Moffat GSC 5062 Range User Manual
Contents
1. If after all these checks the problem persists contact your local Service Force Centre quoting the model Mod product number PNC and serial number S N eS This information can be found on the rating plate located on the side of the dishwasher door see picture co ww So that you always have these numbers at hand we recommend you to make a note of them here 18 Moffac Technical data Dimensions Width 59 6 cm Height 81 8 87 8 cm Depth 55 cm Electrical connection Information on the electrical connection is given on the rating plate on Voltage Overall power Fuse the inner edge of the dishwasher s door Water supply pressure Minimum 50 kPa 0 5 bar Maximum 800 kPa 8 bar Capacity 12 place settings Max weight 41 kg Noise level 55 dB A Consumption values The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes Programme Programme duration Energy Water minutes ALO litres Normal 65 108 118 1 7 1 8 24 26 Quick 65 25 30 0 7 0 8 8 Bio 50 Test programme for 160 1 05 18 Test Institutes Rinse and Hold 12 lt 0 1 4 Hints for Test Institutes Testing in accordance with EN 60704 must be Test in accordance with EN 50242 must be carried out with appliance fully loaded and carried out when the salt container and rinse using the test2. Load cutlery For best results we recommend you to use the cutlery grid provided if the size and dimensions of the cutlery allow it 12 Place knives and other items of cutlery with sharp points or edges with their handles facing upwards Risk of injury Load the lower basket Arrange serving dishes and large lids around the edge of the basket Load upper basket Light items plastic bowls etc must be loaded in the upper basket and arranged so they do not move Moffat AGT JIJINI VV AY Ce If plates are to be loaded in the upper basket load them starting from the rear positions tilting them slightly forwards and avoiding the front positions near the door Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position Maximum height of the dishes in upper basket lower basket With upper basket raised 20 cm 31 cm With upper basket lowered 24 cm 27 cm IMPORTANT When the basket is in the higher position you will not be able to use the cup rack Move the front runner stops A of the upper basket outwards and slide the basket out Refit the basket in the higher position and replace the stops A in their original position Filling with detergent IMPORTANT Only use detergents suitable for dishwashers
3. to the Service Force centre covering your post code area For the address of your local Service Force Centre and further information about Service Force please visit the website at www serviceforce co uk Before calling out an engineer please ensure you read the details under the heading Something not working When you contact the Service Force Centre you will need to give the following details 1 Your name address and post code 2 Your telephone number 3 Clear and concise details of the fault 4 The model and serial number found on the rating plate 5 The purchase date Guarantee conditions Standard guarantee conditions We Moffat undertake that if within 12 months of the date of purchase this Moffat appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials we will at our option repair or replace the same FREE OF CHARGE for labour materials or carriage on condition that e The appliance has been correctly installed and used only on the electricity supply stated on the rating plate 24 SERVICESFORCE Customer Care Department For general enquiries concerning your Moffat appliance or for further information on Moffat products please contact our Customer Care Department by letter or telephone at the address below Customer Care Department Major Appliances Moffat Addington Way Luton Bedfordshire LU4 9QQ Tel 08705 950950 call
4. Observe the manufacturer s dosing and storage recommendations Observe the dosing Fill in the detergent in levels compartment A For programmes with prewash add an additional detergent dose in compartment B When using detergent tablets place detergent tablets in compartment A Unloading the dishwasher IMPORTANT Open the dishwasher s door leave it ajar and wait a few minutes before removing the dishes hot dishes are sensitive to knocks In this way they will be cooler and the drying will be improved Close the lid e Empty the lower basket first and then the upper one this will avoid water dripping from the upper basket onto the dishes in the lower one e Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes Moffac Cleaning and Care Cleaning the filters IMPORTANT NEVER use the dishwasher without filters Incorrect repositioning and fitting of the filters will produce poor washing results Az lt gt TA The dishwasher must Clean filters A BandC Turn the handle about Remove filter A from the be switched off thoroughly under 1 turn anticlockwise base of the washing running water and remove filters B compartment and C Put the flat filter A back Replace the filters and in the base of the lock by turning the washing compartment handl
5. the dishwasher If you use a drain hose extension the total length should not be longer than 4 metres Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided 21 CAUTION Always be sure that there is no water leakage from hoses and their connections after the installation Ensure that the hoses are not kinked crushed or entangled Electrical connection N WARNING Safety standards require the appliance to be earthed The manufacturer accepts no liability for failure to observe the above safety precautions Prior to using the appliance for the first time ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed The fuse rating is also to be found on the rating plate Always plug the mains plug into a correctly installed shockproof socket Z WARNING Multi way plugs connectors and extension cables must not be used This could constitute a fire hazard through overheating If necessary have the domestic wiring system socket replaced In case that the electrical cable has to be replaced contact your local Service Force centre The plug must be accessible after the appliance has been installed Never unplug the appliance by pulling on the cable Always pull the plug 22 Moffat Fitting under a counter IMPORTANT Carefully
6. 2 level 8 29 36 5 1 6 4 IV 2 level 7 23 28 4 0 5 0 IV 2 level 6 19 22 3 3 3 9 Ill 2 level 5 15 18 2 6 3 2 Ill 1 level 4 11 14 1 9 2 5 ll 1 level 3 4 10 0 7 1 8 I 11 1 level 2 lt 4 lt 0 7 1 level 1 no salt necessary 1 dH German degree measure of the water hardness 2 mmol l millimol per litre international unit for water hardness Setting the water softener manually see table The water softener is factory set at position 2 Set switch to position 1 or 2 Setting the water softener electronically see table The water softener is factory set at position 5 e5 65 M m ge ie D e N Ni OFF ee QUICK Z NORMAL Quick NA PROGRANME PROGRAMME D N The dishwasher must Press and hold Wait until programme The End light might be switched off Programme Cancel light 2 turns off flash 5 times for Switch on the button until programme programme light 1 goes example The flashing is dishwasher by pressing light 1 flashes and on flashing and repeated every 5 the On Off button programme light 2 simultaneously End seconds illuminates with fixed light starts flashing The light number of flashes of the End light corresponds to current level set ON OFF To change the level The End light indicates To memorise the press the the new setting operation switch off the Programme Cancel dishwasher by pressing button Each time the the On Off b
7. Cancel button and close the door The programme will continue from the point at which it was interrupted If the malfunction or fault code reappears contact the Service Force Centre For other combinations of fault codes not described in the above chart please contact your Service Force Centre IMPORTANT When carrying out the suggested corrective actions the appliance must be switched off 17 The wash results are not satisfactory e The wrong washing programme has been selected The dishes were arranged in such a way as to stop water reaching all parts of the surface The baskets must not be overloaded e The spray arm do not rotate freely due to wrong arrangement of the load e The filters in the base of the washing compartment are dirty or incorrectly positioned e Too little or no detergent has been used e Where there are limescale deposits on the dishes the salt container is empty or the wrong level of the water softener has been set e The drain hose connection is not correct e The salt container cap is not properly closed The dishes are not clean The dishes are wet and Rinse aid was not used dull e The rinse aid dispenser is empty There are streaks milky e Decrease rinse aid dosing spots or a bluish coating on glasses and dishes Water drops have dried e Increase rinse aid dosing onto glasses and dishes The detergent may be the cause Contact the detergent manufacturer s consumer care line
8. Moffac User Manual Dishwasher MDW 542 Content Safety information 3 Control panel and functions 4 Audible signals 6 Programme table 7 Before the first use 7 Setting the water softener 8 Filling with dishwasher salt 10 Filling with rinse aid 11 Adjusting the dosage of rinse aid 11 Loading cutlery and dishes 12 Filling with detergent 14 Unloading the dishwasher 14 Cleaning and care 15 Environmental concerns 16 Something not working 17 Technical data 19 Consumption values 19 Hints for Test Institutes 20 Installation 21 Service and Spare Parts 24 Guarantee conditions 24 Safety information Moffac In the interest of your safety and to ensure the correct use before installing and first using the appliance read this user manual carefully including its hints and warnings To avoid unnecessary mistakes and accidents it is important to ensure that all people using the appliance are thoroughly familiar w
9. ct e The guarantee is for the same period and to the same extent for labour and parts as exists in the new country of use for this brand or range of products e This guarantee relates to you and cannot be transferred to another user e Your new home is within the European Community EC or European free Trade Area Moffac The product is installed and used in accordance with our instructions and is only used domestically i e a normal household The product is installed taking into account regulations in your new country Before you move please contact your nearest Customer Care centre listed below to give them details of your new home They will then ensure that the local service Organisation is aware of your move and able to look after you and your appliances France Senlis 33 0 3 44 62 29 29 Germany Nurnberg 49 0 800 234 7378 Italy Pordenone 39 0 434 39 4700 Sweden Stockholm 46 0 8 672 53 90 UK Luton 44 0 8705 950 950 25 www electrolux com 152952 66 0 Subject to change without notice Moffat CE
10. e clockwise to the and ensure that it fits stop perfectly under the two guides D IMPORTANT NEVER try to remove the spray arms If residues of soil have clogged the holes in the upper spray arm remove them with a toothpick External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth If necessary use only neutral detergents Never use abrasive products scouring pads or solvent acetone trichloroethylene etc Ensure that the seals around the door the detergent and rinse aid dispensers are cleaned regularly with a damp cloth We recommend every 3 months to run a 65 C wash programme without dishes using detergent Prolonged periods of non operation If you are not using the machine for any period of time you are advised to 1 Unplug the appliance and then turn off the water 2 Leave the door ajar to prevent the formation of any unpleasant smells 3 Leave the inside of the machine clean Environmental concerns Packaging material The packaging materials are environmentally friendly and can be recycled The plastic components are identified by markings e g gt PE lt gt PS lt etc Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities Z WARNING When a unit is no longer being used Pull the plug out of the socket Cut off the cable and plug and dispose of them Dispose of the door ca
11. es after washing on the dishes or a bluish film on glassware or knife blades Ay Open the lid Set the dosage level Close the lid and press The dose is factory set until it locks in position 4 Loading cutlery and dishes The following items are not suitable for use in the dishwasher Cutlery with wooden horn china or mother of pearl handles Plastic items that are not heat resistant Older cutlery with glued parts that are not temperature resistant Bonded cutlery items or dishes Pewter or copper items Lead crystal glass Steel items prone to rusting Wooden platters Items made from synthetic fibres e When loading the dishwasher make sure that you Remove all left over food and debris Soften remnants of burnt food in pans Load hollow items such as cups glasses pans etc with the opening downwards so that water cannot collect in the container or a deep base Dishes and items of cutlery must not lie inside one another or cover each other To avoid damage to glasses they must not touch Lay small objects in the cutlery basket e Plastic items and pans with teflon have a tendency to retain water drops these items will not dry as well as porcelain and steel items IMPORTANT Before closing the door ensure that the spray arms can rotate freely Mi AN I bri N
12. fill up with rinse aid If the drying results are not satisfactory we recommend that you 1 Fill up the rinse aid dispenser with rinse aid When using tablets that integrate 2 Set the rinse aid dosage to position 2 rinse aid and detergent there is no need to fill up with rinse aid If you decide in future to use separated set the water softener detergents we advise that you add special dishwasher salt Fill up the salt and rinse aid container Adjust the water hardness setting to the highest level and perform 1 normal washing When using tablets that integrate programme without loading any dishes rinse aid detergent salt function Adjust the water hardness setting according nd other additives to the hardness of the water in your area Adjust the rinse aid dosage there is no need to fill up with special salt or rinse aid Setting the water softener The dishwasher is equipped with a water IMPORTANT softener designed to remove minerals and salts The water softener must be set in both ways detrimental or adverse effect on the operation of the appliance The softener should be adjusted according to the hardness of the water in your area Your local Water Authority can advise you on the hardness of the water in your area Water hardness Adjustment of the water hardness setting in dH in mmol l Range manually electronically 51 70 9 0 12 5 IV 2 level 10 43 50 7 6 8 9 IV 2 level 9 37 42 6 5 7 5 IV
13. follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel A WARNING The dishwasher must be secured against tilting Therefore make sure that the counter it is fixed under is suitably secured to a fixed structure adjacent kitchen units cabinets wall This dishwasher is designed to be fitted under a kitchen counter or work surface No further openings for the venting of the dishwasher are required but only to let the water fill and drain hose and power supply cable pass through The dishwasher incorporates adjustable feet to allow the adjustment of the height During all operations that involve accessibility to internal components the dishwasher has to be unplugged Be sure that once the appliance has been installed it is easily accessible for the service engineer in the event that a repair is required Levelling Good levelling is essential for correct closure and sealing of the door When the appliance is correctly levelled the door will not catch on either side of the cabinet If the door does not close correctly loosen or tighten the adjustable feet until the machine is perfectly level See enclosed template 23 Service and Spare Parts In the event of your appliance requiring service or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning 08705 929929 Your telephone call will be automatically routed
14. ith its operation and safety features Save these instructions and make sure that they remain with the appliance if it is moved or sold so that everyone using it through its life will be properly informed on appliance use and safety Correct use e This dishwasher is only intended for washing household utensils suitable for machine washing e Do not put any solvents in the dishwasher This could cause an explosion e Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket Only use products detergent salt and rinse aid suitable for dishwashers e Avoid opening the door whilst the appliance is in operation hot steam may escape e Do not take any dishes out of the dishwasher before the end of the dishwashing cycle e After use isolate the appliance from the power supply and turn off the water supply This product should be serviced only by an authorised service engineer and only genuine spare parts should be used General safety e Dishwasher detergents can cause chemical burns to eyes mouth and throat Could endanger life Comply with the safety instructions of the dishwasher detergent manufacturer e The water in your dishwasher is not for drinking Detergent residues may still be present in your machine e Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded In
15. ntegrated appliance the controls are located on the top of the door When selecting a washing programme the door needs to be slightly open On Off button End light 50 so E Programme Cancel button IMPORTANT Press On Off button a programme light is illuminated and End light is illuminated with Always remember that when performing fixed light last performed programme operations as still set selecting a washing programme In this case the programme has to be deactivation activation of the audible signals cancelled see instructions Cancel a setting the water softener washing programme in progress the appliance MUST be in setting mode Press On Off button no programme lights are illuminated and End light flashes appliance in setting mode Moffac a N e Starting the washing programme 1 Press the On Off button 2 Press the Programme Cancel once the light of the last performed washing programme illuminates and the End light flashes 3 Press the Programme Cancel as many times as necessary to illuminate the light corresponding to the desired programme 4 Close the dishwasher s door the programme will start automatically Programme Cancel button lt r End light S IMPORTANT Once the programme has started if you want to change the selection made you must cancel the washing programme in progress e Cancel the washing programme in progress 1 Open
16. programme see Consumption aid dispenser have been filled with salt and values rinse aid respectively and using the test programme see Consumption values Full load 12 standard place settings Amount of detergent required 5 g 25 g Type B Rinse aid setting position 4 Type III pine mi Upper basket Lower basket Cutlery basket 20 Installation ZN WARNING Any electrical and or plumbing work required to install this appliance should be carried out by a qualified electrician and or plumber or competent person Water connection Z WARNING The dishwasher must not be connected to open water appliances or instantaneous water heaters This dishwasher must be fed with cold water Z CAUTION Moff N WARNING Only use for connection to the water mains new hose set old hose set must not be reused If the machine is connected to new pipes or pipes which have not been used for a long time you should run the water for a few minutes before connecting the inlet hose Inlet hose Connect the inlet hose to a water tap with an external thread of 3 4 The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut The locknut must be correctly fitted to avoid water leaks Drain hose Connect drain hose to the sink Secure it with the supplied hose clamp Required height 30 to 100 cm above bottom of
17. ramme light 2 illuminates with fixed starts flashing light The illumination of the End light means that the audible signals are active _ PROGRAMME ON OFF 6 To memorise the operation switch off 5 To deactivate the audible signals press the Programme the dishwasher by Cancel button the pressing the On Off End light turns off button indicating that the audible signals have been deactivated Fi _ PROGRAMME 7 To reactivate again the audible signals follow the instructions till point 4 Wait a few seconds and then press the Programme Cancel button the End light illuminates indicating that the audible signals have been reactivated Moffat Programme table 65 Normal soil Prewash Main wash Normal Crockery cutlery pots and pans 2 intermediate rinses Final rinse Dry 65 Light soil Main wash Final rinse Quick Crockery and cutlery 50 Normal soil Prewash Main wash Bio Crockery and cutlery 1 intermediate rinse Final rinse Dry Any Prewash Rinse and Hold Partial load to be completed later in the day This programme does not require the use of detergent Before the first use When using separately special nee ee alae suitable or your water hardness Follow the dishwasher salt rinse aid and manufacturers instructions detergent Set the water hardness to level 1 set the water softener add special dishwasher salt IMPORTANT
18. s which can be solved with the help of the indications described in the chart without calling out an engineer Open the door and carry out the following suggested corrective actions Fault code malfunction The dishwasher does not fill with water continuous flashing of the start cancel indicator light 1 intermittent audible signal 1 flash of the end of programme indicator light The dishwasher will not drain continuous flashing of the start cancel indicator light 2 intermittent audible signals 2 flashes of the end of programme indicator light The programme does not start The water tap is blocked or furred with limescale The water tap is turned off The filter where present in the threaded hose fitting at the water inlet valve is blocked The water inlet hose has not been correctly laid or it is bent or squashed The sink spigot is blocked The water drain hose has not been correctly laid or it is bent or squashed The dishwasher door has not been properly closed The main plug is not plugged in The fuse has blown in the household fuse box Moff Clean the water tap Turn the water tap on Clean the filter in the threaded hose fitting Check the water inlet hose connection Clean out the sink spigot Check the water drain hose connection Close the door Insert the mains plug Replace the fuse Once these checks have been carried out press the Programme
19. s to this number may be recorded for training purposes The appliance has been used for normal domestic purposes only and in accordance with the manufacturer s instructions The appliance has not been serviced maintained repaired taken apart or tampered with by any person not authorised by us All service work under this guarantee must be undertaken by a Moffat Service Centre Any appliance or defective part replaced shall become the Company s property e This guarantee is in addition to your statutory and other legal rights Home visits are made between 8 30am and 5 30pm Monday to Friday Visits may be available outside these hours in which case a premium will be charged Exclusions This guarantee does not cover e Damage or calls resulting from transportation improper use or neglect the replacement of any light bulbs or removable parts of glass or plastic e Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom e Appliances found to be in use within a commercial environment plus those which are subject to rental agreements e Products of Moffat manufacture which are not marketed by Moffat European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications e The guarantee starts from the date you first purchased your produ
20. tch This prevents children from trapping themselves inside and endangering their lives 16 Frost precautions Avoid placing the machine in a location where the temperature is below 0 C If this is unavoidable empty the machine close the appliance door disconnect the water inlet pipe and empty it Moving the machine If you have to move the machine moving house etc 1 Unplug it 2 Turn the water tap off 3 Remove the water inlet and discharge hoses 4 Pull the machine out together with the hoses 5 Only transport the dishwasher in an upright position otherwise salt water may run out Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product Something not working IMPORTANT The dishwasher will not start or stops during operation Certain problems are due to the lack of simple maintenance or oversight
21. the door 2 Press and hold the Programme Cancel button until the light of the running programme turns off and the End light is flashing 3 Release the Programme Cancel button 4 Switch off the machine by pressing the On Off button or select a new washing programme check that there is detergent in the detergent Iluminates when the washing programme has ended visible with opened dispenser door Switch off the dishwasher by pressing the On Off button It also has added functions of visual signalling as the setting of the water softener deactivation activation of the audible signals intervention of an alarm due to the malfunction of the machine a Ei Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing end of the washing programme malfunction of the appliance Factory setting audible signals activated Deactivation activation of the audible signals ON OFF ol sles NORMAL QUICK CANCEL 1 The dishwasher must 2 Press and hold be switched off Programme Cancel Switch on the button until dishwasher by programme light 1 pressing the On Off flashes and button programme light 2 illuminates with fixed light 3 Press 4 After a few seconds programme light 1 turns off programme light 2 goes on Programme Cancel button again programme light 1 becomes fixed and flashing and End light prog
22. this way you will avoid anybody tripping over the open door and hurting themselves e Do not sit or stand on the open door Child safety This appliance is designed to be operated by adults Don t allow children to use the dishwasher unsupervised e Keep all packaging well away from children There is risk of suffocation Keep all detergents in a safe place out of children s reach Keep children well away from the dishwasher when the door is open Installation Check your dishwasher for any transport damage Never connect a damaged machine If your dishwasher is damaged contact your supplier e All packaging must be removed before use e Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person e For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way Never use the dishwasher if the electrical supply cable and water hoses are damaged or if the control panel work top or plinth area are damaged such that the inside of the appliance is freely accessible Contact your local Service Force centre in order to avoid hazard e All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components Z WARNING For electrical and water connection carefully follow the instructions given in specific paragraphs Control panel and functions In this fully i
23. utton button is pressed the level increases Level 1 follows level 10 Filling with dishwasher salt Z CAUTION Use only special salt suitable for dishwashers Unscrew the cap Only before filling with Using the funnel salt for the first time provided pour in the fill the salt container salt until the container is with water full IMPORTANT Immediately start a complete programme Remove any trace of Replace the cap tightly salt turning it clockwise until it stops with a click IMPORTANT The salt container will require topping up periodically The salt cap has a refill indicator window in the centre in which a green float is clearly visible when there is salt inside the container and almost disappears when the salt has finished 10 Filling with rinse aid Open the lid Fill up with rinse aid Clean up any rinse aid The maximum level for which overflows Close filling is indicated by the lid and press until it max locks Z CAUTION Never fill the rinse aid dispenser with any other substances e g dishwasher cleaning agent liquid detergent This would damage the appliance Top up the rinse aid when the indicator B becomes clear Adjusting the dosage of rinse aid Increase the dose if there are drops of water or Reduce the dose if there are whitish streaks lime spots on the dish
Download Pdf Manuals
Related Search