in the Next box 11 The name of the next stretch of road that you must travel on is displayed in the upper street box The name of the stretch of road that you are currently travelling on is displayed in the lower street box Note The displays of many of the above mentioned areas can be configured in Options Settings Basic Settings Some displays will only function if the required information is
6. User s manual NAVIGON 81xx English United Kingdom April 2008 The crossed out wheeled bin means that within the European Union the product must be taken to separate collection at the product end of life This applies to your device but also to any enhancements marked with this symbol Do not dispose of these products as unsorted municipal waste Imprint NAVIGON AG Schottm llerstra 5e 20A D 20251 Hamburg The information contained herein may be changed at any time without prior notification Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of NAVIGON AG nor may they be transmitted in any form either electronically or mechanically including photocopying and recording All technical specifications drawings etc are subject to copyright law 2008 NAVIGON AG All rights reserved User s manual NAVIGON 81xx Table of contents 1 Idee Ee de ue t EE 6 11 ADOUDTIIS un E EEN 6 11 EonVentEls EES E 6 BE Ses EA EE EE EO RE RE 6 12 edel Wie ERA OE N AR LE ON AEn ERRESA EREN A 6 FAT ET lt EE 6 kaz Tradetniar Keds E 7 1 3 Questions about the product iese ee ee ee EE ee Ee ee Ee ee Ee ee ee ee 7 2 Belore you beds ss ER e rr eid Eed brat premia Gee ee EE 7 2 SCOPE Or DEVa EE ee ee ers 7 2 2 Description of the NAVIGON 81xx ee ee ee ER ee EE Ee ee Ee EE ER ee EE Ee ee EE nns 8 2 3 Important safety Information 8 2 3 1 Navigat
7. DIESEL SR eege 55 Product Information 16 244 User s manual NAVIGON 81xx R Reality View esses Recalculate Route Recent Calls Route Planning Route points Add EE te Otra Starting Polit ENE SERE Route Profile 32 Routes Manage ss ie RS Pecans PAM ANG EE bi Dido NE Ee Route DoINIS ees ee ee ee Route Profile SIMmUIGHOR nean ESEG wad do PP EE Cs Start Navigation Staring POM EEN Turn by Turn List S Safety information Scope of Delivery OGIVO usd cate acti ur dae Sotto Settings Settings Handsfree Module Bluetooth Function Clear Connection Data Connection with Mobile EE beet 72 Simulation EXID eaa eode aaa 37 Sia EE 37 Skip Route Point 44 Software keyboard 20 SUD DOM SEE ES EP 7 Symbols used in this manual 6 T Take Me Home 31 34 TMC Recalculate Route 50 SHOW EEN 49 SVITIDOIS EE 18 Tuning Mode 50 TMC Settings Recalculate Route iese 50 TMO ei EE 49 Traffic I
8. see page 51 FM Transmitter see page 63 You can access this application via the options in the START window Note If you have not used the NAVIGON 81xx for a long time the battery may be flat In this case the device needs to be charged for approximately 10 minutes before it can be switched on Forgotten your password If you forget your password follow the procedure described in Forgotten your password on page 17 3 1 Options in the Start window You can access more functions via the Options button 1 Tap on Options to open the options list 2 Tap on the option you would like to use gt If you would like to quit the options list without selecting an option tap on the Options button again Password Lock You can protect your navigation system from unauthorised use by creating a password Refer to page 16 Switching on the NAVIGON 81xx 15 User s manual NAVIGON 81xx Product Information Here you are shown the version numbers and copyright details of the hardware and software Touchscreen Calibration The touchscreen can be re calibrated if it responds poorly to touch Follow the instructions on the screen Settings Here you can make the settings which are to apply in all applications of the NAVIGON 81xx e g language brightness and time format For details refer to chapter Configuring the NAVIGON 81xx on page 64 Factory Settings Resets all settings to the as delivered state Routes and saved d
9. DESTINATION INFO window opens It contains all the information about the specified destination that is stored in the navigation system s database gt Tap on Cancel in order to close the DESTINATION INFO window again Ca gt Tapon Si Show on Map in order to see the destination on the map Tap on Kr Call in order to call the number indicated Note The Call function is only available when the NAVIGON 81xx is connected via Bluetooth to a mobile phone For details of how to connect to a mobile phone refer to chapter Connecting to a telephone on page 52 Last Destinations NAVIGON 81xx saves the last 12 destinations to which you have navigated in the LAST DESTINATIONS list 1 In the NAVIGATION window tap on My Destinations Last Destinations 2 Tap on the destination to which you would like to navigate 3 Tap on Start Navigation The map opens in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 Favourites Destinations to which you want to travel often can be saved in the FAVOURITES list In the FAVOURITES list you can save up to 500 destinations Navigation s 6 2 8 6 2 9 s Navigation User s manual NAVIGON 81xx Information on how to save a destination can be found in chapter Saving destinations on page 33 In the NAVIGATION window tap on My Destinations gt Favourites 2 Tap on the
10. Operating the MP3 player Information area Three music items are always displayed in the information area of the MUSIC window gt Title last played position of the file in the folder name of the title performer If no title was played yet the last title in the current folder will be shown here gt Current title name of the album position of the file in the folder name of the title performer progress and duration The title that is currently being played back or that will be played back when you tap on Play gt Next title position of the file in the folder name of the title performer If there is no next title the first title in the current folder will be displayed If the name of the album and the performer cannot be read out of the file they will not be displayed If the name of the title cannot be read out of the file the name of the fille will be displayed instead Controls l Play Plays back the current title Stop Stops the play back Nk Pause Interrupts the play back l lt lt Rewind Tap briefly jumps to previous title Press and hold fast rewind in the current title a aa Fast forward Tap briefly jumps forward to the next title Press and hold fast forward in the current title Back Moves the application from which you opened the MP3 player to the foreground If play back is in progress it is not terminated Play back mode The MP3 player plays all titles in the curre
11. available on the map Note If you tap on the large arrow box the current route instruction will be repeated eo gt Tap on Options gt Turn by Turn List to view detailed directions for the route Refer to Turn by Turn List on page 48 gt Tapon Destination search in order to view the map in Destination search mode Refer to Map in Destination search mode on page 45 Volume The volume of the spoken driving instructions can be adjusted during navigation 1 Tap on Volume The volume bar opens It contains three buttons for adjusting the volume G ender EN Weer Ee anme on off 2 Tapon Volume again or wait a few seconds The volume bar closes Note The volume can be controlled likewise with the keys of the navigation device See Volume on page 17 Quitting navigation Tap on mm Back in order to quit navigation A dialog box will prompt you to confirm Navigation 43 User s manual NAVIGON 81xx Functions of the map in Navigation mode When the map is open in Navigation mode and you tap on any point on the map buttons with various functions will appear 2D 3D Changes between 2D and 3D mode The icon indicates the current mode Day Night Changes between Day and Night display modes The icon indicates the currently selected mode Interim Destination Opens the menu for entering an interim destination The navigation system will first guide you to this interim destination
12. destination on page 24 ff 4 Tap on Set Starting Point The selected starting point will now be displayed next to the 0 button Starting Point Changing the starting point 6 4 2 6 4 3 gt Tap on the Specify Starting Point box The STARTING POINT menu opens You can now enter a different starting point Proceed as described above Entering route points The route points of a route are the destinations that you want to navigate to The flow number for each route point is indicated on a button in front of it 1 Tap on the Add Route Point box The ROUTE POINT menu opens 2 Tap on the button for how you want to enter the destination 3 Enter the route point Refer to the corresponding section of chapter Specifying a destination on page 24 ff 4 Tap on Add The selected route point is now shown next to its flow number Repeat these steps for each destination that you want to add to your route Editing route points Route points can be deleted from a route The order of the route points can be changed as you wish Navigation 35 User s manual NAVIGON 81xx Note The start point flow number 0 can be neither moved nor deleted gt Tap on the route point that you want to edit The context menu contains the following buttons Route Point Up Moves the selected route point further to the front Example route point 2 becomes route point 1 ya Route Point Down Moves the selected route poin
13. dialled only if the caller s number was transmitted Handsfree Module 53 User s manual NAVIGON 81xx 7 3 5 7 4 7 4 1 7 4 2 7 4 3 54 1 Tap in the HANDSFREE MODULE window on the Recent Calls button 2 Tapon the entry you want Note The RECENT CALLS list is not copied permanently to the navigation device It is available to the hands free module only for as long as it is connected to the mobile phone Transferring a call from your mobile telephone The NAVIGON 81xx takes calls automatically from the mobile phone as soon as a Bluetooth connection is established between the two devices During a call You are calling using the hands free module The CALL IN PROGRESS window is open Moving the navigation application to the foreground You can move the navigation application to the foreground at any time In this way you can have the map in the foreground during a call when the NAVIGON 81xx is in the process of navigating gt Tapon the Navigation button While a call is in progress the E icon Call in Progress green mobile phone is visible in the top right corner of the display gt Tap on the button Phone in order to open the CALL IN PROGRESS window again Entering numbers You can enter numbers during a call This may be the case for example if a further connection via a telephone system is necessary 1 Tap on Keyboard 2 Enter the desired numbers 3 Tapon qu Back in order
14. from at least three satellites is required for positioning with an acceptable degree of accuracy With data from 4 or more satellites it is possible in addition to determine the position s altitude above sea level Positioning is accurate to within three metres Once the navigation device has determined your position this position can be used as a starting point for calculating a route The map data on your navigation device includes the geographical coordinates of all digitally recorded points of interest streets and places This enables the device to calculate a route between a starting point and a destination Calculation of the current position and its representation on the map takes place once every second In other words your current position is always shown on the map Before you begin User s manual NAVIGON 81xx 3 Switching on the NAVIGON 81xx 1 Press the 5 On Off key If password protection has been activated the ENTER PASSWORD window opens 2 Enterthe password 3 Tapon OK The START window opens Note When you switch on the NAVIGON 81xx for the first time you will be asked to make the following settings gt your preferred language for using for the software gt the unit of length for distances the time format From the START window you can access all applications of the NAVIGON 81xx Navigation see page 22 Music see page 58 Pictures see page 61 gt Phone Handsfree Module
15. in place Charging the rechargeable battery It is possible that the rechargeable battery is not fully charged when you unpack the navigation device We recommend that you fully charge the battery before using the device for the first time gt Connect the mains adapter to the navigation device and to a mains socket Note Without delay plug the USB connector into the navigation device as far it will go See Troubleshooting on page 68 During charging the LED on the bottom of the NAVIGON 81xx shines with an orange light The LED goes out again when the NAVIGON 81xx is fully charged Note When the bluetooth function of the NAVIGON 81xx is active the LED shines with a blue light This is also the case during charging For detailed information refer to chapter Handsfree Module on page 51 Note It takes approx 4 5 hours to charge the device when the battery is flat Before you begin 11 User s manual NAVIGON 81xx 2 4 3 Memory card A memory card with the software and card data is already inserted in the navigation device You can copy these data to another memory card or save them on your PC To do so use the NAVIGON Fresh software which is included on the CD provided or can be downloaded free of charge from www navigon com The following memory media can be used in the NAVIGON 81xx gt SD cards with maximum 2 GB gt SDHC cards Removing the memory card 1 Switch off the navigation device To do so press
16. m EA e UIS tatty 33 Start Navigation 32 Take Me Home 31 34 Turn by Turn List 33 E Emergency Services 38 47 Energy tst aa Roe 11 13 19 Entering data aee cu ani 22 F Factory Settings 16 Sein 30 33 FM Transmitter Activate eL ertet 63 Deactivate X 63 SVIMDOIS EE 20 G GPS Faulty reception 23 Initialise eene 23 elei 14 e lee ar dicetis rae AD De 18 GPS Status ee ee ee ee ee ee ees AT H Handsfree Module Bluetooth Function 56 E EEN 52 Call in PEOGIBSS distet 54 Clear Connection Data 58 Connection with Mobile PHONG EE EE 52 56 Dial a Number s 53 Enter numerals o o crecen 54 Handsfree Settings 55 FEE RE 54 Index Incoming Call 52 OPO EE 51 Phone Book 53 IS EE 53 55 Recent Calls 53 SSNS aeee Corre ea odes 54 SHOW E ME 54 SYMDOIS E 19 Use handslree usi EE Rut 54 Use Mobile Phone 54 VOLG oo EA SE EE EE rsa 51 Handsfree Settings 55 Home Address ee ee ee 31 34 FOU Gost ice ie ia EE T I Input Sequence sssseess 25 Interim Destination 44 K ENEE
17. may arise during use of the NAVIGON 81xx This list does not claim to be complete Answers to many other questions can be found on the NAVIGON AG website See Questions about the product on page 7 have connected a charger to the NAVIGON 81xx A connection to a computer is shown on the display Or I have connected the NAVIGON 81xx to a computer but it is not detected as a removable disc The USB connector of the charger is not fully inserted in the case 1 Unplug the connector The navigation device will carry out a new start Wait for the software to be reloaded 2 Without delay insert the USB connector from the charger into the corresponding socket of the NAVIGON 81xx as far as it will go See Description of the NAVIGON 81xx on page 8 The USB connector is not connected correctly See above I have changed the language for the use interface and now there are different buttons in the Navigation window The Voice Command function is not available for every language In the languages for which this function is not available the Voice Command button is replaced by the Show Map button am not receiving any navigation instructions or want to listen to music but am getting no sound Possible causes and their remedies gt The FM transmitter is in operation but the car radio is off or tuned to a different frequency Switch off the FM transmitter See FM Transmitter on page 63 gt The NAVIGON 81xx is muted
18. not to record the trip in guestion gt If you don t want to record the trip in question tap on mou Cancel OR 1 Enter a name for this entry e g Trip to customerX in the Logbook Entry box 2 Enter the mileage 3 Tap on Reason for the Trip and select a reason for the trip from the list of possibilities 7 Handsfree Module The hands free function allows you to use the NAVIGON 81xx as a hands free module for your mobile phone Opening the hands free module gt Inthe START window tap on Phone OR gt Tap in the navigation application on Phone The HANDSFREE MODULE window opens Operating the hands free module You can adjust the volume of the hands free module independently of the volume of the navigation system For details of how to adjust the volume refer to Volume on page 17 gt Tapon Music in order to move the MP3 player into the foreground Handsfree Module 51 User s manual NAVIGON 81xx 7 1 7 2 252 gt Tapon Navigation in order to move the navigation application into the foreground gt Tapon Back in order to close the hands free module and return again to the previously opened window Connecting to a telephone The NAVIGON 81xx must be connected to a mobile phone in order for you to use the telephone functions If the NAVIGON 81xx was last connected to the same mobile phone the connection will be established without further prompting P
19. spot indicated The map will then change back to Navigation mode gt If you want to change to Navigation mode before you have passed the junction just tap on any point on the map Note Reality View is not available for all motorway junctions and three leg motorway junctions Availability is dependent on the map data in use Map in Destination search mode The map is always in Destination search mode when the cross hairs can be seen Indicated in the address box are the coordinates and where applicable the name of the street under the cross hairs When you are driving the map does not change It is always orientated with north at the top 132732 0 52 28 28 N SONNENALLEE EE P E dd UA i p 4 Options 1 f 45 User s manual NAVIGON 81xx e Zoom Out The map section shown becomes larger but you will see fewer details EN Zoom In The map section becomes smaller but you will see more details e Zoom Mode When this button is active you can mark out a section of the map with the stylus or your finger Mark out the section from upper left to bottom right to zoom in until the section fills the screen Mark out the map section from bottom right to top left to zoom out 7 Pan Mode When this button is active you can change the section of map displayed with the stylus or your finger Simply drag the map in the desired direction e Entire Route Zooms the map so that the entire route is visible
20. the 5 On Off key 2 Press the memory card gently into the device until the lock disengages 3 Let go of the memory card It will now project slightly out of the device 4 Pull the memory card out of the slot Inserting a memory card 1 Insert the memory card into the device see illustration 2 Press the card into the device until it locks in place Note The navigation device will work only if the memory card contains the navigation software and map data 12 Before you begin User s manual NAVIGON 81xx 2 4 4 Preparing the navigation system for use Caution Be sure to refer to all the safety information in chapter Important safety information on page 8 Securing the cradle S Clean that part of the windscreen to which you want to secure the cradle The windscreen must be dry and free of dirt and grease 2 Use the suction cup to fix the cradle to the windscreen 3 Press the lever on the suction cup forwards Supplying power to the navigation device Included in delivery of the NAVIGON 81xx is a car charger cable with which power can be supplied to the navigation device via the vehicle s cigarette lighter Connect the car charger cable to the vehicle s cigarette lighter and to the mini USB socket on the cradle The navigation device will be supplied with power as soon as it is inserted in the cradle Note Power supply will only be possible via the cradle when the navigation device is inserte
21. 0 minutes to initialise the GPS receiver for the first time 229 User s manual NAVIGON 81xx Note If the GPS icon indicates GPS Ready after far less than 20 minutes it is advisable to leave the navigation device switched on for at least another 15 minutes in order to ensure reliable operation of the receiver Each time you switch on the navigation device after this GPS reception will start within a short time If the navigation device has not been switched on for more than a week it can take up to 10 minutes to re initialise the receiver In the top right hand corner of the display you will see the GPS icon As soon as data from at least 3 satellites is received the icon will change to M GPS Ready Note Initialisation takes the least time if you do not start driving until the initialisation has finished s For more details about the GPS icon refer to chapter GPS on page 18 Returning to the Navigation window 6 2 The NAVIGATION window opens when the navigation application is started If another window of the navigation application is open tap on am Back This will return you to the window you came from gt Tapon ammi Back repeatedly until the NAVIGATION window is opened Specifying a destination Under New Destination you can enter destinations to which you have not yet navigated or which you have not saved You can enter an address here select a special destination or select a destin
22. 1 User s manual NAVIGON 81xx 6 2 10 A 6 2 11 Selecting destinations on the map You may select a destination directly on the map This is a quick way to select towns streets and POI 1 In the NAVIGATION window tap on Options Show Map 2 Tapon Destination search The map opens in Destination search mode 3 Tapon the point to which you want to navigate Note Please refer to chapter Map in Destination search mode on page 45 for detailed information on how to change the map view so that your destination is easily seen The destination that you have selected appears under the cross hairs The geographical coordinates of the destination and the corresponding address are shown in the bottom third of the screen 4 Tapon S oig The DESTINATION ON MAP window opens The detailed address data of the selected destination is displayed in the upper left hand corner 5 Tap Take Me There The map opens in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 Starting navigation The map is open in Preview mode The navigation destination is depicted by a small flag The route and the estimated trip time are indicated Route Profile UE The route is calculated on the basis of a route profile gt If you want to view or change the route profile tap Route Profile Note If you change the route profile the c
23. 20 L Last Destinations 30 33 LOG HOO E 50 M Manual CONVENTIONS EE 6 SVEDDOILS RE a tani 6 Map Destination search 45 Navgaton ees sesse ee see RR Ee 41 EE 40 Reality View 44 Memory card ee see ee RR Ee 12 Menu en Ee ER eo raiz Se 22 ME Ee sa SS te Ee Eat siet 58 CHE 58 Et E Loos oie bubus eb apud qo ate lb aer bn pita 20 My Destinations 24 Index User s manual NAVIGON 81xx N Navigation BIOCK RR 44 48 Interim Destination 44 NOSE S uscite E 33 38 POLE E 44 POI on Your Route 44 Route Profile 32 37 Skip Route Homt ee ee see ee 44 Start cie bcd coti e esr 32 37 Turn by Turn List 33 38 Navigation Application Eeer 23 e DEE 23 NAVIGON 81xx Descriptio oce et GE aes 8 EROIOY seek re E 11 13 installation EER ER SE GEE 13 Memory Card 12 Scope of Delivery 7 e GE 15 joe 13 New Destination 24 O KEIER 15 22 38 P Password Lock sees 16 Phone see Handsfree Module Plone BOOK ree NG GE 53 Picture Viewer xoci deret Ee ie 61 Pictures ee ee ee ee ee ee ee ee ee ee 61 POI Direct Access enn 29 Na TOWER Ee AE 28 Nationwide ee ee ee ee ee ee ee 28 NG AID Vis T 27 On TOUIE o vede cust eo Rei 44
24. 62 Specifying a destination ss EE oo eor Cor etx Ee ED ee De ee beg 24 6 2 1 Specifying the country in which the destination is situated 25 6 2 2 Entering an address ss de sende se ed ae Pais au salut dale 25 6 2 3 Selecting the destination address by voice command 26 6 24 PONS e EE 27 6 2 5 Information about the destination ee ee ee RR EE ee RR 30 6 26 East DESUMALIONS uci ERA EE eN se Ro Ri eb edi aa ur de 30 627 EE ul 30 D 2 0 COMACIS dosis ere 31 629 Navigating olio see Si ke deua koe doceret aqu 31 6 2 10 Selecting destinations on the Map see ee ee Re RR 32 56 2 11 Starting Ma le E EE 32 6 3 Managing destinations E 33 63 17 Saving destinations eid dr ES Har bos eene Pb ehe beoe te 33 6 3 2 Defining a destination as home address 34 E AMUlUSIBg e 34 6 4 1 Entering the starting point uk 34 6 4 2 Entering route points ees ee EE AA EE ee nenne 35 648 Editing route POMS x5 icti icc reper ate reb EE RE Ge Ee Pe ses 35 GAA Managing FOUteS piro ee ed n oe c evo Ee oet 36 6 4 5 Calculating and displaying routes esse ee RR EE ee RR ee ee RR 37 646 2SIMUIATING Brei 37 64 7 Staring Be Le In EE 37 6 5 Options in the navigation applcaton ees ee ee ee Ee Ee ee Ee ee 38 6 6 MVorKihg wil tie MADE ER NE DE M doc Qu enema e 40 X EN WE Uo 40 6 6 2 Map in Preview mode 40 6 6 3 Map in Navigation MOde cccccssessecessessecesseseeessenseeessene
25. Afterwards you can continue navigating to your original destination Skip Route Point Tap on this button to omit the next route point This button is active only when at least 2 route points still lie ahead of you See Multi leg routes on page 34 Block Tap on this button in order to block a section of the route that lies in front of you i e to recalculate the route in order to avoid this section e g if you have heard on the radio of a traffic jam affecting this section Tap on this button again to remove the block POI on Your Route Tap on this button to display POI on your route This way you can quickly find out for example how far it is to the nearest services A destination shown here can be added as an interim destination by tapping the eJ Interim Destination button to the right of its entry in the list 6 6 4 Reality View The map switches to Reality View mode when you approach one of the following points while driving on the motorway gt amotorway junction gt athree leg motorway junction the exit you must take to leave the motorway 44 Navigation 6 6 5 Navigation User s manual NAVIGON 81xx it FURTH POPPENREUTH FURTH STADTMITTE KN T Dee N AS F RTH POPPENREUTH 26 mi 0 mi A73 FRANKENSCHNELLWEG 12 52 I 4 f Options n D a The Reality View mode shows with greater clarity the signposting and lanes you must follow This display does not change until you have passed the
26. GPS reception for example in the comfort of your home Planned routes can be saved for later use This allows you to plan as many routes as you like for example for your holidays 1 In the NAVIGATION window tap on Options The options list opens 2 Tap on the Route Planning option The ROUTE PLANNING window opens Entering the starting point The starting point of a route is the point at which you want to begin your trip This is not necessarily the current location If you are planning a route for your holidays at home you could for example enter your hotel as the starting point The starting point is only important if you want to see a planned route on the map but currently have no GPS reception or if you are not currently at the planned starting point This is why your selected starting point has the flow number O Navigation User s manual NAVIGON 81xx As soon as you start navigation your current location will be used as the starting point for the route calculation The first leg of the route is therefore the journey to the route point with flow number 1 1 Tap on the Specify Starting Point box The STARTING POINT menu opens If you want to enter your current location as the starting point 2 Tap on the Current Position menu item If you want to enter a different starting point 2 Tap on the corresponding button 3 Enter the starting point Refer to the corresponding section of chapter Specifying a
27. GPS signal reception is not good enough the following message will appear GPS reception is currently not sufficient Navigation starts automatically as soon as GPS reception is OK again You have the following options Wait As soon as GPS reception is good enough for determining your position the route will be recalculated and navigation will begin gt Tap on Cancel The NAVIGATION window opens Options in the navigation application Some windows offer options that lead to more functions gt Tap on Options to open the options list gt Tap on the option you would like to use gt If you would like to quit the options list without selecting an option tap on the Options button again Add to Route Opens the route planning The selected address will be entered as the starting point of a new route For more details refer to chapter Multi leg routes on page 34 Delete All Deletes all destinations in the list LAST DESTINATIONS list or FAVOURITES list depending on where you opened the options The list is then empty A dialog box prompts you to confirm deletion Delete Deletes the selected destination from the LAST DESTINATIONS or FAVOURITES list or the selected route from the SAVED ROUTES list A dialog box prompts you to confirm deletion Emergency Services Opens a window in which your current location is SE indicated If the NAVIGON 81xx is connected to a mobile phone you can have yourself connect
28. NATIONS and CONTACTS lists can be saved in the FAVOURITES list This makes sense if you frequently navigate to a particular destination Saving destinations 1 Enter a destination Refer to Entering an address on page 25 or to Points of interest on page 27 Do not tap the Start Navigation button 2 Tap on Options Save Destination OR E User s manual NAVIGON 81xx 6 3 2 6 4 6 4 1 34 1 Select a destination from the LAST DESTINATIONS list or from the CONTACTS list Refer to Last Destinations on page 30 or to Contacts on page 31 Do not tap the Start Navigation button 2 Tap on Options Save as Favourite 3 Enter a name for the destination 4 f you want to define the destination as your home address tap on n Toggle so that the value Yes is highlighted in white 5 Tap on Save Defining a destination as home address One destination from the FAVOURITES list can be defined as your home address Then you can always start navigation to this destination very quickly by tapping in the NAVIGATION window on Take Me Home 1 Select the destination which you want to define as your home address from the FAVOURITES list Refer to Favourites on page 30 2 Tap on Options Home Address The selected destination has now been saved as your home address Your home address now appears in the FAVOURITES list marked by a house symbol Multi leg routes It is possible to plan routes without
29. When you have reached your selected destination a message to this effect will be displayed Only your current position orange arrow will now be shown on the map Starting the navigation application You have switched on the navigation device and if necessary entered the password The START window is open 1 Tap on Navigation The navigation application will be started When you start the navigation application for the first time the following message will appear Please note that the road traffic regulations are prior to the instructions of the navigation system Please do not operate the device while driving 2 After you have read and fully understood the message tap on OK If you do not accept the content of the message tap on Cancel in order to exit the navigation application The NAVIGATION window is opened From here you can access all the functions of the navigation application gt Tapon Music in order to move the MP3 player into the foreground gt Tapon Phone in order to move the hands free module into the foreground gt Tapon Back in order to move the START window back into the foreground Initialising the GPS receiver Navigation As soon as the navigation device has been switched on initialisation of the GPS receiver will begin The integrated GPS receiver is not initialised for the first time until the navigation application is started for the first time It can take up to 2
30. a 5 oS Mini USB socket for USB cable Mains adapter Car charger cable 6 LED 7 RESET Reset 8 e Headset socket 9 Quieter 10 Microphone 11 Louder 12 Stylus 13 Sg Slot for SD SDHC memory card 14 D owof 2 3 Important safety information In your own interest please read the following safety information and warnings carefully before starting up your navigation system 8 Before you begin N BP PPPP N oo NO gt PPP User s manual NAVIGON 81xx Navigation safety information Use the navigation system at your own risk Caution To prevent accidents do not operate the navigation system while driving Caution Do not look at the display unless it is absolutely safe to do so Caution Traffic regulations have priority over any instructions from the navigation system Caution Follow the instructions of the navigation system only when the circumstances and the road traffic regulations allow you to do so The navigation system will still guide you to your destination even if you deviate from the calculated route Caution Check that the cradle is secured and adjusted properly before each journey Note If you have not understood the spoken instructions or are unsure about what to do next you can refer briefly to the map or schematic view of your navigation system Safety information for the navigation device Caution Protect the device from moisture The device is neither waterproof nor protected against
31. an be received Note The TMC antenna is integrated in the car charger cable The Tuning icon may also appear therefore in the following cases gt The NAVIGON 81xx has been placed in the cradle but the car charger cable is not connected to the cradle gt The NAVIGON 81xx has not been placed in the cradle and the car charger cable is not connected to the navigation device For details of the TMC function refer to chapter TMC Traffic Information on page 49 Energy The Energy symbol can indicate the following states of the integrated battery TE The device is being supplied by an external power source The battery is fully charged ih The device is being supplied by an external power source The battery is being charged d al The device is being supplied by its internal battery The battery charge is sufficient dx The device is being supplied by its internal battery The battery charge is low Bluetooth Phone The NAVIGON 81xx has an integrated Bluetooth hands free module This enables you to use the device as a hands free kit for a mobile phone with Bluetooth capability The LED on the bottom of the NAVIGON 81xx shines with a blue light when the Bluetooth function is activated For more details refer to chapter Handsfree Module on page 51 The Phone icon can display the following states of the hands free module No Bluetooth No symbol The Bluetooth function is deactivated E Not connected red mobile p
32. ating temperature Operating conditions Storage temperature Humidity CPU Operating system Display Memory RO RAM GPS TMC FM Transmitter Device keys Stylus Keyboard Loudspeaker Microphone ES Headset Memory card USB Bluetooth Power supply Rechargeable battery Type Electronic SS Duration Input Output Mains adapter Operating temperature Input Car charger Output cable Operating temperature 134 5 x 84 4 x 21 9 mm approx 265 g 10 C to 60 C 14 F to 140 F 30 C to 70 C 22 F to 158 F 0 to 90 non precipitating Samsung 2443 533Mhz Microsoft Windows CE 5 0 4 8 LCD colour display with resistive touch panel 480 x 272 pixels WQVGA Landscape format transmissive 512 MB 128 MB Yes SIRF GPS III 20 channels Built in antenna Socket for external antenna Yes Yes 5 On Off Back Quieter Louder Volume on off Plastic stylus Software keyboard Yes Yes 3 5 mm phone jack SD SDHC MMC USB 20 Integrated CSR Bluecore 4 Via USB socket or via cradle Li lon 1500 mAh Integrated approx 4 5 hours 100 240V alternating current AC 1A 5V direct current DC 0 C to 40 C 32 F to 104 F 10 30V direct current DC 1A 5V direct current DC 10 C to 60 C 14 F to 140 F Appendix 12 2 12 3 Appendix User s manual NAVIGON 81xx Identification and serial number The navigation device has various identification labels underneath the r
33. ation from the quick search function Note The first time that you want to enter a new destination you will be asked to select the country in which your destination is situated Under My Destinations the NAVIGON 81xx provides the following lists s DAE of destinations and addresses for you to select from gt LAST DESTINATIONS destinations to which you have navigated on a previous occasion gt FAVOURITES all destinations that you have saved in the NAVIGON 81xx Navigation 6 2 1 6 2 2 Navigation User s manual NAVIGON 81xx gt CONTACTS all destinations which you have imported from Microsoft Outlook Specifying the country in which the destination is situated Above the entry boxes in the ADDRESS POI IN A TOWN and POI NATIONWIDE windows is the Country button It shows the country code of the country from which you can currently enter navigation destinations If your destination is in a different country then proceed as follows 1 Tap on the Country button The COVERED COUNTRIES list opens 2 Tapon the country in which your destination lies The COVERED COUNTRIES list closes The country code of the destination country will appear on the button Note The selection list contains only those countries whose maps are on the SD card Entering an address 1 In the NAVIGATION window tap on New Destination Enter an Address If you want to enter an address in a country in which normally the stre
34. button 4 Confirm that you want to delete the Speed Call number The MODIFY PRESET window opens again No phone number and no name exist any longer for the selected Speed Call button Handsfree Module 55 User s manual NAVIGON 81xx 7 5 2 Handsfree Settings In the HANDSFREE SETTINGS window you can configure the settings for the phone functions of the hands free module of your NAVIGON 81xx gt Inthe HANDSFREE MODULE window tap on Settings gt Handsfree Settings The HANDSFREE SETTINGS window opens Volume of the Phone Call The volume of the call can be adjusted independently of the volume of the navigation application and the MP3 player Volume of the Ring Tone The volume of the ring tone can be adjusted independently of the volume of the navigation application and the MP3 player 7 5 3 Bluetooth Function gt Inthe HANDSFREE MODULE window tap on Settings gt Bluetooth Function The BLUETOOTH FUNCTION window opens Bluetooth Function Select whether you want to activate the Bluetooth function Yes or No The hands free module cannot connect to a mobile phone if the Bluetooth function is deactivated Discoverable by Others Select whether other Bluetooth capable devices in particular mobile phones should be able to detect the NAVIGON 81xx Yes or No Others May Connect Select whether other devices should be able to initiate a connection Yes or No Reconnect automatically Select whether the connect
35. d The device s USB socket will then be out of function Caution Connect the car charger cable only to 12V cigarette lighters TMC antenna The NAVIGON 81xx has an integrated TMC receiver A TMC antenna is integrated in the car charger cable As soon as the navigation device is inserted in the cradle it can receive traffic message updates Dynamic route changes are thus possible e g in order to avoid a traffic jam Inserting the navigation device into the cradle Before you begin 13 User s manual NAVIGON 81xx On the rear of the navigation device is a ring which fits in the ring of the cradle 1 Align the head of cradle so that the button is on top 2 Tilt the top end of the navigation device slightly towards yourself 3 Position the recess in the ring of the navigation device so that it fits in the ring of the cradle See illustration 4 Press the device against the cradle until you hear it lock in place Removing the navigation device from the cradle 2 5 14 1 Press the button on top of the cradle 2 Tilt the navigation device slightly towards yourself 3 Remove the device from the cradle Navigating with GPS GPS is based on a total of at least 24 satellites which are circling the earth and constantly transmitting their position and time The GPS receiver receives this data and calculates its own geographical position on the basis of the information transmitted by the various satellites Data
36. destination to which you would like to navigate 3 Tap on Start Navigation The map opens in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 Contacts Using the NAVIGON Sync program from the CD provided you can export to you navigation system any contact addresses which you have saved in Microsoft Outlook on your computer Contacts which have been saved with several addresses will appear once with each address in the CONTACTS list 1 In the NAVIGATION window tap on My Destinations gt Contacts 2 Tap on the address to which you want to navigate 3 Tap on Start Navigation The map opens in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 Navigating home In NAVIGON 81xx you can save an address as your home address You can navigate to your home address at anytime by activating a single button The first time you tap on Take Me Home you will be asked to enter your address Further information about entering your home address can be found in chapter Defining a destination as home address on page 34 gt Inthe NAVIGATION window tap on Take Me Home If you have not yet entered your home address a dialog box will notify you of this Navigation starts The route profile used for the previous navigation will be applied 9
37. e Latin keyboard Many addresses can then also be entered as transliterations or in the language of the user interface Example The language of the user interface is English You want to navigate to Moscow You have the following options gt Mocksa Cyrillic gt Moskva transliterated gt Moscow English Note Street names and place names can be entered only in the language of the user interface if that is how they exist in the map s database Umlauts accents and other letters Another keyboard with special characters is available for each alphabet SYM opens the keyboard with Latin special characters b opens the keyboard with Cyrillic special characters Al opens the keyboard with Greek special characters As soon as you have entered a special character the letter keyboard reappears Operating the NAVIGON 81xx 21 User s manual NAVIGON 81xx Note The Cyrillic alphabet has more letters than places available on the Cyrillic keyboard The missing letters are included on the keyboard with Cyrillic special characters 5 3 2 5 4 5 9 Entering data Often lists appear from which you can select an entry This is the case for example when you enter the name of a town As soon as you enter the first letter the largest city in the given country that begins with this letter appears As soon as you enter the second letter a list appears with all locations that begin with the letters entered
38. e NAVIGON 81xx you can make a call in various ways Note Play back of the MP3 player and the navigation instructions are muted during a call Dialling a telephone number 1 Tap on the HANDSFREE MODULE button in the Keyboard window 2 Enter the desired telephone number 3 Tapon the Dial a Number button Dialling a Speed Call number to call home You can configure 4 Speed Call buttons gt Tap in the HANDSFREE MODULE window on the corresponding Speed Call button Note If no number has been entered for the Speed Call button selected or if no Bluetooth connection has been established to a mobile phone the MODIFY PRESET window will open For more details refer to chapter Preset on page 55 Calling a contact from the phone book You can select numbers from the phone book of the mobile phone to which the NAVIGON 81xx is connected 1 In the HANDSFREE MODULE window tap on Phone Book 2 Tap on the contact you want to call If more than one phone number is saved for this contact a list with all the phone numbers saved for the contact will open 3 Tapon the number you want to dial Note The phone book is not copied permanently to the navigation device It is available to the hands free module only for as long as it is connected to the mobile phone Calling most recently dialled received or missed numbers Note The RECENT CALLS list contains outgoing incoming and unanswered calls Incoming and unanswered calls can be
39. e navigation device is easy to see and operate by the driver Make sure that the driver s view of the traffic is not impeded Caution Do not attach the cradle within the working zone of any airbags Caution Do not fasten the cradle too close to the steering wheel or other controls The driver must not be obstructed in operating any car functions Caution When installing the cradle make sure that it will not pose a risk in the event of an accident Caution Do not run cables directly next to safety relevant devices and power supplies Caution Check the cradle regularly to make sure that it is securely seated The suction cup may become loose after a while Before you begin 2 4 2 4 1 2 4 2 e User s manual NAVIGON 81xx Caution After installation check all safety relevant equipment in the Car Caution Connect the car charger cable only to 10 30V cigarette lighters Caution Disconnect the car charger cable from the cigarette lighter whenever you park the car The integrated mains adapter always consumes a small amount of energy and could drain the car battery Preparing the NAVIGON 81xx for use Assembling the mains adapter The mains adapter has an operating voltage of 100 240V Several different plug adapters are provided Charging the navigation device when abroad is therefore no problem gt Push the correct plug adapter for the country in question into the slot on the mains adapter until it locks
40. ear cover e g CE label serial number If you need to see any of these labels proceed as follows 1 Switch off the navigation device 2 Take the stylus and the memory card out of the device 3 With your thumbnail in the slot on the bottom of the device pull the rear cover off the device To close the rear cover again 1 Place the cover correctly in position 2 Push the cover firmly against the device until it latches home in all corners 3 Re insert the stylus and the memory card Note We recommend that you remove the rear cover only when told to do so by our service staff Declaration of conformity The NAVIGON 81xx device described in this manual bears the following labels CE 1177 It is authorised for operation in the countries of the European Union Switzerland Norway and the countries of North America NAVIGON AG declares herewith that the NAVIGON 81xx device conforms with the Radio amp Telecommunication Terminal Equipment Directive R amp TTE 1999 5 EEC The direction of conformity can be found at the following Internet address http navigonuk custhelp com cgi bin navigonuk cfg php enduser std adp php p fagid 222 The manufacturer is not liable for modifications made by the user which may alter the device s conformity with the CE label nor for the consequences thereof G7 User s manual NAVIGON 81xx 13 Troubleshooting In this chapter you will find solutions to problems which
41. ed directly to the emergency hotline For information about connecting to a mobile phone refer to chapter Handsfree Module on page 51 Navigation User s manual NAVIGON 81xx GPS Status Opens the GPS STATUS window Here you can see details regarding GPS reception You can also save the data of your current location For details refer to chapter GPS Status saving the current location on page 47 Home Address Saves the selected destination as your home address You can then always start navigation to this destination very quickly by tapping in the NAVIGATION window on Take Me Home New Route Deletes the starting point and all route points from the ROUTE PLANNING window so that you can plan a new route If necessary save the previously planned route Rename Opens a window in which you can change the name for the selected destination or route Route Planning Opens the ROUTE PLANNING window Here you can plan routes manage planned routes and start navigation on a planned route For more details refer to chapter Multi leg routes on page 34 Route Profile Opens the ROUTE PROFILE window Here you can view the options for route planning and if necessary change them Save as Favourite Saves the selected destination to the FAVOURITES list For more details refer to chapter Saving destinations on page 33 Save Destination Saves the selected address in the FAVOURITES list For more details refer to chapter Saving destinat
42. ements on the user interface Underlined and italics Names of control elements on the navigation device 1 1 2 Symbols The following symbols refer to specific passages of text Instructions and tips for operating the software A More detailed information and explanations A Warnings 1 2 1 2 1 Legal notice Liability The software and manual are subject to change without notice NAVIGON AG is not liable for the accuracy of the information contained in this manual or for damages resulting from the use of this manual Suggestions for improvements and information regarding errors are always welcome so that we can supply you with even better products in the future Introduction 1 2 2 1 3 User s manual NAVIGON 81xx Trademarks All brand and trade marks mentioned in this document and registered by third parties are subject without reservation to copyright law and the proprietary rights of their respective owners All trade marks trade names and company names used in this document are or may be trade marks or registered trademarks of their respective owners All rights reserved except those explicitly granted If the registered trademarks used in this manual are not explicitly identified as such this does not imply that the name is not subject to the rights of a third party gt Microsoft Outlook Excel and Windows are registered trade marks of the Microsoft Corporation gt NAVIGON is a registered trade mar
43. es 42 6 6 4 EE 44 6 6 5 Map in Destination search mode 45 6 7 Useful func se OE ege ed AR GE adie AT 6 7 1 Emergency ServiceS eie EE ee Ee ee Re AE ee EE nnns AT 6 7 2 GPS Status saving the current location AT 67o Tam eh Tum EISE ek ES vom hanes Re OE RE ee ei 48 6 7 4 TMC Traffic Information iese ee ee RR EE RR ee ee RR ee ee RR EE 49 Mr Be ee AE RE 50 Handsfree Module ME N hee Ke ee RE ER ea enti ee ee 51 7 1 Connecting to a telephone NENNEN 52 e E iore Ner Tp HM KE 52 7 4 WAKING area EEN 53 7 3 1 Dialling a telephone number 53 IV Table of contents User s manual User s manual NAVIGON 81xx 7 3 2 Dialling a Speed Call number to call home 53 7 3 3 Calling a contact from the phone book 53 7 3 4 Calling most recently dialled received or missed numbers 53 7 3 5 Transferring a call from your mobile telephone iese sesse 54 FAL Rtl Le EE 54 7 4 1 Moving the navigation application to the foreground od PAZ Entering numbers ie ER Ge Ec N Ed Yu DE XO air ee Ee ER od 7 4 3 Transferring a call to the mobile phone 54 LAA Endino die Mar HE 55 7 5 Configuring the hands free function ee ee AR AA AR ee ee 55 Tod LU 55 7 5 2 Handsfree Settings EE 56 Tao Blyefooth Funch EEN 56 7 6 Connection with Mobile Hhone ANEREN 57 7 6 1 Establishing a connection from the navigati
44. estimated trip time is given for each leg of the route The same data are also displayed for the entire route Simulating routes It is also possible simply to simulate navigation on a planned route Note GPS reception is not necessary for simulation If you have planned a multi leg route only the first leg will be simulated You have calculated and displayed a route gt Tap on Options gt Simulation The route will be recalculated for simulation purposes Simulation starts when calculation has finished Stopping simulation 6 4 7 You can stop simulation at any time gt Tapon uum Back The ROUTE PLANNING window opens Starting navigation You have calculated and displayed a route Route Profile Navigation The route is calculated on the basis of a route profile If you want to view or change the route profile tap on Route Profile Note If you change the route profile the changes will also apply to future navigations Information about individual route profile settings can be obtained by tapping the related i Help button 37 User s manual NAVIGON 81xx Turn by Turn List A If you want to see detailed directions for the route tap on Options gt Turn by Turn List For details of the functions in the TURN BY TURN LIST window refer to chapter Turn by Turn List on page 48 Start Navigation gt Tap on Start Navigation or simply start driving No GPS reception 6 5 If
45. estinations are not deleted The software is re started and behaves as if started for the first time after being purchased Refer to Switching on the NAVIGON 81xx on page 15 FM Transmitter You can listen to driving instructions and music from the NAVIGON 81xx over the car radio s loudspeaker system Refer to page 63 4 Password Lock You can protect your navigation system from unauthorised use by creating a password 4 1 Activating password protection 1 In the START window tap on Options Password Lock The NEW PASSWORD window opens Enter a new password in the New password box Enter this password again in the Confirm new password box Tap on Activate Note The password must have exactly 4 digits 4 2 Changing a password 1 16 In the START window tap on Options Password Lock The ENTER PASSWORD window opens Enter the currently valid password in the Enter password box Tap on Change password The NEW PASSWORD window opens Enter a new password in the New password box Enter this password again in the Confirm new password box Tap on Activate Password Lock 4 3 4 4 User s manual NAVIGON 81xx Note The new password must have exactly 4 digits Cancelling password protection 1 In the START window tap on Options Password Lock The ENTER PASSWORD window opens 2 Enter the currently valid password in the Enter password box 3 Tap on Deactivate Forgotten your password I
46. et comes first e g the USA Canada Australia South Africa then the INPUT SEQUENCE menu will open 1a Select whether you would like to enter the street first and then the location Street First or first the location and then the street City First Note The following description is based on City First as the order for entering the address The ADDRESS window opens 2 Enter the name or the postal code of the destination town 3 Enter the name of the destination street 4 Enter the house number If you do not know the number of the house then leave this box empty If you do not know the house number but know the name of a nearby side street then tap on the Cross Street box and enter the name of this street The navigation system will calculate a route to the intersection of the streets you have entered 295 User s manual NAVIGON 81xx 6 2 3 26 Note It is not necessary to enter all the address details If you specify the town only the navigation system will calculate a route to the town centre If you specify only the town and street without specifying a house number or cross street the navigation system will calculate the best route to this street 5 Tap on Start Navigation Sometimes the destination cannot be found exactly because for example the entered combination of place and street name exists several times In this case a window will open with a list of all the addresses matching you
47. f interest Points of interest also called POI Points Of Interest for short are useful addresses that are catalogued according to particular criteria Special destinations include ports airports restaurants hotels petrol stations public buildings doctor s surgeries hospitals shopping centres etc POI can be represented on the map by symbols Tap in the NAVIGATION window on Options Settings POI in order to select the categories you want to appear on the map POI nearby Navigation POI nearby are special destinations located within a certain radius of your current location This means you can always find the nearest petrol station for example no matter where you are Note GPS reception must be good enough for determining your position Check the x GPS Ready icon to see whether GPS reception is good enough For details refer to chapter Initialising the GPS receiver on page 23 Note The Direct Access section offers 3 categories of POI from the current vicinity which can be searched for quickly and without additional entry For details refer to chapter Direct access to POI on page 29 1 Tap in the NAVIGATION window on New Destination gt Search for POI Nearby The POI NEARBY window opens 2 Select a category from which you would like to find a POI If sub categories exist for the category you have selected the Sub Category list opens 3 Select the sub category from which you would like
48. f you have forgotten your password proceed as follows 1 Tap on Info 2 Follow the instructions on the screen Operating the NAVIGON 81xx Volume On the case of the NAVIGON 81xx you will find the following keys refer to Description of the NAVIGON 81xx on page 8 Quieter Louder 7 Volume on off You can use these keys to adjust the volume of the currently audible application During a call You can use the keys to adjust the volume of the phone call If an audio file is being played back at this moment it will be muted for the duration of the call If navigation instructions are being given at this moment they will be muted for the duration of the call During navigation You can use the keys to adjust the volume of the navigation instructions If an audio file is being played back at this moment the keys will also affect the volume of the MP3 player Operating the NAVIGON 81xx 17 User s manual NAVIGON 81xx During play back of an audio file You can use the keys to adjust the volume of the MP3 player Other cases In all other cases the keys have no effect 5 2 Information Various information icons are located at the top of many windows GPS The GPS icon is visible only in the navigation application It can indicate the following GPS reception states No GPS No symbol The built in GPS receiver is not operational Contact customer service if the problem persists k No Signal Data
49. gt Tap on Route Profile in order to view and if required change the settings which form the basis for the route planning gt Tap on Start Navigation to start the trip If you display a planned or loaded route the route may be recalculated The starting point for the calculation will now be your current location You will first be guided to the first route point entered gt Tap on Options gt Turn by Turn List to view detailed directions for the route Refer to Turn by Turn List on page 48 gt Tap Destination search to view the map in Destination search mode Refer to Map in Destination search mode on page 45 44 User s manual NAVIGON 81xx 6 6 3 KR Go N 42 Map in Navigation mode After the route was shown in Preview mode navigation was started The map opens in Navigation mode AS F RTH POPPENREUTH A73 FRANKENSCHNELLWEG __ 02 47 BLUR EN EN ENE Here you can see the signposting which you must follow Here you can see any speed limits which are in force The route is highlighted in orange When two manoeuvres need to be executed in quick succession the small arrow box indicates the second manoeuvre to be executed The large arrow box shows a schematic depiction of the next junction at which you must make a turn The distance remaining to this junction is indicated underneath As you get closer to the junction you will see a spot diagram in addition to the distance
50. hanges will also apply to future navigations For information about individual route profile settings tap on the related i button Help Navigation User s manual NAVIGON 81xx Turn by Turn List A gt If you want to see detailed directions for the route tap on Options gt Turn by Turn List For details of the functions in the TURN BY TURN LIST window refer to chapter Turn by Turn List on page 48 Start Navigation gt Tap on Start Navigation or simply start driving No GPS reception 6 3 6 3 1 Navigation If GPS signal reception is not good enough the following message will appear GPS reception is currently not sufficient Navigation starts automatically as soon as GPS reception is OK again You have the following options Wait As soon as GPS reception is good enough for determining your position the route will be recalculated and navigation will begin gt Tap on Cancel The window in which you entered your destination will open again Your destination is saved in the LAST DESTINATIONS list gt Tap on Demo The route will be calculated using the centre of the destination location as starting point Navigation will then be simulated on this route Tap on e mm Back in order to terminate the demonstration Note The Demo button is not available if you selected the destination on the map Managing destinations Every destination you enter and destinations from the LAST DESTI
51. hl Slide Show Shows all the pictures in the current folder one after the other mA Exit Closes the picture viewer 9 5 Play back mode From the PICTURES window you can start two play back modes Full Screen gt Tapon Full Screen The picture is scaled to its maximum size You can use the F button Next and the button Previous to switch to the other pictures in the current folder gt Tap on the picture in order to close complete picture mode Slide Show gt Tapon Slide Show Starting with the current picture all the pictures in the current folder are shown for several seconds one after the other The pictures are scaled to their maximum size When all the pictures in the current folder have been shown the presentation continues from the beginning gt Tap on the middle of the picture in order to close the show again 10 FM Transmitter With the FM transmitter you can listen to all audio outputs from the NAVIGON 81xx over the loudspeakers of the car radio This applies to the navigation instructions music from the MP3 player and phone calls with the hands free module Caution Operation of the FM transmitter is not allowed in the following countries France Greece Italy Ireland Latvia Malta Norway Slovakia Hungary and Cyprus about the regulations in force there In some countries it is against the law to operate FM transmitters i Caution Before you use the FM transmitter
52. hone The NAVIGON 81xx has no Bluetooth connection to another device Operating the NAVIGON 81xx 19 User s manual NAVIGON 81xx E Connected white mobile phone The NAVIGON 81xx is connected to a mobile phone and can be used as a hands free car kit Call in Progress green mobile phone The hands free module of the NAVIGON 81xx is being used at the moment for a call FM Transmitter The NAVIGON 81xx has an integrated FM transmitter This means that you can listen to all audio outputs via the car radio s loudspeakers This applies to the navigation instructions music from the MP3 player and phone calls with the hands free module The FM Transmitter icon can indicate the following states of the integrated battery No Signal No symbol The FM transmitter is deactivated FM Transmitter The FM transmitter is activated You can listen to audio outputs from the device via the car radio To do so you must set the radio to the frequency of the FM transmitter and the NAVIGON 81xx must not be too far from the vehicle s antenna For details of the FM transmitter s functions refer to chapter FM Transmitter on page 63 Muting dx 5 3 E The Muting icon is visible only in the navigation application It can indicate the following states No symbol The navigation application is not muted Muting The navigation application is muted If the device is navigating at the moment you will not hear any driving instruction
53. iewed here quickly and without further entry gt Tap in the NAVIGATION window on Options gt Settings gt POI in order to select the categories for direct access Note GPS reception must be good enough for determining your position Check the x GPS Ready icon to see whether GPS reception is good enough For details refer to chapter Initialising the GPS receiver on page 23 1 In the NAVIGATION window tap on New Destination The NEW DESTINATION menu opens In the Direct Access area you are shown the icons of those POI catgeories that are available by direct access 2 Tap on the category from which you would like to select a POI The Name of the Destination list opens It contains the nearest POI in the specified category sorted by distance 3 Tap on the name of the destination The map opens in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 29 User s manual NAVIGON 81xx 6 2 5 6 2 6 6 2 7 BEIC Information about the destination For many destinations that you specify there will be further information available stored in the navigation system s database There is for example a telephone number available for many restaurants You can then call the restaurant to reserve a table for example One of the destination entry windows described above is open gt Tapon iQ Destination Info The
54. in another country find out The FM transmitter is operated via the options in the START window FM Transmitter 63 User s manual NAVIGON 81xx Switching on the FM transmitter 1 In the START window tap on Options FM Transmitter 2 Tapon On 3 Follow the instructions on the screen Note The frequency selected in the FM TRANSMITTER window must be set on the car radio The navigation device must not be too far from the vehicle antenna because the FM transmitter has a transmission range of only a few metres Switching off the FM transmitter 10 1 1 In the START window tap on Options FM Transmitter 2 Tap on Off Configuring the FM transmitter gt Inthe FM TRANSMITTER window tap on Options gt Settings FM The SETTINGS FM window opens Standard Select the settings to be used by the FM transmitter for transmission A 11 64 Europe or USA Caution These standards differ for example in the powers of transmission they define Please note that you are not permitted to transmit with the USA setting in the countries of the European Union Configuring the NAVIGON 81xx The SETTINGS window is the point from which you can start customising the NAVIGON 81xx to match your personal preferences Settings can be accessed via the options in the START window and via the options in many windows of the navigation application gt Tap on Options gt Settings The SETTINGS window of the navigation ap
55. ion safety information ee ee ee RR EE ee RR EE ee RR EE 9 2 3 2 Safety information for the navigation device 9 2 3 3 Safety guidelines when installing the device in your car 10 2 4 Preparing the NAVIGON 81xx for use ee ee aa RR ee ee AR ee ee nne 11 2 4 1 Assembling the mains adapter esse ee ee RR EE ee 11 2 4 2 Charging the rechargeable battery esse ee RR EE ee RR 11 24 3 Memory aard re GE d ara oue ee Ee ed eek bee ME DR di 12 2 4 4 Preparing the navigation system for use 13 29 Navidatind AE 14 3 Switching on the NAVIGON BO ees ee RR RR EE ER REG RR RR KEEN EEN 15 3 1 Options in the Start Le e ia ed EE iiaeia ee ao e SE ed ve Ee ae a 15 4 Password LOCK EE SE ES RE RR We GE AO GE Ee ERA RE ee CER dE 16 4 1 Activating password protectiON ee ee ee Ee ee Ee ee Ee ee ee ee ee Ge 16 4 2 EE elle e e e DEE EE 16 4 3 Cancelling password protection ie ee Ee ee EE RR EE ee Ge 17 44 Forgotten your password KE 17 5 Operating the NAVIGON 81XxX csccccsssseessssseeseeseesseeneeseaeneeseaes 17 Sq Mollie es EE ED ED DE ED Dog 17 9 2 are AMON EE 18 mo SolwWaleKeyDOGSEd ME 20 931 ee E 21 532 Entering dA KEEN ER 8 4 ODIOS ie E E 22 EEE EI 22 User s manual Table of contents III User s manual NAVIGON 81xx 6 Navigati n EE 22 6 1 Starting the navigation application RR ee RR ee RR ee ae 23
56. ion to the last connected phone is to be restored automatically Yes or No Example The connection is interrupted as soon as you leave the vehicle It can be restored as soon as you approach the vehicle again Note The settings Discoverable by Others Others May Connect and Reconnect automatically are effective only when the Bluetooth function is activated Note A Bluetooth connection can be established from the mobile phone only when the settings Bluetooth Function Discoverable by Others and Reconnect automatically were all selected with Yes ee 56 Handsfree Module 7 6 7 6 1 7 6 2 User s manual NAVIGON 81xx Connection with Mobile Phone Note The Bluetooth functions of both the NAVIGON 81xx and the mobile phone must be configured accordingly in order for a Bluetooth connection to be established between the two devices For details of how to configure the NAVIGON 81xx refer to chapter Bluetooth Function on page 56 For details of how to configure the mobile phone refer to the related manual The NAVIGON 81xx can establish a connection to only one Bluetooth capable mobile phone As a rule the NAVIGON 81xx will automatically establish a connection to a mobile phone to which it was once connected already However you can also use this function to establish a connection to a different mobile phone while a connection between the NAVIGON 81xx and a mobile phone already exists Establishing a connection fr
57. ions on page 33 Save Route Opens a window in which you can save the planned route under a specific name For more details refer to chapter Saving routes on page 36 Saved Routes Opens a dialog window into which you can load a saved route Settings Opens the SETTINGS window Here you can configure the navigation system For details refer to chapter Configuring the NAVIGON 81xx on page 50 Show Map Opens the map in Destination search mode Here you can select your navigation destination directly on the map For details refer to chapter Selecting destinations on the map on page 32 Show on Map Shows the selected address on the map Navigation 39 User s manual NAVIGON 81xx Simulation Simulates a navigation on the route indicated This simulation can be performed without GPS reception On multi leg routes only the first leg is simulated Traffic Opens the TRAFFIC INFORMATION window in which pending reports are listed For more details refer to chapter TMC Traffic Information on page 49 Turn by Turn List Shows detailed directions for the route including all points at which you must turn For details of the functions in the TURN BY TURN LisT window refer to chapter Turn by Turn List on page 48 6 6 Working with the map 6 6 1 Maps Each country has its own navigation map However seamless navigation over several maps on one continent is possible if a continuous route can be planned on the maps saved
58. is being received from less than three satellites Position cannot be calculated A GPS Ready Data is being received from at least three satellites Position can be calculated For details of the GPS status refer to chapter GPS Status saving the current location on page 47 Compass The Compass icon is visible only in the navigation application It shows you in which direction you are currently moving It can indicate the following points of the compass N NE E SE S SW W NW TMC Traffic Information The NAVIGON 81xx has an integrated TMC receiver which provides the navigation system with traffic information updates Dynamic route changes are possible if necessary e g in order to avoid a traffic jam Note This function is only available if TMC traffic messages are being transmitted in the country in which you are travelling This is not the case in all countries The TMC icon is visible only in the navigation application It can indicate the following TMC reception states A Tuning The TMC receiver is operational but cannot find a station that is transmitting TMC signals There are no active traffic messages 18 Operating the NAVIGON 81xx User s manual NAVIGON 81xx Ay Tuning The TMC receiver is operational but cannot find a station that is transmitting TMC signals Traffic messages are active however This can be the case for example when travelling through a tunnel iy TMC on Standby Traffic messages c
59. k of NAVIGON AG Questions about the product You have a question concerning your product Then visit our webseite www navigon com and click on Support There you will find an area with frequently asked questions FAQ Center along with details of how to contact us by phone or e mail Before you begin Scope of Delivery Please check that the contents are complete If anything is missing get in touch immediately with the dealer who sold you the product The purchased product includes the following gt NAVIGON 81xx navigation device gt Car cradle gt Car charger cable 10 30V adapter for the vehicle s cigarette lighter with integrated TMC antenna gt Power pack 100 240V with plug adapters gt USB cable gt SD card with software and navigation maps the SD card is already inserted in the navigation device gt The present manual gt Leaflet with illustrated installation instructions gt CD with manuals PDF including languages which are not available in printed form and additional programs NAVIGON Fresh for updating the software and NAVIGON Sync for exporting addresses from Microsoft Outlook gt Cloth pouch Before you begin 7 User s manual NAVIGON 81xx 2 2 Description of the NAVIGON 81xx 14 13 12 l 1 d 4 11 2 D e e E 10 3 Wi 4 c 8 9 NAVIGON D NEE T 5 6 7 1 Back 2 Touch screen 3 j Volume on off 4 Y Connection for external GPS antenn
60. nformation 49 Tuning Mode 50 Touchscreen Calibration 16 Trade markKS see se ee ee ee ee ee 7 Traffic Information Recalculate Route 50 Ne 49 TURING Mode otii cot ER s 50 Troubleshooting 68 TURING MOG 6 EE Ee Eg ie 50 Turn by Turn List BIOCK AE tree o i ans b s eis 48 elle EE 33 38 48 V NV OMICS id EE 17 43 51 W Ee EE 6 Index
61. nt folder in ascending order 60 Music 8 5 User s manual NAVIGON 81xx Note When all the titles have been played play back will continue from the beginning To interrupt the play back of audio files you must tap on Stop or MI Pause gt Tapon S dd Shuffle Mode in order to play back the titles in random order gt Tap on this button again in order to play back the titles again in ascending order Music in the background When the MP3 player is playing back an audio file and a different application is moved to the foreground the MP3 player behaves as follows Start window Play back of the file continues Navigation Application in the foreground Play back of the file continues If driving instructions are announced during navigation the volume of the MP3 player is lowered for the duration of the announcement This does not apply when the volume of the MP3 player is very low Handsfree Module in the foreground When an incoming call is signalled or when you establish a connection play back of the file is interrupted It will be continued automatically when the call has ended Picture Viewer in the foreground Play back of the file continues FM Transmitter in the foreground Pictures Play back of the file is interrupted only to transmit a test signal it is then continued automatically Pictures The NAVIGON 81xx can display image files which are saved on the memory card with the navigati
62. om the navigation device 1 Make sure that the Bluetooth function is activated on both the mobile phone and the NAVIGON 81xx 2 In the HANDSFREE MODULE window tap on Settings gt Connection with Mobile Phone New Connection The navigation device looks for Bluetooth devices and lists all the devices it recognises 3 Tap on the name of your mobile phone The navigation device prompts you to enter a password 4 Enter a four digit password any digits in the Key box and tap on OK Your mobile phone prompts you to enter a password 5 Enter the same password as on the NAVIGON 81xx On the NAVIGON 81xx the SETTINGS BT window opens A connection is established between the two devices Tap on qu Back in order to return to the HANDSFREE MODULE window Establishing a connection from the mobile phone Note Please consult the mobile phone s manual if you are uncertain about how to carry out the following steps on the mobile phone 1 Make sure that the Bluetooth function is activated on both the mobile phone and the NAVIGON 81xx Handsfree Module 57 User s manual NAVIGON 81xx 7 6 3 A 58 2 Using your mobile phone search for other Bluetooth devices The navigation device is detected as NAVIGON 3 Initiate a connection to the detected NAVIGON device The mobile phone prompts you to enter a password 4 Enter a four digit password user defined The NAVIGON 81xx prompts you to enter a password 5 En
63. on destinations near the selected point Refer to POI nearby page 27 gt Tapon Destination search in order to quit Destination search mode You will be returned to the window from which you started this mode gt Tapon m need Back in order to return to the NAVIGATION window If you are currently navigating you will be prompted to confirm your decision to quit navigation Useful functions Emergency Services If you arrive at the scene of an accident or have an accident yourself it may be necessary to phone the emergency hotline and give your current location gt Tap on Options gt Emergency Services The EMERGENCY SERVICES window opens If GPS reception is good enough the address and the geographic cooordinates of your current location will be indicated If the NAVIGON 81xx is connected to a mobile phone you can have yourself connected directly to the emergency hotline gt Tap onthe Emergency Services button in red You will now be connected to the emergency hotline If the connection fails a dialog box will tell you which number to dial on your mobile phone in order to get through to the emergency hotline Note In some countries you can get through to the emergency hotline with the number shown only if you use a mobile phone Another number may be necessary for landline calls GPS Status saving the current location In the GPS STATUS window you will find an overview of the data the navigation
64. on device of 7 6 2 Establishing a connection from the mobile phone 57 7 6 3 Terminating the connection and deleting the connection EE 58 E nic 58 Oil i Suitable lies ss eet 59 8 2 Opening the MP3 Be ET 59 8 3 Selecting an audio RTE 59 8 4 Operating the MP3 player ENNEN 60 9 5 Music inthe baekdround EE 61 9 Gei dE 61 91 Suitable TES EE EG ER EE EE eae ER EE ee 62 9 2 Opening the picture viewer 62 9 3 Selecting an image file 62 9 4 Operating the picture viewer 62 9 5 e Ee NOUS io eege 63 10 EM Transmitter uude ee GO debet e rti a 63 10 1 Configuring the FM Iransmtter esse ese ee ee ee RR EE ee AR ee ee RR ee ee RR ee 64 11 Configuring the NAVIGON SGixx ees ee Ee Re RR RR EE RR RR EE ER RR Ee ER Ke 64 K ele Cu Le EEN 66 E Weg lee Ee E WE 66 12 2 Identification and serial number kk 67 12 3 Declaration of confortmity iuit iret argon treu ua rre o eicere x saa 67 13 Jroublesnoolifig s EE N ERE eo ev oe ee tot devo va ma evo e 68 iL MIS quU PUR 70 Users manual Table of contents e V User s manual NAVIGON 81xx 1 Introduction 1 1 About this manual 1 1 1 Conventions For better legibility and clarification the following styles are used in this manual Bold and italics Registered names company and product descriptions SMALL CAPITALS Window and dialogue box titles Bold Highlighting of important parts in the text Underlined Names of buttons input boxes and other el
65. on software 61 User s manual NAVIGON 81xx 9 1 Suitable files The picture viewer can show JPG files PNG files and GIF files no animated GIF files 9 2 Opening the picture viewer You can open the picture viewer only from the START window gt Tap on Pictures 9 3 Selecting an image file gt Inthe PICTURES window tap on Folder The CURRENT FOLDER opens The name of the current folder is indicated at the top Files and sub folders are listed underneath They are identified as follows n Picture File Only those files are listed which can be shown by the picture viewer Refer to Suitable files on page 59 Da Folder Sub folders of the current folder are displayed gt Tap ona sub folder in order to open it Note If the sub folder contains no suitable image files or sub folders it cannot be opened gt Tapon La Up one level in order to open the next higher folder gt Tap on an image file in order to show it gt Tap on Cancel in order to close the CURRENT FOLDER window without selecting a file 9 4 Operating the picture viewer Information area The current image file and its file name are displayed in the information area in the PICTURES window Controls 4 Full Screen Shows the current picture as large as possible P Next Loads the next picture in the current folder ei Previous Loads the previous picture in the current folder 62 Pictures User s manual NAVIGON 81xx
66. phone books You can also dial the number with the mobile phone and then transfer the call to the NAVIGON 81xx Refer to Transferring a call from your mobile telephone on page 54 Troubleshooting 69 User s manual NAVIGON 81xx 14 Index B elei 44 48 Bluetooth see Handsfree Module Bluetooth Function 56 C Call Dial a Number ee ee 53 Phone Book 53 Presel EE 53 Recent Elle eege e 53 Call in Progress Enter numerals 54 Hang OO EE 54 SHOW MAD E EN 54 Use handsfree 54 Use Mobile Phone 54 COMPASS OE d Ene Ur a cadi 18 COMMGUNAUON E 64 Connection with Mobile Phone Clear Connection Data 58 Connection with Mobile Phone 52 56 Contacts oie OE AE AE e 31 Conventions followed in this manual aen 6 Current Position SAVE adco UE Rd AE M een E AT D Data en Es RE N ee 22 Destination ele EE EE EE DE Rs 25 Contacts EE 31 Direct Access 29 Favourite S uoce Dose oco ae eden es 30 EPOR MAD cessio N ae EE EE Ri oi 32 Home Address see ee 31 34 Input Sequence 25 Last Destinations 30 My Destinations 24 New Destination 24 POL ER eae nese er ent ee a nee re 27 70 na Ke Un DEE 28 Nationwide eese 28 NeaFDV MM SaS 27 SAVE utes EE
67. plication has several buttons Current Map POI Basic Settings and Route Profile gt Tap on a button to open the corresponding settings window The settings of the individual windows are distributed over several screen pages You can toggle between these pages with the q To the Left button and the gt To the Right button Configuring the NAVIGON 81xx User s manual NAVIGON 81xx Some settings can have only one of two values These settings can be recognised by the Toggle button All possible values are visible The currently valid value is highlighted in white gt Tapon J Toggle in order to switch between the possible values Some settings can accept several different values These settings can be recognised by the List button The currently valid value is visible 1 Tap on H List A list with all possible values opens The currently valid value is marked 2 Tap on the value you want It is now marked 3 Tapon OK The list closes The new value is indicated For each setting there is a i Help button When you tap on it you will see an exact definition of the setting in question You can close the settings windows in two ways Tap on OK Any changes you have made will be adopted gt Tap Cancel Any changes you have made will not be adopted Configuring the NAVIGON 81xx 65 User s manual NAVIGON 81xx 12 12 1 66 Appendix Technical data Dimensions Weight Oper
68. r hearing Do not hold the loudspeaker of the NAVIGON 81xx directly against your ear Music 8 1 8 2 8 3 Music User s manual NAVIGON 81xx Suitable files The MP3 player can play back MP3 files and WMA files Files which are playback protected in any way DRM Digital Rights Management cannot be played back Opening the MP3 player When the START window is open gt Tap on Music When the hands free module or the navigation application is open gt Tap on the Music button which is located at the bottom edge of many windows The MP3 player cannot be opened in the picture viewer or the FM transmitter Selecting an audio file gt Inthe Music window tap on Folder The CURRENT FOLDER opens The name of the current folder is indicated at the top Files and sub folders are listed underneath They are identified as follows H Audio File Only those files are shown which can be played back by the MP3 player Refer to Suitable files on page 59 5 Folder The sub folders of the current folder are shown gt Tap ona sub folder in order to open it Note If the sub folder has no playable audio files or no sub folders it cannot be opened gt Tapon La Up one level in order to open the next higher folder gt Tap on an audio file in order to play it back gt Tap on Cancel in order to close the CURRENT FOLDER window without selecting a file 59 User s manual NAVIGON 81xx 8 4
69. r entry plus additional information If the entered house number is not included on the map the window will show an address with the house number closest to the one entered gt Tap on the address to which you want to navigate The map opens in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 Selecting the destination address by voice command It is particularly convenient to select the destination address by voice command 1 In the NAVIGATION window tap on Voice Command The VOICE COMMAND window opens Indicated at the top is the country from which you can select addresses gt Tap on the country if your destination address is situated in a different country Then follow the instructions given by the navigation system You will be asked for the address data in this order City gt Street gt House number 2 Follow the instructions given by the navigation system When you have finished entering the address the map will open in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 Navigation 6 2 4 User s manual NAVIGON 81xx Note The Voice Command function is not available for every language In the languages for which this function is not available the Voice Command button is replaced by the Show Map button Points o
70. roblems occurring when trying to establish a Bluetooth connection can have various causes Bluetooth is dectivated in the hands free module of the NAVIGON 81xx Activate Bluetooth Make sure that the NAVIGON 81xx can be detected by other Bluetooth devices Refer to Bluetooth Function on page 56 gt Bluetooth is deactivated on the mobile phone or it is set to Hidden Activate Bluetooth on your mobile phone Make sure that your mobile phone can be detected by other Bluetooth devices For more details refer to your mobile phone manual p gt It may be that the NAVIGON 81xx was never connected to your mobile phone before Initiate the connection manually Refer to Connection with Mobile Phone page 57 If the NAVIGON 81xx is still unable to establish a Bluetooth connection to your mobile phone contact your mobile phone manufacturer s customer support Taking a call When you receive a call the INCOMING CALL window will open You will be asked whether you want to take the call The name and the number of the caller will be displayed if this information is available gt Tap on Yes if you want to take the call The CALL IN PROGRESS window opens gt Tap on No if you do not want to take the call Note Play back of the MP3 player and the navigation instructions are muted during a call Handsfree Module 7 3 7 3 1 7 3 2 7 3 3 e 7 3 4 e User s manual NAVIGON 81xx Making a call With th
71. s Note This icon indicates only the muted state of the navigation instructions It says nothing about the MP3 player or the hands free system Software keyboard A software keyboard appears on the screen when text entries are necessary All entries can be made on the software keyboard using your fingertips Only capital letters can be entered When entering town or street names you need not enter any special characters or umlauts The navigation system fills in these characters for you automatically If for example you are searching for Wurzburg Operating the NAVIGON 81xx User s manual NAVIGON 81xx then simply enter WURZBURG Special characters may be helpful however when naming saved destinations and routes 5 3 1 Special keys bd inserts a space M m the character in front of the cursor 123 opens the keyboard with numerals Latin Cyrillic and Greek alphabet ABC opens the keyboard with the Latin alphabet ABB opens the keyboard with the Cyrillic alphabet ABr opens the keyboard with the Greek alphabet When you want to enter addresses names or special destinations the keyboard with the alphabet for the country in question will open automatically When you want to save a destination to Favourites or when you enter a special destination category or a country the keyboard with the alphabet of the user interface will open automatically You can also switch from the Cyrillic or Greek keyboard to th
72. sage to display this information in detail The navigation system can Detour Ki or Ignore 1 congestion on the route The button shows the active status gt Tap on the button to select the alternative setting gt Tapon Back in order to close the TRAFFIC INFORMATION window again 49 User s manual NAVIGON 81xx TMC Settings In the TRAFFIC INFORMATION window tap on Options Traffic In the TRAFFIC INFORMATION window you can set the TMC traffic station and configure whether the reception of a traffic message concerning your route should affect your route planning and if so how Tuning Mode Tap on Tuning Mode and select a method for selecting the TMC radio station Automatic You can use the arrow buttons in the station area to select another station The system will search for another station if reception becomes poor Hold station You can use the arrow keys in the station area to select another station The system will search for the same station on a different frequency if the signal becomes poor Hold frequency You can use the arrow keys in the station area to select another frequency The system will not search for another station if reception becomes poor Recalculate Route Tap on Recalculate Route and select how new traffic messages concerning your route are to be used 6 7 5 50 gt Automatically An alternative route will be calculated automatically The system
73. splash water Caution Do not open the case of the navigation device under any circumstances Caution Do not expose the navigation device to extreme heat or cold This may damage the device or impair its function See Technical data page 66 Caution Use only the charger provided or one that has been approved by the manufacturer Connect the charger to a suitable power supply The voltage requirements can be found on the device case and or the packaging Note Do not kink the cable Make sure that the cable cannot be damaged by sharp edged objects Before you begin 9 User s manual NAVIGON 81xx PPPPPP eoeoocceO 10 Note Clean the navigation device only with a damp cloth Note Do not unplug by pulling on the cable Doing so could damage the cable Note If you want to transport the navigation device use the cloth pouch provided in order to protect the touch screen from scratches Note Create a backup of the data contained on the memory card provided This is very easy to do with the NAVIGON Fresh software which is included on the CD provided or can be downloaded free of charge from our webseite www navigon com Note The memory card must remain inserted in the device during operation of the navigation system Note Use only SD or MMC memory cards Make sure that the memory card contacts are clean and undamaged Safety guidelines when installing the device in your car Caution Fasten the cradle so that th
74. system calculates from the GPS signals it receives The GPS status can be accessed from the options button in many windows gt Tap on Options gt GPS Status The current location can be saved in the FAVOURITES list 1 Tap on Save Position 47 User s manual NAVIGON 81xx 6 7 3 48 The SAVE DESTINATION AS dialog box opens 2 Enter a name for the destination 3 Select whether you want to save your current position as the home address 4 Tap on Save Turn by Turn List You can display detailed directions of the calculated route before starting navigation or at any time during navigation This list displays all of the driving instructions in table form The map is open in Preview mode Navigation mode or Reality View mode gt Tap on Options gt Turn by Turn List The TURN BY TURN LIST window opens 1601 7 At exit F RTH POPPENREUTH take the exit yd right 254 rd ele Tum left 73 ji Carry straight on onto POPPENREUTHER yd STRASSE x 220 ls mean E yd N RNBERG 2 8 mi Arrival 12 51 4 Options Schematic depiction of the next junction where you must make a turn Distance to this junction Route instruction and if available the name of the street into which you must turn Indicates whether you want to drive on the route section in question or not ke Allow The section in question is allowed on the route v Ki Forbid The section in question is not allowed on the rou
75. t further to the back Example route point 2 becomes route point 3 LI Delete Deletes the selected route point A dialog window prompts you to confirm deletion 6 4 4 Managing routes You can save each planned route under a particular name Note Only the start point and route points will be saved not the calculated route When you load a saved route it must be recalculated before navigation can start You can load rename or delete stored routes Saving routes The ROUTE PLANNING window is open You have entered the starting point and at least one route point 1 Tap on Options Save Route 2 Enter a name for the route 3 Tap on Save The route is now saved to the SAVED ROUTES list The dialog window closes Loading routes 1 Tap on Options Saved Routes 2 Tap on the route that you want to load 3 Tap on Load Route The ROUTE PLANNING window opens The starting point and the route points of the loaded route have been entered 96 Navigation 6 4 5 6 4 6 User s manual NAVIGON 81xx Calculating and displaying routes It is possible to calculate and display a planned route on the map even without GPS reception in order to get an impression of the journey The ROUTE PLANNING window is open The starting point and at least one route point have been entered 1 Tap on Show Route The map opens in Preview mode The starting point and the route points are marked by flags The distance and the
76. tails of how to start navigation refer to chapter Starting navigation on page 32 POI in a particular location POI in a particular location can be useful when navigating in an unfamiliar town EDU 1 In the NAVIGATION window tap on New Destination Search for POI gt ina Town The POI IN ATOWN window opens Enter the name or the postal code of the destination town Select a category from which you would like to find a POI If sub categories exist for the category you have selected the Sub Category list opens Select the sub category from which you would like to select a POI Navigation s User s manual NAVIGON 81xx The Name of the Destination list opens It contains POI from the specified category sorted alphabetically 5 Tap on the name of the destination 6 Tap on Start Navigation Sometimes the destination cannot be found exactly because for example several restaurants with the same name exist In this case a window opens with all the destinations matching your entry plus additional information gt Tap on the destination to which you would like to navigate The map opens in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 Direct access to POI s Navigation The direct access area contains 3 categories of POI Destinations in your vicinity that correspond to one of these categories can be v
77. te Navigation User s manual NAVIGON 81xx Blocking route sections 1 Tapon the route sections that you do not want to travel on so that TA the Ki Forbid symbol appears next to them 2 Tap on mami Modify Route The navigation system calculates an alternative route avoiding the route sections selected The new driving instructions are displayed in the TURN BY TURN LIST window 3 Tapon qe Back in order to close the TURN BY TURN LIST window again Removing blocks and using original routes 6 7 4 Section blocks can be removed at any time gt Inthe TURN BY TURN LIST window tap on Options gt Calculate Original Route TMC Traffic Information The integrated TMC receiver enables the navigation system to make use of current traffic messaging If necessary it can change your route dynamically for example in order to avoid a traffic jam Displaying traffic information Navigation Current traffic information is available via the options button in many windows 1 Tap on Options Traffic The TRAFFIC INFORMATION window opens Above the list the Traffic Information button indicates the type of traffic information listed and how many messages of this type there are in the list 2 Tap on Traffic Information in order to select which messages you want displayed For each traffic message in the list you are shown information about the location of the traffic obstruction and its type gt Tap ona mes
78. terthe same password in the Key box as on the mobile phone and tap on OK The HANDSFREE MODULE window opens A connection is established between the two devices The name of the connected mobile phone is displayed at the bottom edge of the screen Terminating the connection and deleting the connection data You can terminate the connection between the NAVIGON 81xx and the mobile phone at any time Note You don t need to terminate the connection manually The connection is terminated automatically when the mobile phone is moved a distance of approximately10 m from the NAVIGON 81xx In this case the connection data are saved so that the connection can be restored automatically when the mobile phone is close enough to the NAVIGON 81xx again 1 In the SETTINGS BT window tap on Connection with Mobile Phone gt Clear Connection Data You will be prompted to confirm that you want to terminate the connection 2 Tapon the OK button Note After the connection is terminated the NAVIGON 81xx is no longer able to establish an automatic connection to a mobile phone including the same mobile phone as for the last connection You must establish the next connection to a mobile phone manually refer to chapter Connection with Mobile Phone on page 57 Music The NAVIGON 81xx can play back audio files which have been saved on the memory card with the navigation application Note Listening to music too long and too loud can damage you
79. to open the CALL IN PROGRESS window Transferring a call to the mobile phone gt Inthe CALL IN PROGRESS window tap on Options gt Use Mobile Phone Pick up the mobile telephone and continue the call Handsfree Module 7 4 4 1 9 7 5 1 User s manual NAVIGON 81xx Ending the call gt Tap in the CALL IN PROGRESS window on the Hang up button in order to end the call Configuring the hands free function The hands free module of the NAVIGON 81xx contains a number of settings that can be individually configured For information about configuring the settings in this window refer to Configuring the NAVIGON 81xx on page 64 Preset The hands free module of the NAVIGON 81xx contains four Speed Call buttons that can be individually configured 1 In the HANDSFREE MODULE window tap on Settings gt Preset The MODIFY PRESET window opens 2 Tap on the Speed Call button that you want to edit Entering a new Speed Call number or editing an existing Speed Call number 3 Tap on the Edit button 4 Enter the name and the number for the selected Speed Call button or edit the existing name and number 5 Tap on OK Adopting a number from the phone book of the mobile phone 3 Tap onthe From Phone Book button This button is deactivated when no connection exists to a mobile phone 4 Tap on the entry you want to adopt for the Speed Call button 5 Tap on OK Deleting a Speed Call number 3 Tap on the Delete
80. to select a POI The Name of the Destination list opens It contains the nearest POI in the specified category sorted by distance 4 Tap on the name of the destination 5 Tap on Start Navigation Sometimes the destination cannot be found exactly because for example several restaurants with the same name exist 27 User s manual NAVIGON 81xx s In this case a window opens with all the destinations matching your entry plus additional information Tap on the destination to which you would like to navigate The map opens in Preview mode The destination is indicated on the map For details of how to start navigation refer to chapter Starting navigation on page 32 POI of nationwide significance POI of nationwide significance are airports sights national monuments large ports etc This way you can find well known places of interest even if you don t know the name of their location s 1 In the NAVIGATION window tap on New Destination Search for POI Nationwide The POI NATIONWIDE window opens Select a category from which you would like to find a POI The Name of the Destination list opens It contains the POI from the selected category sorted alphabetically If the list is very long you can shorten it by entering a few letters of the destination Tap on the name of the destination Tap on Start Navigation The map opens in Preview mode The destination is indicated on the map For de
81. will inform you on the recalculation On Request A window opens with information about the location and type of traffic obstruction You can then decide whether an alternative route is to be calculated or not Logbook You can use the NAVIGON 81xx to record a logbook The logbook is recorded in the Logbook xls file You can open the file with Microsoft Excel Each recorded trip is added at the bottom of the table as a new entry The first time a trip is recorded the Logbook xls file will be created in the Navigon ogbook folder on the memory card in the navigation device If you delete or move this file a new file will be created when you next record a trip Note Trips are recorded simultaneously in another file which is compatible with the WISO Sparbuch program This file is called MN7DriversLog bin It can also be found in the Navigon Logbook folder on the memory card in the navigation device Navigation User s manual NAVIGON 81xx Recording trips You can have all trips recorded automatically 1 Tap in the NAVIGATION window on Options gt Settings gt Basic Settings 2 SetLogbook to Yes 3 Tap on OK Every trip from now on will be recorded until you reset Logbook to No lt is possible however to exclude individual trips from the recording Before a trip If your trips are recorded in the logbook a window for entering the trip s Key data is opened before navigation starts You can also decide however

Navigon 81XX GPS Receiver User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents