Morphy Richards NO NUMBER Iron User Manual
Contents
1. Your two year guarantee It is important to retain the retailers receipt as proof of purchase Staple your receipt to this back cover for future reference Please quote the following information if the product develops a fault These numbers can be found on the base of the product Model no Serial no All Morphy Richards products are individually tested before leaving the factory In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced If the fault develops after 28 days and within 24 months of original purchase you should contact the Helpline number quoting Model number and Serial number on the product or write to Morphy Richards at the address shown You will be asked to return the product in secure adequate packaging to the address below along with a copy of proof of purchase Subject to the exclusions set out below see Exclusions the faulty appliance will then be repaired or replaced and dispatched usually within 7 working days of receipt If for any reason this item is replaced during the 2 year guarantee period the guarantee on the new item will be calculated from original purchase date Therefore it is vital to retain your original till receipt or invoice to indicate the date of initial purchase Morphy Richards products are intended for household use only Morphy Richards has a policy of continuous improvement2. e This guarantee is valid in the UK and Ireland only morphy richards The After Sales Division Registered address Morphy Richards Ltd Mexborough South Yorkshire England S64 8AJ Helpline office hours UK 0870 060 2615 Republic of Ireland 1800 409119 441 3752 53 Rev 3 O L M E TCt CNENNC YY lon iron steam spray shot BA Please read and keep these instructions 9870 060 2615 0870 167 6646 reiano 1800 409119 morphy richards 2year CE www morphyrichards co uk pf Important safety instructions The use of any electrical appliance requires the following common sense safety rules Primarily there is danger of injury or death and secondly the danger of damage to the appliance These are indicated in the text by the following two conventions WARNING Danger to the person IMPORTANT Damage to the appliance In addition we offer the following safety advice Location e Do not use outdoors Children e Children do not understand the dangers associated with operating electrical appliances Never allow children to use this appliance e Close supervision is necessary when any appliance is used near children Personal safety e Burns can occur from touching hot metal parts hot water or steam Use caution when you turn a steam iron upside down there may be hot water in the water tank e Do not use the vertical steam feature on clothes that are being
3. to the temperature required but don t start ironing immediately If you wait a few minutes the iron will stabilise at the required setting Your Morphy Richards iron is fitted with an indicator light which will go on and off while you are ironing B z z 3 This is perfectly normal as it shows that the iron is maintaining the heat setting you have chosen It is always a good idea to begin with cool fabrics and work up to higher settings An iron heats up quicker than it cools down so you ll save time and electricity Features of your iron Temperature indicator light The indicator light shows that the iron is warming up When the required temperature is reached the light will go out and will cycle on off during operation Dry ironing You can use your iron as a dry iron only Make sure the variable steam control is set to the amp symbol Any temperature setting may be used depending on the garment The spray feature may be used provided there is water in the tank see filling section You do not need to put any water in the tank when dry ironing only Spray Press the spray button and aim the spray of water at stubborn creases You can do this whilst dry ironing providing there is water in the tank When using the water spray it may be necessary to push the button a few times to get the spray pump primed Variable steam Fill the iron with water as described in Fill
4. only be used on garments which are suitable for ironing at the 2 and 3 dot settings When ironing with the steam facility at the 2 dot setting the steam output should be set at the lower end of the steam range see variable steam section Textiles and clothes are supposed to carry ironing instructions If they don t you should follow the fabric guide on page 3 but be sure to test the temperature by ironing the hem of the garment or similar area first If you turn the control dial down from a hot setting to a cooler setting wait until the iron temperature has stabilised before you continue ironing 1 Make sure that the iron is not plugged in and then set the variable steam control to the amp position before filling the iron with water 2 Push the filler cap release button and lift up the fill cap Fill the water through the filling hole into the water tank using the beaker provided EY One beaker fills the tank 275 ml After filling replace the fill cap In hard water areas the use of distilled or demineralised water is recommended Never use battery topping up fluid or water containing any substances like starch or sugar or defrosted water from a refridgerator 3 Always pour out the remaining water after use Warning When filling your iron with tap water always use the beaker provided Never fill directly under the tap Plug in the iron and switch on Set the temperature control dial E
5. to deal with your query quickly e Name of the product e Model number as shown on the underside of the appliance 0870 060 2615 0870 167 6646 p 1800 409119 No drip system Your iron is fitted with a no drip system which is designed to prevent water escaping from the soleplate when the iron is too cold During use the no drip system may emit a loud click particularly during heat up or whilst cooling down This is perfectly normal and indicates that the system is functioning correctly Anti scale system certain models only The anti scale cartridge is designed to reduce the build up of limescale which occurs during steam ironing this will prolong the working life of your iron However please note that the anti scale cartridge will not completely stop the natural process of limescale build up Using your anti scale iron for the first time If you are using your iron for the first time you will notice that there is no anti scale sachet present in the anti scale cartridge To keep the granules in optimum working condition they are stored in an air tight container located in the packaging of your iron To activate the anti scale system you must place the anti scale cartridge with sachet as described below Refilling intervals How often you need to refill your anti scale cartridge depends on how often you use your iron with its steam functions and how hard your water supply is Water hardness varie
6. with the skin remove particles and wash with water Do not remove the anti scale cartridge from the iron unless the tank is empty When filling ensure that the iron is disconnected from the electrical socket and that the cartridge is inserted correctly Special instructions If your iron does not work check the following points Has the temperature control been set to the required temperature Is the plug in its socket Is the plug itself or the socket faulty Check by plugging in another appliance Emptying and storing When you have x finished ironing a unplug your iron Ensure that the variable steam control is set at the position lift up the fill cap and empty any remaining water out of the filling hole Do not store in the box but in an upright position so that any drops of water remaining cannot leak out and discolour the soleplate Important The flex can be damaged if wound too tightly around the iron after use Make a loose loop with the flex and wrap it around the iron The iron must be cool before winding the flex and storing on its heel Maintenance Jet cleaning Your iron has a built in cleaning system designed to keep the water valve steam chamber and steam vents clear of lint and loose mineral deposits The jet clean should be operated after each period of ironing To operate ensure that there is little water in the tank place the iron on its heel and t
7. worn e Do not leave the iron unattended whilst plugged in or on an ironing board Never allow the mains lead to over hang the work surface e The socket should always be off before plugging or unplugging from the socket Never yank the cord to disconnect from the socket instead grasp plug and pull to disconnect e Do not allow the cord to touch hot surfaces Let the iron cool completely before putting away Loop cord loosely around the iron before storing Job lon 441375253 Rev 3 Color Composite Signature 1 Sheet 1 Back Plate 2 Other safety considerations Use the iron only for its intended use To protect against the risk of electric shock do not put the appliance in water or in any other liquid Always disconnect the iron from the electrical socket when filling with water or emptying and when not in use Do not operate the iron with a damaged cord or if the iron has been dropped or damaged To avoid the risk of electric shock do not disassemble the iron but telephone Morphy Richards for advice Incorrect reassembly can cause a risk of electric shock when the iron is used Anti scale models only Keep the anti scale sachet out of reach of children Wipe up spilt anti scale granules immediately If the granules come into accidental contact with the eyes flush them with water for at least 15 minutes and remove all particles Consult a physician if irritation persists If the granules come into contact
8. e pointer aligns with the marker on the iron and it is closed wo flush tight 8 Your iron is now ready to 9 use and the water tank can be filled e WARNING when not in use your iron should never be placed flat and left on an ironing board e To prevent damage to the textile being ironed follow the temperature guide carefully Test the inside of the hem of the garment e When ironing is complete remove the plug from the socket empty any remaining water from the tank and allow to cool before storage e If you drop or severely knock your iron this could cause internal damage even if the outside appears alright Have it checked by a qualified electrician e tis recommended that you use up one beaker of water by operating your iron s steam and shot of steam functions before ironing any clothes as some dripping may occur while your irons steam system is activated Instructions for use Temperature guide Electrical requirements Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A C Alternating current If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted WARNING The plug removed from the mains lead if severed must be destroyed as a plug with a bared flexible cord is hazardous if engaged into a live socket
9. in product quality and design The company therefore reserves the right to change the specification of its models at any time Job lon 441375253 Rev 3 Color Composite Signature 1 Sheet 1 Front Plate 1 ye To qualify for the 2 year guarantee the appliance must have been used according to the manufacturers instructions For example kettles should have been regularly descaled EXCLUSIONS Morphy Richards shall not be liable to replace or repair the goods under the terms of the guarantee where 1 The fault has been caused or is attributable to accidental use misuse negligent use or used contrary to the manufacturers recommendations or where the fault has been caused by power surges or damage caused in transit 2 The appliance has been used on a voltage supply other than that stamped on the products 3 Repairs have been attempted by persons other than our service staff or authorised dealer 4 Where the appliance has been used for hire purposes or non domestic use 5 Morphy Richards are not liable to carry out any type of servicing work under the guarantee 6 Plastic filters for all Morphy Richards kettles and coffee makers are not covered by the guarantee This guarantee does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage This guarantee is offered as an additional benefit and does not affect your statutory rights as a consumer
10. ing page 4 and insert the plug into the electrical socket The steam output can be varied from low to high by sliding the variable steam control 4 When using the iron at the bottom of the steam range the steam output should be adjusted to the lowest setting ee OD amp LETT lower steam higher steam The steam facility should only be used on garments which are suitable for ironing at 2 and 3 dot setting Shot of steam Press the shot of steam button to obtain a burst of extra steam for ironing out creases in heavy material such as denim etc The shot of steam can be used whilst dry ironing providing there is water in the tank and the temperature control is set within the steam range Do not use shot of steam at temperatures below the steam range shown on the control Note For optimum steam quality do not operate the shot more than three times in succession Vertical steam Hold the iron in a vertical position between 1cm and 2cm away from the item DJ Press the shot of steam button this will create vertical steam This feature is especially useful for removing creases from hanging clothes curtains wall hangings etc Note For optimum steam quality do not operate the shot more than three times in successior 7 gt D
11. outlet Should the fuse in the 13 amp plug require changing a 13 amp BS1362 fuse must be fitted WARNING THIS APPLIANCE MUST BE EARTHED Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code Symbol mA a 120 C Max Cool ca cl 160 C Max Warm 210 C Max Hot Control knob Do not iron positions at all e ee XXI Fabric Nylon Acetates Wool Polyester Cotton Linen e g Acrilan mixtures e g Rayon Rayon Courtelle Orlon Polyester Cotton mixtures Triacetates e g e g Rayon Linen Tricel Polyester Ironing Iron on wrong side Fabrics requiring this if moisture required use damp cloth Not Acetate setting usually require steam pressing for heavy cotton denim etc With water in tank Dry and spray lt _ __ Steam spray shot of steam gt lt Jetclean _ Without water in tank C Dry ironing gt Job lon 441375253 Rev 3 Color Composite Signature 2 Sheet 1 Back Plate 4 Components of your iron Variable steam control Spray button Shot of steam button Filling hole with cap Filler cap release button Spray nozzle Soleplate Temperature control dial with indicator Water tank Anti scale cartridge certain models only Temperature indicator light red Before use Note The steam facility should
12. s greatly from one area to another For advice on the relative hardness of your water contact your local water supplier If on average you spend 2 hours per week ironing then we suggest you refill your anti scale cartridge as shown in the table If you iron more or less frequently then you should alter the interval between refills accordingly Water hardness Soft Medium Hard Refill interval 6 3 11 2 months Job lon 441375253 Rev 3 Color Composite Signature 2 Sheet 1 Front Plate 3 Replacement anti scale refills To obtain replacement anti scale refills telephone our spares number on 0870 167 6646 Filling Refilling your anti scale cartridge 1 Empty any remaining water from the tank see emptying and storing section 2 Remove the anti scale cartridge from the iron by turning it anti clockwise quarter of a turn and pulling it out Remove the cartridge lid as follows hold the cartridge upright and gently squeeze it by the retaining lugs Gently pull off the lid If you are refilling dispose of the used sachet 4 Remove the anti scale sachet from its packaging Pa 5 Fitthe new sachet into the NS cartridge 6 Replace the lid back on the cartridge by aligning the holes with their lugs a and pressing down until it clicks shut on both sides 7 Insert the cartridge back in its hole Push it in as far as possible making sure it is aligned as shown Turn it clockwise until th
13. urn the temperature control dial to the maximum setting Wait for the temperature indicator light to go out then unplug the iron and hold it about 6 150mm above the sink in the ironing position Press the shot of steam button about 10 times in succession After this cleaning operation empty out any remaining water To clean a stainless steel or anodised soleplate certain models only To keep the soleplate of your iron clean and free of limescale we recommend that you use one of the gentle chrome silver or stainless steel cleaners that are generally available Always follow the manufacturers instructions To clean off melted man made fibres set the iron at 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface To clean a coated soleplate certain models only In the unlikely event of any man made fibre fusing to the soleplate set the iron at the 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface Do not use scouring powder or solution as this could cause damage to the coating To clean the exterior Allow the iron to cool and wipe over with a damp cloth and mild detergent then wipe with a dry cloth Helpline If you have any difficulty with your appliance do not hesitate to call us We are more likely able to help than the store from where you bought it Please have the following information ready to enable our staff
Download Pdf Manuals
Related Search