Miele PW 6065 Plus Washer User Manual
Contents
1. C Celsius factory default or E Fahrenheit The delivery status is C 61 Menu Settings Supervisor level The menu Settings Supervisor level must be activated by the Technical Service The menu Settings except Languages is locked with a code to prevent unwanted access Selecting Settings Settings Back Language P Supervisor level m Select Supervisor level and confirm Settings Back Supervisor level Access via code m Select Access via code and confirm Entering the code Enter the code 0 0 0 factory default If the code is entered wrong three times the code entry will be locked for 1 hour Enter code m Turn the jog shuttle until the first digit shows Confirm the digit Enter the second and third digit 62 Menu Settings Supervisor level Confirming the code 000 Contirming the code Entry OF Menu opened The user is now in the Supervisor level The previously described and all the following settings can be changed Change the code to prevent unauthorized access to the settings 63 Menu Settings Supervisor level Language The display contents can be shown in different languages The fixed default language can be set in the sub menu Languages P m Select the desired language and confirm with OK Sort languages The language order can be set when the option Language access international is selected Supervisor2. PROFESSIONAL Operating manual Washer PW 6065 Plus To prevent accidents and machine damage re e instructions before installation or use M Nr 06 523 700 Contents IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the WasSher o o oo ooo 7 So o 42 4 ei RITTER he bo ee ELI 7 Description of the machine aaea l Before using for the first time 10 Using the washer ce eens 11 1 art att pi Pte 15 Ojeli eli lt cueca einstein nie 18 Delay A dita 20 Spin 21 Spin speed 21 Program guide ees 22 Program sequence ee 21 To change a program o 29 FOC cla Ego 00 1 saprai Spiders 29 ie ChanGe a Proa cvosatanasa era Dad Seep a ee 29 Adding removing laundry during a wash program 29 a 30 Cleaning and Care o o 32 Cleaning the washer o 32 Cleaning the inlet hose filter 33 Frequently asked questions 2 0 0 0 ccc ee 34 A wash program cannot be started 34 General problems with the washer o 35 Opening the door during a power failure or when the drain is blocked 38 Changing the light bulb anaana aaea 41 After sales service 42 Contents Installation instructions 43 installation sie un rete Bae hd oe eae eb eed oe eee ee eke ee eee 44 IASIGIGUOM on a OCC sect p od oh et A 46 INStANGHON SUG2 4 Leesi rees iia aio aes EI 47 Removing the shipping struts sirio ei 4
3. 1 Remove the siphon tube from the compartment amp and rinse under warm water Clean the pipe on which the siphon tube is attached 2 Replace the siphon tube Cleaning and Care Cleaning the inlet hose filter Slowly turn on the faucet and check for leaks If water leaks tighten the bolt The washer has two water inlet filters to protect each inlet valve Check and clean these filters every 6 months This ee MA 00300 IE neque Cleaning the filter in the inlet valve with some water supplies m Using pliers carefully loosen and Cleaning the inlet hose filters remove the plastic hose connector inl Ive m Turn off the water faucet TOES SY eae m Unscrew the inlet hose from the valve by turning the connector counterclockwise using a wrench if necessary m Using needle nose pliers remove the plastic filter by pulling on the bar see illustration Rinse under running water and return Replace the filter and seal then reconnect the hose m Remove the rubber seal 1 from the connector Both filters must be put back in lace after cleaning m Using needle nose pliers grasp the z J plastic filter 2 and pull it out of the hose connector m Clean the filter under running water and carefully remove any large particles m Replace the filter and seal and reconnect the hose 33 Frequently asked questions N Repairs to electrical appliances must only be carried out by a qualified and trained person in acc
4. This appliance is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft However under certain conditions it may be possible for installation in these applications Please contact the Miele Technical Service Department with specific requirements Do not install this machine in rooms where temperatures below freezing may occur Frozen hoses may burst under pressure The reliability of the electronic control unit may be impaired at temperatures below freezing Before using the machine for the first time check that the shipping struts at the rear of the machine have been removed see Installation During spinning if the shipping struts are still in place damage may result to both the machine and adjacent furniture or appliances Turn off the water supply if the machine is to be left for any length of time e g vacation especially if there is no floor drain gully in the immediate area Overflow hazard Check that the drain can accommodate the water flow before operating the washer Make certain the drain hose is secured in the drain Otherwise the force of the expelled water could cause the drain hose to come out of the drain Be sure that foreign objects e g nails pins coins paper clips do not find their way into the machine These items may damage the machine which may also cause damage to the laundry IMPORTANT SAFETY INSTRUCTIONS If the corre
5. recommended on the packaging m Select the Extra Starch before starting a program The program and the remaining time will stop The display shows Starch m Dispense the starch directly in the drum m Select a spin speed and confirm or press the Start button Dye removers Fabric dyes Do not use dye removers in this washer m When dying fabrics in the washer adhere to the manufacturer s instructions External dispensing The washer is set up for connection to an external detergent dosage system A conversion kit is necessary which can be purchased from Miele 31 Cleaning and Care Before cleaning the appliance disconnect the power supply by unplugging the unit or manually tripping the circuit breaker N Do not use chemical solvents abrasive cleaners glass or all purpose cleaners These can damage plastic surfaces and other parts Cleaning the washer m Clean the exterior of the washer with a mild solution of non abrasive detergent or soap and water Wipe dry with a soft cloth m Clean the drum with a stainless steel cleaner specially formulated for use in a washing machine Cleaning the detergent drawer Detergent residue should be cleaned out regularly 32 m Pull out the detergent drawer as far as it will go Press down on the red release lever and pull the drawer out of the machine m Clean the detergent drawer with warm water m Clean the siphon tube
6. Control panel 1 Display See the following pages for more information 2 Direct select buttons To select a wash program directly You can also save a Favorite wash program on these buttons Start button 4 Optical interface PC Allows a service technician to check and update the wash programs Jog shuttle Turn to select menus Press to confirm the selection 6 o Door button to open the drum door Description of the machine The washer is suitable for use in laundromats or community laundromats for large amounts of laundry Guide to the washer Display function Main menu 1 Cottons Uni 60 C 2 Wrinkle free 40 C Settings P 3 Delicate 40 C 4 Woollens 4 304 12 00 The display shows the main menu with factory default settings Program selection is highlighted If the display is dark in Stand by mode turn the jog shuttle Jog shuttle Turn the jog shuttle to select a program or setting Press the jog shuttle to confirm the selection Direct select buttons The first four programs shown in the display on the left are the Favorites They can be selected with the direct select buttons The Favorites can be individually set to your desire See Favorites for more information The direct select buttons have different functions in the other menus In these menus an arrow is displayed above the respective button with the function description of the button Program selection
7. Do not remove these filters except for cleaning Maintenance Replace the water hoses only with genuine Miele hoses Extension hoses Extension hoses 8 2 or 13 2 5 m or 4 m may be obtained from Miele al Installation Hot water connection Connecting the machine to a hot water ring line will lead to low electrical consumption during hot water operation The hot water temperature at the water faucet must not exceed 158 F OO The water in single water lines from the hot water source cools faster when not in constant use lo heat the wash water more electricity must be used The same conditions for the hot water as for the cold water connection will then apply m Connect the hot water intake hose red mark to the water faucet The connection of the machine to a hot water line only is not possible for functional reasons de If the washer is not to be installed for Not water connection the settings Main wash Pre wash and Rinse must be adjusted respectively The hot water intake hose must be removed m Select in Settings Operator level the respective options cold The program times may be extended m Unscrew the hot water intake hose red mark Screw on the supplied stopper Installation Drainage If necessary the drain hose can be extended up to 16 5 5 m The hose Drain valve extension can be purchased from your The machine is drained with a sd motorized dr
8. Start time The program end can be selected in 30 minute steps Cottons Uni 1400 rpm Start time Finish m Select the desired program end time with the jog shuttle and confirm The program end time is adjusted to the next full or half hour The program start will be delayed according to the desired program end time Starting the Delay Start m Press the Start button The elapsed delay start time is displayed and will count down in minutes Canceling the Delay Start m The Delay Start can be canceled with the direct select button 4 After the program start the actual load size is measured This can result in an earlier program end 20 Spin speed Program rpm Cottons Hygiene 1400 Cottons Uni 1400 Minimum iron 1000 Delicates 600 Sturdy 1200 Woollens 1200 Silk 400 Shirts 600 Denim 900 Disinfection programs 1400 Kitchen linen 1400 Table linen 1200 Curtains 400 Pillows 1400 Outerwear 900 Proofing 800 Towelling 1400 sluice 1400 spin 1400 Programs can be added from the Settings supervisors level when activated by the Technical Service The final spin speed can be reduced The speeds above are the highest available Spin Rinse spin The laundry is spun after the main wash and between the rinse cycles Reducing the final spin speed will also reduce the rinse spin speeds Without final spin m Select Rinse Stop from th
9. a wash temperature of 86 F 30 C or higher The machine comes factory set with the water type hot Main wash water The water type for the main wash can be selected except for the programs Woollens Silk and Curtains The hot water intake will be only accessible at a wash temperature of 30 C or higher The machine comes factory set with the water type hot If the washer is not connected to hot water the program running times will be extended and vary from the displayed remaining times If Industrial water is used the washer must be refitted accordingly Rinse water The water type for the rinse in the programs Cottons Hygiene Cottons Uni Minimum iron Table linen Kitchen linen Towelling and Sluice can be selected The hot water intake will be only accessible at a wash temperature of 50 C or higher The machine comes factory set with the water type hot If Industrial water is used the washer must be refitted accordingly 65 Menu Settings Supervisor level Water level Cottons The program Cottons Hygiene and Cottons Uni allows you to increase the water level for the main wash The machine comes factory set with the option block parameter selected The water level will be controlled according to the factory set program data Water level Min iron The program Minimum iron allows to increase the water level for the main wash The m
10. and soil resistant Tip The item should be washed and rinsed or dried To get an optimum result dry the items in a clothes dryer or iron them Water Only use water repellent with the hint Suitable for membrane repellent textiles They are based on fluorochemicals Do not use agents containing paraffin Place the liquid detergent insert in compartment UY an fill with water repellent Load size 3 5 kg 23 Program guide Disinfection programs Items Bed linen made of cottons or mixed fabrics Note For different requirements with a temperature selection of 85 C thermal to 40 C chemothermal with the respective holding times Detergent Use a detergent for disinfection and chemothermal disinfection Regard the temperature level recommended on the packaging Load size 6 5 kg Hygiene If a temperature lower than 55 C was selected for the last wash program or if the program Spin was selected Hygiene is displayed Or When selecting a Hygiene program do not put any laundry into the drum add a small amount of detergent in compartment LY and start the program select a wash program with a temperature of 60 C or higher If the Hygiene display is disregarded each program will run accordingly Sluice 75 C or Sluice 65 C ltems Heavily soiled items of cottons linen or mixed fabrics Note To remove heavy soiling the laundry will be pre rins
11. another electrical connection please read the converting manual on the wiring diagram inside of the washer The conversion must be performed by a Miele Service Technician Additionally the Heating level setting must be adjusted N Do not install devices to automatically turn the washer off i e a clock timer 94 Technical Data Height Width Depth Depth with the door open Weight Maximum floor load Capacity Fuse rating Rated load Fuse rating Noise level during spinning Noise emission 3 GSGV Minimum water flow pressure Maximum water pressure Length of intake hose Length of power cord Drain height maximum Drain pump Light bulb for drum light Cale 99 0 CM 2 cm 112 cm 109 kg 2 78 Newton approx 278 kg 6 5 kg dry laundry see data plate see data plate see data plate lt 70 dB A 14 5 psi 1 bar 145 psi 10 bar 1 6 m ke mM 1m Type G4 5 Watts 12 Volt SI Help to protect the environment Disposal of the packing materials The cardboard box and packing materials protect the appliance during shipping To prevent suffocation of children ensure that any plastic wrapping bags etc are disposed of safely and kept out of the reach of children Please recycle 56 Disposal of an old appliance Old appliances may contain materials that can be recycled Please contact your local recycling authority about the possibility of recycling these materials En
12. level The access code for the operator level can be changed m Enter the old code m Enter the new code Once the new code is confirmed the display will show the beginning of the Settings menu 64 Language menu This option allows you to display an additional welcome screen which requests a language selection The screen can be shown before the main menu or after the end of a wash program Two options can be selected International Welcome screen shows an additional language has to be selected National no additional welcome screen factory default Intensive Water plus You can select this option if the Extras Intensive and Water plus are shown in the menu Extras The option is factory set off Save The option Save can be shown in the main menu The function Save is needed to save for example the favorite wash programs on the direct select buttons The machine comes factory set with this option turned off Menu Settings Supervisor level Auto load control The washer has a Auto load control The water levels and the program running times are adjusted to the load size If the load size automatic is turned off the program will always run as if for a full load The machine comes factory set with this option turned on Pre wash water The water type for the pre wash can be selected except for the program Curtains The hot water intake will be only accessible at
13. machine ensure that the connection data on the data plate fusing voltage and frequency match the mains electrical supply If in doubt contact an electrician The appliance must be grounded It is IMperative that this basic safety requirement be met Do not connect the appliance to the mains electrical supply with an extension cord Extension cords do not guarantee the required safety of the appliance e g danger of overheating The machine is built in accordance with current safety requirements Incorrectly repaired machines may pose a considerable risk to the user which is not covered by the manufacturer Repairs should only be performed by a Miele approved technician Ensure power is not supplied to the appliance while maintenance or repair work is being performed The machine is only completely isolated from the electrical supply when it is turned off at the main switch and the plug is pulled or by tripping the circuit breaker IMPORTANT SAFETY INSTRUCTIONS Connect the washer to the water mains Do not use old hoses Check the intake hoses regularly for damage They should be replaced regularly to prevent water damage Faulty components must only be replaced with genuine Miele spare parts Only when these parts are fitted can the safety standards of the machine be guaranteed If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord Use
14. plus In the setting Water plus you can select an extra setting from below Water plus The water level increases more water in the wash and rinse cycles of the program delivery status Additional rinse An extra rinse cycle is added in the programs Cottons Hygiene Cottons Uni and Minimum iron Water and Add rinse The water level is increased in the wash and rinse cycles and an extra rinse cycle is added to the programs Cottons Hygiene Cottons Uni and Minimum iron Settings Suds cooling Cold water is added at the end of the main wash to cool the wash water Suds cooling is carried out when a wash temperature of 70 C or more is selected Suds cooling should be activated when the drain hose is hung into a sink to prevent scalding Suds cooling is factory set turned on 59 Settings Time of day The selection allows the clock to be shown as 24 hours 12 hours or not at all The time of day is also set here If the clock is not selected the delay start can only be shown only as a 24 hour clock timer The display will how the timer counting down until the start of the program but not he current time of day Selecting the clock m Select the clock display and confirm The display changes to the time of day setting Set the time of day m Select the current hour with the jog shuttle and confirm Repeat with setting the minutes and confirm Press again to s
15. possibility Possibility 1 Select and confirm the menu Program selection in the display with the jog shuttle Possibility 2 Press one of the direct select buttons and access directly the basic menu of the program Guide to the washer Menu Program selection Program back selection Cottons Hygiene Cottons Uni Wrinkle free All pre set programs can be selected with the jog shuttle Depending on the direction the jog shuttle is turned the highlighter moves up or down The arrows WA at the right side of the display show that more selections are available Press the jog shuttle to open the basic menu of the selected wash program Basic menu of a wash program Settings Cottons BOA 1400 rpm Duration 0 45 h Extras Delay Start Di y v The program components program temperature and spin speed can be selected by turning the jog shuttle The selected component is highlighted Press the jog shuttle to select the component The respective submenu is displayed The submenu Extras and Delay Start can be selected by the direct select buttons To go back to the main menu press back All components can also be selected and confirmed with the jog shuttle only The Settings menu allows you to adjust the washer to individual needs See Settings for more information Before using for the first time The appliance must be correctly installed and connected before the first use Please see the I
16. to open the door m Add or remove the piece of laundry m Close the drum door The program will continue automatically To change a program Note Once the program has started the washer cannot make adjustments of the load size After adding or removing laundry the washer will default to the water and electrical consumption of a full load The time remaining will automatically be adjusted The drum door cannot be opened if the water temperature is greater than PG the water level is too high the program has reached the Final Spin When operated with a coin mechanism the machine will be locked after 3 minutes Canceling or changing a program and opening the door is no longer possible 20 Detergent Only use laundry detergent formulated for front loading washing machines For wool and wool blend fabrics use a detergent formulated for wools Follow instructions on the detergent packaging for the correct use and amount of detergent The amount of detergent used depends on the level of soiling Light soiling No solling or stains are visible Normal soiling some visible soiling or a few light stains Heavy soiling Very visible soiling or stains The size of the load and the water hardness level in your area have an impact on the amount of detergent necessary to obtain optimum wash results If you do not know the water hardness level in your area contact your local water author
17. to the lint trap pull it down The door will now open m Check that the impeller in the back of the chamber rotates freely by spinning it with your hand m Return the lint trap lid and tighten into place 39 Frequently asked questions Machines with a drain valve Open the drum door N Always make sure the drum is stationary before reaching into the drum to remove laundry moving drum is extremely dangerous m Press the lever for the emergency drain down and hold until you hear no more water running out m Insert a screwdriver into the notch next to the lever pull it down The door will now open 40 Frequently asked questions Changing the light bulb A burnt out light bulb will not affect the performance of the washer m Disconnect the power supply to the work area by unplugging the unit tripping the circuit breaker or removing the fuse m Open the detergent dispenser 1 2 drawer Remove the tool from the rear side of the panel m Press together the hooks of the plastic fitting 2 to separate it from m Open the drum door the bulb 1 m Replace the bad light bulb with a new one A replacement bulb can be obtained by contacting Miele The light bulb must not exceed the maximum wattage listed on the data plate m Insert the light bulb into the plastic fitting m Insert the drum lighting in the socket and turn clockwise m Insert the tool into the slit of the light To use the w
18. 7 Slang THe SHID DING SUIS pii h ieri 49 Leveling the washer eee eee eens 50 Water CONNGCHON s ce m5 ds a pr peu RI lips i 51 PIO eee ETRE 53 FICCIICE CONNECHON s ts cca to feta lg Pilla a ei de Rei i 54 Technical Data ne een 95 Help to protect the environment 56 Settings Pt 58 Language Pi 59 WAG iano EARLE int A 59 Ue 3 phepd dA bielle denied 59 Time of day oana naaa aaea a 60 Lies E aba eon 6b ond one dole eae E E E EE 60 PONO ersa pone anre TIE ease a 60 E eerren a E EE TAI G1 MICO AA 61 TMPTA Unit erat en oe a he ay de Cate ee Dees eR a 61 Menu Settings Supervisor level 62 IMPORTANT SAFETY INSTRUCTIONS Read the operating instructions before using this machine for the first time They contain important information about the safety use and maintenance of the machine Doing so will prevent injury and damage to the dryer Save these instructions and pass them on to any future user WARNING To reduce the risk of fire electric shock or injury Use Only use the washing machine to wash items which are specified by the manufacturer to be machine washable on the fabric care label Any other applications may be dangerous The manufacturer cannot be held responsible for damage caused by improper use of the appliance Technical Safety Check the packaging the washer and accessories for any signs of damage Do not use a damaged appliance Before connecting the
19. C to 60 C Items Kitchen linen made from cottons and linen i e chef jackets and pants towels rags Tip Use the Pre wash program for tough stains Use a pre wash detergent with enzymes Detergent Universal detergent Load size 3 5 kg Table linen 60 C to 30 C ltems Table cloths and napkins made of cottons linen or mixed fabrics Tip Use the Pre wash program for tough stains Use a pre wash detergent with enzymes Detergent Universal detergent Load size 6 5 kg Curtains 104 C to cold Items Curtains which are machine washable according to the manufacturer To rinse dust a pre wash without detergent is automatically added to the program Tip Curtains that wrinkle easily should be washed at a reduced spin speed or without a spin Detergent Curtain universal and color detergent in powder form Load size 3 0kg Pillows 95 C to 40 C Items Washable pillows with a filling of feathers down or synthetics Tip Regard the fabric care label Detergent Liquid detergent Load size 1 queen and 2 twin size pillows 24 Program guide Outerwear 40 C to cold Items Outdoor clothing made from micro fibers Tip Close all zippers Do not use fabric softener Detergent Detergent for delicates Load size 3 5 kg Proofing 104 F to 86 F ltems To treat micro fiber ski clothing fine dense cotton popelin or table cloths to make them water repellent
20. Cottons The programs Cottons Hygiene and Cottons Uni allow you to change the number of rinse cycles 2 rinses factory default 3 rinses 4 rinses 5 rinses No rinses min iron The program Minimum iron allows you to change the number of rinses 2 rinses factory default 3 rinses 4 rinses 68 Pre rinse Cottons The programs Cottons Hygiene and Cottons Uni allows you to add a pre rinse of the laundry The machine comes factory set with this option off Pre rinse Min iron The program Minimum iron allows a pre rinse of the laundry The machine comes factory set with this option off Spin free of charge When operated by a coin mechanism the program Spin can be activated free of charge The machine comes factory set with this option off Menu Settings Supervisor level No detergent Leaving the Settings menu m Press back and confirm The If an external dispensing system is display shows the main menu fitted to the machine it will not be accessed if No soap is selected You have the option to show the Extra No Soap in the menu Extras The machine comes factory set with this option off External dispenser The washer is set up for connection to an external dispensing system To use the external dispensing system the setting must be adjusted set accordingly The machine comes factory set with this option off 69 70 71 Miele Limited Nati
21. Start button The Start button lights The display shows the approximate program run time It will count down in minutes The first 10 minutes the washer calculates the water absorbency of the laundry The overall program time may be shortened or lengthened Additionally the sequence cycle Is displayed The washer shows the Current program step The drum light turns off after the program starts Press one of the following direct select buttons during the running program Button Extras the displayed Extras can be selected or deselected after the program start Button Delay Start the time of day and the approximate program end is displayed Button Cancellation to cancel the currently running program The wash water will be drained away 14 6 At the end of a program The anti crease program starts when the laundry is not immediately removed from the washer after the program end Anti crease and End will flash alternately in the display m Use the o Door button to open the drum door m Remove the laundry Check the drum for any missed pieces of laundry Items inadvertently left in the washer may be damaged e g shrink or discolor during the next wash cycle m Check the folds of the door seal for any small articles which may have been trapped m Close the drum door Otherwise foreign objects may find their way into the drum These could be inadvertently washed and cau
22. a stain remover or a paste made from powder detergent and warm water Dab stains with a damp light colored cloth Do not rub Do not use chemical solvents in the machine m Sort the laundry Using the washer General tips Dark fabrics often bleed the first few times they are washed They should be washed separately several times before being included in a mixed load Remove any lead weights or strips from curtains before washing Loose underwires should be removed or sewn in place before washing Woolens and knitted garments should be turned inside out Close zippers and hooks and eyes before washing Comforter covers and pillowcases should be fastened in order to prevent small items from rolling inside of them Do not machine wash items if it is not recommended on the fabric care label Using the washer 2 Load the washer m Open the drum door using the o button The drum light lights m Load the laundry loosely into the drum For best results wash mixed loads of small and large items This will improve washing effectiveness and help distribute the load evenly For the lowest energy and water consumption load the washer to its max capacity See Program guide Note Overloading the washer will affect wash results and cause wrinkling m Close the drum door Close the drum door To prevent damage to the door seal and clothing make sure that there are no clothes caught between th
23. achine comes factory set with the option block parameter selected The water level will be controlled according to the factory set program data Pre wash temp Cot The Pre wash temperature for the programs Cottons Hygiene and Cottons Uni can be selected The machine comes factory set with the option block parameter selected The water level will be controlled according to the factory set program data 66 Pre wash duration The wash time for the pre wash can be extended The machine comes factory set with the option block parameter selected The water level will be controlled according to the factory set program data Wash time Cottons The programs Cottons Hygiene and Cottons Uni allow to increase the water level for the main wash The machine comes factory set with the option block parameter selected The water level will be controlled according to the factory set program data Min iron The program Minimum iron allows to extend the wash time for the main wash The machine comes factory set with the option block parameter selected The water level will be controlled according to the factory set program data Menu Settings Supervisor level No of programs Additional programs can be added to the program selection O Additional programs factory default 4 Additional programs Table linen Pillows linen Curtains and Kitchen 2 Additional programs Outerwe
24. ain valve A connection The drain pump must be replaced for can be made to an on site floor drain drain heights over 3 ft 1 m The gully with an air gap on an angle maximum allowable drain height is 5 ft 11 in 1 8 m A stronger pump for Drain pump these heights can be purchased from The wash water is drained using a Aurea ere EME pump with a 3 ft 1 m delivery height Make sure there are no kinks in the drain hose The elbow on the end of the drain hose can be turned or removed if necessary Possible connections 1 Directly into a sink Hook the hose over the edge of the sink and secure it firmly e g by tying the hose to the water faucet 2 To a stand pipe Place the drain hose into a 1 4 cm stand pipe and secure it firmly 3 To a floor drain The machine is equipped with an air gap anti siphoning system so that no minimum drain height is required 53 Installation Electrical connection N This installation should be performed by an experienced and qualified technician in accordance with local codes and regulations The washer comes with a power cord without a plug The machine is supplied as standard for connection to a 208 V 60 Hz 20 A 3 phase electrical supply For extra safety it is advisable to install a residual current device RCD with a trip current of 30 MA The machine must only be connected to the voltage and frequency shown on the data plate NTO convert the machine to
25. ar and Waterproofing 6 Additional programs all of the above Hygiene If the last used program had a temperature of 55 C or less the display shows the request to start the Hygiene program The machine comes factory set with this option turned off Sluice When the option is selected the sluice programs are offered additionally The machine comes factory set with this option turned off Disinfection Special disinfection programs can be added O Additional programs factory default 4 additional programs Thermal disinfection 15 min 85 C Chemo thermal disinfection 10 min 70 C Chemothermal disinfection 20 min 60 C and Chemothermal disinfection 30 min 40 C Pre wash In the programs Cottons Hygiene Cottons Uni and Minimum iron you can select to permanently add a pre wash to the cycle or to select it in the menu Extras The machine comes factory set with the option Menu selection activated 2 Pre wash Kitchen linen The program Kitchen linen allows an additional pre wash Add the detergent for the additional pre wash directly in the drum The machine comes factory set with this option turned off 67 Menu Settings Supervisor level Optimize energy The energy use for the programs Cottons Hygiene Cottons Uni and Minimum iron is at its optimum when this option is turned on The machine comes factory set with this option on No rinses
26. asher it is absolutely bulb turn counterclockwise until necessary to have the light bulb resistance is felt properly installed m Pull out the drum lighting 41 After sales service Repairs In the event of a fault which you cannot fix yourself please contact the Miele Technical Service Department 1 800 565 6435 service miele ca When contacting the Technical Service Department please quote the model and serial number of your appliance Both can be found on the data plate visible above the front glass on the inside of the door 42 PC Update The indicator marked PC allows a technician to make use of new technology if new programs are developed or new fabrics are introduced Optional accessories Optional accessories are available at your Miele dealer or Miele Installation Instructions Installation Front view 1 Water intake hose cold 2 Water intake hose hot 3 Electrical connection Control panel 5 Detergent dispenser drawer 6 Drum door 44 Access panel to drain filter drain pump and emergency door release Height adjustable feet 9 Stand Retaining clips for concrete stand 1 Recessed grip Rear view An T itt 7 ai 1 5 re J 3 AS E stai a gt il A Al T a i B XX A 7 DI Q Lid with transport grips 2 Mounting fo
27. ave the time of day 60 Contrast The contrast of the display can be set in ten different levels The machine is factory set to level 4 The contrast changes immediately when a different level is selected m Confirm the setting with the jog shuttle Brightness The brightness of the display can be set in ten different levels The machine is factory set to level 5 The brightness changes immediately when a different level is selected m Confirm the setting with the jog shuttle Standby The display goes out after 10 minutes and the Start button flashes slowly to save energy On The display will go into Standby mode if no program was selected after the machine was turned on after a program has started atthe endofa program Not in current prog Factory default The Standby function will be turned on if no program was selected after the machine was turned on By turning the jog shuttle or pressing any button the display is turned on again Settings Memory The Memory function remembers the addition of an extra feature to a program a change in spin speed or the temperature the next time that program is selected Once the wash program is selected again the washer shows the saved options The memory function is not active when favorites are selected with the direct select buttons The Memory function is factory set off Temperature unit The temperature can be shown in
28. ct amount of detergent is dispensed the machine should not need to be descaled If the washer needs to be descaled use a descaling agent with corrosion protection These special descaling agents can be purchased from the Miele Service department Use as directed Never use solvent based cleaning agents in this machine this may result in damage and create toxic fumes Fire and explosion hazard ltems which have been pre treated in solvent based cleaning agents must be thoroughly rinsed in clean water before being washed in the machine Only use dyes specified by the manufacturer as being suitable for use in a washing machine Use as directed by the manufacturer Dye removers may contain sulphur compounds which cause damage such as corrosion Do not use dye removers in this machine The drum door glass will be hot when washing at very high temperatures Do not touch the glass Danger of burns The stainless steel casing must not come in contact with liquid cleaning or disinfection agents containing chlorine They may cause corrosion Do not store open containers of this agent next to the machine Children Close supervision is necessary when the appliance is used near children Do not allow children to play on or in the appliance Using accessories Accessories must only be installed once approved by Miele Installing Unapproved parts may void the warranty and product liability Guide to the washer
29. e sub menu Extras The laundry is not spun and remains soaking in water This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program Selecting the final spin The washer is set default to the maximum spin speed of the wash program You can select a lower spin speed Press Start to start the final spin To finish the program Press the o button The water will be drained Press the o door button to open the door Deselect rinse spin and final spin m Select Without spin The laundry is not spun after the final rinse but the water is drained away After the drain cycle the washer goes immediately into the anti crease cycle 2 Program guide Cottons Hygiene 95 C to 70 C 61 Items Items made from cottons and linen i e bed linen baby clothing underwear Detergent Universal detergent Load size 6 5 kg Cottons Uni 60 C to cold Items Items made from cottons or mixed fabrics i e T Shirts pants Tip Wash dark colored fabrics with detergent for colors or a liquid detergent Detergent Universal or color detergent Load size 6 5 kg Minimum iron 60 C to 30 C Items Items made from synthetics mixed fabrics or wrinkle free cottons i e shirts Detergent Universal or color detergent Load size 3 5 kg Delicates 60 C to 30 C ltems Delicates made from synthetics mixed fabrics or viscose silk IS E Detergent Det
30. e drum door and the seal 12 3 Select a program Two program selection possibilities Select a Favorite by pressing the respective direct select button Select from the Program selection menu by turning the jog shuttle m l desired select Extras and or a delay start time with the respective submenus Coin mechanism If a coin mechanism operates the machine please regard the displayed request to pay If the door is opened after a program has started or if the program is canceled the credit is lost 4 Adding detergent Use detergent according to the laundry soiling and water hardness Too little detergent may cause ineffective cleaning of laundry fabrics may become gray and stiff over time grease stains on the laundry hard water deposits on the heating element Too much detergent may cause oversudsing with minimal drum movement poor wash rinse and spin results higher environmental burden see Detergent for more information Using the washer m Pull out the detergent dispenser drawer and add detergent Ul Detergent for the main wash Ly Only add detergent of the total recommended amount of detergent to this compartment for the pre wash amp Fabric softener or liquid starch m Close the detergent dispenser drawer Using the washer 5 Starting a program Start flashes when a program can be started m Press the
31. ed twice Detergent Universal detergent Load size 6 5 kg 26 Program sequence Main wash Rinse Spin Water Wash Water Rinses Rins spin Final spin level rhythm level Cottons Hygiene Ly A E Pa J J Cottons Uni ky A a 2 J J Minimum iron ed A Es 2 J J Delicates 4 V Sturdy ky A Es 2 J J Woollens a e 2 J J Silk Y Dress Shirts w A Si 2 V Denim e A lesi 3 J Disinfection e A saa 3 J J Kitchen linen e A e 2 J J Table linen ea A a 2 J J Cinane a A esi 3 y Pillows ty a ty 3 J Outerwear ES ry 3 y 3 J Proofing a 1 J J Towelling ea A esi 2 J J Sluice cas A 1 3 y y Spin J Lx low water level A normal wash rhythm ky middle water level Gentle wash cycle Y high water level Woolens D Silk For program sequence explanations see the following page Programs may be added from the Settings Supervisor level when activated by Technical Service 21 Program sequence The washer is equipped with a electronic control which determines the load size automatically The washer determines the required water consumption for each load and depending on quantity and water absorbency of the laundry Different program sequences and wash times will result The program sequence shown here represents the basic program with a maximum load Possible Extras a
32. er The fabric softener is not completely dispensed or too much water remains in the compartment amp The display shows a foreign language The four feet are not Level the machine see resting evenly on the Installation floor Instructions Leveling the washer There is no fault Lapping sounds at the beginning and end of the pump process are normal The water pressure is too Check and clean the filters in the water inlet hoses Select the Water plus Extra if desired Water softening Clean the detergent detergent additives tend drawer In the future add to clump the detergent first and then the water softener to the compartment The siphon tube is either Clean the siphon tube see incorrectly positioned or Cleaning and care clogged Cleaning the detergent dispenser drawer A different language was Select the desired selected under language The flag symbol Settings Language f leads you to the setting 35 Frequently asked questions Poor wash results Issue Possiblecause Solution The laundry does not get clean with liquid detergent Laundry has a gray sticky residue There is white detergent residue on dark laundry Items with greasy soiling are not clean after a wash program 36 Liquid detergents do Use powder bleach not contain bleaching Fill compartment LLY with agents Fruit coffee powder bleach and use a and tea stains may not di
33. ergent for delicates Load size 2 5 kg Quick wash 40 C to cold Items Small load of lightly soiled items which can be washed in Cottons Uni Detergent Universal or color detergent Load size 00 KO 22 Program guide Woollens 40 C to cold Items Items made from machine washable wool and wool blend fabrics Detergent Detergent for wool Load size 2 5 kg Silk 44 30 C to cold Items Hand washable items that contain no wool Tip Wash hosiery and lingerie in a lingerie bag Detergent Detergent for delicates Load size 2 5 KO Shirts 60 C to cold Items Shirts and dress shirts Tip Pre treat collars and cuffs depending on soiling Wash silk shirts in the Silk program Detergent Universal or color detergent Load size 2 5 kg Denim 104 C to cold Tip Before washing denim items turn them inside out Denim items bleed at the first few washes Wash dark and light colored items separately Detergent Liquid color detergent Load size 3 5 kg Towelling 95 C to 60 C Tip Use color detergent for dark colored laundry Detergent Universal detergent Load size 5 5 kg Drain To drain the water from the drum Spin Please select an appropriate spin speed 23 Program guide Additional programs The following programs can be added from the Settings Supervisor level when activated by Technical Service Kitchen linen 95
34. g the spin cycle Removing the shipping struts m Remove the left and right rotary protectors 1 Unhook the rotary protector with a screw driver 2 Remove the rotary protectors 47 Installation m Turn the left shipping strut m Turn the right shipping strut counterclockwise 90 with the counterclockwise 90 with the enclosed combination wrench enclosed combination wrench m Pull the shipping strut out m Pull out the shipping strut out 48 Installation N Movement of the washer without the shipping struts in place should be kept to a minimum The shipping struts should be stored on the back of the washer for future use They must be reinstalled before moving the machine Installing the shipping struts m Reinstall the struts by reversing the installation procedure m Close the holes with the rotary protectors and their caps m Fasten the shipping struts at the rear side of the washer Take care to insert the drill holes into the clamps 49 Installation Leveling the washer To ensure smooth operation the washer must be level Failure to level the machine can result in increased water and energy consumption as well as the washer banging during the spin cycle or walking across the floor during use 50 Adjust the four leveling feet The washer is leveled by adjusting the four feet The machine is boxed
35. gain Selecting Extras m Press the direct select button L1 The sub menu Extras shows Cottons Uni 1400 rpm Option Starch Stop Rinse hold Back m Select the desired Extras with the jog shuttle and confirm The basic menu shows again Repeat if another Extra is desired See Extras for more information 16 Favorites Saving a Favorite The basic menu shows all selected components Cottons Uni 40 C Pre wash Duration 00 53 00 h Extras Delay Start Di Save Back 4 v v v v m Press the direct select button L3J Assigning a direct select button Cottons Uni 40 C 1400 rpm Pre wash until now gt Cottons Uni ED 1400 rpm Saving to E 1 2 gt Back m Select the desired number for the favorite with the jog shuttle and confirm The favorite is saved with the individual selections and shows in the main menu To assign more favorites repeat the process with the remaining direct select buttons 17 Options The basic wash programs can be enhanced with Extras Accessing the sub menu Extras Cottons Uni 60 C Duration 0 45 h Extras Delay Start DI v 4 m Press the direct select button L1 The sub menu Extras shows Selecting Extras Cottons Uni 1400 rpm Option Starch Stop Rinse hold Back m Select the desired Extras with the jog shuttle and confirm Repeat if another Extra is desired A selected Extra is marked with a tick Pre wash For laundr
36. ions cannot drain it away Opening the drum door during a power failure As a safeguard against scalding the drum door cannot be opened if the wash water temperature is over 55 C 3 Frequently asked questions Opening the door during a Machines with a drain pump power failure or when the drain If the main drain hose is clogged water is blocked will be retained in the machine max 6 5 gal 30 N Disconnect the machine from the power supply N Caution If laundry has been washed at a high temperature the m Open the detergent dispenser water draining out of the machine drawer will still be hot Stop and allow it to cool before proceeding m Place a 2 quart capacity container under the drain tube m Turn the lint trap lid counterclockwise Do not remove it About 2 quarts of water will drain out of the hose If additional water remains in the machine tighten the lint trap lid and empty the container Repeat as necessary m Open the lint trap door 38 Frequently asked questions Once the flow of water stops If the drain filter is not tightened securely water will leak out when the machine is used Open the drum door Always make sure the drum is stationary before reaching into the drum to remove laundry A moving drum is extremely dangerous m Remove the lint trap lid m Remove any foreign objects or lint from the filter m Insert a screwdriver into the notch next
37. ity 30 Water hardness Hardness level Water quality soft moderate hard to very hard Water softener Water hardness in mmol l O 1 3 13 25 over 2 5 German hardness in d 0 7 7 14 over 14 If the water hardness level is between ll and III you can soften the water to reduce detergent consumption The detergent packaging should indicate the correct amount to use In your machine Add the detergent then add the water softener From then on you can then use the recommended amount of detergent for water hardness level Fabric softener liquid starch Fabric softener added to the wash program will make fabrics feel softer and will reduce static cling in the dryer Liquid starch is a synthetic starch wash used to give fabrics some stiffness Starch can be included in any wash program as part of the final rinse Automatic dispensing of fabric softener or liquid starch m Add the fabric softener or liquid starch to compartment amp Do not exceed the Max level mark The softener or liquid starch is auto matically dispensed in the final rinse At the end of the program a small amount of water remains in the fabric softener compartment amp If starching frequently clean the dispenser compartment and especially the siphon tube and conditioner channel See Cleaning the detergent drawer Detergent Separate starch m Dispense the amount of starch
38. nstallation instructions For safety reasons it is not possible to run a spin cycle before the first use A program must be run without laundry and detergent to flush out any residual water from the factory testing process m Open the water mains Welcome screen The Welcome screen shows when the washer is turned on for the first time Miele PROFESSIONAL Welcome The welcome screen will not show anymore when the total wash time of the washer exceeds one hour The display then shows the language selection Language m Select the desired language and confirm with OK 10 Shipping struts The display reminds the user to remove the shipping struts m f the shipping struts were already removed confirm with the button Otherwise remove them at this time then confirm Set the time of day m Set the hour by turning the jog shuttle and press to confirm m Repeat to set the minutes and confirm Press again to save the time of day Basic menu Cottons Uni shows m Press the flashing button Start The drum door must be closed Once the program ends the washer can be used for laundry 1 Sort the laundry m Empty all pockets Foreign objects left in pockets e g nails coins paper clips etc can cause damage to clothes and the machine m Pre treat stains Tough stains blood egg coffee tea etc or badly soiled areas collars and cuffs should be penetrated with
39. onal Headquarters 55G East Beaver Creek Road Richmond Hill ON L4B 1E5 Phone 800 643 5381 905 707 1171 Fax 905 707 0177 www miele ca info miele ca general enquiries professional miele ca commercial enquiries Mielecare National Service Phone 800 565 6435 905 850 7456 Fax 905 850 6651 service miele ca Tech Service Alteration rights reserved xx05 M Nr 06 523 700 00 en CDN
40. ordance with local and national safety regulations Repairs and other work by unqualified persons could be dangerous The manufacturer cannot be held responsible for unauthorized work The following section will help you avoid placing a service call by identifying issues you may encounter while operating the machine A wash program cannot be started issue Possible faut Solution The display remains off Upon selecting the program Spin the program does not start The display shows a foreign language The display is dark and the Start light flashes slowly 34 The washer has no The instructions in Before using for the first time were not followed As long as an error message is displayed a program cannot be started The machine goes into Standby The display shuts off to save energy Possible fault the washer is connected to the electrical supply the circuit breaker has not tripped Follow the instructions as described in the Before using for the first time chapter Regard the display messages Confirm by pressing the jog shuttle Press any direct select button The Standby function will be ended Frequently asked questions General problems with the washer Issue Possiblecause Solution The washer shakes during the spin cycle There are unusual sounds coming from the drain pump Large residues of detergent remain in the dispenser draw
41. r Water intake hose Drain hose Withdrawn shipping struts 3 Power cord gni Installation AA E dale MT Wij fa h 4 Shipping struts with rotary protectors 5 Water intake hose cold 6 Water intake hose hot 7 Drain hose for drain pump Drain hose for drain valve 9 Height adjustable feet 45 Installation Washer Dryer Stack Height Stacking kit with pull out shelf 65 le 1700 The Miele washing machine can be installed as part of a washer dryer stack in combination with a Miele tumble dryer An appropriate stacking kit is required Installation of the stacking kit must be provided by a Miele Service Technician Reinstallation of the machine lid When reinstalling the appliance lid check the firm fit of the cover at the rear bracket for a safe transport of the dryer 46 Installation on a base The machine can be installed on a steel base open or closed or be installed on a concrete base m Secure the two front feet of the washer with the supplied retaining clips when installing on a concrete base m Read the supplied Installation manual Coin mechanism The dryer can be equipped with a coin mechanism The reprogramming necessary for the coin mechanism must be done by a Miele Service Technician Empty the coin mechanism regularly Coins or tokens may get jammed Do not install devices to auto matically turn
42. re not considered The washer s sequence display will indicate the current cycle of the selected wash programs 28 Special features in the program sequence Anti crease The drum continues to turn up to 30 minutes after the program ends to prevent creases The washer can be opened at any time Exception The program Woollens has no anti crease feature 0 High Spin Before the wash program starts a high spin is carried out to remove air from the pillows After the spin the water is taken in by the compartment UL for the main wash 2 Pre rinse To rinse dust a pre wash without detergent is automatically added to the program 3 Outerwear The items will be spun only after the main wash 4 Pre rinse To remove heavy soiling the laundry will be pre rinsed twice To cancel a program A program can be canceled any time after a program start m Press the button Cancellation The wash water will be drained away m Open the drum door before starting a new program To change a program After the program start the spin speed can be selected until the final spin starts The Extras Starch Stop and Rinse Stop can be selected or deselected The temperature and the Extra Intensive can be selected or deselected up to 5 minutes after the program start Adding removing laundry during a wash program You can interrupt the following programs to add or remove a piece of laundry m Use the o button
43. se damage to laundry Favorites The washer has the option to save the most used wash programs on the direct select buttons The option Save must be selected in the Settings Supervisor level Contact Technical Service for access to this level Selecting Changing a Favorite Main menu 1 Cottons Uni 60 C 2 Minimum iron 40 C Settings f 3 Delicates 4U C Woollens 4 304 12 00 m Press any direct select button e g OJ Basic menu Cottons Uni Duration 0 45 h Extras Delay Start Back 4 v Ti v m urn the jog shuttle to select the component you want to adjust program temperature or spin speed m Press the jog shuttle to confirm the selection Depending on the selection the display shows one of the following submenus Important If no selection is made in the sub menu the display will switch back to the basic menu after 20 seconds Select a program Program Back selection Cottons Hygiene Cottons Uni Minimum iron m Select the desired program with the jog shuttle and confirm The basic menu shows again 15 Favorites Selecting a temperature Cottons Uni 60 1400 rpm Temperature cold amp B0 C m Select the desired temperature with the jog shuttle and confirm The basic menu shows again Selecting the spin speed Cottons Uni BO E 1400 y Spin speed 0 1400 rpm Ll m Select the desired spin speed with the jog shuttle and confirm The basic menu shows a
44. spenser ball for the be removed liquid detergent Never put liquid detergent and bleach together in the same wash compartment Not enough detergent was used to dissolve greasy deposits in heavily soiled laundry The laundry was soiled with grease oils lotions Add more detergent to laundry with grease stains or use a liquid detergent Run a 140 F program with liquid detergent to clean the washer before using it for laundry again The detergent was not completely dissolved because of hard water These residues are difficult to remove After drying remove white residues with a clothes brush In the future use liquid detergent Add a Pre wash to the program Use liquid detergent for the pre wash Use a powder detergent for the main wash Use detergent which is specially formulated for heavily soiled work clothes Contact the detergent manufacturer for more information Frequently asked questions The door will not open when the Door button is pressed The washer has no power Insert the plug into the outlet and the circuit breaker Power failure To open the drum door see Frequently asked questions Opening the drum door during a power failure The door was not Push the drum door on the locked side Then press properly closed the Door button There is still water in the Clean the drain filter and the drain pump as drum and the washer described in Frequently asked quest
45. sure that the appliance presents no danger to children while being stored for disposal Before discarding an old appliance unplug it from the outlet cut off its power cord and remove any doors to prevent hazards _ AAA Menu Settings P to adjust standard settings The washer electronic can be adjusted to changing demands with the settings The settings can be changed at any time Settings P Opening the menu Settings 1 Cottons Uni EDC Program selection nh Settings 3 Delicates 40 C Woollens 4 30 C m Select the Settings f in the main menu and confirm by pressing the jog shuttle Selecting Settings Back Language Water plus suds cooling m Select the settings to be changed and confirm If no selection was made in the sub menu the display will switch back to the Settings menu after 20 seconds Leaving the Settings menu m Press Back and confirm The display shows the main menu 58 Language The display contents can be shown in different languages The displayed language can be set in the sub menu Language P m Select the desired language and confirm with OK The flag behind the word Language is a guide to find the settings menu in case a foreign language is shown If the language setting was changed it is only valid for the current wash program Once the program ends the display will show the language which is set under Settings Supervisor level Water
46. the washer off i e a clock timer Available from your Miele dealer or Miele Installation site The washer cannot be built in N Do not install the machine directly next to or over an open floor drain or drain channel Moisture can penetrate the machine and damage electrical parts A concrete floor is the most suitable surface for the washer Concrete floors are less prone to vibration during the spin cycle than wooden floors ANI the machine is installed on a masonry or concrete base it must be secured with retaining clips to prevent the washer from vibrating off the stand during the spin cycle m The machine must be leveled and securely positioned m lo avoid vibration while spinning the machine should not be installed on soft floor coverings In case the installation must be on a wooden joist floor m Install the unit on a 27 9 46 x 23 g x 1 3 46 70 x 60 x 3 cm plywood base Ideally the base should be large enough to span several joists and should be anchored to the joists and not just the floor boards It is best to install the washer in the corner of a room where the stability of the floor is at its greatest Installation Installation m Use the front washer feet and the rear excess end to transport the washer from its shipping pallet to the installation site Do not lift the washer by the drum door N Ensure that the machine s feet and the floor are dry to prevent slippage durin
47. with the feet completely screwed in m urn the locking ring 2 counter clockwise with the enclosed combination wrench Unscrew each of the four feet as much as necessary by turning both the foot 1 and the locking ring 2 to the left m Check that the machine stands level m Once level hold the foot 1 steady with a wrench Turn the locking ring 2 with the combination wrench towards the machine NAII four locking rings must be tight against the bottom of the machine In addition check to see that the feet were not inadvertently unscrewed while tightening the rings Running a machine that is not level or whose feet are not tight may cause damage to both the machine and its surrounding area Installation Water connection Cold water connection A water faucet with threat must be provided on site If none is available the machine must be connected to a water line by a qualified plumber The water pressure must be within 14 5 145 psi 1 10 bar If the water pressure is greater than 145 psi 10 bar a pressure reducer must be installed If the water pressure is below 15 psi 1 bar there will not be enough water available for a complete fill The cold water hose blue mark is not suitable for a hot water connection m Connect the cold water intake hose blue mark to the cold water valve m Turn on the valve s and check for leaks The water intake hoses are equipped with screen filters
48. y with heavy soiling e g dust sand Starch Stop The water is drained away in the last rinse and the program stops Fill the starch directly into the drum and then continue the program See Detergent Separate starch for more information 18 Rinse Stop Intensive Water plus Options The washer stops after the last rinse the laundry remains soaking in water This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program For laundry with normal to heavy soiling or stains The total time for the wash program will be extended The washer comes factory set with the Extra selection Water plus activated The water level during washing and rinsing is increased Other settings for Water plus can be selected See Settings for more information Il Intensive and Water plus can be added from the Settings Supervisor level menu when the access is activated by Technical Service Extras which can be selected are shown in the sub menu Extras If an Extra is not shown it is not available for the selected program 19 Delay Start The delay start option allows you to select the program end time The program start can be delayed between 30 minutes and 24 hours Select the sub menu Delay Start Cottons Uni BI C 1400 ror Duration 0 45 h Extras Delay Start DI y y m Press the direct select button 2 The Delay Start menu shows Select the Delay
Download Pdf Manuals
Related Search