Home

Mercedes-Benz 2011 GL350 BlueTEC SUV Automobile User Manual

1. MioMap is a navigation system optimized for in car use It provides door to door navigation for both single and multi point routes using adaptable route parameters MioMap is capable of planning routes throughout the whole installed map set Unlike some other products MioMap does not require that you change maps or switch to a poorly detailed general map to navigate between map segments or countries You always have complete freedom to go wherever you wish Just select your destination and go You do not need a stylus to use MioMap All screen buttons and controls are designed so that you can operate them with your fingertips You can access all functions of the program by using hardware and screen buttons With the help of these buttons you can travel through all the screens of the program Most of the screens especially menu functions and settings can be accessed from several other screens minimizing the number of actions needed to reach the desired function When using MioMap you do not need to double tap or tap amp hold the touch screen as these functions cannot be used reliably in a moving vehicle A single tap triggers most of the screen controls The only exception is drag amp drop for moving the map Most of the screens have a Return button T i in the top left corner This arrow returns to the previous screen or directly to the map screen settings screens also have a Help button LSZ in the top right corner T
2. MioMap v3 3 C320 Navigation software for MioMap v3 3 C320 US English July 2007 v1 00 Copyright note The product and the information contained herein may be changed at any time without prior notification This manual nor any parts thereof may not be reproduced or transmitted in any form either electronically or mechanically including photocopying and recording without the express written consent of Mio Technology Limited 2007 Mio Technology Limited Whereis map data is 2007 Telstra Corporation Limited and its licensors Data Source 2007 Tele Atlas N V 2007 Tele Atlas North America Inc Geographic Data Technology Inc All rights reserved This material is proprietary and subject of copyright protection and other intellectual property rights owned by or licensed to TeleAtlas North America Inc Geographic Data Technology Inc The use of this material is subject to the terms of a license agreement You will be held liable for any unauthorized copying or disclosure of this material Canadian Data DMTI Spatial Canada Portions of Canadian map data are reproduced under license from Her Majesty the Queen in Right of Canada with permission from natural resource Canada Austria BEV GZ 1368 2003 Denmark DAV France IGN France Great Britain Ordnance Survey data with permission of Her Majesty s Stationery Office Crown Copyright Italy Geonext DeAgostini Northern Ordnance
3. If you wish to receive TMC data from a source you need to subscribe for this button will lead you to a new screen where you can manage your subscription Visit the web site displayed on this page and when requested enter the information also displayed No TMC subscription To purchase 1 year TMC subscription go to hittp www mio tech com tme and enter Device type DC EMU UUID 3DEZ0FO83DE20F08 le Now tap Enter code and key in the received TMC subscription code using the keyboard Tap Done when finished Enter TMC subscription code 4 9 2 3 Exclude selected station If you wish to receive TMC data from another radio station push this button The radio station will be added to the list of excluded stations MioMap will start searching for another TMC station and will always skip the excluded station in the future 4 9 2 4 Show excluded stations This button opens the list of excluded radio stations Tap any of the stations in the list then tap Enable to allow MioMap to accept TMC information from this station 59 ei TMC Control Centre iaw mot eg 4 9 2 5 Sorts events by distance type The list of traffic events can be ordered by their distance from the current position or by their type Tap this button to toggle between the two possibilities 4 9 2 6 Use traffic information This button is enabled by default which means that TMC messages are used in route planning Tap this button to have MioMap i
4. It is easy to change between 2D and 3D modes You have two options You can use the Tilt up and down buttons Page 27 to tilt the map seamlessly between 2D and all 3D angles or you can use the switch in the Quick menu Page 43 to quickly switch between the two modes 17 4 2 2 Zoom levels MioMap uses high quality vector maps that let you see the map at various zoom levels always with optimized content Street names and other text objects are always displayed with the same font size never upside down and you only see as many streets and objects as needed to find your way around the map Zoom in and out to see how the map changes in either the 2D or 3D view Changing the scale of the map is very easy You can use the zoom icons Page on the Split screen Note If you need to zoom out briefly to locate your position on the map use the Overview mode instead of zooming out and back in The Overview mode is a 2D North up view that can be started by tapping the compass button on the right Page 28 Note MioMap has a special Smart Zoom function for navigation that automatically rotates scales and tilts the map in 3D map mode to always give you the optimal view in your current situation When approaching a turn it will zoom in and raise the view angle to let you easily recognize your maneuver at the next junction If the next turn is at a distance it will zoom out and lower the view angle to flat in order to let you see the road i
5. Page 86 Lock to Position When GPS position is available MioMap will automatically keep moving the map to always have the green arrow representing your actual position 91 on the screen You can move the map to lose this position Then the Follow button appears on the screen Tapping it will re enable Lock to Position See also Page 27 Map Orientation MioMap is able to rotate the map for your convenience If you choose Track up mode the map will be rotated to look in the direction of your heading Selecting North up the map remains oriented to have North toward the top Use the left and right hardware buttons to turn your map in the direction you wish This will immediately turn off the automatic rotation A small compass in the top right section of the map screens Page 28 will always show the current direction of the map Map orientation should not be mixed up with Screen orientation North up A kind of map orientation having the map rotated to have North toward the top of the screen See also Track up and Map Orientation POI Points Of Interest exact map locations of important points saved in a database together with their name category and subcategories e g Service Fuel Petrol address phone and fax number and other important information Use the versatile search system in MioMap to find the appropriate POI near you your destination or any other given location on the map Page 69 You can also have your favorite places
6. This one has more colors and represents more values e a fast blinking green lamp means that there is communication with the GPS and data is being received e other colors may not appear with a built in GPS Should any of these appear this means a faulty operation of your device 4 4 3 GPS data quality indicator In the top left corner there is a satellite dish to show the quality of the GPS position Different colors represent different signal quality e black with a red cross means there is no connection with the GPS device This should never be the case if your device has a built in GPS e red means the GPS is connected but no GPS position is available e if yellow means 2D reception A GPS position has been acquired MioMap is ready for navigation but the GPS Is using enough satellites for calculating the horizontal position only Elevation data is not provided and the position error may be significant E green means 3D reception The GPS receiver has enough satellites to calculate altitude Position is generally correct yet it can still be inaccurate due to different environmental factors MioMap is ready for navigation 4 4 4 Time synchronization In the top right corner of the screen you have another button that leads to a new screen where you can synchronize the clock of your PNA to the very accurate time provided by the connected GPS Turn on the Auto Correction switch to let MioMap frequently check
7. States and on the left in the U K on two way roads You always see this corrected position on the map The position given by the GPS is not displayed but this is the information recorded in the track log When recorded track logs are shown on the map the line is not corrected You see the positions reported by the GPS Note The Lock on Road feature can be turned off in Advanced settings Page 86 for pedestrian use When switched off the arrow is displayed at the position reported by the GPS receiver When the GPS position is lost the arrow turns gray and remains at the last Known position 4 2 7 Selected map point also known as the Cursor lf you tap the map somewhere or select a specific item in Find Page 61 it will become the selected point on the map marked with a small red dot and permanently radiating red circles to make it conspicuous at all zoom levels even when it is in the background of a 3D map view You can use this point as starting point via point or destination of your route you can search for a POI near to it or save it as a POI The cursor when visible is also the reference point for map scaling Note When your GPS position is available and Lock to Position Page 27 is active the cursor is the current GPS position the Green arrow When you select another point by tapping the map or using the Find menu Page 62 the new Cursor is shown on the display with the red dot and the radiating re
8. Survey of Northern Ireland Ireland Norway Norwegian Mapping Authority Public Roads Administration Mapsolutions Switzerland Swisstopo The Topografische ondergrond Netherlands Copyright dienst voor het kadaster en de openbare registers Apeldorn POI data by infoUSA Inc Copyright 2007 All rights reserved Thank you for choosing MioMap as your door to door in car navigator Read the Quick Start Guide first and start using MioMap right away This document is the detailed description of the software Although MioMap can easily be discovered by experience it is still recommended that you read through this manual to clearly understand the exact function of each button and icon Table of Contents t Warnings ana safety INIONMNANON eieiei 9 2 ae Reg e EE 10 3 Operating MioMap COMtUOIS sic tree toe neared adenine 11 Sal EE DUN ONS i252 ge 11 3 1 1 OWED OM e GE 11 32 OCKEEM DUTONS EE egene eege eegene 12 3 2 1 Bee cle io do mpemmucnn res mrtrrrnt orton tment rey trey Crny parr etre ie nte or erent crn corer 12 3 22 LISESI lO S EE 12 Dean MAG a a Dem PCRA te Bren rE RMT Ot Bette ta fe vena ot mater a er eC nn te mre re eee ce 12 oy OWINGS EE 13 3 2 5 Switches in the Quick EIERE 13 326 Vinuar keypads asc 13 3 2 6 1 ABC type keyboard S sssini anian 14 3 2 6 2 OWERTY ype Key OO al OS E 14 3 2 6 3 The numeric keyboard cccceeccceeeeceseeceeeeceueeceueeceueeceueesaeeesees 15 4 Discovering the progr
9. Track up automatic rotation mode 4 3 9 GPS position status No 11 Similarly to the icon found on the GPS Data screen Page 35 the map screen also inform you about the GPS signal status 1AN e The black satellite dish with the red exclamation mark shows there is no connection with the GPS receiver GPS navigation is not possible Devices with a built in GPS receiver are permanently connected so this icon may not appear under normal circumstances N e Red shows there is a connection but the signal is too weak to give a position GPS navigation is not possible e Black shows there is a GPS position and navigation is possible When only one arc is shown the position is 2D no altitude available and position error may be significant yet MioMap is ready to navigate N e T Ablack dish and two arcs represent a 3D GPS position MioMap is ready to navigate 29 N o a When small car symbols are displayed under the dish TMC information is available 4 3 10 Battery status No 12 The status of the battery is also shown by MioMap You can estimate the available power reserve from the length of the bar inside Some examples ES e The thunderbolt in the battery shows the battery is being charged es e Battery is not charging but it is at full capacity Battery in not full but there is sufficient reserve capacity IS e When the inside of the battery turns red the battery needs recharg
10. are available Set Date amp Time Format 6 5 Advanced settings These screens let you set a large number of different advanced settings and initiate some special functions These settings and functions are divided into groups Advanced Settings Tap on any button to set the corresponding parameters All but the last one will open new windows where you can make your desired changes 6 5 1 TMC settings This button opens the TMC Control Center otherwise opened from the List of TMC messages Page 58 using the Settings button TMC settings are described here Page 58 6 5 2 Backlight settings Here you can set how the display backlight behaves when using MioMap 82 These settings are independent of the settings of the other applications of MioMap V3 3 6 5 2 1 Power management At the top of the screen you can set how the backlight will behave when the screen has not been touched for a while Backlight always on You can choose to have the lights always on Smart powersave You can also initiate this special feature of MioMap When running on battery Smart Powersave will light up the screen only when you press or tap a button or if MioMap has something to show you After a few seconds the light level decreases and after another few seconds the backlight turns off This helps you achieve a longer battery life 6 5 2 2 Brightness You can set the backlight level separately for both daylight and night modes thus e
11. can also add further cameras you discover using the Add Cam button in the Cursor menu Page 31 The types and parameters of speed cameras are explained here Page 54 In this section you can enable or disable the warning for Known cameras and you can also fine tune the way MioMap warns you when you approach one of these cameras Note Detecting the location of speed cameras may be prohibited by law in certain countries or regions Be sure to check if it is legal to turn on this warning or not before doing so 6 1 6 Speed Camera Options When speed camera warning is turned on the values of these controls determine how the user will be notified when approaching a speed camera 74 6 1 6 1 Audible Warning You can disable the audible warning have a simple warning when you are warned only if you exceed the speed limit when approaching a camera or a complex sound with repeated beeps as you approach the camera In case of section control cameras you will also hear these beeps while you are between the two cameras these cameras work in pairs You are warned well in advance The distance MioMap starts warning you before reaching the camera depends on your speed The higher the speed the earlier the warning starts 6 1 6 2 Visible Warning Besides this MioMap can pop up a visual warning with only the symbol of the camera above the speed limit sign on the Split screen or you can ask for details as described below Appro
12. color schemes a few minutes before sunrise and a few minutes after sunset Page 73 As additional information to help your orientation the sun is shown in the sky when you display the map in 3D mode with a low viewing angle and the sun is near the horizon Elevation When the GPS receiver can see at least four GPS satellites it can determine its current position in three dimensions In this case the elevation is calculated together with the latitude longitude position Note that some older GPS units may provide incorrect elevation data because they use a simple ellipsoidal earth model rather than a database that contains local sea levels You should also be aware that the elevation value is generally less accurate by at least a factor of 2 than the horizontal position See also 2D 3D GPS Reception ETA Estimated Time of Arrival A frequently used expression in navigation It represents the time when you will reach your destination based upon calculations using the remaining part of the route and available information of the roads used This estimation can only be used as a general reference It will not be able to take into account your future speed or the traffic delays In MioMap this value is shown as Estimated Arrival on the Route Information screen Page 38 ETE Estimated Time Enroute Another frequently used expression in navigation It represents the time needed to reach your destination based upon calculations using the remai
13. configured Page 76 navigation stops and will be activated again when you are back on your original route 4 7 3 2 Delete Tap Delete to erase the active route along with all its route points start via points and destination If you later decide that you need the same route again you will have to rebuild it from scratch MioMap will warn you before deleting route data This function has a special role if you have used the Avoid feature during your journey When you arrive at your destination the route line disappears on the map and navigation stops The route is now practically deleted but if you plan a new route the roads maneuvers and areas excluded from your route will also be avoided when planning the new route Tap Delete to completely delete your previous route together with its Avoid restrictions Note When a POI item is used as a route waypoint deleting the route will not delete the POI item itself just its role in the route 4 7 3 3 Itinerary This function opens the itinerary written driving instructions of the active route The Itinerary has three different display modes and two functions Display modes Display modes are different only in the number of events displayed in the list List items are always shown with all information available including pictograms of the needed action and distance of the event from the previous list item The Itinerary is live and constantly updated when navigating a route T
14. make MioMap always show your exact position This feature is also useful for geocaching a popular GPS based treasure hunt activity Note By turning off Lock on Road you also turn off the GPS position error filtering The position shown on the map will be subject to all position errors and position fluctuations 6 6 About screen Tap About on the Main menu screen to open this screen The About screen is not used in normal navigation It is there to inform you about the map licenses you have the creators of MioMap and the legal aspects of using the program 86 8 7 Troubleshooting guide Thank you again for purchasing our product We hope you will enjoy every minute of using it However you may face difficulties before you get really accustomed to MioMap In such cases please refer to this table of frequently encountered problematic situations cannot find the green arrow that would show my location Navigation does not start Check the GPS status icon on the map screen Page 29 or the GPS Data screen Page 34 It is likely that the GPS cannot determine your position Move the GPS out of cover to get a position fix The GPS is connected sending valid position data yet cannot see the green arrow that would show my position You should see a large semi transparent Follow icon Lock to GPS position and heading No 6 on the screen Tap this to re enable the Lock to Position feature that moves the map b
15. proceed to the House Number Input screen Just enter the house number to specify the exact address lt Enter Name Postcode gt lt Enter Name Postcode gt aea ae ee A a You can accomplish this by using an alphabetic input screen either an ABC or a QWERTY type You only need to enter the first few letters as the program only searches among the cities that exist in the given state or country If the name of the city is of more than one word the searched pattern can be any or the combination of those You can search for multiple partial words by inserting space characters in the pattern For example Key West in Florida will be found if you enter Ke W or even We K any word order will do You do not need to enter accents when searching for a destination Type only the base letters the letter most similar to the accented one and MioMap will search for all their combinations in the database e g for the Canadian town Deleage you only need to type Deleage and the rest is done by the program As you start typing MioMap will calculate the number of cities matching your pattern s This number is shown at the right end of the input line If all the matching city names can fit on one screen the sound played when hitting the key will be different and MioMap will show you all the results in a list You can select the one you are looking for by tapping the appropriate list item Note When more than 300 matching
16. save a camera location from the Cursor menu Page 31 the speed limit of the road if available is used by default but you can change this value with the given control 4 8 4 Add a new camera or edit an existing one You can add new cameras delete or modify the parameters of existing ones using the Add Cam or Edit Cam buttons of the Cursor menu Page 31 To delete an existing camera first tap Edit Cam then Delete 4 8 5 Change the settings of the camera warning You can turn on and off the camera warning and fine tune its settings in General settings Page 74 and Page 74 4 9 TMC Traffic Message Channel where available MioMap can provide you with even better routes if Traffic Message Channel TMC information is available The TMC is a specific application of the FM Radio Data System RDS used for broadcasting real time traffic and weather information Note TMC is not a global service It may not be available in your country or region Ask your local dealer for coverage details You need a TMC receiver and TMC antenna attached to your PNA to receive TMC information lf public TMC data is broadcast at your location MioMap will automatically take into account the TMC information received You do not need to set anything in the program The receiver will automatically search the FM radio stations for TMC data and the decoded information will immediately be used in route planning The moment MioMap receives tra
17. saved as My POI in MioMap Track log In MioMap you have the possibility to record your journeys using the position data your GPS provides in every second or every few seconds depending on your GPS settings When you start the recording position data are saved in the database until you stop recording it This set of sequential GPS positions is called track log Each set of consecutive positions has a name originally it is the time of recording but you can change it to any name you like and a color in which it can be displayed on the map Later you can replay the journey on the screen of MioMap as if it were happening again This is good for demonstration purposes or for analyzing your maneuvers during the trip See also Page 47 Track up A kind of map orientation when the map is rotated to look always in the direction of your heading See also North up and Map Orientation Via point Routes in MioMap can have several as many as you want different destinations to reach in a specific order All these points except the final destination are called via points as the route goes via through them The destinations can be seen in the Route Information screen on the Route line Page 37 and each via point is announced by the voice instructions as you approach and when you reach it Should your via point serve as a stopover navigation continues automatically as you depart Navigation will resume even if you turn off and on your device o
18. the name of the track log Rename button e change the color of the track log Color on the map selector e have it displayed on the map Fit to screen button e Replay push this button to see a simulation of the saved track log on the map A green icon Page 30 will appear on the map screen to let you know it is not a fly over but a simulation based on a real saved log e Delete you can delete a track log if it is not needed any more MioMap will ask you to confirm this action 48 e Track log options this button in the upper right corner leads to a settings screen where you can set up the track logging parameters e Update interval is how often track points will be saved Position information is normally received once a second from the GPS If you do not need such a detailed log you can increase this number to save track log space e Current autosave track size this figure shows how much memory is used by the automatically saved track logs e Enable auto saving when auto saving is enabled you do not need to turn track log saving on and off manually MioMap will automatically start recording the track log as soon as GPS position is available e Limit track DB size here you can set whether or not to maximize the size of the database where the automatically saved track logs are kept e Maximum track database size here you can set the maximum database size if the track database size limit is enabled using the previous sw
19. 8 Route Recalculation Once a route is planned this setting will tell MioMap what to do when you deviate from that route 6 1 8 1 Automatic The route will be recalculated automatically a few seconds after you go astray 6 1 8 2 Ask First MioMap can also ask your preference each time you leave the planned route The route will not be recalculated until you make your choice from the menu that automatically appears also explained here Page 38 Route Recalculation Route Recalculation Your options are e Recalculate MioMap will recalculate the route with the previous settings The result is the same as if Automatic recalculation was selected e Drop Next Via Point Delete Route MioMap will remove the next via point from the list and recalculate the route without it If you have only one target left the label of the button will be Delete Route and it will end navigation e Bypass if you have deviated from the original route because of a traffic jam or roadworks you can instruct MioMap to avoid the original route for a specified distance e Cancel you can exit without recalculating the route Navigation stops and will be activated again when you find your way back to the original route 6 1 8 3 Disabled lf you stick to the original route and you wish to get back to it on your own you can disable recalculation This way guidance will stop until you return to the recommended route on your own 6 2 Sound settings Setti
20. Name gt Selecting the center of the city lf you wish to navigate to the city displayed in the top center of the screen just tap List before entering any letters The search result will be the center point of the city where its name is displayed on the map Note This point is not the geometrical center but an arbitrarily selected point chosen by the creators of the map usually the most important intersection in case of a small town or village and for larger cities an important intersection in the city center Selecting a street lf you are looking for an address or an intersection within the selected city shown at the top of the page you need to first enter the street name you are looking for Tip If you are looking for an intersection choose the street that has a rare or unusual name first This way you need to enter fewer letters to get the list of results You may also choose the shorter of the two streets first This way it will be faster to choose the second one from the list of crossing streets after the first street has been selected Tip You can search for both the type and the name of a road If you have the same name appear as Street Avenue Boulevard Road Place and Court you can get the result faster by giving the first letter of this too For example searching for Pi A will result in Pine Avenue skipping all Pine Streets and Pine Roads Tip Should the name of the street be a prefix for several
21. S lr Groups shown with a gray icon Gd are hidden blue icons are visible on the map while the ones shown in two colors e have some of their subcategories shown and some others hidden If you highlight any of the POI groups by tapping them the button in the bottom left corner will become Show if the POI group is hidden or Hide if the group is shown or partly shown Tip To make a partly shown group fully shown tap this button twice First you will hide the whole group and then you will have it displayed with all its subgroups Tapping again the highlighted POI group except for My POI described later opens the list of subcategories of that group Here you cannot see bicolor subgroups as visibility can only be set for the top two levels of categories Showing and hiding a subgroup is done the same way as for the main groups Manage My POI By highlighting then tapping again the My POI switch on the Manage POI main screen you can manage the POI groups and items that you have created Note The group Unnamed only appears if you have previously saved a PO item without creating a new POI group for it Tapping any of the group names will open a list of POls saved in that group This list is similar to the list of POI results in Find The POls are ordered based on their distance from your current position If GPS position is not available or you have disabled Lock to Position by tapping the map the POls will be order
22. SA etc some of the maps contain state information If the city you are looking for is ina different state tap Other City then Change State from the list of recently used cities then select the appropriate state Should you wish to search for an address in the whole country just tap All states at the beginning of the list Alabama Alaska Arizona Arkansas California When the state is selected you need to select a city by entering a part of its name or postcode then selecting from the list of available matching items as described before Note In Australia you can skip this part by tapping List before entering any letters This way you can search for a street name in the whole state In other countries this step is compulsory If you press List before entering any letters the list of cities will appear in alohabetical order Changing the country lf your destination is in another country tap the Change Country button in the top right corner of the state selection screen Australia USA etc or the city selection screen and select the country from the list 5 3 1 2 Selecting a street or a city Once the city or state in Australia is selected you can continue by specifying the street you are looking for Note As for the city input only available letters are active when entering the first word of the street name All other letters are inactive and gray New York NY United States lt Enter Street
23. able or disable Smart Zoom When disabled the zoom and tilt levels on map screen during navigation are fixed and you can set them manually using screen buttons Page 27 Turn this feature on to let MioMap zoom and tilt the map automatically to always show you the best view for your navigation needs 6 5 5 2 Enable Overview mode You can configure how the Overview mode is triggered when the next turn is at a distance The Route event distance will determine when MioMap switches to the Overview or back to the Navigation view The Overview zoom level will determine the fixed zoom level of the map in both automatic and manually selected by the Map orientation icon see here Page 28 Overview modes You can change the zoom level manually at any time the Follow button will not be displayed but when you enter the Overview mode again the zoom level will be reset to this value You can also move the map in Overview mode Then the Follow button will appear and when pushed it will move the map to have your current position in the middle again Note when this automatic feature is disabled you can still enable the Overview mode manually as described here Page 28 6 5 5 3 Keep position on road Lock on Road MioMap is normally used for vehicle navigation therefore Lock on Road will display the position arrow precisely over roads seamlessly correcting small GPS errors For pedestrian use you may consider disabling Lock on Road to
24. aching a fixed or built in camera you will see the speed limit checked by the camera and the remaining distance to reach the area monitored by the camera AL E231 8 4 m 0 06 46 0 06 46 LE SE Ge BCS With mobile cameras you can only see the distance from the measured area as there is no speed limit set When approaching the first of section control camera pairs you will see the same data as with a fixed camera speed limit and distance Then while being between the two cameras your frequently updated average speed is displayed below the speed limit nE SS wiimit mer Bussum 55 gt e D r syp O e SE G ER i 0 04 40 Current time Arrival time RRC WI 19 6 1 7 Set Favorite Destinations You can select two of your most frequent destinations to be your favorites Page 71 You can start navigating to either of them by only two taps on the screen The Original names of these points are Home and Work You can rename them and specify their locations To determine the location you can use the same Find menu options Page 62 as for a route destination and depending on that choice and the information available the location will be shown here as a street address a latitude longitude position or both Note If you tap either of your favorite destinations in the Find menu Page 71 before defining it MioMap will offer to take you to this screen to set it up 6 1
25. ack to your actual location The green arrow shows my location but cannot see the route Orange or red line and no voice instructions are announced It is likely that you have no active route Check the upper left corner of the Split screen Page 26 if you can see the indication for the next turn or not If this field is blank you have no route planned so you need to create one first It is a common mistake to find a destination show it on the map but forget to tap the Route To button in the Cursor menu Page 31 to create the route Be sure to follow these steps or always plan your routes by using one of the buttons on the Main menu screen This will ensure your route is calculated automatically as soon as the destination has been selected cannot see the Follow button on the screen yet the map is not rotated during driving Look for a small red N letter on the compass icon Page 28 or an airplane icon instead of it It is likely that you had initiated the North up map orientation or the Overview mode unintentionally Tap this icon to revert to Track up mode with automatic map rotation Creating a multi point route have tapped the Route To button once for each destination but only the last one appears in the list all previous points have disappeared 88 The Route To button is for starting a new route only For a single route you tap this when the destination is selected Multi point routes can be
26. am Screens are also accessible from each other to reduce the number of actions needed to initiate a function or change a setting Most parts of the program are directly accessible from here by using the buttons described below ops Oa Ta Address Favorites Map SS g History Settings No Content Explanation Button to open Address search Page 62 Address C Button to open Favorites Page 71 Favourites Button to open the map screen Page 24 Cockpit Map l sy Button to open POI search Page 69 POI 16 No Content Explanation VS Button to open History Page 68 Co Button to open Settings Page 72 Button to exit MioMap 4 2 The map The most important and most frequently used screen of MioMap is the screen with the map Split screen The elements of the map are described here For the controls and special functions see Page 24 The current version of MioMap is primarily intended for land navigation That is why maps in MioMap look similar to paper roadmaps when using daytime colors and 2D map mode However MioMap provides much more than regular paper maps can The look and the contents can be changed 4 2 1 2D and 3D map views Besides the classical top down view of the map called 2D mode you have the possibility to tilt the map to have a perspective view 3D mode that gives a view similar to that seen through the windscreen with the possibility to see far ahead Note T eee ml eg
27. am through the screens ss sessnesssenssrresrenerrnrrrsrrrerren 16 AM SAIN EE 16 es NUM A EE 17 4 2 1 2D and SD VAD Vl OW Sos oie cece tie as treated tae eltiees yas tian cae ede Gee 17 Bee DOOMMICVCIS ce ies cto cnis cease fates ft sete fa geed 18 4 2 3 Daylight and night Color schemes sannannnennennennnnnnnnnnnnnnnnnnnnnnenennn gt 18 424 OreetsandroddS siareiros 19 4 2 5 Other ee 20 4 2 6 Current position and Lock on Hoad 20 4 2 7 Selected map point also known as fhetCureor 21 4 2 8 Visible POIs Points of Interest 00nnannnannnannnannnnnnannnannnnnnnnnnnnnnenne 21 429 Roadsalety cameras EE 23 4 2 10 Elements of the Active Houte 23 4 2 10 1 The start point via points and the destination cccceseeeeeees 23 4 2 10 2 Animated turn guidance 23 AZNO NMC TOUS MMC EE 23 4 2 10 4 Roads in the route excluded by your preferences sessse1nne 24 4 3 The map screen Split screen 24 4 3 1 Turn Preview NO DOE 26 432 ZOOM Mana OUl NO 2 EE 26 4 3 3 Tilt yo and down No 4 amp Di 27 4 3 4 Follow mode lock to GPS position and heading No Gi 27 A320 OUSO INOS EE 28 4 3 6 MOP ANCL EE 28 AS MEn NOO EE 28 4 3 8 Map orientation and Overview No 0 28 4569 GPS position sialus Te On EE 29 ASO Baler Stats NO T2 EE 30 4 3 11 Sound muting NO 13 30 4 3 12 Track Log recording playback indicator No 14 30 Aol Cursor menu NO 15 iscssctstenidicnedandiaudundubstetchesaiiwa
28. and correct the internal clock of the device with the GPS time Below that button you will see the current values of the GPS and the device clocks You can check here whether any correction is needed Tap the Ir button to manually synchronize the time Below the PNA time you have hour and minute controls to manually correct the time with or without a valid GPS time It also gives you the chance to correct the time after synchronization if your PNA does not support time zones or daylight saving time 4 5 Route Information screen The Route Information screen has all the data and some of the functions you need while you navigate Some additional functions can be found in the Route menu Page 49 Without an active route one of the buttons is inactive and route data cannot be displayed You can open this screen by tapping the Info button in the Route menu Page 54 36 4 5 1 Route data displayed for destination and via points In the top section of the screen you see information about the current route These fields are continuously updated while you keep this screen open When you open the screen all fields contain information on reaching your final destination Tap any of the fields to see data on the via points starting from the first one through the final destination again 4 5 1 1 Route line The upper part of this screen shows your planned route as a horizontal line Its leftmost point is the start of the route the rightm
29. ce neieene adie Sun hiuadteadenedtenladede 93 1 Warnings and safety information MioMap is a navigation system that helps you find your way to your selected destination It will determine your exact location with the help of the built in GPS receiver and antenna The position information obtained from the GPS receiver will not be transmitted anywhere so others will not be able to track you If you are the driver of the vehicle we recommend that you operate MioMap before beginning your journey The driver s attention should always be on the road Plan your route before departure and pull over if you need to change route parameters MioMap has a built in optional Safety Mode that will prevent you from using the screen functions if your car is in motion Unless a passenger will be the only one to operate MioMap we strongly encourage you to turn on the Safety Mode It is also important that you look at the display only if it is absolutely safe to do so You should always observe traffic signs and road geometry before you obey any instruction from MioMap If you need to deviate from the recommended direction MioMap will automatically suggest a modified route according to the new situation Never place the PNA where it can obstruct the view of the driver is within the deployment zone of airbags or where it can cause injuries in case of an accident For further information please consult the End User License Agreement 2 General information
30. created after you have established a single route Add points to the single route by using the Add Via and Continue buttons Applying Route To again will delete the whole route In your case only single routes existed before so they were deleted without a warning message If you already have a multi point route MioMap warns you before deleting the whole route I enabled the speed warning as soon as bought the product but I have just been fined for speeding because MioMap failed to warn me For an accurate speed warning the actual speed limits of each street and road must be present correctly on the map This is a relatively new feature of digital maps so it may not be available in some countries and its accuracy still has much room for improvement ask your local dealer for the details in your region This feature can help you in several cases but it cannot be considered as serious speed control That is why it can be turned on and off separately from the reliable voice guidance Page 73 would like to create a new POI but there are others near its location and the new menu point POI opens the list of POI instead of creating a new one Look for the New button in the bottom left corner of the newly opened list Using that button you can add your new POI as if it was opened from the Cursor menu 89 8 Glossary The manual may contain many technical terms Please look below for an explanation if you are unfamiliar
31. d circles 4 2 8 Visible POls Points of Interest MioMap comes pre installed with millions of built in POls and you can create your own POI database as well Having all of them displayed on the map would make the map too crowded To avoid this MioMap lets you select which POls to show and which ones to hide Page 44 using their categories and subcategories POls are represented by icons on the map For a built in POI the device displays the icon of the subcategory of the actual POI For points you create it is the icon you had chosen when you created the POI it can be changed later These icons are large enough to recognize the symbol and semi transparent so as not to cover the streets and junctions behind them When the map is zoomed out the icons are not shown As you zoom in small dots appear at the locations of visible POls Zooming in further makes the full icons appear If two points are too close to each other so that icons overlap a multi POI icon amp is shown instead of individual ones Zoom in more to see them separately Should the two POls have the same icon this icon will be displayed instead of the multi POl icon Note When navigating POI icons can be disabled together with street names Page 85 If you still need this information during your journey just drag the map to disable Lock to Position This will restore street names and PO icons immediately Now tap Follow to reactivate Lock to Posi
32. dlamatantacaetaindiasetnaiuees 31 AON EEGENEN EISE SEA Ee 33 4 3 15 Travel and Route data NO It 33 4 3 16 Distance to next turn NO 181 33 4 3 17 Next street Next city NO 1901 33 A316 AD PFOAChING NeXT TURN INGOs 20 EE 34 4 3 19 Current speed limit NO 211 34 4 3 20 Info Panel content NO 2321 34 SE EE Ee 34 4 4 1 GPS datadi play DE 35 AAS GPS COMNECHONNGICAION serennu a Gecetuesteett 35 4 4 3 GPS data quality mdicator ccc ecccceececceseeeceeeeceeeecseeeecseeeeseeeeeas 35 4 4 4 ime synchronization cccccceecceececeeeceeeceseeceeeceueceueeseeeseueenaeenseesees 36 AS ROUTE INTORMATLION SCRECM EE 36 4 5 1 Route data displayed for destination and via points 37 4 5 1 1 ROUTING EE 37 4 5 1 2 EIS TANG CAE CN EE 38 4 5 1 3 MONO EE 38 4 5 1 4 PUNY SI ege 38 4 5 1 5 ESME ATIVA stele hace tenes osstagalocetusdlosstasafacstucalveucanataenquestase 38 4 5 1 6 DSSUINATIONY Via DOIN EE 38 A5 2 VWWabMinG ICONS e ee EE EES 38 4 5 3 RITO SCG O Mecane T 40 ASDA EEN eree 40 ARO UNOF EE 40 4 6 1 Travel and Route data for destination and next via point 40 A622 INGA EE 40 4 6 3 Nearby TMC events where available 40 AOA re Se ee mee eee ne eee eee eee rene eer ee ere eee ee 41 E Eege 42 4 7 1 FNC CR E 42 A RA DR ER 42 4 7 2 1 2D FSD Map E TEE 43 4 7 2 2 ZOOM amp Tilt fewitch 43 4 7 2 3 Daylight amp Night Modes switch cccccccesseeeseeeeseeeeseeeeseeeese
33. ed by their distance from the Cursor ley 412 Mout Holyoke Ave Pacific Palisades CA 90272 FAI O66 avenue of the Americas New York NY 10014 When the My POI Groups are displayed you have the following options e Show Hide similarly to built in POls you have the possibility to show or hide all POls of the selected category on the map Groups with a blue icon are displayed groups with a gray icon are hidden e New you can create a new My POI group by tapping this button You need to select an icon a name and the maximum zoom level at which the POI is still visible on the map provided you let the POI group be displayed at all You do not 45 necessarily need to create POI groups in advance You can do it while saving a new POI e Delete you can delete any of your previously saved My POI groups This will delete all POls in that group MioMap will ask you to confirm this action e Edit you can edit the attributes name icon visibility level of a previously created My POI group Edit POT Group e Left right arrows if your groups fill several pages these buttons will let you browse through them The green field left of these buttons shows the current page number and the number of pages When the list of My POIs is displayed you have the following options e Search you can shorten the list of matching POI items by filtering Just like in Find enter a few letters of the desired POI name When the number o
34. eet is important in the route it is likely that MioMap will replace the turn with several easier ones to get to the same street e Road when you exclude a road MioMap will calculate a route that does not use that road It is useful when you anticipate a traffic jam in a street used in your route or a roadblock is announced on the radio and you find that road in your Itinerary e Distances you can also find some distance buttons in this list They are similar to the ones in the Bypass list of the Recalculate menu Page 49 but these can also be used for distant parts of the route Note You need not open Itinerary if you run into a roadblock or traffic jam To get an immediate alternative route use the Bypass function of Recalculate Page 49 Note When you use this feature MioMap will keep on excluding the same part of the map from later routes until you manually delete the route Page 51 or restart MioMap 4 7 3 4 Fly Over This feature has no navigation function it merely provides a quick view of the route It will present a simulation of the route showing what you will see later when navigating Lifelike simulation Tap the Fly Over button In this mode the simulation is run at normal speed using the speed limit of the streets and roads in the route and voice instructions are also played This mode is mainly useful for demonstrating MioMap or to learn the way it works before your start your first journey Ta
35. er you want to specify the tolerance as a Fixed value offset to the speed limit or as a Percentage The slider will change depending on which mode you have chosen Both positive and negative values can be given in either offset or percentage mode 6 1 4 2 Alternative speed limit lf the speed limit of the current road segment equals or is above this limit the speed warning will use the alternative tolerance instead of the previous one Move the slider to its rightmost position to turn off the alternative speed warning Then the settings of the upper slider will determine the warning for all roads 73 6 1 4 3 Alternative speeding tolerance If the speed limit of the current road reaches the value set at Alternative speed limit this setting will replace the basic one set at the top of this screen The slider and the selector work exactly as the basic ones described here Page 73 Example to let you better understand how this feature works here is an example If you use the settings 10 mph 60 mph 5 MioMap will warn you when driving at the following speeds Speed limit Warning at 25 mph 35 mph 25 mph 10 mph 40 mph 50 mph 40 mph 10 mph 50 mph 60 mph 50 mph 10 mph 60 mph 63 mph 60 mph 5 72 mph 76 mph 72 mph 5 80 mph 84 mph 80 mph 5 6 1 5 Enable Speed Camera Warning where available Where available MioMap contains a built in database of known speed and red light cameras and you
36. es 43 4 7 2 4 Manage POI Points of Interes 44 4 7 2 5 POPU INTONMAL ON SWIG E 47 4 7 2 6 Manage TACK LOO E 47 4 7 3 ROUE TAD EE 49 4 7 3 1 Ree 49 4 7 3 2 DEENEN 51 4 7 3 3 WEEN 51 4 7 3 4 FV OVET aa S een saa een eae 53 4 7 3 5 EOI aera suse aans ba pv pasnaneaa va eae eS ee 53 4 7 3 6 IIIT EE A E AE E EE EEE EE AEE E E AEE E 54 4 7 4 Mah DUTON BE 54 4 8 Road safety cameras where available 54 4 8 1 EE 55 4 8 1 1 PIX CG CANN Cl AG EE 55 4 8 1 2 Mo Dile Cameras EE 55 4 8 1 3 BUIN CAME E 55 4 8 1 4 SECHONCONTOlCAME AS sasaosan AEEA AAA 56 4 8 1 5 FROG MGMT ene 56 482 COnmOolled tranle diecon EE 56 4383 Speed MIE CNECKESG DE 57 4 8 4 Add a new camera or edit an existing one 57 4 8 5 Change the settings of the Camera warmmimg 57 4 9 TMC Traffic Message Channel where available 57 4 9 1 LIST OF IMIG MESSAGES neal a aoe eet teed eee eet utes 58 E EG KO e ele rel CE MCN EE 58 4 9 2 1 Selecied FNiradio RE die EE 59 4 9 2 2 SUDSCHOC CN 59 4 9 2 3 Exclude Selected Stati screena 59 4 9 2 4 SNOW Excluded El e EE 59 4 9 2 5 Sorts events by distance ivpe 60 4 9 2 6 Re lait gen EE 60 4 9 2 7 Recalculate to avoid Trafic 60 Fe VAN DEE 61 5 1 Main menu Find buttons Address Favorites POI History 00 00000000 61 5 2 Selection by tapping the map 61 53 USNA UIC ae MEN E 62 5 3 1 Find an Address Street Intersection or Ciy 62 5 3 1 1 selecting the city state and country to Search wm 63 5 3 1 2 Selectin
37. es quick access to some configurable options Remember that symbols on the buttons show the state of the function they are switching to and not the one the program is currently in For example with daylight colors you see the moon while with night colors the sun is depicted on the button that switches between the two color modes 42 4 7 2 1 2D 3D Map switch This button switches between the top down and the perspective views of the map screen The states of this button are a Tas In 3D mode the map shows a perspective view You can use the tilt buttons Page 2 to change the angle of the view if they are enabled with the switch right from this one Page 43 In 2D mode the map is displayed in a conventional top down view This view is also the end of the tilt range so it can also be accessed by tilting the map up Conversely 3D mode can be switched on by tilting down in 2D mode Map view modes are described here Page 17 Note When you reach 2D view by tilting the map during navigation Smart Zoom will tit down the map as you press the Follow button Use the 2D 3D button to permanently switch to 2D view 4 7 2 2 Zoom amp Tilt switch This button makes additional map controls available The states of this button are G When this feature is turned on additional transparent buttons Page 26 appear on the left side of the map screen for zooming and tilting the map 4 7 2 3 Daylight amp Ni
38. f matching items can fit in one page MioMap will automatically display the list If you tap List any time before this happens you receive the list of matches on multiple pages e ABC Distance by tapping this button you can have the POls sorted in an alphabetical order Tapping again will return to the distance based order When you tap on any of your POls in the list you will open a new window with the details of the selected POI Here you have the following options e OK if you tap this button the map screen returns with the selected POI in the center of the screen e Edit you can edit the attributes name icon and group of the selected POI Edit My POT 46 e Delete you can delete any of your previously saved POIs MioMap will ask you to confirm this action 4 7 2 5 Popup Information switch This button enables or disables the popup information of the Cursor on the map screen The states of this button are KSE H When this feature is enabled tapping the screen activating the Cursor a radiating red dot also opens a pop up box with the selected street name house number and the name of the nearby POls if any Tip Tapping one of the blue Information icons behind the POI names shows the details of the appropriate POI item 4 7 2 6 Manage Track Logs Using MioMap it is also possible to save the track logs of your journeys This screen lets you manage all your track logs When it comes up it sh
39. f the selected point is near or at a soeed camera A window will open up that contains the same settings as in Add Cam In addition it will have a Delete button that removes the camera from the map Add POI opens the new POI capture window to let you add the selected map point to the list of your user points This menu point is only available if there are no POls near the cursor i e only the address is shown in the Popup Info window POI opens the list of POIs near the selected point These are the POIs shown in the Popup Info window If you want to add a new POI at the cursor you can do so by tapping New in the bottom left corner This menu point replaces Add POI and it is only available if there is at least one POI item near the Cursor 4 3 14 Current street No 16 This field of the Split screen shows the name or number as available of the current street or road you are driving on 4 3 15 Travel and Route data No 17 The contents of this area are different when cruising without an active route or navigating following an active route While cruising the current time is shown at the top and an analog speedometer shows the current speed and the speed limit Tap the speedometer to replace it with the current date and a digital soeedometer While navigating a route these fields show the Distance to destination the estimated time needed to reach the destination Time left the Current t
40. ffic information that may affect your route the program will warn you that it is recalculating the route and navigation will continue with a new route that is optimal considering the most up to date traffic conditions The TMC subsystem can be started from the GPS Data screen Page 34 by tapping the TMC button Note An external TMC cradle may be required to enable TMC on your device 4 9 1 List of TMC messages The main screen of the TMC section is the list of valid TMC messages ordered by their distance from your current location Tap the arrows to turn the page and see traffic difficulties farther away from your current position or press Settings to configure the TMC subsystem This opens a new window 4 9 2 TMC control center This screen shows the selected TMC source and allows you to change the TMC settings 08 4 9 2 1 Selected FM radio station The name and frequency of the selected radio station will appear at the top of this window together with signal strength information indicated by a bar similar to the GPS satellite signal strength bars on the GPS Data screen lf there are no radio stations broadcasting TMC data in your area the receiver keeps on searching You will see the frequency continuously sweeping across the FM CCIR radio band 87 5 108 MHz When you move to an area with TMC information the indicator will show the frequency and detailed information for the TMC station 4 9 2 2 Subscribe TMC
41. from your current position to a via point only Click on any of the icons to show its description A few samples of the available icons This icon shows that you need to pay toll on the recommended route This icon shows that the route contains motorways Tap the icon to see the ength of the motorways in the recommended route tal O Z DS DU This icon shows that toll roads are included in the recommended route D This icon shows that you need to board a ferry along the recommended O c ech D This icon shows that you need to pay for the ferry O 2 This icon is displayed when MioMap could not plan a route with all your road e preferences respected Sometimes it is impossible to find a suitable route ar the start or the destination 5 c SE This icon warns you that MioMap had to recommend a route that does not atch all your preferences given at the Route Parameters settings 3 The recommended route contains areas only accessible to pedestrians The recommended route contains unpaved roads The recommended route contains roads that require a permit or permission In O OD Lem OD Ga Information any other piece of relevant but not categorized information ap the icon to see the content INext page displayed when more than 5 warnings apply for the recommended route 39 4 5 3 Fit to screen Tap this button to display an overview of the wh
42. g a StreetOr a CNY EE 66 5 3 1 3 selecting a house number or the midpoint of the street 67 5 3 1 4 How to select an intersection instead of a house numbev 67 Dios IAG IN ISTO EE 68 S33 FING COOMINGICS EE 68 D34 TING E TEE 69 D020 Find one of the Favorites Home WoOfFk c cccceecceeeseeeseeeeeeeeeeeeeees 71 El EE 72 Gel GEMel al SCHING S escsessussssviceus oicnsesiossecanpaivimeuseieesaciisedeupsivimerteivedenpodensensoieiee 72 6 1 1 Daley MOC EE 72 6 1 2 Automatic Night Colors ccceccccseccecseececeeeeeseeeeeseeeeseeeeesseeeeeaeeeeas 73 SES Warn When Ke e Tee iit teeta 73 6 14 Speed Warming et 73 6 1 4 1 Speeding TOIT AINGS rasana EEEE bee saan eee ventana ee 73 6 1 4 2 Aternatve e MMM EE 73 6 1 4 3 Alternative speeding tolerance ccccccceeeceeeeneeeseeeeaeeeneeeseeeeees 74 6 1 5 Enable Speed Camera Warning where available 74 62126 oPeed Camer ere EE 74 6 1 6 1 Audible Warning WEE 75 6 1 6 2 VIISIDE Ed e ME 15 6 1 7 Set Favorite DESTINATIONS ec cccccesceceeceeeeeeteeeteceseneeseneeteneeseuess 76 6 1 8 FOULS TRECAIC UIA TION EE 76 7 8 9 6 1 8 1 PAUITOINIANG EN 76 6 1 8 2 ASK FIS EE 76 6 1 8 3 BS ele oeron EE ius aeonuuess anes senetee eae 77 Se 6 cl le Te e eee er ee ae eer mE eee ner Ea ne ere emi SE OE nei ee Ee me SE PER 77 6 2 1 Master sound VOIUME SWITCR EE 77 6 2 2 Voice guidance volumeiswitch 78 62 3 Key SOUNG Re E Ee EE 78 eek
43. ght Modes switch This button switches between the daylight and night color schemes of MioMap The states of this button are 43 Turn on or off the night colors manually to override the automatic color scheme switching Note Using this option turns off the Automatic Night Colors feature You need to re enable it at the General settings screen Page 72 to have the colors change automatically again 4 7 2 4 Manage POI Points of Interest Here you can set all the parameters of POls that you have created and the visibility of the built in POls that come with the map To go to the Manage POls screen tap Menu Settings wheel icon then tap Manage POls Manage built in POI visibility The maps in MioMap come with a huge number of POls Displaying all of them would make the maps too crowded to see how POI items are shown on the map see Page 21 In order to avoid that you can decide which POI groups to show and which ones to hide on the map MioMap has a multi level POI category system You can set the visibility of the top two levels All levels below that will be shown or hidden according to their respective category i e you can set the visibility of Petrol Stations in the Services category but all brands listed under that will either be shown or suppressed together 2h Services Se Es Transportation Shopping E Entertainment Culture Sports amp l Emergency Recreation Government Food amp Drink Lodging
44. gnore real time traffic information when planning routes Tip If you make a route planning for a future journey it may be better to turn off TMC corrected route planning 4 9 2 7 Recalculate to avoid traffic This setting is similar to the previous one Disabling it will not prevent the system from using TMC data for route planning but will not trigger an automatic recalculation when the traffic conditions change during your journey 5 Find One of the most frequently used functions of MioMap is selecting the destination Once you have the destination you can start navigating Getting to this point should be as fast as possible MioMap provides you with a versatile search engine designed to find your chosen destination after only a few taps on the screen Note If you select a location in any part of the Find system you will normally drop back to the map screen where you will have several possible actions set as start set as destination add as via point continue route with or add it to the database of road safety cameras or user POIs However if you enter the Find system from the Main menu MioMap will immediately put you into Cockpit mode and start navigation 5 1 Main menu Find buttons Address Favorites POI History As just mentioned the fastest way to find your destination and start navigating is to start from the Main menu Page 16 with one of the Address Favorites POI or History buttons These will put you
45. he direction buttons then press Enter or tap it again to see the list of subgroups Using the same action you can move deeper into subgroups e Search by name among the POls of that level tapping the Search button will bring up a text input screen to let you narrow the list of POls If you tap Search in the list of subgroups you will only search in the group you are already in e See all POls of the current group in a list tapping the All button opens the list of all points in the group or subgroup you are already in Use the Next and Previous buttons to browse through the list seam ASSET Levy Swimming Pool E 23rd amp Asser Levy PI New York 10010 New York tam Dapolito Swimmi Pool 1 Garkson St New York 10014 New York 2am Dry Dock 408 E 10th St Mew York 10009 New York Dario Ctr TF 419 47h St Union Oty 07087 New Jersey Search results are ordered by their distance from the given reference point nearest first Note In the case of POI items that you have created you can also see the results in alohabetical order Push the button with the label ABC that appears between Search and the page number Once the desired POI item is selected MioMap will show its details Tapping OK will return to the map with the selected POI in the center or starts navigating to it if the POI search was started from the Main menu Tapping the arrow in the top left corner returns to the search results Tip If you want t
46. he list item coming next in navigation is the highlighted one until you highlight another one by tapping After that the highlight remains on the item you have selected e Detailed Instructions this is the list displayed when Itinerary is opened It is the list of events in full detail All significant junctions are shown in the list even ones to be passed Instructions by tapping the Mode button once you will see the list of events that need your attention Le the list of maneuvers during the route These are the events shown in the Turn preview field and announced by the voice instructions 51 e Route summary tapping the Mode button again will show an overview of the route that contains only the significant roads and intersections 3 Srel Terminal 4 0 27mi P Terminal 4 ist 200 Se Terminal 4 Departing Flights mon C mm Van Wyck Expy SB 678 h t 3 John F Kennedy Internat onc lr In mas Show Tap this button to see the highlighted list item on the map This will help you identify route events in the list Avoid Tap this button to show a list of possibilities for modifying the route They let you recalculate the route avoiding the highlighted event and sometimes also some of the Subsequent ones e Maneuver this option avoids the highlighted action For example if you find a turn too difficult during rush hour traffic MioMap will recalculate the route excluding that turn If the next str
47. he night colors are used Set the desired backlight levels for both daylight and night modes Page 82 Note The colors mentioned and screenshots included in this manual refer to the default daytime and night color schemes They may not look the same in the schemes you have chosen Tip If you use MioMap after sunrise or before sunset look for the sun in the sky in the map background using a flat 3D view It is displayed at its actual position to give you another way to orientate and also to provide some eye candy 4 2 4 Streets and roads The similarity of MioMap to paper roadmaps is also convenient when it comes to streets the most important elements of the map concerning navigation MioMap uses similar color codes to those you are accustomed to and the width of the streets also refers to their importance so it will not be difficult to tell a highway from a small street Streets and roads have names or numbers for identification Of course this information can be displayed on the map MioMap uses two different ways to show street labels The conventional way is the same as a roadmap it displays the name of the street aligned with the street The alternative is a kind of virtual signpost stuck into the street itself You need not choose between the two modes MioMap will use the one best for the current tilt and zoom level Zoom in to have only a few streets on the map and start 19 tilting up and down to see h
48. his will show a detailed description of the current settings screen 10 3 Operating MioMap Controls MioMap is designed for easy operation All controls are operable by fingertips Wherever possible pushbuttons and lists are provided to make accessing functions or changing settings as easy as possible 3 1 Hardware buttons There is only one hardware button on your MioMap v3 3 Please refer to the provided Hardware User s Manual for more details The majority of the MioMap functions can be accessed using the touch screen The hardware buttons are the following 3 1 1 Power on off Use this button to turn the power of the MioMap v3 3 on or off any time The behavior of the device depends on how long you tap the button Standby If you tap this button shortly the device power will turn off but the system is not shut down If the device power is turned off while MioMap is running when you turn the device back on MioMap will continue the navigation as soon as the built in GPS determines the location again If you tap this button for longer appr for 5 seconds a new screen appears and you can choose between two options Shutdown this will shut down and turn off the device When you turn the device back on you need to restart the navigation program Restart this will shut down and restart the device When finished you need to restart the navigation program In all three cases while the device is switched off the GPS wil
49. ied out around a certain reference point Always look at the current reference point shown in the green field above the POI category buttons and confirm that it matches what you want To change the reference tap the Change ref button in the top right corner 69 Once you tap the Change ref button you are presented with these choices e Address you can specify an address to be searched around or a city to search in The center of this city will be used as the reference point e History the reference for the search can be selected from the History list e Coordinates you can specify a latitude longitude pair to be the center of the search e GPS Position the search will be carried out around the current location given by the GPS if it is available If no GPS position is available the last known GPS position gray arrow on the map will be used e Cursor the search will be carried out around the previously selected map point e Destination the search will be carried out around the destination of your current route The current selection is always shown in the green field at the top of the page Note The default reference point for POI search is the current GPS position if it is available or the Cursor when there is no reliable GPS position Once you have set the reference point you have the following options on the Find POI screen e Find in POI subgroups highlight one of the POI groups by tapping or using t
50. if you have selected Emergency Bicycle or Pedestrian this information will be displayed here 4 5 1 4 Time Left This is an estimated value It shows the time needed to reach the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other possible delays lf via points exist tap and tap again any of the fields to see the time needed to reach the first second etc via point 4 5 1 5 Estimated Arrival This is an estimated value It shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route The calculation cannot take into account traffic jams and other possible delays If via points exist tap and tap again any of the fields to see the estimated arrival at the first second etc via point 4 5 1 6 Destination Via point This field shows the exact address or its coordinates if the address is not available of the final destination lf via points exist tap and tap again any of the fields to see the address or coordinates of the first second etc via point 4 5 2 Warning icons The following 5 squares are normally gray Some of them turn red and show a graphical symbol in case warning s are attached to the planned route These are 38 warnings so icons always show information for the whole route even if the data fields display values
51. ill make MioMap plan the best toll free route for you 6 3 3 7 Cross border Planning By default MioMap plans routes using the border crossing points However if you live near the border you can disable border crossing with this switch to remain within one country 6 4 Language amp Units Here you can set the languages measurement units and date and time formats used by MioMap Language amp Units rag AY English US Jason Set Date amp Time Format 6 4 1 Program language This button displays the current written language of the program By tapping the button you can select from a list of available languages MioMap will have to be restarted if you change this setting MioMap will ask for confirmation before it restarts 6 4 2 Voice language This button shows the current language of the voice guidance By tapping the button you can select from a list of available languages and speakers Tap any of these to hear a sample voice prompt Just tap OK when you have selected the new spoken language 81 6 4 3 Units You can set the distance units to be used by the program MioMap may not support all of the listed units in some voice guidance languages If you select a measurement unit that is not Supported by the chosen voice guidance language you will see a red warning message under the selector 6 4 4 Set Date amp Time Format You can set the date and time format displayed by MioMap Various international formats
52. ime the estimated Arrival time at the destination and the current Speed The fields Distance Time left and Arrival time contain information on reaching your final destination 4 3 16 Distance to next turn No 18 This field shows the distance to go before reaching the next route event turn roundabout exit etc This field is only displayed when navigating a route This field also serves as a button Tap it to get to the Route menu Page 49 4 3 17 Next street Next city No 19 This field shows the road or street that comes next in the route itinerary 33 sen 1 77 0 04 06 s Seet Gei o 12 36 12 41 This field is only displayed when navigating a route 4 3 18 Approaching next turn No 20 This proximity indicator bar is only visible when approaching the next route event It appears on the screen to visualize the distance when you get closer than 300 meters 1000 feet to the next turn and it remains visible till you reach the turn This field is displayed only when navigating a route 4 3 19 Current speed limit No 21 To help you drive safely MioMap shows the speed limit of the current road while you are cruising or navigating a route This information is displayed only if it is available for the given road 4 3 20 Info Panel content No 22 The highlighted button shows which content page of the Info Panel is shown above Tap any of the other buttons to change 4 4 GPS Data screen Tap the small
53. ing 4 3 11 Sound muting No 13 By tapping this button you can quickly mute all sounds of the PNA This will not modify the volume level and the enabled or disabled status of the voice guidance or the key sounds all to be set on the Sound Settings screen Page 77 just mutes the sound output When muting is enabled the speaker icon is crossed out X Tap again to re enable sounds ed Note Sound can be muted in Sound settings Page 77 too There you have a Master switch that works together with the switch described above There is also a Master slider on that screen That you can use to fully turn down the volume of the device Setting the volume low is different from muting therefore it will not show up on the mute indicator 4 3 12 Track Log recording playback indicator No 14 When a track log is ON a red icon is displayed on the map screen This icon also functions as a button leading to the Track Log screen Page 47 where you can stop the recording or make the track log visible on the map During track log playback a green icon will blink Tapping this icon in fact tapping the screen anywhere stops the simulation gt 4 3 13 Cursor menu No 15 The Cursor is the selected point on the map marked by a red dot and radiating red circles around it or the current GPS position when it is available and Lock to Position is enabled When you tap the screen to place the Cursor the Cursor menu pops up automa
54. inger friendly buttons Note If you have chosen a program language that uses Latin letters only the ABC keyboard appears If you choose the Greek language an additional keyboard appears with Greek letters Similarly Hebraic and Cyrillic letters are available when Hebrew or Russian is chosen in Setup Languages Page 81 lf you are used to computer keyboards you may consider trying one of the QWERTY type keypads 3 2 6 2 QWERTY type keyboards QWERTY type keyboards have both letters and numbers on them Their layout is the same as of the standard QWERTY and AZERTY French keyboards To switch to your desired QWERTY type keyboard press the Keys button 14 The special keys described in the previous section are also available here 3 2 6 3 The numeric keyboard The numeric keyboard only contains numbers on huge buttons The special keys you find on the other keyboards except Space are available here as well Although QWERTY type keyboards also contain number keys when entering a house number the program offers the more convenient numeric keypad 15 4 Discovering the program through the screens The best way to discover MioMap is to explore each screen in detail and to find out how to move from one to another Read this chapter for a guided tour 4 1 Main menu MioMap starts by displaying the Main menu This is the root of the screen hierarchy but you need to return here very rarely while using the progr
55. itch e Create NMEA SIRF log independently of the normal track log you can instruct MioMap to record the native GPS data received from the GPS device MioMap is capable of working with GPS devices using either the NMEA or the SIRF protocol so the saved data will be in one of these formats These logs are saved as separate text files on the SD card and they cannot be shown or replayed in MioMap They are for post processing needs should you have any Be careful when saving native GPS data as it can soon eat up available memory 4 7 3 Route tab This menu contains options to manage different settings in the program E GC mm oo SS Lem 4 7 3 1 Recalculate This menu point is only available if an active route exists and GPS position is present 49 It brings up a menu with four options Using one of these functions you can modify the current route Route Recalculation Route Recalculation Recniciate Drop Next bee E eat ll pes Recalculate This function repeats the route calculation based on the same settings as used to calculate previously This possibility is typically used when automatic off route recalculation is disabled However you may consider using it when you travel on a road parallel to that recommended by the route In this case MioMap may not recalculate the route for some time but you can force recalculation here This is also the button you will most frequently use when the window appears automaticall
56. items a list of more than 60 pages exist for the entered pattern s MioMap stops searching and displays gt 300 at the right end of the input line Enter more letters to narrow the list Note When the name of the city contains a character that is not available on the keyboard e g apostrophe or dash MioMap considers it a space that splits the word That is why you can search for Alleyn Et Cawood with all the following search criteria A E C EtA or Al Ca 64 Tip If you have finished entering the street name and the matching names are still on more than one page just tap List and select your desired city from the list Turn the pages with the arrow buttons in the bottom right corner Tip In case you are looking for a city name that has more than one word you can reduce the list of matches faster if you enter a few letters from each word Note If any of the cities listed has named suburbs or numbered districts that also appear separately in the map a Show districts button will appear in the bottom left corner Tap this button to list the suburbs together with the main cities Now the button turns to Hide districts and tapping it will return to the original shorter result list Belgaum Engis Engihoul Antinne Bois Hoei Begun Ss lee Once you have selected the city you can continue by entering the street name as described here Page 66 Changing the state Australia U
57. items to have it shown in the center of the map r v 6 2mi E 14 Ai Diemen A9 D 12 9mi 2 8 A28 Leusden Zul 3A io Haarlem 1200 AAN A7 Waardenburgi e DES KM Tap it again to see its details Tap Yes to avoid this road segment or No to return to the map 4 6 4 Itinerary This is a list of the nearest route events the Itinerary The turn preview icon distance and the involved road or city name are shown in the list Tap the up or down arrow buttons to see more route events Tap any of the list items to have it shown in the center of the map 41 Utrecht Breda D DS s Wan i ew f y 24 Se Si A i i wae ni H s Kibs alla H Lisa bh Alt d SS d Wauwa YEeEnngsSen Follow nm 1 32mi Sp Bilthoven ST d d Nieuwe Weteri eg N234 sens ME sire Ps FLD Tap Avoid Maneuver to exclude this turn from your route Avoid Road to exclude the road that starts with this turn or tap Cancel to return to the map 4 7 Menu The Menu button can be found in the bottom left corner of the map screen Tapping this button brings up a menu that allows you to access some of the most frequently used functions of MioMap 4 7 1 Find tab The first page of the Menu is Find It lets you select a destination without first having to locate it on the map The Find menu will be described in detail later here Page 62 4 7 2 Quick tab This provid
58. l not work no position will be calculated track log will not be saved and navigation will stop 11 3 2 Screen buttons and controls The primary input channel of MioMap is the touch screen If you read on you will realize that most parts of the screen are not only used to display information but also to initiate functions by tapping Below you will find a list of the most frequently used controls in the program 3 2 1 Direct selectors some of the settings can be chosen from a short list of possible values If the values can be described graphically all values are available on the screen Tap one of the icons to set change the value 3 2 2 List selectors When the values in the list need to be named only the current value is shown sometimes together with a short description in a horizontal stripe with arrows at both ends Single Tone The arrows are buttons Tap Fa to move left in the list or tap FA to move right You need not confirm your selection As soon as you leave the screen the selected value becomes effective 3 2 3 Sliders When a feature has several different unnamed numeric values MioMap will show sliders that look like analog potentiometers to set the desired value KS 5 ay ps eee ar es Sel EEN CSC ES e Set custom backlight value for daylight L CUSLOM CACKA Va Je for UA ye gt lf the value limits are not displayed at the ends of the slider the leftmost position means the minimu
59. leg ee 78 6029 EE re Le De 78 6 3 Route parameter settnge 79 6 3 1 PAO ULC ee 79 6 3 1 1 ell GE 79 6 3 1 2 KEE 79 6 3 1 3 ECONOMICAL EE 79 O2 er 19 6 3 3 Road types to mncl de exClUde eeren a 80 6 3 3 1 Unpaved ROADS EE 80 6 3 3 2 NIOLOIWAY S tener aera 80 6 3 3 3 POOS een ee ene eee ee ee ee ee a eee ee ee eee 80 6 3 3 4 BR a 80 6 3 3 5 PEMMIL NCCOCSG ee ee uid eee 81 6 3 3 6 fe a 0c 0 cee ere ee eee eet eee eee ee eee rece 81 6 3 3 7 Cross border PIAAMING DEE 81 SE AM QUAGS El EE 81 6 4 1 Brel Lei Le fsx stsszhnentwentsexcwendaextwentoendweatooninantoontanadovainoataceinent ou 81 BAZ NOICCNANGQUAG On eses aea eNEAN Eea 81 SE ME el EE 82 644 Get Date Ge Time Fees ENEE 82 65 Advanced Seting EE 82 6 5 1 TMC SOUNO EE 82 De PaACKIONUSSUINGS ee ee EE 82 6 5 2 1 Power MAN AGS MGM EE 83 6 5 2 2 BNONING SS ssneinaan aeaa aaa 83 659 Wserdatamanagement geeiert 83 6 5 3 1 BACKUD BEE 84 6 5 3 2 Restore Dalar ar EE E aonaiiedaaniaga 84 6 5 3 3 TR EE 84 6 5 3 4 Reset Advanced SettingS ccccccccceececseseeceeeeeseeeeeseeeeeseaeeesaees 84 6394 Map e ee EE 84 6 5 4 1 Daylight Night Color profile 85 6 5 4 2 SNOW o e 85 6 5 4 3 RI We e ei 85 6 0 ONEZ Mea e n e a a 85 6 5 5 1 Enable Smat ZOOM EE 86 6 5 5 2 Enable Overview mode 86 65593 Keep position on road Cock on Hoad 86 See ee 86 Troubleshooting Gude jester enna a ee 88 esi e 90 End User License Agreement ice ticedcicadi cette theses cele ted
60. m value while the rightmost position represents the maximum value With most sliders you can check the current value on the left This control can be operated in two ways Either drag the handle to move the slider to its new position or tap the slider where you want the handle to appear the thumb jumps there immediately As with the list selectors there is no need to confirm your selection AS soon as you leave the screen the selected value becomes effective 12 3 2 4 Switches When a function can only have two values mainly Enabled and Disabled a switch is used Unlike with list selectors the horizontal line contains the name of the function and not the actual status There is a lamp on the left to show whether the function is active or not J Automatic Night Colors N Li Warn When Speeding When the tick mark is missing 2 the function is not selected When it is displayed T the function is enabled The whole strip works as a button Tap anywhere to toggle between the enabled and disabled status 3 2 5 Switches in the Quick menu The switches of the Quick menu Page 42 behave as normal switches but they look different in order to fit in with the other menu buttons TT Tap the button to toggle between the two states Remember that the sign on the button will not indicate the current state but the state you can switch it to 3 2 6 Virtual keyboards MioMap is designed in a way that you only need to en
61. mmediately jump to the Street Name Input screen with the selected city name or postcode shown at the top of the screen If the desired city is not displayed use the arrows in the bottom right corner to see more of this list Tip If during navigation you need to know the name of the city or the country you are currently in just start Find Address and read the first line of the list This function leads to a reliable result only if GPS position is available and you have not disabled Lock to Position by moving the map lf you find that the list of recently used cities contains cities you will not visit in the near future you can choose to empty the list by the Clear button in the bottom left corner Selecting a new city to search in If you are looking for a city or town or state you cannot find on the list tap Other City in the top right corner This will take you to the city name or postcode input screen where you can select the desired city by entering a few letters of its name or some digits of its postcode then select from the list of results automatically given by the program if the matching items can be displayed on one page or displayed on more pages if you tap Done after entering some letters Note Zip codes may not be available for the selected country In this case you need to enter the name of the city Note In Netherlands if you enter the whole postcode 6 digits you do not need to select the street You will
62. n front of you 4 2 3 Daylight and night color schemes The different color schemes let you adjust MioMap to the brightness of the environment Use the daylight and night color schemes accordingly Daylight colors are similar to paper roadmaps while the night color schemes use dark tints for large objects to keep the average brightness of the screen low with carefully selected colors to still keep you informed about all the necessary information on the screen At snr w AA 8 A 2 Ga Waar ES Ur S y ent i MATAS he A KI SU Tl 1 WU z KZ gt H au The map is set to automatically change between day and night mode by default but you can also change this manually using the Quick Menu Page 42 18 Note The automatic day night mode is based upon the current date and GPS position by which MioMap calculates the exact sunrise and sunset times on the particular day at the particular location Using that information MioMap can automatically switch between the color schemes a few minutes before sunrise when the sky has already turned bright and a few minutes after sunset before it gets dark Tip There are several daytime and night color schemes included with MioMap To select the one that suits your needs the best make your selection in Settings Page 85 Tip To further enhance the effect of the night color scheme you can instruct MioMap to decrease the display backlight when t
63. ngs on this page determine the way MioMap sounds 6 2 1 Master sound volume switch The loudness of MioMap is independent of your PNA settings When you run MioMap the position of this fader determines the device volume level When you exit the program the device settings return The left part of this control works as a mute button Tap to mute all MioMap sounds 1 6 2 2 Voice guidance volume switch The switch on the left can turn on or mute MioMap s audible guidance voice instructions and speed camera warning When turned on the slider on the right will adjust the loudness of voice prompts In its leftmost position the voice guidance is suppressed in its rightmost position the master volume applies 6 2 3 Key sound volume switch The switch on the left can turn the key sounds on or off Key sounds are audible confirmations of either pressing hardware buttons or tapping the touch screen When key sounds are turned on the slider on the right will adjust their loudness In its leftmost position the key sounds are suppressed in its rightmost position they are played at the master volume level Note The sound effects of MioMap are context sensitive They will be different if for example you open or close a window or you enable or disable a setting They will even let you know if you have entered enough letters of a street name to have a short list of matching streets on the screen 6 2 4 Dynamic Volume When driving a
64. nhancing the effect of the night color scheme The values are between 0 and 10 where zero means there is no backlight at all and 10 represents the maximum backlight value 6 5 3 User data management Everything that was saved pins My POls Favorites track logs etc or modified Settings History lists since MioMap was installed is stored in a user database located in the internal memory of the MioMap v3 3 Here you have options to save restore or reset the database or parts of it User Data Management 83 6 5 3 1 Backup Data You can make a safe copy of the whole user database on a memory card Tap this button to copy all user data and settings on the memory card The backup is always created with the same file name so backing up data will always overwrite previous backups Tip If you wish to keep more versions of the user database or you wish to save one particular state e g saved POIs and track logs of your holiday look for the backup file on the memory card rename it or save it to your PC Tip If you move to another PNA and you wish to keep your data and settings make a backup remove the card insert it into the other PNA then return to this Settings page and push the Restore Data button as described in the next section MioMap will then restart and all your previous POIs track logs settings city and find history lists will also appear on the new PNA 6 5 3 2 Restore Data lf you have accidentall
65. ning part of the route and available information of the roads used This estimation can be used only as a general reference It will not be able to take into account your future speed or the traffic delays In MioMap this value is shown as Time left on the Route Information screen Page 38 GPS Abbreviation of Global Positioning System This system is operated by the DoD the Department of Defense of the Unites States Government It consists of 24 satellites orbiting Earth and several ground stations to keep the satellites in sync To calculate your position your GPS device uses the signals received from those GPS satellites that are currently visible at your location You can use this service free of charge Lock on Road This function of MioMap will always keep the Green arrow representing your actual position on the nearest road This automatic feature is necessary as the position given by the GPS receiver is not perfectly accurate Under normal circumstances Lock on Road will eliminate the occasional position error If the corridor of error is too large your position may be shown over a different street on the map You can only avoid that by using good quality GPS equipment positioned so that it has a direct view to as large a portion of the sky as possible Normally Lock on Road is always active in MioMap when GPS position is available See also in Page 20 However for pedestrian use it can be permanently turned off in Advanced settings
66. nting the planned route is displayed in orange with both daylight and night colors In both cases it is the most conspicuous part of the map even when in the background of a 3D map view 23 Pi p E a ON w York 4 F i K The line of the route is displayed on the driving side of the road for two way and on the axis in case of one way streets When the map is zoomed in and the line is wide enough small arrows show the direction of the route This can be useful if you preview the route before starting the journey or when entering a complex junction 4 2 10 4 Roads in the route excluded by your preferences Although you can choose whether to include or avoid some road types in Route parameter settings Page 80 sometimes they are impossible to avoid near the starting point via points or the destination If so MioMap will display those segments of the route with an alternate color 4 3 The map screen Split screen Having explained the contents of the map the description of the other parts of the map screen follows Split screen contents 24 No ao FF O N 10 12 13 14 15 16 17 18 19 20 EA 22 19 5 21 Q hen 16 Display Turn preview n a n a n a n a Indicates that Follow to GPS position and heading is inactive Selected map point Cursor n a n a Map orientation and Overview GPS position quality Battery status Sound on or muted Track Log recording or playback n a Cu
67. o find the nearest POIs or if you are close to one of them but do not know exactly where it is or what its name is tap the All button on the very first screen of POI search and get a list of the nearest POls Use the Next button in the bottom right corner to turn the page if you cannot see the desired place on the first page of the list Tip If your PNA is a mobile phone or is connected to a mobile phone as a handsfree device a new Dial button appears if a telephone number is displayed for the selected POI Tap Dial and your PNA will call the phone number displayed for this POI 5 3 5 Find one of the Favorites Home Work lf you have already set up your favorite destinations in General settings Page 76 you can select either of them by simply tapping the button with the name on it Using the Favorites function at the Main menu it is only two taps to start navigating Note If you try to access a favorite destination that you have not yet set up MioMap will lead you to the setup page 6 Settings MioMap provides several settings in order to let you customize the functions of the program The Settings screen can be accessed directly from the Main menu screen Page 16 and from the map screens by using the battery icon Page 30 while some of its sub screens are accessible from other parts of the program 6 1 General settings These are the basic settings of MioMap 6 1 1 Safety Mode Safety mode will disable the t
68. oMap whether the point is in the Northern or the Southern hemisphere Use the button to change the hemisphere Enter numbers for the latitude Use the decimal point if the degrees minutes or seconds are not integers Use the p a button the label depends on the current cursor position inside the latitude to start entering minutes after degrees or seconds after minutes When finished tap the longitude on the right and enter it as you did latitude This time the hemisphere changing button tells MioMap whether the point is located East or West from the meridian crossing Greenwich UK Once you have entered both numbers press Done to make the selection Tip The quickest way to tell the coordinates of a point is to select it by tapping on the map or by using Find and then come to this page and read the coordinates Tip If you need to reformat coordinates to the format selected in MioMap enter the coordinates in the format you have press Done to show it in the map then come back here to see the same location in dd ddddddd format 5 3 4 Find a POI You can select your destination from the thousands of POls included with MioMap or from the ones you have previously created This screen helps you find the one you are looking for POI items are categorized to let you locate them more easily On this screen you can see the first page of the top level POI categories There are three levels altogether The search will be carr
69. ole recommended route You will jump to the Split screen with a 2D North up view so that you can check where the route takes you 4 5 4 Parameters This button opens the Route parameter settings screen Page 79 otherwise opened from the Route menu Page 49 4 6 Info Panel The right side of the Split screen is a collapsible panel with four different pages of useful travel information Below is the description of their content 4 6 1 Travel and Route data for destination and next via point This is the default page of the Info Panel The contents of these fields have already been described earlier Page 24 4 6 2 Nearby POIs This is a list of the nearest POls The icon name distance and direction of the POls are shown in the list The POls are numbered The number also appears on the map for easy recognition Hilversum Amersfoort Tap the up or down arrow buttons to see more POls Tap any of the list items to have it shown in the center of the map Tap it again to see its details 4 6 3 Nearby TMC events where available Where available this is a list of the nearest TMC events It may be necessary to use a TMC external cradle to enable this function The icon distance and the involved road name are shown in the list 40 The events are numbered The number also appears on the map for easy recognition 10 A27 Hilversum Tap the up or down arrow buttons to see more TMC messages Tap any of the list
70. ome cameras stand by the roadside looking in one direction measuring one or both directions of the traffic They measure your current speed For these cameras you can specify the controlled traffic direction and the speed limit MioMap will warn you when you approach these cameras in the measured direction If your speed exceeds the speed limit near the camera a special warning sound will be played These cameras are displayed with the following symbol 4 8 1 2 Mobile cameras some cameras are operated from vehicles The database contains some typical places of these mobile cameras They are not always operational at the given location and the speed limit is not specified for them The warning is similar to fixed cameras but as there is no speed limit given only the proximity is announced These cameras are displayed with the following symbol 4 8 1 3 Built in cameras some cameras are built in traffic lights They work like fixed cameras but they are difficult to spot The warning for proximity and speeding is the same as for the fixed cameras These cameras are displayed with the following symbol 55 4 8 1 4 Section control cameras These cameras work in pairs and do not measure your current speed but your average speed between the two cameras Both will identify your car and record the exact time you pass them The difference between the two points of time will be used to calculate your average speed MioMap will
71. on or City Searching for a city a street an intersection or an exact address can all be done in the Find Address module If you know at least a part of the address this is the quickest way to find the location Note We have provided a smart keyboard to guide you to the valid choices and prevent typing errors The following illustration shows the structure of the address search module There are five levels Country State City Street and Address The state level appears only in case of some countries e g Australia USA The list of recent cities and states is the entry point of the module The green rectangles are the exits You can complete your search by selecting the center of a city the midpoint of a street an intersection of two roads or an exact address _ Select Country Leey Only in Ausiras amp USA Select State Leva A f Select Recent Find City pn TC T Lai 5 z gg You enter the module at Level 3 From this point you can go forward down to give the name of the street then the house number or intersection or backward up to change the city state or country to search 5 3 1 1 Selecting the city state and country to search in The first screen of the address search module is the list of recently used cities and states in Australia The first line of the list is always the city you are in or near to Should the city you are looking for appear on the list just tap it and you will i
72. on the respective Find screen and as soon as you pick a destination MioMap will immediately show the Split screen and start navigation This means that if you plan your route to one of your Favorite destinations you only need two taps e g Favorites then Home to start navigating You will find similar buttons in the Find menu Page 62 accessible from the map screen Activated from the map screen they will only move the cursor to the desired location but will not directly initiate navigation 5 2 Selection by tapping the map It is very easy to set your destination using the map Just browse to your desired destination on the map tap it and the Cursor menu with the possible actions will then open automatically Note When appearing automatically the Cursor menu remains open for a few seconds only If you decide not to choose any of the actions listed the menu closes automatically When you open it manually it will remain until you close it or switch to another screen Tip If you want the selected point shown in the center of the map close and reopen the menu or wait until it closes and open it again By opening the Cursor menu manually the map will be moved to have the selected location in the center 5 3 Using the Find menu The Find menu is accessible by the Menu button of the map screen Page 16 The Find menu gives you various possibilities for selecting a location 5 3 1 Find an Address Street Intersecti
73. ost one is the final destination and you can see your via point flags along the line spaced in proportion to their distance The Green arrow representing your position will travel from the left to the right giving you visual feedback of your journey When you reach a via point it becomes the starting point of the route the past will be deleted the line with all the other via points will be modified instantly and the arrow jumps back to the left When MioMap needs to recalculate the route the arrow will not jump back to the left as when reaching a via point but it may drift a bit as the length of the new route may be different from the previous one When the data corresponding to the entire route is displayed in the fields below the line is colored the same way as the route line shown on the map When you see data 3 7 that belongs to a via point the route is colored only up to that via point The rest of the line remains gray 4 5 1 2 Distance Left This is the distance you need to travel on the route before reaching your final destination lf via points exist tap and tap again any of the fields to see the distance to reach the first second etc via point 4 5 1 3 Method This field shows how the route was calculated It either displays the Route or the Vehicle field from the Route parameter settings If you have chosen Car Taxi or Bus the type of the route Fast Short or Economical will be displayed here
74. other street names just enter the whole name press List and the exact match will be the first in the list This way you can easily find even very short street names As soon as you select a street you are automatically taken to the House Number Input screen Page 67 5 3 1 3 Selecting a house number or the midpoint of the street Once the country the city and the street name are selected you are asked to give the house number using the numeric keypad The range of available house numbers for the chosen street is shown in the input field before you begin entering the figures ER Roosevelt Ave lt Enter House Number 1 199 gt Enter the number tap Done and MioMap will show you the selected location on the map or will start navigating immediately if you have selected Find Address at the Main menu screen Note House numbers may not be available on the map of your region Ask your local dealer for details Tip If you do not know the house number just press Done and the midpoint of the street will be used as the selected location 5 3 1 4 How to select an intersection instead of a house number lf you do not know the house number or it is easier to pinpoint the location with an intersection press the Find intersection button in the top right corner and select the desired street name from the list of available intersections of the previously selected street displayed in the top center of the screen The cro
75. ouch screen above 10 km h 6 mph to keep your attention on the road You are still able to use the hardware buttons but you cannot set a new destination or change the settings When you disable Safety Mode MioMap will warn you 72 6 1 2 Automatic Night Colors Using the automatic night mode MioMap will change between the daylight and night color schemes a few minutes before sunrise and a few minutes after sunset based on the time and location information provided by your GPS Once you set a permanent color scheme in the Quick menu Page 43 this automatic mode turns off If you need MioMap to switch between colors for you again you need to re enable this feature 6 1 3 Warn When Speeding Maps may contain information about the speed limits of the road segments MioMap is able to warn you if you exceed the current limit This information may not be available for your region ask your local dealer or may not be fully correct for all roads in the map This setting lets you decide whether you want to receive the warnings or not 6 1 4 Speed Warning Options When speed warning is turned on the values of these controls determine when the warning will be triggered You can set two different kinds of behavior for the warning one is applied up to a certain speed limit and the other one is used above that 6 1 4 1 Speeding tolerance MioMap will warn you when you exceed the speed limit by the amount specified here Select wheth
76. ow MioMap switches between the two modes in an instant Note The automatic switching is on even when using Smart Zoom At first you may find it odd but later you will discover how it adjusts the displayed information to the current view of the map It is important as the driver must be able to read the map at a glance Tip If you do not want to be bothered by street names during navigation turn them off in Map Options Page 85 4 2 5 Other objects To help orientate you the map also contains objects that have no other navigating function than to help you recognize your location on the map These are surface waters large buildings forests etc Tip These objects are normally displayed using textured polygons that look natural to the eye You may wish to switch the textured display off Page 85 to free some of the resources of your PNA by replacing textures with plain colored surfaces 4 2 6 Current position and Lock on Road When your GPS position is available a Green arrow shows your location on the map The direction of the arrow represents your heading The arrow is sized and vertically rotated with the zoom and tilt levels to always look realistic A1 E231 f A1 E231 Wi MioMap has a built in Lock on Road feature that always puts the position arrow on the road on the axis of the street in case of one way streets or on the side of the 20 road where you drive e g on the right in the United
77. ows a list of all track logs already saved Bac saved at 2006 05 05 16 33 49 Woord 2007 02 15 L Paris 2007 03 01 Bach saved at 2005 05 05 15 33 34 Maren To Utrecht 2007 03 20 uo baM The original name of a track log is the date and time when it was recorded You can change their name to something more meaningful if you wish Each track log has a color shown to the left of its name when the track log is visible on the map If the track is not visible an underscore character is shown here Tapping the line of the highlighted track log will toggle between showing and hiding that log The track log will be drawn on the map using the color next to its name 47 When a track log is being recorded a new line appears in this list with an underscore as newly recorded track logs are not shown in the map normally Tip If you wish to see the track log currently being recorded tap on it twice to make it visible In this screen you have the following options e Record this will initiate track log recording A new line appears in the list and GPS position data will be saved until you stop the recording or exit MioMap A red icon Page 30 is shown on the map screen to let you know that a recording Is in progress Tapping that icon opens this Track Log screen e Stop recording if recording is in progress this buttons stops it e Info this button opens a screen that shows the track log details and lets you e change
78. p anywhere on the screen to stop the simulation 4 7 3 5 Edit Tap Edit to see the list of all points used in the route The first item in the list is the departure point of the route without a valid GPS position the last reached via point if you open the list during navigation or the point where MioMap most recently recalculated the route This means the list is permanently updated and via points drop out during the journey The last item in the list is your final destination New York Grand Opera La W 57th St New York 10019 Washington Square Park New York John F Kennedy Internat k n F Kennedy Expy New York 11430 Use the arrows on the right to browse through the list and tap any line to highlight it You can perform the following operations e FM Add you can add a new route point or a new final destination if the highlighted item is the last one in the list after the selected point The Find menu opens automatically to let you search for an address POI coordinates one of your favorite destinations or select a point from the History list As soon as you select any of these MioMap returns to the Edit screen and your selection appears right under the highlighted line e Delete you can delete the selected point from the list If the highlighted item is the last one in the list the previous via point will be promoted to be the final destination e fa Optimize you can optimize the order in which you will drive thro
79. p orientation and Overview No 10 You can view the map screen in three different presentation modes This switch will cycle through them in the following order The usual map orientation for navigation is Track up It means MioMap rotates the map during navigation to always face the direction of your travel In this mode an arrow compass points towards your actual heading A Tap this icon to switch to North up mode Now the map is fixed to keep facing North The icon and map change to show the new rotation mode N A Tap the icon again to enter Overview mode This mode looks similar to the North up mode with one difference the zoom level in this mode has a fixed default to give you a better look of where you are on a 2D view map You can change the zoom level at any time this will not cause the Follow button to appear but when entering Overview mode later the default zoom level will be restored The arrow representing your position will be fixed in the middle of the screen When you move the map in Overview mode the Follow button will appear and when pushed it will move the map to have your current position in the middle of the map again You can set up MioMap so that it will switch to Overview mode during navigation when the next turn is far away You can specify this distance and the fixed zoom level of Overview in Advanced settings Page 86 An airplane icon indicates Overview mode Tap the icon again to return to
80. r restart MioMap Zoom In and Out The Zoom function is used to change the scale of the map Use Zoom In to scale down the map to see less of it but in more detail and use Zoom Out to scale the map up to have a broader view of that part of the map with fewer details See also Page 18 92 9 End User License Agreement Please do not operate enter data into or obtain data from this product while driving Failure to pay proper attention to the operation of your vehicle could cause death injury or material damage When using this product please park your vehicle safely first and must always observe traffic regulations and safety requirements You use this product at your own responsibility and risk Mio Technology Limited shall not assume any responsibility for damages arising from this product during driving or transportation or any violation of traffic regulations or safety requirements for any purpose 93
81. rence will be displayed in alternate color on the map 6 3 3 1 Unpaved Roads Unpaved roads are excluded by default as they can be in a bad condition and you usually cannot reach the speed limit on them 6 3 3 2 Motorways When driving a slow car or towing another vehicle you may prefer not to take motorways 6 3 3 3 Ferries The accessibility of temporary ferries is not necessarily included in the map data Furthermore you may need to pay fare so you may consider disabling them from the preset enabled status 6 3 3 4 U turns Although displayed amongst road types this is a type of action Most drivers prefer to replace them with a few normal left and or right turns in the next few junctions so it is disabled by default Turning back on dual carriageways is not considered as a u turn Note Via points are handled as stopovers with regards to u turns It means disabling u turns on this page will avoid u turns during the entire route if possible but when reaching a via point the following part of the route may be planned starting in the opposite direction 6 3 3 5 Permit needed To use some roads or enter some areas you may need special permit or permission from the owners These roads are excluded from your routes by default Use this switch if your vehicle is authorized to enter 6 3 3 6 Toll Roads Toll roads are included in your routes by default If you wish to travel more to avoid paying a toll disabling them w
82. roaching a turn to give you a better view of the upcoming maneuver If you manually change the view angle Smart Zoom will no longer tilt the map by itself automatic zooming and rotating remains active You need to tap the Follow to return the tilt control to Smart Zoom If you are on the Split screen MioMap will do this automatically if you leave the display untouched for 30 seconds Note 3D view is only useful for navigation As you zoom out the view angle will automatically be raised When finally 2D view is reached these buttons disappear When you zoom back in 3D view will gradually return 4 3 4 Follow mode lock to GPS position and heading No 6 This semi transparent icon is displayed if GPS position is available and the map has been manually removed It also appears when you scale or tilt the map while Smart Zoom is enabled Follow Normally MioMap positions the map to keep the GPS position visible somewhere on the map when North up orientation is selected or always at the bottom center of the map when Track up orientation is selected lf you manually move the map it will freeze the map in the new position To return to the GPS position use this Follow button When Smart Zoom is enabled scaling or tilting the map also stops the automatic zooming or automatic tilting respectively To reactivate Smart Zoom tap this button Note When the Split screen is open you do not need to tap the Follow button Ju
83. rred for fast and normal cars 6 3 1 3 Economical This setting is a wise combination of the previous two Although basically going for the fastest solution if there is another route taking a bit more time but a lot less distance compared to the fastest one MioMap will choose this one instead to save fuel 6 3 2 Vehicle You can set the type of the vehicle that you will use to navigate the route Based upon this setting some of the road types will be excluded from the route e g motorways for pedestrians or some of the restrictions may not be taken into account e g emergency vehicles have no restrictions Furthermore when Bus is chosen the program assumes that high speeds cannot be achieved and this information is taken into account when calculating the route the estimated time enroute ETE and the estimated time of arrival ETA Available values e Car 79 Taxi Bus Emergency Bicycle Pedestrian 6 3 3 Road types to include exclude To let the route fit your needs you can also set which road types are to be considered for or to be excluded from the route if possible Note Excluding a route is a preference It does not necessarily mean total prohibition If your destination can only be accessed using some of the excluded road types MioMap will use them but only as much as necessary In this case a warning icon will be shown on the Route Information screen Page 36 and the road not matching your prefe
84. rrent street kkk Travel and Route data Distance to next turn Next street KKKK Approaching next turn Current speed limit The active content tab of Info Panel 11 10 8 18 Pa HERE 17 onan 12 51 13 02 je Control Opens Route menu Zooms in optional Zooms out optional Tilts down optional Tilts up optional Re enables Lock to Position Smart Zoom Opens Popup Info and Cursor menu Opens and closes Info Panel on the right Opens Menu Find Quick Route Main Switches North up Track up and Overview Opens GPS Data screen Opens Settings Enables disables muting Opens Track Logs screen Opens Cursor menu n a Opens Route Information screen Opens Route menu n a n a n a Changes the content of Info Panel Contents differ when a route is active 25 Appears only when a route is active Appears only when a route is active and the next turn is near e Appears only if speed limit is known for the current road 4 3 1 Turn preview No 1 When the first default page of the Info Panel is shown and there is an active route this field shows a graphic illustration of the next maneuver For example when you approach a turn an arrow will show whether it is a slight normal or sharp turn When showing a roundabout the number of the exit is also given in the picture This field also serves as a button Tap it to get to the Route menu Page 49 4 3 2 Zoom in and ou
85. satellite dish icon on the Split screen to open this window The GPS Data screen is a collection of information received from the GPS device and it also serves as the entry point to the following screens e TMC where available e Time Sync d Em SS A Ee LES 40 34 4 4 1 GPS data displayed The virtual sky on the left represents the currently available satellites The satellites are shown at their current positions The GPS receives data from both the green and gray satellites Signals from the gray satellites are only received while green ones are used by the GPS to calculate your current location On the right you can see the satellite signal strength bars Dark bars are for the gray and orange bars are for the green satellites To identify satellites use their numbers also shown in the virtual sky The more satellites your GPS tracks the green ones the better your calculated position will be Additional pieces of information on this screen are current position in latitude longitude format elevation speed date time and calculated accuracy Note Accuracy can be affected by several factors the GPS cannot take into account Use this accuracy information only as estimation There are two icons on the left to show the status of the GPS connection and the quality of reception 4 4 2 GPS connection indicator In the middle to the left there is a lamp similar to the ones used for switches
86. ssing of the two streets will be the selected point 67 5 3 2 Find in History lf you have used Find before or saved map points as POls or picked and used points of the map before they all appear in the History list This list is ordered by the time the points were last used The most recently used locations are always at the beginning of the list Just pick any of the recent locations as your destination Here you have no possibility to reorder the list or filter it by name but the Next and Previous buttons let you browse through the complete list to find your preferred point 5 3 3 Find Coordinates MioMap also lets you enter your destination by map coordinates The coordinates need to be in latitude longitude format and based on the WGS84 earth model the one used by most GPS devices When you enter this page the coordinates of the current GPS position or the selected map point the Cursor if Lock to Position is inactive are shown at the top of the display The coordinates are always shown in decimal degrees format but you can enter the coordinates in any of the three latitude longitude formats decimal degrees degrees and decimal minutes or degrees minutes and decimal seconds You can even enter the latitude and longitude in different formats 68 Entering a latitude longitude pair is easy The left field contains the latitude It starts with an N North or S South letter This tells Mi
87. st wait for 30 seconds without tapping the screen and MioMap will automatically re enable Lock to Position and or Smart Zoom If you tap the screen during this period the 30 seconds countdown will restart 4 3 5 Cursor No 7 As described earlier Page 21 if you tap the map somewhere or select one specific item in Find Page 61 it will become the selected point on the map marked with a small red dot and radiating red circles to make it conspicuous You can use this point as starting point via point or destination for your route you can search for a POI near it mark it with a pin or save it as a POI Note When GPS position is available the Follow button will appear indicating that you have disabled Lock to Position Tapping the Follow button will re enable the position lock and move the cursor back to the current GPS position The same happens when MioMap restores Lock to Position automatically on the Split screen after 30 seconds of inactivity 4 3 6 Info Panel No 8 This button opens and closes the Information Panel on the right side of the Split screen There are 4 pages of this panel The first one Travel Data will be explained in this section The rest of them are described here Page 34 4 3 7 Menu No 9 This button opens the Menu with the Find engine the Quick menu the Route menu and the exit button that takes you to the Main menu screen The Menu will be described in detail later Page 42 4 3 8 Ma
88. sts stuck into the streets Page 19 If you switch these signs on it will be easier to recognize your location on the map if you turn them off it will be easier to see the road geometry Note You can only disable street names and POI icons if MioMap follows your position AS soon as you move the map and Lock to Position Page 27 is disabled street names and icons become visible again Tap Follow to re enable Lock to Position and have the labels and icons disappear again 6 5 4 3 Textured Polygons Enable textured polygons and have rivers lakes forests and other large objects displayed in a more realistic and attractive way on the map Disabling it will lead to uniform areas but better performance See Page 20 6 5 5 Smart Zoom Smart zoom is a lot more than just a usual automatic zoom While navigating a route when approaching a turn it will Zoom in and raise the view angle to let you easily recognize your maneuver at the next junction If the next turn is at a distance it will Zoom out and lower the view angle to be flat in order to let you see the road in front of you or it can even switch to an Overview mode to let you follow your position on the map While cruising if there is no active route and you are just driving Smart Zoom will zoom in if you drive slowly and zoom out when you drive at high speed These automatic features can be set up on this screen 85 6 5 5 1 Enable Smart Zoom Use this switch to en
89. t No 2 amp 3 These semi transparent buttons are only displayed if Zoom amp Tilt is enabled in the Quick menu Page 43 e EA Zoom will change the scale of the map Zoom out shows a larger part of the map while Zoom in shows a smaller part of the map in more detail The automatic Smart Zoom function will do the necessary zooming for you when navigating zooms out if the next turn is at a distance to let you see far ahead and zooms in when approaching a turn to give you a better view of the upcoming maneuver If you manually change the zoom level Smart Zoom will no longer scale the map by itself automatic tilting and rotating remains active You need to tap the Follow button Page 27 to return the zoom control to Smart Zoom If you are on the Split screen MioMap will do this automatically if you leave the display untouched for 30 seconds 26 4 3 3 Tilt up and down No 4 amp 5 These semi transparent buttons are only displayed if Zoom amp Tilt is enabled in the Quick menu Page 43 F t This function modifies the vertical viewing angle of the map in 3D mode You can change the angle in a wide range starting from a top down view 2D view is seamlessly integrated all the way to a flat view that lets you see far ahead The automatic Smart Zoom function will do the necessary tilting for you when navigating gives a flat view if the next turn is at a distance to let you see far ahead and raises the angle when app
90. t high speed the noise in the car may be too loud to clearly understand the voice guidance messages and to perceive the key sounds Using Dynamic Volume you can instruct MioMap to increase the volume when your speed exceeds a certain minimum and reach its highest volume determined by the Master volume slider in Sound settings at the given maximum speed Tap the Dynamic Volume button to turn on the feature This will also open the screen where you can set the minimum and maximum speeds Dynamic Volume O om ww 6 2 5 Attention Tone lf this is set to Disabled the voice guidance will sound without a preceding attention tone Setting it to Single Tone will initiate a single attention tone before the instructions while Double Tone will use a double tone 78 6 3 Route parameter settings This is a very important page Settings here determine how routes will be calculated This screen is directly accessible from the Route Information screen Page 36 Route Parameters Zz Drees SR 6 3 1 Route Here you can choose from three different route types 6 3 1 1 Short Choosing Short will result in a route that has the smallest total distance of all possible routes between the given points This is usually preferred by pedestrians cyclists or slow vehicles 6 3 1 2 Fast Choosing Fast will result in the quickest possible route given that you can travel at or near the speed limits on all included roads This is usually prefe
91. tc Active route A route is an itinerary planned to reach your chosen destinations A route is active when it is used for navigation MioMap has only one route at a time and it is always active until you delete it reach the final destination or exit MioMap When there is more than one destination to reach the route is cut into different legs from one via point to another Only one of these legs can be active at one particular time The rest of them are unused and shown in a different color on the map Automatic route planning Autorouting You only need to set up your destination and based on its map the software will automatically figure out which roads you need to take and the turns you need to make to get there MioMap will let you select multiple destinations and customize some important routing parameters Page 79 Automatic route recalculation If this function is enabled Page 76 MioMap recalculates your route if you deviate from it When you miss a turn or avoid a roadblock MioMap waits for a few seconds to be sure you do not follow the route any more you can fine tune it in Advanced settings then recalculates the route based upon your new position and heading 90 Automatic day night colors Based on the time and position given by the GPS device MioMap is able to calculate when the sun rises and sets at your current location on this particular day Using that information MioMap can change between the day and the night
92. ter letters or numbers when it is inevitable In these cases a full screen keyboard pops up that can easily be operated with your fingertips You can choose between a separate ABC and numeric keypad or a set of QWERTY type keyboards that contain both letters and numbers MioMap will remember your last choice and offer it the next time you need to enter data With this smart keyboard you are offered only the letters matching any entry of the database all the other letters turn grey The alphabetic keyboards in MioMap do not contain special characters because you do not need to enter accents when searching for a destination Type only the base letters the letter most similar to the accented one and MioMap will search for all their combinations in the database e g for the French street Cit Berg re you only need to type Cite Bergere and the rest is done by the program When you type in POI or track log names MioMap will automatically turn all initials into capitals to create names that look pleasant 13 3 2 6 1 ABC type keyboards These keyboards contain only letters Latin Hebraic Greek or Cyrillic If you wish to enter numbers you need to tap the Keys button to switch to the numeric keyboard Use Backspace arrow pointing left to delete the last letter you have entered if you have made a mistake tap Space to enter more words and hit List or Done to finish entering the text This type of keyboard has large f
93. this location before the destination of the route This is the way to build a multi point route in reverse order when you wish to insert a stopover go to A but 31 32 first get some fuel at B or want to influence the direction of the route This menu point works only if a route is already active Remove Via removes the via point near or at the Cursor The route will be recalculated immediately excluding the deleted point This menu point replaces Add Via and is available only if the Cursor is near or at a via point Continue add a new destination to be reached after the previous destination The new destination replaces the old one which is now demoted to a via point This is the way to build your multi point route in straight order when you wish to visit several destinations go to A then to B This menu point is available only ifa route is already active Add Cam this button will place a soeed camera at the position of the Cursor A new window opens where you can set the type of the camera fixed mobile built in or section control camera the direction of the monitored traffic your direction the opposite direction both directions or all directions and the speed limit If the map contains speed limit information this will be the default value for Camera Speed Edit Cam you can edit the parameters of the camera near or at the Cursor or delete it This menu point replaces Add Cam and is available only i
94. tically to give you the list of possible functions you can use the Cursor for At the same time Popup Info street name house number and the list of POls nearby appears near the selected map point if Popup Info is enabled in the Quick menu Page 42 lf you do not use the Cursor menu in a few seconds it will automatically vanish back to the bottom of the screen and Popup Info disappears too You can have them reappear by reopening the Cursor menu using the arrow in the bottom right corner When you open the menu manually it will stay on until you close it or switch to another screen Tip If you want to see the map around the Cursor close the Cursor menu and reopen it When this menu is opened manually the map is always moved to have the cursor in the center A E F gt a a amp e bene The content of the Cursor menu is slightly different if there is an active route already planned You have the following options e Start use the Cursor as the departure point for your route This menu point is available only when there is no active route e Route To use the Cursor as the destination of your route This button is to start a new route The previous route if it exists will be deleted and replaced If a multi point route is active MioMap will ask you whether you really want to delete it together with all its via points e Add Via by inserting the selected map point as a via you instruct MioMap to cross
95. tion Tip Tap the map on or near a POI item to see the list of the names of the nearest POls in a popup list if it is enabled Page 47 To see the details of a particular PO in the list tap the blue 7 icon on the right If you have too may POIs nearby this list may not be complete In the Cursor menu Page 31 there is a button called PO that leads you to the screen of all nearby POI items There you can open them one by one to see their details and select any of them as a route point 4 2 9 Road safety cameras Road safety cameras such as speed cameras and red light cameras are special POI types in MioMap They are described in detail here Page 54 4 2 10 Elements of the Active Route MioMap uses a multi destination routing system in which more elements can be distinguished The start point your current location if GPS position is available is where your route begins the destination is where you finally arrive and you can optionally set up via points as well which you pass by during your journey The whole line of the route along with the inactive legs is shown on the map 4 2 10 1 The start point via points and the destination These points are represented by flags 4 2 10 2 Animated turn guidance Animated arrows represent all route events other than the above mentioned special points These arrows show the direction in which you need to continue your journey 4 2 10 3 The route line The line represe
96. ugh the via points if there is no specific order you would like to keep When tapping this button MioMap reorders the list instantly to save you time and fuel Optimization 53 is for via points only Your starting point and destination remain in their positions of course e Ba Up and Down using these buttons you can reorder the list by moving the highlighted item up or down in the list 4 7 3 6 Info This button opens the Route Information screen described here Page 36 This screen shows information about the current route and has a few additional options to check and modify your active route Route Information a ak Fit To Parameters Screen 4 7 4 Main button The Main button at the bottom right corner leads to the Main menu screen described here Page 16 4 8 Road safety cameras where available Road safety cameras such as speed cameras and red light cameras are special POI types in MioMap The application can warn you when you approach one of these cameras You can fine tune this warning in General settings Page 72 You can save camera locations manually It is described in detail at the Cursor menu Page 31 Speed cameras are displayed with small camera symbols on the map Note In North America safety camera locations are often not disclosed or available and have to be manually added as appropriate 04 4 8 1 Camera types There are four types of soeed cameras 4 8 1 1 Fixed cameras s
97. warn you when you approach one of these cameras but as you pass by the warning stays on and your average speed is measured until you reach another camera of this type If your average speed exceeds the speed limit between the two cameras you will receive the same special warning sound as with the other camera types Note In the rare case MioMap cannot register the moment you pass the second camera e g it is placed at the exit of a tunnel where GPS position is not yet available the warning will continue Just tap the camera symbol displayed on the screen to stop the warning These cameras are displayed with the following symbol 4 8 1 5 Red light cameras These cameras check if you obey traffic lights or not The warning is similar to fixed cameras but as there is no speed limit given only the proximity is announced These cameras are displayed with the following symbol 4 8 2 Controlled traffic direction The different cameras can measure the speed of one direction of the traffic both directions or even several directions in an intersection when they are mounted on a rotating base MioMap warns you only if you drive in a measured or possibly measured direction The measured direction of the cameras is displayed with the following symbols 06 4 8 3 Speed limit checked As additional information the speed limit checked by the camera is given for fixed built in and section control cameras When you manually
98. with some of them 2D 3D GPS reception The GPS receiver uses satellite signals to calculate its your position Depending on the current positions of the ever moving satellites in the sky and the objects in your environment the signal that your GPS device receives may be weaker or stronger Your GPS needs strong signal from at least four satellites to give a three dimensional position including elevation If fewer satellites are available it may still be possible to calculate the position but the accuracy will be lower and the GPS device will not calculate elevation This is called 2D reception MioMap shows the quality of reception on the GPS Data screen Page 35 and both map screens Page 29 Note that 2D and 3D GPS receptions have nothing to do with the 2D and 3D display modes of the map That is a way of representing the map on the screen independently from the GPS reception Accuracy The difference between your real position and the one given by the GPS device is affected by several different factors The GPS is capable of providing a guess of its current error based on the number of satellites it can receive a signal from and their position in the sky This information is shown in MioMap on the GPS Data screen Page 34 Use it as a general reference only Note that several other factors affect the real accuracy some of which the GPS is incapable of estimating e g signal delay in the ionosphere reflecting objects near the GPS device e
99. y provided that the manual route recalculation is set Page 76 Drop Next Via Point Delete Route You can modify the route to skip the next via point if you decide it is no longer needed For example you may have added the via point only to influence the route but you do not want to actually reach it or you have already almost reached it and MioMap still Keeps on navigating towards that point When there are no via points left only the destination the name of this button turns to Delete Route and it cancels the navigation Bypass When you run into a traffic jam or roadblock you may want to have MioMap calculate a route that departs the original route as soon as it can You will need to select the minimum distance along the original route where your new route is allowed to rejoin the original route Select the one you feel appropriate for the traffic difficulty you face Note This function is to give you an alternative for the next section of the recommended route To change later parts of the route or to avoid specific streets or turns use the Avoid function in Itinerary instead Page 51 Note When you use this feature MioMap will keep on excluding the same part of the map from later routes until you manually delete the route Page 51 or restart MioMap Cancel This option returns directly to the map screen without recalculating the active route If you choose this option when manual route recalculation is
100. y deleted things or you have created a number of temporary items and you do not wish to delete them one by one you can tap this button to restore the state of MioMap to the latest backup By tapping this button you will lose all of the changes made since the time of the latest backup MioMap will warn you about this before overwriting the current database with the backup 6 5 3 3 Clear Data This button will delete all user data It is a reset to factory settings Tapping this button means you lose all your saved data and customized settings MioMap will warn you about this 6 5 3 4 Reset Advanced Settings There are a multitude of Advanced settings in MioMap Some changes may cause MioMap to behave in an unsatisfying manner Tap this button to restore the default settings 6 5 4 Map options You can set a few parameters determining the appearance of the maps in MioMap 84 6 5 4 1 Daylight Night color profile MioMap comes with different color schemes for both daylight and night use There is always one selected daytime scheme and one selected night time scheme MioMap uses these when switching from day to night and back Tap the appropriate button and select a new scheme from the list 6 5 4 2 Show Street Labels You can set whether or not to see the names of the streets and the POI icons on the map when driving Based on the current zoom and tilt levels street names are displayed either aligned with the street or on signpo

Mercedes-Benz 2011 GL350 BlueTEC SUV Automobile User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents